diff options
Diffstat (limited to 'unix/Makefile.in')
| -rw-r--r-- | unix/Makefile.in | 347 |
1 files changed, 167 insertions, 180 deletions
diff --git a/unix/Makefile.in b/unix/Makefile.in index 1cbb050..e7b2207 100644 --- a/unix/Makefile.in +++ b/unix/Makefile.in @@ -1,30 +1,28 @@ # -# This file is a Makefile for Tcl. If it has the name "Makefile.in" -# then it is a template for a Makefile; to generate the actual Makefile, -# run "./configure", which is a configuration script generated by the -# "autoconf" program (constructs like "@foo@" will get replaced in the -# actual Makefile. +# This file is a Makefile for Tcl. If it has the name "Makefile.in" then it is +# a template for a Makefile; to generate the actual Makefile, run +# "./configure", which is a configuration script generated by the "autoconf" +# program (constructs like "@foo@" will get replaced in the actual Makefile. # -# RCS: @(#) $Id: Makefile.in,v 1.197 2006/11/09 16:52:30 dgp Exp $ +# RCS: @(#) $Id: Makefile.in,v 1.198 2006/11/25 17:18:10 dkf Exp $ VERSION = @TCL_VERSION@ MAJOR_VERSION = @TCL_MAJOR_VERSION@ MINOR_VERSION = @TCL_MINOR_VERSION@ PATCH_LEVEL = @TCL_PATCH_LEVEL@ -#---------------------------------------------------------------- -# Things you can change to personalize the Makefile for your own -# site (you can make these changes in either Makefile.in or -# Makefile, but changes to Makefile will get lost if you re-run -# the configuration script). -#---------------------------------------------------------------- +#-------------------------------------------------------------------------- +# Things you can change to personalize the Makefile for your own site (you can +# make these changes in either Makefile.in or Makefile, but changes to +# Makefile will get lost if you re-run the configuration script). +#-------------------------------------------------------------------------- -# Default top-level directories in which to install architecture- -# specific files (exec_prefix) and machine-independent files such -# as scripts (prefix). The values specified here may be overridden -# at configure-time with the --exec-prefix and --prefix options -# to the "configure" script. The *dir vars are standard configure -# substitutions that are based off prefix and exec_prefix. +# Default top-level directories in which to install architecture-specific +# files (exec_prefix) and machine-independent files such as scripts (prefix). +# The values specified here may be overridden at configure-time with the +# --exec-prefix and --prefix options to the "configure" script. The *dir vars +# are standard configure substitutions that are based off prefix and +# exec_prefix. prefix = @prefix@ exec_prefix = @exec_prefix@ @@ -33,11 +31,10 @@ libdir = @libdir@ includedir = @includedir@ mandir = @mandir@ -# The following definition can be set to non-null for special systems -# like AFS with replication. It allows the pathnames used for installation -# to be different than those used for actually reference files at -# run-time. INSTALL_ROOT is prepended to $prefix and $exec_prefix -# when installing files. +# The following definition can be set to non-null for special systems like AFS +# with replication. It allows the pathnames used for installation to be +# different than those used for actually reference files at run-time. +# INSTALL_ROOT is prepended to $prefix and $exec_prefix when installing files. INSTALL_ROOT = $(DESTDIR) # Path for the platform independent Tcl scripting libraries: @@ -70,12 +67,10 @@ MAN_INSTALL_DIR = $(INSTALL_ROOT)$(mandir) # Directory in which to install manual entry for tclsh: MAN1_INSTALL_DIR = $(MAN_INSTALL_DIR)/man1 -# Directory in which to install manual entries for Tcl's C library -# procedures: +# Directory in which to install manual entries for Tcl's C library procedures: MAN3_INSTALL_DIR = $(MAN_INSTALL_DIR)/man3 -# Directory in which to install manual entries for the built-in -# Tcl commands: +# Directory in which to install manual entries for the built-in Tcl commands: MANN_INSTALL_DIR = $(MAN_INSTALL_DIR)/mann # Path to the html documentation dir: @@ -109,39 +104,37 @@ LDFLAGS_DEBUG = @LDFLAGS_DEBUG@ LDFLAGS_OPTIMIZE = @LDFLAGS_OPTIMIZE@ LDFLAGS = @LDFLAGS_DEFAULT@ @LDFLAGS@ -# To disable ANSI-C procedure prototypes reverse the comment characters -# on the following lines: +# To disable ANSI-C procedure prototypes reverse the comment characters on the +# following lines: PROTO_FLAGS = #PROTO_FLAGS = -DNO_PROTOTYPE -# If you use the setenv, putenv, or unsetenv procedures to modify -# environment variables in your application and you'd like those -# modifications to appear in the "env" Tcl variable, switch the -# comments on the two lines below so that Tcl provides these -# procedures instead of your standard C library. +# If you use the setenv, putenv, or unsetenv procedures to modify environment +# variables in your application and you'd like those modifications to appear +# in the "env" Tcl variable, switch the comments on the two lines below so +# that Tcl provides these procedures instead of your standard C library. ENV_FLAGS = #ENV_FLAGS = -DTclSetEnv=setenv -DTcl_PutEnv=putenv -DTclUnsetEnv=unsetenv -# To compile for non-UNIX systems (so that only the non-UNIX-specific -# commands are available), reverse the comment characters on the -# following pairs of lines. In addition, you'll have to provide your -# own replacement for the "panic" procedure (see panic.c for what -# the current one does). +# To compile for non-UNIX systems (so that only the non-UNIX-specific commands +# are available), reverse the comment characters on the following pairs of +# lines. In addition, you'll have to provide your own replacement for the +# "panic" procedure (see panic.c for what the current one does). GENERIC_FLAGS = #GENERIC_FLAGS = -DTCL_GENERIC_ONLY UNIX_OBJS = tclUnixChan.o tclUnixEvent.o tclUnixFCmd.o \ tclUnixFile.o tclUnixPipe.o tclUnixSock.o \ tclUnixTime.o tclUnixInit.o tclUnixThrd.o \ - tclUnixCompat.o + tclUnixCompat.o #UNIX_OBJS = NOTIFY_OBJS = tclUnixNotfy.o #NOTIFY_OBJS = # To enable memory debugging, call configure with --enable-symbols=mem -# Warning: if you enable memory debugging, you must do it *everywhere*, -# including all the code that calls Tcl, and you must use ckalloc and -# ckfree everywhere instead of malloc and free. +# Warning: if you enable memory debugging, you must do it *everywhere*, +# including all the code that calls Tcl, and you must use ckalloc and ckfree +# everywhere instead of malloc and free. TCL_STUB_LIB_FILE = @TCL_STUB_LIB_FILE@ #TCL_STUB_LIB_FILE = libtclstub.a @@ -152,19 +145,19 @@ STUB_LIB_FILE = ${TCL_STUB_LIB_FILE} TCL_STUB_LIB_FLAG = @TCL_STUB_LIB_FLAG@ #TCL_STUB_LIB_FLAG = -ltclstub -# To compile without backward compatibility and deprecated code -# uncomment the following +# To compile without backward compatibility and deprecated code uncomment the +# following NO_DEPRECATED_FLAGS = #NO_DEPRECATED_FLAGS = -DTCL_NO_DEPRECATED -# Some versions of make, like SGI's, use the following variable to -# determine which shell to use for executing commands: +# Some versions of make, like SGI's, use the following variable to determine +# which shell to use for executing commands: SHELL = /bin/sh -# Tcl used to let the configure script choose which program to use -# for installing, but there are just too many different versions of -# "install" around; better to use the install-sh script that comes -# with the distribution, which is slower but guaranteed to work. +# Tcl used to let the configure script choose which program to use for +# installing, but there are just too many different versions of "install" +# around; better to use the install-sh script that comes with the +# distribution, which is slower but guaranteed to work. INSTALL_STRIP_PROGRAM = -s INSTALL_STRIP_LIBRARY = -S -S @@ -174,18 +167,16 @@ INSTALL_PROGRAM = ${INSTALL} INSTALL_LIBRARY = ${INSTALL} INSTALL_DATA = ${INSTALL} -m 644 -# TCL_EXE is the name of a tclsh executable that is available *BEFORE* -# running make for the first time. Certain build targets (make genstubs) -# need it to be available on the PATH. This executable should *NOT* be -# required just to do a normal build although it can be required to run -# make dist. +# TCL_EXE is the name of a tclsh executable that is available *BEFORE* running +# make for the first time. Certain build targets (make genstubs) need it to be +# available on the PATH. This executable should *NOT* be required just to do a +# normal build although it can be required to run make dist. TCL_EXE = tclsh -# The symbols below provide support for dynamic loading and shared -# libraries. See configure.in for a description of what the -# symbols mean. The values of the symbols are normally set by the -# configure script. You shouldn't normally need to modify any of -# these definitions by hand. +# The symbols below provide support for dynamic loading and shared libraries. +# See configure.in for a description of what the symbols mean. The values of +# the symbols are normally set by the configure script. You shouldn't normally +# need to modify any of these definitions by hand. STLIB_LD = @STLIB_LD@ SHLIB_LD = @SHLIB_LD@ @@ -198,17 +189,17 @@ SHLIB_SUFFIX = @SHLIB_SUFFIX@ DLTEST_TARGETS = dltest.marker -# Additional search flags needed to find the various shared libraries -# at run-time. The first symbol is for use when creating a binary -# with cc, and the second is for use when running ld directly. +# Additional search flags needed to find the various shared libraries at +# run-time. The first symbol is for use when creating a binary with cc, and +# the second is for use when running ld directly. CC_SEARCH_FLAGS = @CC_SEARCH_FLAGS@ LD_SEARCH_FLAGS = @LD_SEARCH_FLAGS@ -# The following symbol is defined to "$(DLTEST_TARGETS)" if dynamic -# loading is available; this causes everything in the "dltest" -# subdirectory to be built when making "tcltest. If dynamic loading -# isn't available, configure defines this symbol to an empty string, -# in which case the shared libraries aren't built. +# The following symbol is defined to "$(DLTEST_TARGETS)" if dynamic loading is +# available; this causes everything in the "dltest" subdirectory to be built +# when making "tcltest. If dynamic loading isn't available, configure defines +# this symbol to an empty string, in which case the shared libraries aren't +# built. BUILD_DLTEST = @BUILD_DLTEST@ #BUILD_DLTEST = @@ -227,11 +218,11 @@ TCL_BUILD_EXP_FILE = @TCL_BUILD_EXP_FILE@ # support for embedded libraries on Darwin / Mac OS X DYLIB_INSTALL_DIR = ${LIB_RUNTIME_DIR} -#---------------------------------------------------------------- -# The information below is modified by the configure script when -# Makefile is generated from Makefile.in. You shouldn't normally -# modify any of this stuff by hand. -#---------------------------------------------------------------- +#-------------------------------------------------------------------------- +# The information below is modified by the configure script when Makefile is +# generated from Makefile.in. You shouldn't normally modify any of this stuff +# by hand. +#-------------------------------------------------------------------------- COMPAT_OBJS = @LIBOBJS@ @@ -255,28 +246,27 @@ TCL_BUILDTIME_LIBRARY = @TCL_SRC_DIR@/library CC = @CC@ #CC = purify -best-effort @CC@ -DPURIFY -# Flags to be passed to installManPage to control how the manpages -# should be installed (symlinks, compression, package name suffix). +# Flags to be passed to installManPage to control how the manpages should be +# installed (symlinks, compression, package name suffix). MAN_FLAGS = @MAN_FLAGS@ # If non-empty, install the timezone files that are included with Tcl, # otherwise use the ones that ship with the OS. INSTALL_TZDATA = @INSTALL_TZDATA@ -#---------------------------------------------------------------- -# The information below is usually usable as is. The configure -# script won't modify it and it only exists to make working -# around selected rare system configurations easier. -#---------------------------------------------------------------- +#-------------------------------------------------------------------------- +# The information below is usually usable as is. The configure script won't +# modify it and it only exists to make working around selected rare system +# configurations easier. +#-------------------------------------------------------------------------- GDB = gdb DDD = ddd -#---------------------------------------------------------------- -# The information below should be usable as is. The configure -# script won't modify it and you shouldn't need to modify it -# either. -#---------------------------------------------------------------- +#-------------------------------------------------------------------------- +# The information below should be usable as is. The configure script won't +# modify it and you shouldn't need to modify it either. +#-------------------------------------------------------------------------- CC_SWITCHES = ${CFLAGS} ${CFLAGS_WARNING} ${SHLIB_CFLAGS} \ @@ -300,7 +290,7 @@ TCLTEST_OBJS = tclTestInit.o tclTest.o tclTestObj.o tclTestProcBodyObj.o \ tclThreadTest.o tclUnixTest.o XTTEST_OBJS = xtTestInit.o tclTest.o tclTestObj.o tclTestProcBodyObj.o \ - tclThreadTest.o tclUnixTest.o tclXtNotify.o tclXtTest.o + tclThreadTest.o tclUnixTest.o tclXtNotify.o tclXtTest.o GENERIC_OBJS = regcomp.o regexec.o regfree.o regerror.o tclAlloc.o \ tclAsync.o tclBasic.o tclBinary.o tclCkalloc.o tclClock.o \ @@ -309,7 +299,7 @@ GENERIC_OBJS = regcomp.o regexec.o regfree.o regerror.o tclAlloc.o \ tclEnv.o tclEvent.o tclExecute.o tclFCmd.o tclFileName.o tclGet.o \ tclHash.o tclHistory.o tclIndexObj.o tclInterp.o tclIO.o tclIOCmd.o \ tclIORChan.o tclIOGT.o tclIOSock.o tclIOUtil.o tclLink.o tclListObj.o \ - tclLiteral.o tclLoad.o tclMain.o tclNamesp.o tclNotify.o \ + tclLiteral.o tclLoad.o tclMain.o tclMathOp.o tclNamesp.o tclNotify.o \ tclObj.o tclPanic.o tclParse.o tclPathObj.o tclPipe.o \ tclPkg.o tclPkgConfig.o tclPosixStr.o \ tclPreserve.o tclProc.o tclRegexp.o \ @@ -406,6 +396,7 @@ GENERIC_SRCS = \ $(GENERIC_DIR)/tclLiteral.c \ $(GENERIC_DIR)/tclLoad.c \ $(GENERIC_DIR)/tclMain.c \ + $(GENERIC_DIR)/tclMathOp.c \ $(GENERIC_DIR)/tclNamesp.c \ $(GENERIC_DIR)/tclNotify.c \ $(GENERIC_DIR)/tclObj.c \ @@ -539,9 +530,9 @@ MAC_OSX_SRCS = \ $(MAC_OSX_DIR)/tclMacOSXFCmd.c \ $(MAC_OSX_DIR)/tclMacOSXNotify.c -# Note: don't include DL_SRCS or MAC_OSX_SRCS in SRCS: most of those -# files won't compile on the current machine, and they will cause -# problems for things like "make depend". +# Note: don't include DL_SRCS or MAC_OSX_SRCS in SRCS: most of those files +# won't compile on the current machine, and they will cause problems for +# things like "make depend". SRCS = $(GENERIC_SRCS) $(TOMMATH_SRCS) \ $(UNIX_SRCS) $(NOTIFY_SRCS) $(STUB_SRCS) \ @@ -555,8 +546,8 @@ libraries: doc: -# The following target is configured by autoconf to generate either -# a shared library or non-shared library for Tcl. +# The following target is configured by autoconf to generate either a shared +# library or non-shared library for Tcl. ${LIB_FILE}: ${OBJS} ${STUB_LIB_FILE} rm -f $@ @MAKE_LIB@ @@ -565,15 +556,14 @@ ${STUB_LIB_FILE}: ${STUB_LIB_OBJS} rm -f $@ @MAKE_STUB_LIB@ -# Make target which outputs the list of the .o contained in the Tcl lib -# usefull to build a single big shared library containing Tcl and other -# extensions. used for the Tcl Plugin. -- dl -# The dependency on OBJS is not there because we just want the list -# of objects here, not actually building them +# Make target which outputs the list of the .o contained in the Tcl lib useful +# to build a single big shared library containing Tcl and other extensions. +# Used for the Tcl Plugin. -- dl +# The dependency on OBJS is not there because we just want the list of objects +# here, not actually building them tclLibObjs: @echo ${OBJS} -# This targets actually build the objects needed for the lib in the above -# case +# This targets actually build the objects needed for the lib in the above case objs: ${OBJS} @@ -581,10 +571,10 @@ tclsh: ${TCLSH_OBJS} ${TCL_LIB_FILE} ${CC} ${CFLAGS} ${LDFLAGS} ${TCLSH_OBJS} @TCL_BUILD_LIB_SPEC@ ${LIBS} \ ${CC_SEARCH_FLAGS} -o tclsh -# Resetting the LIB_RUNTIME_DIR below is required so that -# the generated tcltest executable gets the build directory -# burned into its ld search path. This keeps tcltest from -# picking up an already installed version of the Tcl library. +# Resetting the LIB_RUNTIME_DIR below is required so that the generated +# tcltest executable gets the build directory burned into its ld search path. +# This keeps tcltest from picking up an already installed version of the Tcl +# library. tcltest: ${TCLTEST_OBJS} ${TCL_LIB_FILE} ${BUILD_DLTEST} $(MAKE) tcltest-real LIB_RUNTIME_DIR=`pwd` @@ -593,11 +583,12 @@ tcltest-real: ${CC} ${CFLAGS} ${LDFLAGS} ${TCLTEST_OBJS} @TCL_BUILD_LIB_SPEC@ ${LIBS} \ ${CC_SEARCH_FLAGS} -o tcltest -# Note, in the target below TCL_LIBRARY needs to be set or else -# "make test" won't work in the case where the compilation directory -# isn't the same as the source directory. -# Specifying TESTFLAGS on the command line is the standard way to pass -# args to tcltest, ie: +# Note, in the targets below TCL_LIBRARY needs to be set or else "make test" +# won't work in the case where the compilation directory isn't the same as the +# source directory. +# +# Specifying TESTFLAGS on the command line is the standard way to pass args to +# tcltest, ie: # % make test TESTFLAGS="-verbose bps -file fileName.test" test: tcltest @@ -658,21 +649,21 @@ valgrindshell: tclsh TCL_LIBRARY="${TCL_BUILDTIME_LIBRARY}"; export TCL_LIBRARY; \ valgrind $(VALGRINDARGS) ./tclsh $(SCRIPT) -# The following target outputs the name of the top-level source directory -# for Tcl (it is used by Tk's configure script, for example). The -# .NO_PARALLEL line is needed to avoid problems under Sun's "pmake". -# Note: this target is now obsolete (use the autoconf variable -# TCL_SRC_DIR from tclConfig.sh instead). +# The following target outputs the name of the top-level source directory for +# Tcl (it is used by Tk's configure script, for example). The .NO_PARALLEL +# line is needed to avoid problems under Sun's "pmake". Note: this target is +# now obsolete (use the autoconf variable TCL_SRC_DIR from tclConfig.sh +# instead). .NO_PARALLEL: topDirName topDirName: @cd $(TOP_DIR); pwd -# The following target generates the file generic/tclDate.c -# from the yacc grammar found in generic/tclGetDate.y. This is -# only run by hand as yacc is not available in all environments. -# The name of the .c file is different than the name of the .y file -# so that make doesn't try to automatically regenerate the .c file. +# The following target generates the file generic/tclDate.c from the yacc +# grammar found in generic/tclGetDate.y. This is only run by hand as yacc is +# not available in all environments. The name of the .c file is different than +# the name of the .y file so that make doesn't try to automatically regenerate +# the .c file. gendate: bison --output-file=$(GENERIC_DIR)/tclDate.c \ @@ -691,20 +682,19 @@ gendate: # <y.tab.c >$(GENERIC_DIR)/tclDate.c # rm y.tab.c -# The following target generates the file generic/tclTomMath.h. -# It needs to be run (and the results checked) after updating -# to a new release of libtommath. +# The following target generates the file generic/tclTomMath.h. It needs to be +# run (and the results checked) after updating to a new release of libtommath. gentommath_h: $(TCL_EXE) "$(TOP_DIR)/tools/fix_tommath_h.tcl" \ "$(TOMMATH_DIR)/tommath.h" \ > "$(GENERIC_DIR)/tclTomMath.h" -# The following target generates the shared libraries in dltest/ that -# are used for testing; they are included as part of the "tcltest" -# target (via the BUILD_DLTEST variable) if dynamic loading is supported -# on this platform. The Makefile in the dltest subdirectory creates -# the dltest.marker file in this directory after a successful build. +# The following target generates the shared libraries in dltest/ that are used +# for testing; they are included as part of the "tcltest" target (via the +# BUILD_DLTEST variable) if dynamic loading is supported on this platform. The +# Makefile in the dltest subdirectory creates the dltest.marker file in this +# directory after a successful build. dltest.marker: cd dltest ; $(MAKE) @@ -718,9 +708,9 @@ install-strip: INSTALL_PROGRAM="$(INSTALL_PROGRAM) ${INSTALL_STRIP_PROGRAM}" \ INSTALL_LIBRARY="$(INSTALL_LIBRARY) ${INSTALL_STRIP_LIBRARY}" -# Note: before running ranlib below, must cd to target directory because -# some ranlibs write to current directory, and this might not always be -# possible (e.g. if installing as root). +# Note: before running ranlib below, must cd to target directory because some +# ranlibs write to current directory, and this might not always be possible +# (e.g. if installing as root). install-binaries: binaries @for i in $(LIB_INSTALL_DIR) $(BIN_INSTALL_DIR) ; \ @@ -899,10 +889,10 @@ distclean: clean depend: makedepend -- $(DEPEND_SWITCHES) -- $(SRCS) -# Test binaries. The rules for tclTestInit.o and xtTestInit.o are -# complicated because they are compiled from tclAppInit.c. Can't use -# the "-o" option because this doesn't work on some strange compilers -# (e.g. UnixWare). +# Test binaries. The rules for tclTestInit.o and xtTestInit.o are complicated +# because they are compiled from tclAppInit.c. Can't use the "-o" option +# because this doesn't work on some strange compilers (e.g. UnixWare). +# # To enable concurrent parallel make of tclsh and tcltest resp xttest, these # targets have to depend on tclsh, this ensures that linking of tclsh with # tclAppInit.o does not execute concurrently with the renaming and recompiling @@ -963,7 +953,7 @@ regerror.o: $(REGHDRS) $(GENERIC_DIR)/regerrs.h $(GENERIC_DIR)/regerror.c tclAppInit.o: $(UNIX_DIR)/tclAppInit.c $(CC) -c $(CC_SWITCHES) $(UNIX_DIR)/tclAppInit.c -# On unix we want to use the normal malloc/free implementation, so we +# On Unix we want to use the normal malloc/free implementation, so we # specifically set the USE_TCLALLOC flag. tclAlloc.o: $(GENERIC_DIR)/tclAlloc.c @@ -1104,6 +1094,9 @@ tclLoadShl.o: $(UNIX_DIR)/tclLoadShl.c tclMain.o: $(GENERIC_DIR)/tclMain.c $(CC) -c $(CC_SWITCHES) $(GENERIC_DIR)/tclMain.c +tclMathOp.o: $(GENERIC_DIR)/tclMathOp.c $(MATHHDRS) + $(CC) -c $(CC_SWITCHES) $(GENERIC_DIR)/tclMathOp.c + tclNamesp.o: $(GENERIC_DIR)/tclNamesp.c $(CC) -c $(CC_SWITCHES) $(GENERIC_DIR)/tclNamesp.c @@ -1127,12 +1120,11 @@ tclPkg.o: $(GENERIC_DIR)/tclPkg.c # TIP #59, embedding of configuration information into the binary library. # -# Part of Tcl's configuration information are the paths where it was -# installed and where it will look for its libraries (which can be -# different). We derive this information from the variables which can -# be overridden by the user. As every path can be configured -# separately we do not remember one general prefix/exec_prefix but all -# the different paths individually. +# Part of Tcl's configuration information are the paths where it was installed +# and where it will look for its libraries (which can be different). We derive +# this information from the variables which can be overridden by the user. As +# every path can be configured separately we do not remember one general +# prefix/exec_prefix but all the different paths individually. tclPkgConfig.o: $(GENERIC_DIR)/tclPkgConfig.c $(CC) -c $(CC_SWITCHES) \ @@ -1453,9 +1445,9 @@ tclMacOSXFCmd.o: $(MAC_OSX_DIR)/tclMacOSXFCmd.c tclMacOSXNotify.o: $(MAC_OSX_DIR)/tclMacOSXNotify.c $(CC) -c $(CC_SWITCHES) $(MAC_OSX_DIR)/tclMacOSXNotify.c -# The following targets are not completely general. They are provide -# purely for documentation purposes so people who are interested in -# the Xt based notifier can modify them to suit their own installation. +# The following targets are not completely general. They are provide purely +# for documentation purposes so people who are interested in the Xt based +# notifier can modify them to suit their own installation. xttest: ${XTTEST_OBJS} ${GENERIC_OBJS} ${UNIX_OBJS} ${COMPAT_OBJS} \ @DL_OBJS@ ${BUILD_DLTEST} @@ -1471,10 +1463,10 @@ tclXtTest.o: $(UNIX_DIR)/tclXtTest.c $(CC) -c $(CC_SWITCHES) -I/usr/openwin/include \ $(UNIX_DIR)/tclXtTest.c -# compat binaries, these must be compiled for use in a shared library -# even though they may be placed in a static executable or library. Since -# they are included in both the tcl library and the stub library, they -# need to be relocatable. +# Compat binaries, these must be compiled for use in a shared library even +# though they may be placed in a static executable or library. Since they are +# included in both the tcl library and the stub library, they need to be +# relocatable. fixstrtod.o: $(COMPAT_DIR)/fixstrtod.c $(CC) -c $(STUB_CC_SWITCHES) $(COMPAT_DIR)/fixstrtod.c @@ -1555,9 +1547,8 @@ checkstubs: $(TCL_LIB_FILE) done # -# Target to check that all public APIs which are not command -# implementations have an entry in section three of the distributed -# manpages. +# Target to check that all public APIs which are not command implementations +# have an entry in section three of the distributed manpages. # checkdoc: $(TCL_LIB_FILE) @@ -1580,8 +1571,7 @@ checkuchar: -egrep isalnum\|isalpha\|iscntrl\|isdigit\|islower\|isprint\|ispunct\|isspace\|isupper\|isxdigit\|toupper\|tolower $(SRCS) | grep -v UCHAR # -# Target to make sure that only symbols with "Tcl" prefixes are -# exported. +# Target to make sure that only symbols with "Tcl" prefixes are exported. # checkexports: $(TCL_LIB_FILE) @@ -1590,7 +1580,7 @@ checkexports: $(TCL_LIB_FILE) | sort -n | grep -E -v '^[Tt]cl' || true # -# Target to create a Tcl RPM for Linux. Requires that you be on a Linux +# Target to create a Tcl RPM for Linux. Requires that you be on a Linux # system. # @@ -1605,9 +1595,9 @@ rpm: all /bin/rpm rm -rf RPMS THIS.TCL.SPEC # -# Target to create a proper Tcl distribution from information in the -# master source directory. DISTDIR must be defined to indicate where -# to put the distribution. DISTDIR must be an absolute path name. +# Target to create a proper Tcl distribution from information in the master +# source directory. DISTDIR must be defined to indicate where to put the +# distribution. DISTDIR must be an absolute path name. # DISTROOT = /tmp/dist @@ -1721,8 +1711,8 @@ dist: $(UNIX_DIR)/configure $(UNIX_DIR)/tclConfig.h.in $(DISTDIR)/libtommath # -# The following target can only be used for non-patch releases. Use -# the "allpatch" target below for patch releases. +# The following target can only be used for non-patch releases. Use the +# "allpatch" target below for patch releases. # alldist: dist @@ -1731,11 +1721,11 @@ alldist: dist gzip -9 $(DISTNAME)-src.tar; zip -qr8 $(ZIPNAME) $(DISTNAME) # -# The target below is similar to "alldist" except it works for patch -# releases. It is needed because patch releases are peculiar: the -# patch designation appears in the name of the compressed file -# (e.g. tcl8.0p1.tar.gz) but the extracted source directory doesn't -# include the patch designation (e.g. tcl8.0). +# The target below is similar to "alldist" except it works for patch releases. +# It is needed because patch releases are peculiar: the patch designation +# appears in the name of the compressed file (e.g. tcl8.0p1.tar.gz) but the +# extracted source directory doesn't include the patch designation (e.g., +# tcl8.0). # allpatch: dist @@ -1748,11 +1738,10 @@ allpatch: dist mv $(DISTROOT)/old $(DISTROOT)/tcl${VERSION} # -# This target creates the HTML folder for Tcl & Tk and places it -# in DISTDIR/html. It uses the tcltk-man2html.tcl tool from -# the Tcl group's tool workspace. It depends on the Tcl & Tk being -# in directories called tcl8.* & tk8.* up two directories from the -# TOOL_DIR. +# This target creates the HTML folder for Tcl & Tk and places it in +# DISTDIR/html. It uses the tcltk-man2html.tcl tool from the Tcl group's tool +# workspace. It depends on the Tcl & Tk being in directories called tcl8.* & +# tk8.* up two directories from the TOOL_DIR. # html: @@ -1773,23 +1762,21 @@ BUILD_HTML = \ # # Targets to build Solaris package of the distribution for the current -# architecture. To build stream packages for both sun4 and i86pc -# architectures: +# architecture. To build stream packages for both sun4 and i86pc +# architectures: # # On the sun4 machine, execute the following: # make distclean; ./configure # make DISTDIR=<distdir> package # -# Once the build is complete, execute the following on the i86pc -# machine: +# Once the build is complete, execute the following on the i86pc machine: # make DISTDIR=<distdir> package-quick # -# <distdir> is the absolute path to a directory where the build should -# take place. These steps will generate the $(PACKAGE).sun4 and -# $(PACKAGE).i86pc stream packages. It is important that the packages be -# built in this fashion in order to ensure that the architecture -# independent files are exactly the same, including timestamps, in -# both packages. +# <distdir> is the absolute path to a directory where the build should take +# place. These steps will generate the $(PACKAGE).sun4 and $(PACKAGE).i86pc +# stream packages. It is important that the packages be built in this fashion +# in order to ensure that the architecture independent files are exactly the +# same, including timestamps, in both packages. # PACKAGE=SCRPtcl @@ -1828,7 +1815,7 @@ package-common: # Build and install the architecture specific files in the dist directory. # -package-binaries: +package-binaries: cd $(DISTDIR)/unix/`arch`; \ $(MAKE); \ $(MAKE) install-binaries prefix=$(DISTDIR)/$(PACKAGE)/$(VERSION) \ |