summaryrefslogtreecommitdiffstats
path: root/win/makefile.bc
diff options
context:
space:
mode:
Diffstat (limited to 'win/makefile.bc')
-rw-r--r--win/makefile.bc1194
1 files changed, 597 insertions, 597 deletions
diff --git a/win/makefile.bc b/win/makefile.bc
index 3310b01..6421682 100644
--- a/win/makefile.bc
+++ b/win/makefile.bc
@@ -1,597 +1,597 @@
-#
-# Makefile for Borland C++ 5.5 (or C++ Builder 5), adapted from the makefile
-# for Visual C++ that came with tcl 8.3.3
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# Copyright (c) 1995-1996 Sun Microsystems, Inc.
-# Copyright (c) 1998-1999 by Scriptics Corporation.
-
-# TIP #59 information.
-#
-# This makefile does not set the following configuration cpp
-# defines. Behind the defines are the makefile variables listed to set
-# to -D... when that feature is enabled.
-#
-# - TCL_CFG_PROFILED PROFDEFINES
-# - TCL_CFG_OPTIMIZED OPTDEFINES
-# - TCL_CFG_DO64BIT SIXFOURDEFINES
-
-# Have a look at the complete description on how to build and test Tcl with
-# the current Borland compilers at www.ratiosoft.com/tcl/borland.
-#
-# Usage:
-# - Adapt the paths below to match your compiler's location
-# - Make sure the compiler's bin directory is on your path
-# - Open a console
-# - To make a debug version enter
-# make -fmakefile.bc -DNODEBUG=0 xxx
-# where 'xxx' is the target you want (e.g. 'all', 'test', ...)
-# Please note: I omitted the 'd' suffix for debug versions because Tcl
-# will always call tclpip83.dll and not tclpip83d.dll, causing an error.
-# ^
-# Besides, the debug version goes into a separate directory, so there
-# should be no problem having DLLs and EXEs with the same name.
-# If you prefer your debug version having the 'd' suffix just uncomment
-# the line
-# #DBGX = d
-#
-# - To make a 'normal' version enter
-# make -fmakefile.bc xxx
-# where 'xxx' is the target you want (e.g. 'all', 'test', ...)
-#
-# DISCLAIMER:
-# This makefile has an experimental status - that is those targets which
-# have been modified do in fact compile and link with Borland's C++
-# Builder 5 and with the free Borland compiler (Borland C++ 5.5).
-# However the author assumes no responsiblity for any effect which the use of
-# this makefile or of the resulting programs might have on your system.
-#
-# Not yet modified:
-# - The 'plug-in-DLL' and the associated shell.
-# - The programs to create the windows help files.
-#
-# Suggestions and / or improvements are always welcome.
-#
-# May 2001, H. Giese (hgiese@ratiosoft.com)
-#
-
-# Does not depend on the presence of any environment variables in
-# order to compile tcl; all needed information is derived from
-# location of the compiler directories.
-
-#
-# Project directories
-#
-# ROOT = top of source tree
-#
-# TOOLS32 = location of Borland development tools.
-#
-# INSTALLDIR = where the install-targets should copy the binaries and
-# support files
-#
-
-ROOT = ..
-INSTALLDIR = c:\program files\tcl
-
-# If you have C++ Builder 5 or the free Borland C++ 5.5 compiler
-# adapt the following paths as appropriate for your system
-TOOLS32 = c:\dev\bcc55
-TOOLS32_rc = c:\dev\bcc55
-#TOOLS32 = c:\bc55
-#TOOLS32_rc = c:\bc55
-
-cc32 = "$(TOOLS32)\bin\bcc32.exe"
-link32 = "$(TOOLS32)\bin\ilink32.exe"
-lib32 = "$(TOOLS32)\bin\tlib.exe"
-rc32 = "$(TOOLS32_rc)\bin\brcc32.exe"
-include32 = -I"$(TOOLS32)\include"
-libpath32 = -L"$(TOOLS32)\lib"
-
-# Uncomment the following line to compile with thread support
-#THREADDEFINES = -DTCL_THREADS=1
-
-# Allow definition of NDEBUG via command line
-# Set NODEBUG to 0 to compile with symbols
-!if !defined(NODEBUG)
-NODEBUG = 1
-!endif
-
-# CFG_ENCODING=encoding
-# name of encoding for configuration information. Defaults
-# to cp1252
-!if !defined(CFG_ENCODING)
-CFG_ENCODING = \"cp1252\"
-!endif
-
-# The following defines can be used to control the amount of debugging
-# code that is added to the compilation.
-#
-# -DTCL_MEM_DEBUG Enables the debugging memory allocator.
-# -DTCL_COMPILE_DEBUG Enables byte compilation logging.
-# -DTCL_COMPILE_STATS Enables byte compilation statistics gathering.
-# -DUSE_TCLALLOC=0 Disables the Tcl memory allocator in favor
-# of the native malloc implementation. This is
-# needed when using Purify.
-#
-#DEBUGDEFINES = -DTCL_MEM_DEBUG -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
-#DEBUGDEFINES = -DUSE_TCLALLOC=0
-
-######################################################################
-# Do not modify below this line
-######################################################################
-
-NAMEPREFIX = tcl
-STUBPREFIX = $(NAMEPREFIX)stub
-DOTVERSION = 8.5
-VERSION = 85
-
-DDEVERSION = 13
-DDEDOTVERSION = 1.3
-
-REGVERSION = 12
-REGDOTVERSION = 1.2
-
-BINROOT = ..
