'\"
'\" Copyright (c) 1993 The Regents of the University of California.
'\" Copyright (c) 1994-1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
.TH fcopy n 8.0 Tcl "Tcl Built-In Commands"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
fcopy \- Copy data from one channel to another
.SH SYNOPSIS
\fBfcopy \fIinputChan outputChan\fR ?\fB\-size \fIsize\fR? ?\fB\-command \fIcallback\fR?
.BE
.SH DESCRIPTION
.PP
The \fBfcopy\fR command copies data from one I/O channel, \fIinchan\fR, to
another I/O channel, \fIoutchan\fR.
The \fBfcopy\fR command leverages the buffering in the Tcl I/O system to
avoid extra copies and to avoid buffering too much data in
main memory when copying large files to destinations like
network sockets.
.SS "DATA QUANTITY"
All data until \fIEOF\fR is copied.
In addition, the quantity of copied data may be specified by the option
\fB\-size\fR. The given size is in bytes, if the input channel is in binary
mode. Otherwise, it is in characters.
.PP
Depreciated feature: the transfer is treated as a binary transfer, if the
encoding profile is set to
.QW tcl8
and the input encoding matches the output encoding.
In this case, eventual encoding errors are not handled.
An eventually given size is in bytes in this case.
.
.SS "BLOCKING OPERATION MODE"
Without the \fB\-command\fR option, \fBfcopy\fR blocks until the copy is complete
and returns the number of bytes or characters (using the same rules as
for the \fB\-size\fR option) written to \fIoutchan\fR.
.
.SS "BACKGROUND OPERATION MODE"
The \fB\-command\fR argument makes \fBfcopy\fR work in the background.
In this case it returns immediately and the \fIcallback\fR is invoked
later when the copy completes.
The \fIcallback\fR is called with
one or two additional
arguments that indicates how many bytes were written to \fIoutchan\fR.
If an error occurred during the background copy, the second argument is the
error string associated with the error.
With a background copy,
it is not necessary to put \fIinchan\fR or \fIoutchan\fR into
non-blocking mode; the \fBfcopy\fR command takes care of that automatically.
However, it is necessary to enter the event loop by using
the \fBvwait\fR command or by using Tk.
.PP
You are not allowed to do other input operations with \fIinchan\fR, or
output operations with \fIoutchan\fR, during a background
\fBfcopy\fR. The converse is entirely legitimate, as exhibited by the
bidirectional fcopy example below.
.PP
If either \fIinchan\fR or \fIoutchan\fR get closed
while the copy is in progress, the current copy is stopped
and the command callback is \fInot\fR made.
If \fIinchan\fR is closed,
then all data already queued for \fIoutchan\fR is written out.
.PP
Note that \fIinchan\fR can become readable during a background copy.
You should turn off any \fBfileevent\fR handlers during a background
copy so those handlers do not interfere with the copy.
Any wrong-sided I/O attempted (by a \fBfileevent\fR handler or otherwise) will
get a
.QW "channel busy"
error.
.
.SS "CHANNEL TRANSLATION OPTIONS"
\fBFcopy\fR translates end-of-line sequences in \fIinchan\fR and \fIoutchan\fR
according to the \fB\-translation\fR option
for these channels.
See the manual entry for \fBfconfigure\fR for details on the
\fB\-translation\fR option.
The translations mean that the number of bytes read from \fIinchan\fR
can be different than the number of bytes written to \fIoutchan\fR.
Only the number of bytes written to \fIoutchan\fR is reported,
either as the return value of a synchronous \fBfcopy\fR or
as the argument to the callback for an asynchronous \fBfcopy\fR.
.SS "CHANNEL ENCODING OPTIONS"
\fBFcopy\fR obeys the encodings, profiles and character translations configured
for the channels. This
means that the incoming characters are converted internally first
UTF-8 and then into the encoding of the channel \fBfcopy\fR writes
to. See the manual entry for \fBfconfigure\fR for details on the
\fB\-encoding\fR and \fB\-profile\fR options. No conversion is
done if both channels are
set to encoding
.QW binary
and have matching translations. If only the output channel is set to encoding
.QW binary
the system will write the internal UTF-8 representation of the incoming
characters. If only the input channel is set to encoding
.QW binary
the system will assume that the incoming
bytes are valid UTF-8 characters and convert them according to the
output encoding. The behaviour of the system for bytes which are not
valid UTF-8 characters is undefined in this case.
.PP
\fBFcopy\fR may throw encoding errors (error code \fBEILSEQ\fR), if input or output
channel is configured to the
.QW strict
encoding profile.
.PP
If an encoding error arises on the input channel, any data before the error
byte is written to the output channel. The input file pointer is located just
before the values causing the encoding error.
Error inspection or recovery is possible by changing the encoding parameters and
invoking a file command (\fBread\fR, \fBfcopy\fR).
.PP
If an encoding error arises on the output channel, the erroneous data is lost.
To make the difference between the input error case and the output error case,
only the error message may be inspected (read or write), as both throw the
error code \fIEILSEQ\fR.
.SH EXAMPLES
.PP
The first example transfers the contents of one channel exactly to
another. Note that when copying one file to another, it is better to
use \fBfile copy\fR which also copies file metadata (e.g. the file
access permissions) where possible.
.PP
.CS
fconfigure $in -translation binary
fconfigure $out -translation binary
\fBfcopy\fR $in $out
.CE
.PP
This second example shows how the callback gets
passed the number of bytes transferred.
It also uses vwait to put the application into the event loop.
Of course, this simplified example could be done without the command
callback.
.PP
.CS
proc Cleanup {in out bytes {error {}}} {
    global total
    set total $bytes
    close $in
    close $out
    if {[string length $error] != 0} {
        # error occurred during the copy
    }
}
set in [open $file1]
set out [socket $server $port]
\fBfcopy\fR $in $out -command [list Cleanup $in $out]
vwait total
.CE
.PP
The third example copies in chunks and tests for end of file
in the command callback.
.PP
.CS
proc CopyMore {in out chunk bytes {error {}}} {
    global total done
    incr total $bytes
    if {([string length $error] != 0) || [eof $in]} {
        set done $total
        close $in
        close $out
    } else {
        \fBfcopy\fR $in $out -size $chunk \e
                -command [list CopyMore $in $out $chunk]
    }
}
set in [open $file1]
set out [socket $server $port]
set chunk 1024
set total 0
\fBfcopy\fR $in $out -size $chunk \e
        -command [list CopyMore $in $out $chunk]
vwait done
.CE
.PP
The fourth example starts an asynchronous, bidirectional fcopy between
two sockets. Those could also be pipes from two [open "|hal 9000" r+]
(though their conversation would remain secret to the script, since
all four fileevent slots are busy).
.PP
.CS
set flows 2
proc Done {dir args} {
     global flows done
     puts "$dir is over."
     incr flows -1
     if {$flows<=0} {set done 1}
}
\fBfcopy\fR $sok1 $sok2 -command [list Done UP]
\fBfcopy\fR $sok2 $sok1 -command [list Done DOWN]
vwait done
.CE
.SH "SEE ALSO"
eof(n), fblocked(n), fconfigure(n), file(n)
.SH KEYWORDS
blocking, channel, end of line, end of file, nonblocking, read, translation
'\" Local Variables:
'\" mode: nroff
'\" End: