summaryrefslogtreecommitdiffstats
path: root/win/makefile.bc
diff options
context:
space:
mode:
Diffstat (limited to 'win/makefile.bc')
-rw-r--r--win/makefile.bc594
1 files changed, 0 insertions, 594 deletions
diff --git a/win/makefile.bc b/win/makefile.bc
deleted file mode 100644
index f5b5acc..0000000
--- a/win/makefile.bc
+++ /dev/null
@@ -1,594 +0,0 @@
-#
-# Makefile for Borland C++ 5.5 (or C++ Builder 5), adapted from the makefile
-# for Visual C++ that came with tcl 8.3.3
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-#
-# Copyright (c) 1995-1996 Sun Microsystems, Inc.
-# Copyright (c) 1998-1999 by Scriptics Corporation.
-
-# TIP #59 information.
-#
-# This makefile does not set the following configuration cpp
-# defines. Behind the defines are the makefile variables listed to set
-# to -D... when that feature is enabled.
-#
-# - TCL_CFG_PROFILED PROFDEFINES
-# - TCL_CFG_OPTIMIZED OPTDEFINES
-# - TCL_CFG_DO64BIT SIXFOURDEFINES
-
-# Have a look at the complete description on how to build and test Tcl with
-# the current Borland compilers at www.ratiosoft.com/tcl/borland.
-#
-# Usage:
-# - Adapt the paths below to match your compiler's location
-# - Make sure the compiler's bin directory is on your path
-# - Open a console
-# - To make a debug version enter
-# make -fmakefile.bc -DNODEBUG=0 xxx
-# where 'xxx' is the target you want (e.g. 'all', 'test', ...)
-# Please note: I omitted the 'd' suffix for debug versions because Tcl
-# will always call tclpip83.dll and not tclpip83d.dll, causing an error.
-# ^
-# Besides, the debug version goes into a separate directory, so there
-# should be no problem having DLLs and EXEs with the same name.
-# If you prefer your debug version having the 'd' suffix just uncomment
-# the line
-# #DBGX = d
-#
-# - To make a 'normal' version enter
-# make -fmakefile.bc xxx
-# where 'xxx' is the target you want (e.g. 'all', 'test', ...)
-#
-# DISCLAIMER:
-# This makefile has an experimental status - that is those targets which
-# have been modified do in fact compile and link with Borland's C++
-# Builder 5 and with the free Borland compiler (Borland C++ 5.5).
-# However the author assumes no responsiblity for any effect which the use of
-# this makefile or of the resulting programs might have on your system.
-#
-# Not yet modified:
-# - The 'plug-in-DLL' and the associated shell.
-#
-# Suggestions and / or improvements are always welcome.
-#
-# May 2001, H. Giese (hgiese@ratiosoft.com)
-#
-
-# Does not depend on the presence of any environment variables in
-# order to compile tcl; all needed information is derived from
-# location of the compiler directories.
-
-#
-# Project directories
-#
-# ROOT = top of source tree
-#
-# TOOLS32 = location of Borland development tools.
-#
-# INSTALLDIR = where the install-targets should copy the binaries and
-# support files
-#
-
-ROOT = ..
-INSTALLDIR = c:\program files\tcl
-
-# If you have C++ Builder 5 or the free Borland C++ 5.5 compiler
-# adapt the following paths as appropriate for your system
-TOOLS32 = c:\dev\bcc55
-TOOLS32_rc = c:\dev\bcc55
-#TOOLS32 = c:\bc55
-#TOOLS32_rc = c:\bc55
-
-cc32 = "$(TOOLS32)\bin\bcc32.exe"
-link32 = "$(TOOLS32)\bin\ilink32.exe"
-lib32 = "$(TOOLS32)\bin\tlib.exe"
-rc32 = "$(TOOLS32_rc)\bin\brcc32.exe"
-include32 = -I"$(TOOLS32)\include"
-libpath32 = -L"$(TOOLS32)\lib"
-
-# Uncomment the following line to compile with thread support
-#THREADDEFINES = -DTCL_THREADS=1
-
-# Allow definition of NDEBUG via command line
-# Set NODEBUG to 0 to compile with symbols
-!if !defined(NODEBUG)
-NODEBUG = 1
-!endif
-
-# CFG_ENCODING=encoding
-# name of encoding for configuration information. Defaults
-# to cp1252
-!if !defined(CFG_ENCODING)
-CFG_ENCODING = \"cp1252\"
-!endif
-
-# The following defines can be used to control the amount of debugging
-# code that is added to the compilation.
-#
-# -DTCL_MEM_DEBUG Enables the debugging memory allocator.
-# -DTCL_COMPILE_DEBUG Enables byte compilation logging.
-# -DTCL_COMPILE_STATS Enables byte compilation statistics gathering.
-# -DUSE_TCLALLOC=0 Disables the Tcl memory allocator in favor
-# of the native malloc implementation. This is
-# needed when using Purify.
-#
-#DEBUGDEFINES = -DTCL_MEM_DEBUG -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
-#DEBUGDEFINES = -DUSE_TCLALLOC=0
-
-######################################################################
-# Do not modify below this line
-######################################################################
-
-NAMEPREFIX = tcl
-STUBPREFIX = $(NAMEPREFIX)stub
-DOTVERSION = 8.6
-VERSION = 86
-
-DDEVERSION = 14
-DDEDOTVERSION = 1.4
-
-REGVERSION = 13
-REGDOTVERSION = 1.3
-
-BINROOT = ..
-!IF "$(NODEBUG)" == "1"
-TMPDIRNAME = Release
-DBGX =
-SYMDEFINES = -DNDEBUG
-!ELSE
-TMPDIRNAME = Debug
-#DBGX = d
-DBGX =
-SYMDEFINES = -DTCL_CFG_DEBUG
-!ENDIF
-TMPDIR = $(BINROOT)\$(TMPDIRNAME)
-OUTDIRNAME = $(TMPDIRNAME)
-OUTDIR = $(TMPDIR)
-
-TCLLIB = $(OUTDIR)\$(NAMEPREFIX)$(VERSION)$(DBGX).lib
-TCLDLLNAME = $(NAMEPREFIX)$(VERSION)$(DBGX).dll
-TCLDLL = $(OUTDIR)\$(TCLDLLNAME)
-
-TCLSTUBLIBNAME = $(STUBPREFIX)$(VERSION)$(DBGX).lib
-TCLSTUBLIB = $(OUTDIR)\$(TCLSTUBLIBNAME)
-
-TCLPLUGINLIB = $(OUTDIR)\$(NAMEPREFIX)$(VERSION)p$(DBGX).lib
-TCLPLUGINDLLNAME = $(NAMEPREFIX)$(VERSION)p$(DBGX).dll
-TCLPLUGINDLL = $(OUTDIR)\$(TCLPLUGINDLLNAME)
-TCLSH = $(OUTDIR)\$(NAMEPREFIX)sh$(VERSION)$(DBGX).exe
-TCLSHP = $(OUTDIR)\$(NAMEPREFIX)shp$(VERSION)$(DBGX).exe
-TCLREGDLLNAME = $(NAMEPREFIX)reg$(REGVERSION)$(DBGX).dll
-TCLREGDLL = $(OUTDIR)\$(TCLREGDLLNAME)
-TCLDDEDLLNAME = $(NAMEPREFIX)dde$(DDEVERSION)$(DBGX).dll
-TCLDDEDLL = $(OUTDIR)\$(TCLDDEDLLNAME)
-TCLTEST = $(OUTDIR)\$(NAMEPREFIX)test.exe
-CAT32 = $(TMPDIR)\cat32.exe
-RMDIR = .\rmd.bat
-MKDIR = .\mkd.bat
-RM = del
-
-LIB_INSTALL_DIR = $(INSTALLDIR)\lib
-BIN_INSTALL_DIR = $(INSTALLDIR)\bin
-SCRIPT_INSTALL_DIR = $(INSTALLDIR)\lib\tcl$(DOTVERSION)
-INCLUDE_INSTALL_DIR = $(INSTALLDIR)\include
-
-TCLSHOBJS = \
- $(TMPDIR)\tclAppInit.obj
-
-TCLTESTOBJS = \
- $(TMPDIR)\tclTest.obj \
- $(TMPDIR)\tclTestObj.obj \
- $(TMPDIR)\tclTestProcBodyObj.obj \
- $(TMPDIR)\tclThreadTest.obj \
- $(TMPDIR)\tclWinTest.obj \
- $(TMPDIR)\testMain.obj
-
-TCLOBJS = \
- $(TMPDIR)\regcomp.obj \
- $(TMPDIR)\regexec.obj \
- $(TMPDIR)\regfree.obj \
- $(TMPDIR)\regerror.obj \
- $(TMPDIR)\tclAlloc.obj \
- $(TMPDIR)\tclAsync.obj \
