'\"
'\" Copyright (c) 1996-1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
.TH Tcl_IntObj 3 8.5 Tcl "Tcl Library Procedures"
.so man.macros
.BS
.SH NAME
Tcl_NewIntObj, Tcl_NewLongObj, Tcl_NewWideIntObj, Tcl_SetIntObj, Tcl_SetLongObj, Tcl_SetWideIntObj, Tcl_GetIntFromObj, Tcl_GetIntForIndex, Tcl_GetLongFromObj, Tcl_GetWideIntFromObj, Tcl_GetWideUIntFromObj, Tcl_NewBignumObj, Tcl_SetBignumObj, Tcl_GetBignumFromObj, Tcl_TakeBignumFromObj \- manipulate Tcl values as integers
.SH SYNOPSIS
.nf
\fB#include <tcl.h>\fR
.sp
Tcl_Obj *
\fBTcl_NewIntObj\fR(\fIintValue\fR)
.sp
Tcl_Obj *
\fBTcl_NewLongObj\fR(\fIlongValue\fR)
.sp
Tcl_Obj *
\fBTcl_NewWideIntObj\fR(\fIwideValue\fR)
.sp
\fBTcl_SetIntObj\fR(\fIobjPtr, intValue\fR)
.sp
\fBTcl_SetLongObj\fR(\fIobjPtr, longValue\fR)
.sp
\fBTcl_SetWideIntObj\fR(\fIobjPtr, wideValue\fR)
.sp
int
\fBTcl_GetIntFromObj\fR(\fIinterp, objPtr, intPtr\fR)
.sp
int
\fBTcl_GetIntForIndex\fR(\fIinterp, objPtr, endValue, indexPtr\fR)
.sp
int
\fBTcl_GetLongFromObj\fR(\fIinterp, objPtr, longPtr\fR)
.sp
int
\fBTcl_GetWideIntFromObj\fR(\fIinterp, objPtr, widePtr\fR)
.sp
int
\fBTcl_GetWideUIntFromObj\fR(\fIinterp, objPtr, uwidePtr\fR)
.sp
.sp
\fB#include <tclTomMath.h>\fR
.sp
Tcl_Obj *
\fBTcl_NewBignumObj\fR(\fIbigValue\fR)
.sp
\fBTcl_SetBignumObj\fR(\fIobjPtr, bigValue\fR)
.sp
int
\fBTcl_GetBignumFromObj\fR(\fIinterp, objPtr, bigValue\fR)
.sp
int
\fBTcl_TakeBignumFromObj\fR(\fIinterp, objPtr, bigValue\fR)
.sp
int
\fBTcl_InitBignumFromDouble\fR(\fIinterp, doubleValue, bigValue\fR)
.SH ARGUMENTS
.AS Tcl_WideInt doubleValue in/out
.AP size_t endValue in
\fBTcl_GetIntForIndex\fR will return this when the input value is "end".
.AP int intValue in
Integer value used to initialize or set a Tcl value.
.AP long longValue in
Long integer value used to initialize or set a Tcl value.
.AP Tcl_WideInt wideValue in
Wide integer value used to initialize or set a Tcl value.
.AP Tcl_Obj *objPtr in/out
For \fBTcl_SetIntObj\fR, \fBTcl_SetLongObj\fR, \fBTcl_SetWideIntObj\fR,
and \fBTcl_SetBignumObj\fR, this points to the value in which to store an
integral value.  For \fBTcl_GetIntFromObj\fR, \fBTcl_GetLongFromObj\fR,
\fBTcl_GetWideIntFromObj\fR, \fBTcl_GetBignumFromObj\fR, and
\fBTcl_TakeBignumFromObj\fR, this refers to the value from which
to retrieve an integral value.
.AP Tcl_Interp *interp in/out
When non-NULL, an error message is left here when integral value
retrieval fails.
.AP int *intPtr out
Points to place to store the integer value retrieved from \fIobjPtr\fR.
.AP long *longPtr out
Points to place to store the long integer value retrieved from \fIobjPtr\fR.
.AP size_t *indexPtr out
Points to place to store the size_t value retrieved from \fIobjPtr\fR.
.AP Tcl_WideInt *widePtr out
Points to place to store the wide integer value retrieved from \fIobjPtr\fR.
.AP Tcl_WideUInt *uwidePtr out
Points to place to store the unsigned wide integer value retrieved from \fIobjPtr\fR.
.AP mp_int *bigValue in/out
Points to a multi-precision integer structure declared by the LibTomMath
library.
.AP double doubleValue in
Double value from which the integer part is determined and
used to initialize a multi-precision integer value.
.BE
.SH DESCRIPTION
.PP
These procedures are used to create, modify, and read Tcl values
that hold integral values.
.PP
The different routines exist to accommodate different integral types in C
with which values might be exchanged.  The C integral types for which Tcl
provides value exchange routines are \fBint\fR, \fBlong int\fR,
\fBTcl_WideInt\fR, and \fBmp_int\fR.  The \fBint\fR and \fBlong int\fR types
are provided by the C language standard.  The \fBTcl_WideInt\fR type is a
typedef defined to be whatever signed integral type covers at least the
64-bit integer range (-9223372036854775808 to 9223372036854775807).  Depending
on the platform and the C compiler, the actual type might be
\fBlong long int\fR, or something else.
The \fBmp_int\fR type is a multiple-precision integer type defined
by the LibTomMath multiple-precision integer library.
.PP
The \fBTcl_NewIntObj\fR, \fBTcl_NewLongObj\fR, \fBTcl_NewWideIntObj\fR,
and \fBTcl_NewBignumObj\fR routines each create and return a new
Tcl value initialized to the integral value of the argument.  The
returned Tcl value is unshared.
.PP
The \fBTcl_SetIntObj\fR, \fBTcl_SetLongObj\fR, \fBTcl_SetWideIntObj\fR,
and \fBTcl_SetBignumObj\fR routines each set the value of an existing
Tcl value pointed to by \fIobjPtr\fR to the integral value provided
by the other argument.  The \fIobjPtr\fR argument must point to an
unshared Tcl value.  Any attempt to set the value of a shared Tcl value
violates Tcl's copy-on-write policy.  Any existing string representation
or internal representation in the unshared Tcl value will be freed
as a consequence of setting the new value.
.PP
The \fBTcl_GetIntForIndex\fR routine attempts to retrieve an index
value from the Tcl value \fIobjPtr\fR.  If the attempt succeeds,
then \fBTCL_OK\fR is returned, and the value is written to the
storage provided by the caller.  The attempt might fail if
\fIobjPtr\fR does not hold an index value.  If the attempt fails,
then \fBTCL_ERROR\fR is returned, and if \fIinterp\fR is non-NULL,
an error message is left in \fIinterp\fR.  The \fBTcl_ObjType\fR
of \fIobjPtr\fR may be changed to make subsequent calls to the
same routine more efficient.
.PP
The \fBTcl_GetIntFromObj\fR, \fBTcl_GetLongFromObj\fR,
\fBTcl_GetWideIntFromObj\fR, \fBTcl_GetBignumFromObj\fR, and
\fBTcl_TakeBignumFromObj\fR routines attempt to retrieve an integral
value of the appropriate type from the Tcl value \fIobjPtr\fR.  If the
attempt succeeds, then \fBTCL_OK\fR is returned, and the value is
written to the storage provided by the caller.  The attempt might
fail if \fIobjPtr\fR does not hold an integral value, or if the
value exceeds the range of the target type.  If the attempt fails,
then \fBTCL_ERROR\fR is returned, and if \fIinterp\fR is non-NULL,
an error message is left in \fIinterp\fR.  The \fBTcl_ObjType\fR
of \fIobjPtr\fR may be changed to make subsequent calls to the
same routine more efficient. Unlike the other functions,
\fBTcl_TakeBignumFromObj\fR may set the content of the Tcl value
\fIobjPtr\fR to an empty string in the process of retrieving the
multiple-precision integer value.
.PP
The choice between \fBTcl_GetBignumFromObj\fR and
\fBTcl_TakeBignumFromObj\fR is governed by how the caller will
continue to use \fIobjPtr\fR.  If after the \fBmp_int\fR value
is retrieved from \fIobjPtr\fR, the caller will make no more
use of \fIobjPtr\fR, then using \fBTcl_TakeBignumFromObj\fR
permits Tcl to detect when an unshared \fIobjPtr\fR permits the
value to be moved instead of copied, which should be more efficient.
If anything later in the caller requires
\fIobjPtr\fR to continue to hold the same value, then
\fBTcl_GetBignumFromObj\fR must be chosen.
.PP
The \fBTcl_InitBignumFromDouble\fR routine is a utility procedure
that extracts the integer part of \fIdoubleValue\fR and stores that
integer value in the \fBmp_int\fR value \fIbigValue\fR.
.SH "REFERENCE COUNT MANAGEMENT"
.PP
\fBTcl_NewIntObj\fR, \fBTcl_NewLongObj\fR, \fBTcl_NewWideIntObj\fR, and
\fBTcl_NewBignumObj\fR always return a zero-reference object, much like
\fBTcl_NewObj\fR.
.PP
\fBTcl_SetIntObj\fR, \fBTcl_SetLongObj\fR, \fBTcl_SetWideIntObj\fR, and
\fBTcl_SetBignumObj\fR do not modify the reference count of their \fIobjPtr\fR
arguments, but do require that the object be unshared.
.PP
\fBTcl_GetIntFromObj\fR, \fBTcl_GetIntForIndex\fR, \fBTcl_GetLongFromObj\fR,
\fBTcl_GetWideIntFromObj\fR, \fBTcl_GetBignumFromObj\fR, and
\fBTcl_TakeBignumFromObj\fR do not modify the reference count of their
\fIobjPtr\fR arguments; they only read. Note however that this function may
set the interpreter result; if that is the only place that is holding a
reference to the object, it will be deleted. Also note that if
\fBTcl_TakeBignumFromObj\fR is given an unshared value, the value of that
object may be modified; it is intended to be used when the value is
.QW consumed
by the operation at this point.

.SH "SEE ALSO"
Tcl_NewObj, Tcl_DecrRefCount, Tcl_IncrRefCount, Tcl_GetObjResult
.SH KEYWORDS
integer, integer value, integer type, internal representation, value,
value type, string representation