diff options
Diffstat (limited to 'win/tclWinConsole.c')
| -rw-r--r-- | win/tclWinConsole.c | 401 |
1 files changed, 177 insertions, 224 deletions
diff --git a/win/tclWinConsole.c b/win/tclWinConsole.c index 14cc6e5..08e7e56 100644 --- a/win/tclWinConsole.c +++ b/win/tclWinConsole.c @@ -10,7 +10,6 @@ * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ -#define TCL_CONSOLE_DEBUG #ifdef TCL_CONSOLE_DEBUG #undef NDEBUG /* Enable asserts */ #endif @@ -55,7 +54,14 @@ static int initialized = 0; -#define CONSOLE_BUFFER_SIZE 8000 // TODO - must be at least 2 :-) +#ifdef TCL_CONSOLE_DEBUG +#ifndef CONSOLE_BUFFER_SIZE +/* Force tiny to stress synchronization. Must be at least sizeof(WCHAR) :-) */ +#define CONSOLE_BUFFER_SIZE 10 +#endif +#else +#define CONSOLE_BUFFER_SIZE 4000 /* In bytes */ +#endif /* * Ring buffer for storing data. Actual data is from bufPtr[start]:bufPtr[size-1] @@ -227,9 +233,7 @@ static ConsoleHandleInfo *AllocateConsoleHandleInfo(HANDLE consoleHandle, static ConsoleHandleInfo *FindConsoleInfo(const ConsoleChannelInfo *); static DWORD WINAPI ConsoleReaderThread(LPVOID arg); static DWORD WINAPI ConsoleWriterThread(LPVOID arg); -#ifdef OBSOLETE -static int WaitForRead(ConsoleChannelInfo *infoPtr, int blocking); -#endif +static void NudgeWatchers(HANDLE consoleHandle); /* * Static data. @@ -251,10 +255,6 @@ static Tcl_ThreadDataKey dataKey; * likely not only complicate implementation but be slower due to multiple * locks being held. Note console channels also differ from other Tcl * channel types in that the channel<->OS descriptor mapping is not one-to-one. - * - * The gConsoleLock locks around access to the initialized variable, and it - * is used to protect background threads from being terminated while they - * are using APIs that hold locks. TBD - is this still true? */ SRWLOCK gConsoleLock; @@ -374,7 +374,6 @@ RingBufferIn( ) { RingSizeT freeSpace; - RingSizeT endSpace; RINGBUFFER_ASSERT(ringPtr); @@ -387,23 +386,25 @@ RingBufferIn( srcLen = freeSpace; } - /* Copy as much as possible to the tail */ if (ringPtr->capacity - ringPtr->start > ringPtr->length) { /* There is room at the back */ RingSizeT endSpaceStart = ringPtr->start + ringPtr->length; - endSpace = ringPtr->capacity - endSpaceStart; - if (endSpace > srcLen) { - endSpace = srcLen; + RingSizeT endSpace = ringPtr->capacity - endSpaceStart; + if (endSpace >= srcLen) { + /* Everything fits at the back */ + memmove(endSpaceStart + ringPtr->bufPtr, srcPtr, srcLen); + } + else { + /* srcLen > endSpace */ + memmove(endSpaceStart + ringPtr->bufPtr, srcPtr, endSpace); + memmove(ringPtr->bufPtr, endSpace + srcPtr, srcLen - endSpace); } - memmove(endSpaceStart + ringPtr->bufPtr, srcPtr, endSpace); } else { - endSpace = 0; - } - - /* Wrap around any left over data. Have already copied endSpace bytes */ - if (srcLen > endSpace) { - memmove(ringPtr->bufPtr, endSpace + srcPtr, srcLen - endSpace); + /* No room at the back. Existing data wrap to front. */ + RingSizeT wrapLen = + ringPtr->start + ringPtr->length - ringPtr->capacity; + memmove(wrapLen + ringPtr->bufPtr, srcPtr, srcLen); } ringPtr->length += srcLen; @@ -716,6 +717,43 @@ ProcExitHandler( } /* + *------------------------------------------------------------------------ + * + * NudgeWatchers -- + * + * Wakes up all threads which have file event watchers on the passed + * console handle. + * + * The function locks and releases gConsoleLock. + * Caller must not be holding locks that will violate lock hierarchy. + * + * Results: + * None. + * + * Side effects: + * As above. + *------------------------------------------------------------------------ + */ +void NudgeWatchers (HANDLE consoleHandle) +{ + ConsoleChannelInfo *chanInfoPtr; + AcquireSRWLockShared(&gConsoleLock); /* Shared-read lock */ + for (chanInfoPtr = gWatchingChannelList; chanInfoPtr; + chanInfoPtr = chanInfoPtr->nextWatchingChannelPtr) { + /* + * Notify channels interested in our handle AND that have + * a thread attached. + * No lock needed for chanInfoPtr. See ConsoleChannelInfo. + */ + if (chanInfoPtr->handle == consoleHandle + && chanInfoPtr->threadId != NULL) { + Tcl_ThreadAlert(chanInfoPtr->threadId); + } + } + ReleaseSRWLockShared(&gConsoleLock); +} + +/* *---------------------------------------------------------------------- * * ConsoleSetupProc -- @@ -760,10 +798,12 @@ ConsoleSetupProc( if (handleInfoPtr != NULL) { AcquireSRWLockShared(&handleInfoPtr->lock); if ((chanInfoPtr->watchMask & TCL_READABLE) - && RingBufferLength(&handleInfoPtr->buffer) > 0) { + && (RingBufferLength(&handleInfoPtr->buffer) > 0 + || handleInfoPtr->lastError != ERROR_SUCCESS)) { block = 0; /* Input data available */ } else if (RingBufferFreeSpace(&handleInfoPtr->buffer) > 0) { + /* TCL_WRITABLE */ block = 0; /* Output space available */ } ReleaseSRWLockShared(&handleInfoPtr->lock); @@ -837,8 +877,9 @@ ConsoleCheckProc( if (handleInfoPtr != NULL) { AcquireSRWLockShared(&handleInfoPtr->lock); if ((chanInfoPtr->watchMask & TCL_READABLE) - && RingBufferLength(&handleInfoPtr->buffer) > 0) { - needEvent = 1; /* Input data available */ + && (RingBufferLength(&handleInfoPtr->buffer) > 0 + || handleInfoPtr->lastError != ERROR_SUCCESS)) { + needEvent = 1; /* Input data available or error/EOF */ } else if (RingBufferFreeSpace(&handleInfoPtr->buffer) > 0) { needEvent = 1; /* Output space available */ @@ -974,7 +1015,7 @@ ConsoleCloseProc( * Don't close the Win32 handle if the handle is a standard channel * during the thread exit process. Otherwise, one thread may kill the * stdio of another. TODO - an explicit close in script will still close - * it. + * it. Is that desired behavior? */ if (!TclInThreadExit() || ((GetStdHandle(STD_INPUT_HANDLE) != chanInfoPtr->handle) @@ -1050,8 +1091,8 @@ ConsoleInputProc( /* * No data available. * - If an error was recorded, generate that and reset it. - * - If EOF, indicate as much. TODO - can console thread still be - * running in that case? + * - If EOF, indicate as much. It is up to application to close + * the channel. * - Otherwise, if non-blocking return EAGAIN or wait for more data. */ if (handleInfoPtr->lastError != 0) { @@ -1374,112 +1415,6 @@ ConsoleGetHandleProc( return TCL_OK; } -#ifdef OBSOLETE -/* - *---------------------------------------------------------------------- - * - * WaitForRead -- - * - * Wait until some data is available, the console is at EOF or the reader - * thread is blocked waiting for data (if the channel is in non-blocking - * mode). - * - * Results: - * Returns 1 if console is readable. Returns 0 if there is no data on the - * console, but there is buffered data. Returns -1 if an error occurred. - * If an error occurred, the threads may not be synchronized. - * - * Side effects: - * Updates the shared state flags. If no error occurred, the reader - * thread is blocked waiting for a signal from the main thread. - * - *---------------------------------------------------------------------- - */ - -static int -WaitForRead( - ConsoleChannelInfo *infoPtr, /* Console state. */ - int blocking) /* Indicates whether call should be blocking - * or not. */ -{ - DWORD timeout, count; - HANDLE *handle = (HANDLE *)infoPtr->handle; - ConsoleThreadInfo *threadInfo = &infoPtr->reader; - INPUT_RECORD input; - - while (1) { - /* - * Synchronize with the reader thread. - */ - - /* avoid blocking if pipe-thread exited */ - timeout = (!blocking || !TclPipeThreadIsAlive(&threadInfo->TI) - || TclInExit() || TclInThreadExit()) ? 0 : INFINITE; - if (WaitForSingleObject(threadInfo->readyEvent, timeout) == WAIT_TIMEOUT) { - /* - * The reader thread is blocked waiting for data and the channel - * is in non-blocking mode. - */ - - errno = EWOULDBLOCK; - return -1; - } - - /* - * At this point, the two threads are synchronized, so it is safe to - * access shared state. - */ - - /* - * If the console has hit EOF, it is always readable. - */ - - if (infoPtr->readFlags & CONSOLE_EOF) { - return 1; - } - - if (PeekConsoleInputW(handle, &input, 1, &count) == FALSE) { - /* - * Check to see if the peek failed because of EOF. - */ - - Tcl_WinConvertError(GetLastError()); - - if (errno == EOF) { - infoPtr->readFlags |= CONSOLE_EOF; - return 1; - } - - /* - * Ignore errors if there is data in the buffer. - */ - - if (infoPtr->readFlags & CONSOLE_BUFFERED) { - return 0; - } else { - return -1; - } - } - - /* - * If there is data in the buffer, the console must be readable (since - * it is a line-oriented device). - */ - - if (infoPtr->readFlags & CONSOLE_BUFFERED) { - return 1; - } - - /* - * There wasn't any data available, so reset the thread and try again. - */ - - ResetEvent(threadInfo->readyEvent); - TclPipeThreadSignal(&threadInfo->TI); - } -} -#endif - /* *---------------------------------------------------------------------- * @@ -1526,48 +1461,74 @@ ConsoleReaderThread( while (1) { if (handleInfoPtr->numRefs == 1) { - /* Sole reference. That's this thread. Exit since no one clients */ + /* + * Sole reference. That's this thread. Exit since no clients + * and no way for a thread to attach to a console after process + * start. + */ break; } + /* + * Cases: + * (1) The shared input buffer is full. Have to wait for an interp + * thread to read from it and make room. + * (2) The shared input buffer has room and the thread private buffer + * has data. Copy into the shared input buffer. + * (3) The channel has previously seen an error. Treat as EOF. Note + * this check is after the above so any data already available + * is passed on. + * (4) Neither buffer has data and no errors. Go get some from console. + * + * There is some duplication of code below but easier to think about + * rather than combining cases. + */ if (RingBufferFreeSpace(&handleInfoPtr->buffer) == 0) { - /* No room in buffer. Awaken any reader channels */ + /* Case (1) No room in buffer.*/ + + /* Awaken any reader channels - TODO - is this really needed? */ WakeConditionVariable(&handleInfoPtr->interpThreadCV); - /* XXX - does not wake up fileevent channels! */ /* Release lock and wait for room */ success = SleepConditionVariableSRW(&handleInfoPtr->consoleThreadCV, &handleInfoPtr->lock, INFINITE, 0); - /* Note: lock has been acquired again! */ + /* Note: lock has been reacquired */ if (!success && GetLastError() != ERROR_TIMEOUT) { /* TODO - what can be done? Should not happen */ /* For now keep going */ } - continue; /* Restart loop so we can check for exit conditions */ - } - - /* - * The shared buffer now has room. If we had any leftover from last - * read, store that. - */ - if (inputLen > 0) { - RingSizeT nStored; + } else if (inputLen > 0 || handleInfoPtr->lastError != 0) { + /* Cases (2) and (3) - require notifications to interpreters */ HANDLE consoleHandle; - ConsoleChannelInfo *chanInfoPtr; - - nStored = RingBufferIn(&handleInfoPtr->buffer, - inputOffset + inputChars, - inputLen - inputOffset, - 1); - inputOffset += nStored; - if (inputOffset == inputLen) { - /* Temp buffer now empty */ - inputOffset = 0; - inputLen = 0; + if (inputLen > 0) { + /* + * Case (2). Private buffer has data. Copy it over. + */ + RingSizeT nStored; + + assert((inputLen - inputOffset) > 0); + + nStored = RingBufferIn(&handleInfoPtr->buffer, + inputOffset + inputChars, + inputLen - inputOffset, + 1); + inputOffset += nStored; + if (inputOffset == inputLen) { + /* Temp buffer now empty */ + inputOffset = 0; + inputLen = 0; + } } + else { + /* + * Case (3). On error, nothing but inform caller and wait + * We do not want to exit until there are no client interps. + */ + } + /* Wake up any threads waiting synchronously. */ WakeConditionVariable(&handleInfoPtr->interpThreadCV); @@ -1578,38 +1539,33 @@ ConsoleReaderThread( * relock it. */ consoleHandle = handleInfoPtr->console; + /* + * Wake up all channels registered for file events. Note in + * order to follow the locking hierarchy, we cannot hold any locks + * when calling NudgeWatchers. + */ ReleaseSRWLockExclusive(&handleInfoPtr->lock); - AcquireSRWLockShared(&gConsoleLock); /* Shared-read lock */ - for (chanInfoPtr = gWatchingChannelList; chanInfoPtr; - chanInfoPtr = chanInfoPtr->nextWatchingChannelPtr) { - /* - * Notify channels interested in our handle AND that have - * a thread attached. - * No lock needed for chanInfoPtr. See ConsoleChannelInfo. - */ - if (chanInfoPtr->handle == consoleHandle - && chanInfoPtr->threadId != NULL) { - Tcl_ThreadAlert(chanInfoPtr->threadId); - } + NudgeWatchers(consoleHandle); + + AcquireSRWLockExclusive(&handleInfoPtr->lock); + } + else { + /* + * Case (4). Need to go get more data from console. We only + * store the last error. It is up to channel handlers to decide + * whether to close or what to do. + */ + ReleaseSRWLockExclusive(&handleInfoPtr->lock); + handleInfoPtr->lastError = + ReadConsoleChars(handleInfoPtr->console, + (WCHAR *)inputChars, + sizeof(inputChars) / sizeof(WCHAR), + &inputLen); + if (handleInfoPtr->lastError == 0) { + inputLen *= sizeof(WCHAR); } - ReleaseSRWLockShared(&gConsoleLock); AcquireSRWLockExclusive(&handleInfoPtr->lock); - continue; /* Restart loop */ } - - /* - * Need to go get more data from console. We only store the last - * error. It is up to channel handlers to decide whether to close or - * what to do. - */ - ReleaseSRWLockExclusive(&handleInfoPtr->lock); - handleInfoPtr->lastError = - ReadConsoleChars(handleInfoPtr->console, - (WCHAR *)inputChars, - sizeof(inputChars) / sizeof(WCHAR), - &inputLen); - inputLen *= sizeof(WCHAR); - AcquireSRWLockExclusive(&handleInfoPtr->lock); } /* @@ -1617,6 +1573,8 @@ ConsoleReaderThread( * - remove the console from global list * - close the handle if still valid * - release the structure + * Note there is not need to check for any watchers because we only + * exit when there are no channels open to this console. */ ReleaseSRWLockExclusive(&handleInfoPtr->lock); AcquireSRWLockExclusive(&gConsoleLock); /* Modifying - exclusive lock */ @@ -1632,14 +1590,15 @@ ConsoleReaderThread( /* No need for relocking - no other thread should have access to it now */ RingBufferClear(&handleInfoPtr->buffer); - if (handleInfoPtr->console) { + if (handleInfoPtr->console + && handleInfoPtr->lastError != ERROR_INVALID_HANDLE) { SetConsoleMode(handleInfoPtr->console, handleInfoPtr->initMode); + /* + * NOTE: we do not call CloseHandle(handleInfoPtr->console) + * As per the GetStdHandle documentation, it need not be closed. + * TODO - what about when application closes and re-opens? - Test + */ } - /* - * NOTE: we do not call CloseHandle(handleInfoPtr->console) - * As per the GetStdHandle documentation, it need not be closed. - * TODO - what about when application closes and re-opens? - Test - */ ckfree(handleInfoPtr); @@ -1669,8 +1628,13 @@ ConsoleWriterThread(LPVOID arg) ConsoleHandleInfo **iterator; ConsoleChannelInfo *chanInfoPtr = NULL; BOOL success; - char buffer[4000]; - RingSizeT length; + RingSizeT numBytes; + /* + * This buffer size has no relation really with the size of the shared + * buffer. Could be bigger or smaller. Make larger as multiple threads + * could potentially be writing to it. + */ + char buffer[2*CONSOLE_BUFFER_SIZE]; /* * Keep looping until one of the following happens. @@ -1698,9 +1662,9 @@ ConsoleWriterThread(LPVOID arg) * WCHAR's, i.e. even number of chars so do some length checks up * front. */ - length = RingBufferLength(&handleInfoPtr->buffer); - length &= ~1; /* Copy integral number of WCHARs -> even number of bytes */ - if (length == 0) { + numBytes = RingBufferLength(&handleInfoPtr->buffer); + numBytes &= ~1; /* Copy integral number of WCHARs -> even number of bytes */ + if (numBytes == 0) { /* No data to write */ if (handleInfoPtr->numRefs == 1) { /* @@ -1724,20 +1688,23 @@ ConsoleWriterThread(LPVOID arg) } /* We have data to write */ - if (length > (sizeof(buffer) / sizeof(buffer[0]))) { - length = sizeof(buffer); + if (numBytes > (sizeof(buffer) / sizeof(buffer[0]))) { + numBytes = sizeof(buffer); } /* No need to check result, we already checked length bytes available */ - RingBufferOut(&handleInfoPtr->buffer, buffer, length, 0); + RingBufferOut(&handleInfoPtr->buffer, buffer, numBytes, 0); + consoleHandle = handleInfoPtr->console; WakeConditionVariable(&handleInfoPtr->interpThreadCV); ReleaseSRWLockExclusive(&handleInfoPtr->lock); offset = 0; - while (length > 0) { - RingSizeT numWChars = length / sizeof(WCHAR); + while (numBytes > 0) { + RingSizeT numWChars = numBytes / sizeof(WCHAR); DWORD status; - status = WriteConsoleChars( - handleInfoPtr->console, (WCHAR *) (offset + buffer) , numWChars, &numWChars); + status = WriteConsoleChars(handleInfoPtr->console, + (WCHAR *)(offset + buffer), + numWChars, + &numWChars); if (status != 0) { /* Only overwrite if no previous error */ if (handleInfoPtr->lastError == 0) { @@ -1749,33 +1716,19 @@ ConsoleWriterThread(LPVOID arg) */ break; } - length -= numWChars * sizeof(WCHAR); + numBytes -= numWChars * sizeof(WCHAR); offset += numWChars * sizeof(WCHAR); } + /* Wake up any threads waiting synchronously. */ + WakeConditionVariable(&handleInfoPtr->interpThreadCV); /* * Wake up all channels registered for file events. Note in - * order to follow the locking hierarchy, we need to release - * handleInfoPtr->lock before acquiring gConsoleLock and - * relock it. + * order to follow the locking hierarchy, we cannot hold any locks + * when calling NudgeWatchers. */ - /* Wake up any threads waiting synchronously. */ - WakeConditionVariable(&handleInfoPtr->interpThreadCV); - AcquireSRWLockShared(&gConsoleLock); /* Shared-read lock */ - consoleHandle = handleInfoPtr->console; - for (chanInfoPtr = gWatchingChannelList; chanInfoPtr; - chanInfoPtr = chanInfoPtr->nextWatchingChannelPtr) { - /* - * Notify channels interested in our handle AND that have - * a thread attached. - * No lock needed for chanInfoPtr. See ConsoleChannelInfo. - */ - if (chanInfoPtr->handle == consoleHandle - && chanInfoPtr->threadId != NULL) { - Tcl_ThreadAlert(chanInfoPtr->threadId); - } - } - ReleaseSRWLockShared(&gConsoleLock); + NudgeWatchers(consoleHandle); + AcquireSRWLockExclusive(&handleInfoPtr->lock); } |