diff options
Diffstat (limited to 'win/tclWinPort.h')
| -rw-r--r-- | win/tclWinPort.h | 294 |
1 files changed, 107 insertions, 187 deletions
diff --git a/win/tclWinPort.h b/win/tclWinPort.h index ca6b2bf..b2bf1d7 100644 --- a/win/tclWinPort.h +++ b/win/tclWinPort.h @@ -14,24 +14,11 @@ #ifndef _TCLWINPORT #define _TCLWINPORT -#if !defined(_WIN64) && defined(BUILD_tcl) +#ifndef _WIN64 /* See [Bug 3354324]: file mtime sets wrong time */ # define _USE_32BIT_TIME_T #endif -/* - * We must specify the lower version we intend to support. - * - * WINVER = 0x0500 means Windows 2000 and above - */ - -#ifndef WINVER -# define WINVER 0x0501 -#endif -#ifndef _WIN32_WINNT -# define _WIN32_WINNT 0x0501 -#endif - #define WIN32_LEAN_AND_MEAN #include <windows.h> #undef WIN32_LEAN_AND_MEAN @@ -47,10 +34,6 @@ typedef DWORD_PTR * PDWORD_PTR; */ #define INCL_WINSOCK_API_TYPEDEFS 1 #include <winsock2.h> -#include <ws2tcpip.h> -#ifdef HAVE_WSPIAPI_H -# include <wspiapi.h> -#endif #ifdef CHECK_UNICODE_CALLS # define _UNICODE @@ -62,20 +45,6 @@ typedef DWORD_PTR * PDWORD_PTR; #endif /* CHECK_UNICODE_CALLS */ /* - * Pull in the typedef of TCHAR for windows. - */ -#include <tchar.h> -#ifndef _TCHAR_DEFINED - /* Borland seems to forget to set this. */ - typedef _TCHAR TCHAR; -# define _TCHAR_DEFINED -#endif -#if defined(_MSC_VER) && defined(__STDC__) - /* VS2005 SP1 misses this. See [Bug #3110161] */ - typedef _TCHAR TCHAR; -#endif - -/* *--------------------------------------------------------------------------- * The following sets of #includes and #ifdefs are required to get Tcl to * compile under the windows compilers. @@ -83,14 +52,16 @@ typedef DWORD_PTR * PDWORD_PTR; */ #include <time.h> -#include <wchar.h> #include <io.h> +#include <stdio.h> +#include <stdlib.h> #include <errno.h> #include <fcntl.h> #include <float.h> #include <malloc.h> #include <process.h> #include <signal.h> +#include <string.h> #include <limits.h> #ifndef __GNUC__ @@ -114,166 +85,108 @@ typedef DWORD_PTR * PDWORD_PTR; #endif /* __MWERKS__ */ /* + * Define EINPROGRESS in terms of WSAEINPROGRESS. + */ + +#undef EINPROGRESS +#define EINPROGRESS WSAEINPROGRESS + +/* + * Define ENOTSUP to a value that will never occur. + */ + +#undef ENOTSUP +#define ENOTSUP -1030507 + +/* Those codes, from Visual Studio 2010, conflict with other values */ +#undef ENODATA +#undef ENOMSG +#undef ENOSR +#undef ENOSTR +#undef EPROTO + +/* * The following defines redefine the Windows Socket errors as * BSD errors so Tcl_PosixError can do the right thing. */ -#ifndef ENOTEMPTY -# define ENOTEMPTY 41 /* Directory not empty */ -#endif -#ifndef EREMOTE -# define EREMOTE 66 /* The object is remote */ -#endif -#ifndef EPFNOSUPPORT -# define EPFNOSUPPORT 96 /* Protocol family not supported */ -#endif -#ifndef EADDRINUSE -# define EADDRINUSE 100 /* Address already in use */ -#endif -#ifndef EADDRNOTAVAIL -# define EADDRNOTAVAIL 101 /* Can't assign requested address */ -#endif -#ifndef EAFNOSUPPORT -# define EAFNOSUPPORT 102 /* Address family not supported */ -#endif -#ifndef EALREADY -# define EALREADY 103 /* Operation already in progress */ -#endif -#ifndef EBADMSG -# define EBADMSG 104 /* Not a data message */ -#endif -#ifndef ECANCELED -# define ECANCELED 105 /* Canceled */ -#endif -#ifndef ECONNABORTED -# define ECONNABORTED 106 /* Software caused connection abort */ -#endif -#ifndef ECONNREFUSED -# define ECONNREFUSED 107 /* Connection refused */ -#endif -#ifndef ECONNRESET -# define ECONNRESET 108 /* Connection reset by peer */ -#endif -#ifndef EDESTADDRREQ -# define EDESTADDRREQ 109 /* Destination address required */ -#endif -#ifndef EHOSTUNREACH -# define EHOSTUNREACH 110 /* No route to host */ -#endif -#ifndef EIDRM -# define EIDRM 111 /* Identifier removed */ -#endif -#ifndef EINPROGRESS -# define EINPROGRESS 112 /* Operation now in progress */ -#endif -#ifndef EISCONN -# define EISCONN 113 /* Socket is already connected */ -#endif -#ifndef ELOOP -# define ELOOP 114 /* Symbolic link loop */ -#endif -#ifndef EMSGSIZE -# define EMSGSIZE 115 /* Message too long */ -#endif -#ifndef ENETDOWN -# define ENETDOWN 116 /* Network is down */ -#endif -#ifndef ENETRESET -# define ENETRESET 117 /* Network dropped connection on reset */ -#endif -#ifndef ENETUNREACH -# define ENETUNREACH 118 /* Network is unreachable */ -#endif -#ifndef ENOBUFS -# define ENOBUFS 119 /* No buffer space available */ -#endif -#ifndef ENODATA -# define ENODATA 120 /* No data available */ -#endif -#ifndef ENOLINK -# define ENOLINK 121 /* Link has be severed */ -#endif -#ifndef ENOMSG -# define ENOMSG 122 /* No message of desired type */ -#endif -#ifndef ENOPROTOOPT -# define ENOPROTOOPT 123 /* Protocol not available */ -#endif -#ifndef ENOSR -# define ENOSR 124 /* Out of stream resources */ -#endif -#ifndef ENOSTR -# define ENOSTR 125 /* Not a stream device */ -#endif -#ifndef ENOTCONN -# define ENOTCONN 126 /* Socket is not connected */ -#endif -#ifndef ENOTRECOVERABLE -# define ENOTRECOVERABLE 127 /* Not recoverable */ -#endif -#ifndef ENOTSOCK -# define ENOTSOCK 128 /* Socket operation on non-socket */ -#endif -#ifndef ENOTSUP -# define ENOTSUP 129 /* Operation not supported */ -#endif -#ifndef EOPNOTSUPP -# define EOPNOTSUPP 130 /* Operation not supported on socket */ -#endif -#ifndef EOTHER -# define EOTHER 131 /* Other error */ -#endif -#ifndef EOVERFLOW -# define EOVERFLOW 132 /* File too big */ -#endif -#ifndef EOWNERDEAD -# define EOWNERDEAD 133 /* Owner dead */ -#endif -#ifndef EPROTO -# define EPROTO 134 /* Protocol error */ -#endif -#ifndef EPROTONOSUPPORT -# define EPROTONOSUPPORT 135 /* Protocol not supported */ -#endif -#ifndef EPROTOTYPE -# define EPROTOTYPE 136 /* Protocol wrong type for socket */ -#endif -#ifndef ETIME -# define ETIME 137 /* Timer expired */ -#endif -#ifndef ETIMEDOUT -# define ETIMEDOUT 138 /* Connection timed out */ -#endif -#ifndef ETXTBSY -# define ETXTBSY 139 /* Text file or pseudo-device busy */ -#endif -#ifndef EWOULDBLOCK -# define EWOULDBLOCK 140 /* Operation would block */ -#endif +#undef EWOULDBLOCK +#define EWOULDBLOCK EAGAIN +#undef EALREADY +#define EALREADY 149 /* operation already in progress */ +#undef ENOTSOCK +#define ENOTSOCK 95 /* Socket operation on non-socket */ +#undef EDESTADDRREQ +#define EDESTADDRREQ 96 /* Destination address required */ +#undef EMSGSIZE +#define EMSGSIZE 97 /* Message too long */ +#undef EPROTOTYPE +#define EPROTOTYPE 98 /* Protocol wrong type for socket */ +#undef ENOPROTOOPT +#define ENOPROTOOPT 99 /* Protocol not available */ +#undef EPROTONOSUPPORT +#define EPROTONOSUPPORT 120 /* Protocol not supported */ +#undef ESOCKTNOSUPPORT +#define ESOCKTNOSUPPORT 121 /* Socket type not supported */ +#undef EOPNOTSUPP +#define EOPNOTSUPP 122 /* Operation not supported on socket */ +#undef EPFNOSUPPORT +#define EPFNOSUPPORT 123 /* Protocol family not supported */ +#undef EAFNOSUPPORT +#define EAFNOSUPPORT 124 /* Address family not supported */ +#undef EADDRINUSE +#define EADDRINUSE 125 /* Address already in use */ +#undef EADDRNOTAVAIL +#define EADDRNOTAVAIL 126 /* Can't assign requested address */ +#undef ENETDOWN +#define ENETDOWN 127 /* Network is down */ +#undef ENETUNREACH +#define ENETUNREACH 128 /* Network is unreachable */ +#undef ENETRESET +#define ENETRESET 129 /* Network dropped connection on reset */ +#undef ECONNABORTED +#define ECONNABORTED 130 /* Software caused connection abort */ +#undef ECONNRESET +#define ECONNRESET 131 /* Connection reset by peer */ +#undef ENOBUFS +#define ENOBUFS 132 /* No buffer space available */ +#undef EISCONN +#define EISCONN 133 /* Socket is already connected */ +#undef ENOTCONN +#define ENOTCONN 134 /* Socket is not connected */ +#undef ESHUTDOWN +#define ESHUTDOWN 143 /* Can't send after socket shutdown */ +#undef ETOOMANYREFS +#define ETOOMANYREFS 144 /* Too many references: can't splice */ +#undef ETIMEDOUT +#define ETIMEDOUT 145 /* Connection timed out */ +#undef ECONNREFUSED +#define ECONNREFUSED 146 /* Connection refused */ +#undef ELOOP +#define ELOOP 90 /* Symbolic link loop */ +#undef EHOSTDOWN +#define EHOSTDOWN 147 /* Host is down */ +#undef EHOSTUNREACH +#define EHOSTUNREACH 148 /* No route to host */ +#undef ENOTEMPTY +#define ENOTEMPTY 93 /* directory not empty */ +#undef EUSERS +#define EUSERS 94 /* Too many users (for UFS) */ +#undef EDQUOT +#define EDQUOT 69 /* Disc quota exceeded */ +#undef ESTALE +#define ESTALE 151 /* Stale NFS file handle */ +#undef EREMOTE +#define EREMOTE 66 /* The object is remote */ +/* + * It is very hard to determine how Windows reacts to attempting to + * set a file pointer outside the input datatype's representable + * region. So we fake the error code ourselves. + */ -/* Visual Studio doesn't have these, so just choose some high numbers */ -#ifndef ESOCKTNOSUPPORT -# define ESOCKTNOSUPPORT 240 /* Socket type not supported */ -#endif -#ifndef ESHUTDOWN -# define ESHUTDOWN 241 /* Can't send after socket shutdown */ -#endif -#ifndef ETOOMANYREFS -# define ETOOMANYREFS 242 /* Too many references: can't splice */ -#endif -#ifndef EHOSTDOWN -# define EHOSTDOWN 243 /* Host is down */ -#endif -#ifndef EUSERS -# define EUSERS 244 /* Too many users (for UFS) */ -#endif -#ifndef EDQUOT -# define EDQUOT 245 /* Disc quota exceeded */ -#endif -#ifndef ESTALE -# define ESTALE 246 /* Stale NFS file handle */ -#endif +#undef EOVERFLOW +#define EOVERFLOW EFBIG /* The object couldn't fit in the datatype */ /* * Signals not known to the standard ANSI signal.h. These are used @@ -472,6 +385,13 @@ typedef DWORD_PTR * PDWORD_PTR; # pragma warning(disable:4996) #endif + +/* + * There is no platform-specific panic routine for Windows in the Tcl internals. + */ + +#define TclpPanic ((Tcl_PanicProc *) NULL) + /* *--------------------------------------------------------------------------- * The following macros and declarations represent the interface between |