1 files changed, 37 insertions, 37 deletions

diff --git a/tests/io.test b/tests/io.test
index 6b6ad6d..46856b6 100644
--- a/tests/io.test
+++ b/tests/io.test
@@ -123,10 +123,10 @@ test io-1.8 {Tcl_WriteChars: WriteChars} {
     # applied to tcl will cause tcl, more specifically WriteChars, to
     # go into an infinite loop.
 
-    set f [open $path(test2) w] 
-    fconfigure      $f -encoding iso2022-jp 
-    puts -nonewline $f [format %s%c [string repeat " " 4] 12399] 
-    close           $f 
+    set f [open $path(test2) w]
+    fconfigure      $f -encoding iso2022-jp
+    puts -nonewline $f [format %s%c [string repeat " " 4] 12399]
+    close           $f
     contents $path(test2)
 } "    \x1b\$B\$O\x1b(B"
 
@@ -192,7 +192,7 @@ test io-1.9 {Tcl_WriteChars: WriteChars} {
 
 test io-2.1 {WriteBytes} {
     # loop until all bytes are written
-    
+
     set f [open $path(test1) w]
     fconfigure $f  -encoding binary -buffersize 16 -translation crlf
     puts $f "abcdefghijklmnopqrstuvwxyz"
@@ -214,7 +214,7 @@ test io-2.3 {WriteBytes: flush on line} {
     # Tcl "line" buffering has weird behavior: if current buffer contains
     # a \n, entire buffer gets flushed.  Logical behavior would be to flush
     # only up to the \n.
-    
+
     set f [open $path(test1) w]
     fconfigure $f -encoding binary -buffering line -translation crlf
     puts -nonewline $f "\n12"
@@ -234,7 +234,7 @@ test io-2.4 {WriteBytes: reset sawLF after each buffer} {
 
 test io-3.1 {WriteChars: compatibility with WriteBytes} {
     # loop until all bytes are written
-    
+
     set f [open $path(test1) w]
     fconfigure $f -encoding ascii -buffersize 16 -translation crlf
     puts $f "abcdefghijklmnopqrstuvwxyz"
@@ -256,7 +256,7 @@ test io-3.3 {WriteChars: compatibility with WriteBytes: flush on line} {
     # Tcl "line" buffering has weird behavior: if current buffer contains
     # a \n, entire buffer gets flushed.  Logical behavior would be to flush
     # only up to the \n.
-    
+
     set f [open $path(test1) w]
     fconfigure $f -encoding ascii -buffering line -translation crlf
     puts -nonewline $f "\n12"
@@ -268,7 +268,7 @@ test io-3.4 {WriteChars: loop over stage buffer} {
     # stage buffer maps to more than can be queued at once.
 
     set f [open $path(test1) w]
-    fconfigure $f -encoding jis0208 -buffersize 16 
+    fconfigure $f -encoding jis0208 -buffersize 16
     puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
     set x [list [contents $path(test1)]]
     close $f
@@ -280,7 +280,7 @@ test io-3.5 {WriteChars: saved != 0} {
     # requested buffersize.
 
     set f [open $path(test1) w]
-    fconfigure $f -encoding jis0208 -buffersize 17 
+    fconfigure $f -encoding jis0208 -buffersize 17
     puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
     set x [list [contents $path(test1)]]
     close $f
@@ -311,7 +311,7 @@ test io-3.7 {WriteChars: (bufPtr->nextAdded > bufPtr->length)} {
     # of the next channel buffer.
 
     set f [open $path(test1) w]
-    fconfigure $f -encoding jis0208 -buffersize 17 
+    fconfigure $f -encoding jis0208 -buffersize 17
     puts -nonewline $f "\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\"
     set x [list [contents $path(test1)]]
     close $f
@@ -381,7 +381,7 @@ test io-4.5 {TranslateOutputEOL: crlf} {
 
 test io-5.1 {CheckFlush: not full} {
     set f [open $path(test1) w]
-    fconfigure $f 
+    fconfigure $f
     puts -nonewline $f "12345678901234567890"
     set x [list [contents $path(test1)]]
     close $f
@@ -470,7 +470,7 @@ set a "bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb"
 append a $a
 append a $a
 test io-6.6 {Tcl_GetsObj: loop test} {
-    # if (dst >= dstEnd) 
+    # if (dst >= dstEnd)
 
     set f [open $path(test1) w]
     puts $f $a
@@ -769,7 +769,7 @@ test io-6.32 {Tcl_GetsObj: crlf mode: buffer exhausted, more data} {testchannel}
 } [list 15 "123456789012345" 17 3]
 test io-6.33 {Tcl_GetsObj: crlf mode: buffer exhausted, at eof} {
     # eol still equals dstEnd
-    
+
     set f [open $path(test1) w]
     fconfigure $f -translation lf
     puts -nonewline $f "123456789012345\r"
@@ -781,8 +781,8 @@ test io-6.33 {Tcl_GetsObj: crlf mode: buffer exhausted, at eof} {
     set x
 } [list 16 "123456789012345\r" 1]
 test io-6.34 {Tcl_GetsObj: crlf mode: buffer exhausted, not followed by \n} {
-    # not (*eol == '\n') 
-    
+    # not (*eol == '\n')
+
     set f [open $path(test1) w]
     fconfigure $f -translation lf
     puts -nonewline $f "123456789012345\rabcd\r\nefg"
@@ -889,7 +889,7 @@ test io-6.43 {Tcl_GetsObj: input saw cr} {stdio testchannel openpipe fileevent}
     fconfigure $f -buffersize 16
     set x [list [gets $f]]
     fconfigure $f -blocking 0
-    lappend x [gets $f line] $line [testchannel queuedcr $f] 
+    lappend x [gets $f line] $line [testchannel queuedcr $f]
     fconfigure $f -blocking 1
     puts -nonewline $f "\nabcd\refg\x1a"
     lappend x [gets $f line] $line [testchannel queuedcr $f]
@@ -898,7 +898,7 @@ test io-6.43 {Tcl_GetsObj: input saw cr} {stdio testchannel openpipe fileevent}
     set x
 } [list "bbbbbbbbbbbbbbb" 15 "123456789abcdef" 1 4 "abcd" 0 3 "efg"]
 test io-6.44 {Tcl_GetsObj: input saw cr, not followed by cr} {stdio testchannel openpipe fileevent} {
-    # not (*eol == '\n') 
+    # not (*eol == '\n')
 
     set f [open "|[list [interpreter] $path(cat)]" w+]
     fconfigure $f -translation {auto lf} -buffering none
@@ -906,7 +906,7 @@ test io-6.44 {Tcl_GetsObj: input saw cr, not followed by cr} {stdio testchannel
     fconfigure $f -buffersize 16
     set x [list [gets $f]]
     fconfigure $f -blocking 0
-    lappend x [gets $f line] $line [testchannel queuedcr $f] 
+    lappend x [gets $f line] $line [testchannel queuedcr $f]
     fconfigure $f -blocking 1
     puts -nonewline $f "abcd\refg\x1a"
     lappend x [gets $f line] $line [testchannel queuedcr $f]
@@ -959,10 +959,10 @@ test io-6.47 {Tcl_GetsObj: auto mode: \r at end of buffer, peek for \n} {testcha
     set x [list [gets $f] [testchannel inputbuffered $f]]
     close $f
     set x
-} [list "123456789012345" 15]    
+} [list "123456789012345" 15]
 test io-6.48 {Tcl_GetsObj: auto mode: \r at end of buffer, no more avail} {testchannel} {
     # PeekAhead() did not get any, so (eol >= dstEnd)
-    
+
     set f [open $path(test1) w]
     fconfigure $f -translation lf
     puts -nonewline $f "123456789012345\r"
@@ -975,7 +975,7 @@ test io-6.48 {Tcl_GetsObj: auto mode: \r at end of buffer, no more avail} {testc
 } [list "123456789012345" 1]
 test io-6.49 {Tcl_GetsObj: auto mode: \r followed by \n} {testchannel} {
     # if (*eol == '\n') {skip++}
-    
+
     set f [open $path(test1) w]
     fconfigure $f -translation lf
     puts -nonewline $f "123456\r\n78901"
@@ -986,8 +986,8 @@ test io-6.49 {Tcl_GetsObj: auto mode: \r followed by \n} {testchannel} {
     set x
 } [list "123456" 0 8 "78901"]
 test io-6.50 {Tcl_GetsObj: auto mode: \r not followed by \n} {testchannel} {
-    # not (*eol == '\n') 
-    
+    # not (*eol == '\n')
+
     set f [open $path(test1) w]
     fconfigure $f -translation lf
     puts -nonewline $f "123456\r78901"
@@ -999,7 +999,7 @@ test io-6.50 {Tcl_GetsObj: auto mode: \r not followed by \n} {testchannel} {
 } [list "123456" 0 7 "78901"]
 test io-6.51 {Tcl_GetsObj: auto mode: \n} {
     # else if (*eol == '\n') {goto gotoeol;}
-    
+
     set f [open $path(test1) w]
     fconfigure $f -translation lf
     puts -nonewline $f "123456\n78901"
@@ -1092,7 +1092,7 @@ test io-7.1 {FilterInputBytes: split up character at end of buffer} {
 } "1234567890123\uff10\uff11\uff12\uff13\uff14"
 test io-7.2 {FilterInputBytes: split up character in middle of buffer} {
     # (bufPtr->nextAdded < bufPtr->bufLength)
-    
+
     set f [open $path(test1) w]
     fconfigure $f -encoding binary
     puts -nonewline $f "1234567890\n123\x82\x4f\x82\x50\x82"
@@ -1201,7 +1201,7 @@ test io-8.4 {PeekAhead: cached data available in this buffer} {
 
