/* * tcl.h -- * * This header file describes the externally-visible facilities of the * Tcl interpreter. * * Copyright (c) 1987-1994 The Regents of the University of California. * Copyright (c) 1993-1996 Lucent Technologies. * Copyright (c) 1994-1998 Sun Microsystems, Inc. * Copyright (c) 1998-2000 by Scriptics Corporation. * Copyright (c) 2002 by Kevin B. Kenny. All rights reserved. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #ifndef _TCL #define _TCL /* * For C++ compilers, use extern "C" */ #ifdef __cplusplus extern "C" { #endif /* * The following defines are used to indicate the various release levels. */ #define TCL_ALPHA_RELEASE 0 #define TCL_BETA_RELEASE 1 #define TCL_FINAL_RELEASE 2 /* * When version numbers change here, must also go into the following files and * update the version numbers: * * library/init.tcl (1 LOC patch) * unix/configure.ac (2 LOC Major, 2 LOC minor, 1 LOC patch) * win/configure.ac (as above) * win/tcl.m4 (not patchlevel) * README.md (sections 0 and 2, with and without separator) * macosx/Tcl-Common.xcconfig (not patchlevel) 1 LOC * win/README (not patchlevel) (sections 0 and 2) * unix/tcl.spec (1 LOC patch) */ #if !defined(TCL_MAJOR_VERSION) # define TCL_MAJOR_VERSION 9 #endif #if TCL_MAJOR_VERSION == 9 # define TCL_MINOR_VERSION 0 # define TCL_RELEASE_LEVEL TCL_BETA_RELEASE # define TCL_RELEASE_SERIAL 2 # define TCL_VERSION "9.0" # define TCL_PATCH_LEVEL "9.0b2" #endif /* TCL_MAJOR_VERSION */ #if defined(RC_INVOKED) /* * Utility macros: STRINGIFY takes an argument and wraps it in "" (double * quotation marks), JOIN joins two arguments. */ #ifndef STRINGIFY # define STRINGIFY(x) STRINGIFY1(x) # define STRINGIFY1(x) #x #endif #ifndef JOIN # define JOIN(a,b) JOIN1(a,b) # define JOIN1(a,b) a##b #endif #endif /* RC_INVOKED */ /* * A special definition used to allow this header file to be included from * windows resource files so that they can obtain version information. * RC_INVOKED is defined by default by the windows RC tool. * * Resource compilers don't like all the C stuff, like typedefs and function * declarations, that occur below, so block them out. */ #ifndef RC_INVOKED /* * Special macro to define mutexes. */ #define TCL_DECLARE_MUTEX(name) static Tcl_Mutex name; /* * Tcl's public routine Tcl_FSSeek() uses the values SEEK_SET, SEEK_CUR, and * SEEK_END, all #define'd by stdio.h . * * Also, many extensions need stdio.h, and they've grown accustomed to tcl.h * providing it for them rather than #include-ing it themselves as they * should, so also for their sake, we keep the #include to be consistent with * prior Tcl releases. */ #include #include #if defined(__GNUC__) && (__GNUC__ > 2) # if defined(_WIN32) && defined(__USE_MINGW_ANSI_STDIO) && __USE_MINGW_ANSI_STDIO # define TCL_FORMAT_PRINTF(a,b) __attribute__ ((__format__ (__MINGW_PRINTF_FORMAT, a, b))) # else # define TCL_FORMAT_PRINTF(a,b) __attribute__ ((__format__ (__printf__, a, b))) # endif # define TCL_NORETURN __attribute__ ((noreturn)) # define TCL_NOINLINE __attribute__ ((noinline)) # define TCL_NORETURN1 __attribute__ ((noreturn)) #else # define TCL_FORMAT_PRINTF(a,b) # if defined(_MSC_VER) # define TCL_NORETURN _declspec(noreturn) # define TCL_NOINLINE __declspec(noinline) # else # define TCL_NORETURN /* nothing */ # define TCL_NOINLINE /* nothing */ # endif # define TCL_NORETURN1 /* nothing */ #endif /* * Allow a part of Tcl's API to be explicitly marked as deprecated. * * Used to make TIP 330/336 generate moans even if people use the * compatibility macros. Change your code, guys! We won't support you forever. */ #if defined(__GNUC__) && ((__GNUC__ >= 4) || ((__GNUC__ == 3) && (__GNUC_MINOR__ >= 1))) # if (__GNUC__ > 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ >= 5)) # define TCL_DEPRECATED_API(msg) __attribute__ ((__deprecated__ (msg))) # else # define TCL_DEPRECATED_API(msg) __attribute__ ((__deprecated__)) # endif #else # define TCL_DEPRECATED_API(msg) /* nothing portable */ #endif /* *---------------------------------------------------------------------------- * Macros used to declare a function to be exported by a DLL. Used by Windows, * maps to no-op declarations on non-Windows systems. The default build on * windows is for a DLL, which causes the DLLIMPORT and DLLEXPORT macros to be * nonempty. To build a static library, the macro STATIC_BUILD should be * defined. * * Note: when building static but linking dynamically to MSVCRT we must still * correctly decorate the C library imported function. Use CRTIMPORT * for this purpose. _DLL is defined by the compiler when linking to * MSVCRT. */ #ifdef _WIN32 # ifdef STATIC_BUILD # define DLLIMPORT # define DLLEXPORT # ifdef _DLL # define CRTIMPORT __declspec(dllimport) # else # define CRTIMPORT # endif # else # define DLLIMPORT __declspec(dllimport) # define DLLEXPORT __declspec(dllexport) # define CRTIMPORT __declspec(dllimport) # endif #else # define DLLIMPORT # if defined(__GNUC__) && __GNUC__ > 3 # define DLLEXPORT __attribute__ ((visibility("default"))) # else # define DLLEXPORT # endif # define CRTIMPORT #endif /* * These macros are used to control whether functions are being declared for * import or export. If a function is being declared while it is being built * to be included in a shared library, then it should have the DLLEXPORT * storage class. If is being declared for use by a module that is going to * link against the shared library, then it should have the DLLIMPORT storage * class. If the symbol is being declared for a static build or for use from a * stub library, then the storage class should be empty. * * The convention is that a macro called BUILD_xxxx, where xxxx is the name of * a library we are building, is set on the compile line for sources that are * to be placed in the library. When this macro is set, the storage class will * be set to DLLEXPORT. At the end of the header file, the storage class will * be reset to DLLIMPORT. */ #undef TCL_STORAGE_CLASS #ifdef BUILD_tcl # define TCL_STORAGE_CLASS DLLEXPORT #else # ifdef USE_TCL_STUBS # define TCL_STORAGE_CLASS # else # define TCL_STORAGE_CLASS DLLIMPORT # endif #endif #if !defined(CONST86) && !defined(TCL_NO_DEPRECATED) # define CONST86 const #endif /* * Make sure EXTERN isn't defined elsewhere. */ #ifdef EXTERN # undef EXTERN #endif /* EXTERN */ #ifdef __cplusplus # define EXTERN extern "C" TCL_STORAGE_CLASS #else # define EXTERN extern TCL_STORAGE_CLASS #endif /* * Miscellaneous declarations. */ typedef void *ClientData; /* * Darwin specific configure overrides (to support fat compiles, where * configure runs only once for multiple architectures): */ #ifdef __APPLE__ # ifdef __LP64__ # define TCL_WIDE_INT_IS_LONG 1 # define TCL_CFG_DO64BIT 1 # else /* !__LP64__ */ # undef TCL_WIDE_INT_IS_LONG # undef TCL_CFG_DO64BIT # endif /* __LP64__ */ # undef HAVE_STRUCT_STAT64 #endif /* __APPLE__ */ /* Cross-compiling 32-bit on a 64-bit platform? Then our * configure script does the wrong thing. Correct that here. */ #if defined(__GNUC__) && !defined(_WIN32) && !defined(__LP64__) # undef TCL_WIDE_INT_IS_LONG #endif /* * Define Tcl_WideInt to be a type that is (at least) 64-bits wide, and define * Tcl_WideUInt to be the unsigned variant of that type (assuming that where * we have one, we can have the other.) * * Also defines the following macros: * TCL_WIDE_INT_IS_LONG - if wide ints are really longs (i.e. we're on a * LP64 system such as modern Solaris or Linux ... not including Win64) * Tcl_WideAsLong - forgetful converter from wideInt to long. * Tcl_LongAsWide - sign-extending converter from long to wideInt. * Tcl_WideAsDouble - converter from wideInt to double. * Tcl_DoubleAsWide - converter from double to wideInt. * * The following invariant should hold for any long value 'longVal': * longVal == Tcl_WideAsLong(Tcl_LongAsWide(longVal)) */ #if !defined(TCL_WIDE_INT_TYPE) && !defined(TCL_WIDE_INT_IS_LONG) && !defined(_WIN32) && !defined(__GNUC__) /* * Don't know what platform it is and configure hasn't discovered what is * going on for us. Try to guess... */ # include # if defined(LLONG_MAX) && (LLONG_MAX == LONG_MAX) # define TCL_WIDE_INT_IS_LONG 1 # endif #endif #ifndef TCL_WIDE_INT_TYPE # define TCL_WIDE_INT_TYPE long long #endif /* !TCL_WIDE_INT_TYPE */ typedef TCL_WIDE_INT_TYPE Tcl_WideInt; typedef unsigned TCL_WIDE_INT_TYPE Tcl_WideUInt; #ifndef TCL_LL_MODIFIER # if defined(_WIN32) && (!defined(__USE_MINGW_ANSI_STDIO) || !__USE_MINGW_ANSI_STDIO) # define TCL_LL_MODIFIER "I64" # else # define TCL_LL_MODIFIER "ll" # endif #endif /* !TCL_LL_MODIFIER */ #ifndef TCL_Z_MODIFIER # if defined(__GNUC__) && !defined(_WIN32) # define TCL_Z_MODIFIER "z" # elif defined(_WIN64) # define TCL_Z_MODIFIER TCL_LL_MODIFIER # else # define TCL_Z_MODIFIER "" # endif #endif /* !TCL_Z_MODIFIER */ #ifndef TCL_T_MODIFIER # if defined(__GNUC__) && !defined(_WIN32) # define TCL_T_MODIFIER "t" # elif defined(_WIN64) # define TCL_T_MODIFIER TCL_LL_MODIFIER # else # define TCL_T_MODIFIER TCL_Z_MODIFIER # endif #endif /* !TCL_T_MODIFIER */ #define Tcl_WideAsLong(val) ((long)((Tcl_WideInt)(val))) #define Tcl_LongAsWide(val) ((Tcl_WideInt)((long)(val))) #define Tcl_WideAsDouble(val) ((double)((Tcl_WideInt)(val))) #define Tcl_DoubleAsWide(val) ((Tcl_WideInt)((double)(val))) #if TCL_MAJOR_VERSION < 9 typedef int Tcl_Size; # define TCL_SIZE_MAX ((int)(((unsigned int)-1)>>1)) # define TCL_SIZE_MODIFIER "" #else typedef ptrdiff_t Tcl_Size; # define TCL_SIZE_MAX ((Tcl_Size)(((size_t)-1)>>1)) # define TCL_SIZE_MODIFIER TCL_T_MODIFIER #endif /* TCL_MAJOR_VERSION */ #ifdef _WIN32 # if TCL_MAJOR_VERSION > 8 || defined(_WIN64) || defined(_USE_64BIT_TIME_T) typedef struct __stat64 Tcl_StatBuf; # elif defined(_USE_32BIT_TIME_T) typedef struct _stati64 Tcl_StatBuf; # else typedef struct _stat32i64 Tcl_StatBuf; # endif #elif defined(__CYGWIN__) typedef struct { unsigned st_dev; unsigned short st_ino; unsigned short st_mode; short st_nlink; short st_uid; short st_gid; /* Here is a 2-byte gap */ unsigned st_rdev; /* Here is a 4-byte gap */ long long st_size; struct {long tv_sec;} st_atim; struct {long tv_sec;} st_mtim; struct {long tv_sec;} st_ctim; } Tcl_StatBuf; #else typedef struct stat Tcl_StatBuf; #endif /* *---------------------------------------------------------------------------- * Data structures defined opaquely in this module. The definitions below just * provide dummy types. */ typedef struct Tcl_AsyncHandler_ *Tcl_AsyncHandler; typedef struct Tcl_Channel_ *Tcl_Channel; typedef struct Tcl_ChannelTypeVersion_ *Tcl_ChannelTypeVersion; typedef struct Tcl_Command_ *Tcl_Command; typedef struct Tcl_Condition_ *Tcl_Condition; typedef struct Tcl_Dict_ *Tcl_Dict; typedef struct Tcl_EncodingState_ *Tcl_EncodingState; typedef struct Tcl_Encoding_ *Tcl_Encoding; typedef struct Tcl_Event Tcl_Event; typedef struct Tcl_Interp Tcl_Interp; typedef struct Tcl_InterpState_ *Tcl_InterpState; typedef struct Tcl_LoadHandle_ *Tcl_LoadHandle; typedef struct Tcl_Mutex_ *Tcl_Mutex; typedef struct Tcl_Pid_ *Tcl_Pid; typedef struct Tcl_RegExp_ *Tcl_RegExp; typedef struct Tcl_ThreadDataKey_ *Tcl_ThreadDataKey; typedef struct Tcl_ThreadId_ *Tcl_ThreadId; typedef struct Tcl_TimerToken_ *Tcl_TimerToken; typedef struct Tcl_Trace_ *Tcl_Trace; typedef struct Tcl_Var_ *Tcl_Var; typedef struct Tcl_ZLibStream_ *Tcl_ZlibStream; /* *---------------------------------------------------------------------------- * Definition of the interface to functions implementing threads. A function * following this definition is given to each call of 'Tcl_CreateThread' and * will be called as the main fuction of the new thread created by that call. */ #if defined _WIN32 typedef unsigned (__stdcall Tcl_ThreadCreateProc) (void *clientData); #else typedef void (Tcl_ThreadCreateProc) (void *clientData); #endif /* * Threading function return types used for abstracting away platform * differences when writing a Tcl_ThreadCreateProc. See the NewThread function * in generic/tclThreadTest.c for it's usage. */ #if defined _WIN32 # define Tcl_ThreadCreateType unsigned __stdcall # define TCL_THREAD_CREATE_RETURN return 0 #else # define Tcl_ThreadCreateType void # define TCL_THREAD_CREATE_RETURN #endif /* * Definition of values for default stacksize and the possible flags to be * given to Tcl_CreateThread. */ #define TCL_THREAD_STACK_DEFAULT (0) /* Use default size for stack. */ #define TCL_THREAD_NOFLAGS (0000) /* Standard flags, default * behaviour. */ #define TCL_THREAD_JOINABLE (0001) /* Mark the thread as joinable. */ /* * Flag values passed to Tcl_StringCaseMatch. */ #define TCL_MATCH_NOCASE (1<<0) /* * Flag values passed to Tcl_GetRegExpFromObj. */ #define TCL_REG_BASIC 000000 /* BREs (convenience). */ #define TCL_REG_EXTENDED 000001 /* EREs. */ #define TCL_REG_ADVF 000002 /* Advanced features in EREs. */ #define TCL_REG_ADVANCED 000003 /* AREs (which are also EREs). */ #define TCL_REG_QUOTE 000004 /* No special characters, none. */ #define TCL_REG_NOCASE 000010 /* Ignore case. */ #define TCL_REG_NOSUB 000020 /* Don't care about subexpressions. */ #define TCL_REG_EXPANDED 000040 /* Expanded format, white space & * comments. */ #define TCL_REG_NLSTOP 000100 /* \n doesn't match . or [^ ] */ #define TCL_REG_NLANCH 000200 /* ^ matches after \n, $ before. */ #define TCL_REG_NEWLINE 000300 /* Newlines are line terminators. */ #define TCL_REG_CANMATCH 001000 /* Report details on partial/limited * matches. */ /* * Flags values passed to Tcl_RegExpExecObj. */ #define TCL_REG_NOTBOL 0001 /* Beginning of string does not match ^. */ #define TCL_REG_NOTEOL 0002 /* End of string does not match $. */ /* * Structures filled in by Tcl_RegExpInfo. Note that all offset values are * relative to the start of the match string, not the beginning of the entire * string. */ typedef struct Tcl_RegExpIndices { #if TCL_MAJOR_VERSION > 8 Tcl_Size start; /* Character offset of first character in * match. */ Tcl_Size end; /* Character offset of first character after * the match. */ #else long start; long end; #endif } Tcl_RegExpIndices; typedef struct Tcl_RegExpInfo { Tcl_Size nsubs; /* Number of subexpressions in the compiled * expression. */ Tcl_RegExpIndices *matches; /* Array of nsubs match offset pairs. */ #if TCL_MAJOR_VERSION > 8 Tcl_Size extendStart; /* The offset at which a subsequent match * might begin. */ #else long extendStart; long reserved; /* Reserved for later use. */ #endif } Tcl_RegExpInfo; /* * Picky compilers complain if this typdef doesn't appear before the struct's * reference in tclDecls.h. */ typedef Tcl_StatBuf *Tcl_Stat_; typedef struct stat *Tcl_OldStat_; /* *---------------------------------------------------------------------------- * When a TCL command returns, the interpreter contains a result from the * command. Programmers are strongly encouraged to use one of the functions * Tcl_GetObjResult() or Tcl_GetStringResult() to read the interpreter's * result. See the SetResult man page for details. Besides this result, the * command function returns an integer code, which is one of the following: * * TCL_OK Command completed normally; the interpreter's result * contains the command's result. * TCL_ERROR The command couldn't be completed successfully; the * interpreter's result describes what went wrong. * TCL_RETURN The command requests that the current function return; * the interpreter's result contains the function's * return value. * TCL_BREAK The command requests that the innermost loop be * exited; the interpreter's result is meaningless. * TCL_CONTINUE Go on to the next iteration of the current loop; the * interpreter's result is meaningless. */ #define TCL_OK 0 #define TCL_ERROR 1 #define TCL_RETURN 2 #define TCL_BREAK 3 #define TCL_CONTINUE 4 /* *---------------------------------------------------------------------------- * Flags to control what substitutions are performed by Tcl_SubstObj(): */ #define TCL_SUBST_COMMANDS 001 #define TCL_SUBST_VARIABLES 002 #define TCL_SUBST_BACKSLASHES 004 #define TCL_SUBST_ALL 007 /* * Forward declaration of Tcl_Obj to prevent an error when the forward * reference to Tcl_Obj is encountered in the function types declared below. */ struct Tcl_Obj; /* *---------------------------------------------------------------------------- * Function types defined by Tcl: */ typedef int (Tcl_AppInitProc) (Tcl_Interp *interp); typedef int (Tcl_AsyncProc) (void *clientData, Tcl_Interp *interp, int code); typedef void (Tcl_ChannelProc) (void *clientData, int mask); typedef void (Tcl_CloseProc) (void *data); typedef void (Tcl_CmdDeleteProc) (void *clientData); typedef int (Tcl_CmdProc) (void *clientData, Tcl_Interp *interp, int argc, const char *argv[]); typedef void (Tcl_CmdTraceProc) (void *clientData, Tcl_Interp *interp, int level, char *command, Tcl_CmdProc *proc, void *cmdClientData, int argc, const char *argv[]); typedef int (Tcl_CmdObjTraceProc) (void *clientData, Tcl_Interp *interp, int level, const char *command, Tcl_Command commandInfo, int objc, struct Tcl_Obj *const *objv); typedef void (Tcl_CmdObjTraceDeleteProc) (void *clientData); typedef void (Tcl_DupInternalRepProc) (struct Tcl_Obj *srcPtr, struct Tcl_Obj *dupPtr); typedef int (Tcl_EncodingConvertProc) (void *clientData, const char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, int *dstCharsPtr); typedef void (Tcl_EncodingFreeProc) (void *clientData); typedef int (Tcl_EventProc) (Tcl_Event *evPtr, int flags); typedef void (Tcl_EventCheckProc) (void *clientData, int flags); typedef int (Tcl_EventDeleteProc) (Tcl_Event *evPtr, void *clientData); typedef void (Tcl_EventSetupProc) (void *clientData, int flags); typedef void (Tcl_ExitProc) (void *clientData); typedef void (Tcl_FileProc) (void *clientData, int mask); typedef void (Tcl_FileFreeProc) (void *clientData); typedef void (Tcl_FreeInternalRepProc) (struct Tcl_Obj *objPtr); typedef void (Tcl_IdleProc) (void *clientData); typedef void (Tcl_InterpDeleteProc) (void *clientData, Tcl_Interp *interp); typedef void (Tcl_NamespaceDeleteProc) (void *clientData); typedef int (Tcl_ObjCmdProc) (void *clientData, Tcl_Interp *interp, int objc, struct Tcl_Obj *const *objv); #if TCL_MAJOR_VERSION > 8 typedef int (Tcl_ObjCmdProc2) (void *clientData, Tcl_Interp *interp, Tcl_Size objc, struct Tcl_Obj *const *objv); typedef int (Tcl_CmdObjTraceProc2) (void *clientData, Tcl_Interp *interp, Tcl_Size level, const char *command, Tcl_Command commandInfo, Tcl_Size objc, struct Tcl_Obj *const *objv); typedef void (Tcl_FreeProc) (void *blockPtr); #define Tcl_ExitProc Tcl_FreeProc #define Tcl_FileFreeProc Tcl_FreeProc #define Tcl_FileFreeProc Tcl_FreeProc #define Tcl_EncodingFreeProc Tcl_FreeProc #else #define Tcl_ObjCmdProc2 Tcl_ObjCmdProc #define Tcl_CmdObjTraceProc2 Tcl_CmdObjTraceProc typedef void (Tcl_FreeProc) (char *blockPtr); #endif typedef int (Tcl_LibraryInitProc) (Tcl_Interp *interp); typedef int (Tcl_LibraryUnloadProc) (Tcl_Interp *interp, int flags); typedef void (Tcl_PanicProc) (const char *format, ...); typedef void (Tcl_TcpAcceptProc) (void *callbackData, Tcl_Channel chan, char *address, int port); typedef void (Tcl_TimerProc) (void *clientData); typedef int (Tcl_SetFromAnyProc) (Tcl_Interp *interp, struct Tcl_Obj *objPtr); typedef void (Tcl_UpdateStringProc) (struct Tcl_Obj *objPtr); typedef char * (Tcl_VarTraceProc) (void *clientData, Tcl_Interp *interp, const char *part1, const char *part2, int flags); typedef void (Tcl_CommandTraceProc) (void *clientData, Tcl_Interp *interp, const char *oldName, const char *newName, int flags); typedef void (Tcl_CreateFileHandlerProc) (int fd, int mask, Tcl_FileProc *proc, void *clientData); typedef void (Tcl_DeleteFileHandlerProc) (int fd); typedef void (Tcl_AlertNotifierProc) (void *clientData); typedef void (Tcl_ServiceModeHookProc) (int mode); typedef void *(Tcl_InitNotifierProc) (void); typedef void (Tcl_FinalizeNotifierProc) (void *clientData); typedef void (Tcl_MainLoopProc) (void); /* Abstract List functions */ typedef Tcl_Size (Tcl_ObjTypeLengthProc) (struct Tcl_Obj *listPtr); typedef int (Tcl_ObjTypeIndexProc) (Tcl_Interp *interp, struct Tcl_Obj *listPtr, Tcl_Size index, struct Tcl_Obj** elemObj); typedef int (Tcl_ObjTypeSliceProc) (Tcl_Interp *interp, struct Tcl_Obj *listPtr, Tcl_Size fromIdx, Tcl_Size toIdx, struct Tcl_Obj **newObjPtr); typedef int (Tcl_ObjTypeReverseProc) (Tcl_Interp *interp, struct Tcl_Obj *listPtr, struct Tcl_Obj **newObjPtr); typedef int (Tcl_ObjTypeGetElements) (Tcl_Interp *interp, struct Tcl_Obj *listPtr, Tcl_Size *objcptr, struct Tcl_Obj ***objvptr); typedef struct Tcl_Obj* (Tcl_ObjTypeSetElement) (Tcl_Interp *interp, struct Tcl_Obj *listPtr, Tcl_Size indexCount, struct Tcl_Obj *const indexArray[], struct Tcl_Obj *valueObj); typedef int (Tcl_ObjTypeReplaceProc) (Tcl_Interp *interp, struct Tcl_Obj *listObj, Tcl_Size first, Tcl_Size numToDelete, Tcl_Size numToInsert, struct Tcl_Obj *const insertObjs[]); typedef int (Tcl_ObjTypeInOperatorProc) (Tcl_Interp *interp, struct Tcl_Obj *valueObj, struct Tcl_Obj *listObj, int *boolResult); #ifndef TCL_NO_DEPRECATED # define Tcl_PackageInitProc Tcl_LibraryInitProc # define Tcl_PackageUnloadProc Tcl_LibraryUnloadProc #endif /* *---------------------------------------------------------------------------- * The following structure represents a type of object, which is a particular * internal representation for an object plus a set of functions that provide * standard operations on objects of that type. */ typedef struct Tcl_ObjType { const char *name; /* Name of the type, e.g. "int". */ Tcl_FreeInternalRepProc *freeIntRepProc; /* Called to free any storage for the type's * internal rep. NULL if the internal rep does * not need freeing. */ Tcl_DupInternalRepProc *dupIntRepProc; /* Called to create a new object as a copy of * an existing object. */ Tcl_UpdateStringProc *updateStringProc; /* Called to update the string rep from the * type's internal representation. */ Tcl_SetFromAnyProc *setFromAnyProc; /* Called to convert the object's internal rep * to this type. Frees the internal rep of the * old type. Returns TCL_ERROR on failure. */ #if TCL_MAJOR_VERSION > 8 size_t version; /* List emulation functions - ObjType Version 