summaryrefslogtreecommitdiffstats
path: root/tests/socket.test
diff options
context:
space:
mode:
Diffstat (limited to 'tests/socket.test')
-rw-r--r--tests/socket.test1344
1 files changed, 1344 insertions, 0 deletions
diff --git a/tests/socket.test b/tests/socket.test
new file mode 100644
index 0000000..b2719de
--- /dev/null
+++ b/tests/socket.test
@@ -0,0 +1,1344 @@
+# Commands tested in this file: socket.
+#
+# This file contains a collection of tests for one or more of the Tcl
+# built-in commands. Sourcing this file into Tcl runs the tests and
+# generates output for errors. No output means no errors were found.
+#
+# Copyright (c) 1994-1996 Sun Microsystems, Inc.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Running socket tests with a remote server:
+# ------------------------------------------
+#
+# Some tests in socket.test depend on the existence of a remote server to
+# which they connect. The remote server must be an instance of tcltest and it
+# must run the script found in the file "remote.tcl" in this directory. You
+# can start the remote server on any machine reachable from the machine on
+# which you want to run the socket tests, by issuing:
+#
+# tcltest remote.tcl -port 2048 # Or choose another port number.
+#
+# If the machine you are running the remote server on has several IP
+# interfaces, you can choose which interface the server listens on for
+# connections by specifying the -address command line flag, so:
+#
+# tcltest remote.tcl -address your.machine.com
+#
+# These options can also be set by environment variables. On Unix, you can
+# type these commands to the shell from which the remote server is started:
+#
+# shell% setenv serverPort 2048
+# shell% setenv serverAddress your.machine.com
+#
+# and subsequently you can start the remote server with:
+#
+# tcltest remote.tcl
+#
+# to have it listen on port 2048 on the interface your.machine.com.
+#
+# When the server starts, it prints out a detailed message containing its
+# configuration information, and it will block until killed with a Ctrl-C.
+# Once the remote server exists, you can run the tests in socket.test with
+# the server by setting two Tcl variables:
+#
+# % set remoteServerIP <name or address of machine on which server runs>
+# % set remoteServerPort 2048
+#
+# These variables are also settable from the environment. On Unix, you can:
+#
+# shell% setenv remoteServerIP machine.where.server.runs
+# shell% senetv remoteServerPort 2048
+#
+# The preamble of the socket.test file checks to see if the variables are set
+# either in Tcl or in the environment; if they are, it attempts to connect to
+# the server. If the connection is successful, the tests using the remote
+# server will be performed; otherwise, it will attempt to start the remote
+# server (via exec) on platforms that support this, on the local host,
+# listening at port 2048. If all fails, a message is printed and the tests
+# using the remote server are not performed.
+#
+# SCCS: @(#) socket.test 1.83 97/09/15 16:29:47
+
+if {[string compare test [info procs test]] == 1} then {source defs}
+
+if {$testConfig(socket) == 0} {
+ return
+}
+
+#
+# If remoteServerIP or remoteServerPort are not set, check in the
+# environment variables for externally set values.
+#
+
+if {![info exists remoteServerIP]} {
+ if {[info exists env(remoteServerIP)]} {
+ set remoteServerIP $env(remoteServerIP)
+ }
+}
+if {![info exists remoteServerPort]} {
+ if {[info exists env(remoteServerIP)]} {
+ set remoteServerPort $env(remoteServerPort)
+ } else {
+ if {[info exists remoteServerIP]} {
+ set remoteServerPort 2048
+ }
+ }
+}
+
+#
+# Check if we're supposed to do tests against the remote server
+#
+
+set doTestsWithRemoteServer 1
+if {![info exists remoteServerIP] && ($tcl_platform(platform) != "macintosh")} {
+ set remoteServerIP localhost
+}
+if {($doTestsWithRemoteServer == 1) && (![info exists remoteServerPort])} {
+ set remoteServerPort 2048
+}
+
+# Attempt to connect to a remote server if one is already running. If it
+# is not running or for some other reason the connect fails, attempt to
+# start the remote server on the local host listening on port 2048. This
+# is only done on platforms that support exec (i.e. not on the Mac). On
+# platforms that do not support exec, the remote server must be started
+# by the user before running the tests.
+
+set remoteProcChan ""
+set commandSocket ""
+if {$doTestsWithRemoteServer} {
+ catch {close $commandSocket}
+ if {[catch {set commandSocket [socket $remoteServerIP \
+ $remoteServerPort]}] != 0} {
+ if {[info commands exec] == ""} {
+ set noRemoteTestReason "can't exec"
+ set doTestsWithRemoteServer 0
+ } elseif {$testConfig(win32s)} {
+ set noRemoteTestReason "\ncan't run multiple instances of tcltest under win32s."
