diff options
Diffstat (limited to 'library')
| -rw-r--r-- | library/auto.tcl | 294 | ||||
| -rw-r--r-- | library/clock.tcl | 1116 | ||||
| -rw-r--r-- | library/dde/pkgIndex.tcl | 4 | ||||
| -rw-r--r-- | library/history.tcl | 302 | ||||
| -rw-r--r-- | library/http/http.tcl | 273 | ||||
| -rw-r--r-- | library/http/pkgIndex.tcl | 6 | ||||
| -rw-r--r-- | library/http1.0/http.tcl | 6 | ||||
| -rw-r--r-- | library/init.tcl | 123 | ||||
| -rw-r--r-- | library/opt/optparse.tcl | 474 | ||||
| -rw-r--r-- | library/opt/pkgIndex.tcl | 2 | ||||
| -rw-r--r-- | library/package.tcl | 320 | ||||
| -rwxr-xr-x | library/reg/pkgIndex.tcl | 12 | ||||
| -rw-r--r-- | library/safe.tcl | 100 | ||||
| -rw-r--r-- | library/tclIndex | 20 | ||||
| -rw-r--r-- | library/tm.tcl | 230 |
15 files changed, 1566 insertions, 1716 deletions
diff --git a/library/auto.tcl b/library/auto.tcl index 55fc90f..4bd860d 100644 --- a/library/auto.tcl +++ b/library/auto.tcl @@ -1,47 +1,47 @@ # auto.tcl -- # -# utility procs formerly in init.tcl dealing with auto execution -# of commands and can be auto loaded themselves. +# utility procs formerly in init.tcl dealing with auto execution of commands +# and can be auto loaded themselves. # # Copyright (c) 1991-1993 The Regents of the University of California. # Copyright (c) 1994-1998 Sun Microsystems, Inc. # -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# See the file "license.terms" for information on usage and redistribution of +# this file, and for a DISCLAIMER OF ALL WARRANTIES. # # auto_reset -- # -# Destroy all cached information for auto-loading and auto-execution, -# so that the information gets recomputed the next time it's needed. -# Also delete any commands that are listed in the auto-load index. +# Destroy all cached information for auto-loading and auto-execution, so that +# the information gets recomputed the next time it's needed. Also delete any +# commands that are listed in the auto-load index. # -# Arguments: +# Arguments: # None. proc auto_reset {} { if {[array exists ::auto_index]} { foreach cmdName [array names ::auto_index] { set fqcn [namespace which $cmdName] - if {$fqcn eq ""} {continue} + if {$fqcn eq ""} { + continue + } rename $fqcn {} } } unset -nocomplain ::auto_execs ::auto_index ::tcl::auto_oldpath if {[catch {llength $::auto_path}]} { set ::auto_path [list [info library]] - } else { - if {[info library] ni $::auto_path} { - lappend ::auto_path [info library] - } + } elseif {[info library] ni $::auto_path} { + lappend ::auto_path [info library] } } # tcl_findLibrary -- # # This is a utility for extensions that searches for a library directory -# using a canonical searching algorithm. A side effect is to source -# the initialization script and set a global library variable. +# using a canonical searching algorithm. A side effect is to source the +# initialization script and set a global library variable. # # Arguments: # basename Prefix of the directory name, (e.g., "tk") @@ -63,24 +63,21 @@ proc tcl_findLibrary {basename version patch initScript enVarName varName} { if {[info exists the_library] && $the_library ne ""} { lappend dirs $the_library } else { - # Do the canonical search - # 1. From an environment variable, if it exists. - # Placing this first gives the end-user ultimate control - # to work-around any bugs, or to customize. + # 1. From an environment variable, if it exists. Placing this first + # gives the end-user ultimate control to work-around any bugs, or + # to customize. if {[info exists env($enVarName)]} { lappend dirs $env($enVarName) } - # 2. In the package script directory registered within - # the configuration of the package itself. + # 2. In the package script directory registered within the + # configuration of the package itself. - if {[catch { - ::${basename}::pkgconfig get scriptdir,runtime - } value] == 0} { - lappend dirs $value + catch { + lappend dirs [::${basename}::pkgconfig get scriptdir,runtime] } # 3. Relative to auto_path directories. This checks relative to the @@ -88,8 +85,10 @@ proc tcl_findLibrary {basename version patch initScript enVarName varName} { # auto_path that is not relative to the core library or binary paths. foreach d $::auto_path { lappend dirs [file join $d $basename$version] - if {$::tcl_platform(platform) eq "unix" - && $::tcl_platform(os) eq "Darwin"} { + if { + $::tcl_platform(platform) eq "unix" + && $::tcl_platform(os) eq "Darwin" + } then { # 4. On MacOSX, check the Resources/Scripts subdir too lappend dirs [file join $d $basename$version Resources Scripts] } @@ -100,8 +99,8 @@ proc tcl_findLibrary {basename version patch initScript enVarName varName} { # ../../lib/foo1.0 (From bin/arch directory in install hierarchy) # ../library (From unix directory in build hierarchy) # - # Remaining locations are out of date (when relevant, they ought - # to be covered by the $::auto_path seach above) and disabled. + # Remaining locations are out of date (when relevant, they ought to be + # covered by the $::auto_path seach above) and disabled. # # ../../library (From unix/arch directory in build hierarchy) # ../../foo1.0.1/library @@ -124,17 +123,19 @@ proc tcl_findLibrary {basename version patch initScript enVarName varName} { # uniquify $dirs in order array set seen {} foreach i $dirs { - # Take note that the [file normalize] below has been noted to - # cause difficulties for the freewrap utility. See Bug 1072136. - # Until freewrap resolves the matter, one might work around the - # problem by disabling that branch. + # Take note that the [file normalize] below has been noted to cause + # difficulties for the freewrap utility. See Bug 1072136. Until + # freewrap resolves the matter, one might work around the problem by + # disabling that branch. if {[interp issafe]} { set norm $i } else { set norm [file normalize $i] } - if {[info exists seen($norm)]} { continue } - set seen($norm) "" + if {[info exists seen($norm)]} { + continue + } + set seen($norm) {} lappend uniqdirs $i } set dirs $uniqdirs @@ -142,16 +143,15 @@ proc tcl_findLibrary {basename version patch initScript enVarName varName} { set the_library $i set file [file join $i $initScript] - # source everything when in a safe interpreter because - # we have a source command, but no file exists command + # source everything when in a safe interpreter because we have a + # source command, but no file exists command if {[interp issafe] || [file exists $file]} { if {![catch {uplevel #0 [list source $file]} msg opts]} { return - } else { - append errors "$file: $msg\n" - append errors [dict get $opts -errorinfo]\n } + append errors "$file: $msg\n" + append errors [dict get $opts -errorinfo]\n } } unset -nocomplain the_library @@ -166,28 +166,28 @@ proc tcl_findLibrary {basename version patch initScript enVarName varName} { # ---------------------------------------------------------------------- # auto_mkindex # ---------------------------------------------------------------------- -# The following procedures are used to generate the tclIndex file -# from Tcl source files. They use a special safe interpreter to -# parse Tcl source files, writing out index entries as "proc" -# commands are encountered. This implementation won't work in a -# safe interpreter, since a safe interpreter can't create the -# special parser and mess with its commands. +# The following procedures are used to generate the tclIndex file from Tcl +# source files. They use a special safe interpreter to parse Tcl source +# files, writing out index entries as "proc" commands are encountered. This +# implementation won't work in a safe interpreter, since a safe interpreter +# can't create the special parser and mess with its commands. if {[interp issafe]} { return ;# Stop sourcing the file here } # auto_mkindex -- -# Regenerate a tclIndex file from Tcl source files. Takes as argument -# the name of the directory in which the tclIndex file is to be placed, -# followed by any number of glob patterns to use in that directory to -# locate all of the relevant files. +# Regenerate a tclIndex file from Tcl source files. Takes as argument the +# name of the directory in which the tclIndex file is to be placed, followed +# by any number of glob patterns to use in that directory to locate all of the +# relevant files. # -# Arguments: +# Arguments: # dir - Name of the directory in which to create an index. -# args - Any number of additional arguments giving the -# names of files within dir. If no additional -# are given auto_mkindex will look for *.tcl. + +# args - Any number of additional arguments giving the names of files +# within dir. If no additional are given auto_mkindex will look +# for *.tcl. proc auto_mkindex {dir args} { if {[interp issafe]} { @@ -196,7 +196,6 @@ proc auto_mkindex {dir args} { set oldDir [pwd] cd $dir - set dir [pwd] append index "# Tcl autoload index file, version 2.0\n" append index "# This file is generated by the \"auto_mkindex\" command\n" @@ -205,18 +204,18 @@ proc auto_mkindex {dir args} { append index "# sets an element in the auto_index array, where the\n" append index "# element name is the name of a command and the value is\n" append index "# a script that loads the command.\n\n" - if {[llength $args] == 0} { + if {![llength $args]} { set args *.tcl } auto_mkindex_parser::init foreach file [glob -- {*}$args] { - if {[catch {auto_mkindex_parser::mkindex $file} msg opts] == 0} { - append index $msg - } else { - cd $oldDir + try { + append index [auto_mkindex_parser::mkindex $file] + } on error {msg opts} { + cd $oldDir return -options $opts $msg - } + } } auto_mkindex_parser::cleanup @@ -226,8 +225,8 @@ proc auto_mkindex {dir args} { cd $oldDir } -# Original version of auto_mkindex that just searches the source -# code for "proc" at the beginning of the line. +# Original version of auto_mkindex that just searches the source code for +# "proc" at the beginning of the line. proc auto_mkindex_old {dir args} { set oldDir [pwd] @@ -240,7 +239,7 @@ proc auto_mkindex_old {dir args} { append index "# sets an element in the auto_index array, where the\n" append index "# element name is the name of a command and the value is\n" append index "# a script that loads the command.\n\n" - if {[llength $args] == 0} { + if {![llength $args]} { set args *.tcl } foreach file [glob -- {*}$args] { @@ -278,9 +277,9 @@ proc auto_mkindex_old {dir args} { } # Create a safe interpreter that can be used to parse Tcl source files -# generate a tclIndex file for autoloading. This interp contains -# commands for things that need index entries. Each time a command -# is executed, it writes an entry out to the index file. +# generate a tclIndex file for autoloading. This interp contains commands for +# things that need index entries. Each time a command is executed, it writes +# an entry out to the index file. namespace eval auto_mkindex_parser { variable parser "" ;# parser used to build index @@ -305,7 +304,14 @@ namespace eval auto_mkindex_parser { $parser hide namespace $parser hide eval $parser hide puts - $parser invokehidden namespace delete :: + foreach ns [$parser invokehidden namespace children ::] { + # MUST NOT DELETE "::tcl" OR BAD THINGS HAPPEN! + if {$ns eq "::tcl"} continue + $parser invokehidden namespace delete $ns + } + foreach cmd [$parser invokehidden info commands ::*] { + $parser invokehidden rename $cmd {} + } $parser invokehidden proc unknown {args} {} # We'll need access to the "namespace" command within the @@ -332,12 +338,12 @@ namespace eval auto_mkindex_parser { # auto_mkindex_parser::mkindex -- # -# Used by the "auto_mkindex" command to create a "tclIndex" file for -# the given Tcl source file. Executes the commands in the file, and -# handles things like the "proc" command by adding an entry for the -# index file. Returns a string that represents the index file. +# Used by the "auto_mkindex" command to create a "tclIndex" file for the given +# Tcl source file. Executes the commands in the file, and handles things like +# the "proc" command by adding an entry for the index file. Returns a string +# that represents the index file. # -# Arguments: +# Arguments: # file Name of Tcl source file to be indexed. proc auto_mkindex_parser::mkindex {file} { @@ -353,14 +359,13 @@ proc auto_mkindex_parser::mkindex {file} { set contents [read $fid] close $fid - # There is one problem with sourcing files into the safe - # interpreter: references like "$x" will fail since code is not - # really being executed and variables do not really exist. - # To avoid this, we replace all $ with \0 (literally, the null char) - # later, when getting proc names we will have to reverse this replacement, - # in case there were any $ in the proc name. This will cause a problem - # if somebody actually tries to have a \0 in their proc name. Too bad - # for them. + # There is one problem with sourcing files into the safe interpreter: + # references like "$x" will fail since code is not really being executed + # and variables do not really exist. To avoid this, we replace all $ with + # \0 (literally, the null char) later, when getting proc names we will + # have to reverse this replacement, in case there were any $ in the proc + # name. This will cause a problem if somebody actually tries to have a \0 + # in their proc name. Too bad for them. set contents [string map [list \$ \0] $contents] set index "" @@ -377,10 +382,10 @@ proc auto_mkindex_parser::mkindex {file} { # auto_mkindex_parser::hook command # -# Registers a Tcl command to evaluate when initializing the -# slave interpreter used by the mkindex parser. -# The command is evaluated in the master interpreter, and can -# use the variable auto_mkindex_parser::parser to get to the slave +# Registers a Tcl command to evaluate when initializing the slave interpreter +# used by the mkindex parser. The command is evaluated in the master +# interpreter, and can use the variable auto_mkindex_parser::parser to get to +# the slave proc auto_mkindex_parser::hook {cmd} { variable initCommands @@ -390,30 +395,30 @@ proc auto_mkindex_parser::hook {cmd} { # auto_mkindex_parser::slavehook command # -# Registers a Tcl command to evaluate when initializing the -# slave interpreter used by the mkindex parser. -# The command is evaluated in the slave interpreter. +# Registers a Tcl command to evaluate when initializing the slave interpreter +# used by the mkindex parser. The command is evaluated in the slave +# interpreter. proc auto_mkindex_parser::slavehook {cmd} { variable initCommands - # The $parser variable is defined to be the name of the - # slave interpreter when this command is used later. + # The $parser variable is defined to be the name of the slave interpreter + # when this command is used later. lappend initCommands "\$parser eval [list $cmd]" } # auto_mkindex_parser::command -- # -# Registers a new command with the "auto_mkindex_parser" interpreter -# that parses Tcl files. These commands are fake versions of things -# like the "proc" command. When you execute them, they simply write -# out an entry to a "tclIndex" file for auto-loading. +# Registers a new command with the "auto_mkindex_parser" interpreter that +# parses Tcl files. These commands are fake versions of things like the +# "proc" command. When you execute them, they simply write out an entry to a +# "tclIndex" file for auto-loading. # -# This procedure allows extensions to register their own commands -# with the auto_mkindex facility. For example, a package like -# [incr Tcl] might register a "class" command so that class definitions -# could be added to a "tclIndex" file for auto-loading. +# This procedure allows extensions to register their own commands with the +# auto_mkindex facility. For example, a package like [incr Tcl] might +# register a "class" command so that class definitions could be added to a +# "tclIndex" file for auto-loading. # # Arguments: # name Name of command recognized in Tcl files. @@ -426,8 +431,8 @@ proc auto_mkindex_parser::command {name arglist body} { # auto_mkindex_parser::commandInit -- # -# This does the actual work set up by auto_mkindex_parser::command -# This is called when the interpreter used by the parser is created. +# This does the actual work set up by auto_mkindex_parser::command. This is +# called when the interpreter used by the parser is created. # # Arguments: # name Name of command recognized in Tcl files. @@ -446,25 +451,23 @@ proc auto_mkindex_parser::commandInit {name arglist body} { } proc $fakeName $arglist $body - # YUK! Tcl won't let us alias fully qualified command names, - # so we can't handle names like "::itcl::class". Instead, - # we have to build procs with the fully qualified names, and - # have the procs point to the aliases. + # YUK! Tcl won't let us alias fully qualified command names, so we can't + # handle names like "::itcl::class". Instead, we have to build procs with + # the fully qualified names, and have the procs point to the aliases. if {[string match *::* $name]} { set exportCmd [list _%@namespace export [namespace tail $name]] $parser eval [list _%@namespace eval $ns $exportCmd] - - # The following proc definition does not work if you - # want to tolerate space or something else diabolical - # in the procedure name, (i.e., space in $alias) - # The following does not work: + + # The following proc definition does not work if you want to tolerate + # space or something else diabolical in the procedure name, (i.e., + # space in $alias). The following does not work: # "_%@eval {$alias} \$args" - # because $alias gets concat'ed to $args. - # The following does not work because $cmd is somehow undefined + # because $alias gets concat'ed to $args. The following does not work + # because $cmd is somehow undefined # "set cmd {$alias} \; _%@eval {\$cmd} \$args" - # A gold star to someone that can make test - # autoMkindex-3.3 work properly + # A gold star to someone that can make test autoMkindex-3.3 work + # properly set alias [namespace tail $fakeName] $parser invokehidden proc $name {args} "_%@eval {$alias} \$args" @@ -476,15 +479,14 @@ proc auto_mkindex_parser::commandInit {name arglist body} { } # auto_mkindex_parser::fullname -- -# Used by commands like "proc" within the auto_mkindex parser. -# Returns the qualified namespace name for the "name" argument. -# If the "name" does not start with "::", elements are added from -# the current namespace stack to produce a qualified name. Then, -# the name is examined to see whether or not it should really be -# qualified. If the name has more than the leading "::", it is -# returned as a fully qualified name. Otherwise, it is returned -# as a simple name. That way, the Tcl autoloader will recognize -# it properly. +# +# Used by commands like "proc" within the auto_mkindex parser. Returns the +# qualified namespace name for the "name" argument. If the "name" does not +# start with "::", elements are added from the current namespace stack to +# produce a qualified name. Then, the name is examined to see whether or not +# it should really be qualified. If the name has more than the leading "::", +# it is returned as a fully qualified name. Otherwise, it is returned as a +# simple name. That way, the Tcl autoloader will recognize it properly. # # Arguments: # name - Name that is being added to index. @@ -507,8 +509,8 @@ proc auto_mkindex_parser::fullname {name} { set name "::$name" } - # Earlier, mkindex replaced all $'s with \0. Now, we have to reverse - # that replacement. + # Earlier, mkindex replaced all $'s with \0. Now, we have to reverse that + # replacement. return [string map [list \0 \$] $name] } @@ -516,8 +518,8 @@ if {[llength $::auto_mkindex_parser::initCommands]} { return } -# Register all of the procedures for the auto_mkindex parser that -# will build the "tclIndex" file. +# Register all of the procedures for the auto_mkindex parser that will build +# the "tclIndex" file. # AUTO MKINDEX: proc name arglist body # Adds an entry to the auto index list for the given procedure name. @@ -527,24 +529,27 @@ auto_mkindex_parser::command proc {name args} { variable scriptFile # Do some fancy reformatting on the "source" call to handle platform # differences with respect to pathnames. Use format just so that the - # command is a little easier to read (otherwise it'd be full of + # command is a little easier to read (otherwise it'd be full of # backslashed dollar signs, etc. append index [list set auto_index([fullname $name])] \ [format { [list source [file join $dir %s]]} \ [file split $scriptFile]] "\n" } -# Conditionally add support for Tcl byte code files. There are some -# tricky details here. First, we need to get the tbcload library -# initialized in the current interpreter. We cannot load tbcload into the -# slave until we have done so because it needs access to the tcl_patchLevel -# variable. Second, because the package index file may defer loading the -# library until we invoke a command, we need to explicitly invoke auto_load -# to force it to be loaded. This should be a noop if the package has -# already been loaded +# Conditionally add support for Tcl byte code files. There are some tricky +# details here. First, we need to get the tbcload library initialized in the +# current interpreter. We cannot load tbcload into the slave until we have +# done so because it needs access to the tcl_patchLevel variable. Second, +# because the package index file may defer loading the library until we invoke +# a command, we need to explicitly invoke auto_load to force it to be loaded. +# This should be a noop if the package has already been loaded auto_mkindex_parser::hook { - if {![catch {package require tbcload}]} { + try { + package require tbcload + } on error {} { + # OK, don't have it so do nothing + } on ok {} { if {[namespace which -command tbcload::bcproc] eq ""} { auto_load tbcload::bcproc } @@ -552,7 +557,7 @@ auto_mkindex_parser::hook { # AUTO MKINDEX: tbcload::bcproc name arglist body # Adds an entry to the auto index list for the given pre-compiled - # procedure name. + # procedure name. auto_mkindex_parser::commandInit tbcload::bcproc {name args} { variable index @@ -568,16 +573,15 @@ auto_mkindex_parser::hook { } # AUTO MKINDEX: namespace eval name command ?arg arg...? -# Adds the namespace name onto the context stack and evaluates the -# associated body of commands. +# Adds the namespace name onto the context stack and evaluates the associated +# body of commands. # # AUTO MKINDEX: namespace import ?-force? pattern ?pattern...? -# Performs the "import" action in the parser interpreter. This is -# important for any commands contained in a namespace that affect -# the index. For example, a script may say "itcl::class ...", -# or it may import "itcl::*" and then say "class ...". This -# procedure does the import operation, but keeps track of imported -# patterns so we can remove the imports later. +# Performs the "import" action in the parser interpreter. This is important +# for any commands contained in a namespace that affect the index. For +# example, a script may say "itcl::class ...", or it may import "itcl::*" and +# then say "class ...". This procedure does the import operation, but keeps +# track of imported patterns so we can remove the imports later. auto_mkindex_parser::command namespace {op args} { switch -- $op { diff --git a/library/clock.tcl b/library/clock.tcl index 32911b3..0696c47 100644 --- a/library/clock.tcl +++ b/library/clock.tcl @@ -2,9 +2,9 @@ # # clock.tcl -- # -# This file implements the portions of the [clock] ensemble that -# are coded in Tcl. Refer to the users' manual to see the description -# of the [clock] command and its subcommands. +# This file implements the portions of the [clock] ensemble that are +# coded in Tcl. Refer to the users' manual to see the description of +# the [clock] command and its subcommands. # # #---------------------------------------------------------------------- @@ -15,8 +15,8 @@ # #---------------------------------------------------------------------- -# We must have message catalogs that support the root locale, and -# we need access to the Registry on Windows systems. +# We must have message catalogs that support the root locale, and we need +# access to the Registry on Windows systems. uplevel \#0 { package require msgcat 1.4 @@ -27,9 +27,8 @@ uplevel \#0 { } } -# Put the library directory into the namespace for the ensemble -# so that the library code can find message catalogs and time zone -# definition files. +# Put the library directory into the namespace for the ensemble so that the +# library code can find message catalogs and time zone definition files. namespace eval ::tcl::clock \ [list variable LibDir [file dirname [info script]]] @@ -40,10 +39,10 @@ namespace eval ::tcl::clock \ # # Manipulate times. # -# The 'clock' command manipulates time. Refer to the user documentation -# for the available subcommands and what they do. +# The 'clock' command manipulates time. Refer to the user documentation for +# the available subcommands and what they do. # -#---------------------------------------------------------------------- +#---------------------------------------------------------------------- namespace eval ::tcl::clock { @@ -76,11 +75,11 @@ namespace eval ::tcl::clock { # Side effects: # Namespace variable in the 'clock' subsystem are initialized. # -# The '::tcl::clock::Initialize' procedure initializes the namespace -# variables and root locale message catalog for the 'clock' subsystem. -# It is broken into a procedure rather than simply evaluated as a script -# so that it will be able to use local variables, avoiding the dangers -# of 'creative writing' as in Bug 1185933. +# The '::tcl::clock::Initialize' procedure initializes the namespace variables +# and root locale message catalog for the 'clock' subsystem. It is broken +# into a procedure rather than simply evaluated as a script so that it will be +# able to use local variables, avoiding the dangers of 'creative writing' as +# in Bug 1185933. # #---------------------------------------------------------------------- @@ -172,8 +171,8 @@ proc ::tcl::clock::Initialize {} { ::msgcat::mcset fr GREGORIAN_CHANGE_DATE 2299227 - # For Belgium, we follow Southern Netherlands; Liege Diocese - # changed several weeks later. + # For Belgium, we follow Southern Netherlands; Liege Diocese changed + # several weeks later. ::msgcat::mcset fr_BE GREGORIAN_CHANGE_DATE 2299238 ::msgcat::mcset nl_BE GREGORIAN_CHANGE_DATE 2299238 @@ -189,13 +188,13 @@ proc ::tcl::clock::Initialize {} { # Germany, Norway, Denmark (Catholic Germany changed earlier) ::msgcat::mcset de_DE GREGORIAN_CHANGE_DATE 2342032 - ::msgcat::mcset nb GREGORIAN_CHANGE_DATE 2342032 + ::msgcat::mcset nb GREGORIAN_CHANGE_DATE 2342032 ::msgcat::mcset nn GREGORIAN_CHANGE_DATE 2342032 ::msgcat::mcset no GREGORIAN_CHANGE_DATE 2342032 ::msgcat::mcset da GREGORIAN_CHANGE_DATE 2342032 - # Holland (Brabant, Gelderland, Flanders, Friesland, etc. changed - # at various times) + # Holland (Brabant, Gelderland, Flanders, Friesland, etc. changed at + # various times) ::msgcat::mcset nl GREGORIAN_CHANGE_DATE 2342165 @@ -217,23 +216,23 @@ proc ::tcl::clock::Initialize {} { ::msgcat::mcset ru GREGORIAN_CHANGE_DATE 2421639 - # Romania (Transylvania changed earler - perhaps de_RO should show - # the earlier date?) + # Romania (Transylvania changed earler - perhaps de_RO should show the + # earlier date?) ::msgcat::mcset ro GREGORIAN_CHANGE_DATE 2422063 # Greece ::msgcat::mcset el GREGORIAN_CHANGE_DATE 2423480 - + #------------------------------------------------------------------ # # CONSTANTS # #------------------------------------------------------------------ - # Paths at which binary time zone data for the Olson libraries - # are known to reside on various operating systems + # Paths at which binary