diff options
Diffstat (limited to 'library/http')
| -rw-r--r-- | library/http/http.tcl | 861 | ||||
| -rw-r--r-- | library/http/pkgIndex.tcl | 10 |
2 files changed, 640 insertions, 231 deletions
diff --git a/library/http/http.tcl b/library/http/http.tcl index 046cdeb..e7224a2 100644 --- a/library/http/http.tcl +++ b/library/http/http.tcl @@ -1,45 +1,38 @@ # http.tcl -- # # Client-side HTTP for GET, POST, and HEAD commands. These routines can -# be used in untrusted code that uses the Safesock security policy. These -# procedures use a callback interface to avoid using vwait, which is not -# defined in the safe base. +# be used in untrusted code that uses the Safesock security policy. +# These procedures use a callback interface to avoid using vwait, which +# is not defined in the safe base. # # See the file "license.terms" for information on usage and redistribution of # this file, and for a DISCLAIMER OF ALL WARRANTIES. -# Rough version history: -# 1.0 Old http_get interface. -# 2.0 http:: namespace and http::geturl. -# 2.1 Added callbacks to handle arriving data, and timeouts. -# 2.2 Added ability to fetch into a channel. -# 2.3 Added SSL support, and ability to post from a channel. This version -# also cleans up error cases and eliminates the "ioerror" status in -# favor of raising an error -# 2.4 Added -binary option to http::geturl and charset element to the state -# array. - package require Tcl 8.4 -# Keep this in sync with pkgIndex.tcl and with the install directories -# in Makefiles -package provide http 2.5.5 +# Keep this in sync with pkgIndex.tcl and with the install directories in +# Makefiles +package provide http 2.7.7 namespace eval http { + # Allow resourcing to not clobber existing data + variable http - array set http { - -accept */* - -proxyhost {} - -proxyport {} - -proxyfilter http::ProxyRequired - -urlencoding utf-8 + if {![info exists http]} { + array set http { + -accept */* + -proxyhost {} + -proxyport {} + -proxyfilter http::ProxyRequired + -urlencoding utf-8 + } + set http(-useragent) "Tcl http client package [package provide http]" } - set http(-useragent) "Tcl http client package [package provide http]" proc init {} { # Set up the map for quoting chars. RFC3986 Section 2.3 say percent - # encode all except: "... percent-encoded octets in the ranges of ALPHA - # (%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period (%2E), - # underscore (%5F), or tilde (%7E) should not be created by URI + # encode all except: "... percent-encoded octets in the ranges of + # ALPHA (%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period + # (%2E), underscore (%5F), or tilde (%7E) should not be created by URI # producers ..." for {set i 0} {$i <= 256} {incr i} { set c [format %c $i] @@ -50,33 +43,65 @@ namespace eval http { # These are handled specially set map(\n) %0d%0a variable formMap [array get map] + + # Create a map for HTTP/1.1 open sockets + variable socketmap + if {[info exists socketmap]} { + # Close but don't remove open sockets on re-init + foreach {url sock} [array get socketmap] { + catch {close $sock} + } + } + array set socketmap {} } init variable urlTypes - array set urlTypes { - http {80 ::socket} + if {![info exists urlTypes]} { + set urlTypes(http) [list 80 ::socket] } variable encodings [string tolower [encoding names]] # This can be changed, but iso8859-1 is the RFC standard. - variable defaultCharset "iso8859-1" + variable defaultCharset + if {![info exists defaultCharset]} { + set defaultCharset "iso8859-1" + } + + # Force RFC 3986 strictness in geturl url verification? + variable strict + if {![info exists strict]} { + set strict 1 + } - # Force RFC 3986 strictness in geturl url verification? Not for 8.4.x - variable strict 0 + # Let user control default keepalive for compatibility + variable defaultKeepalive + if {![info exists defaultKeepalive]} { + set defaultKeepalive 0 + } namespace export geturl config reset wait formatQuery register unregister # Useful, but not exported: data size status code } +# http::Log -- +# +# Debugging output -- define this to observe HTTP/1.1 socket usage. +# Should echo any args received. +# +# Arguments: +# msg Message to output +# +proc http::Log {args} {} + # http::register -- # # See documentation for details. # # Arguments: -# proto URL protocol prefix, e.g. https -# port Default port for protocol -# command Command to use to create socket +# proto URL protocol prefix, e.g. https +# port Default port for protocol +# command Command to use to create socket # Results: # list of port and command that was registered. @@ -90,7 +115,7 @@ proc http::register {proto port command} { # Unregisters URL protocol handler # # Arguments: -# proto URL protocol prefix, e.g. https +# proto URL protocol prefix, e.g. https # Results: # list of port and command that was unregistered. @@ -125,21 +150,19 @@ proc http::config {args} { return $result } set options [string map {- ""} $options] - set pat ^-([join $options |])$ + set pat ^-(?:[join $options |])$ if {[llength $args] == 1} { set flag [lindex $args 0] - if {[regexp -- $pat $flag]} { - return $http($flag) - } else { + if {![regexp -- $pat $flag]} { return -code error "Unknown option $flag, must be: $usage" } + return $http($flag) } else { foreach {flag value} $args { - if {[regexp -- $pat $flag]} { - set http($flag) $value - } else { + if {![regexp -- $pat $flag]} { return -code error "Unknown option $flag, must be: $usage" } + set http($flag) $value } } } @@ -152,33 +175,81 @@ proc http::config {args} { # token Connection token. # errormsg (optional) If set, forces status to error. # skipCB (optional) If set, don't call the -command callback. This -# is useful when geturl wants to throw an exception instead -# of calling the callback. That way, the same error isn't -# reported to two places. +# is useful when geturl wants to throw an exception instead +# of calling the callback. That way, the same error isn't +# reported to two places. # # Side Effects: # Closes the socket -proc http::Finish { token {errormsg ""} {skipCB 0}} { +proc http::Finish {token {errormsg ""} {skipCB 0}} { variable $token upvar 0 $token state global errorInfo errorCode - if {[string length $errormsg] != 0} { + if {$errormsg ne ""} { set state(error) [list $errormsg $errorInfo $errorCode] - set state(status) error + set state(status) "error" + } + if { + ($state(status) eq "timeout") || ($state(status) eq "error") || + ([info exists state(connection)] && ($state(connection) eq "close")) + } then { + CloseSocket $state(sock) $token + } + if {[info exists state(after)]} { + after cancel $state(after) } - catch {close $state(sock)} - catch {after cancel $state(after)} if {[info exists state(-command)] && !$skipCB} { if {[catch {eval $state(-command) {$token}} err]} { - if {[string length $errormsg] == 0} { + if {$errormsg eq ""} { set state(error) [list $err $errorInfo $errorCode] set state(status) error } } - if {[info exists state(-command)]} { - # Command callback may already have unset our state - unset state(-command) + # Command callback may already have unset our state + unset -nocomplain state(-command) + } +} + +# http::CloseSocket - +# +# Close a socket and remove it from the persistent sockets table. If +# possible an http token is included here but when we are called from a +# fileevent on remote closure we need to find the correct entry - hence +# the second section. + +proc ::http::CloseSocket {s {token {}}} { + variable socketmap + catch {fileevent $s readable {}} + set conn_id {} + if {$token ne ""} { + variable $token + upvar 0 $token state + if {[info exists state(socketinfo)]} { + set conn_id $state(socketinfo) + } + } else { + set map [array get socketmap] + set ndx [lsearch -exact $map $s] + if {$ndx != -1} { + incr ndx -1 + set conn_id [lindex $map $ndx] + } + } + if {$conn_id eq {} || ![info exists socketmap($conn_id)]} { + Log "Closing socket $s (no connection info)" + if {[catch {close $s} err]} { + Log "Error: $err" + } + } else { + if {[info exists socketmap($conn_id)]} { + Log "Closing connection $conn_id (sock $socketmap($conn_id))" + if {[catch {close $socketmap($conn_id)} err]} { + Log "Error: $err" + } + unset socketmap($conn_id) + } else { + Log "Cannot close connection $conn_id - no socket in socket map" } } } @@ -194,7 +265,7 @@ proc http::Finish { token {errormsg ""} {skipCB 0}} { # Side Effects: # See Finish -proc http::reset { token {why reset} } { +proc http::reset {token {why reset}} { variable $token upvar 0 $token state set state(status) $why @@ -217,13 +288,14 @@ proc http::reset { token {why reset} } { # args Option value pairs. Valid options include: # -blocksize, -validate, -headers, -timeout # Results: -# Returns a token for this connection. This token is the name of an array -# that the caller should unset to garbage collect the state. +# Returns a token for this connection. This token is the name of an +# array that the caller should unset to garbage collect the state. -proc http::geturl { url args } { +proc http::geturl {url args} { variable http variable urlTypes variable defaultCharset + variable defaultKeepalive variable strict # Initialize the state variable, an array. We'll return the name of this @@ -241,47 +313,58 @@ proc http::geturl { url args } { array set state { -binary false - -blocksize 8192 + -blocksize 8192 -queryblocksize 8192 - -validate 0 - -headers {} - -timeout 0 - -type application/x-www-form-urlencoded + -validate 0 + -headers {} + -timeout 0 + -type application/x-www-form-urlencoded -queryprogress {} - state header + -protocol 1.1 + binary 0 + state connecting meta {} coding {} currentsize 0 totalsize 0 querylength 0 queryoffset 0 - type text/html - body {} + type text/html + body {} status "" - http "" + http "" + connection close } + set state(-keepalive) $defaultKeepalive + set state(-strict) $strict # These flags have their types verified [Bug 811170] array set type { -binary boolean -blocksize integer -queryblocksize integer - -validate boolean + -strict boolean -timeout integer + -validate boolean } set state(charset) $defaultCharset - set options {-binary -blocksize -channel -command -handler -headers \ - -progress -query -queryblocksize -querychannel -queryprogress\ - -validate -timeout -type} - set usage [join $options ", "] + set options { + -binary -blocksize -channel -command -handler -headers -keepalive + -method -myaddr -progress -protocol -query -queryblocksize + -querychannel -queryprogress -strict -timeout -type -validate + } + set usage [join [lsort $options] ", "] set options [string map {- ""} $options] - set pat ^-([join $options |])$ + set pat ^-(?:[join $options |])$ foreach {flag value} $args { - if {[regexp $pat $flag]} { + if {[regexp -- $pat $flag]} { # Validate numbers - if {[info exists type($flag)] && \ - ![string is $type($flag) -strict $value]} { + if { + [info exists type($flag)] && + ![string is $type($flag) -strict $value] + } then { unset $token - return -code error "Bad value for $flag ($value), must be $type($flag)" + return -code error \ + "Bad value for $flag ($value), must be $type($flag)" } set state($flag) $value } else { @@ -320,7 +403,9 @@ proc http::geturl { url args } { # pass it in here, but it's cheap to strip). # # An example of a URL that has all the parts: - # http://jschmoe:xyzzy@www.bogus.net:8000/foo/bar.tml?q=foo#changes + # + # http://jschmoe:xyzzy@www.bogus.net:8000/foo/bar.tml?q=foo#changes + # # The "http" is the protocol, the user is "jschmoe", the password is # "xyzzy", the host is "www.bogus.net", the port is "8000", the path is # "/foo/bar.tml", the query is "q=foo", and the fragment is "changes". @@ -331,8 +416,8 @@ proc http::geturl { url args } { # Also note that we do not currently support IPv6 addresses. # # From a validation perspective, we need to ensure that the parts of the - # URL that are going to the server are correctly encoded. - # This is only done if $::http::strict is true (default 0 for compat). + # URL that are going to the server are correctly encoded. This is only + # done if $state(-strict) is true (inherited from $::http::strict). set URLmatcher {(?x) # this is _expanded_ syntax ^ @@ -346,7 +431,7 @@ proc http::geturl { url args } { ( [^/:\#?]+ ) # <host part of authority> (?: : (\d+) )? # <port part of authority> )? - ( / [^\#?]* (?: \? [^\#?]* )?)? # <path> (including query) + ( / [^\#]*)? # <path> (including query) (?: \# (.*) )? # <fragment> $ } @@ -365,7 +450,7 @@ proc http::geturl { url args } { # Note that we don't check the hostname for validity here; if it's # invalid, we'll simply fail to resolve it later on. } - if {$port ne "" && $port>65535} { + if {$port ne "" && $port > 65535} { unset $token return -code error "Invalid port number: $port" } @@ -378,7 +463,7 @@ proc http::geturl { url args } { (?: [-\w.~!$&'()*+,;=:] | %[0-9a-f][0-9a-f] )+ $ } - if {$strict && ![regexp -- $validityRE $user]} { + if {$state(-strict) && ![regexp -- $validityRE $user]} { unset $token # Provide a better error message in this error case if {[regexp {(?i)%(?![0-9a-f][0-9a-f]).?.?} $user bad]} { @@ -398,19 +483,19 @@ proc http::geturl { url args } { (?: \? (?: [-\w.~!$&'()*+,;=:@/?] | %[0-9a-f][0-9a-f] )* )? $ } - if {$strict && ![regexp -- $validityRE $srvurl]} { + if {$state(-strict) && ![regexp -- $validityRE $srvurl]} { unset $token # Provide a better error message in this error case if {[regexp {(?i)%(?![0-9a-f][0-9a-f])..} $srvurl bad]} { return -code error \ - "Illegal encoding character usage \"$bad\" in URL path" + "Illegal encoding character usage \"$bad\" in URL path" } return -code error "Illegal characters in URL path" } } else { set srvurl / } - if {[string length $proto] == 0} { + if {$proto eq ""} { set proto http } if {![info exists urlTypes($proto)]} { @@ -420,7 +505,7 @@ proc http::geturl { url args } { set defport [lindex $urlTypes($proto) 0] set defcmd [lindex $urlTypes($proto) 1] - if {[string length $port] == 0} { + if {$port eq ""} { set port $defport } if {![catch {$http(-proxyfilter) $host} proxy]} { @@ -445,71 +530,100 @@ proc http::geturl { url args } { # If a timeout is specified we set up the after event and arrange for an # asynchronous socket connection. + set sockopts [list] if {$state(-timeout) > 0} { set state(after) [after $state(-timeout) \ [list http::reset $token timeout]] - set async -async - } else { - set async "" + lappend sockopts -async } # If we are using the proxy, we must pass in the full URL that includes # the server name. - if {[info exists phost] && [string length $phost]} { + if {[info exists phost] && ($phost ne "")} { set srvurl $url - set conStat [catch {eval $defcmd $async {$phost $pport}} s] + set targetAddr [list $phost $pport] } else { - set conStat [catch {eval $defcmd $async {$host $port}} s] + set targetAddr [list $host $port] } - - if {$conStat} { - # Something went wrong while trying to establish the connection. Clean - # up after events and such, but DON'T call the command callback (if - # available) because we're going to throw an exception from here - # instead. - Finish $token "" 1 - cleanup $token - return -code error $s + # Proxy connections aren't shared among different hosts. + set state(socketinfo) $host:$port + + # See if we are supposed to use a previously opened channel. + if {$state(-keepalive)} { + variable socketmap + if {[info exists socketmap($state(socketinfo))]} { + if {[catch {fconfigure $socketmap($state(socketinfo))}]} { + Log "WARNING: socket for $state(socketinfo) was closed" + unset socketmap($state(socketinfo)) + } else { + set sock $socketmap($state(socketinfo)) + Log "reusing socket $sock for $state(socketinfo)" + catch {fileevent $sock writable {}} + catch {fileevent $sock readable {}} + } + } + # don't automatically close this connection socket + set state(connection) {} + } + if {![info exists sock]} { + # Pass -myaddr directly to the socket command + if {[info exists state(-myaddr)]} { + lappend sockopts -myaddr $state(-myaddr) + } + if {[catch {eval $defcmd $sockopts $targetAddr} sock]} { + # something went wrong while trying to establish the connection. + # Clean up after events and such, but DON'T call the command + # callback (if available) because we're going to throw an + # exception from here instead. + + set state(sock) $sock + Finish $token "" 1 + cleanup $token + return -code error $sock + } + } + set state(sock) $sock + Log "Using $sock for $state(socketinfo)" \ + [expr {$state(-keepalive)?"keepalive":""}] + if {$state(-keepalive)} { + set socketmap($state(socketinfo)) $sock } - set state(sock) $s # Wait for the connection to complete. if {$state(-timeout) > 0} { - fileevent $s writable [list http::Connect $token] + fileevent $sock writable [list http::Connect $token] http::wait $token if {![info exists state]} { # If we timed out then Finish has been called and the users - # command callback may have cleaned up the token. If so - # we end up here with nothing left to do. + # command callback may have cleaned up the token. If so we end up + # here with nothing left to do. + return $token + } elseif {$state(status) eq "error"} { + # Something went wrong while trying to establish the connection. + # Clean up after events and such, but DON'T call the command + # callback (if available) because we're going to throw an + # exception from here instead. + set err [lindex $state(error) 0] + cleanup $token + return -code error $err + } elseif {$state(status) ne "connect"} { + # Likely to be connection timeout return $token - } else { - if {$state(status) eq "error"} { - # Something went wrong while trying to establish the connection. - # Clean up after events and such, but DON'T call the command - # callback (if available) because we're going to throw an - # exception from here instead. - set err [lindex $state(error) 0] - cleanup $token - return -code error $err - } elseif {$state(status) ne "connect"} { - # Likely to be connection timeout - return $token - } - set state(status) "" } + set state(status) "" } # Send data in cr-lf format, but accept any line terminators - fconfigure $s -translation {auto crlf} -buffersize $state(-blocksize) + fconfigure $sock -translation {auto crlf} -buffersize $state(-blocksize) # The following is disallowed in safe interpreters, but the socket is # already in non-blocking mode in that case. - catch {fconfigure $s -blocking off} + catch {fconfigure $sock -blocking off} set how GET if {$isQuery} { set state(querylength) [string length $state(-query)] @@ -530,29 +644,66 @@ proc http::geturl { url args } { fconfigure $state(-querychannel) -blocking 1 -translation binary set contDone 0 } + if {[info exists state(-method)] && $state(-method) ne ""} { + set how $state(-method) + } if {[catch { - puts $s "$how $srvurl HTTP/1.0" - puts $s "Accept: $http(-accept)" - if {$port == $defport} { + puts $sock "$how $srvurl HTTP/$state(-protocol)" + puts $sock "Accept: $http(-accept)" + array set hdrs $state(-headers) + if {[info exists hdrs(Host)]} { + # Allow Host spoofing. [Bug 928154] + puts $sock "Host: $hdrs(Host)" + } elseif {$port == $defport} { # Don't add port in this case, to handle broken servers. [Bug - # 504508] - puts $s "Host: $host" + # #504508] + puts $sock "Host: $host" } else { - puts $s "Host: $host:$port" + puts $sock "Host: $host:$port" } - puts $s "User-Agent: $http(-useragent)" + unset hdrs + puts $sock "User-Agent: $http(-useragent)" + if {$state(-protocol) == 1.0 && $state(-keepalive)} { + puts $sock "Connection: keep-alive" + } + if {$state(-protocol) > 1.0 && !