+ set doTestsWithRemoteServer 0
+ } else {
+ set remoteServerIP localhost
+ if {[catch {set remoteProcChan \
+ [open "|[list $tcltest remote.tcl \
+ -serverIsSilent \
+ -port $remoteServerPort \
+ -address $remoteServerIP]" \
+ w+]} \
+ msg] == 0} {
+ after 1000
+ if {[catch {set commandSocket [socket $remoteServerIP \
+ $remoteServerPort]} msg] == 0} {
+ fconfigure $commandSocket -translation crlf -buffering line
+ } else {
+ set noRemoteTestReason $msg
+ set doTestsWithRemoteServer 0
+ }
+ } else {
+ set noRemoteTestReason "$msg $tcltest"
+ set doTestsWithRemoteServer 0
+ }
+ }
+ } else {
+ fconfigure $commandSocket -translation crlf -buffering line
+ }
+}
+
+if {$doTestsWithRemoteServer == 0} {
+ puts "Skipping tests with remote server. See tests/socket.test for"
+ puts "information on how to run remote server."
+ if {[info exists VERBOSE] && ($VERBOSE != 0)} {
+ puts "Reason for not doing remote tests: $noRemoteTestReason"
+ }
+}
+
+#
+# If we do the tests, define a command to send a command to the
+# remote server.
+#
+
+if {$doTestsWithRemoteServer == 1} {
+ proc sendCommand {c} {
+ global commandSocket
+
+ if {[eof $commandSocket]} {
+ error "remote server disappeared"
+ }
+
+ if {[catch {puts $commandSocket $c} msg]} {
+ error "remote server disappaered: $msg"
+ }
+ if {[catch {puts $commandSocket "--Marker--Marker--Marker--"} msg]} {
+ error "remote server disappeared: $msg"
+ }
+
+ set resp ""
+ while {1} {
+ set line [gets $commandSocket]
+ if {[eof $commandSocket]} {
+ error "remote server disappaered"
+ }
+ if {[string compare $line "--Marker--Marker--Marker--"] == 0} {
+ if {[string compare [lindex $resp 0] error] == 0} {
+ error [lindex $resp 1]
+ } else {
+ return [lindex $resp 1]
+ }
+ } else {
+ append resp $line "\n"
+ }
+ }
+ }
+}
+
+test socket-1.1 {arg parsing for socket command} {
+ list [catch {socket -server} msg] $msg
+} {1 {no argument given for -server option}}
+test socket-1.2 {arg parsing for socket command} {
+ list [catch {socket -server foo} msg] $msg
+} {1 {wrong # args: should be either:
+socket ?-myaddr addr? ?-myport myport? ?-async? host port
+socket -server command ?-myaddr addr? port}}
+test socket-1.3 {arg parsing for socket command} {
+ list [catch {socket -myaddr} msg] $msg
+} {1 {no argument given for -myaddr option}}
+test socket-1.4 {arg parsing for socket command} {
+ list [catch {socket -myaddr 127.0.0.1} msg] $msg
+} {1 {wrong # args: should be either:
+socket ?-myaddr addr? ?-myport myport? ?-async? host port
+socket -server command ?-myaddr addr? port}}
+test socket-1.5 {arg parsing for socket command} {
+ list [catch {socket -myport} msg] $msg
+} {1 {no argument given for -myport option}}
+test socket-1.6 {arg parsing for socket command} {
+ list [catch {socket -myport xxxx} msg] $msg
+} {1 {expected integer but got "xxxx"}}
+test socket-1.7 {arg parsing for socket command} {
+ list [catch {socket -myport 2522} msg] $msg
+} {1 {wrong # args: should be either:
+socket ?-myaddr addr? ?-myport myport? ?-async? host port
+socket -server command ?-myaddr addr? port}}
+test socket-1.8 {arg parsing for socket command} {
+ list [catch {socket -froboz} msg] $msg
+} {1 {bad option "-froboz", must be -async, -myaddr, -myport, or -server}}
+test socket-1.9 {arg parsing for socket command} {
+ list [catch {socket -server foo -myport 2521 3333} msg] $msg
+} {1 {Option -myport is not valid for servers}}
+test socket-1.10 {arg parsing for socket command} {
+ list [catch {socket host 2528 -junk} msg] $msg
+} {1 {wrong # args: should be either:
+socket ?-myaddr addr? ?-myport myport? ?-async? host port
+socket -server command ?-myaddr addr? port}}
+test socket-1.11 {arg parsing for socket command} {
+ list [catch {socket -server callback 2520 --} msg] $msg
+} {1 {wrong # args: should be either:
+socket ?-myaddr addr? ?-myport myport? ?-async? host port
+socket -server command ?-myaddr addr? port}}
+test socket-1.12 {arg parsing for socket command} {
+ list [catch {socket foo badport} msg] $msg
+} {1 {expected integer but got "badport"}}
+
+test socket-2.1 {tcp connection} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ set timer [after 2000 "set x timed_out"]
+ set f [socket -server accept 2828]
+ proc accept {file addr port} {
+ global x
+ set x done
+ close $file
+ }
+ puts ready
+ vwait x
+ after cancel $timer
