diff options
Diffstat (limited to 'win/tclWinPort.h')
| -rw-r--r-- | win/tclWinPort.h | 287 |
1 files changed, 179 insertions, 108 deletions
diff --git a/win/tclWinPort.h b/win/tclWinPort.h index ee29a1a..d94bfda 100644 --- a/win/tclWinPort.h +++ b/win/tclWinPort.h @@ -19,6 +19,19 @@ # define _USE_32BIT_TIME_T #endif +/* + * We must specify the lower version we intend to support. + * + * WINVER = 0x0500 means Windows 2000 and above + */ + +#ifndef WINVER +# define WINVER 0x0501 +#endif +#ifndef _WIN32_WINNT +# define _WIN32_WINNT 0x0501 +#endif + #define WIN32_LEAN_AND_MEAN #include <windows.h> #undef WIN32_LEAN_AND_MEAN @@ -28,6 +41,10 @@ */ #define INCL_WINSOCK_API_TYPEDEFS 1 #include <winsock2.h> +#include <ws2tcpip.h> +#ifdef HAVE_WSPIAPI_H +# include <wspiapi.h> +#endif #ifdef CHECK_UNICODE_CALLS # define _UNICODE @@ -39,31 +56,41 @@ #endif /* CHECK_UNICODE_CALLS */ /* + * Pull in the typedef of TCHAR for windows. + */ +#include <tchar.h> +#ifndef _TCHAR_DEFINED + /* Borland seems to forget to set this. */ + typedef _TCHAR TCHAR; +# define _TCHAR_DEFINED +#endif +#if defined(_MSC_VER) && defined(__STDC__) + /* VS2005 SP1 misses this. See [Bug #3110161] */ + typedef _TCHAR TCHAR; +#endif + +/* *--------------------------------------------------------------------------- * The following sets of #includes and #ifdefs are required to get Tcl to * compile under the windows compilers. *--------------------------------------------------------------------------- */ -#ifdef __CYGWIN__ -# include <unistd.h> -# include <wchar.h> -#else -# include <io.h> -#endif -#include <stdio.h> -#include <stdlib.h> +#include <wchar.h> +#include <io.h> #include <errno.h> #include <fcntl.h> #include <float.h> #include <malloc.h> #include <process.h> #include <signal.h> -#include <string.h> #include <limits.h> #ifdef __CYGWIN__ # include <unistd.h> +# ifndef _vsnprintf +# define _vsnprintf vsnprintf +# endif # ifndef _wcsicmp # define _wcsicmp wcscasecmp # endif @@ -94,20 +121,6 @@ #include <time.h> /* - * Define EINPROGRESS in terms of WSAEINPROGRESS. - */ - -#undef EINPROGRESS -#define EINPROGRESS WSAEINPROGRESS - -/* - * Define ENOTSUP to a value that will never occur. - */ - -#undef ENOTSUP -#define ENOTSUP -1030507 - -/* * cygwin does not have this struct. */ #ifdef __CYGWIN__ @@ -126,95 +139,159 @@ }; #endif -/* Those codes, from Visual Studio 2010, conflict with other values */ -#undef ENODATA -#undef ENOMSG -#undef ENOSR -#undef ENOSTR -#undef EPROTO - /* * The following defines redefine the Windows Socket errors as * BSD errors so Tcl_PosixError can do the right thing. */ -#undef EWOULDBLOCK -#define EWOULDBLOCK EAGAIN -#undef EALREADY -#define EALREADY 149 /* operation already in progress */ -#undef ENOTSOCK -#define ENOTSOCK 95 /* Socket operation on non-socket */ -#undef EDESTADDRREQ -#define EDESTADDRREQ 96 /* Destination address required */ -#undef EMSGSIZE -#define EMSGSIZE 97 /* Message too long */ -#undef EPROTOTYPE -#define EPROTOTYPE 98 /* Protocol wrong type for socket */ -#undef ENOPROTOOPT -#define ENOPROTOOPT 99 /* Protocol not available */ -#undef EPROTONOSUPPORT -#define EPROTONOSUPPORT 120 /* Protocol not supported */ +#ifndef ENOTEMPTY +# define ENOTEMPTY 41 /* Directory not empty */ +#endif +#ifndef EREMOTE +# define EREMOTE 66 /* The object is remote */ +#endif +#ifndef EPFNOSUPPORT +# define EPFNOSUPPORT 96 /* Protocol family not supported */ +#endif +#ifndef EADDRINUSE +# define EADDRINUSE 100 /* Address already in use */ +#endif +#ifndef EADDRNOTAVAIL +# define EADDRNOTAVAIL 101 /* Can't assign requested address */ +#endif +#ifndef EAFNOSUPPORT +# define EAFNOSUPPORT 102 /* Address family not supported */ +#endif +#ifndef EALREADY +# define EALREADY 103 /* Operation already in progress */ +#endif +#ifndef EBADMSG +# define EBADMSG 104 /* Not a data message */ +#endif +#ifndef ECANCELED +# define ECANCELED 105 /* Canceled */ +#endif +#ifndef ECONNABORTED +# define ECONNABORTED 106 /* Software caused connection abort */ +#endif +#ifndef ECONNREFUSED +# define ECONNREFUSED 107 /* Connection refused */ +#endif +#ifndef ECONNRESET +# define ECONNRESET 108 /* Connection reset by peer */ +#endif +#ifndef EDESTADDRREQ +# define EDESTADDRREQ 109 /* Destination address required */ +#endif +#ifndef EHOSTUNREACH +# define EHOSTUNREACH 110 /* No route to host */ +#endif +#ifndef EIDRM +# define EIDRM 111 /* Identifier removed */ +#endif +#ifndef EINPROGRESS +# define EINPROGRESS 112 /* Operation now in progress */ +#endif +#ifndef EISCONN +# define EISCONN 113 /* Socket is already connected */ +#endif +#ifndef ELOOP +# define ELOOP 114 /* Symbolic link loop */ +#endif +#ifndef EMSGSIZE +# define EMSGSIZE 115 /* Message too long */ +#endif +#ifndef ENETDOWN +# define ENETDOWN 116 /* Network is down */ +#endif +#ifndef ENETRESET +# define ENETRESET 117 /* Network dropped connection on reset */ +#endif +#ifndef ENETUNREACH +# define ENETUNREACH 118 /* Network is unreachable */ +#endif +#ifndef ENOBUFS +# define ENOBUFS 119 /* No buffer space available */ +#endif +#ifndef ENODATA +# define ENODATA 120 /* No data available */ +#endif +#ifndef ENOLINK +# define ENOLINK 121 /* Link has be severed */ +#endif +#ifndef ENOMSG +# define ENOMSG 122 /* No message of desired type */ +#endif +#ifndef ENOPROTOOPT +# define ENOPROTOOPT 123 /* Protocol not available */ +#endif +#ifndef ENOSR +# define ENOSR 124 /* Out of stream resources */ +#endif +#ifndef ENOSTR +# define ENOSTR 125 /* Not a stream device */ +#endif +#ifndef ENOTCONN +# define ENOTCONN 126 /* Socket is not connected */ +#endif +#ifndef ENOTRECOVERABLE +# define ENOTRECOVERABLE 127 /* Not recoverable */ +#endif +#ifndef ENOTSOCK +# define ENOTSOCK 128 /* Socket operation on non-socket */ +#endif +#ifndef ENOTSUP +# define ENOTSUP 129 /* Operation not supported */ +#endif +#ifndef EOPNOTSUPP +# define EOPNOTSUPP 130 /* Operation not supported on socket */ +#endif +#ifndef EOTHER +# define EOTHER 131 /* Other error */ +#endif +/* workaround for mingw-w64 bug 3407992 */ +#undef EOVERFLOW +#define EOVERFLOW 132 /* File too big */ +#ifndef EOWNERDEAD +# define EOWNERDEAD 133 /* Owner dead */ +#endif +#ifndef EPROTO +# define EPROTO 134 /* Protocol error */ +#endif +#ifndef EPROTONOSUPPORT +# define EPROTONOSUPPORT 135 /* Protocol not supported */ +#endif +#ifndef EPROTOTYPE +# define EPROTOTYPE 136 /* Protocol wrong type for socket */ +#endif +#ifndef ETIME +# define ETIME 137 /* Timer expired */ +#endif +#ifndef ETIMEDOUT +# define ETIMEDOUT 138 /* Connection timed out */ +#endif +#ifndef ETXTBSY +# define ETXTBSY 139 /* Text file or pseudo-device busy */ +#endif +#ifndef EWOULDBLOCK +# define EWOULDBLOCK 140 /* Operation would block */ +#endif + + #undef ESOCKTNOSUPPORT -#define ESOCKTNOSUPPORT 121 /* Socket type not supported */ -#undef EOPNOTSUPP -#define EOPNOTSUPP 122 /* Operation not supported on socket */ -#undef EPFNOSUPPORT -#define EPFNOSUPPORT 123 /* Protocol family not supported */ -#undef EAFNOSUPPORT -#define EAFNOSUPPORT 124 /* Address family not supported */ -#undef EADDRINUSE -#define EADDRINUSE 125 /* Address already in use */ -#undef EADDRNOTAVAIL -#define EADDRNOTAVAIL 126 /* Can't assign requested address */ -#undef ENETDOWN -#define ENETDOWN 127 /* Network is down */ -#undef ENETUNREACH -#define ENETUNREACH 128 /* Network is unreachable */ -#undef ENETRESET -#define ENETRESET 129 /* Network dropped connection on reset */ -#undef ECONNABORTED -#define ECONNABORTED 130 /* Software caused connection abort */ -#undef ECONNRESET -#define ECONNRESET 131 /* Connection reset by peer */ -#undef ENOBUFS -#define ENOBUFS 132 /* No buffer space available */ -#undef EISCONN -#define EISCONN 133 /* Socket is already connected */ -#undef ENOTCONN -#define ENOTCONN 134 /* Socket is not connected */ +#define ESOCKTNOSUPPORT WSAESOCKTNOSUPPORT /* Socket type not supported */ #undef ESHUTDOWN -#define ESHUTDOWN 143 /* Can't send after socket shutdown */ +#define ESHUTDOWN WSAESHUTDOWN /* Can't send after socket shutdown */ #undef ETOOMANYREFS -#define ETOOMANYREFS 144 /* Too many references: can't splice */ -#undef ETIMEDOUT -#define ETIMEDOUT 145 /* Connection timed out */ -#undef ECONNREFUSED -#define ECONNREFUSED 146 /* Connection refused */ -#undef ELOOP -#define ELOOP 90 /* Symbolic link loop */ +#define ETOOMANYREFS WSAETOOMANYREFS /* Too many references: can't splice */ #undef EHOSTDOWN -#define EHOSTDOWN 147 /* Host is down */ -#undef EHOSTUNREACH -#define EHOSTUNREACH 148 /* No route to host */ -#undef ENOTEMPTY -#define ENOTEMPTY 93 /* directory not empty */ +#define EHOSTDOWN WSAEHOSTDOWN /* Host is down */ #undef EUSERS -#define EUSERS 94 /* Too many users (for UFS) */ +#define EUSERS WSAEUSERS /* Too many users (for UFS) */ #undef EDQUOT -#define EDQUOT 69 /* Disc quota exceeded */ +#define EDQUOT WSAEDQUOT /* Disc quota exceeded */ #undef ESTALE -#define ESTALE 151 /* Stale NFS file handle */ -#undef EREMOTE -#define EREMOTE 66 /* The object is remote */ - -/* - * It is very hard to determine how Windows reacts to attempting to - * set a file pointer outside the input datatype's representable - * region. So we fake the error code ourselves. - */ - -#undef EOVERFLOW -#define EOVERFLOW EFBIG /* The object couldn't fit in the datatype */ +#define ESTALE WSAESTALE /* Stale NFS file handle */ /* * Signals not known to the standard ANSI signal.h. These are used @@ -376,9 +453,9 @@ #if defined(_MSC_VER) || defined(__MINGW32__) # define environ _environ -# if defined(_MSC_VER) && (_MSC_VER < 1600) +# if defined(_MSC_VER) && (_MSC_VER < 1600) # define hypot _hypot -# endif +# endif # define exception _exception # undef EDEADLOCK # if defined(__MINGW32__) && !defined(__MSVCRT__) @@ -418,12 +495,6 @@ /* - * There is no platform-specific panic routine for Windows in the Tcl internals. - */ - -#define TclpPanic ((Tcl_PanicProc *) NULL) - -/* *--------------------------------------------------------------------------- * The following macros and declarations represent the interface between * generic and windows-specific parts of Tcl. Some of the macros may |