From 8aa1ab62e1501d779f07a7c0df073f852b5dce4d Mon Sep 17 00:00:00 2001 From: dkf Date: Tue, 11 Jun 2013 08:19:56 +0000 Subject: Move the disassembler to its own file. --- generic/tclCompile.c | 785 ---------------------------------- generic/tclCompile.h | 18 +- generic/tclDisassemble.c | 1045 ++++++++++++++++++++++++++++++++++++++++++++++ generic/tclProc.c | 258 +----------- unix/Makefile.in | 11 +- win/Makefile.in | 1 + win/makefile.bc | 5 + win/makefile.vc | 7 +- 8 files changed, 1091 insertions(+), 1039 deletions(-) create mode 100644 generic/tclDisassemble.c diff --git a/generic/tclCompile.c b/generic/tclCompile.c index c361430..f93bbad 100644 --- a/generic/tclCompile.c +++ b/generic/tclCompile.c @@ -576,11 +576,6 @@ static void RegisterAuxDataType(const AuxDataType *typePtr); static int SetByteCodeFromAny(Tcl_Interp *interp, Tcl_Obj *objPtr); static void StartExpanding(CompileEnv *envPtr); -static int FormatInstruction(ByteCode *codePtr, - const unsigned char *pc, Tcl_Obj *bufferObj); -static void PrintSourceToObj(Tcl_Obj *appendObj, - const char *stringPtr, int maxChars); -static void UpdateStringOfInstName(Tcl_Obj *objPtr); /* * TIP #280: Helper for building the per-word line information of all compiled @@ -619,19 +614,6 @@ static const Tcl_ObjType substCodeType = { }; /* - * The structure below defines an instruction name Tcl object to allow - * reporting of inner contexts in errorstack without string allocation. - */ - -static const Tcl_ObjType tclInstNameType = { - "instname", /* name */ - NULL, /* freeIntRepProc */ - NULL, /* dupIntRepProc */ - UpdateStringOfInstName, /* updateStringProc */ - NULL, /* setFromAnyProc */ -}; - -/* * Helper macros. */ @@ -4411,773 +4393,6 @@ EncodeCmdLocMap( return p; } -#ifdef TCL_COMPILE_DEBUG -/* - *---------------------------------------------------------------------- - * - * TclPrintByteCodeObj -- - * - * This procedure prints ("disassembles") the instructions of a bytecode - * object to stdout. - * - * Results: - * None. - * - * Side effects: - * None. - * - *---------------------------------------------------------------------- - */ - -void -TclPrintByteCodeObj( - Tcl_Interp *interp, /* Used only for Tcl_GetStringFromObj. */ - Tcl_Obj *objPtr) /* The bytecode object to disassemble. */ -{ - Tcl_Obj *bufPtr = TclDisassembleByteCodeObj(objPtr); - - fprintf(stdout, "\n%s", TclGetString(bufPtr)); - Tcl_DecrRefCount(bufPtr); -} - -/* - *---------------------------------------------------------------------- - * - * TclPrintInstruction -- - * - * This procedure prints ("disassembles") one instruction from a bytecode - * object to stdout. - * - * Results: - * Returns the length in bytes of the current instruiction. - * - * Side effects: - * None. - * - *---------------------------------------------------------------------- - */ - -int -TclPrintInstruction( - ByteCode *codePtr, /* Bytecode containing the instruction. */ - const unsigned char *pc) /* Points to first byte of instruction. */ -{ - Tcl_Obj *bufferObj; - int numBytes; - - TclNewObj(bufferObj); - numBytes = FormatInstruction(codePtr, pc, bufferObj); - fprintf(stdout, "%s", TclGetString(bufferObj)); - Tcl_DecrRefCount(bufferObj); - return numBytes; -} - -/* - *---------------------------------------------------------------------- - * - * TclPrintObject -- - * - * This procedure prints up to a specified number of characters from the - * argument Tcl object's string representation to a specified file. - * - * Results: - * None. - * - * Side effects: - * Outputs characters to the specified file. - * - *---------------------------------------------------------------------- - */ - -void -TclPrintObject( - FILE *outFile, /* The file to print the source to. */ - Tcl_Obj *objPtr, /* Points to the Tcl object whose string - * representation should be printed. */ - int maxChars) /* Maximum number of chars to print. */ -{ - char *bytes; - int length; - - bytes = Tcl_GetStringFromObj(objPtr, &length); - TclPrintSource(outFile, bytes, TclMin(length, maxChars)); -} - -/* - *---------------------------------------------------------------------- - * - * TclPrintSource -- - * - * This procedure prints up to a specified number of characters from the - * argument string to a specified file. It tries to produce legible - * output by adding backslashes as necessary. - * - * Results: - * None. - * - * Side effects: - * Outputs characters to the specified file. - * - *---------------------------------------------------------------------- - */ - -void -TclPrintSource( - FILE *outFile, /* The file to print the source to. */ - const char *stringPtr, /* The string to print. */ - int maxChars) /* Maximum number of chars to print. */ -{ - Tcl_Obj *bufferObj; - - TclNewObj(bufferObj); - PrintSourceToObj(bufferObj, stringPtr, maxChars); - fprintf(outFile, "%s", TclGetString(bufferObj)); - Tcl_DecrRefCount(bufferObj); -} -#endif /* TCL_COMPILE_DEBUG */ - -/* - *---------------------------------------------------------------------- - * - * TclDisassembleByteCodeObj -- - * - * Given an object which is of bytecode type, return a disassembled - * version of the bytecode (in a new refcount 0 object). No guarantees - * are made about the details of the contents of the result. - * - *---------------------------------------------------------------------- - */ - -Tcl_Obj * -TclDisassembleByteCodeObj( - Tcl_Obj *objPtr) /* The bytecode object to disassemble. */ -{ - ByteCode *codePtr = objPtr->internalRep.twoPtrValue.ptr1; - unsigned char *codeStart, *codeLimit, *pc; - unsigned char *codeDeltaNext, *codeLengthNext; - unsigned char *srcDeltaNext, *srcLengthNext; - int codeOffset, codeLen, srcOffset, srcLen, numCmds, delta, i; - Interp *iPtr = (Interp *) *codePtr->interpHandle; - Tcl_Obj *bufferObj; - char ptrBuf1[20], ptrBuf2[20]; - - TclNewObj(bufferObj); - if (codePtr->refCount <= 0) { - return bufferObj; /* Already freed. */ - } - - codeStart = codePtr->codeStart; - codeLimit = codeStart + codePtr->numCodeBytes; - numCmds = codePtr->numCommands; - - /* - * Print header lines describing the ByteCode. - */ - - sprintf(ptrBuf1, "%p", codePtr); - sprintf(ptrBuf2, "%p", iPtr); - Tcl_AppendPrintfToObj(bufferObj, - "ByteCode 0x%s, refCt %u, epoch %u, interp 0x%s (epoch %u)\n", - ptrBuf1, codePtr->refCount, codePtr->compileEpoch, ptrBuf2, - iPtr->compileEpoch); - Tcl_AppendToObj(bufferObj, " Source ", -1); - PrintSourceToObj(bufferObj, codePtr->source, - TclMin(codePtr->numSrcBytes, 55)); - Tcl_AppendPrintfToObj(bufferObj, - "\n Cmds %d, src %d, inst %d, litObjs %u, aux %d, stkDepth %u, code/src %.2f\n", - numCmds, codePtr->numSrcBytes, codePtr->numCodeBytes, - codePtr->numLitObjects, codePtr->numAuxDataItems, - codePtr->maxStackDepth, -#ifdef TCL_COMPILE_STATS - codePtr->numSrcBytes? - codePtr->structureSize/(float)codePtr->numSrcBytes : -#endif - 0.0); - -#ifdef TCL_COMPILE_STATS - Tcl_AppendPrintfToObj(bufferObj, - " Code %lu = header %lu+inst %d+litObj %lu+exc %lu+aux %lu+cmdMap %d\n", - (unsigned long) codePtr->structureSize, - (unsigned long) (sizeof(ByteCode) - sizeof(size_t) - sizeof(Tcl_Time)), - codePtr->numCodeBytes, - (unsigned long) (codePtr->numLitObjects * sizeof(Tcl_Obj *)), - (unsigned long) (codePtr->numExceptRanges*sizeof(ExceptionRange)), - (unsigned long) (codePtr->numAuxDataItems * sizeof(AuxData)), - codePtr->numCmdLocBytes); -#endif /* TCL_COMPILE_STATS */ - - /* - * If the ByteCode is the compiled body of a Tcl procedure, print - * information about that procedure. Note that we don't know the - * procedure's name since ByteCode's can be shared among procedures. - */ - - if (codePtr->procPtr != NULL) { - Proc *procPtr = codePtr->procPtr; - int numCompiledLocals = procPtr->numCompiledLocals; - - sprintf(ptrBuf1, "%p", procPtr); - Tcl_AppendPrintfToObj(bufferObj, - " Proc 0x%s, refCt %d, args %d, compiled locals %d\n", - ptrBuf1, procPtr->refCount, procPtr->numArgs, - numCompiledLocals); - if (numCompiledLocals > 0) { - CompiledLocal *localPtr = procPtr->firstLocalPtr; - - for (i = 0; i < numCompiledLocals; i++) { - Tcl_AppendPrintfToObj(bufferObj, - " slot %d%s%s%s%s%s%s", i, - (localPtr->flags & (VAR_ARRAY|VAR_LINK)) ? "" : ", scalar", - (localPtr->flags & VAR_ARRAY) ? ", array" : "", - (localPtr->flags & VAR_LINK) ? ", link" : "", - (localPtr->flags & VAR_ARGUMENT) ? ", arg" : "", - (localPtr->flags & VAR_TEMPORARY) ? ", temp" : "", - (localPtr->flags & VAR_RESOLVED) ? ", resolved" : ""); - if (TclIsVarTemporary(localPtr)) { - Tcl_AppendToObj(bufferObj, "\n", -1); - } else { - Tcl_AppendPrintfToObj(bufferObj, ", \"%s\"\n", - localPtr->name); - } - localPtr = localPtr->nextPtr; - } - } - } - - /* - * Print the ExceptionRange array. - */ - - if (codePtr->numExceptRanges > 0) { - Tcl_AppendPrintfToObj(bufferObj, " Exception ranges %d, depth %d:\n", - codePtr->numExceptRanges, codePtr->maxExceptDepth); - for (i = 0; i < codePtr->numExceptRanges; i++) { - ExceptionRange *rangePtr = &codePtr->exceptArrayPtr[i]; - - Tcl_AppendPrintfToObj(bufferObj, - " %d: level %d, %s, pc %d-%d, ", - i, rangePtr->nestingLevel, - (rangePtr->type==LOOP_EXCEPTION_RANGE ? "loop" : "catch"), - rangePtr->codeOffset, - (rangePtr->codeOffset + rangePtr->numCodeBytes - 1)); - switch (rangePtr->type) { - case LOOP_EXCEPTION_RANGE: - Tcl_AppendPrintfToObj(bufferObj, "continue %d, break %d\n", - rangePtr->continueOffset, rangePtr->breakOffset); - break; - case CATCH_EXCEPTION_RANGE: - Tcl_AppendPrintfToObj(bufferObj, "catch %d\n", - rangePtr->catchOffset); - break; - default: - Tcl_Panic("TclDisassembleByteCodeObj: bad ExceptionRange type %d", - rangePtr->type); - } - } - } - - /* - * If there were no commands (e.g., an expression or an empty string was - * compiled), just print all instructions and return. - */ - - if (numCmds == 0) { - pc = codeStart; - while (pc < codeLimit) { - Tcl_AppendToObj(bufferObj, " ", -1); - pc += FormatInstruction(codePtr, pc, bufferObj); - } - return bufferObj; - } - - /* - * Print table showing the code offset, source offset, and source length - * for each command. These are encoded as a sequence of bytes. - */ - - Tcl_AppendPrintfToObj(bufferObj, " Commands %d:", numCmds); - codeDeltaNext = codePtr->codeDeltaStart; - codeLengthNext = codePtr->codeLengthStart; - srcDeltaNext = codePtr->srcDeltaStart; - srcLengthNext = codePtr->srcLengthStart; - codeOffset = srcOffset = 0; - for (i = 0; i < numCmds; i++) { - if ((unsigned) *codeDeltaNext == (unsigned) 0xFF) { - codeDeltaNext++; - delta = TclGetInt4AtPtr(codeDeltaNext); - codeDeltaNext += 4; - } else { - delta = TclGetInt1AtPtr(codeDeltaNext); - codeDeltaNext++; - } - codeOffset += delta; - - if ((unsigned) *codeLengthNext == (unsigned) 0xFF) { - codeLengthNext++; - codeLen = TclGetInt4AtPtr(codeLengthNext); - codeLengthNext += 4; - } else { - codeLen = TclGetInt1AtPtr(codeLengthNext); - codeLengthNext++; - } - - if ((unsigned) *srcDeltaNext == (unsigned) 0xFF) { - srcDeltaNext++; - delta = TclGetInt4AtPtr(srcDeltaNext); - srcDeltaNext += 4; - } else { - delta = TclGetInt1AtPtr(srcDeltaNext); - srcDeltaNext++; - } - srcOffset += delta; - - if ((unsigned) *srcLengthNext == (unsigned) 0xFF) { - srcLengthNext++; - srcLen = TclGetInt4AtPtr(srcLengthNext); - srcLengthNext += 4; - } else { - srcLen = TclGetInt1AtPtr(srcLengthNext); - srcLengthNext++; - } - - Tcl_AppendPrintfToObj(bufferObj, "%s%4d: pc %d-%d, src %d-%d", - ((i % 2)? " " : "\n "), - (i+1), codeOffset, (codeOffset + codeLen - 1), - srcOffset, (srcOffset + srcLen - 1)); - } - if (numCmds > 0) { - Tcl_AppendToObj(bufferObj, "\n", -1); - } - - /* - * Print each instruction. If the instruction corresponds to the start of - * a command, print the command's source. Note that we don't need the code - * length here. - */ - - codeDeltaNext = codePtr->codeDeltaStart; - srcDeltaNext = codePtr->srcDeltaStart; - srcLengthNext = codePtr->srcLengthStart; - codeOffset = srcOffset = 0; - pc = codeStart; - for (i = 0; i < numCmds; i++) { - if ((unsigned) *codeDeltaNext == (unsigned) 0xFF) { - codeDeltaNext++; - delta = TclGetInt4AtPtr(codeDeltaNext); - codeDeltaNext += 4; - } else { - delta = TclGetInt1AtPtr(codeDeltaNext); - codeDeltaNext++; - } - codeOffset += delta; - - if ((unsigned) *srcDeltaNext == (unsigned) 0xFF) { - srcDeltaNext++; - delta = TclGetInt4AtPtr(srcDeltaNext); - srcDeltaNext += 4; - } else { - delta = TclGetInt1AtPtr(srcDeltaNext); - srcDeltaNext++; - } - srcOffset += delta; - - if ((unsigned) *srcLengthNext == (unsigned) 0xFF) { - srcLengthNext++; - srcLen = TclGetInt4AtPtr(srcLengthNext); - srcLengthNext += 4; - } else { - srcLen = TclGetInt1AtPtr(srcLengthNext); - srcLengthNext++; - } - - /* - * Print instructions before command i. - */ - - while ((pc-codeStart) < codeOffset) { - Tcl_AppendToObj(bufferObj, " ", -1); - pc += FormatInstruction(codePtr, pc, bufferObj); - } - - Tcl_AppendPrintfToObj(bufferObj, " Command %d: ", i+1); - PrintSourceToObj(bufferObj, (codePtr->source + srcOffset), - TclMin(srcLen, 55)); - Tcl_AppendToObj(bufferObj, "\n", -1); - } - if (pc < codeLimit) { - /* - * Print instructions after the last command. - */ - - while (pc < codeLimit) { - Tcl_AppendToObj(bufferObj, " ", -1); - pc += FormatInstruction(codePtr, pc, bufferObj); - } - } - return bufferObj; -} - -/* - *---------------------------------------------------------------------- - * - * FormatInstruction -- - * - * Appends a representation of a bytecode instruction to a Tcl_Obj. - * - *---------------------------------------------------------------------- - */ - -static int -FormatInstruction( - ByteCode *codePtr, /* Bytecode containing the instruction. */ - const unsigned char *pc, /* Points to first byte of instruction. */ - Tcl_Obj *bufferObj) /* Object to append instruction info to. */ -{ - Proc *procPtr = codePtr->procPtr; - unsigned char opCode = *pc; - register const InstructionDesc *instDesc = &tclInstructionTable[opCode]; - unsigned char *codeStart = codePtr->codeStart; - unsigned pcOffset = pc - codeStart; - int opnd = 0, i, j, numBytes = 1; - int localCt = procPtr ? procPtr->numCompiledLocals : 0; - CompiledLocal *localPtr = procPtr ? procPtr->firstLocalPtr : NULL; - char suffixBuffer[128]; /* Additional info to print after main opcode - * and immediates. */ - char *suffixSrc = NULL; - Tcl_Obj *suffixObj = NULL; - AuxData *auxPtr = NULL; - - suffixBuffer[0] = '\0'; - Tcl_AppendPrintfToObj(bufferObj, "(%u) %s ", pcOffset, instDesc->name); - for (i = 0; i < instDesc->numOperands; i++) { - switch (instDesc->opTypes[i]) { - case OPERAND_INT1: - opnd = TclGetInt1AtPtr(pc+numBytes); numBytes++; - if (opCode == INST_JUMP1 || opCode == INST_JUMP_TRUE1 - || opCode == INST_JUMP_FALSE1) { - sprintf(suffixBuffer, "pc %u", pcOffset+opnd); - } - Tcl_AppendPrintfToObj(bufferObj, "%+d ", opnd); - break; - case OPERAND_INT4: - opnd = TclGetInt4AtPtr(pc+numBytes); numBytes += 4; - if (opCode == INST_JUMP4 || opCode == INST_JUMP_TRUE4 - || opCode == INST_JUMP_FALSE4) { - sprintf(suffixBuffer, "pc %u", pcOffset+opnd); - } else if (opCode == INST_START_CMD) { - sprintf(suffixBuffer, "next cmd at pc %u", pcOffset+opnd); - } - Tcl_AppendPrintfToObj(bufferObj, "%+d ", opnd); - break; - case OPERAND_UINT1: - opnd = TclGetUInt1AtPtr(pc+numBytes); numBytes++; - if (opCode == INST_PUSH1) { - suffixObj = codePtr->objArrayPtr[opnd]; - } - Tcl_AppendPrintfToObj(bufferObj, "%u ", (unsigned) opnd); - break; - case OPERAND_AUX4: - case OPERAND_UINT4: - opnd = TclGetUInt4AtPtr(pc+numBytes); numBytes += 4; - if (opCode == INST_PUSH4) { - suffixObj = codePtr->objArrayPtr[opnd]; - } else if (opCode == INST_START_CMD && opnd != 1) { - sprintf(suffixBuffer+strlen(suffixBuffer), - ", %u cmds start here", opnd); - } - Tcl_AppendPrintfToObj(bufferObj, "%u ", (unsigned) opnd); - if (instDesc->opTypes[i] == OPERAND_AUX4) { - auxPtr = &codePtr->auxDataArrayPtr[opnd]; - } - break; - case OPERAND_IDX4: - opnd = TclGetInt4AtPtr(pc+numBytes); numBytes += 4; - if (opnd >= -1) { - Tcl_AppendPrintfToObj(bufferObj, "%d ", opnd); - } else if (opnd == -2) { - Tcl_AppendPrintfToObj(bufferObj, "end "); - } else { - Tcl_AppendPrintfToObj(bufferObj, "end-%d ", -2-opnd); - } - break; - case OPERAND_LVT1: - opnd = TclGetUInt1AtPtr(pc+numBytes); - numBytes++; - goto printLVTindex; - case OPERAND_LVT4: - opnd = TclGetUInt4AtPtr(pc+numBytes); - numBytes += 4; - printLVTindex: - if (localPtr != NULL) { - if (opnd >= localCt) { - Tcl_Panic("FormatInstruction: bad local var index %u (%u locals)", - (unsigned) opnd, localCt); - } - for (j = 0; j < opnd; j++) { - localPtr = localPtr->nextPtr; - } - if (TclIsVarTemporary(localPtr)) { - sprintf(suffixBuffer, "temp var %u", (unsigned) opnd); - } else { - sprintf(suffixBuffer, "var "); - suffixSrc = localPtr->name; - } - } - Tcl_AppendPrintfToObj(bufferObj, "%%v%u ", (unsigned) opnd); - break; - case OPERAND_NONE: - default: - break; - } - } - if (suffixObj) { - const char *bytes; - int length; - - Tcl_AppendToObj(bufferObj, "\t# ", -1); - bytes = Tcl_GetStringFromObj(codePtr->objArrayPtr[opnd], &length); - PrintSourceToObj(bufferObj, bytes, TclMin(length, 40)); - } else if (suffixBuffer[0]) { - Tcl_AppendPrintfToObj(bufferObj, "\t# %s", suffixBuffer); - if (suffixSrc) { - PrintSourceToObj(bufferObj, suffixSrc, 40); - } - } - Tcl_AppendToObj(bufferObj, "\n", -1); - if (auxPtr && auxPtr->type->printProc) { - Tcl_AppendToObj(bufferObj, "\t\t[", -1); - auxPtr->type->printProc(auxPtr->clientData, bufferObj, codePtr, - pcOffset); - Tcl_AppendToObj(bufferObj, "]\n", -1); - } - return numBytes; -} - -/* - *---------------------------------------------------------------------- - * - * TclGetInnerContext -- - * - * If possible, returns a list capturing the inner context. Otherwise - * return NULL. - * - *---------------------------------------------------------------------- - */ - -Tcl_Obj * -TclGetInnerContext( - Tcl_Interp *interp, - const unsigned char *pc, - Tcl_Obj **tosPtr) -{ - int objc = 0, off = 0; - Tcl_Obj *result; - Interp *iPtr = (Interp *) interp; - - switch (*pc) { - case INST_STR_LEN: - case INST_LNOT: - case INST_BITNOT: - case INST_UMINUS: - case INST_UPLUS: - case INST_TRY_CVT_TO_NUMERIC: - case INST_EXPAND_STKTOP: - case INST_EXPR_STK: - objc = 1; - break; - - case INST_LIST_IN: - case INST_LIST_NOT_IN: /* Basic list containment operators. */ - case INST_STR_EQ: - case INST_STR_NEQ: /* String (in)equality check */ - case INST_STR_CMP: /* String compare. */ - case INST_STR_INDEX: - case INST_STR_MATCH: - case INST_REGEXP: - case INST_EQ: - case INST_NEQ: - case INST_LT: - case INST_GT: - case INST_LE: - case INST_GE: - case INST_MOD: - case INST_LSHIFT: - case INST_RSHIFT: - case INST_BITOR: - case INST_BITXOR: - case INST_BITAND: - case INST_EXPON: - case INST_ADD: - case INST_SUB: - case INST_DIV: - case INST_MULT: - objc = 2; - break; - - case INST_RETURN_STK: - /* early pop. TODO: dig out opt dict too :/ */ - objc = 1; - break; - - case INST_SYNTAX: - case INST_RETURN_IMM: - objc = 2; - break; - - case INST_INVOKE_STK4: - objc = TclGetUInt4AtPtr(pc+1); - break; - - case INST_INVOKE_STK1: - objc = TclGetUInt1AtPtr(pc+1); - break; - } - - result = iPtr->innerContext; - if (Tcl_IsShared(result)) { - Tcl_DecrRefCount(result); - iPtr->innerContext = result = Tcl_NewListObj(objc + 1, NULL); - Tcl_IncrRefCount(result); - } else { - int len; - - /* - * Reset while keeping the list intrep as much as possible. - */ - - Tcl_ListObjLength(interp, result, &len); - Tcl_ListObjReplace(interp, result, 0, len, 0, NULL); - } - Tcl_ListObjAppendElement(NULL, result, TclNewInstNameObj(*pc)); - - for (; objc>0 ; objc--) { - Tcl_Obj *objPtr; - - objPtr = tosPtr[1 - objc + off]; - if (!objPtr) { - Tcl_Panic("InnerContext: bad tos -- appending null object"); - } - if ((objPtr->refCount<=0) -#ifdef TCL_MEM_DEBUG - || (objPtr->refCount==0x61616161) -#endif - ) { - Tcl_Panic("InnerContext: bad tos -- appending freed object %p", - objPtr); - } - Tcl_ListObjAppendElement(NULL, result, objPtr); - } - - return result; -} - -/* - *---------------------------------------------------------------------- - * - * TclNewInstNameObj -- - * - * Creates a new InstName Tcl_Obj based on the given instruction - * - *---------------------------------------------------------------------- - */ - -Tcl_Obj * -TclNewInstNameObj( - unsigned char inst) -{ - Tcl_Obj *objPtr = Tcl_NewObj(); - - objPtr->typePtr = &tclInstNameType; - objPtr->internalRep.longValue = (long) inst; - objPtr->bytes = NULL; - - return objPtr; -} - -/* - *---------------------------------------------------------------------- - * - * UpdateStringOfInstName -- - * - * Update the string representation for an instruction name object. - * - *---------------------------------------------------------------------- - */ - -static void -UpdateStringOfInstName( - Tcl_Obj *objPtr) -{ - int inst = objPtr->internalRep.longValue; - char *s, buf[20]; - int len; - - if ((inst < 0) || (inst > LAST_INST_OPCODE)) { - sprintf(buf, "inst_%d", inst); - s = buf; - } else { - s = (char *) tclInstructionTable[objPtr->internalRep.longValue].name; - } - len = strlen(s); - objPtr->bytes = ckalloc(len + 1); - memcpy(objPtr->bytes, s, len + 1); - objPtr->length = len; -} - -/* - *---------------------------------------------------------------------- - * - * PrintSourceToObj -- - * - * Appends a quoted representation of a string to a Tcl_Obj. - * - *---------------------------------------------------------------------- - */ - -static void -PrintSourceToObj( - Tcl_Obj *appendObj, /* The object to print the source to. */ - const char *stringPtr, /* The string to print. */ - int maxChars) /* Maximum number of chars to print. */ -{ - register const char *p; - register int i = 0; - - if (stringPtr == NULL) { - Tcl_AppendToObj(appendObj, "\"\"", -1); - return; - } - - Tcl_AppendToObj(appendObj, "\"", -1); - p = stringPtr; - for (; (*p != '\0') && (i < maxChars); p++, i++) { - switch (*p) { - case '"': - Tcl_AppendToObj(appendObj, "\\\"", -1); - continue; - case '\f': - Tcl_AppendToObj(appendObj, "\\f", -1); - continue; - case '\n': - Tcl_AppendToObj(appendObj, "\\n", -1); - continue; - case '\r': - Tcl_AppendToObj(appendObj, "\\r", -1); - continue; - case '\t': - Tcl_AppendToObj(appendObj, "\\t", -1); - continue; - case '\v': - Tcl_AppendToObj(appendObj, "\\v", -1); - continue; - default: - Tcl_AppendPrintfToObj(appendObj, "%c", *p); - continue; - } - } - Tcl_AppendToObj(appendObj, "\"", -1); -} - #ifdef TCL_COMPILE_STATS /* *---------------------------------------------------------------------- diff --git a/generic/tclCompile.h b/generic/tclCompile.h index 9af4911..f28403d 100644 --- a/generic/tclCompile.h +++ b/generic/tclCompile.h @@ -48,6 +48,13 @@ MODULE_SCOPE int tclTraceCompile; MODULE_SCOPE int tclTraceExec; #endif + +/* + * The type of lambda expressions. Note that every lambda will *always* have a + * string representation. + */ + +MODULE_SCOPE const Tcl_ObjType tclLambdaType; /* *------------------------------------------------------------------------ @@ -1099,12 +1106,15 @@ MODULE_SCOPE void TclVerifyLocalLiteralTable(CompileEnv *envPtr); MODULE_SCOPE int TclWordKnownAtCompileTime(Tcl_Token *tokenPtr, Tcl_Obj *valuePtr); MODULE_SCOPE void TclLogCommandInfo(Tcl_Interp *interp, - const char *script, - const char *command, int length, - const unsigned char *pc, Tcl_Obj **tosPtr); + const char *script, const char *command, + int length, const unsigned char *pc, + Tcl_Obj **tosPtr); MODULE_SCOPE Tcl_Obj *TclGetInnerContext(Tcl_Interp *interp, - const unsigned char *pc, Tcl_Obj **tosPtr); + const unsigned char *pc, Tcl_Obj **tosPtr); MODULE_SCOPE Tcl_Obj *TclNewInstNameObj(unsigned char inst); +MODULE_SCOPE int TclPushProcCallFrame(ClientData clientData, + register Tcl_Interp *interp, int objc, + Tcl_Obj *const objv[], int isLambda); /* diff --git a/generic/tclDisassemble.c b/generic/tclDisassemble.c new file mode 100644 index 0000000..bc84763 --- /dev/null +++ b/generic/tclDisassemble.c @@ -0,0 +1,1045 @@ +/* + * tclDisassemble.c -- + * + * This file contains procedures that disassemble bytecode into either + * human-readable or Tcl-processable forms. + * + * Copyright (c) 1996-1998 Sun Microsystems, Inc. + * Copyright (c) 2001 by Kevin B. Kenny. All rights reserved. + * Copyright (c) 2013 Donal K. Fellows. + * + * See the file "license.terms" for information on usage and redistribution of + * this file, and for a DISCLAIMER OF ALL WARRANTIES. + */ + +#include "tclInt.h" +#include "tclCompile.h" +#include "tclOOInt.h" +#include + +/* + * Prototypes for procedures defined later in this file: + */ + +static int FormatInstruction(ByteCode *codePtr, + const unsigned char *pc, Tcl_Obj *bufferObj); +static void PrintSourceToObj(Tcl_Obj *appendObj, + const char *stringPtr, int maxChars); +static void UpdateStringOfInstName(Tcl_Obj *objPtr); + +/* + * The structure below defines an instruction name Tcl object to allow + * reporting of inner contexts in errorstack without string allocation. + */ + +static const Tcl_ObjType tclInstNameType = { + "instname", /* name */ + NULL, /* freeIntRepProc */ + NULL, /* dupIntRepProc */ + UpdateStringOfInstName, /* updateStringProc */ + NULL, /* setFromAnyProc */ +}; + +#ifdef TCL_COMPILE_DEBUG +/* + *---------------------------------------------------------------------- + * + * TclPrintByteCodeObj -- + * + * This procedure prints ("disassembles") the instructions of a bytecode + * object to stdout. + * + * Results: + * None. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +void +TclPrintByteCodeObj( + Tcl_Interp *interp, /* Used only for Tcl_GetStringFromObj. */ + Tcl_Obj *objPtr) /* The bytecode object to disassemble. */ +{ + Tcl_Obj *bufPtr = TclDisassembleByteCodeObj(objPtr); + + fprintf(stdout, "\n%s", TclGetString(bufPtr)); + Tcl_DecrRefCount(bufPtr); +} + +/* + *---------------------------------------------------------------------- + * + * TclPrintInstruction -- + * + * This procedure prints ("disassembles") one instruction from a bytecode + * object to stdout. + * + * Results: + * Returns the length in bytes of the current instruiction. + * + * Side effects: + * None. + * + *---------------------------------------------------------------------- + */ + +int +TclPrintInstruction( + ByteCode *codePtr, /* Bytecode containing the instruction. */ + const unsigned char *pc) /* Points to first byte of instruction. */ +{ + Tcl_Obj *bufferObj; + int numBytes; + + TclNewObj(bufferObj); + numBytes = FormatInstruction(codePtr, pc, bufferObj); + fprintf(stdout, "%s", TclGetString(bufferObj)); + Tcl_DecrRefCount(bufferObj); + return numBytes; +} + +/* + *---------------------------------------------------------------------- + * + * TclPrintObject -- + * + * This procedure prints up to a specified number of characters from the + * argument Tcl object's string representation to a specified file. + * + * Results: + * None. + * + * Side effects: + * Outputs characters to the specified file. + * + *---------------------------------------------------------------------- + */ + +void +TclPrintObject( + FILE *outFile, /* The file to print the source to. */ + Tcl_Obj *objPtr, /* Points to the Tcl object whose string + * representation should be printed. */ + int maxChars) /* Maximum number of chars to print. */ +{ + char *bytes; + int length; + + bytes = Tcl_GetStringFromObj(objPtr, &length); + TclPrintSource(outFile, bytes, TclMin(length, maxChars)); +} + +/* + *---------------------------------------------------------------------- + * + * TclPrintSource -- + * + * This procedure prints up to a specified number of characters from the + * argument string to a specified file. It tries to produce legible + * output by adding backslashes as necessary. + * + * Results: + * None. + * + * Side effects: + * Outputs characters to the specified file. + * + *---------------------------------------------------------------------- + */ + +void +TclPrintSource( + FILE *outFile, /* The file to print the source to. */ + const char *stringPtr, /* The string to print. */ + int maxChars) /* Maximum number of chars to print. */ +{ + Tcl_Obj *bufferObj; + + TclNewObj(bufferObj); + PrintSourceToObj(bufferObj, stringPtr, maxChars); + fprintf(outFile, "%s", TclGetString(bufferObj)); + Tcl_DecrRefCount(bufferObj); +} +#endif /* TCL_COMPILE_DEBUG */ + +/* + *---------------------------------------------------------------------- + * + * TclDisassembleByteCodeObj -- + * + * Given an object which is of bytecode type, return a disassembled + * version of the bytecode (in a new refcount 0 object). No guarantees + * are made about the details of the contents of the result. + * + *---------------------------------------------------------------------- + */ + +Tcl_Obj * +TclDisassembleByteCodeObj( + Tcl_Obj *objPtr) /* The bytecode object to disassemble. */ +{ + ByteCode *codePtr = objPtr->internalRep.twoPtrValue.ptr1; + unsigned char *codeStart, *codeLimit, *pc; + unsigned char *codeDeltaNext, *codeLengthNext; + unsigned char *srcDeltaNext, *srcLengthNext; + int codeOffset, codeLen, srcOffset, srcLen, numCmds, delta, i; + Interp *iPtr = (Interp *) *codePtr->interpHandle; + Tcl_Obj *bufferObj; + char ptrBuf1[20], ptrBuf2[20]; + + TclNewObj(bufferObj); + if (codePtr->refCount <= 0) { + return bufferObj; /* Already freed. */ + } + + codeStart = codePtr->codeStart; + codeLimit = codeStart + codePtr->numCodeBytes; + numCmds = codePtr->numCommands; + + /* + * Print header lines describing the ByteCode. + */ + + sprintf(ptrBuf1, "%p", codePtr); + sprintf(ptrBuf2, "%p", iPtr); + Tcl_AppendPrintfToObj(bufferObj, + "ByteCode 0x%s, refCt %u, epoch %u, interp 0x%s (epoch %u)\n", + ptrBuf1, codePtr->refCount, codePtr->compileEpoch, ptrBuf2, + iPtr->compileEpoch); + Tcl_AppendToObj(bufferObj, " Source ", -1); + PrintSourceToObj(bufferObj, codePtr->source, + TclMin(codePtr->numSrcBytes, 55)); + Tcl_AppendPrintfToObj(bufferObj, + "\n Cmds %d, src %d, inst %d, litObjs %u, aux %d, stkDepth %u, code/src %.2f\n", + numCmds, codePtr->numSrcBytes, codePtr->numCodeBytes, + codePtr->numLitObjects, codePtr->numAuxDataItems, + codePtr->maxStackDepth, +#ifdef TCL_COMPILE_STATS + codePtr->numSrcBytes? + codePtr->structureSize/(float)codePtr->numSrcBytes : +#endif + 0.0); + +#ifdef TCL_COMPILE_STATS + Tcl_AppendPrintfToObj(bufferObj, + " Code %lu = header %lu+inst %d+litObj %lu+exc %lu+aux %lu+cmdMap %d\n", + (unsigned long) codePtr->structureSize, + (unsigned long) (sizeof(ByteCode) - sizeof(size_t) - sizeof(Tcl_Time)), + codePtr->numCodeBytes, + (unsigned long) (codePtr->numLitObjects * sizeof(Tcl_Obj *)), + (unsigned long) (codePtr->numExceptRanges*sizeof(ExceptionRange)), + (unsigned long) (codePtr->numAuxDataItems * sizeof(AuxData)), + codePtr->numCmdLocBytes); +#endif /* TCL_COMPILE_STATS */ + + /* + * If the ByteCode is the compiled body of a Tcl procedure, print + * information about that procedure. Note that we don't know the + * procedure's name since ByteCode's can be shared among procedures. + */ + + if (codePtr->procPtr != NULL) { + Proc *procPtr = codePtr->procPtr; + int numCompiledLocals = procPtr->numCompiledLocals; + + sprintf(ptrBuf1, "%p", procPtr); + Tcl_AppendPrintfToObj(bufferObj, + " Proc 0x%s, refCt %d, args %d, compiled locals %d\n", + ptrBuf1, procPtr->refCount, procPtr->numArgs, + numCompiledLocals); + if (numCompiledLocals > 0) { + CompiledLocal *localPtr = procPtr->firstLocalPtr; + + for (i = 0; i < numCompiledLocals; i++) { + Tcl_AppendPrintfToObj(bufferObj, + " slot %d%s%s%s%s%s%s", i, + (localPtr->flags & (VAR_ARRAY|VAR_LINK)) ? "" : ", scalar", + (localPtr->flags & VAR_ARRAY) ? ", array" : "", + (localPtr->flags & VAR_LINK) ? ", link" : "", + (localPtr->flags & VAR_ARGUMENT) ? ", arg" : "", + (localPtr->flags & VAR_TEMPORARY) ? ", temp" : "", + (localPtr->flags & VAR_RESOLVED) ? ", resolved" : ""); + if (TclIsVarTemporary(localPtr)) { + Tcl_AppendToObj(bufferObj, "\n", -1); + } else { + Tcl_AppendPrintfToObj(bufferObj, ", \"%s\"\n", + localPtr->name); + } + localPtr = localPtr->nextPtr; + } + } + } + + /* + * Print the ExceptionRange array. + */ + + if (codePtr->numExceptRanges > 0) { + Tcl_AppendPrintfToObj(bufferObj, " Exception ranges %d, depth %d:\n", + codePtr->numExceptRanges, codePtr->maxExceptDepth); + for (i = 0; i < codePtr->numExceptRanges; i++) { + ExceptionRange *rangePtr = &codePtr->exceptArrayPtr[i]; + + Tcl_AppendPrintfToObj(bufferObj, + " %d: level %d, %s, pc %d-%d, ", + i, rangePtr->nestingLevel, + (rangePtr->type==LOOP_EXCEPTION_RANGE ? "loop" : "catch"), + rangePtr->codeOffset, + (rangePtr->codeOffset + rangePtr->numCodeBytes - 1)); + switch (rangePtr->type) { + case LOOP_EXCEPTION_RANGE: + Tcl_AppendPrintfToObj(bufferObj, "continue %d, break %d\n", + rangePtr->continueOffset, rangePtr->breakOffset); + break; + case CATCH_EXCEPTION_RANGE: + Tcl_AppendPrintfToObj(bufferObj, "catch %d\n", + rangePtr->catchOffset); + break; + default: + Tcl_Panic("TclDisassembleByteCodeObj: bad ExceptionRange type %d", + rangePtr->type); + } + } + } + + /* + * If there were no commands (e.g., an expression or an empty string was + * compiled), just print all instructions and return. + */ + + if (numCmds == 0) { + pc = codeStart; + while (pc < codeLimit) { + Tcl_AppendToObj(bufferObj, " ", -1); + pc += FormatInstruction(codePtr, pc, bufferObj); + } + return bufferObj; + } + + /* + * Print table showing the code offset, source offset, and source length + * for each command. These are encoded as a sequence of bytes. + */ + + Tcl_AppendPrintfToObj(bufferObj, " Commands %d:", numCmds); + codeDeltaNext = codePtr->codeDeltaStart; + codeLengthNext = codePtr->codeLengthStart; + srcDeltaNext = codePtr->srcDeltaStart; + srcLengthNext = codePtr->srcLengthStart; + codeOffset = srcOffset = 0; + for (i = 0; i < numCmds; i++) { + if ((unsigned) *codeDeltaNext == (unsigned) 0xFF) { + codeDeltaNext++; + delta = TclGetInt4AtPtr(codeDeltaNext); + codeDeltaNext += 4; + } else { + delta = TclGetInt1AtPtr(codeDeltaNext); + codeDeltaNext++; + } + codeOffset += delta; + + if ((unsigned) *codeLengthNext == (unsigned) 0xFF) { + codeLengthNext++; + codeLen = TclGetInt4AtPtr(codeLengthNext); + codeLengthNext += 4; + } else { + codeLen = TclGetInt1AtPtr(codeLengthNext); + codeLengthNext++; + } + + if ((unsigned) *srcDeltaNext == (unsigned) 0xFF) { + srcDeltaNext++; + delta = TclGetInt4AtPtr(srcDeltaNext); + srcDeltaNext += 4; + } else { + delta = TclGetInt1AtPtr(srcDeltaNext); + srcDeltaNext++; + } + srcOffset += delta; + + if ((unsigned) *srcLengthNext == (unsigned) 0xFF) { + srcLengthNext++; + srcLen = TclGetInt4AtPtr(srcLengthNext); + srcLengthNext += 4; + } else { + srcLen = TclGetInt1AtPtr(srcLengthNext); + srcLengthNext++; + } + + Tcl_AppendPrintfToObj(bufferObj, "%s%4d: pc %d-%d, src %d-%d", + ((i % 2)? " " : "\n "), + (i+1), codeOffset, (codeOffset + codeLen - 1), + srcOffset, (srcOffset + srcLen - 1)); + } + if (numCmds > 0) { + Tcl_AppendToObj(bufferObj, "\n", -1); + } + + /* + * Print each instruction. If the instruction corresponds to the start of + * a command, print the command's source. Note that we don't need the code + * length here. + */ + + codeDeltaNext = codePtr->codeDeltaStart; + srcDeltaNext = codePtr->srcDeltaStart; + srcLengthNext = codePtr->srcLengthStart; + codeOffset = srcOffset = 0; + pc = codeStart; + for (i = 0; i < numCmds; i++) { + if ((unsigned) *codeDeltaNext == (unsigned) 0xFF) { + codeDeltaNext++; + delta = TclGetInt4AtPtr(codeDeltaNext); + codeDeltaNext += 4; + } else { + delta = TclGetInt1AtPtr(codeDeltaNext); + codeDeltaNext++; + } + codeOffset += delta; + + if ((unsigned) *srcDeltaNext == (unsigned) 0xFF) { + srcDeltaNext++; + delta = TclGetInt4AtPtr(srcDeltaNext); + srcDeltaNext += 4; + } else { + delta = TclGetInt1AtPtr(srcDeltaNext); + srcDeltaNext++; + } + srcOffset += delta; + + if ((unsigned) *srcLengthNext == (unsigned) 0xFF) { + srcLengthNext++; + srcLen = TclGetInt4AtPtr(srcLengthNext); + srcLengthNext += 4; + } else { + srcLen = TclGetInt1AtPtr(srcLengthNext); + srcLengthNext++; + } + + /* + * Print instructions before command i. + */ + + while ((pc-codeStart) < codeOffset) { + Tcl_AppendToObj(bufferObj, " ", -1); + pc += FormatInstruction(codePtr, pc, bufferObj); + } + + Tcl_AppendPrintfToObj(bufferObj, " Command %d: ", i+1); + PrintSourceToObj(bufferObj, (codePtr->source + srcOffset), + TclMin(srcLen, 55)); + Tcl_AppendToObj(bufferObj, "\n", -1); + } + if (pc < codeLimit) { + /* + * Print instructions after the last command. + */ + + while (pc < codeLimit) { + Tcl_AppendToObj(bufferObj, " ", -1); + pc += FormatInstruction(codePtr, pc, bufferObj); + } + } + return bufferObj; +} + +/* + *---------------------------------------------------------------------- + * + * FormatInstruction -- + * + * Appends a representation of a bytecode instruction to a Tcl_Obj. + * + *---------------------------------------------------------------------- + */ + +static int +FormatInstruction( + ByteCode *codePtr, /* Bytecode containing the instruction. */ + const unsigned char *pc, /* Points to first byte of instruction. */ + Tcl_Obj *bufferObj) /* Object to append instruction info to. */ +{ + Proc *procPtr = codePtr->procPtr; + unsigned char opCode = *pc; + register const InstructionDesc *instDesc = &tclInstructionTable[opCode]; + unsigned char *codeStart = codePtr->codeStart; + unsigned pcOffset = pc - codeStart; + int opnd = 0, i, j, numBytes = 1; + int localCt = procPtr ? procPtr->numCompiledLocals : 0; + CompiledLocal *localPtr = procPtr ? procPtr->firstLocalPtr : NULL; + char suffixBuffer[128]; /* Additional info to print after main opcode + * and immediates. */ + char *suffixSrc = NULL; + Tcl_Obj *suffixObj = NULL; + AuxData *auxPtr = NULL; + + suffixBuffer[0] = '\0'; + Tcl_AppendPrintfToObj(bufferObj, "(%u) %s ", pcOffset, instDesc->name); + for (i = 0; i < instDesc->numOperands; i++) { + switch (instDesc->opTypes[i]) { + case OPERAND_INT1: + opnd = TclGetInt1AtPtr(pc+numBytes); numBytes++; + if (opCode == INST_JUMP1 || opCode == INST_JUMP_TRUE1 + || opCode == INST_JUMP_FALSE1) { + sprintf(suffixBuffer, "pc %u", pcOffset+opnd); + } + Tcl_AppendPrintfToObj(bufferObj, "%+d ", opnd); + break; + case OPERAND_INT4: + opnd = TclGetInt4AtPtr(pc+numBytes); numBytes += 4; + if (opCode == INST_JUMP4 || opCode == INST_JUMP_TRUE4 + || opCode == INST_JUMP_FALSE4) { + sprintf(suffixBuffer, "pc %u", pcOffset+opnd); + } else if (opCode == INST_START_CMD) { + sprintf(suffixBuffer, "next cmd at pc %u", pcOffset+opnd); + } + Tcl_AppendPrintfToObj(bufferObj, "%+d ", opnd); + break; + case OPERAND_UINT1: + opnd = TclGetUInt1AtPtr(pc+numBytes); numBytes++; + if (opCode == INST_PUSH1) { + suffixObj = codePtr->objArrayPtr[opnd]; + } + Tcl_AppendPrintfToObj(bufferObj, "%u ", (unsigned) opnd); + break; + case OPERAND_AUX4: + case OPERAND_UINT4: + opnd = TclGetUInt4AtPtr(pc+numBytes); numBytes += 4; + if (opCode == INST_PUSH4) { + suffixObj = codePtr->objArrayPtr[opnd]; + } else if (opCode == INST_START_CMD && opnd != 1) { + sprintf(suffixBuffer+strlen(suffixBuffer), + ", %u cmds start here", opnd); + } + Tcl_AppendPrintfToObj(bufferObj, "%u ", (unsigned) opnd); + if (instDesc->opTypes[i] == OPERAND_AUX4) { + auxPtr = &codePtr->auxDataArrayPtr[opnd]; + } + break; + case OPERAND_IDX4: + opnd = TclGetInt4AtPtr(pc+numBytes); numBytes += 4; + if (opnd >= -1) { + Tcl_AppendPrintfToObj(bufferObj, "%d ", opnd); + } else if (opnd == -2) { + Tcl_AppendPrintfToObj(bufferObj, "end "); + } else { + Tcl_AppendPrintfToObj(bufferObj, "end-%d ", -2-opnd); + } + break; + case OPERAND_LVT1: + opnd = TclGetUInt1AtPtr(pc+numBytes); + numBytes++; + goto printLVTindex; + case OPERAND_LVT4: + opnd = TclGetUInt4AtPtr(pc+numBytes); + numBytes += 4; + printLVTindex: + if (localPtr != NULL) { + if (opnd >= localCt) { + Tcl_Panic("FormatInstruction: bad local var index %u (%u locals)", + (unsigned) opnd, localCt); + } + for (j = 0; j < opnd; j++) { + localPtr = localPtr->nextPtr; + } + if (TclIsVarTemporary(localPtr)) { + sprintf(suffixBuffer, "temp var %u", (unsigned) opnd); + } else { + sprintf(suffixBuffer, "var "); + suffixSrc = localPtr->name; + } + } + Tcl_AppendPrintfToObj(bufferObj, "%%v%u ", (unsigned) opnd); + break; + case OPERAND_NONE: + default: + break; + } + } + if (suffixObj) { + const char *bytes; + int length; + + Tcl_AppendToObj(bufferObj, "\t# ", -1); + bytes = Tcl_GetStringFromObj(codePtr->objArrayPtr[opnd], &length); + PrintSourceToObj(bufferObj, bytes, TclMin(length, 40)); + } else if (suffixBuffer[0]) { + Tcl_AppendPrintfToObj(bufferObj, "\t# %s", suffixBuffer); + if (suffixSrc) { + PrintSourceToObj(bufferObj, suffixSrc, 40); + } + } + Tcl_AppendToObj(bufferObj, "\n", -1); + if (auxPtr && auxPtr->type->printProc) { + Tcl_AppendToObj(bufferObj, "\t\t[", -1); + auxPtr->type->printProc(auxPtr->clientData, bufferObj, codePtr, + pcOffset); + Tcl_AppendToObj(bufferObj, "]\n", -1); + } + return