- $(TMPDIR)\tclBasic.obj \
- $(TMPDIR)\tclBinary.obj \
- $(TMPDIR)\tclCkalloc.obj \
- $(TMPDIR)\tclClock.obj \
- $(TMPDIR)\tclCmdAH.obj \
- $(TMPDIR)\tclCmdIL.obj \
- $(TMPDIR)\tclCmdMZ.obj \
- $(TMPDIR)\tclCompCmds.obj \
- $(TMPDIR)\tclCompCmdsGR.obj \
- $(TMPDIR)\tclCompCmdsSZ.obj \
- $(TMPDIR)\tclCompExpr.obj \
- $(TMPDIR)\tclCompile.obj \
- $(TMPDIR)\tclConfig.obj \
- $(TMPDIR)\tclDate.obj \
- $(TMPDIR)\tclDictObj.obj \
- $(TMPDIR)\tclDisassemble.obj \
- $(TMPDIR)\tclEncoding.obj \
- $(TMPDIR)\tclEnsemble.obj \
- $(TMPDIR)\tclEnv.obj \
- $(TMPDIR)\tclEvent.obj \
- $(TMPDIR)\tclExecute.obj \
- $(TMPDIR)\tclFCmd.obj \
- $(TMPDIR)\tclFileName.obj \
- $(TMPDIR)\tclGet.obj \
- $(TMPDIR)\tclHash.obj \
- $(TMPDIR)\tclHistory.obj \
- $(TMPDIR)\tclIndexObj.obj \
- $(TMPDIR)\tclInterp.obj \
- $(TMPDIR)\tclIO.obj \
- $(TMPDIR)\tclIOCmd.obj \
- $(TMPDIR)\tclIOGT.obj \
- $(TMPDIR)\tclIOSock.obj \
- $(TMPDIR)\tclIOUtil.obj \
- $(TMPDIR)\tclLink.obj \
- $(TMPDIR)\tclLiteral.obj \
- $(TMPDIR)\tclListObj.obj \
- $(TMPDIR)\tclLoad.obj \
- $(TMPDIR)\tclMain.obj \
- $(TMPDIR)\tclNamesp.obj \
- $(TMPDIR)\tclNotify.obj \
- $(TMPDIR)\tclOO.obj \
- $(TMPDIR)\tclOOBasic.obj \
- $(TMPDIR)\tclOOCall.obj \
- $(TMPDIR)\tclOODefineCmds.obj \
- $(TMPDIR)\tclOOInfo.obj \
- $(TMPDIR)\tclOOMethod.obj \
- $(TMPDIR)\tclOOStubInit.obj \
- $(TMPDIR)\tclObj.obj \
- $(TMPDIR)\tclOptimize.obj \
- $(TMPDIR)\tclPanic.obj \
- $(TMPDIR)\tclParse.obj \
- $(TMPDIR)\tclPipe.obj \
- $(TMPDIR)\tclPkg.obj \
- $(TMPDIR)\tclPkgConfig.obj \
- $(TMPDIR)\tclPosixStr.obj \
- $(TMPDIR)\tclPreserve.obj \
- $(TMPDIR)\tclProc.obj \
- $(TMPDIR)\tclRegexp.obj \
- $(TMPDIR)\tclResolve.obj \
- $(TMPDIR)\tclResult.obj \
- $(TMPDIR)\tclScan.obj \
- $(TMPDIR)\tclStringObj.obj \
- $(TMPDIR)\tclStubInit.obj \
- $(TMPDIR)\tclThread.obj \
- $(TMPDIR)\tclThreadJoin.obj \
- $(TMPDIR)\tclTimer.obj \
- $(TMPDIR)\tclTrace.obj \
- $(TMPDIR)\tclUtf.obj \
- $(TMPDIR)\tclUtil.obj \
- $(TMPDIR)\tclVar.obj \
- $(TMPDIR)\tclWin32Dll.obj \
- $(TMPDIR)\tclWinChan.obj \
- $(TMPDIR)\tclWinConsole.obj \
- $(TMPDIR)\tclWinSerial.obj \
- $(TMPDIR)\tclWinError.obj \
- $(TMPDIR)\tclWinFCmd.obj \
- $(TMPDIR)\tclWinFile.obj \
- $(TMPDIR)\tclWinInit.obj \
- $(TMPDIR)\tclWinLoad.obj \
- $(TMPDIR)\tclWinNotify.obj \
- $(TMPDIR)\tclWinPipe.obj \
- $(TMPDIR)\tclWinSock.obj \
- $(TMPDIR)\tclWinThrd.obj \
- $(TMPDIR)\tclWinTime.obj \
- $(TMPDIR)\tclZlib.obj
-
-TCLSTUBOBJS = \
- $(TMPDIR)\tclStubLib.obj \
- $(TMPDIR)\tclTomMathStubLib.obj \