     set x [gets $f]
     close $f
-    set x    
+    set x
 } $a
 unset a
 test io-8.5 {PeekAhead: don't peek if last read was short} {stdio testchannel openpipe fileevent} {
@@ -1217,7 +1217,7 @@ test io-8.5 {PeekAhead: don't peek if last read was short} {stdio testchannel op
     set x
 } {15 abcdefghijklmno 1}
 test io-8.6 {PeekAhead: change to non-blocking mode} {stdio testchannel openpipe fileevent} {
-    # ((chanPtr->flags & CHANNEL_NONBLOCKING) == 0) 
+    # ((chanPtr->flags & CHANNEL_NONBLOCKING) == 0)
 
     set f [open "|[list [interpreter] $path(cat)]" w+]
     fconfigure $f -translation {auto binary} -buffersize 16
@@ -1574,7 +1574,7 @@ test io-13.2 {TranslateInputEOL: crlf mode} {
     set x
 } "abcd\ndef\n"
 test io-13.3 {TranslateInputEOL: crlf mode: naked cr} {
-    # (src >= srcMax) 
+    # (src >= srcMax)
 
     set f [open $path(test1) w]
     fconfigure $f -translation lf
@@ -1587,7 +1587,7 @@ test io-13.3 {TranslateInputEOL: crlf mode: naked cr} {
     set x
 } "abcd\ndef\r"
 test io-13.4 {TranslateInputEOL: crlf mode: cr followed by not \n} {
-    # (src >= srcMax) 
+    # (src >= srcMax)
 
     set f [open $path(test1) w]
     fconfigure $f -translation lf
@@ -1600,7 +1600,7 @@ test io-13.4 {TranslateInputEOL: crlf mode: cr followed by not \n} {
     set x
 } "abcd\ndef\rfgh"
 test io-13.5 {TranslateInputEOL: crlf mode: naked lf} {
-    # (src >= srcMax) 
+    # (src >= srcMax)
 
     set f [open $path(test1) w]
     fconfigure $f -translation lf
@@ -1715,7 +1715,7 @@ test io-13.9 {TranslateInputEOL: auto mode: \r followed by not \n} {
     set x
 } "abcd\ndef"
 test io-13.10 {TranslateInputEOL: auto mode: \n} {
-    # not (*src == '\r') 
+    # not (*src == '\r')
 
     set f [open $path(test1) w]
     fconfigure $f -translation lf
@@ -2064,7 +2064,7 @@ test io-20.1 {Tcl_CreateChannel: initial settings} {
     encoding system $old
 	close $a
     set x
-} {ascii}    
+} {ascii}
 test io-20.2 {Tcl_CreateChannel: initial settings} {win} {
     set f [open $path(test1) w+]
     set x [list [fconfigure $f -eofchar] [fconfigure $f -translation]]
@@ -2159,7 +2159,7 @@ test io-26.1 {Tcl_GetChannelInstanceData} {stdio openpipe} {
     set f [open "|[list [interpreter] << exit]"]
     expr [pid $f]
     close $f
-} {}    
+} {}
 
 # Test flushing. The functions tested here are FlushChannel.
 
@@ -3057,7 +3057,7 @@ test io-30.6 {Tcl_Write cr, Tcl_Read crlf} {
     fconfigure $f -translation crlf
     set x [read $f]
     close $f
-    set x 
+    set x
 } "hello\rthere\rand\rhere\r"
 test io-30.7 {Tcl_Write crlf, Tcl_Read crlf} {
     file delete $path(test1)
@@ -3985,7 +3985,7 @@ test io-31.31 {Tcl_Write crlf on block boundary, Tcl_Gets crlf} {
     }
     close $f
     set f [open $path(test1) r]
-    fconfigure $f -translation crlf 
+    fconfigure $f -translation crlf
     set c ""
     while {[gets $f line] >= 0} {
 	append c $line\n
@@ -5467,7 +5467,7 @@ test io-39.13 {Tcl_SetChannelOption, Tcl_GetChannelOption, buffer size} {
 test io-39.14 {Tcl_SetChannelOption: -encoding, binary & utf-8} {
     file delete $path(test1)
     set f [open $path(test1) w]
-    fconfigure $f -encoding {} 
+    fconfigure $f -encoding {}
     puts -nonewline $f \xe7\x89\xa6
     close $f
     set f [open $path(test1) r]