numBytes; +} + +/* + *---------------------------------------------------------------------- + * + * TclGetInnerContext -- + * + * If possible, returns a list capturing the inner context. Otherwise + * return NULL. + * + *---------------------------------------------------------------------- + */ + +Tcl_Obj * +TclGetInnerContext( + Tcl_Interp *interp, + const unsigned char *pc, + Tcl_Obj **tosPtr) +{ + int objc = 0, off = 0; + Tcl_Obj *result; + Interp *iPtr = (Interp *) interp; + + switch (*pc) { + case INST_STR_LEN: + case INST_LNOT: + case INST_BITNOT: + case INST_UMINUS: + case INST_UPLUS: + case INST_TRY_CVT_TO_NUMERIC: + case INST_EXPAND_STKTOP: + case INST_EXPR_STK: + objc = 1; + break; + + case INST_LIST_IN: + case INST_LIST_NOT_IN: /* Basic list containment operators. */ + case INST_STR_EQ: + case INST_STR_NEQ: /* String (in)equality check */ + case INST_STR_CMP: /* String compare. */ + case INST_STR_INDEX: + case INST_STR_MATCH: + case INST_REGEXP: + case INST_EQ: + case INST_NEQ: + case INST_LT: + case INST_GT: + case INST_LE: + case INST_GE: + case INST_MOD: + case INST_LSHIFT: + case INST_RSHIFT: + case INST_BITOR: + case INST_BITXOR: + case INST_BITAND: + case INST_EXPON: + case INST_ADD: + case INST_SUB: + case INST_DIV: + case INST_MULT: + objc = 2; + break; + + case INST_RETURN_STK: + /* early pop. TODO: dig out opt dict too :/ */ + objc = 1; + break; + + case INST_SYNTAX: + case INST_RETURN_IMM: + objc = 2; + break; + + case INST_INVOKE_STK4: + objc = TclGetUInt4AtPtr(pc+1); + break; + + case INST_INVOKE_STK1: + objc = TclGetUInt1AtPtr(pc+1); + break; + } + + result = iPtr->innerContext; + if (Tcl_IsShared(result)) { + Tcl_DecrRefCount(result); + iPtr->innerContext = result = Tcl_NewListObj(objc + 1, NULL); + Tcl_IncrRefCount(result); + } else { + int len; + + /* + * Reset while keeping the list intrep as much as possible. + */ + + Tcl_ListObjLength(interp, result, &len); + Tcl_ListObjReplace(interp, result, 0, len, 0, NULL); + } + Tcl_ListObjAppendElement(NULL, result, TclNewInstNameObj(*pc)); + + for (; objc>0 ; objc--) { + Tcl_Obj *objPtr; + + objPtr = tosPtr[1 - objc + off]; + if (!objPtr) { + Tcl_Panic("InnerContext: bad tos -- appending null object"); + } + if ((objPtr->refCount<=0) +#ifdef TCL_MEM_DEBUG + || (objPtr->refCount==0x61616161) +#endif + ) { + Tcl_Panic("InnerContext: bad tos -- appending freed object %p", + objPtr); + } + Tcl_ListObjAppendElement(NULL, result, objPtr); + } + + return result; +} + +/* + *---------------------------------------------------------------------- + * + * TclNewInstNameObj -- + * + * Creates a new InstName Tcl_Obj based on the given instruction + * + *---------------------------------------------------------------------- + */ + +Tcl_Obj * +TclNewInstNameObj( + unsigned char inst) +{ + Tcl_Obj *objPtr = Tcl_NewObj(); + + objPtr->typePtr = &tclInstNameType; + objPtr->internalRep.longValue = (long) inst; + objPtr->bytes = NULL; + + return objPtr; +} + +/* + *---------------------------------------------------------------------- + * + * UpdateStringOfInstName -- + * + * Update the string representation for an instruction name object. + * + *---------------------------------------------------------------------- + */ + +static void +UpdateStringOfInstName( + Tcl_Obj *objPtr) +{ + int inst = objPtr->internalRep.longValue; + char *s, buf[20]; + int len; + + if ((inst < 0) || (inst > LAST_INST_OPCODE)) { + sprintf(buf, "inst_%d", inst); + s = buf; + } else { + s = (char *) tclInstructionTable[objPtr->internalRep.longValue].name; + } + len = strlen(s); + objPtr->bytes = ckalloc(len + 1); + memcpy(objPtr->bytes, s, len + 1); + objPtr->length = len; +} + +/* + *---------------------------------------------------------------------- + * + * PrintSourceToObj -- + * + * Appends a quoted representation of a string to a Tcl_Obj. + * + *---------------------------------------------------------------------- + */ + +static void +PrintSourceToObj( + Tcl_Obj *appendObj, /* The object to print the source to. */ + const char *stringPtr, /* The string to print. */ + int maxChars) /* Maximum number of chars to print. */ +{ + register const char *p; + register int i = 0; + + if (stringPtr == NULL) { + Tcl_AppendToObj(appendObj, "\"\"", -1); + return; + } + + Tcl_AppendToObj(appendObj, "\"", -1); + p = stringPtr; + for (; (*p != '\0') && (i < maxChars); p++, i++) { + switch (*p) { + case '"': + Tcl_AppendToObj(appendObj, "\\\"", -1); + continue; + case '\f': + Tcl_AppendToObj(appendObj, "\\f", -1); + continue; + case '\n': + Tcl_AppendToObj(appendObj, "\\n", -1); + continue; + case '\r': + Tcl_AppendToObj(appendObj, "\\r", -1); + continue; + case '\t': + Tcl_AppendToObj(appendObj, "\\t", -1); + continue; + case '\v': + Tcl_AppendToObj(appendObj, "\\v", -1); + continue; + default: + Tcl_AppendPrintfToObj(appendObj, "%c", *p); + continue; + } + } + Tcl_AppendToObj(appendObj, "\"", -1); +} + +/* + *---------------------------------------------------------------------- + * + * Tcl_DisassembleObjCmd -- + * + * Implementation of the "::tcl::unsupported::disassemble" command. This + * command is not documented, but will disassemble procedures, lambda + * terms and general scripts. Note that will compile terms if necessary + * in order to disassemble them. + * + *---------------------------------------------------------------------- + */ + +int +Tcl_DisassembleObjCmd( + ClientData dummy, /* Not used. */ + Tcl_Interp *interp, /* Current interpreter. */ + int objc, /* Number of arguments. */ + Tcl_Obj *const objv[]) /* Argument objects. */ +{ + static const char *const types[] = { + "lambda", "method", "objmethod", "proc", "script", NULL + }; + enum Types { + DISAS_LAMBDA, DISAS_CLASS_METHOD, DISAS_OBJECT_METHOD, DISAS_PROC, + DISAS_SCRIPT + }; + int idx, result; + Tcl_Obj *codeObjPtr = NULL; + Proc *procPtr = NULL; + Tcl_HashEntry *hPtr; + Object *oPtr; + + if (objc < 2) { + Tcl_WrongNumArgs(interp, 1, objv, "type ..."); + return TCL_ERROR; + } + if (Tcl_GetIndexFromObj(interp, objv[1], types, "type", 0, &idx)!=TCL_OK){ + return TCL_ERROR; + } + + switch ((enum Types) idx) { + case DISAS_LAMBDA: { + Command cmd; + Tcl_Obj *nsObjPtr; + Tcl_Namespace *nsPtr; + + /* + * Compile (if uncompiled) and disassemble a lambda term. + */ + + if (objc != 3) { + Tcl_WrongNumArgs(interp, 2, objv, "lambdaTerm"); + return TCL_ERROR; + } + if (objv[2]->typePtr == &tclLambdaType) { + procPtr = objv[2]->internalRep.twoPtrValue.ptr1; + } + if (procPtr == NULL || procPtr->iPtr != (Interp *) interp) { + result = tclLambdaType.setFromAnyProc(interp, objv[2]); + if (result != TCL_OK) { + return result; + } + procPtr = objv[2]->internalRep.twoPtrValue.ptr1; + } + + memset(&cmd, 0, sizeof(Command)); + nsObjPtr = objv[2]->internalRep.twoPtrValue.ptr2; + result = TclGetNamespaceFromObj(interp, nsObjPtr, &nsPtr); + if (result != TCL_OK) { + return result; + } + cmd.nsPtr = (Namespace *) nsPtr; + procPtr->cmdPtr = &cmd; + result = TclPushProcCallFrame(procPtr, interp, objc, objv, 1); + if (result != TCL_OK) { + return result; + } + TclPopStackFrame(interp); + codeObjPtr = procPtr->bodyPtr; + break; + } + case DISAS_PROC: + if (objc != 3) { + Tcl_WrongNumArgs(interp, 2, objv, "procName"); + return TCL_ERROR; + } + + procPtr = TclFindProc((Interp *) interp, TclGetString(objv[2])); + if (procPtr == NULL) { + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "\"%s\" isn't a procedure", TclGetString(objv[2]))); + Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "PROC", + TclGetString(objv[2]), NULL); + return TCL_ERROR; + } + + /* + * Compile (if uncompiled) and disassemble a procedure. + */ + + result = TclPushProcCallFrame(procPtr, interp, 2, objv+1, 1); + if (result != TCL_OK) { + return result; + } + TclPopStackFrame(interp); + codeObjPtr = procPtr->bodyPtr; + break; + case DISAS_SCRIPT: + /* + * Compile and disassemble a script. + */ + + if (objc != 3) { + Tcl_WrongNumArgs(interp, 2, objv, "script"); + return TCL_ERROR; + } + if ((objv[2]->typePtr != &tclByteCodeType) + && (TclSetByteCodeFromAny(interp, objv[2], NULL, NULL) != TCL_OK)) { + return TCL_ERROR; + } + codeObjPtr = objv[2]; + break; + + case DISAS_CLASS_METHOD: + if (objc != 4) { + Tcl_WrongNumArgs(interp, 2, objv, "className methodName"); + return TCL_ERROR; + } + + /* + * Look up the body of a class method. + */ + + oPtr = (Object *) Tcl_GetObjectFromObj(interp, objv[2]); + if (oPtr == NULL) { + return TCL_ERROR; + } + if (oPtr->classPtr == NULL) { + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "\"%s\" is not a class", TclGetString(objv[2]))); + Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "CLASS", + TclGetString(objv[2]), NULL); + return TCL_ERROR; + } + hPtr = Tcl_FindHashEntry(&oPtr->classPtr->classMethods, + (char *) objv[3]); + goto methodBody; + case DISAS_OBJECT_METHOD: + if (objc != 4) { + Tcl_WrongNumArgs(interp, 2, objv, "objectName methodName"); + return TCL_ERROR; + } + + /* + * Look up the body of an instance method. + */ + + oPtr = (Object *) Tcl_GetObjectFromObj(interp, objv[2]); + if (oPtr == NULL) { + return TCL_ERROR; + } + if (oPtr->methodsPtr == NULL) { + goto unknownMethod; + } + hPtr = Tcl_FindHashEntry(oPtr->methodsPtr, (char *) objv[3]); + + /* + * Compile (if necessary) and disassemble a method body. + */ + + methodBody: + if (hPtr == NULL) { + unknownMethod: + Tcl_SetObjResult(interp, Tcl_ObjPrintf( + "unknown method \"%s\"", TclGetString(objv[3]))); + Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "METHOD", + TclGetString(objv[3]), NULL); + return TCL_ERROR; + } + procPtr = TclOOGetProcFromMethod(Tcl_GetHashValue(hPtr)); + if (procPtr == NULL) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "body not available for this kind of method", -1)); + Tcl_SetErrorCode(interp, "TCL", "OPERATION", "DISASSEMBLE", + "METHODTYPE", NULL); + return TCL_ERROR; + } + if (procPtr->bodyPtr->typePtr != &tclByteCodeType) { + Command cmd; + + /* + * Yes, this is ugly, but we need to pass the namespace in to the + * compiler in two places. + */ + + cmd.nsPtr = (Namespace *) oPtr->namespacePtr; + procPtr->cmdPtr = &cmd; + result = TclProcCompileProc(interp, procPtr, procPtr->bodyPtr, + (Namespace *) oPtr->namespacePtr, "body of method", + TclGetString(objv[3])); + procPtr->cmdPtr = NULL; + if (result != TCL_OK) { + return result; + } + } + codeObjPtr = procPtr->bodyPtr; + break; + default: + CLANG_ASSERT(0); + } + + /* + * Do the actual disassembly. + */ + + if (((ByteCode *) codeObjPtr->internalRep.twoPtrValue.ptr1)->flags + & TCL_BYTECODE_PRECOMPILED) { + Tcl_SetObjResult(interp, Tcl_NewStringObj( + "may not disassemble prebuilt bytecode", -1)); + Tcl_SetErrorCode(interp, "TCL", "OPERATION", "DISASSEMBLE", + "BYTECODE", NULL); + return TCL_ERROR; + } + Tcl_SetObjResult(interp, TclDisassembleByteCodeObj(codeObjPtr)); + return TCL_OK; +} + +/* + * Local Variables: + * mode: c + * c-basic-offset: 4 + * fill-column: 78 + * tab-width: 8 + * End: + */ diff --git a/generic/tclProc.c b/generic/tclProc.c index 18985a1..23d8e70 100644 --- a/generic/tclProc.c +++ b/generic/tclProc.c @@ -15,7 +15,6 @@ #include "tclInt.h" #include "tclCompile.h" -#include "tclOOInt.h" /* * Variables that are part of the [apply] command implementation and which @@ -41,9 +40,6 @@ static void InitResolvedLocals(Tcl_Interp *interp, ByteCode *codePtr, Var *defPtr, Namespace *nsPtr); static void InitLocalCache(Proc *procPtr); -static int PushProcCallFrame(ClientData clientData, - register Tcl_Interp *interp, int objc, - Tcl_Obj *const objv[], int isLambda); static void ProcBodyDup(Tcl_Obj *srcPtr, Tcl_Obj *dupPtr); static void ProcBodyFree(Tcl_Obj *objPtr); static int ProcWrongNumArgs(Tcl_Interp *interp, int skip); @@ -95,7 +91,7 @@ static const Tcl_ObjType levelReferenceType = { * will execute within. */ -static const Tcl_ObjType lambdaType = { +const Tcl_ObjType tclLambdaType = { "lambdaExpr", /* name */ FreeLambdaInternalRep, /* freeIntRepProc */ DupLambdaInternalRep, /* dupIntRepProc */ @@ -221,7 +217,7 @@ Tcl_ProcObjCmd( * * This code is nearly identical to the #280 code in SetLambdaFromAny, see * this file. The differences are the different index of the body in the - * line array of the context, and the lamdba code requires some special + * line array of the context, and the lambda code requires some special * processing. Find a way to factor the common elements into a single * function. */ @@ -1571,7 +1567,7 @@ InitArgsAndLocals( /* *---------------------------------------------------------------------- * - * PushProcCallFrame -- + * TclPushProcCallFrame -- * * Compiles a proc body if necessary, then pushes a CallFrame suitable * for executing it. @@ -1586,8 +1582,8 @@ InitArgsAndLocals( *---------------------------------------------------------------------- */ -static int -PushProcCallFrame( +int +TclPushProcCallFrame( ClientData clientData, /* Record describing procedure to be * interpreted. */ register Tcl_Interp *interp,/* Interpreter in which procedure was @@ -1708,7 +1704,7 @@ TclNRInterpProc( * procedure. */ Tcl_Obj *const objv[]) /* Argument value objects. */ { - int result = PushProcCallFrame(clientData, interp, objc, objv, + int result = TclPushProcCallFrame(clientData, interp, objc, objv, /*isLambda*/ 0); if (result != TCL_OK) { @@ -2451,7 +2447,7 @@ DupLambdaInternalRep( procPtr->refCount++; Tcl_IncrRefCount(nsObjPtr); - copyPtr->typePtr = &lambdaType; + copyPtr->typePtr = &tclLambdaType; } static void @@ -2488,7 +2484,7 @@ SetLambdaFromAny( /* * Convert objPtr to list type first; if it cannot be converted, or if its - * length is not 2, then it cannot be converted to lambdaType. + * length is not 2, then it cannot be converted to tclLambdaType. */ result = TclListObjGetElements(NULL, objPtr, &objc, &objv); @@ -2634,14 +2630,14 @@ SetLambdaFromAny( /* * Free the list internalrep of objPtr - this will free argsPtr, but * bodyPtr retains a reference from the Proc structure. Then finish the - * conversion to lambdaType. + * conversion to tclLambdaType. */ TclFreeIntRep(objPtr); objPtr->internalRep.twoPtrValue.ptr1 = procPtr; objPtr->internalRep.twoPtrValue.ptr2 = nsObjPtr; - objPtr->typePtr = &lambdaType; + objPtr->typePtr = &tclLambdaType; return TCL_OK; } @@ -2692,12 +2688,12 @@ TclNRApplyObjCmd( } /* - * Set lambdaPtr, convert it to lambdaType in the current interp if + * Set lambdaPtr, convert it to tclLambdaType in the current interp if * necessary. */ lambdaPtr = objv[1]; - if (lambdaPtr->typePtr == &lambdaType) { + if (lambdaPtr->typePtr == &tclLambdaType) { procPtr = lambdaPtr->internalRep.twoPtrValue.ptr1; } @@ -2775,7 +2771,7 @@ TclNRApplyObjCmd( } extraPtr->isRootEnsemble = isRootEnsemble; - result = PushProcCallFrame(procPtr, interp, objc, objv, 1); + result = TclPushProcCallFrame(procPtr, interp, objc, objv, 1); if (result == TCL_OK) { TclNRAddCallback(interp, ApplyNR2, extraPtr, NULL, NULL, NULL); result = TclNRInterpProcCore(interp, objv[1], 2, &MakeLambdaError); @@ -2835,234 +2831,6 @@ MakeLambdaError( } /* - *---------------------------------------------------------------------- - * - * Tcl_DisassembleObjCmd -- - * - * Implementation of the "::tcl::unsupported::disassemble" command. This - * command is not documented, but will disassemble procedures, lambda - * terms and general scripts. Note that will compile terms if necessary - * in order to disassemble them. - * - *---------------------------------------------------------------------- - */ - -int -Tcl_DisassembleObjCmd( - ClientData dummy, /* Not used. */ - Tcl_Interp *interp, /* Current interpreter. */ - int objc, /* Number of arguments. */ - Tcl_Obj *const objv[]) /* Argument objects. */ -{ - static const char *const types[] = { - "lambda", "method", "objmethod", "proc", "script", NULL - }; - enum Types { - DISAS_LAMBDA, DISAS_CLASS_METHOD, DISAS_OBJECT_METHOD, DISAS_PROC, - DISAS_SCRIPT - }; - int idx, result; - Tcl_Obj *codeObjPtr = NULL; - Proc *procPtr = NULL; - Tcl_HashEntry *hPtr; - Object *oPtr; - - if (objc < 2) { - Tcl_WrongNumArgs(interp, 1, objv, "type ..."); - return TCL_ERROR; - } - if (Tcl_GetIndexFromObj(interp, objv[1], types, "type", 0, &idx)!=TCL_OK){ - return TCL_ERROR; - } - - switch ((enum Types) idx) { - case DISAS_LAMBDA: { - Command cmd; - Tcl_Obj *nsObjPtr; - Tcl_Namespace *nsPtr; - - /* - * Compile (if uncompiled) and disassemble a lambda term. - */ - - if (objc != 3) { - Tcl_WrongNumArgs(interp, 2, objv, "lambdaTerm"); - return TCL_ERROR; - } - if (objv[2]->typePtr == &lambdaType) { - procPtr = objv[2]->internalRep.twoPtrValue.ptr1; - } - if (procPtr == NULL || procPtr->iPtr != (Interp *) interp) { - result = SetLambdaFromAny(interp, objv[2]); - if (result != TCL_OK) { - return result; - } - procPtr = objv[2]->internalRep.twoPtrValue.ptr1; - } - - memset(&cmd, 0, sizeof(Command)); - nsObjPtr = objv[2]->internalRep.twoPtrValue.ptr2; - result = TclGetNamespaceFromObj(interp, nsObjPtr, &nsPtr); - if (result != TCL_OK) { - return result; - } - cmd.nsPtr = (Namespace *) nsPtr; - procPtr->cmdPtr = &cmd; - result = PushProcCallFrame(procPtr, interp, objc, objv, 1); - if (result != TCL_OK) { - return result; - } - TclPopStackFrame(interp); - codeObjPtr = procPtr->bodyPtr; - break; - } - case DISAS_PROC: - if (objc != 3) { - Tcl_WrongNumArgs(interp, 2, objv, "procName"); - return TCL_ERROR; - } - - procPtr = TclFindProc((Interp *) interp, TclGetString(objv[2])); - if (procPtr == NULL) { - Tcl_SetObjResult(interp, Tcl_ObjPrintf( - "\"%s\" isn't a procedure", TclGetString(objv[2]))); - Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "PROC", - TclGetString(objv[2]), NULL); - return TCL_ERROR; - } - - /* - * Compile (if uncompiled) and disassemble a procedure. - */ - - result = PushProcCallFrame(procPtr, interp, 2, objv+1, 1); - if (result != TCL_OK) { - return result; - } - TclPopStackFrame(interp); - codeObjPtr = procPtr->bodyPtr; - break; - case DISAS_SCRIPT: - /* - * Compile and disassemble a script. - */ - - if (objc != 3) { - Tcl_WrongNumArgs(interp, 2, objv, "script"); - return TCL_ERROR; - } - if ((objv[2]->typePtr != &tclByteCodeType) - && (TclSetByteCodeFromAny(interp, objv[2], NULL, NULL) != TCL_OK)) { - return TCL_ERROR; - } - codeObjPtr = objv[2]; - break; - - case DISAS_CLASS_METHOD: - if (objc != 4) { - Tcl_WrongNumArgs(interp, 2, objv, "className methodName"); - return TCL_ERROR; - } - - /* - * Look up the body of a class method. - */ - - oPtr = (Object *) Tcl_GetObjectFromObj(interp, objv[2]); - if (oPtr == NULL) { - return TCL_ERROR; - } - if (oPtr->classPtr == NULL) { - Tcl_SetObjResult(interp, Tcl_ObjPrintf( - "\"%s\" is not a class", TclGetString(objv[2]))); - Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "CLASS", - TclGetString(objv[2]), NULL); - return TCL_ERROR; - } - hPtr = Tcl_FindHashEntry(&oPtr->classPtr->classMethods, - (char *) objv[3]); - goto methodBody; - case DISAS_OBJECT_METHOD: - if (objc != 4) { - Tcl_WrongNumArgs(interp, 2, objv, "objectName methodName"); - return TCL_ERROR; - } - - /* - * Look up the body of an instance method. - */ - - oPtr = (Object *) Tcl_GetObjectFromObj(interp, objv[2]); - if (oPtr == NULL) { - return TCL_ERROR; - } - if (oPtr->methodsPtr == NULL) { - goto unknownMethod; - } - hPtr = Tcl_FindHashEntry(oPtr->methodsPtr, (char *) objv[3]); - - /* - * Compile (if necessary) and disassemble a method body. - */ - - methodBody: - if (hPtr == NULL) { - unknownMethod: - Tcl_SetObjResult(interp, Tcl_ObjPrintf( - "unknown method \"%s\"", TclGetString(objv[3]))); - Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "METHOD", - TclGetString(objv[3]), NULL); - return TCL_ERROR; - } - procPtr = TclOOGetProcFromMethod(Tcl_GetHashValue(hPtr)); - if (procPtr == NULL) { - Tcl_SetObjResult(interp, Tcl_NewStringObj( - "body not available for this kind of method", -1)); - Tcl_SetErrorCode(interp, "TCL", "OPERATION", "DISASSEMBLE", - "METHODTYPE", NULL); - return TCL_ERROR; - } - if (procPtr->bodyPtr->typePtr != &tclByteCodeType) { - Command cmd; - - /* - * Yes, this is ugly, but we need to pass the namespace in to the - * compiler in two places. - */ - - cmd.nsPtr = (Namespace *) oPtr->namespacePtr; - procPtr->cmdPtr = &cmd; - result = TclProcCompileProc(interp, procPtr, procPtr->bodyPtr, - (Namespace *) oPtr->namespacePtr, "body of method", - TclGetString(objv[3])); - procPtr->cmdPtr = NULL; - if (result != TCL_OK) { - return result; - } - } - codeObjPtr = procPtr->bodyPtr; - break; - default: - CLANG_ASSERT(0); - } - - /* - * Do the actual disassembly. - */ - - if (((ByteCode *) codeObjPtr->internalRep.twoPtrValue.ptr1)->flags - & TCL_BYTECODE_PRECOMPILED) { - Tcl_SetObjResult(interp, Tcl_NewStringObj( - "may not disassemble prebuilt bytecode", -1)); - Tcl_SetErrorCode(interp, "TCL", "OPERATION", "DISASSEMBLE", - "BYTECODE", NULL); - return TCL_ERROR; - } - Tcl_SetObjResult(interp, TclDisassembleByteCodeObj(codeObjPtr)); - return TCL_OK; -} - -/* * Local Variables: * mode: c * c-basic-offset: 4 diff --git a/unix/Makefile.in b/unix/Makefile.in index 3e4a6f6..ab351ca 100644 --- a/unix/Makefile.in +++ b/unix/Makefile.in @@ -294,7 +294,7 @@ GENERIC_OBJS = regcomp.o regexec.o regfree.o regerror.o tclAlloc.o \ tclAssembly.o tclAsync.o tclBasic.o tclBinary.o tclCkalloc.o \ tclClock.o tclCmdAH.o tclCmdIL.o tclCmdMZ.o \ tclCompCmds.o tclCompCmdsGR.o tclCompCmdsSZ.o tclCompExpr.o \ - tclCompile.o tclConfig.o tclDate.o tclDictObj.o \ + tclCompile.o tclConfig.o tclDate.o tclDictObj.o tclDisassemble.o \ tclEncoding.o tclEnsemble.o \ tclEnv.o tclEvent.o tclExecute.o tclFCmd.o tclFileName.o tclGet.o \ tclHash.o tclHistory.o tclIndexObj.o tclInterp.o tclIO.o tclIOCmd.o \ @@ -402,6 +402,7 @@ GENERIC_SRCS = \ $(GENERIC_DIR)/tclConfig.c \ $(GENERIC_DIR)/tclDate.c \ $(GENERIC_DIR)/tclDictObj.c \ + $(GENERIC_DIR)/tclDisassemble.c \ $(GENERIC_DIR)/tclEncoding.c \ $(GENERIC_DIR)/tclEnsemble.c \ $(GENERIC_DIR)/tclEnv.c \ @@ -1097,6 +1098,9 @@ tclConfig.o: $(GENERIC_DIR)/tclConfig.c tclDictObj.o: $(GENERIC_DIR)/tclDictObj.c $(MATHHDRS) $(CC) -c $(CC_SWITCHES) $(GENERIC_DIR)/tclDictObj.c +tclDisassemble.o: $(GENERIC_DIR)/tclDisassemble.c $(COMPILEHDR) + $(CC) -c $(CC_SWITCHES) $(GENERIC_DIR)/tclDisassemble.c + tclEncoding.o: $(GENERIC_DIR)/tclEncoding.c $(CC) -c $(CC_SWITCHES) $(GENERIC_DIR)/tclEncoding.c @@ -1562,10 +1566,9 @@ tclUnixThrd.o: $(UNIX_DIR)/tclUnixThrd.c tclUnixTime.o: $(UNIX_DIR)/tclUnixTime.c $(CC) -c $(CC_SWITCHES) $(UNIX_DIR)/tclUnixTime.c +TCL_LOCATIONS=-DTCL_LIBRARY="\"${TCL_LIBRARY}\"" -DTCL_PACKAGE_PATH="\"${TCL_PACKAGE_PATH}\"" tclUnixInit.o: $(UNIX_DIR)/tclUnixInit.c tclConfig.sh - $(CC) -c $(CC_SWITCHES) -DTCL_LIBRARY=\"${TCL_LIBRARY}\" \ - -DTCL_PACKAGE_PATH="\"${TCL_PACKAGE_PATH}\"" \ - $(UNIX_DIR)/tclUnixInit.c + $(CC) -c $(CC_SWITCHES) $(TCL_LOCATIONS) $(UNIX_DIR)/tclUnixInit.c tclUnixCompat.o: $(UNIX_DIR)/tclUnixCompat.c $(CC) -c $(CC_SWITCHES) $(UNIX_DIR)/tclUnixCompat.c diff --git a/win/Makefile.in b/win/Makefile.in index 18993fe..dc54d59 100644 --- a/win/Makefile.in +++ b/win/Makefile.in @@ -232,6 +232,7 @@ GENERIC_OBJS = \ tclConfig.$(OBJEXT) \ tclDate.$(OBJEXT) \ tclDictObj.$(OBJEXT) \ + tclDisassemble.$(OBJEXT) \ tclEncoding.$(OBJEXT) \ tclEnsemble.$(OBJEXT) \ tclEnv.$(OBJEXT) \ diff --git a/win/makefile.bc b/win/makefile.bc index 0b17cea..31a927e 100644 --- a/win/makefile.bc +++ b/win/makefile.bc @@ -207,6 +207,7 @@ TCLOBJS = \ $(TMPDIR)\tclConfig.obj \ $(TMPDIR)\tclDate.obj \ $(TMPDIR)\tclDictObj.obj \ + $(TMPDIR)\tclDisassemble.obj \ $(TMPDIR)\tclEncoding.obj \ $(TMPDIR)\tclEnsemble.obj \ $(TMPDIR)\tclEnv.obj \ @@ -587,3 +588,7 @@ clean: -@$(RM) $(TMPDIR)\*.exe -@$(RMDIR) $(OUTDIR) -@$(RMDIR) $(TMPDIR) + +# Local Variables: +# mode: makefile +# End: diff --git a/win/makefile.vc b/win/makefile.vc index cddb253..09a1135 100644 --- a/win/makefile.vc +++ b/win/makefile.vc @@ -1,4 +1,4 @@ -#------------------------------------------------------------- -*- makefile -*- +#------------------------------------------------------------- # makefile.vc -- # # Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) @@ -281,6 +281,7 @@ COREOBJS = \ $(TMP_DIR)\tclConfig.obj \ $(TMP_DIR)\tclDate.obj \ $(TMP_DIR)\tclDictObj.obj \ + $(TMP_DIR)\tclDisassemble.obj \ $(TMP_DIR)\tclEncoding.obj \ $(TMP_DIR)\tclEnsemble.obj \ $(TMP_DIR)\tclEnv.obj \ @@ -1221,3 +1222,7 @@ realclean: hose hose: @echo Hosing $(OUT_DIR)\* ... @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) + +# Local Variables: +# mode: makefile +# End: -- cgit v0.12