summaryrefslogtreecommitdiffstats
path: root/tests/chanio.test
diff options
context:
space:
mode:
Diffstat (limited to 'tests/chanio.test')
-rw-r--r--tests/chanio.test322
1 files changed, 80 insertions, 242 deletions
diff --git a/tests/chanio.test b/tests/chanio.test
index 7e0bda4..5ac00cb 100644
--- a/tests/chanio.test
+++ b/tests/chanio.test
@@ -2,18 +2,18 @@
# Functionality covered: operation of all IO commands, and all procedures
# defined in generic/tclIO.c.
#
-# This file contains a collection of tests for one or more of the Tcl
-# built-in commands. Sourcing this file into Tcl runs the tests and
-# generates output for errors. No output means no errors were found.
+# This file contains a collection of tests for one or more of the Tcl built-in
+# commands. Sourcing this file into Tcl runs the tests and generates output
+# for errors. No output means no errors were found.
#
# Copyright (c) 1991-1994 The Regents of the University of California.
# Copyright (c) 1994-1997 Sun Microsystems, Inc.
# Copyright (c) 1998-1999 by Scriptics Corporation.
#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+# See the file "license.terms" for information on usage and redistribution of
+# this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
-# RCS: @(#) $Id: chanio.test,v 1.17 2008/12/18 09:43:44 ferrieux Exp $
+# RCS: @(#) $Id: chanio.test,v 1.18 2008/12/18 11:48:58 dkf Exp $
if {[catch {package require tcltest 2}]} {
chan puts stderr "Skipping tests in [info script]. tcltest 2 required."
@@ -92,7 +92,7 @@ namespace eval ::tcl::test::io {
chan close $f
return $a
}
-
+
test chan-io-1.5 {Tcl_WriteChars: CheckChannelErrors} {emptyTest} {
# no test, need to cause an async error.
} {}
@@ -115,68 +115,49 @@ set path(test2) [makeFile {} test2]
test chan-io-1.8 {Tcl_WriteChars: WriteChars} {
# This test written for SF bug #506297.
#
- # Executing this test without the fix for the referenced bug
- # applied to tcl will cause tcl, more specifically WriteChars, to
- # go into an infinite loop.
-
+ # Executing this test without the fix for the referenced bug applied to
+ # tcl will cause tcl, more specifically WriteChars, to go into an infinite
+ # loop.
set f [open $path(test2) w]
chan configure $f -encoding iso2022-jp
chan puts -nonewline $f [format %s%c [string repeat " " 4] 12399]
chan close $f
contents $path(test2)
} " \x1b\$B\$O\x1b(B"
-
test chan-io-1.9 {Tcl_WriteChars: WriteChars} {
- # When closing a channel with an encoding that appends
- # escape bytes, check for the case where the escape
- # bytes overflow the current IO buffer. The bytes
- # should be moved into a new buffer.
-
+ # When closing a channel with an encoding that appends escape bytes, check
+ # for the case where the escape bytes overflow the current IO buffer. The
+ # bytes should be moved into a new buffer.
set data "1234567890 [format %c 12399]"
-
set sizes [list]
-
# With default buffer size
set f [open $path(test2) w]
chan configure $f -encoding iso2022-jp
chan puts -nonewline $f $data
chan close $f
lappend sizes [file size $path(test2)]
-
- # With buffer size equal to the length
- # of the data, the escape bytes would
+ # With buffer size equal to the length of the data, the escape bytes would
# go into the next buffer.
-
set f [open $path(test2) w]
chan configure $f -encoding iso2022-jp -buffersize 16
chan puts -nonewline $f $data
chan close $f
lappend sizes [file size $path(test2)]
-
- # With buffer size that is large enough
- # to hold 1 byte of escaped data, but
- # not all 3. This should not write
- # the escape bytes to the first buffer
- # and then again to the second buffer.
-
+ # With buffer size that is large enough to hold 1 byte of escaped data,
+ # but not all 3. This should not write the escape bytes to the first
+ # buffer and then again to the second buffer.
set f [open $path(test2) w]
chan configure $f -encoding iso2022-jp -buffersize 17
chan puts -nonewline $f $data
chan close $f
lappend sizes [file size $path(test2)]
-
- # With buffer size that can hold 2 out of
- # 3 bytes of escaped data.
-
+ # With buffer size that can hold 2 out of 3 bytes of escaped data.
set f [open $path(test2) w]
chan configure $f -encoding iso2022-jp -buffersize 18
chan puts -nonewline $f $data
chan close $f
lappend sizes [file size $path(test2)]
-
- # With buffer size that can hold all the
- # data and escape bytes.
-
+ # With buffer size that can hold all the data and escape bytes.
set f [open $path(test2) w]
chan configure $f -encoding iso2022-jp -buffersize 19
chan puts -nonewline $f $data
@@ -186,7 +167,6 @@ test chan-io-1.9 {Tcl_WriteChars: WriteChars} {
test chan-io-2.1 {WriteBytes} {
# loop until all bytes are written
-
set f [open $path(test1) w]
chan configure $f -encoding binary -buffersize 16 -translation crlf
chan puts $f "abcdefghijklmnopqrstuvwxyz"
@@ -196,7 +176,6 @@ test chan-io-2.1 {WriteBytes} {
test chan-io-2.2 {WriteBytes: savedLF > 0} {
# After flushing buffer, there was a \n left over from the last
# \n -> \r\n expansion. It gets stuck at beginning of this buffer.
-
set f [open $path(test1) w]
chan configure $f -encoding binary -buffersize 16 -translation crlf
chan puts -nonewline $f "123456789012345\n12"
@@ -208,7 +187,6 @@ test chan-io-2.3 {WriteBytes: flush on line} {
# Tcl "line" buffering has weird behavior: if current buffer contains
# a \n, entire buffer gets flushed. Logical behavior would be to flush
# only up to the \n.
-
set f [open $path(test1) w]
chan configure $f -encoding binary -buffering line -translation crlf
chan puts -nonewline $f "\n12"
@@ -228,7 +206,6 @@ test chan-io-2.4 {WriteBytes: reset sawLF after each buffer} {
test chan-io-3.1 {WriteChars: compatibility with WriteBytes} {
# loop until all bytes are written
-
set f [open $path(test1) w]
chan configure $f -encoding ascii -buffersize 16 -translation crlf
chan puts $f "abcdefghijklmnopqrstuvwxyz"
@@ -238,7 +215,6 @@ test chan-io-3.1 {WriteChars: compatibility with WriteBytes} {