$state(-keepalive)} { + puts $sock "Connection: close" ;# RFC2616 sec 8.1.2.1 + } + if {[info exists phost] && ($phost ne "") && $state(-keepalive)} { + puts $sock "Proxy-Connection: Keep-Alive" + } + set accept_encoding_seen 0 + set content_type_seen 0 foreach {key value} $state(-headers) { + if {[string equal -nocase $key "host"]} { + continue + } + if {[string equal -nocase $key "accept-encoding"]} { + set accept_encoding_seen 1 + } + if {[string equal -nocase $key "content-type"]} { + set content_type_seen 1 + } set value [string map [list \n "" \r ""] $value] set key [string trim $key] - if {$key eq "Content-Length"} { + if {[string equal -nocase $key "content-length"]} { set contDone 1 set state(querylength) $value } if {[string length $key]} { - puts $s "$key: $value" + puts $sock "$key: $value" } } + # Soft zlib dependency check - no package require + if { + !$accept_encoding_seen && + ([package vsatisfies [package provide Tcl] 8.6] + || [llength [package provide zlib]]) && + !([info exists state(-channel)] || [info exists state(-handler)]) + } then { + puts $sock "Accept-Encoding: gzip, identity, *;q=0.1" + } if {$isQueryChannel && $state(querylength) == 0} { # Try to determine size of data in channel. If we cannot seek, the # surrounding catch will trap us @@ -572,29 +723,32 @@ proc http::geturl { url args } { # It is possible to have both the read and write fileevents active at # this point. The only scenario it seems to affect is a server that # closes the connection without reading the POST data. (e.g., early - # versions TclHttpd in various error cases). Depending on the platform, - # the client may or may not be able to get the response from the server - # because of the error it will get trying to write the post data. - # Having both fileevents active changes the timing and the behavior, - # but no two platforms (among Solaris, Linux, and NT) behave the same, - # and none behave all that well in any case. Servers should always read - # their POST data if they expect the client to read their response. + # versions TclHttpd in various error cases). Depending on the + # platform, the client may or may not be able to get the response from + # the server because of the error it will get trying to write the post + # data. Having both fileevents active changes the timing and the + # behavior, but no two platforms (among Solaris, Linux, and NT) behave + # the same, and none behave all that well in any case. Servers should + # always read their POST data if they expect the client to read their + # response. if {$isQuery || $isQueryChannel} { - puts $s "Content-Type: $state(-type)" + if {!$content_type_seen} { + puts $sock "Content-Type: $state(-type)" + } if {!$contDone} { - puts $s "Content-Length: $state(querylength)" + puts $sock "Content-Length: $state(querylength)" } - puts $s "" - fconfigure $s -translation {auto binary} - fileevent $s writable [list http::Write $token] + puts $sock "" + fconfigure $sock -translation {auto binary} + fileevent $sock writable [list http::Write $token] } else { - puts $s "" - flush $s - fileevent $s readable [list http::Event $token] + puts $sock "" + flush $sock + fileevent $sock readable [list http::Event $sock $token] } - if {! [info exists state(-command)]} { + if {![info exists state(-command)]} { # geturl does EVERYTHING asynchronously, so if the user calls it # synchronously, we just do a wait here. @@ -605,7 +759,7 @@ proc http::geturl { url args } { return -code error [lindex $state(error) 0] } } - } err]} { + } err]} then { # The socket probably was never connected, or the connection dropped # later. @@ -637,7 +791,9 @@ proc http::data {token} { return $state(body) } proc http::status {token} { - if {![info exists $token]} { return "error" } + if {![info exists $token]} { + return "error" + } variable $token upvar 0 $token state return $state(status) @@ -708,8 +864,10 @@ proc http::Connect {token} { variable $token upvar 0 $token state set err "due to unexpected EOF" - if {[eof $state(sock)] || - [string length [set err [fconfigure $state(sock) -error]]]} { + if { + [eof $state(sock)] || + [set err [fconfigure $state(sock) -error]] ne "" + } then { Finish $token "connect failed $err" 1 } else { set state(status) connect @@ -731,7 +889,7 @@ proc http::Connect {token} { proc http::Write {token} { variable $token upvar 0 $token state - set s $state(sock) + set sock $state(sock) # Output a block. Tcl will buffer this if the socket blocks set done 0 @@ -742,9 +900,9 @@ proc http::Write {token} { # Chop up large query strings so queryprogress callback can give # smooth feedback. - puts -nonewline $s \ - [string range $state(-query) $state(queryoffset) \ - [expr {$state(queryoffset) + $state(-queryblocksize) - 1}]] + puts -nonewline $sock \ + [string range $state(-query) $state(queryoffset) \ + [expr {$state(queryoffset) + $state(-queryblocksize) - 1}]] incr state(queryoffset) $state(-queryblocksize) if {$state(queryoffset) >= $state(querylength)} { set state(queryoffset) $state(querylength) @@ -754,13 +912,13 @@ proc http::Write {token} { # Copy blocks from the query channel set outStr [read $state(-querychannel) $state(-queryblocksize)] - puts -nonewline $s $outStr + puts -nonewline $sock $outStr incr state(queryoffset) [string length $outStr] if {[eof $state(-querychannel)]} { set done 1 } } - } err]} { + } err]} then { # Do not call Finish