diff options
Diffstat (limited to 'library/tm.tcl')
-rw-r--r-- | library/tm.tcl | 230 |
1 files changed, 121 insertions, 109 deletions
diff --git a/library/tm.tcl b/library/tm.tcl index d2af4f5..baa268d 100644 --- a/library/tm.tcl +++ b/library/tm.tcl @@ -1,44 +1,48 @@ # -*- tcl -*- # -# Searching for Tcl Modules. Defines a procedure, declares it as the primary -# command for finding packages, however also uses the former 'package unknown' -# command as a fallback. +# Searching for Tcl Modules. Defines a procedure, declares it as the +# primary command for finding packages, however also uses the former +# 'package unknown' command as a fallback. # -# Locates all possible packages in a directory via a less restricted glob. The -# targeted directory is derived from the name of the requested package, i.e. -# the TM scan will look only at directories which can contain the requested -# package. It will register all packages it found in the directory so that -# future requests have a higher chance of being fulfilled by the ifneeded -# database without having to come to us again. +# Locates all possible packages in a directory via a less restricted +# glob. The targeted directory is derived from the name of the +# requested package. I.e. the TM scan will look only at directories +# which can contain the requested package. It will register all +# packages it found in the directory so that future requests have a +# higher chance of being fulfilled by the ifneeded database without +# having to come to us again. # -# We do not remember where we have been and simply rescan targeted directories -# when invoked again. The reasoning is this: +# We do not remember where we have been and simply rescan targeted +# directories when invoked again. The reasoning is this: # -# - The only way we get back to the same directory is if someone is trying to -# [package require] something that wasn't there on the first scan. +# - The only way we get back to the same directory is if someone is +# trying to [package require] something that wasn't there on the +# first scan. # # Either # 1) It is there now: If we rescan, you get it; if not you don't. # -# This covers the possibility that the application asked for a package -# late, and the package was actually added to the installation after the -# application was started. It shoukld still be able to find it. +# This covers the possibility that the application asked for a +# package late, and the package was actually added to the +# installation after the application was started. It shoukld +# still be able to find it. # -# 2) It still is not there: Either way, you don't get it, but the rescan -# takes time. This is however an error case and we dont't care that much -# about it +# 2) It still is not there: Either way, you don't get it, but the +# rescan takes time. This is however an error case and we dont't +# care that much about it # -# 3) It was there the first time; but for some reason a "package forget" has -# been run, and "package" doesn't know about it anymore. +# 3) It was there the first time; but for some reason a "package +# forget" has been run, and "package" doesn't know about it +# anymore. # -# This can be an indication that the application wishes to reload some -# functionality. And should work as well. +# This can be an indication that the application wishes to reload +# some functionality. And should work as well. # -# Note that this also strikes a balance between doing a glob targeting a -# single package, and thus most likely requiring multiple globs of the same -# directory when the application is asking for many packages, and trying to -# glob for _everything_ in all subdirectories when looking for a package, -# which comes with a heavy startup cost. +# Note that this also strikes a balance between doing a glob targeting +# a single package, and thus most likely requiring multiple globs of +# the same directory when the application is asking for many packages, +# and trying to glob for _everything_ in all subdirectories when +# looking for a package, which comes with a heavy startup cost. # # We scan for regular packages only if no satisfying module was found. @@ -67,43 +71,46 @@ namespace eval ::tcl::tm { # path with 'list'. # # Results -# No result for subcommands 'add' and 'remove'. A list of paths for -# 'list'. +# No result for subcommands 'add' and 'remove'. A list of paths +# for 'list'. # # Sideeffects -# The subcommands 'add' and 'remove' manipulate the list of paths to -# search for Tcl Modules. The subcommand 'list' has no sideeffects. +# The subcommands 'add' and 'remove' manipulate the list of +# paths to search for Tcl Modules. The subcommand 'list' has no +# sideeffects. -proc ::tcl::tm::add {args} { +proc ::tcl::tm::add {path args} { # PART OF THE ::tcl::tm::path ENSEMBLE # # The path is added at the head to the list of module paths. # - # The command enforces the restriction that no path may be an ancestor - # directory of any other path on the list. If the new path violates this - # restriction an error wil be raised. + # The command enforces the restriction that no path may be an + # ancestor directory of any other path on the list. If the new + # path violates this restriction an error wil be raised. # - # If the path is already present as is no error will be raised and no - # action will be taken. + # If the path is already present as is no error will be raised and + # no action will be taken. variable paths - # We use a copy of the path as source during validation, and extend it as - # well. Because we not only have to detect if the new paths are bogus with - # respect to the existing paths, but also between themselves. Otherwise we - # can still add bogus paths, by specifying them in a single call. This - # makes the use of the new paths simpler as well, a trivial assignment of - # the collected paths to the official state var. + # We use a copy of the path as source during validation, and + # extend it as well. Because we not only have to detect if the new + # paths are bogus with respect to the existing paths, but also + # between themselves. Otherwise we can still add bogus paths, by + # specifying them in a single call. This makes the use of the new + # paths simpler as well, a trivial assignment of the collected + # paths to the official state var. set newpaths $paths - foreach p $args { + foreach p [linsert $args 0 $path] { if {$p in $newpaths} { # Ignore a path already on the list. continue } - # Search for paths which are subdirectories of the new one. If there - # are any then the new path violates the restriction about ancestors. + # Search for paths which are subdirectories of the new one. If + # there are any then the new path violates the restriction + # about ancestors. set pos [lsearch -glob $newpaths ${p}/*] # Cannot use "in", we need the position for the message. @@ -112,9 +119,10 @@ proc ::tcl::tm::add {args} { "$p is ancestor of existing module path [lindex $newpaths $pos]." } - # Now look for existing paths which are ancestors of the new one. This - # reverse question forces us to loop over the existing paths, as each - # element is the pattern, not the new path :( + # Now look for existing paths which are ancestors of the new + # one. This reverse question forces us to loop over the + # existing paths, as each element is the pattern, not the new + # path :( foreach ep $newpaths { if {[string match ${ep}/* $p]} { @@ -126,23 +134,24 @@ proc ::tcl::tm::add {args} { set newpaths [linsert $newpaths 0 $p] } - # The validation of the input is complete and successful, and everything - # in newpaths is either an old path, or added. We can now extend the - # official list of paths, a simple assignment is sufficient. + # The validation of the input is complete and successful, and + # everything in newpaths is either an old path, or added. We can + # now extend the official list of paths, a simple assignment is + # sufficient. set paths $newpaths return } -proc ::tcl::tm::remove {args} { +proc ::tcl::tm::remove {path args} { # PART OF THE ::tcl::tm::path ENSEMBLE # - # Removes the path from the list of module paths. The command is silently - # ignored if the path is not on the list. + # Removes the path from the list of module paths. The command is + # silently ignored if the path is not on the list. variable paths - foreach p $args { + foreach p [linsert $args 0 $path] { set pos [lsearch -exact $paths $p] if {$pos >= 0} { set paths [lreplace $paths $pos $pos] @@ -168,26 +177,27 @@ proc ::tcl::tm::list {} { # empty string. # exact - Either -exact or ommitted. # -# Name, version, and exact are used to determine satisfaction. The -# original is called iff no satisfaction was achieved. The name is also -# used to compute the directory to target in the search. +# Name, version, and exact are used to determine +# satisfaction. The original is called iff no satisfaction was +# achieved. The name is also used to compute the directory to +# target in the search. # # Results # None. # # Sideeffects -# May populate the package ifneeded database with additional provide -# scripts. +# May populate the package ifneeded database with additional +# provide scripts. proc ::tcl::tm::UnknownHandler {original name args} { # Import the list of paths to search for packages in module form. - # Import the pattern used to check package names in detail. + # Import the pattern used to check package names in detail. variable paths variable pkgpattern - # Without paths to search we can do nothing. (Except falling back to the - # regular search). + # Without paths to search we can do nothing. (Except falling back + # to the regular search). if {[llength $paths]} { set pkgpath [string map {:: /} $name] @@ -196,10 +206,11 @@ proc ::tcl::tm::UnknownHandler {original name args} { set pkgroot "" } - # We don't remember a copy of the paths while looping. Tcl Modules are - # unable to change the list while we are searching for them. This also - # simplifies the loop, as we cannot get additional directories while - # iterating over the list. A simple foreach is sufficient. + # We don't remember a copy of the paths while looping. Tcl + # Modules are unable to change the list while we are searching + # for them. This also simplifies the loop, as we cannot get + # additional directories while iterating over the list. A + # simple foreach is sufficient. set satisfied 0 foreach path $paths { @@ -212,11 +223,12 @@ proc ::tcl::tm::UnknownHandler {original name args} { } set strip [llength [file split $path]] - # We can't use glob in safe interps, so enclose the following in a - # catch statement, where we get the module files out of the - # subdirectories. In other words, Tcl Modules are not-functional - # in such an interpreter. This is the same as for the command - # "tclPkgUnknown", i.e. the search for regular packages. + # We can't use glob in safe interps, so enclose the following + # in a catch statement, where we get the module files out + # of the subdirectories. In other words, Tcl Modules are + # not-functional in such an interpreter. This is the same + # as for the command "tclPkgUnknown", i.e. the search for + # regular packages. catch { # We always look for _all_ possible modules in the current @@ -226,48 +238,48 @@ proc ::tcl::tm::UnknownHandler {original name args} { set pkgfilename [join [lrange [file split $file] $strip end] ::] if {![regexp -- $pkgpattern $pkgfilename --> pkgname pkgversion]} { - # Ignore everything not matching our pattern for - # package names. + # Ignore everything not matching our pattern + # for package names. continue } - try { - package vcompare $pkgversion 0 - } on error {} { - # Ignore everything where the version part is not - # acceptable to "package vcompare". + if {[catch {package vcompare $pkgversion 0}]} { + # Ignore everything where the version part is + # not acceptable to "package vcompare". continue } - # We have found a candidate, generate a "provide script" - # for it, and remember it. Note that we are using ::list - # to do this; locally [list] means something else without - # the namespace specifier. - - # NOTE. When making changes to the format of the provide - # command generated below CHECK that the 'LOCATE' - # procedure in core file 'platform/shell.tcl' still - # understands it, or, if not, update its implementation - # appropriately. + # We have found a candidate, generate a "provide + # script" for it, and remember it. Note that we + # are using ::list to do this; locally [list] + # means something else without the namespace + # specifier. + + # NOTE. When making changes to the format of the + # provide command generated below CHECK that the + # 'LOCATE' procedure in core file + # 'platform/shell.tcl' still understands it, or, + # if not, update its implementation appropriately. # - # Right now LOCATE's implementation assumes that the path - # of the package file is the last element in the list. + # Right now LOCATE's implementation assumes that + # the path of the package file is the last element + # in the list. package ifneeded $pkgname $pkgversion \ "[::list package provide $pkgname $pkgversion];[::list source -encoding utf-8 $file]" - # We abort in this unknown handler only if we got a - # satisfying candidate for the requested package. - # Otherwise we still have to fallback to the regular - # package search to complete the processing. + # We abort in this unknown handler only if we got + # a satisfying candidate for the requested + # package. Otherwise we still have to fallback to + # the regular package search to complete the + # processing. if {($pkgname eq $name) && [package vsatisfies $pkgversion {*}$args]} { set satisfied 1 - - # We do not abort the loop, and keep adding provide - # scripts for every candidate in the directory, just - # remember to not fall back to the regular search - # anymore. + # We do not abort the loop, and keep adding + # provide scripts for every candidate in the + # directory, just remember to not fall back to + # the regular search anymore. } } } @@ -278,8 +290,8 @@ proc ::tcl::tm::UnknownHandler {original name args} { } } - # Fallback to previous command, if existing. See comment above about - # ::list... + # Fallback to previous command, if existing. See comment above + # about ::list... if {[llength $original]} { uplevel 1 $original [::linsert $args 0 $name] @@ -350,17 +362,17 @@ proc ::tcl::tm::roots {paths} { set p [file join $pa tcl$major] for {set n $minor} {$n >= 0} {incr n -1} { set px [file join $p ${major}.${n}] - if {![interp issafe]} {set px [file normalize $px]} + if {![interp issafe]} { set px [file normalize $px] } path add $px } set px [file join $p site-tcl] - if {![interp issafe]} {set px [file normalize $px]} + if {![interp issafe]} { set px [file normalize $px] } path add $px } return } -# Initialization. Set up the default paths, then insert the new handler into -# the chain. +# Initialization. Set up the default paths, then insert the new +# handler into the chain. -if {![interp issafe]} {::tcl::tm::Defaults} +if {![interp issafe]} { ::tcl::tm::Defaults } |