-!IF "$(NODEBUG)" == "1"
-TMPDIRNAME = Release
-DBGX =
-SYMDEFINES = -DNDEBUG
-!ELSE
-TMPDIRNAME = Debug
-#DBGX = d
-DBGX =
-SYMDEFINES = -DTCL_CFG_DEBUG
-!ENDIF
-TMPDIR = $(BINROOT)\$(TMPDIRNAME)
-OUTDIRNAME = $(TMPDIRNAME)
-OUTDIR = $(TMPDIR)
-
-TCLLIB = $(OUTDIR)\$(NAMEPREFIX)$(VERSION)$(DBGX).lib
-TCLDLLNAME = $(NAMEPREFIX)$(VERSION)$(DBGX).dll
-TCLDLL = $(OUTDIR)\$(TCLDLLNAME)
-
-TCLSTUBLIBNAME = $(STUBPREFIX)$(VERSION)$(DBGX).lib
-TCLSTUBLIB = $(OUTDIR)\$(TCLSTUBLIBNAME)
-
-TCLPLUGINLIB = $(OUTDIR)\$(NAMEPREFIX)$(VERSION)p$(DBGX).lib
-TCLPLUGINDLLNAME = $(NAMEPREFIX)$(VERSION)p$(DBGX).dll
-TCLPLUGINDLL = $(OUTDIR)\$(TCLPLUGINDLLNAME)
-TCLSH = $(OUTDIR)\$(NAMEPREFIX)sh$(VERSION)$(DBGX).exe
-TCLSHP = $(OUTDIR)\$(NAMEPREFIX)shp$(VERSION)$(DBGX).exe
-TCLPIPEDLLNAME = $(NAMEPREFIX)pip$(VERSION)$(DBGX).dll
-TCLPIPEDLL = $(OUTDIR)\$(TCLPIPEDLLNAME)
-TCLREGDLLNAME = $(NAMEPREFIX)reg$(REGVERSION)$(DBGX).dll
-TCLREGDLL = $(OUTDIR)\$(TCLREGDLLNAME)
-TCLDDEDLLNAME = $(NAMEPREFIX)dde$(DDEVERSION)$(DBGX).dll
-TCLDDEDLL = $(OUTDIR)\$(TCLDDEDLLNAME)
-TCLTEST = $(OUTDIR)\$(NAMEPREFIX)test.exe
-CAT32 = $(TMPDIR)\cat32.exe
-RMDIR = .\rmd.bat
-MKDIR = .\mkd.bat
-RM = del
-
-LIB_INSTALL_DIR = $(INSTALLDIR)\lib
-BIN_INSTALL_DIR = $(INSTALLDIR)\bin
-SCRIPT_INSTALL_DIR = $(INSTALLDIR)\lib\tcl$(DOTVERSION)
-INCLUDE_INSTALL_DIR = $(INSTALLDIR)\include
-
-TCLSHOBJS = \
- $(TMPDIR)\tclAppInit.obj
-
-TCLTESTOBJS = \
- $(TMPDIR)\tclTest.obj \
- $(TMPDIR)\tclTestObj.obj \
- $(TMPDIR)\tclTestProcBodyObj.obj \
- $(TMPDIR)\tclThreadTest.obj \
- $(TMPDIR)\tclWinTest.obj \
- $(TMPDIR)\testMain.obj
-
-TCLOBJS = \
- $(TMPDIR)\regcomp.obj \
- $(TMPDIR)\regexec.obj \
- $(TMPDIR)\regfree.obj \
- $(TMPDIR)\regerror.obj \
- $(TMPDIR)\tclAlloc.obj \
- $(TMPDIR)\tclAsync.obj \
- $(TMPDIR)\tclBasic.obj \
- $(TMPDIR)\tclBinary.obj \
- $(TMPDIR)\tclCkalloc.obj \
- $(TMPDIR)\tclClock.obj \
- $(TMPDIR)\tclCmdAH.obj \
- $(TMPDIR)\tclCmdIL.obj \
- $(TMPDIR)\tclCmdMZ.obj \
- $(TMPDIR)\tclCompCmds.obj \
- $(TMPDIR)\tclCompExpr.obj \
- $(TMPDIR)\tclCompile.obj \
- $(TMPDIR)\tclConfig.obj \
- $(TMPDIR)\tclDate.obj \
- $(TMPDIR)\tclDictObj.obj \
- $(TMPDIR)\tclEncoding.obj \
- $(TMPDIR)\tclEnv.obj \
- $(TMPDIR)\tclEvent.obj \
- $(TMPDIR)\tclExecute.obj \
- $(TMPDIR)\tclFCmd.obj \
- $(TMPDIR)\tclFileName.obj \
- $(TMPDIR)\tclGet.obj \
- $(TMPDIR)\tclHash.obj \
- $(TMPDIR)\tclHistory.obj \
- $(TMPDIR)\tclIndexObj.obj \
- $(TMPDIR)\tclInterp.obj \
- $(TMPDIR)\tclIO.obj \
- $(TMPDIR)\tclIOCmd.obj \
- $(TMPDIR)\tclIOGT.obj \
- $(TMPDIR)\tclIOSock.obj \
- $(TMPDIR)\tclIOUtil.obj \
- $(TMPDIR)\tclLink.obj \
- $(TMPDIR)\tclLiteral.obj \
- $(TMPDIR)\tclListObj.obj \
- $(TMPDIR)\tclLoad.obj \
- $(TMPDIR)\tclMain.obj \
- $(TMPDIR)\tclNamesp.obj \
- $(TMPDIR)\tclNotify.obj \
- $(TMPDIR)\tclObj.obj \
- $(TMPDIR)\tclPanic.obj \
- $(TMPDIR)\tclParse.obj \
- $(TMPDIR)\tclPipe.obj \
- $(TMPDIR)\tclPkg.obj \
- $(TMPDIR)\tclPkgConfig.obj \
- $(TMPDIR)\tclPosixStr.obj \
- $(TMPDIR)\tclPreserve.obj \
- $(TMPDIR)\tclProc.obj \
- $(TMPDIR)\tclRegexp.obj \
- $(TMPDIR)\tclResolve.obj \
- $(TMPDIR)\tclResult.obj \
- $(TMPDIR)\tclScan.obj \
- $(TMPDIR)\tclStringObj.obj \
- $(TMPDIR)\tclStubInit.obj \
- $(TMPDIR)\tclStubLib.obj \
- $(TMPDIR)\tclThread.obj \
- $(TMPDIR)\tclThreadJoin.obj \
- $(TMPDIR)\tclTimer.obj \
- $(TMPDIR)\tclTrace.obj \
- $(TMPDIR)\tclUtf.obj \
- $(TMPDIR)\tclUtil.obj \
- $(TMPDIR)\tclVar.obj \
- $(TMPDIR)\tclWin32Dll.obj \
- $(TMPDIR)\tclWinChan.obj \
- $(TMPDIR)\tclWinConsole.obj \
- $(TMPDIR)\tclWinSerial.obj \
- $(TMPDIR)\tclWinError.obj \
- $(TMPDIR)\tclWinFCmd.obj \
- $(TMPDIR)\tclWinFile.obj \
- $(TMPDIR)\tclWinInit.obj \
- $(TMPDIR)\tclWinLoad.obj \
- $(TMPDIR)\tclWinNotify.obj \
- $(TMPDIR)\tclWinPipe.obj \
- $(TMPDIR)\tclWinSock.obj \
- $(TMPDIR)\tclWinThrd.obj \
- $(TMPDIR)\tclWinTime.obj
-
-TCLSTUBOBJS = $(TMPDIR)\tclStubLib.obj
-
-WINDIR = $(ROOT)\win
-GENERICDIR = $(ROOT)\generic
-
-TCL_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)"
-TCL_DEFINES = $(DEBUGDEFINES) $(THREADDEFINES) $(SYMDEFINES) \
- $(PROFDEFINES) $(OPTDEFINES) $(SIXFOURDEFINES) \
- -DTCL_CFGVAL_ENCODING=${CFG_ENCODING}
-
-######################################################################
-# Compiler flags
-######################################################################
-
-!IF "$(NODEBUG)" == "1"
-# these macros cause maximum optimization and no symbols
-cdebug = -v- -vi- -O2 -D_DEBUG
-!ELSE
-# these macros enable debugging
-cdebug = -k -Od -r- -v -vi- -y
-!ENDIF
-
-SYSDEFINES = _MT;NO_STRICT;_NO_VCL
-
-# declarations common to all compiler options
-cbase = -c -q -3 -a4 -g0 -tWM -Ve -Vx -X-
-WARNINGS = -w-rch -w-pch -w-par -w-dup -w-pro -w-dpu
-
-ccons = -tWC
-
-INCLUDEPATH = $(include32) $(TCL_INCLUDES)
-
-CFLAGS = $(cdebug) $(cbase) $(INCLUDEPATH) $(WARNINGS) -D$(SYSDEFINES)
-TCL_CFLAGS = $(CFLAGS) $(TCL_DEFINES)
-CONS_CFLAGS = $(CFLAGS) $(TCL_DEFINES) $(ccons)
-
-######################################################################
-# Linker flags
-######################################################################
-
-!IF "$(NODEBUG)" == "1"
-ldebug =
-!ELSE
-ldebug = -v
-!ENDIF
-
-# declarations common to all linker options
-LNFLAGS = -D"" -Gn -I$(TMPDIR) -x $(ldebug) $(libpath32)
-# -Gi: create lib file (is -Gl in doc)
-# -aa: Windows app, -ap: Windows console app
-LNFLAGS_DLL = -ap -Gi -Tpd
-LNFLAGS_CONS = -ap -Tpe
-
-LNLIBS = import32 cw32mt
-
-
-######################################################################
-# Project specific targets
-######################################################################
-
-release: setup $(TCLSH) dlls
-dlls: setup $(TCLPIPEDLL) $(TCLREGDLL) $(TCLDDEDLL)
-all: setup $(TCLSH) dlls $(CAT32)
-tcltest: setup $(TCLTEST) dlls $(CAT32)
-plugin: setup $(TCLPLUGINDLL) $(TCLSHP)
-install: install-binaries install-libraries
-
-test: setup $(TCLTEST) dlls $(CAT32)
- set TCL_LIBRARY=$(ROOT)/library