here, but instead let the read half of the socket # process whatever server reply there is to get. @@ -768,16 +926,16 @@ proc http::Write {token} { set done 1 } if {$done} { - catch {flush $s} - fileevent $s writable {} - fileevent $s readable [list http::Event $token] + catch {flush $sock} + fileevent $sock writable {} + fileevent $sock readable [list http::Event $sock $token] } # Callback to the client after we've completely handled everything. if {[string length $state(-queryprogress)]} { - eval $state(-queryprogress) [list $token $state(querylength)\ - $state(queryoffset)] + eval $state(-queryprogress) \ + [list $token $state(querylength) $state(queryoffset)] } } @@ -786,114 +944,248 @@ proc http::Write {token} { # Handle input on the socket # # Arguments +# sock The socket receiving input. # token The token returned from http::geturl # # Side Effects # Read the socket and handle callbacks. -proc http::Event {token} { +proc http::Event {sock token} { variable $token upvar 0 $token state - set s $state(sock) - if {$state(state) eq "header"} { - if {[catch {gets $s line} n]} { + if {![info exists state]} { + Log "Event $sock with invalid token '$token' - remote close?" + if {![eof $sock]} { + if {[set d [read $sock]] ne ""} { + Log "WARNING: additional data left on closed socket" + } + } + CloseSocket $sock + return + } + if {$state(state) eq "connecting"} { + if {[catch {gets $sock state(http)} n]} { + return [Finish $token $n] + } elseif {$n >= 0} { + set state(state) "header" + } + } elseif {$state(state) eq "header"} { + if {[catch {gets $sock line} n]} { return [Finish $token $n] } elseif {$n == 0} { - variable encodings + # We have now read all headers + # We ignore HTTP/1.1 100 Continue returns. RFC2616 sec 8.2.3 + if {$state(http) == "" || [lindex $state(http) 1] == 100} { + return + } + set state(state) body - if {$state(-binary) || ![string match -nocase text* $state(type)] - || [string match *gzip* $state(coding)] - || [string match *compress* $state(coding)]} { + + # If doing a HEAD, then we won't get any body + if {$state(-validate)} { + Eof $token + return + } + + # For non-chunked transfer we may have no body - in this case we + # may get no further file event if the connection doesn't close + # and no more data is sent. We can tell and must finish up now - + # not later. + if { + !(([info exists state(connection)] + && ($state(connection) eq "close")) + || [info exists state(transfer)]) + && ($state(totalsize) == 0) + } then { + Log "body size is 0 and no events likely - complete." + Eof $token + return + } + + # We have to use binary translation to count bytes properly. + fconfigure $sock -translation binary + + if { + $state(-binary) || ![string match -nocase text* $state(type)] + } then { # Turn off conversions for non-text data - fconfigure $s -translation binary + set state(binary) 1 + } + if { + $state(binary) || [string match *gzip* $state(coding)] || + [string match *compress* $state(coding)] + } then { if {[info exists state(-channel)]} { fconfigure $state(-channel) -translation binary } - } else { - # If we are getting text, set the incoming channel's encoding - # correctly. iso8859-1 is the RFC default, but this could be - # any IANA charset. However, we only know how to convert what - # we have encodings for. - set idx [lsearch -exact $encodings \ - [string tolower $state(charset)]] - if {$idx >= 0} { - fconfigure $s -encoding [lindex $encodings $idx] - } } - if {[info exists state(-channel)] && \ - ![info exists state(-handler)]} { + if { + [info exists state(-channel)] && + ![info exists state(-handler)] + } then { # Initiate a sequence of background fcopies - fileevent $s readable {} - CopyStart $s $token + fileevent $sock readable {} + CopyStart $sock $token return } } elseif {$n > 0} { - if {[regexp -nocase {^content-type:(.+)$} $line x type]} { - set state(type) [string trim $type] - # grab the optional charset information - regexp -nocase {charset\s*=\s*(\S+)} $type x state(charset) - } - if {[regexp -nocase {^content-length:(.+)$} $line x length]} { - set state(totalsize) [string trim $length] - } - if {[regexp -nocase {^content-encoding:(.+)$} $line x coding]} { - set state(coding) [string trim $coding] - } + # Process header lines if {[regexp -nocase {^([^:]+):(.+)$} $line x key value]} { + switch -- [string tolower $key] { + content-type { + set state(type) [string trim [string tolower $value]] + # grab the optional charset information + if {[regexp -nocase \ + {charset\s*=\s*\"((?:[^""]|\\\")*)\"} \ + $state(type) -> cs]} { + set state(charset) [string map {{\"} \"} $cs] + } else { + regexp -nocase {charset\s*=\s*(\S+?);?