summaryrefslogtreecommitdiffstats
path: root/generic
diff options
context:
space:
mode:
Diffstat (limited to 'generic')
-rw-r--r--generic/tclIO.c157
-rw-r--r--generic/tclIO.h5
2 files changed, 65 insertions, 97 deletions
diff --git a/generic/tclIO.c b/generic/tclIO.c
index 9e1a723..0716074 100644
--- a/generic/tclIO.c
+++ b/generic/tclIO.c
@@ -284,7 +284,7 @@ static int WillRead(Channel *chanPtr);
#define IsBufferEmpty(bufPtr) ((bufPtr)->nextAdded == (bufPtr)->nextRemoved)
-#define IsBufferFull(bufPtr) ((bufPtr)->nextAdded >= (bufPtr)->bufLength)
+#define IsBufferFull(bufPtr) ((bufPtr) && (bufPtr)->nextAdded >= (bufPtr)->bufLength)
#define IsBufferOverflowing(bufPtr) ((bufPtr)->nextAdded > (bufPtr)->bufLength)
@@ -1148,15 +1148,6 @@ Tcl_UnregisterChannel(
*/
if (statePtr->refCount <= 0) {
- /*
- * Ensure that if there is another buffer, it gets flushed whether or
- * not we are doing a background flush.
- */
-
- if ((statePtr->curOutPtr != NULL) &&
- IsBufferReady(statePtr->curOutPtr)) {
- SetFlag(statePtr, BUFFER_READY);
- }
Tcl_Preserve((ClientData)statePtr);
if (!GotFlag(statePtr, BG_FLUSH_SCHEDULED)) {
/*
@@ -2490,8 +2481,6 @@ FlushChannel(
ChannelState *statePtr = chanPtr->state;
/* State of the channel stack. */
ChannelBuffer *bufPtr; /* Iterates over buffered output queue. */
- int toWrite; /* Amount of output data in current buffer
- * available to be written. */
int written; /* Amount of output data actually written in
* current round. */
int errorCode = 0; /* Stores POSIX error codes from channel
@@ -2511,62 +2500,57 @@ FlushChannel(
}
/*
- * Loop over the queued buffers and attempt to flush as much as possible
- * of the queued output to the channel.
+ * Should we shift the current output buffer over to the output queue?
+ * First check that there are bytes in it. If so then...
+ * If the output queue is empty, then yes, trusting the caller called
+ * us only when written bytes ought to be flushed.
+ * If the current output buffer is full, then yes, so we can meet
+ * the post-condition that on a successful return to caller we've
+ * left space in the current output buffer for more writing (the flush
+ * call was to make new room).
+ * Otherwise, no. Keep the current output buffer where it is so more
+ * can be written to it, possibly filling it, to promote more efficient
+ * buffer usage.
*/
- while (1) {
- /*
- * If the queue is empty and there is a ready current buffer, OR if
- * the current buffer is full, then move the current buffer to the
- * queue.
- */
-
- if (((statePtr->curOutPtr != NULL) &&
- IsBufferFull(statePtr->curOutPtr))
- || (GotFlag(statePtr, BUFFER_READY) &&
- (statePtr->outQueueHead == NULL))) {
- ResetFlag(statePtr, BUFFER_READY);
- statePtr->curOutPtr->nextPtr = NULL;
- if (statePtr->outQueueHead == NULL) {
- statePtr->outQueueHead = statePtr->curOutPtr;
- } else {
- statePtr->outQueueTail->nextPtr = statePtr->curOutPtr;
- }
- statePtr->outQueueTail = statePtr->curOutPtr;
- statePtr->curOutPtr = NULL;
+ bufPtr = statePtr->curOutPtr;
+ if (bufPtr && BytesLeft(bufPtr) && /* Keep empties off queue */
+ (statePtr->outQueueHead == NULL || IsBufferFull(bufPtr))) {
+ if (statePtr->outQueueHead == NULL) {
+ statePtr->outQueueHead = bufPtr;
+ } else {
+ statePtr->outQueueTail->nextPtr = bufPtr;
}
- bufPtr = statePtr->outQueueHead;
+ statePtr->outQueueTail = bufPtr;
+ statePtr->curOutPtr = NULL;
+ }
- /*
- * If we are not being called from an async flush and an async flush
- * is active, we just return without producing any output.