time zone data for the Olson libraries are known + # to reside on various operating systems variable ZoneinfoPaths {} foreach path { @@ -282,10 +281,10 @@ proc ::tcl::clock::Initialize {} { variable FEB_28 58 - # Translation table to map Windows TZI onto cities, so that - # the Olson rules can apply. In some cases the mapping is ambiguous, - # so it's wise to specify $::env(TCL_TZ) rather than simply depending - # on the system time zone. + # Translation table to map Windows TZI onto cities, so that the Olson + # rules can apply. In some cases the mapping is ambiguous, so it's wise + # to specify $::env(TCL_TZ) rather than simply depending on the system + # time zone. # The keys are long lists of values obtained from the time zone # information in the Registry. In order, the list elements are: @@ -296,10 +295,10 @@ proc ::tcl::clock::Initialize {} { # DaylightDate.wYear DaylightDate.wMonth DaylightDate.wDayOfWeek # DaylightDate.wDay DaylightDate.wHour DaylightDate.wMinute # DaylightDate.wSecond DaylightDate.wMilliseconds - # The values are the names of time zones where those rules apply. - # There is considerable ambiguity in certain zones; an attempt has - # been made to make a reasonable guess, but this table needs to be - # taken with a grain of salt. + # The values are the names of time zones where those rules apply. There + # is considerable ambiguity in certain zones; an attempt has been made to + # make a reasonable guess, but this table needs to be taken with a grain + # of salt. variable WinZoneInfo [dict create {*}{ {-43200 0 3600 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0} :Pacific/Kwajalein @@ -378,10 +377,10 @@ proc ::tcl::clock::Initialize {} { {46800 0 3600 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0} :Pacific/Tongatapu }] - # Groups of fields that specify the date, priorities, and - # code bursts that determine Julian Day Number given those groups. - # The code in [clock scan] will choose the highest priority - # (lowest numbered) set of fields that determines the date. + # Groups of fields that specify the date, priorities, and code bursts that + # determine Julian Day Number given those groups. The code in [clock + # scan] will choose the highest priority (lowest numbered) set of fields + # that determines the date. variable DateParseActions { @@ -485,8 +484,8 @@ proc ::tcl::clock::Initialize {} { } } - # Groups of fields that specify time of day, priorities, - # and code that processes them + # Groups of fields that specify time of day, priorities, and code that + # processes them variable TimeParseActions { @@ -652,16 +651,14 @@ proc ::tcl::clock::Initialize {} { # # clock format -- # -# Formats a count of seconds since the Posix Epoch as a time -# of day. +# Formats a count of seconds since the Posix Epoch as a time of day. # -# The 'clock format' command formats times of day for output. -# Refer to the user documentation to see what it does. +# The 'clock format' command formats times of day for output. Refer to the +# user documentation to see what it does. # #---------------------------------------------------------------------- proc ::tcl::clock::format { args } { - variable FormatProc variable TZData @@ -670,7 +667,7 @@ proc ::tcl::clock::format { args } { set clockval [lindex $args 0] # Get the data for time changes in the given zone - + if {$timezone eq ""} { set timezone [GetSystemTimeZone] } @@ -680,11 +677,11 @@ proc ::tcl::clock::format { args } { return -options $opts $retval } } - - # Build a procedure to format the result. Cache the built procedure's - # name in the 'FormatProc' array to avoid losing its internal - # representation, which contains the name resolution. - + + # Build a procedure to format the result. Cache the built procedure's name + # in the 'FormatProc' array to avoid losing its internal representation, + # which contains the name resolution. + set procName formatproc'$format'$locale set procName [namespace current]::[string map {: {\:} \\ {\\}} $procName] if {[info exists FormatProc($procName)]} { @@ -693,9 +690,8 @@ proc ::tcl::clock::format { args } { set FormatProc($procName) \ [ParseClockFormatFormat $procName $format $locale] } - - return [$procName $clockval $timezone] + return [$procName $clockval $timezone] } #---------------------------------------------------------------------- @@ -714,45 +710,31 @@ proc ::tcl::clock::format { args } { #---------------------------------------------------------------------- proc ::tcl::clock::ParseClockFormatFormat {procName format locale} { - if {[namespace which $procName] ne {}} { return $procName } # Map away the locale-dependent composite format groups - + EnterLocale $locale oldLocale # Change locale if a fresh locale has been given on the command line. - set status [catch { - - ParseClockFormatFormat2 $format $locale $procName - - } result opts] - - # Restore the locale - - if { [info exists oldLocale] } { - mclocale $oldLocale - } - - # Return either the error or the proc name + try { + return [ParseClockFormatFormat2 $format $locale $procName] + } trap CLOCK {result opts} { + dict unset opts -errorinfo + return -options $opts $result + } finally { + # Restore the locale - if { $status == 1 } { - if { [lindex [dict get $opts -errorcode] 0] eq {clock} } { - return -code error $result - } else { - return -options $opts $result + if { [info exists oldLocale] } { + mclocale $oldLocale } - } else { - return $result } - } proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { - set didLocaleEra 0 set didLocaleNumerals 0 set preFormatCode \ @@ -767,7 +749,7 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { set formatString {} set substituents {} set state {} - + set format [LocalizeFormat $locale $format] foreach char [split $format {}] { @@ -794,7 +776,7 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { { [lindex @DAYS_OF_WEEK_ABBREV@ \ [expr {[dict get $date dayOfWeek] \ % 7}]]}] - } + } A { # Day of week, spelt out. append formatString %s append substituents \ @@ -895,7 +877,7 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { k { # Hour (0-23), no leading zero append formatString %2d append substituents \ - { [expr { [dict get $date localSeconds] + { [expr { [dict get $date localSeconds] / 3600 % 24 }]} } @@ -916,7 +898,7 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { M { # Minute of the hour, leading zero append formatString %02d append substituents \ - { [expr { [dict get $date localSeconds] + { [expr { [dict get $date localSeconds] / 60 % 60 }]} } @@ -957,7 +939,7 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { { [expr {(([dict get $date localSeconds] % 86400) < 43200) ? $am : $pm}]} - + } Q { # Hi, Jeff! append formatString %s @@ -967,11 +949,11 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { append formatString %s append substituents { [dict get $date seconds]} } - S { # Second of the minute, with + S { # Second of the minute, with # leading zero append formatString %02d append substituents \ - { [expr { [dict get $date localSeconds] + { [expr { [dict get $date localSeconds] % 60 }]} } t { # A literal tab character @@ -992,7 +974,7 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { } incr dow set UweekNumber \ - [expr { ( [dict get $date dayOfYear] + [expr { ( [dict get $date dayOfYear] - $dow + 7 ) / 7 }] } @@ -1015,7 +997,7 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { set WweekNumber \ [expr { ( [dict get $date dayOfYear] - [dict get $date dayOfWeek] - + 7 ) + + 7 ) / 7 }] } append formatString %02d @@ -1084,7 +1066,7 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { percentO { # Character following %O set state {} switch -exact -- $char { - d - e { # Day of the month in alternative + d - e { # Day of the month in alternative # numerals append formatString %s append substituents \ @@ -1096,7 +1078,7 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { append formatString %s append substituents \ { [lindex $localeNumerals \ - [expr { [dict get $date localSeconds] + [expr { [dict get $date localSeconds] / 3600 % 24 }]]} } @@ -1122,7 +1104,7 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { append formatString %s append substituents \ { [lindex $localeNumerals \ - [expr { [dict get $date localSeconds] + [expr { [dict get $date localSeconds] / 60 % 60 }]]} } @@ -1131,7 +1113,7 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { append formatString %s append substituents \ { [lindex $localeNumerals \ - [expr { [dict get $date localSeconds] + [expr { [dict get $date localSeconds] % 60 }]]} } u { # Day of the week (Monday=1,Sunday=7) @@ -1162,9 +1144,9 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { } } } - + # Clean up any improperly terminated groups - + switch -exact -- $state { percent { append formatString %% @@ -1191,16 +1173,14 @@ proc ::tcl::clock::ParseClockFormatFormat2 {format locale procName} { # # clock scan -- # -# Inputs a count of seconds since the Posix Epoch as a time -# of day. +# Inputs a count of seconds since the Posix Epoch as a time of day. # -# The 'clock format' command scans times of day on input. -# Refer to the user documentation to see what it does. +# The 'clock format' command scans times of day on input. Refer to the user +# documentation to see what it does. # #---------------------------------------------------------------------- proc ::tcl::clock::scan { args } { - set format {} # Check the count of args @@ -1262,21 +1242,17 @@ proc ::tcl::clock::scan { args } { "cannot use -gmt and -timezone in same call" } if { [catch { expr { wide($base) } } result] } { - return -code error \ - "expected integer but got \"$base\"" + return -code error "expected integer but got \"$base\"" } - if { ![string is boolean $gmt] } { - return -code error \ - "expected boolean value but got \"$gmt\"" - } else { - if { $gmt } { - set timezone :GMT - } + if { ![string is boolean -strict $gmt] } { + return -code error "expected boolean value but got \"$gmt\"" + } elseif { $gmt } { + set timezone :GMT } if { ![info exists saw(-format)] } { - # Perhaps someday we'll localize the legacy code. Right now, - # it's not localized. + # Perhaps someday we'll localize the legacy code. Right now, it's not + # localized. if { [info exists saw(-locale)] } { return -code error \ -errorcode [list CLOCK flagWithLegacyFormat] \ @@ -1290,31 +1266,23 @@ proc ::tcl::clock::scan { args } { EnterLocale $locale oldLocale - set status [catch { - + try { # Map away the locale-dependent composite format groups set scanner [ParseClockScanFormat $format $locale] - $scanner $string $base $timezone - - } result opts] - - # Restore the locale + return [$scanner $string $base $timezone] + } trap CLOCK {result opts} { + # Conceal location of generation of expected errors - if { [info exists oldLocale] } { - mclocale $oldLocale - } + dict unset opts -errorinfo + return -options $opts $result + } finally { + # Restore the locale - if { $status == 1 } { - if { [lindex [dict get $opts -errorcode] 0] eq {clock} } { - return -code error $result - } else { - return -options $opts $result + if { [info exists oldLocale] } { + mclocale $oldLocale } - } else { - return $result } - } #---------------------------------------------------------------------- @@ -1330,52 +1298,50 @@ proc ::tcl::clock::scan { args } { # locale - (Unused) Name of the locale where the time will be scanned. # # Results: -# Returns the date and time extracted from the string in seconds -# from the epoch +# Returns the date and time extracted from the string in seconds from +# the epoch # #---------------------------------------------------------------------- proc ::tcl::clock::FreeScan { string base timezone locale } { - variable TZData # Get the data for time changes in the given zone - - if {[catch {SetupTimeZone $timezone} retval opts]} { + + try { + SetupTimeZone $timezone + } on error {retval opts} { dict unset opts -errorinfo return -options $opts $retval } - # Extract year, month and day from the base time for the - # parser to use as defaults - - set date [GetDateFields \ - $base \ - $TZData($timezone) \ - 2361222] - dict set date secondOfDay [expr { [dict get $date localSeconds] - % 86400 }] + # Extract year, month and day from the base time for the parser to use as + # defaults - # Parse the date. The parser will return a list comprising - # date, time, time zone, relative month/day/seconds, relative - # weekday, ordinal month. + set date [GetDateFields $base $TZData($timezone) 2361222] + dict set date secondOfDay [expr { + [dict get $date localSeconds] % 86400 + }] - set status [catch { - Oldscan $string \ - [dict get $date year] \ - [dict get $date month] \ - [dict get $date dayOfMonth] - } result] - if { $status != 0 } { - return -code error "unable to convert date-time string \"$string\": $result" + # Parse the date. The parser will return a list comprising date, time, + # time zone, relative month/day/seconds, relative weekday, ordinal month. + + try { + set scanned [Oldscan $string \ + [dict get $date year] \ + [dict get $date month] \ + [dict get $date dayOfMonth]] + lassign $scanned \ + parseDate parseTime parseZone parseRel \ + parseWeekday parseOrdinalMonth + } on error message { + return -code error \ + "unable to convert date-time string \"$string\": $message" } - lassign $result parseDate parseTime parseZone parseRel \ - parseWeekday parseOrdinalMonth - - # If the caller supplied a date in the string, update the 'date' dict - # with the value. If the caller didn't specify a time with the date, - # default to midnight. + # If the caller supplied a date in the string, update the 'date' dict with + # the value. If the caller didn't specify a time with the date, default to + # midnight. if { [llength $parseDate] > 0 } { lassign $parseDate y m d @@ -1395,12 +1361,12 @@ proc ::tcl::clock::FreeScan { string base timezone locale } { } } - # If the caller supplied a time zone in the string, it comes back - # as a two-element list; the first element is the number of minutes - # east of Greenwich, and the second is a Daylight Saving Time - # indicator ( 1 == yes, 0 == no, -1 == unknown ). We make it into - # a time zone indicator of +-hhmm. - + # If the caller supplied a time zone in the string, it comes back as a + # two-element list; the first element is the number of minutes east of + # Greenwich, and the second is a Daylight Saving Time indicator (1 == yes, + # 0 == no, -1 == unknown). We make it into a time zone indicator of + # +-hhmm. + if { [llength $parseZone] > 0 } { lassign $parseZone minEast dstFlag set timezone [FormatNumericTimeZone \ @@ -1414,18 +1380,19 @@ proc ::tcl::clock::FreeScan { string base timezone locale } { set date [GetJulianDayFromEraYearMonthDay $date[set date {}] 2361222] if { $parseTime ne {} } { dict set date secondOfDay $parseTime - } elseif { [llength $parseWeekday] != 0 - || [llength $parseOrdinalMonth] != 0 - || ( [llength $parseRel] != 0 + } elseif { [llength $parseWeekday] != 0 + || [llength $parseOrdinalMonth] != 0 + || ( [llength $parseRel] != 0 && ( [lindex $parseRel 0] != 0 || [lindex $parseRel 1] != 0 ) ) } { dict set date secondOfDay 0 } - dict set date localSeconds \ - [expr { -210866803200 - + ( 86400 * wide([dict get $date julianDay]) ) - + [dict get $date secondOfDay] }] + dict set date localSeconds [expr { + -210866803200 + + ( 86400 * wide([dict get $date julianDay]) ) + + [dict get $date secondOfDay] + }] dict set date tzName $timezone set date [ConvertLocalToUTC $date[set date {}] $TZData($timezone) 2361222] set seconds [dict get $date seconds] @@ -1437,18 +1404,17 @@ proc ::tcl::clock::FreeScan { string base timezone locale } { set seconds [add $seconds \ $relMonth months $relDay days $relSecond seconds \ -timezone $timezone -locale $locale] - } + } # Do relative weekday - - if { [llength $parseWeekday] > 0 } { + if { [llength $parseWeekday] > 0 } { lassign $parseWeekday dayOrdinal dayOfWeek set date2 [GetDateFields $seconds $TZData($timezone) 2361222] dict set date2 era CE - set jdwkday [WeekdayOnOrBefore $dayOfWeek \ - [expr { [dict get $date2 julianDay] - + 6 }]] + set jdwkday [WeekdayOnOrBefore $dayOfWeek [expr { + [dict get $date2 julianDay] + 6 + }]] incr jdwkday [expr { 7 * $dayOrdinal }] if { $dayOrdinal > 0 } { incr jdwkday -7 @@ -1456,21 +1422,20 @@ proc ::tcl::clock::FreeScan { string base timezone locale } { dict set date2 secondOfDay \ [expr { [dict get $date2 localSeconds] % 86400 }] dict set date2 julianDay $jdwkday - dict set date2 localSeconds \ - [expr { -210866803200 - + ( 86400 * wide([dict get $date2 julianDay]) ) - + [dict get $date secondOfDay] }] + dict set date2 localSeconds [expr { + -210866803200 + + ( 86400 * wide([dict get $date2 julianDay]) ) + + [dict get $date secondOfDay] + }] dict set date2 tzName $timezone set date2 [ConvertLocalToUTC $date2[set date2 {}] $TZData($timezone) \ 2361222] set seconds [dict get $date2 seconds] - } # Do relative month if { [llength $parseOrdinalMonth] > 0 } { - lassign $parseOrdinalMonth monthOrdinal monthNumber if { $monthOrdinal > 0 } { set monthDiff [expr { $monthNumber - [dict get $date month] }] @@ -1487,7 +1452,6 @@ proc ::tcl::clock::FreeScan { string base timezone locale } { } set seconds [add $seconds $monthOrdinal years $monthDiff months \ -timezone $timezone -locale $locale] - } return $seconds @@ -1505,30 +1469,27 @@ proc ::tcl::clock::FreeScan { string base timezone locale } { # locale - The current locale # # Results: -# Constructs and returns a procedure that accepts the -# string being scanned, the base time, and the time zone. -# The procedure will either return the scanned time or -# else throw an error that should be rethrown to the caller -# of [clock scan] +# Constructs and returns a procedure that accepts the string being +# scanned, the base time, and the time zone. The procedure will either +# return the scanned time or else throw an error that should be rethrown +# to the caller of [clock scan] # # Side effects: -# The given procedure is defined in the ::tcl::clock -# namespace. Scan procedures are not deleted once installed. -# -# Why do we parse dates by defining a procedure to parse them? -# The reason is that by doing so, we have one convenient place to -# cache all the information: the regular expressions that match the -# patterns (which will be compiled), the code that assembles the -# date information, everything lands in one place. In this way, -# when a given format is reused at run time, all the information +# The given procedure is defined in the ::tcl::clock namespace. Scan +# procedures are not deleted once installed. +# +# Why do we parse dates by defining a procedure to parse them? The reason is +# that by doing so, we have one convenient place to cache all the information: +# the regular expressions that match the patterns (which will be compiled), +# the code that assembles the date information, everything lands in one place. +# In this way, when a given format is reused at run time, all the information # of how to apply it is available in a single place. # #---------------------------------------------------------------------- proc ::tcl::clock::ParseClockScanFormat {formatString locale} { - - # Check whether the format has been parsed previously, and return - # the existing recognizer if it has. + # Check whether the format has been parsed previously, and return the + # existing recognizer if it has. set procName scanproc'$formatString'$locale set procName [namespace current]::[string map {: {\:} \\ {\\}} $procName] @@ -1572,8 +1533,8 @@ proc ::tcl::clock::ParseClockScanFormat {formatString locale} { append re {[[:space:]]+} } else { if { ! [string is alnum $c] } { - append re \\ - } + append re "\\" + } append re $c } } @@ -1690,7 +1651,7 @@ proc ::tcl::clock::ParseClockScanFormat {formatString locale} { "::scan \$field" [incr captureCount] " %ld" \ "\]\n" } - m - N { # Month number + m - N { # Month number append re \\s*(\\d\\d?) dict set fieldSet month [incr fieldCount] append postcode "dict set date month \[" \ @@ -1733,10 +1694,9 @@ proc ::tcl::clock::ParseClockScanFormat {formatString locale} { \] \n } s { # Seconds from Posix Epoch - # This next case is insanely difficult, - # because it's problematic to determine - # whether the field is actually within - # the range of a wide integer. + # This next case is insanely difficult, because it's + # problematic to determine whether the field is + # actually within the range of a wide integer. append re {\s*([-+]?\d+)} dict set fieldSet seconds [incr fieldCount] append postcode {dict set date seconds } \[ \ @@ -1769,14 +1729,13 @@ proc ::tcl::clock::ParseClockScanFormat {formatString locale} { dict set date dayOfWeek $dow } } - U { # Week of year. The - # first Sunday of the year is the - # first day of week 01. No scan rule - # uses this group. + U { # Week of year. The first Sunday of + # the year is the first day of week + # 01. No scan rule uses this group. append re \\s*\\d\\d? } V { # Week of ISO8601 year - + append re \\s*(\\d\\d?) dict set fieldSet iso8601Week [incr fieldCount] append postcode "dict set date iso8601Week \[" \ @@ -1948,7 +1907,7 @@ proc ::tcl::clock::ParseClockScanFormat {formatString locale} { "day of week is greater than 7" } dict set date dayOfWeek $dow - } + } } y { lassign [LocaleNumeralMatcher $locale] regex lookup @@ -1994,10 +1953,11 @@ proc ::tcl::clock::ParseClockScanFormat {formatString locale} { append procBody $postcode append procBody [list set changeover [mc GREGORIAN_CHANGE_DATE]] \n - # Get time zone if needed + # Set up the time zone before doing anything with a default base date + # that might need a timezone to interpret it. - if { ![dict exists $fieldSet seconds] - && ![dict exists $fieldSet starDate] } { + if { ![dict exists $fieldSet seconds] + && ![dict exists $fieldSet starDate] } { if { [dict exists $fieldSet tzName] } { append procBody { set timeZone [dict get $date tzName] @@ -2016,24 +1976,29 @@ proc ::tcl::clock::ParseClockScanFormat {formatString locale} { append procBody [MakeParseCodeFromFields $fieldSet $TimeParseActions] - # Assemble seconds, and convert local nominal time to UTC. + # Assemble seconds from the Julian day and second of the day. + # Convert to local time unless epoch seconds or stardate are + # being processed - they're always absolute - if { ![dict exists $fieldSet seconds] + if { ![dict exists $fieldSet seconds] && ![dict exists $fieldSet starDate] } { append procBody { if { [dict get $date julianDay] > 5373484 } { return -code error -errorcode [list CLOCK dateTooLarge] \ "requested date too large to represent" } - dict set date localSeconds \ - [expr { -210866803200 - + ( 86400 * wide([dict get $date julianDay]) ) - + [dict get $date secondOfDay] }] + dict set date localSeconds [expr { + -210866803200 + + ( 86400 * wide([dict get $date julianDay]) ) + + [dict get $date secondOfDay] + }] } + + # Finally, convert the date to local time + append procBody { set date [::tcl::clock::ConvertLocalToUTC $date[set date {}] \ - $TZData($timeZone) \ - $changeover] + $TZData($timeZone) $changeover] } } @@ -2047,20 +2012,19 @@ proc ::tcl::clock::ParseClockScanFormat {formatString locale} { return $procName } - + #---------------------------------------------------------------------- # # LocaleNumeralMatcher -- # -# Composes a regexp that captures the numerals in the given -# locale, and a dictionary to map them to conventional numerals. +# Composes a regexp that captures the numerals in the given locale, and +# a dictionary to map them to conventional numerals. # # Parameters: # locale - Name of the current locale # # Results: -# Returns a two-element list comprising the regexp and the -# dictionary. +# Returns a two-element list comprising the regexp and the dictionary. # # Side effects: # Caches the result. @@ -2068,7 +2032,6 @@ proc ::tcl::clock::ParseClockScanFormat {formatString locale} { #---------------------------------------------------------------------- proc ::tcl::clock::LocaleNumeralMatcher {l} { - variable LocaleNumeralCache if { ![dict exists $LocaleNumeralCache $l] } { @@ -2087,16 +2050,16 @@ proc ::tcl::clock::LocaleNumeralMatcher {l} { } return [dict get $LocaleNumeralCache $l] } - + #---------------------------------------------------------------------- # # UniquePrefixRegexp -- # -# Composes a regexp that performs unique-prefix matching. The -# RE matches one of a supplied set of strings, or any unique -# prefix thereof. +# Composes a regexp that performs unique-prefix matching. The RE +# matches one of a supplied set of strings, or any unique prefix +# thereof. # # Parameters: # data - List of alternating match-strings and values. @@ -2104,10 +2067,10 @@ proc ::tcl::clock::LocaleNumeralMatcher {l} { # distinct. # # Results: -# Returns a two-element list. The first is a regexp that -# matches any unique prefix of any of the strings. The second -# is a dictionary whose keys are match values from the regexp -# and whose values are the corresponding values from 'data'. +# Returns a two-element list. The first is a regexp that matches any +# unique prefix of any of the strings. The second is a dictionary whose +# keys are match values from the regexp and whose values are the +# corresponding values from 'data'. # # Side effects: # None. @@ -2115,11 +2078,10 @@ proc ::tcl::clock::LocaleNumeralMatcher {l} { #---------------------------------------------------------------------- proc ::tcl::clock::UniquePrefixRegexp { data } { - - # The 'successors' dictionary will contain, for each string that - # is a prefix of any key, all characters that may follow that - # prefix. The 'prefixMapping' dictionary will have keys that - # are prefixes of keys and values that correspond to the keys. + # The 'successors' dictionary will contain, for each string that is a + # prefix of any key, all characters that may follow that prefix. The + # 'prefixMapping' dictionary will have keys that are prefixes of keys and + # values that correspond to the keys. set prefixMapping [dict create] set successors [dict create {} {}] @@ -2127,8 +2089,7 @@ proc ::tcl::clock::UniquePrefixRegexp { data } { # Walk the key-value pairs foreach { key value } $data { - - # Construct all prefixes of the key; + # Construct all prefixes of the key; set prefix {} foreach char [split $key {}] { @@ -2146,8 +2107,8 @@ proc ::tcl::clock::UniquePrefixRegexp { data } { } } - # Identify those prefixes that designate unique values, and - # those that are the full keys + # Identify those prefixes that designate unique values, and those that are + # the full keys set uniquePrefixMapping {} dict for { key valueList } $prefixMapping { @@ -2170,8 +2131,8 @@ proc ::tcl::clock::UniquePrefixRegexp { data } { # # MakeUniquePrefixRegexp -- # -# Service procedure for 'UniquePrefixRegexp' that constructs -# a regular expresison that matches the unique prefixes. +# Service procedure for 'UniquePrefixRegexp' that constructs a regular +# expresison that matches the unique prefixes. # # Parameters: # successors - Dictionary whose keys are all prefixes @@ -2183,18 +2144,17 @@ proc ::tcl::clock::UniquePrefixRegexp { data } { # prefixString - Current prefix being processed. # # Results: -# Returns a constructed regular expression that matches the set -# of unique prefixes beginning with the 'prefixString'. +# Returns a constructed regular expression that matches the set of +# unique prefixes beginning with the 'prefixString'. # # Side effects: # None. # #---------------------------------------------------------------------- -proc ::tcl::clock::MakeUniquePrefixRegexp { successors +proc ::tcl::clock::MakeUniquePrefixRegexp { successors uniquePrefixMapping prefixString } { - # Get the characters that may follow the current prefix string set schars [lsort -ascii [dict keys [dict get $successors $prefixString]]] @@ -2202,13 +2162,15 @@ proc ::tcl::clock::MakeUniquePrefixRegexp { successors return {} } - # If there is more than one successor character, or if the current - # prefix is a unique prefix, surround the generated re with non-capturing + # If there is more than one successor character, or if the current prefix + # is a unique prefix, surround the generated re with non-capturing # parentheses. set re {} - if { [dict exists $uniquePrefixMapping $prefixString] - || [llength $schars] > 1 } { + if { + [dict exists $uniquePrefixMapping $prefixString] + || [llength $schars] > 1 + } then { append re "(?:" } @@ -2230,7 +2192,7 @@ proc ::tcl::clock::MakeUniquePrefixRegexp { successors if { [dict exists $uniquePrefixMapping $prefixString] } { append re ")?" - } elseif { [llength $schars] > 1 } { + } elseif { [llength $schars] > 1 } { append re ")" } @@ -2241,8 +2203,8 @@ proc ::tcl::clock::MakeUniquePrefixRegexp { successors # # MakeParseCodeFromFields -- # -# Composes Tcl code to extract the Julian Day Number from a -# dictionary containing date fields. +# Composes Tcl code to extract the Julian Day Number from a dictionary +# containing date fields. # # Parameters: # dateFields -- Dictionary whose keys are fields of the date, @@ -2253,8 +2215,8 @@ proc ::tcl::clock::MakeUniquePrefixRegexp { successors # the list must be in ascending order by priority # # Results: -# Returns a burst of code that extracts the day number from the -# given date. +# Returns a burst of code that extracts the day number from the given +# date. # # Side effects: # None. @@ -2262,7 +2224,6 @@ proc ::tcl::clock::MakeUniquePrefixRegexp { successors #---------------------------------------------------------------------- proc ::tcl::clock::MakeParseCodeFromFields { dateFields parseActions } { - set currPrio 999 set currFieldPos [list] set currCodeBurst { @@ -2270,16 +2231,15 @@ proc ::tcl::clock::MakeParseCodeFromFields { dateFields parseActions } { } foreach { fieldSet prio parseAction } $parseActions { - - # If we've found an answer that's better than any that follow, - # quit now. + # If we've found an answer that's better than any that follow, quit + # now. if { $prio > $currPrio } { break } - # Accumulate the field positions that are used in the current - # field grouping. + # Accumulate the field positions that are used in the current field + # grouping. set fieldPos [list] set ok true @@ -2302,9 +2262,11 @@ proc ::tcl::clock::MakeParseCodeFromFields { dateFields parseActions } { if { $prio == $currPrio } { foreach currPos $currFieldPos newPos $fPos { - if { ![string is integer $newPos] - || ![string is integer $currPos] - || $newPos > $currPos } { + if { + ![string is integer $newPos] + || ![string is integer $currPos] + || $newPos > $currPos + } then { break } if { $newPos < $currPos } { @@ -2322,11 +2284,9 @@ proc ::tcl::clock::MakeParseCodeFromFields { dateFields parseActions } { set currPrio $prio set currFieldPos $fPos set currCodeBurst $parseAction - } return $currCodeBurst - } #---------------------------------------------------------------------- @@ -2344,14 +2304,13 @@ proc ::tcl::clock::MakeParseCodeFromFields { dateFields parseActions } { # Returns the locale that was previously current. # # Side effects: -# Does [mclocale]. If necessary, uses [mcload] to load the -# designated locale's files, and tracks that it has done so -# in the 'McLoaded' variable. +# Does [mclocale]. If necessary, uses [mcload] to load the designated +# locale's files, and tracks that it has done so in the 'McLoaded' +# variable. # #---------------------------------------------------------------------- proc ::tcl::clock::EnterLocale { locale oldLocaleVar } { - upvar 1 $oldLocaleVar oldLocale variable MsgDir @@ -2359,27 +2318,24 @@ proc ::tcl::clock::EnterLocale { locale oldLocaleVar } { set oldLocale [mclocale] if { $locale eq {system} } { - if { $::tcl_platform(platform) ne {windows} } { - - # On a non-windows platform, the 'system' locale is - # the same as the 'current' locale + # On a non-windows platform, the 'system' locale is the same as + # the 'current' locale set locale current } else { - - # On a windows platform, the 'system' locale is - # adapted from the 'current' locale by applying the - # date and time formats from the Control Panel. - # First, load the 'current' locale if it's not yet loaded + # On a windows platform, the 'system' locale is adapted from the + # 'current' locale by applying the date and time formats from the + # Control Panel. First, load the 'current' locale if it's not yet + # loaded if {![dict exists $McLoaded $oldLocale] } { mcload $MsgDir dict set McLoaded $oldLocale {} } - # Make a new locale string for the system locale, and - # get the Control Panel information + # Make a new locale string for the system locale, and get the + # Control Panel information set locale ${oldLocale}_windows if { ![dict exists $McLoaded $locale] } { @@ -2400,15 +2356,14 @@ proc ::tcl::clock::EnterLocale { locale oldLocaleVar } { mcload $MsgDir dict set McLoaded $locale {} } - -} +} #---------------------------------------------------------------------- # # LoadWindowsDateTimeFormats -- # -# Load the date/time formats from the Control Panel in Windows -# and convert them so that they're usable by Tcl. +# Load the date/time formats from the Control Panel in Windows and +# convert them so that they're usable by Tcl. # # Parameters: # locale - Name of the locale in whose message catalog @@ -2420,14 +2375,12 @@ proc ::tcl::clock::EnterLocale { locale oldLocaleVar } { # Side effects: # Updates the given message catalog with the locale strings. # -# Presumes that on entry, [mclocale] is set to the current locale, -# so that default strings can be obtained if the Registry query -# fails. +# Presumes that on entry, [mclocale] is set to the current locale, so that +# default strings can be obtained if the Registry query fails. # #---------------------------------------------------------------------- proc ::tcl::clock::LoadWindowsDateTimeFormats { locale } { - # Bail out if we can't find the Registry variable NoRegistry @@ -2529,7 +2482,6 @@ proc ::tcl::clock::LoadWindowsDateTimeFormats { locale } { } return - } #---------------------------------------------------------------------- @@ -2544,8 +2496,8 @@ proc ::tcl::clock::LoadWindowsDateTimeFormats { locale } { # format -- Format supplied to [clock scan] or [clock format] # # Results: -# Returns the string with locale-dependent composite format -# groups substituted out. +# Returns the string with locale-dependent composite format groups +# substituted out. # # Side effects: # None. @@ -2553,7 +2505,6 @@ proc ::tcl::clock::LoadWindowsDateTimeFormats { locale } { #---------------------------------------------------------------------- proc ::tcl::clock::LocalizeFormat { locale format } { - variable McLoaded if { [dict exists $McLoaded $locale FORMAT $format] } { @@ -2565,7 +2516,7 @@ proc ::tcl::clock::LocalizeFormat { locale format } { # string. Note that the order of the [string map] operations is # significant because later formats can refer to later ones; for example # %c can refer to %X, which in turn can refer to %T. - + set list { %% %% %D %m/%d/%Y @@ -2582,7 +2533,7 @@ proc ::tcl::clock::LocalizeFormat { locale format } { lappend list %c [string map $list [mc DATE_TIME_FORMAT]] lappend list %Ec [string map $list [mc LOCALE_DATE_TIME_FORMAT]] set format [string map $list $format] - + dict set McLoaded $locale FORMAT $inFormat $format return $format } @@ -2605,7 +2556,6 @@ proc ::tcl::clock::LocalizeFormat { locale format } { #---------------------------------------------------------------------- proc ::tcl::clock::FormatNumericTimeZone { z } { - if { $z < 0 } { set z [expr { - $z }] set retval - @@ -2620,7 +2570,6 @@ proc ::tcl::clock::FormatNumericTimeZone { z } { append retval [::format %02d $z] } return $retval - } #---------------------------------------------------------------------- @@ -2645,7 +2594,6 @@ proc ::tcl::clock::FormatNumericTimeZone { z } { #---------------------------------------------------------------------- proc ::tcl::clock::FormatStarDate { date } { - variable Roddenberry # Get day of year, zero based @@ -2696,7 +2644,6 @@ proc ::tcl::clock::FormatStarDate { date } { #---------------------------------------------------------------------- proc ::tcl::clock::ParseStarDate { year fractYear fractDay } { - variable Roddenberry # Build a tentative date from year and fraction. @@ -2712,8 +2659,8 @@ proc ::tcl::clock::ParseStarDate { year fractYear fractDay } { set lp [IsGregorianLeapYear $date] - # Reconvert the fractional year according to whether the given - # year is a leap year + # Reconvert the fractional year according to whether the given year is a + # leap year if { $lp } { dict set date dayOfYear \ @@ -2726,10 +2673,11 @@ proc ::tcl::clock::ParseStarDate { year fractYear fractDay } { dict unset date gregorian set date [GetJulianDayFromGregorianEraYearDay $date[set date {}]] - return [expr { 86400 * [dict get $date julianDay] - - 210866803200 - + ( 86400 / 10 ) * $fractDay }] - + return [expr { + 86400 * [dict get $date julianDay] + - 210866803200 + + ( 86400 / 10 ) * $fractDay + }] } #---------------------------------------------------------------------- @@ -2742,8 +2690,8 @@ proc ::tcl::clock::ParseStarDate { year fractYear fractDay } { # str - String containing a decimal wide integer # # Results: -# Returns the string as a pure wide integer. Throws an error if -# the string is misformatted or out of range. +# Returns the string as a pure wide integer. Throws an error if the +# string is misformatted or out of range. # #---------------------------------------------------------------------- @@ -2764,8 +2712,8 @@ proc ::tcl::clock::ScanWide { str } { # # InterpretTwoDigitYear -- # -# Given a date that contains only the year of the century, -# determines the target value of a two-digit year. +# Given a date that contains only the year of the century, determines +# the target value of a two-digit year. # # Parameters: # date - Dictionary containing fields of the date. @@ -2782,18 +2730,17 @@ proc ::tcl::clock::ScanWide { str } { # Side effects: # None. # -# The current rule for interpreting a two-digit year is that the year -# shall be between 1937 and 2037, thus staying within the range of a -# 32-bit signed value for time. This rule may change to a sliding -# window in future versions, so the 'baseTime' parameter (which is -# currently ignored) is provided in the procedure signature. +# The current rule for interpreting a two-digit year is that the year shall be +# between 1937 and 2037, thus staying within the range of a 32-bit signed +# value for time. This rule may change to a sliding window in future +# versions, so the 'baseTime' parameter (which is currently ignored) is +# provided in the procedure signature. # #---------------------------------------------------------------------- -proc ::tcl::clock::InterpretTwoDigitYear { date baseTime +proc ::tcl::clock::InterpretTwoDigitYear { date baseTime { twoDigitField yearOfCentury } { fourDigitField year } } { - set yr [dict get $date $twoDigitField] if { $yr <= 37 } { dict set date $fourDigitField [expr { $yr + 2000 }] @@ -2801,7 +2748,6 @@ proc ::tcl::clock::InterpretTwoDigitYear { date baseTime dict set date $fourDigitField [expr { $yr + 1900 }] } return $date - } #---------------------------------------------------------------------- @@ -2827,7 +2773,6 @@ proc ::tcl::clock::InterpretTwoDigitYear { date baseTime #---------------------------------------------------------------------- proc ::tcl::clock::AssignBaseYear { date baseTime timezone changeover } { - variable TZData # Find the Julian Day Number corresponding to the base time, and @@ -2841,7 +2786,6 @@ proc ::tcl::clock::AssignBaseYear { date baseTime timezone changeover } { dict set date year [dict get $date2 year] return $date - } #---------------------------------------------------------------------- @@ -2868,7 +2812,6 @@ proc ::tcl::clock::AssignBaseYear { date baseTime timezone changeover } { #---------------------------------------------------------------------- proc ::tcl::clock::AssignBaseIso8601Year {date baseTime timeZone changeover} { - variable TZData # Find the Julian Day Number corresponding to the base time @@ -2886,7 +2829,7 @@ proc ::tcl::clock::AssignBaseIso8601Year {date baseTime timeZone changeover} { # # AssignBaseMonth -- # -# Places the number of the current year and month into a +# Places the number of the current year and month into a # dictionary. # # Parameters: @@ -2905,7 +2848,6 @@ proc ::tcl::clock::AssignBaseIso8601Year {date baseTime timeZone changeover} { #---------------------------------------------------------------------- proc ::tcl::clock::AssignBaseMonth {date baseTime timezone changeover} { - variable TZData # Find the year and month corresponding to the base time @@ -2915,7 +2857,6 @@ proc ::tcl::clock::AssignBaseMonth {date baseTime timezone changeover} { dict set date year [dict get $date2 year] dict set date month [dict get $date2 month] return $date - } #---------------------------------------------------------------------- @@ -2941,7 +2882,6 @@ proc ::tcl::clock::AssignBaseMonth {date baseTime timezone changeover} { #---------------------------------------------------------------------- proc ::tcl::clock::AssignBaseWeek {date baseTime timeZone changeover} { - variable TZData # Find the Julian Day Number corresponding to the base time @@ -2978,7 +2918,6 @@ proc ::tcl::clock::AssignBaseWeek {date baseTime timeZone changeover} { #---------------------------------------------------------------------- proc ::tcl::clock::AssignBaseJulianDay { date baseTime timeZone changeover } { - variable TZData # Find the Julian Day Number corresponding to the base time @@ -3008,7 +2947,6 @@ proc ::tcl::clock::AssignBaseJulianDay { date baseTime timeZone changeover } { #---------------------------------------------------------------------- proc ::tcl::clock::InterpretHMSP { date } { - set hr [dict get $date hourAMPM] if { $hr == 12 } { set hr 0 @@ -3018,7 +2956,6 @@ proc ::tcl::clock::InterpretHMSP { date } { } dict set date hour $hr return [InterpretHMS $date[set date {}]] - } #---------------------------------------------------------------------- @@ -3041,11 +2978,11 @@ proc ::tcl::clock::InterpretHMSP { date } { #---------------------------------------------------------------------- proc ::tcl::clock::InterpretHMS { date } { - - return [expr { ( [dict get $date hour] * 60 - + [dict get $date minute] ) * 60 - + [dict get $date second] }] - + return [expr { + ( [dict get $date hour] * 60 + + [dict get $date minute] ) * 60 + + [dict get $date second] + }] } #---------------------------------------------------------------------- @@ -3068,7 +3005,6 @@ proc ::tcl::clock::InterpretHMS { date } { #---------------------------------------------------------------------- proc ::tcl::clock::GetSystemTimeZone {} { - variable CachedSystemTimeZone variable TimeZoneBad @@ -3101,76 +3037,69 @@ proc ::tcl::clock::GetSystemTimeZone {} { } else { return $timezone } - } #---------------------------------------------------------------------- # # ConvertLegacyTimeZone -- # -# Given an alphanumeric time zone identifier and the system -# time zone, convert the alphanumeric identifier to an -# unambiguous time zone. +# Given an alphanumeric time zone identifier and the system time zone, +# convert the alphanumeric identifier to an unambiguous time zone. # # Parameters: # tzname - Name of the time zone to convert # # Results: -# Returns a time zone name corresponding to tzname, but -# in an unambiguous form, generally +hhmm. +# Returns a time zone name corresponding to tzname, but in an +# unambiguous form, generally +hhmm. # -# This procedure is implemented primarily to allow the parsing of -# RFC822 date/time strings. Processing a time zone name on input -# is not recommended practice, because there is considerable room -# for ambiguity; for instance, is BST Brazilian Standard Time, or -# British Summer Time? +# This procedure is implemented primarily to allow the parsing of RFC822 +# date/time strings. Processing a time zone name on input is not recommended +# practice, because there is considerable room for ambiguity; for instance, is +# BST Brazilian Standard Time, or British Summer Time? # #---------------------------------------------------------------------- proc ::tcl::clock::ConvertLegacyTimeZone { tzname } { - variable LegacyTimeZone set tzname [string tolower $tzname] if { ![dict exists $LegacyTimeZone $tzname] } { return -code error -errorcode [list CLOCK badTZName $tzname] \ "time zone \"$tzname\" not found" - } else { - return [dict get $LegacyTimeZone $tzname] } - + return [dict get $LegacyTimeZone $tzname] } #---------------------------------------------------------------------- # # SetupTimeZone -- # -# Given the name or specification of a time zone, sets up -# its in-memory data. +# Given the name or specification of a time zone, sets up its in-memory +# data. # # Parameters: # tzname - Name of a time zone # # Results: -# Unless the time zone is ':localtime', sets the TZData array -# to contain the lookup table for local<->UTC conversion. -# Returns an error if the time zone cannot be parsed. +# Unless the time zone is ':localtime', sets the TZData array to contain +# the lookup table for local<->UTC conversion. Returns an error if the +# time zone cannot be parsed. # #---------------------------------------------------------------------- proc ::tcl::clock::SetupTimeZone { timezone } { - variable TZData if {! [info exists TZData($timezone)] } { variable MINWIDE if { $timezone eq {:localtime} } { - # Nothing to do, we'll convert using the localtime function - } elseif { [regexp {^([-+])(\d\d)(?::?(\d\d)(?::?(\d\d))?)?} $timezone \ - -> s hh mm ss] } { - + } elseif { + [regexp {^([-+])(\d\d)(?::?(\d\d)(?::?(\d\d))?)?} $timezone \ + -> s hh mm ss] + } then { # Make a fixed offset ::scan $hh %d hh @@ -3191,24 +3120,21 @@ proc ::tcl::clock::SetupTimeZone { timezone } { set TZData($timezone) [list [list $MINWIDE $offset -1 $timezone]] } elseif { [string index $timezone 0] eq {:} } { - # Convert using a time zone file - if { + if { [catch { LoadTimeZoneFile [string range $timezone 1 end] - }] - && [catch { + }] && [catch { LoadZoneinfoFile [string range $timezone 1 end] }] - } { + } then { return -code error \ -errorcode [list CLOCK badTimeZone $timezone] \ "time zone \"$timezone\" not found" } - + } elseif { ![catch {ParsePosixTimeZone $timezone} tzfields] } { - # This looks like a POSIX time zone - try to process it if { [catch {ProcessPosixTimeZone $tzfields} data opts] } { @@ -3221,9 +3147,8 @@ proc ::tcl::clock::SetupTimeZone { timezone } { } } else { - - # We couldn't parse this as a POSIX time zone. Try - # again with a time zone file - this time without a colon + # We couldn't parse this as a POSIX time zone. Try again with a + # time zone file - this time without a colon if { [catch { LoadTimeZoneFile $timezone }] && [catch { LoadZoneinfoFile $timezone } - opts] } { @@ -3247,25 +3172,22 @@ proc ::tcl::clock::SetupTimeZone { timezone } { # None. # # Results: -# Returns a time zone specifier that corresponds to the system -# time zone information found in the Registry. +# Returns a time zone specifier that corresponds to the system time zone +# information found in the Registry. # # Bugs: -# Fixed dates for DST change are unimplemented at present, because -# no time zone information supplied with Windows actually uses -# them! +# Fixed dates for DST change are unimplemented at present, because no +# time zone information supplied with Windows actually uses them! # -# On a Windows system where neither $env(TCL_TZ) nor $env(TZ) is -# specified, GuessWindowsTimeZone looks in the Registry for the -# system time zone information. It then attempts to find an entry -# in WinZoneInfo for a time zone that uses the same rules. If -# it finds one, it returns it; otherwise, it constructs a Posix-style -# time zone string and returns that. +# On a Windows system where neither $env(TCL_TZ) nor $env(TZ) is specified, +# GuessWindowsTimeZone looks in the Registry for the system time zone +# information. It then attempts to find an entry in WinZoneInfo for a time +# zone that uses the same rules. If it finds one, it returns it; otherwise, +# it constructs a Posix-style time zone string and returns that. # #---------------------------------------------------------------------- proc ::tcl::clock::GuessWindowsTimeZone {} { - variable WinZoneInfo variable NoRegistry variable TimeZoneBad @@ -3296,16 +3218,14 @@ proc ::tcl::clock::GuessWindowsTimeZone {} { lappend data $val } }] } { - # Missing values in the Registry - bail out return :localtime } - # Make up a Posix time zone specifier if we can't find one. - # Check here that the tzdata file exists, in case we're running - # in an environment (e.g. starpack) where tzdata is incomplete. - # (Bug 1237907) + # Make up a Posix time zone specifier if we can't find one. Check here + # that the tzdata file exists, in case we're running in an environment + # (e.g. starpack) where tzdata is incomplete. (Bug 1237907) if { [dict exists $WinZoneInfo $data] } { set tzname [dict get $WinZoneInfo $data] @@ -3353,11 +3273,11 @@ proc ::tcl::clock::GuessWindowsTimeZone {} { if { $dstYear == 0 } { append tzname ,M $dstMonth . $dstDayOfMonth . $dstDayOfWeek } else { - # I have not been able to find any locale on which - # Windows converts time zone on a fixed day of the year, - # hence don't know how to interpret the fields. - # If someone can inform me, I'd be glad to code it up. - # For right now, we bail out in such a case. + # I have not been able to find any locale on which Windows + # converts time zone on a fixed day of the year, hence don't + # know how to interpret the fields. If someone can inform me, + # I'd be glad to code it up. For right now, we bail out in + # such a case. return :localtime } append tzname / [::format %02d $dstHour] \ @@ -3366,11 +3286,11 @@ proc ::tcl::clock::GuessWindowsTimeZone {} { if { $stdYear == 0 } { append tzname ,M $stdMonth . $stdDayOfMonth . $stdDayOfWeek } else { - # I have not been able to find any locale on which - # Windows converts time zone on a fixed day of the year, - # hence don't know how to interpret the fields. - # If someone can inform me, I'd be glad to code it up. - # For right now, we bail out in such a case. + # I have not been able to find any locale on which Windows + # converts time zone on a fixed day of the year, hence don't + # know how to interpret the fields. If someone can inform me, + # I'd be glad to code it up. For right now, we bail out in + # such a case. return :localtime } append tzname / [::format %02d $stdHour] \ @@ -3378,10 +3298,9 @@ proc ::tcl::clock::GuessWindowsTimeZone {} { : [::format %02d $stdSecond] } dict set WinZoneInfo $data $tzname - } + } return [dict get $WinZoneInfo $data] - } #---------------------------------------------------------------------- @@ -3410,18 +3329,18 @@ proc ::tcl::clock::LoadTimeZoneFile { fileName } { return } - # Since an unsafe interp uses the [clock] command in the master, - # this code is security sensitive. Make sure that the path name - # cannot escape the given directory. + # Since an unsafe interp uses the [clock] command in the master, this code + # is security sensitive. Make sure that the path name cannot escape the + # given directory. if { ![regexp {^[[.-.][:alpha:]_]+(?:/[[.-.][:alpha:]_]+)*$} $fileName] } { return -code error \ -errorcode [list CLOCK badTimeZone $:fileName] \ "time zone \":$fileName\" not valid" } - if { [catch { + try { source -encoding utf-8 [file join $DataDir $fileName] - }] } { + } on error {} { return -code error \ -errorcode [list CLOCK badTimeZone :$fileName] \ "time zone \":$fileName\" not found" @@ -3439,8 +3358,8 @@ proc ::tcl::clock::LoadTimeZoneFile { fileName } { # fileName - Relative path name of the file to load. # # Results: -# Returns an empty result normally; returns an error if no -# Olson file was found or the file was malformed in some way. +# Returns an empty result normally; returns an error if no Olson file +# was found or the file was malformed in some way. # # Side effects: # TZData(:fileName) contains the time zone data @@ -3448,12 +3367,11 @@ proc ::tcl::clock::LoadTimeZoneFile { fileName } { #---------------------------------------------------------------------- proc ::tcl::clock::LoadZoneinfoFile { fileName } { - variable ZoneinfoPaths - # Since an unsafe interp uses the [clock] command in the master, - # this code is security sensitive. Make sure that the path name - # cannot escape the given directory. + # Since an unsafe interp uses the [clock] command in the master, this code + # is security sensitive. Make sure that the path name cannot escape the + # given directory. if { ![regexp {^[[.-.][:alpha:]_]+(?:/[[.-.][:alpha:]_]+)*$} $fileName] } { return -code error \ @@ -3482,15 +3400,14 @@ proc ::tcl::clock::LoadZoneinfoFile { fileName } { # fname - Absolute path name of the file. # # Results: -# Returns an empty result normally; returns an error if no -# Olson file was found or the file was malformed in some way. +# Returns an empty result normally; returns an error if no Olson file +# was found or the file was malformed in some way. # # Side effects: # TZData(:fileName) contains the time zone data # #---------------------------------------------------------------------- - proc ::tcl::clock::ReadZoneinfoFile {fileName fname} { variable MINWIDE variable TZData @@ -3509,8 +3426,8 @@ proc ::tcl::clock::ReadZoneinfoFile {fileName fname} { set d [read $f] close $f - # The file begins with a magic number, sixteen reserved bytes, - # and then six 4-byte integers giving counts of fileds in the file. + # The file begins with a magic number, sixteen reserved bytes, and then + # six 4-byte integers giving counts of fileds in the file. binary scan $d a4a1x15IIIIII \ magic version nIsGMT nIsStd nLeap nTime nType nChar @@ -3528,18 +3445,19 @@ proc ::tcl::clock::ReadZoneinfoFile {fileName fname} { return -code error "$fileName contains leap seconds" } - # In a version 2 file, we use the second part of the file, which - # contains 64-bit transition times. + # In a version 2 file, we use the second part of the file, which contains + # 64-bit transition times. if {$version eq "2"} { - set seek [expr {44 - + 5 * $nTime - + 6 * $nType - + 4 * $nLeap - + $nIsStd - + $nIsGMT - + $nChar - }] + set seek [expr { + 44 + + 5 * $nTime + + 6 * $nType + + 4 * $nLeap + + $nIsStd + + $nIsGMT + + $nChar + }] binary scan $d @${seek}a4a1x15IIIIII \ magic version nIsGMT nIsStd nLeap nTime nType nChar if {$magic ne {TZif}} { @@ -3563,9 +3481,9 @@ proc ::tcl::clock::ReadZoneinfoFile {fileName fname} { } set codes [linsert $codes 0 0] - # Next come ${nType} time type descriptions, each of which has an - # offset (seconds east of GMT), a DST indicator, and an index into - # the abbreviation text. + # Next come ${nType} time type descriptions, each of which has an offset + # (seconds east of GMT), a DST indicator, and an index into the + # abbreviation text. for { set i 0 } { $i < $nType } { incr i } { binary scan $d @${seek}Icc gmtOff isDst abbrInd @@ -3573,10 +3491,10 @@ proc ::tcl::clock::ReadZoneinfoFile {fileName fname} { incr seek 6 } - # Next come $nChar characters of time zone name abbreviations, - # which are null-terminated. - # We build them up into a dictionary indexed by character index, - # because that's what's in the indices above. + # Next come $nChar characters of time zone name abbreviations, which are + # null-terminated. + # We build them up into a dictionary indexed by character index, because + # that's what's in the indices above. binary scan $d @${seek}a${nChar} abbrs incr seek ${nChar} @@ -3606,8 +3524,8 @@ proc ::tcl::clock::ReadZoneinfoFile {fileName fname} { } # In a version 2 file, there is also a POSIX-style time zone description - # at the very end of the file. To get to it, skip over - # nLeap leap second values (8 bytes each), + # at the very end of the file. To get to it, skip over nLeap leap second + # values (8 bytes each), # nIsStd standard/DST indicators and nIsGMT UTC/local indicators. if {$version eq {2}} { @@ -3640,8 +3558,8 @@ proc ::tcl::clock::ReadZoneinfoFile {fileName fname} { # tz Time zone specifier to be interpreted # # Results: -# Returns a dictionary whose values contain the various pieces of -# the time zone specification. +# Returns a dictionary whose values contain the various pieces of the +# time zone specification. # # Side effects: # None. @@ -3652,7 +3570,7 @@ proc ::tcl::clock::ReadZoneinfoFile {fileName fname} { # The following keys are present in the dictionary: # stdName - Name of the time zone when Daylight Saving Time # is not in effect. -# stdSignum - Sign (+, -, or empty) of the offset from Greenwich +# stdSignum - Sign (+, -, or empty) of the offset from Greenwich # to the given (non-DST) time zone. + and the empty # string denote zones west of Greenwich, - denotes east # of Greenwich; this is contrary to the ISO convention @@ -3697,14 +3615,13 @@ proc ::tcl::clock::ReadZoneinfoFile {fileName fname} { # endHours, endMinutes, endSeconds - # Specify the end of DST in the same way that the start* fields # specify the beginning of DST. -# -# This procedure serves only to break the time specifier into fields. -# No attempt is made to canonicalize the fields or supply default values. +# +# This procedure serves only to break the time specifier into fields. No +# attempt is made to canonicalize the fields or supply default values. # #---------------------------------------------------------------------- proc ::tcl::clock::ParsePosixTimeZone { tz } { - if {[regexp -expanded -nocase -- { ^ # 1 - Standard time zone name @@ -3715,8 +3632,8 @@ proc ::tcl::clock::ParsePosixTimeZone { tz } { ([[:digit:]]{1,2}) (?: # 4 - Standard time zone offset, minutes - : ([[:digit:]]{1,2}) - (?: + : ([[:digit:]]{1,2}) + (?: # 5 - Standard time zone offset, seconds : ([[:digit:]]{1,2} ) )? @@ -3732,8 +3649,8 @@ proc ::tcl::clock::ParsePosixTimeZone { tz } { ([[:digit:]]{1,2}) (?: # 9 - DST time zone offset, minutes - : ([[:digit:]]{1,2}) - (?: + : ([[:digit:]]{1,2}) + (?: # 10 - DST time zone offset, seconds : ([[:digit:]]{1,2}) )? @@ -3746,8 +3663,8 @@ proc ::tcl::clock::ParsePosixTimeZone { tz } { ( J ? ) ( [[:digit:]]+ ) | M # 13 - Month number 14 - Week of month 15 - Day of week - ( [[:digit:]] + ) - [.] ( [[:digit:]] + ) + ( [[:digit:]] + ) + [.] ( [[:digit:]] + ) [.] ( [[:digit:]] + ) ) (?: @@ -3768,8 +3685,8 @@ proc ::tcl::clock::ParsePosixTimeZone { tz } { ( J ? ) ( [[:digit:]]+ ) | M # 21 - Month number 22 - Week of month 23 - Day of week - ( [[:digit:]] + ) - [.] ( [[:digit:]] + ) + ( [[:digit:]] + ) + [.] ( [[:digit:]] + ) [.] ( [[:digit:]] + ) ) (?: @@ -3796,27 +3713,21 @@ proc ::tcl::clock::ParsePosixTimeZone { tz } { x(endJ) x(endDayOfYear) \ x(endMonth) x(endWeekOfMonth) x(endDayOfWeek) \ x(endHours) x(endMinutes) x(endSeconds)] } { - # it's a good timezone return [array get x] - - } else { - - return -code error\ - -errorcode [list CLOCK badTimeZone $tz] \ - "unable to parse time zone specification \"$tz\"" - } + return -code error\ + -errorcode [list CLOCK badTimeZone $tz] \ + "unable to parse time zone specification \"$tz\"" } #---------------------------------------------------------------------- # # ProcessPosixTimeZone -- # -# Handle a Posix time zone after it's been broken out into -# fields. +# Handle a Posix time zone after it's been broken out into fields. # # Parameters: # z - Dictionary returned from 'ParsePosixTimeZone' @@ -3830,7 +3741,6 @@ proc ::tcl::clock::ParsePosixTimeZone { tz } { #---------------------------------------------------------------------- proc ::tcl::clock::ProcessPosixTimeZone { z } { - variable MINWIDE variable TZData @@ -3845,20 +3755,20 @@ proc ::tcl::clock::ProcessPosixTimeZone { z } { } else { set stdSignum -1 } - set stdHours [lindex [::scan [dict get $z stdHours] %d] 0] + set stdHours [lindex [::scan [dict get $z stdHours] %d] 0] if { [dict get $z stdMinutes] ne {} } { - set stdMinutes [lindex [::scan [dict get $z stdMinutes] %d] 0] + set stdMinutes [lindex [::scan [dict get $z stdMinutes] %d] 0] } else { set stdMinutes 0 } if { [dict get $z stdSeconds] ne {} } { - set stdSeconds [lindex [::scan [dict get $z stdSeconds] %d] 0] + set stdSeconds [lindex [::scan [dict get $z stdSeconds] %d] 0] } else { set stdSeconds 0 } - set stdOffset [expr { ( ( $stdHours * 60 + $stdMinutes ) - * 60 + $stdSeconds ) - * $stdSignum }] + set stdOffset [expr { + (($stdHours * 60 + $stdMinutes) * 60 + $stdSeconds) * $stdSignum + }] set data [list [list $MINWIDE $stdOffset 0 $stdName]] # If there's no daylight zone, we're done @@ -3881,20 +3791,20 @@ proc ::tcl::clock::ProcessPosixTimeZone { z } { if { [dict get $z dstHours] eq {} } { set dstOffset [expr { 3600 + $stdOffset }] } else { - set dstHours [lindex [::scan [dict get $z dstHours] %d] 0] + set dstHours [lindex [::scan [dict get $z dstHours] %d] 0] if { [dict get $z dstMinutes] ne {} } { - set dstMinutes [lindex [::scan [dict get $z dstMinutes] %d] 0] + set dstMinutes [lindex [::scan [dict get $z dstMinutes] %d] 0] } else { set dstMinutes 0 } if { [dict get $z dstSeconds] ne {} } { - set dstSeconds [lindex [::scan [dict get $z dstSeconds] %d] 0] + set dstSeconds [lindex [::scan [dict get $z dstSeconds] %d] 0] } else { set dstSeconds 0 } - set dstOffset [expr { ( ( $dstHours * 60 + $dstMinutes ) - * 60 + $dstSeconds ) - * $dstSignum }] + set dstOffset [expr { + (($dstHours*60 + $dstMinutes) * 60 + $dstSeconds) * $dstSignum + }] } # Fill in defaults for European or US DST rules @@ -3903,8 +3813,10 @@ proc ::tcl::clock::ProcessPosixTimeZone { z } { # US end time is the first Sunday in November. # EU end time is the last Sunday in October - if { [dict get $z startDayOfYear] eq {} - && [dict get $z startMonth] eq {} } { + if { + [dict get $z startDayOfYear] eq {} + && [dict get $z startMonth] eq {} + } then { if {($stdSignum * $stdHours>=0) && ($stdSignum * $stdHours<=12)} { # EU dict set z startWeekOfMonth 5 @@ -3923,8 +3835,10 @@ proc ::tcl::clock::ProcessPosixTimeZone { z } { dict set z startMinutes 0 dict set z startSeconds 0 } - if { [dict get $z endDayOfYear] eq {} - && [dict get $z endMonth] eq {} } { + if { + [dict get $z endDayOfYear] eq {} + && [dict get $z endMonth] eq {} + } then { if {($stdSignum * $stdHours>=0) && ($stdSignum * $stdHours<=12)} { # EU dict set z endMonth 10 @@ -3964,15 +3878,14 @@ proc ::tcl::clock::ProcessPosixTimeZone { z } { } return $data - -} +} #---------------------------------------------------------------------- # # DeterminePosixDSTTime -- # -# Determines the time that Daylight Saving Time starts or ends -# from a Posix time zone specification. +# Determines the time that Daylight Saving Time starts or ends from a +# Posix time zone specification. # # Parameters: # z - Time zone data returned from ParsePosixTimeZone. @@ -3982,13 +3895,12 @@ proc ::tcl::clock::ProcessPosixTimeZone { z } { # y - The year for which the transition time is to be determined. # # Results: -# Returns the transition time as a count of seconds from -# the epoch. The time is relative to the wall clock, not UTC. +# Returns the transition time as a count of seconds from the epoch. The +# time is relative to the wall clock, not UTC. # #---------------------------------------------------------------------- proc ::tcl::clock::DeterminePosixDSTTime { z bound y } { - variable FEB_28 # Determine the start or end day of DST @@ -3996,18 +3908,16 @@ proc ::tcl::clock::DeterminePosixDSTTime { z bound y } { set date [dict create era CE year $y] set doy [dict get $z ${bound}DayOfYear] if { $doy ne {} } { - # Time was specified as a day of the year if { [dict get $z ${bound}J] ne {} - && [IsGregorianLeapYear $y] + && [IsGregorianLeapYear $y] && ( $doy > $FEB_28 ) } { incr doy } dict set date dayOfYear $doy set date [GetJulianDayFromEraYearDay $date[set date {}] 2361222] } else { - # Time was specified as a day of the week within a month dict set date month [dict get $z ${bound}Month] @@ -4022,8 +3932,9 @@ proc ::tcl::clock::DeterminePosixDSTTime { z bound y } { } set jd [dict get $date julianDay] - set seconds [expr { wide($jd) * wide(86400) - - wide(210866803200) }] + set seconds [expr { + wide($jd) * wide(86400) - wide(210866803200) + }] set h [dict get $z ${bound}Hours] if { $h eq {} } { @@ -4045,7 +3956,6 @@ proc ::tcl::clock::DeterminePosixDSTTime { z bound y } { } set tod [expr { ( $h * 60 + $m ) * 60 + $s }] return [expr { $seconds + $tod }] - } #---------------------------------------------------------------------- @@ -4063,26 +3973,26 @@ proc ::tcl::clock::DeterminePosixDSTTime { z bound y } { # for the target locale. # # Results: -# Returns the dictionary, augmented with the keys, 'localeEra' -# and 'localeYear'. +# Returns the dictionary, augmented with the keys, 'localeEra' and +# 'localeYear'. # #---------------------------------------------------------------------- proc ::tcl::clock::GetLocaleEra { date etable } { - set index [BSearch $etable [dict get $date localSeconds]] if { $index < 0} { dict set date localeEra \ [::format %02d [expr { [dict get $date year] / 100 }]] - dict set date localeYear \ - [expr { [dict get $date year] % 100 }] + dict set date localeYear [expr { + [dict get $date year] % 100 + }] } else { dict set date localeEra [lindex $etable $index 1] - dict set date localeYear [expr { [dict get $date year] - - [lindex $etable $index 2] }] + dict set date localeYear [expr { + [dict get $date year] - [lindex $etable $index 2] + }] } return $date - } #---------------------------------------------------------------------- @@ -4100,10 +4010,9 @@ proc ::tcl::clock::GetLocaleEra { date etable } { # adopted in the current locale. # # Results: -# Returns the given dictionary augmented with a 'julianDay' key -# whose value is the desired Julian Day Number, and a 'gregorian' -# key that specifies whether the calendar is Gregorian (1) or -# Julian (0). +# Returns the given dictionary augmented with a 'julianDay' key whose +# value is the desired Julian Day Number, and a 'gregorian' key that +# specifies whether the calendar is Gregorian (1) or Julian (0). # # Side effects: # None. @@ -4114,7 +4023,6 @@ proc ::tcl::clock::GetLocaleEra { date etable } { #---------------------------------------------------------------------- proc ::tcl::clock::GetJulianDayFromEraYearDay {date changeover} { - # Get absolute year number from the civil year switch -exact -- [dict get $date era] { @@ -4130,21 +4038,25 @@ proc ::tcl::clock::GetJulianDayFromEraYearDay {date changeover} { # Try the Gregorian calendar first. dict set date gregorian 1 - set jd [expr { 1721425 - + [dict get $date dayOfYear] - + ( 365 * $ym1 ) - + ( $ym1 / 4 ) - - ( $ym1 / 100 ) - + ( $ym1 / 400 ) }] - + set jd [expr { + 1721425 + + [dict get $date dayOfYear] + + ( 365 * $ym1 ) + + ( $ym1 / 4 ) + - ( $ym1 / 100 ) + + ( $ym1 / 400 ) + }] + # If the date is before the Gregorian change, use the Julian calendar. if { $jd < $changeover } { dict set date gregorian 0 - set jd [expr { 1721423 - + [dict get $date dayOfYear] - + ( 365 * $ym1 ) - + ( $ym1 / 4 ) }] + set jd [expr { + 1721423 + + [dict get $date dayOfYear] + + ( 365 * $ym1 ) + + ( $ym1 / 4 ) + }] } dict set date julianDay $jd @@ -4155,8 +4067,8 @@ proc ::tcl::clock::GetJulianDayFromEraYearDay {date changeover} { # # GetJulianDayFromEraYearMonthWeekDay -- # -# Determines the Julian Day number corresponding to the nth -# given day-of-the-week in a given month. +# Determines the Julian Day number corresponding to the nth given +# day-of-the-week in a given month. # # Parameters: # date - Dictionary containing the keys, 'era', 'year', 'month' @@ -4175,10 +4087,9 @@ proc ::tcl::clock::GetJulianDayFromEraYearDay {date changeover} { #---------------------------------------------------------------------- proc ::tcl::clock::GetJulianDayFromEraYearMonthWeekDay {date changeover} { - - # Come up with a reference day; either the zeroeth day of the - # given month (dayOfWeekInMonth >= 0) or the seventh day of the - # following month (dayOfWeekInMonth < 0) + # Come up with a reference day; either the zeroeth day of the given month + # (dayOfWeekInMonth >= 0) or the seventh day of the following month + # (dayOfWeekInMonth < 0) set date2 $date set week [dict get $date dayOfWeekInMonth] @@ -4194,7 +4105,6 @@ proc ::tcl::clock::GetJulianDayFromEraYearMonthWeekDay {date changeover} { [dict get $date2 julianDay]] dict set date julianDay [expr { $wd0 + 7 * $week }] return $date - } #---------------------------------------------------------------------- @@ -4217,9 +4127,8 @@ proc ::tcl::clock::GetJulianDayFromEraYearMonthWeekDay {date changeover} { #---------------------------------------------------------------------- proc ::tcl::clock::IsGregorianLeapYear { date } { - switch -exact -- [dict get $date era] { - BCE { + BCE { set year [expr { 1 - [dict get $date year]}] } CE { @@ -4237,15 +4146,14 @@ proc ::tcl::clock::IsGregorianLeapYear { date } { } else { return 1 } - } #---------------------------------------------------------------------- # # WeekdayOnOrBefore -- # -# Determine the nearest day of week (given by the 'weekday' -# parameter, Sunday==0) on or before a given Julian Day. +# Determine the nearest day of week (given by the 'weekday' parameter, +# Sunday==0) on or before a given Julian Day. # # Parameters: # weekday -- Day of the week @@ -4260,18 +4168,16 @@ proc ::tcl::clock::IsGregorianLeapYear { date } { #---------------------------------------------------------------------- proc ::tcl::clock::WeekdayOnOrBefore { weekday j } { - set k [expr { ( $weekday + 6 ) % 7 }] return [expr { $j - ( $j - $k ) % 7 }] - } #---------------------------------------------------------------------- # # BSearch -- # -# Service procedure that does binary search in several places -# inside the 'clock' command. +# Service procedure that does binary search in several places inside the +# 'clock' command. # # Parameters: # list - List of lists, sorted in ascending order by the @@ -4279,8 +4185,8 @@ proc ::tcl::clock::WeekdayOnOrBefore { weekday j } { # key - Value to search for # # Results: -# Returns the index of the greatest element in $list that is less -# than or equal to $key. +# Returns the index of the greatest element in $list that is less than +# or equal to $key. # # Side effects: # None. @@ -4288,7 +4194,6 @@ proc ::tcl::clock::WeekdayOnOrBefore { weekday j } { #---------------------------------------------------------------------- proc ::tcl::clock::BSearch { list key } { - if {[llength $list] == 0} { return -1 } @@ -4300,13 +4205,12 @@ proc ::tcl::clock::BSearch { list key } { set u [expr { [llength $list] - 1 }] while { $l < $u } { - # At this point, we know that # $k >= [lindex $list $l 0] # Either $u == [llength $list] or else $k < [lindex $list $u+1 0] # We find the midpoint of the interval {l,u} rounded UP, compare - # against it, and set l or u to maintain the invariant. Note - # that the interval shrinks at each step, guaranteeing convergence. + # against it, and set l or u to maintain the invariant. Note that the + # interval shrinks at each step, guaranteeing convergence. set m [expr { ( $l + $u + 1 ) / 2 }] if { $key >= [lindex $list $m 0] } { @@ -4350,15 +4254,14 @@ proc ::tcl::clock::BSearch { list key } { # order. # # Notes: -# It is possible that adding a number of months or years will adjust -# the day of the month as well. For instance, the time at -# one month after 31 January is either 28 or 29 February, because -# February has fewer than 31 days. +# It is possible that adding a number of months or years will adjust the +# day of the month as well. For instance, the time at one month after +# 31 January is either 28 or 29 February, because February has fewer +# than 31 days. # #---------------------------------------------------------------------- proc ::tcl::clock::add { clockval args } { - if { [llength $args] % 2 != 0 } { set cmdName "clock add" return -code error \ @@ -4377,15 +4280,10 @@ proc ::tcl::clock::add { clockval args } { set timezone [GetSystemTimeZone] foreach { a b } $args { - if { [string is integer -strict $a] } { - lappend offsets $a $b - } else { - switch -exact -- $a { - -g - -gm - -gmt { set gmt $b } @@ -4397,8 +4295,7 @@ proc ::tcl::clock::add { clockval args } { set timezone $b } default { - return -code error \ - -errorcode [list CLOCK badSwitch $a] \ + throw [list CLOCK badSwitch $a] \ "bad switch \"$a\",\ must be -gmt, -locale or -timezone" } @@ -4414,20 +4311,16 @@ proc ::tcl::clock::add { clockval args } { "cannot use -gmt and -timezone in same call" } if { [catch { expr { wide($clockval) } } result] } { - return -code error \ - "expected integer but got \"$clockval\"" + return -code error "expected integer but got \"$clockval\"" } - if { ![string is boolean $gmt] } { - return -code error \ - "expected boolean value but got \"$gmt\"" - } else { - if { $gmt } { - set timezone :GMT - } + if { ![string is boolean -strict $gmt] } { + return -code error "expected boolean value but got \"$gmt\"" + } elseif { $gmt } { + set timezone :GMT } EnterLocale $locale oldLocale - + set changeover [mc GREGORIAN_CHANGE_DATE] if {[catch {SetupTimeZone $timezone} retval opts]} { @@ -4435,29 +4328,25 @@ proc ::tcl::clock::add { clockval args } { return -options $opts $retval } - set status [catch { - + try { foreach { quantity unit } $offsets { - switch -exact -- $unit { - years - year { - set clockval \ - [AddMonths [expr { 12 * $quantity }] \ - $clockval $timezone $changeover] + set clockval [AddMonths [expr { 12 * $quantity }] \ + $clockval $timezone $changeover] } months - month { set clockval [AddMonths $quantity $clockval $timezone \ - $changeover] + $changeover] } weeks - week { set clockval [AddDays [expr { 7 * $quantity }] \ - $clockval $timezone $changeover] + $clockval $timezone $changeover] } days - day { set clockval [AddDays $quantity $clockval $timezone \ - $changeover] + $changeover] } hours - hour { @@ -4471,31 +4360,24 @@ proc ::tcl::clock::add { clockval args } { } default { - error "unknown unit \"$unit\", must be \ - years, months, weeks, days, hours, minutes or seconds" \ - "unknown unit \"$unit\", must be \ - years, months, weeks, days, hours, minutes or seconds" \ - [list CLOCK badUnit $unit] + throw [list CLOCK badUnit $unit] \ + "unknown unit \"$unit\", must be \ + years, months, weeks, days, hours, minutes or seconds" } } } - } result opts] - - # Restore the locale - - if { [info exists oldLocale] } { - mclocale $oldLocale - } + return $clockval + } trap CLOCK {result opts} { + # Conceal the innards of [clock] when it's an expected error + dict unset opts -errorinfo + return -options $opts $result + } finally { + # Restore the locale - if { $status == 1 } { - if { [lindex [dict get $opts -errorcode] 0] eq {CLOCK} } { - dict unset opts -errorinfo + if { [info exists oldLocale] } { + mclocale $oldLocale } - return -options $opts $result - } else { - return $clockval } - } #---------------------------------------------------------------------- @@ -4520,7 +4402,6 @@ proc ::tcl::clock::add { clockval args } { #---------------------------------------------------------------------- proc ::tcl::clock::AddMonths { months clockval timezone changeover } { - variable DaysInRomanMonthInCommonYear variable DaysInRomanMonthInLeapYear variable TZData @@ -4528,8 +4409,9 @@ proc ::tcl::clock::AddMonths { months clockval timezone changeover } { # Convert the time to year, month, day, and fraction of day. set date [GetDateFields $clockval $TZData($timezone) $changeover] - dict set date secondOfDay [expr { [dict get $date localSeconds] - % 86400 }] + dict set date secondOfDay [expr { + [dict get $date localSeconds] % 86400 + }] dict set date tzName $timezone # Add the requisite number of months @@ -4558,23 +4440,23 @@ proc ::tcl::clock::AddMonths { months clockval timezone changeover } { set date [GetJulianDayFromEraYearMonthDay \ $date[set date {}]\ $changeover] - dict set date localSeconds \ - [expr { -210866803200 - + ( 86400 * wide([dict get $date julianDay]) ) - + [dict get $date secondOfDay] }] + dict set date localSeconds [expr { + -210866803200 + + ( 86400 * wide([dict get $date julianDay]) ) + + [dict get $date secondOfDay] + }] set date [ConvertLocalToUTC $date[set date {}] $TZData($timezone) \ $changeover] return [dict get $date seconds] - } #---------------------------------------------------------------------- # # AddDays -- # -# Add a given number of days to a given clock value in a given -# time zone. +# Add a given number of days to a given clock value in a given time +# zone. # # Parameters: # days - Number of days to add (may be negative) @@ -4584,8 +4466,7 @@ proc ::tcl::clock::AddMonths { months clockval timezone changeover } { # in the target locale. # # Results: -# Returns the new clock value as a number of seconds since -# the epoch. +# Returns the new clock value as a number of seconds since the epoch. # # Side effects: # None. @@ -4593,14 +4474,14 @@ proc ::tcl::clock::AddMonths { months clockval timezone changeover } { #---------------------------------------------------------------------- proc ::tcl::clock::AddDays { days clockval timezone changeover } { - variable TZData # Convert the time to Julian Day set date [GetDateFields $clockval $TZData($timezone) $changeover] - dict set date secondOfDay [expr { [dict get $date localSeconds] - % 86400 }] + dict set date secondOfDay [expr { + [dict get $date localSeconds] % 86400 + }] dict set date tzName $timezone # Add the requisite number of days @@ -4609,23 +4490,23 @@ proc ::tcl::clock::AddDays { days clockval timezone changeover } { # Reconvert to a number of seconds - dict set date localSeconds \ - [expr { -210866803200 - + ( 86400 * wide([dict get $date julianDay]) ) - + [dict get $date secondOfDay] }] + dict set date localSeconds [expr { + -210866803200 + + ( 86400 * wide([dict get $date julianDay]) ) + + [dict get $date secondOfDay] + }] set date [ConvertLocalToUTC $date[set date {}] $TZData($timezone) \ $changeover] return [dict get $date seconds] - } #---------------------------------------------------------------------- # # mc -- # -# Wrapper around ::msgcat::mc that caches the result according -# to the locale. +# Wrapper around ::msgcat::mc that caches the result according to the +# locale. # # Parameters: # Accepts the name of the message to retrieve. @@ -4646,11 +4527,10 @@ proc ::tcl::clock::mc { name } { set Locale [mclocale] if { [dict exists $McLoaded $Locale $name] } { return [dict get $McLoaded $Locale $name] - } else { - set val [::msgcat::mc $name] - dict set McLoaded $Locale $name $val - return $val } + set val [::msgcat::mc $name] + dict set McLoaded $Locale $name $val + return $val } #---------------------------------------------------------------------- @@ -4671,7 +4551,6 @@ proc ::tcl::clock::mc { name } { #---------------------------------------------------------------------- proc ::tcl::clock::ClearCaches {} { - variable FormatProc variable LocaleNumeralCache variable McLoaded @@ -4691,5 +4570,4 @@ proc ::tcl::clock::ClearCaches {} { catch {unset CachedSystemTimeZone} set TimeZoneBad {} InitTZData - } diff --git a/library/dde/pkgIndex.tcl b/library/dde/pkgIndex.tcl index ce31825..9e62ac8 100644 --- a/library/dde/pkgIndex.tcl +++ b/library/dde/pkgIndex.tcl @@ -1,6 +1,6 @@ -if {![package vsatisfies [package provide Tcl] 8]} return +if {![package vsatisfies [package provide Tcl] 8.5]} return if {[string compare [info sharedlibextension] .dll]} return -if {[info exists ::tcl_platform(debug)]} { +if {[::tcl::pkgconfig get debug]} { package ifneeded dde 1.3.2 [list load [file join $dir tcldde13g.dll] dde] } else { package ifneeded dde 1.3.2 [list load [file join $dir tcldde13.dll] dde] diff --git a/library/history.tcl b/library/history.tcl index 888d144..51d2404 100644 --- a/library/history.tcl +++ b/library/history.tcl @@ -4,18 +4,18 @@ # # Copyright (c) 1997 Sun Microsystems, Inc. # -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# See the file "license.terms" for information on usage and redistribution of +# this file, and for a DISCLAIMER OF ALL WARRANTIES. # - -# The tcl::history array holds the history list and -# some additional bookkeeping variables. + +# The tcl::history array holds the history list and some additional +# bookkeeping variables. # # nextid the index used for the next history list item. # keep the max size of the history list # oldest the index of the oldest item in the history. -namespace eval tcl { +namespace eval ::tcl { variable history if {![info exists history]} { array set history { @@ -24,163 +24,78 @@ namespace eval tcl { oldest -20 } } -} + namespace ensemble create -command ::tcl::history -map { + add ::tcl::HistAdd + change ::tcl::HistChange + clear ::tcl::HistClear + event ::tcl::HistEvent + info ::tcl::HistInfo + keep ::tcl::HistKeep + nextid ::tcl::HistNextID + redo ::tcl::HistRedo + } +} + # history -- # # This is the main history command. See the man page for its interface. -# This does argument checking and calls helper procedures in the -# history namespace. - -proc history {args} { - set len [llength $args] - if {$len == 0} { - return [tcl::HistInfo] - } - set key [lindex $args 0] - set options "add, change, clear, event, info, keep, nextid, or redo" - switch -glob -- $key { - a* { # history add - - if {$len > 3} { - return -code error "wrong # args: should be \"history add event ?exec?\"" - } - if {![string match $key* add]} { - return -code error "bad option \"$key\": must be $options" - } - if {$len == 3} { - set arg [lindex $args 2] - if {! ([string match e* $arg] && [string match $arg* exec])} { - return -code error "bad argument \"$arg\": should be \"exec\"" - } - } - return [tcl::HistAdd [lindex $args 1] [lindex $args 2]] - } - ch* { # history change - - if {($len > 3) || ($len < 2)} { - return -code error "wrong # args: should be \"history change newValue ?event?\"" - } - if {![string match $key* change]} { - return -code error "bad option \"$key\": must be $options" - } - if {$len == 2} { - set event 0 - } else { - set event [lindex $args 2] - } - - return [tcl::HistChange [lindex $args 1] $event] - } - cl* { # history clear - - if {($len > 1)} { - return -code error "wrong # args: should be \"history clear\"" - } - if {![string match $key* clear]} { - return -code error "bad option \"$key\": must be $options" - } - return [tcl::HistClear] - } - e* { # history event - - if {$len > 2} { - return -code error "wrong # args: should be \"history event ?event?\"" - } - if {![string match $key* event]} { - return -code error "bad option \"$key\": must be $options" - } - if {$len == 1} { - set event -1 - } else { - set event [lindex $args 1] - } - return [tcl::HistEvent $event] - } - i* { # history info - - if {$len > 2} { - return -code error "wrong # args: should be \"history info ?count?\"" - } - if {![string match $key* info]} { - return -code error "bad option \"$key\": must be $options" - } - return [tcl::HistInfo [lindex $args 1]] - } - k* { # history keep +# This does some argument checking and calls the helper ensemble in the +# tcl namespace. - if {$len > 2} { - return -code error "wrong # args: should be \"history keep ?count?\"" - } - if {$len == 1} { - return [tcl::HistKeep] - } else { - set limit [lindex $args 1] - if {[catch {expr {~$limit}}] || ($limit < 0)} { - return -code error "illegal keep count \"$limit\"" - } - return [tcl::HistKeep $limit] - } - } - n* { # history nextid - - if {$len > 1} { - return -code error "wrong # args: should be \"history nextid\"" - } - if {![string match $key* nextid]} { - return -code error "bad option \"$key\": must be $options" - } - return [expr {$tcl::history(nextid) + 1}] - } - r* { # history redo +proc ::history {args} { + # If no command given, we're doing 'history info'. Can't be done with an + # ensemble unknown handler, as those don't fire when no subcommand is + # given at all. - if {$len > 2} { - return -code error "wrong # args: should be \"history redo ?event?\"" - } - if {![string match $key* redo]} { - return -code error "bad option \"$key\": must be $options" - } - return [tcl::HistRedo [lindex $args 1]] - } - default { - return -code error "bad option \"$key\": must be $options" - } + if {![llength $args]} { + set args info } -} + # Tricky stuff needed to make stack and errors come out right! + tailcall apply {arglist {tailcall history {*}$arglist} ::tcl} $args +} + # tcl::HistAdd -- # # Add an item to the history, and optionally eval it at the global scope # # Parameters: -# command the command to add -# exec (optional) a substring of "exec" causes the -# command to be evaled. +# event the command to add +# exec (optional) a substring of "exec" causes the command to +# be evaled. # Results: # If executing, then the results of the command are returned # # Side Effects: # Adds to the history list - proc tcl::HistAdd {command {exec {}}} { +proc ::tcl::HistAdd {event {exec {}}} { variable history + if { + [prefix longest {exec {}} $exec] eq "" + && [llength [info level 0]] == 3 + } then { + return -code error "bad argument \"$exec\": should be \"exec\"" + } + # Do not add empty commands to the history - if {[string trim $command] eq ""} { + if {[string trim $event] eq ""} { return "" } - set i [incr history(nextid)] - set history($i) $command - set j [incr history(oldest)] - unset -nocomplain history($j) - if {[string match e* $exec]} { - return [uplevel #0 $command] - } else { - return {} + # Maintain the history + set history([incr history(nextid)]) $event + unset -nocomplain history([incr history(oldest)]) + + # Only execute if 'exec' (or non-empty prefix of it) given + if {$exec eq ""} { + return "" } + tailcall eval $event } - + # tcl::HistKeep -- # # Set or query the limit on the length of the history list @@ -194,20 +109,22 @@ proc history {args} { # Side Effects: # Updates history(keep) if a limit is specified - proc tcl::HistKeep {{limit {}}} { +proc ::tcl::HistKeep {{count {}}} { variable history - if {$limit eq ""} { + if {[llength [info level 0]] == 1} { return $history(keep) - } else { - set oldold $history(oldest) - set history(oldest) [expr {$history(nextid) - $limit}] - for {} {$oldold <= $history(oldest)} {incr oldold} { - unset -nocomplain history($oldold) - } - set history(keep) $limit } + if {![string is integer -strict $count] || ($count < 0)} { + return -code error "illegal keep count \"$count\"" + } + set oldold $history(oldest) + set history(oldest) [expr {$history(nextid) - $count}] + for {} {$oldold <= $history(oldest)} {incr oldold} { + unset -nocomplain history($oldold) + } + set history(keep) $count } - + # tcl::HistClear -- # # Erase the history list @@ -221,7 +138,7 @@ proc history {args} { # Side Effects: # Resets the history array, except for the keep limit - proc tcl::HistClear {} { +proc ::tcl::HistClear {} { variable history set keep $history(keep) unset history @@ -231,7 +148,7 @@ proc history {args} { oldest -$keep \ ] } - + # tcl::HistInfo -- # # Return a pretty-printed version of the history list @@ -242,14 +159,16 @@ proc history {args} { # Results: # A formatted history list - proc tcl::HistInfo {{num {}}} { +proc ::tcl::HistInfo {{count {}}} { variable history - if {$num eq ""} { - set num [expr {$history(keep) + 1}] + if {[llength [info level 0]] == 1} { + set count [expr {$history(keep) + 1}] + } elseif {![string is integer -strict $count]} { + return -code error "bad integer \"$count\"" } set result {} set newline "" - for {set i [expr {$history(nextid) - $num + 1}]} \ + for {set i [expr {$history(nextid) - $count + 1}]} \ {$i <= $history(nextid)} {incr i} { if {![info exists history($i)]} { continue @@ -260,11 +179,11 @@ proc history {args} { } return $result } - + # tcl::HistRedo -- # -# Fetch the previous or specified event, execute it, and then -# replace the current history item with that event. +# Fetch the previous or specified event, execute it, and then replace +# the current history item with that event. # # Parameters: # event (optional) index of history item to redo. Defaults to -1, @@ -276,20 +195,18 @@ proc history {args} { # Side Effects: # Replaces the current history list item with the one being redone. - proc tcl::HistRedo {{event -1}} { +proc ::tcl::HistRedo {{event -1}} { variable history - if {$event eq ""} { - set event -1 - } + set i [HistIndex $event] if {$i == $history(nextid)} { return -code error "cannot redo the current event" } set cmd $history($i) HistChange $cmd 0 - uplevel #0 $cmd + tailcall eval $cmd } - + # tcl::HistIndex -- # # Map from an event specifier to an index in the history list. @@ -299,22 +216,22 @@ proc history {args} { # If this is a positive number, it is used directly. # If it is a negative number, then it counts back to a previous # event, where -1 is the most recent event. -# A string can be matched, either by being the prefix of -# a command or by matching a command with string match. +# A string can be matched, either by being the prefix of a +# command or by matching a command with string match. # # Results: # The index into history, or an error if the index didn't match. - proc tcl::HistIndex {event} { +proc ::tcl::HistIndex {event} { variable history - if {[catch {expr {~$event}}]} { + if {![string is integer -strict $event]} { for {set i [expr {$history(nextid)-1}]} {[info exists history($i)]} \ {incr i -1} { if {[string match $event* $history($i)]} { - return $i; + return $i } if {[string match $event $history($i)]} { - return $i; + return $i } } return -code error "no event matches \"$event\"" @@ -331,43 +248,64 @@ proc history {args} { } return $i } - + # tcl::HistEvent -- # # Map from an event specifier to the value in the history list. # # Parameters: -# event index of history item to redo. See index for a -# description of possible event patterns. +# event index of history item to redo. See index for a description of +# possible event patterns. # # Results: # The value from the history list. - proc tcl::HistEvent {event} { +proc ::tcl::HistEvent {{event -1}} { variable history set i [HistIndex $event] - if {[info exists history($i)]} { - return [string trimright $history($i) \ \n] - } else { - return ""; + if {![info exists history($i)]} { + return "" } + return [string trimright $history($i) \ \n] } - + # tcl::HistChange -- # # Replace a value in the history list. # # Parameters: -# cmd The new value to put into the history list. -# event (optional) index of history item to redo. See index for a -# description of possible event patterns. This defaults -# to 0, which specifies the current event. +# newValue The new value to put into the history list. +# event (optional) index of history item to redo. See index for a +# description of possible event patterns. This defaults to 0, +# which specifies the current event. # # Side Effects: # Changes the history list. - proc tcl::HistChange {cmd {event 0}} { +proc ::tcl::HistChange {newValue {event 0}} { variable history set i [HistIndex $event] - set history($i) $cmd + set history($i) $newValue } + +# tcl::HistNextID -- +# +# Returns the number of the next history event. +# +# Parameters: +# None. +# +# Side Effects: +# None. + +proc ::tcl::HistNextID {} { + variable history + return [expr {$history(nextid) + 1}] +} + +return + +# Local Variables: +# mode: tcl +# fill-column: 78 +# End: diff --git a/library/http/http.tcl b/library/http/http.tcl index ce9f634..b5ce82b 100644 --- a/library/http/http.tcl +++ b/library/http/http.tcl @@ -8,10 +8,10 @@ # See the file "license.terms" for information on usage and redistribution of # this file, and for a DISCLAIMER OF ALL WARRANTIES. -package require Tcl 8.4 +package require Tcl 8.6 # Keep this in sync with pkgIndex.tcl and with the install directories in # Makefiles -package provide http 2.7.9 +package provide http 2.8.4 namespace eval http { # Allow resourcing to not clobber existing data @@ -25,7 +25,13 @@ namespace eval http { -proxyfilter http::ProxyRequired -urlencoding utf-8 } - set http(-useragent) "Tcl http client package [package provide http]" + # We need a useragent string of this style or various servers will refuse to + # send us compressed content even when we ask for it. This follows the + # de-facto layout of user-agent strings in current browsers. + set http(-useragent) "Mozilla/5.0\ + ([string totitle $::tcl_platform(platform)]; U;\ + $::tcl_platform(os) $::tcl_platform(osVersion))\ + http/[package provide http] Tcl/[package provide Tcl]" } proc init {} { @@ -92,7 +98,7 @@ namespace eval http { # Arguments: # msg Message to output # -proc http::Log {args} {} +if {[info command http::Log] eq {}} {proc http::Log {args} {}} # http::register -- # @@ -193,7 +199,7 @@ proc http::Finish {token {errormsg ""} {skipCB 0}} { if { ($state(status) eq "timeout") || ($state(status) eq "error") || ([info exists state(connection)] && ($state(connection) eq "close")) - } then { + } { CloseSocket $state(sock) $token } if {[info exists state(after)]} { @@ -361,7 +367,7 @@ proc http::geturl {url args} { if { [info exists type($flag)] && ![string is $type($flag) -strict $value] - } then { + } { unset $token return -code error \ "Bad value for $flag ($value), must be $type($flag)" @@ -647,7 +653,11 @@ proc http::geturl {url args} { if {[info exists state(-method)] && $state(-method) ne ""} { set how $state(-method) } - + # We cannot handle chunked encodings with -handler, so force HTTP/1.0 + # until we can manage this. + if {[info exists state(-handler)]} { + set state(-protocol) 1.0 + } if {[catch { puts $sock "$how $srvurl HTTP/$state(-protocol)" puts $sock "Accept: $http(-accept)" @@ -695,14 +705,8 @@ proc http::geturl {url args} { puts $sock "$key: $value" } } - # Soft zlib dependency check - no package require - if { - !$accept_encoding_seen && - ([package vsatisfies [package provide Tcl] 8.6] - || [llength [package provide zlib]]) && - !([info exists state(-channel)] || [info exists state(-handler)]) - } then { - puts $sock "Accept-Encoding: gzip, identity, *;q=0.1" + if {!$accept_encoding_seen && ![info exists state(-handler)]} { + puts $sock "Accept-Encoding: deflate,gzip,compress" } if {$isQueryChannel && $state(querylength) == 0} { # Try to determine size of data in channel. If we cannot seek, the @@ -726,7 +730,7 @@ proc http::geturl {url args} { # versions TclHttpd in various error cases). Depending on the # platform, the client may or may not be able to get the response from # the server because of the error it will get trying to write the post - # data. Having both fileevents active changes the timing and the + # data. Having both fileevents active changes the timing and the # behavior, but no two platforms (among Solaris, Linux, and NT) behave # the same, and none behave all that well in any case. Servers should # always read their POST data if they expect the client to read their @@ -759,7 +763,7 @@ proc http::geturl {url args} { return -code error [lindex $state(error) 0] } } - } err]} then { + } err]} { # The socket probably was never connected, or the connection dropped # later. @@ -867,7 +871,7 @@ proc http::Connect {token} { if { [eof $state(sock)] || [set err [fconfigure $state(sock) -error]] ne "" - } then { + } { Finish $token "connect failed $err" 1 } else { set state(status) connect @@ -918,7 +922,7 @@ proc http::Write {token} { set done 1 } } - } err]} then { + } err]} { # Do not call Finish here, but instead let the read half of the socket # process whatever server reply there is to get. @@ -997,7 +1001,7 @@ proc http::Event {sock token} { && ($state(connection) eq "close")) || [info exists state(transfer)]) && ($state(totalsize) == 0) - } then { + } { Log "body size is 0 and no events likely - complete." Eof $token return @@ -1008,26 +1012,20 @@ proc http::Event {sock token} { if { $state(-binary) || ![string match -nocase text* $state(type)] - } then { + } { # Turn off conversions for non-text data set state(binary) 1 } - if { - $state(binary) || [string match *gzip* $state(coding)] || - [string match *compress* $state(coding)] - } then { - if {[info exists state(-channel)]} { + if {[info exists state(-channel)]} { + if {$state(binary) || [llength [ContentEncoding $token]]} { fconfigure $state(-channel) -translation binary } - } - if { - [info exists state(-channel)] && - ![info exists state(-handler)] - } then { - # Initiate a sequence of background fcopies - fileevent $sock readable {} - CopyStart $sock $token - return + if {![info exists state(-handler)]} { + # Initiate a sequence of background fcopies + fileevent $sock readable {} + CopyStart $sock $token + return + } } } elseif {$n > 0} { # Process header lines @@ -1082,7 +1080,7 @@ proc http::Event {sock token} { } elseif { [info exists state(transfer)] && $state(transfer) eq "chunked" - } then { + } { set size 0 set chunk [getTextLine $sock] set n [string length $chunk] @@ -1122,11 +1120,11 @@ proc http::Event {sock token} { if { ($state(totalsize) > 0) && ($state(currentsize) >= $state(totalsize)) - } then { + } { Eof $token } } - } err]} then { + } err]} { return [Finish $token $err] } else { if {[info exists state(-progress)]} { @@ -1179,14 +1177,54 @@ proc http::getTextLine {sock} { # Side Effects # This closes the connection upon error -proc http::CopyStart {sock token} { - variable $token +proc http::CopyStart {sock token {initial 1}} { + upvar #0 $token state + if {[info exists state(transfer)] && $state(transfer) eq "chunked"} { + foreach coding [ContentEncoding $token] { + lappend state(zlib) [zlib stream $coding] + } + make-transformation-chunked $sock [namespace code [list CopyChunk $token]] + } else { + if {$initial} { + foreach coding [ContentEncoding $token] { + zlib push $coding $sock + } + } + if {[catch { + fcopy $sock $state(-channel) -size $state(-blocksize) -command \ + [list http::CopyDone $token] + } err]} { + Finish $token $err + } + } +} + +proc http::CopyChunk {token chunk} { upvar 0 $token state - if {[catch { - fcopy $sock $state(-channel) -size $state(-blocksize) -command \ - [list http::CopyDone $token] - } err]} then { - Finish $token $err + if {[set count [string length $chunk]]} { + incr state(currentsize) $count + if {[info exists state(zlib)]} { + foreach stream $state(zlib) { + set chunk [$stream add $chunk] + } + } + puts -nonewline $state(-channel) $chunk + if {[info exists state(-progress)]} { + eval [linsert $state(-progress) end \ + $token $state(totalsize) $state(currentsize)] + } + } else { + Log "CopyChunk Finish $token" + if {[info exists state(zlib)]} { + set excess "" + foreach stream $state(zlib) { + catch {set excess [$stream add -finalize $excess]} + } + puts -nonewline $state(-channel) $excess + foreach stream $state(zlib) { $stream close } + unset state(zlib) + } + Eof $token ;# FIX ME: pipelining. } } @@ -1216,7 +1254,7 @@ proc http::CopyDone {token count {error {}}} { } elseif {[catch {eof $sock} iseof] || $iseof} { Eof $token } else { - CopyStart $sock $token + CopyStart $sock $token 0 } } @@ -1240,34 +1278,31 @@ proc http::Eof {token {force 0}} { set state(status) ok } - if {($state(coding) eq "gzip") && [string length $state(body)] > 0} { - if {[catch { - if {[package vsatisfies [package present Tcl] 8.6]} { - # The zlib integration into 8.6 includes proper gzip support - set state(body) [zlib gunzip $state(body)] - } else { - set state(body) [Gunzip $state(body)] + if {[string length $state(body)] > 0} { + if {[catch { + foreach coding [ContentEncoding $token] { + set state(body) [zlib $coding $state(body)] } - } err]} then { + } err]} { + Log "error doing $coding '$state(body)'" return [Finish $token $err] - } - } + } - if {!$state(binary)} { - # If we are getting text, set the incoming channel's encoding - # correctly. iso8859-1 is the RFC default, but this could be any IANA - # charset. However, we only know how to convert what we have - # encodings for. + if {!$state(binary)} { + # If we are getting text, set the incoming channel's encoding + # correctly. iso8859-1 is the RFC default, but this could be any IANA + # charset. However, we only know how to convert what we have + # encodings for. - set enc [CharsetToEncoding $state(charset)] - if {$enc ne "binary"} { - set state(body) [encoding convertfrom $enc $state(body)] - } + set enc [CharsetToEncoding $state(charset)] + if {$enc ne "binary"} { + set state(body) [encoding convertfrom $enc $state(body)] + } - # Translate text line endings. - set state(body) [string map {\r\n \n \r \n} $state(body)] + # Translate text line endings. + set state(body) [string map {\r\n \n \r \n} $state(body)] + } } - Finish $token } @@ -1366,7 +1401,7 @@ proc http::ProxyRequired {host} { if { ![info exists http(-proxyport)] || ![string length $http(-proxyport)] - } then { + } { set http(-proxyport) 8080 } return [list $http(-proxyhost) $http(-proxyport)] @@ -1412,59 +1447,57 @@ proc http::CharsetToEncoding {charset} { } } -# http::Gunzip -- -# -# Decompress data transmitted using the gzip transfer coding. -# - -# FIX ME: redo using zlib sinflate -proc http::Gunzip {data} { - binary scan $data Scb5icc magic method flags time xfl os - set pos 10 - if {$magic != 0x1f8b} { - return -code error "invalid data: supplied data is not in gzip format" - } - if {$method != 8} { - return -code error "invalid compression method" - } - - # lassign [split $flags ""] f_text f_crc f_extra f_name f_comment - foreach {f_text f_crc f_extra f_name f_comment} [split $flags ""] break - set extra "" - if {$f_extra} { - binary scan $data @${pos}S xlen - incr pos 2 - set extra [string range $data $pos $xlen] - set pos [incr xlen] - } - - set name "" - if {$f_name} { - set ndx [string first \0 $data $pos] - set name [string range $data $pos $ndx] - set pos [incr ndx] - } - - set comment "" - if {$f_comment} { - set ndx [string first \0 $data $pos] - set comment [string range $data $pos $ndx] - set pos [incr ndx] - } - - set fcrc "" - if {$f_crc} { - set fcrc [string range $data $pos [incr pos]] - incr pos +# Return the list of content-encoding transformations we need to do in order. +proc http::ContentEncoding {token} { + upvar 0 $token state + set r {} + if {[info exists state(coding)]} { + foreach coding [split $state(coding) ,] { + switch -exact -- $coding { + deflate { lappend r inflate } + gzip - x-gzip { lappend r gunzip } + compress - x-compress { lappend r decompress } + identity {} + default { + return -code error "unsupported content-encoding \"$coding\"" + } + } + } } + return $r +} - binary scan [string range $data end-7 end] ii crc size - set inflated [zlib inflate [string range $data $pos end-8]] - set chk [zlib crc32 $inflated] - if {($crc & 0xffffffff) != ($chk & 0xffffffff)} { - return -code error "invalid data: checksum mismatch $crc != $chk" - } - return $inflated +proc http::make-transformation-chunked {chan command} { + set lambda {{chan command} { + set data "" + set size -1 + yield + while {1} { + chan configure $chan -translation {crlf binary} + while {[gets $chan line] < 1} { yield } + chan configure $chan -translation {binary binary} + if {[scan $line %x size] != 1} { return -code error "invalid size: \"$line\"" } + set chunk "" + while {$size && ![chan eof $chan]} { + set part [chan read $chan $size] + incr size -[string length $part] + append chunk $part + } + if {[catch { + uplevel #0 [linsert $command end $chunk] + }]} { + http::Log "Error in callback: $::errorInfo" + } + if {[string length $chunk] == 0} { + # channel might have been closed in the callback + catch {chan event $chan readable {}} + return + } + } + }} + coroutine dechunk$chan ::apply $lambda $chan $command + chan event $chan readable [namespace origin dechunk$chan] + return } # Local variables: diff --git a/library/http/pkgIndex.tcl b/library/http/pkgIndex.tcl index 815ac12..d51f8a8 100644 --- a/library/http/pkgIndex.tcl +++ b/library/http/pkgIndex.tcl @@ -1,4 +1,2 @@ -# Tcl package index file, version 1.1 - -if {![package vsatisfies [package provide Tcl] 8.4]} {return} -package ifneeded http 2.7.9 [list tclPkgSetup $dir http 2.7.9 {{http.tcl source {::http::config ::http::formatQuery ::http::geturl ::http::reset ::http::wait ::http::register ::http::unregister ::http::mapReply}}}] +if {![package vsatisfies [package provide Tcl] 8.6]} {return} +package ifneeded http 2.8.4 [list tclPkgSetup $dir http 2.8.4 {{http.tcl source {::http::config ::http::formatQuery ::http::geturl ::http::reset ::http::wait ::http::register ::http::unregister ::http::mapReply}}}] diff --git a/library/http1.0/http.tcl b/library/http1.0/http.tcl index 8041ee4..8329de4 100644 --- a/library/http1.0/http.tcl +++ b/library/http1.0/http.tcl @@ -339,12 +339,12 @@ proc http_formatQuery {args} { # 2 Convert every other character to an array lookup # 3 Escape constructs that are "special" to the tcl parser # 4 "subst" the result, doing all the array substitutions - + proc httpMapReply {string} { global httpFormMap set alphanumeric a-zA-Z0-9 if {![info exists httpFormMap]} { - + for {set i 1} {$i <= 256} {incr i} { set c [format %c $i] if {![string match \[$alphanumeric\] $c]} { @@ -363,7 +363,7 @@ proc http_formatQuery {args} { return [subst $string] } -# Default proxy filter. +# Default proxy filter. proc httpProxyRequired {host} { global http if {[info exists http(-proxyhost)] && [string length $http(-proxyhost)]} { diff --git a/library/init.tcl b/library/init.tcl index 389f319..685fc7b 100644 --- a/library/init.tcl +++ b/library/init.tcl @@ -15,7 +15,7 @@ if {[info commands package] == ""} { error "version mismatch: library\nscripts expect Tcl version 7.5b1 or later but the loaded version is\nonly [info patchlevel]" } -package require -exact Tcl 8.5.11 +package require -exact Tcl 8.6b2 # Compute the auto path to use in this interpreter. # The values on the path come from several locations: @@ -76,7 +76,7 @@ namespace eval tcl { # TIP #255 min and max functions namespace eval mathfunc { proc min {args} { - if {[llength $args] == 0} { + if {![llength $args]} { return -code error \ "too few arguments to math function \"min\"" } @@ -87,12 +87,12 @@ namespace eval tcl { if {[catch {expr {double($arg)}} err]} { return -code error $err } - if {$arg < $val} { set val $arg } + if {$arg < $val} {set val $arg} } return $val } proc max {args} { - if {[llength $args] == 0} { + if {![llength $args]} { return -code error \ "too few arguments to math function \"max\"" } @@ -103,7 +103,7 @@ namespace eval tcl { if {[catch {expr {double($arg)}} err]} { return -code error $err } - if {$arg > $val} { set val $arg } + if {$arg > $val} {set val $arg} } return $val } @@ -177,9 +177,9 @@ if {[interp issafe]} { -subcommands { add clicks format microseconds milliseconds scan seconds }] - + # Auto-loading stubs for 'clock.tcl' - + foreach cmd {add format scan} { proc ::tcl::clock::$cmd args { variable TclLibDir @@ -216,11 +216,9 @@ if {[namespace which -command tclLog] eq ""} { # exist in the interpreter. It takes the following steps to make the # command available: # -# 1. See if the command has the form "namespace inscope ns cmd" and -# if so, concatenate its arguments onto the end and evaluate it. -# 2. See if the autoload facility can locate the command in a +# 1. See if the autoload facility can locate the command in a # Tcl script file. If so, load it and execute it. -# 3. If the command was invoked interactively at top-level: +# 2. If the command was invoked interactively at top-level: # (a) see if the command exists as an executable UNIX program. # If so, "exec" the command. # (b) see if the command requests csh-like history substitution @@ -237,35 +235,28 @@ proc unknown args { variable ::tcl::UnknownPending global auto_noexec auto_noload env tcl_interactive - # If the command word has the form "namespace inscope ns cmd" - # then concatenate its arguments onto the end and evaluate it. - set cmd [lindex $args 0] - if {[regexp "^:*namespace\[ \t\n\]+inscope" $cmd] && [llength $cmd] == 4} { - #return -code error "You need an {*}" - set arglist [lrange $args 1 end] - set ret [catch {uplevel 1 ::$cmd $arglist} result opts] - dict unset opts -errorinfo - dict incr opts -level - return -options $opts $result + if {[info exists ::errorInfo]} { + set savedErrorInfo $::errorInfo + } + if {[info exists ::errorCode]} { + set savedErrorCode $::errorCode } - catch {set savedErrorInfo $::errorInfo} - catch {set savedErrorCode $::errorCode} - set name $cmd + set name [lindex $args 0] if {![info exists auto_noload]} { # # Make sure we're not trying to load the same proc twice. # if {[info exists UnknownPending($name)]} { return -code error "self-referential recursion\ - in \"unknown\" for command \"$name\""; + in \"unknown\" for command \"$name\"" } - set UnknownPending($name) pending; + set UnknownPending($name) pending set ret [catch { auto_load $name [uplevel 1 {::namespace current}] } msg opts] - unset UnknownPending($name); + unset UnknownPending($name) if {$ret != 0} { dict append opts -errorinfo "\n (autoloading \"$name\")" return -options $opts $msg @@ -288,7 +279,7 @@ proc unknown args { if {$code == 1} { # # Compute stack trace contribution from the [uplevel]. - # Note the dependence on how Tcl_AddErrorInfo, etc. + # Note the dependence on how Tcl_AddErrorInfo, etc. # construct the stack trace. # set errorInfo [dict get $opts -errorinfo] @@ -419,7 +410,7 @@ proc unknown args { # library file to create the procedure. Returns 1 if it successfully # loaded the procedure, 0 otherwise. # -# Arguments: +# Arguments: # cmd - Name of the command to find and load. # namespace (optional) The namespace where the command is being used - must be # a canonical namespace as returned [namespace current] @@ -443,7 +434,7 @@ proc auto_load {cmd {namespace {}}} { # info commands $name # Unfortunately, if the name has glob-magic chars in it like * # or [], it may not match. For our purposes here, a better - # route is to use + # route is to use # namespace which -command $name if {[namespace which -command $name] ne ""} { return 1 @@ -474,7 +465,7 @@ proc auto_load {cmd {namespace {}}} { # of available commands. Returns 1 if the index is loaded, and 0 if # the index is already loaded and up to date. # -# Arguments: +# Arguments: # None. proc auto_load_index {} { @@ -553,34 +544,34 @@ proc auto_qualify {cmd namespace} { # Before each return case we give an example of which category it is # with the following form : - # ( inputCmd, inputNameSpace) -> output + # (inputCmd, inputNameSpace) -> output if {[string match ::* $cmd]} { if {$n > 1} { - # ( ::foo::bar , * ) -> ::foo::bar + # (::foo::bar , *) -> ::foo::bar return [list $cmd] } else { - # ( ::global , * ) -> global + # (::global , *) -> global return [list [string range $cmd 2 end]] } } - + # Potentially returning 2 elements to try : # (if the current namespace is not the global one) if {$n == 0} { if {$namespace eq "::"} { - # ( nocolons , :: ) -> nocolons + # (nocolons , ::) -> nocolons return [list $cmd] } else { - # ( nocolons , ::sub ) -> ::sub::nocolons nocolons + # (nocolons , ::sub) -> ::sub::nocolons nocolons return [list ${namespace}::$cmd $cmd] } } elseif {$namespace eq "::"} { - # ( foo::bar , :: ) -> ::foo::bar + # (foo::bar , ::) -> ::foo::bar return [list ::$cmd] } else { - # ( foo::bar , ::sub ) -> ::sub::foo::bar ::foo::bar + # (foo::bar , ::sub) -> ::sub::foo::bar ::foo::bar return [list ${namespace}::$cmd ::$cmd] } } @@ -622,13 +613,13 @@ proc auto_import {pattern} { # auto_execok -- # -# Returns string that indicates name of program to execute if +# Returns string that indicates name of program to execute if # name corresponds to a shell builtin or an executable in the -# Windows search path, or "" otherwise. Builds an associative -# array auto_execs that caches information about previous checks, +# Windows search path, or "" otherwise. Builds an associative +# array auto_execs that caches information about previous checks, # for speed. # -# Arguments: +# Arguments: # name - Name of a command. if {$tcl_platform(platform) eq "windows"} { @@ -683,7 +674,7 @@ proc auto_execok name { set path "[file dirname [info nameof]];.;" if {[info exists env(WINDIR)]} { - set windir $env(WINDIR) + set windir $env(WINDIR) } if {[info exists windir]} { if {$tcl_platform(os) eq "Windows NT"} { @@ -700,7 +691,9 @@ proc auto_execok name { foreach dir [split $path {;}] { # Skip already checked directories - if {[info exists checked($dir)] || ($dir eq {})} { continue } + if {[info exists checked($dir)] || ($dir eq "")} { + continue + } set checked($dir) {} foreach ext $execExtensions { set file [file join $dir ${name}${ext}] @@ -748,13 +741,13 @@ proc auto_execok name { # This procedure is called by Tcl's core when attempts to call the # filesystem's copydirectory function fail. The semantics of the call # are that 'dest' does not yet exist, i.e. dest should become the exact -# image of src. If dest does exist, we throw an error. -# +# image of src. If dest does exist, we throw an error. +# # Note that making changes to this procedure can change the results # of running Tcl's tests. # -# Arguments: -# action - "renaming" or "copying" +# Arguments: +# action - "renaming" or "copying" # src - source directory # dest - destination directory proc tcl::CopyDirectory {action src dest} { @@ -782,7 +775,7 @@ proc tcl::CopyDirectory {action src dest} { # exists, then we should only call this function if -force # is true, which means we just want to over-write. So, # the following code is now commented out. - # + # # return -code error "error $action \"$src\" to\ # \"$dest\": file already exists" } else { @@ -815,7 +808,7 @@ proc tcl::CopyDirectory {action src dest} { # Have to be careful to capture both visible and hidden files. # We will also be more generous to the file system and not # assume the hidden and non-hidden lists are non-overlapping. - # + # # On Unix 'hidden' files begin with '.'. On other platforms # or filesystems hidden files may have other interpretations. set filelist [concat [glob -nocomplain -directory $src *] \ @@ -828,3 +821,31 @@ proc tcl::CopyDirectory {action src dest} { } return } + +# TIP 131 +if 0 { +proc tcl::rmmadwiw {} { + set magic { + 42 83 fe f6 ff f8 f1 e5 c6 f9 eb fd ff fb f1 e5 cc f5 ec f5 e3 fd fe + ff f5 fa f3 e1 c7 f9 f2 fd ff f9 fe f9 ed f4 fa f6 e6 f9 f2 e6 fd f9 + ff f9 f6 e6 fa fd ff fc fb fc f9 f1 ed + } + foreach mystic [lassign $magic tragic] { + set comic [expr (0x$mystic ^ 0x$tragic) - 255 + 0x$tragic] + append logic [format %x $comic] + set tragic $mystic + } + binary format H* $logic +} + +proc tcl::mathfunc::rmmadwiw {} { + set age [expr {9*6}] + set mind "" + while {$age} { + lappend mind [expr {$age%13}] + set age [expr {$age/13}] + } + set matter [lreverse $mind] + return [join $matter ""] +} +} diff --git a/library/opt/optparse.tcl b/library/opt/optparse.tcl index c9438a0..fc77fa1 100644 --- a/library/opt/optparse.tcl +++ b/library/opt/optparse.tcl @@ -11,7 +11,7 @@ package require Tcl 8.2 # When this version number changes, update the pkgIndex.tcl file # and the install directory in the Makefiles. -package provide opt 0.4.5 +package provide opt 0.4.6 namespace eval ::tcl { @@ -33,7 +33,7 @@ namespace eval ::tcl { # Every OptProc give usage information on "procname -help". # Try "tcl::OptParseTest -help" and "tcl::OptParseTest -a" and # then other arguments. - # + # # example of 'valid' call: # ::tcl::OptParseTest save -4 -pr 23 -libsok SybTcl\ # -nostatics false ch1 @@ -69,10 +69,10 @@ namespace eval ::tcl { ################### No User serviceable part below ! ############### # Array storing the parsed descriptions - variable OptDesc; - array set OptDesc {}; + variable OptDesc + array set OptDesc {} # Next potentially free key id (numeric) - variable OptDescN 0; + variable OptDescN 0 # Inside algorithm/mechanism description: # (not for the faint hearted ;-) @@ -84,8 +84,8 @@ namespace eval ::tcl { # # The general structure of a "program" is # notation (pseudo bnf like) -# name :== definition defines "name" as being "definition" -# { x y z } means list of x, y, and z +# name :== definition defines "name" as being "definition" +# { x y z } means list of x, y, and z # x* means x repeated 0 or more time # x+ means "x x*" # x? means optionally x @@ -110,7 +110,7 @@ namespace eval ::tcl { # # And for this application: # -# singleStep :== { instruction varname {hasBeenSet currentValue} type +# singleStep :== { instruction varname {hasBeenSet currentValue} type # typeArgs help } # instruction :== "flags" | "value" # type :== knowType | anyword @@ -143,54 +143,54 @@ namespace eval ::tcl { # generate a unused keyid if not given # proc ::tcl::OptKeyRegister {desc {key ""}} { - variable OptDesc; - variable OptDescN; + variable OptDesc + variable OptDescN if {[string equal $key ""]} { # in case a key given to us as a parameter was a number while {[info exists OptDesc($OptDescN)]} {incr OptDescN} - set key $OptDescN; - incr OptDescN; + set key $OptDescN + incr OptDescN } # program counter - set program [list [list "P" 1]]; + set program [list [list "P" 1]] # are we processing flags (which makes a single program step) - set inflags 0; + set inflags 0 - set state {}; + set state {} # flag used to detect that we just have a single (flags set) subprogram. - set empty 1; + set empty 1 foreach item $desc { if {$state == "args"} { # more items after 'args'... - return -code error "'args' special argument must be the last one"; + return -code error "'args' special argument must be the last one" } - set res [OptNormalizeOne $item]; - set state [lindex $res 0]; + set res [OptNormalizeOne $item] + set state [lindex $res 0] if {$inflags} { if {$state == "flags"} { # add to 'subprogram' - lappend flagsprg $res; + lappend flagsprg $res } else { # put in the flags # structure for flag programs items is a list of # {subprgcounter {prg flag 1} {prg flag 2} {...}} - lappend program $flagsprg; + lappend program $flagsprg # put the other regular stuff - lappend program $res; - set inflags 0; - set empty 0; + lappend program $res + set inflags 0 + set empty 0 } } else { if {$state == "flags"} { - set inflags 1; + set inflags 1 # sub program counter + first sub program - set flagsprg [list [list "P" 1] $res]; + set flagsprg [list [list "P" 1] $res] } else { - lappend program $res; - set empty 0; + lappend program $res + set empty 0 } } } @@ -198,32 +198,32 @@ proc ::tcl::OptKeyRegister {desc {key ""}} { if {$empty} { # We just have the subprogram, optimize and remove # unneeded level: - set program $flagsprg; + set program $flagsprg } else { - lappend program $flagsprg; + lappend program $flagsprg } } - set OptDesc($key) $program; + set OptDesc($key) $program - return $key; + return $key } # # Free the storage for that given key # proc ::tcl::OptKeyDelete {key} { - variable OptDesc; - unset OptDesc($key); + variable OptDesc + unset OptDesc($key) } # Get the parsed description stored under the given key. proc OptKeyGetDesc {descKey} { - variable OptDesc; + variable OptDesc if {![info exists OptDesc($descKey)]} { - return -code error "Unknown option description key \"$descKey\""; + return -code error "Unknown option description key \"$descKey\"" } - set OptDesc($descKey); + set OptDesc($descKey) } # Parse entry point for ppl who don't want to register with a key, @@ -232,10 +232,10 @@ proc ::tcl::OptKeyDelete {key} { # as it is way faster or simply OptProc which does it all) # Assign a temporary key, call OptKeyParse and then free the storage proc ::tcl::OptParse {desc arglist} { - set tempkey [OptKeyRegister $desc]; - set ret [catch {uplevel 1 [list ::tcl::OptKeyParse $tempkey $arglist]} res]; - OptKeyDelete $tempkey; - return -code $ret $res; + set tempkey [OptKeyRegister $desc] + set ret [catch {uplevel 1 [list ::tcl::OptKeyParse $tempkey $arglist]} res] + OptKeyDelete $tempkey + return -code $ret $res } # Helper function, replacement for proc that both @@ -246,22 +246,22 @@ proc ::tcl::OptParse {desc arglist} { # (the other will be sets to their default value) # into local variable named "Args". proc ::tcl::OptProc {name desc body} { - set namespace [uplevel 1 [list ::namespace current]]; + set namespace [uplevel 1 [list ::namespace current]] if {[string match "::*" $name] || [string equal $namespace "::"]} { # absolute name or global namespace, name is the key - set key $name; + set key $name } else { # we are relative to some non top level namespace: - set key "${namespace}::${name}"; + set key "${namespace}::${name}" } - OptKeyRegister $desc $key; - uplevel 1 [list ::proc $name args "set Args \[::tcl::OptKeyParse $key \$args\]\n$body"]; - return $key; + OptKeyRegister $desc $key + uplevel 1 [list ::proc $name args "set Args \[::tcl::OptKeyParse $key \$args\]\n$body"] + return $key } # Check that a argument has been given # assumes that "OptProc" has been used as it will check in "Args" list proc ::tcl::OptProcArgGiven {argname} { - upvar Args alist; + upvar Args alist expr {[lsearch $alist $argname] >=0} } @@ -270,7 +270,7 @@ proc ::tcl::OptProcArgGiven {argname} { # Return the instruction word/list of a given step/(sub)program proc OptInstr {lst} { - lindex $lst 0; + lindex $lst 0 } # Is a (sub) program or a plain instruction ? proc OptIsPrg {lst} { @@ -286,56 +286,56 @@ proc ::tcl::OptProcArgGiven {argname} { } # Current program counter (2nd word of first word) proc OptSetPrgCounter {lstName newValue} { - upvar $lstName lst; - set lst [lreplace $lst 0 0 [concat "P" $newValue]]; + upvar $lstName lst + set lst [lreplace $lst 0 0 [concat "P" $newValue]] } # returns a list of currently selected items. proc OptSelection {lst} { - set res {}; + set res {} foreach idx [lrange [lindex $lst 0] 1 end] { - lappend res [Lget $lst $idx]; + lappend res [Lget $lst $idx] } - return $res; + return $res } # Advance to next description proc OptNextDesc {descName} { - uplevel 1 [list Lvarincr $descName {0 1}]; + uplevel 1 [list Lvarincr $descName {0 1}] } # Get the current description, eventually descend proc OptCurDesc {descriptions} { - lindex $descriptions [OptGetPrgCounter $descriptions]; + lindex $descriptions [OptGetPrgCounter $descriptions] } # get the current description, eventually descend # through sub programs as needed. proc OptCurDescFinal {descriptions} { - set item [OptCurDesc $descriptions]; + set item [OptCurDesc $descriptions] # Descend untill we get the actual item and not a sub program while {[OptIsPrg $item]} { - set item [OptCurDesc $item]; + set item [OptCurDesc $item] } - return $item; + return $item } # Current final instruction adress proc OptCurAddr {descriptions {start {}}} { - set adress [OptGetPrgCounter $descriptions]; - lappend start $adress; - set item [lindex $descriptions $adress]; + set adress [OptGetPrgCounter $descriptions] + lappend start $adress + set item [lindex $descriptions $adress] if {[OptIsPrg $item]} { - return [OptCurAddr $item $start]; + return [OptCurAddr $item $start] } else { - return $start; + return $start } } # Set the value field of the current instruction proc OptCurSetValue {descriptionsName value} { upvar $descriptionsName descriptions # get the current item full adress - set adress [OptCurAddr $descriptions]; + set adress [OptCurAddr $descriptions] # use the 3th field of the item (see OptValue / OptNewInst) lappend adress 2 - Lvarset descriptions $adress [list 1 $value]; + Lvarset descriptions $adress [list 1 $value] # ^hasBeenSet flag } @@ -343,10 +343,10 @@ proc ::tcl::OptProcArgGiven {argname} { proc OptState {item} { lindex $item 0 } - + # current state proc OptCurState {descriptions} { - OptState [OptCurDesc $descriptions]; + OptState [OptCurDesc $descriptions] } ####### @@ -354,11 +354,11 @@ proc ::tcl::OptProcArgGiven {argname} { # Returns the argument that has to be processed now proc OptCurrentArg {lst} { - lindex $lst 0; + lindex $lst 0 } # Advance to next argument proc OptNextArg {argsName} { - uplevel 1 [list Lvarpop1 $argsName]; + uplevel 1 [list Lvarpop1 $argsName] } ####### @@ -370,49 +370,49 @@ proc ::tcl::OptProcArgGiven {argname} { # eventually eat all the arguments. proc OptDoAll {descriptionsName argumentsName} { upvar $descriptionsName descriptions - upvar $argumentsName arguments; -# puts "entered DoAll"; + upvar $argumentsName arguments +# puts "entered DoAll" # Nb: the places where "state" can be set are tricky to figure # because DoOne sets the state to flagsValue and return -continue # when needed... - set state [OptCurState $descriptions]; + set state [OptCurState $descriptions] # We'll exit the loop in "OptDoOne" or when state is empty. while 1 { - set curitem [OptCurDesc $descriptions]; + set curitem [OptCurDesc $descriptions] # Do subprograms if needed, call ourselves on the sub branch while {[OptIsPrg $curitem]} { OptDoAll curitem arguments -# puts "done DoAll sub"; - # Insert back the results in current tree; +# puts "done DoAll sub" + # Insert back the results in current tree Lvarset1nc descriptions [OptGetPrgCounter $descriptions]\ - $curitem; - OptNextDesc descriptions; - set curitem [OptCurDesc $descriptions]; - set state [OptCurState $descriptions]; + $curitem + OptNextDesc descriptions + set curitem [OptCurDesc $descriptions] + set state [OptCurState $descriptions] } -# puts "state = \"$state\" - arguments=($arguments)"; +# puts "state = \"$state\" - arguments=($arguments)" if {[Lempty $state]} { # Nothing left to do, we are done in this branch: - break; + break } # The following statement can make us terminate/continue # as it use return -code {break, continue, return and error} # codes - OptDoOne descriptions state arguments; + OptDoOne descriptions state arguments # If we are here, no special return code where issued, # we'll step to next instruction : -# puts "new state = \"$state\""; - OptNextDesc descriptions; - set state [OptCurState $descriptions]; +# puts "new state = \"$state\"" + OptNextDesc descriptions + set state [OptCurState $descriptions] } } # Process one step for the state machine, # eventually consuming the current argument. proc OptDoOne {descriptionsName stateName argumentsName} { - upvar $argumentsName arguments; - upvar $descriptionsName descriptions; - upvar $stateName state; + upvar $argumentsName arguments + upvar $descriptionsName descriptions + upvar $stateName state # the special state/instruction "args" eats all # the remaining args (if any) @@ -420,27 +420,27 @@ proc ::tcl::OptProcArgGiven {argname} { if {![Lempty $arguments]} { # If there is no additional arguments, leave the default value # in. - OptCurSetValue descriptions $arguments; - set arguments {}; + OptCurSetValue descriptions $arguments + set arguments {} } # puts "breaking out ('args' state: consuming every reminding args)" - return -code break; + return -code break } if {[Lempty $arguments]} { if {$state == "flags"} { # no argument and no flags : we're done -# puts "returning to previous (sub)prg (no more args)"; - return -code return; +# puts "returning to previous (sub)prg (no more args)" + return -code return } elseif {$state == "optValue"} { set state next; # not used, for debug only # go to next state - return ; + return } else { - return -code error [OptMissingValue $descriptions]; + return -code error [OptMissingValue $descriptions] } } else { - set arg [OptCurrentArg $arguments]; + set arg [OptCurrentArg $arguments] } switch $state { @@ -450,62 +450,62 @@ proc ::tcl::OptProcArgGiven {argname} { # Still a flag ? if {![OptIsFlag $arg]} { # don't consume the argument, return to previous prg - return -code return; + return -code return } # consume the flag - OptNextArg arguments; + OptNextArg arguments if {[string equal "--" $arg]} { # return from 'flags' state - return -code return; + return -code return } - set hits [OptHits descriptions $arg]; + set hits [OptHits descriptions $arg] if {$hits > 1} { return -code error [OptAmbigous $descriptions $arg] } elseif {$hits == 0} { return -code error [OptFlagUsage $descriptions $arg] } - set item [OptCurDesc $descriptions]; + set item [OptCurDesc $descriptions] if {[OptNeedValue $item]} { # we need a value, next state is - set state flagValue; + set state flagValue } else { - OptCurSetValue descriptions 1; + OptCurSetValue descriptions 1 } # continue - return -code continue; + return -code continue } flagValue - value { - set item [OptCurDesc $descriptions]; + set item [OptCurDesc $descriptions] # Test the values against their required type if {[catch {OptCheckType $arg\ [OptType $item] [OptTypeArgs $item]} val]} { return -code error [OptBadValue $item $arg $val] } # consume the value - OptNextArg arguments; + OptNextArg arguments # set the value - OptCurSetValue descriptions $val; + OptCurSetValue descriptions $val # go to next state if {$state == "flagValue"} { set state flags - return -code continue; + return -code continue } else { set state next; # not used, for debug only return ; # will go on next step } } optValue { - set item [OptCurDesc $descriptions]; + set item [OptCurDesc $descriptions] # Test the values against their required type if {![catch {OptCheckType $arg\ [OptType $item] [OptTypeArgs $item]} val]} { # right type, so : # consume the value - OptNextArg arguments; + OptNextArg arguments # set the value - OptCurSetValue descriptions $val; + OptCurSetValue descriptions $val } # go to next state set state next; # not used, for debug only @@ -516,39 +516,39 @@ proc ::tcl::OptProcArgGiven {argname} { # state as been entered ! return -code error "Bug! unknown state in DoOne \"$state\"\ (prg counter [OptGetPrgCounter $descriptions]:\ - [OptCurDesc $descriptions])"; + [OptCurDesc $descriptions])" } # Parse the options given the key to previously registered description # and arguments list proc ::tcl::OptKeyParse {descKey arglist} { - set desc [OptKeyGetDesc $descKey]; + set desc [OptKeyGetDesc $descKey] # make sure -help always give usage if {[string equal -nocase "-help" $arglist]} { - return -code error [OptError "Usage information:" $desc 1]; + return -code error [OptError "Usage information:" $desc 1] } - OptDoAll desc arglist; + OptDoAll desc arglist if {![Lempty $arglist]} { - return -code error [OptTooManyArgs $desc $arglist]; + return -code error [OptTooManyArgs $desc $arglist] } - + # Analyse the result # Walk through the tree: - OptTreeVars $desc "#[expr {[info level]-1}]" ; + OptTreeVars $desc "#[expr {[info level]-1}]" } # determine string length for nice tabulated output proc OptTreeVars {desc level {vnamesLst {}}} { foreach item $desc { - if {[OptIsCounter $item]} continue; + if {[OptIsCounter $item]} continue if {[OptIsPrg $item]} { - set vnamesLst [OptTreeVars $item $level $vnamesLst]; + set vnamesLst [OptTreeVars $item $level $vnamesLst] } else { - set vname [OptVarName $item]; + set vname [OptVarName $item] upvar $level $vname var if {[OptHasBeenSet $item]} { # puts "adding $vname" @@ -556,10 +556,10 @@ proc ::tcl::OptKeyParse {descKey arglist} { # it is more usefull, for instance you can check that # no flags at all was given with expr # {![string match "*-*" $Args]} - lappend vnamesLst [OptName $item]; - set var [OptValue $item]; + lappend vnamesLst [OptName $item] + set var [OptValue $item] } else { - set var [OptDefaultValue $item]; + set var [OptDefaultValue $item] } } } @@ -571,7 +571,7 @@ proc ::tcl::OptKeyParse {descKey arglist} { # and emit an error if arg is not of the correct type # otherwise returns the canonical value of that arg (ie 0/1 for booleans) proc ::tcl::OptCheckType {arg type {typeArgs ""}} { -# puts "checking '$arg' against '$type' ($typeArgs)"; +# puts "checking '$arg' against '$type' ($typeArgs)" # only types "any", "choice", and numbers can have leading "-" @@ -580,7 +580,7 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { if {![string is integer -strict $arg]} { error "not an integer" } - return $arg; + return $arg } float { return [expr {double($arg)}] @@ -591,7 +591,7 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { if {[llength $arg]==0 && [OptIsFlag $arg]} { error "no values with leading -" } - return $arg; + return $arg } boolean { if {![string is boolean -strict $arg]} { @@ -604,10 +604,10 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { if {[lsearch -exact $typeArgs $arg] < 0} { error "invalid choice" } - return $arg; + return $arg } any { - return $arg; + return $arg } string - default { @@ -617,7 +617,7 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { return $arg } } - return neverReached; + return neverReached } # internal utilities @@ -625,34 +625,34 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { # returns the number of flags matching the given arg # sets the (local) prg counter to the list of matches proc OptHits {descName arg} { - upvar $descName desc; + upvar $descName desc set hits 0 set hitems {} - set i 1; + set i 1 - set larg [string tolower $arg]; - set len [string length $larg]; - set last [expr {$len-1}]; + set larg [string tolower $arg] + set len [string length $larg] + set last [expr {$len-1}] foreach item [lrange $desc 1 end] { set flag [OptName $item] # lets try to match case insensitively # (string length ought to be cheap) - set lflag [string tolower $flag]; + set lflag [string tolower $flag] if {$len == [string length $lflag]} { if {[string equal $larg $lflag]} { # Exact match case - OptSetPrgCounter desc $i; - return 1; + OptSetPrgCounter desc $i + return 1 } } elseif {[string equal $larg [string range $lflag 0 $last]]} { - lappend hitems $i; - incr hits; + lappend hitems $i + incr hits } - incr i; + incr i } if {$hits} { - OptSetPrgCounter desc $hitems; + OptSetPrgCounter desc $hitems } return $hits } @@ -660,29 +660,29 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { # Extract fields from the list structure: proc OptName {item} { - lindex $item 1; + lindex $item 1 } proc OptHasBeenSet {item} { - Lget $item {2 0}; + Lget $item {2 0} } proc OptValue {item} { - Lget $item {2 1}; + Lget $item {2 1} } proc OptIsFlag {name} { - string match "-*" $name; + string match "-*" $name } proc OptIsOpt {name} { - string match {\?*} $name; + string match {\?*} $name } proc OptVarName {item} { - set name [OptName $item]; + set name [OptName $item] if {[OptIsFlag $name]} { - return [string range $name 1 end]; + return [string range $name 1 end] } elseif {[OptIsOpt $name]} { - return [string trim $name "?"]; + return [string trim $name "?"] } else { - return $name; + return $name } } proc OptType {item} { @@ -719,13 +719,13 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { proc OptOptUsage {item {what ""}} { return -code error "invalid description format$what: $item\n\ should be a list of {varname|-flagname ?-type? ?defaultvalue?\ - ?helpstring?}"; + ?helpstring?}" } # Generate a canonical form single instruction proc OptNewInst {state varname type typeArgs help} { - list $state $varname [list 0 {}] $type $typeArgs $help; + list $state $varname [list 0 {}] $type $typeArgs $help # ^ ^ # | | # hasBeenSet=+ +=currentValue @@ -733,18 +733,18 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { # Translate one item to canonical form proc OptNormalizeOne {item} { - set lg [Lassign $item varname arg1 arg2 arg3]; -# puts "called optnormalizeone '$item' v=($varname), lg=$lg"; - set isflag [OptIsFlag $varname]; - set isopt [OptIsOpt $varname]; + set lg [Lassign $item varname arg1 arg2 arg3] +# puts "called optnormalizeone '$item' v=($varname), lg=$lg" + set isflag [OptIsFlag $varname] + set isopt [OptIsOpt $varname] if {$isflag} { - set state "flags"; + set state "flags" } elseif {$isopt} { - set state "optValue"; + set state "optValue" } elseif {![string equal $varname "args"]} { - set state "value"; + set state "value" } else { - set state "args"; + set state "args" } # apply 'smart' 'fuzzy' logic to try to make @@ -754,9 +754,9 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { switch $lg { 1 { if {$isflag} { - return [OptNewInst $state $varname boolflag false ""]; + return [OptNewInst $state $varname boolflag false ""] } else { - return [OptNewInst $state $varname any "" ""]; + return [OptNewInst $state $varname any "" ""] } } 2 { @@ -776,20 +776,20 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { set help "" set def $arg1 } - return [OptNewInst $state $varname $type $def $help]; + return [OptNewInst $state $varname $type $def $help] } 3 { # varname type value # varname value comment - + if {[regexp {^-(.+)$} $arg1 x type]} { # flags/optValue as they are optional, need a "value", # on the contrary, for a variable (non optional), # default value is pointless, 'cept for choices : if {$isflag || $isopt || ($type == "choice")} { - return [OptNewInst $state $varname $type $arg2 ""]; + return [OptNewInst $state $varname $type $arg2 ""] } else { - return [OptNewInst $state $varname $type "" $arg2]; + return [OptNewInst $state $varname $type "" $arg2] } } else { return [OptNewInst $state $varname\ @@ -798,13 +798,13 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { } 4 { if {[regexp {^-(.+)$} $arg1 x type]} { - return [OptNewInst $state $varname $type $arg2 $arg3]; + return [OptNewInst $state $varname $type $arg2 $arg3] } else { - return -code error [OptOptUsage $item]; + return -code error [OptOptUsage $item] } } default { - return -code error [OptOptUsage $item]; + return -code error [OptOptUsage $item] } } } @@ -829,7 +829,7 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { OptError "ambigous option \"$arg\", choose from:" [OptSelection $desc] } proc OptFlagUsage {desc arg} { - OptError "bad flag \"$arg\", must be one of" $desc; + OptError "bad flag \"$arg\", must be one of" $desc } proc OptTooManyArgs {desc arguments} { OptError "too many arguments (unexpected argument(s): $arguments),\ @@ -838,45 +838,45 @@ proc ::tcl::OptCheckType {arg type {typeArgs ""}} { } proc OptParamType {item} { if {[OptIsFlag $item]} { - return "flag"; + return "flag" } else { - return "parameter"; + return "parameter" } } proc OptBadValue {item arg {err {}}} { -# puts "bad val err = \"$err\""; +# puts "bad val err = \"$err\"" OptError "bad value \"$arg\" for [OptParamType $item]"\ [list $item] } proc OptMissingValue {descriptions} { -# set item [OptCurDescFinal $descriptions]; - set item [OptCurDesc $descriptions]; +# set item [OptCurDescFinal $descriptions] + set item [OptCurDesc $descriptions] OptError "no value given for [OptParamType $item] \"[OptName $item]\"\ (use -help for full usage) :"\ [list $item] } proc ::tcl::OptKeyError {prefix descKey {header 0}} { - OptError $prefix [OptKeyGetDesc $descKey] $header; + OptError $prefix [OptKeyGetDesc $descKey] $header } # determine string length for nice tabulated output proc OptLengths {desc nlName tlName dlName} { - upvar $nlName nl; - upvar $tlName tl; - upvar $dlName dl; + upvar $nlName nl + upvar $tlName tl + upvar $dlName dl foreach item $desc { - if {[OptIsCounter $item]} continue; + if {[OptIsCounter $item]} continue if {[OptIsPrg $item]} { OptLengths $item nl tl dl } else { SetMax nl [string length [OptName $item]] SetMax tl [string length [OptType $item]] - set dv [OptTypeArgs $item]; + set dv [OptTypeArgs $item] if {[OptState $item] != "header"} { - set dv "($dv)"; + set dv "($dv)" } - set l [string length $dv]; + set l [string length $dv] # limit the space allocated to potentially big "choices" if {([OptType $item] != "choice") || ($l<=12)} { SetMax dl $l @@ -890,22 +890,22 @@ proc ::tcl::OptKeyError {prefix descKey {header 0}} { } # output the tree proc OptTree {desc nl tl dl} { - set res ""; + set res "" foreach item $desc { - if {[OptIsCounter $item]} continue; + if {[OptIsCounter $item]} continue if {[OptIsPrg $item]} { - append res [OptTree $item $nl $tl $dl]; + append res [OptTree $item $nl $tl $dl] } else { - set dv [OptTypeArgs $item]; + set dv [OptTypeArgs $item] if {[OptState $item] != "header"} { - set dv "($dv)"; + set dv "($dv)" } - append res [format "\n %-*s %-*s %-*s %s" \ + append res [string trimright [format "\n %-*s %-*s %-*s %s" \ $nl [OptName $item] $tl [OptType $item] \ - $dl $dv [OptHelp $item]] + $dl $dv [OptHelp $item]]] } } - return $res; + return $res } # Give nice usage string @@ -913,13 +913,13 @@ proc ::tcl::OptError {prefix desc {header 0}} { # determine length if {$header} { # add faked instruction - set h [list [OptNewInst header Var/FlagName Type Value Help]]; - lappend h [OptNewInst header ------------ ---- ----- ----]; - lappend h [OptNewInst header {( -help} "" "" {gives this help )}] + set h [list [OptNewInst header Var/FlagName Type Value Help]] + lappend h [OptNewInst header ------------ ---- ----- ----] + lappend h [OptNewInst header {(-help} "" "" {gives this help)}] set desc [concat $h $desc] } OptLengths $desc nl tl dl - # actually output + # actually output return "$prefix[OptTree $desc $nl $tl $dl]" } @@ -943,105 +943,105 @@ proc ::tcl::Lempty {list} { # Gets the value of one leaf of a lists tree proc ::tcl::Lget {list indexLst} { if {[llength $indexLst] <= 1} { - return [lindex $list $indexLst]; + return [lindex $list $indexLst] } - Lget [lindex $list [lindex $indexLst 0]] [lrange $indexLst 1 end]; + Lget [lindex $list [lindex $indexLst 0]] [lrange $indexLst 1 end] } # Sets the value of one leaf of a lists tree # (we use the version that does not create the elements because # it would be even slower... needs to be written in C !) # (nb: there is a non trivial recursive problem with indexes 0, # which appear because there is no difference between a list -# of 1 element and 1 element alone : [list "a"] == "a" while +# of 1 element and 1 element alone : [list "a"] == "a" while # it should be {a} and [listp a] should be 0 while [listp {a b}] would be 1 # and [listp "a b"] maybe 0. listp does not exist either...) proc ::tcl::Lvarset {listName indexLst newValue} { - upvar $listName list; + upvar $listName list if {[llength $indexLst] <= 1} { - Lvarset1nc list $indexLst $newValue; + Lvarset1nc list $indexLst $newValue } else { - set idx [lindex $indexLst 0]; - set targetList [lindex $list $idx]; + set idx [lindex $indexLst 0] + set targetList [lindex $list $idx] # reduce refcount on targetList (not really usefull now, # could be with optimizing compiler) -# Lvarset1 list $idx {}; +# Lvarset1 list $idx {} # recursively replace in targetList - Lvarset targetList [lrange $indexLst 1 end] $newValue; + Lvarset targetList [lrange $indexLst 1 end] $newValue # put updated sub list back in the tree - Lvarset1nc list $idx $targetList; + Lvarset1nc list $idx $targetList } } # Set one cell to a value, eventually create all the needed elements # (on level-1 of lists) variable emptyList {} proc ::tcl::Lvarset1 {listName index newValue} { - upvar $listName list; + upvar $listName list if {$index < 0} {return -code error "invalid negative index"} - set lg [llength $list]; + set lg [llength $list] if {$index >= $lg} { - variable emptyList; + variable emptyList for {set i $lg} {$i<$index} {incr i} { - lappend list $emptyList; + lappend list $emptyList } - lappend list $newValue; + lappend list $newValue } else { - set list [lreplace $list $index $index $newValue]; + set list [lreplace $list $index $index $newValue] } } # same as Lvarset1 but no bound checking / creation proc ::tcl::Lvarset1nc {listName index newValue} { - upvar $listName list; - set list [lreplace $list $index $index $newValue]; + upvar $listName list + set list [lreplace $list $index $index $newValue] } # Increments the value of one leaf of a lists tree # (which must exists) proc ::tcl::Lvarincr {listName indexLst {howMuch 1}} { - upvar $listName list; + upvar $listName list if {[llength $indexLst] <= 1} { - Lvarincr1 list $indexLst $howMuch; + Lvarincr1 list $indexLst $howMuch } else { - set idx [lindex $indexLst 0]; - set targetList [lindex $list $idx]; + set idx [lindex $indexLst 0] + set targetList [lindex $list $idx] # reduce refcount on targetList - Lvarset1nc list $idx {}; + Lvarset1nc list $idx {} # recursively replace in targetList - Lvarincr targetList [lrange $indexLst 1 end] $howMuch; + Lvarincr targetList [lrange $indexLst 1 end] $howMuch # put updated sub list back in the tree - Lvarset1nc list $idx $targetList; + Lvarset1nc list $idx $targetList } } # Increments the value of one cell of a list proc ::tcl::Lvarincr1 {listName index {howMuch 1}} { - upvar $listName list; - set newValue [expr {[lindex $list $index]+$howMuch}]; - set list [lreplace $list $index $index $newValue]; - return $newValue; + upvar $listName list + set newValue [expr {[lindex $list $index]+$howMuch}] + set list [lreplace $list $index $index $newValue] + return $newValue } # Removes the first element of a list # and returns the new list value proc ::tcl::Lvarpop1 {listName} { - upvar $listName list; - set list [lrange $list 1 end]; + upvar $listName list + set list [lrange $list 1 end] } # Same but returns the removed element # (Like the tclX version) proc ::tcl::Lvarpop {listName} { - upvar $listName list; - set el [lindex $list 0]; - set list [lrange $list 1 end]; - return $el; + upvar $listName list + set el [lindex $list 0] + set list [lrange $list 1 end] + return $el } # Assign list elements to variables and return the length of the list proc ::tcl::Lassign {list args} { # faster than direct blown foreach (which does not byte compile) - set i 0; - set lg [llength $list]; + set i 0 + set lg [llength $list] foreach vname $args { if {$i>=$lg} break - uplevel 1 [list ::set $vname [lindex $list $i]]; - incr i; + uplevel 1 [list ::set $vname [lindex $list $i]] + incr i } - return $lg; + return $lg } # Misc utilities diff --git a/library/opt/pkgIndex.tcl b/library/opt/pkgIndex.tcl index c5d3635..107d4c6 100644 --- a/library/opt/pkgIndex.tcl +++ b/library/opt/pkgIndex.tcl @@ -9,4 +9,4 @@ # full path name of this file's directory. if {![package vsatisfies [package provide Tcl] 8.2]} {return} -package ifneeded opt 0.4.5 [list source [file join $dir optparse.tcl]] +package ifneeded opt 0.4.6 [list source [file join $dir optparse.tcl]] diff --git a/library/package.tcl b/library/package.tcl index 3831822..c30431c 100644 --- a/library/package.tcl +++ b/library/package.tcl @@ -14,9 +14,9 @@ namespace eval tcl::Pkg {} # ::tcl::Pkg::CompareExtension -- # -# Used internally by pkg_mkIndex to compare the extension of a file to -# a given extension. On Windows, it uses a case-insensitive comparison -# because the file system can be file insensitive. +# Used internally by pkg_mkIndex to compare the extension of a file to a given +# extension. On Windows, it uses a case-insensitive comparison because the +# file system can be file insensitive. # # Arguments: # fileName name of a file whose extension is compared @@ -27,7 +27,7 @@ namespace eval tcl::Pkg {} # Results: # Returns 1 if the extension matches, 0 otherwise -proc tcl::Pkg::CompareExtension { fileName {ext {}} } { +proc tcl::Pkg::CompareExtension {fileName {ext {}}} { global tcl_platform if {$ext eq ""} {set ext [info sharedlibextension]} if {$tcl_platform(platform) eq "windows"} { @@ -40,7 +40,7 @@ proc tcl::Pkg::CompareExtension { fileName {ext {}} } { set currExt [file extension $root] if {$currExt eq $ext} { return 1 - } + } # The current extension does not match; if it is not a numeric # value, quit, as we are only looking to ignore version number @@ -48,7 +48,7 @@ proc tcl::Pkg::CompareExtension { fileName {ext {}} } { # tcl::Pkg::CompareExtension foo.so.bar .so # which should not match. - if { ![string is integer -strict [string range $currExt 1 end]] } { + if {![string is integer -strict [string range $currExt 1 end]]} { return 0 } set root [file rootname $root] @@ -57,11 +57,10 @@ proc tcl::Pkg::CompareExtension { fileName {ext {}} } { } # pkg_mkIndex -- -# This procedure creates a package index in a given directory. The -# package index consists of a "pkgIndex.tcl" file whose contents are -# a Tcl script that sets up package information with "package require" -# commands. The commands describe all of the packages defined by the -# files given as arguments. +# This procedure creates a package index in a given directory. The package +# index consists of a "pkgIndex.tcl" file whose contents are a Tcl script that +# sets up package information with "package require" commands. The commands +# describe all of the packages defined by the files given as arguments. # # Arguments: # -direct (optional) If this flag is present, the generated @@ -82,7 +81,7 @@ proc tcl::Pkg::CompareExtension { fileName {ext {}} } { # dir. proc pkg_mkIndex {args} { - set usage {"pkg_mkIndex ?-direct? ?-lazy? ?-load pattern? ?-verbose? ?--? dir ?pattern ...?"}; + set usage {"pkg_mkIndex ?-direct? ?-lazy? ?-load pattern? ?-verbose? ?--? dir ?pattern ...?"} set argCount [llength $args] if {$argCount < 1} { @@ -128,20 +127,21 @@ proc pkg_mkIndex {args} { set dir [lindex $args $idx] set patternList [lrange $args [expr {$idx + 1}] end] - if {[llength $patternList] == 0} { + if {![llength $patternList]} { set patternList [list "*.tcl" "*[info sharedlibextension]"] } - if {[catch { - glob -directory $dir -tails -types {r f} -- {*}$patternList - } fileList o]} { - return -options $o $fileList + try { + set fileList [glob -directory $dir -tails -types {r f} -- \ + {*}$patternList] + } on error {msg opt} { + return -options $opt $msg } foreach file $fileList { # For each file, figure out what commands and packages it provides. # To do this, create a child interpreter, load the file into the - # interpreter, and get a list of the new commands and packages - # that are defined. + # interpreter, and get a list of the new commands and packages that + # are defined. if {$file eq "pkgIndex.tcl"} { continue @@ -163,20 +163,23 @@ proc pkg_mkIndex {args} { } } foreach pkg [info loaded] { - if {! [string match -nocase $loadPat [lindex $pkg 1]]} { + if {![string match -nocase $loadPat [lindex $pkg 1]]} { continue } if {$doVerbose} { tclLog "package [lindex $pkg 1] matches '$loadPat'" } - if {[catch { + try { load [lindex $pkg 0] [lindex $pkg 1] $c - } err]} { + } on error err { if {$doVerbose} { - tclLog "warning: load [lindex $pkg 0] [lindex $pkg 1]\nfailed with: $err" + tclLog "warning: load [lindex $pkg 0]\ + [lindex $pkg 1]\nfailed with: $err" + } + } on ok {} { + if {$doVerbose} { + tclLog "loaded [lindex $pkg 0] [lindex $pkg 1]" } - } elseif {$doVerbose} { - tclLog "loaded [lindex $pkg 0] [lindex $pkg 1]" } if {[lindex $pkg 1] eq "Tk"} { # Withdraw . if Tk was loaded, to avoid showing a window. @@ -185,21 +188,25 @@ proc pkg_mkIndex {args} { } $c eval { - # Stub out the package command so packages can - # require other packages. + # Stub out the package command so packages can require other + # packages. rename package __package_orig proc package {what args} { switch -- $what { - require { return ; # ignore transitive requires } - default { __package_orig $what {*}$args } + require { + return; # Ignore transitive requires + } + default { + __package_orig $what {*}$args + } } } proc tclPkgUnknown args {} package unknown tclPkgUnknown - # Stub out the unknown command so package can call - # into each other during their initialilzation. + # Stub out the unknown command so package can call into each other + # during their initialilzation. proc unknown {args} {} @@ -207,9 +214,9 @@ proc pkg_mkIndex {args} { proc auto_import {args} {} - # reserve the ::tcl namespace for support procs - # and temporary variables. This might make it awkward - # to generate a pkgIndex.tcl file for the ::tcl namespace. + # reserve the ::tcl namespace for support procs and temporary + # variables. This might make it awkward to generate a + # pkgIndex.tcl file for the ::tcl namespace. namespace eval ::tcl { variable dir ;# Current directory being processed @@ -230,22 +237,22 @@ proc pkg_mkIndex {args} { $c eval [list set ::tcl::file $file] $c eval [list set ::tcl::direct $direct] - # Download needed procedures into the slave because we've - # just deleted the unknown procedure. This doesn't handle - # procedures with default arguments. + # Download needed procedures into the slave because we've just deleted + # the unknown procedure. This doesn't handle procedures with default + # arguments. foreach p {::tcl::Pkg::CompareExtension} { $c eval [list namespace eval [namespace qualifiers $p] {}] $c eval [list proc $p [info args $p] [info body $p]] } - if {[catch { + try { $c eval { set ::tcl::debug "loading or sourcing" - # we need to track command defined by each package even in - # the -direct case, because they are needed internally by - # the "partial pkgIndex.tcl" step above. + # we need to track command defined by each package even in the + # -direct case, because they are needed internally by the + # "partial pkgIndex.tcl" step above. proc ::tcl::GetAllNamespaces {{root ::}} { set list $root @@ -267,18 +274,17 @@ proc pkg_mkIndex {args} { } set ::tcl::origCmds [info commands] - # Try to load the file if it has the shared library - # extension, otherwise source it. It's important not to - # try to load files that aren't shared libraries, because - # on some systems (like SunOS) the loader will abort the - # whole application when it gets an error. + # Try to load the file if it has the shared library extension, + # otherwise source it. It's important not to try to load + # files that aren't shared libraries, because on some systems + # (like SunOS) the loader will abort the whole application + # when it gets an error. if {[::tcl::Pkg::CompareExtension $::tcl::file [info sharedlibextension]]} { - # The "file join ." command below is necessary. - # Without it, if the file name has no \'s and we're - # on UNIX, the load command will invoke the - # LD_LIBRARY_PATH search mechanism, which could cause - # the wrong file to be used. + # The "file join ." command below is necessary. Without + # it, if the file name has no \'s and we're on UNIX, the + # load command will invoke the LD_LIBRARY_PATH search + # mechanism, which could cause the wrong file to be used. set ::tcl::debug loading load [file join $::tcl::dir $::tcl::file] @@ -289,22 +295,21 @@ proc pkg_mkIndex {args} { set ::tcl::type source } - # As a performance optimization, if we are creating - # direct load packages, don't bother figuring out the - # set of commands created by the new packages. We - # only need that list for setting up the autoloading - # used in the non-direct case. - if { !$::tcl::direct } { + # As a performance optimization, if we are creating direct + # load packages, don't bother figuring out the set of commands + # created by the new packages. We only need that list for + # setting up the autoloading used in the non-direct case. + if {!$::tcl::direct} { # See what new namespaces appeared, and import commands # from them. Only exported commands go into the index. - + foreach ::tcl::x [::tcl::GetAllNamespaces] { - if {! [info exists ::tcl::namespaces($::tcl::x)]} { + if {![info exists ::tcl::namespaces($::tcl::x)]} { namespace import -force ${::tcl::x}::* } # Figure out what commands appeared - + foreach ::tcl::x [info commands] { set ::tcl::newCmds($::tcl::x) 1 } @@ -313,18 +318,19 @@ proc pkg_mkIndex {args} { } foreach ::tcl::x [array names ::tcl::newCmds] { # determine which namespace a command comes from - + set ::tcl::abs [namespace origin $::tcl::x] - - # special case so that global names have no leading - # ::, this is required by the unknown command - + + # special case so that global names have no + # leading ::, this is required by the unknown + # command + set ::tcl::abs \ [lindex [auto_qualify $::tcl::abs ::] 0] - + if {$::tcl::x ne $::tcl::abs} { # Name changed during qualification - + set ::tcl::newCmds($::tcl::abs) 1 unset ::tcl::newCmds($::tcl::x) } @@ -332,8 +338,8 @@ proc pkg_mkIndex {args} { } } - # Look through the packages that appeared, and if there is - # a version provided, then record it + # Look through the packages that appeared, and if there is a + # version provided, then record it foreach ::tcl::x [package names] { if {[package provide $::tcl::x] ne "" @@ -343,12 +349,12 @@ proc pkg_mkIndex {args} { } } } - } msg] == 1} { + } on error msg { set what [$c eval set ::tcl::debug] if {$doVerbose} { tclLog "warning: error while $what $file: $msg" } - } else { + } on ok {} { set what [$c eval set ::tcl::debug] if {$doVerbose} { tclLog "successful $what of $file" @@ -357,7 +363,7 @@ proc pkg_mkIndex {args} { set cmds [lsort [$c eval array names ::tcl::newCmds]] set pkgs [$c eval set ::tcl::newPkgs] if {$doVerbose} { - if { !$direct } { + if {!$direct} { tclLog "commands provided were $cmds" } tclLog "packages provided were $pkgs" @@ -395,7 +401,7 @@ proc pkg_mkIndex {args} { lappend cmd ::tcl::Pkg::Create -name $name -version $version foreach spec [lsort -index 0 $files($pkg)] { foreach {file type procs} $spec { - if { $direct } { + if {$direct} { set procs {} } lappend cmd "-$type" [list $file $procs] @@ -410,11 +416,10 @@ proc pkg_mkIndex {args} { } # tclPkgSetup -- -# This is a utility procedure use by pkgIndex.tcl files. It is invoked -# as part of a "package ifneeded" script. It calls "package provide" -# to indicate that a package is available, then sets entries in the -# auto_index array so that the package's files will be auto-loaded when -# the commands are used. +# This is a utility procedure use by pkgIndex.tcl files. It is invoked as +# part of a "package ifneeded" script. It calls "package provide" to indicate +# that a package is available, then sets entries in the auto_index array so +# that the package's files will be auto-loaded when the commands are used. # # Arguments: # dir - Directory containing all the files for this package. @@ -439,18 +444,18 @@ proc tclPkgSetup {dir pkg version files} { set auto_index($cmd) [list load [file join $dir $f] $pkg] } else { set auto_index($cmd) [list source [file join $dir $f]] - } + } } } } # tclPkgUnknown -- -# This procedure provides the default for the "package unknown" function. -# It is invoked when a package that's needed can't be found. It scans -# the auto_path directories and their immediate children looking for -# pkgIndex.tcl files and sources any such files that are found to setup -# the package database. As it searches, it will recognize changes -# to the auto_path and scan any new directories. +# This procedure provides the default for the "package unknown" function. It +# is invoked when a package that's needed can't be found. It scans the +# auto_path directories and their immediate children looking for pkgIndex.tcl +# files and sources any such files that are found to setup the package +# database. As it searches, it will recognize changes to the auto_path and +# scan any new directories. # # Arguments: # name - Name of desired package. Not used. @@ -463,12 +468,12 @@ proc tclPkgUnknown {name args} { if {![info exists auto_path]} { return } - # Cache the auto_path, because it may change while we run through - # the first set of pkgIndex.tcl files + # Cache the auto_path, because it may change while we run through the + # first set of pkgIndex.tcl files set old_path [set use_path $auto_path] while {[llength $use_path]} { set dir [lindex $use_path end] - + # Make sure we only scan each directory one time. if {[info exists tclSeenPath($dir)]} { set use_path [lrange $use_path 0 end-1] @@ -476,24 +481,22 @@ proc tclPkgUnknown {name args} { } set tclSeenPath($dir) 1 - # we can't use glob in safe interps, so enclose the following - # in a catch statement, where we get the pkgIndex files out - # of the subdirectories + # we can't use glob in safe interps, so enclose the following in a + # catch statement, where we get the pkgIndex files out of the + # subdirectories catch { foreach file [glob -directory $dir -join -nocomplain \ * pkgIndex.tcl] { set dir [file dirname $file] if {![info exists procdDirs($dir)]} { - set code [catch {source $file} msg opt] - if {$code == 1 && - [lindex [dict get $opt -errorcode] 0] eq "POSIX" && - [lindex [dict get $opt -errorcode] 1] eq "EACCES"} { + try { + source $file + } trap {POSIX EACCES} {} { # $file was not readable; silently ignore continue - } - if {$code} { + } on error msg { tclLog "error reading package index file $file: $msg" - } else { + } on ok {} { set procdDirs($dir) 1 } } @@ -502,18 +505,16 @@ proc tclPkgUnknown {name args} { set dir [lindex $use_path end] if {![info exists procdDirs($dir)]} { set file [file join $dir pkgIndex.tcl] - # safe interps usually don't have "file exists", + # safe interps usually don't have "file exists", if {([interp issafe] || [file exists $file])} { - set code [catch {source $file} msg opt] - if {$code == 1 && - [lindex [dict get $opt -errorcode] 0] eq "POSIX" && - [lindex [dict get $opt -errorcode] 1] eq "EACCES"} { + try { + source $file + } trap {POSIX EACCES} {} { # $file was not readable; silently ignore continue - } - if {$code} { + } on error msg { tclLog "error reading package index file $file: $msg" - } else { + } on ok {} { set procdDirs($dir) 1 } } @@ -521,12 +522,11 @@ proc tclPkgUnknown {name args} { set use_path [lrange $use_path 0 end-1] - # Check whether any of the index scripts we [source]d above - # set a new value for $::auto_path. If so, then find any - # new directories on the $::auto_path, and lappend them to - # the $use_path we are working from. This gives index scripts - # the (arguably unwise) power to expand the index script search - # path while the search is in progress. + # Check whether any of the index scripts we [source]d above set a new + # value for $::auto_path. If so, then find any new directories on the + # $::auto_path, and lappend them to the $use_path we are working from. + # This gives index scripts the (arguably unwise) power to expand the + # index script search path while the search is in progress. set index 0 if {[llength $old_path] == [llength $auto_path]} { foreach dir $auto_path old $old_path { @@ -538,13 +538,13 @@ proc tclPkgUnknown {name args} { } } - # $index now points to the first element of $auto_path that - # has changed, or the beginning if $auto_path has changed length - # Scan the new elements of $auto_path for directories to add to - # $use_path. Don't add directories we've already seen, or ones - # already on the $use_path. + # $index now points to the first element of $auto_path that has + # changed, or the beginning if $auto_path has changed length Scan the + # new elements of $auto_path for directories to add to $use_path. + # Don't add directories we've already seen, or ones already on the + # $use_path. foreach dir [lrange $auto_path $index end] { - if {![info exists tclSeenPath($dir)] + if {![info exists tclSeenPath($dir)] && ([lsearch -exact $use_path $dir] == -1) } { lappend use_path $dir } @@ -554,9 +554,9 @@ proc tclPkgUnknown {name args} { } # tcl::MacOSXPkgUnknown -- -# This procedure extends the "package unknown" function for MacOSX. -# It scans the Resources/Scripts directories of the immediate children -# of the auto_path directories for pkgIndex files. +# This procedure extends the "package unknown" function for MacOSX. It scans +# the Resources/Scripts directories of the immediate children of the auto_path +# directories for pkgIndex files. # # Arguments: # original - original [package unknown] procedure @@ -565,7 +565,6 @@ proc tclPkgUnknown {name args} { # exact - Either "-exact" or omitted. Not used. proc tcl::MacOSXPkgUnknown {original name args} { - # First do the cross-platform default search uplevel 1 $original [linsert $args 0 $name] @@ -575,8 +574,8 @@ proc tcl::MacOSXPkgUnknown {original name args} { if {![info exists auto_path]} { return } - # Cache the auto_path, because it may change while we run through - # the first set of pkgIndex.tcl files + # Cache the auto_path, because it may change while we run through the + # first set of pkgIndex.tcl files set old_path [set use_path $auto_path] while {[llength $use_path]} { set dir [lindex $use_path end] @@ -593,28 +592,25 @@ proc tcl::MacOSXPkgUnknown {original name args} { * Resources Scripts pkgIndex.tcl] { set dir [file dirname $file] if {![info exists procdDirs($dir)]} { - set code [catch {source $file} msg opt] - if {$code == 1 && - [lindex [dict get $opt -errorcode] 0] eq "POSIX" && - [lindex [dict get $opt -errorcode] 1] eq "EACCES"} { + try { + source $file + } trap {POSIX EACCES} {} { # $file was not readable; silently ignore continue - } - if {$code} { + } on error msg { tclLog "error reading package index file $file: $msg" - } else { + } on ok {} { set procdDirs($dir) 1 } } } set use_path [lrange $use_path 0 end-1] - # Check whether any of the index scripts we [source]d above - # set a new value for $::auto_path. If so, then find any - # new directories on the $::auto_path, and lappend them to - # the $use_path we are working from. This gives index scripts - # the (arguably unwise) power to expand the index script search - # path while the search is in progress. + # Check whether any of the index scripts we [source]d above set a new + # value for $::auto_path. If so, then find any new directories on the + # $::auto_path, and lappend them to the $use_path we are working from. + # This gives index scripts the (arguably unwise) power to expand the + # index script search path while the search is in progress. set index 0 if {[llength $old_path] == [llength $auto_path]} { foreach dir $auto_path old $old_path { @@ -626,13 +622,13 @@ proc tcl::MacOSXPkgUnknown {original name args} { } } - # $index now points to the first element of $auto_path that - # has changed, or the beginning if $auto_path has changed length - # Scan the new elements of $auto_path for directories to add to - # $use_path. Don't add directories we've already seen, or ones - # already on the $use_path. + # $index now points to the first element of $auto_path that has + # changed, or the beginning if $auto_path has changed length Scan the + # new elements of $auto_path for directories to add to $use_path. + # Don't add directories we've already seen, or ones already on the + # $use_path. foreach dir [lrange $auto_path $index end] { - if {![info exists tclSeenPath($dir)] + if {![info exists tclSeenPath($dir)] && ([lsearch -exact $use_path $dir] == -1) } { lappend use_path $dir } @@ -657,12 +653,12 @@ proc tcl::MacOSXPkgUnknown {original name args} { # # Any number of -load and -source parameters may be # specified, so long as there is at least one -load or -# -source parameter. If the procs component of a -# module specifier is left off, that module will be -# set up for direct loading; otherwise, it will be -# set up for lazy loading. If both -source and -load -# are specified, the -load'ed files will be loaded -# first, followed by the -source'd files. +# -source parameter. If the procs component of a module +# specifier is left off, that module will be set up for +# direct loading; otherwise, it will be set up for lazy +# loading. If both -source and -load are specified, the +# -load'ed files will be loaded first, followed by the +# -source'd files. # # Results: # An appropriate "package ifneeded" statement for the package. @@ -680,10 +676,10 @@ proc ::tcl::Pkg::Create {args} { # process arguments set len [llength $args] - if { $len < 6 } { + if {$len < 6} { error $err(wrongNumArgs) } - + # Initialize parameters set opts(-name) {} set opts(-version) {} @@ -697,14 +693,14 @@ proc ::tcl::Pkg::Create {args} { switch -glob -- $flag { "-name" - "-version" { - if { $i >= $len } { + if {$i >= $len} { error [format $err(valueMissing) $flag] } set opts($flag) [lindex $args $i] } "-source" - "-load" { - if { $i >= $len } { + if {$i >= $len} { error [format $err(valueMissing) $flag] } lappend opts($flag) [lindex $args $i] @@ -716,20 +712,20 @@ proc ::tcl::Pkg::Create {args} { } # Validate the parameters - if { [llength $opts(-name)] == 0 } { + if {![llength $opts(-name)]} { error [format $err(valueMissing) "-name"] } - if { [llength $opts(-version)] == 0 } { + if {![llength $opts(-version)]} { error [format $err(valueMissing) "-version"] } - - if { [llength $opts(-source)] == 0 && [llength $opts(-load)] == 0 } { + + if {!([llength $opts(-source)] || [llength $opts(-load)])} { error $err(noLoadOrSource) } # OK, now everything is good. Generate the package ifneeded statment. set cmdline "package ifneeded $opts(-name) $opts(-version) " - + set cmdList {} set lazyFileList {} @@ -742,8 +738,8 @@ proc ::tcl::Pkg::Create {args} { foreach {filename proclist} $filespec { break } - - if { [llength $proclist] == 0 } { + + if {![llength $proclist]} { set cmd "\[list $key \[file join \$dir [list $filename]\]\]" lappend cmdList $cmd } else { @@ -752,7 +748,7 @@ proc ::tcl::Pkg::Create {args} { } } - if { [llength $lazyFileList] > 0 } { + if {[llength $lazyFileList]} { lappend cmdList "\[list tclPkgSetup \$dir $opts(-name)\ $opts(-version) [list $lazyFileList]\]" } @@ -760,4 +756,4 @@ proc ::tcl::Pkg::Create {args} { return $cmdline } -interp alias {} ::pkg::create {} ::tcl::Pkg::Create +interp alias {} ::pkg::create {} ::tcl::Pkg::Create diff --git a/library/reg/pkgIndex.tcl b/library/reg/pkgIndex.tcl index 6fa8eda..067425f 100755 --- a/library/reg/pkgIndex.tcl +++ b/library/reg/pkgIndex.tcl @@ -1,9 +1,9 @@ -if {![package vsatisfies [package provide Tcl] 8]} return +if {![package vsatisfies [package provide Tcl] 8.5]} return if {[string compare [info sharedlibextension] .dll]} return -if {[info exists ::tcl_platform(debug)]} { - package ifneeded registry 1.2.1 \ - [list load [file join $dir tclreg12g.dll] registry] +if {[::tcl::pkgconfig get debug]} { + package ifneeded registry 1.3 \ + [list load [file join $dir tclreg13g.dll] registry] } else { - package ifneeded registry 1.2.1 \ - [list load [file join $dir tclreg12.dll] registry] + package ifneeded registry 1.3 \ + [list load [file join $dir tclreg13.dll] registry] } diff --git a/library/safe.tcl b/library/safe.tcl index 8a99032..95db3b2 100644 --- a/library/safe.tcl +++ b/library/safe.tcl @@ -4,7 +4,7 @@ # It implements a virtual path mecanism to hide the real pathnames from the # slave. It runs in a master interpreter and sets up data structure and # aliases that will be invoked when used from a slave interpreter. -# +# # See the safe.n man page for details. # # Copyright (c) 1996-1997 Sun Microsystems, Inc. @@ -36,7 +36,7 @@ proc ::safe::InterpStatics {} { upvar $v $v } set flag [::tcl::OptProcArgGiven -noStatics] - if {$flag && (!$noStatics == !$statics) + if {$flag && (!$noStatics == !$statics) && ([::tcl::OptProcArgGiven -statics])} { return -code error\ "conflicting values given for -statics and -noStatics" @@ -57,7 +57,7 @@ proc ::safe::InterpNested {} { set flag [::tcl::OptProcArgGiven -nestedLoadOk] # note that the test here is the opposite of the "InterpStatics" one # (it is not -noNested... because of the wanted default value) - if {$flag && (!$nestedLoadOk != !$nested) + if {$flag && (!$nestedLoadOk != !$nested) && ([::tcl::OptProcArgGiven -nested])} { return -code error\ "conflicting values given for -nested and -nestedLoadOk" @@ -151,10 +151,18 @@ proc ::safe::interpConfigure {args} { set item [::tcl::OptCurDesc $desc] set name [::tcl::OptName $item] switch -exact -- $name { - -accessPath {return [list -accessPath $state(access_path)]} - -statics {return [list -statics $state(staticsok)]} - -nested {return [list -nested $state(nestedok)]} - -deleteHook {return [list -deleteHook $state(cleanupHook)]} + -accessPath { + return [list -accessPath $state(access_path)] + } + -statics { + return [list -statics $state(staticsok)] + } + -nested { + return [list -nested $state(nestedok)] + } + -deleteHook { + return [list -deleteHook $state(cleanupHook)] + } -noStatics { # it is most probably a set in fact but we would need # then to jump to the set part and it is not *sure* @@ -192,7 +200,7 @@ proc ::safe::interpConfigure {args} { if { ![::tcl::OptProcArgGiven -statics] && ![::tcl::OptProcArgGiven -noStatics] - } { + } then { set statics $state(staticsok) } else { set statics [InterpStatics] @@ -200,7 +208,7 @@ proc ::safe::interpConfigure {args} { if { [::tcl::OptProcArgGiven -nested] || [::tcl::OptProcArgGiven -nestedLoadOk] - } { + } then { set nested [InterpNested] } else { set nested $state(nestedok) @@ -238,7 +246,7 @@ proc ::safe::interpConfigure {args} { # # Returns the slave name. # -# Optional Arguments : +# Optional Arguments : # + slave name : if empty, generated name will be used # + access_path: path list controlling where load/source can occur, # if empty: the master auto_path will be used. @@ -249,7 +257,7 @@ proc ::safe::interpConfigure {args} { # use the full name and no indent so auto_mkIndex can find us proc ::safe::InterpCreate { - slave + slave access_path staticsok nestedok @@ -424,7 +432,7 @@ proc ::safe::interpAddToAccessPath {slave path} { # interpreter. It is useful when you want to install the safe base aliases # into a preexisting safe interpreter. proc ::safe::InterpInit { - slave + slave access_path staticsok nestedok @@ -537,9 +545,9 @@ proc ::safe::interpDelete {slave} { # remove the hook now, otherwise if the hook calls us somehow, # we'll loop unset state(cleanupHook) - if {[catch { + try { {*}$hook $slave - } err]} { + } on error err { Log $slave "Delete hook error ($err)" } } @@ -562,7 +570,7 @@ proc ::safe::interpDelete {slave} { return } -# Set (or get) the logging mecanism +# Set (or get) the logging mecanism proc ::safe::setLogCmd {args} { variable Log @@ -657,6 +665,7 @@ proc ::safe::CheckFileName {slave file} { } # AliasGlob is the target of the "glob" alias in safe interpreters. + proc ::safe::AliasGlob {slave args} { Log $slave "GLOB ! $args" NOTICE set cmd {} @@ -720,16 +729,15 @@ proc ::safe::AliasGlob {slave args} { # access path of that slave. Done after basic argument processing so that # we know if -nocomplain is set. if {$got(-directory)} { - if {[catch { + try { set dir [TranslatePath $slave $virtualdir] DirInAccessPath $slave $dir - } msg]} { + } on error msg { Log $slave $msg - if {!$got(-nocomplain)} { - return -code error "permission denied" - } else { + if {$got(-nocomplain)} { return } + return -code error "permission denied" } lappend cmd -directory $dir } @@ -744,14 +752,15 @@ proc ::safe::AliasGlob {slave args} { while {$at < [llength $args]} { set opt [lindex $args $at] incr at - if {[regexp $dirPartRE $opt -> thedir] && [catch { - set thedir [file join $virtualdir $thedir] - DirInAccessPath $slave [TranslatePath $slave $thedir] - } msg]} { - Log $slave $msg - if {$got(-nocomplain)} { - continue - } else { + if {[regexp $dirPartRE $opt -> thedir]} { + try { + set thedir [file join $virtualdir $thedir] + DirInAccessPath $slave [TranslatePath $slave $thedir] + } on error msg { + Log $slave $msg + if {$got(-nocomplain)} { + continue + } return -code error "permission denied" } } @@ -763,19 +772,19 @@ proc ::safe::AliasGlob {slave args} { if {$got(-nocomplain) && [llength $cmd] eq $firstPattern} { return } - if {[catch { - ::interp invokehidden $slave glob {*}$cmd - } msg]} { + try { + set entries [::interp invokehidden $slave glob {*}$cmd] + } on error msg { Log $slave $msg return -code error "script error" } - Log $slave "GLOB @ $msg" NOTICE + Log $slave "GLOB @ $entries" NOTICE # Translate path back to what the slave should see. set res {} set l [string length $dir] - foreach p $msg { + foreach p $entries { if {[string equal -length $l $dir $p]} { set p [string replace $p 0 [expr {$l-1}] $virtualdir] } @@ -905,30 +914,28 @@ proc ::safe::AliasLoad {slave file args} { # file loading # get the real path from the virtual one. - if {[catch { + try { set file [TranslatePath $slave $file] - } msg]} { + } on error msg { Log $slave $msg return -code error "permission denied" } # check the translated path - if {[catch { + try { FileInAccessPath $slave $file - } msg]} { + } on error msg { Log $slave $msg return -code error "permission denied (path)" } } - if {[catch { - ::interp invokehidden $slave load $file $package $target - } msg]} { + try { + return [::interp invokehidden $slave load $file $package $target] + } on error msg { Log $slave $msg return -code error $msg } - - return $msg } # FileInAccessPath raises an error if the file is not found in the list of @@ -1008,15 +1015,14 @@ proc ::safe::AliasEncoding {slave option args} { } if {[string equal -length [string length $option] $option "system"]} { - if {[llength $args] == 0} { + if {![llength $args]} { # passed all the tests , lets source it: - if {[catch { - set sysenc [::interp invokehidden $slave encoding system] - } msg]} { + try { + return [::interp invokehidden $slave encoding system] + } on error msg { Log $slave $msg return -code error "script error" } - return $sysenc } set msg "wrong # args: should be \"encoding system\"" set code {TCL WRONGARGS} diff --git a/library/tclIndex b/library/tclIndex index 010616f..26603c1 100644 --- a/library/tclIndex +++ b/library/tclIndex @@ -1,4 +1,5 @@ # Tcl autoload index file, version 2.0 +# -*- tcl -*- # This file is generated by the "auto_mkindex" command # and sourced to set up indexing information for one or # more commands. Typically each line is a command that @@ -48,29 +49,15 @@ set auto_index(::safe::AddSubDirs) [list source [file join $dir safe.tcl]] set auto_index(::safe::interpDelete) [list source [file join $dir safe.tcl]] set auto_index(::safe::setLogCmd) [list source [file join $dir safe.tcl]] set auto_index(::safe::SyncAccessPath) [list source [file join $dir safe.tcl]] -set auto_index(::safe::InterpStateName) [list source [file join $dir safe.tcl]] -set auto_index(::safe::IsInterp) [list source [file join $dir safe.tcl]] set auto_index(::safe::PathToken) [list source [file join $dir safe.tcl]] -set auto_index(::safe::PathListName) [list source [file join $dir safe.tcl]] -set auto_index(::safe::VirtualPathListName) [list source [file join $dir safe.tcl]] -set auto_index(::safe::PathNumberName) [list source [file join $dir safe.tcl]] -set auto_index(::safe::StaticsOkName) [list source [file join $dir safe.tcl]] -set auto_index(::safe::NestedOkName) [list source [file join $dir safe.tcl]] -set auto_index(::safe::Toplevel) [list source [file join $dir safe.tcl]] -set auto_index(::safe::Set) [list source [file join $dir safe.tcl]] -set auto_index(::safe::Lappend) [list source [file join $dir safe.tcl]] -set auto_index(::safe::Unset) [list source [file join $dir safe.tcl]] -set auto_index(::safe::Exists) [list source [file join $dir safe.tcl]] -set auto_index(::safe::GetAccessPath) [list source [file join $dir safe.tcl]] -set auto_index(::safe::StaticsOk) [list source [file join $dir safe.tcl]] -set auto_index(::safe::NestedOk) [list source [file join $dir safe.tcl]] -set auto_index(::safe::DeleteHookName) [list source [file join $dir safe.tcl]] set auto_index(::safe::TranslatePath) [list source [file join $dir safe.tcl]] set auto_index(::safe::Log) [list source [file join $dir safe.tcl]] set auto_index(::safe::CheckFileName) [list source [file join $dir safe.tcl]] +set auto_index(::safe::AliasGlob) [list source [file join $dir safe.tcl]] set auto_index(::safe::AliasSource) [list source [file join $dir safe.tcl]] set auto_index(::safe::AliasLoad) [list source [file join $dir safe.tcl]] set auto_index(::safe::FileInAccessPath) [list source [file join $dir safe.tcl]] +set auto_index(::safe::DirInAccessPath) [list source [file join $dir safe.tcl]] set auto_index(::safe::Subset) [list source [file join $dir safe.tcl]] set auto_index(::safe::AliasSubset) [list source [file join $dir safe.tcl]] set auto_index(::safe::AliasEncoding) [list source [file join $dir safe.tcl]] @@ -82,6 +69,7 @@ set auto_index(tcl_startOfPreviousWord) [list source [file join $dir word.tcl]] set auto_index(::tcl::tm::add) [list source [file join $dir tm.tcl]] set auto_index(::tcl::tm::remove) [list source [file join $dir tm.tcl]] set auto_index(::tcl::tm::list) [list source [file join $dir tm.tcl]] +set auto_index(::tcl::tm::Defaults) [list source [file join $dir tm.tcl]] set auto_index(::tcl::tm::UnknownHandler) [list source [file join $dir tm.tcl]] set auto_index(::tcl::tm::roots) [list source [file join $dir tm.tcl]] set auto_index(::tcl::tm::path) [list source [file join $dir tm.tcl]] diff --git a/library/tm.tcl b/library/tm.tcl index c5db437..ce8a013 100644 --- a/library/tm.tcl +++ b/library/tm.tcl @@ -1,48 +1,44 @@ # -*- tcl -*- # -# Searching for Tcl Modules. Defines a procedure, declares it as the -# primary command for finding packages, however also uses the former -# 'package unknown' command as a fallback. +# Searching for Tcl Modules. Defines a procedure, declares it as the primary +# command for finding packages, however also uses the former 'package unknown' +# command as a fallback. # -# Locates all possible packages in a directory via a less restricted -# glob. The targeted directory is derived from the name of the -# requested package. I.e. the TM scan will look only at directories -# which can contain the requested package. It will register all -# packages it found in the directory so that future requests have a -# higher chance of being fulfilled by the ifneeded database without -# having to come to us again. +# Locates all possible packages in a directory via a less restricted glob. The +# targeted directory is derived from the name of the requested package, i.e. +# the TM scan will look only at directories which can contain the requested +# package. It will register all packages it found in the directory so that +# future requests have a higher chance of being fulfilled by the ifneeded +# database without having to come to us again. # -# We do not remember where we have been and simply rescan targeted -# directories when invoked again. The reasoning is this: +# We do not remember where we have been and simply rescan targeted directories +# when invoked again. The reasoning is this: # -# - The only way we get back to the same directory is if someone is -# trying to [package require] something that wasn't there on the -# first scan. +# - The only way we get back to the same directory is if someone is trying to +# [package require] something that wasn't there on the first scan. # # Either # 1) It is there now: If we rescan, you get it; if not you don't. # -# This covers the possibility that the application asked for a -# package late, and the package was actually added to the -# installation after the application was started. It shoukld -# still be able to find it. +# This covers the possibility that the application asked for a package +# late, and the package was actually added to the installation after the +# application was started. It shoukld still be able to find it. # -# 2) It still is not there: Either way, you don't get it, but the -# rescan takes time. This is however an error case and we dont't -# care that much about it +# 2) It still is not there: Either way, you don't get it, but the rescan +# takes time. This is however an error case and we dont't care that much +# about it # -# 3) It was there the first time; but for some reason a "package -# forget" has been run, and "package" doesn't know about it -# anymore. +# 3) It was there the first time; but for some reason a "package forget" has +# been run, and "package" doesn't know about it anymore. # -# This can be an indication that the application wishes to reload -# some functionality. And should work as well. +# This can be an indication that the application wishes to reload some +# functionality. And should work as well. # -# Note that this also strikes a balance between doing a glob targeting -# a single package, and thus most likely requiring multiple globs of -# the same directory when the application is asking for many packages, -# and trying to glob for _everything_ in all subdirectories when -# looking for a package, which comes with a heavy startup cost. +# Note that this also strikes a balance between doing a glob targeting a +# single package, and thus most likely requiring multiple globs of the same +# directory when the application is asking for many packages, and trying to +# glob for _everything_ in all subdirectories when looking for a package, +# which comes with a heavy startup cost. # # We scan for regular packages only if no satisfying module was found. @@ -71,46 +67,43 @@ namespace eval ::tcl::tm { # path with 'list'. # # Results -# No result for subcommands 'add' and 'remove'. A list of paths -# for 'list'. +# No result for subcommands 'add' and 'remove'. A list of paths for +# 'list'. # # Sideeffects -# The subcommands 'add' and 'remove' manipulate the list of -# paths to search for Tcl Modules. The subcommand 'list' has no -# sideeffects. +# The subcommands 'add' and 'remove' manipulate the list of paths to +# search for Tcl Modules. The subcommand 'list' has no sideeffects. -proc ::tcl::tm::add {path args} { +proc ::tcl::tm::add {args} { # PART OF THE ::tcl::tm::path ENSEMBLE # # The path is added at the head to the list of module paths. # - # The command enforces the restriction that no path may be an - # ancestor directory of any other path on the list. If the new - # path violates this restriction an error wil be raised. + # The command enforces the restriction that no path may be an ancestor + # directory of any other path on the list. If the new path violates this + # restriction an error wil be raised. # - # If the path is already present as is no error will be raised and - # no action will be taken. + # If the path is already present as is no error will be raised and no + # action will be taken. variable paths - # We use a copy of the path as source during validation, and - # extend it as well. Because we not only have to detect if the new - # paths are bogus with respect to the existing paths, but also - # between themselves. Otherwise we can still add bogus paths, by - # specifying them in a single call. This makes the use of the new - # paths simpler as well, a trivial assignment of the collected - # paths to the official state var. + # We use a copy of the path as source during validation, and extend it as + # well. Because we not only have to detect if the new paths are bogus with + # respect to the existing paths, but also between themselves. Otherwise we + # can still add bogus paths, by specifying them in a single call. This + # makes the use of the new paths simpler as well, a trivial assignment of + # the collected paths to the official state var. set newpaths $paths - foreach p [linsert $args 0 $path] { + foreach p $args { if {$p in $newpaths} { # Ignore a path already on the list. continue } - # Search for paths which are subdirectories of the new one. If - # there are any then the new path violates the restriction - # about ancestors. + # Search for paths which are subdirectories of the new one. If there + # are any then the new path violates the restriction about ancestors. set pos [lsearch -glob $newpaths ${p}/*] # Cannot use "in", we need the position for the message. @@ -119,10 +112,9 @@ proc ::tcl::tm::add {path args} { "$p is ancestor of existing module path [lindex $newpaths $pos]." } - # Now look for existing paths which are ancestors of the new - # one. This reverse question forces us to loop over the - # existing paths, as each element is the pattern, not the new - # path :( + # Now look for existing paths which are ancestors of the new one. This + # reverse question forces us to loop over the existing paths, as each + # element is the pattern, not the new path :( foreach ep $newpaths { if {[string match ${ep}/* $p]} { @@ -134,24 +126,23 @@ proc ::tcl::tm::add {path args} { set newpaths [linsert $newpaths 0 $p] } - # The validation of the input is complete and successful, and - # everything in newpaths is either an old path, or added. We can - # now extend the official list of paths, a simple assignment is - # sufficient. + # The validation of the input is complete and successful, and everything + # in newpaths is either an old path, or added. We can now extend the + # official list of paths, a simple assignment is sufficient. set paths $newpaths return } -proc ::tcl::tm::remove {path args} { +proc ::tcl::tm::remove {args} { # PART OF THE ::tcl::tm::path ENSEMBLE # - # Removes the path from the list of module paths. The command is - # silently ignored if the path is not on the list. + # Removes the path from the list of module paths. The command is silently + # ignored if the path is not on the list. variable paths - foreach p [linsert $args 0 $path] { + foreach p $args { set pos [lsearch -exact $paths $p] if {$pos >= 0} { set paths [lreplace $paths $pos $pos] @@ -177,27 +168,26 @@ proc ::tcl::tm::list {} { # empty string. # exact - Either -exact or ommitted. # -# Name, version, and exact are used to determine -# satisfaction. The original is called iff no satisfaction was -# achieved. The name is also used to compute the directory to -# target in the search. +# Name, version, and exact are used to determine satisfaction. The +# original is called iff no satisfaction was achieved. The name is also +# used to compute the directory to target in the search. # # Results # None. # # Sideeffects -# May populate the package ifneeded database with additional -# provide scripts. +# May populate the package ifneeded database with additional provide +# scripts. proc ::tcl::tm::UnknownHandler {original name args} { # Import the list of paths to search for packages in module form. - # Import the pattern used to check package names in detail. + # Import the pattern used to check package names in detail. variable paths variable pkgpattern - # Without paths to search we can do nothing. (Except falling back - # to the regular search). + # Without paths to search we can do nothing. (Except falling back to the + # regular search). if {[llength $paths]} { set pkgpath [string map {:: /} $name] @@ -206,11 +196,10 @@ proc ::tcl::tm::UnknownHandler {original name args} { set pkgroot "" } - # We don't remember a copy of the paths while looping. Tcl - # Modules are unable to change the list while we are searching - # for them. This also simplifies the loop, as we cannot get - # additional directories while iterating over the list. A - # simple foreach is sufficient. + # We don't remember a copy of the paths while looping. Tcl Modules are + # unable to change the list while we are searching for them. This also + # simplifies the loop, as we cannot get additional directories while + # iterating over the list. A simple foreach is sufficient. set satisfied 0 foreach path $paths { @@ -223,12 +212,11 @@ proc ::tcl::tm::UnknownHandler {original name args} { } set strip [llength [file split $path]] - # We can't use glob in safe interps, so enclose the following - # in a catch statement, where we get the module files out - # of the subdirectories. In other words, Tcl Modules are - # not-functional in such an interpreter. This is the same - # as for the command "tclPkgUnknown", i.e. the search for - # regular packages. + # We can't use glob in safe interps, so enclose the following in a + # catch statement, where we get the module files out of the + # subdirectories. In other words, Tcl Modules are not-functional + # in such an interpreter. This is the same as for the command + # "tclPkgUnknown", i.e. the search for regular packages. catch { # We always look for _all_ possible modules in the current @@ -238,50 +226,50 @@ proc ::tcl::tm::UnknownHandler {original name args} { set pkgfilename [join [lrange [file split $file] $strip end] ::] if {![regexp -- $pkgpattern $pkgfilename --> pkgname pkgversion]} { - # Ignore everything not matching our pattern - # for package names. + # Ignore everything not matching our pattern for + # package names. continue } - if {[catch {package vcompare $pkgversion 0}]} { - # Ignore everything where the version part is - # not acceptable to "package vcompare". + try { + package vcompare $pkgversion 0 + } on error {} { + # Ignore everything where the version part is not + # acceptable to "package vcompare". continue } - # We have found a candidate, generate a "provide - # script" for it, and remember it. Note that we - # are using ::list to do this; locally [list] - # means something else without the namespace - # specifier. - - # NOTE. When making changes to the format of the - # provide command generated below CHECK that the - # 'LOCATE' procedure in core file - # 'platform/shell.tcl' still understands it, or, - # if not, update its implementation appropriately. + # We have found a candidate, generate a "provide script" + # for it, and remember it. Note that we are using ::list + # to do this; locally [list] means something else without + # the namespace specifier. + + # NOTE. When making changes to the format of the provide + # command generated below CHECK that the 'LOCATE' + # procedure in core file 'platform/shell.tcl' still + # understands it, or, if not, update its implementation + # appropriately. # - # Right now LOCATE's implementation assumes that - # the path of the package file is the last element - # in the list. + # Right now LOCATE's implementation assumes that the path + # of the package file is the last element in the list. package ifneeded $pkgname $pkgversion \ "[::list package provide $pkgname $pkgversion];[::list source -encoding utf-8 $file]" - # We abort in this unknown handler only if we got - # a satisfying candidate for the requested - # package. Otherwise we still have to fallback to - # the regular package search to complete the - # processing. + # We abort in this unknown handler only if we got a + # satisfying candidate for the requested package. + # Otherwise we still have to fallback to the regular + # package search to complete the processing. if { ($pkgname eq $name) && [package vsatisfies $pkgversion {*}$args] } then { set satisfied 1 - # We do not abort the loop, and keep adding - # provide scripts for every candidate in the - # directory, just remember to not fall back to - # the regular search anymore. + + # We do not abort the loop, and keep adding provide + # scripts for every candidate in the directory, just + # remember to not fall back to the regular search + # anymore. } } } @@ -292,8 +280,8 @@ proc ::tcl::tm::UnknownHandler {original name args} { } } - # Fallback to previous command, if existing. See comment above - # about ::list... + # Fallback to previous command, if existing. See comment above about + # ::list... if {[llength $original]} { uplevel 1 $original [::linsert $args 0 $name] @@ -364,17 +352,17 @@ proc ::tcl::tm::roots {paths} { set p [file join $pa tcl$major] for {set n $minor} {$n >= 0} {incr n -1} { set px [file join $p ${major}.${n}] - if {![interp issafe]} { set px [file normalize $px] } + if {![interp issafe]} {set px [file normalize $px]} path add $px } set px [file join $p site-tcl] - if {![interp issafe]} { set px [file normalize $px] } + if {![interp issafe]} {set px [file normalize $px]} path add $px } return } -# Initialization. Set up the default paths, then insert the new -# handler into the chain. +# Initialization. Set up the default paths, then insert the new handler into +# the chain. -if {![interp issafe]} { ::tcl::tm::Defaults } +if {![interp issafe]} {::tcl::tm::Defaults} |