diff options
Diffstat (limited to 'unix/tclUnixChan.c')
| -rw-r--r-- | unix/tclUnixChan.c | 1865 |
1 files changed, 844 insertions, 1021 deletions
diff --git a/unix/tclUnixChan.c b/unix/tclUnixChan.c index 7018e15..93bb1fe 100644 --- a/unix/tclUnixChan.c +++ b/unix/tclUnixChan.c @@ -1,47 +1,28 @@ -/* +/* * tclUnixChan.c * - * Common channel driver for Unix channels based on files, command - * pipes and TCP sockets. + * Common channel driver for Unix channels based on files, command pipes + * and TCP sockets. * * Copyright (c) 1995-1997 Sun Microsystems, Inc. * Copyright (c) 1998-1999 by Scriptics Corporation. * - * See the file "license.terms" for information on usage and redistribution - * of this file, and for a DISCLAIMER OF ALL WARRANTIES. + * See the file "license.terms" for information on usage and redistribution of + * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tclInt.h" /* Internal definitions for Tcl. */ -#include "tclPort.h" /* Portability features for Tcl. */ #include "tclIO.h" /* To get Channel type declaration. */ -/* - * sys/ioctl.h has already been included by tclPort.h. Including termios.h - * or termio.h causes a bunch of warning messages because some duplicate - * (but not contradictory) #defines exist in termios.h and/or termio.h - */ -#undef NL0 -#undef NL1 -#undef CR0 -#undef CR1 -#undef CR2 -#undef CR3 -#undef TAB0 -#undef TAB1 -#undef TAB2 -#undef XTABS -#undef BS0 -#undef BS1 -#undef FF0 -#undef FF1 -#undef ECHO -#undef NOFLSH -#undef TOSTOP -#undef FLUSHO -#undef PENDIN - #define SUPPORTS_TTY +#undef DIRECT_BAUD +#ifdef B4800 +# if (B4800 == 4800) +# define DIRECT_BAUD +# endif /* B4800 == 4800 */ +#endif /* B4800 */ + #ifdef USE_TERMIOS # include <termios.h> # ifdef HAVE_SYS_IOCTL_H @@ -55,22 +36,7 @@ # define SETIOSTATE(fd, statePtr) tcsetattr((fd), TCSADRAIN, (statePtr)) # define GETCONTROL(fd, intPtr) ioctl((fd), TIOCMGET, (intPtr)) # define SETCONTROL(fd, intPtr) ioctl((fd), TIOCMSET, (intPtr)) - /* - * TIP #35 introduced a different on exit flush/close behavior that - * doesn't work correctly with standard channels on all systems. - * The problem is tcflush throws away waiting channel data. This may - * be necessary for true serial channels that may block, but isn't - * correct in the standard case. This might be replaced with tcdrain - * instead, but that can block. For now, we revert to making this do - * nothing, and TtyOutputProc being the same old FileOutputProc. - * -- hobbs [Bug #525783] - */ -# define BAD_TIP35_FLUSH 0 -# if BAD_TIP35_FLUSH -# define TTYFLUSH(fd) tcflush((fd), TCIOFLUSH); -# else -# define TTYFLUSH(fd) -# endif /* BAD_TIP35_FLUSH */ + # ifdef FIONREAD # define GETREADQUEUE(fd, int) ioctl((fd), FIONREAD, &(int)) # elif defined(FIORDCHK) @@ -80,10 +46,12 @@ # define GETWRITEQUEUE(fd, int) ioctl((fd), TIOCOUTQ, &(int)) # endif /* TIOCOUTQ */ # if defined(TIOCSBRK) && defined(TIOCCBRK) + /* - * Can't use ?: operator below because that messes up types on either - * Linux or Solaris (the two are mutually exclusive!) + * Can't use ?: operator below because that messes up types on either Linux or + * Solaris (the two are mutually exclusive!) */ + # define SETBREAK(fd, flag) \ if (flag) { \ ioctl((fd), TIOCSBRK, NULL); \ @@ -119,6 +87,15 @@ #endif /* !USE_TERMIOS */ /* + * Helper macros to make parts of this file clearer. The macros do exactly + * what they say on the tin. :-) They also only ever refer to their arguments + * once, and so can be used without regard to side effects. + */ + +#define SET_BITS(var, bits) ((var) |= (bits)) +#define CLEAR_BITS(var, bits) ((var) &= ~(bits)) + +/* * This structure describes per-instance state of a file based channel. */ @@ -128,10 +105,6 @@ typedef struct FileState { int validMask; /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, or TCL_EXCEPTION: indicates * which operations are valid on the file. */ -#ifdef DEPRECATED - struct FileState *nextPtr; /* Pointer to next file in list of all - * file channels. */ -#endif /* DEPRECATED */ } FileState; #ifdef SUPPORTS_TTY @@ -142,17 +115,15 @@ typedef struct FileState { */ typedef struct TtyState { - FileState fs; /* Per-instance state of the file - * descriptor. Must be the first field. */ - int stateUpdated; /* Flag to say if the state has been - * modified and needs resetting. */ - IOSTATE savedState; /* Initial state of device. Used to reset + FileState fs; /* Per-instance state of the file descriptor. + * Must be the first field. */ + IOSTATE savedState; /* Initial state of device. Used to reset * state when device closed. */ } TtyState; /* - * The following structure is used to set or get the serial port - * attributes in a platform-independant manner. + * The following structure is used to set or get the serial port attributes in + * a platform-independant manner. */ typedef struct TtyAttrs { @@ -165,23 +136,10 @@ typedef struct TtyAttrs { #endif /* !SUPPORTS_TTY */ #define UNSUPPORTED_OPTION(detail) \ - if (interp) { \ - Tcl_AppendResult(interp, (detail), \ - " not supported for this platform", (char *) NULL); \ - } - -#ifdef DEPRECATED -typedef struct ThreadSpecificData { - /* - * List of all file channels currently open. This is per thread and is - * used to match up fd's to channels, which rarely occurs. - */ - - FileState *firstFilePtr; -} ThreadSpecificData; - -static Tcl_ThreadDataKey dataKey; -#endif /* DEPRECATED */ + if (interp) { \ + Tcl_AppendResult(interp, (detail), \ + " not supported for this platform", NULL); \ + } /* * This structure describes per-instance state of a tcp based channel. @@ -190,8 +148,8 @@ static Tcl_ThreadDataKey dataKey; typedef struct TcpState { Tcl_Channel channel; /* Channel associated with this file. */ int fd; /* The socket itself. */ - int flags; /* ORed combination of the bitfields - * defined below. */ + int flags; /* ORed combination of the bitfields defined + * below. */ Tcl_TcpAcceptProc *acceptProc; /* Proc to call on accept. */ ClientData acceptProcData; /* The data for the accept proc. */ @@ -206,10 +164,10 @@ typedef struct TcpState { #define TCP_ASYNC_CONNECT (1<<1) /* Async connect in progress. */ /* - * The following defines the maximum length of the listen queue. This is - * the number of outstanding yet-to-be-serviced requests for a connection - * on a server socket, more than this number of outstanding requests and - * the connection request will fail. + * The following defines the maximum length of the listen queue. This is the + * number of outstanding yet-to-be-serviced requests for a connection on a + * server socket, more than this number of outstanding requests and the + * connection request will fail. */ #ifndef SOMAXCONN @@ -222,8 +180,8 @@ typedef struct TcpState { #endif /* SOMAXCONN < 100 */ /* - * The following defines how much buffer space the kernel should maintain - * for a socket. + * The following defines how much buffer space the kernel should maintain for + * a socket. */ #define SOCKET_BUFSIZE 4096 @@ -232,77 +190,64 @@ typedef struct TcpState { * Static routines for this file: */ -static TcpState * CreateSocket _ANSI_ARGS_((Tcl_Interp *interp, - int port, CONST char *host, int server, - CONST char *myaddr, int myport, int async)); -static int CreateSocketAddress _ANSI_ARGS_( - (struct sockaddr_in *sockaddrPtr, - CONST char *host, int port)); -static int FileBlockModeProc _ANSI_ARGS_(( - ClientData instanceData, int mode)); -static int FileCloseProc _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp)); -static int FileGetHandleProc _ANSI_ARGS_((ClientData instanceData, - int direction, ClientData *handlePtr)); -static int FileInputProc _ANSI_ARGS_((ClientData instanceData, - char *buf, int toRead, int *errorCode)); -static int FileOutputProc _ANSI_ARGS_(( - ClientData instanceData, CONST char *buf, - int toWrite, int *errorCode)); -static int FileSeekProc _ANSI_ARGS_((ClientData instanceData, - long offset, int mode, int *errorCode)); -#ifdef DEPRECATED -static void FileThreadActionProc _ANSI_ARGS_ (( - ClientData instanceData, int action)); -#endif -static Tcl_WideInt FileWideSeekProc _ANSI_ARGS_((ClientData instanceData, - Tcl_WideInt offset, int mode, int *errorCode)); -static void FileWatchProc _ANSI_ARGS_((ClientData instanceData, - int mask)); -static void TcpAccept _ANSI_ARGS_((ClientData data, int mask)); -static int TcpBlockModeProc _ANSI_ARGS_((ClientData data, - int mode)); -static int TcpCloseProc _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp)); -static int TcpGetHandleProc _ANSI_ARGS_((ClientData instanceData, - int direction, ClientData *handlePtr)); -static int TcpGetOptionProc _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp, CONST char *optionName, - Tcl_DString *dsPtr)); -static int TcpInputProc _ANSI_ARGS_((ClientData instanceData, - char *buf, int toRead, int *errorCode)); -static int TcpOutputProc _ANSI_ARGS_((ClientData instanceData, - CONST char *buf, int toWrite, int *errorCode)); -static void TcpWatchProc _ANSI_ARGS_((ClientData instanceData, - int mask)); +static TcpState * CreateSocket(Tcl_Interp *interp, int port, + const char *host, int server, const char *myaddr, + int myport, int async); +static int CreateSocketAddress(struct sockaddr_in *sockaddrPtr, + const char *host, int port, int willBind, + const char **errorMsgPtr); +static int FileBlockModeProc(ClientData instanceData, int mode); +static int FileCloseProc(ClientData instanceData, + Tcl_Interp *interp); +static int FileGetHandleProc(ClientData instanceData, + int direction, ClientData *handlePtr); +static int FileInputProc(ClientData instanceData, char *buf, + int toRead, int *errorCode); +static int FileOutputProc(ClientData instanceData, + const char *buf, int toWrite, int *errorCode); +static int FileSeekProc(ClientData instanceData, long offset, + int mode, int *errorCode); +static int FileTruncateProc(ClientData instanceData, + Tcl_WideInt length); +static Tcl_WideInt FileWideSeekProc(ClientData instanceData, + Tcl_WideInt offset, int mode, int *errorCode); +static void FileWatchProc(ClientData instanceData, int mask); +static void TcpAccept(ClientData data, int mask); +static int TcpBlockModeProc(ClientData data, int mode); +static int TcpCloseProc(ClientData instanceData, + Tcl_Interp *interp); +static int TcpGetHandleProc(ClientData instanceData, + int direction, ClientData *handlePtr); +static int TcpGetOptionProc(ClientData instanceData, + Tcl_Interp *interp, const char *optionName, + Tcl_DString *dsPtr); +static int TcpInputProc(ClientData instanceData, char *buf, + int toRead, int *errorCode); +static int TcpOutputProc(ClientData instanceData, + const char *buf, int toWrite, int *errorCode); +static void TcpWatchProc(ClientData instanceData, int mask); #ifdef SUPPORTS_TTY -static int TtyCloseProc _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp)); -static void TtyGetAttributes _ANSI_ARGS_((int fd, - TtyAttrs *ttyPtr)); -static int TtyGetOptionProc _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp, CONST char *optionName, - Tcl_DString *dsPtr)); -static FileState * TtyInit _ANSI_ARGS_((int fd, int initialize)); -#if BAD_TIP35_FLUSH -static int TtyOutputProc _ANSI_ARGS_((ClientData instanceData, - CONST char *buf, int toWrite, int *errorCode)); -#endif /* BAD_TIP35_FLUSH */ -static int TtyParseMode _ANSI_ARGS_((Tcl_Interp *interp, - CONST char *mode, int *speedPtr, int *parityPtr, - int *dataPtr, int *stopPtr)); -static void TtySetAttributes _ANSI_ARGS_((int fd, - TtyAttrs *ttyPtr)); -static int TtySetOptionProc _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp, CONST char *optionName, - CONST char *value)); +static void TtyGetAttributes(int fd, TtyAttrs *ttyPtr); +static int TtyGetOptionProc(ClientData instanceData, + Tcl_Interp *interp, const char *optionName, + Tcl_DString *dsPtr); +#ifndef DIRECT_BAUD +static int TtyGetBaud(unsigned long speed); +static unsigned long TtyGetSpeed(int baud); +#endif /* DIRECT_BAUD */ +static FileState * TtyInit(int fd, int initialize); +static void TtyModemStatusStr(int status, Tcl_DString *dsPtr); +static int TtyParseMode(Tcl_Interp *interp, const char *mode, + int *speedPtr, int *parityPtr, int *dataPtr, + int *stopPtr); +static void TtySetAttributes(int fd, TtyAttrs *ttyPtr); +static int TtySetOptionProc(ClientData instanceData, + Tcl_Interp *interp, const char *optionName, + const char *value); #endif /* SUPPORTS_TTY */ -static int WaitForConnect _ANSI_ARGS_((TcpState *statePtr, - int *errorCodePtr)); -static Tcl_Channel MakeTcpClientChannelMode _ANSI_ARGS_( - (ClientData tcpSocket, - int mode)); - +static int WaitForConnect(TcpState *statePtr, int *errorCodePtr); +static Tcl_Channel MakeTcpClientChannelMode(ClientData tcpSocket, + int mode); /* * This structure describes the channel type structure for file based IO: @@ -310,7 +255,7 @@ static Tcl_Channel MakeTcpClientChannelMode _ANSI_ARGS_( static Tcl_ChannelType fileChannelType = { "file", /* Type name. */ - TCL_CHANNEL_VERSION_4, /* v4 channel */ + TCL_CHANNEL_VERSION_5, /* v5 channel */ FileCloseProc, /* Close proc. */ FileInputProc, /* Input proc. */ FileOutputProc, /* Output proc. */ @@ -324,11 +269,8 @@ static Tcl_ChannelType fileChannelType = { NULL, /* flush proc. */ NULL, /* handler proc. */ FileWideSeekProc, /* wide seek proc. */ -#ifdef DEPRECATED - FileThreadActionProc, /* thread actions */ -#else NULL, -#endif + FileTruncateProc, /* truncate proc. */ }; #ifdef SUPPORTS_TTY @@ -339,14 +281,10 @@ static Tcl_ChannelType fileChannelType = { static Tcl_ChannelType ttyChannelType = { "tty", /* Type name. */ - TCL_CHANNEL_VERSION_4, /* v4 channel */ - TtyCloseProc, /* Close proc. */ + TCL_CHANNEL_VERSION_5, /* v5 channel */ + FileCloseProc, /* Close proc. */ FileInputProc, /* Input proc. */ -#if BAD_TIP35_FLUSH - TtyOutputProc, /* Output proc. */ -#else /* !BAD_TIP35_FLUSH */ FileOutputProc, /* Output proc. */ -#endif /* BAD_TIP35_FLUSH */ NULL, /* Seek proc. */ TtySetOptionProc, /* Set option proc. */ TtyGetOptionProc, /* Get option proc. */ @@ -358,6 +296,7 @@ static Tcl_ChannelType ttyChannelType = { NULL, /* handler proc. */ NULL, /* wide seek proc. */ NULL, /* thread action proc. */ + NULL, /* truncate proc. */ }; #endif /* SUPPORTS_TTY */ @@ -368,7 +307,7 @@ static Tcl_ChannelType ttyChannelType = { static Tcl_ChannelType tcpChannelType = { "tcp", /* Type name. */ - TCL_CHANNEL_VERSION_4, /* v4 channel */ + TCL_CHANNEL_VERSION_5, /* v5 channel */ TcpCloseProc, /* Close proc. */ TcpInputProc, /* Input proc. */ TcpOutputProc, /* Output proc. */ @@ -383,16 +322,16 @@ static Tcl_ChannelType tcpChannelType = { NULL, /* handler proc. */ NULL, /* wide seek proc. */ NULL, /* thread action proc. */ + NULL, /* truncate proc. */ }; - /* *---------------------------------------------------------------------- * * FileBlockModeProc -- * - * Helper procedure to set blocking and nonblocking modes on a - * file based channel. Invoked by generic IO level code. + * Helper function to set blocking and nonblocking modes on a file based + * channel. Invoked by generic IO level code. * * Results: * 0 if successful, errno when failed. @@ -405,36 +344,18 @@ static Tcl_ChannelType tcpChannelType = { /* ARGSUSED */ static int -FileBlockModeProc(instanceData, mode) - ClientData instanceData; /* File state. */ - int mode; /* The mode to set. Can be one of - * TCL_MODE_BLOCKING or - * TCL_MODE_NONBLOCKING. */ +FileBlockModeProc( + ClientData instanceData, /* File state. */ + int mode) /* The mode to set. Can be one of + * TCL_MODE_BLOCKING or + * TCL_MODE_NONBLOCKING. */ { FileState *fsPtr = (FileState *) instanceData; - int curStatus; -#ifndef USE_FIONBIO - curStatus = fcntl(fsPtr->fd, F_GETFL); - if (mode == TCL_MODE_BLOCKING) { - curStatus &= (~(O_NONBLOCK)); - } else { - curStatus |= O_NONBLOCK; - } - if (fcntl(fsPtr->fd, F_SETFL, curStatus) < 0) { + if (TclUnixSetBlockingMode(fsPtr->fd, mode) < 0) { return errno; } - curStatus = fcntl(fsPtr->fd, F_GETFL); -#else /* USE_FIONBIO */ - if (mode == TCL_MODE_BLOCKING) { - curStatus = 0; - } else { - curStatus = 1; - } - if (ioctl(fsPtr->fd, (int) FIONBIO, &curStatus) < 0) { - return errno; - } -#endif /* !USE_FIONBIO */ + return 0; } @@ -443,8 +364,8 @@ FileBlockModeProc(instanceData, mode) * * FileInputProc -- * - * This procedure is invoked from the generic IO level to read - * input from a file based channel. + * This function is invoked from the generic IO level to read input from + * a file based channel. * * Results: * The number of bytes read is returned or -1 on error. An output @@ -457,16 +378,16 @@ FileBlockModeProc(instanceData, mode) */ static int -FileInputProc(instanceData, buf, toRead, errorCodePtr) - ClientData instanceData; /* File state. */ - char *buf; /* Where to store data read. */ - int toRead; /* How much space is available - * in the buffer? */ - int *errorCodePtr; /* Where to store error code. */ +FileInputProc( + ClientData instanceData, /* File state. */ + char *buf, /* Where to store data read. */ + int toRead, /* How much space is available in the + * buffer? */ + int *errorCodePtr) /* Where to store error code. */ { FileState *fsPtr = (FileState *) instanceData; - int bytesRead; /* How many bytes were actually - * read from the input device? */ + int bytesRead; /* How many bytes were actually read from the + * input device? */ *errorCodePtr = 0; @@ -490,13 +411,12 @@ FileInputProc(instanceData, buf, toRead, errorCodePtr) * * FileOutputProc-- * - * This procedure is invoked from the generic IO level to write - * output to a file channel. + * This function is invoked from the generic IO level to write output to + * a file channel. * * Results: - * The number of bytes written is returned or -1 on error. An - * output argument contains a POSIX error code if an error occurred, - * or zero. + * The number of bytes written is returned or -1 on error. An output + * argument contains a POSIX error code if an error occurred, or zero. * * Side effects: * Writes output on the output device of the channel. @@ -505,11 +425,11 @@ FileInputProc(instanceData, buf, toRead, errorCodePtr) */ static int -FileOutputProc(instanceData, buf, toWrite, errorCodePtr) - ClientData instanceData; /* File state. */ - CONST char *buf; /* The data buffer. */ - int toWrite; /* How many bytes to write? */ - int *errorCodePtr; /* Where to store error code. */ +FileOutputProc( + ClientData instanceData, /* File state. */ + const char *buf, /* The data buffer. */ + int toWrite, /* How many bytes to write? */ + int *errorCodePtr) /* Where to store error code. */ { FileState *fsPtr = (FileState *) instanceData; int written; @@ -518,9 +438,8 @@ FileOutputProc(instanceData, buf, toWrite, errorCodePtr) if (toWrite == 0) { /* - * SF Tcl Bug 465765. - * Do not try to write nothing into a file. STREAM based - * implementations will considers this as EOF (if there is a + * SF Tcl Bug 465765. Do not try to write nothing into a file. STREAM + * based implementations will considers this as EOF (if there is a * pipe behind the file). */ @@ -539,7 +458,7 @@ FileOutputProc(instanceData, buf, toWrite, errorCodePtr) * * FileCloseProc -- * - * This procedure is called from the generic IO level to perform + * This function is called from the generic IO level to perform * channel-type-specific cleanup when a file based channel is closed. * * Results: @@ -552,16 +471,13 @@ FileOutputProc(instanceData, buf, toWrite, errorCodePtr) */ static int -FileCloseProc(instanceData, interp) - ClientData instanceData; /* File state. */ - Tcl_Interp *interp; /* For error reporting - unused. */ +FileCloseProc( + ClientData instanceData, /* File state. */ + Tcl_Interp *interp) /* For error reporting - unused. */ { FileState *fsPtr = (FileState *) instanceData; int errorCode = 0; -#ifdef DEPRECATED - FileState **nextPtrPtr; - ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); -#endif /* DEPRECATED */ + Tcl_DeleteFileHandler(fsPtr->fd); /* @@ -583,28 +499,27 @@ FileCloseProc(instanceData, interp) * * FileSeekProc -- * - * This procedure is called by the generic IO level to move the - * access point in a file based channel. + * This function is called by the generic IO level to move the access + * point in a file based channel. * * Results: - * -1 if failed, the new position if successful. An output - * argument contains the POSIX error code if an error occurred, - * or zero. + * -1 if failed, the new position if successful. An output argument + * contains the POSIX error code if an error occurred, or zero. * * Side effects: - * Moves the location at which the channel will be accessed in - * future operations. + * Moves the location at which the channel will be accessed in future + * operations. * *---------------------------------------------------------------------- */ static int -FileSeekProc(instanceData, offset, mode, errorCodePtr) - ClientData instanceData; /* File state. */ - long offset; /* Offset to seek to. */ - int mode; /* Relative to where should we seek? Can be +FileSeekProc( + ClientData instanceData, /* File state. */ + long offset, /* Offset to seek to. */ + int mode, /* Relative to where should we seek? Can be * one of SEEK_START, SEEK_SET or SEEK_END. */ - int *errorCodePtr; /* To store error code. */ + int *errorCodePtr) /* To store error code. */ { FileState *fsPtr = (FileState *) instanceData; Tcl_WideInt oldLoc, newLoc; @@ -612,20 +527,23 @@ FileSeekProc(instanceData, offset, mode, errorCodePtr) /* * Save our current place in case we need to roll-back the seek. */ + oldLoc = TclOSseek(fsPtr->fd, (Tcl_SeekOffset) 0, SEEK_CUR); if (oldLoc == Tcl_LongAsWide(-1)) { /* - * Bad things are happening. Error out... + * Bad things are happening. Error out... */ + *errorCodePtr = errno; return -1; } - + newLoc = TclOSseek(fsPtr->fd, (Tcl_SeekOffset) offset, mode); - + /* * Check for expressability in our return type, and roll-back otherwise. */ + if (newLoc > Tcl_LongAsWide(INT_MAX)) { *errorCodePtr = EOVERFLOW; TclOSseek(fsPtr->fd, (Tcl_SeekOffset) oldLoc, SEEK_SET); @@ -641,29 +559,28 @@ FileSeekProc(instanceData, offset, mode, errorCodePtr) * * FileWideSeekProc -- * - * This procedure is called by the generic IO level to move the - * access point in a file based channel, with offsets expressed - * as wide integers. + * This function is called by the generic IO level to move the access + * point in a file based channel, with offsets expressed as wide + * integers. * * Results: - * -1 if failed, the new position if successful. An output - * argument contains the POSIX error code if an error occurred, - * or zero. + * -1 if failed, the new position if successful. An output argument + * contains the POSIX error code if an error occurred, or zero. * * Side effects: - * Moves the location at which the channel will be accessed in - * future operations. + * Moves the location at which the channel will be accessed in future + * operations. * *---------------------------------------------------------------------- */ static Tcl_WideInt -FileWideSeekProc(instanceData, offset, mode, errorCodePtr) - ClientData instanceData; /* File state. */ - Tcl_WideInt offset; /* Offset to seek to. */ - int mode; /* Relative to where should we seek? Can be +FileWideSeekProc( + ClientData instanceData, /* File state. */ + Tcl_WideInt offset, /* Offset to seek to. */ + int mode, /* Relative to where should we seek? Can be * one of SEEK_START, SEEK_CUR or SEEK_END. */ - int *errorCodePtr; /* To store error code. */ + int *errorCodePtr) /* To store error code. */ { FileState *fsPtr = (FileState *) instanceData; Tcl_WideInt newLoc; @@ -692,18 +609,18 @@ FileWideSeekProc(instanceData, offset, mode, errorCodePtr) */ static void -FileWatchProc(instanceData, mask) - ClientData instanceData; /* The file state. */ - int mask; /* Events of interest; an OR-ed - * combination of TCL_READABLE, - * TCL_WRITABLE and TCL_EXCEPTION. */ +FileWatchProc( + ClientData instanceData, /* The file state. */ + int mask) /* Events of interest; an OR-ed combination of + * TCL_READABLE, TCL_WRITABLE and + * TCL_EXCEPTION. */ { FileState *fsPtr = (FileState *) instanceData; /* - * Make sure we only register for events that are valid on this file. - * Note that we are passing Tcl_NotifyChannel directly to - * Tcl_CreateFileHandler with the channel pointer as the client data. + * Make sure we only register for events that are valid on this file. Note + * that we are passing Tcl_NotifyChannel directly to Tcl_CreateFileHandler + * with the channel pointer as the client data. */ mask &= fsPtr->validMask; @@ -721,12 +638,12 @@ FileWatchProc(instanceData, mask) * * FileGetHandleProc -- * - * Called from Tcl_GetChannelHandle to retrieve OS handles from - * a file based channel. + * Called from Tcl_GetChannelHandle to retrieve OS handles from a file + * based channel. * * Results: - * Returns TCL_OK with the fd in handlePtr, or TCL_ERROR if - * there is no handle for the specified direction. + * Returns TCL_OK with the fd in handlePtr, or TCL_ERROR if there is no + * handle for the specified direction. * * Side effects: * None. @@ -735,122 +652,36 @@ FileWatchProc(instanceData, mask) */ static int -FileGetHandleProc(instanceData, direction, handlePtr) - ClientData instanceData; /* The file state. */ - int direction; /* TCL_READABLE or TCL_WRITABLE */ - ClientData *handlePtr; /* Where to store the handle. */ +FileGetHandleProc( + ClientData instanceData, /* The file state. */ + int direction, /* TCL_READABLE or TCL_WRITABLE */ + ClientData *handlePtr) /* Where to store the handle. */ { FileState *fsPtr = (FileState *) instanceData; if (direction & fsPtr->validMask) { - *handlePtr = (ClientData) fsPtr->fd; + *handlePtr = (ClientData) INT2PTR(fsPtr->fd); return TCL_OK; - } else { - return TCL_ERROR; } + return TCL_ERROR; } - -#ifdef SUPPORTS_TTY - -/* - *---------------------------------------------------------------------- - * - * TtyCloseProc -- - * - * This procedure is called from the generic IO level to perform - * channel-type-specific cleanup when a tty based channel is closed. - * - * Results: - * 0 if successful, errno if failed. - * - * Side effects: - * Closes the device of the