summaryrefslogtreecommitdiffstats
path: root/library/tcltest
diff options
context:
space:
mode:
Diffstat (limited to 'library/tcltest')
-rw-r--r--library/tcltest/pkgIndex.tcl2
-rw-r--r--library/tcltest/tcltest.tcl110
2 files changed, 93 insertions, 19 deletions
diff --git a/library/tcltest/pkgIndex.tcl b/library/tcltest/pkgIndex.tcl
index af5a397..345740a 100644
--- a/library/tcltest/pkgIndex.tcl
+++ b/library/tcltest/pkgIndex.tcl
@@ -9,4 +9,4 @@
# full path name of this file's directory.
if {![package vsatisfies [package provide Tcl] 8.3]} {return}
-package ifneeded tcltest 2.2.1 [list source [file join $dir tcltest.tcl]]
+package ifneeded tcltest 2.2.2 [list source [file join $dir tcltest.tcl]]
diff --git a/library/tcltest/tcltest.tcl b/library/tcltest/tcltest.tcl
index 291c564..f61fe9e 100644
--- a/library/tcltest/tcltest.tcl
+++ b/library/tcltest/tcltest.tcl
@@ -16,7 +16,7 @@
# Contributions from Don Porter, NIST, 2002. (not subject to US copyright)
# All rights reserved.
#
-# RCS: @(#) $Id: tcltest.tcl,v 1.76 2003/01/27 15:25:46 dgp Exp $
+# RCS: @(#) $Id: tcltest.tcl,v 1.77 2003/02/06 16:29:19 dgp Exp $
package require Tcl 8.3 ;# uses [glob -directory]
namespace eval tcltest {
@@ -24,7 +24,7 @@ namespace eval tcltest {
# When the version number changes, be sure to update the pkgIndex.tcl file,
# and the install directory in the Makefiles. When the minor version
# changes (new feature) be sure to update the man page as well.
- variable Version 2.2.1
+ variable Version 2.2.2
# Compatibility support for dumb variables defined in tcltest 1
# Do not use these. Call [package provide Tcl] and [info patchlevel]
@@ -230,19 +230,21 @@ namespace eval tcltest {
# filesMade keeps track of such files created using the makeFile and
# makeDirectory procedures. filesExisted stores the names of
# pre-existing files.
+ #
+ # Note that $filesExisted lists only those files that exist in
+ # the original [temporaryDirectory].
Default filesMade {} AcceptList
Default filesExisted {} AcceptList
- variable FilesExistedFilled 0
proc FillFilesExisted {} {
- variable FilesExistedFilled
- if {$FilesExistedFilled} {return}
variable filesExisted
# Save the names of files that already exist in the scratch directory.
foreach file [glob -nocomplain -directory [temporaryDirectory] *] {
lappend filesExisted [file tail $file]
}
- set FilesExistedFilled 1
+
+ # After successful filling, turn this into a no-op.
+ proc FillFilesExisted args {}
}
# Kept only for compatibility
@@ -337,20 +339,59 @@ namespace eval tcltest {
}
}
+ variable ChannelsWeOpened; array set ChannelsWeOpened {}
# output goes to stdout by default
Default outputChannel stdout
proc outputChannel { {filename ""} } {
variable outputChannel
-
- # Trigger auto-configuration of -outfile option, if needed.
- # This is tricky because we have to trigger a trace on $debug
- # so that traces attached to $outputFile are not disabled.
- # We need them enabled to reflect changes back to outputChannel
- set dummy [debug]
+ variable ChannelsWeOpened
+
+ # This is very subtle and tricky, so let me try to explain.
+ # (Hopefully this longer comment will be clear when I come
+ # back in a few months, unlike its predecessor :) )
+ #
+ # The [outputChannel] command (and underlying variable) have to
+ # be kept in sync with the [configure -outfile] configuration
+ # option ( and underlying variable Option(-outfile) ). This is
+ # accomplished with a write trace on Option(-outfile) that will
+ # update [outputChannel] whenver a new value is written. That
+ # much is easy.
+ #
+ # The trick is that in order to maintain compatibility with
+ # version 1 of tcltest, we must allow every configuration option
+ # to get its inital value from command line arguments. This is
+ # accomplished by setting initial read traces on all the
+ # configuration options to parse the command line option the first
+ # time they are read. These traces are cancelled whenever the
+ # program itself calls [configure].
+ #
+ # OK, then so to support tcltest 1 compatibility, it seems we want
+ # to get the return from [outputFile] to trigger the read traces,
+ # just in case.
+ #
+ # BUT! A little known feature of Tcl variable traces is that
+ # traces are disabled during the handling of other traces. So,
+ # if we trigger read traces on Option(-outfile) and that triggers
+ # command line parsing which turns around and sets an initial
+ # value for Option(-outfile) -- <whew!> -- the write trace that
+ # would keep [outputChannel] in sync with that new initial value
+ # would not fire!
+ #
+ # SO, finally, as a workaround, instead of triggering read traces
+ # by invoking [outputFile], we instead trigger the same set of
+ # read traces by invoking [debug]. Any command that reads a
+ # configuration option would do. [debug] is just a handy one.
+ # The end result is that we support tcltest 1 compatibility and
+ # keep outputChannel and -outfile in sync in all cases.
+ debug
if {[llength [info level 0]] == 1} {
return $outputChannel
}
+ if {[info exists ChannelsWeOpened($outputChannel)]} {
+ close $outputChannel
+ unset ChannelsWeOpened($outputChannel)
+ }
switch -exact -- $filename {
stderr -
stdout {
@@ -358,6 +399,21 @@ namespace eval tcltest {
}
default {
set outputChannel [open $filename a]
+ set ChannelsWeOpened($outputChannel) 1
+
+ # If we created the file in [temporaryDirectory], then
+ # [cleanupTests] will delete it, unless we claim it was
+ # already there.
+ set outdir [normalizePath [file dirname \
+ [file join [pwd] $filename]]]
+ if {[string equal $outdir [temporaryDirectory]]} {
+ variable filesExisted
+ FillFilesExisted
+ set filename [file tail $filename]
+ if {[lsearch -exact $filesExisted $filename] == -1} {
+ lappend filesExisted $filename
+ }
+ }
}
}
return $outputChannel
@@ -367,16 +423,19 @@ namespace eval tcltest {
Default errorChannel stderr
proc errorChannel { {filename ""} } {
variable errorChannel
+ variable ChannelsWeOpened
- # Trigger auto-configuration of -errfile option, if needed.
- # This is tricky because we have to trigger a trace on $debug
- # so that traces attached to $outputFile are not disabled.
- # We need them enabled to reflect changes back to outputChannel
- set dummy [debug]
+ # This is subtle and tricky. See the comment above in
+ # [outputChannel] for a detailed explanation.
+ debug
if {[llength [info level 0]] == 1} {
return $errorChannel
}
+ if {[info exists ChannelsWeOpened($errorChannel)]} {
+ close $errorChannel
+ unset ChannelsWeOpened($errorChannel)
+ }
switch -exact -- $filename {
stderr -
stdout {
@@ -384,6 +443,21 @@ namespace eval tcltest {
}
default {
set errorChannel [open $filename a]
+ set ChannelsWeOpened($errorChannel) 1
+
+ # If we created the file in [temporaryDirectory], then
+ # [cleanupTests] will delete it, unless we claim it was
+ # already there.
+ set outdir [normalizePath [file dirname \
+ [file join [pwd] $filename]]]
+ if {[string equal $outdir [temporaryDirectory]]} {
+ variable filesExisted
+ FillFilesExisted
+ set filename [file tail $filename]
+ if {[lsearch -exact $filesExisted $filename] == -1} {
+ lappend filesExisted $filename
+ }
+ }
}
}
return $errorChannel
@@ -491,7 +565,7 @@ namespace eval tcltest {
}
}
}
- # One the traces are removed, this can become a no-op
+ # Once the traces are removed, this can become a no-op
proc RemoveAutoConfigureTraces {} {}
}