+ close $f
+ puts $x
+ }
+ close $f
+ set f [open "|[list $tcltest script]" r]
+ gets $f x
+ if {[catch {socket localhost 2828} msg]} {
+ set x $msg
+ } else {
+ lappend x [gets $f]
+ close $msg
+ }
+ lappend x [gets $f]
+ close $f
+ set x
+} {ready done {}}
+
+if [info exists port] {
+ incr port
+} else {
+ set port [expr 2048 + [pid]%1024]
+}
+test socket-2.2 {tcp connection with client port specified} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ set timer [after 2000 "set x done"]
+ set f [socket -server accept 2828]
+ proc accept {file addr port} {
+ global x
+ puts "[gets $file] $port"
+ close $file
+ set x done
+ }
+ puts ready
+ vwait x
+ after cancel $timer
+ close $f
+ }
+ close $f
+ set f [open "|[list $tcltest script]" r]
+ gets $f x
+ global port
+ if {[catch {socket -myport $port localhost 2828} sock]} {
+ set x $sock
+ close [socket localhost 2828]
+ puts stderr $sock
+ } else {
+ puts $sock hello
+ flush $sock
+ lappend x [gets $f]
+ close $sock
+ }
+ close $f
+ set x
+} [list ready "hello $port"]
+test socket-2.3 {tcp connection with client interface specified} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ set timer [after 2000 "set x done"]
+ set f [socket -server accept 2828]
+ proc accept {file addr port} {
+ global x
+ puts "[gets $file] $addr"
+ close $file
+ set x done
+ }
+ puts ready
+ vwait x
+ after cancel $timer
+ close $f
+ }
+ close $f
+ set f [open "|[list $tcltest script]" r]
+ gets $f x
+ if {[catch {socket -myaddr localhost localhost 2828} sock]} {
+ set x $sock
+ } else {
+ puts $sock hello
+ flush $sock
+ lappend x [gets $f]
+ close $sock
+ }
+ close $f
+ set x
+} {ready {hello 127.0.0.1}}
+test socket-2.4 {tcp connection with server interface specified} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ set timer [after 2000 "set x done"]
+ set f [socket -server accept -myaddr [info hostname] 2828]
+ proc accept {file addr port} {
+ global x
+ puts "[gets $file]"
+ close $file
+ set x done
+ }
+ puts ready
+ vwait x
+ after cancel $timer
+ close $f
+ }
+ close $f
+ set f [open "|[list $tcltest script]" r]
+ gets $f x
+ if {[catch {socket [info hostname] 2828} sock]} {
+ set x $sock
+ } else {
+ puts $sock hello
+ flush $sock
+ lappend x [gets $f]
+ close $sock
+ }
+ close $f
+ set x
+} {ready hello}
+test socket-2.5 {tcp connection with redundant server port} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ set timer [after 2000 "set x done"]
+ set f [socket -server accept 2828]
+ proc accept {file addr port} {
+ global x
+ puts "[gets $file]"
+ close $file
+ set x done
+ }
+ puts ready
+ vwait x
+ after cancel $timer
+ close $f
+ }
+ close $f
+ set f [open "|[list $tcltest script]" r]
+ gets $f x
+ if {[catch {socket localhost 2828} sock]} {
+ set x $sock
+ } else {
+ puts $sock hello
+ flush $sock
+ lappend x [gets $f]
+ close $sock
+ }
+ close $f
+ set x
+} {ready hello}
+test socket-2.6 {tcp connection} {} {
+ set status ok
+ if {![catch {set sock [socket localhost 2828]}]} {
+ if {![catch {gets $sock}]} {
+ set status broken
+ }
+ close $sock
+ }
+ set status
+} ok
+test socket-2.7 {echo server, one line} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ set timer [after 2000 "set x done"]
+ set f [socket -server accept 2828]
+ proc accept {s a p} {
+ fileevent $s readable [list echo $s]
+ fconfigure $s -translation lf -buffering line
+ }
+ proc echo {s} {
+ set l [gets $s]
+ if {[eof $s]} {
+ global x
+ close $s
+ set x done
+ } else {
+ puts $s $l
+ }
+ }
+ puts ready
+ vwait x
+ after cancel $timer
+ close $f
+ puts done
+ }
+ close $f
+ set f [open "|[list $tcltest script]" r]
+ gets $f
+ set s [socket localhost 2828]
+ fconfigure $s -buffering line -translation lf
+ puts $s "hello abcdefghijklmnop"
+ set x [gets $s]
+ close $s
+ set y [gets $f]
+ close $f
+ list $x $y
+} {{hello abcdefghijklmnop} done}
+test socket-2.8 {echo server, loop 50 times, single connection} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ set f [socket -server accept 2828]
+ proc accept {s a p} {
+ fileevent $s readable [list echo $s]
+ fconfigure $s -buffering line
+ }
+ proc echo {s} {
+ global i
+ set l [gets $s]
+ if {[eof $s]} {
+ global x
+ close $s
+ set x done
+ } else {
+ incr i
+ puts $s $l
+ }
+ }
+ set i 0
+ puts ready
+ set timer [after 20000 "set x done"]
+ vwait x
+ after cancel $timer
+ close $f
+ puts "done $i"
+ }
+ close $f
+ set f [open "|[list $tcltest script]" r]
+ gets $f
+ set s [socket localhost 2828]
+ fconfigure $s -buffering line
+ for {set x 0} {$x < 50} {incr x} {
+ puts $s "hello abcdefghijklmnop"
+ gets $s
+ }
+ close $s
+ set x [gets $f]
+ close $f
+ set x
+} {done 50}
+test socket-2.9 {socket conflict} {stdio} {
+ set s [socket -server accept 2828]
+ removeFile script
+ set f [open script w]
+ puts $f {set f [socket -server accept 2828]}
+ close $f
+ set f [open "|[list $tcltest script]" r]
+ gets $f
+ after 100
+ set x [list [catch {close $f} msg] $msg]
+ close $s
+ set x
+} {1 {couldn't open socket: address already in use
+ while executing
+"socket -server accept 2828"
+ (file "script" line 1)}}
+test socket-2.10 {close on accept, accepted socket lives} {
+ set done 0
+ set timer [after 20000 "set done timed_out"]
+ set ss [socket -server accept 2830]
+ proc accept {s a p} {
+ global ss
+ close $ss
+ fileevent $s readable "readit $s"
+ fconfigure $s -trans lf
+ }
+ proc readit {s} {
+ global done
+ gets $s
+ close $s
+ set done 1
+ }
+ set cs [socket [info hostname] 2830]
+ puts $cs hello
+ close $cs
+ vwait done
+ after cancel $timer
+ set done
+} 1
+
+test socket-3.1 {socket conflict} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ set f [socket -server accept 2828]
+ puts ready
+ gets stdin
+ close $f
+ }
+ close $f
+ set f [open "|[list $tcltest script]" r+]
+ gets $f
+ set x [list [catch {socket -server accept 2828} msg] \
+ $msg]
+ puts $f bye
+ close $f
+ set x
+} {1 {couldn't open socket: address already in use}}
+test socket-3.2 {server with several clients} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ set t1 [after 30000 "set x timed_out"]
+ set t2 [after 31000 "set x timed_out"]
+ set t3 [after 32000 "set x timed_out"]
+ set counter 0
+ set s [socket -server accept 2828]
+ proc accept {s a p} {
+ fileevent $s readable [list echo $s]
+ fconfigure $s -buffering line
+ }
+ proc echo {s} {
+ global x
+ set l [gets $s]
+ if {[eof $s]} {
+ close $s
+ set x done
+ } else {
+ puts $s $l
+ }
+ }
+ puts ready
+ vwait x
+ after cancel $t1
+ vwait x
+ after cancel $t2
+ vwait x
+ after cancel $t3
+ close $s
+ puts $x
+ }
+ close $f
+ set f [open "|[list $tcltest script]" r+]
+ set x [gets $f]
+ set s1 [socket localhost 2828]
+ fconfigure $s1 -buffering line
+ set s2 [socket localhost 2828]
+ fconfigure $s2 -buffering line
+ set s3 [socket localhost 2828]
+ fconfigure $s3 -buffering line
+ for {set i 0} {$i < 100} {incr i} {
+ puts $s1 hello,s1
+ gets $s1
+ puts $s2 hello,s2
+ gets $s2
+ puts $s3 hello,s3
+ gets $s3
+ }
+ close $s1
+ close $s2
+ close $s3
+ lappend x [gets $f]
+ close $f
+ set x
+} {ready done}
+
+test socket-4.1 {server with several clients} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ gets stdin
+ set s [socket localhost 2828]
+ fconfigure $s -buffering line
+ for {set i 0} {$i < 100} {incr i} {
+ puts $s hello
+ gets $s
+ }
+ close $s
+ puts bye
+ gets stdin
+ }
+ close $f
+ set p1 [open "|[list $tcltest script]" r+]
+ fconfigure $p1 -buffering line
+ set p2 [open "|[list $tcltest script]" r+]
+ fconfigure $p2 -buffering line
+ set p3 [open "|[list $tcltest script]" r+]
+ fconfigure $p3 -buffering line
+ proc accept {s a p} {
+ fconfigure $s -buffering line
+ fileevent $s readable [list echo $s]
+ }
+ proc echo {s} {
+ global x
+ set l [gets $s]
+ if {[eof $s]} {
+ close $s
+ set x done
+ } else {
+ puts $s $l
+ }
+ }
+ set t1 [after 30000 "set x timed_out"]
+ set t2 [after 31000 "set x timed_out"]
+ set t3 [after 32000 "set x timed_out"]
+ set s [socket -server accept 2828]
+ puts $p1 open
+ puts $p2 open
+ puts $p3 open
+ vwait x
+ vwait x
+ vwait x
+ after cancel $t1
+ after cancel $t2
+ after cancel $t3
+ close $s
+ set l ""
+ lappend l [list p1 [gets $p1] $x]
+ lappend l [list p2 [gets $p2] $x]
+ lappend l [list p3 [gets $p3] $x]
+ puts $p1 bye
+ puts $p2 bye
+ puts $p3 bye
+ close $p1
+ close $p2
+ close $p3
+ set l
+} {{p1 bye done} {p2 bye done} {p3 bye done}}
+test socket-4.2 {byte order problems, socket numbers, htons} {
+ set x ok
+ if {[catch {socket -server dodo 0x3000} msg]} {
+ set x $msg
+ } else {
+ close $msg
+ }
+ set x
+} ok
+
+test socket-5.1 {byte order problems, socket numbers, htons} {unixOnly} {
+ #
+ # THIS TEST WILL FAIL if you are running as superuser.