- $(TMPDIR)\tclOOStubLib.obj
-
-WINDIR = $(ROOT)\win
-GENERICDIR = $(ROOT)\generic
-
-TCL_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)"
-TCL_DEFINES = $(DEBUGDEFINES) $(THREADDEFINES) $(SYMDEFINES) \
- $(PROFDEFINES) $(OPTDEFINES) $(SIXFOURDEFINES) \
- -DTCL_CFGVAL_ENCODING=${CFG_ENCODING}
-### TODO: Add -DHAVE_ZLIB=1
-
-######################################################################
-# Compiler flags
-######################################################################
-
-!IF "$(NODEBUG)" == "1"
-# these macros cause maximum optimization and no symbols
-cdebug = -v- -vi- -O2 -D_DEBUG
-!ELSE
-# these macros enable debugging
-cdebug = -k -Od -r- -v -vi- -y
-!ENDIF
-
-SYSDEFINES = _MT;NO_STRICT;_NO_VCL
-
-# declarations common to all compiler options
-cbase = -c -q -3 -a4 -g0 -tWM -Ve -Vx -X-
-WARNINGS = -w-rch -w-pch -w-par -w-dup -w-pro -w-dpu
-
-ccons = -tWC
-
-INCLUDEPATH = $(include32) $(TCL_INCLUDES)
-
-CFLAGS = $(cdebug) $(cbase) $(INCLUDEPATH) $(WARNINGS) -D$(SYSDEFINES)
-TCL_CFLAGS = $(CFLAGS) $(TCL_DEFINES)
-CONS_CFLAGS = $(CFLAGS) $(TCL_DEFINES) $(ccons)
-
-######################################################################
-# Linker flags
-######################################################################
-
-!IF "$(NODEBUG)" == "1"
-ldebug =
-!ELSE
-ldebug = -v
-!ENDIF
-
-# declarations common to all linker options
-LNFLAGS = -D"" -Gn -I$(TMPDIR) -x $(ldebug) $(libpath32)
-# -Gi: create lib file (is -Gl in doc)
-# -aa: Windows app, -ap: Windows console app
-LNFLAGS_DLL = -ap -Gi -Tpd
-LNFLAGS_CONS = -ap -Tpe
-
-LNLIBS = import32 cw32mt
-
-
-######################################################################
-# Project specific targets
-######################################################################
-
-release: setup $(TCLSH) dlls
-dlls: setup $(TCLREGDLL) $(TCLDDEDLL)
-all: setup $(TCLSH) dlls $(CAT32)
-tcltest: setup $(TCLTEST) dlls $(CAT32)
-plugin: setup $(TCLPLUGINDLL) $(TCLSHP)
-install: install-binaries install-libraries
-
-test: setup $(TCLTEST) dlls $(CAT32)
- set TCL_LIBRARY=$(ROOT)/library
- $(TCLTEST) $(ROOT)/tests/all.tcl
-
-setup:
- @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) &\
- echo *** Created directory '$(OUT_DIR)'
- @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) &\
- echo *** Created directory '$(TMP_DIR)'
-
-
-$(TCLLIB): $(TCLDLL)
-
-$(TCLDLL): $(TCLOBJS) $(TMPDIR)\$(NAMEPREFIX).res
- $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 @&&!