test chan-io-3.2 {WriteChars: compatibility with WriteBytes: savedLF > 0} {
# After flushing buffer, there was a \n left over from the last
# \n -> \r\n expansion. It gets stuck at beginning of this buffer.
-
set f [open $path(test1) w]
chan configure $f -encoding ascii -buffersize 16 -translation crlf
chan puts -nonewline $f "123456789012345\n12"
@@ -250,7 +226,6 @@ test chan-io-3.3 {WriteChars: compatibility with WriteBytes: flush on line} {
# Tcl "line" buffering has weird behavior: if current buffer contains
# a \n, entire buffer gets flushed. Logical behavior would be to flush
# only up to the \n.
-
set f [open $path(test1) w]
chan configure $f -encoding ascii -buffering line -translation crlf
chan puts -nonewline $f "\n12"
@@ -260,7 +235,6 @@ test chan-io-3.3 {WriteChars: compatibility with WriteBytes: flush on line} {
} "\r\n12"
test chan-io-3.4 {WriteChars: loop over stage buffer} {
# stage buffer maps to more than can be queued at once.
-
set f [open $path(test1) w]
chan configure $f -encoding jis0208 -buffersize 16
chan puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
@@ -269,10 +243,9 @@ test chan-io-3.4 {WriteChars: loop over stage buffer} {
lappend x [contents $path(test1)]
} [list "!)!)!)!)!)!)!)!)" "!)!)!)!)!)!)!)!)!)!)!)!)!)!)!)"]
test chan-io-3.5 {WriteChars: saved != 0} {
- # Bytes produced by UtfToExternal from end of last channel buffer
- # had to be moved to beginning of next channel buffer to preserve
- # requested buffersize.
-
+ # Bytes produced by UtfToExternal from end of last channel buffer had to
+ # be moved to beginning of next channel buffer to preserve requested
+ # buffersize.
set f [open $path(test1) w]
chan configure $f -encoding jis0208 -buffersize 17
chan puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
@@ -281,15 +254,14 @@ test chan-io-3.5 {WriteChars: saved != 0} {
lappend x [contents $path(test1)]
} [list "!)!)!)!)!)!)!)!)!" "!)!)!)!)!)!)!)!)!)!)!)!)!)!)!)"]
test chan-io-3.6 {WriteChars: (stageRead + dstWrote == 0)} {
- # One incomplete UTF-8 character at end of staging buffer. Backup
- # in src to the beginning of that UTF-8 character and try again.
+ # One incomplete UTF-8 character at end of staging buffer. Backup in src
+ # to the beginning of that UTF-8 character and try again.
#
# Translate the first 16 bytes, produce 14 bytes of output, 2 left over
- # (first two bytes of \uff21 in UTF-8). Given those two bytes try
+ # (first two bytes of \uff21 in UTF-8). Given those two bytes try
# translating them again, find that no bytes are read produced, and break
- # to outer loop where those two bytes will have the remaining 4 bytes
- # (the last byte of \uff21 plus the all of \uff22) appended.
-
+ # to outer loop where those two bytes will have the remaining 4 bytes (the
+ # last byte of \uff21 plus the all of \uff22) appended.
set f [open $path(test1) w]
chan configure $f -encoding shiftjis -buffersize 16
chan puts -nonewline $f "12345678901234\uff21\uff22"
@@ -298,12 +270,11 @@ test chan-io-3.6 {WriteChars: (stageRead + dstWrote == 0)} {
lappend x [contents $path(test1)]
} [list "12345678901234\x82\x60" "12345678901234\x82\x60\x82\x61"]
test chan-io-3.7 {WriteChars: (bufPtr->nextAdded > bufPtr->length)} {
- # When translating UTF-8 to external, the produced bytes went past end
- # of the channel buffer. This is done purpose -- we then truncate the
- # bytes at the end of the partial character to preserve the requested
- # blocksize on flush. The truncated bytes are moved to the beginning
- # of the next channel buffer.
-
+ # When translating UTF-8 to external, the produced bytes went past end of
+ # the channel buffer. This is done on purpose - we then truncate the bytes
+ # at the end of the partial character to preserve the requested blocksize
+ # on flush. The truncated bytes are moved to the beginning of the next
+ # channel buffer.
set f [open $path(test1) w]
chan configure $f -encoding jis0208 -buffersize 17
chan puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
@@ -323,7 +294,6 @@ test chan-io-3.8 {WriteChars: reset sawLF after each buffer} {
test chan-io-4.1 {TranslateOutputEOL: lf} {
# search for \n
-
set f [open $path(test1) w]
chan configure $f -buffering line -translation lf
chan puts $f "abcde"
@@ -333,7 +303,6 @@ test chan-io-4.1 {TranslateOutputEOL: lf} {
} [list "abcde\n" "abcde\n"]
test chan-io-4.2 {TranslateOutputEOL: cr} {
# search for \n, replace with \r
-
set f [open $path(test1) w]
chan configure $f -buffering line -translation cr
chan puts $f "abcde"
@@ -343,7 +312,6 @@ test chan-io-4.2 {TranslateOutputEOL: cr} {
} [list "abcde\r" "abcde\r"]
test chan-io-4.3 {TranslateOutputEOL: crlf} {
# simple case: search for \n, replace with \r
-
set f [open $path(test1) w]
chan configure $f -buffering line -translation crlf
chan puts $f "abcde"
@@ -352,10 +320,9 @@ test chan-io-4.3 {TranslateOutputEOL: crlf} {
lappend x [contents $path(test1)]
} [list "abcde\r\n" "abcde\r\n"]
test chan-io-4.4 {TranslateOutputEOL: crlf} {
- # keep storing more bytes in output buffer until output buffer is full.
- # We have 13 bytes initially that would turn into 18 bytes. Fill
- # dest buffer while (dstEnd < dstMax).