} \ + $state(type) -> state(charset) + } + } + content-length { + set state(totalsize) [string trim $value] + } + content-encoding { + set state(coding) [string trim $value] + } + transfer-encoding { + set state(transfer) \ + [string trim [string tolower $value]] + } + proxy-connection - + connection { + set state(connection) \ + [string trim [string tolower $value]] + } + } lappend state(meta) $key [string trim $value] - } elseif {[string match HTTP* $line]} { - set state(http) $line } } } else { + # Now reading body if {[catch { if {[info exists state(-handler)]} { - set n [eval $state(-handler) {$s $token}] + set n [eval $state(-handler) [list $sock $token]] + } elseif {[info exists state(transfer_final)]} { + set line [getTextLine $sock] + set n [string length $line] + if {$n > 0} { + Log "found $n bytes following final chunk" + append state(transfer_final) $line + } else { + Log "final chunk part" + Eof $token + } + } elseif { + [info exists state(transfer)] + && $state(transfer) eq "chunked" + } then { + set size 0 + set chunk [getTextLine $sock] + set n [string length $chunk] + if {[string trim $chunk] ne ""} { + scan $chunk %x size + if {$size != 0} { + set bl [fconfigure $sock -blocking] + fconfigure $sock -blocking 1 + set chunk [read $sock $size] + fconfigure $sock -blocking $bl + set n [string length $chunk] + if {$n >= 0} { + append state(body) $chunk + } + if {$size != [string length $chunk]} { + Log "WARNING: mis-sized chunk:\ + was [string length $chunk], should be $size" + } + getTextLine $sock + } else { + set state(transfer_final) {} + } + } } else { - set block [read $s $state(-blocksize)] + #Log "read non-chunk $state(currentsize) of $state(totalsize)" + set block [read $sock $state(-blocksize)] set n [string length $block] if {$n >= 0} { append state(body) $block } } - if {$n >= 0} { - incr state(currentsize) $n + if {[info exists state]} { + if {$n >= 0} { + incr state(currentsize) $n + } + # If Content-Length - check for end of data. + if { + ($state(totalsize) > 0) + && ($state(currentsize) >= $state(totalsize)) + } then { + Eof $token + } } - } err]} { + } err]} then { return [Finish $token $err] } else { if {[info exists state(-progress)]} { eval $state(-progress) \ - {$token $state(totalsize) $state(currentsize)} + [list $token $state(totalsize) $state(currentsize)] } } } - if {[eof $s]} { - Eof $token + # catch as an Eof above may have closed the socket already + if {![catch {eof $sock} eof] && $eof} { + if {[info exists $token]} { + set state(connection) close + Eof $token + } else { + # open connection closed on a token that has been cleaned up. + CloseSocket $sock + } return } } +# http::getTextLine -- +# +# Get one line with the stream in blocking crlf mode +# +# Arguments +# sock The socket receiving input. +# +# Results: +# The line of text, without trailing newline + +proc http::getTextLine {sock} { + set tr [fconfigure $sock -translation] + set bl [fconfigure $sock -blocking] + fconfigure $sock -translation crlf -blocking 1 + set r [gets $sock] + fconfigure $sock -translation $tr -blocking $bl + return $r +} + # http::CopyStart # # Error handling wrapper around fcopy # # Arguments -# s The socket to copy from +# sock The socket to copy from # token The token returned from http::geturl # # Side Effects # This closes the connection upon error -proc http::CopyStart {s token} { +proc http::CopyStart {sock token} { variable $token upvar 0 $token state if {[catch { - fcopy $s $state(-channel) -size $state(-blocksize) -command \ + fcopy $sock $state(-channel) -size $state(-blocksize) -command \ [list http::CopyDone $token] - } err]} { + } err]} then { Finish $token $err } } @@ -912,18 +1204,19 @@ proc http::CopyStart {s token} { proc http::CopyDone {token count {error {}}} { variable $token upvar 0 $token state - set s $state(sock) + set sock $state(sock) incr state(currentsize) $count if {[info exists state(-progress)]} { - eval $state(-progress) {$token $state(totalsize) $state(currentsize)} + eval $state(-progress) \ + [list $token $state(totalsize) $state(currentsize)] } # At this point the token may have been reset if {[string length $error]} { Finish $token $error - } elseif {[catch {eof $s} iseof] || $iseof} { + } elseif {[catch {eof $sock} iseof] || $iseof} { Eof $token } else { - CopyStart $s $token + CopyStart $sock $token } } @@ -937,7 +1230,7 @@ proc http::CopyDone {token count {error {}}} { # Side Effects # Clean up the socket -proc http::Eof {token} { +proc http::Eof {token {force 0}} { variable $token upvar 0 $token state if {$state(state) eq "header"} { @@ -946,7 +1239,35 @@ proc http::Eof {token} { } else { set state(status) ok } - set state(state) eof + + if {($state(coding) eq "gzip") && [string length $state(body)] > 0} { + if {[catch { + if {[package vsatisfies [package present Tcl] 8.6]} { + # The zlib integration into 8.6 includes proper gzip support + set state(body) [zlib gunzip $state(body)] + } else { + set state(body) [Gunzip $state(body)] + } + } err]} then { + return [Finish $token $err] + } + } + + if {!