diff options
Diffstat (limited to 'win')
| -rw-r--r-- | win/Makefile.in | 18 | ||||
| -rw-r--r-- | win/makefile.bc | 11 | ||||
| -rw-r--r-- | win/makefile.vc | 21 | ||||
| -rw-r--r-- | win/stub16.c | 197 | ||||
| -rw-r--r-- | win/tcl.dsp | 4 | ||||
| -rw-r--r-- | win/tclWinPipe.c | 82 |
6 files changed, 14 insertions, 319 deletions
diff --git a/win/Makefile.in b/win/Makefile.in index 61d9f07..f91fb14 100644 --- a/win/Makefile.in +++ b/win/Makefile.in @@ -4,7 +4,7 @@ # "./configure", which is a configuration script generated by the "autoconf" # program (constructs like "@foo@" will get replaced in the actual Makefile. # -# RCS: @(#) $Id: Makefile.in,v 1.181 2010/08/04 19:23:12 hobbs Exp $ +# RCS: @(#) $Id: Makefile.in,v 1.182 2010/08/04 21:37:18 hobbs Exp $ VERSION = @TCL_VERSION@ @@ -136,10 +136,9 @@ REG_DLL_FILE = tclreg$(REGVER)${DLLSUFFIX} REG_LIB_FILE = @LIBPREFIX@tclreg$(REGVER)${LIBSUFFIX} TEST_DLL_FILE = tcltest$(VER)${DLLSUFFIX} TEST_LIB_FILE = @LIBPREFIX@tcltest$(VER)${LIBSUFFIX} -PIPE_DLL_FILE = tclpip$(VER)${DLLSUFFIX} ZLIB_DLL_FILE = zlib1.dll -SHARED_LIBRARIES = $(TCL_DLL_FILE) $(PIPE_DLL_FILE) @ZLIB_DLL_FILE@ +SHARED_LIBRARIES = $(TCL_DLL_FILE) @ZLIB_DLL_FILE@ STATIC_LIBRARIES = $(TCL_LIB_FILE) $(REG_LIB_FILE) $(DDE_LIB_FILE) # TCL_EXE is the name of a tclsh executable that is available *BEFORE* running @@ -370,8 +369,6 @@ WIN_OBJS = \ tclWinThrd.$(OBJEXT) \ tclWinTime.$(OBJEXT) -PIPE_OBJS = stub16.$(OBJEXT) - DDE_OBJS = tclWinDde.$(OBJEXT) REG_OBJS = tclWinReg.$(OBJEXT) @@ -481,12 +478,6 @@ ${TEST_DLL_FILE}: ${TCLTEST_OBJS} ${TCL_STUB_LIB_FILE} ${ZLIB_DLL_FILE}: $(ZLIB_DIR)/win32/${ZLIB_DLL_FILE} @$(COPY) $(ZLIB_DIR)/win32/${ZLIB_DLL_FILE} ${ZLIB_DLL_FILE} -# PIPE_DLL_FILE is actually an executable, don't build it like a DLL. - -${PIPE_DLL_FILE}: ${PIPE_OBJS} - @$(RM) ${PIPE_DLL_FILE} - @MAKE_EXE@ $(CFLAGS) ${PIPE_OBJS} $(LIBS) $(LDFLAGS_CONSOLE) - # Add the object extension to the implicit rules. By default .obj is not # automatically added. @@ -500,8 +491,7 @@ tclWinInit.${OBJEXT}: tclWinInit.c $(CC) -c $(CC_SWITCHES) -DBUILD_tcl $(EXTFLAGS) @DEPARG@ $(CC_OBJNAME) tclWinPipe.${OBJEXT}: tclWinPipe.c - $(CC) -c $(CC_SWITCHES) -DBUILD_tcl -DTCL_PIPE_DLL=\"$(PIPE_DLL_FILE)\" \ - $(EXTFLAGS) @DEPARG@ $(CC_OBJNAME) + $(CC) -c $(CC_SWITCHES) -DBUILD_tcl $(EXTFLAGS) @DEPARG@ $(CC_OBJNAME) testMain.${OBJEXT}: tclAppInit.c $(CC) -c $(CC_SWITCHES) -DTCL_TEST @DEPARG@ $(CC_OBJNAME) @@ -590,7 +580,7 @@ install-binaries: binaries else true; \ fi; \ done; - @for i in $(TCL_DLL_FILE) $(ZLIB_DLL_FILE) $(TCLSH) $(PIPE_DLL_FILE); \ + @for i in $(TCL_DLL_FILE) $(ZLIB_DLL_FILE) $(TCLSH); \ do \ if [ -f $$i ]; then \ echo "Installing $$i to $(BIN_INSTALL_DIR)/"; \ diff --git a/win/makefile.bc b/win/makefile.bc index c339527..12ba603 100644 --- a/win/makefile.bc +++ b/win/makefile.bc @@ -159,8 +159,6 @@ TCLPLUGINDLLNAME = $(NAMEPREFIX)$(VERSION)p$(DBGX).dll TCLPLUGINDLL = $(OUTDIR)\$(TCLPLUGINDLLNAME) TCLSH = $(OUTDIR)\$(NAMEPREFIX)sh$(VERSION)$(DBGX).exe TCLSHP = $(OUTDIR)\$(NAMEPREFIX)shp$(VERSION)$(DBGX).exe -TCLPIPEDLLNAME = $(NAMEPREFIX)pip$(VERSION)$(DBGX).dll -TCLPIPEDLL = $(OUTDIR)\$(TCLPIPEDLLNAME) TCLREGDLLNAME = $(NAMEPREFIX)reg$(REGVERSION)$(DBGX).dll TCLREGDLL = $(OUTDIR)\$(TCLREGDLLNAME) TCLDDEDLLNAME = $(NAMEPREFIX)dde$(DDEVERSION)$(DBGX).dll @@ -342,7 +340,7 @@ LNLIBS = import32 cw32mt ###################################################################### release: setup $(TCLSH) dlls -dlls: setup $(TCLPIPEDLL) $(TCLREGDLL) $(TCLDDEDLL) +dlls: setup $(TCLREGDLL) $(TCLDDEDLL) all: setup $(TCLSH) dlls $(CAT32) tcltest: setup $(TCLTEST) dlls $(CAT32) plugin: setup $(TCLPLUGINDLL) $(TCLSHP) @@ -391,11 +389,6 @@ $(TCLTEST): $(TCLTESTOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res $(TCLTESTOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res ! -$(TCLPIPEDLL): $(WINDIR)\stub16.c - $(cc32) $(CFLAGS) -o$(TMPDIR)\stub16.obj $(WINDIR)\stub16.c - $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \ - $(TMPDIR)\stub16.obj, $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res - $(TCLDDEDLL): $(TMPDIR)\tclWinDde.obj $(TCLSTUBLIB) $(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \ $(TMPDIR)\tclWinDde.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \ @@ -419,8 +412,6 @@ install-binaries: $(TCLSH) @copy "$(TCLLIB)" "$(LIB_INSTALL_DIR)" @echo installing "$(TCLSH)" @copy "$(TCLSH)" "$(BIN_INSTALL_DIR)" - @echo installing $(TCLPIPEDLLNAME) - @copy "$(TCLPIPEDLL)" "$(BIN_INSTALL_DIR)" @echo installing $(TCLSTUBLIBNAME) @copy "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)" @echo installing $(WINDIR)\tclooConfig.sh diff --git a/win/makefile.vc b/win/makefile.vc index 189a03f..93db8bf 100644 --- a/win/makefile.vc +++ b/win/makefile.vc @@ -13,7 +13,7 @@ # Copyright (c) 2003-2008 Pat Thoyts. # #------------------------------------------------------------------------------ -# RCS: @(#) $Id: makefile.vc,v 1.212 2010/04/05 12:45:27 dkf Exp $ +# RCS: @(#) $Id: makefile.vc,v 1.213 2010/08/04 21:37:19 hobbs Exp $ #------------------------------------------------------------------------------ # Check to see we are configured to build with MSVC (MSDEVDIR or MSVCDIR) @@ -47,8 +47,7 @@ the build instructions. # # 3) Targets are: # release -- Builds the core, the shell and the dlls. (default) -# dlls -- Just builds the windows extensions and the 16-bit DOS -# pipe/thunk helper app. +# dlls -- Just builds the windows extensions # shell -- Just builds the shell and the core. # core -- Only builds the core [tclXX.(dll|lib)]. # all -- Builds everything. @@ -208,8 +207,6 @@ TCLSTUBLIB = $(OUT_DIR)\$(TCLSTUBLIBNAME) TCLSHNAME = $(PROJECT)sh$(VERSION)$(SUFX).exe TCLSH = $(OUT_DIR)\$(TCLSHNAME) -TCLPIPEDLLNAME = $(PROJECT)pip$(VERSION)$(SUFX:t=).dll -TCLPIPEDLL = $(OUT_DIR)\$(TCLPIPEDLLNAME) TCLREGLIBNAME = $(PROJECT)reg$(REGVERSION)$(SUFX:t=).$(EXT) TCLREGLIB = $(OUT_DIR)\$(TCLREGLIBNAME) @@ -482,8 +479,7 @@ crt = -MT !endif TCL_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)" -I"$(TOMMATHDIR)" -TCL_DEFINES = -DTCL_PIPE_DLL=\"$(TCLPIPEDLLNAME)\" -DTCL_TOMMATH -DMP_PREC=4 \ - -Dinline=__inline -DHAVE_ZLIB=1 +TCL_DEFINES = -DTCL_TOMMATH -DMP_PREC=4 -Dinline=__inline -DHAVE_ZLIB=1 BASE_CFLAGS = $(cflags) $(cdebug) $(crt) $(TCL_INCLUDES) $(TCL_DEFINES) CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE TCL_CFLAGS = $(BASE_CFLAGS) $(OPTDEFINES) @@ -551,7 +547,7 @@ TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) release: setup $(TCLSH) $(TCLSTUBLIB) dlls pkgs core: setup $(TCLLIB) $(TCLSTUBLIB) shell: setup $(TCLSH) -dlls: setup $(TCLPIPEDLL) $(TCLREGLIB) $(TCLDDELIB) +dlls: setup $(TCLREGLIB) $(TCLDDELIB) all: setup $(TCLSH) $(TCLSTUBLIB) dlls $(CAT32) pkgs tcltest: setup $(TCLTEST) dlls $(CAT32) install: install-binaries install-libraries install-docs install-pkgs @@ -613,11 +609,6 @@ $(TCLTEST): $(TCLTESTOBJS) $(TCLSTUBLIB) $(TCLIMPLIB) $(link32) $(conlflags) -stack:2300000 -out:$@ $(baselibs) $** $(_VC_MANIFEST_EMBED_EXE) -$(TCLPIPEDLL): $(WINDIR)\stub16.c - $(cc32) $(CON_CFLAGS) -Fo$(TMP_DIR)\ $(WINDIR)\stub16.c - $(link32) $(conlflags) -out:$@ $(TMP_DIR)\stub16.obj $(baselibs) - $(_VC_MANIFEST_EMBED_DLL) - !if $(STATIC_BUILD) $(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj $(lib32) -nologo $(LINKERFLAGS) -out:$@ $** @@ -1059,10 +1050,6 @@ install-binaries: @echo Installing $(TCLSHNAME) @$(CPY) "$(TCLSH)" "$(BIN_INSTALL_DIR)\" !endif -!if exist($(TCLPIPEDLL)) - @echo Installing $(TCLPIPEDLLNAME) - @$(CPY) "$(TCLPIPEDLL)" "$(BIN_INSTALL_DIR)\" -!endif @echo Installing $(TCLSTUBLIBNAME) @$(CPY) "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)\" diff --git a/win/stub16.c b/win/stub16.c deleted file mode 100644 index 52460c3..0000000 --- a/win/stub16.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * stub16.c - * - * A helper program used for running 16-bit DOS applications under - * Windows 95. - * - * Copyright (c) 1996 by Sun Microsystems, Inc. - * - * See the file "license.terms" for information on usage and redistribution of - * this file, and for a DISCLAIMER OF ALL WARRANTIES. - * - * RCS: @(#) $Id: stub16.c,v 1.6 2010/03/20 12:00:41 nijtmans Exp $ - */ - -#define STRICT - -#include <windows.h> -#include <stdio.h> - -static HANDLE CreateTempFile(void); - -/* - *--------------------------------------------------------------------------- - * - * main - * - * Entry point for the 32-bit console mode app used by Windows 95 to help - * run the 16-bit program specified on the command line. - * - * 1. EOF on a pipe that connects a detached 16-bit process and a 32-bit - * process is never seen. So, this process runs the 16-bit process - * _attached_, and then it is run detached from the calling 32-bit - * process. - * - * 2. If a 16-bit process blocks reading from or writing to a pipe, it - * never wakes up, and eventually brings the whole system down with it if - * you try to kill the process. This app simulates pipes. If any of the - * stdio handles is a pipe, this program accumulates information into - * temp files and forwards it to or from the DOS application as - * appropriate. This means that this program must receive EOF from a - * stdin pipe before it will actually start the DOS app, and the DOS app - * must finish generating stdout or stderr before the data will be sent - * to the next stage of the pipe. If the stdio handles are not pipes, no - * accumulation occurs and the data is passed straight through to and - * from the DOS application. - * - * Results: - * None. - * - * Side effects: - * The child process is created and this process waits for it to - * complete. - * - *--------------------------------------------------------------------------- - */ - -int -main(void) -{ - DWORD dwRead, dwWrite; - char *cmdLine; - HANDLE hStdInput, hStdOutput, hStdError; - HANDLE hFileInput, hFileOutput, hFileError; - STARTUPINFOA si; - PROCESS_INFORMATION pi; - char buf[8192]; - DWORD result; - - hFileInput = INVALID_HANDLE_VALUE; - hFileOutput = INVALID_HANDLE_VALUE; - hFileError = INVALID_HANDLE_VALUE; - result = 1; - - /* - * Don't get command line from argc, argv, because the command line - * tokenizer will have stripped off all the escape sequences needed for - * quotes and backslashes, and then we'd have to put them all back in - * again. Get the raw command line and parse off what we want ourselves. - * The command line should be of the form: - * - * stub16.exe program arg1 arg2 ... - */ - - cmdLine = strchr(GetCommandLineA(), ' '); - if (cmdLine == NULL) { - return 1; - } - cmdLine++; - - hStdInput = GetStdHandle(STD_INPUT_HANDLE); - hStdOutput = GetStdHandle(STD_OUTPUT_HANDLE); - hStdError = GetStdHandle(STD_ERROR_HANDLE); - - if (GetFileType(hStdInput) == FILE_TYPE_PIPE) { - hFileInput = CreateTempFile(); - if (hFileInput == INVALID_HANDLE_VALUE) { - goto cleanup; - } - while (ReadFile(hStdInput, buf, sizeof(buf), &dwRead, NULL) != FALSE) { - if (dwRead == 0) { - break; - } - if (WriteFile(hFileInput, buf, dwRead, &dwWrite, NULL) == FALSE) { - goto cleanup; - } - } - SetFilePointer(hFileInput, 0, 0, FILE_BEGIN); - SetStdHandle(STD_INPUT_HANDLE, hFileInput); - } - if (GetFileType(hStdOutput) == FILE_TYPE_PIPE) { - hFileOutput = CreateTempFile(); - if (hFileOutput == INVALID_HANDLE_VALUE) { - goto cleanup; - } - SetStdHandle(STD_OUTPUT_HANDLE, hFileOutput); - } - if (GetFileType(hStdError) == FILE_TYPE_PIPE) { - hFileError = CreateTempFile(); - if (hFileError == INVALID_HANDLE_VALUE) { - goto cleanup; - } - SetStdHandle(STD_ERROR_HANDLE, hFileError); - } - - ZeroMemory(&si, sizeof(si)); - si.cb = sizeof(si); - if (CreateProcessA(NULL, cmdLine, NULL, NULL, TRUE, 0, NULL, NULL, &si, - &pi) == FALSE) { - goto cleanup; - } - - WaitForInputIdle(pi.hProcess, 5000); - WaitForSingleObject(pi.hProcess, INFINITE); - GetExitCodeProcess(pi.hProcess, &result); - CloseHandle(pi.hProcess); - CloseHandle(pi.hThread); - - if (hFileOutput != INVALID_HANDLE_VALUE) { - SetFilePointer(hFileOutput, 0, 0, FILE_BEGIN); - while (ReadFile(hFileOutput, buf, sizeof(buf), &dwRead, NULL) != FALSE) { - if (dwRead == 0) { - break; - } - if (WriteFile(hStdOutput, buf, dwRead, &dwWrite, NULL) == FALSE) { - break; - } - } - } - if (hFileError != INVALID_HANDLE_VALUE) { - SetFilePointer(hFileError, 0, 0, FILE_BEGIN); - while (ReadFile(hFileError, buf, sizeof(buf), &dwRead, NULL) != FALSE) { - if (dwRead == 0) { - break; - } - if (WriteFile(hStdError, buf, dwRead, &dwWrite, NULL) == FALSE) { - break; - } - } - } - - cleanup: - if (hFileInput != INVALID_HANDLE_VALUE) { - CloseHandle(hFileInput); - } - if (hFileOutput != INVALID_HANDLE_VALUE) { - CloseHandle(hFileOutput); - } - if (hFileError != INVALID_HANDLE_VALUE) { - CloseHandle(hFileError); - } - CloseHandle(hStdInput); - CloseHandle(hStdOutput); - CloseHandle(hStdError); - ExitProcess(result); - return 1; -} - -static HANDLE -CreateTempFile(void) -{ - char name[MAX_PATH]; - SECURITY_ATTRIBUTES sa; - - if (GetTempPathA(MAX_PATH, name) == 0) { - return INVALID_HANDLE_VALUE; - } - if (GetTempFileNameA(name, "tcl", 0, name) == 0) { - return INVALID_HANDLE_VALUE; - } - - sa.nLength = sizeof(sa); - sa.lpSecurityDescriptor = NULL; - sa.bInheritHandle = TRUE; - return CreateFileA(name, GENERIC_READ | GENERIC_WRITE, 0, &sa, - CREATE_ALWAYS, FILE_ATTRIBUTE_TEMPORARY | FILE_FLAG_DELETE_ON_CLOSE, - NULL); -} diff --git a/win/tcl.dsp b/win/tcl.dsp index b16a98d..27b4220 100644 --- a/win/tcl.dsp +++ b/win/tcl.dsp @@ -1460,10 +1460,6 @@ SOURCE=.\rules.vc # End Source File # Begin Source File -SOURCE=.\stub16.c -# End Source File -# Begin Source File - SOURCE=.\tcl.hpj.in # End Source File # Begin Source File diff --git a/win/tclWinPipe.c b/win/tclWinPipe.c index 7c19e38..4debaa4 100644 --- a/win/tclWinPipe.c +++ b/win/tclWinPipe.c @@ -9,7 +9,7 @@ * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. * - * RCS: @(#) $Id: tclWinPipe.c,v 1.79 2010/04/22 11:40:32 nijtmans Exp $ + * RCS: @(#) $Id: tclWinPipe.c,v 1.80 2010/08/04 21:37:19 hobbs Exp $ */ #include "tclWinInt.h" @@ -1142,82 +1142,10 @@ TclpCreateProcess( } if (applType == APPL_DOS) { - /* - * Under Windows 95, 16-bit DOS applications do not work well with - * pipes: - * - * 1. EOF on a pipe between a detached 16-bit DOS application and - * another application is not seen at the other end of the pipe, - * so the listening process blocks forever on reads. This inablity - * to detect EOF happens when either a 16-bit app or the 32-bit - * app is the listener. - * - * 2. If a 16-bit DOS application (detached or not) blocks when - * writing to a pipe, it will never wake up again, and it - * eventually brings the whole system down around it. - * - * The 16-bit application is run as a normal process inside of a - * hidden helper console app, and this helper may be run as a - * detached process. If any of the stdio handles is a pipe, the - * helper application accumulates information into temp files and - * forwards it to or from the DOS application as appropriate. - * This means that DOS apps must receive EOF from a stdin pipe - * before they will actually begin, and must finish generating - * stdout or stderr before the data will be sent to the next stage - * of the pipe. - * - * The helper app should be located in the same directory as the - * tcl dll. - */ - Tcl_Obj *tclExePtr, *pipeDllPtr; - const char *start, *end; - int i, fileExists; - Tcl_DString pipeDll; - - if (createFlags != 0) { - startInfo.wShowWindow = SW_HIDE; - startInfo.dwFlags |= STARTF_USESHOWWINDOW; - createFlags = CREATE_NEW_CONSOLE; - } - - Tcl_DStringInit(&pipeDll); - Tcl_DStringAppend(&pipeDll, TCL_PIPE_DLL, -1); - tclExePtr = TclGetObjNameOfExecutable(); - Tcl_IncrRefCount(tclExePtr); - start = Tcl_GetStringFromObj(tclExePtr, &i); - for (end = start + (i-1); end > start; end--) { - if (*end == '/') { - break; - } - } - if (*end != '/') { - Tcl_AppendResult(interp, "no / in executable path name \"", - start, "\"", (char *) NULL); - Tcl_DecrRefCount(tclExePtr); - Tcl_DStringFree(&pipeDll); - goto end; - } - i = (end - start) + 1; - pipeDllPtr = Tcl_NewStringObj(start, i); - Tcl_AppendToObj(pipeDllPtr, Tcl_DStringValue(&pipeDll), -1); - Tcl_IncrRefCount(pipeDllPtr); - if (Tcl_FSConvertToPathType(interp, pipeDllPtr) != TCL_OK) { - Tcl_Panic("Tcl_FSConvertToPathType failed"); - } - fileExists = (Tcl_FSAccess(pipeDllPtr, F_OK) == 0); - if (!fileExists) { - Tcl_AppendResult(interp, "Tcl pipe dll \"", - Tcl_DStringValue(&pipeDll), "\" not found", - (char *) NULL); - Tcl_DecrRefCount(tclExePtr); - Tcl_DecrRefCount(pipeDllPtr); - Tcl_DStringFree(&pipeDll); - goto end; - } - Tcl_DStringAppend(&cmdLine, Tcl_DStringValue(&pipeDll), -1); - Tcl_DecrRefCount(tclExePtr); - Tcl_DecrRefCount(pipeDllPtr); - Tcl_DStringFree(&pipeDll); + Tcl_AppendResult(interp, + "DOS application process not supported on this platform", + (char *) NULL); + goto end; } } |