- */
+ assert(!IsBufferFull(statePtr->curOutPtr));
- if (!calledFromAsyncFlush && GotFlag(statePtr, BG_FLUSH_SCHEDULED)) {
- return 0;
- }
+ /*
+ * If we are not being called from an async flush and an async flush
+ * is active, we just return without producing any output.
+ */
- /*
- * If the output queue is still empty, break out of the while loop.
- */
+ if (!calledFromAsyncFlush && GotFlag(statePtr, BG_FLUSH_SCHEDULED)) {
+ return 0;
+ }
- if (bufPtr == NULL) {
- break; /* Out of the "while (1)". */
- }
+ /*
+ * Loop over the queued buffers and attempt to flush as much as possible
+ * of the queued output to the channel.
+ */
+
+ while (statePtr->outQueueHead) {
+ bufPtr = statePtr->outQueueHead;
/*
* Produce the output on the channel.
*/
PreserveChannelBuffer(bufPtr);
- toWrite = BytesLeft(bufPtr);
- if (toWrite == 0) {
- written = 0;
- } else {
- written = (chanPtr->typePtr->outputProc)(chanPtr->instanceData,
- RemovePoint(bufPtr), toWrite, &errorCode);
- }
+ written = (chanPtr->typePtr->outputProc)(chanPtr->instanceData,
+ RemovePoint(bufPtr), BytesLeft(bufPtr), &errorCode);
/*
* If the write failed completely attempt to start the asynchronous
@@ -2672,8 +2656,10 @@ FlushChannel(
DiscardOutputQueued(statePtr);
ReleaseChannelBuffer(bufPtr);
- continue;
+ break;
} else {
+ /* TODO: Consider detecting and reacting to short writes
+ * on blocking channels. Ought not happen. See iocmd-24.2. */
wroteSome = 1;
}
@@ -2691,7 +2677,7 @@ FlushChannel(
RecycleBuffer(statePtr, bufPtr, 0);
}
ReleaseChannelBuffer(bufPtr);
- } /* Closes "while (1)". */
+ } /* Closes "while". */
/*
* If we wrote some data while flushing in the background, we are done.
@@ -2707,6 +2693,12 @@ FlushChannel(
ResetFlag(statePtr, BG_FLUSH_SCHEDULED);
(chanPtr->typePtr->watchProc)(chanPtr->instanceData,
statePtr->interestMask);
+ } else {
+ /* TODO: If code reaches this point, it means a writable
+ * event is being handled on the channel, but the channel
+ * could not in fact be written to. This ought not happen,
+ * but Unix pipes appear to act this way (see io-53.4).
+ * Also can imagine broken reflected channels. */
}
}
@@ -3252,14 +3244,6 @@ Tcl_Close(
ResetFlag(statePtr, CHANNEL_INCLOSE);
/*
- * Ensure that the last output buffer will be flushed.
- */
-
- if ((statePtr->curOutPtr != NULL) && IsBufferReady(statePtr->curOutPtr)) {
- SetFlag(statePtr, BUFFER_READY);
- }
-
- /*
* If this channel supports it, close the read side, since we don't need
* it anymore and this will help avoid deadlocks on some channel types.
*/
@@ -3669,10 +3653,17 @@ static int WillRead(Channel *chanPtr)
}
if ((chanPtr->typePtr->seekProc != NULL)
&& (Tcl_OutputBuffered((Tcl_Channel) chanPtr) > 0)) {
- if ((chanPtr->state->curOutPtr != NULL)
- && IsBufferReady(chanPtr->state->curOutPtr)) {
- SetFlag(chanPtr->state, BUFFER_READY);
- }
+
+ /*
+ * CAVEAT - The assumption here is that FlushChannel() will
+ * push out the bytes of any writes that are in progress.
