diff options
Diffstat (limited to 'tests/ioUtil.test')
| -rw-r--r-- | tests/ioUtil.test | 331 |
1 files changed, 0 insertions, 331 deletions
diff --git a/tests/ioUtil.test b/tests/ioUtil.test deleted file mode 100644 index 7e8687e..0000000 --- a/tests/ioUtil.test +++ /dev/null @@ -1,331 +0,0 @@ -# This file (ioUtil.test) tests the hookable TclStat(), TclAccess(), -# and Tcl_OpenFileChannel, routines in the file generic/tclIOUtils.c. -# Sourcing this file into Tcl runs the tests and generates output for -# errors. No output means no errors were found. -# -# Copyright (c) 1998-1999 by Scriptics Corporation. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. - -if {[lsearch [namespace children] ::tcltest] == -1} { - package require tcltest 2 - namespace import -force ::tcltest::* -} - -testConstraint testopenfilechannelproc \ - [llength [info commands testopenfilechannelproc]] -testConstraint testaccessproc [llength [info commands testaccessproc]] -testConstraint teststatproc [llength [info commands teststatproc]] - -set unsetScript { - catch {unset testStat1(size)} - catch {unset testStat2(size)} - catch {unset testStat3(size)} -} - -test ioUtil-1.1 {TclStat: Check that none of the test procs are there.} {} { - catch {file stat testStat1%.fil testStat1} err1 - catch {file stat testStat2%.fil testStat2} err2 - catch {file stat testStat3%.fil testStat3} err3 - list $err1 $err2 $err3 -} {{could not read "testStat1%.fil": no such file or directory} {could not read "testStat2%.fil": no such file or directory} {could not read "testStat3%.fil": no such file or directory}} - -test ioUtil-1.2 {TclStatInsertProc: Insert the 3 test TclStat_ procedures.} {teststatproc} { - catch {teststatproc insert TclpStat} err1 - teststatproc insert TestStatProc1 - teststatproc insert TestStatProc2 - teststatproc insert TestStatProc3 - set err1 -} {bad arg "insert": must be TestStatProc1, TestStatProc2, or TestStatProc3} - -test ioUtil-1.3 {TclStat: Use "file stat ?" to invoke each procedure.} {teststatproc} { - file stat testStat2%.fil testStat2 - file stat testStat1%.fil testStat1 - file stat testStat3%.fil testStat3 - - list $testStat2(size) $testStat1(size) $testStat3(size) -} {2345 1234 3456} - -eval $unsetScript - -test ioUtil-1.4 {TclStatDeleteProc: "TclpStat" function should not be deletable.} {teststatproc} { - catch {teststatproc delete TclpStat} err2 - set err2 -} {"TclpStat": could not be deleteed} - -test ioUtil-1.5 {TclStatDeleteProc: Delete the 2nd TclStat procedure.} {teststatproc} { - # Delete the 2nd procedure and test that it longer exists but that - # the others do actually return a result. - - teststatproc delete TestStatProc2 - file stat testStat1%.fil testStat1 - catch {file stat testStat2%.fil testStat2} err3 - file stat testStat3%.fil testStat3 - - list $testStat1(size) $err3 $testStat3(size) -} {1234 {could not read "testStat2%.fil": no such file or directory} 3456} - -eval $unsetScript - -test ioUtil-1.6 {TclStatDeleteProc: Delete the 1st TclStat procedure.} {teststatproc} { - # Next delete the 1st procedure and test that only the 3rd procedure - # is the only one that exists. - - teststatproc delete TestStatProc1 - catch {file stat testStat1%.fil testStat1} err4 - catch {file stat testStat2%.fil testStat2} err5 - file stat testStat3%.fil testStat3 - - list $err4 $err5 $testStat3(size) -} {{could not read "testStat1%.fil": no such file or directory} {could not read "testStat2%.fil": no such file or directory} 3456} - -eval $unsetScript - -test ioUtil-1.7 {TclStatDeleteProc: Delete the 3rd procedure & verify all are gone.} {teststatproc} { - # Finally delete the 3rd procedure and check that none of the - # procedures exist. - - teststatproc delete TestStatProc3 - catch {file stat testStat1%.fil testStat1} err6 - catch {file stat testStat2%.fil testStat2} err7 - catch {file stat testStat3%.fil testStat3} err8 - - list $err6 $err7 $err8 -} {{could not read "testStat1%.fil": no such file or directory} {could not read "testStat2%.fil": no such file or directory} {could not read "testStat3%.fil": no such file or directory}} - -eval $unsetScript - -test ioUtil-1.8 {TclStatDeleteProc: Verify that all procs have been deleted.} {teststatproc} { - # Attempt to delete all the Stat procs. again to ensure they no longer - # exist and an error is returned. - - catch {teststatproc delete TestStatProc1} err9 - catch {teststatproc delete TestStatProc2} err10 - catch {teststatproc delete TestStatProc3} err11 - - list $err9 $err10 $err11 -} {{"TestStatProc1": could not be deleteed} {"TestStatProc2": could not be deleteed} {"TestStatProc3": could not be deleteed}} - -eval $unsetScript - -test ioUtil-1.9 {TclAccess: Check that none of the test procs are there.} { - catch {file exists testAccess1%.fil} err1 - catch {file exists testAccess2%.fil} err2 - catch {file exists testAccess3%.fil} err3 - list $err1 $err2 $err3 -} {0 0 0} - -test ioUtil-1.10 {TclAccessInsertProc: Insert the 3 test TclAccess_ procedures.} {testaccessproc} { - catch {testaccessproc insert TclpAccess} err1 - testaccessproc insert TestAccessProc1 - testaccessproc insert TestAccessProc2 - testaccessproc insert TestAccessProc3 - set err1 -} {bad arg "insert": must be TestAccessProc1, TestAccessProc2, or TestAccessProc3} - -test ioUtil-2.3 {TclAccess: Use "file access ?" to invoke each procedure.} {testaccessproc} { - list [file exists testAccess2%.fil] \ - [file exists testAccess1%.fil] \ - [file exists testAccess3%.fil] -} {1 1 1} - -test ioUtil-2.4 {TclAccessDeleteProc: "TclpAccess" function should not be deletable.} {testaccessproc} { - catch {testaccessproc delete TclpAccess} err2 - set err2 -} {"TclpAccess": could not be deleteed} - -test ioUtil-2.5 {TclAccessDeleteProc: Delete the 2nd TclAccess procedure.} {testaccessproc} { - # Delete the 2nd procedure and test that it longer exists but that - # the others do actually return a result. - - testaccessproc delete TestAccessProc2 - set res1 [file exists testAccess1%.fil] - catch {file exists testAccess2%.fil} err3 - set res2 [file exists testAccess3%.fil] - - list $res1 $err3 $res2 -} {1 0 1} - -test ioUtil-2.6 {TclAccessDeleteProc: Delete the 1st TclAccess procedure.} {testaccessproc} { - # Next delete the 1st procedure and test that only the 3rd procedure - # is the only one that exists. - - testaccessproc delete TestAccessProc1 - catch {file exists testAccess1%.fil} err4 - catch {file exists testAccess2%.fil} err5 - set res3 [file exists testAccess3%.fil] - - list $err4 $err5 $res3 -} {0 0 1} - -test ioUtil-2.7 {TclAccessDeleteProc: Delete the 3rd procedure & verify all are gone.} {testaccessproc} { - # Finally delete the 3rd procedure and check that none of the - # procedures exist. - - testaccessproc delete TestAccessProc3 - catch {file exists testAccess1%.fil} err6 - catch {file exists testAccess2%.fil} err7 - catch {file exists testAccess3%.fil} err8 - - list $err6 $err7 $err8 -} {0 0 0} - -test ioUtil-2.8 {TclAccessDeleteProc: Verify that all procs have been deleted.} {testaccessproc} { - # Attempt to delete all the Access procs. again to ensure they no longer - # exist and an error is returned. - - catch {testaccessproc delete TestAccessProc1} err9 - catch {testaccessproc delete TestAccessProc2} err10 - catch {testaccessproc delete TestAccessProc3} err11 - - list $err9 $err10 $err11 -} {{"TestAccessProc1": could not be deleteed} {"TestAccessProc2": could not be deleteed} {"TestAccessProc3": could not be deleteed}} - -# Some of the following tests require a writable current directory -set oldpwd [pwd] -cd [temporaryDirectory] - -test ioUtil-3.1 {TclOpenFileChannel: Check that none of the test procs are there.} {testopenfilechannelproc} { - catch {file delete -force {*}[glob *testOpenFileChannel*]} - catch {file exists testOpenFileChannel1%.fil} err1 - catch {file exists testOpenFileChannel2%.fil} err2 - catch {file exists testOpenFileChannel3%.fil} err3 - catch {file exists __testOpenFileChannel1%__.fil} err4 - catch {file exists __testOpenFileChannel2%__.fil} err5 - catch {file exists __testOpenFileChannel3%__.fil} err6 - list $err1 $err2 $err3 $err4 $err5 $err6 -} {0 0 0 0 0 0} - -test ioUtil-3.2 {TclOpenFileChannelInsertProc: Insert the 3 test TclOpenFileChannel_ procedures.} {testopenfilechannelproc} { - catch {testopenfilechannelproc insert TclpOpenFileChannel} err1 - testopenfilechannelproc insert TestOpenFileChannelProc1 - testopenfilechannelproc insert TestOpenFileChannelProc2 - testopenfilechannelproc insert TestOpenFileChannelProc3 - set err1 -} {bad arg "insert": must be TestOpenFileChannelProc1, TestOpenFileChannelProc2, or TestOpenFileChannelProc3} - -test ioUtil-3.3 {TclOpenFileChannel: Use "file openfilechannel ?" to invoke each procedure.} {testopenfilechannelproc} { - close [open __testOpenFileChannel1%__.fil w] - close [open __testOpenFileChannel2%__.fil w] - close [open __testOpenFileChannel3%__.fil w] - - catch { - close [open testOpenFileChannel1%.fil r] - close [open testOpenFileChannel2%.fil r] - close [open testOpenFileChannel3%.fil r] - } err - - file delete __testOpenFileChannel1%__.fil - file delete __testOpenFileChannel2%__.fil - file delete __testOpenFileChannel3%__.fil - - set err -} {} - -test ioUtil-3.4 {TclOpenFileChannelDeleteProc: "TclpOpenFileChannel" function should not be deletable.} {testopenfilechannelproc} { - catch {testopenfilechannelproc delete TclpOpenFileChannel} err2 - set err2 -} {"TclpOpenFileChannel": could not be deleteed} - -test ioUtil-3.5 {TclOpenFileChannelDeleteProc: Delete the 2nd TclOpenFileChannel procedure.} {testopenfilechannelproc} { - # Delete the 2nd procedure and test that it longer exists but that - # the others do actually return a result. - - testopenfilechannelproc delete TestOpenFileChannelProc2 - - close [open __testOpenFileChannel1%__.fil w] - close [open __testOpenFileChannel3%__.fil w] - - catch { - close [open testOpenFileChannel1%.fil r] - catch {close [open testOpenFileChannel2%.fil r]} msg1 - close [open testOpenFileChannel3%.fil r] - } err3 - - file delete __testOpenFileChannel1%__.fil - file delete __testOpenFileChannel3%__.fil - - list $err3 $msg1 -} {{} {couldn't open "testOpenFileChannel2%.fil": no such file or directory}} - -test ioUtil-3.6 {TclOpenFileChannelDeleteProc: Delete the 1st TclOpenFileChannel procedure.} {testopenfilechannelproc} { - # Next delete the 1st procedure and test that only the 3rd procedure - # is the only one that exists. - - testopenfilechannelproc delete TestOpenFileChannelProc1 - - close [open __testOpenFileChannel3%__.fil w] - - catch { - catch {close [open testOpenFileChannel1%.fil r]} msg2 - catch {close [open testOpenFileChannel2%.fil r]} msg3 - close [open testOpenFileChannel3%.fil r] - } err4 - - file delete __testOpenFileChannel3%__.fil - - list $err4 $msg2 $msg3 -} [list {} \ - {couldn't open "testOpenFileChannel1%.fil": no such file or directory}\ - {couldn't open "testOpenFileChannel2%.fil": no such file or directory}] - -test ioUtil-3.7 {TclOpenFileChannelDeleteProc: Delete the 3rd procedure & verify all are gone.} {testopenfilechannelproc} { - # Finally delete the 3rd procedure and check that none of the - # procedures exist. - - testopenfilechannelproc delete TestOpenFileChannelProc3 - catch { - catch {close [open testOpenFileChannel1%.fil r]} msg4 - catch {close [open testOpenFileChannel2%.fil r]} msg5 - catch {close [open testOpenFileChannel3%.fil r]} msg6 - } err5 - - list $err5 $msg4 $msg5 $msg6 -} [list 1 \ - {couldn't open "testOpenFileChannel1%.fil": no such file or directory}\ - {couldn't open "testOpenFileChannel2%.fil": no such file or directory}\ - {couldn't open "testOpenFileChannel3%.fil": no such file or directory}] - -test ioUtil-3.8 {TclOpenFileChannelDeleteProc: Verify that all procs have been deleted.} {testopenfilechannelproc} { - - # Attempt to delete all the OpenFileChannel procs. again to ensure they no - # longer exist and an error is returned. - - catch {testopenfilechannelproc delete TestOpenFileChannelProc1} err9 - catch {testopenfilechannelproc delete TestOpenFileChannelProc2} err10 - catch {testopenfilechannelproc delete TestOpenFileChannelProc3} err11 - - list $err9 $err10 $err11 -} {{"TestOpenFileChannelProc1": could not be deleteed} {"TestOpenFileChannelProc2": could not be deleteed} {"TestOpenFileChannelProc3": could not be deleteed}} - -test ioUtil-4.1 {open ... a+ must not use O_APPEND: Bug 1773127} -setup { - set f [tcltest::makeFile {} ioutil41.tmp] - set fid [open $f wb] - puts -nonewline $fid 123 - close $fid -} -body { - set fid [open $f ab+] - puts -nonewline $fid 456 - seek $fid 2 - set d [read $fid 2] - seek $fid 4 - puts -nonewline $fid x - close $fid - set fid [open $f rb] - append d [read $fid] - close $fid - return $d -} -cleanup { - tcltest::removeFile $f -} -result 341234x6 - -cd $oldpwd - -# cleanup -::tcltest::cleanupTests -return - -# Local Variables: -# mode: tcl -# End: |