channel. - * - *---------------------------------------------------------------------- - */ -static int -TtyCloseProc(instanceData, interp) - ClientData instanceData; /* Tty state. */ - Tcl_Interp *interp; /* For error reporting - unused. */ -{ -#if BAD_TIP35_FLUSH - TtyState *ttyPtr = (TtyState *) instanceData; -#endif /* BAD_TIP35_FLUSH */ -#ifdef TTYFLUSH - TTYFLUSH(ttyPtr->fs.fd); -#endif /* TTYFLUSH */ -#if 0 - /* - * TIP#35 agreed to remove the unsave so that TCL could be used as a - * simple stty. - * It would be cleaner to remove all the stuff related to - * TtyState.stateUpdated - * TtyState.savedState - * Then the structure TtyState would be the same as FileState. - * IMO this cleanup could better be done for the final 8.4 release - * after nobody complained about the missing unsave. -- schroedter - */ - if (ttyPtr->stateUpdated) { - SETIOSTATE(ttyPtr->fs.fd, &ttyPtr->savedState); - } -#endif - return FileCloseProc(instanceData, interp); -} - -/* - *---------------------------------------------------------------------- - * - * TtyOutputProc-- - * - * This procedure is invoked from the generic IO level to write - * output to a TTY channel. - * - * Results: - * The number of bytes written is returned or -1 on error. An - * output argument contains a POSIX error code if an error occurred, - * or zero. - * - * Side effects: - * Writes output on the output device of the channel - * if the channel is not designated to be closed. - * - *---------------------------------------------------------------------- - */ - -#if BAD_TIP35_FLUSH -static int -TtyOutputProc(instanceData, buf, toWrite, errorCodePtr) - ClientData instanceData; /* File state. */ - CONST char *buf; /* The data buffer. */ - int toWrite; /* How many bytes to write? */ - int *errorCodePtr; /* Where to store error code. */ -{ - if (TclInExit()) { - /* - * Do not write data during Tcl exit. - * Serial port may block preventing Tcl from exit. - */ - return toWrite; - } else { - return FileOutputProc(instanceData, buf, toWrite, errorCodePtr); - } -} -#endif /* BAD_TIP35_FLUSH */ +#ifdef SUPPORTS_TTY #ifdef USE_TERMIOS /* *---------------------------------------------------------------------- * * TtyModemStatusStr -- * - * Converts a RS232 modem status list of readable flags + * Converts a RS232 modem status list of readable flags * *---------------------------------------------------------------------- */ + static void -TtyModemStatusStr(status, dsPtr) - int status; /* RS232 modem status */ - Tcl_DString *dsPtr; /* Where to store string */ +TtyModemStatusStr( + int status, /* RS232 modem status */ + Tcl_DString *dsPtr) /* Where to store string */ { #ifdef TIOCM_CTS Tcl_DStringAppendElement(dsPtr, "CTS"); @@ -883,25 +714,25 @@ TtyModemStatusStr(status, dsPtr) * interp is not NULL. * * Side effects: - * May modify an option on a device. - * Sets Error message if needed (by calling Tcl_BadChannelOption). + * May modify an option on a device. Sets Error message if needed (by + * calling Tcl_BadChannelOption). * *---------------------------------------------------------------------- */ -static int -TtySetOptionProc(instanceData, interp, optionName, value) - ClientData instanceData; /* File state. */ - Tcl_Interp *interp; /* For error reporting - can be NULL. */ - CONST char *optionName; /* Which option to set? */ - CONST char *value; /* New value for option. */ +static int +TtySetOptionProc( + ClientData instanceData, /* File state. */ + Tcl_Interp *interp, /* For error reporting - can be NULL. */ + const char *optionName, /* Which option to set? */ + const char *value) /* New value for option. */ { FileState *fsPtr = (FileState *) instanceData; unsigned int len, vlen; TtyAttrs tty; #ifdef USE_TERMIOS int flag, control, argc; - CONST char **argv; + const char **argv; IOSTATE iostate; #endif /* USE_TERMIOS */ @@ -916,12 +747,12 @@ TtySetOptionProc(instanceData, interp, optionName, value) &tty.stop) != TCL_OK) { return TCL_ERROR; } + /* - * system calls results should be checked there. -- dl + * system calls results should be checked there. - dl */ TtySetAttributes(fsPtr->fd, &tty); - ((TtyState *) fsPtr)->stateUpdated = 1; return TCL_OK; } @@ -930,23 +761,24 @@ TtySetOptionProc(instanceData, interp, optionName, value) /* * Option -handshake none|xonxoff|rtscts|dtrdsr */ + if ((len > 1) && (strncmp(optionName, "-handshake", len) == 0)) { /* - * Reset all handshake options - * DTR and RTS are ON by default + * Reset all handshake options. DTR and RTS are ON by default. */ + GETIOSTATE(fsPtr->fd, &iostate); - iostate.c_iflag &= ~(IXON | IXOFF | IXANY); + CLEAR_BITS(iostate.c_iflag, IXON | IXOFF | IXANY); #ifdef CRTSCTS - iostate.c_cflag &= ~CRTSCTS; + CLEAR_BITS(iostate.c_cflag, CRTSCTS); #endif /* CRTSCTS */ if (strncasecmp(value, "NONE", vlen) == 0) { /* leave all handshake options disabled */ } else if (strncasecmp(value, "XONXOFF", vlen) == 0) { - iostate.c_iflag |= (IXON | IXOFF | IXANY); + SET_BITS(iostate.c_iflag, IXON | IXOFF | IXANY); } else if (strncasecmp(value, "RTSCTS", vlen) == 0) { #ifdef CRTSCTS - iostate.c_cflag |= CRTSCTS; + SET_BITS(iostate.c_cflag, CRTSCTS); #else /* !CRTSTS */ UNSUPPORTED_OPTION("-handshake RTSCTS"); return TCL_ERROR; @@ -956,9 +788,9 @@ TtySetOptionProc(instanceData, interp, optionName, value) return TCL_ERROR; } else { if (interp) { - Tcl_AppendResult(interp, "bad value for -handshake: ", + Tcl_AppendResult(interp, "bad value for -handshake: " "must be one of xonxoff, rtscts, dtrdsr or none", - (char *) NULL); + NULL); } return TCL_ERROR; } @@ -969,19 +801,27 @@ TtySetOptionProc(instanceData, interp, optionName, value) /* * Option -xchar {\x11 \x13} */ + if ((len > 1) && (strncmp(optionName, "-xchar", len) == 0)) { GETIOSTATE(fsPtr->fd, &iostate); if (Tcl_SplitList(interp, value, &argc, &argv) == TCL_ERROR) { return TCL_ERROR; } if (argc == 2) { - iostate.c_cc[VSTART] = argv[0][0]; - iostate.c_cc[VSTOP] = argv[1][0]; + Tcl_DString ds; + Tcl_DStringInit(&ds); + + Tcl_UtfToExternalDString(NULL, argv[0], -1, &ds); + iostate.c_cc[VSTART] = *(const cc_t *) Tcl_DStringValue(&ds); + Tcl_DStringSetLength(&ds, 0); + + Tcl_UtfToExternalDString(NULL, argv[1], -1, &ds); + iostate.c_cc[VSTOP] = *(const cc_t *) Tcl_DStringValue(&ds); + Tcl_DStringFree(&ds); } else { if (interp) { - Tcl_AppendResult(interp, - "bad value for -xchar: should be a list of two elements", - (char *) NULL); + Tcl_AppendResult(interp, "bad value for -xchar: " + "should be a list of two elements", NULL); } ckfree((char *) argv); return TCL_ERROR; @@ -994,6 +834,7 @@ TtySetOptionProc(instanceData, interp, optionName, value) /* * Option -timeout msec */ + if ((len > 2) && (strncmp(optionName, "-timeout", len) == 0)) { int msec; @@ -1001,8 +842,8 @@ TtySetOptionProc(instanceData, interp, optionName, value) if (Tcl_GetInt(interp, value, &msec) != TCL_OK) { return TCL_ERROR; } - iostate.c_cc[VMIN] = 0; - iostate.c_cc[VTIME] = (msec == 0) ? 0 : (msec < 100) ? 1 : (msec+50)/100; + iostate.c_cc[VMIN] = 0; + iostate.c_cc[VTIME] = (msec==0) ? 0 : (msec<100) ? 1 : (msec+50)/100; SETIOSTATE(fsPtr->fd, &iostate); return TCL_OK; } @@ -1010,16 +851,17 @@ TtySetOptionProc(instanceData, interp, optionName, value) /* * Option -ttycontrol {DTR 1 RTS 0 BREAK 0} */ + if ((len > 4) && (strncmp(optionName, "-ttycontrol", len) == 0)) { int i; + if (Tcl_SplitList(interp, value, &argc, &argv) == TCL_ERROR) { return TCL_ERROR; } if ((argc % 2) == 1) { if (interp) { - Tcl_AppendResult(interp, - "bad value for -ttycontrol: should be a list of", - "signal,value pairs", (char *) NULL); + Tcl_AppendResult(interp, "bad value for -ttycontrol: " + "should be a list of signal,value pairs", NULL); } ckfree((char *) argv); return TCL_ERROR; @@ -1034,9 +876,9 @@ TtySetOptionProc(instanceData, interp, optionName, value) if (strncasecmp(argv[i], "DTR", strlen(argv[i])) == 0) { #ifdef TIOCM_DTR if (flag) { - control |= TIOCM_DTR; + SET_BITS(control, TIOCM_DTR); } else { - control &= ~TIOCM_DTR; + CLEAR_BITS(control, TIOCM_DTR); } #else /* !TIOCM_DTR */ UNSUPPORTED_OPTION("-ttycontrol DTR"); @@ -1046,9 +888,9 @@ TtySetOptionProc(instanceData, interp, optionName, value) } else if (strncasecmp(argv[i], "RTS", strlen(argv[i])) == 0) { #ifdef TIOCM_RTS if (flag) { - control |= TIOCM_RTS; + SET_BITS(control, TIOCM_RTS); } else { - control &= ~TIOCM_RTS; + CLEAR_BITS(control, TIOCM_RTS); } #else /* !TIOCM_RTS*/ UNSUPPORTED_OPTION("-ttycontrol RTS"); @@ -1066,8 +908,8 @@ TtySetOptionProc(instanceData, interp, optionName, value) } else { if (interp) { Tcl_AppendResult(interp, "bad signal \"", argv[i], - "\" for -ttycontrol: must be ", - "DTR, RTS or BREAK", (char *) NULL); + "\" for -ttycontrol: must be " + "DTR, RTS or BREAK", NULL); } ckfree((char *) argv); return TCL_ERROR; @@ -1080,7 +922,7 @@ TtySetOptionProc(instanceData, interp, optionName, value) } return Tcl_BadChannelOption(interp, optionName, - "mode handshake timeout ttycontrol xchar "); + "mode handshake timeout ttycontrol xchar"); #else /* !USE_TERMIOS */ return Tcl_BadChannelOption(interp, optionName, "mode"); @@ -1092,35 +934,34 @@ TtySetOptionProc(instanceData, interp, optionName, value) * * TtyGetOptionProc -- * - * Gets a mode associated with an IO channel. If the optionName arg - * is non NULL, retrieves the value of that option. If the optionName - * arg is NULL, retrieves a list of alternating option names and - * values for the given channel. + * Gets a mode associated with an IO channel. If the optionName arg is + * non-NULL, retrieves the value of that option. If the optionName arg is + * NULL, retrieves a list of alternating option names and values for the + * given channel. * * Results: - * A standard Tcl result. Also sets the supplied DString to the - * string value of the option(s) returned. + * A standard Tcl result. Also sets the supplied DString to the string + * value of the option(s) returned. * * Side effects: - * The string returned by this function is in static storage and - * may be reused at any time subsequent to the call. - * Sets Error message if needed (by calling Tcl_BadChannelOption). + * The string returned by this function is in static storage and may be + * reused at any time subsequent to the call. Sets error message if + * needed (by calling Tcl_BadChannelOption). * *---------------------------------------------------------------------- */ -static int -TtyGetOptionProc(instanceData, interp, optionName, dsPtr) - ClientData instanceData; /* File state. */ - Tcl_Interp *interp; /* For error reporting - can be NULL. */ - CONST char *optionName; /* Option to get. */ - Tcl_DString *dsPtr; /* Where to store value(s). */ +static int +TtyGetOptionProc( + ClientData instanceData, /* File state. */ + Tcl_Interp *interp, /* For error reporting - can be NULL. */ + const char *optionName, /* Option to get. */ + Tcl_DString *dsPtr) /* Where to store value(s). */ { FileState *fsPtr = (FileState *) instanceData; unsigned int len; - char buf[3 * TCL_INTEGER_SPACE + 16]; - TtyAttrs tty; - int valid = 0; /* flag if valid option parsed */ + char buf[3*TCL_INTEGER_SPACE + 16]; + int valid = 0; /* Flag if valid option parsed. */ if (optionName == NULL) { len = 0; @@ -1131,6 +972,8 @@ TtyGetOptionProc(instanceData, interp, optionName, dsPtr) Tcl_DStringAppendElement(dsPtr, "-mode"); } if (len==0 || (len>2 && strncmp(optionName, "-mode", len)==0)) { + TtyAttrs tty; + valid = 1; TtyGetAttributes(fsPtr->fd, &tty); sprintf(buf, "%d,%c,%d,%d", tty.baud, tty.parity, tty.data, tty.stop); @@ -1139,34 +982,42 @@ TtyGetOptionProc(instanceData, interp, optionName, dsPtr) #ifdef USE_TERMIOS /* - * get option -xchar + * Get option -xchar */ + if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-xchar"); Tcl_DStringStartSublist(dsPtr); } if (len==0 || (len>1 && strncmp(optionName, "-xchar", len)==0)) { IOSTATE iostate; + Tcl_DString ds; valid = 1; GETIOSTATE(fsPtr->fd, &iostate); - sprintf(buf, "%c", iostate.c_cc[VSTART]); - Tcl_DStringAppendElement(dsPtr, buf); - sprintf(buf, "%c", iostate.c_cc[VSTOP]); - Tcl_DStringAppendElement(dsPtr, buf); + Tcl_DStringInit(&ds); + + Tcl_ExternalToUtfDString(NULL, (const char *) &iostate.c_cc[VSTART], 1, &ds); + Tcl_DStringAppendElement(dsPtr, (const char *) Tcl_DStringValue(&ds)); + Tcl_DStringSetLength(&ds, 0); + + Tcl_ExternalToUtfDString(NULL, (const char *) &iostate.c_cc[VSTOP], 1, &ds); + Tcl_DStringAppendElement(dsPtr, (const char *) Tcl_DStringValue(&ds)); + Tcl_DStringFree(&ds); } if (len == 0) { Tcl_DStringEndSublist(dsPtr); } /* - * get option -queue - * option is readonly and returned by [fconfigure chan -queue] - * but not returned by unnamed [fconfigure chan] + * Get option -queue + * Option is readonly and returned by [fconfigure chan -queue] but not + * returned by unnamed [fconfigure chan]. */ + if ((len > 1) && (strncmp(optionName, "-queue", len) == 0)) { - int inQueue=0, outQueue=0; - int inBuffered, outBuffered; + int inQueue=0, outQueue=0, inBuffered, outBuffered; + valid = 1; #ifdef GETREADQUEUE GETREADQUEUE(fsPtr->fd, inQueue); @@ -1174,7 +1025,7 @@ TtyGetOptionProc(instanceData, interp, optionName, dsPtr) #ifdef