-
+ # Keep storing more bytes in output buffer until output buffer is full. We
+ # have 13 bytes initially that would turn into 18 bytes. Fill dest buffer
+ # while (dstEnd < dstMax).
set f [open $path(test1) w]
chan configure $f -translation crlf -buffersize 16
chan puts -nonewline $f "1234567\n\n\n\n\nA"
@@ -365,7 +332,6 @@ test chan-io-4.4 {TranslateOutputEOL: crlf} {
} [list "1234567\r\n\r\n\r\n\r\n\r" "1234567\r\n\r\n\r\n\r\n\r\nA"]
test chan-io-4.5 {TranslateOutputEOL: crlf} {
# Check for overflow of the destination buffer
-
set f [open $path(test1) w]
chan configure $f -translation crlf -buffersize 12
chan puts -nonewline $f "12345678901\n456789012345678901234"
@@ -428,7 +394,6 @@ test chan-io-6.2 {Tcl_GetsObj: CheckChannelErrors() != 0} emptyTest {
} {}
test chan-io-6.3 {Tcl_GetsObj: how many have we used?} {
# if (bufPtr != NULL) {oldRemoved = bufPtr->nextRemoved}
-
set f [open $path(test1) w]
chan configure $f -translation crlf
chan puts $f "abc\ndefg"
@@ -465,7 +430,6 @@ append a $a
append a $a
test chan-io-6.6 {Tcl_GetsObj: loop test} {
# if (dst >= dstEnd)
-
set f [open $path(test1) w]
chan puts $f $a
chan puts $f hi
@@ -477,7 +441,6 @@ test chan-io-6.6 {Tcl_GetsObj: loop test} {
} [list 256 $a]
test chan-io-6.7 {Tcl_GetsObj: error in input} {stdio openpipe} {
# if (FilterInputBytes(chanPtr, &gs) != 0)
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan puts -nonewline $f "hi\nwould"
chan flush $f
@@ -724,7 +687,6 @@ test chan-io-6.29 {Tcl_GetsObj: crlf mode: several chars} {
} [list 14 "abcd\nefgh\rijkl" 4 "mnop" -1 ""]
test chan-io-6.30 {Tcl_GetsObj: crlf mode: buffer exhausted} {testchannel} {
# if (eol >= dstEnd)
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "123456789012345\r\nabcdefghijklmnoprstuvwxyz"
@@ -737,7 +699,6 @@ test chan-io-6.30 {Tcl_GetsObj: crlf mode: buffer exhausted} {testchannel} {
} [list 15 "123456789012345" 15]
test chan-io-6.31 {Tcl_GetsObj: crlf mode: buffer exhausted, blocked} {stdio testchannel openpipe fileevent} {
# (FilterInputBytes() != 0)
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan configure $f -translation {crlf lf} -buffering none
chan puts -nonewline $f "bbbbbbbbbbbbbb\r\n123456789012345\r"
@@ -750,7 +711,6 @@ test chan-io-6.31 {Tcl_GetsObj: crlf mode: buffer exhausted, blocked} {stdio tes
} [list "bbbbbbbbbbbbbb" -1 "" 1 16]
test chan-io-6.32 {Tcl_GetsObj: crlf mode: buffer exhausted, more data} {testchannel} {
# not (FilterInputBytes() != 0)
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "123456789012345\r\n123"
@@ -763,7 +723,6 @@ test chan-io-6.32 {Tcl_GetsObj: crlf mode: buffer exhausted, more data} {testcha
} [list 15 "123456789012345" 17 3]
test chan-io-6.33 {Tcl_GetsObj: crlf mode: buffer exhausted, at eof} {
# eol still equals dstEnd
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "123456789012345\r"
@@ -776,7 +735,6 @@ test chan-io-6.33 {Tcl_GetsObj: crlf mode: buffer exhausted, at eof} {
} [list 16 "123456789012345\r" 1]
test chan-io-6.34 {Tcl_GetsObj: crlf mode: buffer exhausted, not followed by \n} {
# not (*eol == '\n')
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "123456789012345\rabcd\r\nefg"
@@ -876,7 +834,6 @@ test chan-io-6.42 {Tcl_GetsObj: auto mode: several chars} {
} [list 4 "abcd" 4 "efgh" 4 "ijkl" 4 "mnop" -1 ""]
test chan-io-6.43 {Tcl_GetsObj: input saw cr} {stdio testchannel openpipe fileevent} {
# if (chanPtr->flags & INPUT_SAW_CR)
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan configure $f -translation {auto lf} -buffering none
chan puts -nonewline $f "bbbbbbbbbbbbbbb\n123456789abcdef\r"
@@ -893,7 +850,6 @@ test chan-io-6.43 {Tcl_GetsObj: input saw cr} {stdio testchannel openpipe fileev
} [list "bbbbbbbbbbbbbbb" 15 "123456789abcdef" 1 4 "abcd" 0 3 "efg"]
test chan-io-6.44 {Tcl_GetsObj: input saw cr, not followed by cr} {stdio testchannel openpipe fileevent} {
# not (*eol == '\n')
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan configure $f -translation {auto lf} -buffering none
chan puts -nonewline $f "bbbbbbbbbbbbbbb\n123456789abcdef\r"
@@ -910,7 +866,6 @@ test chan-io-6.44 {Tcl_GetsObj: input saw cr, not followed by cr} {stdio testcha
} [list "bbbbbbbbbbbbbbb" 15 "123456789abcdef" 1 4 "abcd" 0 3 "efg"]
test chan-io-6.45 {Tcl_GetsObj: input saw cr, skip right number of bytes} {stdio testchannel openpipe fileevent} {
# Tcl_ExternalToUtf()
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan configure $f -translation {auto lf} -buffering none
chan configure $f -encoding unicode
@@ -927,7 +882,6 @@ test chan-io-6.45 {Tcl_GetsObj: input saw cr, skip right number of bytes} {stdio
} [list 15 "123456789abcdef" 1 4 "abcd" 0]
test chan-io-6.46 {Tcl_GetsObj: input saw cr, followed by just \n should give eof} {stdio testchannel openpipe fileevent} {
# memmove()
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan configure $f -translation {auto lf} -buffering none
chan puts -nonewline $f "bbbbbbbbbbbbbbb\n123456789abcdef\r"
@@ -943,7 +897,6 @@ test chan-io-6.46 {Tcl_GetsObj: input saw cr, followed by just \n should give eo
} [list 15 "123456789abcdef" 1 -1 "" 0]
test chan-io-6.47 {Tcl_GetsObj: auto mode: \r at end of buffer, peek for \n} {testchannel} {
# (eol == dstEnd)
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "123456789012345\r\nabcdefghijklmnopq"
@@ -956,7 +909,6 @@ test chan-io-6.47 {Tcl_GetsObj: auto mode: \r at end of buffer, peek for \n} {te
} [list "123456789012345" 15]
test chan-io-6.48 {Tcl_GetsObj: auto mode: \r at end of buffer, no more avail} {testchannel} {
# PeekAhead() did not get any, so (eol >= dstEnd)
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "123456789012345\r"
@@ -969,7 +921,6 @@ test chan-io-6.48 {Tcl_GetsObj: auto mode: \r at end of buffer, no more avail} {
} [list "123456789012345" 1]
test chan-io-6.49 {Tcl_GetsObj: auto mode: \r followed by \n} {testchannel} {
# if (*eol == '\n') {skip++}
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "123456\r\n78901"
@@ -981,7 +932,6 @@ test chan-io-6.49 {Tcl_GetsObj: auto mode: \r followed by \n} {testchannel} {
} [list "123456" 0 8 "78901"]
test chan-io-6.50 {Tcl_GetsObj: auto mode: \r not followed by \n} {testchannel} {
# not (*eol == '\n')
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "123456\r78901"
@@ -993,7 +943,6 @@ test chan-io-6.50 {Tcl_GetsObj: auto mode: \r not followed by \n} {testchannel}
} [list "123456" 0 7 "78901"]
test chan-io-6.51 {Tcl_GetsObj: auto mode: \n} {
# else if (*eol == '\n') {goto gotoeol;}
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "123456\n78901"
@@ -1005,7 +954,6 @@ test chan-io-6.51 {Tcl_GetsObj: auto mode: \n} {
} [list "123456" 7 "78901"]
test chan-io-6.52 {Tcl_GetsObj: saw EOF character} {testchannel} {
# if (eof != NULL)
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "123456\x1ak9012345\r"
@@ -1018,7 +966,6 @@ test chan-io-6.52 {Tcl_GetsObj: saw EOF character} {testchannel} {
} [list "123456" 0 6 ""]
test chan-io-6.53 {Tcl_GetsObj: device EOF} {
# didn't produce any bytes
-
set f [open $path(test1) w]
chan close $f
set f [open $path(test1)]
@@ -1028,7 +975,6 @@ test chan-io-6.53 {Tcl_GetsObj: device EOF} {
} {-1 {} 1}
test chan-io-6.54 {Tcl_GetsObj: device EOF} {
# got some bytes before EOF.
-
set f [open $path(test1) w]
chan puts -nonewline $f abc
chan close $f
@@ -1039,7 +985,6 @@ test chan-io-6.54 {Tcl_GetsObj: device EOF} {
} {3 abc 1}
test chan-io-6.55 {Tcl_GetsObj: overconverted} {
# Tcl_ExternalToUtf(), make sure state updated
-
set f [open $path(test1) w]
chan configure $f -encoding iso2022-jp
chan puts $f "there\u4e00ok\n\u4e01more bytes\nhere"
@@ -1073,7 +1018,6 @@ test chan-io-6.56 {Tcl_GetsObj: incomplete lines should disable file events} {st
test chan-io-7.1 {FilterInputBytes: split up character at end of buffer} {
# (result == TCL_CONVERT_MULTIBYTE)
-
set f [open $path(test1) w]
chan configure $f -encoding shiftjis
chan puts $f "1234567890123\uff10\uff11\uff12\uff13\uff14\nend"
@@ -1086,7 +1030,6 @@ test chan-io-7.1 {FilterInputBytes: split up character at end of buffer} {
} "1234567890123\uff10\uff11\uff12\uff13\uff14"
test chan-io-7.2 {FilterInputBytes: split up character in middle of buffer} {
# (bufPtr->nextAdded < bufPtr->bufLength)
-
set f [open $path(test1) w]
chan configure $f -encoding binary
chan puts -nonewline $f "1234567890\n123\x82\x4f\x82\x50\x82"
@@ -1132,7 +1075,6 @@ test chan-io-7.4 {FilterInputBytes: recover from split up character} {stdio open
test chan-io-8.1 {PeekAhead: only go to device if no more cached data} {testchannel} {
# (bufPtr->nextPtr == NULL)
-
set f [open $path(test1) w]
chan configure $f -encoding ascii -translation lf
chan puts -nonewline $f "123456789012345\r\n2345678"
@@ -1147,7 +1089,6 @@ test chan-io-8.1 {PeekAhead: only go to device if no more cached data} {testchan
} "7"
test chan-io-8.2 {PeekAhead: only go to device if no more cached data} {stdio testchannel openpipe fileevent} {
# not (bufPtr->nextPtr == NULL)
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan configure $f -translation lf -encoding ascii -buffering none
chan puts -nonewline $f "123456789012345\r\nbcdefghijklmnopqrstuvwxyz"
@@ -1167,7 +1108,6 @@ test chan-io-8.2 {PeekAhead: only go to device if no more cached data} {stdio te
} [list -1 "" 42 15 "123456789012345" 25]
test chan-io-8.3 {PeekAhead: no cached data available} {stdio testchannel openpipe fileevent} {
# (bytesLeft == 0)
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan configure $f -translation {auto binary}
chan puts -nonewline $f "abcdefghijklmno\r"
@@ -1181,18 +1121,15 @@ append a "123456789012345678901234567890"
append a "1234567890123456789012345678901"
test chan-io-8.4 {PeekAhead: cached data available in this buffer} {
# not (bytesLeft == 0)
-
set f [open $path(test1) w+]
chan configure $f -translation binary
chan puts $f "${a}\r\nabcdef"
chan close $f
set f [open $path(test1)]
chan configure $f -encoding binary -translation auto
-
- # "${a}\r" was converted in one operation (because ENCODING_LINESIZE
- # is 30). To check if "\n" follows, calls PeekAhead and determines
- # that cached data is available in buffer w/o having to call driver.
-
+ # "${a}\r" was converted in one operation (because ENCODING_LINESIZE is
+ # 30). To check if "\n" follows, calls PeekAhead and determines that
+ # cached data is available in buffer w/o having to call driver.
set x [chan gets $f]
chan close $f
set x
@@ -1200,7 +1137,6 @@ test chan-io-8.4 {PeekAhead: cached data available in this buffer} {
unset a
test chan-io-8.5 {PeekAhead: don't peek if last read was short} {stdio testchannel openpipe fileevent} {
# (bufPtr->nextAdded < bufPtr->length)
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan configure $f -translation {auto binary}
chan puts -nonewline $f "abcdefghijklmno\r"
@@ -1212,7 +1148,6 @@ test chan-io-8.5 {PeekAhead: don't peek if last read was short} {stdio testchann
} {15 abcdefghijklmno 1}
test chan-io-8.6 {PeekAhead: change to non-blocking mode} {stdio testchannel openpipe fileevent} {
# ((chanPtr->flags & CHANNEL_NONBLOCKING) == 0)
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan configure $f -translation {auto binary} -buffersize 16
chan puts -nonewline $f "abcdefghijklmno\r"
@@ -1224,7 +1159,6 @@ test chan-io-8.6 {PeekAhead: change to non-blocking mode} {stdio testchannel ope
} {15 abcdefghijklmno 1}
test chan-io-8.7 {PeekAhead: cleanup} {stdio testchannel openpipe fileevent} {
# Make sure bytes are removed from buffer.
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan configure $f -translation {auto binary} -buffering none
chan puts -nonewline $f "abcdefghijklmno\r"
@@ -1245,11 +1179,9 @@ test chan-io-10.1 {Tcl_ReadChars: CheckChannelErrors} emptyTest {
test chan-io-10.2 {Tcl_ReadChars: loop until enough copied} {
# one time
# for (copied = 0; (unsigned) toRead > 0; )
-
set f [open $path(test1) w]
chan puts $f abcdefghijklmnop
chan close $f
-
set f [open $path(test1)]
set x [chan read $f 5]
chan close $f
@@ -1258,11 +1190,9 @@ test chan-io-10.2 {Tcl_ReadChars: loop until enough copied} {
test chan-io-10.3 {Tcl_ReadChars: loop until enough copied} {
# multiple times
# for (copied = 0; (unsigned) toRead > 0; )
-
set f [open $path(test1) w]
chan puts $f abcdefghijklmnopqrstuvwxyz
chan close $f
-
set f [open $path(test1)]
chan configure $f -buffersize 16
# here
@@ -1272,11 +1202,9 @@ test chan-io-10.3 {Tcl_ReadChars: loop until enough copied} {
} {abcdefghijklmnopqrs}
test chan-io-10.4 {Tcl_ReadChars: no more in channel buffer} {
# (copiedNow < 0)
-
set f [open $path(test1) w]
chan puts -nonewline $f abcdefghijkl
chan close $f
-
set f [open $path(test1)]
# here
set x [chan read $f 1000]
@@ -1285,11 +1213,9 @@ test chan-io-10.4 {Tcl_ReadChars: no more in channel buffer} {
} {abcdefghijkl}
test chan-io-10.5 {Tcl_ReadChars: stop on EOF} {
# (chanPtr->flags & CHANNEL_EOF)
-
set f [open $path(test1) w]
chan puts -nonewline $f abcdefghijkl
chan close $f
-
set f [open $path(test1)]
# here
set x [chan read $f 1000]
@@ -1299,7 +1225,6 @@ test chan-io-10.5 {Tcl_ReadChars: stop on EOF} {
test chan-io-11.1 {ReadBytes: want to read a lot} {
# ((unsigned) toRead > (unsigned) srcLen)
-
set f [open $path(test1) w]
chan puts -nonewline $f abcdefghijkl
chan close $f
@@ -1312,7 +1237,6 @@ test chan-io-11.1 {ReadBytes: want to read a lot} {
} {abcdefghijkl}
test chan-io-11.2 {ReadBytes: want to read all} {
# ((unsigned) toRead > (unsigned) srcLen)
-
set f [open $path(test1) w]
chan puts -nonewline $f abcdefghijkl
chan close $f
@@ -1325,7 +1249,6 @@ test chan-io-11.2 {ReadBytes: want to read all} {
} {abcdefghijkl}
test chan-io-11.3 {ReadBytes: allocate more space} {
# (toRead > length - offset - 1)
-
set f [open $path(test1) w]
chan puts -nonewline $f abcdefghijklmnopqrstuvwxyz
chan close $f
@@ -1338,7 +1261,6 @@ test chan-io-11.3 {ReadBytes: allocate more space} {
} {abcdefghijklmnopqrstuvwxyz}
test chan-io-11.4 {ReadBytes: EOF char found} {
# (TranslateInputEOL() != 0)
-
set f [open $path(test1) w]
chan puts $f abcdefghijklmnopqrstuvwxyz
chan close $f
@@ -1352,7 +1274,6 @@ test chan-io-11.4 {ReadBytes: EOF char found} {
test chan-io-12.1 {ReadChars: want to read a lot} {
# ((unsigned) toRead > (unsigned) srcLen)
-
set f [open $path(test1) w]
chan puts -nonewline $f abcdefghijkl
chan close $f
@@ -1364,7 +1285,6 @@ test chan-io-12.1 {ReadChars: want to read a lot} {
} {abcdefghijkl}
test chan-io-12.2 {ReadChars: want to read all} {
# ((unsigned) toRead > (unsigned) srcLen)
-
set f [open $path(test1) w]
chan puts -nonewline $f abcdefghijkl
chan close $f
@@ -1376,7 +1296,6 @@ test chan-io-12.2 {ReadChars: want to read all} {
} {abcdefghijkl}
test chan-io-12.3 {ReadChars: allocate more space} {
# (toRead > length - offset - 1)
-
set f [open $path(test1) w]
chan puts -nonewline $f abcdefghijklmnopqrstuvwxyz
chan close $f
@@ -1389,19 +1308,16 @@ test chan-io-12.3 {ReadChars: allocate more space} {
} {abcdefghijklmnopqrstuvwxyz}
test chan-io-12.4 {ReadChars: split-up char} {stdio testchannel openpipe fileevent} {
# (srcRead == 0)
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan configure $f -encoding binary -buffering none -buffersize 16
chan puts -nonewline $f "123456789012345\x96"
chan configure $f -encoding shiftjis -blocking 0
-
chan event $f read [namespace code "ready $f"]
proc ready {f} {
variable x
lappend x [chan read $f] [testchannel inputbuffered $f]
}
variable x {}
-
chan configure $f -encoding shiftjis
vwait [namespace which -variable x]
chan configure $f -encoding binary -blocking 1
@@ -1470,7 +1386,6 @@ test chan-io-13.2 {TranslateInputEOL: crlf mode} {
} "abcd\ndef\n"
test chan-io-13.3 {TranslateInputEOL: crlf mode: naked cr} {
# (src >= srcMax)
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "abcd\r\ndef\r"
@@ -1483,7 +1398,6 @@ test chan-io-13.3 {TranslateInputEOL: crlf mode: naked cr} {
} "abcd\ndef\r"
test chan-io-13.4 {TranslateInputEOL: crlf mode: cr followed by not \n} {
# (src >= srcMax)
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "abcd\r\ndef\rfgh"
@@ -1496,7 +1410,6 @@ test chan-io-13.4 {TranslateInputEOL: crlf mode: cr followed by not \n} {
} "abcd\ndef\rfgh"
test chan-io-13.5 {TranslateInputEOL: crlf mode: naked lf} {
# (src >= srcMax)
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "abcd\r\ndef\nfgh"
@@ -1510,10 +1423,8 @@ test chan-io-13.5 {TranslateInputEOL: crlf mode: naked lf} {
test chan-io-13.6 {TranslateInputEOL: auto mode: saw cr in last segment} {stdio testchannel openpipe fileevent} {
# (chanPtr->flags & INPUT_SAW_CR)
# This test may fail on slower machines.
-
set f [open "|[list [interpreter] $path(cat)]" w+]
chan configure $f -blocking 0 -buffering none -translation {auto lf}
-
chan event $f read [namespace code "ready $f"]
proc ready {f} {
variable x
@@ -1521,21 +1432,17 @@ test chan-io-13.6 {TranslateInputEOL: auto mode: saw cr in last segment} {stdio
}
variable x {}
variable y {}
-
chan puts -nonewline $f "abcdefghj\r"
after 500 [namespace code {set y ok}]
vwait [namespace which -variable y]
-
chan puts -nonewline $f "\n01234"
after 500 [namespace code {set y ok}]
vwait [namespace which -variable y]
-
chan close $f
set x
} [list "abcdefghj\n" 1 "01234" 0]
test chan-io-13.7 {TranslateInputEOL: auto mode: naked \r} {testchannel openpipe} {
# (src >= srcMax)
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "abcd\r"
@@ -1548,7 +1455,6 @@ test chan-io-13.7 {TranslateInputEOL: auto mode: naked \r} {testchannel openpipe
} [list "abcd\n" 1]
test chan-io-13.8 {TranslateInputEOL: auto mode: \r\n} {
# (*src == '\n')
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "abcd\r\ndef"
@@ -1572,7 +1478,6 @@ test chan-io-13.9 {TranslateInputEOL: auto mode: \r followed by not \n} {
} "abcd\ndef"
test chan-io-13.10 {TranslateInputEOL: auto mode: \n} {
# not (*src == '\r')
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "abcd\ndef"
@@ -1585,7 +1490,6 @@ test chan-io-13.10 {TranslateInputEOL: auto mode: \n} {
} "abcd\ndef"
test chan-io-13.11 {TranslateInputEOL: EOF char} {
# (*chanPtr->inEofChar != '\0')
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "abcd\ndefgh"
@@ -1598,7 +1502,6 @@ test chan-io-13.11 {TranslateInputEOL: EOF char} {
} "abcd\nd"
test chan-io-13.12 {TranslateInputEOL: find EOF char in src} {
# (*chanPtr->inEofChar != '\0')
-
set f [open $path(test1) w]
chan configure $f -translation lf
chan puts -nonewline $f "\r\n\r\n\r\nab\r\n\r\ndef\r\n\r\n\r\n"
@@ -1610,11 +1513,11 @@ test chan-io-13.12 {TranslateInputEOL: find EOF char in src} {
set x
} "\n\n\nab\n\nd"
-# Test standard handle management. The functions tested are
-# Tcl_SetStdChannel and Tcl_GetStdChannel. Incidentally we are
-# also testing channel table management.
+# Test standard handle management. The functions tested are Tcl_SetStdChannel
+# and Tcl_GetStdChannel. Incidentally we are also testing channel table
+# management.
-if {[info commands testchannel] != ""} {
+if {[info commands testchannel] ne ""} {
set consoleFileNames [lsort [testchannel open]]
} else {
# just to avoid an error
@@ -1789,12 +1692,12 @@ test chan-io-15.1 {Tcl_CreateChan CloseHandler} emptyTest {
test chan-io-16.1 {Tcl_DeleteChan CloseHandler} emptyTest {
} {}
-# Test channel table management. The functions tested are
-# GetChannelTable, DeleteChannelTable, Tcl_RegisterChannel,
-# Tcl_UnregisterChannel, Tcl_GetChannel and Tcl_CreateChannel.
+# Test channel table management. The functions tested are GetChannelTable,
+# DeleteChannelTable, Tcl_RegisterChannel, Tcl_UnregisterChannel,
+# Tcl_GetChannel and Tcl_CreateChannel.
#
-# These functions use "eof stdin" to ensure that the standard
-# channels are added to the channel table of the interpreter.
+# These functions use "eof stdin" to ensure that the standard channels are
+# added to the channel table of the interpreter.
test chan-io-17.1 {GetChannelTable, DeleteChannelTable on std handles} {testchannel} {
set l1 [testchannel refcount stdin]
@@ -1960,11 +1863,11 @@ test chan-io-20.5 {Tcl_CreateChannel: install channel in empty slot} {stdio open
test chan-io-21.1 {Chan CloseChannelsOnExit} emptyTest {
} {}
-# Test management of attributes associated with a channel, such as
-# its default translation, its name and type, etc. The functions
-# tested in this group are Tcl_GetChannelName,
-# Tcl_GetChannelType and Tcl_GetChannelFile. Tcl_GetChannelInstanceData
-# not tested because files do not use the instance data.
+# Test management of attributes associated with a channel, such as its default
+# translation, its name and type, etc. The functions tested in this group are
+# Tcl_GetChannelName, Tcl_GetChannelType and Tcl_GetChannelFile.
+# Tcl_GetChannelInstanceData not tested because files do not use the instance
+# data.
test chan-io-22.1 {Tcl_GetChannelMode} emptyTest {
# Not used anywhere in Tcl.
@@ -2018,7 +1921,6 @@ test chan-io-25.2 {Tcl_GetChannelHandle, output} {testchannel} {
test chan-io-26.1 {Tcl_GetChannelInstanceData} {stdio openpipe} {
# "pid" command uses Tcl_GetChannelInstanceData
# Don't care what pid is (but must be a number), just want to exercise it.
-
set f [open "|[list [interpreter] << exit]"]
expr [pid $f]
chan close $f
@@ -2128,7 +2030,8 @@ test chan-io-27.6 {FlushChannel, async flushing, async chan close} \
}
} ok
-# Tests closing a channel. The functions tested are Chan CloseChannel and Tcl_Chan Close.
+# Tests closing a channel. The functions tested are Chan CloseChannel and
+# Tcl_Chan Close.
test chan-io-28.1 {Chan CloseChannel called when all references are dropped} {testchannel} {
file delete $path(test1)
@@ -2164,14 +2067,11 @@ test chan-io-28.3 {Chan CloseChannel, not called before output queue is empty} \
file delete $path(output)
set f [open $path(pipe) w]
chan puts $f {
-
# Need to not have eof char appended on chan close, because the other
# side of the pipe already chan closed, so that writing would cause an
# error "invalid file".
-
chan configure stdout -eofchar {}
chan configure stderr -eofchar {}
-
set f [open $path(output) w]
chan configure $f -translation lf -buffering none
for {set x 0} {$x < 20} {incr x} {
@@ -2189,7 +2089,6 @@ test chan-io-28.3 {Chan CloseChannel, not called before output queue is empty} \
chan close $f
set f [open "|[list [interpreter] pipe]" r+]
chan configure $f -blocking off -eofchar {}
-
chan puts -nonewline $f $x
chan close $f
set counter 0
@@ -2229,7 +2128,7 @@ test chan-io-28.5 {Tcl_Chan Close vs standard handles} {stdio unix testchannel o
chan close $f
set l
} {file1 file2}
-if {0} {test chan-io-28.6 {Tcl_CloseEx (half-close) pipe} {
+test chan-io-28.6 {Tcl_CloseEx (half-close) pipe} knownBug {
set cat [makeFile {
fconfigure stdout -buffering line
while {[gets stdin line]>=0} {puts $line}
@@ -2249,8 +2148,8 @@ if {0} {test chan-io-28.6 {Tcl_CloseEx (half-close) pipe} {
vwait ::done
close $::ff r
list $::done $::acc
-} {Succeeded {Hey DONE}}}
-if {0} {test chan-io-28.7 {Tcl_CloseEx (half-close) socket} {
+} {Succeeded {Hey DONE}}
+test chan-io-28.7 {Tcl_CloseEx (half-close) socket} knownBug {
set echo [makeFile {
proc accept {s args} {set ::sok $s}
set s [socket -server accept 0]
@@ -2278,7 +2177,8 @@ if {0} {test chan-io-28.7 {Tcl_CloseEx (half-close) socket} {
close $::s r
close $::ff
list $::done $::acc
-} {Succeeded {Hey DONE}}}
+} {Succeeded {Hey DONE}}
+
test chan-io-29.1 {Tcl_WriteChars, channel not writable} {
list [catch {chan puts stdin hello} msg] $msg
} {1 {channel "stdin" wasn't opened for writing}}
@@ -2811,7 +2711,6 @@ test chan-io-29.34 {Tcl_Chan Close, async flush on chan close, using sockets} {s
variable c
variable x
set l [chan gets $s]
-
if {[chan eof $s]} {
chan close $s
set x done
@@ -2830,9 +2729,8 @@ test chan-io-29.34 {Tcl_Chan Close, async flush on chan close, using sockets} {s
set c
} 2000
test chan-io-29.35 {Tcl_Chan Close vs chan event vs multiple interpreters} {socket tempNotMac fileevent} {
- # On Mac, this test screws up sockets such that subsequent tests using port 2828
- # either cause errors or panic().
-
+ # On Mac, this test screws up sockets such that subsequent tests using
+ # port 2828 either cause errors or panic().
catch {interp delete x}
catch {interp delete y}
interp create x
@@ -4915,7 +4813,6 @@ test chan-io-38.2 {Tcl_SetChannelBufferSize, Tcl_GetChannelBufferSize} {
} {4096 10000 1 1 1 100000 1048576}
test chan-io-38.3 {Tcl_SetChannelBufferSize, changing buffersize between reads} {
# This test crashes the interp if Bug #427196 is not fixed
-
set chan [open [info script] r]
chan configure $chan -buffersize 10
set var [chan read $chan 2]
@@ -6516,25 +6413,21 @@ test chan-io-51.1 {Test old socket deletion on Macintosh} {socket} {
}
set ss [socket -server [namespace code accept] -myaddr 127.0.0.1 0]
set port [lindex [chan configure $ss -sockname] 2]
-
variable wait ""
set cs [socket 127.0.0.1 $port]
vwait [namespace which -variable wait]
lappend result [chan gets $cs]
chan close $cs
-
set wait ""
set cs [socket 127.0.0.1 $port]
vwait [namespace which -variable wait]
lappend result [chan gets $cs]
chan close $cs
-
set wait ""
set cs [socket 127.0.0.1 $port]
vwait [namespace which -variable wait]
lappend result [chan gets $cs]
chan close $cs
-
set wait ""
set cs [socket 127.0.0.1 $port]
vwait [namespace which -variable wait]
@@ -6717,66 +6610,48 @@ chan puts $out "\u0410\u0410"
chan close $out
test chan-io-52.9 {TclCopyChannel & encodings} {fcopy} {
# Copy kyrillic to UTF-8, using chan copy.
-
set in [open $path(kyrillic.txt) r]
set out [open $path(utf8-fcopy.txt) w]
-
chan configure $in -encoding koi8-r -translation lf
chan configure $out -encoding utf-8 -translation lf
-
chan copy $in $out
chan close $in
chan close $out
-
# Do the same again, but differently (read/chan puts).
-
set in [open $path(kyrillic.txt) r]
set out [open $path(utf8-rp.txt) w]
-
chan configure $in -encoding koi8-r -translation lf
chan configure $out -encoding utf-8 -translation lf
-
chan puts -nonewline $out [chan read $in]
-
chan close $in
chan close $out
-
list [file size $path(kyrillic.txt)] \
[file size $path(utf8-fcopy.txt)] \
[file size $path(utf8-rp.txt)]
} {3 5 5}
test chan-io-52.10 {TclCopyChannel & encodings} {fcopy} {
- # encoding to binary (=> implies that the
- # internal utf-8 is written)
-
+ # encoding to binary (=> implies that the internal utf-8 is written)
set in [open $path(kyrillic.txt) r]
set out [open $path(utf8-fcopy.txt) w]
-
chan configure $in -encoding koi8-r -translation lf
# -translation binary is also -encoding binary
chan configure $out -translation binary
-
chan copy $in $out
chan close $in
chan close $out
-
file size $path(utf8-fcopy.txt)
} 5
test chan-io-52.11 {TclCopyChannel & encodings} {fcopy} {
- # binary to encoding => the input has to be
- # in utf-8 to make sense to the encoder
-
+ # binary to encoding => the input has to be in utf-8 to make sense to the
+ # encoder
set in [open $path(utf8-fcopy.txt) r]
set out [open $path(kyrillic.txt) w]
-
# -translation binary is also -encoding binary
chan configure $in -translation binary
chan configure $out -encoding koi8-r -translation lf
-
chan copy $in $out
chan close $in
chan close $out
-
file size $path(kyrillic.txt)
} 3
@@ -7185,7 +7060,6 @@ test chan-io-53.10 {Bug 1350564, multi-directional fcopy} -setup {
test chan-io-54.1 {Recursive channel events} {socket fileevent} {
# This test checks to see if file events are delivered during recursive
# event loops when there is buffered data on the channel.
-
proc accept {s a p} {
variable as
chan configure $s -translation lf
@@ -7204,10 +7078,8 @@ test chan-io-54.1 {Recursive channel events} {socket fileevent} {
incr x
}
set ss [socket -server [namespace code accept] -myaddr 127.0.0.1 0]
-
- # We need to delay on some systems until the creation of the
- # server socket completes.
-
+ # We need to delay on some systems until the creation of the server socket
+ # completes.
set done 0
for {set i 0} {$i < 10} {incr i} {
if {![catch {set cs [socket 127.0.0.1 [lindex [chan configure $ss -sockname] 2]]}]} {
@@ -7241,18 +7113,14 @@ test chan-io-54.2 {Testing for busy-wait in recursive channel events} {socket fi
set after {}
variable s [socket -server [namespace code accept] -myaddr 127.0.0.1 0]
proc accept {s a p} {
- variable counter
- variable accept
-
- set accept $s
- set counter 0
+ variable counter 0
+ variable accept $s
chan configure $s -blocking off -buffering line -translation lf
chan event $s readable [namespace code "doit $s"]
}
proc doit {s} {
variable counter
variable after
-
incr counter
set l [chan gets $s]
if {"$l" == ""} {
@@ -7263,7 +7131,6 @@ test chan-io-54.2 {Testing for busy-wait in recursive channel events} {socket fi
proc doit1 {s} {
variable counter
variable accept
-
incr counter
set l [chan gets $s]
chan close $s
@@ -7272,7 +7139,6 @@ test chan-io-54.2 {Testing for busy-wait in recursive channel events} {socket fi
proc producer {} {
variable s
variable writer
-
set writer [socket 127.0.0.1 [lindex [chan configure $s -sockname] 2]]
chan configure $writer -buffering line
chan puts -nonewline $writer hello
@@ -7281,7 +7147,6 @@ test chan-io-54.2 {Testing for busy-wait in recursive channel events} {socket fi
proc newline {} {
variable done
variable writer
-
chan puts $writer hello
chan flush $writer
set done 1
@@ -7292,7 +7157,7 @@ test chan-io-54.2 {Testing for busy-wait in recursive channel events} {socket fi
chan close $writer
chan close $s
after cancel $after
- if {$accept != {}} {chan close $accept}
+ if {$accept ne {}} {chan close $accept}
set counter
} 1
@@ -7420,11 +7285,10 @@ test chan-io-58.1 {Tcl_NotifyChannel and error when closing} {stdio unixOrPc ope
test chan-io-59.1 {Thread reference of channels} {testmainthread testchannel} {
# TIP #10
- # More complicated tests (like that the reference changes as a
- # channel is moved from thread to thread) can be done only in the
- # extension which fully implements the moving of channels between
- # threads, i.e. 'Threads'. Or we have to extend [testthread] as well.
-
+ # More complicated tests (like that the reference changes as a channel is
+ # moved from thread to thread) can be done only in the extension which
+ # fully implements the moving of channels between threads, i.e. 'Threads'.
+ # Or we have to extend [testthread] as well.
set f [open $path(longfile) r]
set result [testchannel mthread $f]
chan close $f
@@ -7433,7 +7297,6 @@ test chan-io-59.1 {Thread reference of channels} {testmainthread testchannel} {
test chan-io-60.1 {writing illegal utf sequences} {openpipe fileevent} {
# This test will hang in older revisions of the core.
-
set out [open $path(script) w]
chan puts $out {
chan puts [encoding convertfrom identity \xe2]
@@ -7456,7 +7319,6 @@ test chan-io-60.1 {writing illegal utf sequences} {openpipe fileevent} {
variable x ""
set result ""
vwait [namespace which -variable x]
-
# cut of the remainder of the error stack, especially the filename
set result [lreplace $result 3 3 [lindex [split [lindex $result 3] \n] 0]]
list $x $result
@@ -7489,59 +7351,44 @@ test chan-io-61.1 {Reset eof state after changing the eof char} -setup {
removeFile eofchar
} -result {77 = 23431}
-
# Test the cutting and splicing of channels, this is incidentially the
-# attach/detach facility of package Thread, but __without any
-# safeguards__. It can also be used to emulate transfer of channels
-# between threads, and is used for that here.
+# attach/detach facility of package Thread, but __without any safeguards__. It
+# can also be used to emulate transfer of channels between threads, and is
+# used for that here.
test chan-io-70.0 {Cutting & Splicing channels} {testchannel} {
set f [makeFile {... dummy ...} cutsplice]
set c [open $f r]
-
set res {}
lappend res [catch {chan seek $c 0 start}]
testchannel cut $c
-
lappend res [catch {chan seek $c 0 start}]
testchannel splice $c
-
lappend res [catch {chan seek $c 0 start}]
chan close $c
-
removeFile cutsplice
-
set res
} {0 1 0}
-
-
-# Duplicate of code in "thread.test". Find a better way of doing this
-# without duplication. Maybe placement into a proc which transforms to
-# nop after the first call, and placement of its defintion in a
-# central location.
-
+# Duplicate of code in "thread.test". Find a better way of doing this without
+# duplication. Maybe placement into a proc which transforms to nop after the
+# first call, and placement of its defintion in a central location.
if {[testConstraint testthread]} {
testthread errorproc ThreadError
-
proc ThreadError {id info} {
global threadError
set threadError $info
}
-
proc ThreadNullError {id info} {
# ignore
}
}
-
test chan-io-70.1 {Transfer channel} {testchannel testthread} {
set f [makeFile {... dummy ...} cutsplice]
set c [open $f r]
-
set res {}
lappend res [catch {chan seek $c 0 start}]
testchannel cut $c
lappend res [catch {chan seek $c 0 start}]
-
set tid [testthread create]
testthread send $tid [list set c $c]
lappend res [testthread send $tid {
@@ -7550,10 +7397,8 @@ test chan-io-70.1 {Transfer channel} {testchannel testthread} {
chan close $c
set res
}]
-
tcltest::threadReap
removeFile cutsplice
-
set res
} {0 1 0}
@@ -7721,26 +7566,19 @@ foreach {n msg expected} {
f3 {-code boss -code 0 -level X -f ba} {-code 1 -level 0 -f ba}
} {
test chan-io-71.$n {Tcl_SetChannelError} {testchannel} {
-
set f [makeFile {... dummy ...} cutsplice]
set c [open $f r]
-
set res [testchannel setchannelerror $c [lrange $msg 0 end]]
chan close $c
removeFile cutsplice
-
set res
} [lrange $expected 0 end]
-
test chan-io-72.$n {Tcl_SetChannelErrorInterp} {testchannel} {
-
set f [makeFile {... dummy ...} cutsplice]
set c [open $f r]
-
set res [testchannel setchannelerrorinterp $c [lrange $msg 0 end]]
chan close $c
removeFile cutsplice
-
set res
} [lrange $expected 0 end]
}
@@ -7751,7 +7589,7 @@ test chan-io-73.1 {channel Tcl_Obj SetChannelFromAny} {} {
} {1}
# ### ### ### ######### ######### #########
-
+
# cleanup
foreach file [list fooBar longfile script output test1 pipe my_script \
test2 test3 cat stdout kyrillic.txt utf8-fcopy.txt utf8-rp.txt] {