- $(TCLTEST) $(ROOT)/tests/all.tcl
-
-setup:
- @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) &\
- echo *** Created directory '$(OUT_DIR)'
- @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) &\
- echo *** Created directory '$(TMP_DIR)'
-
-
-$(TCLLIB): $(TCLDLL)
-
-$(TCLDLL): $(TCLOBJS) $(TMPDIR)\$(NAMEPREFIX).res
- $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 @&&!
- $(TCLOBJS), $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res
-!
-
-$(TCLSTUBLIB): $(TCLSTUBOBJS)
- $(lib32) /u $@ $(TCLSTUBOBJS)
-
-$(TCLPLUGINLIB): $(TCLPLUGINDLL)
-
-$(TCLPLUGINDLL): $(TCLOBJS) $(TMPDIR)\tcl.res
- $(link32) $(ldebug) $(dlllflags) \
- -out:$@ $(TMPDIR)\tcl.res $(guilibsdll) @&&!
-$(TCLOBJS)
-!
-
-$(TCLSH): $(TCLSHOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res
- $(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!
- $(TCLSHOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res
-!
-
-$(TCLSHP): $(TCLSHOBJS) $(TCLPLUGINLIB) $(TMPDIR)\tclsh.res
- $(link32) $(ldebug) $(conlflags) $(TMPDIR)\tclsh.res -stack:2300000 \
- -out:$@ $(conlibsdll) $(TCLPLUGINLIB) $(TCLSHOBJS)
-
-$(TCLTEST): $(TCLTESTOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res
- $(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!
- $(TCLTESTOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res
-!
-
-$(TCLPIPEDLL): $(WINDIR)\stub16.c
- $(cc32) $(CFLAGS) -o$(TMPDIR)\stub16.obj $(WINDIR)\stub16.c
- $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \
- $(TMPDIR)\stub16.obj, $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res
-
-$(TCLDDEDLL): $(TMPDIR)\tclWinDde.obj $(TCLSTUBLIB)
- $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \
- $(TMPDIR)\tclWinDde.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \
- $(TMPDIR)\$(NAMEPREFIX).res
-
-$(TCLREGDLL): $(TMPDIR)\tclWinReg.obj $(TCLSTUBLIB)
- $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \
- $(TMPDIR)\tclWinReg.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \
- $(TMPDIR)\$(NAMEPREFIX).res
-
-$(CAT32): $(WINDIR)\cat.c
- $(cc32) $(CONS_CFLAGS) -o$(TMPDIR)\cat.obj $?
- $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \
- $(TMPDIR)\cat.obj, $@, -x, $(LNLIBS),,
-
-install-binaries: $(TCLSH)
- $(MKDIR) "$(BIN_INSTALL_DIR)"
- $(MKDIR) "$(LIB_INSTALL_DIR)"
- @echo Installing $(TCLDLLNAME)
- @copy "$(TCLDLL)" "$(BIN_INSTALL_DIR)"
- @copy "$(TCLLIB)" "$(LIB_INSTALL_DIR)"
- @echo Installing "$(TCLSH)"
- @copy "$(TCLSH)" "$(BIN_INSTALL_DIR)"
- @echo Installing $(TCLPIPEDLLNAME)
- @copy "$(TCLPIPEDLL)" "$(BIN_INSTALL_DIR)"
- @echo Installing $(TCLSTUBLIBNAME)
- @copy "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)"
-
-install-libraries:
- -@$(MKDIR) "$(LIB_INSTALL_DIR)"
- -@$(MKDIR) "$(INCLUDE_INSTALL_DIR)"
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)"
- @echo Installing http1.0
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http1.0"
- -@copy "$(ROOT)\library\http1.0\http.tcl" "$(SCRIPT_INSTALL_DIR)\http1.0"
- -@copy "$(ROOT)\library\http1.0\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http1.0"
- @echo Installing http2.7
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http2.7"
- -@copy "$(ROOT)\library\http\http.tcl" "$(SCRIPT_INSTALL_DIR)\http2.7"
- -@copy "$(ROOT)\library\http\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http2.7"
- @echo Installing opt0.4
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\opt0.4"
- -@copy "$(ROOT)\library\opt\optparse.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
- -@copy "$(ROOT)\library\opt\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
- @echo Installing msgcat1.5
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
- -@copy "$(ROOT)\library\msgcat\msgcat.tcl" "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
- -@copy "$(ROOT)\library\msgcat\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
- @echo Installing tcltest2.3
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
- -@copy "$(ROOT)\library\tcltest\tcltest.tcl" "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
- -@copy "$(ROOT)\library\tcltest\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
- @echo Installing platform1.0
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\platform1.0"
- -@copy "$(ROOT)\library\platform\platform.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
- -@copy "$(ROOT)\library\platform\shell.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
- -@copy "$(ROOT)\library\platform\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
- @echo Installing $(TCLDDEDLLNAME)
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\dde1.3"
- -@copy "$(TCLDDEDLL)" "$(SCRIPT_INSTALL_DIR)\dde1.3"
- -@copy "$(ROOT)\library\dde\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\dde1.3"
- @echo Installing $(TCLREGDLLNAME)
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\reg1.2"
- -@copy "$(TCLREGDLL)" "$(SCRIPT_INSTALL_DIR)\reg1.2"
- -@copy "$(ROOT)\library\reg\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\reg1.2"
- @echo Installing encoding files
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\encoding"
- -@copy "$(ROOT)\library\encoding\*.enc" "$(SCRIPT_INSTALL_DIR)\encoding"
- @echo Installing library files
- -@copy "$(GENERICDIR)\tcl.h" "$(INCLUDE_INSTALL_DIR)"
- -@copy "$(GENERICDIR)\tclDecls.h" "$(INCLUDE_INSTALL_DIR)"
- -@copy "$(GENERICDIR)\tclPlatDecls.h" "$(INCLUDE_INSTALL_DIR)"
- -@copy "$(ROOT)\library\history.tcl" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\init.tcl" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\parray.tcl" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\safe.tcl" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\tclIndex" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\package.tcl" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\word.tcl" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\auto.tcl" "$(SCRIPT_INSTALL_DIR)"
-
-#
-# Regenerate the stubs files.
