diff options
Diffstat (limited to 'win/aclocal.m4')
| -rw-r--r-- | win/aclocal.m4 | 446 |
1 files changed, 1 insertions, 445 deletions
diff --git a/win/aclocal.m4 b/win/aclocal.m4 index 50a23cf..bc7540d 100644 --- a/win/aclocal.m4 +++ b/win/aclocal.m4 @@ -1,445 +1 @@ -#------------------------------------------------------------------------ -# SC_PATH_TCLCONFIG -- -# -# Locate the tclConfig.sh file and perform a sanity check on -# the Tcl compile flags -# Currently a no-op for Windows -# -# Arguments: -# PATCH_LEVEL The patch level for Tcl if any. -# -# Results: -# -# Adds the following arguments to configure: -# --with-tcl=... -# -# Sets the following vars: -# TCL_BIN_DIR Full path to the tclConfig.sh file -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PATH_TCLCONFIG, [ - AC_MSG_CHECKING([the location of tclConfig.sh]) - - if test -d ../../tcl8.2$1/win; then - TCL_BIN_DIR_DEFAULT=../../tcl8.2$1/win - else - TCL_BIN_DIR_DEFAULT=../../tcl8.2/win - fi - - AC_ARG_WITH(tcl, [ --with-tcl=DIR use Tcl 8.2 binaries from DIR], - TCL_BIN_DIR=$withval, TCL_BIN_DIR=`cd $TCL_BIN_DIR_DEFAULT; pwd`) - if test ! -d $TCL_BIN_DIR; then - AC_MSG_ERROR(Tcl directory $TCL_BIN_DIR does not exist) - fi - if test ! -f $TCL_BIN_DIR/tclConfig.sh; then - AC_MSG_ERROR(There is no tclConfig.sh in $TCL_BIN_DIR: perhaps you did not specify the Tcl *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?) - fi - AC_MSG_RESULT($TCL_BIN_DIR/tclConfig.sh) -]) - -#------------------------------------------------------------------------ -# SC_PATH_TKCONFIG -- -# -# Locate the tkConfig.sh file -# Currently a no-op for Windows -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-tk=... -# -# Sets the following vars: -# TK_BIN_DIR Full path to the tkConfig.sh file -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PATH_TKCONFIG, [ - AC_MSG_CHECKING([the location of tkConfig.sh]) - - if test -d ../../tk8.2$1/win; then - TK_BIN_DIR_DEFAULT=../../tk8.2$1/win - else - TK_BIN_DIR_DEFAULT=../../tk8.2/win - fi - - AC_ARG_WITH(tk, [ --with-tk=DIR use Tk 8.2 binaries from DIR], - TK_BIN_DIR=$withval, TK_BIN_DIR=`cd $TK_BIN_DIR_DEFAULT; pwd`) - if test ! -d $TK_BIN_DIR; then - AC_MSG_ERROR(Tk directory $TK_BIN_DIR does not exist) - fi - if test ! -f $TK_BIN_DIR/tkConfig.sh; then - AC_MSG_ERROR(There is no tkConfig.sh in $TK_BIN_DIR: perhaps you did not specify the Tk *build* directory (not the toplevel Tk directory) or you forgot to configure Tk?) - fi - - AC_MSG_RESULT($TK_BIN_DIR/tkConfig.sh) -]) - -#------------------------------------------------------------------------ -# SC_LOAD_TCLCONFIG -- -# -# Load the tclConfig.sh file -# Currently a no-op for Windows -# -# Arguments: -# -# Requires the following vars to be set: -# TCL_BIN_DIR -# -# Results: -# -# Subst the following vars: -# TCL_BIN_DIR -# TCL_SRC_DIR -# TCL_LIB_FILE -# -#------------------------------------------------------------------------ - -AC_DEFUN(SC_LOAD_TCLCONFIG, [ - AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh]) - - if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then - AC_MSG_RESULT([loading]) - . $TCL_BIN_DIR/tclConfig.sh - else - AC_MSG_RESULT([file not found]) - fi - - # The eval is required to do the TCL_DBGX substitution in the - # TCL_LIB_FILE variable. - - eval TCL_LIB_FILE=${TCL_LIB_FILE} - eval TCL_LIB_FLAG=${TCL_LIB_FLAG} - - AC_SUBST(TCL_BIN_DIR) - AC_SUBST(TCL_SRC_DIR) - AC_SUBST(TCL_LIB_FILE) -]) - -#------------------------------------------------------------------------ -# SC_LOAD_TKCONFIG -- -# -# Load the tkConfig.sh file -# Currently a no-op for Windows -# -# Arguments: -# -# Requires the following vars to be set: -# TK_BIN_DIR -# -# Results: -# -# Sets the following vars that should be in tkConfig.sh: -# TK_BIN_DIR -#------------------------------------------------------------------------ - -AC_DEFUN(SC_LOAD_TKCONFIG, [ - AC_MSG_CHECKING([for existence of $TCLCONFIG]) - - if test -f "$TK_BIN_DIR/tkConfig.sh" ; then - AC_MSG_CHECKING([loading $TK_BIN_DIR/tkConfig.sh]) - . $TK_BIN_DIR/tkConfig.sh - else - AC_MSG_RESULT([could not find $TK_BIN_DIR/tkConfig.sh]) - fi - - - AC_SUBST(TK_BIN_DIR) - AC_SUBST(TK_SRC_DIR) - AC_SUBST(TK_LIB_FILE) -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_GCC -- -# -# Allows the use of GCC if available -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-gcc -# -# Sets the following vars: -# CC Command to use for the compiler -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_GCC, [ - AC_ARG_ENABLE(gcc, [ --enable-gcc allow use of gcc if available [--disable-gcc]], - [ok=$enableval], [ok=no]) - if test "$ok" = "yes"; then - CC=gcc - AC_PROG_CC - else - CC=cl - fi -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_SHARED -- -# -# Allows the building of shared libraries -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-shared=yes|no -# -# Defines the following vars: -# STATIC_BUILD Used for building import/export libraries -# on Windows. -# -# Sets the following vars: -# SHARED_BUILD Value of 1 or 0 -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_SHARED, [ - AC_MSG_CHECKING([how to build libraries]) - AC_ARG_ENABLE(shared, - [ --enable-shared build and link with shared libraries [--enable-shared]], - [tcl_ok=$enableval], [tcl_ok=yes]) - - if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - tcl_ok=$enableval - else - tcl_ok=yes - fi - - if test "$tcl_ok" = "yes" ; then - AC_MSG_RESULT([shared]) - SHARED_BUILD=1 - else - AC_MSG_RESULT([static]) - SHARED_BUILD=0 - AC_DEFINE(STATIC_BUILD) - fi -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_THREADS -- -# -# Specify if thread support should be enabled -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-threads=yes|no -# -# Defines the following vars: -# TCL_THREADS -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_THREADS, [ - AC_MSG_CHECKING(for building with threads) - AC_ARG_ENABLE(threads, [ --enable-threads build with threads], - [tcl_ok=$enableval], [tcl_ok=no]) - - if test "$tcl_ok" = "yes"; then - AC_MSG_RESULT(yes) - TCL_THREADS=1 - AC_DEFINE(TCL_THREADS) - else - TCL_THREADS=0 - AC_MSG_RESULT(no (default)) - fi -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_SYMBOLS -- -# -# Specify if debugging symbols should be used -# -# Arguments: -# none -# -# Requires the following vars to be set: -# CFLAGS_DEBUG -# CFLAGS_OPTIMIZE -# -# Results: -# -# Adds the following arguments to configure: -# --enable-symbols -# -# Defines the following vars: -# CFLAGS_DEFAULT Sets to CFLAGS_DEBUG if true -# Sets to CFLAGS_OPTIMIZE if false -# LDFLAGS_DEFAULT Sets to LDFLAGS_DEBUG if true -# Sets to LDFLAGS_OPTIMIZE if false -# DBGX Debug library extension -# -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_SYMBOLS, [ - AC_MSG_CHECKING([for build with symbols]) - AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols [--disable-symbols]], [tcl_ok=$enableval], [tcl_ok=no]) - - if test "$tcl_ok" = "yes"; then - CFLAGS_DEFAULT="${CFLAGS_DEBUG}" - LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" - DBGX=d - AC_MSG_RESULT([yes]) - else - CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}" - LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" - DBGX="" - AC_MSG_RESULT([no]) - fi -]) - - -#-------------------------------------------------------------------- -# SC_CONFIG_CFLAGS -# -# Try to determine the proper flags to pass to the compiler -# for building shared libraries and other such nonsense. -# -# NOTE: The backslashes in quotes below are substituted twice -# due to the fact that they are in a macro and then inlined -# in the final configure script. -# -# Arguments: -# none -# -# Results: -# -# Defines the following vars for all compilers: -# EXTRA_CFLAGS -# CFLAGS_DEBUG -# CFLAGS_OPTIMIZE -# CFLAGS_WARNING -# LDFLAGS_DEBUG -# LDFLAGS_OPTIMIZE -# PATHTYPE -# CC_OBJNAME -# CC_EXENAME -# -# Defines the following vars for non-gcc compilers -# SHLIB_LD -# SHLIB_LD_LIBS -# LIBS -# AR -# MAKE_LIB -# MAKE_EXE -# MAKE_DLL -# -# LIBSUFFIX -# LIBRARIES -# EXESUFFIX -# DLLSUFFIX -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_CONFIG_CFLAGS, [ - AC_MSG_CHECKING([compiler flags]) - EXTRA_CFLAGS="" - # set various compiler flags depending on whether we are using gcc or cl - - if test "${GCC}" = "yes" ; then - CFLAGS_DEBUG=-g - CFLAGS_OPTIMIZE=-O - CFLAGS_WARNING="-Wall -Wconversion" - LDFLAGS_DEBUG=-g - LDFLAGS_OPTIMIZE=-O - PATHTYPE=-u - - # Specify the CC output file names based on the target name - CC_OBJNAME="-o \[$]@" - CC_EXENAME="-o \[$]@" - else - SHLIB_LD="link -dll -nologo" - SHLIB_LD_LIBS="user32.lib advapi32.lib" - LIBS="user32.lib advapi32.lib" - AR="lib -nologo" - STLIB_LD="lib -nologo" - RC="rc" - MAKE_LIB="\${AR} -out:\[$]@" - MAKE_EXE="\${CC} -Fe\[$]@" - - if test "${SHARED_BUILD}" = "0" ; then - # static - AC_MSG_RESULT([using static flags]) - runtime=-MT - MAKE_DLL="echo " - LIBSUFFIX="s\${DBGX}.lib" - LIBRARIES="\${STATIC_LIBRARIES}" - EXESUFFIX="s\${DBGX}.exe" - DLLSUFFIX="" - else - # dynamic - AC_MSG_RESULT([using shared flags]) - runtime=-MD - MAKE_DLL="\${SHLIB_LD} \${SHLIB_LD_LIBS} \$(LDFLAGS) -out:\[$]@" - LIBSUFFIX="\${DBGX}.lib" - DLLSUFFIX="\${DBGX}.dll" - EXESUFFIX="\${DBGX}.exe" - LIBRARIES="\${SHARED_LIBRARIES}" - fi - - EXTRA_CFLAGS="-YX" - CFLAGS_DEBUG="-nologo -Z7 -Od -WX ${runtime}d" -# CFLAGS_OPTIMIZE="-nologo -O2 -Gs -GD ${runtime}" - CFLAGS_OPTIMIZE="-nologo -Oti -Gs -GD ${runtime}" - CFLAGS_WARNING="-W3" - LDFLAGS_DEBUG="-debug:full -debugtype:cv" - LDFLAGS_OPTIMIZE="-release" - PATHTYPE=-w - - # Specify the CC output file names based on the target name - CC_OBJNAME="-Fo\[$]@" - CC_EXENAME="-Fe\"\$(shell cygpath \$(PATHTYPE) '\[$]@')\"" - - # Specify linker flags depending on the type of app being - # built -- Console vs. Window. - LDFLAGS_CONSOLE="-subsystem:console" - LDFLAGS_WINDOW="-subsystem:windows" - fi -]) - -#------------------------------------------------------------------------ -# SC_WITH_TCL -- -# -# Location of the Tcl build directory. -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-tcl=... -# -# Defines the following vars: -# TCL_BIN_DIR Full path to the tcl build dir. -#------------------------------------------------------------------------ - -AC_DEFUN(SC_WITH_TCL, [ - if test -d ../../tcl8.2$1/win; then - TCL_BIN_DEFAULT=../../tcl8.2$1/win - else - TCL_BIN_DEFAULT=../../tcl8.2/win - fi - - AC_ARG_WITH(tcl, [ --with-tcl=DIR use Tcl 8.2 binaries from DIR], - TCL_BIN_DIR=$withval, TCL_BIN_DIR=`cd $TCL_BIN_DEFAULT; pwd`) - if test ! -d $TCL_BIN_DIR; then - AC_MSG_ERROR(Tcl directory $TCL_BIN_DIR does not exist) - fi - if test ! -f $TCL_BIN_DIR/Makefile; then - AC_MSG_ERROR(There is no Makefile in $TCL_BIN_DIR: perhaps you did not specify the Tcl *build* directory (not the toplevel Tcl directory) or you forgot to configure Tcl?) - else - echo "building against Tcl binaries in: $TCL_BIN_DIR" - fi - AC_SUBST(TCL_BIN_DIR) -]) - +builtin(include,tcl.m4) |