diff options
Diffstat (limited to 'unix/tclUnixChan.c')
| -rw-r--r-- | unix/tclUnixChan.c | 2906 |
1 files changed, 1025 insertions, 1881 deletions
diff --git a/unix/tclUnixChan.c b/unix/tclUnixChan.c index d687c9c..fdc9d1d 100644 --- a/unix/tclUnixChan.c +++ b/unix/tclUnixChan.c @@ -1,70 +1,61 @@ -/* +/* * tclUnixChan.c * - * Common channel driver for Unix channels based on files, command - * pipes and TCP sockets. + * Common channel driver for Unix channels based on files, command pipes + * and TCP sockets. * * Copyright (c) 1995-1997 Sun Microsystems, Inc. * Copyright (c) 1998-1999 by Scriptics Corporation. * * See the file "license.terms" for information on usage and redistribution * of this file, and for a DISCLAIMER OF ALL WARRANTIES. - * - * RCS: @(#) $Id: tclUnixChan.c,v 1.18 2000/05/02 22:02:37 kupries Exp $ */ -#include "tclInt.h" /* Internal definitions for Tcl. */ -#include "tclPort.h" /* Portability features for Tcl. */ +#include "tclInt.h" /* Internal definitions for Tcl. */ +#include "tclIO.h" /* To get Channel type declaration. */ + +#undef SUPPORTS_TTY +#if defined(HAVE_TERMIOS_H) +# define SUPPORTS_TTY 1 +# include <termios.h> +# ifdef HAVE_SYS_IOCTL_H +# include <sys/ioctl.h> +# endif /* HAVE_SYS_IOCTL_H */ +# ifdef HAVE_SYS_MODEM_H +# include <sys/modem.h> +# endif /* HAVE_SYS_MODEM_H */ + +# ifdef FIONREAD +# define GETREADQUEUE(fd, int) ioctl((fd), FIONREAD, &(int)) +# elif defined(FIORDCHK) +# define GETREADQUEUE(fd, int) int = ioctl((fd), FIORDCHK, NULL) +# else +# define GETREADQUEUE(fd, int) int = 0 +# endif + +# ifdef TIOCOUTQ +# define GETWRITEQUEUE(fd, int) ioctl((fd), TIOCOUTQ, &(int)) +# else +# define GETWRITEQUEUE(fd, int) int = 0 +# endif + +# if !defined(CRTSCTS) && defined(CNEW_RTSCTS) +# define CRTSCTS CNEW_RTSCTS +# endif /* !CRTSCTS&CNEW_RTSCTS */ +# if !defined(PAREXT) && defined(CMSPAR) +# define PAREXT CMSPAR +# endif /* !PAREXT&&CMSPAR */ + +#endif /* HAVE_TERMIOS_H */ /* - * sys/ioctl.h has already been included by tclPort.h. Including termios.h - * or termio.h causes a bunch of warning messages because some duplicate - * (but not contradictory) #defines exist in termios.h and/or termio.h + * Helper macros to make parts of this file clearer. The macros do exactly + * what they say on the tin. :-) They also only ever refer to their arguments + * once, and so can be used without regard to side effects. */ -#undef NL0 -#undef NL1 -#undef CR0 -#undef CR1 -#undef CR2 -#undef CR3 -#undef TAB0 -#undef TAB1 -#undef TAB2 -#undef XTABS -#undef BS0 -#undef BS1 -#undef FF0 -#undef FF1 -#undef ECHO -#undef NOFLSH -#undef TOSTOP -#undef FLUSHO -#undef PENDIN - -#define SUPPORTS_TTY - -#ifdef USE_TERMIOS -# include <termios.h> -# define IOSTATE struct termios -# define GETIOSTATE(fd, statePtr) tcgetattr((fd), (statePtr)) -# define SETIOSTATE(fd, statePtr) tcsetattr((fd), TCSADRAIN, (statePtr)) -#else /* !USE_TERMIOS */ -#ifdef USE_TERMIO -# include <termio.h> -# define IOSTATE struct termio -# define GETIOSTATE(fd, statePtr) ioctl((fd), TCGETA, (statePtr)) -# define SETIOSTATE(fd, statePtr) ioctl((fd), TCSETAW, (statePtr)) -#else /* !USE_TERMIO */ -#ifdef USE_SGTTY -# include <sgtty.h> -# define IOSTATE struct sgttyb -# define GETIOSTATE(fd, statePtr) ioctl((fd), TIOCGETP, (statePtr)) -# define SETIOSTATE(fd, statePtr) ioctl((fd), TIOCSETP, (statePtr)) -#else /* !USE_SGTTY */ -# undef SUPPORTS_TTY -#endif /* !USE_SGTTY */ -#endif /* !USE_TERMIO */ -#endif /* !USE_TERMIOS */ + +#define SET_BITS(var, bits) ((var) |= (bits)) +#define CLEAR_BITS(var, bits) ((var) &= ~(bits)) /* * This structure describes per-instance state of a file based channel. @@ -76,31 +67,15 @@ typedef struct FileState { int validMask; /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, or TCL_EXCEPTION: indicates * which operations are valid on the file. */ -#ifdef DEPRECATED - struct FileState *nextPtr; /* Pointer to next file in list of all - * file channels. */ -#endif } FileState; #ifdef SUPPORTS_TTY /* - * The following structure describes per-instance state of a tty-based - * channel. + * The following structure is used to set or get the serial port attributes in + * a platform-independant manner. */ -typedef struct TtyState { - FileState fs; /* Per-instance state of the file - * descriptor. Must be the first field. */ - IOSTATE savedState; /* Initial state of device. Used to reset - * state when device closed. */ -} TtyState; - -/* - * The following structure is used to set or get the serial port - * attributes in a platform-independant manner. - */ - typedef struct TtyAttrs { int baud; int parity; @@ -110,141 +85,72 @@ typedef struct TtyAttrs { #endif /* !SUPPORTS_TTY */ -#ifdef DEPRECATED -typedef struct ThreadSpecificData { - /* - * List of all file channels currently open. This is per thread and is - * used to match up fd's to channels, which rarely occurs. - */ - - FileState *firstFilePtr; -} ThreadSpecificData; - -static Tcl_ThreadDataKey dataKey; -#endif - -/* - * This structure describes per-instance state of a tcp based channel. - */ - -typedef struct TcpState { - Tcl_Channel channel; /* Channel associated with this file. */ - int fd; /* The socket itself. */ - int flags; /* ORed combination of the bitfields - * defined below. */ - Tcl_TcpAcceptProc *acceptProc; - /* Proc to call on accept. */ - ClientData acceptProcData; /* The data for the accept proc. */ -} TcpState; - -/* - * These bits may be ORed together into the "flags" field of a TcpState - * structure. - */ - -#define TCP_ASYNC_SOCKET (1<<0) /* Asynchronous socket. */ -#define TCP_ASYNC_CONNECT (1<<1) /* Async connect in progress. */ - -/* - * The following defines the maximum length of the listen queue. This is - * the number of outstanding yet-to-be-serviced requests for a connection - * on a server socket, more than this number of outstanding requests and - * the connection request will fail. - */ - -#ifndef SOMAXCONN -#define SOMAXCONN 100 -#endif - -#if (SOMAXCONN < 100) -#undef SOMAXCONN -#define SOMAXCONN 100 -#endif - -/* - * The following defines how much buffer space the kernel should maintain - * for a socket. - */ - -#define SOCKET_BUFSIZE 4096 +#define UNSUPPORTED_OPTION(detail) \ + if (interp) { \ + Tcl_SetObjResult(interp, Tcl_ObjPrintf( \ + "%s not supported for this platform", (detail))); \ + Tcl_SetErrorCode(interp, "TCL", "UNSUPPORTED", NULL); \ + } /* * Static routines for this file: */ -static TcpState * CreateSocket _ANSI_ARGS_((Tcl_Interp *interp, - int port, char *host, int server, - char *myaddr, int myport, int async)); -static int CreateSocketAddress _ANSI_ARGS_( - (struct sockaddr_in *sockaddrPtr, - char *host, int port)); -static int FileBlockModeProc _ANSI_ARGS_(( - ClientData instanceData, int mode)); -static int FileCloseProc _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp)); -static int FileGetHandleProc _ANSI_ARGS_((ClientData instanceData, - int direction, ClientData *handlePtr)); -static int FileInputProc _ANSI_ARGS_((ClientData instanceData, - char *buf, int toRead, int *errorCode)); -static int FileOutputProc _ANSI_ARGS_(( - ClientData instanceData, char *buf, int toWrite, - int *errorCode)); -static int FileSeekProc _ANSI_ARGS_((ClientData instanceData, - long offset, int mode, int *errorCode)); -static void FileWatchProc _ANSI_ARGS_((ClientData instanceData, - int mask)); -static void TcpAccept _ANSI_ARGS_((ClientData data, int mask)); -static int TcpBlockModeProc _ANSI_ARGS_((ClientData data, - int mode)); -static int TcpCloseProc _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp)); -static int TcpGetHandleProc _ANSI_ARGS_((ClientData instanceData, - int direction, ClientData *handlePtr)); -static int TcpGetOptionProc _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp, char *optionName, - Tcl_DString *dsPtr)); -static int TcpInputProc _ANSI_ARGS_((ClientData instanceData, - char *buf, int toRead, int *errorCode)); -static int TcpOutputProc _ANSI_ARGS_((ClientData instanceData, - char *buf, int toWrite, int *errorCode)); -static void TcpWatchProc _ANSI_ARGS_((ClientData instanceData, - int mask)); +static int FileBlockModeProc(ClientData instanceData, int mode); +static int FileCloseProc(ClientData instanceData, + Tcl_Interp *interp); +static int FileGetHandleProc(ClientData instanceData, + int direction, ClientData *handlePtr); +static int FileInputProc(ClientData instanceData, char *buf, + int toRead, int *errorCode); +static int FileOutputProc(ClientData instanceData, + const char *buf, int toWrite, int *errorCode); +static int FileSeekProc(ClientData instanceData, long offset, + int mode, int *errorCode); +static int FileTruncateProc(ClientData instanceData, + Tcl_WideInt length); +static Tcl_WideInt FileWideSeekProc(ClientData instanceData, + Tcl_WideInt offset, int mode, int *errorCode); +static void FileWatchProc(ClientData instanceData, int mask); #ifdef SUPPORTS_TTY -static int TtyCloseProc _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp)); -static void TtyGetAttributes _ANSI_ARGS_((int fd, - TtyAttrs *ttyPtr)); -static int TtyGetOptionProc _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp, char *optionName, - Tcl_DString *dsPtr)); -static FileState * TtyInit _ANSI_ARGS_((int fd)); -static int TtyParseMode _ANSI_ARGS_((Tcl_Interp *interp, - CONST char *mode, int *speedPtr, int *parityPtr, - int *dataPtr, int *stopPtr)); -static void TtySetAttributes _ANSI_ARGS_((int fd, - TtyAttrs *ttyPtr)); -static int TtySetOptionProc _ANSI_ARGS_((ClientData instanceData, - Tcl_Interp *interp, char *optionName, - char *value)); +static void TtyGetAttributes(int fd, TtyAttrs *ttyPtr); +static int TtyGetOptionProc(ClientData instanceData, + Tcl_Interp *interp, const char *optionName, + Tcl_DString *dsPtr); +static int TtyGetBaud(speed_t speed); +static speed_t TtyGetSpeed(int baud); +static void TtyInit(int fd); +static void TtyModemStatusStr(int status, Tcl_DString *dsPtr); +static int TtyParseMode(Tcl_Interp *interp, const char *mode, + TtyAttrs *ttyPtr); +static void TtySetAttributes(int fd, TtyAttrs *ttyPtr); +static int TtySetOptionProc(ClientData instanceData, + Tcl_Interp *interp, const char *optionName, + const char *value); #endif /* SUPPORTS_TTY */ -static int WaitForConnect _ANSI_ARGS_((TcpState *statePtr, - int *errorCodePtr)); /* * This structure describes the channel type structure for file based IO: */ -static Tcl_ChannelType fileChannelType = { - "file", /* Type name. */ - FileBlockModeProc, /* Set blocking/nonblocking mode.*/ - FileCloseProc, /* Close proc. */ - FileInputProc, /* Input proc. */ - FileOutputProc, /* Output proc. */ - FileSeekProc, /* Seek proc. */ - NULL, /* Set option proc. */ - NULL, /* Get option proc. */ - FileWatchProc, /* Initialize notifier. */ - FileGetHandleProc, /* Get OS handles out of channel. */ +static const Tcl_ChannelType fileChannelType = { + "file", /* Type name. */ + TCL_CHANNEL_VERSION_5, /* v5 channel */ + FileCloseProc, /* Close proc. */ + FileInputProc, /* Input proc. */ + FileOutputProc, /* Output proc. */ + FileSeekProc, /* Seek proc. */ + NULL, /* Set option proc. */ + NULL, /* Get option proc. */ + FileWatchProc, /* Initialize notifier. */ + FileGetHandleProc, /* Get OS handles out of channel. */ + NULL, /* close2proc. */ + FileBlockModeProc, /* Set blocking or non-blocking mode.*/ + NULL, /* flush proc. */ + NULL, /* handler proc. */ + FileWideSeekProc, /* wide seek proc. */ + NULL, + FileTruncateProc /* truncate proc. */ }; #ifdef SUPPORTS_TTY @@ -253,46 +159,34 @@ static Tcl_ChannelType fileChannelType = { * Note that this type is a subclass of the "file" type. */ -static Tcl_ChannelType ttyChannelType = { - "tty", /* Type name. */ - FileBlockModeProc, /* Set blocking/nonblocking mode.*/ - TtyCloseProc, /* Close proc. */ - FileInputProc, /* Input proc. */ - FileOutputProc, /* Output proc. */ - NULL, /* Seek proc. */ - TtySetOptionProc, /* Set option proc. */ - TtyGetOptionProc, /* Get option proc. */ - FileWatchProc, /* Initialize notifier. */ - FileGetHandleProc, /* Get OS handles out of channel. */ +static const Tcl_ChannelType ttyChannelType = { + "tty", /* Type name. */ + TCL_CHANNEL_VERSION_5, /* v5 channel */ + FileCloseProc, /* Close proc. */ + FileInputProc, /* Input proc. */ + FileOutputProc, /* Output proc. */ + NULL, /* Seek proc. */ + TtySetOptionProc, /* Set option proc. */ + TtyGetOptionProc, /* Get option proc. */ + FileWatchProc, /* Initialize notifier. */ + FileGetHandleProc, /* Get OS handles out of channel. */ + NULL, /* close2proc. */ + FileBlockModeProc, /* Set blocking or non-blocking mode.*/ + NULL, /* flush proc. */ + NULL, /* handler proc. */ + NULL, /* wide seek proc. */ + NULL, /* thread action proc. */ + NULL /* truncate proc. */ }; #endif /* SUPPORTS_TTY */ - -/* - * This structure describes the channel type structure for TCP socket - * based IO: - */ - -static Tcl_ChannelType tcpChannelType = { - "tcp", /* Type name. */ - TcpBlockModeProc, /* Set blocking/nonblocking mode.*/ - TcpCloseProc, /* Close proc. */ - TcpInputProc, /* Input proc. */ - TcpOutputProc, /* Output proc. */ - NULL, /* Seek proc. */ - NULL, /* Set option proc. */ - TcpGetOptionProc, /* Get option proc. */ - TcpWatchProc, /* Initialize notifier. */ - TcpGetHandleProc, /* Get OS handles out of channel. */ -}; - /* *---------------------------------------------------------------------- * * FileBlockModeProc -- * - * Helper procedure to set blocking and nonblocking modes on a - * file based channel. Invoked by generic IO level code. + * Helper function to set blocking and nonblocking modes on a file based + * channel. Invoked by generic IO level code. * * Results: * 0 if successful, errno when failed. @@ -305,36 +199,17 @@ static Tcl_ChannelType tcpChannelType = { /* ARGSUSED */ static int -FileBlockModeProc(instanceData, mode) - ClientData instanceData; /* File state. */ - int mode; /* The mode to set. Can be one of - * TCL_MODE_BLOCKING or - * TCL_MODE_NONBLOCKING. */ +FileBlockModeProc( + ClientData instanceData, /* File state. */ + int mode) /* The mode to set. Can be TCL_MODE_BLOCKING + * or TCL_MODE_NONBLOCKING. */ { - FileState *fsPtr = (FileState *) instanceData; - int curStatus; + FileState *fsPtr = instanceData; -#ifndef USE_FIONBIO - curStatus = fcntl(fsPtr->fd, F_GETFL); - if (mode == TCL_MODE_BLOCKING) { - curStatus &= (~(O_NONBLOCK)); - } else { - curStatus |= O_NONBLOCK; - } - if (fcntl(fsPtr->fd, F_SETFL, curStatus) < 0) { - return errno; - } - curStatus = fcntl(fsPtr->fd, F_GETFL); -#else - if (mode == TCL_MODE_BLOCKING) { - curStatus = 0; - } else { - curStatus = 1; - } - if (ioctl(fsPtr->fd, (int) FIONBIO, &curStatus) < 0) { + if (TclUnixSetBlockingMode(fsPtr->fd, mode) < 0) { return errno; } -#endif + return 0; } @@ -343,8 +218,8 @@ FileBlockModeProc(instanceData, mode) * * FileInputProc -- * - * This procedure is invoked from the generic IO level to read - * input from a file based channel. + * This function is invoked from the generic IO level to read input from + * a file based channel. * * Results: * The number of bytes read is returned or -1 on error. An output @@ -357,19 +232,19 @@ FileBlockModeProc(instanceData, mode) */ static int -FileInputProc(instanceData, buf, toRead, errorCodePtr) - ClientData instanceData; /* File state. */ - char *buf; /* Where to store data read. */ - int toRead; /* How much space is available - * in the buffer? */ - int *errorCodePtr; /* Where to store error code. */ +FileInputProc( + ClientData instanceData, /* File state. */ + char *buf, /* Where to store data read. */ + int toRead, /* How much space is available in the + * buffer? */ + int *errorCodePtr) /* Where to store error code. */ { - FileState *fsPtr = (FileState *) instanceData; - int bytesRead; /* How many bytes were actually - * read from the input device? */ + FileState *fsPtr = instanceData; + int bytesRead; /* How many bytes were actually read from the + * input device? */ *errorCodePtr = 0; - + /* * Assume there is always enough input available. This will block * appropriately, and read will unblock as soon as a short read is @@ -379,7 +254,7 @@ FileInputProc(instanceData, buf, toRead, errorCodePtr) bytesRead = read(fsPtr->fd, buf, (size_t) toRead); if (bytesRead > -1) { - return bytesRead; + return bytesRead; } *errorCodePtr = errno; return -1; @@ -390,13 +265,12 @@ FileInputProc(instanceData, buf, toRead, errorCodePtr) * * FileOutputProc-- * - * This procedure is invoked from the generic IO level to write - * output to a file channel. + * This function is invoked from the generic IO level to write output to + * a file channel. * * Results: - * The number of bytes written is returned or -1 on error. An - * output argument contains a POSIX error code if an error occurred, - * or zero. + * The number of bytes written is returned or -1 on error. An output + * argument contains a POSIX error code if an error occurred, or zero. * * Side effects: * Writes output on the output device of the channel. @@ -405,19 +279,29 @@ FileInputProc(instanceData, buf, toRead, errorCodePtr) */ static int -FileOutputProc(instanceData, buf, toWrite, errorCodePtr) - ClientData instanceData; /* File state. */ - char *buf; /* The data buffer. */ - int toWrite; /* How many bytes to write? */ - int *errorCodePtr; /* Where to store error code. */ +FileOutputProc( + ClientData instanceData, /* File state. */ + const char *buf, /* The data buffer. */ + int toWrite, /* How many bytes to write? */ + int *errorCodePtr) /* Where to store error code. */ { - FileState *fsPtr = (FileState *) instanceData; + FileState *fsPtr = instanceData; int written; *errorCodePtr = 0; + + if (toWrite == 0) { + /* + * SF Tcl Bug 465765. Do not try to write nothing into a file. STREAM + * based implementations will considers this as EOF (if there is a + * pipe behind the file). + */ + + return 0; + } written = write(fsPtr->fd, buf, (size_t) toWrite); if (written > -1) { - return written; + return written; } *errorCodePtr = errno; return -1; @@ -428,7 +312,7 @@ FileOutputProc(instanceData, buf, toWrite, errorCodePtr) * * FileCloseProc -- * - * This procedure is called from the generic IO level to perform + * This function is called from the generic IO level to perform * channel-type-specific cleanup when a file based channel is closed. * * Results: @@ -441,40 +325,26 @@ FileOutputProc(instanceData, buf, toWrite, errorCodePtr) */ static int -FileCloseProc(instanceData, interp) - ClientData instanceData; /* File state. */ - Tcl_Interp *interp; /* For error reporting - unused. */ +FileCloseProc( + ClientData instanceData, /* File state. */ + Tcl_Interp *interp) /* For error reporting - unused. */ { - FileState *fsPtr = (FileState *) instanceData; -#ifdef DEPRECATED - FileState **nextPtrPtr; -#endif + FileState *fsPtr = instanceData; int errorCode = 0; -#ifdef DEPRECATED - ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); -#endif + Tcl_DeleteFileHandler(fsPtr->fd); /* * Do not close standard channels while in thread-exit. */ - if (!TclInExit() + if (!TclInThreadExit() || ((fsPtr->fd != 0) && (fsPtr->fd != 1) && (fsPtr->fd != 2))) { if (close(fsPtr->fd) < 0) { errorCode = errno; } } -#ifdef DEPRECATED - for (nextPtrPtr = &(tsdPtr->firstFilePtr); (*nextPtrPtr) != NULL; - nextPtrPtr = &((*nextPtrPtr)->nextPtr)) { - if ((*nextPtrPtr) == fsPtr) { - (*nextPtrPtr) = fsPtr->nextPtr; - break; - } - } -#endif - ckfree((char *) fsPtr); + ckfree(fsPtr); return errorCode; } @@ -483,35 +353,93 @@ FileCloseProc(instanceData, interp) * * FileSeekProc -- * - * This procedure is called by the generic IO level to move the - * access point in a file based channel. + * This function is called by the generic IO level to move the access + * point in a file based channel. * * Results: - * -1 if failed, the new position if successful. An output - * argument contains the POSIX error code if an error occurred, - * or zero. + * -1 if failed, the new position if successful. An output argument + * contains the POSIX error code if an error occurred, or zero. * * Side effects: - * Moves the location at which the channel will be accessed in - * future operations. + * Moves the location at which the channel will be accessed in future + * operations. * *---------------------------------------------------------------------- */ static int -FileSeekProc(instanceData, offset, mode, errorCodePtr) - ClientData instanceData; /* File state. */ - long offset; /* Offset to seek to. */ - int mode; /* Relative to where - * should we seek? Can be - * one of SEEK_START, - * SEEK_SET or SEEK_END. */ - int *errorCodePtr; /* To store error code. */ +FileSeekProc( + ClientData instanceData, /* File state. */ + long offset, /* Offset to seek to. */ + int mode, /* Relative to where should we seek? Can be + * one of SEEK_START, SEEK_SET or SEEK_END. */ + int *errorCodePtr) /* To store error code. */ { - FileState *fsPtr = (FileState *) instanceData; - int newLoc; + FileState *fsPtr = instanceData; + Tcl_WideInt oldLoc, newLoc; + + /* + * Save our current place in case we need to roll-back the seek. + */ + + oldLoc = TclOSseek(fsPtr->fd, (Tcl_SeekOffset) 0, SEEK_CUR); + if (oldLoc == Tcl_LongAsWide(-1)) { + /* + * Bad things are happening. Error out... + */ + + *errorCodePtr = errno; + return -1; + } - newLoc = lseek(fsPtr->fd, (off_t) offset, mode); + newLoc = TclOSseek(fsPtr->fd, (Tcl_SeekOffset) offset, mode); + + /* + * Check for expressability in our return type, and roll-back otherwise. + */ + + if (newLoc > Tcl_LongAsWide(INT_MAX)) { + *errorCodePtr = EOVERFLOW; + TclOSseek(fsPtr->fd, (Tcl_SeekOffset) oldLoc, SEEK_SET); + return -1; + } else { + *errorCodePtr = (newLoc == Tcl_LongAsWide(-1)) ? errno : 0; + } + return (int) Tcl_WideAsLong(newLoc); +} + +/* + *---------------------------------------------------------------------- + * + * FileWideSeekProc -- + * + * This function is called by the generic IO level to move the access + * point in a file based channel, with offsets expressed as wide + * integers. + * + * Results: + * -1 if failed, the new position if successful. An output argument + * contains the POSIX error code if an error occurred, or zero. + * + * Side effects: + * Moves the location at which the channel will be accessed in future + * operations. + * + *---------------------------------------------------------------------- + */ + +static Tcl_WideInt +FileWideSeekProc( + ClientData instanceData, /* File state. */ + Tcl_WideInt offset, /* Offset to seek to. */ + int mode, /* Relative to where should we seek? Can be + * one of SEEK_START, SEEK_CUR or SEEK_END. */ + int *errorCodePtr) /* To store error code. */ +{ + FileState *fsPtr = instanceData; + Tcl_WideInt newLoc; + + newLoc = TclOSseek(fsPtr->fd, (Tcl_SeekOffset) offset, mode); *errorCodePtr = (newLoc == -1) ? errno : 0; return newLoc; @@ -535,25 +463,24 @@ FileSeekProc(instanceData, offset, mode, errorCodePtr) */ static void -FileWatchProc(instanceData, mask) - ClientData instanceData; /* The file state. */ - int mask; /* Events of interest; an OR-ed - * combination of TCL_READABLE, - * TCL_WRITABLE and TCL_EXCEPTION. */ +FileWatchProc( + ClientData instanceData, /* The file state. */ + int mask) /* Events of interest; an OR-ed combination of + * TCL_READABLE, TCL_WRITABLE and + * TCL_EXCEPTION. */ { - FileState *fsPtr = (FileState *) instanceData; + FileState *fsPtr = instanceData; /* - * Make sure we only register for events that are valid on this file. - * Note that we are passing Tcl_NotifyChannel directly to - * Tcl_CreateFileHandler with the channel pointer as the client data. + * Make sure we only register for events that are valid on this file. Note + * that we are passing Tcl_NotifyChannel directly to Tcl_CreateFileHandler + * with the channel pointer as the client data. */ mask &= fsPtr->validMask; if (mask) { Tcl_CreateFileHandler(fsPtr->fd, mask, - (Tcl_FileProc *) Tcl_NotifyChannel, - (ClientData) fsPtr->channel); + (Tcl_FileProc *) Tcl_NotifyChannel, fsPtr->channel); } else { Tcl_DeleteFileHandler(fsPtr->fd); } @@ -564,12 +491,12 @@ FileWatchProc(instanceData, mask) * * FileGetHandleProc -- * - * Called from Tcl_GetChannelHandle to retrieve OS handles from - * a file based channel. + * Called from Tcl_GetChannelHandle to retrieve OS handles from a file + * based channel. * * Results: - * Returns TCL_OK with the fd in handlePtr, or TCL_ERROR if - * there is no handle for the specified direction. + * Returns TCL_OK with the fd in handlePtr, or TCL_ERROR if there is no + * handle for the specified direction. * * Side effects: * None. @@ -578,50 +505,52 @@ FileWatchProc(instanceData, mask) */ static int -FileGetHandleProc(instanceData, direction, handlePtr) - ClientData instanceData; /* The file state. */ - int direction; /* TCL_READABLE or TCL_WRITABLE */ - ClientData *handlePtr; /* Where to store the handle. */ +FileGetHandleProc( + ClientData instanceData, /* The file state. */ + int direction, /* TCL_READABLE or TCL_WRITABLE */ + ClientData *handlePtr) /* Where to store the handle. */ { - FileState *fsPtr = (FileState *) instanceData; + FileState *fsPtr = instanceData; if (direction & fsPtr->validMask) { - *handlePtr = (ClientData) fsPtr->fd; + *handlePtr = INT2PTR(fsPtr->fd); return TCL_OK; - } else { - return TCL_ERROR; } + return TCL_ERROR; } - -#ifdef SUPPORTS_TTY +#ifdef SUPPORTS_TTY /* *---------------------------------------------------------------------- * - * TtyCloseProc -- + * TtyModemStatusStr -- * - * This procedure is called from the generic IO level to perform - * channel-type-specific cleanup when a tty based channel is closed. - * - * Results: - * 0 if successful, errno if failed. - * - * Side effects: - * Restores the settings and closes the device of the channel. + * Converts a RS232 modem status list of readable flags * *---------------------------------------------------------------------- */ -static int -TtyCloseProc(instanceData, interp) - ClientData instanceData; /* Tty state. */ - Tcl_Interp *interp; /* For error reporting - unused. */ +static void +TtyModemStatusStr( + int status, /* RS232 modem status */ + Tcl_DString *dsPtr) /* Where to store string */ { - TtyState *ttyPtr; - - ttyPtr = (TtyState *) instanceData; - SETIOSTATE(ttyPtr->fs.fd, &ttyPtr->savedState); - return FileCloseProc(instanceData, interp); +#ifdef TIOCM_CTS + Tcl_DStringAppendElement(dsPtr, "CTS"); + Tcl_DStringAppendElement(dsPtr, (status & TIOCM_CTS) ? "1" : "0"); +#endif /* TIOCM_CTS */ +#ifdef TIOCM_DSR + Tcl_DStringAppendElement(dsPtr, "DSR"); + Tcl_DStringAppendElement(dsPtr, (status & TIOCM_DSR) ? "1" : "0"); +#endif /* TIOCM_DSR */ +#ifdef TIOCM_RNG + Tcl_DStringAppendElement(dsPtr, "RING"); + Tcl_DStringAppendElement(dsPtr, (status & TIOCM_RNG) ? "1" : "0"); +#endif /* TIOCM_RNG */ +#ifdef TIOCM_CD + Tcl_DStringAppendElement(dsPtr, "DCD"); + Tcl_DStringAppendElement(dsPtr, (status & TIOCM_CD) ? "1" : "0"); +#endif /* TIOCM_CD */ } /* @@ -636,38 +565,219 @@ TtyCloseProc(instanceData, interp) * interp is not NULL. * * Side effects: - * May modify an option on a device. - * Sets Error message if needed (by calling Tcl_BadChannelOption). + * May modify an option on a device. Sets Error message if needed (by + * calling Tcl_BadChannelOption). * *---------------------------------------------------------------------- */ -static int -TtySetOptionProc(instanceData, interp, optionName, value) - ClientData instanceData; /* File state. */ - Tcl_Interp *interp; /* For error reporting - can be NULL. */ - char *optionName; /* Which option to set? */ - char *value; /* New value for option. */ +static int +TtySetOptionProc( + ClientData instanceData, /* File state. */ + Tcl_Interp *interp, /* For error reporting - can be NULL. */ + const char *optionName, /* Which option to set? */ + const char *value) /* New value for option. */ { - FileState *fsPtr = (FileState *) instanceData; - unsigned int len; + FileState *fsPtr = instanceData; + unsigned int len, vlen; TtyAttrs tty; + int argc; + const char **argv; + struct termios iostate; len = strlen(optionName); - if ((len > 1) && (strncmp(optionName, "-mode", len) == 0)) { - if (TtyParseMode(interp, value, &tty.baud, &tty.parity, &tty.data, - &tty.stop) != TCL_OK) { + vlen = strlen(value); + + /* + * Option -mode baud,parity,databits,stopbits + */ + + if ((len > 2) && (strncmp(optionName, "-mode", len) == 0)) { + if (TtyParseMode(interp, value, &tty) != TCL_OK) { return TCL_ERROR; } + /* - * system calls results should be checked there. -- dl + * system calls results should be checked there. - dl */ TtySetAttributes(fsPtr->fd, &tty); return TCL_OK; - } else { - return Tcl_BadChannelOption(interp, optionName, "mode"); } + + + /* + * Option -handshake none|xonxoff|rtscts|dtrdsr + */ + + if ((len > 1) && (strncmp(optionName, "-handshake", len) == 0)) { + /* + * Reset all handshake options. DTR and RTS are ON by default. + */ + + tcgetattr(fsPtr->fd, &iostate); + CLEAR_BITS(iostate.c_iflag, IXON | IXOFF | IXANY); +#ifdef CRTSCTS + CLEAR_BITS(iostate.c_cflag, CRTSCTS); +#endif /* CRTSCTS */ + if (Tcl_UtfNcasecmp(value, "NONE", vlen) == 0) { + /* + * Leave all handshake options disabled. + */ + } else if (Tcl_UtfNcasecmp(value, "XONXOFF", vlen) == 0) { + SET_BITS(iostate.c_iflag, IXON | IXOFF | IXANY); + } else if (Tcl_UtfNcasecmp(value, "RTSCTS", vlen) == 0) { +#ifdef CRTSCTS + SET_BITS(iostate.c_cflag, CRTSCTS); +#else /* !CRTSTS */ + UNSUPPORTED_OPTION("-handshake RTSCTS"); + return TCL_ERROR; +#endif /* CRTSCTS */ + } else if (Tcl_UtfNcasecmp(value, "DTRDSR", vlen) == 0) { + UNSUPPORTED_OPTION("-handshake DTRDSR"); + return TCL_ERROR; + } else { + if (interp) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "bad value for -handshake: must be one of" + " xonxoff, rtscts, dtrdsr or none", -1)); + Tcl_SetErrorCode(interp, "TCL", "OPERATION", "FCONFIGURE", + "VALUE", NULL); + } + return TCL_ERROR; + } + tcsetattr(fsPtr->fd, TCSADRAIN, &iostate); + return TCL_OK; + } + + /* + * Option -xchar {\x11 \x13} + */ + + if ((len > 1) && (strncmp(optionName, "-xchar", len) == 0)) { + Tcl_DString ds; + + if (Tcl_SplitList(interp, value, &argc, &argv) == TCL_ERROR) { + return TCL_ERROR; + } else if (argc != 2) { + if (interp) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "bad value for -xchar: should be a list of" + " two elements", -1)); + Tcl_SetErrorCode(interp, "TCL", "OPERATION", "FCONFIGURE", + "VALUE", NULL); + } + ckfree(argv); + return TCL_ERROR; + } + + tcgetattr(fsPtr->fd, &iostate); + + Tcl_UtfToExternalDString(NULL, argv[0], -1, &ds); + iostate.c_cc[VSTART] = *(const cc_t *) Tcl_DStringValue(&ds); + TclDStringClear(&ds); + + Tcl_UtfToExternalDString(NULL, argv[1], -1, &ds); + iostate.c_cc[VSTOP] = *(const cc_t *) Tcl_DStringValue(&ds); + Tcl_DStringFree(&ds); + ckfree(argv); + + tcsetattr(fsPtr->fd, TCSADRAIN, &iostate); + return TCL_OK; + } + + /* + * Option -timeout msec + */ + + if ((len > 2) && (strncmp(optionName, "-timeout", len) == 0)) { + int msec; + + tcgetattr(fsPtr->fd, &iostate); + if (Tcl_GetInt(interp, value, &msec) != TCL_OK) { + return TCL_ERROR; + } + iostate.c_cc[VMIN] = 0; + iostate.c_cc[VTIME] = (msec==0) ? 0 : (msec<100) ? 1 : (msec+50)/100; + tcsetattr(fsPtr->fd, TCSADRAIN, &iostate); + return TCL_OK; + } + + /* + * Option -ttycontrol {DTR 1 RTS 0 BREAK 0} + */ + if ((len > 4) && (strncmp(optionName, "-ttycontrol", len) == 0)) { +#if defined(TIOCMGET) && defined(TIOCMSET) + int i, control, flag; + + if (Tcl_SplitList(interp, value, &argc, &argv) == TCL_ERROR) { + return TCL_ERROR; + } + if ((argc % 2) == 1) { + if (interp) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "bad value for -ttycontrol: should be a list of" + " signal,value pairs", -1)); + Tcl_SetErrorCode(interp, "TCL", "OPERATION", "FCONFIGURE", + "VALUE", NULL); + } + ckfree(argv); + return TCL_ERROR; + } + + ioctl(fsPtr->fd, TIOCMGET, &control); + for (i = 0; i < argc-1; i += 2) { + if (Tcl_GetBoolean(interp, argv[i+1], &flag) == TCL_ERROR) { + ckfree(argv); + return TCL_ERROR; + } + if (Tcl_UtfNcasecmp(argv[i], "DTR", strlen(argv[i])) == 0) { + if (flag) { + SET_BITS(control, TIOCM_DTR); + } else { + CLEAR_BITS(control, TIOCM_DTR); + } + } else if (Tcl_UtfNcasecmp(argv[i], "RTS", strlen(argv[i])) == 0) { + if (flag) { + SET_BITS(control, TIOCM_RTS); + } else { + CLEAR_BITS(control, TIOCM_RTS); + } + } else if (Tcl_UtfNcasecmp(argv[i], "BREAK", strlen(argv[i])) == 0) { +#if defined(TIOCSBRK) && defined(TIOCCBRK) + if (flag) { + ioctl(fsPtr->fd, TIOCSBRK, NULL); + } else { + ioctl(fsPtr->fd, TIOCCBRK, NULL); + } +#else /* TIOCSBRK & TIOCCBRK */ + UNSUPPORTED_OPTION("-ttycontrol BREAK"); + ckfree(argv); + return TCL_ERROR; +#endif /* TIOCSBRK & TIOCCBRK */ + } else { + if (interp) { + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "bad signal \"%s\" for -ttycontrol: must be" + " DTR, RTS or BREAK", argv[i])); + Tcl_SetErrorCode(interp, "TCL", "OPERATION", "FCONFIGURE", + "VALUE", NULL); + } + ckfree(argv); + return TCL_ERROR; + } + } /* -ttycontrol options loop */ + + ioctl(fsPtr->fd, TIOCMSET, &control); + ckfree(argv); + return TCL_OK; +#else /* TIOCMGET&TIOCMSET */ + UNSUPPORTED_OPTION("-ttycontrol"); +#endif /* TIOCMGET&TIOCMSET */ + } + + return Tcl_BadChannelOption(interp, optionName, + "mode handshake timeout ttycontrol xchar"); } /* @@ -675,65 +785,122 @@ TtySetOptionProc(instanceData, interp, optionName, value) * * TtyGetOptionProc -- * - * Gets a mode associated with an IO channel. If the optionName arg - * is non NULL, retrieves the value of that option. If the optionName - * arg is NULL, retrieves a list of alternating option names and - * values for the given channel. + * Gets a mode associated with an IO channel. If the optionName arg is + * non-NULL, retrieves the value of that option. If the optionName arg is + * NULL, retrieves a list of alternating option names and values for the + * given channel. * * Results: - * A standard Tcl result. Also sets the supplied DString to the - * string value of the option(s) returned. - * - * Side effects: - * The string returned by this function is in static storage and - * may be reused at any time subsequent to the call. - * Sets Error message if needed (by calling Tcl_BadChannelOption). + * A standard Tcl result. Also sets the supplied DString to the string + * value of the option(s) returned. Sets error message if needed + * (by calling Tcl_BadChannelOption). * *---------------------------------------------------------------------- */ -static int -TtyGetOptionProc(instanceData, interp, optionName, dsPtr) - ClientData instanceData; /* File state. */ - Tcl_Interp *interp; /* For error reporting - can be NULL. */ - char *optionName; /* Option to get. */ - Tcl_DString *dsPtr; /* Where to store value(s). */ +static int +TtyGetOptionProc( + ClientData instanceData, /* File state. */ + Tcl_Interp *interp, /* For error reporting - can be NULL. */ + const char *optionName, /* Option to get. */ + Tcl_DString *dsPtr) /* Where to store value(s). */ { - FileState *fsPtr = (FileState *) instanceData; + FileState *fsPtr = instanceData; unsigned int len; - char buf[3 * TCL_INTEGER_SPACE + 16]; - TtyAttrs tty; + char buf[3*TCL_INTEGER_SPACE + 16]; + int valid = 0; /* Flag if valid option parsed. */ if (optionName == NULL) { - Tcl_DStringAppendElement(dsPtr, "-mode"); len = 0; } else { len = strlen(optionName); } - if ((len == 0) || - ((len > 1) && (strncmp(optionName, "-mode", len) == 0))) { + if (len == 0) { + Tcl_DStringAppendElement(dsPtr, "-mode"); + } + if (len==0 || (len>2 && strncmp(optionName, "-mode", len)==0)) { + TtyAttrs tty; + + valid = 1; TtyGetAttributes(fsPtr->fd, &tty); sprintf(buf, "%d,%c,%d,%d", tty.baud, tty.parity, tty.data, tty.stop); Tcl_DStringAppendElement(dsPtr, buf); + } + + /* + * Get option -xchar + */ + + if (len == 0) { + Tcl_DStringAppendElement(dsPtr, "-xchar"); + Tcl_DStringStartSublist(dsPtr); + } + if (len==0 || (len>1 && strncmp(optionName, "-xchar", len)==0)) { + struct termios iostate; + Tcl_DString ds; + + valid = 1; + tcgetattr(fsPtr->fd, &iostate); + Tcl_DStringInit(&ds); + + Tcl_ExternalToUtfDString(NULL, (char *) &iostate.c_cc[VSTART], 1, &ds); + Tcl_DStringAppendElement(dsPtr, Tcl_DStringValue(&ds)); + TclDStringClear(&ds); + + Tcl_ExternalToUtfDString(NULL, (char *) &iostate.c_cc[VSTOP], 1, &ds); + Tcl_DStringAppendElement(dsPtr, Tcl_DStringValue(&ds)); + Tcl_DStringFree(&ds); + } + if (len == 0) { + Tcl_DStringEndSublist(dsPtr); + } + + /* + * Get option -queue + * Option is readonly and returned by [fconfigure chan -queue] but not + * returned by unnamed [fconfigure chan]. + */ + + if ((len > 1) && (strncmp(optionName, "-queue", len) == 0)) { + int inQueue=0, outQueue=0, inBuffered, outBuffered; + + valid = 1; + GETREADQUEUE(fsPtr->fd, inQueue); + GETWRITEQUEUE(fsPtr->fd, outQueue); + inBuffered = Tcl_InputBuffered(fsPtr->channel); + outBuffered = Tcl_OutputBuffered(fsPtr->channel); + + sprintf(buf, "%d", inBuffered+inQueue); + Tcl_DStringAppendElement(dsPtr, buf); + sprintf(buf, "%d", outBuffered+outQueue); + Tcl_DStringAppendElement(dsPtr, buf); + } + +#if defined(TIOCMGET) + /* + * Get option -ttystatus + * Option is readonly and returned by [fconfigure chan -ttystatus] but not + * returned by unnamed [fconfigure chan]. + */ + if ((len > 4) && (strncmp(optionName, "-ttystatus", len) == 0)) { + int status; + + valid = 1; + ioctl(fsPtr->fd, TIOCMGET, &status); + TtyModemStatusStr(status, dsPtr); + } +#endif /* TIOCMGET */ + + if (valid) { return TCL_OK; - } else { - return Tcl_BadChannelOption(interp, optionName, "mode"); } + return Tcl_BadChannelOption(interp, optionName, "mode" + " queue ttystatus xchar" + ); } -#undef DIRECT_BAUD -#ifdef B4800 -# if (B4800 == 4800) -# define DIRECT_BAUD -# endif -#endif - -#ifdef DIRECT_BAUD -# define TtyGetSpeed(baud) ((unsigned) (baud)) -# define TtyGetBaud(speed) ((int) (speed)) -#else -static struct {int baud; unsigned long speed;} speeds[] = { +static const struct {int baud; speed_t speed;} speeds[] = { #ifdef B0 {0, B0}, #endif @@ -829,32 +996,28 @@ static struct {int baud; unsigned long speed;} speeds[] = { * * TtyGetSpeed -- * - * Given a baud rate, get the mask value that should be stored in - * the termios, termio, or sgttyb structure in order to select that - * baud rate. + * Given an integer baud rate, get the speed_t value that should be + * used to select that baud rate. * * Results: * As above. * - * Side effects: - * None. - * *--------------------------------------------------------------------------- */ -static unsigned long -TtyGetSpeed(baud) - int baud; /* The baud rate to look up. */ +static speed_t +TtyGetSpeed( + int baud) /* The baud rate to look up. */ { int bestIdx, bestDiff, i, diff; - + bestIdx = 0; bestDiff = 1000000; - + /* * If the baud rate does not correspond to one of the known mask values, - * choose the mask value whose baud rate is closest to the specified - * baud rate. + * choose the mask value whose baud rate is closest to the specified baud + * rate. */ for (i = 0; speeds[i].baud >= 0; i++) { @@ -875,24 +1038,20 @@ TtyGetSpeed(baud) * * TtyGetBaud -- * - * Given a speed mask value from a termios, termio, or sgttyb - * structure, get the baus rate that corresponds to that mask value. + * Return the integer baud rate corresponding to a given speed_t value. * * Results: - * As above. If the mask value was not recognized, 0 is returned. - * - * Side effects: - * None. + * As above. If the mask value was not recognized, 0 is returned. * *--------------------------------------------------------------------------- */ static int -TtyGetBaud(speed) - unsigned long speed; /* Speed mask value to look up. */ +TtyGetBaud( + speed_t speed) /* Speed mask value to look up. */ { int i; - + for (i = 0; speeds[i].baud >= 0; i++) { if (speeds[i].speed == speed) { return speeds[i].baud; @@ -900,9 +1059,6 @@ TtyGetBaud(speed) } return 0; } - -#endif /* !DIRECT_BAUD */ - /* *--------------------------------------------------------------------------- @@ -919,74 +1075,40 @@ TtyGetBaud(speed) * *--------------------------------------------------------------------------- */ - + static void -TtyGetAttributes(fd, ttyPtr) - int fd; /* Open file descriptor for serial port to - * be queried. */ - TtyAttrs *ttyPtr; /* Buffer filled with serial port +TtyGetAttributes( + int fd, /* Open file descriptor for serial port to be + * queried. */ + TtyAttrs *ttyPtr) /* Buffer filled with serial port * attributes. */ { - IOSTATE iostate; + struct termios iostate; int baud, parity, data, stop; - GETIOSTATE(fd, &iostate); + tcgetattr(fd, &iostate); -#ifdef USE_TERMIOS baud = TtyGetBaud(cfgetospeed(&iostate)); - + parity = 'n'; #ifdef PAREXT switch ((int) (iostate.c_cflag & (PARENB | PARODD | PAREXT))) { - case PARENB : parity = 'e'; break; - case PARENB | PARODD : parity = 'o'; break; - case PARENB | PAREXT : parity = 's'; break; - case PARENB | PARODD | PAREXT : parity = 'm'; break; + case PARENB : parity = 'e'; break; + case PARENB | PARODD : parity = 'o'; break; + case PARENB | PAREXT : parity = 's'; break; + case PARENB | PARODD | PAREXT : parity = 'm'; break; } -#else /* !PAREXT */ +#else /* !PAREXT */ switch ((int) (iostate.c_cflag & (PARENB | PARODD))) { - case PARENB : parity = 'e'; break; - case PARENB | PARODD : parity = 'o'; break; - } -#endif /* !PAREXT */ - - data = iostate.c_cflag & CSIZE; - data = (data == CS5) ? 5 : (data == CS6) ? 6 : (data == CS7) ? 7 : 8; - - stop = (iostate.c_cflag & CSTOPB) ? 2 : 1; -#endif /* USE_TERMIOS */ - -#ifdef USE_TERMIO - baud = TtyGetBaud(iostate.c_cflag & CBAUD); - - parity = 'n'; - switch (iostate.c_cflag & (PARENB | PARODD | PAREXT)) { - case PARENB : parity = 'e'; break; - case PARENB | PARODD : parity = 'o'; break; - case PARENB | PAREXT : parity = 's'; break; - case PARENB | PARODD | PAREXT : parity = 'm'; break; + case PARENB : parity = 'e'; break; + case PARENB | PARODD : parity = 'o'; break; } +#endif /* PAREXT */ data = iostate.c_cflag & CSIZE; data = (data == CS5) ? 5 : (data == CS6) ? 6 : (data == CS7) ? 7 : 8; stop = (iostate.c_cflag & CSTOPB) ? 2 : 1; -#endif /* USE_TERMIO */ - -#ifdef USE_SGTTY - baud = TtyGetBaud(iostate.sg_ospeed); - - parity = 'n'; - if (iostate.sg_flags & EVENP) { - parity = 'e'; - } else if (iostate.sg_flags & ODDP) { - parity = 'o'; - } - - data = (iostate.sg_flags & (EVENP | ODDP)) ? 7 : 8; - - stop = 1; -#endif /* USE_SGTTY */ ttyPtr->baud = baud; ttyPtr->parity = parity; @@ -999,7 +1121,7 @@ TtyGetAttributes(fd, ttyPtr) * * TtySetAttributes -- * - * Set the current attributes of the specified serial device. + * Set the current attributes of the specified serial device. * * Results: * None. @@ -1009,95 +1131,48 @@ TtyGetAttributes(fd, ttyPtr) * *--------------------------------------------------------------------------- */ - + static void -TtySetAttributes(fd, ttyPtr) - int fd; /* Open file descriptor for serial port to - * be modified. */ - TtyAttrs *ttyPtr; /* Buffer containing new attributes for - * serial port. */ +TtySetAttributes( + int fd, /* Open file descriptor for serial port to be + * modified. */ + TtyAttrs *ttyPtr) /* Buffer containing new attributes for serial + * port. */ { - IOSTATE iostate; - -#ifdef USE_TERMIOS + struct termios iostate; int parity, data, flag; - GETIOSTATE(fd, &iostate); + tcgetattr(fd, &iostate); cfsetospeed(&iostate, TtyGetSpeed(ttyPtr->baud)); cfsetispeed(&iostate, TtyGetSpeed(ttyPtr->baud)); flag = 0; parity = ttyPtr->parity; if (parity != 'n') { - flag |= PARENB; + SET_BITS(flag, PARENB); #ifdef PAREXT - iostate.c_cflag &= ~PAREXT; - if ((parity == 'm') || (parity == 's')) { - flag |= PAREXT; - } -#endif - if ((parity == 'm') || (parity == 'o')) { - flag |= PARODD; - } - } - data = ttyPtr->data; - flag |= (data == 5) ? CS5 : (data == 6) ? CS6 : (data == 7) ? CS7 : CS8; - if (ttyPtr->stop == 2) { - flag |= CSTOPB; - } - - iostate.c_cflag &= ~(PARENB | PARODD | CSIZE | CSTOPB); - iostate.c_cflag |= flag; - -#endif /* USE_TERMIOS */ - -#ifdef USE_TERMIO - int parity, data, flag; - - GETIOSTATE(fd, &iostate); - iostate.c_cflag &= ~CBAUD; - iostate.c_cflag |= TtyGetSpeed(ttyPtr->baud); - - flag = 0; - parity = ttyPtr->parity; - if (parity != 'n') { - flag |= PARENB; + CLEAR_BITS(iostate.c_cflag, PAREXT); if ((parity == 'm') || (parity == 's')) { - flag |= PAREXT; + SET_BITS(flag, PAREXT); } +#endif /* PAREXT */ if ((parity == 'm') || (parity == 'o')) { - flag |= PARODD; + SET_BITS(flag, PARODD); } } data = ttyPtr->data; - flag |= (data == 5) ? CS5 : (data == 6) ? CS6 : (data == 7) ? CS7 : CS8; + SET_BITS(flag, + (data == 5) ? CS5 : + (data == 6) ? CS6 : + (data == 7) ? CS7 : CS8); if (ttyPtr->stop == 2) { - flag |= CSTOPB; + SET_BITS(flag, CSTOPB); } - iostate.c_cflag &= ~(PARENB | PARODD | PAREXT | CSIZE | CSTOPB); - iostate.c_cflag |= flag; - -#endif /* USE_TERMIO */ - -#ifdef USE_SGTTY - int parity; + CLEAR_BITS(iostate.c_cflag, PARENB | PARODD | CSIZE | CSTOPB); + SET_BITS(iostate.c_cflag, flag); - GETIOSTATE(fd, &iostate); - iostate.sg_ospeed = TtyGetSpeed(ttyPtr->baud); - iostate.sg_ispeed = TtyGetSpeed(ttyPtr->baud); - - parity = ttyPtr->parity; - if (parity == 'e') { - iostate.sg_flags &= ~ODDP; - iostate.sg_flags |= EVENP; - } else if (parity == 'o') { - iostate.sg_flags &= ~EVENP; - iostate.sg_flags |= ODDP; - } -#endif /* USE_SGTTY */ - - SETIOSTATE(fd, &iostate); + tcsetattr(fd, TCSADRAIN, &iostate); } /* @@ -1105,76 +1180,84 @@ TtySetAttributes(fd, ttyPtr) * * TtyParseMode -- * - * Parse the "-mode" argument to the fconfigure command. The argument - * is of the form baud,parity,data,stop. + * Parse the "-mode" argument to the fconfigure command. The argument is + * of the form baud,parity,data,stop. * * Results: - * The return value is TCL_OK if the argument was successfully - * parsed, TCL_ERROR otherwise. If TCL_ERROR is returned, an - * error message is left in the interp's result (if interp is non-NULL). - * - * Side effects: - * None. + * The return value is TCL_OK if the argument was successfully parsed, + * TCL_ERROR otherwise. If TCL_ERROR is returned, an error message is + * left in the interp's result (if interp is non-NULL). * *--------------------------------------------------------------------------- */ - + static int -TtyParseMode(interp, mode, speedPtr, parityPtr, dataPtr, stopPtr) - Tcl_Interp *interp; /* If non-NULL, interp for error return. */ - CONST char *mode; /* Mode string to be parsed. */ - int *speedPtr; /* Filled with baud rate from mode string. */ - int *parityPtr; /* Filled with parity from mode string. */ - int *dataPtr; /* Filled with data bits from mode string. */ - int *stopPtr; /* Filled with stop bits from mode string. */ +TtyParseMode( + Tcl_Interp *interp, /* If non-NULL, interp for error return. */ + const char *mode, /* Mode string to be parsed. */ + TtyAttrs *ttyPtr) /* Filled with data from mode string */ { int i, end; char parity; - static char *bad = "bad value for -mode"; + const char *bad = "bad value for -mode"; - i = sscanf(mode, "%d,%c,%d,%d%n", speedPtr, &parity, dataPtr, - stopPtr, &end); + i = sscanf(mode, "%d,%c,%d,%d%n", + &ttyPtr->baud, + &parity, + &ttyPtr->data, + &ttyPtr->stop, &end); if ((i != 4) || (mode[end] != '\0')) { if (interp != NULL) { - Tcl_AppendResult(interp, bad, ": should be baud,parity,data,stop", - NULL); + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "%s: should be baud,parity,data,stop", bad)); + Tcl_SetErrorCode(interp, "TCL", "VALUE", "SERIALMODE", NULL); } return TCL_ERROR; } + /* - * Only allow setting mark/space parity on platforms that support it - * Make sure to allow for the case where strchr is a macro. - * [Bug: 5089] + * Only allow setting mark/space parity on platforms that support it Make + * sure to allow for the case where strchr is a macro. [Bug: 5089] + * + * We cannot if/else/endif the strchr arguments, it has to be the whole + * function. On AIX this function is apparently a macro, and macros do + * not allow pre-processor directives in their arguments. */ + if ( -#if defined(PAREXT) || defined(USE_TERMIO) - strchr("noems", parity) == NULL +#if defined(PAREXT) + strchr("noems", parity) #else - strchr("noe", parity) == NULL -#endif - ) { + strchr("noe", parity) +#endif /* PAREXT */ + == NULL) { if (interp != NULL) { - Tcl_AppendResult(interp, bad, -#if defined(PAREXT) || defined(USE_TERMIO) - " parity: should be n, o, e, m, or s", + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "%s parity: should be %s", bad, +#if defined(PAREXT) + "n, o, e, m, or s" #else - " parity: should be n, o, or e", -#endif - NULL); + "n, o, or e" +#endif /* PAREXT */ + )); + Tcl_SetErrorCode(interp, "TCL", "VALUE", "SERIALMODE", NULL); } return TCL_ERROR; } - *parityPtr = parity; - if ((*dataPtr < 5) || (*dataPtr > 8)) { + ttyPtr->parity = parity; + if ((ttyPtr->data < 5) || (ttyPtr->data > 8)) { if (interp != NULL) { - Tcl_AppendResult(interp, bad, " data: should be 5, 6, 7, or 8", - NULL); + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "%s data: should be 5, 6, 7, or 8", bad)); + Tcl_SetErrorCode(interp, "TCL", "VALUE", "SERIALMODE", NULL); } return TCL_ERROR; } - if ((*stopPtr < 0) || (*stopPtr > 2)) { + if ((ttyPtr->stop < 0) || (ttyPtr->stop > 2)) { if (interp != NULL) { - Tcl_AppendResult(interp, bad, " stop: should be 1 or 2", NULL); + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "%s stop: should be 1 or 2", bad)); + Tcl_SetErrorCode(interp, "TCL", "VALUE", "SERIALMODE", NULL); } return TCL_ERROR; } @@ -1186,59 +1269,40 @@ TtyParseMode(interp, mode, speedPtr, parityPtr, dataPtr, stopPtr) * * TtyInit -- * - * Given file descriptor that refers to a serial port, - * initialize the serial port to a set of sane values so that - * Tcl can talk to a device located on the serial port. - * - * Results: - * None. + * Given file descriptor that refers to a serial port, initialize the + * serial port to a set of sane values so that Tcl can talk to a device + * located on the serial port. * * Side effects: - * Serial device initialized to non-blocking raw mode, similar to - * sockets. All other modes can be simulated on top of this in Tcl. + * Serial device initialized to non-blocking raw mode, similar to sockets + * All other modes can be simulated on top of this in Tcl. * *--------------------------------------------------------------------------- */ -static FileState * -TtyInit(fd) - int fd; /* Open file descriptor for serial port to - * be initialized. */ +static void +TtyInit( + int fd) /* Open file descriptor for serial port to be initialized. */ { - IOSTATE iostate; - TtyState *ttyPtr; - - ttyPtr = (TtyState *) ckalloc((unsigned) sizeof(TtyState)); - GETIOSTATE(fd, &ttyPtr->savedState); - - iostate = ttyPtr->savedState; - -#ifdef USE_TERMIOS - iostate.c_iflag = IGNBRK; - iostate.c_oflag = 0; - iostate.c_lflag = 0; - iostate.c_cflag |= CREAD; - iostate.c_cc[VMIN] = 1; - iostate.c_cc[VTIME] = 0; -#endif /* USE_TERMIOS */ - -#ifdef USE_TERMIO - iostate.c_iflag = IGNBRK; - iostate.c_oflag = 0; - iostate.c_lflag = 0; - iostate.c_cflag |= CREAD; - iostate.c_cc[VMIN] = 1; - iostate.c_cc[VTIME] = 0; -#endif /* USE_TERMIO */ - -#ifdef USE_SGTTY - iostate.sg_flags &= (EVENP | ODDP); - iostate.sg_flags |= RAW; -#endif /* USE_SGTTY */ - - SETIOSTATE(fd, &iostate); - - return &ttyPtr->fs; + struct termios iostate; + tcgetattr(fd, &iostate); + + if (iostate.c_iflag != IGNBRK + || iostate.c_oflag != 0 + || iostate.c_lflag != 0 + || iostate.c_cflag & CREAD + || iostate.c_cc[VMIN] != 1 + || iostate.c_cc[VTIME] != 0) + { + iostate.c_iflag = IGNBRK; + iostate.c_oflag = 0; + iostate.c_lflag = 0; + iostate.c_cflag |= CREAD; + iostate.c_cc[VMIN] = 1; + iostate.c_cc[VTIME] = 0; + + tcsetattr(fd, TCSADRAIN, &iostate); + } } #endif /* SUPPORTS_TTY */ @@ -1250,137 +1314,122 @@ TtyInit(fd) * Open an file based channel on Unix systems. * * Results: - * The new channel or NULL. If NULL, the output argument - * errorCodePtr is set to a POSIX error and an error message is - * left in the interp's result if interp is not NULL. + * The new channel or NULL. If NULL, the output argument errorCodePtr is + * set to a POSIX error and an error message is left in the interp's + * result if interp is not NULL. * * Side effects: - * May open the channel and may cause creation of a file on the - * file system. + * May open the channel and may cause creation of a file on the file + * system. * *---------------------------------------------------------------------- */ Tcl_Channel -TclpOpenFileChannel(interp, fileName, modeString, permissions) - Tcl_Interp *interp; /* Interpreter for error reporting; - * can be NULL. */ - char *fileName; /* Name of file to open. */ - char *modeString; /* A list of POSIX open modes or - * a string such as "rw". */ - int permissions; /* If the open involves creating a - * file, with what modes to create - * it? */ +TclpOpenFileChannel( + Tcl_Interp *interp, /* Interpreter for error reporting; can be + * NULL. */ + Tcl_Obj *pathPtr, /* Name of file to open. */ + int mode, /* POSIX open mode. */ + int permissions) /* If the open involves creating a file, with + * what modes to create it? */ { - int fd, seekFlag, mode, channelPermissions; + int fd, channelPermissions; FileState *fsPtr; - char *native, *translation; + const char *native, *translation; char channelName[16 + TCL_INTEGER_SPACE]; - Tcl_DString ds, buffer; - Tcl_ChannelType *channelTypePtr; -#ifdef DEPRECATED - ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); -#endif + const Tcl_ChannelType *channelTypePtr; - mode = TclGetOpenMode(interp, modeString, &seekFlag); - if (mode == -1) { - return NULL; - } switch (mode & (O_RDONLY | O_WRONLY | O_RDWR)) { - case O_RDONLY: - channelPermissions = TCL_READABLE; - break; - case O_WRONLY: - channelPermissions = TCL_WRITABLE; - break; - case O_RDWR: - channelPermissions = (TCL_READABLE | TCL_WRITABLE); - break; - default: - /* - * This may occurr if modeString was "", for example. - */ - panic("TclpOpenFileChannel: invalid mode value"); - return NULL; + case O_RDONLY: + channelPermissions = TCL_READABLE; + break; + case O_WRONLY: + channelPermissions = TCL_WRITABLE; + break; + case O_RDWR: + channelPermissions = (TCL_READABLE | TCL_WRITABLE); + break; + default: + /* + * This may occurr if modeString was "", for example. + */ + + Tcl_Panic("TclpOpenFileChannel: invalid mode value"); + return NULL; } - native = Tcl_TranslateFileName(interp, fileName, &buffer); + native = Tcl_FSGetNativePath(pathPtr); if (native == NULL) { return NULL; } - native = Tcl_UtfToExternalDString(NULL, native, -1, &ds); - fd = open(native, mode, permissions); /* INTL: Native. */ - Tcl_DStringFree(&ds); - Tcl_DStringFree(&buffer); + +#ifdef DJGPP + SET_BITS(mode, O_BINARY); +#endif + + fd = TclOSopen(native, mode, permissions); if (fd < 0) { - if (interp != (Tcl_Interp *) NULL) { - Tcl_AppendResult(interp, "couldn't open \"", fileName, "\": ", - Tcl_PosixError(interp), (char *) NULL); - } - return NULL; + if (interp != NULL) { + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "couldn't open \"%s\": %s", + TclGetString(pathPtr), Tcl_PosixError(interp))); + } + return NULL; } /* * Set close-on-exec flag on the fd so that child processes will not * inherit this fd. */ - + fcntl(fd, F_SETFD, FD_CLOEXEC); - + sprintf(channelName, "file%d", fd); - + #ifdef SUPPORTS_TTY - if (isatty(fd)) { + if (strcmp(native, "/dev/tty") != 0 && isatty(fd)) { /* - * Initialize the serial port to a set of sane parameters. - * Especially important if the remote device is set to echo and - * the serial port driver was also set to echo -- as soon as a char - * were sent to the serial port, the remote device would echo it, - * then the serial driver would echo it back to the device, etc. + * Initialize the serial port to a set of sane parameters. Especially + * important if the remote device is set to echo and the serial port + * driver was also set to echo -- as soon as a char were sent to the + * serial port, the remote device would echo it, then the serial + * driver would echo it back to the device, etc. + * + * Note that we do not do this if we're dealing with /dev/tty itself, + * as that tends to cause Bad Things To Happen when you're working + * interactively. Strictly a better check would be to see if the FD + * being set up is a device and has the same major/minor as the + * initial std FDs (beware reopening!) but that's nearly as messy. */ - + translation = "auto crlf"; channelTypePtr = &ttyChannelType; - fsPtr = TtyInit(fd); - } else + TtyInit(fd); + } else #endif /* SUPPORTS_TTY */ { translation = NULL; channelTypePtr = &fileChannelType; - fsPtr = (FileState *) ckalloc((unsigned) sizeof(FileState)); } -#ifdef DEPRECATED - fsPtr->nextPtr = tsdPtr->firstFilePtr; - tsdPtr->firstFilePtr = fsPtr; -#endif + fsPtr = ckalloc(sizeof(FileState)); fsPtr->validMask = channelPermissions | TCL_EXCEPTION; fsPtr->fd = fd; - + fsPtr->channel = Tcl_CreateChannel(channelTypePtr, channelName, - (ClientData) fsPtr, channelPermissions); - - if (seekFlag) { - if (Tcl_Seek(fsPtr->channel, 0, SEEK_END) < 0) { - if (interp != (Tcl_Interp *) NULL) { - Tcl_AppendResult(interp, "couldn't seek to end of file on \"", - channelName, "\": ", Tcl_PosixError(interp), NULL); - } - Tcl_Close(NULL, fsPtr->channel); - return NULL; - } - } + fsPtr, channelPermissions); if (translation != NULL) { /* - * Gotcha. Most modems need a "\r" at the end of the command - * sequence. If you just send "at\n", the modem will not respond - * with "OK" because it never got a "\r" to actually invoke the - * command. So, by default, newlines are translated to "\r\n" on - * output to avoid "bug" reports that the serial port isn't working. + * Gotcha. Most modems need a "\r" at the end of the command sequence. + * If you just send "at\n", the modem will not respond with "OK" + * because it never got a "\r" to actually invoke the command. So, by + * default, newlines are translated to "\r\n" on output to avoid "bug" + * reports that the serial port isn't working. */ - + if (Tcl_SetChannelOption(interp, fsPtr->channel, "-translation", translation) != TCL_OK) { Tcl_Close(NULL, fsPtr->channel); @@ -1408,1093 +1457,118 @@ TclpOpenFileChannel(interp, fileName, modeString, permissions) */ Tcl_Channel -Tcl_MakeFileChannel(handle, mode) - ClientData handle; /* OS level handle. */ - int mode; /* ORed combination of TCL_READABLE and - * TCL_WRITABLE to indicate file mode. */ +Tcl_MakeFileChannel( + ClientData handle, /* OS level handle. */ + int mode) /* ORed combination of TCL_READABLE and + * TCL_WRITABLE to indicate file mode. */ { FileState *fsPtr; char channelName[16 + TCL_INTEGER_SPACE]; - int fd = (int) handle; -#ifdef DEPRECATED - ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); -#endif + int fd = PTR2INT(handle); + const Tcl_ChannelType *channelTypePtr; + struct sockaddr sockaddr; + socklen_t sockaddrLen = sizeof(sockaddr); if (mode == 0) { - return NULL; + return NULL; } - sprintf(channelName, "file%d", fd); + sockaddr.sa_family = AF_UNSPEC; - - /* - * Look to see if a channel with this fd and the same mode already exists. - * If the fd is used, but the mode doesn't match, return NULL. - */ - -#ifdef DEPRECATED - for (fsPtr = tsdPtr->firstFilePtr; fsPtr != NULL; fsPtr = fsPtr->nextPtr) { - if (fsPtr->fd == fd) { - return ((mode|TCL_EXCEPTION) == fsPtr->validMask) ? - fsPtr->channel : NULL; - } +#ifdef SUPPORTS_TTY + if (isatty(fd)) { + channelTypePtr = &ttyChannelType; + sprintf(channelName, "serial%d", fd); + } else +#endif /* SUPPORTS_TTY */ + if ((getsockname(fd, (struct sockaddr *)&sockaddr, &sockaddrLen) == 0) + && (sockaddrLen > 0) + && (sockaddr.sa_family == AF_INET || sockaddr.sa_family == AF_INET6)) { + return TclpMakeTcpClientChannelMode(INT2PTR(fd), mode); + } else { + channelTypePtr = &fileChannelType; + sprintf(channelName, "file%d", fd); } -#endif - - fsPtr = (FileState *) ckalloc((unsigned) sizeof(FileState)); -#ifdef DEPRECATED - fsPtr->nextPtr = tsdPtr->firstFilePtr; - tsdPtr->firstFilePtr = fsPtr; -#endif + fsPtr = ckalloc(sizeof(FileState)); fsPtr->fd = fd; fsPtr->validMask = mode | TCL_EXCEPTION; - fsPtr->channel = Tcl_CreateChannel(&fileChannelType, channelName, - (ClientData) fsPtr, mode); - - return fsPtr->channel; -} - -/* - *---------------------------------------------------------------------- - * - * TcpBlockModeProc -- - * - * This procedure is invoked by the generic IO level to set blocking - * and nonblocking mode on a TCP socket based channel. - * - * Results: - * 0 if successful, errno when failed. - * - * Side effects: - * Sets the device into blocking or nonblocking mode. - * - *---------------------------------------------------------------------- - */ - - /* ARGSUSED */ -static int -TcpBlockModeProc(instanceData, mode) - ClientData instanceData; /* Socket state. */ - int mode; /* The mode to set. Can be one of - * TCL_MODE_BLOCKING or - * TCL_MODE_NONBLOCKING. */ -{ - TcpState *statePtr = (TcpState *) instanceData; - int setting; - -#ifndef USE_FIONBIO - setting = fcntl(statePtr->fd, F_GETFL); - if (mode == TCL_MODE_BLOCKING) { - statePtr->flags &= (~(TCP_ASYNC_SOCKET)); - setting &= (~(O_NONBLOCK)); - } else { - statePtr->flags |= TCP_ASYNC_SOCKET; - setting |= O_NONBLOCK; - } - if (fcntl(statePtr->fd, F_SETFL, setting) < 0) { - return errno; - } -#endif - -#ifdef USE_FIONBIO - if (mode == TCL_MODE_BLOCKING) { - statePtr->flags &= (~(TCP_ASYNC_SOCKET)); - setting = 0; - if (ioctl(statePtr->fd, (int) FIONBIO, &setting) == -1) { - return errno; - } - } else { - statePtr->flags |= TCP_ASYNC_SOCKET; - setting = 1; - if (ioctl(statePtr->fd, (int) FIONBIO, &setting) == -1) { - return errno; - } - } -#endif - - return 0; -} - -/* - *---------------------------------------------------------------------- - * - * WaitForConnect -- - * - * Waits for a connection on an asynchronously opened socket to - * be completed. - * - * Results: - * None. - * - * Side effects: - * The socket is connected after this function returns. - * - *---------------------------------------------------------------------- - */ - -static int -WaitForConnect(statePtr, errorCodePtr) - TcpState *statePtr; /* State of the socket. */ - int *errorCodePtr; /* Where to store errors? */ -{ - int timeOut; /* How long to wait. */ - int state; /* Of calling TclWaitForFile. */ - int flags; /* fcntl flags for the socket. */ - - /* - * If an asynchronous connect is in progress, attempt to wait for it - * to complete before reading. - */ - - if (statePtr->flags & TCP_ASYNC_CONNECT) { - if (statePtr->flags & TCP_ASYNC_SOCKET) { - timeOut = 0; - } else { - timeOut = -1; - } - errno = 0; - state = TclUnixWaitForFile(statePtr->fd, - TCL_WRITABLE | TCL_EXCEPTION, timeOut); - if (!(statePtr->flags & TCP_ASYNC_SOCKET)) { -#ifndef USE_FIONBIO - flags = fcntl(statePtr->fd, F_GETFL); - flags &= (~(O_NONBLOCK)); - (void) fcntl(statePtr->fd, F_SETFL, flags); -#endif - -#ifdef USE_FIONBIO - flags = 0; - (void) ioctl(statePtr->fd, FIONBIO, &flags); -#endif - } - if (state & TCL_EXCEPTION) { - return -1; - } - if (state & TCL_WRITABLE) { - statePtr->flags &= (~(TCP_ASYNC_CONNECT)); - } else if (timeOut == 0) { - *errorCodePtr = errno = EWOULDBLOCK; - return -1; - } - } - return 0; -} - -/* - *---------------------------------------------------------------------- - * - * TcpInputProc -- - * - * This procedure is invoked by the generic IO level to read input - * from a TCP socket based channel. - * - * NOTE: We cannot share code with FilePipeInputProc because here - * we must use recv to obtain the input from the channel, not read. - * - * Results: - * The number of bytes read is returned or -1 on error. An output - * argument contains the POSIX error code on error, or zero if no - * error occurred. - * - * Side effects: - * Reads input from the input device of the channel. - * - *---------------------------------------------------------------------- - */ - - /* ARGSUSED */ -static int -TcpInputProc(instanceData, buf, bufSize, errorCodePtr) - ClientData instanceData; /* Socket state. */ - char *buf; /* Where to store data read. */ - int bufSize; /* How much space is available - * in the buffer? */ - int *errorCodePtr; /* Where to store error code. */ -{ - TcpState *statePtr = (TcpState *) instanceData; - int bytesRead, state; - - *errorCodePtr = 0; - state = WaitForConnect(statePtr, errorCodePtr); - if (state != 0) { - return -1; - } - bytesRead = recv(statePtr->fd, buf, (size_t) bufSize, 0); - if (bytesRead > -1) { - return bytesRead; - } - if (errno == ECONNRESET) { - - /* - * Turn ECONNRESET into a soft EOF condition. - */ - - return 0; - } - *errorCodePtr = errno; - return -1; -} - -/* - *---------------------------------------------------------------------- - * - * TcpOutputProc -- - * - * This procedure is invoked by the generic IO level to write output - * to a TCP socket based channel. - * - * NOTE: We cannot share code with FilePipeOutputProc because here - * we must use send, not write, to get reliable error reporting. - * - * Results: - * The number of bytes written is returned. An output argument is - * set to a POSIX error code if an error occurred, or zero. - * - * Side effects: - * Writes output on the output device of the channel. - * - *---------------------------------------------------------------------- - */ - -static int -TcpOutputProc(instanceData, buf, toWrite, errorCodePtr) - ClientData instanceData; /* Socket state. */ - char *buf; /* The data buffer. */ - int toWrite; /* How many bytes to write? */ - int *errorCodePtr; /* Where to store error code. */ -{ - TcpState *statePtr = (TcpState *) instanceData; - int written; - int state; /* Of waiting for connection. */ - - *errorCodePtr = 0; - state = WaitForConnect(statePtr, errorCodePtr); - if (state != 0) { - return -1; - } - written = send(statePtr->fd, buf, (size_t) toWrite, 0); - if (written > -1) { - return written; - } - *errorCodePtr = errno; - return -1; -} - -/* - *---------------------------------------------------------------------- - * - * TcpCloseProc -- - * - * This procedure is invoked by the generic IO level to perform - * channel-type-specific cleanup when a TCP socket based channel - * is closed. - * - * Results: - * 0 if successful, the value of errno if failed. - * - * Side effects: - * Closes the socket of the channel. - * - *---------------------------------------------------------------------- - */ - - /* ARGSUSED */ -static int -TcpCloseProc(instanceData, interp) - ClientData instanceData; /* The socket to close. */ - Tcl_Interp *interp; /* For error reporting - unused. */ -{ - TcpState *statePtr = (TcpState *) instanceData; - int errorCode = 0; - - /* - * Delete a file handler that may be active for this socket if this - * is a server socket - the file handler was created automatically - * by Tcl as part of the mechanism to accept new client connections. - * Channel handlers are already deleted in the generic IO channel - * closing code that called this function, so we do not have to - * delete them here. - */ - - Tcl_DeleteFileHandler(statePtr->fd); - - if (close(statePtr->fd) < 0) { - errorCode = errno; - } - ckfree((char *) statePtr); - - return errorCode; -} - -/* - *---------------------------------------------------------------------- - * - * TcpGetOptionProc -- - * - * Computes an option value for a TCP socket based channel, or a - * list of all options and their values. - * - * Note: This code is based on code contributed by John Haxby. - * - * Results: - * A standard Tcl result. The value of the specified option or a - * list of all options and their values is returned in the - * supplied DString. Sets Error message if needed. - * - * Side effects: - * None. - * - *---------------------------------------------------------------------- - */ - -static int -TcpGetOptionProc(instanceData, interp, optionName, dsPtr) - ClientData instanceData; /* Socket state. */ - Tcl_Interp *interp; /* For error reporting - can be NULL. */ - char *optionName; /* Name of the option to - * retrieve the value for, or - * NULL to get all options and - * their values. */ - Tcl_DString *dsPtr; /* Where to store the computed - * value; initialized by caller. */ -{ - TcpState *statePtr = (TcpState *) instanceData; - struct sockaddr_in sockname; - struct sockaddr_in peername; - struct hostent *hostEntPtr; - int size = sizeof(struct sockaddr_in); - size_t len = 0; - char buf[TCL_INTEGER_SPACE]; - - if (optionName != (char *) NULL) { - len = strlen(optionName); - } - - if ((len > 1) && (optionName[1] == 'e') && - (strncmp(optionName, "-error", len) == 0)) { - int optlen; - int err, ret; - - optlen = sizeof(int); - ret = getsockopt(statePtr->fd, SOL_SOCKET, SO_ERROR, - (char *)&err, &optlen); - if (ret < 0) { - err = errno; - } - if (err != 0) { - Tcl_DStringAppend(dsPtr, Tcl_ErrnoMsg(err), -1); - } - return TCL_OK; - } - - if ((len == 0) || - ((len > 1) && (optionName[1] == 'p') && - (strncmp(optionName, "-peername", len) == 0))) { - if (getpeername(statePtr->fd, (struct sockaddr *) &peername, - &size) >= 0) { - if (len == 0) { - Tcl_DStringAppendElement(dsPtr, "-peername"); - Tcl_DStringStartSublist(dsPtr); - } - Tcl_DStringAppendElement(dsPtr, inet_ntoa(peername.sin_addr)); - hostEntPtr = gethostbyaddr( /* INTL: Native. */ - (char *) &peername.sin_addr, - sizeof(peername.sin_addr), AF_INET); - if (hostEntPtr != NULL) { - Tcl_DString ds; - - Tcl_ExternalToUtfDString(NULL, hostEntPtr->h_name, -1, &ds); - Tcl_DStringAppendElement(dsPtr, Tcl_DStringValue(&ds)); - } else { - Tcl_DStringAppendElement(dsPtr, inet_ntoa(peername.sin_addr)); - } - TclFormatInt(buf, ntohs(peername.sin_port)); - Tcl_DStringAppendElement(dsPtr, buf); - if (len == 0) { - Tcl_DStringEndSublist(dsPtr); - } else { - return TCL_OK; - } - } else { - /* - * getpeername failed - but if we were asked for all the options - * (len==0), don't flag an error at that point because it could - * be an fconfigure request on a server socket. (which have - * no peer). same must be done on win&mac. - */ - - if (len) { - if (interp) { - Tcl_AppendResult(interp, "can't get peername: ", - Tcl_PosixError(interp), - (char *) NULL); - } - return TCL_ERROR; - } - } - } - - if ((len == 0) || - ((len > 1) && (optionName[1] == 's') && - (strncmp(optionName, "-sockname", len) == 0))) { - if (getsockname(statePtr->fd, (struct sockaddr *) &sockname, &size) - >= 0) { - if (len == 0) { - Tcl_DStringAppendElement(dsPtr, "-sockname"); - Tcl_DStringStartSublist(dsPtr); - } - Tcl_DStringAppendElement(dsPtr, inet_ntoa(sockname.sin_addr)); - hostEntPtr = gethostbyaddr( /* INTL: Native. */ - (char *) &sockname.sin_addr, - sizeof(sockname.sin_addr), AF_INET); - if (hostEntPtr != (struct hostent *) NULL) { - Tcl_DString ds; - - Tcl_ExternalToUtfDString(NULL, hostEntPtr->h_name, -1, &ds); - Tcl_DStringAppendElement(dsPtr, Tcl_DStringValue(&ds)); - } else { - Tcl_DStringAppendElement(dsPtr, inet_ntoa(sockname.sin_addr)); - } - TclFormatInt(buf, ntohs(sockname.sin_port)); - Tcl_DStringAppendElement(dsPtr, buf); - if (len == 0) { - Tcl_DStringEndSublist(dsPtr); - } else { - return TCL_OK; - } - } else { - if (interp) { - Tcl_AppendResult(interp, "can't get sockname: ", - Tcl_PosixError(interp), - (char *) NULL); - } - return TCL_ERROR; - } - } - - if (len > 0) { - return Tcl_BadChannelOption(interp, optionName, "peername sockname"); - } - - return TCL_OK; -} - -/* - *---------------------------------------------------------------------- - * - * TcpWatchProc -- - * - * Initialize the notifier to watch the fd from this channel. - * - * Results: - * None. - * - * Side effects: - * Sets up the notifier so that a future event on the channel will - * be seen by Tcl. - * - *---------------------------------------------------------------------- - */ - -static void -TcpWatchProc(instanceData, mask) - ClientData instanceData; /* The socket state. */ - int mask; /* Events of interest; an OR-ed - * combination of TCL_READABLE, - * TCL_WRITABLE and TCL_EXCEPTION. */ -{ - TcpState *statePtr = (TcpState *) instanceData; - - /* - * Make sure we don't mess with server sockets since they will never - * be readable or writable at the Tcl level. This keeps Tcl scripts - * from interfering with the -accept behavior. - */ - - if (!statePtr->acceptProc) { - if (mask) { - Tcl_CreateFileHandler(statePtr->fd, mask, - (Tcl_FileProc *) Tcl_NotifyChannel, - (ClientData) statePtr->channel); - } else { - Tcl_DeleteFileHandler(statePtr->fd); - } - } -} - -/* - *---------------------------------------------------------------------- - * - * TcpGetHandleProc -- - * - * Called from Tcl_GetChannelHandle to retrieve OS handles from inside - * a TCP socket based channel. - * - * Results: - * Returns TCL_OK with the fd in handlePtr, or TCL_ERROR if - * there is no handle for the specified direction. - * - * Side effects: - * None. - * - *---------------------------------------------------------------------- - */ - - /* ARGSUSED */ -static int -TcpGetHandleProc(instanceData, direction, handlePtr) - ClientData instanceData; /* The socket state. */ - int direction; /* Not used. */ - ClientData *handlePtr; /* Where to store the handle. */ -{ - TcpState *statePtr = (TcpState *) instanceData; + fsPtr->channel = Tcl_CreateChannel(channelTypePtr, channelName, + fsPtr, mode); - *handlePtr = (ClientData)statePtr->fd; - return TCL_OK; + return fsPtr->channel; } /* *---------------------------------------------------------------------- * - * CreateSocket -- + * TclpGetDefaultStdChannel -- * - * This function opens a new socket in client or server mode - * and initializes the TcpState structure. + * Creates channels for standard input, standard output or standard error + * output if they do not already exist. * * Results: - * Returns a new TcpState, or NULL with an error in the interp's - * result, if interp is not NULL. + * Returns the specified default standard channel, or NULL. * * Side effects: - * Opens a socket. + * May cause the creation of a standard channel and the underlying file. * *---------------------------------------------------------------------- */ -static TcpState * -CreateSocket(interp, port, host, server, myaddr, myport, async) - Tcl_Interp *interp; /* For error reporting; can be NULL. */ - int port; /* Port number to open. */ - char *host; /* Name of host on which to open port. - * NULL implies INADDR_ANY */ - int server; /* 1 if socket should be a server socket, - * else 0 for a client socket. */ - char *myaddr; /* Optional client-side address */ - int myport; /* Optional client-side port */ - int async; /* If nonzero and creating a client socket, - * attempt to do an async connect. Otherwise - * do a synchronous connect or bind. */ +Tcl_Channel +TclpGetDefaultStdChannel( + int type) /* One of TCL_STDIN, TCL_STDOUT, TCL_STDERR. */ { - int status, sock, asyncConnect, curState, origState; - struct sockaddr_in sockaddr; /* socket address */ - struct sockaddr_in mysockaddr; /* Socket address for client */ - TcpState *statePtr; - - sock = -1; - origState = 0; - if (! CreateSocketAddress(&sockaddr, host, port)) { - goto addressError; - } - if ((myaddr != NULL || myport != 0) && - ! CreateSocketAddress(&mysockaddr, myaddr, myport)) { - goto addressError; - } - - sock = socket(AF_INET, SOCK_STREAM, 0); - if (sock < 0) { - goto addressError; - } - - /* - * Set the close-on-exec flag so that the socket will not get - * inherited by child processes. - */ + Tcl_Channel channel = NULL; + int fd = 0; /* Initializations needed to prevent */ + int mode = 0; /* compiler warning (used before set). */ + const char *bufMode = NULL; - fcntl(sock, F_SETFD, FD_CLOEXEC); - /* - * Set kernel space buffering + * Some #def's to make the code a little clearer! */ - TclSockMinimumBuffers(sock, SOCKET_BUFSIZE); - - asyncConnect = 0; - status = 0; - if (server) { +#define ZERO_OFFSET ((Tcl_SeekOffset) 0) +#define ERROR_OFFSET ((Tcl_SeekOffset) -1) - /* - * Set up to reuse server addresses automatically and bind to the - * specified port. - */ - - status = 1; - (void) setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, (char *) &status, - sizeof(status)); - status = bind(sock, (struct sockaddr *) &sockaddr, - sizeof(struct sockaddr)); - if (status != -1) { - status = listen(sock, SOMAXCONN); - } - } else { - if (myaddr != NULL || myport != 0) { - curState = 1; - (void) setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, - (char *) &curState, sizeof(curState)); - status = bind(sock, (struct sockaddr *) &mysockaddr, - sizeof(struct sockaddr)); - if (status < 0) { - goto bindError; - } + switch (type) { + case TCL_STDIN: + if ((TclOSseek(0, ZERO_OFFSET, SEEK_CUR) == ERROR_OFFSET) + && (errno == EBADF)) { + return NULL; } - - /* - * Attempt to connect. The connect may fail at present with an - * EINPROGRESS but at a later time it will complete. The caller - * will set up a file handler on the socket if she is interested in - * being informed when the connect completes. - */ - - if (async) { -#ifndef USE_FIONBIO - origState = fcntl(sock, F_GETFL); - curState = origState | O_NONBLOCK; - status = fcntl(sock, F_SETFL, curState); -#endif - -#ifdef USE_FIONBIO - curState = 1; - status = ioctl(sock, FIONBIO, &curState); -#endif - } else { - status = 0; - } - if (status > -1) { - status = connect(sock, (struct sockaddr *) &sockaddr, - sizeof(sockaddr)); - if (status < 0) { - if (errno == EINPROGRESS) { - asyncConnect = 1; - status = 0; - } - } else { - /* - * Here we are if the connect succeeds. In case of an - * asynchronous connect we have to reset the channel to - * blocking mode. This appears to happen not very often, - * but e.g. on a HP 9000/800 under HP-UX B.11.00 we enter - * this stage. [Bug: 4388] - */ - if (async) { -#ifndef USE_FIONBIO - origState = fcntl(sock, F_GETFL); - curState = origState & ~(O_NONBLOCK); - status = fcntl(sock, F_SETFL, curState); -#endif - -#ifdef USE_FIONBIO - curState = 0; - status = ioctl(sock, FIONBIO, &curState); -#endif - } - } - } - } - -bindError: - if (status < 0) { - if (interp != NULL) { - Tcl_AppendResult(interp, "couldn't open socket: ", - Tcl_PosixError(interp), (char *) NULL); - } - if (sock != -1) { - close(sock); - } - return NULL; - } - - /* - * Allocate a new TcpState for this socket. - */ - - statePtr = (TcpState *) ckalloc((unsigned) sizeof(TcpState)); - statePtr->flags = 0; - if (asyncConnect) { - statePtr->flags = TCP_ASYNC_CONNECT; - } - statePtr->fd = sock; - - return statePtr; - -addressError: - if (sock != -1) { - close(sock); - } - if (interp != NULL) { - Tcl_AppendResult(interp, "couldn't open socket: ", - Tcl_PosixError(interp), (char *) NULL); - } - return NULL; -} - -/* - *---------------------------------------------------------------------- - * - * CreateSocketAddress -- - * - * This function initializes a sockaddr structure for a host and port. - * - * Results: - * 1 if the host was valid, 0 if the host could not be converted to - * an IP address. - * - * Side effects: - * Fills in the *sockaddrPtr structure. - * - *---------------------------------------------------------------------- - */ - -static int -CreateSocketAddress(sockaddrPtr, host, port) - struct sockaddr_in *sockaddrPtr; /* Socket address */ - char *host; /* Host. NULL implies INADDR_ANY */ - int port; /* Port number */ -{ - struct hostent *hostent; /* Host database entry */ - struct in_addr addr; /* For 64/32 bit madness */ - - (void) memset((VOID *) sockaddrPtr, '\0', sizeof(struct sockaddr_in)); - sockaddrPtr->sin_family = AF_INET; - sockaddrPtr->sin_port = htons((unsigned short) (port & 0xFFFF)); - if (host == NULL) { - addr.s_addr = INADDR_ANY; - } else { - Tcl_DString ds; - CONST char *native; - - if (host == NULL) { - native = NULL; - } else { - native = Tcl_UtfToExternalDString(NULL, host, -1, &ds); + fd = 0; + mode = TCL_READABLE; + bufMode = "line"; + break; + case TCL_STDOUT: + if ((TclOSseek(1, ZERO_OFFSET, SEEK_CUR) == ERROR_OFFSET) + && (errno == EBADF)) { + return NULL; } - addr.s_addr = inet_addr(native); /* INTL: Native. */ - /* - * This is 0xFFFFFFFF to ensure that it compares as a 32bit -1 - * on either 32 or 64 bits systems. - */ - if (addr.s_addr == 0xFFFFFFFF) { - hostent = gethostbyname(native); /* INTL: Native. */ - if (hostent != NULL) { - memcpy((VOID *) &addr, - (VOID *) hostent->h_addr_list[0], - (size_t) hostent->h_length); - } else { -#ifdef EHOSTUNREACH - errno = EHOSTUNREACH; -#else -#ifdef ENXIO - errno = ENXIO; -#endif -#endif - if (native != NULL) { - Tcl_DStringFree(&ds); - } - return 0; /* error */ - } - } - if (native != NULL) { - Tcl_DStringFree(&ds); + fd = 1; + mode = TCL_WRITABLE; + bufMode = "line"; + break; + case TCL_STDERR: + if ((TclOSseek(2, ZERO_OFFSET, SEEK_CUR) == ERROR_OFFSET) + && (errno == EBADF)) { + return NULL; } - } - - /* - * NOTE: On 64 bit machines the assignment below is rumored to not - * do the right thing. Please report errors related to this if you - * observe incorrect behavior on 64 bit machines such as DEC Alphas. - * Should we modify this code to do an explicit memcpy? - */ - - sockaddrPtr->sin_addr.s_addr = addr.s_addr; - return 1; /* Success. */ -} - -/* - *---------------------------------------------------------------------- - * - * Tcl_OpenTcpClient -- - * - * Opens a TCP client socket and creates a channel around it. - * - * Results: - * The channel or NULL if failed. An error message is returned - * in the interpreter on failure. - * - * Side effects: - * Opens a client socket and creates a new channel. - * - *---------------------------------------------------------------------- - */ - -Tcl_Channel -Tcl_OpenTcpClient(interp, port, host, myaddr, myport, async) - Tcl_Interp *interp; /* For error reporting; can be NULL. */ - int port; /* Port number to open. */ - char *host; /* Host on which to open port. */ - char *myaddr; /* Client-side address */ - int myport; /* Client-side port */ - int async; /* If nonzero, attempt to do an - * asynchronous connect. Otherwise - * we do a blocking connect. */ -{ - TcpState *statePtr; - char channelName[16 + TCL_INTEGER_SPACE]; - - /* - * Create a new client socket and wrap it in a channel. - */ - - statePtr = CreateSocket(interp, port, host, 0, myaddr, myport, async); - if (statePtr == NULL) { - return NULL; - } - - statePtr->acceptProc = NULL; - statePtr->acceptProcData = (ClientData) NULL; - - sprintf(channelName, "sock%d", statePtr->fd); - - statePtr->channel = Tcl_CreateChannel(&tcpChannelType, channelName, - (ClientData) statePtr, (TCL_READABLE | TCL_WRITABLE)); - if (Tcl_SetChannelOption(interp, statePtr->channel, "-translation", - "auto crlf") == TCL_ERROR) { - Tcl_Close((Tcl_Interp *) NULL, statePtr->channel); - return NULL; - } - return statePtr->channel; -} - -/* - *---------------------------------------------------------------------- - * - * Tcl_MakeTcpClientChannel -- - * - * Creates a Tcl_Channel from an existing client TCP socket. - * - * Results: - * The Tcl_Channel wrapped around the preexisting TCP socket. - * - * Side effects: - * None. - * - *---------------------------------------------------------------------- - */ - -Tcl_Channel -Tcl_MakeTcpClientChannel(sock) - ClientData sock; /* The socket to wrap up into a channel. */ -{ - TcpState *statePtr; - char channelName[16 + TCL_INTEGER_SPACE]; - - statePtr = (TcpState *) ckalloc((unsigned) sizeof(TcpState)); - statePtr->fd = (int) sock; - statePtr->acceptProc = NULL; - statePtr->acceptProcData = (ClientData) NULL; - - sprintf(channelName, "sock%d", statePtr->fd); - - statePtr->channel = Tcl_CreateChannel(&tcpChannelType, channelName, - (ClientData) statePtr, (TCL_READABLE | TCL_WRITABLE)); - if (Tcl_SetChannelOption((Tcl_Interp *) NULL, statePtr->channel, - "-translation", "auto crlf") == TCL_ERROR) { - Tcl_Close((Tcl_Interp *) NULL, statePtr->channel); - return NULL; - } - return statePtr->channel; -} - -/* - *---------------------------------------------------------------------- - * - * Tcl_OpenTcpServer -- - * - * Opens a TCP server socket and creates a channel around it. - * - * Results: - * The channel or NULL if failed. If an error occurred, an - * error message is left in the interp's result if interp is - * not NULL. - * - * Side effects: - * Opens a server socket and creates a new channel. - * - *---------------------------------------------------------------------- - */ - -Tcl_Channel -Tcl_OpenTcpServer(interp, port, myHost, acceptProc, acceptProcData) - Tcl_Interp *interp; /* For error reporting - may be - * NULL. */ - int port; /* Port number to open. */ - char *myHost; /* Name of local host. */ - Tcl_TcpAcceptProc *acceptProc; /* Callback for accepting connections - * from new clients. */ - ClientData acceptProcData; /* Data for the callback. */ -{ - TcpState *statePtr; - char channelName[16 + TCL_INTEGER_SPACE]; - - /* - * Create a new client socket and wrap it in a channel. - */ - - statePtr = CreateSocket(interp, port, myHost, 1, NULL, 0, 0); - if (statePtr == NULL) { - return NULL; - } - - statePtr->acceptProc = acceptProc; - statePtr->acceptProcData = acceptProcData; - - /* - * Set up the callback mechanism for accepting connections - * from new clients. - */ - - Tcl_CreateFileHandler(statePtr->fd, TCL_READABLE, TcpAccept, - (ClientData) statePtr); - sprintf(channelName, "sock%d", statePtr->fd); - statePtr->channel = Tcl_CreateChannel(&tcpChannelType, channelName, - (ClientData) statePtr, 0); - return statePtr->channel; -} - -/* - *---------------------------------------------------------------------- - * - * TcpAccept -- - * Accept a TCP socket connection. This is called by the event loop. - * - * Results: - * None. - * - * Side effects: - * Creates a new connection socket. Calls the registered callback - * for the connection acceptance mechanism. - * - *---------------------------------------------------------------------- - */ - - /* ARGSUSED */ -static void -TcpAccept(data, mask) - ClientData data; /* Callback token. */ - int mask; /* Not used. */ -{ - TcpState *sockState; /* Client data of server socket. */ - int newsock; /* The new client socket */ - TcpState *newSockState; /* State for new socket. */ - struct sockaddr_in addr; /* The remote address */ - int len; /* For accept interface */ - char channelName[16 + TCL_INTEGER_SPACE]; - - sockState = (TcpState *) data; - - len = sizeof(struct sockaddr_in); - newsock = accept(sockState->fd, (struct sockaddr *) &addr, &len); - if (newsock < 0) { - return; + fd = 2; + mode = TCL_WRITABLE; + bufMode = "none"; + break; + default: + Tcl_Panic("TclGetDefaultStdChannel: Unexpected channel type"); + break; } - /* - * Set close-on-exec flag to prevent the newly accepted socket from - * being inherited by child processes. - */ +#undef ZERO_OFFSET +#undef ERROR_OFFSET - (void) fcntl(newsock, F_SETFD, FD_CLOEXEC); - - newSockState = (TcpState *) ckalloc((unsigned) sizeof(TcpState)); - - newSockState->flags = 0; - newSockState->fd = newsock; - newSockState->acceptProc = NULL; - newSockState->acceptProcData = NULL; - - sprintf(channelName, "sock%d", newsock); - newSockState->channel = Tcl_CreateChannel(&tcpChannelType, channelName, - (ClientData) newSockState, (TCL_READABLE | TCL_WRITABLE)); - - Tcl_SetChannelOption(NULL, newSockState->channel, "-translation", - "auto crlf"); - - if (sockState->acceptProc != NULL) { - (*sockState->acceptProc)(sockState->acceptProcData, - newSockState->channel, inet_ntoa(addr.sin_addr), - ntohs(addr.sin_port)); - } -} - -/* - *---------------------------------------------------------------------- - * - * TclpGetDefaultStdChannel -- - * - * Creates channels for standard input, standard output or standard - * error output if they do not already exist. - * - * Results: - * Returns the specified default standard channel, or NULL. - * - * Side effects: - * May cause the creation of a standard channel and the underlying - * file. - * - *---------------------------------------------------------------------- - */ - -Tcl_Channel -TclpGetDefaultStdChannel(type) - int type; /* One of TCL_STDIN, TCL_STDOUT, TCL_STDERR. */ -{ - Tcl_Channel channel = NULL; - int fd = 0; /* Initializations needed to prevent */ - int mode = 0; /* compiler warning (used before set). */ - char *bufMode = NULL; - - switch (type) { - case TCL_STDIN: - if ((lseek(0, (off_t) 0, SEEK_CUR) == -1) && - (errno == EBADF)) { - return (Tcl_Channel) NULL; - } - fd = 0; - mode = TCL_READABLE; - bufMode = "line"; - break; - case TCL_STDOUT: - if ((lseek(1, (off_t) 0, SEEK_CUR) == -1) && - (errno == EBADF)) { - return (Tcl_Channel) NULL; - } - fd = 1; - mode = TCL_WRITABLE; - bufMode = "line"; - break; - case TCL_STDERR: - if ((lseek(2, (off_t) 0, SEEK_CUR) == -1) && - (errno == EBADF)) { - return (Tcl_Channel) NULL; - } - fd = 2; - mode = TCL_WRITABLE; - bufMode = "none"; - break; - default: - panic("TclGetDefaultStdChannel: Unexpected channel type"); - break; - } - - channel = Tcl_MakeFileChannel((ClientData) fd, mode); + channel = Tcl_MakeFileChannel(INT2PTR(fd), mode); if (channel == NULL) { return NULL; } @@ -2503,7 +1577,11 @@ TclpGetDefaultStdChannel(type) * Set up the normal channel options for stdio handles. */ - Tcl_SetChannelOption(NULL, channel, "-translation", "auto"); + if (Tcl_GetChannelType(channel) == &fileChannelType) { + Tcl_SetChannelOption(NULL, channel, "-translation", "auto"); + } else { + Tcl_SetChannelOption(NULL, channel, "-translation", "auto crlf"); + } Tcl_SetChannelOption(NULL, channel, "-buffering", bufMode); return channel; } @@ -2513,16 +1591,16 @@ TclpGetDefaultStdChannel(type) * * Tcl_GetOpenFile -- * - * Given a name of a channel registered in the given interpreter, - * returns a FILE * for it. + * Given a name of a channel registered in the given interpreter, returns + * a FILE * for it. * * Results: * A standard Tcl result. If the channel is registered in the given - * interpreter and it is managed by the "file" channel driver, and - * it is open for the requested mode, then the output parameter - * filePtr is set to a FILE * for the underlying file. On error, the - * filePtr is not set, TCL_ERROR is returned and an error message is - * left in the interp's result. + * interpreter and it is managed by the "file" channel driver, and it is + * open for the requested mode, then the output parameter filePtr is set + * to a FILE * for the underlying file. On error, the filePtr is not set, + * TCL_ERROR is returned and an error message is left in the interp's + * result. * * Side effects: * May invoke fdopen to create the FILE * for the requested file. @@ -2531,37 +1609,40 @@ TclpGetDefaultStdChannel(type) */ int -Tcl_GetOpenFile(interp, string, forWriting, checkUsage, filePtr) - Tcl_Interp *interp; /* Interpreter in which to find file. */ - char *string; /* String that identifies file. */ - int forWriting; /* 1 means the file is going to be used - * for writing, 0 means for reading. */ - int checkUsage; /* 1 means verify that the file was opened - * in a mode that allows the access specified - * by "forWriting". Ignored, we always - * check that the channel is open for the - * requested mode. */ - ClientData *filePtr; /* Store pointer to FILE structure here. */ +Tcl_GetOpenFile( + Tcl_Interp *interp, /* Interpreter in which to find file. */ + const char *chanID, /* String that identifies file. */ + int forWriting, /* 1 means the file is going to be used for + * writing, 0 means for reading. */ + int checkUsage, /* 1 means verify that the file was opened in + * a mode that allows the access specified by + * "forWriting". Ignored, we always check that + * the channel is open for the requested + * mode. */ + ClientData *filePtr) /* Store pointer to FILE structure here. */ { Tcl_Channel chan; - int chanMode; - Tcl_ChannelType *chanTypePtr; + int chanMode, fd; + const Tcl_ChannelType *chanTypePtr; ClientData data; - int fd; FILE *f; - - chan = Tcl_GetChannel(interp, string, &chanMode); - if (chan == (Tcl_Channel) NULL) { - return TCL_ERROR; + + chan = Tcl_GetChannel(interp, chanID, &chanMode); + if (chan == NULL) { + return TCL_ERROR; } - if ((forWriting) && ((chanMode & TCL_WRITABLE) == 0)) { - Tcl_AppendResult(interp, - "\"", string, "\" wasn't opened for writing", (char *) NULL); - return TCL_ERROR; - } else if ((!(forWriting)) && ((chanMode & TCL_READABLE) == 0)) { - Tcl_AppendResult(interp, - "\"", string, "\" wasn't opened for reading", (char *) NULL); - return TCL_ERROR; + if (forWriting && !(chanMode & TCL_WRITABLE)) { + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "\"%s\" wasn't opened for writing", chanID)); + Tcl_SetErrorCode(interp, "TCL", "VALUE", "CHANNEL", "NOT_WRITABLE", + NULL); + return TCL_ERROR; + } else if (!forWriting && !(chanMode & TCL_READABLE)) { + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "\"%s\" wasn't opened for reading", chanID)); + Tcl_SetErrorCode(interp, "TCL", "VALUE", "CHANNEL", "NOT_READABLE", + NULL); + return TCL_ERROR; } /* @@ -2574,53 +1655,57 @@ Tcl_GetOpenFile(interp, string, forWriting, checkUsage, filePtr) if ((chanTypePtr == &fileChannelType) #ifdef SUPPORTS_TTY || (chanTypePtr == &ttyChannelType) -#endif /* SUPPORTS_TTY */ - || (chanTypePtr == &tcpChannelType) +#endif /* SUPPORTS_TTY */ + || (strcmp(chanTypePtr->typeName, "tcp") == 0) || (strcmp(chanTypePtr->typeName, "pipe") == 0)) { - if (Tcl_GetChannelHandle(chan, - (forWriting ? TCL_WRITABLE : TCL_READABLE), - (ClientData*) &data) == TCL_OK) { - fd = (int) data; + if (Tcl_GetChannelHandle(chan, + (forWriting ? TCL_WRITABLE : TCL_READABLE), &data) == TCL_OK) { + fd = PTR2INT(data); /* * The call to fdopen below is probably dangerous, since it will - * truncate an existing file if the file is being opened - * for writing.... + * truncate an existing file if the file is being opened for + * writing.... */ - + f = fdopen(fd, (forWriting ? "w" : "r")); if (f == NULL) { - Tcl_AppendResult(interp, "cannot get a FILE * for \"", string, - "\"", (char *) NULL); + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "cannot get a FILE * for \"%s\"", chanID)); + Tcl_SetErrorCode(interp, "TCL", "VALUE", "CHANNEL", + "FILE_FAILURE", NULL); return TCL_ERROR; } - *filePtr = (ClientData) f; + *filePtr = f; return TCL_OK; } } - Tcl_AppendResult(interp, "\"", string, - "\" cannot be used to get a FILE *", (char *) NULL); - return TCL_ERROR; + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "\"%s\" cannot be used to get a FILE *", chanID)); + Tcl_SetErrorCode(interp, "TCL", "VALUE", "CHANNEL", "NO_DESCRIPTOR", + NULL); + return TCL_ERROR; } +#ifndef HAVE_COREFOUNDATION /* Darwin/Mac OS X CoreFoundation notifier is + * in tclMacOSXNotify.c */ /* *---------------------------------------------------------------------- * * TclUnixWaitForFile -- * - * This procedure waits synchronously for a file to become readable - * or writable, with an optional timeout. + * This function waits synchronously for a file to become readable or + * writable, with an optional timeout. * * Results: * The return value is an OR'ed combination of TCL_READABLE, - * TCL_WRITABLE, and TCL_EXCEPTION, indicating the conditions - * that are present on file at the time of the return. This - * procedure will not return until either "timeout" milliseconds - * have elapsed or at least one of the conditions given by mask - * has occurred for file (a return value of 0 means that a timeout - * occurred). No normal events will be serviced during the - * execution of this procedure. + * TCL_WRITABLE, and TCL_EXCEPTION, indicating the conditions that are + * present on file at the time of the return. This function will not + * return until either "timeout" milliseconds have elapsed or at least + * one of the conditions given by mask has occurred for file (a return + * value of 0 means that a timeout occurred). No normal events will be + * serviced during the execution of this function. * * Side effects: * Time passes. @@ -2629,32 +1714,42 @@ Tcl_GetOpenFile(interp, string, forWriting, checkUsage, filePtr) */ int -TclUnixWaitForFile(fd, mask, timeout) - int fd; /* Handle for file on which to wait. */ - int mask; /* What to wait for: OR'ed combination of +TclUnixWaitForFile( + int fd, /* Handle for file on which to wait. */ + int mask, /* What to wait for: OR'ed combination of * TCL_READABLE, TCL_WRITABLE, and * TCL_EXCEPTION. */ - int timeout; /* Maximum amount of time to wait for one - * of the conditions in mask to occur, in - * milliseconds. A value of 0 means don't - * wait at all, and a value of -1 means - * wait forever. */ + int timeout) /* Maximum amount of time to wait for one of + * the conditions in mask to occur, in + * milliseconds. A value of 0 means don't wait + * at all, and a value of -1 means wait + * forever. */ { - Tcl_Time abortTime, now; + Tcl_Time abortTime = {0, 0}, now; /* silence gcc 4 warning */ struct timeval blockTime, *timeoutPtr; - int index, bit, numFound, result = 0; - fd_mask readyMasks[3*MASK_SIZE]; - /* This array reflects the readable/writable - * conditions that were found to exist by the - * last call to select. */ + int numFound, result = 0; + fd_set readableMask; + fd_set writableMask; + fd_set exceptionMask; +#ifndef _DARWIN_C_SOURCE /* - * If there is a non-zero finite timeout, compute the time when - * we give up. + * Sanity check fd. + */ + + if (fd >= FD_SETSIZE) { + Tcl_Panic("TclUnixWaitForFile can't handle file id %d", fd); + /* must never get here, or select masks overrun will occur below */ + } +#endif + + /* + * If there is a non-zero finite timeout, compute the time when we give + * up. */ if (timeout > 0) { - TclpGetTime(&now); + Tcl_GetTime(&now); abortTime.sec = now.sec + timeout/1000; abortTime.usec = now.usec + (timeout%1000)*1000; if (abortTime.usec >= 1000000) { @@ -2671,19 +1766,16 @@ TclUnixWaitForFile(fd, mask, timeout) } /* - * Initialize the ready masks and compute the mask offsets. + * Initialize the select masks. */ - if (fd >= FD_SETSIZE) { - panic("TclWaitForFile can't handle file id %d", fd); - } - memset((VOID *) readyMasks, 0, 3*MASK_SIZE*sizeof(fd_mask)); - index = fd/(NBBY*sizeof(fd_mask)); - bit = 1 << (fd%(NBBY*sizeof(fd_mask))); - + FD_ZERO(&readableMask); + FD_ZERO(&writableMask); + FD_ZERO(&exceptionMask); + /* - * Loop in a mini-event loop of our own, waiting for either the - * file to become ready or a timeout to occur. + * Loop in a mini-event loop of our own, waiting for either the file to + * become ready or a timeout to occur. */ while (1) { @@ -2699,37 +1791,36 @@ TclUnixWaitForFile(fd, mask, timeout) blockTime.tv_usec = 0; } } - + /* - * Set the appropriate bit in the ready masks for the fd. + * Setup the select masks for the fd. */ if (mask & TCL_READABLE) { - readyMasks[index] |= bit; + FD_SET(fd, &readableMask); } if (mask & TCL_WRITABLE) { - (readyMasks+MASK_SIZE)[index] |= bit; + FD_SET(fd, &writableMask); } if (mask & TCL_EXCEPTION) { - (readyMasks+2*(MASK_SIZE))[index] |= bit; + FD_SET(fd, &exceptionMask); } /* * Wait for the event or a timeout. */ - numFound = select(fd+1, (SELECT_MASK *) &readyMasks[0], - (SELECT_MASK *) &readyMasks[MASK_SIZE], - (SELECT_MASK *) &readyMasks[2*MASK_SIZE], timeoutPtr); + numFound = select(fd + 1, &readableMask, &writableMask, + &exceptionMask, timeoutPtr); if (numFound == 1) { - if (readyMasks[index] & bit) { - result |= TCL_READABLE; + if (FD_ISSET(fd, &readableMask)) { + SET_BITS(result, TCL_READABLE); } - if ((readyMasks+MASK_SIZE)[index] & bit) { - result |= TCL_WRITABLE; + if (FD_ISSET(fd, &writableMask)) { + SET_BITS(result, TCL_WRITABLE); } - if ((readyMasks+2*(MASK_SIZE))[index] & bit) { - result |= TCL_EXCEPTION; + if (FD_ISSET(fd, &exceptionMask)) { + SET_BITS(result, TCL_EXCEPTION); } result &= mask; if (result) { @@ -2739,17 +1830,70 @@ TclUnixWaitForFile(fd, mask, timeout) if (timeout == 0) { break; } + if (timeout < 0) { + continue; + } /* * The select returned early, so we need to recompute the timeout. */ - TclpGetTime(&now); + Tcl_GetTime(&now); if ((abortTime.sec < now.sec) - || ((abortTime.sec == now.sec) - && (abortTime.usec <= now.usec))) { + || (abortTime.sec==now.sec && abortTime.usec<=now.usec)) { break; } } return result; } +#endif /* HAVE_COREFOUNDATION */ + +/* + *---------------------------------------------------------------------- + * + * FileTruncateProc -- + * + * Truncates a file to a given length. + * + * Results: + * 0 if the operation succeeded, and -1 if it failed (in which case + * *errorCodePtr will be set to errno). + * + * Side effects: + * The underlying file is potentially truncated. This can have a wide + * variety of side effects, including moving file pointers that point at + * places later in the file than the truncate point. + * + *---------------------------------------------------------------------- + */ + +static int +FileTruncateProc( + ClientData instanceData, + Tcl_WideInt length) +{ + FileState *fsPtr = instanceData; + int result; + +#ifdef HAVE_TYPE_OFF64_T + /* + * We assume this goes with the type for now... + */ + + result = ftruncate64(fsPtr->fd, (off64_t) length); +#else + result = ftruncate(fsPtr->fd, (off_t) length); +#endif + if (result) { + return errno; + } + return 0; +} + +/* + * Local Variables: + * mode: c + * c-basic-offset: 4 + * fill-column: 78 + * End: + */ |