+ * Since this is a seekable channel, we assume it is not one
+ * that can block and force bg flushing. Channels we know that
+ * can do that -- sockets, pipes -- are not seekable. If the
+ * assumption is wrong, more drastic measures may be required here
+ * like temporarily setting the channel into blocking mode.
+ */
+
if (FlushChannel(NULL, chanPtr, 0) != 0) {
return -1;
}
@@ -3854,7 +3845,6 @@ Write(
}
if ((flushed < total) && (GotFlag(statePtr, CHANNEL_UNBUFFERED) ||
(needNlFlush && GotFlag(statePtr, CHANNEL_LINEBUFFERED)))) {
- SetFlag(statePtr, BUFFER_READY);
if (FlushChannel(NULL, chanPtr, 0) != 0) {
return -1;
}
@@ -5973,14 +5963,6 @@ Tcl_Flush(
return -1;
}
- /*
- * Force current output buffer to be output also.
- */
-
- if ((statePtr->curOutPtr != NULL) && IsBufferReady(statePtr->curOutPtr)) {
- SetFlag(statePtr, BUFFER_READY);
- }
-
result = FlushChannel(NULL, chanPtr, 0);
if (result != 0) {
return TCL_ERROR;
@@ -6120,9 +6102,8 @@ GetInput(
*/
bufPtr = statePtr->inQueueTail;
- if ((bufPtr != NULL) && !IsBufferFull(bufPtr)) {
- toRead = SpaceLeft(bufPtr);
- } else {
+
+ if ((bufPtr == NULL) || IsBufferFull(bufPtr)) {
bufPtr = statePtr->saveInBufPtr;
statePtr->saveInBufPtr = NULL;
@@ -6152,6 +6133,8 @@ GetInput(
statePtr->inQueueTail->nextPtr = bufPtr;
}
statePtr->inQueueTail = bufPtr;
+ } else {
+ toRead = SpaceLeft(bufPtr);
}
PreserveChannelBuffer(bufPtr);
@@ -6293,15 +6276,6 @@ Tcl_Seek(
}
/*
- * If there is data buffered in statePtr->curOutPtr then mark the channel
- * as ready to flush before invoking FlushChannel.
- */
-
- if ((statePtr->curOutPtr != NULL) && IsBufferReady(statePtr->curOutPtr)) {
- SetFlag(statePtr, BUFFER_READY);
- }
-
- /*
* If the flush fails we cannot recover the original position. In that
* case the seek is not attempted because we do not know where the access
* position is - instead we return the error. FlushChannel has already
@@ -8825,7 +8799,7 @@ DoRead(
/* If there is no full buffer, attempt to create and/or fill one. */
- while (bufPtr == NULL || !IsBufferFull(bufPtr)) {
+ while (!IsBufferFull(bufPtr)) {
int code;
moreData:
@@ -10380,7 +10354,6 @@ DumpFlags(
ChanFlag('n', CHANNEL_NONBLOCKING);
ChanFlag('l', CHANNEL_LINEBUFFERED);
ChanFlag('u', CHANNEL_UNBUFFERED);
- ChanFlag('R', BUFFER_READY);
ChanFlag('F', BG_FLUSH_SCHEDULED);
ChanFlag('c', CHANNEL_CLOSED);
ChanFlag('E', CHANNEL_EOF);
diff --git a/generic/tclIO.h b/generic/tclIO.h
index b8fb5be..59182ec 100644
--- a/generic/tclIO.h
+++ b/generic/tclIO.h
@@ -227,11 +227,6 @@ typedef struct ChannelState {
* flushed after every newline. */
#define CHANNEL_UNBUFFERED (1<<5) /* Output to the channel must always
* be flushed immediately. */
-#define BUFFER_READY (1<<6) /* Current output buffer (the
- * curOutPtr field in the channel
- * structure) should be output as soon
- * as possible even though it may not
- * be full. */
#define BG_FLUSH_SCHEDULED (1<<7) /* A background flush of the queued
* output buffers has been
* scheduled. */