diff options
Diffstat (limited to 'library/tcltest/tcltest.tcl')
| -rw-r--r-- | library/tcltest/tcltest.tcl | 1532 |
1 files changed, 713 insertions, 819 deletions
diff --git a/library/tcltest/tcltest.tcl b/library/tcltest/tcltest.tcl index b2b020b..095a40f 100644 --- a/library/tcltest/tcltest.tcl +++ b/library/tcltest/tcltest.tcl @@ -13,36 +13,146 @@ # Copyright (c) 1994-1997 Sun Microsystems, Inc. # Copyright (c) 1998-1999 by Scriptics Corporation. # Copyright (c) 2000 by Ajuba Solutions +# Contributions from Don Porter, NIST, 2002. (not subject to US copyright) # All rights reserved. # -# RCS: @(#) $Id: tcltest.tcl,v 1.55 2002/06/22 04:19:46 dgp Exp $ - -# create the "tcltest" namespace for all testing variables and -# procedures - -package require Tcl 8.3 +# RCS: @(#) $Id: tcltest.tcl,v 1.56 2002/06/25 01:13:38 dgp Exp $ +package require Tcl 8.3 ;# uses [glob -directory] namespace eval tcltest { + variable Version 2.1 + + # Compatibility support for dumb variables defined in tcltest 1 + # Do not use these. Call [package provide Tcl] and [info patchlevel] + # yourself. You don't need tcltest to wrap it for you. + variable version [package provide Tcl] + variable patchLevel [info patchlevel] - # Export the public tcltest procs - namespace export bytestring cleanupTests customMatch debug errorChannel \ - errorFile interpreter limitConstraints loadFile loadScript \ - loadTestedCommands makeDirectory makeFile match \ - matchDirectories matchFiles normalizeMsg normalizePath \ - outputChannel outputFile preserveCore removeDirectory \ - removeFile runAllTests singleProcess skip skipDirectories \ - skipFiles temporaryDirectory test testConstraint \ - testsDirectory verbose viewFile workingDirectory - # Export the tcltest 1 compatibility procs +##### Export the public tcltest procs; several categories + # + # Export the main functional commands that do useful things + namespace export cleanupTests loadTestedCommands makeDirectory \ + makeFile removeDirectory removeFile runAllTests test + + # Export configuration commands that control the functional commands + namespace export configure customMatch errorChannel interpreter \ + outputChannel testConstraint + + # Export commands that are duplication (candidates for deprecation) + namespace export bytestring ;# dups [encoding convertfrom identity] + namespace export debug ;# [configure -debug] + namespace export errorFile ;# [configure -errfile] + namespace export limitConstraints ;# [configure -limitconstraints] + namespace export loadFile ;# [configure -loadfile] + namespace export loadScript ;# [configure -load] + namespace export match ;# [configure -match] + namespace export matchFiles ;# [configure -file] + namespace export matchDirectories ;# [configure -relateddir] + namespace export normalizeMsg ;# application of [customMatch] + namespace export normalizePath ;# [file normalize] (8.4) + namespace export outputFile ;# [configure -outfile] + namespace export preserveCore ;# [configure -preservecore] + namespace export singleProcess ;# [configure -singleproc] + namespace export skip ;# [configure -skip] + namespace export skipFiles ;# [configure -notfile] + namespace export skipDirectories ;# [configure -asidefromdir] + namespace export temporaryDirectory ;# [configure -tmpdir] + namespace export testsDirectory ;# [configure -testdir] + namespace export verbose ;# [configure -verbose] + namespace export viewFile ;# bizarre [read]-ish thing + namespace export workingDirectory ;# [cd] [pwd] + + # Export deprecated commands for tcltest 1 compatibility namespace export getMatchingFiles mainThread restoreState saveState \ threadReap - proc Default {varName value} { - variable $varName - if {![info exists $varName]} { - variable $varName $value + # tcltest::normalizePath -- + # + # This procedure resolves any symlinks in the path thus creating + # a path without internal redirection. It assumes that the + # incoming path is absolute. + # + # Arguments + # pathVar - name of variable containing path to modify. + # + # Results + # The path is modified in place. + # + # Side Effects: + # None. + # + proc normalizePath {pathVar} { + upvar $pathVar path + set oldpwd [pwd] + catch {cd $path} + set path [pwd] + cd $oldpwd + return $path + } + +##### Verification commands used to test values of variables and options + # + # Verification command that accepts everything + proc AcceptAll {value} { + return $value + } + + # Verification command that accepts valid Tcl lists + proc AcceptList { list } { + return [lrange $list 0 end] + } + + # Verification command that accepts a glob pattern + proc AcceptPattern { pattern } { + return [AcceptAll $pattern] + } + + # Verification command that accepts integers + proc AcceptInteger { level } { + return [incr level 0] + } + + # Verification command that accepts boolean values + proc AcceptBoolean { boolean } { + return [expr {$boolean && $boolean}] + } + + # Verification command that accepts (syntactically) valid Tcl scripts + proc AcceptScript { script } { + if {![info complete $script]} { + return -code error "invalid Tcl script: $script" + } + return $script + } + + # Verification command that accepts (converts to) absolute pathnames + proc AcceptAbsolutePath { path } { + return [file join [pwd] $path] + } + + # Verification command that accepts existing readable directories + proc AcceptReadable { path } { + if {![file readable $path]} { + return -code error "\"$path\" is not readable" } + return $path } + proc AcceptDirectory { directory } { + set directory [AcceptAbsolutePath $directory] + if {![file exists $directory]} { + return -code error "\"$directory\" does not exist" + } + if {![file isdir $directory]} { + return -code error "\"$directory\" is not a directory" + } + return [AcceptReadable $directory] + } + +##### Initialize internal arrays of tcltest, but only if the caller + # has not already pre-initialized them. This is done to support + # compatibility with older tests that directly access internals + # rather than go through command interfaces. + # proc ArrayDefault {varName value} { variable $varName if {[array exists $varName]} { @@ -55,41 +165,48 @@ namespace eval tcltest { array set $varName $value } - # verbose defaults to {body} - Default verbose body + # save the original environment so that it can be restored later + ArrayDefault originalEnv [array get ::env] - # Match and skip patterns default to the empty list, except for - # matchFiles, which defaults to all .test files in the - # testsDirectory and matchDirectories, which defaults to all - # directories. - Default match {} - Default skip {} - Default matchFiles {*.test} - Default skipFiles {} - Default matchDirectories {*} - Default skipDirectories {} + # initialize numTests array to keep track fo the number of tests + # that pass, fail, and are skipped. + ArrayDefault numTests [list Total 0 Passed 0 Skipped 0 Failed 0] - # By default, don't save core files - Default preserveCore 0 + # numTests will store test files as indices and the list of files + # (that should not have been) left behind by the test files. + ArrayDefault createdNewFiles {} - # output goes to stdout by default - Default outputChannel stdout - Default outputFile stdout + # initialize skippedBecause array to keep track of constraints that + # kept tests from running; a constraint name of "userSpecifiedSkip" + # means that the test appeared on the list of tests that matched the + # -skip value given to the flag; "userSpecifiedNonMatch" means that + # the test didn't match the argument given to the -match flag; both + # of these constraints are counted only if tcltest::debug is set to + # true. + ArrayDefault skippedBecause {} - # errors go to stderr by default - Default errorChannel stderr - Default errorFile stderr + # initialize the testConstraints array to keep track of valid + # predefined constraints (see the explanation for the + # InitConstraints proc for more details). + ArrayDefault testConstraints {} - # debug output doesn't get printed by default; debug level 1 spits - # up only the tests that were skipped because they didn't match or - # were specifically skipped. A debug level of 2 would spit up the - # tcltest variables and flags provided; a debug level of 3 causes - # some additional output regarding operations of the test harness. - # The tcltest package currently implements only up to debug level 3. - Default debug 0 +##### Initialize internal variables of tcltest, but only if the caller + # has not already pre-initialized them. This is done to support + # compatibility with older tests that directly access internals + # rather than go through command interfaces. + # + proc Default {varName value {verify AcceptAll}} { + variable $varName + if {![info exists $varName]} { + variable $varName [$verify $value] + } else { + variable $varName [$verify [set $varName]] + } + } # Save any arguments that we might want to pass through to other # programs. This is used by the -args flag. + # FINDUSER Default parameters {} # Count the number of files tested (0 if runAllTests wasn't called). @@ -98,57 +215,36 @@ namespace eval tcltest { # The currentFailure var stores the boolean value of whether the # current test file has had any failures. The failFiles list # stores the names of test files that had failures. - Default numTestFiles 0 - Default testSingleFile true - Default currentFailure false - Default failFiles {} + Default numTestFiles 0 AcceptInteger + Default testSingleFile true AcceptBoolean + Default currentFailure false AcceptBoolean + Default failFiles {} AcceptList # Tests should remove all files they create. The test suite will # check the current working dir for files created by the tests. # filesMade keeps track of such files created using the makeFile and # makeDirectory procedures. filesExisted stores the names of # pre-existing files. - Default filesMade {} - Default filesExisted {} - - # numTests will store test files as indices and the list of files - # (that should not have been) left behind by the test files. - ArrayDefault createdNewFiles {} - - # initialize numTests array to keep track fo the number of tests - # that pass, fail, and are skipped. - ArrayDefault numTests [list Total 0 Passed 0 Skipped 0 Failed 0] - - # initialize skippedBecause array to keep track of constraints that - # kept tests from running; a constraint name of "userSpecifiedSkip" - # means that the test appeared on the list of tests that matched the - # -skip value given to the flag; "userSpecifiedNonMatch" means that - # the test didn't match the argument given to the -match flag; both - # of these constraints are counted only if tcltest::debug is set to - # true. - ArrayDefault skippedBecause {} + Default filesMade {} AcceptList + Default filesExisted {} AcceptList + variable FilesExistedFilled 0 + proc FillFilesExisted {} { + variable FilesExistedFilled + if {$FilesExistedFilled} {return} + variable filesExisted - # initialize the testConstraints array to keep track of valid - # predefined constraints (see the explanation for the - # InitConstraints proc for more details). - ArrayDefault testConstraints {} - Default ConstraintsSpecifiedByCommandLineArgument {} + # Save the names of files that already exist in the scratch directory. + foreach file [glob -nocomplain -directory [temporaryDirectory] *] { + lappend filesExisted [file tail $file] + } + set FilesExistedFilled 1 + } # Kept only for compatibility - Default constraintsSpecified {} + Default constraintsSpecified {} AcceptList trace variable constraintsSpecified r {set ::tcltest::constraintsSpecified \ [array names ::tcltest::testConstraints] ;# } - # Don't run only the "-constraint" specified tests by default - Default limitConstraints false - - # A test application has to know how to load the tested commands - # into the interpreter. - Default loadScript {} - - # and the filename of the script file, if it exists - Default loadFile {} - # tests that use threads need to know which is the main thread Default mainThread 1 variable mainThread @@ -158,49 +254,40 @@ namespace eval tcltest { set mainThread [testthread id] } - # save the original environment so that it can be restored later - ArrayDefault originalEnv [array get ::env] - # Set workingDirectory to [pwd]. The default output directory for - # Tcl tests is the working directory. - Default workingDirectory [pwd] - Default temporaryDirectory $workingDirectory + # Tcl tests is the working directory. Whenever this value changes + # change to that directory. + variable workingDirectory + trace variable workingDirectory w \ + [namespace code {cd $workingDirectory ;#}] - # tcltest::normalizePath -- - # - # This procedure resolves any symlinks in the path thus creating - # a path without internal redirection. It assumes that the - # incoming path is absolute. - # - # Arguments - # pathVar contains the name of the variable containing the path - # to modify. - # - # Results - # The path is modified in place. - # - # Side Effects: - # None. - # - proc normalizePath {pathVar} { - upvar $pathVar path - set oldpwd [pwd] - catch {cd $path} - set path [pwd] - cd $oldpwd - return $path + Default workingDirectory [pwd] AcceptAbsolutePath + proc workingDirectory { {dir ""} } { + variable workingDirectory + if {[llength [info level 0]] == 1} { + return $workingDirectory + } + set workingDirectory [AcceptAbsolutePath $dir] } - # Tests should not rely on the current working directory. - # Files that are part of the test suite should be accessed relative - # to tcltest::testsDirectory. - Default testsDirectory [file join \ - [file dirname [info script]] .. .. tests] - variable testsDirectory - normalizePath testsDirectory + # Set the location of the execuatble + Default tcltest [info nameofexecutable] - # Default is to run each test file in a separate process - Default singleProcess 0 + # save the platform information so it can be restored later + Default originalTclPlatform [array get tcl_platform] + + # If a core file exists, save its modification time. + if {[file exists [file join [workingDirectory] core]]} { + Default coreModTime \ + [file mtime [file join [workingDirectory] core]] + } + + # stdout and stderr buffers for use when we want to store them + Default outData {} + Default errData {} + + # keep track of test level for nested test commands + variable testLevel 0 # the variables and procs that existed when saveState was called are # stored in a variable of the same name @@ -243,25 +330,377 @@ namespace eval tcltest { } } - # Set the location of the execuatble - Default tcltest [info nameofexecutable] + # output goes to stdout by default + Default outputChannel stdout + proc outputChannel { {filename ""} } { + variable outputChannel + + # Trigger auto-configuration of -outfile option, if needed. + # This is tricky because we have to trigger a trace on $debug + # so that traces attached to $outputFile are not disabled. + # We need them enabled to reflect changes back to outputChannel + set dummy [debug] + + if {[llength [info level 0]] == 1} { + return $outputChannel + } + switch -exact -- $filename { + stderr - + stdout { + set outputChannel $filename + } + default { + set outputChannel [open $filename a] + } + } + return $outputChannel + } - # save the platform information so it can be restored later - Default originalTclPlatform [array get tcl_platform] + # errors go to stderr by default + Default errorChannel stderr + proc errorChannel { {filename ""} } { + variable errorChannel + + # Trigger auto-configuration of -errfile option, if needed. + # This is tricky because we have to trigger a trace on $debug + # so that traces attached to $outputFile are not disabled. + # We need them enabled to reflect changes back to outputChannel + set dummy [debug] + + if {[llength [info level 0]] == 1} { + return $errorChannel + } + switch -exact -- $filename { + stderr - + stdout { + set errorChannel $filename + } + default { + set errorChannel [open $filename a] + } + } + return $errorChannel + } - # If a core file exists, save its modification time. - variable workingDirectory - if {[file exists [file join $workingDirectory core]]} { - Default coreModTime \ - [file mtime [file join $workingDirectory core]] +##### Set up the configurable options + # + # The configurable options of the package + variable Option; array set Option {} + + # Usage strings for those options + variable Usage; array set Usage {} + + # Verification commands for those options + variable Verify; array set Verify {} + + # Initialize the default values of the configurable options that are + # historically associated with an exported variable. If that variable + # is already set, support compatibility by accepting its pre-set value. + # Use [trace] to establish ongoing connection between the deprecated + # exported variable and the modern option kept as a true internal var. + # Also set up usage string and value testing for the option. + proc Option {option value usage {verify AcceptAll} {varName {}}} { + variable Option + variable Verify + variable Usage + variable OptionControlledVariables + set Usage($option) $usage + set Verify($option) $verify + set Option($option) [$verify $value] + if {[string length $varName]} { + variable $varName + if {[info exists $varName]} { + set Option($option) [$verify [set $varName]] + unset $varName + } + namespace eval [namespace current] \ + [list upvar 0 Option($option) $varName] + # Workaround for Bug 572889. Grrrr.... + # Track all the variables tied to options + lappend OptionControlledVariables $varName + # Later, set auto-configure read traces on all + # of them, since a single trace on Option does not work. + proc $varName {{value {}}} [subst -nocommands { + if {[llength [info level 0]] == 2} { + Configure $option [set value] + } + return [Configure $option] + }] + } } - # stdout and stderr buffers for use when we want to store them - Default outData {} - Default errData {} + proc MatchingOption {option} { + variable Option + set match [array names Option $option*] + switch -- [llength $match] { + 0 { + set sorted [lsort [array names Option]] + set values [join [lrange $sorted 0 end-1] ", "] + append values ", or [lindex $sorted end]" + return -code error "unknown option $option: should be\ + one of $values" + } + 1 { + return [lindex $match 0] + } + default { + # Exact match trumps ambiguity + if {[lsearch -exact $match $option] >= 0} { + return $option + } + set values [join [lrange $match 0 end-1] ", "] + append values ", or [lindex $match end]" + return -code error "ambiguous option $option:\ + could match $values" + } + } + } + + proc EstablishAutoConfigureTraces {} { + variable OptionControlledVariables + foreach varName [concat $OptionControlledVariables Option] { + variable $varName + trace variable $varName r [namespace code {ProcessCmdLineArgs ;#}] + } + } + + proc RemoveAutoConfigureTraces {} { + variable OptionControlledVariables + foreach varName [concat $OptionControlledVariables Option] { + variable $varName + foreach pair [trace vinfo $varName] { + foreach {op cmd} $pair break + if {[string equal r $op] + && [string match *ProcessCmdLineArgs* $cmd]} { + trace vdelete $varName $op $cmd + } + } + } + # One the traces are removed, this can become a no-op + proc RemoveAutoConfigureTraces {} {} + } + + proc Configure args { + variable Option + variable Verify + set n [llength $args] + if {$n == 0} { + return [lsort [array names Option]] + } + if {$n == 1} { + if {[catch {MatchingOption [lindex $args 0]} option]} { + return -code error $option + } + return $Option($option) + } + while {[llength $args] > 1} { + if {[catch {MatchingOption [lindex $args 0]} option]} { + return -code error $option + } + if {[catch {$Verify($option) [lindex $args 1]} value]} { + return -code error "invalid $option\ + value \"[lindex $args 1]\": $value" + } + set Option($option) $value + set args [lrange $args 2 end] + } + if {[llength $args]} { + if {[catch {MatchingOption [lindex $args 0]} option]} { + return -code error $option + } + return -code error "missing value for option $option" + } + } + proc configure args { + RemoveAutoConfigureTraces + set code [catch {eval Configure $args} msg] + return -code $code $msg + } + + proc AcceptVerbose { level } { + set level [AcceptList $level] + if {[llength $level] == 1} { + if {![regexp {^(pass|body|skip|start|error)$} $level]} { + # translate single characters abbreviations to expanded list + set level [string map {p pass b body s skip t start e error} \ + [split $level {}]] + } + } + set valid [list] + foreach v $level { + if {[regexp {^(pass|body|skip|start|error)$} $v]} { + lappend valid $v + } + } + return $valid + } + + proc IsVerbose {level} { + variable Option + return [expr {[lsearch -exact $Option(-verbose) $level] != -1}] + } + + # Default verbosity is to show bodies of failed tests + Option -verbose body { + Takes any combination of the values 'p', 's', 'b', 't' and 'e'. + Test suite will display all passed tests if 'p' is specified, all + skipped tests if 's' is specified, the bodies of failed tests if + 'b' is specified, and when tests start if 't' is specified. + ErrorInfo is displayed if 'e' is specified. + } AcceptVerbose verbose + + # Match and skip patterns default to the empty list, except for + # matchFiles, which defaults to all .test files in the + # testsDirectory and matchDirectories, which defaults to all + # directories. + Option -match {} { + Run all tests within the specified files that match one of the + list of glob patterns given. + } AcceptList match + + Option -skip {} { + Skip all tests within the specified tests (via -match) and files + that match one of the list of glob patterns given. + } AcceptList skip + + Option -file *.test { + Run tests in all test files that match the glob pattern given. + } AcceptPattern matchFiles + + Option -notfile {} { + Skip all test files that match the glob pattern given. + } AcceptPattern skipFiles + + Option -relateddir * { + Run tests in directories that match the glob pattern given. + } AcceptPattern matchDirectories + + Option -asidefromdir {} { + Skip tests in directories that match the glob pattern given. + } AcceptPattern skipDirectories + + # By default, don't save core files + Option -preservecore 0 { + If 2, save any core files produced during testing in the directory + specified by -tmpdir. If 1, notify the user if core files are + created. + } AcceptInteger preserveCore + + # debug output doesn't get printed by default; debug level 1 spits + # up only the tests that were skipped because they didn't match or + # were specifically skipped. A debug level of 2 would spit up the + # tcltest variables and flags provided; a debug level of 3 causes + # some additional output regarding operations of the test harness. + # The tcltest package currently implements only up to debug level 3. + Option -debug 0 { + Internal debug level + } AcceptInteger debug + + proc SetSelectedConstraints args { + variable Option + foreach c $Option(-constraints) { + testConstraint $c 1 + } + } + Option -constraints {} { + Do not skip the listed constraints listed in -constraints. + } AcceptList + trace variable Option(-constraints) w \ + [namespace code {SetSelectedConstraints ;#}] + + # Don't run only the "-constraint" specified tests by default + proc ClearUnselectedConstraints args { + variable Option + variable testConstraints + if {!$Option(-limitconstraints)} {return} + foreach c [array names testConstraints] { + if {[lsearch -exact $Option(-constraints) $c] == -1} { + testConstraint $elt 0 + } + } + } + Option -limitconstraints false { + whether to run only tests with the constraints + } AcceptBoolean limitConstraints + trace variable Option(-limitconstraints) w \ + [namespace code {ClearUnselectedConstraints ;#}] + + # A test application has to know how to load the tested commands + # into the interpreter. + Option -load {} { + Specifies the script to load the tested commands. + } AcceptScript loadScript + + # Default is to run each test file in a separate process + Option -singleproc 0 { + whether to run all tests in one process + } AcceptBoolean singleProcess + + proc AcceptTemporaryDirectory { directory } { + set directory [AcceptAbsolutePath $directory] + if {![file exists $directory]} { + file mkdir $directory + } + set directory [AcceptDirectory $directory] + if {![file writable $directory]} { + return -code error "\"$directory\" is not writeable" + } + return $directory + } + + # Directory where files should be created + Option -tmpdir [workingDirectory] { + Save temporary files in the specified directory. + } AcceptTemporaryDirectory temporaryDirectory + trace variable Option(-tmpdir) w \ + [namespace code {normalizePath Option(-tmpdir) ;#}] + + # Tests should not rely on the current working directory. + # Files that are part of the test suite should be accessed relative + # to [testsDirectory] + Option -testdir [file join [file dirname [info script]] .. .. tests] { + Search tests in the specified directory. + } AcceptDirectory testsDirectory + trace variable Option(-testdir) w \ + [namespace code {normalizePath Option(-testdir) ;#}] + + proc AcceptLoadFile { file } { + if {[string equal "" $file]} {return $file} + set file [file join [temporaryDirectory] $file] + return [AcceptReadable $file] + } + proc ReadLoadScript {args} { + variable Option + if {[string equal "" $Option(-loadfile)]} {return} + set tmp [open $Option(-loadfile) r] + loadScript [read $tmp] + close $tmp + } + Option -loadfile {} { + Read the script to load the tested commands from the specified file. + } AcceptLoadFile loadFile + trace variable Option(-loadfile) w [namespace code ReadLoadScript] + + proc AcceptOutFile { file } { + if {[string equal stderr $file]} {return $file} + if {[string equal stdout $file]} {return $file} + return [file join [temporaryDirectory] $file] + } + + # output goes to stdout by default + Option -outfile stdout { + Send output from test runs to the specified file. + } AcceptOutFile outputFile + trace variable Option(-outfile) w \ + [namespace code {outputChannel $Option(-outfile) ;#}] + + # errors go to stderr by default + Option -errfile stderr { + Send errors from test runs to the specified file. + } AcceptOutFile errorFile + trace variable Option(-errfile) w \ + [namespace code {errorChannel $Option(-errfile) ;#}] - # keep track of test level for nested test commands - variable testLevel 0 } ##################################################################### @@ -357,305 +796,16 @@ proc tcltest::DebugDo {level script} { ##################################################################### -# tcltest::CheckDirectory -- -# -# This procedure checks whether the specified path is a readable -# and/or writable directory. If one of the conditions is not -# satisfied an error is printed and the application aborted. The -# procedure assumes that the caller already checked the existence -# of the path. -# -# Arguments -# rw Information what attributes to check. Allowed values: -# r, w, rw, wr. If 'r' is part of the value the directory -# must be readable. 