1 */ Tcl_ObjTypeLengthProc *lengthProc; /* Return the [llength] of the ** AbstractList */ Tcl_ObjTypeIndexProc *indexProc; /* Return a value (Tcl_Obj) for ** [lindex $al $index] */ Tcl_ObjTypeSliceProc *sliceProc; /* Return an AbstractList for ** [lrange $al $start $end] */ Tcl_ObjTypeReverseProc *reverseProc; /* Return an AbstractList for ** [lreverse $al] */ Tcl_ObjTypeGetElements *getElementsProc; /* Return an objv[] of all elements in ** the list */ Tcl_ObjTypeSetElement *setElementProc; /* Replace the element at the indicie ** with the given valueObj. */ Tcl_ObjTypeReplaceProc *replaceProc; /* Replace subset with subset */ Tcl_ObjTypeInOperatorProc *inOperProc; /* "in" and "ni" expr list ** operation Determine if the given ** string value matches an element in ** the list */ #endif } Tcl_ObjType; #if TCL_MAJOR_VERSION > 8 # define TCL_OBJTYPE_V0 0, \ 0,0,0,0,0,0,0,0 /* Pre-Tcl 9 */ # define TCL_OBJTYPE_V1(a) offsetof(Tcl_ObjType, indexProc), \ a,0,0,0,0,0,0,0 /* Tcl 9 Version 1 */ # define TCL_OBJTYPE_V2(a,b,c,d,e,f,g,h) sizeof(Tcl_ObjType), \ a,b,c,d,e,f,g,h /* Tcl 9 - AbstractLists */ #else # define TCL_OBJTYPE_V0 /* just empty */ #endif /* * The following structure stores an internal representation (internalrep) for * a Tcl value. An internalrep is associated with an Tcl_ObjType when both * are stored in the same Tcl_Obj. The routines of the Tcl_ObjType govern * the handling of the internalrep. */ typedef union Tcl_ObjInternalRep { /* The internal representation: */ long longValue; /* - an long integer value. */ double doubleValue; /* - a double-precision floating value. */ void *otherValuePtr; /* - another, type-specific value, */ /* not used internally any more. */ Tcl_WideInt wideValue; /* - an integer value >= 64bits */ struct { /* - internal rep as two pointers. */ void *ptr1; void *ptr2; } twoPtrValue; struct { /* - internal rep as a pointer and a long, */ void *ptr; /* not used internally any more. */ unsigned long value; } ptrAndLongRep; } Tcl_ObjInternalRep; /* * One of the following structures exists for each object in the Tcl system. * An object stores a value as either a string, some internal representation, * or both. */ typedef struct Tcl_Obj { Tcl_Size refCount; /* When 0 the object will be freed. */ char *bytes; /* This points to the first byte of the * object's string representation. The array * must be followed by a null byte (i.e., at * offset length) but may also contain * embedded null characters. The array's * storage is allocated by Tcl_Alloc. NULL means * the string rep is invalid and must be * regenerated from the internal rep. Clients * should use Tcl_GetStringFromObj or * Tcl_GetString to get a pointer to the byte * array as a readonly value. */ Tcl_Size length; /* The number of bytes at *bytes, not * including the terminating null. */ const Tcl_ObjType *typePtr; /* Denotes the object's type. Always * corresponds to the type of the object's * internal rep. NULL indicates the object has * no internal rep (has no type). */ Tcl_ObjInternalRep internalRep; /* The internal representation: */ } Tcl_Obj; /* *---------------------------------------------------------------------------- * The following definitions support Tcl's namespace facility. Note: the first * five fields must match exactly the fields in a Namespace structure (see * tclInt.h). */ typedef struct Tcl_Namespace { char *name; /* The namespace's name within its parent * namespace. This contains no ::'s. The name * of the global namespace is "" although "::" * is an synonym. */ char *fullName; /* The namespace's fully qualified name. This * starts with ::. */ void *clientData; /* Arbitrary value associated with this * namespace. */ Tcl_NamespaceDeleteProc *deleteProc; /* Function invoked when deleting the * namespace to, e.g., free clientData. */ struct Tcl_Namespace *parentPtr; /* Points to the namespace that contains this * one. NULL if this is the global * namespace. */ } Tcl_Namespace; /* *---------------------------------------------------------------------------- * The following structure represents a call frame, or activation record. A * call frame defines a naming context for a procedure call: its local scope * (for local variables) and its namespace scope (used for non-local * variables; often the global :: namespace). A call frame can also define the * naming context for a namespace eval or namespace inscope command: the * namespace in which the command's code should execute. The Tcl_CallFrame * structures exist only while procedures or namespace eval/inscope's are * being executed, and provide a Tcl call stack. * * A call frame is initialized and pushed using Tcl_PushCallFrame and popped * using Tcl_PopCallFrame. Storage for a Tcl_CallFrame must be provided by the * Tcl_PushCallFrame caller, and callers typically allocate them on the C call * stack for efficiency. For this reason, Tcl_CallFrame is defined as a * structure and not as an opaque token. However, most Tcl_CallFrame fields * are hidden since applications should not access them directly; others are * declared as "dummyX". * * WARNING!! The structure definition must be kept consistent with the * CallFrame structure in tclInt.h. If you change one, change the other. */ typedef struct Tcl_CallFrame { Tcl_Namespace *nsPtr; int dummy1; Tcl_Size dummy2; void *dummy3; void *dummy4; void *dummy5; Tcl_Size dummy6; void *dummy7; void *dummy8; Tcl_Size dummy9; void *dummy10; void *dummy11; void *dummy12; void *dummy13; } Tcl_CallFrame; /* *---------------------------------------------------------------------------- * Information about commands that is returned by Tcl_GetCommandInfo and * passed to Tcl_SetCommandInfo. objProc is an objc/objv object-based command * function while proc is a traditional Tcl argc/argv string-based function. * Tcl_CreateObjCommand and Tcl_CreateCommand ensure that both objProc and * proc are non-NULL and can be called to execute the command. However, it may * be faster to call one instead of the other. The member isNativeObjectProc * is set to 1 if an object-based function was registered by * Tcl_CreateObjCommand, and to 0 if a string-based function was registered by * Tcl_CreateCommand. The other function is typically set to a compatibility * wrapper that does string-to-object or object-to-string argument conversions * then calls the other function. */ typedef struct { int isNativeObjectProc; /* 1 if objProc was registered by a call to * Tcl_CreateObjCommand; 2 if objProc was registered by * a call to Tcl_CreateObjCommand2; 0 otherwise. * Tcl_SetCmdInfo does not modify this field. */ Tcl_ObjCmdProc *objProc; /* Command's object-based function. */ void *objClientData; /* ClientData for object proc. */ Tcl_CmdProc *proc; /* Command's string-based function. */ void *clientData; /* ClientData for string proc. */ Tcl_CmdDeleteProc *deleteProc; /* Function to call when command is * deleted. */ void *deleteData; /* Value to pass to deleteProc (usually the * same as clientData). */ Tcl_Namespace *namespacePtr;/* Points to the namespace that contains this * command. Note that Tcl_SetCmdInfo will not * change a command's namespace; use * TclRenameCommand or Tcl_Eval (of 'rename') * to do that. */ Tcl_ObjCmdProc2 *objProc2; /* Command's object2-based function. */ void *objClientData2; /* ClientData for object2 proc. */ } Tcl_CmdInfo; /* *---------------------------------------------------------------------------- * The structure defined below is used to hold dynamic strings. The only * fields that clients should use are string and length, accessible via the * macros Tcl_DStringValue and Tcl_DStringLength. */ #define TCL_DSTRING_STATIC_SIZE 200 typedef struct Tcl_DString { char *string; /* Points to beginning of string: either * staticSpace below or a malloced array. */ Tcl_Size length; /* Number of bytes in string excluding * terminating nul */ Tcl_Size spaceAvl; /* Total number of bytes available for the * string and its terminating NULL char. */ char staticSpace[TCL_DSTRING_STATIC_SIZE]; /* Space to use in common case where string is * small. */ } Tcl_DString; #define Tcl_DStringLength(dsPtr) ((dsPtr)->length) #define Tcl_DStringValue(dsPtr) ((dsPtr)->string) /* * Definitions for the maximum number of digits of precision that may be * produced by Tcl_PrintDouble, and the number of bytes of buffer space * required by Tcl_PrintDouble. */ #define TCL_MAX_PREC 17 #define TCL_DOUBLE_SPACE (TCL_MAX_PREC+10) /* * Definition for a number of bytes of buffer space sufficient to hold the * string representation of an integer in base 10 (assuming the existence of * 64-bit integers). */ #define TCL_INTEGER_SPACE (3*(int)sizeof(Tcl_WideInt)) /* *---------------------------------------------------------------------------- * Type values returned by Tcl_GetNumberFromObj * TCL_NUMBER_INT Representation is a Tcl_WideInt * TCL_NUMBER_BIG Representation is an mp_int * TCL_NUMBER_DOUBLE Representation is a double * TCL_NUMBER_NAN Value is NaN. */ #define TCL_NUMBER_INT 2 #define TCL_NUMBER_BIG 3 #define TCL_NUMBER_DOUBLE 4 #define TCL_NUMBER_NAN 5 /* * Flag values passed to Tcl_ConvertElement. * TCL_DONT_USE_BRACES forces it not to enclose the element in braces, but to * use backslash quoting instead. * TCL_DONT_QUOTE_HASH disables the default quoting of the '#' character. It * is safe to leave the hash unquoted when the element is not the first * element of a list, and this flag can be used by the caller to indicate * that condition. */ #define TCL_DONT_USE_BRACES 1 #define TCL_DONT_QUOTE_HASH 8 /* * Flags that may be passed to Tcl_GetIndexFromObj. * TCL_EXACT disallows abbreviated strings. * TCL_NULL_OK allows the empty string or NULL to return TCL_OK. * The returned value will be -1; * TCL_INDEX_TEMP_TABLE disallows caching of lookups. A possible use case is * a table that will not live long enough to make it worthwhile. */ #define TCL_EXACT 1 #define TCL_NULL_OK 32 #define TCL_INDEX_TEMP_TABLE 64 /* * Flags that may be passed to Tcl_UniCharToUtf. * TCL_COMBINE Combine surrogates */ #if TCL_MAJOR_VERSION > 8 # define TCL_COMBINE 0x1000000 #else # define TCL_COMBINE 0 #endif /* *---------------------------------------------------------------------------- * Flag values passed to Tcl_RecordAndEval, Tcl_EvalObj, Tcl_EvalObjv. * WARNING: these bit choices must not conflict with the bit choices for * evalFlag bits in tclInt.h! * * Meanings: * TCL_NO_EVAL: Just record this command * TCL_EVAL_GLOBAL: Execute script in global namespace * TCL_EVAL_DIRECT: Do not compile this script * TCL_EVAL_INVOKE: Magical Tcl_EvalObjv mode for aliases/ensembles * o Run in iPtr->lookupNsPtr or global namespace * o Cut out of error traces * o Don't reset the flags controlling ensemble * error message rewriting. * TCL_CANCEL_UNWIND: Magical Tcl_CancelEval mode that causes the * stack for the script in progress to be * completely unwound. * TCL_EVAL_NOERR: Do no exception reporting at all, just return * as the caller will report. */ #define TCL_NO_EVAL 0x010000 #define TCL_EVAL_GLOBAL 0x020000 #define TCL_EVAL_DIRECT 0x040000 #define TCL_EVAL_INVOKE 0x080000 #define TCL_CANCEL_UNWIND 0x100000 #define TCL_EVAL_NOERR 0x200000 /* * Special freeProc values that may be passed to Tcl_SetResult (see the man * page for details): */ #define TCL_VOLATILE ((Tcl_FreeProc *) 1) #define TCL_STATIC ((Tcl_FreeProc *) 0) #define TCL_DYNAMIC ((Tcl_FreeProc *) 3) /* * Flag values passed to variable-related functions. * WARNING: these bit choices must not conflict with the bit choice for * TCL_CANCEL_UNWIND, above. */ #define TCL_GLOBAL_ONLY 1 #define TCL_NAMESPACE_ONLY 2 #define TCL_APPEND_VALUE 4 #define TCL_LIST_ELEMENT 8 #define TCL_TRACE_READS 0x10 #define TCL_TRACE_WRITES 0x20 #define TCL_TRACE_UNSETS 0x40 #define TCL_TRACE_DESTROYED 0x80 #define TCL_LEAVE_ERR_MSG 0x200 #define TCL_TRACE_ARRAY 0x800 /* Indicate the semantics of the result of a trace. */ #define TCL_TRACE_RESULT_DYNAMIC 0x8000 #define TCL_TRACE_RESULT_OBJECT 0x10000 /* * Flag values for ensemble commands. */ #define TCL_ENSEMBLE_PREFIX 0x02/* Flag value to say whether to allow * unambiguous prefixes of commands or to * require exact matches for command names. */ /* * Flag values passed to command-related functions. */ #define TCL_TRACE_RENAME 0x2000 #define TCL_TRACE_DELETE 0x4000 #define TCL_ALLOW_INLINE_COMPILATION 0x20000 /* * Types for linked variables: */ #define TCL_LINK_INT 1 #define TCL_LINK_DOUBLE 2 #define TCL_LINK_BOOLEAN 3 #define TCL_LINK_STRING 4 #define TCL_LINK_WIDE_INT 5 #define TCL_LINK_CHAR 6 #define TCL_LINK_UCHAR 7 #define TCL_LINK_SHORT 8 #define TCL_LINK_USHORT 9 #define TCL_LINK_UINT 10 #define TCL_LINK_LONG ((sizeof(long) != sizeof(int)) ? TCL_LINK_WIDE_INT : TCL_LINK_INT) #define TCL_LINK_ULONG ((sizeof(long) != sizeof(int)) ? TCL_LINK_WIDE_UINT : TCL_LINK_UINT) #define TCL_LINK_FLOAT 13 #define TCL_LINK_WIDE_UINT 14 #define TCL_LINK_CHARS 15 #define TCL_LINK_BINARY 16 #define TCL_LINK_READ_ONLY 0x80 /* *---------------------------------------------------------------------------- * Forward declarations of Tcl_HashTable and related types. */ #ifndef TCL_HASH_TYPE #if TCL_MAJOR_VERSION > 8 # define TCL_HASH_TYPE size_t #else # define TCL_HASH_TYPE unsigned #endif #endif typedef struct Tcl_HashKeyType Tcl_HashKeyType; typedef struct Tcl_HashTable Tcl_HashTable; typedef struct Tcl_HashEntry Tcl_HashEntry; typedef TCL_HASH_TYPE (Tcl_HashKeyProc) (Tcl_HashTable *tablePtr, void *keyPtr); typedef int (Tcl_CompareHashKeysProc) (void *keyPtr, Tcl_HashEntry *hPtr); typedef Tcl_HashEntry * (Tcl_AllocHashEntryProc) (Tcl_HashTable *tablePtr, void *keyPtr); typedef void (Tcl_FreeHashEntryProc) (Tcl_HashEntry *hPtr); /* * Structure definition for an entry in a hash table. No-one outside Tcl * should access any of these fields directly; use the macros defined below. */ struct Tcl_HashEntry { Tcl_HashEntry *nextPtr; /* Pointer to next entry in this hash bucket, * or NULL for end of chain. */ Tcl_HashTable *tablePtr; /* Pointer to table containing entry. */ size_t hash; /* Hash value. */ void *clientData; /* Application stores something here with * Tcl_SetHashValue. */ union { /* Key has one of these forms: */ char *oneWordValue; /* One-word value for key. */ Tcl_Obj *objPtr; /* Tcl_Obj * key value. */ int words[1]; /* Multiple integer words for key. The actual * size will be as large as necessary for this * table's keys. */ char string[1]; /* String for key. The actual size will be as * large as needed to hold the key. */ } key; /* MUST BE LAST FIELD IN RECORD!! */ }; /* * Flags used in Tcl_HashKeyType. * * TCL_HASH_KEY_RANDOMIZE_HASH - * There are some things, pointers for example * which don't hash well because they do not use * the lower bits. If this flag is set then the * hash table will attempt to rectify this by * randomising the bits and then using the upper * N bits as the index into the table. * TCL_HASH_KEY_SYSTEM_HASH - If this flag is set then all memory internally * allocated for the hash table that is not for an * entry will use the system heap. * TCL_HASH_KEY_DIRECT_COMPARE - * Allows fast comparison for hash keys directly * by compare of their key.oneWordValue values, * before call of compareKeysProc (much slower * than a direct compare, so it is speed-up only * flag). Don't use it if keys contain values rather * than pointers. */ #define TCL_HASH_KEY_RANDOMIZE_HASH 0x1 #define TCL_HASH_KEY_SYSTEM_HASH 0x2 #define TCL_HASH_KEY_DIRECT_COMPARE 0x4 /* * Structure definition for the methods associated with a hash table key type. */ #define TCL_HASH_KEY_TYPE_VERSION 1 struct Tcl_HashKeyType { int version; /* Version of the table. If this structure is * extended in future then the version can be * used to distinguish between different * structures. */ int flags; /* Flags, see above for details. */ Tcl_HashKeyProc *hashKeyProc; /* Calculates a hash value for the key. If * this is NULL then the pointer itself is * used as a hash value. */ Tcl_CompareHashKeysProc *compareKeysProc; /* Compares two keys and returns zero if they * do not match, and non-zero if they do. If * this is NULL then the pointers are * compared. */ Tcl_AllocHashEntryProc *allocEntryProc; /* Called to allocate memory for a new entry, * i.e. if the key is a string then this could * allocate a single block which contains * enough space for both the entry and the * string. Only the key field of the allocated * Tcl_HashEntry structure needs to be filled * in. If something else needs to be done to * the key, i.e. incrementing a reference * count then that should be done by this * function. If this is NULL then Tcl_Alloc is * used to allocate enough space for a * Tcl_HashEntry and the key pointer is * assigned to key.oneWordValue. */ Tcl_FreeHashEntryProc *freeEntryProc; /* Called to free memory associated with an * entry. If something else needs to be done * to the key, i.e. decrementing a reference * count then that should be done by this * function. If this is NULL then Tcl_Free is * used to free the Tcl_HashEntry. */ }; /* * Structure definition for a hash table. Must be in tcl.h so clients can * allocate space for these structures, but clients should never access any * fields in this structure. */ #define TCL_SMALL_HASH_TABLE 4 struct Tcl_HashTable { Tcl_HashEntry **buckets; /* Pointer to bucket array. Each element * points to first entry in bucket's hash * chain, or NULL. */ Tcl_HashEntry *staticBuckets[TCL_SMALL_HASH_TABLE]; /* Bucket array used for small tables (to * avoid mallocs and frees). */ Tcl_Size numBuckets; /* Total number of buckets allocated at * **bucketPtr. */ Tcl_Size numEntries; /* Total number of entries present in * table. */ Tcl_Size rebuildSize; /* Enlarge table when numEntries gets to be * this large. */ #if TCL_MAJOR_VERSION > 8 size_t mask; /* Mask value used in hashing function. */ #endif int downShift; /* Shift count used in hashing function. * Designed to use high-order bits of * randomized keys. */ #if TCL_MAJOR_VERSION < 9 int mask; /* Mask value used in hashing function. */ #endif int keyType; /* Type of keys used in this table. It's * either TCL_CUSTOM_KEYS, TCL_STRING_KEYS, * TCL_ONE_WORD_KEYS, or an integer giving the * number of ints that is the size of the * key. */ Tcl_HashEntry *(*findProc) (Tcl_HashTable *tablePtr, const char *key); Tcl_HashEntry *(*createProc) (Tcl_HashTable *tablePtr, const char *key, int *newPtr); const Tcl_HashKeyType *typePtr; /* Type of the keys used in the * Tcl_HashTable. */ }; /* * Structure definition for information used to keep track of searches through * hash tables: */ typedef struct Tcl_HashSearch { Tcl_HashTable *tablePtr; /* Table being searched. */ Tcl_Size nextIndex; /* Index of next bucket to be enumerated after * present one. */ Tcl_HashEntry *nextEntryPtr;/* Next entry to be enumerated in the current * bucket. */ } Tcl_HashSearch; /* * Acceptable key types for hash tables: * * TCL_STRING_KEYS: The keys are strings, they are copied into the * entry. * TCL_ONE_WORD_KEYS: The keys are pointers, the pointer is stored * in the entry. * TCL_CUSTOM_TYPE_KEYS: The keys are arbitrary types which are copied * into the entry. * TCL_CUSTOM_PTR_KEYS: The keys are pointers to arbitrary types, the * pointer is stored in the entry. * * While maintaining binary compatibility the above have to be distinct values * as they are used to differentiate between old versions of the hash table * which don't have a typePtr and new ones which do. Once binary compatibility * is discarded in favour of making more wide spread changes TCL_STRING_KEYS * can be the same as TCL_CUSTOM_TYPE_KEYS, and TCL_ONE_WORD_KEYS can be the * same as TCL_CUSTOM_PTR_KEYS because they simply determine how the key is * accessed from the entry and not the behaviour. */ #define TCL_STRING_KEYS (0) #define TCL_ONE_WORD_KEYS (1) #define TCL_CUSTOM_TYPE_KEYS (-2) #define TCL_CUSTOM_PTR_KEYS (-1) /* * Structure definition for information used to keep track of searches through * dictionaries. These fields should not be accessed by code outside * tclDictObj.c */ typedef struct { void *next; /* Search position for underlying hash * table. */ TCL_HASH_TYPE epoch; /* Epoch marker for dictionary being searched, * or 0 if search has terminated. */ Tcl_Dict dictionaryPtr; /* Reference to dictionary being searched. */ } Tcl_DictSearch; /* *---------------------------------------------------------------------------- * Flag values to pass to Tcl_DoOneEvent to disable searches for some kinds of * events: */ #define TCL_DONT_WAIT (1<<1) #define TCL_WINDOW_EVENTS (1<<2) #define TCL_FILE_EVENTS (1<<3) #define TCL_TIMER_EVENTS (1<<4) #define TCL_IDLE_EVENTS (1<<5) /* WAS 0x10 ???? */ #define TCL_ALL_EVENTS (~TCL_DONT_WAIT) /* * The following structure defines a generic event for the Tcl event system. * These are the things that are queued in calls to Tcl_QueueEvent and * serviced later by Tcl_DoOneEvent. There can be many different kinds of * events with different fields, corresponding to window events, timer events, * etc. The structure for a particular event consists of a Tcl_Event header * followed by additional information specific to that event. */ struct Tcl_Event { Tcl_EventProc *proc; /* Function to call to service this event. */ struct Tcl_Event *nextPtr; /* Next in list of pending events, or NULL. */ }; /* * Positions to pass to Tcl_QueueEvent/Tcl_ThreadQueueEvent: */ typedef enum { TCL_QUEUE_TAIL, TCL_QUEUE_HEAD, TCL_QUEUE_MARK, TCL_QUEUE_ALERT_IF_EMPTY=4 } Tcl_QueuePosition; /* * Values to pass to Tcl_SetServiceMode to specify the behavior of notifier * event routines. */ #define TCL_SERVICE_NONE 0 #define TCL_SERVICE_ALL 1 /* * The following structure keeps is used to hold a time value, either as an * absolute time (the number of seconds from the epoch) or as an elapsed time. * On Unix systems the epoch is Midnight Jan 1, 1970 GMT. */ typedef struct Tcl_Time { #if TCL_MAJOR_VERSION > 8 long long sec; /* Seconds. */ #else long sec; /* Seconds. */ #endif #if defined(_CYGWIN_) && TCL_MAJOR_VERSION > 8 int usec; /* Microseconds. */ #else long usec; /* Microseconds. */ #endif } Tcl_Time; typedef void (Tcl_SetTimerProc) (const Tcl_Time *timePtr); typedef int (Tcl_WaitForEventProc) (const Tcl_Time *timePtr); /* * TIP #233 (Virtualized Time) */ typedef void (Tcl_GetTimeProc) (Tcl_Time *timebuf, void *clientData); typedef void (Tcl_ScaleTimeProc) (Tcl_Time *timebuf, void *clientData); /* *---------------------------------------------------------------------------- * Bits to pass to Tcl_CreateFileHandler and Tcl_CreateChannelHandler to * indicate what sorts of events are of interest: */ #define TCL_READABLE (1<<1) #define TCL_WRITABLE (1<<2) #define TCL_EXCEPTION (1<<3) /* * Flag values to pass to Tcl_OpenCommandChannel to indicate the disposition * of the stdio handles. TCL_STDIN, TCL_STDOUT, TCL_STDERR, are also used in * Tcl_GetStdChannel. */ #define TCL_STDIN (1<<1) #define TCL_STDOUT (1<<2) #define TCL_STDERR (1<<3) #define TCL_ENFORCE_MODE (1<<4) /* * Bits passed to Tcl_DriverClose2Proc to indicate which side of a channel * should be closed. */ #define TCL_CLOSE_READ (1<<1) #define TCL_CLOSE_WRITE (1<<2) /* * Value to use as the closeProc for a channel that supports the close2Proc * interface. */ #if TCL_MAJOR_VERSION > 8 # define TCL_CLOSE2PROC NULL #else # define TCL_CLOSE2PROC ((void *) 1) #endif /* * Channel version tag. This was introduced in 8.3.2/8.4. */ #define TCL_CHANNEL_VERSION_5 ((Tcl_ChannelTypeVersion) 0x5) /* * TIP #218: Channel Actions, Ids for Tcl_DriverThreadActionProc. */ #define TCL_CHANNEL_THREAD_INSERT (0) #define TCL_CHANNEL_THREAD_REMOVE (1) /* * Typedefs for the various operations in a channel type: */ typedef int (Tcl_DriverBlockModeProc) (void *instanceData, int mode); typedef void Tcl_DriverCloseProc; typedef int (Tcl_DriverClose2Proc) (void *instanceData, Tcl_Interp *interp, int flags); typedef int (Tcl_DriverInputProc) (void *instanceData, char *buf, int toRead, int *errorCodePtr); typedef int (Tcl_DriverOutputProc) (void *instanceData, const char *buf, int toWrite, int *errorCodePtr); typedef void Tcl_DriverSeekProc; typedef int (Tcl_DriverSetOptionProc) (void *instanceData, Tcl_Interp *interp, const char *optionName, const char *value); typedef int (Tcl_DriverGetOptionProc) (void *instanceData, Tcl_Interp *interp, const char *optionName, Tcl_DString *dsPtr); typedef void (Tcl_DriverWatchProc) (void *instanceData, int mask); typedef int (Tcl_DriverGetHandleProc) (void *instanceData, int direction, void **handlePtr); typedef int (Tcl_DriverFlushProc) (void *instanceData); typedef int (Tcl_DriverHandlerProc) (void *instanceData, int interestMask); typedef long long (Tcl_DriverWideSeekProc) (void *instanceData, long long offset, int mode, int *errorCodePtr); /* * TIP #218, Channel Thread Actions */ typedef void (Tcl_DriverThreadActionProc) (void *instanceData, int action); /* * TIP #208, File Truncation (etc.) */ typedef int (Tcl_DriverTruncateProc) (void *instanceData, long long length); /* * struct Tcl_ChannelType: * * One such structure exists for each type (kind) of channel. It collects * together in one place all the functions that are part of the specific * channel type. * * It is recommend that the Tcl_Channel* functions are used to access elements * of this structure, instead of direct accessing. */ typedef struct Tcl_ChannelType { const char *typeName; /* The name of the channel type in Tcl * commands. This storage is owned by channel * type. */ Tcl_ChannelTypeVersion version; /* Version of the channel type. */ void *closeProc; /* Not used any more. */ Tcl_DriverInputProc *inputProc; /* Function to call for input on channel. */ Tcl_DriverOutputProc *outputProc; /* Function to call for output on channel. */ void *seekProc; /* Not used any more. */ Tcl_DriverSetOptionProc *setOptionProc; /* Set an option on a channel. */ Tcl_DriverGetOptionProc *getOptionProc; /* Get an option from a channel. */ Tcl_DriverWatchProc *watchProc; /* Set up the notifier to watch for events on * this channel. */ Tcl_DriverGetHandleProc *getHandleProc; /* Get an OS handle from the channel or NULL * if not supported. */ Tcl_DriverClose2Proc *close2Proc; /* Function to call to close the channel if * the device supports closing the read & * write sides independently. */ Tcl_DriverBlockModeProc *blockModeProc; /* Set blocking mode for the raw channel. May * be NULL. */ Tcl_DriverFlushProc *flushProc; /* Function to call to flush a channel. May be * NULL. */ Tcl_DriverHandlerProc *handlerProc; /* Function to call to handle a channel event. * This will be passed up the stacked channel * chain. */ Tcl_DriverWideSeekProc *wideSeekProc; /* Function to call to seek on the channel * which can handle 64-bit offsets. May be * NULL, and must be NULL if seekProc is * NULL. */ Tcl_DriverThreadActionProc *threadActionProc; /* Function to call to notify the driver of * thread specific activity for a channel. May * be NULL. */ Tcl_DriverTruncateProc *truncateProc; /* Function to call to truncate the underlying * file to a particular length. May be NULL if * the channel does not support truncation. */ } Tcl_ChannelType; /* * The following flags determine whether the blockModeProc above should set * the channel into blocking or nonblocking mode. They are passed as arguments * to the blockModeProc function in the above structure. */ #define TCL_MODE_BLOCKING 0 /* Put channel into blocking mode. */ #define TCL_MODE_NONBLOCKING 1 /* Put channel into nonblocking * mode. */ /* *---------------------------------------------------------------------------- * Enum for different types of file paths. */ typedef enum Tcl_PathType { TCL_PATH_ABSOLUTE, TCL_PATH_RELATIVE, TCL_PATH_VOLUME_RELATIVE } Tcl_PathType; /* * The following structure is used to pass glob type data amongst the various * glob routines and Tcl_FSMatchInDirectory. */ typedef struct Tcl_GlobTypeData { int type; /* Corresponds to bcdpfls as in 'find -t'. */ int perm; /* Corresponds to file permissions. */ Tcl_Obj *macType; /* Acceptable Mac type. */ Tcl_Obj *macCreator; /* Acceptable Mac creator. */ } Tcl_GlobTypeData; /* * Type and permission definitions for glob command. */ #define TCL_GLOB_TYPE_BLOCK (1<<0) #define TCL_GLOB_TYPE_CHAR (1<<1) #define TCL_GLOB_TYPE_DIR (1<<2) #define TCL_GLOB_TYPE_PIPE (1<<3) #define TCL_GLOB_TYPE_FILE (1<<4) #define TCL_GLOB_TYPE_LINK (1<<5) #define TCL_GLOB_TYPE_SOCK (1<<6) #define TCL_GLOB_TYPE_MOUNT (1<<7) #define TCL_GLOB_PERM_RONLY (1<<0) #define TCL_GLOB_PERM_HIDDEN (1<<1) #define TCL_GLOB_PERM_R (1<<2) #define TCL_GLOB_PERM_W (1<<3) #define TCL_GLOB_PERM_X (1<<4) /* * Flags for the unload callback function. */ #define TCL_UNLOAD_DETACH_FROM_INTERPRETER (1<<0) #define TCL_UNLOAD_DETACH_FROM_PROCESS (1<<1) /* * Typedefs for the various filesystem operations: */ typedef int (Tcl_FSStatProc) (Tcl_Obj *pathPtr, Tcl_StatBuf *buf); typedef int (Tcl_FSAccessProc) (Tcl_Obj *pathPtr, int mode); typedef Tcl_Channel (Tcl_FSOpenFileChannelProc) (Tcl_Interp *interp, Tcl_Obj *pathPtr, int mode, int permissions); typedef int (Tcl_FSMatchInDirectoryProc) (Tcl_Interp *interp, Tcl_Obj *result, Tcl_Obj *pathPtr, const char *pattern, Tcl_GlobTypeData *types); typedef Tcl_Obj * (Tcl_FSGetCwdProc) (Tcl_Interp *interp); typedef int (Tcl_FSChdirProc) (Tcl_Obj *pathPtr); typedef int (Tcl_FSLstatProc) (Tcl_Obj *pathPtr, Tcl_StatBuf *buf); typedef int (Tcl_FSCreateDirectoryProc) (Tcl_Obj *pathPtr); typedef int (Tcl_FSDeleteFileProc) (Tcl_Obj *pathPtr); typedef int (Tcl_FSCopyDirectoryProc) (Tcl_Obj *srcPathPtr, Tcl_Obj *destPathPtr, Tcl_Obj **errorPtr); typedef int (Tcl_FSCopyFileProc) (Tcl_Obj *srcPathPtr, Tcl_Obj *destPathPtr); typedef int (Tcl_FSRemoveDirectoryProc) (Tcl_Obj *pathPtr, int recursive, Tcl_Obj **errorPtr); typedef int (Tcl_FSRenameFileProc) (Tcl_Obj *srcPathPtr, Tcl_Obj *destPathPtr); typedef void (Tcl_FSUnloadFileProc) (Tcl_LoadHandle loadHandle); typedef Tcl_Obj * (Tcl_FSListVolumesProc) (void); /* We have to declare the utime structure here. */ struct utimbuf; typedef int (Tcl_FSUtimeProc) (Tcl_Obj *pathPtr, struct utimbuf *tval); typedef int (Tcl_FSNormalizePathProc) (Tcl_Interp *interp, Tcl_Obj *pathPtr, int nextCheckpoint); typedef int (Tcl_FSFileAttrsGetProc) (Tcl_Interp *interp, int index, Tcl_Obj *pathPtr, Tcl_Obj **objPtrRef); typedef const char *const * (Tcl_FSFileAttrStringsProc) (Tcl_Obj *pathPtr, Tcl_Obj **objPtrRef); typedef int (Tcl_FSFileAttrsSetProc) (Tcl_Interp *interp, int index, Tcl_Obj *pathPtr, Tcl_Obj *objPtr); typedef Tcl_Obj * (Tcl_FSLinkProc) (Tcl_Obj *pathPtr, Tcl_Obj *toPtr, int linkType); typedef int (Tcl_FSLoadFileProc) (Tcl_Interp *interp, Tcl_Obj *pathPtr, Tcl_LoadHandle *handlePtr, Tcl_FSUnloadFileProc **unloadProcPtr); typedef int (Tcl_FSPathInFilesystemProc) (Tcl_Obj *pathPtr, void **clientDataPtr); typedef Tcl_Obj * (Tcl_FSFilesystemPathTypeProc) (Tcl_Obj *pathPtr); typedef Tcl_Obj * (Tcl_FSFilesystemSeparatorProc) (Tcl_Obj *pathPtr); #define Tcl_FSFreeInternalRepProc Tcl_FreeProc typedef void *(Tcl_FSDupInternalRepProc) (void *clientData); typedef Tcl_Obj * (Tcl_FSInternalToNormalizedProc) (void *clientData); typedef void *(Tcl_FSCreateInternalRepProc) (Tcl_Obj *pathPtr); typedef struct Tcl_FSVersion_ *Tcl_FSVersion; /* *---------------------------------------------------------------------------- * Data structures related to hooking into the filesystem */ /* * Filesystem version tag. This was introduced in 8.4. */ #define TCL_FILESYSTEM_VERSION_1 ((Tcl_FSVersion) 0x1) /* * struct Tcl_Filesystem: * * One such structure exists for each type (kind) of filesystem. It collects * together the functions that form the interface for a particulr the * filesystem. Tcl always accesses the filesystem through one of these * structures. * * Not all entries need be non-NULL; any which are NULL are simply ignored. * However, a complete filesystem should provide all of these functions. The * explanations in the structure show the importance of each function. */ typedef struct Tcl_Filesystem { const char *typeName; /* The name of the filesystem. */ Tcl_Size structureLength; /* Length of this structure, so future binary * compatibility can be assured. */ Tcl_FSVersion version; /* Version of the filesystem type. */ Tcl_FSPathInFilesystemProc *pathInFilesystemProc; /* Determines whether the pathname is in this * filesystem. This is the most important * filesystem function. */ Tcl_FSDupInternalRepProc *dupInternalRepProc; /* Duplicates the internal handle of the node. * If it is NULL, the filesystem is less * performant. */ Tcl_FSFreeInternalRepProc *freeInternalRepProc; /* Frees the internal handle of the node. NULL * only if there is no need to free resources * used for the internal handle. */ Tcl_FSInternalToNormalizedProc *internalToNormalizedProc; /* Converts the internal handle to a normalized * path. NULL if the filesystem creates nodes * having no pathname. */ Tcl_FSCreateInternalRepProc *createInternalRepProc; /* Creates an internal handle for a pathname. * May be NULL if pathnames have no internal * handle or if pathInFilesystemProc always * immediately creates an internal * representation for pathnames in the * filesystem. */ Tcl_FSNormalizePathProc *normalizePathProc; /* Normalizes a path. Should be implemented if * the filesystems supports multiple paths to * the same node. */ Tcl_FSFilesystemPathTypeProc *filesystemPathTypeProc; /* Determines the type of a path in this * filesystem. May be NULL. */ Tcl_FSFilesystemSeparatorProc *filesystemSeparatorProc; /* Produces the separator character(s) for this * filesystem. Must not be NULL. */ Tcl_FSStatProc *statProc; /* Called by 'Tcl_FSStat()'. Provided by any * reasonable filesystem. */ Tcl_FSAccessProc *accessProc; /* Called by 'Tcl_FSAccess()'. Implemented by * any reasonable filesystem. */ Tcl_FSOpenFileChannelProc *openFileChannelProc; /* Called by 'Tcl_FSOpenFileChannel()'. * Provided by any reasonable filesystem. */ Tcl_FSMatchInDirectoryProc *matchInDirectoryProc; /* Called by 'Tcl_FSMatchInDirectory()'. NULL * if the filesystem does not support glob or * recursive copy. */ Tcl_FSUtimeProc *utimeProc; /* Called by 'Tcl_FSUtime()', by 'file * mtime' to set (not read) times, 'file * atime', and the open-r/open-w/fcopy variant * of 'file copy'. */ Tcl_FSLinkProc *linkProc; /* Called by 'Tcl_FSLink()'. NULL if reading or * creating links is not supported. */ Tcl_FSListVolumesProc *listVolumesProc; /* Lists filesystem volumes added by this * filesystem. NULL if the filesystem does not * use volumes. */ Tcl_FSFileAttrStringsProc *fileAttrStringsProc; /* List all valid attributes strings. NULL if * the filesystem does not support the 'file * attributes' command. Can be used to attach * arbitrary additional data to files in a * filesystem. */ Tcl_FSFileAttrsGetProc *fileAttrsGetProc; /* Called by 'Tcl_FSFileAttrsGet()' and by * 'file attributes'. */ Tcl_FSFileAttrsSetProc *fileAttrsSetProc; /* Called by 'Tcl_FSFileAttrsSet()' and by * 'file attributes'. */ Tcl_FSCreateDirectoryProc *createDirectoryProc; /* Called by 'Tcl_FSCreateDirectory()'. May be * NULL if the filesystem is read-only. */ Tcl_FSRemoveDirectoryProc *removeDirectoryProc; /* Called by 'Tcl_FSRemoveDirectory()'. May be * NULL if the filesystem is read-only. */ Tcl_FSDeleteFileProc *deleteFileProc; /* Called by 'Tcl_FSDeleteFile()' May be NULL * if the filesystem is is read-only. */ Tcl_FSCopyFileProc *copyFileProc; /* Called by 'Tcl_FSCopyFile()'. If NULL, for * a copy operation at the script level (not * C) Tcl uses open-r, open-w and fcopy. */ Tcl_FSRenameFileProc *renameFileProc; /* Called by 'Tcl_FSRenameFile()'. If NULL, for * a rename operation at the script level (not * C) Tcl performs a copy operation followed * by a delete operation. */ Tcl_FSCopyDirectoryProc *copyDirectoryProc; /* Called by 'Tcl_FSCopyDirectory()'. If NULL, * for a copy operation at the script level * (not C) Tcl recursively creates directories * and copies files. */ Tcl_FSLstatProc *lstatProc; /* Called by 'Tcl_FSLstat()'. If NULL, Tcl * attempts to use 'statProc' instead. */ Tcl_FSLoadFileProc *loadFileProc; /* Called by 'Tcl_FSLoadFile()'. If NULL, Tcl * performs a copy to a temporary file in the * native filesystem and then calls * Tcl_FSLoadFile() on that temporary copy. */ Tcl_FSGetCwdProc *getCwdProc; /* Called by 'Tcl_FSGetCwd()'. Normally NULL. * Usually only called once: If 'getcwd' is * called before 'chdir' is ever called. */ Tcl_FSChdirProc *chdirProc; /* Called by 'Tcl_FSChdir()'. For a virtual * filesystem, chdirProc just returns zero * (success) if the pathname is a valid * directory, and some other value otherwise. * For A real filesystem, chdirProc performs * the correct action, e.g. calls the system * 'chdir' function. If not implemented, then * 'cd' and 'pwd' fail for a pathname in this * filesystem. On success Tcl stores the * pathname for use by GetCwd. If NULL, Tcl * performs records the pathname as the new * current directory if it passes a series of * directory access checks. */ } Tcl_Filesystem; /* * The following definitions are used as values for the 'linkAction' flag to * Tcl_FSLink, or the linkProc of any filesystem. Any combination of flags can * be given. For link creation, the linkProc should create a link which * matches any of the types given. * * TCL_CREATE_SYMBOLIC_LINK - Create a symbolic or soft link. * TCL_CREATE_HARD_LINK - Create a hard link. */ #define TCL_CREATE_SYMBOLIC_LINK 0x01 #define TCL_CREATE_HARD_LINK 0x02 /* *---------------------------------------------------------------------------- * The following structure represents the Notifier functions that you can * override with the Tcl_SetNotifier call. */ typedef struct Tcl_NotifierProcs { Tcl_SetTimerProc *setTimerProc; Tcl_WaitForEventProc *waitForEventProc; Tcl_CreateFileHandlerProc *createFileHandlerProc; Tcl_DeleteFileHandlerProc *deleteFileHandlerProc; Tcl_InitNotifierProc *initNotifierProc; Tcl_FinalizeNotifierProc *finalizeNotifierProc; Tcl_AlertNotifierProc *alertNotifierProc; Tcl_ServiceModeHookProc *serviceModeHookProc; } Tcl_NotifierProcs; /* *---------------------------------------------------------------------------- * The following data structures and declarations are for the new Tcl parser. * * For each word of a command, and for each piece of a word such as a variable * reference, one of the following structures is created to describe the * token. */ typedef struct Tcl_Token { int type; /* Type of token, such as TCL_TOKEN_WORD; see * below for valid types. */ const char *start; /* First character in token. */ Tcl_Size size; /* Number of bytes in token. */ Tcl_Size numComponents; /* If this token is composed of other tokens, * this field tells how many of them there are * (including components of components, etc.). * The component tokens immediately follow * this one. */ } Tcl_Token; /* * Type values defined for Tcl_Token structures. These values are defined as * mask bits so that it's easy to check for collections of types. * * TCL_TOKEN_WORD - The token describes one word of a command, * from the first non-blank character of the word * (which may be " or {) up to but not including * the space, semicolon, or bracket that * terminates the word. NumComponents counts the * total number of sub-tokens that make up the * word. This includes, for example, sub-tokens * of TCL_TOKEN_VARIABLE tokens. * TCL_TOKEN_SIMPLE_WORD - This token is just like TCL_TOKEN_WORD except * that the word is guaranteed to consist of a * single TCL_TOKEN_TEXT sub-token. * TCL_TOKEN_TEXT - The token describes a range of literal text * that is part of a word. NumComponents is * always 0. * TCL_TOKEN_BS - The token describes a backslash sequence that * must be collapsed. NumComponents is always 0. * TCL_TOKEN_COMMAND - The token describes a command whose result * must be substituted into the word. The token * includes the enclosing brackets. NumComponents * is always 0. * TCL_TOKEN_VARIABLE - The token describes a variable substitution, * including the dollar sign, variable name, and * array index (if there is one) up through the * right parentheses. NumComponents tells how * many additional tokens follow to represent the * variable name. The first token will be a * TCL_TOKEN_TEXT token that describes the * variable name. If the variable is an array * reference then there will be one or more * additional tokens, of type TCL_TOKEN_TEXT, * TCL_TOKEN_BS, TCL_TOKEN_COMMAND, and * TCL_TOKEN_VARIABLE, that describe the array * index; numComponents counts the total number * of nested tokens that make up the variable * reference, including sub-tokens of * TCL_TOKEN_VARIABLE tokens. * TCL_TOKEN_SUB_EXPR - The token describes one subexpression of an * expression, from the first non-blank character * of the subexpression up to but not including * the space, brace, or bracket that terminates * the subexpression. NumComponents counts the * total number of following subtokens that make * up the subexpression; this includes all * subtokens for any nested TCL_TOKEN_SUB_EXPR * tokens. For example, a numeric value used as a * primitive operand is described by a * TCL_TOKEN_SUB_EXPR token followed by a * TCL_TOKEN_TEXT token. A binary subexpression * is described by a TCL_TOKEN_SUB_EXPR token * followed by the TCL_TOKEN_OPERATOR token for * the operator, then TCL_TOKEN_SUB_EXPR tokens * for the left then the right operands. * TCL_TOKEN_OPERATOR - The token describes one expression operator. * An operator might be the name of a math * function such as "abs". A TCL_TOKEN_OPERATOR * token is always preceded by one * TCL_TOKEN_SUB_EXPR token for the operator's * subexpression, and is followed by zero or more * TCL_TOKEN_SUB_EXPR tokens for the operator's * operands. NumComponents is always 0. * TCL_TOKEN_EXPAND_WORD - This token is just like TCL_TOKEN_WORD except * that it marks a word that began with the * literal character prefix "{*}". This word is * marked to be expanded - that is, broken into * words after substitution is complete. */ #define TCL_TOKEN_WORD 1 #define TCL_TOKEN_SIMPLE_WORD 2 #define TCL_TOKEN_TEXT 4 #define TCL_TOKEN_BS 8 #define TCL_TOKEN_COMMAND 16 #define TCL_TOKEN_VARIABLE 32 #define TCL_TOKEN_SUB_EXPR 64 #define TCL_TOKEN_OPERATOR 128 #define TCL_TOKEN_EXPAND_WORD 256 /* * Parsing error types. On any parsing error, one of these values will be * stored in the error field of the Tcl_Parse structure defined below. */ #define TCL_PARSE_SUCCESS 0 #define TCL_PARSE_QUOTE_EXTRA 1 #define TCL_PARSE_BRACE_EXTRA 2 #define TCL_PARSE_MISSING_BRACE 3 #define TCL_PARSE_MISSING_BRACKET 4 #define TCL_PARSE_MISSING_PAREN 5 #define TCL_PARSE_MISSING_QUOTE 6 #define TCL_PARSE_MISSING_VAR_BRACE 7 #define TCL_PARSE_SYNTAX 8 #define TCL_PARSE_BAD_NUMBER 9 /* * A structure of the following type is filled in by Tcl_ParseCommand. It * describes a single command parsed from an input string. */ #define NUM_STATIC_TOKENS 20 typedef struct Tcl_Parse { const char *commentStart; /* Pointer to # that begins the first of one * or more comments preceding the command. */ Tcl_Size commentSize; /* Number of bytes in comments (up through * newline character that terminates the last * comment). If there were no comments, this * field is 0. */ const char *commandStart; /* First character in first word of * command. */ Tcl_Size commandSize; /* Number of bytes in command, including first * character of first word, up through the * terminating newline, close bracket, or * semicolon. */ Tcl_Size numWords; /* Total number of words in command. May be * 0. */ Tcl_Token *tokenPtr; /* Pointer to first token representing the * words of the command. Initially points to * staticTokens, but may change to point to * malloc-ed space if command exceeds space in * staticTokens. */ Tcl_Size numTokens; /* Total number of tokens in command. */ Tcl_Size tokensAvailable; /* Total number of tokens available at * *tokenPtr. */ int errorType; /* One of the parsing error types defined * above. */ #if TCL_MAJOR_VERSION > 8 int incomplete; /* This field is set to 1 by Tcl_ParseCommand * if the command appears to be incomplete. * This information is used by * Tcl_CommandComplete. */ #endif /* * The fields below are intended only for the private use of the parser. * They should not be used by functions that invoke Tcl_ParseCommand. */ const char *string; /* The original command string passed to * Tcl_ParseCommand. */ const char *end; /* Points to the character just after the last * one in the command string. */ Tcl_Interp *interp; /* Interpreter to use for error reporting, or * NULL. */ const char *term; /* Points to character in string that * terminated most recent token. Filled in by * ParseTokens. If an error occurs, points to * beginning of region where the error * occurred (e.g. the open brace if the close * brace is missing). */ #if TCL_MAJOR_VERSION < 9 int incomplete; #endif Tcl_Token staticTokens[NUM_STATIC_TOKENS]; /* Initial space for tokens for command. This * space should be large enough to accommodate * most commands; dynamic space is allocated * for very large commands that don't fit * here. */ } Tcl_Parse; /* *---------------------------------------------------------------------------- * The following structure represents a user-defined encoding. It collects * together all the functions that are used by the specific encoding. */ typedef struct Tcl_EncodingType { const char *encodingName; /* The name of the encoding, e.g. "euc-jp". * This name is the unique key for this * encoding type. */ Tcl_EncodingConvertProc *toUtfProc; /* Function to convert from external encoding * into UTF-8. */ Tcl_EncodingConvertProc *fromUtfProc; /* Function to convert from UTF-8 into * external encoding. */ Tcl_FreeProc *freeProc; /* If non-NULL, function to call when this * encoding is deleted. */ void *clientData; /* Arbitrary value associated with encoding * type. Passed to conversion functions. */ Tcl_Size nullSize; /* Number of zero bytes that signify * end-of-string in this encoding. This number * is used to determine the source string * length when the srcLen argument is * negative. Must be 1, 2, or 4. */ } Tcl_EncodingType; /* * The following definitions are used as values for the conversion control * flags argument when converting text from one character set to another: * * TCL_ENCODING_START - Signifies that the source buffer is the first * block in a (potentially multi-block) input * stream. Tells the conversion function to reset * to an initial state and perform any * initialization that needs to occur before the * first byte is converted. If the source buffer * contains the entire input stream to be * converted, this flag should be set. * TCL_ENCODING_END - Signifies that the source buffer is the last * block in a (potentially multi-block) input * stream. Tells the conversion routine to * perform any finalization that needs to occur * after the last byte is converted and then to * reset to an initial state. If the source * buffer contains the entire input stream to be * converted, this flag should be set. * TCL_ENCODING_STOPONERROR - Not used any more. * TCL_ENCODING_NO_TERMINATE - If set, Tcl_ExternalToUtf does not append a * terminating NUL byte. Since it does not need * an extra byte for a terminating NUL, it fills * all dstLen bytes with encoded UTF-8 content if * needed. If clear, a byte is reserved in the * dst space for NUL termination, and a * terminating NUL is appended. * TCL_ENCODING_CHAR_LIMIT - If set and dstCharsPtr is not NULL, then * Tcl_ExternalToUtf takes the initial value of * *dstCharsPtr as a limit of the maximum number * of chars to produce in the encoded UTF-8 * content. Otherwise, the number of chars * produced is controlled only by other limiting * factors. * TCL_ENCODING_PROFILE_* - Mutually exclusive encoding profile ids. Note * these are bit masks. * * NOTE: THESE BIT DEFINITIONS SHOULD NOT OVERLAP WITH INTERNAL USE BITS * DEFINED IN tclEncoding.c (ENCODING_INPUT et al). Be cognizant of this * when adding bits. */ #define TCL_ENCODING_START 0x01 #define TCL_ENCODING_END 0x02 #if TCL_MAJOR_VERSION > 8 # define TCL_ENCODING_STOPONERROR 0x0 /* Not used any more */ #else # define TCL_ENCODING_STOPONERROR 0x04 #endif #define TCL_ENCODING_NO_TERMINATE 0x08 #define TCL_ENCODING_CHAR_LIMIT 0x10 /* Internal use bits, do not define bits in this space. See above comment */ #define TCL_ENCODING_INTERNAL_USE_MASK 0xFF00 /* * Reserve top byte for profile values (disjoint, not a mask). In case of * changes, ensure ENCODING_PROFILE_* macros in tclInt.h are modified if * necessary. */ #define TCL_ENCODING_PROFILE_STRICT TCL_ENCODING_STOPONERROR #define TCL_ENCODING_PROFILE_TCL8 0x01000000 #define TCL_ENCODING_PROFILE_REPLACE 0x02000000 /* * The following definitions are the error codes returned by the conversion * routines: * * TCL_OK - All characters were converted. * TCL_CONVERT_NOSPACE - The output buffer would not have been large * enough for all of the converted data; as many * characters as could fit were converted though. * TCL_CONVERT_MULTIBYTE - The last few bytes in the source string were * the beginning of a multibyte sequence, but * more bytes were needed to complete this * sequence. A subsequent call to the conversion * routine should pass the beginning of this * unconverted sequence plus additional bytes * from the source stream to properly convert the * formerly split-up multibyte sequence. * TCL_CONVERT_SYNTAX - The source stream contained an invalid * character sequence. This may occur if the * input stream has been damaged or if the input * encoding method was misidentified. * TCL_CONVERT_UNKNOWN - The source string contained a character that * could not be represented in the target * encoding. */ #define TCL_CONVERT_MULTIBYTE (-1) #define TCL_CONVERT_SYNTAX (-2) #define TCL_CONVERT_UNKNOWN (-3) #define TCL_CONVERT_NOSPACE (-4) /* * The maximum number of bytes that are necessary to represent a single * Unicode character in UTF-8. The valid values are 3 and 4. If > 3, * then Tcl_UniChar must be 4-bytes in size (UCS-4) (the default). If == 3, * then Tcl_UniChar must be 2-bytes in size (UTF-16). Since Tcl 9.0, UCS-4 * mode is the default and recommended mode. */ #ifndef TCL_UTF_MAX # if TCL_MAJOR_VERSION > 8 # define TCL_UTF_MAX 4 # else # define TCL_UTF_MAX 3 # endif #endif /* * This represents a Unicode character. Any changes to this should also be * reflected in regcustom.h. */ #if TCL_UTF_MAX == 4 /* * int isn't 100% accurate as it should be a strict 4-byte value * (perhaps int32_t). ILP64/SILP64 systems may have troubles. The * size of this value must be reflected correctly in regcustom.h. */ typedef int Tcl_UniChar; #elif TCL_UTF_MAX == 3 && !defined(BUILD_tcl) typedef unsigned short Tcl_UniChar; #else # error "This TCL_UTF_MAX value is not supported" #endif /* *---------------------------------------------------------------------------- * TIP #59: The following structure is used in calls 'Tcl_RegisterConfig' to * provide the system with the embedded configuration data. */ typedef struct Tcl_Config { const char *key; /* Configuration key to register. ASCII * encoded, thus UTF-8. */ const char *value; /* The value associated with the key. System * encoding. */ } Tcl_Config; /* *---------------------------------------------------------------------------- * Flags for TIP#143 limits, detailing which limits are active in an * interpreter. Used for Tcl_{Add,Remove}LimitHandler type argument. */ #define TCL_LIMIT_COMMANDS 0x01 #define TCL_LIMIT_TIME 0x02 /* * Structure containing information about a limit handler to be called when a * command- or time-limit is exceeded by an interpreter. */ typedef void (Tcl_LimitHandlerProc) (void *clientData, Tcl_Interp *interp); #if TCL_MAJOR_VERSION > 8 #define Tcl_LimitHandlerDeleteProc Tcl_FreeProc #else typedef void (Tcl_LimitHandlerDeleteProc) (void *clientData); #endif #if 0 /* *---------------------------------------------------------------------------- * We would like to provide an anonymous structure "mp_int" here, which is * compatible with libtommath's "mp_int", but without duplicating anything * from or including here. But the libtommath project * didn't honor our request. See: * * That's why this part is commented out, and we are using (void *) in * various API's in stead of the more correct (mp_int *). */ #ifndef MP_INT_DECLARED #define MP_INT_DECLARED typedef struct mp_int mp_int; #endif #endif /* *---------------------------------------------------------------------------- * Definitions needed for Tcl_ParseArgvObj routines. * Based on tkArgv.c. * Modifications from the original are copyright (c) Sam Bromley 2006 */ typedef struct { int type; /* Indicates the option type; see below. */ const char *keyStr; /* The key string that flags the option in the * argv array. */ void *srcPtr; /* Value to be used in setting dst; usage * depends on type.*/ void *dstPtr; /* Address of value to be modified; usage * depends on type.*/ const char *helpStr; /* Documentation message describing this * option. */ void *clientData; /* Word to pass to function callbacks. */ } Tcl_ArgvInfo; /* * Legal values for the type field of a Tcl_ArgInfo: see the user * documentation for details. */ #define TCL_ARGV_CONSTANT 15 #define TCL_ARGV_INT 16 #define TCL_ARGV_STRING 17 #define TCL_ARGV_REST 18 #define TCL_ARGV_FLOAT 19 #define TCL_ARGV_FUNC 20 #define TCL_ARGV_GENFUNC 21 #define TCL_ARGV_HELP 22 #define TCL_ARGV_END 23 /* * Types of callback functions for the TCL_ARGV_FUNC and TCL_ARGV_GENFUNC * argument types: */ typedef int (Tcl_ArgvFuncProc)(void *clientData, Tcl_Obj *objPtr, void *dstPtr); typedef Tcl_Size (Tcl_ArgvGenFuncProc)(void *clientData, Tcl_Interp *interp, Tcl_Size objc, Tcl_Obj *const *objv, void *dstPtr); /* * Shorthand for commonly used argTable entries. */ #define TCL_ARGV_AUTO_HELP \ {TCL_ARGV_HELP, "-help", NULL, NULL, \ "Print summary of command-line options and abort", NULL} #define TCL_ARGV_AUTO_REST \ {TCL_ARGV_REST, "--", NULL, NULL, \ "Marks the end of the options", NULL} #define TCL_ARGV_TABLE_END \ {TCL_ARGV_END, NULL, NULL, NULL, NULL, NULL} /* *---------------------------------------------------------------------------- * Definitions needed for Tcl_Zlib routines. [TIP #234] * * Constants for the format flags describing what sort of data format is * desired/expected for the Tcl_ZlibDeflate, Tcl_ZlibInflate and * Tcl_ZlibStreamInit functions. */ #define TCL_ZLIB_FORMAT_RAW 1 #define TCL_ZLIB_FORMAT_ZLIB 2 #define TCL_ZLIB_FORMAT_GZIP 4 #define TCL_ZLIB_FORMAT_AUTO 8 /* * Constants that describe whether the stream is to operate in compressing or * decompressing mode. */ #define TCL_ZLIB_STREAM_DEFLATE 16 #define TCL_ZLIB_STREAM_INFLATE 32 /* * Constants giving compression levels. Use of TCL_ZLIB_COMPRESS_DEFAULT is * recommended. */ #define TCL_ZLIB_COMPRESS_NONE 0 #define TCL_ZLIB_COMPRESS_FAST 1 #define TCL_ZLIB_COMPRESS_BEST 9 #define TCL_ZLIB_COMPRESS_DEFAULT (-1) /* * Constants for types of flushing, used with Tcl_ZlibFlush. */ #define TCL_ZLIB_NO_FLUSH 0 #define TCL_ZLIB_FLUSH 2 #define TCL_ZLIB_FULLFLUSH 3 #define TCL_ZLIB_FINALIZE 4 /* *---------------------------------------------------------------------------- * Definitions needed for the Tcl_LoadFile function. [TIP #416] */ #define TCL_LOAD_GLOBAL 1 #define TCL_LOAD_LAZY 2 /* *---------------------------------------------------------------------------- * Definitions needed for the Tcl_OpenTcpServerEx function. [TIP #456] */ #define TCL_TCPSERVER_REUSEADDR (1<<0) #define TCL_TCPSERVER_REUSEPORT (1<<1) /* * Constants for special Tcl_Size-typed values, see TIP #494 */ #define TCL_IO_FAILURE ((Tcl_Size)-1) #define TCL_AUTO_LENGTH ((Tcl_Size)-1) #define TCL_INDEX_NONE ((Tcl_Size)-1) /* *---------------------------------------------------------------------------- * Single public declaration for NRE. */ typedef int (Tcl_NRPostProc) (void *data[], Tcl_Interp *interp, int result); /* *---------------------------------------------------------------------------- * The following constant is used to test for older versions of Tcl in the * stubs tables. */ #if TCL_MAJOR_VERSION > 8 # define TCL_STUB_MAGIC ((int) 0xFCA3BACB + (int) sizeof(void *)) #else # define TCL_STUB_MAGIC ((int) 0xFCA3BACF) #endif /* * The following function is required to be defined in all stubs aware * extensions. The function is actually implemented in the stub library, not * the main Tcl library, although there is a trivial implementation in the * main library in case an extension is statically linked into an application. */ const char * Tcl_InitStubs(Tcl_Interp *interp, const char *version, int exact, int magic); const char * TclTomMathInitializeStubs(Tcl_Interp *interp, const char *version, int epoch, int revision); const char * TclInitStubTable(const char *version); void * TclStubCall(void *arg); #if defined(_WIN32) TCL_NORETURN1 void Tcl_ConsolePanic(const char *format, ...); #else # define Tcl_ConsolePanic NULL #endif #ifdef USE_TCL_STUBS #if TCL_MAJOR_VERSION < 9 # if TCL_UTF_MAX < 4 # define Tcl_InitStubs(interp, version, exact) \ (Tcl_InitStubs)(interp, version, \ (exact)|(TCL_MAJOR_VERSION<<8)|(0xFF<<16), \ TCL_STUB_MAGIC) # else # define Tcl_InitStubs(interp, version, exact) \ (Tcl_InitStubs)(interp, "8.7.0", \ (exact)|(TCL_MAJOR_VERSION<<8)|(0xFF<<16), \ TCL_STUB_MAGIC) # endif #elif TCL_RELEASE_LEVEL == TCL_FINAL_RELEASE # define Tcl_InitStubs(interp, version, exact) \ (Tcl_InitStubs)(interp, version, \ (exact)|(TCL_MAJOR_VERSION<<8)|(TCL_MINOR_VERSION<<16), \ TCL_STUB_MAGIC) #else # define Tcl_InitStubs(interp, version, exact) \ (Tcl_InitStubs)(interp, (((exact)&1) ? (version) : "9.0b2"), \ (exact)|(TCL_MAJOR_VERSION<<8)|(TCL_MINOR_VERSION<<16), \ TCL_STUB_MAGIC) #endif #else #if TCL_MAJOR_VERSION < 9 # error "Please define -DUSE_TCL_STUBS" #elif TCL_RELEASE_LEVEL == TCL_FINAL_RELEASE # define Tcl_InitStubs(interp, version, exact) \ Tcl_PkgInitStubsCheck(interp, version, \ (exact)|(TCL_MAJOR_VERSION<<8)|(TCL_MINOR_VERSION<<16)) #else # define Tcl_InitStubs(interp, version, exact) \ Tcl_PkgInitStubsCheck(interp, TCL_PATCH_LEVEL, \ 1|(TCL_MAJOR_VERSION<<8)|(TCL_MINOR_VERSION<<16)) #endif #endif /* * Public functions that are not accessible via the stubs table. * Tcl_GetMemoryInfo is needed for AOLserver. [Bug 1868171] */ #define Tcl_Main(argc, argv, proc) Tcl_MainEx(argc, argv, proc, \ ((Tcl_SetPanicProc(Tcl_ConsolePanic), Tcl_CreateInterp()))) EXTERN TCL_NORETURN void Tcl_MainEx(Tcl_Size argc, char **argv, Tcl_AppInitProc *appInitProc, Tcl_Interp *interp); EXTERN const char * Tcl_PkgInitStubsCheck(Tcl_Interp *interp, const char *version, int exact); EXTERN const char * Tcl_InitSubsystems(void); EXTERN void Tcl_GetMemoryInfo(Tcl_DString *dsPtr); EXTERN const char * Tcl_FindExecutable(const char *argv0); EXTERN const char * Tcl_SetPreInitScript(const char *string); EXTERN const char * Tcl_SetPanicProc( TCL_NORETURN1 Tcl_PanicProc *panicProc); EXTERN void Tcl_StaticLibrary(Tcl_Interp *interp, const char *prefix, Tcl_LibraryInitProc *initProc, Tcl_LibraryInitProc *safeInitProc); #ifndef TCL_NO_DEPRECATED # define Tcl_StaticPackage Tcl_StaticLibrary #endif EXTERN Tcl_ExitProc *Tcl_SetExitProc(TCL_NORETURN1 Tcl_ExitProc *proc); #ifdef _WIN32 EXTERN const char *TclZipfs_AppHook(int *argc, wchar_t ***argv); #else EXTERN const char *TclZipfs_AppHook(int *argc, char ***argv); #endif #if defined(_WIN32) && defined(UNICODE) #ifndef USE_TCL_STUBS # define Tcl_FindExecutable(arg) ((Tcl_FindExecutable)((const char *)(arg))) #endif # define Tcl_MainEx Tcl_MainExW EXTERN TCL_NORETURN void Tcl_MainExW(Tcl_Size argc, wchar_t **argv, Tcl_AppInitProc *appInitProc, Tcl_Interp *interp); #endif #if defined(USE_TCL_STUBS) && (TCL_MAJOR_VERSION > 8) #define Tcl_SetPanicProc(panicProc) \ TclInitStubTable(((const char *(*)(Tcl_PanicProc *))TclStubCall((void *)panicProc))(panicProc)) #define Tcl_InitSubsystems() \ TclInitStubTable(((const char *(*)(void))TclStubCall((void *)1))()) #define Tcl_FindExecutable(argv0) \ TclInitStubTable(((const char *(*)(const char *))TclStubCall((void *)2))(argv0)) #define TclZipfs_AppHook(argcp, argvp) \ TclInitStubTable(((const char *(*)(int *, void *))TclStubCall((void *)3))(argcp, argvp)) #define Tcl_MainExW(argc, argv, appInitProc, interp) \ (void)((const char *(*)(Tcl_Size, const void *, Tcl_AppInitProc *, Tcl_Interp *)) \ TclStubCall((void *)4))(argc, argv, appInitProc, interp) #if !defined(_WIN32) || !defined(UNICODE) #define Tcl_MainEx(argc, argv, appInitProc, interp) \ (void)((const char *(*)(Tcl_Size, const void *, Tcl_AppInitProc *, Tcl_Interp *)) \ TclStubCall((void *)5))(argc, argv, appInitProc, interp) #endif #define Tcl_StaticLibrary(interp, pkgName, initProc, safeInitProc) \ (void)((const char *(*)(Tcl_Interp *, const char *, Tcl_LibraryInitProc *, Tcl_LibraryInitProc *)) \ TclStubCall((void *)6))(interp, pkgName, initProc, safeInitProc) #define Tcl_SetExitProc(proc) \ ((Tcl_ExitProc *(*)(Tcl_ExitProc *))TclStubCall((void *)7))(proc) #define Tcl_GetMemoryInfo(dsPtr) \ (void)((const char *(*)(Tcl_DString *))TclStubCall((void *)8))(dsPtr) #define Tcl_SetPreInitScript(string) \ ((const char *(*)(const char *))TclStubCall((void *)9))(string) #endif /* *---------------------------------------------------------------------------- * Include the public function declarations that are accessible via the stubs * table. */ #include "tclDecls.h" /* * Include platform specific public function declarations that are accessible * via the stubs table. Make all TclOO symbols MODULE_SCOPE (which only * has effect on building it as a shared library). See ticket [3010352]. */ #if defined(BUILD_tcl) # undef TCLAPI # define TCLAPI MODULE_SCOPE #endif #include "tclPlatDecls.h" /* *---------------------------------------------------------------------------- * The following declarations map ckalloc and ckfree to Tcl_Alloc and * Tcl_Free for use in Tcl-8.x-compatible extensions. */ #ifndef BUILD_tcl # define ckalloc Tcl_Alloc # define attemptckalloc Tcl_AttemptAlloc # ifdef _MSC_VER /* Silence invalid C4090 warnings */ # define ckfree(a) Tcl_Free((void *)(a)) # define ckrealloc(a,b) Tcl_Realloc((void *)(a),(b)) # define attemptckrealloc(a,b) Tcl_AttemptRealloc((void *)(a),(b)) # else # define ckfree Tcl_Free # define ckrealloc Tcl_Realloc # define attemptckrealloc Tcl_AttemptRealloc # endif #endif #ifndef TCL_MEM_DEBUG /* * If we are not using the debugging allocator, we should call the Tcl_Alloc, * et al. routines in order to guarantee that every module is using the same * memory allocator both inside and outside of the Tcl library. */ # undef Tcl_InitMemory # define Tcl_InitMemory(x) # undef Tcl_DumpActiveMemory # define Tcl_DumpActiveMemory(x) # undef Tcl_ValidateAllMemory # define Tcl_ValidateAllMemory(x,y) #endif /* !TCL_MEM_DEBUG */ #ifdef TCL_MEM_DEBUG # undef Tcl_IncrRefCount # define Tcl_IncrRefCount(objPtr) \ Tcl_DbIncrRefCount(objPtr, __FILE__, __LINE__) # undef Tcl_DecrRefCount # define Tcl_DecrRefCount(objPtr) \ Tcl_DbDecrRefCount(objPtr, __FILE__, __LINE__) # undef Tcl_IsShared # define Tcl_IsShared(objPtr) \ Tcl_DbIsShared(objPtr, __FILE__, __LINE__) /* * Free the Obj by effectively doing: * * Tcl_IncrRefCount(objPtr); * Tcl_DecrRefCount(objPtr); * * This will free the obj if there are no references to the obj. */ # define Tcl_BounceRefCount(objPtr) \ TclBounceRefCount(objPtr, __FILE__, __LINE__) static inline void TclBounceRefCount(Tcl_Obj* objPtr, const char* fn, int line) { if (objPtr) { if ((objPtr)->refCount == 0) { Tcl_DbDecrRefCount(objPtr, fn, line); } } } #else # undef Tcl_IncrRefCount # define Tcl_IncrRefCount(objPtr) \ ((void)++(objPtr)->refCount) /* * Use do/while0 idiom for optimum correctness without compiler warnings. * https://wiki.c2.com/?TrivialDoWhileLoop */ # undef Tcl_DecrRefCount # define Tcl_DecrRefCount(objPtr) \ do { \ Tcl_Obj *_objPtr = (objPtr); \ if (_objPtr->refCount-- <= 1) { \ TclFreeObj(_objPtr); \ } \ } while(0) # undef Tcl_IsShared # define Tcl_IsShared(objPtr) \ ((objPtr)->refCount > 1) /* * Declare that obj will no longer be used or referenced. * This will release the obj if there is no referece count, * otherwise let it be. */ # define Tcl_BounceRefCount(objPtr) \ TclBounceRefCount(objPtr); static inline void TclBounceRefCount(Tcl_Obj* objPtr) { if (objPtr) { if ((objPtr)->refCount == 0) { Tcl_DecrRefCount(objPtr); } } } #endif /* * Macros and definitions that help to debug the use of Tcl objects. When * TCL_MEM_DEBUG is defined, the Tcl_New declarations are overridden to call * debugging versions of the object creation functions. */ #ifdef TCL_MEM_DEBUG # undef Tcl_NewBignumObj # define Tcl_NewBignumObj(val) \ Tcl_DbNewBignumObj(val, __FILE__, __LINE__) # undef Tcl_NewBooleanObj # define Tcl_NewBooleanObj(val) \ Tcl_DbNewWideIntObj((val)!=0, __FILE__, __LINE__) # undef Tcl_NewByteArrayObj # define Tcl_NewByteArrayObj(bytes, len) \ Tcl_DbNewByteArrayObj(bytes, len, __FILE__, __LINE__) # undef Tcl_NewDoubleObj # define Tcl_NewDoubleObj(val) \ Tcl_DbNewDoubleObj(val, __FILE__, __LINE__) # undef Tcl_NewListObj # define Tcl_NewListObj(objc, objv) \ Tcl_DbNewListObj(objc, objv, __FILE__, __LINE__) # undef Tcl_NewObj # define Tcl_NewObj() \ Tcl_DbNewObj(__FILE__, __LINE__) # undef Tcl_NewStringObj # define Tcl_NewStringObj(bytes, len) \ Tcl_DbNewStringObj(bytes, len, __FILE__, __LINE__) # undef Tcl_NewWideIntObj # define Tcl_NewWideIntObj(val) \ Tcl_DbNewWideIntObj(val, __FILE__, __LINE__) #endif /* TCL_MEM_DEBUG */ /* *---------------------------------------------------------------------------- * Macros for clients to use to access fields of hash entries: */ #define Tcl_GetHashValue(h) ((h)->clientData) #define Tcl_SetHashValue(h, value) ((h)->clientData = (void *)(value)) #define Tcl_GetHashKey(tablePtr, h) \ ((void *) (((tablePtr)->keyType == TCL_ONE_WORD_KEYS || \ (tablePtr)->keyType == TCL_CUSTOM_PTR_KEYS) \ ? (h)->key.oneWordValue \ : (h)->key.string)) /* * Macros to use for clients to use to invoke find and create functions for * hash tables: */ #undef Tcl_FindHashEntry #define Tcl_FindHashEntry(tablePtr, key) \ (*((tablePtr)->findProc))(tablePtr, (const char *)(key)) #undef Tcl_CreateHashEntry #define Tcl_CreateHashEntry(tablePtr, key, newPtr) \ (*((tablePtr)->createProc))(tablePtr, (const char *)(key), newPtr) #endif /* RC_INVOKED */ /* * end block for C++ */ #ifdef __cplusplus } #endif #endif /* _TCL */ /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */