'\" '\" Copyright (c) 1993 The Regents of the University of California. '\" Copyright (c) 1994-2000 Sun Microsystems, Inc. '\" Copyright (c) 2005 by Kevin B. Kenny . All rights reserved '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. '\" .TH expr n 8.5 Tcl "Tcl Built-In Commands" .so man.macros .BS '\" Note: do not modify the .SH NAME line immediately below! .SH NAME expr \- Evaluate an expression .SH SYNOPSIS \fBexpr \fIarg \fR?\fIarg arg ...\fR? .BE .SH DESCRIPTION .PP Concatenates \fIarg\fRs, separated by a space, into an expression, and evaluates that expression, returning its value. The operators permitted in an expression include a subset of the operators permitted in C expressions. For those operators common to both Tcl and C, Tcl applies the same meaning and precedence as the corresponding C operators. The value of an expression is often a numeric result, either an integer or a floating-point value, but may also be a non-numeric value. For example, the expression .PP .CS \fBexpr\fR 8.2 + 6 .CE .PP evaluates to 14.2. Expressions differ from C expressions in the way that operands are specified. Expressions also support non-numeric operands, string comparisons, and some additional operators not found in C. .PP When an expression evaluates to an integer, the value is the decimal form of the integer, and when an expression evaluates to a floating-point number, the value is the form produced by the \fB%g\fR format specifier of Tcl's \fBformat\fR command. .SS OPERANDS .PP An expression consists of a combination of operands, operators, parentheses and commas, possibly with whitespace between any of these elements, which is ignored. An integer operand may be specified in decimal (the normal case, the optional first two characters are \fB0d\fR), binary (the first two characters are \fB0b\fR), octal (the first two characters are \fB0o\fR), or hexadecimal (the first two characters are \fB0x\fR) form. A floating-point number may be specified in any of several common decimal formats, and may use the decimal point \fB.\fR, \fBe\fR or \fBE\fR for scientific notation, and the sign characters \fB+\fR and \fB\-\fR. The following are all valid floating-point numbers: 2.1, 3., 6e4, 7.91e+16. The strings \fBInf\fR and \fBNaN\fR, in any combination of case, are also recognized as floating point values. An operand that doesn't have a numeric interpretation must be quoted with either braces or with double quotes. .PP An operand may be specified in any of the following ways: .IP [1] As a numeric value, either integer or floating-point. .IP [2] As a boolean value, using any form understood by \fBstring is\fR \fBboolean\fR. .IP [3] As a variable, using standard \fB$\fR notation. The value of the variable is then the value of the operand. .IP [4] As a string enclosed in double-quotes. Backslash, variable, and command substitution are performed as described in \fBTcl\fR. .IP [5] As a string enclosed in braces. The operand is treated as a braced value as described in \fBTcl\fR. .IP [6] As a Tcl command enclosed in brackets. Command substitution is performed as described in \fBTcl\fR. .IP [7] As a mathematical function such as \fBsin($x)\fR, whose arguments have any of the above forms for operands. See \fBMATH FUNCTIONS\fR below for a discussion of how mathematical functions are handled. .PP Because \fBexpr\fR parses and performs substitutions on values that have already been parsed and substituted by \fBTcl\fR, it is usually best to enclose expressions in braces to avoid the first round of substitutions by \fBTcl\fR. .PP Below are some examples of simple expressions where the value of \fBa\fR is 3 and the value of \fBb\fR is 6. The command on the left side of each line produces the value on the right side. .PP .CS .ta 6c \fBexpr\fR 3.1 + $a \fI6.1\fR \fBexpr\fR 2 + "$a.$b" \fI5.6\fR \fBexpr\fR 4*[llength "6 2"] \fI8\fR \fBexpr\fR {{word one} < "word $a"} \fI0\fR .CE .SS OPERATORS .PP For operators having both a numeric mode and a string mode, the numeric mode is chosen when all operands have a numeric interpretation. The integer interpretation of an operand is preferred over the floating-point interpretation. To ensure string operations on arbitrary values it is generally a good idea to use \fBeq\fR, \fBne\fR, or the \fBstring\fR command instead of more versatile operators such as \fB==\fR. .PP Unless otherwise specified, operators accept non-numeric operands. The value of a boolean operation is 1 if true, 0 otherwise. See also \fBstring is\fR \fBboolean\fR. The valid operators, most of which are also available as commands in the \fBtcl::mathop\fR namespace (see \fBmathop\fR(n)), are listed below, grouped in decreasing order of precedence: .TP 20 \fB\-\0\0+\0\0~\0\0!\fR . Unary minus, unary plus, bit-wise NOT, logical NOT. These operators may only be applied to numeric operands, and bit-wise NOT may only be applied to integers. .TP 20 \fB**\fR . Exponentiation. Valid for numeric operands. .TP 20 \fB*\0\0/\0\0%\fR . Multiply and divide, which are valid for numeric operands, and remainder, which is valid for integers. The remainder, an absolute value smaller than the absolute value of the divisor, has the same sign as the divisor. .RS .PP When applied to integers, division and remainder can be considered to partition the number line into a sequence of adjacent non-overlapping pieces, where each piece is the size of the divisor; the quotient identifies which piece the dividend lies within, and the remainder identifies where within that piece the dividend lies. A consequence of this is that the result of .QW "-57 \fB/\fR 10" is always -6, and the result of .QW "-57 \fB%\fR 10" is always 3. .RE .TP 20 \fB+\0\0\-\fR . Add and subtract. Valid for numeric operands. .TP 20 \fB<<\0\0>>\fR . Left and right shift. Valid for integers. A right shift always propagates the sign bit. .TP 20 \fB<\0\0>\0\0<=\0\0>=\fR . Boolean less than, greater than, less than or equal, and greater than or equal. .TP 20 \fB==\0\0!=\fR . Boolean equal and not equal. .TP 20 \fBeq\0\0ne\fR . Boolean string equal and string not equal. .TP 20 \fBin\0\0ni\fR . List containment and negated list containment. The first argument is interpreted as a string, the second as a list. \fBin\fR tests for membership in the list, and \fBni\fR is the inverse. .TP 20 \fB&\fR . Bit-wise AND. Valid for integer operands. .TP 20 \fB^\fR . Bit-wise exclusive OR. Valid for integer operands. .TP 20 \fB|\fR . Bit-wise OR. Valid for integer operands. .TP 20 \fB&&\fR . Logical AND. If both operands are true, the result is 1, or 0 otherwise. .TP 20 \fB||\fR . Logical OR. If both operands are false, the result is 0, or 1 otherwise. .TP 20 \fIx\fB?\fIy\fB:\fIz\fR . If-then-else, as in C. If \fIx\fR is false , the result is the value of \fIy\fR. Otherwise the result is the value of \fIz\fR. .PP The exponentiation operator promotes types in the same way that the multiply and divide operators do, and the result is is the same as the result of \fBpow\fR. Exponentiation groups right-to-left within a precedence level. Other binary operators group left-to-right. For example, the value of .PP .CS \fBexpr\fR {4*2 < 7} .CE .PP is 0, while the value of .PP .CS \fBexpr\fR {2**3**2} .CE .PP is 512. .PP As in C, \fB&&\fR, \fB||\fR, and \fB?:\fR feature .QW "lazy evaluation" , which means that operands are not evaluated if they are not needed to determine the outcome. For example, in .PP .CS \fBexpr\fR {$v ? [a] : [b]} .CE .PP only one of \fB[a]\fR or \fB[b]\fR is evaluated, depending on the value of \fB$v\fR. This is not true of the normal Tcl parser, so it is normally recommended to enclose the arguments to \fBexpr\fR in braces. Without braces, as in \fBexpr\fR $v ? [a] : [b] both \fB[a]\fR and \fB[b]\fR are evaluated before \fBexpr\fR is even called. .PP For more details on the results produced by each operator, see the documentation for C. .SS "MATH FUNCTIONS" .PP A mathematical function such as \fBsin($x)\fR is replaced with a call to an ordinary Tcl command in the \fBtcl::mathfunc\fR namespace. The evaluation of an expression such as .PP .CS \fBexpr\fR {sin($x+$y)} .CE .PP is the same in every way as the evaluation of .PP .CS \fBexpr\fR {[tcl::mathfunc::sin [\fBexpr\fR {$x+$y}]]} .CE .PP which in turn is the same as the evaluation of .PP .CS tcl::mathfunc::sin [\fBexpr\fR {$x+$y}] .CE .PP \fBtcl::mathfunc::sin\fR is resolved as described in \fBNAMESPACE RESOLUTION\fR in the \fBnamespace\fR(n) documentation. Given the default value of \fBnamespace path\fR, \fB[namespace current]::tcl::mathfunc::sin\fR or \fB::tcl::mathfunc::sin\fR are the typical resolutions. .PP As in C, a mathematical function may accept multiple arguments separated by commas. Thus, .PP .CS \fBexpr\fR {hypot($x,$y)} .CE .PP becomes .PP .CS tcl::mathfunc::hypot $x $y .CE .PP See the \fBmathfunc\fR(n) documentation for the math functions that are available by default. .SS "TYPES, OVERFLOW, AND PRECISION" .PP When needed to guarantee exact performance, internal computations involving integers use the LibTomMath multiple precision integer library. In Tcl releases prior to 8.5, integer calculations were performed using one of the C types \fIlong int\fR or \fITcl_WideInt\fR, causing implicit range truncation in those calculations where values overflowed the range of those types. Any code that relied on these implicit truncations should instead call \fBint()\fR or \fBwide()\fR, which do truncate. .PP Internal floating-point computations are performed using the \fIdouble\fR C type. When converting a string to floating-point value, exponent overflow is detected and results in the \fIdouble\fR value of \fBInf\fR or \fB\-Inf\fR as appropriate. Floating-point overflow and underflow are detected to the degree supported by the hardware, which is generally fairly reliable. .PP Conversion among internal representations for integer, floating-point, and string operands is done automatically as needed. For arithmetic computations, integers are used until some floating-point number is introduced, after which floating-point values are used. For example, .PP .CS \fBexpr\fR {5 / 4} .CE .PP returns 1, while .PP .CS \fBexpr\fR {5 / 4.0} \fBexpr\fR {5 / ( [string length "abcd"] + 0.0 )} .CE .PP both return 1.25. A floating-point result can be distinguished from an integer result by the presence of either .QW \fB.\fR or .QW \fBe\fR .PP . For example, .PP .CS \fBexpr\fR {20.0/5.0} .CE .PP returns \fB4.0\fR, not \fB4\fR. .SH "PERFORMANCE CONSIDERATIONS" .PP Where an expression contains syntax that Tcl would otherwise perform substitutions on, enclosing an expression in braces or otherwise quoting it so that it's a static value allows the Tcl compiler to generate bytecode for the expression, resulting in better speed and smaller storage requirements. This also avoids issues that can arise if Tcl is allowed to perform substitution on the value before \fBexpr\fR is called. .PP In the following example, the value of the expression is 11 because the Tcl parser first substitutes \fB$b\fR and \fBexpr\fR then substitutes \fB$a\fR. Enclosing the expression in braces would result in a syntax error. .CS set a 3 set b {$a + 2} \fBexpr\fR $b*4 .CE .PP When an expression is generated at runtime, like the one above is, the bytcode compiler must ensure that new code is generated each time the expression is evaluated. This is the most costly kind of expression from a performance perspective. In such cases, consider directly using the commands described in the \fBmathfunc\fR(n) or \fBmathop\fR(n) documentation instead of \fBexpr\fR. Most expressions are not formed at runtime, but are literal strings or contain substitutions that don't introduce other substitutions. To allow the bytecode compiler to work with an expression as a string literal at compilation time, ensure that it contains no substitutions or that it is enclosed in braces or otherwise quoted to prevent Tcl from performing substitutions, allowing \fBexpr\fR to perform them instead. .SH EXAMPLES .PP A numeric comparison whose result is 1: .CS \fBexpr\fR {"0x03" > "2"} .CE .PP A string comparison whose result is 1: .CS \fBexpr\fR {"0y" > "0x12"} .CE .PP Define a procedure that computes an .QW interesting mathematical function: .PP .CS proc tcl::mathfunc::calc {x y} { \fBexpr\fR { ($x**2 - $y**2) / exp($x**2 + $y**2) } } .CE .PP Convert polar coordinates into cartesian coordinates: .PP .CS # convert from ($radius,$angle) set x [\fBexpr\fR { $radius * cos($angle) }] set y [\fBexpr\fR { $radius * sin($angle) }] .CE .PP Convert cartesian coordinates into polar coordinates: .PP .CS # convert from ($x,$y) set radius [\fBexpr\fR { hypot($y, $x) }] set angle [\fBexpr\fR { atan2($y, $x) }] .CE .PP Print a message describing the relationship of two string values to each other: .PP .CS puts "a and b are [\fBexpr\fR {$a eq $b ? {equal} : {different}}]" .CE .PP Set a variable indicating whether an environment variable is defined and has value of true: .PP .CS set isTrue [\fBexpr\fR { [info exists ::env(SOME_ENV_VAR)] && [string is true -strict $::env(SOME_ENV_VAR)] }] .CE .PP Generate a random integer in the range 0..99 inclusive: .PP .CS set randNum [\fBexpr\fR { int(100 * rand()) }] .CE .SH "SEE ALSO" array(n), for(n), if(n), mathfunc(n), mathop(n), namespace(n), proc(n), string(n), Tcl(n), while(n) .SH KEYWORDS arithmetic, boolean, compare, expression, fuzzy comparison .SH COPYRIGHT .nf Copyright (c) 1993 The Regents of the University of California. Copyright (c) 1994-2000 Sun Microsystems Incorporated. Copyright (c) 2005 by Kevin B. Kenny . All rights reserved. .fi '\" Local Variables: '\" mode: nroff '\" End: