diff options
Diffstat (limited to 'unix/tclUnixThrd.c')
| -rw-r--r-- | unix/tclUnixThrd.c | 629 |
1 files changed, 245 insertions, 384 deletions
diff --git a/unix/tclUnixThrd.c b/unix/tclUnixThrd.c index ee080ba..d34bc88 100644 --- a/unix/tclUnixThrd.c +++ b/unix/tclUnixThrd.c @@ -1,53 +1,44 @@ -/* +/* * tclUnixThrd.c -- * * This file implements the UNIX-specific thread support. * * Copyright (c) 1991-1994 The Regents of the University of California. * Copyright (c) 1994-1997 Sun Microsystems, Inc. + * Copyright (c) 2008 by George Peter Staplin * - * See the file "license.terms" for information on usage and redistribution - * of this file, and for a DISCLAIMER OF ALL WARRANTIES. - * - * SCCS: @(#) tclUnixThrd.c 1.18 98/02/19 14:24:12 + * See the file "license.terms" for information on usage and redistribution of + * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tclInt.h" -#include "tclPort.h" #ifdef TCL_THREADS -#include "pthread.h" - typedef struct ThreadSpecificData { - char nabuf[16]; - struct { - Tcl_DirEntry ent; - char name[MAXNAMLEN+1]; - } rdbuf; + char nabuf[16]; } ThreadSpecificData; static Tcl_ThreadDataKey dataKey; /* - * masterLock is used to serialize creation of mutexes, condition - * variables, and thread local storage. - * This is the only place that can count on the ability to statically - * initialize the mutex. + * masterLock is used to serialize creation of mutexes, condition variables, + * and thread local storage. This is the only place that can count on the + * ability to statically initialize the mutex. */ static pthread_mutex_t masterLock = PTHREAD_MUTEX_INITIALIZER; /* - * initLock is used to serialize initialization and finalization - * of Tcl. It cannot use any dyamically allocated storage. + * initLock is used to serialize initialization and finalization of Tcl. It + * cannot use any dyamically allocated storage. */ static pthread_mutex_t initLock = PTHREAD_MUTEX_INITIALIZER; /* - * allocLock is used by Tcl's version of malloc for synchronization. - * For obvious reasons, cannot use any dyamically allocated storage. + * allocLock is used by Tcl's version of malloc for synchronization. For + * obvious reasons, cannot use any dyamically allocated storage. */ static pthread_mutex_t allocLock = PTHREAD_MUTEX_INITIALIZER; @@ -61,7 +52,6 @@ static pthread_mutex_t *allocLockPtr = &allocLock; #define MASTER_UNLOCK pthread_mutex_unlock(&masterLock) #endif /* TCL_THREADS */ - /* *---------------------------------------------------------------------- @@ -71,8 +61,8 @@ static pthread_mutex_t *allocLockPtr = &allocLock; * This procedure creates a new thread. * * Results: - * TCL_OK if the thread could be created. The thread ID is - * returned in a parameter. + * TCL_OK if the thread could be created. The thread ID is returned in a + * parameter. * * Side effects: * A new thread is created. @@ -81,13 +71,13 @@ static pthread_mutex_t *allocLockPtr = &allocLock; */ int -TclpThreadCreate(idPtr, proc, clientData, stackSize, flags) - Tcl_ThreadId *idPtr; /* Return, the ID of the thread */ - Tcl_ThreadCreateProc proc; /* Main() function of the thread */ - ClientData clientData; /* The one argument to Main() */ - int stackSize; /* Size of stack for the new thread */ - int flags; /* Flags controlling behaviour of - * the new thread */ +TclpThreadCreate( + Tcl_ThreadId *idPtr, /* Return, the ID of the thread */ + Tcl_ThreadCreateProc *proc, /* Main() function of the thread */ + ClientData clientData, /* The one argument to Main() */ + int stackSize, /* Size of stack for the new thread */ + int flags) /* Flags controlling behaviour of the new + * thread. */ { #ifdef TCL_THREADS pthread_attr_t attr; @@ -99,14 +89,14 @@ TclpThreadCreate(idPtr, proc, clientData, stackSize, flags) #ifdef HAVE_PTHREAD_ATTR_SETSTACKSIZE if (stackSize != TCL_THREAD_STACK_DEFAULT) { - pthread_attr_setstacksize(&attr, (size_t) stackSize); + pthread_attr_setstacksize(&attr, (size_t) stackSize); #ifdef TCL_THREAD_STACK_MIN } else { - /* - * Certain systems define a thread stack size that by default is - * too small for many operations. The user has the option of - * defining TCL_THREAD_STACK_MIN to a value large enough to work - * for their needs. This would look like (for 128K min stack): + /* + * Certain systems define a thread stack size that by default is too + * small for many operations. The user has the option of defining + * TCL_THREAD_STACK_MIN to a value large enough to work for their + * needs. This would look like (for 128K min stack): * make MEM_DEBUG_FLAGS=-DTCL_THREAD_STACK_MIN=131072L * * This solution is not optimal, as we should allow the user to @@ -114,23 +104,24 @@ TclpThreadCreate(idPtr, proc, clientData, stackSize, flags) * down, and that would still leave the main thread at the default. */ - size_t size; + size_t size; + result = pthread_attr_getstacksize(&attr, &size); if (!result && (size < TCL_THREAD_STACK_MIN)) { pthread_attr_setstacksize(&attr, (size_t) TCL_THREAD_STACK_MIN); } -#endif +#endif /* TCL_THREAD_STACK_MIN */ } -#endif +#endif /* HAVE_PTHREAD_ATTR_SETSTACKSIZE */ + if (! (flags & TCL_THREAD_JOINABLE)) { - pthread_attr_setdetachstate (&attr, PTHREAD_CREATE_DETACHED); + pthread_attr_setdetachstate (&attr, PTHREAD_CREATE_DETACHED); } - if (pthread_create(&theThread, &attr, - (void * (*)())proc, (void *)clientData) && + (void * (*)(void *))proc, (void *)clientData) && pthread_create(&theThread, NULL, - (void * (*)())proc, (void *)clientData)) { + (void * (*)(void *))proc, (void *)clientData)) { result = TCL_ERROR; } else { *idPtr = (Tcl_ThreadId)theThread; @@ -154,23 +145,26 @@ TclpThreadCreate(idPtr, proc, clientData, stackSize, flags) * TCL_OK if the wait was successful, TCL_ERROR else. * * Side effects: - * The result area is set to the exit code of the thread we - * waited upon. + * The result area is set to the exit code of the thread we waited upon. * *---------------------------------------------------------------------- */ int -Tcl_JoinThread(threadId, state) - Tcl_ThreadId threadId; /* Id of the thread to wait upon */ - int* state; /* Reference to the storage the result - * of the thread we wait upon will be - * written into. */ +Tcl_JoinThread( + Tcl_ThreadId threadId, /* Id of the thread to wait upon. */ + int *state) /* Reference to the storage the result of the + * thread we wait upon will be written into. + * May be NULL. */ { #ifdef TCL_THREADS int result; + unsigned long retcode, *retcodePtr = &retcode; - result = pthread_join ((pthread_t) threadId, (VOID**) state); + result = pthread_join((pthread_t) threadId, (void**) retcodePtr); + if (state) { + *state = (int) retcode; + } return (result == 0) ? TCL_OK : TCL_ERROR; #else return TCL_ERROR; @@ -195,10 +189,10 @@ Tcl_JoinThread(threadId, state) */ void -TclpThreadExit(status) - int status; +TclpThreadExit( + int status) { - pthread_exit((VOID *)status); + pthread_exit(INT2PTR(status)); } #endif /* TCL_THREADS */ @@ -219,7 +213,7 @@ TclpThreadExit(status) */ Tcl_ThreadId -Tcl_GetCurrentThread() +Tcl_GetCurrentThread(void) { #ifdef TCL_THREADS return (Tcl_ThreadId) pthread_self(); @@ -227,7 +221,6 @@ Tcl_GetCurrentThread() return (Tcl_ThreadId) 0; #endif } - /* *---------------------------------------------------------------------- @@ -235,9 +228,9 @@ Tcl_GetCurrentThread() * TclpInitLock * * This procedure is used to grab a lock that serializes initialization - * and finalization of Tcl. On some platforms this may also initialize - * the mutex used to serialize creation of more mutexes and thread - * local storage keys. + * and finalization of Tcl. On some platforms this may also initialize + * the mutex used to serialize creation of more mutexes and thread local + * storage keys. * * Results: * None. @@ -249,7 +242,7 @@ Tcl_GetCurrentThread() */ void -TclpInitLock() +TclpInitLock(void) { #ifdef TCL_THREADS pthread_mutex_lock(&initLock); @@ -261,28 +254,29 @@ TclpInitLock() * * TclpFinalizeLock * - * This procedure is used to destroy all private resources used in - * this file. + * This procedure is used to destroy all private resources used in this + * file. * * Results: * None. * * Side effects: - * Destroys everything private. TclpInitLock must be held - * entering this function. + * Destroys everything private. TclpInitLock must be held entering this + * function. * *---------------------------------------------------------------------- */ void -TclFinalizeLock () +TclFinalizeLock(void) { #ifdef TCL_THREADS /* * You do not need to destroy mutexes that were created with the - * PTHREAD_MUTEX_INITIALIZER macro. These mutexes do not need - * any destruction: masterLock, allocLock, and initLock. + * PTHREAD_MUTEX_INITIALIZER macro. These mutexes do not need any + * destruction: masterLock, allocLock, and initLock. */ + pthread_mutex_unlock(&initLock); #endif } @@ -292,8 +286,8 @@ TclFinalizeLock () * * TclpInitUnlock * - * This procedure is used to release a lock that serializes initialization - * and finalization of Tcl. + * This procedure is used to release a lock that serializes + * initialization and finalization of Tcl. * * Results: * None. @@ -305,7 +299,7 @@ TclFinalizeLock () */ void -TclpInitUnlock() +TclpInitUnlock(void) { #ifdef TCL_THREADS pthread_mutex_unlock(&initLock); @@ -317,13 +311,12 @@ TclpInitUnlock() * * TclpMasterLock * - * This procedure is used to grab a lock that serializes creation - * and finalization of serialization objects. This interface is - * only needed in finalization; it is hidden during - * creation of the objects. + * This procedure is used to grab a lock that serializes creation and + * finalization of serialization objects. This interface is only needed + * in finalization; it is hidden during creation of the objects. * - * This lock must be different than the initLock because the - * initLock is held during creation of syncronization objects. + * This lock must be different than the initLock because the initLock is + * held during creation of syncronization objects. * * Results: * None. @@ -335,7 +328,7 @@ TclpInitUnlock() */ void -TclpMasterLock() +TclpMasterLock(void) { #ifdef TCL_THREADS pthread_mutex_lock(&masterLock); @@ -348,8 +341,8 @@ TclpMasterLock() * * TclpMasterUnlock * - * This procedure is used to release a lock that serializes creation - * and finalization of synchronization objects. + * This procedure is used to release a lock that serializes creation and + * finalization of synchronization objects. * * Results: * None. @@ -361,7 +354,7 @@ TclpMasterLock() */ void -TclpMasterUnlock() +TclpMasterUnlock(void) { #ifdef TCL_THREADS pthread_mutex_unlock(&masterLock); @@ -374,13 +367,13 @@ TclpMasterUnlock() * * Tcl_GetAllocMutex * - * This procedure returns a pointer to a statically initialized - * mutex for use by the memory allocator. The alloctor must - * use this lock, because all other locks are allocated... + * This procedure returns a pointer to a statically initialized mutex for + * use by the memory allocator. The alloctor must use this lock, because + * all other locks are allocated... * * Results: - * A pointer to a mutex that is suitable for passing to - * Tcl_MutexLock and Tcl_MutexUnlock. + * A pointer to a mutex that is suitable for passing to Tcl_MutexLock and + * Tcl_MutexUnlock. * * Side effects: * None. @@ -389,10 +382,11 @@ TclpMasterUnlock() */ Tcl_Mutex * -Tcl_GetAllocMutex() +Tcl_GetAllocMutex(void) { #ifdef TCL_THREADS - return (Tcl_Mutex *)&allocLockPtr; + pthread_mutex_t **allocLockPtrPtr = &allocLockPtr; + return (Tcl_Mutex *) allocLockPtrPtr; #else return NULL; #endif @@ -405,35 +399,36 @@ Tcl_GetAllocMutex() * * Tcl_MutexLock -- * - * This procedure is invoked to lock a mutex. This procedure - * handles initializing the mutex, if necessary. The caller - * can rely on the fact that Tcl_Mutex is an opaque pointer. - * This routine will change that pointer from NULL after first use. + * This procedure is invoked to lock a mutex. This procedure handles + * initializing the mutex, if necessary. The caller can rely on the fact + * that Tcl_Mutex is an opaque pointer. This routine will change that + * pointer from NULL after first use. * * Results: * None. * * Side effects: - * May block the current thread. The mutex is aquired when - * this returns. Will allocate memory for a pthread_mutex_t - * and initialize this the first time this Tcl_Mutex is used. + * May block the current thread. The mutex is aquired when this returns. + * Will allocate memory for a pthread_mutex_t and initialize this the + * first time this Tcl_Mutex is used. * *---------------------------------------------------------------------- */ void -Tcl_MutexLock(mutexPtr) - Tcl_Mutex *mutexPtr; /* Really (pthread_mutex_t **) */ +Tcl_MutexLock( + Tcl_Mutex *mutexPtr) /* Really (pthread_mutex_t **) */ { pthread_mutex_t *pmutexPtr; + if (*mutexPtr == NULL) { MASTER_LOCK; if (*mutexPtr == NULL) { - /* + /* * Double inside master lock check to avoid a race condition. */ - - pmutexPtr = (pthread_mutex_t *)ckalloc(sizeof(pthread_mutex_t)); + + pmutexPtr = ckalloc(sizeof(pthread_mutex_t)); pthread_mutex_init(pmutexPtr, NULL); *mutexPtr = (Tcl_Mutex)pmutexPtr; TclRememberMutex(mutexPtr); @@ -443,15 +438,14 @@ Tcl_MutexLock(mutexPtr) pmutexPtr = *((pthread_mutex_t **)mutexPtr); pthread_mutex_lock(pmutexPtr); } - /* *---------------------------------------------------------------------- * * Tcl_MutexUnlock -- * - * This procedure is invoked to unlock a mutex. The mutex must - * have been locked by Tcl_MutexLock. + * This procedure is invoked to unlock a mutex. The mutex must have been + * locked by Tcl_MutexLock. * * Results: * None. @@ -463,21 +457,21 @@ Tcl_MutexLock(mutexPtr) */ void -Tcl_MutexUnlock(mutexPtr) - Tcl_Mutex *mutexPtr; /* Really (pthread_mutex_t **) */ +Tcl_MutexUnlock( + Tcl_Mutex *mutexPtr) /* Really (pthread_mutex_t **) */ { - pthread_mutex_t *pmutexPtr = *(pthread_mutex_t **)mutexPtr; + pthread_mutex_t *pmutexPtr = *(pthread_mutex_t **) mutexPtr; + pthread_mutex_unlock(pmutexPtr); } - /* *---------------------------------------------------------------------- * * TclpFinalizeMutex -- * - * This procedure is invoked to clean up one mutex. This is only - * safe to call at the end of time. + * This procedure is invoked to clean up one mutex. This is only safe to + * call at the end of time. * * This assumes the Master Lock is held. * @@ -491,194 +485,26 @@ Tcl_MutexUnlock(mutexPtr) */ void -TclpFinalizeMutex(mutexPtr) - Tcl_Mutex *mutexPtr; +TclpFinalizeMutex( + Tcl_Mutex *mutexPtr) { - pthread_mutex_t *pmutexPtr = *(pthread_mutex_t **)mutexPtr; + pthread_mutex_t *pmutexPtr = *(pthread_mutex_t **) mutexPtr; + if (pmutexPtr != NULL) { - pthread_mutex_destroy(pmutexPtr); - ckfree((char *)pmutexPtr); + pthread_mutex_destroy(pmutexPtr); + ckfree(pmutexPtr); *mutexPtr = NULL; } } - - -/* - *---------------------------------------------------------------------- - * - * TclpThreadDataKeyInit -- - * - * This procedure initializes a thread specific data block key. - * Each thread has table of pointers to thread specific data. - * all threads agree on which table entry is used by each module. - * this is remembered in a "data key", that is just an index into - * this table. To allow self initialization, the interface - * passes a pointer to this key and the first thread to use - * the key fills in the pointer to the key. The key should be - * a process-wide static. - * - * Results: - * None. - * - * Side effects: - * Will allocate memory the first time this process calls for - * this key. In this case it modifies its argument - * to hold the pointer to information about the key. - * - *---------------------------------------------------------------------- - */ - -void -TclpThreadDataKeyInit(keyPtr) - Tcl_ThreadDataKey *keyPtr; /* Identifier for the data chunk, - * really (pthread_key_t **) */ -{ - pthread_key_t *pkeyPtr; - - MASTER_LOCK; - if (*keyPtr == NULL) { - pkeyPtr = (pthread_key_t *)ckalloc(sizeof(pthread_key_t)); - pthread_key_create(pkeyPtr, NULL); - *keyPtr = (Tcl_ThreadDataKey)pkeyPtr; - TclRememberDataKey(keyPtr); - } - MASTER_UNLOCK; -} - -/* - *---------------------------------------------------------------------- - * - * TclpThreadDataKeyGet -- - * - * This procedure returns a pointer to a block of thread local storage. - * - * Results: - * A thread-specific pointer to the data structure, or NULL - * if the memory has not been assigned to this key for this thread. - * - * Side effects: - * None. - * - *---------------------------------------------------------------------- - */ - -VOID * -TclpThreadDataKeyGet(keyPtr) - Tcl_ThreadDataKey *keyPtr; /* Identifier for the data chunk, - * really (pthread_key_t **) */ -{ - pthread_key_t *pkeyPtr = *(pthread_key_t **)keyPtr; - if (pkeyPtr == NULL) { - return NULL; - } else { - return (VOID *)pthread_getspecific(*pkeyPtr); - } -} - - -/* - *---------------------------------------------------------------------- - * - * TclpThreadDataKeySet -- - * - * This procedure sets the pointer to a block of thread local storage. - * - * Results: - * None. - * - * Side effects: - * Sets up the thread so future calls to TclpThreadDataKeyGet with - * this key will return the data pointer. - * - *---------------------------------------------------------------------- - */ - -void -TclpThreadDataKeySet(keyPtr, data) - Tcl_ThreadDataKey *keyPtr; /* Identifier for the data chunk, - * really (pthread_key_t **) */ - VOID *data; /* Thread local storage */ -{ - pthread_key_t *pkeyPtr = *(pthread_key_t **)keyPtr; - pthread_setspecific(*pkeyPtr, data); -} - -/* - *---------------------------------------------------------------------- - * - * TclpFinalizeThreadData -- - * - * This procedure cleans up the thread-local storage. This is - * called once for each thread. - * - * Results: - * None. - * - * Side effects: - * Frees up all thread local storage. - * - *---------------------------------------------------------------------- - */ - -void -TclpFinalizeThreadData(keyPtr) - Tcl_ThreadDataKey *keyPtr; -{ - VOID *result; - pthread_key_t *pkeyPtr; - - if (*keyPtr != NULL) { - pkeyPtr = *(pthread_key_t **)keyPtr; - result = (VOID *)pthread_getspecific(*pkeyPtr); - if (result != NULL) { - ckfree((char *)result); - pthread_setspecific(*pkeyPtr, (void *)NULL); - } - } -} - -/* - *---------------------------------------------------------------------- - * - * TclpFinalizeThreadDataKey -- - * - * This procedure is invoked to clean up one key. This is a - * process-wide storage identifier. The thread finalization code - * cleans up the thread local storage itself. - * - * This assumes the master lock is held. - * - * Results: - * None. - * - * Side effects: - * The key is deallocated. - * - *---------------------------------------------------------------------- - */ - -void -TclpFinalizeThreadDataKey(keyPtr) - Tcl_ThreadDataKey *keyPtr; -{ - pthread_key_t *pkeyPtr; - if (*keyPtr != NULL) { - pkeyPtr = *(pthread_key_t **)keyPtr; - pthread_key_delete(*pkeyPtr); - ckfree((char *)pkeyPtr); - *keyPtr = NULL; - } -} - /* *---------------------------------------------------------------------- * * Tcl_ConditionWait -- * - * This procedure is invoked to wait on a condition variable. - * The mutex is automically released as part of the wait, and - * automatically grabbed when the condition is signaled. + * This procedure is invoked to wait on a condition variable. The mutex + * is automically released as part of the wait, and automatically grabbed + * when the condition is signaled. * * The mutex must be held when this procedure is called. * @@ -686,18 +512,18 @@ TclpFinalizeThreadDataKey(keyPtr) * None. * * Side effects: - * May block the current thread. The mutex is aquired when - * this returns. Will allocate memory for a pthread_mutex_t - * and initialize this the first time this Tcl_Mutex is used. + * May block the current thread. The mutex is aquired when this returns. + * Will allocate memory for a pthread_mutex_t and initialize this the + * first time this Tcl_Mutex is used. * *---------------------------------------------------------------------- */ void -Tcl_ConditionWait(condPtr, mutexPtr, timePtr) - Tcl_Condition *condPtr; /* Really (pthread_cond_t **) */ - Tcl_Mutex *mutexPtr; /* Really (pthread_mutex_t **) */ - Tcl_Time *timePtr; /* Timeout on waiting period */ +Tcl_ConditionWait( + Tcl_Condition *condPtr, /* Really (pthread_cond_t **) */ + Tcl_Mutex *mutexPtr, /* Really (pthread_mutex_t **) */ + const Tcl_Time *timePtr) /* Timeout on waiting period */ { pthread_cond_t *pcondPtr; pthread_mutex_t *pmutexPtr; @@ -706,15 +532,15 @@ Tcl_ConditionWait(condPtr, mutexPtr, timePtr) if (*condPtr == NULL) { MASTER_LOCK; - /* - * Double check inside mutex to avoid race, - * then initialize condition variable if necessary. + /* + * Double check inside mutex to avoid race, then initialize condition + * variable if necessary. */ if (*condPtr == NULL) { - pcondPtr = (pthread_cond_t *)ckalloc(sizeof(pthread_cond_t)); + pcondPtr = ckalloc(sizeof(pthread_cond_t)); pthread_cond_init(pcondPtr, NULL); - *condPtr = (Tcl_Condition)pcondPtr; + *condPtr = (Tcl_Condition) pcondPtr; TclRememberCondition(condPtr); } MASTER_UNLOCK; @@ -746,8 +572,8 @@ Tcl_ConditionWait(condPtr, mutexPtr, timePtr) * * This procedure is invoked to signal a condition variable. * - * The mutex must be held during this call to avoid races, - * but this interface does not enforce that. + * The mutex must be held during this call to avoid races, but this + * interface does not enforce that. * * Results: * None. @@ -759,8 +585,8 @@ Tcl_ConditionWait(condPtr, mutexPtr, timePtr) */ void -Tcl_ConditionNotify(condPtr) - Tcl_Condition *condPtr; +Tcl_ConditionNotify( + Tcl_Condition *condPtr) { pthread_cond_t *pcondPtr = *((pthread_cond_t **)condPtr); if (pcondPtr != NULL) { @@ -771,15 +597,14 @@ Tcl_ConditionNotify(condPtr) */ } } - /* *---------------------------------------------------------------------- * * TclpFinalizeCondition -- * - * This procedure is invoked to clean up a condition variable. - * This is only safe to call at the end of time. + * This procedure is invoked to clean up a condition variable. This is + * only safe to call at the end of time. * * This assumes the Master Lock is held. * @@ -793,13 +618,14 @@ Tcl_ConditionNotify(condPtr) */ void -TclpFinalizeCondition(condPtr) - Tcl_Condition *condPtr; +TclpFinalizeCondition( + Tcl_Condition *condPtr) { pthread_cond_t *pcondPtr = *(pthread_cond_t **)condPtr; + if (pcondPtr != NULL) { pthread_cond_destroy(pcondPtr); - ckfree((char *)pcondPtr); + ckfree(pcondPtr); *condPtr = NULL; } } @@ -808,10 +634,10 @@ TclpFinalizeCondition(condPtr) /* *---------------------------------------------------------------------- * - * TclpReaddir, TclpLocaltime, TclpGmtime, TclpInetNtoa -- + * TclpReaddir, TclpInetNtoa -- * - * These procedures replace core C versions to be used in a - * threaded environment. + * These procedures replace core C versions to be used in a threaded + * environment. * * Results: * See documentation of C functions. @@ -819,84 +645,47 @@ TclpFinalizeCondition(condPtr) * Side effects: * See documentation of C functions. * + * Notes: + * TclpReaddir is no longer used by the core (see 1095909), but it + * appears in the internal stubs table (see #589526). + * *---------------------------------------------------------------------- */ -#if defined(TCL_THREADS) && !defined(HAVE_READDIR_R) -TCL_DECLARE_MUTEX( rdMutex ) -#undef readdir -#endif - Tcl_DirEntry * -TclpReaddir(DIR * dir) +TclpReaddir( + DIR * dir) { - Tcl_DirEntry *ent; -#ifdef TCL_THREADS - ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); - -#ifdef HAVE_READDIR_R - ent = &tsdPtr->rdbuf.ent; -# ifdef HAVE_TWO_ARG_READDIR_R - if (TclOSreaddir_r(dir, ent) != 0) { -# else /* HAVE_THREE_ARG_READDIR_R */ - if (TclOSreaddir_r(dir, ent, &ent) != 0) { -# endif /* HAVE_TWO_ARG_READDIR_R */ - ent = NULL; - } - -#else /* !HAVE_READDIR_R */ - - Tcl_MutexLock(&rdMutex); -# ifdef HAVE_STRUCT_DIRENT64 - ent = readdir64(dir); -# else /* !HAVE_STRUCT_DIRENT64 */ - ent = readdir(dir); -# endif /* HAVE_STRUCT_DIRENT64 */ - if (ent != NULL) { - memcpy((VOID *) &tsdPtr->rdbuf.ent, (VOID *) ent, - sizeof(tsdPtr->rdbuf)); - ent = &tsdPtr->rdbuf.ent; - } - Tcl_MutexUnlock(&rdMutex); - -#endif /* HAVE_READDIR_R */ -#else -# ifdef HAVE_STRUCT_DIRENT64 - ent = readdir64(dir); -# else /* !HAVE_STRUCT_DIRENT64 */ - ent = readdir(dir); -# endif /* HAVE_STRUCT_DIRENT64 */ -#endif - return ent; + return TclOSreaddir(dir); } + +#undef TclpInetNtoa char * -TclpInetNtoa(struct in_addr addr) +TclpInetNtoa( + struct in_addr addr) { #ifdef TCL_THREADS ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); - union { - unsigned long l; - unsigned char b[4]; - } u; - - u.l = (unsigned long) addr.s_addr; - sprintf(tsdPtr->nabuf, "%u.%u.%u.%u", u.b[0], u.b[1], u.b[2], u.b[3]); + unsigned char *b = (unsigned char*) &addr.s_addr; + + sprintf(tsdPtr->nabuf, "%u.%u.%u.%u", b[0], b[1], b[2], b[3]); return tsdPtr->nabuf; #else return inet_ntoa(addr); #endif } - -#if defined(TCL_THREADS) && defined(USE_THREAD_ALLOC) && !defined(TCL_MEM_DEBUG) + +#ifdef TCL_THREADS /* * Additions by AOL for specialized thread memory allocator. */ + #ifdef USE_THREAD_ALLOC static volatile int initialized = 0; -static pthread_key_t key; +static pthread_key_t key; typedef struct allocMutex { - Tcl_Mutex tlock; + Tcl_Mutex tlock; pthread_mutex_t plock; } allocMutex; @@ -904,38 +693,50 @@ Tcl_Mutex * TclpNewAllocMutex(void) { struct allocMutex *lockPtr; + register pthread_mutex_t *plockPtr; lockPtr = malloc(sizeof(struct allocMutex)); if (lockPtr == NULL) { - panic("could not allocate lock"); + Tcl_Panic("could not allocate lock"); } - lockPtr->tlock = (Tcl_Mutex) &lockPtr->plock; + plockPtr = &lockPtr->plock; + lockPtr->tlock = (Tcl_Mutex) plockPtr; pthread_mutex_init(&lockPtr->plock, NULL); return &lockPtr->tlock; } void -TclpFreeAllocMutex(mutex) - Tcl_Mutex *mutex; /* The alloc mutex to free. */ +TclpFreeAllocMutex( + Tcl_Mutex *mutex) /* The alloc mutex to free. */ { allocMutex* lockPtr = (allocMutex*) mutex; - if (!lockPtr) return; + if (!lockPtr) { + return; + } pthread_mutex_destroy(&lockPtr->plock); free(lockPtr); } -void TclpFreeAllocCache(ptr) - void *ptr; +void +TclpFreeAllocCache( + void *ptr) { - extern void TclFreeAllocCache(void *); + if (ptr != NULL) { + /* + * Called by the pthread lib when a thread exits + */ - TclFreeAllocCache(ptr); - /* - * Perform proper cleanup of things done in TclpGetAllocCache. - */ - if (initialized) { - pthread_key_delete(key); - initialized = 0; + TclFreeAllocCache(ptr); + pthread_setspecific(key, NULL); + + } else if (initialized) { + /* + * Called by us in TclFinalizeThreadAlloc() during the library + * finalization initiated from Tcl_Finalize() + */ + + pthread_key_delete(key); + initialized = 0; } } @@ -954,10 +755,70 @@ TclpGetAllocCache(void) } void -TclpSetAllocCache(void *arg) +TclpSetAllocCache( + void *arg) { pthread_setspecific(key, arg); } - #endif /* USE_THREAD_ALLOC */ + +void * +TclpThreadCreateKey(void) +{ + pthread_key_t *ptkeyPtr; + + ptkeyPtr = TclpSysAlloc(sizeof *ptkeyPtr, 0); + if (NULL == ptkeyPtr) { + Tcl_Panic("unable to allocate thread key!"); + } + + if (pthread_key_create(ptkeyPtr, NULL)) { + Tcl_Panic("unable to create pthread key!"); + } + + return ptkeyPtr; +} + +void +TclpThreadDeleteKey( + void *keyPtr) +{ + pthread_key_t *ptkeyPtr = keyPtr; + + if (pthread_key_delete(*ptkeyPtr)) { + Tcl_Panic("unable to delete key!"); + } + + TclpSysFree(keyPtr); +} + +void +TclpThreadSetMasterTSD( + void *tsdKeyPtr, + void *ptr) +{ + pthread_key_t *ptkeyPtr = tsdKeyPtr; + + if (pthread_setspecific(*ptkeyPtr, ptr)) { + Tcl_Panic("unable to set master TSD value"); + } +} + +void * +TclpThreadGetMasterTSD( + void *tsdKeyPtr) +{ + pthread_key_t *ptkeyPtr = tsdKeyPtr; + + return pthread_getspecific(*ptkeyPtr); +} + #endif /* TCL_THREADS */ + +/* + * Local Variables: + * mode: c + * c-basic-offset: 4 + * fill-column: 78 + * End: + */ |