$state(binary)} { + # If we are getting text, set the incoming channel's encoding + # correctly. iso8859-1 is the RFC default, but this could be any IANA + # charset. However, we only know how to convert what we have + # encodings for. + + set enc [CharsetToEncoding $state(charset)] + if {$enc ne "binary"} { + set state(body) [encoding convertfrom $enc $state(body)] + } + + # Translate text line endings. + set state(body) [string map {\r\n \n \r \n} $state(body)] + } + Finish $token } @@ -964,9 +1285,9 @@ proc http::wait {token} { variable $token upvar 0 $token state - if {![info exists state(status)] || [string length $state(status)] == 0} { + if {![info exists state(status)] || $state(status) eq ""} { # We must wait on the original variable name, not the upvar alias - vwait $token\(status) + vwait ${token}(status) } return [status $token] @@ -974,7 +1295,7 @@ proc http::wait {token} { # http::formatQuery -- # -# See documentation for details. Call http::formatQuery with an even +# See documentation for details. Call http::formatQuery with an even # number of arguments, where the first is a name, the second is a value, # the third is another name, and so on. # @@ -1042,14 +1363,110 @@ proc http::mapReply {string} { proc http::ProxyRequired {host} { variable http if {[info exists http(-proxyhost)] && [string length $http(-proxyhost)]} { - if {![info exists http(-proxyport)] || \ - ![string length $http(-proxyport)]} { + if { + ![info exists http(-proxyport)] || + ![string length $http(-proxyport)] + } then { set http(-proxyport) 8080 } return [list $http(-proxyhost) $http(-proxyport)] } } +# http::CharsetToEncoding -- +# +# Tries to map a given IANA charset to a tcl encoding. If no encoding +# can be found, returns binary. +# + +proc http::CharsetToEncoding {charset} { + variable encodings + + set charset [string tolower $charset] + if {[regexp {iso-?8859-([0-9]+)} $charset -> num]} { + set encoding "iso8859-$num" + } elseif {[regexp {iso-?2022-(jp|kr)} $charset -> ext]} { + set encoding "iso2022-$ext" + } elseif {[regexp {shift[-_]?js} $charset]} { + set encoding "shiftjis" + } elseif {[regexp {(?:windows|cp)-?([0-9]+)} $charset -> num]} { + set encoding "cp$num" + } elseif {$charset eq "us-ascii"} { + set encoding "ascii" + } elseif {[regexp {(?:iso-?)?lat(?:in)?-?([0-9]+)} $charset -> num]} { + switch -- $num { + 5 {set encoding "iso8859-9"} + 1 - 2 - 3 { + set encoding "iso8859-$num" + } + } + } else { + # other charset, like euc-xx, utf-8,... may directly map to encoding + set encoding $charset + } + set idx [lsearch -exact $encodings $encoding] + if {$idx >= 0} { + return $encoding + } else { + return "binary" + } +} + +# http::Gunzip -- +# +# Decompress data transmitted using the gzip transfer coding. +# + +# FIX ME: redo using zlib sinflate +proc http::Gunzip {data} { + binary scan $data Scb5icc magic method flags time xfl os + set pos 10 + if {$magic != 0x1f8b} { + return -code error "invalid data: supplied data is not in gzip format" + } + if {$method != 8} { + return -code error "invalid compression method" + } + + # lassign [split $flags ""] f_text f_crc f_extra f_name f_comment + foreach {f_text f_crc f_extra f_name f_comment} [split $flags ""] break + set extra "" + if {$f_extra} { + binary scan $data @${pos}S xlen + incr pos 2 + set extra [string range $data $pos $xlen] + set pos [incr xlen] + } + + set name "" + if {$f_name} { + set ndx [string first \0 $data $pos] + set name [string range $data $pos $ndx] + set pos [incr ndx] + } + + set comment "" + if {$f_comment} { + set ndx [string first \0 $data $pos] + set comment [string range $data $pos $ndx] + set pos [incr ndx] + } + + set fcrc "" + if {$f_crc} { + set fcrc [string range $data $pos [incr pos]] + incr pos + } + + binary scan [string range $data end-7 end] ii crc size + set inflated [zlib inflate [string range $data $pos end-8]] + set chk [zlib crc32 $inflated] + if {($crc & 0xffffffff) != ($chk & 0xffffffff)} { + return -code error "invalid data: checksum mismatch $crc != $chk" + } + return $inflated +} + # Local variables: # indent-tabs-mode: t # End: diff --git a/library/http/pkgIndex.tcl b/library/http/pkgIndex.tcl index cf6a1ff..168d628 100644 --- a/library/http/pkgIndex.tcl +++ b/library/http/pkgIndex.tcl @@ -1,12 +1,4 @@ # Tcl package index file, version 1.1 -# This file is generated by the "pkg_mkIndex" command -# and sourced either when an application starts up or -# by a "package unknown" script. It invokes the -# "package ifneeded" command to set up package-related -# information so that packages will be loaded automatically -# in response to "package require" commands. When this -# script is sourced, the variable $dir must contain the -# full path name of this file's directory. if {![package vsatisfies [package provide Tcl] 8.4]} {return} -package ifneeded http 2.5.5 [list tclPkgSetup $dir http 2.5.5 {{http.tcl source {::http::config ::http::formatQuery ::http::geturl ::http::reset ::http::wait ::http::register ::http::unregister ::http::mapReply}}}] +package ifneeded http 2.7.7 [list tclPkgSetup $dir http 2.7.7 {{http.tcl source {::http::config ::http::formatQuery ::http::geturl ::http::reset ::http::wait ::http::register ::http::unregister ::http::mapReply}}}] |