+ #
+ set x {couldn't open socket: not owner}
+ if {![catch {socket -server dodo 0x1} msg]} {
+ set x {htons problem, should be disallowed, are you running as SU?}
+ close $msg
+ }
+ set x
+} {couldn't open socket: not owner}
+test socket-5.2 {byte order problems, socket numbers, htons} {
+ set x {couldn't open socket: port number too high}
+ if {![catch {socket -server dodo 0x10000} msg]} {
+ set x {port resolution problem, should be disallowed}
+ close $msg
+ }
+ set x
+} {couldn't open socket: port number too high}
+test socket-5.3 {byte order problems, socket numbers, htons} {unixOnly} {
+ #
+ # THIS TEST WILL FAIL if you are running as superuser.
+ #
+ set x {couldn't open socket: not owner}
+ if {![catch {socket -server dodo 21} msg]} {
+ set x {htons problem, should be disallowed, are you running as SU?}
+ close $msg
+ }
+ set x
+} {couldn't open socket: not owner}
+
+test socket-6.1 {accept callback error} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ gets stdin
+ socket localhost 2848
+ }
+ close $f
+ set f [open "|[list $tcltest script]" r+]
+ proc bgerror args {
+ global x
+ set x $args
+ }
+ proc accept {s a p} {expr 10 / 0}
+ set s [socket -server accept 2848]
+ puts $f hello
+ close $f
+ set timer [after 10000 "set x timed_out"]
+ vwait x
+ after cancel $timer
+ close $s
+ rename bgerror {}
+ set x
+} {{divide by zero}}
+
+test socket-7.1 {testing socket specific options} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ socket -server accept 2820
+ proc accept args {
+ global x
+ set x done
+ }
+ puts ready
+ set timer [after 10000 "set x timed_out"]
+ vwait x
+ after cancel $timer
+ }
+ close $f
+ set f [open "|[list $tcltest script]" r]
+ gets $f
+ set s [socket localhost 2820]
+ set p [fconfigure $s -peername]
+ close $s
+ close $f
+ set l ""
+ lappend l [string compare [lindex $p 0] 127.0.0.1]
+ lappend l [string compare [lindex $p 2] 2820]
+ lappend l [llength $p]
+} {0 0 3}
+test socket-7.2 {testing socket specific options} {stdio} {
+ removeFile script
+ set f [open script w]
+ puts $f {
+ socket -server accept 2821
+ proc accept args {
+ global x
+ set x done
+ }
+ puts ready
+ set timer [after 10000 "set x timed_out"]
+ vwait x
+ after cancel $timer
+ }
+ close $f
+ set f [open "|[list $tcltest script]" r]
+ gets $f
+ set s [socket localhost 2821]
+ set p [fconfigure $s -sockname]
+ close $s
+ close $f
+ set l ""
+ lappend l [llength $p]
+ lappend l [lindex $p 0]
+ lappend l [expr [lindex $p 2] == 2821]
+} {3 127.0.0.1 0}
+test socket-7.3 {testing socket specific options} {
+ set s [socket -server accept 2822]
+ set l [fconfigure $s]
+ close $s
+ update
+ llength $l
+} 10
+test socket-7.4 {testing socket specific options} {
+ set s [socket -server accept 2823]
+ proc accept {s a p} {
+ global x
+ set x [fconfigure $s -sockname]
+ close $s
+ }
+ set s1 [socket [info hostname] 2823]
+ set timer [after 10000 "set x timed_out"]
+ vwait x
+ after cancel $timer
+ close $s
+ close $s1
+ set l ""
+ lappend l [lindex $x 2] [llength $x]
+} {2823 3}
+test socket-7.5 {testing socket specific options} {unixOrPc} {
+ set s [socket -server accept 2829]
+ proc accept {s a p} {
+ global x
+ set x [fconfigure $s -sockname]
+ close $s
+ }
+ set s1 [socket localhost 2829]
+ set timer [after 10000 "set x timed_out"]
+ vwait x
+ after cancel $timer
+ close $s
+ close $s1
+ set l ""
+ lappend l [lindex $x 0] [lindex $x 2] [llength $x]
+} {127.0.0.1 2829 3}
+
+test socket-8.1 {testing -async flag on sockets} {
+ # NOTE: This test may fail on some Solaris 2.4 systems. If it does,
+ # check that you have these patches installed (using showrev -p):
+ #
+ # 101907-05, 101925-02, 101945-14, 101959-03, 101969-05, 101973-03,
+ # 101977-03, 101981-02, 101985-01, 102001-03, 102003-01, 102007-01,
+ # 102011-02, 102024-01, 102039-01, 102044-01, 102048-01, 102062-03,
+ # 102066-04, 102070-01, 102105-01, 102153-03, 102216-01, 102232-01,
+ # 101878-03, 101879-01, 101880-03, 101933-01, 101950-01, 102030-01,
+ # 102057-08, 102140-01, 101920-02, 101921-09, 101922-07, 101923-03
+ #
+ # If after installing these patches you are still experiencing a
+ # problem, please email jyl@eng.sun.com. We have not observed this
+ # failure on Solaris 2.5, so another option (instead of installing
+ # these patches) is to upgrade to Solaris 2.5.
+ set s [socket -server accept 2830]
+ proc accept {s a p} {
+ global x
+ puts $s bye
+ close $s
+ set x done
+ }
+ set s1 [socket -async [info hostname] 2830]
+ vwait x
+ set z [gets $s1]
+ close $s
+ close $s1
+ set z
+} bye
+
+test socket-9.1 {testing spurious events} {
+ set len 0
+ set spurious 0
+ set done 0
+ proc readlittle {s} {
+ global spurious done len
+ set l [read $s 1]
+ if {[string length $l] == 0} {
+ if {![eof $s]} {
+ incr spurious
+ } else {
+ close $s
+ set done 1
+ }
+ } else {
+ incr len [string length $l]
+ }
+ }
+ proc accept {s a p} {
+ fconfigure $s -buffering none -blocking off
+ fileevent $s readable [list readlittle $s]
+ }
+ set s [socket -server accept 2831]
+ set c [socket [info hostname] 2831]
+ puts -nonewline $c 01234567890123456789012345678901234567890123456789
+ close $c
+ set timer [after 10000 "set done timed_out"]
+ vwait done
+ after cancel $timer
+ close $s
+ list $spurious $len
+} {0 50}
+test socket-9.2 {testing async write, fileevents, flush on close} {} {
+ set firstblock ""
+ for {set i 0} {$i < 5} {incr i} {set firstblock "a$firstblock$firstblock"}
+ set secondblock ""
+ for {set i 0} {$i < 16} {incr i} {
+ set secondblock "b$secondblock$secondblock"
+ }
+ set l [socket -server accept 2832]
+ proc accept {s a p} {
+ fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
+ -buffering line
+ fileevent $s readable "readable $s"
+ }
+ proc readable {s} {
+ set l [gets $s]
+ fileevent $s readable {}
+ after 1000 respond $s
+ }
+ proc respond {s} {
+ global firstblock
+ puts -nonewline $s $firstblock
+ after 1000 writedata $s
+ }
+ proc writedata {s} {
+ global secondblock
+ puts -nonewline $s $secondblock
+ close $s
+ }
+ set s [socket [info hostname] 2832]
+ fconfigure $s -blocking 0 -trans lf -buffering line
+ set count 0
+ puts $s hello
+ proc readit {s} {
+ global count done
+ set l [read $s]
+ incr count [string length $l]
+ if {[eof $s]} {
+ close $s
+ set done 1
+ }
+ }
+ fileevent $s readable "readit $s"
+ set timer [after 10000 "set done timed_out"]
+ vwait done
+ after cancel $timer
+ close $l
+ set count
+} 65566
+test socket-9.3 {testing EOF stickyness} {
+ proc count_to_eof {s} {
+ global count done timer
+ set l [gets $s]
+ if {[eof $s]} {
+ incr count
+ if {$count > 9} {
+ close $s
+ set done true
+ set count {eof is sticky}
+ after cancel $timer
+ }
+ }
+ }
+ proc timerproc {} {
+ global done count c
+ set done true
+ set count {timer went off, eof is not sticky}
+ close $c
+ }
+ set count 0
+ set done false
+ proc write_then_close {s} {
+ puts $s bye
+ close $s
+ }
+ proc accept {s a p} {
+ fconfigure $s -buffering line -translation lf
+ fileevent $s writable "write_then_close $s"
+ }
+ set s [socket -server accept 2833]
+ set c [socket [info hostname] 2833]
+ fconfigure $c -blocking off -buffering line -translation lf
+ fileevent $c readable "count_to_eof $c"
+ set timer [after 1000 timerproc]
+ vwait done
+ close $s
+ set count
+} {eof is sticky}
+
+removeFile script
+
+#
+# The rest of the tests are run only if we are doing testing against
+# a remote server.