GETWRITEQUEUE GETWRITEQUEUE(fsPtr->fd, outQueue); #endif /* GETWRITEQUEUE */ - inBuffered = Tcl_InputBuffered(fsPtr->channel); + inBuffered = Tcl_InputBuffered(fsPtr->channel); outBuffered = Tcl_OutputBuffered(fsPtr->channel); sprintf(buf, "%d", inBuffered+inQueue); @@ -1184,12 +1035,13 @@ TtyGetOptionProc(instanceData, interp, optionName, dsPtr) } /* - * get option -ttystatus - * option is readonly and returned by [fconfigure chan -ttystatus] - * but not returned by unnamed [fconfigure chan] + * Get option -ttystatus + * Option is readonly and returned by [fconfigure chan -ttystatus] but not + * returned by unnamed [fconfigure chan]. */ if ((len > 4) && (strncmp(optionName, "-ttystatus", len) == 0)) { int status; + valid = 1; GETCONTROL(fsPtr->fd, &status); TtyModemStatusStr(status, dsPtr); @@ -1198,26 +1050,17 @@ TtyGetOptionProc(instanceData, interp, optionName, dsPtr) if (valid) { return TCL_OK; - } else { - return Tcl_BadChannelOption(interp, optionName, + } + return Tcl_BadChannelOption(interp, optionName, "mode" #ifdef USE_TERMIOS - "mode queue ttystatus xchar"); -#else /* !USE_TERMIOS */ - "mode"); + " queue ttystatus xchar" #endif /* USE_TERMIOS */ - } + ); } -#undef DIRECT_BAUD -#ifdef B4800 -# if (B4800 == 4800) -# define DIRECT_BAUD -# endif /* B4800 == 4800 */ -#endif /* B4800 */ - #ifdef DIRECT_BAUD -# define TtyGetSpeed(baud) ((unsigned) (baud)) -# define TtyGetBaud(speed) ((int) (speed)) +# define TtyGetSpeed(baud) ((unsigned) (baud)) +# define TtyGetBaud(speed) ((int) (speed)) #else /* !DIRECT_BAUD */ static CONST struct {int baud; unsigned long speed;} speeds[] = { @@ -1316,9 +1159,9 @@ static CONST struct {int baud; unsigned long speed;} speeds[] = { * * TtyGetSpeed -- * - * Given a baud rate, get the mask value that should be stored in - * the termios, termio, or sgttyb structure in order to select that - * baud rate. + * Given a baud rate, get the mask value that should be stored in the + * termios, termio, or sgttyb structure in order to select that baud + * rate. * * Results: * As above. @@ -1330,8 +1173,8 @@ static CONST struct {int baud; unsigned long speed;} speeds[] = { */ static unsigned long -TtyGetSpeed(baud) - int baud; /* The baud rate to look up. */ +TtyGetSpeed( + int baud) /* The baud rate to look up. */ { int bestIdx, bestDiff, i, diff; @@ -1340,8 +1183,8 @@ TtyGetSpeed(baud) /* * If the baud rate does not correspond to one of the known mask values, - * choose the mask value whose baud rate is closest to the specified - * baud rate. + * choose the mask value whose baud rate is closest to the specified baud + * rate. */ for (i = 0; speeds[i].baud >= 0; i++) { @@ -1362,11 +1205,11 @@ TtyGetSpeed(baud) * * TtyGetBaud -- * - * Given a speed mask value from a termios, termio, or sgttyb - * structure, get the baus rate that corresponds to that mask value. + * Given a speed mask value from a termios, termio, or sgttyb structure, + * get the baus rate that corresponds to that mask value. * * Results: - * As above. If the mask value was not recognized, 0 is returned. + * As above. If the mask value was not recognized, 0 is returned. * * Side effects: * None. @@ -1375,8 +1218,8 @@ TtyGetSpeed(baud) */ static int -TtyGetBaud(speed) - unsigned long speed; /* Speed mask value to look up. */ +TtyGetBaud( + unsigned long speed) /* Speed mask value to look up. */ { int i; @@ -1387,9 +1230,7 @@ TtyGetBaud(speed) } return 0; } - #endif /* !DIRECT_BAUD */ - /* *--------------------------------------------------------------------------- @@ -1408,10 +1249,10 @@ TtyGetBaud(speed) */ static void -TtyGetAttributes(fd, ttyPtr) - int fd; /* Open file descriptor for serial port to - * be queried. */ - TtyAttrs *ttyPtr; /* Buffer filled with serial port +TtyGetAttributes( + int fd, /* Open file descriptor for serial port to be + * queried. */ + TtyAttrs *ttyPtr) /* Buffer filled with serial port * attributes. */ { IOSTATE iostate; @@ -1425,15 +1266,15 @@ TtyGetAttributes(fd, ttyPtr) parity = 'n'; #ifdef PAREXT switch ((int) (iostate.c_cflag & (PARENB | PARODD | PAREXT))) { - case PARENB : parity = 'e'; break; - case PARENB | PARODD : parity = 'o'; break; - case PARENB | PAREXT : parity = 's'; break; - case PARENB | PARODD | PAREXT : parity = 'm'; break; + case PARENB : parity = 'e'; break; + case PARENB | PARODD : parity = 'o'; break; + case PARENB | PAREXT : parity = 's'; break; + case PARENB | PARODD | PAREXT : parity = 'm'; break; } #else /* !PAREXT */ switch ((int) (iostate.c_cflag & (PARENB | PARODD))) { - case PARENB : parity = 'e'; break; - case PARENB | PARODD : parity = 'o'; break; + case PARENB : parity = 'e'; break; + case PARENB | PARODD : parity = 'o'; break; } #endif /* !PAREXT */ @@ -1448,10 +1289,10 @@ TtyGetAttributes(fd, ttyPtr) parity = 'n'; switch (iostate.c_cflag & (PARENB | PARODD | PAREXT)) { - case PARENB : parity = 'e'; break; - case PARENB | PARODD : parity = 'o'; break; - case PARENB | PAREXT : parity = 's'; break; - case PARENB | PARODD | PAREXT : parity = 'm'; break; + case PARENB : parity = 'e'; break; + case PARENB | PARODD : parity = 'o'; break; + case PARENB | PAREXT : parity = 's'; break; + case PARENB | PARODD | PAREXT : parity = 'm'; break; } data = iostate.c_cflag & CSIZE; @@ -1486,7 +1327,7 @@ TtyGetAttributes(fd, ttyPtr) * * TtySetAttributes -- * - * Set the current attributes of the specified serial device. + * Set the current attributes of the specified serial device. * * Results: * None. @@ -1498,11 +1339,11 @@ TtyGetAttributes(fd, ttyPtr) */ static void -TtySetAttributes(fd, ttyPtr) - int fd; /* Open file descriptor for serial port to - * be modified. */ - TtyAttrs *ttyPtr; /* Buffer containing new attributes for - * serial port. */ +TtySetAttributes( + int fd, /* Open file descriptor for serial port to be + * modified. */ + TtyAttrs *ttyPtr) /* Buffer containing new attributes for serial + * port. */ { IOSTATE iostate; @@ -1516,25 +1357,28 @@ TtySetAttributes(fd, ttyPtr) flag = 0; parity = ttyPtr->parity; if (parity != 'n') { - flag |= PARENB; + SET_BITS(flag, PARENB); #ifdef PAREXT - iostate.c_cflag &= ~PAREXT; + CLEAR_BITS(iostate.c_cflag, PAREXT); if ((parity == 'm') || (parity == 's')) { - flag |= PAREXT; + SET_BITS(flag, PAREXT); } #endif /* PAREXT */ if ((parity == 'm') || (parity == 'o')) { - flag |= PARODD; + SET_BITS(flag, PARODD); } } data = ttyPtr->data; - flag |= (data == 5) ? CS5 : (data == 6) ? CS6 : (data == 7) ? CS7 : CS8; + SET_BITS(flag, + (data == 5) ? CS5 : + (data == 6) ? CS6 : + (data == 7) ? CS7 : CS8); if (ttyPtr->stop == 2) { - flag |= CSTOPB; + SET_BITS(flag, CSTOPB); } - iostate.c_cflag &= ~(PARENB | PARODD | CSIZE | CSTOPB); - iostate.c_cflag |= flag; + CLEAR_BITS(iostate.c_cflag, PARENB | PARODD | CSIZE | CSTOPB); + SET_BITS(iostate.c_cflag, flag); #endif /* USE_TERMIOS */ @@ -1542,28 +1386,31 @@ TtySetAttributes(fd, ttyPtr) int parity, data, flag; GETIOSTATE(fd, &iostate); - iostate.c_cflag &= ~CBAUD; - iostate.c_cflag |= TtyGetSpeed(ttyPtr->baud); + CLEAR_BITS(iostate.c_cflag, CBAUD); + SET_BITS(iostate.c_cflag, TtyGetSpeed(ttyPtr->baud)); flag = 0; parity = ttyPtr->parity; if (parity != 'n') { - flag |= PARENB; + SET_BITS(flag, PARENB); if ((parity == 'm') || (parity == 's')) { - flag |= PAREXT; + SET_BITS(flag, PAREXT); } if ((parity == 'm') || (parity == 'o')) { - flag |= PARODD; + SET_BITS(flag, PARODD); } } data = ttyPtr->data; - flag |= (data == 5) ? CS5 : (data == 6) ? CS6 : (data == 7) ? CS7 : CS8; + SET_BITS(flag, + (data == 5) ? CS5 : + (data == 6) ? CS6 : + (data == 7) ? CS7 : CS8); if (ttyPtr->stop == 2) { - flag |= CSTOPB; + SET_BITS(flag, CSTOPB); } - iostate.c_cflag &= ~(PARENB | PARODD | PAREXT | CSIZE | CSTOPB); - iostate.c_cflag |= flag; + CLEAR_BITS(iostate.c_cflag, PARENB | PARODD | PAREXT | CSIZE | CSTOPB); + SET_BITS(iostate.c_cflag, flag); #endif /* USE_TERMIO */ @@ -1576,11 +1423,11 @@ TtySetAttributes(fd, ttyPtr) parity = ttyPtr->parity; if (parity == 'e') { - iostate.sg_flags &= ~ODDP; - iostate.sg_flags |= EVENP; + CLEAR_BITS(iostate.sg_flags, ODDP); + SET_BITS(iostate.sg_flags, EVENP); } else if (parity == 'o') { - iostate.sg_flags &= ~EVENP; - iostate.sg_flags |= ODDP; + CLEAR_BITS(iostate.sg_flags, EVENP); + SET_BITS(iostate.sg_flags, ODDP); } #endif /* USE_SGTTY */ @@ -1592,13 +1439,13 @@ TtySetAttributes(fd, ttyPtr) * * TtyParseMode -- * - * Parse the "-mode" argument to the fconfigure command. The argument - * is of the form baud,parity,data,stop. + * Parse the "-mode" argument to the fconfigure command. The argument is + * of the form baud,parity,data,stop. * * Results: - * The return value is TCL_OK if the argument was successfully - * parsed, TCL_ERROR otherwise. If TCL_ERROR is returned, an - * error message is left in the interp's result (if interp is non-NULL). + * The return value is TCL_OK if the argument was successfully parsed, + * TCL_ERROR otherwise. If TCL_ERROR is returned, an error message is + * left in the interp's result (if interp is non-NULL). * * Side effects: * None. @@ -1607,17 +1454,17 @@ TtySetAttributes(fd, ttyPtr) */ static int -TtyParseMode(interp, mode, speedPtr, parityPtr, dataPtr, stopPtr) - Tcl_Interp *interp; /* If non-NULL, interp for error return. */ - CONST char *mode; /* Mode string to be parsed. */ - int *speedPtr; /* Filled with baud rate from mode string. */ - int *parityPtr; /* Filled with parity from mode string. */ - int *dataPtr; /* Filled with data bits from mode string. */ - int *stopPtr; /* Filled with stop bits from mode string. */ +TtyParseMode( + Tcl_Interp *interp, /* If non-NULL, interp for error return. */ + const char *mode, /* Mode string to be parsed. */ + int *speedPtr, /* Filled with baud rate from mode string. */ + int *parityPtr, /* Filled with parity from mode string. */ + int *dataPtr, /* Filled with data bits from mode string. */ + int *stopPtr) /* Filled with stop bits from mode string. */ { int i, end; char parity; - static char *bad = "bad value for -mode"; + static const char *bad = "bad value for -mode"; i = sscanf(mode, "%d,%c,%d,%d%n", speedPtr, &parity, dataPtr, stopPtr, &end); @@ -1628,24 +1475,23 @@ TtyParseMode(interp, mode, speedPtr, parityPtr, dataPtr, stopPtr) } return TCL_ERROR; } + /* - * Only allow setting mark/space parity on platforms that support it - * Make sure to allow for the case where strchr is a macro. - * [Bug: 5089] + * Only allow setting mark/space parity on platforms that support it Make + * sure to allow for the case where strchr is a macro. [Bug: 5089] */ - if ( + #if defined(PAREXT) || defined(USE_TERMIO) - strchr("noems", parity) == NULL + if (strchr("noems", parity) == NULL) { #else - strchr("noe", parity) == NULL + if (strchr("noe", parity) == NULL) { #endif /* PAREXT|USE_TERMIO */ - ) { if (interp != NULL) { - Tcl_AppendResult(interp, bad, + Tcl_AppendResult(interp, bad, " parity: should be ", #if defined(PAREXT) || defined(USE_TERMIO) - " parity: should be n, o, e, m, or s", + "n, o, e, m, or s", #else - " parity: should be n, o, or e", + "n, o, or e", #endif /* PAREXT|USE_TERMIO */ NULL); } @@ -1673,36 +1519,35 @@ TtyParseMode(interp, mode, speedPtr, parityPtr, dataPtr, stopPtr) * * TtyInit -- * - * Given file descriptor that refers to a serial port, - * initialize the serial port to a set of sane values so that - * Tcl can talk to a device located on the serial port. - * Note that no initialization happens if the initialize flag - * is not set; this is necessary for the correct handling of - * UNIX console TTYs at startup. + * Given file descriptor that refers to a serial port, initialize the + * serial port to a set of sane values so that Tcl can talk to a device + * located on the serial port. Note that no initialization happens if the + * initialize flag is not set; this is necessary for the correct handling + * of UNIX console TTYs at startup. * * Results: - * A pointer to a FileState suitable for use with Tcl_CreateChannel - * and the ttyChannelType structure. + * A pointer to a FileState suitable for use with Tcl_CreateChannel and + * the ttyChannelType structure. * * Side effects: - * Serial device initialized to non-blocking raw mode, similar to - * sockets (if initialize flag is non-zero.) All other modes can - * be simulated on top of this in Tcl. + * Serial device initialized to non-blocking raw mode, similar to sockets + * (if initialize flag is non-zero.) All other modes can be simulated on + * top of this in Tcl. * *--------------------------------------------------------------------------- */ static FileState * -TtyInit(fd, initialize) - int fd; /* Open file descriptor for serial port to - * be initialized. */ - int initialize; +TtyInit( + int fd, /* Open file descriptor for serial port to be + * initialized. */ + int initialize) { TtyState *ttyPtr; + int stateUpdated = 0; ttyPtr = (TtyState *) ckalloc((unsigned) sizeof(TtyState)); GETIOSTATE(fd, &ttyPtr->savedState); - ttyPtr->stateUpdated = 0; if (initialize) { IOSTATE iostate = ttyPtr->savedState; @@ -1713,12 +1558,12 @@ TtyInit(fd, initialize) iostate.c_cflag & CREAD || iostate.c_cc[VMIN] != 1 || iostate.c_cc[VTIME] != 0) { - ttyPtr->stateUpdated = 1; + stateUpdated = 1; } iostate.c_iflag = IGNBRK; iostate.c_oflag = 0; iostate.c_lflag = 0; - iostate.c_cflag |= CREAD; + SET_BITS(iostate.c_cflag, CREAD); iostate.c_cc[VMIN] = 1; iostate.c_cc[VTIME] = 0; #endif /* USE_TERMIOS|USE_TERMIO */ @@ -1728,15 +1573,15 @@ TtyInit(fd, initialize) !(iostate.sg_flags & RAW)) { ttyPtr->stateUpdated = 1; } - iostate.sg_flags &= (EVENP | ODDP); - iostate.sg_flags |= RAW; + iostate.sg_flags &= EVENP | ODDP; + SET_BITS(iostate.sg_flags, RAW); #endif /* USE_SGTTY */ /* - * Only update if we're changing anything to avoid possible - * blocking. + * Only update if we're changing anything to avoid possible blocking. */ - if (ttyPtr->stateUpdated) { + + if (stateUpdated) { SETIOSTATE(fd, &iostate); } } @@ -1753,71 +1598,66 @@ TtyInit(fd, initialize) * Open an file based channel on Unix systems. * * Results: - * The new channel or NULL. If NULL, the output argument - * errorCodePtr is set to a POSIX error and an error message is - * left in the interp's result if interp is not NULL. + * The new channel or NULL. If NULL, the output argument errorCodePtr is + * set to a POSIX error and an error message is left in the interp's + * result if interp is not NULL. * * Side effects: - * May open the channel and may cause creation of a file on the - * file system. + * May open the channel and may cause creation of a file on the file + * system. * *---------------------------------------------------------------------- */ Tcl_Channel -TclpOpenFileChannel(interp, pathPtr, mode, permissions) - Tcl_Interp *interp; /* Interpreter for error reporting; - * can be NULL. */ - Tcl_Obj *pathPtr; /* Name of file to open. */ - int mode; /* POSIX open mode. */ - int permissions; /* If the open involves creating a - * file, with what modes to create - * it? */ +TclpOpenFileChannel( + Tcl_Interp *interp, /* Interpreter for error reporting; can be + * NULL. */ + Tcl_Obj *pathPtr, /* Name of file to open. */ + int mode, /* POSIX open mode. */ + int permissions) /* If the open involves creating a file, with + * what modes to create it? */ { int fd, channelPermissions; FileState *fsPtr; - CONST char *native, *translation; + const char *native, *translation; char channelName[16 + TCL_INTEGER_SPACE]; Tcl_ChannelType *channelTypePtr; -#ifdef SUPPORTS_TTY - int ctl_tty; -#endif /* SUPPORTS_TTY */ -#ifdef DEPRECATED - ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); -#endif /* DEPRECATED */ switch (mode & (O_RDONLY | O_WRONLY | O_RDWR)) { - case O_RDONLY: - channelPermissions = TCL_READABLE; - break; - case O_WRONLY: - channelPermissions = TCL_WRITABLE; - break; - case O_RDWR: - channelPermissions = (TCL_READABLE | TCL_WRITABLE); - break; - default: - /* - * This may occurr if modeString was "", for example. - */ - panic("TclpOpenFileChannel: invalid mode value"); - return NULL; + case O_RDONLY: + channelPermissions = TCL_READABLE; + break; + case O_WRONLY: + channelPermissions = TCL_WRITABLE; + break; + case O_RDWR: + channelPermissions = (TCL_READABLE | TCL_WRITABLE); + break; + default: + /* + * This may occurr if modeString was "", for example. + */ + + Tcl_Panic("TclpOpenFileChannel: invalid mode value"); + return NULL; } native = Tcl_FSGetNativePath(pathPtr); if (native == NULL) { return NULL; } + +#ifdef DJGPP + SET_BITS(mode, O_BINARY); +#endif + fd = TclOSopen(native, mode, permissions); -#ifdef SUPPORTS_TTY - ctl_tty = (strcmp (native, "/dev/tty") == 0); -#endif /* SUPPORTS_TTY */ if (fd < 0) { - if (interp != (Tcl_Interp *) NULL) { - Tcl_AppendResult(interp, "couldn't open \"", - Tcl_GetString(pathPtr), "\": ", - Tcl_PosixError(interp), (char *) NULL); + if (interp != NULL) { + Tcl_AppendResult(interp, "couldn't open \"", TclGetString(pathPtr), + "\": ", Tcl_PosixError(interp), NULL); } return NULL; } @@ -1832,19 +1672,25 @@ TclpOpenFileChannel(interp, pathPtr, mode, permissions) sprintf(channelName, "file%d", fd); #ifdef SUPPORTS_TTY - if (!ctl_tty && isatty(fd)) { + if (strcmp(native, "/dev/tty") != 0 && isatty(fd)) { /* - * Initialize the serial port to a set of sane parameters. - * Especially important if the remote device is set to echo and - * the serial port driver was also set to echo -- as soon as a char - * were sent to the serial port, the remote device would echo it, - * then the serial driver would echo it back to the device, etc. + * Initialize the serial port to a set of sane parameters. Especially + * important if the remote device is set to echo and the serial port + * driver was also set to echo -- as soon as a char were sent to the + * serial port, the remote device would echo it, then the serial + * driver would echo it back to the device, etc. + * + * Note that we do not do this if we're dealing with /dev/tty itself, + * as that tends to cause Bad Things To Happen when you're working + * interactively. Strictly a better check would be to see if the FD + * being set up is a device and has the same major/minor as the + * initial std FDs (beware reopening!) but that's nearly as messy. */ translation = "auto crlf"; channelTypePtr = &ttyChannelType; fsPtr = TtyInit(fd, 1); - } else + } else #endif /* SUPPORTS_TTY */ { translation = NULL; @@ -1852,15 +1698,6 @@ TclpOpenFileChannel(interp, pathPtr, mode, permissions) fsPtr = (FileState *) ckalloc((unsigned) sizeof(FileState)); } -#ifdef DEPRECATED - if (channelTypePtr == &fileChannelType) { - /* TIP #218. Removed the code inserting the new structure - * into the global list. This is now handled in the thread - * action callbacks, and only there. - */ - fsPtr->nextPtr = NULL; - } -#endif /* DEPRECATED */ fsPtr->validMask = channelPermissions | TCL_EXCEPTION; fsPtr->fd = fd; @@ -1869,11 +1706,11 @@ TclpOpenFileChannel(interp, pathPtr, mode, permissions) if (translation != NULL) { /* - * Gotcha. Most modems need a "\r" at the end of the command - * sequence. If you just send "at\n", the modem will not respond - * with "OK" because it never got a "\r" to actually invoke the - * command. So, by default, newlines are translated to "\r\n" on - * output to avoid "bug" reports that the serial port isn't working. + * Gotcha. Most modems need a "\r" at the end of the command sequence. + * If you just send "at\n", the modem will not respond with "OK" + * because it never got a "\r" to actually invoke the command. So, by + * default, newlines are translated to "\r\n" on output to avoid "bug" + * reports that the serial port isn't working. */ if (Tcl_SetChannelOption(interp, fsPtr->channel, "-translation", @@ -1903,18 +1740,15 @@ TclpOpenFileChannel(interp, pathPtr, mode, permissions) */ Tcl_Channel -Tcl_MakeFileChannel(handle, mode) - ClientData handle; /* OS level handle. */ - int mode; /* ORed combination of TCL_READABLE and +Tcl_MakeFileChannel( + ClientData handle, /* OS level handle. */ + int mode) /* ORed combination of TCL_READABLE and * TCL_WRITABLE to indicate file mode. */ { FileState *fsPtr; char channelName[16 + TCL_INTEGER_SPACE]; - int fd = (int) handle; + int fd = PTR2INT(handle); Tcl_ChannelType *channelTypePtr; -#ifdef DEPRECATED - ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); -#endif /* DEPRECATED */ struct sockaddr sockaddr; socklen_t sockaddrLen = sizeof(sockaddr); @@ -1922,21 +1756,6 @@ Tcl_MakeFileChannel(handle, mode) return NULL; } - - /* - * Look to see if a channel with this fd and the same mode already exists. - * If the fd is used, but the mode doesn't match, return NULL. - */ - -#ifdef DEPRECATED - for (fsPtr = tsdPtr->firstFilePtr; fsPtr != NULL; fsPtr = fsPtr->nextPtr) { - if (fsPtr->fd == fd) { - return ((mode|TCL_EXCEPTION) == fsPtr->validMask) ? - fsPtr->channel : NULL; - } - } -#endif /* DEPRECATED */ - sockaddr.sa_family = AF_UNSPEC; #ifdef SUPPORTS_TTY @@ -1947,21 +1766,15 @@ Tcl_MakeFileChannel(handle, mode) } else #endif /* SUPPORTS_TTY */ if (getsockname(fd, (struct sockaddr *)&sockaddr, &sockaddrLen) == 0 - && sockaddrLen > 0 - && sockaddr.sa_family == AF_INET) { - return MakeTcpClientChannelMode((ClientData) fd, mode); + && sockaddrLen > 0 + && sockaddr.sa_family == AF_INET) { + return MakeTcpClientChannelMode((ClientData) INT2PTR(fd), mode); } else { - channelTypePtr = &fileChannelType; - fsPtr = (FileState *) ckalloc((unsigned) sizeof(FileState)); - sprintf(channelName, "file%d", fd); + channelTypePtr = &fileChannelType; + fsPtr = (FileState *) ckalloc((unsigned) sizeof(FileState)); + sprintf(channelName, "file%d", fd); } -#ifdef DEPRECATED - if (channelTypePtr == &fileChannelType) { - fsPtr->nextPtr = tsdPtr->firstFilePtr; - tsdPtr->firstFilePtr = fsPtr; - } -#endif /* DEPRECATED */ fsPtr->fd = fd; fsPtr->validMask = mode | TCL_EXCEPTION; fsPtr->channel = Tcl_CreateChannel(channelTypePtr, channelName, @@ -1975,8 +1788,8 @@ Tcl_MakeFileChannel(handle, mode) * * TcpBlockModeProc -- * - * This procedure is invoked by the generic IO level to set blocking - * and nonblocking mode on a TCP socket based channel. + * This function is invoked by the generic IO level to set blocking and + * nonblocking mode on a TCP socket based channel. * * Results: * 0 if successful, errno when failed. @@ -1989,43 +1802,22 @@ Tcl_MakeFileChannel(handle, mode) /* ARGSUSED */ static int -TcpBlockModeProc(instanceData, mode) - ClientData instanceData; /* Socket state. */ - int mode; /* The mode to set. Can be one of - * TCL_MODE_BLOCKING or - * TCL_MODE_NONBLOCKING. */ +TcpBlockModeProc( + ClientData instanceData, /* Socket state. */ + int mode) /* The mode to set. Can be one of + * TCL_MODE_BLOCKING or + * TCL_MODE_NONBLOCKING. */ { TcpState *statePtr = (TcpState *) instanceData; - int setting; -#ifndef USE_FIONBIO - setting = fcntl(statePtr->fd, F_GETFL); if (mode == TCL_MODE_BLOCKING) { - statePtr->flags &= (~(TCP_ASYNC_SOCKET)); - setting &= (~(O_NONBLOCK)); + CLEAR_BITS(statePtr->flags, TCP_ASYNC_SOCKET); } else { - statePtr->flags |= TCP_ASYNC_SOCKET; - setting |= O_NONBLOCK; + SET_BITS(statePtr->flags, TCP_ASYNC_SOCKET); } - if (fcntl(statePtr->fd, F_SETFL, setting) < 0) { + if (TclUnixSetBlockingMode(statePtr->fd, mode) < 0) { return errno; } -#else /* USE_FIONBIO */ - if (mode == TCL_MODE_BLOCKING) { - statePtr->flags &= (~(TCP_ASYNC_SOCKET)); - setting = 0; - if (ioctl(statePtr->fd, (int) FIONBIO, &setting) == -1) { - return errno; - } - } else { - statePtr->flags |= TCP_ASYNC_SOCKET; - setting = 1; - if (ioctl(statePtr->fd, (int) FIONBIO, &setting) == -1) { - return errno; - } - } -#endif /* !USE_FIONBIO */ - return 0; } @@ -2034,8 +1826,8 @@ TcpBlockModeProc(instanceData, mode) * * WaitForConnect -- * - * Waits for a connection on an asynchronously opened socket to - * be completed. + * Waits for a connection on an asynchronously opened socket to be + * completed. * * Results: * None. @@ -2047,17 +1839,16 @@ TcpBlockModeProc(instanceData, mode) */ static int -WaitForConnect(statePtr, errorCodePtr) - TcpState *statePtr; /* State of the socket. */ - int *errorCodePtr; /* Where to store errors? */ +WaitForConnect( + TcpState *statePtr, /* State of the socket. */ + int *errorCodePtr) /* Where to store errors? */ { int timeOut; /* How long to wait. */ int state; /* Of calling TclWaitForFile. */ - int flags; /* fcntl flags for the socket. */ /* - * If an asynchronous connect is in progress, attempt to wait for it - * to complete before reading. + * If an asynchronous connect is in progress, attempt to wait for it to + * complete before reading. */ if (statePtr->flags & TCP_ASYNC_CONNECT) { @@ -2070,20 +1861,13 @@ WaitForConnect(statePtr, errorCodePtr) state = TclUnixWaitForFile(statePtr->fd, TCL_WRITABLE | TCL_EXCEPTION, timeOut); if (!(statePtr->flags & TCP_ASYNC_SOCKET)) { -#ifndef USE_FIONBIO - flags = fcntl(statePtr->fd, F_GETFL); - flags &= (~(O_NONBLOCK)); - (void) fcntl(statePtr->fd, F_SETFL, flags); -#else /* USE_FIONBIO */ - flags = 0; - (void) ioctl(statePtr->fd, FIONBIO, &flags); -#endif /* !USE_FIONBIO */ + (void) TclUnixSetBlockingMode(statePtr->fd, TCL_MODE_BLOCKING); } if (state & TCL_EXCEPTION) { return -1; } if (state & TCL_WRITABLE) { - statePtr->flags &= (~(TCP_ASYNC_CONNECT)); + CLEAR_BITS(statePtr->flags, TCP_ASYNC_CONNECT); } else if (timeOut == 0) { *errorCodePtr = errno = EWOULDBLOCK; return -1; @@ -2097,16 +1881,16 @@ WaitForConnect(statePtr, errorCodePtr) * * TcpInputProc -- * - * This procedure is invoked by the generic IO level to read input - * from a TCP socket based channel. + * This function is invoked by the generic IO level to read input from a + * TCP socket based channel. * - * NOTE: We cannot share code with FilePipeInputProc because here - * we must use recv to obtain the input from the channel, not read. + * NOTE: We cannot share code with FilePipeInputProc because here we must + * use recv to obtain the input from the channel, not read. * * Results: * The number of bytes read is returned or -1 on error. An output - * argument contains the POSIX error code on error, or zero if no - * error occurred. + * argument contains the POSIX error code on error, or zero if no error + * occurred. * * Side effects: * Reads input from the input device of the channel. @@ -2116,12 +1900,12 @@ WaitForConnect(statePtr, errorCodePtr) /* ARGSUSED */ static int -TcpInputProc(instanceData, buf, bufSize, errorCodePtr) - ClientData instanceData; /* Socket state. */ - char *buf; /* Where to store data read. */ - int bufSize; /* How much space is available - * in the buffer? */ - int *errorCodePtr; /* Where to store error code. */ +TcpInputProc( + ClientData instanceData, /* Socket state. */ + char *buf, /* Where to store data read. */ + int bufSize, /* How much space is available in the + * buffer? */ + int *errorCodePtr) /* Where to store error code. */ { TcpState *statePtr = (TcpState *) instanceData; int bytesRead, state; @@ -2151,15 +1935,15 @@ TcpInputProc(instanceData, buf, bufSize, errorCodePtr) * * TcpOutputProc -- * - * This procedure is invoked by the generic IO level to write output - * to a TCP socket based channel. + * This function is invoked by the generic IO level to write output to a + * TCP socket based channel. * - * NOTE: We cannot share code with FilePipeOutputProc because here - * we must use send, not write, to get reliable error reporting. + * NOTE: We cannot share code with FilePipeOutputProc because here we + * must use send, not write, to get reliable error reporting. * * Results: - * The number of bytes written is returned. An output argument is - * set to a POSIX error code if an error occurred, or zero. + * The number of bytes written is returned. An output argument is set to + * a POSIX error code if an error occurred, or zero. * * Side effects: * Writes output on the output device of the channel. @@ -2168,11 +1952,11 @@ TcpInputProc(instanceData, buf, bufSize, errorCodePtr) */ static int -TcpOutputProc(instanceData, buf, toWrite, errorCodePtr) - ClientData instanceData; /* Socket state. */ - CONST char *buf; /* The data buffer. */ - int toWrite; /* How many bytes to write? */ - int *errorCodePtr; /* Where to store error code. */ +TcpOutputProc( + ClientData instanceData, /* Socket state. */ + const char *buf, /* The data buffer. */ + int toWrite, /* How many bytes to write? */ + int *errorCodePtr) /* Where to store error code. */ { TcpState *statePtr = (TcpState *) instanceData; int written; @@ -2196,9 +1980,9 @@ TcpOutputProc(instanceData, buf, toWrite, errorCodePtr) * * TcpCloseProc -- * - * This procedure is invoked by the generic IO level to perform - * channel-type-specific cleanup when a TCP socket based channel - * is closed. + * This function is invoked by the generic IO level to perform + * channel-type-specific cleanup when a TCP socket based channel is + * closed. * * Results: * 0 if successful, the value of errno if failed. @@ -2211,20 +1995,19 @@ TcpOutputProc(instanceData, buf, toWrite, errorCodePtr) /* ARGSUSED */ static int -TcpCloseProc(instanceData, interp) - ClientData instanceData; /* The socket to close. */ - Tcl_Interp *interp; /* For error reporting - unused. */ +TcpCloseProc( + ClientData instanceData, /* The socket to close. */ + Tcl_Interp *interp) /* For error reporting - unused. */ { TcpState *statePtr = (TcpState *) instanceData; int errorCode = 0; /* - * Delete a file handler that may be active for this socket if this - * is a server socket - the file handler was created automatically - * by Tcl as part of the mechanism to accept new client connections. - * Channel handlers are already deleted in the generic IO channel - * closing code that called this function, so we do not have to - * delete them here. + * Delete a file handler that may be active for this socket if this is a + * server socket - the file handler was created automatically by Tcl as + * part of the mechanism to accept new client connections. Channel + * handlers are already deleted in the generic IO channel closing code + * that called this function, so we do not have to delete them here. */ Tcl_DeleteFileHandler(statePtr->fd); @@ -2242,15 +2025,15 @@ TcpCloseProc(instanceData, interp) * * TcpGetOptionProc -- * - * Computes an option value for a TCP socket based channel, or a - * list of all options and their values. + * Computes an option value for a TCP socket based channel, or a list of + * all options and their values. * * Note: This code is based on code contributed by John Haxby. * * Results: - * A standard Tcl result. The value of the specified option or a - * list of all options and their values is returned in the - * supplied DString. Sets Error message if needed. + * A standard Tcl result. The value of the specified option or a list of + * all options and their values is returned in the supplied DString. Sets + * Error message if needed. * * Side effects: * None. @@ -2259,15 +2042,14 @@ TcpCloseProc(instanceData, interp) */ static int -TcpGetOptionProc(instanceData, interp, optionName, dsPtr) - ClientData instanceData; /* Socket state. */ - Tcl_Interp *interp; /* For error reporting - can be NULL. */ - CONST char *optionName; /* Name of the option to - * retrieve the value for, or - * NULL to get all options and - * their values. */ - Tcl_DString *dsPtr; /* Where to store the computed - * value; initialized by caller. */ +TcpGetOptionProc( + ClientData instanceData, /* Socket state. */ + Tcl_Interp *interp, /* For error reporting - can be NULL. */ + const char *optionName, /* Name of the option to retrieve the value + * for, or NULL to get all options and their + * values. */ + Tcl_DString *dsPtr) /* Where to store the computed value; + * initialized by caller. */ { TcpState *statePtr = (TcpState *) instanceData; struct sockaddr_in sockname; @@ -2277,7 +2059,7 @@ TcpGetOptionProc(instanceData, interp, optionName, dsPtr) size_t len = 0; char buf[TCL_INTEGER_SPACE]; - if (optionName != (char *) NULL) { + if (optionName != NULL) { len = strlen(optionName); } @@ -2310,7 +2092,7 @@ TcpGetOptionProc(instanceData, interp, optionName, dsPtr) hostEntPtr = TclpGetHostByAddr( /* INTL: Native. */ (char *) &peername.sin_addr, sizeof(peername.sin_addr), AF_INET); - if (hostEntPtr != (struct hostent *) NULL) { + if (hostEntPtr != NULL) { Tcl_DString ds; Tcl_ExternalToUtfDString(NULL, hostEntPtr->h_name, -1, &ds); @@ -2329,15 +2111,15 @@ TcpGetOptionProc(instanceData, interp, optionName, dsPtr) } else { /* * getpeername failed - but if we were asked for all the options - * (len==0), don't flag an error at that point because it could - * be an fconfigure request on a server socket. (which have - * no peer). same must be done on win&mac. + * (len==0), don't flag an error at that point because it could be + * an fconfigure request on a server socket (which have no peer). + * Same must be done on win&mac. */ if (len) { if (interp) { Tcl_AppendResult(interp, "can't get peername: ", - Tcl_PosixError(interp), (char *) NULL); + Tcl_PosixError(interp), NULL); } return TCL_ERROR; } @@ -2348,7 +2130,7 @@ TcpGetOptionProc(instanceData, interp, optionName, dsPtr) ((len > 1) && (optionName[1] == 's') && (strncmp(optionName, "-sockname", len) == 0))) { if (getsockname(statePtr->fd, (struct sockaddr *) &sockname, - &size) >= 0) { + &size) >= 0) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-sockname"); Tcl_DStringStartSublist(dsPtr); @@ -2366,9 +2148,9 @@ TcpGetOptionProc(instanceData, interp, optionName, dsPtr) (char *) &sockname.sin_addr, sizeof(sockname.sin_addr), AF_INET); } - if (hostEntPtr != (struct hostent *) NULL) { + if (hostEntPtr != NULL) { Tcl_DString ds; - + Tcl_ExternalToUtfDString(NULL, hostEntPtr->h_name, -1, &ds); Tcl_DStringAppendElement(dsPtr, Tcl_DStringValue(&ds)); Tcl_DStringFree(&ds); @@ -2385,7 +2167,7 @@ TcpGetOptionProc(instanceData, interp, optionName, dsPtr) } else { if (interp) { Tcl_AppendResult(interp, "can't get sockname: ", - Tcl_PosixError(interp), (char *) NULL); + Tcl_PosixError(interp), NULL); } return TCL_ERROR; } @@ -2409,25 +2191,25 @@ TcpGetOptionProc(instanceData, interp, optionName, dsPtr) * None. * * Side effects: - * Sets up the notifier so that a future event on the channel will - * be seen by Tcl. + * Sets up the notifier so that a future event on the channel will be + * seen by Tcl. * *---------------------------------------------------------------------- */ static void -TcpWatchProc(instanceData, mask) - ClientData instanceData; /* The socket state. */ - int mask; /* Events of interest; an OR-ed - * combination of TCL_READABLE, - * TCL_WRITABLE and TCL_EXCEPTION. */ +TcpWatchProc( + ClientData instanceData, /* The socket state. */ + int mask) /* Events of interest; an OR-ed combination of + * TCL_READABLE, TCL_WRITABLE and + * TCL_EXCEPTION. */ { TcpState *statePtr = (TcpState *) instanceData; /* - * Make sure we don't mess with server sockets since they will never - * be readable or writable at the Tcl level. This keeps Tcl scripts - * from interfering with the -accept behavior. + * Make sure we don't mess with server sockets since they will never be + * readable or writable at the Tcl level. This keeps Tcl scripts from + * interfering with the -accept behavior. */ if (!statePtr->acceptProc) { @@ -2446,12 +2228,12 @@ TcpWatchProc(instanceData, mask) * * TcpGetHandleProc -- * - * Called from Tcl_GetChannelHandle to retrieve OS handles from inside - * a TCP socket based channel. + * Called from Tcl_GetChannelHandle to retrieve OS handles from inside a + * TCP socket based channel. * * Results: - * Returns TCL_OK with the fd in handlePtr, or TCL_ERROR if - * there is no handle for the specified direction. + * Returns TCL_OK with the fd in handlePtr, or TCL_ERROR if there is no + * handle for the specified direction. * * Side effects: * None. @@ -2461,14 +2243,14 @@ TcpWatchProc(instanceData, mask) /* ARGSUSED */ static int -TcpGetHandleProc(instanceData, direction, handlePtr) - ClientData instanceData; /* The socket state. */ - int direction; /* Not used. */ - ClientData *handlePtr; /* Where to store the handle. */ +TcpGetHandleProc( + ClientData instanceData, /* The socket state. */ + int direction, /* Not used. */ + ClientData *handlePtr) /* Where to store the handle. */ { TcpState *statePtr = (TcpState *) instanceData; - *handlePtr = (ClientData)statePtr->fd; + *handlePtr = (ClientData) INT2PTR(statePtr->fd); return TCL_OK; } @@ -2477,12 +2259,12 @@ TcpGetHandleProc(instanceData, direction, handlePtr) * * CreateSocket -- * - * This function opens a new socket in client or server mode - * and initializes the TcpState structure. + * This function opens a new socket in client or server mode and + * initializes the TcpState structure. * * Results: - * Returns a new TcpState, or NULL with an error in the interp's - * result, if interp is not NULL. + * Returns a new TcpState, or NULL with an error in the interp's result, + * if interp is not NULL. * * Side effects: * Opens a socket. @@ -2491,31 +2273,31 @@ TcpGetHandleProc(instanceData, direction, handlePtr) */ static TcpState * -CreateSocket(interp, port, host, server, myaddr, myport, async) - Tcl_Interp *interp; /* For error reporting; can be NULL. */ - int port; /* Port number to open. */ - CONST char *host; /* Name of host on which to open port. - * NULL implies INADDR_ANY */ - int server; /* 1 if socket should be a server socket, - * else 0 for a client socket. */ - CONST char *myaddr; /* Optional client-side address */ - int myport; /* Optional client-side port */ - int async; /* If nonzero and creating a client socket, +CreateSocket( + Tcl_Interp *interp, /* For error reporting; can be NULL. */ + int port, /* Port number to open. */ + const char *host, /* Name of host on which to open port. NULL + * implies INADDR_ANY */ + int server, /* 1 if socket should be a server socket, else + * 0 for a client socket. */ + const char *myaddr, /* Optional client-side address */ + int myport, /* Optional client-side port */ + int async) /* If nonzero and creating a client socket, * attempt to do an async connect. Otherwise * do a synchronous connect or bind. */ { - int status, sock, asyncConnect, curState, origState; + int status, sock, asyncConnect, curState; struct sockaddr_in sockaddr; /* socket address */ struct sockaddr_in mysockaddr; /* Socket address for client */ TcpState *statePtr; + const char *errorMsg = NULL; sock = -1; - origState = 0; - if (! CreateSocketAddress(&sockaddr, host, port)) { + if (!CreateSocketAddress(&sockaddr, host, port, 0, &errorMsg)) { goto addressError; } if ((myaddr != NULL || myport != 0) && - ! CreateSocketAddress(&mysockaddr, myaddr, myport)) { + !CreateSocketAddress(&mysockaddr, myaddr, myport, 1, &errorMsg)) { goto addressError; } @@ -2525,8 +2307,8 @@ CreateSocket(interp, port, host, server, myaddr, myport, async) } /* - * Set the close-on-exec flag so that the socket will not get - * inherited by child processes. + * Set the close-on-exec flag so that the socket will not get inherited by + * child processes. */ fcntl(sock, F_SETFD, FD_CLOEXEC); @@ -2552,9 +2334,9 @@ CreateSocket(interp, port, host, server, myaddr, myport, async) sizeof(struct sockaddr)); if (status != -1) { status = listen(sock, SOMAXCONN); - } + } } else { - if (myaddr != NULL || myport != 0) { + if (myaddr != NULL || myport != 0) { curState = 1; (void) setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, (char *) &curState, sizeof(curState)); @@ -2567,20 +2349,13 @@ CreateSocket(interp, port, host, server, myaddr, myport, async) /* * Attempt to connect. The connect may fail at present with an - * EINPROGRESS but at a later time it will complete. The caller - * will set up a file handler on the socket if she is interested in - * being informed when the connect completes. + * EINPROGRESS but at a later time it will complete. The caller will + * set up a file handler on the socket if she is interested in being + * informed when the connect completes. */ if (async) { -#ifndef USE_FIONBIO - origState = fcntl(sock, F_GETFL); - curState = origState | O_NONBLOCK; - status = fcntl(sock, F_SETFL, curState); -#else /* USE_FIONBIO */ - curState = 1; - status = ioctl(sock, FIONBIO, &curState); -#endif /* !USE_FIONBIO */ + status = TclUnixSetBlockingMode(sock, TCL_MODE_NONBLOCKING); } else { status = 0; } @@ -2596,29 +2371,23 @@ CreateSocket(interp, port, host, server, myaddr, myport, async) /* * Here we are if the connect succeeds. In case of an * asynchronous connect we have to reset the channel to - * blocking mode. This appears to happen not very often, - * but e.g. on a HP 9000/800 under HP-UX B.11.00 we enter - * this stage. [Bug: 4388] + * blocking mode. This appears to happen not very often, but + * e.g. on a HP 9000/800 under HP-UX B.11.00 we enter this + * stage. [Bug: 4388] */ + if (async) { -#ifndef USE_FIONBIO - origState = fcntl(sock, F_GETFL); - curState = origState & ~(O_NONBLOCK); - status = fcntl(sock, F_SETFL, curState); -#else /* USE_FIONBIO */ - curState = 0; - status = ioctl(sock, FIONBIO, &curState); -#endif /* !USE_FIONBIO */ + status = TclUnixSetBlockingMode(sock, TCL_MODE_BLOCKING); } } } } -bindError: + bindError: if (status < 0) { if (interp != NULL) { Tcl_AppendResult(interp, "couldn't open socket: ", - Tcl_PosixError(interp), (char *) NULL); + Tcl_PosixError(interp), NULL); } if (sock != -1) { close(sock); @@ -2639,13 +2408,16 @@ bindError: return statePtr; -addressError: + addressError: if (sock != -1) { close(sock); } if (interp != NULL) { Tcl_AppendResult(interp, "couldn't open socket: ", - Tcl_PosixError(interp), (char *) NULL); + Tcl_PosixError(interp), NULL); + if (errorMsg != NULL) { + Tcl_AppendResult(interp, " (", errorMsg, ")", NULL); + } } return NULL; } @@ -2658,8 +2430,8 @@ addressError: * This function initializes a sockaddr structure for a host and port. * * Results: - * 1 if the host was valid, 0 if the host could not be converted to - * an IP address. + * 1 if the host was valid, 0 if the host could not be converted to an IP + * address. * * Side effects: * Fills in the *sockaddrPtr structure. @@ -2668,22 +2440,85 @@ addressError: */ static int -CreateSocketAddress(sockaddrPtr, host, port) - struct sockaddr_in *sockaddrPtr; /* Socket address */ - CONST char *host; /* Host. NULL implies INADDR_ANY */ - int port; /* Port number */ +CreateSocketAddress( + struct sockaddr_in *sockaddrPtr, /* Socket address */ + const char *host, /* Host. NULL implies INADDR_ANY */ + int port, /* Port number */ + int willBind, /* Is this an address to bind() to or + * to connect() to? */ + const char **errorMsgPtr) /* Place to store the error message + * detail, if available. */ { - struct hostent *hostent; /* Host database entry */ +#ifdef HAVE_GETADDRINFO + struct addrinfo hints, *resPtr = NULL; + char *native; + Tcl_DString ds; + int result; + + if (host == NULL) { + sockaddrPtr->sin_family = AF_INET; + sockaddrPtr->sin_addr.s_addr = INADDR_ANY; + addPort: + sockaddrPtr->sin_port = htons((unsigned short) (port & 0xFFFF)); + return 1; + } + + (void) memset(&hints, 0, sizeof(struct addrinfo)); + hints.ai_family = AF_INET; + hints.ai_socktype = SOCK_STREAM; + if (willBind) { + hints.ai_flags |= AI_PASSIVE; + } + + /* + * Note that getaddrinfo() *is* thread-safe. If a platform doesn't get + * that right, it shouldn't use this part of the code. + */ + + native = Tcl_UtfToExternalDString(NULL, host, -1, &ds); + result = getaddrinfo(native, NULL, &hints, &resPtr); + Tcl_DStringFree(&ds); + if (result == 0) { + memcpy(sockaddrPtr, resPtr->ai_addr, sizeof(struct sockaddr_in)); + freeaddrinfo(resPtr); + goto addPort; + } + + /* + * Ought to use gai_strerror() here... + */ + + switch (result) { + case EAI_NONAME: + case EAI_SERVICE: +#if defined(EAI_ADDRFAMILY) && EAI_ADDRFAMILY != EAI_NONAME + case EAI_ADDRFAMILY: +#endif +#if defined(EAI_NODATA) && EAI_NODATA != EAI_NONAME + case EAI_NODATA: +#endif + *errorMsgPtr = gai_strerror(result); + errno = EHOSTUNREACH; + return 0; + case EAI_SYSTEM: + return 0; + default: + *errorMsgPtr = gai_strerror(result); + errno = ENXIO; + return 0; + } +#else /* !HAVE_GETADDRINFO */ struct in_addr addr; /* For 64/32 bit madness */ - (void) memset((VOID *) sockaddrPtr, '\0', sizeof(struct sockaddr_in)); + (void) memset(sockaddrPtr, '\0', sizeof(struct sockaddr_in)); sockaddrPtr->sin_family = AF_INET; sockaddrPtr->sin_port = htons((unsigned short) (port & 0xFFFF)); if (host == NULL) { addr.s_addr = INADDR_ANY; } else { + struct hostent *hostent; /* Host database entry */ Tcl_DString ds; - CONST char *native; + const char *native; if (host == NULL) { native = NULL; @@ -2691,15 +2526,16 @@ CreateSocketAddress(sockaddrPtr, host, port) native = Tcl_UtfToExternalDString(NULL, host, -1, &ds); } addr.s_addr = inet_addr(native); /* INTL: Native. */ + /* - * This is 0xFFFFFFFF to ensure that it compares as a 32bit -1 - * on either 32 or 64 bits systems. + * This is 0xFFFFFFFF to ensure that it compares as a 32bit -1 on + * either 32 or 64 bits systems. */ + if (addr.s_addr == 0xFFFFFFFF) { - hostent = TclpGetHostByName(native); /* INTL: Native. */ - if (hostent != (struct hostent *) NULL) { - memcpy((VOID *) &addr, - (VOID *) hostent->h_addr_list[0], + hostent = TclpGetHostByName(native); /* INTL: Native. */ + if (hostent != NULL) { + memcpy(&addr, hostent->h_addr_list[0], (size_t) hostent->h_length); } else { #ifdef EHOSTUNREACH @@ -2712,7 +2548,7 @@ CreateSocketAddress(sockaddrPtr, host, port) if (native != NULL) { Tcl_DStringFree(&ds); } - return 0; /* error */ + return 0; /* Error. */ } } if (native != NULL) { @@ -2721,14 +2557,15 @@ CreateSocketAddress(sockaddrPtr, host, port) } /* - * NOTE: On 64 bit machines the assignment below is rumored to not - * do the right thing. Please report errors related to this if you - * observe incorrect behavior on 64 bit machines such as DEC Alphas. - * Should we modify this code to do an explicit memcpy? + * NOTE: On 64 bit machines the assignment below is rumored to not do the + * right thing. Please report errors related to this if you observe + * incorrect behavior on 64 bit machines such as DEC Alphas. Should we + * modify this code to do an explicit memcpy? */ sockaddrPtr->sin_addr.s_addr = addr.s_addr; - return 1; /* Success. */ + return 1; /* Success. */ +#endif /* HAVE_GETADDRINFO */ } /* @@ -2739,8 +2576,8 @@ CreateSocketAddress(sockaddrPtr, host, port) * Opens a TCP client socket and creates a channel around it. * * Results: - * The channel or NULL if failed. An error message is returned - * in the interpreter on failure. + * The channel or NULL if failed. An error message is returned in the + * interpreter on failure. * * Side effects: * Opens a client socket and creates a new channel. @@ -2749,15 +2586,15 @@ CreateSocketAddress(sockaddrPtr, host, port) */ Tcl_Channel -Tcl_OpenTcpClient(interp, port, host, myaddr, myport, async) - Tcl_Interp *interp; /* For error reporting; can be NULL. */ - int port; /* Port number to open. */ - CONST char *host; /* Host on which to open port. */ - CONST char *myaddr; /* Client-side address */ - int myport; /* Client-side port */ - int async; /* If nonzero, attempt to do an - * asynchronous connect. Otherwise - * we do a blocking connect. */ +Tcl_OpenTcpClient( + Tcl_Interp *interp, /* For error reporting; can be NULL. */ + int port, /* Port number to open. */ + const char *host, /* Host on which to open port. */ + const char *myaddr, /* Client-side address */ + int myport, /* Client-side port */ + int async) /* If nonzero, attempt to do an asynchronous + * connect. Otherwise we do a blocking + * connect. */ { TcpState *statePtr; char channelName[16 + TCL_INTEGER_SPACE]; @@ -2772,7 +2609,7 @@ Tcl_OpenTcpClient(interp, port, host, myaddr, myport, async) } statePtr->acceptProc = NULL; - statePtr->acceptProcData = (ClientData) NULL; + statePtr->acceptProcData = NULL; sprintf(channelName, "sock%d", statePtr->fd); @@ -2780,7 +2617,7 @@ Tcl_OpenTcpClient(interp, port, host, myaddr, myport, async) (ClientData) statePtr, (TCL_READABLE | TCL_WRITABLE)); if (Tcl_SetChannelOption(interp, statePtr->channel, "-translation", "auto crlf") == TCL_ERROR) { - Tcl_Close((Tcl_Interp *) NULL, statePtr->channel); + Tcl_Close(NULL, statePtr->channel); return NULL; } return statePtr->channel; @@ -2803,8 +2640,8 @@ Tcl_OpenTcpClient(interp, port, host, myaddr, myport, async) */ Tcl_Channel -Tcl_MakeTcpClientChannel(sock) - ClientData sock; /* The socket to wrap up into a channel. */ +Tcl_MakeTcpClientChannel( + ClientData sock) /* The socket to wrap up into a channel. */ { return MakeTcpClientChannelMode(sock, (TCL_READABLE | TCL_WRITABLE)); } @@ -2827,27 +2664,27 @@ Tcl_MakeTcpClientChannel(sock) */ static Tcl_Channel -MakeTcpClientChannelMode(sock, mode) - ClientData sock; /* The socket to wrap up into a channel. */ - int mode; /* ORed combination of TCL_READABLE and +MakeTcpClientChannelMode( + ClientData sock, /* The socket to wrap up into a channel. */ + int mode) /* ORed combination of TCL_READABLE and * TCL_WRITABLE to indicate file mode. */ { TcpState *statePtr; char channelName[16 + TCL_INTEGER_SPACE]; statePtr = (TcpState *) ckalloc((unsigned) sizeof(TcpState)); - statePtr->fd = (int) sock; + statePtr->fd = PTR2INT(sock); statePtr->flags = 0; statePtr->acceptProc = NULL; - statePtr->acceptProcData = (ClientData) NULL; + statePtr->acceptProcData = NULL; sprintf(channelName, "sock%d", statePtr->fd); statePtr->channel = Tcl_CreateChannel(&tcpChannelType, channelName, (ClientData) statePtr, mode); - if (Tcl_SetChannelOption((Tcl_Interp *) NULL, statePtr->channel, - "-translation", "auto crlf") == TCL_ERROR) { - Tcl_Close((Tcl_Interp *) NULL, statePtr->channel); + if (Tcl_SetChannelOption(NULL, statePtr->channel, "-translation", + "auto crlf") == TCL_ERROR) { + Tcl_Close(NULL, statePtr->channel); return NULL; } return statePtr->channel; @@ -2861,9 +2698,8 @@ MakeTcpClientChannelMode(sock, mode) * Opens a TCP server socket and creates a channel around it. * * Results: - * The channel or NULL if failed. If an error occurred, an - * error message is left in the interp's result if interp is - * not NULL. + * The channel or NULL if failed. If an error occurred, an error message + * is left in the interp's result if interp is not NULL. * * Side effects: * Opens a server socket and creates a new channel. @@ -2872,14 +2708,14 @@ MakeTcpClientChannelMode(sock, mode) */ Tcl_Channel -Tcl_OpenTcpServer(interp, port, myHost, acceptProc, acceptProcData) - Tcl_Interp *interp; /* For error reporting - may be - * NULL. */ - int port; /* Port number to open. */ - CONST char *myHost; /* Name of local host. */ - Tcl_TcpAcceptProc *acceptProc; /* Callback for accepting connections - * from new clients. */ - ClientData acceptProcData; /* Data for the callback. */ +Tcl_OpenTcpServer( + Tcl_Interp *interp, /* For error reporting - may be NULL. */ + int port, /* Port number to open. */ + const char *myHost, /* Name of local host. */ + Tcl_TcpAcceptProc *acceptProc, + /* Callback for accepting connections from new + * clients. */ + ClientData acceptProcData) /* Data for the callback. */ { TcpState *statePtr; char channelName[16 + TCL_INTEGER_SPACE]; @@ -2897,8 +2733,8 @@ Tcl_OpenTcpServer(interp, port, myHost, acceptProc, acceptProcData) statePtr->acceptProcData = acceptProcData; /* - * Set up the callback mechanism for accepting connections - * from new clients. + * Set up the callback mechanism for accepting connections from new + * clients. */ Tcl_CreateFileHandler(statePtr->fd, TCL_READABLE, TcpAccept, @@ -2919,23 +2755,23 @@ Tcl_OpenTcpServer(interp, port, myHost, acceptProc, acceptProcData) * None. * * Side effects: - * Creates a new connection socket. Calls the registered callback - * for the connection acceptance mechanism. + * Creates a new connection socket. Calls the registered callback for the + * connection acceptance mechanism. * *---------------------------------------------------------------------- */ /* ARGSUSED */ static void -TcpAccept(data, mask) - ClientData data; /* Callback token. */ - int mask; /* Not used. */ +TcpAccept( + ClientData data, /* Callback token. */ + int mask) /* Not used. */ { - TcpState *sockState; /* Client data of server socket. */ - int newsock; /* The new client socket */ - TcpState *newSockState; /* State for new socket. */ - struct sockaddr_in addr; /* The remote address */ - socklen_t len; /* For accept interface */ + TcpState *sockState; /* Client data of server socket. */ + int newsock; /* The new client socket */ + TcpState *newSockState; /* State for new socket. */ + struct sockaddr_in addr; /* The remote address */ + socklen_t len; /* For accept interface */ char channelName[16 + TCL_INTEGER_SPACE]; sockState = (TcpState *) data; @@ -2947,8 +2783,8 @@ TcpAccept(data, mask) } /* - * Set close-on-exec flag to prevent the newly accepted socket from - * being inherited by child processes. + * Set close-on-exec flag to prevent the newly accepted socket from being + * inherited by child processes. */ (void) fcntl(newsock, F_SETFD, FD_CLOEXEC); @@ -2979,22 +2815,21 @@ TcpAccept(data, mask) * * TclpGetDefaultStdChannel -- * - * Creates channels for standard input, standard output or standard - * error output if they do not already exist. + * Creates channels for standard input, standard output or standard error + * output if they do not already exist. * * Results: * Returns the specified default standard channel, or NULL. * * Side effects: - * May cause the creation of a standard channel and the underlying - * file. + * May cause the creation of a standard channel and the underlying file. * *---------------------------------------------------------------------- */ Tcl_Channel -TclpGetDefaultStdChannel(type) - int type; /* One of TCL_STDIN, TCL_STDOUT, TCL_STDERR. */ +TclpGetDefaultStdChannel( + int type) /* One of TCL_STDIN, TCL_STDOUT, TCL_STDERR. */ { Tcl_Channel channel = NULL; int fd = 0; /* Initializations needed to prevent */ @@ -3004,46 +2839,47 @@ TclpGetDefaultStdChannel(type) /* * Some #def's to make the code a little clearer! */ + #define ZERO_OFFSET ((Tcl_SeekOffset) 0) #define ERROR_OFFSET ((Tcl_SeekOffset) -1) switch (type) { - case TCL_STDIN: - if ((TclOSseek(0, ZERO_OFFSET, SEEK_CUR) == ERROR_OFFSET) - && (errno == EBADF)) { - return (Tcl_Channel) NULL; - } - fd = 0; - mode = TCL_READABLE; - bufMode = "line"; - break; - case TCL_STDOUT: - if ((TclOSseek(1, ZERO_OFFSET, SEEK_CUR) == ERROR_OFFSET) - && (errno == EBADF)) { - return (Tcl_Channel) NULL; - } - fd = 1; - mode = TCL_WRITABLE; - bufMode = "line"; - break; - case TCL_STDERR: - if ((TclOSseek(2, ZERO_OFFSET, SEEK_CUR) == ERROR_OFFSET) - && (errno == EBADF)) { - return (Tcl_Channel) NULL; - } - fd = 2; - mode = TCL_WRITABLE; - bufMode = "none"; - break; - default: - panic("TclGetDefaultStdChannel: Unexpected channel type"); - break; + case TCL_STDIN: + if ((TclOSseek(0, ZERO_OFFSET, SEEK_CUR) == ERROR_OFFSET) + && (errno == EBADF)) { + return NULL; + } + fd = 0; + mode = TCL_READABLE; + bufMode = "line"; + break; + case TCL_STDOUT: + if ((TclOSseek(1, ZERO_OFFSET, SEEK_CUR) == ERROR_OFFSET) + && (errno == EBADF)) { + return NULL; + } + fd = 1; + mode = TCL_WRITABLE; + bufMode = "line"; + break; + case TCL_STDERR: + if ((TclOSseek(2, ZERO_OFFSET, SEEK_CUR) == ERROR_OFFSET) + && (errno == EBADF)) { + return NULL; + } + fd = 2; + mode = TCL_WRITABLE; + bufMode = "none"; + break; + default: + Tcl_Panic("TclGetDefaultStdChannel: Unexpected channel type"); + break; } #undef ZERO_OFFSET #undef ERROR_OFFSET - channel = Tcl_MakeFileChannel((ClientData) fd, mode); + channel = Tcl_MakeFileChannel((ClientData) INT2PTR(fd), mode); if (channel == NULL) { return NULL; } @@ -3066,16 +2902,16 @@ TclpGetDefaultStdChannel(type) * * Tcl_GetOpenFile -- * - * Given a name of a channel registered in the given interpreter, - * returns a FILE * for it. + * Given a name of a channel registered in the given interpreter, returns + * a FILE * for it. * * Results: * A standard Tcl result. If the channel is registered in the given - * interpreter and it is managed by the "file" channel driver, and - * it is open for the requested mode, then the output parameter - * filePtr is set to a FILE * for the underlying file. On error, the - * filePtr is not set, TCL_ERROR is returned and an error message is - * left in the interp's result. + * interpreter and it is managed by the "file" channel driver, and it is + * open for the requested mode, then the output parameter filePtr is set + * to a FILE * for the underlying file. On error, the filePtr is not set, + * TCL_ERROR is returned and an error message is left in the interp's + * result. * * Side effects: * May invoke fdopen to create the FILE * for the requested file. @@ -3084,36 +2920,35 @@ TclpGetDefaultStdChannel(type) */ int -Tcl_GetOpenFile(interp, string, forWriting, checkUsage, filePtr) - Tcl_Interp *interp; /* Interpreter in which to find file. */ - CONST char *string; /* String that identifies file. */ - int forWriting; /* 1 means the file is going to be used - * for writing, 0 means for reading. */ - int checkUsage; /* 1 means verify that the file was opened - * in a mode that allows the access specified - * by "forWriting". Ignored, we always - * check that the channel is open for the - * requested mode. */ - ClientData *filePtr; /* Store pointer to FILE structure here. */ +Tcl_GetOpenFile( + Tcl_Interp *interp, /* Interpreter in which to find file. */ + const char *chanID, /* String that identifies file. */ + int forWriting, /* 1 means the file is going to be used for + * writing, 0 means for reading. */ + int checkUsage, /* 1 means verify that the file was opened in + * a mode that allows the access specified by + * "forWriting". Ignored, we always check that + * the channel is open for the requested + * mode. */ + ClientData *filePtr) /* Store pointer to FILE structure here. */ { Tcl_Channel chan; - int chanMode; - Tcl_ChannelType *chanTypePtr; + int chanMode, fd; + const Tcl_ChannelType *chanTypePtr; ClientData data; - int fd; FILE *f; - chan = Tcl_GetChannel(interp, string, &chanMode); + chan = Tcl_GetChannel(interp, chanID, &chanMode); if (chan == (Tcl_Channel) NULL) { return TCL_ERROR; } if ((forWriting) && ((chanMode & TCL_WRITABLE) == 0)) { - Tcl_AppendResult(interp, - "\"", string, "\" wasn't opened for writing", (char *) NULL); + Tcl_AppendResult(interp, "\"", chanID, "\" wasn't opened for writing", + NULL); return TCL_ERROR; - } else if ((!(forWriting)) && ((chanMode & TCL_READABLE) == 0)) { - Tcl_AppendResult(interp, - "\"", string, "\" wasn't opened for reading", (char *) NULL); + } else if ((!forWriting) && ((chanMode & TCL_READABLE) == 0)) { + Tcl_AppendResult(interp, "\"", chanID, "\" wasn't opened for reading", + NULL); return TCL_ERROR; } @@ -3133,18 +2968,18 @@ Tcl_GetOpenFile(interp, string, forWriting, checkUsage, filePtr) if (Tcl_GetChannelHandle(chan, (forWriting ? TCL_WRITABLE : TCL_READABLE), (ClientData*) &data) == TCL_OK) { - fd = (int) data; + fd = PTR2INT(data); /* * The call to fdopen below is probably dangerous, since it will - * truncate an existing file if the file is being opened - * for writing.... + * truncate an existing file if the file is being opened for + * writing.... */ f = fdopen(fd, (forWriting ? "w" : "r")); if (f == NULL) { - Tcl_AppendResult(interp, "cannot get a FILE * for \"", string, - "\"", (char *) NULL); + Tcl_AppendResult(interp, "cannot get a FILE * for \"", chanID, + "\"", NULL); return TCL_ERROR; } *filePtr = (ClientData) f; @@ -3152,28 +2987,29 @@ Tcl_GetOpenFile(interp, string, forWriting, checkUsage, filePtr) } } - Tcl_AppendResult(interp, "\"", string, - "\" cannot be used to get a FILE *", (char *) NULL); - return TCL_ERROR; + Tcl_AppendResult(interp, "\"", chanID, + "\" cannot be used to get a FILE *", NULL); + return TCL_ERROR; } +#ifndef HAVE_COREFOUNDATION /* Darwin/Mac OS X CoreFoundation notifier is + * in tclMacOSXNotify.c */ /* *---------------------------------------------------------------------- * * TclUnixWaitForFile -- * - * This procedure waits synchronously for a file to become readable - * or writable, with an optional timeout. + * This function waits synchronously for a file to become readable or + * writable, with an optional timeout. * * Results: * The return value is an OR'ed combination of TCL_READABLE, - * TCL_WRITABLE, and TCL_EXCEPTION, indicating the conditions - * that are present on file at the time of the return. This - * procedure will not return until either "timeout" milliseconds - * have elapsed or at least one of the conditions given by mask - * has occurred for file (a return value of 0 means that a timeout - * occurred). No normal events will be serviced during the - * execution of this procedure. + * TCL_WRITABLE, and TCL_EXCEPTION, indicating the conditions that are + * present on file at the time of the return. This function will not + * return until either "timeout" milliseconds have elapsed or at least + * one of the conditions given by mask has occurred for file (a return + * value of 0 means that a timeout occurred). No normal events will be + * serviced during the execution of this function. * * Side effects: * Time passes. @@ -3182,16 +3018,16 @@ Tcl_GetOpenFile(interp, string, forWriting, checkUsage, filePtr) */ int -TclUnixWaitForFile(fd, mask, timeout) - int fd; /* Handle for file on which to wait. */ - int mask; /* What to wait for: OR'ed combination of +TclUnixWaitForFile( + int fd, /* Handle for file on which to wait. */ + int mask, /* What to wait for: OR'ed combination of * TCL_READABLE, TCL_WRITABLE, and * TCL_EXCEPTION. */ - int timeout; /* Maximum amount of time to wait for one - * of the conditions in mask to occur, in - * milliseconds. A value of 0 means don't - * wait at all, and a value of -1 means - * wait forever. */ + int timeout) /* Maximum amount of time to wait for one of + * the conditions in mask to occur, in + * milliseconds. A value of 0 means don't wait + * at all, and a value of -1 means wait + * forever. */ { Tcl_Time abortTime = {0, 0}, now; /* silence gcc 4 warning */ struct timeval blockTime, *timeoutPtr; @@ -3212,8 +3048,8 @@ TclUnixWaitForFile(fd, mask, timeout) #endif /* - * If there is a non-zero finite timeout, compute the time when - * we give up. + * If there is a non-zero finite timeout, compute the time when we give + * up. */ if (timeout > 0) { @@ -3242,8 +3078,8 @@ TclUnixWaitForFile(fd, mask, timeout) FD_ZERO(&exceptionalMask); /* - * Loop in a mini-event loop of our own, waiting for either the - * file to become ready or a timeout to occur. + * Loop in a mini-event loop of our own, waiting for either the file to + * become ready or a timeout to occur. */ while (1) { @@ -3282,13 +3118,13 @@ TclUnixWaitForFile(fd, mask, timeout) &exceptionalMask, timeoutPtr); if (numFound == 1) { if (FD_ISSET(fd, &readableMask)) { - result |= TCL_READABLE; + SET_BITS(result, TCL_READABLE); } if (FD_ISSET(fd, &writableMask)) { - result |= TCL_WRITABLE; + SET_BITS(result, TCL_WRITABLE); } if (FD_ISSET(fd, &exceptionalMask)) { - result |= TCL_EXCEPTION; + SET_BITS(result, TCL_EXCEPTION); } result &= mask; if (result) { @@ -3308,67 +3144,55 @@ TclUnixWaitForFile(fd, mask, timeout) Tcl_GetTime(&now); if ((abortTime.sec < now.sec) - || ((abortTime.sec == now.sec) - && (abortTime.usec <= now.usec))) { + || (abortTime.sec==now.sec && abortTime.usec<=now.usec)) { break; } } return result; } +#endif /* HAVE_COREFOUNDATION */ -#ifdef DEPRECATED /* *---------------------------------------------------------------------- * - * FileThreadActionProc -- + * FileTruncateProc -- * - * Insert or remove any thread local refs to this channel. + * Truncates a file to a given length. * * Results: - * None. + * 0 if the operation succeeded, and -1 if it failed (in which case + * *errorCodePtr will be set to errno). * * Side effects: - * Changes thread local list of valid channels. + * The underlying file is potentially truncated. This can have a wide + * variety of side effects, including moving file pointers that point at + * places later in the file than the truncate point. * *---------------------------------------------------------------------- */ -static void -FileThreadActionProc (instanceData, action) - ClientData instanceData; - int action; +static int +FileTruncateProc( + ClientData instanceData, + Tcl_WideInt length) { - ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); FileState *fsPtr = (FileState *) instanceData; + int result; - if (action == TCL_CHANNEL_THREAD_INSERT) { - fsPtr->nextPtr = tsdPtr->firstFilePtr; - tsdPtr->firstFilePtr = fsPtr; - } else { - FileState **nextPtrPtr; - int removed = 0; - - for (nextPtrPtr = &(tsdPtr->firstFilePtr); (*nextPtrPtr) != NULL; - nextPtrPtr = &((*nextPtrPtr)->nextPtr)) { - if ((*nextPtrPtr) == fsPtr) { - (*nextPtrPtr) = fsPtr->nextPtr; - removed = 1; - break; - } - } - - /* - * This could happen if the channel was created in one - * thread and then moved to another without updating - * the thread local data in each thread. - */ +#ifdef HAVE_TYPE_OFF64_T + /* + * We assume this goes with the type for now... + */ - if (!removed) { - panic("file info ptr not on thread channel list"); - } + result = ftruncate64(fsPtr->fd, (off64_t) length); +#else + result = ftruncate(fsPtr->fd, (off_t) length); +#endif + if (result) { + return errno; } + return 0; } -#endif /* DEPRECATED */ /* * Local Variables: @@ -3379,4 +3203,3 @@ FileThreadActionProc (instanceData, action) * indent-tabs-mode: nil * End: */ - |