-#
-
-genstubs:
- tclsh$(VERSION) $(ROOT)\tools\genStubs.tcl $(GENERICDIR) \
- $(GENERICDIR)\tcl.decls $(GENERICDIR)\tclInt.decls
-
-#
-# Regenerate the windows help files.
-#
-
-TCLTOOLS = $(ROOT)/tools
-MAN2TCL = $(TCLTOOLS)/man2tcl
-TCLRTF = $(TCLTOOLS)/tcl.rtf
-TCLHPJ = $(TCLTOOLS)/tcl.hpj
-MAN2HELP = $(TCLTOOLS)/man2help.tcl
-HCRTF = $(TOOLS32)/bin/hcrtf.exe
-
-winhelp: $(TCLRTF)
- cd $(TCLTOOLS)
- start /wait $(HCRTF) -xn $(TCLHPJ)
-
-$(MAN2TCL).exe: $(MAN2TCL).obj
- cd $(TCLTOOLS)
- $(cc32) /nologo /G4 /ML /O2 $(MAN2TCL).c
-
-$(TCLRTF): $(MAN2TCL).exe $(TCLSH)
- cd $(TCLTOOLS)
- ..\win\$(TCLSH) $(MAN2HELP) $(NAMEPREFIX) $(VERSION) $(ROOT)/doc ../../tk$(DOTVERSION)/doc
-
-#
-# Special case object file targets
-#
-$(TMPDIR)\tclWinInit.obj: $(WINDIR)\tclWinInit.c
- $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\testMain.obj: $(WINDIR)\tclAppInit.c
- $(cc32) $(TCL_CFLAGS) -DTCL_TEST -o$(TMPDIR)\testMain.obj $?
-
-$(TMPDIR)\tclTest.obj: $(GENERICDIR)\tclTest.c
- $(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c
- $(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\tclWinTest.obj: $(WINDIR)\tclWinTest.c
- $(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-$(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c
- $(cc32) $(TCL_CFLAGS) \
- -DCFG_INSTALL_EXEC_PREFIX=\"$(INSTALL_EXEC_PREFIX)\" \
- -DCFG_INSTALL_PREFIX=\"$(INSTALL_PREFIX)\" \
- -DCFG_RUNTIME_EXEC_PREFIX=\"$(RUNTIME_EXEC_PREFIX)\" \
- -DCFG_RUNTIME_PREFIX=\"$(RUNTIME_PREFIX)\" \
- -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\tclAppInit.obj : $(WINDIR)\tclAppInit.c
- $(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-# The following objects should be built using the stub interfaces
-
-# tclWinReg: Produces errors in ANSI mode
-$(TMPDIR)\tclWinReg.obj : $(WINDIR)\tclWinReg.c
- $(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?
-
-# tclWinDde: Produces errors in ANSI mode
-$(TMPDIR)\tclWinDde.obj : $(WINDIR)\tclWinDde.c
- $(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?
-
-
-# The following objects are part of the stub library and should not
-# be built as DLL objects but none of the symbols should be exported
-
-$(TMPDIR)\tclStubLib.obj : $(GENERICDIR)\tclStubLib.c
- $(cc32) $(TCL_CFLAGS) -DSTATIC_BUILD -o$(TMPDIR)\$@ $?
-
-
-# Dedependency rules
-
-$(GENERICDIR)\regcomp.c: \
- $(GENERICDIR)\regguts.h \
- $(GENERICDIR)\regc_lex.c \
- $(GENERICDIR)\regc_color.c \
- $(GENERICDIR)\regc_nfa.c \
- $(GENERICDIR)\regc_cvec.c \
- $(GENERICDIR)\regc_locale.c
-
-$(GENERICDIR)\regcustom.h: \
- $(GENERICDIR)\tclInt.h \
- $(GENERICDIR)\tclPort.h \
- $(GENERICDIR)\regex.h
-
-$(GENERICDIR)\regexec.c: \
- $(GENERICDIR)\rege_dfa.c \
- $(GENERICDIR)\regguts.h
-
-$(GENERICDIR)\regerror.c: $(GENERICDIR)\regguts.h
-$(GENERICDIR)\regfree.c: $(GENERICDIR)\regguts.h
-$(GENERICDIR)\regfronts.c: $(GENERICDIR)\regguts.h
-$(GENERICDIR)\regguts.h: $(GENERICDIR)\regcustom.h
-
-#
-# Implicit rules
-#
-
-{$(WINDIR)}.c{$(TMPDIR)}.obj:
- $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
-
-{$(GENERICDIR)}.c{$(TMPDIR)}.obj:
- $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
-
-{$(ROOT)\compat}.c{$(TMPDIR)}.obj:
- $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
-
-{$(WINDIR)}.rc{$(TMPDIR)}.res:
- $(rc32) $(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
-
-clean:
- -@$(RM) $(OUTDIR)\*.exp
- -@$(RM) $(OUTDIR)\*.lib
- -@$(RM) $(OUTDIR)\*.dll
- -@$(RM) $(OUTDIR)\*.exe
- -@$(RM) $(OUTDIR)\*.pdb
- -@$(RM) $(TMPDIR)\*.pch
- -@$(RM) $(TMPDIR)\*.obj
- -@$(RM) $(TMPDIR)\*.res
- -@$(RM) $(TMPDIR)\*.exe
- -@$(RMDIR) $(OUTDIR)
- -@$(RMDIR) $(TMPDIR)
+#
+# Makefile for Borland C++ 5.5 (or C++ Builder 5), adapted from the makefile
+# for Visual C++ that came with tcl 8.3.3
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 1995-1996 Sun Microsystems, Inc.
+# Copyright (c) 1998-1999 by Scriptics Corporation.
+
+# TIP #59 information.
+#
+# This makefile does not set the following configuration cpp
+# defines. Behind the defines are the makefile variables listed to set
+# to -D... when that feature is enabled.
+#
+# - TCL_CFG_PROFILED PROFDEFINES
+# - TCL_CFG_OPTIMIZED OPTDEFINES
+# - TCL_CFG_DO64BIT SIXFOURDEFINES
+
+# Have a look at the complete description on how to build and test Tcl with
+# the current Borland compilers at www.ratiosoft.com/tcl/borland.
+#
+# Usage:
+# - Adapt the paths below to match your compiler's location
+# - Make sure the compiler's bin directory is on your path
+# - Open a console
+# - To make a debug version enter
+# make -fmakefile.bc -DNODEBUG=0 xxx
+# where 'xxx' is the target you want (e.g. 'all', 'test', ...)
+# Please note: I omitted the 'd' suffix for debug versions because Tcl
+# will always call tclpip83.dll and not tclpip83d.dll, causing an error.
+# ^
+# Besides, the debug version goes into a separate directory, so there
+# should be no problem having DLLs and EXEs with the same name.
+# If you prefer your debug version having the 'd' suffix just uncomment
+# the line
+# #DBGX = d
+#
+# - To make a 'normal' version enter
+# make -fmakefile.bc xxx
+# where 'xxx' is the target you want (e.g. 'all', 'test', ...)
+#
+# DISCLAIMER:
+# This makefile has an experimental status - that is those targets which
+# have been modified do in fact compile and link with Borland's C++
+# Builder 5 and with the free Borland compiler (Borland C++ 5.5).
+# However the author assumes no responsiblity for any effect which the use of
+# this makefile or of the resulting programs might have on your system.
+#
+# Not yet modified:
+# - The 'plug-in-DLL' and the associated shell.
+# - The programs to create the windows help files.
+#
+# Suggestions and / or improvements are always welcome.
+#
+# May 2001, H. Giese (hgiese@ratiosoft.com)
+#
+
+# Does not depend on the presence of any environment variables in
+# order to compile tcl; all needed information is derived from
+# location of the compiler directories.
+
+#
+# Project directories
+#
+# ROOT = top of source tree
+#
+# TOOLS32 = location of Borland development tools.
+#
+# INSTALLDIR = where the install-targets should copy the binaries and
+# support files
+#
+
+ROOT = ..
+INSTALLDIR = c:\program files\tcl
+
+# If you have C++ Builder 5 or the free Borland C++ 5.5 compiler
+# adapt the following paths as appropriate for your system
+TOOLS32 = c:\dev\bcc55
+TOOLS32_rc = c:\dev\bcc55
+#TOOLS32 = c:\bc55
+#TOOLS32_rc = c:\bc55
+
+cc32 = "$(TOOLS32)\bin\bcc32.exe"
+link32 = "$(TOOLS32)\bin\ilink32.exe"
+lib32 = "$(TOOLS32)\bin\tlib.exe"
+rc32 = "$(TOOLS32_rc)\bin\brcc32.exe"
+include32 = -I"$(TOOLS32)\include"
+libpath32 = -L"$(TOOLS32)\lib"
+
+# Uncomment the following line to compile with thread support
+#THREADDEFINES = -DTCL_THREADS=1
+
+# Allow definition of NDEBUG via command line
+# Set NODEBUG to 0 to compile with symbols
+!if !defined(NODEBUG)
+NODEBUG = 1
+!endif
+
+# CFG_ENCODING=encoding
+# name of encoding for configuration information. Defaults
+# to cp1252
+!if !defined(CFG_ENCODING)
+CFG_ENCODING = \"cp1252\"
+!endif
+
+# The following defines can be used to control the amount of debugging
+# code that is added to the compilation.
+#
+# -DTCL_MEM_DEBUG Enables the debugging memory allocator.
+# -DTCL_COMPILE_DEBUG Enables byte compilation logging.
+# -DTCL_COMPILE_STATS Enables byte compilation statistics gathering.
+# -DUSE_TCLALLOC=0 Disables the Tcl memory allocator in favor
+# of the native malloc implementation. This is
+# needed when using Purify.
+#
+#DEBUGDEFINES = -DTCL_MEM_DEBUG -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
+#DEBUGDEFINES = -DUSE_TCLALLOC=0
+
+######################################################################
+# Do not modify below this line
+######################################################################
+
+NAMEPREFIX = tcl
+STUBPREFIX = $(NAMEPREFIX)stub
+DOTVERSION = 8.5
+VERSION = 85
+
+DDEVERSION = 13
+DDEDOTVERSION = 1.3
+
+REGVERSION = 12
+REGDOTVERSION = 1.2
+
+BINROOT = ..
+!IF "$(NODEBUG)" == "1"
+TMPDIRNAME = Release
+DBGX =
+SYMDEFINES = -DNDEBUG
+!ELSE
+TMPDIRNAME = Debug
+#DBGX = d
+DBGX =
+SYMDEFINES = -DTCL_CFG_DEBUG
+!ENDIF
+TMPDIR = $(BINROOT)\$(TMPDIRNAME)
+OUTDIRNAME = $(TMPDIRNAME)
+OUTDIR = $(TMPDIR)
+
+TCLLIB = $(OUTDIR)\$(NAMEPREFIX)$(VERSION)$(DBGX).lib
+TCLDLLNAME = $(NAMEPREFIX)$(VERSION)$(DBGX).dll
+TCLDLL = $(OUTDIR)\$(TCLDLLNAME)
+
+TCLSTUBLIBNAME = $(STUBPREFIX)$(VERSION)$(DBGX).lib
+TCLSTUBLIB = $(OUTDIR)\$(TCLSTUBLIBNAME)
+
+TCLPLUGINLIB = $(OUTDIR)\$(NAMEPREFIX)$(VERSION)p$(DBGX).lib
+TCLPLUGINDLLNAME = $(NAMEPREFIX)$(VERSION)p$(DBGX).dll
+TCLPLUGINDLL = $(OUTDIR)\$(TCLPLUGINDLLNAME)
+TCLSH = $(OUTDIR)\$(NAMEPREFIX)sh$(VERSION)$(DBGX).exe
+TCLSHP = $(OUTDIR)\$(NAMEPREFIX)shp$(VERSION)$(DBGX).exe
+TCLPIPEDLLNAME = $(NAMEPREFIX)pip$(VERSION)$(DBGX).dll
+TCLPIPEDLL = $(OUTDIR)\$(TCLPIPEDLLNAME)
+TCLREGDLLNAME = $(NAMEPREFIX)reg$(REGVERSION)$(DBGX).dll
+TCLREGDLL = $(OUTDIR)\$(TCLREGDLLNAME)
+TCLDDEDLLNAME = $(NAMEPREFIX)dde$(DDEVERSION)$(DBGX).dll
+TCLDDEDLL = $(OUTDIR)\$(TCLDDEDLLNAME)
+TCLTEST = $(OUTDIR)\$(NAMEPREFIX)test.exe
+CAT32 = $(TMPDIR)\cat32.exe
+RMDIR = .\rmd.bat
+MKDIR = .\mkd.bat
+RM = del
+
+LIB_INSTALL_DIR = $(INSTALLDIR)\lib
+BIN_INSTALL_DIR = $(INSTALLDIR)\bin
+SCRIPT_INSTALL_DIR = $(INSTALLDIR)\lib\tcl$(DOTVERSION)
+INCLUDE_INSTALL_DIR = $(INSTALLDIR)\include
+
+TCLSHOBJS = \
+ $(TMPDIR)\tclAppInit.obj
+
+TCLTESTOBJS = \
+ $(TMPDIR)\tclTest.obj \
+ $(TMPDIR)\tclTestObj.obj \
+ $(TMPDIR)\tclTestProcBodyObj.obj \
+ $(TMPDIR)\tclThreadTest.obj \
+ $(TMPDIR)\tclWinTest.obj \
+ $(TMPDIR)\testMain.obj
+
+TCLOBJS = \
+ $(TMPDIR)\regcomp.obj \
+ $(TMPDIR)\regexec.obj \
+ $(TMPDIR)\regfree.obj \
+ $(TMPDIR)\regerror.obj \
+ $(TMPDIR)\tclAlloc.obj \
+ $(TMPDIR)\tclAsync.obj \
+ $(TMPDIR)\tclBasic.obj \
+ $(TMPDIR)\tclBinary.obj \
+ $(TMPDIR)\tclCkalloc.obj \
+ $(TMPDIR)\tclClock.obj \
+ $(TMPDIR)\tclCmdAH.obj \
+ $(TMPDIR)\tclCmdIL.obj \
+ $(TMPDIR)\tclCmdMZ.obj \
+ $(TMPDIR)\tclCompCmds.obj \
+ $(TMPDIR)\tclCompExpr.obj \
+ $(TMPDIR)\tclCompile.obj \
+ $(TMPDIR)\tclConfig.obj \
+ $(TMPDIR)\tclDate.obj \
+ $(TMPDIR)\tclDictObj.obj \
+ $(TMPDIR)\tclEncoding.obj \
+ $(TMPDIR)\tclEnv.obj \
+ $(TMPDIR)\tclEvent.obj \
+ $(TMPDIR)\tclExecute.obj \
+ $(TMPDIR)\tclFCmd.obj \
+ $(TMPDIR)\tclFileName.obj \
+ $(TMPDIR)\tclGet.obj \
+ $(TMPDIR)\tclHash.obj \
+ $(TMPDIR)\tclHistory.obj \
+ $(TMPDIR)\tclIndexObj.obj \
+ $(TMPDIR)\tclInterp.obj \
+ $(TMPDIR)\tclIO.obj \
+ $(TMPDIR)\tclIOCmd.obj \
+ $(TMPDIR)\tclIOGT.obj \
+ $(TMPDIR)\tclIOSock.obj \
+ $(TMPDIR)\tclIOUtil.obj \
+ $(TMPDIR)\tclLink.obj \
+ $(TMPDIR)\tclLiteral.obj \
+ $(TMPDIR)\tclListObj.obj \
+ $(TMPDIR)\tclLoad.obj \
+ $(TMPDIR)\tclMain.obj \
+ $(TMPDIR)\tclNamesp.obj \
+ $(TMPDIR)\tclNotify.obj \
+ $(TMPDIR)\tclObj.obj \
+ $(TMPDIR)\tclPanic.obj \
+ $(TMPDIR)\tclParse.obj \
+ $(TMPDIR)\tclPipe.obj \
+ $(TMPDIR)\tclPkg.obj \
+ $(TMPDIR)\tclPkgConfig.obj \
+ $(TMPDIR)\tclPosixStr.obj \
+ $(TMPDIR)\tclPreserve.obj \
+ $(TMPDIR)\tclProc.obj \
+ $(TMPDIR)\tclRegexp.obj \
+ $(TMPDIR)\tclResolve.obj \
+ $(TMPDIR)\tclResult.obj \
+ $(TMPDIR)\tclScan.obj \
+ $(TMPDIR)\tclStringObj.obj \
+ $(TMPDIR)\tclStubInit.obj \
+ $(TMPDIR)\tclStubLib.obj \
+ $(TMPDIR)\tclThread.obj \
+ $(TMPDIR)\tclThreadJoin.obj \
+ $(TMPDIR)\tclTimer.obj \
+ $(TMPDIR)\tclTrace.obj \
+ $(TMPDIR)\tclUtf.obj \
+ $(TMPDIR)\tclUtil.obj \
+ $(TMPDIR)\tclVar.obj \
+ $(TMPDIR)\tclWin32Dll.obj \
+ $(TMPDIR)\tclWinChan.obj \
+ $(TMPDIR)\tclWinConsole.obj \
+ $(TMPDIR)\tclWinSerial.obj \
+ $(TMPDIR)\tclWinError.obj \
+ $(TMPDIR)\tclWinFCmd.obj \
+ $(TMPDIR)\tclWinFile.obj \
+ $(TMPDIR)\tclWinInit.obj \
+ $(TMPDIR)\tclWinLoad.obj \
+ $(TMPDIR)\tclWinNotify.obj \
+ $(TMPDIR)\tclWinPipe.obj \
+ $(TMPDIR)\tclWinSock.obj \
+ $(TMPDIR)\tclWinThrd.obj \
+ $(TMPDIR)\tclWinTime.obj
+
+TCLSTUBOBJS = $(TMPDIR)\tclStubLib.obj
+
+WINDIR = $(ROOT)\win
+GENERICDIR = $(ROOT)\generic
+
+TCL_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)"
+TCL_DEFINES = $(DEBUGDEFINES) $(THREADDEFINES) $(SYMDEFINES) \
+ $(PROFDEFINES) $(OPTDEFINES) $(SIXFOURDEFINES) \
+ -DTCL_CFGVAL_ENCODING=${CFG_ENCODING}
+
+######################################################################
+# Compiler flags
+######################################################################
+
+!IF "$(NODEBUG)" == "1"
+# these macros cause maximum optimization and no symbols
+cdebug = -v- -vi- -O2 -D_DEBUG
+!ELSE
+# these macros enable debugging
+cdebug = -k -Od -r- -v -vi- -y
+!ENDIF
+
+SYSDEFINES = _MT;NO_STRICT;_NO_VCL
+
+# declarations common to all compiler options
+cbase = -c -q -3 -a4 -g0 -tWM -Ve -Vx -X-
+WARNINGS = -w-rch -w-pch -w-par -w-dup -w-pro -w-dpu
+
+ccons = -tWC
+
+INCLUDEPATH = $(include32) $(TCL_INCLUDES)
+
+CFLAGS = $(cdebug) $(cbase) $(INCLUDEPATH) $(WARNINGS) -D$(SYSDEFINES)
+TCL_CFLAGS = $(CFLAGS) $(TCL_DEFINES)
+CONS_CFLAGS = $(CFLAGS) $(TCL_DEFINES) $(ccons)
+
+######################################################################
+# Linker flags
+######################################################################
+
+!IF "$(NODEBUG)" == "1"
+ldebug =
+!ELSE
+ldebug = -v
+!ENDIF
+
+# declarations common to all linker options
+LNFLAGS = -D"" -Gn -I$(TMPDIR) -x $(ldebug) $(libpath32)
+# -Gi: create lib file (is -Gl in doc)
+# -aa: Windows app, -ap: Windows console app
+LNFLAGS_DLL = -ap -Gi -Tpd
+LNFLAGS_CONS = -ap -Tpe
+
+LNLIBS = import32 cw32mt
+
+
+######################################################################
+# Project specific targets
+######################################################################
+
+release: setup $(TCLSH) dlls
+dlls: setup $(TCLPIPEDLL) $(TCLREGDLL) $(TCLDDEDLL)
+all: setup $(TCLSH) dlls $(CAT32)
+tcltest: setup $(TCLTEST) dlls $(CAT32)
+plugin: setup $(TCLPLUGINDLL) $(TCLSHP)
+install: install-binaries install-libraries
+
+test: setup $(TCLTEST) dlls $(CAT32)
+ set TCL_LIBRARY=$(ROOT)/library
+ $(TCLTEST) $(ROOT)/tests/all.tcl
+
+setup:
+ @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) &\
+ echo *** Created directory '$(OUT_DIR)'
+ @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) &\
+ echo *** Created directory '$(TMP_DIR)'
+
+
+$(TCLLIB): $(TCLDLL)
+
+$(TCLDLL): $(TCLOBJS) $(TMPDIR)\$(NAMEPREFIX).res
+ $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 @&&!
+ $(TCLOBJS), $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res
+!
+
+$(TCLSTUBLIB): $(TCLSTUBOBJS)
+ $(lib32) /u $@ $(TCLSTUBOBJS)
+
+$(TCLPLUGINLIB): $(TCLPLUGINDLL)
+
+$(TCLPLUGINDLL): $(TCLOBJS) $(TMPDIR)\tcl.res
+ $(link32) $(ldebug) $(dlllflags) \
+ -out:$@ $(TMPDIR)\tcl.res $(guilibsdll) @&&!
+$(TCLOBJS)
+!
+
+$(TCLSH): $(TCLSHOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res
+ $(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!
+ $(TCLSHOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res
+!
+
+$(TCLSHP): $(TCLSHOBJS) $(TCLPLUGINLIB) $(TMPDIR)\tclsh.res
+ $(link32) $(ldebug) $(conlflags) $(TMPDIR)\tclsh.res -stack:2300000 \
+ -out:$@ $(conlibsdll) $(TCLPLUGINLIB) $(TCLSHOBJS)
+
+$(TCLTEST): $(TCLTESTOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res
+ $(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!
+ $(TCLTESTOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res
+!
+
+$(TCLPIPEDLL): $(WINDIR)\stub16.c
+ $(cc32) $(CFLAGS) -o$(TMPDIR)\stub16.obj $(WINDIR)\stub16.c
+ $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \
+ $(TMPDIR)\stub16.obj, $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res
+
+$(TCLDDEDLL): $(TMPDIR)\tclWinDde.obj $(TCLSTUBLIB)
+ $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \
+ $(TMPDIR)\tclWinDde.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \
+ $(TMPDIR)\$(NAMEPREFIX).res
+
+$(TCLREGDLL): $(TMPDIR)\tclWinReg.obj $(TCLSTUBLIB)
+ $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \
+ $(TMPDIR)\tclWinReg.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \
+ $(TMPDIR)\$(NAMEPREFIX).res
+
+$(CAT32): $(WINDIR)\cat.c
+ $(cc32) $(CONS_CFLAGS) -o$(TMPDIR)\cat.obj $?
+ $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \
+ $(TMPDIR)\cat.obj, $@, -x, $(LNLIBS),,
+
+install-binaries: $(TCLSH)
+ $(MKDIR) "$(BIN_INSTALL_DIR)"
+ $(MKDIR) "$(LIB_INSTALL_DIR)"
+ @echo Installing $(TCLDLLNAME)
+ @copy "$(TCLDLL)" "$(BIN_INSTALL_DIR)"
+ @copy "$(TCLLIB)" "$(LIB_INSTALL_DIR)"
+ @echo Installing "$(TCLSH)"
+ @copy "$(TCLSH)" "$(BIN_INSTALL_DIR)"
+ @echo Installing $(TCLPIPEDLLNAME)
+ @copy "$(TCLPIPEDLL)" "$(BIN_INSTALL_DIR)"
+ @echo Installing $(TCLSTUBLIBNAME)
+ @copy "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)"
+
+install-libraries:
+ -@$(MKDIR) "$(LIB_INSTALL_DIR)"
+ -@$(MKDIR) "$(INCLUDE_INSTALL_DIR)"
+ -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)"
+ @echo Installing http1.0
+ -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http1.0"
+ -@copy "$(ROOT)\library\http1.0\http.tcl" "$(SCRIPT_INSTALL_DIR)\http1.0"
+ -@copy "$(ROOT)\library\http1.0\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http1.0"
+ @echo Installing http2.7
+ -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http2.7"
+ -@copy "$(ROOT)\library\http\http.tcl" "$(SCRIPT_INSTALL_DIR)\http2.7"
+ -@copy "$(ROOT)\library\http\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http2.7"
+ @echo Installing opt0.4
+ -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\opt0.4"
+ -@copy "$(ROOT)\library\opt\optparse.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
+ -@copy "$(ROOT)\library\opt\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
+ @echo Installing msgcat1.5
+ -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
+ -@copy "$(ROOT)\library\msgcat\msgcat.tcl" "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
+ -@copy "$(ROOT)\library\msgcat\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
+ @echo Installing tcltest2.3
+ -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
+ -@copy "$(ROOT)\library\tcltest\tcltest.tcl" "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
+ -@copy "$(ROOT)\library\tcltest\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
+ @echo Installing platform1.0
+ -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\platform1.0"
+ -@copy "$(ROOT)\library\platform\platform.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
+ -@copy "$(ROOT)\library\platform\shell.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
+ -@copy "$(ROOT)\library\platform\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
+ @echo Installing $(TCLDDEDLLNAME)
+ -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\dde1.3"
+ -@copy "$(TCLDDEDLL)" "$(SCRIPT_INSTALL_DIR)\dde1.3"
+ -@copy "$(ROOT)\library\dde\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\dde1.3"
+ @echo Installing $(TCLREGDLLNAME)
+ -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\reg1.2"
+ -@copy "$(TCLREGDLL)" "$(SCRIPT_INSTALL_DIR)\reg1.2"
+ -@copy "$(ROOT)\library\reg\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\reg1.2"
+ @echo Installing encoding files
+ -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\encoding"
+ -@copy "$(ROOT)\library\encoding\*.enc" "$(SCRIPT_INSTALL_DIR)\encoding"
+ @echo Installing library files
+ -@copy "$(GENERICDIR)\tcl.h" "$(INCLUDE_INSTALL_DIR)"
+ -@copy "$(GENERICDIR)\tclDecls.h" "$(INCLUDE_INSTALL_DIR)"
+ -@copy "$(GENERICDIR)\tclPlatDecls.h" "$(INCLUDE_INSTALL_DIR)"
+ -@copy "$(ROOT)\library\history.tcl" "$(SCRIPT_INSTALL_DIR)"
+ -@copy "$(ROOT)\library\init.tcl" "$(SCRIPT_INSTALL_DIR)"
+ -@copy "$(ROOT)\library\parray.tcl" "$(SCRIPT_INSTALL_DIR)"
+ -@copy "$(ROOT)\library\safe.tcl" "$(SCRIPT_INSTALL_DIR)"
+ -@copy "$(ROOT)\library\tclIndex" "$(SCRIPT_INSTALL_DIR)"
+ -@copy "$(ROOT)\library\package.tcl" "$(SCRIPT_INSTALL_DIR)"
+ -@copy "$(ROOT)\library\word.tcl" "$(SCRIPT_INSTALL_DIR)"
+ -@copy "$(ROOT)\library\auto.tcl" "$(SCRIPT_INSTALL_DIR)"
+
+#
+# Regenerate the stubs files.
+#
+
+genstubs:
+ tclsh$(VERSION) $(ROOT)\tools\genStubs.tcl $(GENERICDIR) \
+ $(GENERICDIR)\tcl.decls $(GENERICDIR)\tclInt.decls
+
+#
+# Regenerate the windows help files.
+#
+
+TCLTOOLS = $(ROOT)/tools
+MAN2TCL = $(TCLTOOLS)/man2tcl
+TCLRTF = $(TCLTOOLS)/tcl.rtf
+TCLHPJ = $(TCLTOOLS)/tcl.hpj
+MAN2HELP = $(TCLTOOLS)/man2help.tcl
+HCRTF = $(TOOLS32)/bin/hcrtf.exe
+
+winhelp: $(TCLRTF)
+ cd $(TCLTOOLS)
+ start /wait $(HCRTF) -xn $(TCLHPJ)
+
+$(MAN2TCL).exe: $(MAN2TCL).obj
+ cd $(TCLTOOLS)
+ $(cc32) /nologo /G4 /ML /O2 $(MAN2TCL).c
+
+$(TCLRTF): $(MAN2TCL).exe $(TCLSH)
+ cd $(TCLTOOLS)
+ ..\win\$(TCLSH) $(MAN2HELP) $(NAMEPREFIX) $(VERSION) $(ROOT)/doc ../../tk$(DOTVERSION)/doc
+
+#
+# Special case object file targets
+#
+$(TMPDIR)\tclWinInit.obj: $(WINDIR)\tclWinInit.c
+ $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
+
+$(TMPDIR)\testMain.obj: $(WINDIR)\tclAppInit.c
+ $(cc32) $(TCL_CFLAGS) -DTCL_TEST -o$(TMPDIR)\testMain.obj $?
+
+$(TMPDIR)\tclTest.obj: $(GENERICDIR)\tclTest.c
+ $(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
+
+$(TMPDIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c
+ $(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
+
+$(TMPDIR)\tclWinTest.obj: $(WINDIR)\tclWinTest.c
+ $(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
+
+$(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c
+ $(cc32) $(TCL_CFLAGS) \
+ -DCFG_INSTALL_EXEC_PREFIX=\"$(INSTALL_EXEC_PREFIX)\" \
+ -DCFG_INSTALL_PREFIX=\"$(INSTALL_PREFIX)\" \
+ -DCFG_RUNTIME_EXEC_PREFIX=\"$(RUNTIME_EXEC_PREFIX)\" \
+ -DCFG_RUNTIME_PREFIX=\"$(RUNTIME_PREFIX)\" \
+ -o$(TMPDIR)\$@ $?
+
+$(TMPDIR)\tclAppInit.obj : $(WINDIR)\tclAppInit.c
+ $(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
+
+# The following objects should be built using the stub interfaces
+
+# tclWinReg: Produces errors in ANSI mode
+$(TMPDIR)\tclWinReg.obj : $(WINDIR)\tclWinReg.c
+ $(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?
+
+# tclWinDde: Produces errors in ANSI mode
+$(TMPDIR)\tclWinDde.obj : $(WINDIR)\tclWinDde.c
+ $(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?
+
+
+# The following objects are part of the stub library and should not
+# be built as DLL objects but none of the symbols should be exported
+
+$(TMPDIR)\tclStubLib.obj : $(GENERICDIR)\tclStubLib.c
+ $(cc32) $(TCL_CFLAGS) -DSTATIC_BUILD -o$(TMPDIR)\$@ $?
+
+
+# Dedependency rules
+
+$(GENERICDIR)\regcomp.c: \
+ $(GENERICDIR)\regguts.h \
+ $(GENERICDIR)\regc_lex.c \
+ $(GENERICDIR)\regc_color.c \
+ $(GENERICDIR)\regc_nfa.c \
+ $(GENERICDIR)\regc_cvec.c \
+ $(GENERICDIR)\regc_locale.c
+
+$(GENERICDIR)\regcustom.h: \
+ $(GENERICDIR)\tclInt.h \
+ $(GENERICDIR)\tclPort.h \
+ $(GENERICDIR)\regex.h
+
+$(GENERICDIR)\regexec.c: \
+ $(GENERICDIR)\rege_dfa.c \
+ $(GENERICDIR)\regguts.h
+
+$(GENERICDIR)\regerror.c: $(GENERICDIR)\regguts.h
+$(GENERICDIR)\regfree.c: $(GENERICDIR)\regguts.h
+$(GENERICDIR)\regfronts.c: $(GENERICDIR)\regguts.h
+$(GENERICDIR)\regguts.h: $(GENERICDIR)\regcustom.h
+
+#
+# Implicit rules
+#
+
+{$(WINDIR)}.c{$(TMPDIR)}.obj:
+ $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
+
+{$(GENERICDIR)}.c{$(TMPDIR)}.obj:
+ $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
+
+{$(ROOT)\compat}.c{$(TMPDIR)}.obj:
+ $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
+
+{$(WINDIR)}.rc{$(TMPDIR)}.res:
+ $(rc32) $(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+
+clean:
+ -@$(RM) $(OUTDIR)\*.exp
+ -@$(RM) $(OUTDIR)\*.lib
+ -@$(RM) $(OUTDIR)\*.dll
+ -@$(RM) $(OUTDIR)\*.exe
+ -@$(RM) $(OUTDIR)\*.pdb
+ -@$(RM) $(TMPDIR)\*.pch
+ -@$(RM) $(TMPDIR)\*.obj
+ -@$(RM) $(TMPDIR)\*.res
+ -@$(RM) $(TMPDIR)\*.exe
+ -@$(RMDIR) $(OUTDIR)
+ -@$(RMDIR) $(TMPDIR)
generated by cgit v0.12 at 2024-11-05 16:05:41 (GMT)