- $(TCLOBJS), $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res
-!
-
-$(TCLSTUBLIB): $(TCLSTUBOBJS)
- $(lib32) /u $@ $(TCLSTUBOBJS)
-
-$(TCLPLUGINLIB): $(TCLPLUGINDLL)
-
-$(TCLPLUGINDLL): $(TCLOBJS) $(TMPDIR)\tcl.res
- $(link32) $(ldebug) $(dlllflags) \
- -out:$@ $(TMPDIR)\tcl.res $(guilibsdll) @&&!
-$(TCLOBJS)
-!
-
-$(TCLSH): $(TCLSHOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res
- $(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!
- $(TCLSHOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res
-!
-
-$(TCLSHP): $(TCLSHOBJS) $(TCLPLUGINLIB) $(TMPDIR)\tclsh.res
- $(link32) $(ldebug) $(conlflags) $(TMPDIR)\tclsh.res -stack:2300000 \
- -out:$@ $(conlibsdll) $(TCLPLUGINLIB) $(TCLSHOBJS)
-
-$(TCLTEST): $(TCLTESTOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res
- $(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!
- $(TCLTESTOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res
-!
-
-$(TCLDDEDLL): $(TMPDIR)\tclWinDde.obj $(TCLSTUBLIB)
- $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \
- $(TMPDIR)\tclWinDde.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \
- $(TMPDIR)\$(NAMEPREFIX).res
-
-$(TCLREGDLL): $(TMPDIR)\tclWinReg.obj $(TCLSTUBLIB)
- $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \
- $(TMPDIR)\tclWinReg.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \
- $(TMPDIR)\$(NAMEPREFIX).res
-
-$(CAT32): $(WINDIR)\cat.c
- $(cc32) $(CONS_CFLAGS) -o$(TMPDIR)\cat.obj $?
- $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \
- $(TMPDIR)\cat.obj, $@, -x, $(LNLIBS),,
-
-install-binaries: $(TCLSH)
- $(MKDIR) "$(BIN_INSTALL_DIR)"
- $(MKDIR) "$(LIB_INSTALL_DIR)"
- @echo Installing $(TCLDLLNAME)
- @copy "$(TCLDLL)" "$(BIN_INSTALL_DIR)"
- @copy "$(TCLLIB)" "$(LIB_INSTALL_DIR)"
- @echo Installing "$(TCLSH)"
- @copy "$(TCLSH)" "$(BIN_INSTALL_DIR)"
- @echo Installing $(TCLSTUBLIBNAME)
- @copy "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)"
- @echo Installing $(WINDIR)\tclooConfig.sh
- @copy "$(WINDIR)\tclooConfig.sh" "$(LIB_INSTALL_DIR)"
-
-install-libraries:
- -@$(MKDIR) "$(LIB_INSTALL_DIR)"
- -@$(MKDIR) "$(INCLUDE_INSTALL_DIR)"
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)"
- @echo Installing http1.0
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http1.0"
- -@copy "$(ROOT)\library\http1.0\http.tcl" "$(SCRIPT_INSTALL_DIR)\http1.0"
- -@copy "$(ROOT)\library\http1.0\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http1.0"
- @echo Installing http2.8
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http2.8"
- -@copy "$(ROOT)\library\http\http.tcl" "$(SCRIPT_INSTALL_DIR)\http2.8"
- -@copy "$(ROOT)\library\http\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http2.8"
- @echo Installing opt0.4
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\opt0.4"
- -@copy "$(ROOT)\library\opt\optparse.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
- -@copy "$(ROOT)\library\opt\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
- @echo Installing msgcat1.5
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
- -@copy "$(ROOT)\library\msgcat\msgcat.tcl" "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
- -@copy "$(ROOT)\library\msgcat\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
- @echo Installing tcltest2.3
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
- -@copy "$(ROOT)\library\tcltest\tcltest.tcl" "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
- -@copy "$(ROOT)\library\tcltest\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\tcltest2.3"
- @echo Installing platform1.0
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\platform1.0"
- -@copy "$(ROOT)\library\platform\platform.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
- -@copy "$(ROOT)\library\platform\shell.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
- -@copy "$(ROOT)\library\platform\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
- @echo Installing $(TCLDDEDLLNAME)
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\dde1.3"
- -@copy "$(TCLDDEDLL)" "$(SCRIPT_INSTALL_DIR)\dde1.3"
- -@copy "$(ROOT)\library\dde\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\dde1.3"
- @echo Installing $(TCLREGDLLNAME)
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\reg1.2"
- -@copy "$(TCLREGDLL)" "$(SCRIPT_INSTALL_DIR)\reg1.3"
- -@copy "$(ROOT)\library\reg\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\reg1.2"
- @echo Installing encoding files
- -@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\encoding"
- -@copy "$(ROOT)\library\encoding\*.enc" "$(SCRIPT_INSTALL_DIR)\encoding"
- @echo Installing library files
- -@copy "$(GENERICDIR)\tcl.h" "$(INCLUDE_INSTALL_DIR)"
- -@copy "$(GENERICDIR)\tclDecls.h" "$(INCLUDE_INSTALL_DIR)"
- -@copy "$(GENERICDIR)\tclOO.h" "$(INCLUDE_INSTALL_DIR)"
- -@copy "$(GENERICDIR)\tclOODecls.h" "$(INCLUDE_INSTALL_DIR)"
- -@copy "$(GENERICDIR)\tclPlatDecls.h" "$(INCLUDE_INSTALL_DIR)"
- -@copy "$(ROOT)\library\history.tcl" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\init.tcl" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\parray.tcl" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\safe.tcl" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\tclIndex" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\package.tcl" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\word.tcl" "$(SCRIPT_INSTALL_DIR)"
- -@copy "$(ROOT)\library\auto.tcl" "$(SCRIPT_INSTALL_DIR)"
-
-#
-# Regenerate the stubs files.
-#
-
-genstubs:
- tclsh$(VERSION) $(ROOT)\tools\genStubs.tcl $(GENERICDIR) \
- $(GENERICDIR)\tcl.decls $(GENERICDIR)\tclInt.decls
-
-#
-# Special case object file targets
-#
-$(TMPDIR)\tclWinInit.obj: $(WINDIR)\tclWinInit.c
- $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\testMain.obj: $(WINDIR)\tclAppInit.c
- $(cc32) $(TCL_CFLAGS) -DTCL_TEST -o$(TMPDIR)\testMain.obj $?
-
-$(TMPDIR)\tclTest.obj: $(GENERICDIR)\tclTest.c
- $(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c
- $(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\tclWinTest.obj: $(WINDIR)\tclWinTest.c
- $(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-$(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c
- $(cc32) $(TCL_CFLAGS) \
- -DCFG_INSTALL_EXEC_PREFIX=\"$(INSTALL_EXEC_PREFIX)\" \
- -DCFG_INSTALL_PREFIX=\"$(INSTALL_PREFIX)\" \
- -DCFG_RUNTIME_EXEC_PREFIX=\"$(RUNTIME_EXEC_PREFIX)\" \
- -DCFG_RUNTIME_PREFIX=\"$(RUNTIME_PREFIX)\" \
- -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\tclAppInit.obj : $(WINDIR)\tclAppInit.c
- $(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?
-
-# The following objects should be built using the stub interfaces
-
-# tclWinReg: Produces errors in ANSI mode
-$(TMPDIR)\tclWinReg.obj : $(WINDIR)\tclWinReg.c
- $(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?
-
-# tclWinDde: Produces errors in ANSI mode
-$(TMPDIR)\tclWinDde.obj : $(WINDIR)\tclWinDde.c
- $(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?
-
-
-# The following objects are part of the stub library and should not
-# be built as DLL objects but none of the symbols should be exported
-
-$(TMPDIR)\tclStubLib.obj : $(GENERICDIR)\tclStubLib.c
- $(cc32) $(TCL_CFLAGS) -DSTATIC_BUILD -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\tclTomMathStubLib.obj : $(GENERICDIR)\tclTomMathStubLib.c
- $(cc32) $(TCL_CFLAGS) -DSTATIC_BUILD -o$(TMPDIR)\$@ $?
-
-$(TMPDIR)\tclOOStubLib.obj : $(GENERICDIR)\tclOOStubLib.c
- $(cc32) $(TCL_CFLAGS) -DSTATIC_BUILD -o$(TMPDIR)\$@ $?
-
-
-# Dedependency rules
-
-$(GENERICDIR)\regcomp.c: \
- $(GENERICDIR)\regguts.h \
- $(GENERICDIR)\regc_lex.c \
- $(GENERICDIR)\regc_color.c \
- $(GENERICDIR)\regc_nfa.c \
- $(GENERICDIR)\regc_cvec.c \
- $(GENERICDIR)\regc_locale.c
-
-$(GENERICDIR)\regcustom.h: \
- $(GENERICDIR)\tclInt.h \
- $(GENERICDIR)\tclPort.h \
- $(GENERICDIR)\regex.h
-
-$(GENERICDIR)\regexec.c: \
- $(GENERICDIR)\rege_dfa.c \
- $(GENERICDIR)\regguts.h
-
-$(GENERICDIR)\regerror.c: $(GENERICDIR)\regguts.h
-$(GENERICDIR)\regfree.c: $(GENERICDIR)\regguts.h
-$(GENERICDIR)\regfronts.c: $(GENERICDIR)\regguts.h
-$(GENERICDIR)\regguts.h: $(GENERICDIR)\regcustom.h
-
-#
-# Implicit rules
-#
-
-{$(WINDIR)}.c{$(TMPDIR)}.obj:
- $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
-
-{$(GENERICDIR)}.c{$(TMPDIR)}.obj:
- $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
-
-{$(ROOT)\compat}.c{$(TMPDIR)}.obj:
- $(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<
-
-{$(WINDIR)}.rc{$(TMPDIR)}.res:
- $(rc32) $(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
-
-clean:
- -@$(RM) $(OUTDIR)\*.exp
- -@$(RM) $(OUTDIR)\*.lib
- -@$(RM) $(OUTDIR)\*.dll
- -@$(RM) $(OUTDIR)\*.exe
- -@$(RM) $(OUTDIR)\*.pdb
- -@$(RM) $(TMPDIR)\*.pch
- -@$(RM) $(TMPDIR)\*.obj
- -@$(RM) $(TMPDIR)\*.res
- -@$(RM) $(TMPDIR)\*.exe
- -@$(RMDIR) $(OUTDIR)
- -@$(RMDIR) $(TMPDIR)
-
-# Local Variables:
-# mode: makefile
-# End: