diff options
Diffstat (limited to 'unix/Makefile.in')
| -rw-r--r-- | unix/Makefile.in | 154 |
1 files changed, 83 insertions, 71 deletions
diff --git a/unix/Makefile.in b/unix/Makefile.in index 7b5d57b..d2c828f 100644 --- a/unix/Makefile.in +++ b/unix/Makefile.in @@ -5,7 +5,7 @@ # "autoconf" program (constructs like "@foo@" will get replaced in the # actual Makefile. # -# RCS: @(#) $Id: Makefile.in,v 1.61 2000/04/05 00:42:38 welch Exp $ +# RCS: @(#) $Id: Makefile.in,v 1.62 2000/04/19 08:32:45 hobbs Exp $ VERSION = @TCL_VERSION@ @@ -20,10 +20,15 @@ VERSION = @TCL_VERSION@ # specific files (exec_prefix) and machine-independent files such # as scripts (prefix). The values specified here may be overridden # at configure-time with the --exec-prefix and --prefix options -# to the "configure" script. +# to the "configure" script. The *dir vars are standard configure +# substitutions that are based off prefix and exec_prefix. prefix = @prefix@ exec_prefix = @exec_prefix@ +bindir = @bindir@ +libdir = @libdir@ +includedir = @includedir@ +mandir = @mandir@ # The following definition can be set to non-null for special systems # like AFS with replication. It allows the pathnames used for installation @@ -32,37 +37,38 @@ exec_prefix = @exec_prefix@ # when installing files. INSTALL_ROOT = -TCL_LIBRARY = $(prefix)/lib/tcl$(VERSION) +# Path for the platform independent Tcl scripting libraries: +TCL_LIBRARY = $(prefix)/lib/tcl$(VERSION) # Path to use at runtime to refer to LIB_INSTALL_DIR: -LIB_RUNTIME_DIR = $(exec_prefix)/lib +LIB_RUNTIME_DIR = $(libdir) # Directory in which to install the program tclsh: -BIN_INSTALL_DIR = $(INSTALL_ROOT)$(exec_prefix)/bin +BIN_INSTALL_DIR = $(INSTALL_ROOT)$(bindir) # Directory in which to install libtcl.so or libtcl.a: -LIB_INSTALL_DIR = $(INSTALL_ROOT)$(exec_prefix)/lib +LIB_INSTALL_DIR = $(INSTALL_ROOT)$(libdir) # Path name to use when installing library scripts. Don't # include $(prefix) here since it's already part of $(TCL_LIBRARY) -SCRIPT_INSTALL_DIR = $(INSTALL_ROOT)$(TCL_LIBRARY) +SCRIPT_INSTALL_DIR = $(INSTALL_ROOT)$(TCL_LIBRARY) # Directory in which to install the include file tcl.h: -INCLUDE_INSTALL_DIR = $(INSTALL_ROOT)$(prefix)/include +INCLUDE_INSTALL_DIR = $(INSTALL_ROOT)$(includedir) # Top-level directory in which to install manual entries: -MAN_INSTALL_DIR = $(INSTALL_ROOT)@mandir@ +MAN_INSTALL_DIR = $(INSTALL_ROOT)$(mandir) # Directory in which to install manual entry for tclsh: -MAN1_INSTALL_DIR = $(MAN_INSTALL_DIR)/man1 +MAN1_INSTALL_DIR = $(MAN_INSTALL_DIR)/man1 # Directory in which to install manual entries for Tcl's C library # procedures: -MAN3_INSTALL_DIR = $(MAN_INSTALL_DIR)/man3 +MAN3_INSTALL_DIR = $(MAN_INSTALL_DIR)/man3 # Directory in which to install manual entries for the built-in # Tcl commands: -MANN_INSTALL_DIR = $(MAN_INSTALL_DIR)/mann +MANN_INSTALL_DIR = $(MAN_INSTALL_DIR)/mann # Package search path. TCL_PACKAGE_PATH = @TCL_PACKAGE_PATH@ @@ -79,23 +85,23 @@ CFLAGS_OPTIMIZE = @CFLAGS_OPTIMIZE@ # To change the compiler switches, for example to change from optimization to # debugging symbols, change the following line: -#CFLAGS = $(CFLAGS_DEBUG) -#CFLAGS = $(CFLAGS_OPTIMIZE) -#CFLAGS = $(CFLAGS_DEBUG) $(CFLAGS_OPTIMIZE) -CFLAGS = @CFLAGS@ +#CFLAGS = $(CFLAGS_DEBUG) +#CFLAGS = $(CFLAGS_OPTIMIZE) +#CFLAGS = $(CFLAGS_DEBUG) $(CFLAGS_OPTIMIZE) +CFLAGS = @CFLAGS@ # To disable ANSI-C procedure prototypes reverse the comment characters # on the following lines: -PROTO_FLAGS = -#PROTO_FLAGS = -DNO_PROTOTYPE +PROTO_FLAGS = +#PROTO_FLAGS = -DNO_PROTOTYPE # Mathematical functions like sin and atan2 are enabled for expressions # by default. To disable them, reverse the comment characters on the # following pairs of lines: -MATH_FLAGS = -#MATH_FLAGS = -DTCL_NO_MATH -MATH_LIBS = @MATH_LIBS@ -#MATH_LIBS = +MATH_FLAGS = +#MATH_FLAGS = -DTCL_NO_MATH +MATH_LIBS = @MATH_LIBS@ +#MATH_LIBS = # If you use the setenv, putenv, or unsetenv procedures to modify # environment variables in your application and you'd like those @@ -124,41 +130,41 @@ NOTIFY_OBJS = tclUnixNotfy.o # lines. Warning: if you enable memory debugging, you must do it # *everywhere*, including all the code that calls Tcl, and you must use # ckalloc and ckfree everywhere instead of malloc and free. -MEM_DEBUG_FLAGS = -#MEM_DEBUG_FLAGS = -DTCL_MEM_DEBUG +MEM_DEBUG_FLAGS = +#MEM_DEBUG_FLAGS = -DTCL_MEM_DEBUG # To enable support for stubs in Tcl. -STUB_LIB_FILE = @STUB_LIB_FILE@ +STUB_LIB_FILE = @STUB_LIB_FILE@ -TCL_STUB_LIB_FILE = @TCL_STUB_LIB_FILE@ -#TCL_STUB_LIB_FILE = libtclstub.a +TCL_STUB_LIB_FILE = @TCL_STUB_LIB_FILE@ +#TCL_STUB_LIB_FILE = libtclstub.a -TCL_STUB_LIB_FLAG = @TCL_STUB_LIB_FLAG@ -#TCL_STUB_LIB_FLAG = -ltclstub +TCL_STUB_LIB_FLAG = @TCL_STUB_LIB_FLAG@ +#TCL_STUB_LIB_FLAG = -ltclstub # To enable compilation debugging reverse the comment characters on # one of the following lines. -COMPILE_DEBUG_FLAGS = -#COMPILE_DEBUG_FLAGS = -DTCL_COMPILE_STATS -#COMPILE_DEBUG_FLAGS = -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS +COMPILE_DEBUG_FLAGS = +#COMPILE_DEBUG_FLAGS = -DTCL_COMPILE_STATS +#COMPILE_DEBUG_FLAGS = -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS # To compile without backward compatibility and deprecated code # uncomment the following -NO_DEPRECATED_FLAGS= -#NO_DEPRECATED_FLAGS= -DTCL_NO_DEPRECATED +NO_DEPRECATED_FLAGS = +#NO_DEPRECATED_FLAGS = -DTCL_NO_DEPRECATED # Some versions of make, like SGI's, use the following variable to # determine which shell to use for executing commands: -SHELL = /bin/sh +SHELL = /bin/sh # Tcl used to let the configure script choose which program to use # for installing, but there are just too many different versions of # "install" around; better to use the install-sh script that comes # with the distribution, which is slower but guaranteed to work. -INSTALL = @srcdir@/install-sh -c -INSTALL_PROGRAM = ${INSTALL} -INSTALL_DATA = ${INSTALL} -m 644 +INSTALL = @srcdir@/install-sh -c +INSTALL_PROGRAM = ${INSTALL} +INSTALL_DATA = ${INSTALL} -m 644 # The symbols below provide support for dynamic loading and shared # libraries. See configure.in for a description of what the @@ -166,31 +172,31 @@ INSTALL_DATA = ${INSTALL} -m 644 # configure script. You shouldn't normally need to modify any of # these definitions by hand. -STLIB_LD = @STLIB_LD@ -SHLIB_LD = @SHLIB_LD@ -SHLIB_CFLAGS = @SHLIB_CFLAGS@ +STLIB_LD = @STLIB_LD@ +SHLIB_LD = @SHLIB_LD@ +SHLIB_CFLAGS = @SHLIB_CFLAGS@ -SHLIB_SUFFIX = @SHLIB_SUFFIX@ -#SHLIB_SUFFIX = +SHLIB_SUFFIX = @SHLIB_SUFFIX@ +#SHLIB_SUFFIX = -DLTEST_TARGETS = dltest/pkg5${SHLIB_SUFFIX} dltest/Makefile +DLTEST_TARGETS = dltest/pkg5${SHLIB_SUFFIX} dltest/Makefile # The following symbol is defined to "$(DLTEST_TARGETS)" if dynamic # loading is available; this causes everything in the "dltest" # subdirectory to be built when making "tcltest. If dynamic loading # isn't available, configure defines this symbol to an empty string, # in which case the shared libraries aren't built. -BUILD_DLTEST = @BUILD_DLTEST@ -#BUILD_DLTEST = +BUILD_DLTEST = @BUILD_DLTEST@ +#BUILD_DLTEST = -TCL_LIB_FILE = @TCL_LIB_FILE@ -#TCL_LIB_FILE = libtcl.a +TCL_LIB_FILE = @TCL_LIB_FILE@ +#TCL_LIB_FILE = libtcl.a -TCL_LIB_FLAG = @TCL_LIB_FLAG@ -#TCL_LIB_FLAG = -ltcl +TCL_LIB_FLAG = @TCL_LIB_FLAG@ +#TCL_LIB_FLAG = -ltcl -TCL_EXP_FILE = @TCL_EXP_FILE@ -TCL_BUILD_EXP_FILE = @TCL_BUILD_EXP_FILE@ +TCL_EXP_FILE = @TCL_EXP_FILE@ +TCL_BUILD_EXP_FILE = @TCL_BUILD_EXP_FILE@ #---------------------------------------------------------------- # The information below is modified by the configure script when @@ -198,23 +204,23 @@ TCL_BUILD_EXP_FILE = @TCL_BUILD_EXP_FILE@ # modify any of this stuff by hand. #---------------------------------------------------------------- -COMPAT_OBJS = @LIBOBJS@ +COMPAT_OBJS = @LIBOBJS@ -AC_FLAGS = @EXTRA_CFLAGS@ @DEFS@ -RANLIB = @RANLIB@ -SRC_DIR = @srcdir@ -TOP_DIR = @srcdir@/.. -GENERIC_DIR = $(TOP_DIR)/generic -COMPAT_DIR = $(TOP_DIR)/compat -TOOL_DIR = $(TOP_DIR)/tools -UNIX_DIR = $(TOP_DIR)/unix +AC_FLAGS = @EXTRA_CFLAGS@ @DEFS@ +RANLIB = @RANLIB@ +SRC_DIR = @srcdir@ +TOP_DIR = @srcdir@/.. +GENERIC_DIR = $(TOP_DIR)/generic +COMPAT_DIR = $(TOP_DIR)/compat +TOOL_DIR = $(TOP_DIR)/tools +UNIX_DIR = $(TOP_DIR)/unix # Must be absolute because of the cd dltest $(DLTEST_DIR)/configure below. -DLTEST_DIR = @TCL_SRC_DIR@/unix/dltest +DLTEST_DIR = @TCL_SRC_DIR@/unix/dltest # Must be absolute to so the corresponding tcltest's tcl_library is absolute. -TCL_BUILDTIME_LIBRARY= @TCL_SRC_DIR@/library +TCL_BUILDTIME_LIBRARY = @TCL_SRC_DIR@/library -#CC = purify -best-effort @CC@ -CC = @CC@ +#CC = purify -best-effort @CC@ +CC = @CC@ #---------------------------------------------------------------- # The information below should be usable as is. The configure @@ -223,7 +229,7 @@ CC = @CC@ #---------------------------------------------------------------- -CC_SWITCHES = ${CFLAGS} ${CFLAGS_WARNING} ${SHLIB_CFLAGS} \ +CC_SWITCHES = ${CFLAGS} ${CFLAGS_WARNING} ${SHLIB_CFLAGS} \ -I${GENERIC_DIR} -I${SRC_DIR} \ ${AC_FLAGS} ${MATH_FLAGS} ${GENERIC_FLAGS} ${PROTO_FLAGS} ${MEM_DEBUG_FLAGS} \ ${COMPILE_DEBUG_FLAGS} ${NO_DEPRECATED_FLAGS} ${ENV_FLAGS} \ @@ -234,9 +240,9 @@ STUB_CC_SWITCHES = ${CFLAGS} ${CFLAGS_WARNING} ${SHLIB_CFLAGS} \ ${AC_FLAGS} ${MATH_FLAGS} ${GENERIC_FLAGS} ${PROTO_FLAGS} ${MEM_DEBUG_FLAGS} \ ${COMPILE_DEBUG_FLAGS} ${ENV_FLAGS} -DTCL_SHLIB_EXT=\"${SHLIB_SUFFIX}\" -LIBS = @DL_LIBS@ @LIBS@ $(MATH_LIBS) -lc +LIBS = @DL_LIBS@ @LIBS@ $(MATH_LIBS) -lc -DEPEND_SWITCHES = ${CFLAGS} -I${GENERIC_DIR} -I${SRC_DIR} \ +DEPEND_SWITCHES = ${CFLAGS} -I${GENERIC_DIR} -I${SRC_DIR} \ ${AC_FLAGS} ${MATH_FLAGS} \ ${GENERIC_FLAGS} ${PROTO_FLAGS} ${MEM_DEBUG_FLAGS} \ -DTCL_SHLIB_EXT=\"${SHLIB_SUFFIX}\" @@ -371,6 +377,7 @@ DL_SRCS = \ $(UNIX_DIR)/tclLoadDl.c \ $(UNIX_DIR)/tclLoadDl2.c \ $(UNIX_DIR)/tclLoadDld.c \ + $(UNIX_DIR)/tclLoadDyld.c \ $(GENERIC_DIR)/tclLoadNone.c \ $(UNIX_DIR)/tclLoadOSF.c \ $(UNIX_DIR)/tclLoadShl.c @@ -460,7 +467,7 @@ topDirName: gendate: yacc -l $(GENERIC_DIR)/tclGetDate.y sed -e 's/yy/TclDate/g' -e '/^#include <values.h>/d' \ - -e 's?SCCSID?RCS: @(#) $$Id: Makefile.in,v 1.61 2000/04/05 00:42:38 welch Exp $$?' \ + -e 's?SCCSID?RCS: @(#) $$Id: Makefile.in,v 1.62 2000/04/19 08:32:45 hobbs Exp $$?' \ -e '/#ifdef __STDC__/,/#endif/d' -e '/TclDateerrlab:/d' \ -e '/TclDatenewstate:/d' -e '/#pragma/d' \ -e '/#include <inttypes.h>/d' -e 's/const /CONST /g' \ @@ -487,6 +494,9 @@ dltest/Makefile: $(DLTEST_DIR)/configure $(DLTEST_DIR)/Makefile.in tclConfig.sh install: install-binaries install-libraries install-doc +install-strip: + $(MAKE) install INSTALL_PROGRAM="$(INSTALL_PROGRAM) -s" + # Note: before running ranlib below, must cd to target directory because # some ranlibs write to current directory, and this might not always be # possible (e.g. if installing as root). @@ -524,8 +534,7 @@ install-binaries: binaries fi install-libraries: libraries - @for i in $(INSTALL_ROOT)$(prefix)/lib $(INCLUDE_INSTALL_DIR) \ - $(SCRIPT_INSTALL_DIR); \ + @for i in $(INCLUDE_INSTALL_DIR) $(SCRIPT_INSTALL_DIR); \ do \ if [ ! -d $$i ] ; then \ echo "Making directory $$i"; \ @@ -803,6 +812,9 @@ tclLoadDl2.o: $(UNIX_DIR)/tclLoadDl2.c tclLoadDld.o: $(UNIX_DIR)/tclLoadDld.c $(CC) -c $(CC_SWITCHES) $(UNIX_DIR)/tclLoadDld.c +tclLoadDyld.o: $(UNIX_DIR)/tclLoadDyld.c + $(CC) -c $(CC_SWITCHES) $(UNIX_DIR)/tclLoadDyld.c + tclLoadNone.o: $(GENERIC_DIR)/tclLoadNone.c $(CC) -c $(CC_SWITCHES) $(GENERIC_DIR)/tclLoadNone.c |