'w' associates to 'writable'. -# dir The directory to check. -# errMsg The string to prepend to the actual error message before -# printing it. -# -# Results -# none -# -# Side Effects: -# None. -# - -proc tcltest::CheckDirectory {rw dir errMsg} { - # Allowed values for 'rw': r, w, rw, wr - - if {![file isdir $dir]} { - return -code error "$errMsg \"$dir\" is not a directory" - } elseif {([string first w $rw] >= 0) && ![file writable $dir]} { - return -code error "$errMsg \"$dir\" is not writeable" - } elseif {([string first r $rw] >= 0) && ![file readable $dir]} { - return -code error "$errMsg \"$dir\" is not readable" - } - return -} - -# tcltest::MakeAbsolutePath -- -# -# This procedure checks whether the incoming path is absolute or -# not. Makes it absolute if it was not. -# -# Arguments -# pathVar contains the name of the variable containing the path to -# modify. -# prefix is optional, contains the path to use to make the other an -# absolute one. The current working directory is used if it -# was not specified. -# -# Results -# The path is modified in place. -# -# Side Effects: -# None. -# - -proc tcltest::MakeAbsolutePath {pathVar {prefix {}}} { - upvar $pathVar path - - if {![string equal [file pathtype $path] "absolute"]} { - if {[string equal {} $prefix]} { - set prefix [pwd] - } - - set path [file join $prefix $path] - } - return $path -} - -##################################################################### - -# tcltest::<variableName> -# -# Accessor functions for tcltest variables that can be modified -# externally. These are vars that could otherwise be modified -# using command line arguments to tcltest. - -# Many of them are all the same boilerplate: - -namespace eval tcltest { - variable var - foreach var { - match skip matchFiles skipFiles matchDirectories - skipDirectories preserveCore debug loadScript singleProcess - mainThread ConstraintsSpecifiedByCommandLineArgument - } { - proc $var { {new ""} } [subst -nocommands { - variable $var - if {[llength [info level 0]] == 1} { - return [set $var] - } - set $var \$new - }] - } - unset var -} - -# The rest have something special to deal with: - -# tcltest::verbose -- +# tcltest::mainThread # -# Set or return the verbosity level (tcltest::verbose) for tests. -# This determines what gets printed to the screen and when, with -# regard to the running of the tests. The proc does not check for -# invalid values. It assumes that a string that doesn't match its -# predefined keywords is a string containing letter-specified -# verbosity levels. -# -# Arguments: -# A string containing any combination of 'pbste' or a list of -# keywords (listed in parens) -# p = print output whenever a test passes (pass) -# b = print the body of the test when it fails (body) -# s = print when a test is skipped (skip) -# t = print when a test starts (start) -# e = print errorInfo and errorCode when a test encounters an -# error (error) +# Accessor command for tcltest variable mainThread. # -# Results: -# content of tcltest::verbose -# -# Side effects: -# None. - -proc tcltest::verbose { {level ""} } { - variable verbose - if {[llength [info level 0]] == 1} { - return $verbose - } - if {[llength $level] > 1} { - set verbose $level - } else { - if {[regexp {pass|body|skip|start|error} $level]} { - set verbose $level - } else { - set levelList [split $level {}] - set verbose [string map \ - {p pass b body s skip t start e error} $levelList] - } - } - return $verbose -} - -# tcltest::IsVerbose -- -# -# Returns true if argument is one of the verbosity levels -# currently being used; returns false otherwise. -# -# Arguments: -# level -# -# Results: -# boolean 1 (true) or 0 (false), depending on whether or not the -# level provided is one of the ones stored in tcltest::verbose. -# -# Side effects: -# None. - -proc tcltest::IsVerbose {level} { - if {[lsearch -exact [verbose] $level] == -1} { - return 0 - } - return 1 -} - -# tcltest::outputChannel -- -# -# set or return the output file descriptor based on the supplied -# file name (where tcltest puts all of its output) -# -# Arguments: -# output file descriptor -# -# Results: -# file descriptor corresponding to supplied file name (or -# currently set file descriptor, if no new filename was supplied) -# - this is the content of tcltest::outputChannel -# -# Side effects: -# None. - -proc tcltest::outputChannel { {filename ""} } { - variable outputChannel - if {[llength [info level 0]] == 1} { - return $outputChannel - } - switch -exact -- $filename { - stderr - - stdout { - set outputChannel $filename - } - default { - set outputChannel [open $filename w] - } - } - return $outputChannel -} - -# tcltest::outputFile -- -# -# set or return the output file name (where tcltest puts all of -# its output); calls [outputChannel] to set the corresponding -# file descriptor -# -# Arguments: -# output file name -# -# Results: -# file name corresponding to supplied file name (or currently set -# file name, if no new filename was supplied) - this is the -# content of tcltest::outputFile -# -# Side effects: -# if the file name supplied is relative, it will be made absolute -# with respect to the predefined temporaryDirectory - -proc tcltest::outputFile { {filename ""} } { - variable outputFile - if {[llength [info level 0]] == 1} { - return $outputFile - } - switch -exact -- $filename { - stderr - - stdout { - # do nothing - } - default { - MakeAbsolutePath filename [temporaryDirectory] - } - } - outputChannel $filename - set outputFile $filename -} - -# tcltest::errorChannel -- -# -# set or return the error file descriptor based on the supplied -# file name (where tcltest sends all its errors) -# -# Arguments: -# error file name -# -# Results: -# file descriptor corresponding to the supplied file name (or -# currently set file descriptor, if no new filename was supplied) -# - this is the content of tcltest::errorChannel -# -# Side effects: -# opens the descriptor in w mode unless the filename is set to -# stderr or stdout - -proc tcltest::errorChannel { {filename ""} } { - variable errorChannel - if {[llength [info level 0]] == 1} { - return $errorChannel - } - switch -exact -- $filename { - stderr - - stdout { - set errorChannel $filename - } - default { - set errorChannel [open $filename w] - } - } - return $errorChannel -} - -# tcltest::errorFile -- -# -# set or return the error file name; calls [errorChannel] to set -# the corresponding file descriptor -# -# Arguments: -# error file name -# -# Results: -# content of tcltest::errorFile -# -# Side effects: -# if the file name supplied is relative, it will be made absolute -# with respect to the predefined temporaryDirectory - -proc tcltest::errorFile { {filename ""} } { - variable errorFile +proc tcltest::mainThread { {new ""} } { + variable mainThread if {[llength [info level 0]] == 1} { - return $errorFile - } - switch -exact -- $filename { - stderr - - stdout { - # do nothing - } - default { - MakeAbsolutePath filename [temporaryDirectory] - } + return $mainThread } - set errorFile $filename - errorChannel $errorFile - return $errorFile + set mainThread $new } # tcltest::testConstraint -- @@ -691,168 +841,6 @@ proc tcltest::testConstraint {constraint {value ""}} { set testConstraints($constraint) $value } -# tcltest::limitConstraints -- -# -# sets/gets flag indicating whether tests run are limited only -# to those matching constraints specified by the -constraints -# command line option. -# -# Arguments: -# new boolean value for the flag -# -# Results: -# content of tcltest::limitConstraints -# -# Side effects: -# None. - -proc tcltest::limitConstraints { {value ""} } { - variable testConstraints - variable limitConstraints - DebugPuts 3 "entering limitConstraints $value" - if {[llength [info level 0]] == 1} { - return $limitConstraints - } - # Check for boolean values - if {[catch {expr {$value && $value}} msg]} { - return -code error $msg - } - set limitConstraints $value - if {!$limitConstraints} {return $limitConstraints} - foreach elt [array names testConstraints] { - if {[lsearch -exact [ConstraintsSpecifiedByCommandLineArgument] $elt] - == -1} { - testConstraint $elt 0 - } - } - return $limitConstraints -} - -# tcltest::loadFile -- -# -# set the load file (containing the load script); -# put the content of the load file into loadScript -# -# Arguments: -# script's file name -# -# Results: -# content of tcltest::loadFile -# -# Side effects: -# None. - -proc tcltest::loadFile { {scriptFile ""} } { - variable loadFile - if {[llength [info level 0]] == 1} { - return $loadFile - } - MakeAbsolutePath scriptFile [temporaryDirectory] - set tmp [open $scriptFile r] - loadScript [read $tmp] - close $tmp - set loadFile $scriptFile -} - -# tcltest::workingDirectory -- -# -# set workingDirectory to the given path. If the path is -# relative, make it absolute. Change directory to the stated -# working directory, if resetting the value -# -# Arguments: -# directory name -# -# Results: -# content of tcltest::workingDirectory -# -# Side effects: -# None. - -proc tcltest::workingDirectory { {dir ""} } { - variable workingDirectory - if {[llength [info level 0]] == 1} { - return $workingDirectory - } - set workingDirectory $dir - MakeAbsolutePath workingDirectory - cd $workingDirectory - return $workingDirectory -} - -# tcltest::temporaryDirectory -- -# -# Set temporaryDirectory to the given path. If the path is -# relative, make it absolute. If the file exists but is not a dir, -# then return an error. -# -# If temporaryDirectory does not already exist, create it. If you -# cannot create it, then return an error (the file mkdir isn't -# caught and will propagate). -# -# Arguments: -# directory name -# -# Results: -# content of tcltest::temporaryDirectory -# -# Side effects: -# None. - -proc tcltest::temporaryDirectory { {dir ""} } { - variable temporaryDirectory - if {[llength [info level 0]] == 1} { - return $temporaryDirectory - } - set temporaryDirectory $dir - MakeAbsolutePath temporaryDirectory - - if {[file exists $temporaryDirectory]} { - CheckDirectory rw $temporaryDirectory \ - {bad argument for temporary directory: } - } else { - file mkdir $temporaryDirectory - } - - normalizePath temporaryDirectory -} - -# tcltest::testsDirectory -- -# -# Set testsDirectory to the given path. If the path is relative, -# make it absolute. If the file exists but is not a dir, then -# return an error. -# -# If testsDirectory does not already exist, return an error. -# -# Arguments: -# directory name -# -# Results: -# content of tcltest::testsDirectory -# -# Side effects: -# None. - -proc tcltest::testsDirectory { {dir ""} } { - variable testsDirectory - if {[llength [info level 0]] == 1} { - return $testsDirectory - } - - set testsDirectory $dir - MakeAbsolutePath testsDirectory - set testDirError "bad argument for tests directory: " - if {[file exists $testsDirectory]} { - CheckDirectory r $testsDirectory $testDirError - } else { - return -code error \ - "$testDirError \"$testsDirectory\" does not exist" - } - - normalizePath testsDirectory -} - # tcltest::interpreter -- # # the interpreter name stored in tcltest::tcltest @@ -1242,15 +1230,6 @@ proc tcltest::DefineConstraintInitializers {} { # Handle command line arguments (from argv) and default arg settings # (in TCLTEST_OPTIONS). -# tcltest::PrintUsageInfoHook -# -# Hook used for customization of display of usage information. -# - -if {[llength [info commands tcltest::PrintUsageInfoHook]] == 0} { - proc tcltest::PrintUsageInfoHook {} {} -} - # tcltest::PrintUsageInfo # # Prints out the usage information for package tcltest. This can @@ -1265,93 +1244,54 @@ if {[llength [info commands tcltest::PrintUsageInfoHook]] == 0} { # Side Effects: # none proc tcltest::PrintUsageInfo {} { - puts "Usage: [file tail [info nameofexecutable]]\ - script ?-help? ?flag value? ... \n\ - Available flags (and valid input values) are:\n\ - -help Display this usage information.\n\ - -verbose level Takes any combination of the values\n\ - \t 'p', 's', 'b', 't' and 'e'. \ - Test suite will\n\ - \t display all passed tests if 'p' is\n\ - \t specified, all skipped tests if 's'\n\ - \t is specified, the bodies of\n\ - \t failed tests if 'b' is specified,\n\ - \t and when tests start if 't' is specified.\n\ - \t ErrorInfo is displayed\ - if 'e' is specified.\n\ - \t The default value is 'b'.\n\ - -constraints list Do not skip the listed constraints\n\ - -limitconstraints bool Only run tests with the constraints\n\ - \t listed in -constraints.\n\ - -match pattern Run all tests within the specified\n\ - \t files that match the glob pattern\n\ - \t given.\n\ - -skip pattern Skip all tests within the set of\n\ - \t specified tests (via -match) and\n\ - \t files that match the glob pattern\n\ - \t given.\n\ - -file pattern Run tests in all test files that\n\ - \t match the glob pattern given.\n\ - -notfile pattern Skip all test files that match the\n\ - \t glob pattern given.\n\ - -relateddir pattern Run tests in directories that match\n\ - \t the glob pattern given.\n\ - -asidefromdir pattern Skip tests in directories that match\n\ - \t the glob pattern given.\n\ - -preservecore level If 2, save any core files produced\n\ - \t during testing in the directory\n\ - \t specified by -tmpdir. If 1, notify the\n\ - \t user if core files are created. \ - The default\n\ - \t is [preserveCore].\n\ - -tmpdir directory Save temporary files\ - in the specified\n\ - \t directory. The default value is\n\ - \t [temporaryDirectory]\n\ - -testdir directories Search tests in the specified\n\ - \t directories. The default value is\n\ - \t [testsDirectory].\n\ - -outfile file Send output from test runs to the\n\ - \t specified file. The default is\n\ - \t stdout.\n\ - -errfile file Send errors from test runs to the\n\ - \t specified file. The default is\n\ - \t stderr.\n\ - -loadfile file Read the script to load the tested\n\ - \t commands from the specified file.\n\ - -load script Specifies the script\ - to load the tested\n\ - \t commands.\n\ - -debug level Internal debug flag." + puts [Usage] PrintUsageInfoHook - return } -# tcltest::processCmdLineArgsFlagsHook -- -# -# This hook is used to add to the list of command line arguments -# that are processed by tcltest::ProcessFlags. It is called at -# the beginning of ProcessFlags. -# - -if {[llength [info commands \ - tcltest::processCmdLineArgsAddFlagsHook]] == 0} { - proc tcltest::processCmdLineArgsAddFlagsHook {} {} +proc tcltest::Usage { {option ""} } { + variable Usage + variable Verify + if {[llength [info level 0]] == 1} { + set msg "Usage: [file tail [info nameofexecutable]] script " + append msg "?-help? ?flag value? ... \n" + append msg "Available flags (and valid input values) are:" + + set max 0 + set allOpts [concat -help [Configure]] + foreach opt $allOpts { + set foo [Usage $opt] + foreach [list x type($opt) usage($opt)] $foo break + set line($opt) " $opt $type($opt) " + set length($opt) [string length $line($opt)] + if {$length($opt) > $max} {set max $length($opt)} + } + set rest [expr {72 - $max}] + foreach opt $allOpts { + append msg \n$line($opt) + append msg [string repeat " " [expr {$max - $length($opt)}]] + set u [string trim $usage($opt)] + catch {append u " (default: \[[Configure $opt]])"} + regsub -all {\s*\n\s*} $u " " u + while {[string length $u] > $rest} { + set break [string wordstart $u $rest] + if {$break == 0} { + set break [string wordend $u 0] + } + append msg [string range $u 0 [expr {$break - 1}]] + set u [string trim [string range $u $break end]] + append msg \n[string repeat " " $max] + } + append msg $u + } + return $msg\n + } elseif {[string equal -help $option]} { + return [list -help "" "Display this usage information."] + } else { + set type [lindex [info args $Verify($option)] 0] + return [list $option $type $Usage($option)] + } } -# tcltest::processCmdLineArgsHook -- -# -# This hook is used to actually process the flags added by -# tcltest::processCmdLineArgsAddFlagsHook. It is called at the -# end of ProcessFlags. -# -# Arguments: -# flags The flags that have been pulled out of argv -# - -if {[llength [info commands tcltest::processCmdLineArgsHook]] == 0} { - proc tcltest::processCmdLineArgsHook {flag} {} -} # tcltest::ProcessFlags -- # @@ -1376,125 +1316,39 @@ proc tcltest::ProcessFlags {flagArray} { exit 1 } - catch {array set flag $flagArray} - - # -help is not listed since it has already been processed - lappend defaultFlags -verbose -match -skip -constraints \ - -outfile -errfile -debug -tmpdir -file -notfile \ - -preservecore -limitconstraints -testdir \ - -load -loadfile -asidefromdir \ - -relateddir -singleproc - set defaultFlags \ - [concat $defaultFlags [processCmdLineArgsAddFlagsHook]] - - # Set verbose to the arg of the -verbose flag, if given - if {[info exists flag(-verbose)]} { - verbose $flag(-verbose) - } - - # Set match to the arg of the -match flag, if given. - if {[info exists flag(-match)]} { - match $flag(-match) - } - - # Set skip to the arg of the -skip flag, if given - if {[info exists flag(-skip)]} { - skip $flag(-skip) - } - - # Handle the -file and -notfile flags - if {[info exists flag(-file)]} { - matchFiles $flag(-file) - } - if {[info exists flag(-notfile)]} { - skipFiles $flag(-notfile) - } - - # Handle -relateddir and -asidefromdir flags - if {[info exists flag(-relateddir)]} { - matchDirectories $flag(-relateddir) - } - if {[info exists flag(-asidefromdir)]} { - skipDirectories $flag(-asidefromdir) - } - - # Use the -constraints flag, if given, to turn on constraints that - # are turned off by default: userInteractive knownBug nonPortable. - - if {[info exists flag(-constraints)]} { - foreach elt $flag(-constraints) { - testConstraint $elt 1 - } - ConstraintsSpecifiedByCommandLineArgument $flag(-constraints) - } + if {[llength $flagArray] == 0} { + RemoveAutoConfigureTraces + } else { + set args $flagArray + while {[llength $args] && [catch {eval configure $args} msg]} { + + # Something went wrong parsing $args for tcltest options + # Check whether the problem is "unknown option" + if {[regexp {^unknown option (\S+):} $msg -> option]} { + # Could be this is an option the Hook knows about + if {[lsearch -exact \ + [processCmdLineArgsAddFlagHook] $option] == -1} { + # Nope. Report the error, but keep going + puts [errorChannel] "WARNING: $msg" + } + } else { + # error is something other than "unknown option" + # notify user of the error; and exit + puts [errorChannel] $msg + exit 1 + } - # Use the -limitconstraints flag, if given, to tell the harness to - # limit tests run to those that were specified using the - # -constraints flag. If the -constraints flag was not specified, - # print out an error and exit. - if {[info exists flag(-limitconstraints)]} { - if {![info exists flag(-constraints)]} { - error "-limitconstraints flag can only\ - be used with -constraints" + # To recover, find that unknown option and remove up to it. + # then retry + while {![string equal [lindex $args 0] $option]} { + set args [lrange $args 2 end] + } + set args [lrange $args 2 end] } - limitConstraints $flag(-limitconstraints) - } - - # Set the temporaryDirectory to the arg of -tmpdir, if given. - - if {[info exists flag(-tmpdir)]} { - temporaryDirectory $flag(-tmpdir) - } - - # Set the testsDirectory to the arg of -testdir, if given. - - if {[info exists flag(-testdir)]} { - testsDirectory $flag(-testdir) - } - - # If an alternate error or output files are specified, change the - # default channels. - - if {[info exists flag(-outfile)]} { - outputFile $flag(-outfile) - } - - if {[info exists flag(-errfile)]} { - errorFile $flag(-errfile) - } - - # If a load script was specified, either directly or through - # a file, remember it for later usage. - - if {[info exists flag(-load)] && \ - ([lsearch -exact $flagArray -load] > \ - [lsearch -exact $flagArray -loadfile])} { - loadScript $flag(-load) - } - - if {[info exists flag(-loadfile)] && \ - ([lsearch -exact $flagArray -loadfile] > \ - [lsearch -exact $flagArray -load]) } { - loadFile $flag(-loadfile) - } - - # If the user specifies debug testing, print out extra information - # during the run. - if {[info exists flag(-debug)]} { - debug $flag(-debug) - } - - # Handle -preservecore - if {[info exists flag(-preservecore)]} { - preserveCore $flag(-preservecore) - } - - # Handle -singleproc flag - if {[info exists flag(-singleproc)]} { - singleProcess $flag(-singleproc) } # Call the hook + array set flag $flagArray processCmdLineArgsHook [array get flag] return } @@ -1898,6 +1752,7 @@ proc tcltest::test {name description args} { variable testLevel DebugPuts 3 "test $name $args" + FillFilesExisted incr testLevel # Pre-define everything to null except output and errorOutput. We @@ -2239,8 +2094,6 @@ proc tcltest::RunTest { } { variable testLevel variable numTests - variable skip - variable match variable testConstraints variable originalTclPlatform variable coreModTime @@ -2250,7 +2103,7 @@ proc tcltest::RunTest { } # skip the test if it's name matches an element of skip - foreach pattern $skip { + foreach pattern [skip] { if {[string match $pattern $name]} { if {$testLevel == 1} { incr numTests(Skipped) @@ -2261,9 +2114,9 @@ proc tcltest::RunTest { } # skip the test if it's name doesn't match any element of match - if {[llength $match] > 0} { + if {[llength [match]] > 0} { set ok 0 - foreach pattern $match { + foreach pattern [match] { if {[string match $pattern $name]} { set ok 1 break @@ -2417,6 +2270,7 @@ proc tcltest::cleanupTests {{calledFromAllFile 0}} { variable originalTclPlatform variable coreModTime + FillFilesExisted set testFileName [file tail [info script]] # Call the cleanup hook @@ -2651,7 +2505,7 @@ proc tcltest::GetMatchingFiles { {searchDirectory ""} } { set matchFileList [concat $matchFileList \ [glob -directory $directory -nocomplain -- $match]] } - if {[string compare {} $tcltest::skipFiles]} { + if {[string compare {} [skipFiles]]} { set skipFileList {} foreach skip [skipFiles] { set skipFileList [concat $skipFileList \ @@ -2749,12 +2603,12 @@ proc tcltest::GetMatchingDirectories {rootdir} { # None. proc tcltest::runAllTests { {shell ""} } { - global argv variable testSingleFile variable numTestFiles variable numTests variable failFiles + FillFilesExisted if {[llength [info level 0]] == 1} { set shell [interpreter] } @@ -2807,12 +2661,21 @@ proc tcltest::runAllTests { {shell ""} } { foreach file [lsort [GetMatchingFiles]] { set tail [file tail $file] puts [outputChannel] $tail + flush [outputChannel] if {[singleProcess]} { incr numTestFiles uplevel 1 [list ::source $file] } else { - set cmd [linsert $argv 0 | $shell $file] + # Pass along our configuration to the child processes. + # EXCEPT for the -outfile, because the parent process + # needs to read and process output of children. + set childargv [list] + foreach opt [Configure] { + if {[string equal $opt -outfile]} {continue} + lappend childargv $opt [Configure $opt] + } + set cmd [linsert $childargv 0 | $shell $file] if {[catch { incr numTestFiles set pipeFd [open $cmd "r"] @@ -3007,6 +2870,7 @@ proc tcltest::normalizeMsg {msg} { proc tcltest::makeFile {contents name {directory ""}} { global tcl_platform variable filesMade + FillFilesExisted if {[llength [info level 0]] == 3} { set directory [temporaryDirectory] @@ -3049,6 +2913,7 @@ proc tcltest::makeFile {contents name {directory ""}} { # None. proc tcltest::removeFile {name {directory ""}} { + FillFilesExisted if {[llength [info level 0]] == 2} { set directory [temporaryDirectory] } @@ -3077,6 +2942,7 @@ proc tcltest::removeFile {name {directory ""}} { proc tcltest::makeDirectory {name {directory ""}} { variable filesMade + FillFilesExisted if {[llength [info level 0]] == 2} { set directory [temporaryDirectory] } @@ -3104,6 +2970,7 @@ proc tcltest::makeDirectory {name {directory ""}} { # None proc tcltest::removeDirectory {name {directory ""}} { + FillFilesExisted if {[llength [info level 0]] == 2} { set directory [temporaryDirectory] } @@ -3128,6 +2995,7 @@ proc tcltest::removeDirectory {name {directory ""}} { proc tcltest::viewFile {name {directory ""}} { global tcl_platform + FillFilesExisted if {[llength [info level 0]] == 2} { set directory [temporaryDirectory] } @@ -3348,21 +3216,47 @@ namespace eval tcltest { } else { proc initConstraintsHook {} {} } - ProcessCmdLineArgs - - # Save the names of files that already exist in - # the output directory. - variable file {} - foreach file [glob -nocomplain -directory [temporaryDirectory] *] { - lappend filesExisted [file tail $file] - } # Define the standard match commands customMatch exact [list string equal] customMatch glob [list string match] customMatch regexp [list regexp --] - unset file -} -package provide tcltest 2.1 + proc LoadTimeConfigurationRequired {} { + set required false + if {[info exists ::env(TCLTEST_OPTIONS)]} { + # Respect the environment variable at package load time, + # so that it effectively establishes new defaults. + set required true + } + if {[info exists ::argv] && [lsearch -exact $::argv -help]} { + # The command line asks for -help, so give it (and exit) + # right now. ([configure] does not process -help) + set required true + } + foreach hook { PrintUsageInfoHook processCmdLineArgsHook + processCmdLineArgsAddFlagHook } { + if {[string equal [namespace current] [namespace qualifiers \ + [namespace which $hook]]]} { + set required true + } else { + proc $hook args {} + } + } + return $required + } + # Only initialize configurable options from the command line arguments + # at package load time if necessary for backward compatibility. This + # lets the tcltest user call [configure] for themselves if they wish. + # Traves are established for auto-configuration from the command line + # if any configurable options are accessed before the user calls + # [configure]. + if {[LoadTimeConfigurationRequired]} { + ProcessCmdLineArgs + } else { + EstablishAutoConfigureTraces + } + + package provide [namespace tail [namespace current]] $Version +} |