+#
+
+if {$doTestsWithRemoteServer == 0} {
+ return
+}
+
+test socket-10.1 {tcp connection} {
+ sendCommand {
+ set socket9_1_test_server [socket -server accept 2834]
+ proc accept {s a p} {
+ puts $s done
+ close $s
+ }
+ }
+ set s [socket $remoteServerIP 2834]
+ set r [gets $s]
+ close $s
+ sendCommand {close $socket9_1_test_server}
+ set r
+} done
+test socket-10.2 {client specifies its port} {
+ if {[info exists port]} {
+ incr port
+ } else {
+ set port [expr 2048 + [pid]%1024]
+ }
+ sendCommand {
+ set socket9_2_test_server [socket -server accept 2835]
+ proc accept {s a p} {
+ puts $s $p
+ close $s
+ }
+ }
+ set s [socket -myport $port $remoteServerIP 2835]
+ set r [gets $s]
+ close $s
+ sendCommand {close $socket9_2_test_server}
+ if {$r == $port} {
+ set result ok
+ } else {
+ set result broken
+ }
+ set result
+} ok
+#
+# Tests io-10.3, io-10.4 have been removed.
+#
+test socket-10.3 {trying to connect, no server} {
+ set status ok
+ if {![catch {set s [socket $remoteServerIp 2836]}]} {
+ if {![catch {gets $s}]} {
+ set status broken
+ }
+ close $s
+ }
+ set status
+} ok
+test socket-10.4 {remote echo, one line} {
+ sendCommand {
+ set socket10_6_test_server [socket -server accept 2836]
+ proc accept {s a p} {
+ fileevent $s readable [list echo $s]
+ fconfigure $s -buffering line -translation crlf
+ }
+ proc echo {s} {
+ set l [gets $s]
+ if {[eof $s]} {
+ close $s
+ } else {
+ puts $s $l
+ }
+ }
+ }
+ set f [socket $remoteServerIP 2836]
+ fconfigure $f -translation crlf -buffering line
+ puts $f hello
+ set r [gets $f]
+ close $f
+ sendCommand {close $socket10_6_test_server}
+ set r
+} hello
+test socket-10.5 {remote echo, 50 lines} {
+ sendCommand {
+ set socket10_7_test_server [socket -server accept 2836]
+ proc accept {s a p} {
+ fileevent $s readable [list echo $s]
+ fconfigure $s -buffering line -translation crlf
+ }
+ proc echo {s} {
+ set l [gets $s]
+ if {[eof $s]} {
+ close $s
+ } else {
+ puts $s $l
+ }
+ }
+ }
+ set f [socket $remoteServerIP 2836]
+ fconfigure $f -translation crlf -buffering line
+ for {set cnt 0} {$cnt < 50} {incr cnt} {
+ puts $f "hello, $cnt"
+ if {[string compare [gets $f] "hello, $cnt"] != 0} {
+ break
+ }
+ }
+ close $f
+ sendCommand {close $socket10_7_test_server}
+ set cnt
+} 50
+# Macintosh sockets can have more than one server per port
+if {$tcl_platform(platform) == "macintosh"} {
+ set conflictResult {0 2836}
+} else {
+ set conflictResult {1 {couldn't open socket: address already in use}}
+}
+test socket-10.6 {socket conflict} {
+ set s1 [socket -server accept 2836]
+ if {[catch {set s2 [socket -server accept 2836]} msg]} {
+ set result [list 1 $msg]
+ } else {
+ set result [list 0 [lindex [fconfigure $s2 -sockname] 2]]
+ close $s2
+ }
+ close $s1
+ set result
+} $conflictResult
+test socket-10.7 {server with several clients} {
+ sendCommand {
+ set socket10_9_test_server [socket -server accept 2836]
+ proc accept {s a p} {
+ fconfigure $s -buffering line
+ fileevent $s readable [list echo $s]
+ }
+ proc echo {s} {
+ set l [gets $s]
+ if {[eof $s]} {
+ close $s
+ } else {
+ puts $s $l
+ }
+ }
+ }
+ set s1 [socket $remoteServerIP 2836]
+ fconfigure $s1 -buffering line
+ set s2 [socket $remoteServerIP 2836]
+ fconfigure $s2 -buffering line
+ set s3 [socket $remoteServerIP 2836]
+ fconfigure $s3 -buffering line
+ for {set i 0} {$i < 100} {incr i} {
+ puts $s1 hello,s1
+ gets $s1
+ puts $s2 hello,s2
+ gets $s2
+ puts $s3 hello,s3
+ gets $s3
+ }
+ close $s1
+ close $s2
+ close $s3
+ sendCommand {close $socket10_9_test_server}
+ set i
+} 100
+test socket-10.8 {client with several servers} {
+ sendCommand {
+ set s1 [socket -server "accept 4003" 4003]
+ set s2 [socket -server "accept 4004" 4004]
+ set s3 [socket -server "accept 4005" 4005]
+ proc accept {mp s a p} {
+ puts $s $mp
+ close $s
+ }
+ }
+ set s1 [socket $remoteServerIP 4003]
+ set s2 [socket $remoteServerIP 4004]
+ set s3 [socket $remoteServerIP 4005]
+ set l ""
+ lappend l [gets $s1] [gets $s1] [eof $s1] [gets $s2] [gets $s2] [eof $s2] \
+ [gets $s3] [gets $s3] [eof $s3]
+ close $s1
+ close $s2
+ close $s3
+ sendCommand {
+ close $s1
+ close $s2
+ close $s3
+ }
+ set l
+} {4003 {} 1 4004 {} 1 4005 {} 1}
+test socket-10.9 {accept callback error} {
+ set s [socket -server accept 2836]
+ proc accept {s a p} {expr 10 / 0}
+ proc bgerror args {
+ global x
+ set x $args
+ }
+ if {[catch {sendCommand {
+ set peername [fconfigure $callerSocket -peername]
+ set s [socket [lindex $peername 0] 2836]
+ close $s
+ }} msg]} {
+ close $s
+ error $msg
+ }
+ set timer [after 10000 "set x timed_out"]
+ vwait x
+ after cancel $timer
+ close $s
+ rename bgerror {}
+ set x
+} {{divide by zero}}
+test socket-10.10 {testing socket specific options} {
+ sendCommand {
+ set socket10_12_test_server [socket -server accept 2836]
+ proc accept {s a p} {close $s}
+ }
+ set s [socket $remoteServerIP 2836]
+ set p [fconfigure $s -peername]
+ set n [fconfigure $s -sockname]
+ set l ""
+ lappend l [lindex $p 2] [llength $p] [llength $p]
+ close $s
+ sendCommand {close $socket10_12_test_server}
+ set l
+} {2836 3 3}
+test socket-10.11 {testing spurious events} {
+ sendCommand {
+ set socket10_13_test_server [socket -server accept 2836]
+ proc accept {s a p} {
+ fconfigure $s -translation "auto lf"
+ after 100 writesome $s
+ }
+ proc writesome {s} {
+ for {set i 0} {$i < 100} {incr i} {
+ puts $s "line $i from remote server"
+ }
+ close $s
+ }
+ }
+ set len 0
+ set spurious 0
+ set done 0
+ proc readlittle {s} {
+ global spurious done len
+ set l [read $s 1]
+ if {[string length $l] == 0} {
+ if {![eof $s]} {
+ incr spurious
+ } else {
+ close $s
+ set done 1
+ }
+ } else {
+ incr len [string length $l]
+ }
+ }
+ set c [socket $remoteServerIP 2836]
+ fileevent $c readable "readlittle $c"
+ set timer [after 10000 "set done timed_out"]
+ vwait done
+ after cancel $timer
+ sendCommand {close $socket10_13_test_server}
+ list $spurious $len
+} {0 2690}
+test socket-10.12 {testing EOF stickyness} {
+ set counter 0
+ set done 0
+ proc count_up {s} {
+ global counter done after_id
+ set l [gets $s]
+ if {[eof $s]} {
+ incr counter
+ if {$counter > 9} {
+ set done {EOF is sticky}
+ after cancel $after_id
+ close $s
+ }
+ }
+ }
+ proc timed_out {} {
+ global c done
+ set done {timed_out, EOF is not sticky}
+ close $c
+ }
+ sendCommand {
+ set socket10_14_test_server [socket -server accept 2836]
+ proc accept {s a p} {
+ after 100 close $s
+ }
+ }
+ set c [socket $remoteServerIP 2836]
+ fileevent $c readable "count_up $c"
+ set after_id [after 1000 timed_out]
+ vwait done
+ sendCommand {close $socket10_14_test_server}
+ set done
+} {EOF is sticky}
+test socket-10.13 {testing async write, async flush, async close} {
+ proc readit {s} {
+ global count done
+ set l [read $s]
+ incr count [string length $l]
+ if {[eof $s]} {
+ close $s
+ set done 1
+ }
+ }
+ sendCommand {
+ set firstblock ""
+ for {set i 0} {$i < 5} {incr i} {
+ set firstblock "a$firstblock$firstblock"
+ }
+ set secondblock ""
+ for {set i 0} {$i < 16} {incr i} {
+ set secondblock "b$secondblock$secondblock"
+ }
+ set l [socket -server accept 2845]
+ proc accept {s a p} {
+ fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
+ -buffering line
+ fileevent $s readable "readable $s"
+ }
+ proc readable {s} {
+ set l [gets $s]
+ fileevent $s readable {}
+ after 1000 respond $s
+ }
+ proc respond {s} {
+ global firstblock
+ puts -nonewline $s $firstblock
+ after 1000 writedata $s
+ }
+ proc writedata {s} {
+ global secondblock
+ puts -nonewline $s $secondblock
+ close $s
+ }
+ }
+ set s [socket $remoteServerIP 2845]
+ fconfigure $s -blocking 0 -trans lf -buffering line
+ set count 0
+ puts $s hello
+ fileevent $s readable "readit $s"
+ set timer [after 10000 "set done timed_out"]
+ vwait done
+ after cancel $timer
+ sendCommand {close $l}
+ set count
+} 65566
+
+if {[string match sock* $commandSocket] == 1} {
+ puts $commandSocket exit
+ flush $commandSocket
+}
+catch {close $commandSocket}
+catch {close $remoteProcChan}
+
+set x ""
+unset x
generated by cgit v0.12 at 2024-07-15 18:16:02 (GMT)