/* * tclCompile.c -- * * This file contains procedures that compile Tcl commands or parts of * commands (like quoted strings or nested sub-commands) into a sequence * of instructions ("bytecodes"). * * Copyright © 1996-1998 Sun Microsystems, Inc. * Copyright © 2001 Kevin B. Kenny. All rights reserved. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tclInt.h" #include "tclCompile.h" #include /* * Variable that controls whether compilation tracing is enabled and, if so, * what level of tracing is desired: * 0: no compilation tracing * 1: summarize compilation of top level cmds and proc bodies * 2: display all instructions of each ByteCode compiled * This variable is linked to the Tcl variable "tcl_traceCompile". */ #ifdef TCL_COMPILE_DEBUG int tclTraceCompile = 0; static int traceInitialized = 0; #endif /* * A table describing the Tcl bytecode instructions. Entries in this table * must correspond to the instruction opcode definitions in tclCompile.h. The * names "op1" and "op4" refer to an instruction's one or four byte first * operand. Similarly, "stktop" and "stknext" refer to the topmost and next to * topmost stack elements. * * Note that the load, store, and incr instructions do not distinguish local * from global variables; the bytecode interpreter at runtime uses the * existence of a procedure call frame to distinguish these. */ InstructionDesc const tclInstructionTable[] = { /* Name Bytes stackEffect #Opnds Operand types */ {"done", 1, -1, 0, {OPERAND_NONE}}, /* Finish ByteCode execution and return stktop (top stack item) */ {"push1", 2, +1, 1, {OPERAND_LIT1}}, /* Push object at ByteCode objArray[op1] */ {"push4", 5, +1, 1, {OPERAND_LIT4}}, /* Push object at ByteCode objArray[op4] */ {"pop", 1, -1, 0, {OPERAND_NONE}}, /* Pop the topmost stack object */ {"dup", 1, +1, 0, {OPERAND_NONE}}, /* Duplicate the topmost stack object and push the result */ {"strcat", 2, INT_MIN, 1, {OPERAND_UINT1}}, /* Concatenate the top op1 items and push result */ {"invokeStk1", 2, INT_MIN, 1, {OPERAND_UINT1}}, /* Invoke command named objv[0]; = */ {"invokeStk4", 5, INT_MIN, 1, {OPERAND_UINT4}}, /* Invoke command named objv[0]; = */ {"evalStk", 1, 0, 0, {OPERAND_NONE}}, /* Evaluate command in stktop using Tcl_EvalObj. */ {"exprStk", 1, 0, 0, {OPERAND_NONE}}, /* Execute expression in stktop using Tcl_ExprStringObj. */ {"loadScalar1", 2, 1, 1, {OPERAND_LVT1}}, /* Load scalar variable at index op1 <= 255 in call frame */ {"loadScalar4", 5, 1, 1, {OPERAND_LVT4}}, /* Load scalar variable at index op1 >= 256 in call frame */ {"loadScalarStk", 1, 0, 0, {OPERAND_NONE}}, /* Load scalar variable; scalar's name is stktop */ {"loadArray1", 2, 0, 1, {OPERAND_LVT1}}, /* Load array element; array at slot op1<=255, element is stktop */ {"loadArray4", 5, 0, 1, {OPERAND_LVT4}}, /* Load array element; array at slot op1 > 255, element is stktop */ {"loadArrayStk", 1, -1, 0, {OPERAND_NONE}}, /* Load array element; element is stktop, array name is stknext */ {"loadStk", 1, 0, 0, {OPERAND_NONE}}, /* Load general variable; unparsed variable name is stktop */ {"storeScalar1", 2, 0, 1, {OPERAND_LVT1}}, /* Store scalar variable at op1<=255 in frame; value is stktop */ {"storeScalar4", 5, 0, 1, {OPERAND_LVT4}}, /* Store scalar variable at op1 > 255 in frame; value is stktop */ {"storeScalarStk", 1, -1, 0, {OPERAND_NONE}}, /* Store scalar; value is stktop, scalar name is stknext */ {"storeArray1", 2, -1, 1, {OPERAND_LVT1}}, /* Store array element; array at op1<=255, value is top then elem */ {"storeArray4", 5, -1, 1, {OPERAND_LVT4}}, /* Store array element; array at op1>=256, value is top then elem */ {"storeArrayStk", 1, -2, 0, {OPERAND_NONE}}, /* Store array element; value is stktop, then elem, array names */ {"storeStk", 1, -1, 0, {OPERAND_NONE}}, /* Store general variable; value is stktop, then unparsed name */ {"incrScalar1", 2, 0, 1, {OPERAND_LVT1}}, /* Incr scalar at index op1<=255 in frame; incr amount is stktop */ {"incrScalarStk", 1, -1, 0, {OPERAND_NONE}}, /* Incr scalar; incr amount is stktop, scalar's name is stknext */ {"incrArray1", 2, -1, 1, {OPERAND_LVT1}}, /* Incr array elem; arr at slot op1<=255, amount is top then elem */ {"incrArrayStk", 1, -2, 0, {OPERAND_NONE}}, /* Incr array element; amount is top then elem then array names */ {"incrStk", 1, -1, 0, {OPERAND_NONE}}, /* Incr general variable; amount is stktop then unparsed var name */ {"incrScalar1Imm", 3, +1, 2, {OPERAND_LVT1, OPERAND_INT1}}, /* Incr scalar at slot op1 <= 255; amount is 2nd operand byte */ {"incrScalarStkImm", 2, 0, 1, {OPERAND_INT1}}, /* Incr scalar; scalar name is stktop; incr amount is op1 */ {"incrArray1Imm", 3, 0, 2, {OPERAND_LVT1, OPERAND_INT1}}, /* Incr array elem; array at slot op1 <= 255, elem is stktop, * amount is 2nd operand byte */ {"incrArrayStkImm", 2, -1, 1, {OPERAND_INT1}}, /* Incr array element; elem is top then array name, amount is op1 */ {"incrStkImm", 2, 0, 1, {OPERAND_INT1}}, /* Incr general variable; unparsed name is top, amount is op1 */ {"jump1", 2, 0, 1, {OPERAND_OFFSET1}}, /* Jump relative to (pc + op1) */ {"jump4", 5, 0, 1, {OPERAND_OFFSET4}}, /* Jump relative to (pc + op4) */ {"jumpTrue1", 2, -1, 1, {OPERAND_OFFSET1}}, /* Jump relative to (pc + op1) if stktop expr object is true */ {"jumpTrue4", 5, -1, 1, {OPERAND_OFFSET4}}, /* Jump relative to (pc + op4) if stktop expr object is true */ {"jumpFalse1", 2, -1, 1, {OPERAND_OFFSET1}}, /* Jump relative to (pc + op1) if stktop expr object is false */ {"jumpFalse4", 5, -1, 1, {OPERAND_OFFSET4}}, /* Jump relative to (pc + op4) if stktop expr object is false */ {"bitor", 1, -1, 0, {OPERAND_NONE}}, /* Bitwise or: push (stknext | stktop) */ {"bitxor", 1, -1, 0, {OPERAND_NONE}}, /* Bitwise xor push (stknext ^ stktop) */ {"bitand", 1, -1, 0, {OPERAND_NONE}}, /* Bitwise and: push (stknext & stktop) */ {"eq", 1, -1, 0, {OPERAND_NONE}}, /* Equal: push (stknext == stktop) */ {"neq", 1, -1, 0, {OPERAND_NONE}}, /* Not equal: push (stknext != stktop) */ {"lt", 1, -1, 0, {OPERAND_NONE}}, /* Less: push (stknext < stktop) */ {"gt", 1, -1, 0, {OPERAND_NONE}}, /* Greater: push (stknext > stktop) */ {"le", 1, -1, 0, {OPERAND_NONE}}, /* Less or equal: push (stknext <= stktop) */ {"ge", 1, -1, 0, {OPERAND_NONE}}, /* Greater or equal: push (stknext >= stktop) */ {"lshift", 1, -1, 0, {OPERAND_NONE}}, /* Left shift: push (stknext << stktop) */ {"rshift", 1, -1, 0, {OPERAND_NONE}}, /* Right shift: push (stknext >> stktop) */ {"add", 1, -1, 0, {OPERAND_NONE}}, /* Add: push (stknext + stktop) */ {"sub", 1, -1, 0, {OPERAND_NONE}}, /* Sub: push (stkext - stktop) */ {"mult", 1, -1, 0, {OPERAND_NONE}}, /* Multiply: push (stknext * stktop) */ {"div", 1, -1, 0, {OPERAND_NONE}}, /* Divide: push (stknext / stktop) */ {"mod", 1, -1, 0, {OPERAND_NONE}}, /* Mod: push (stknext % stktop) */ {"uplus", 1, 0, 0, {OPERAND_NONE}}, /* Unary plus: push +stktop */ {"uminus", 1, 0, 0, {OPERAND_NONE}}, /* Unary minus: push -stktop */ {"bitnot", 1, 0, 0, {OPERAND_NONE}}, /* Bitwise not: push ~stktop */ {"not", 1, 0, 0, {OPERAND_NONE}}, /* Logical not: push !stktop */ {"tryCvtToNumeric", 1, 0, 0, {OPERAND_NONE}}, /* Try converting stktop to first int then double if possible. */ {"break", 1, 0, 0, {OPERAND_NONE}}, /* Abort closest enclosing loop; if none, return TCL_BREAK code. */ {"continue", 1, 0, 0, {OPERAND_NONE}}, /* Skip to next iteration of closest enclosing loop; if none, return * TCL_CONTINUE code. */ {"beginCatch4", 5, 0, 1, {OPERAND_UINT4}}, /* Record start of catch with the operand's exception index. Push the * current stack depth onto a special catch stack. */ {"endCatch", 1, 0, 0, {OPERAND_NONE}}, /* End of last catch. Pop the bytecode interpreter's catch stack. */ {"pushResult", 1, +1, 0, {OPERAND_NONE}}, /* Push the interpreter's object result onto the stack. */ {"pushReturnCode", 1, +1, 0, {OPERAND_NONE}}, /* Push interpreter's return code (e.g. TCL_OK or TCL_ERROR) as a new * object onto the stack. */ {"streq", 1, -1, 0, {OPERAND_NONE}}, /* Str Equal: push (stknext eq stktop) */ {"strneq", 1, -1, 0, {OPERAND_NONE}}, /* Str !Equal: push (stknext neq stktop) */ {"strcmp", 1, -1, 0, {OPERAND_NONE}}, /* Str Compare: push (stknext cmp stktop) */ {"strlen", 1, 0, 0, {OPERAND_NONE}}, /* Str Length: push (strlen stktop) */ {"strindex", 1, -1, 0, {OPERAND_NONE}}, /* Str Index: push (strindex stknext stktop) */ {"strmatch", 2, -1, 1, {OPERAND_INT1}}, /* Str Match: push (strmatch stknext stktop) opnd == nocase */ {"list", 5, INT_MIN, 1, {OPERAND_UINT4}}, /* List: push (stk1 stk2 ... stktop) */ {"listIndex", 1, -1, 0, {OPERAND_NONE}}, /* List Index: push (listindex stknext stktop) */ {"listLength", 1, 0, 0, {OPERAND_NONE}}, /* List Len: push (listlength stktop) */ {"appendScalar1", 2, 0, 1, {OPERAND_LVT1}}, /* Append scalar variable at op1<=255 in frame; value is stktop */ {"appendScalar4", 5, 0, 1, {OPERAND_LVT4}}, /* Append scalar variable at op1 > 255 in frame; value is stktop */ {"appendArray1", 2, -1, 1, {OPERAND_LVT1}}, /* Append array element; array at op1<=255, value is top then elem */ {"appendArray4", 5, -1, 1, {OPERAND_LVT4}}, /* Append array element; array at op1>=256, value is top then elem */ {"appendArrayStk", 1, -2, 0, {OPERAND_NONE}}, /* Append array element; value is stktop, then elem, array names */ {"appendStk", 1, -1, 0, {OPERAND_NONE}}, /* Append general variable; value is stktop, then unparsed name */ {"lappendScalar1", 2, 0, 1, {OPERAND_LVT1}}, /* Lappend scalar variable at op1<=255 in frame; value is stktop */ {"lappendScalar4", 5, 0, 1, {OPERAND_LVT4}}, /* Lappend scalar variable at op1 > 255 in frame; value is stktop */ {"lappendArray1", 2, -1, 1, {OPERAND_LVT1}}, /* Lappend array element; array at op1<=255, value is top then elem */ {"lappendArray4", 5, -1, 1, {OPERAND_LVT4}}, /* Lappend array element; array at op1>=256, value is top then elem */ {"lappendArrayStk", 1, -2, 0, {OPERAND_NONE}}, /* Lappend array element; value is stktop, then elem, array names */ {"lappendStk", 1, -1, 0, {OPERAND_NONE}}, /* Lappend general variable; value is stktop, then unparsed name */ {"lindexMulti", 5, INT_MIN, 1, {OPERAND_UINT4}}, /* Lindex with generalized args, operand is number of stacked objs * used: (operand-1) entries from stktop are the indices; then list to * process. */ {"over", 5, +1, 1, {OPERAND_UINT4}}, /* Duplicate the arg-th element from top of stack (TOS=0) */ {"lsetList", 1, -2, 0, {OPERAND_NONE}}, /* Four-arg version of 'lset'. stktop is old value; next is new * element value, next is the index list; pushes new value */ {"lsetFlat", 5, INT_MIN, 1, {OPERAND_UINT4}}, /* Three- or >=5-arg version of 'lset', operand is number of stacked * objs: stktop is old value, next is new element value, next come * (operand-2) indices; pushes the new value. */ {"returnImm", 9, -1, 2, {OPERAND_INT4, OPERAND_UINT4}}, /* Compiled [return], code, level are operands; options and result * are on the stack. */ {"expon", 1, -1, 0, {OPERAND_NONE}}, /* Binary exponentiation operator: push (stknext ** stktop) */ /* * NOTE: the stack effects of expandStkTop and invokeExpanded are wrong - * but it cannot be done right at compile time, the stack effect is only * known at run time. The value for invokeExpanded is estimated better at * compile time. * See the comments further down in this file, where INST_INVOKE_EXPANDED * is emitted. */ {"expandStart", 1, 0, 0, {OPERAND_NONE}}, /* Start of command with {*} (expanded) arguments */ {"expandStkTop", 5, 0, 1, {OPERAND_UINT4}}, /* Expand the list at stacktop: push its elements on the stack */ {"invokeExpanded", 1, 0, 0, {OPERAND_NONE}}, /* Invoke the command marked by the last 'expandStart' */ {"listIndexImm", 5, 0, 1, {OPERAND_IDX4}}, /* List Index: push (lindex stktop op4) */ {"listRangeImm", 9, 0, 2, {OPERAND_IDX4, OPERAND_IDX4}}, /* List Range: push (lrange stktop op4 op4) */ {"startCommand", 9, 0, 2, {OPERAND_OFFSET4, OPERAND_UINT4}}, /* Start of bytecoded command: op is the length of the cmd's code, op2 * is number of commands here */ {"listIn", 1, -1, 0, {OPERAND_NONE}}, /* List containment: push [lsearch stktop stknext]>=0) */ {"listNotIn", 1, -1, 0, {OPERAND_NONE}}, /* List negated containment: push [lsearch stktop stknext]<0) */ {"pushReturnOpts", 1, +1, 0, {OPERAND_NONE}}, /* Push the interpreter's return option dictionary as an object on the * stack. */ {"returnStk", 1, -1, 0, {OPERAND_NONE}}, /* Compiled [return]; options and result are on the stack, code and * level are in the options. */ {"dictGet", 5, INT_MIN, 1, {OPERAND_UINT4}}, /* The top op4 words (min 1) are a key path into the dictionary just * below the keys on the stack, and all those values are replaced by * the value read out of that key-path (like [dict get]). * Stack: ... dict key1 ... keyN => ... value */ {"dictSet", 9, INT_MIN, 2, {OPERAND_UINT4, OPERAND_LVT4}}, /* Update a dictionary value such that the keys are a path pointing to * the value. op4#1 = numKeys, op4#2 = LVTindex * Stack: ... key1 ... keyN value => ... newDict */ {"dictUnset", 9, INT_MIN, 2, {OPERAND_UINT4, OPERAND_LVT4}}, /* Update a dictionary value such that the keys are not a path pointing * to any value. op4#1 = numKeys, op4#2 = LVTindex * Stack: ... key1 ... keyN => ... newDict */ {"dictIncrImm", 9, 0, 2, {OPERAND_INT4, OPERAND_LVT4}}, /* Update a dictionary value such that the value pointed to by key is * incremented by some value (or set to it if the key isn't in the * dictionary at all). op4#1 = incrAmount, op4#2 = LVTindex * Stack: ... key => ... newDict */ {"dictAppend", 5, -1, 1, {OPERAND_LVT4}}, /* Update a dictionary value such that the value pointed to by key has * some value string-concatenated onto it. op4 = LVTindex * Stack: ... key valueToAppend => ... newDict */ {"dictLappend", 5, -1, 1, {OPERAND_LVT4}}, /* Update a dictionary value such that the value pointed to by key has * some value list-appended onto it. op4 = LVTindex * Stack: ... key valueToAppend => ... newDict */ {"dictFirst", 5, +2, 1, {OPERAND_LVT4}}, /* Begin iterating over the dictionary, using the local scalar * indicated by op4 to hold the iterator state. The local scalar * should not refer to a named variable as the value is not wholly * managed correctly. * Stack: ... dict => ... value key doneBool */ {"dictNext", 5, +3, 1, {OPERAND_LVT4}}, /* Get the next iteration from the iterator in op4's local scalar. * Stack: ... => ... value key doneBool */ {"dictUpdateStart", 9, 0, 2, {OPERAND_LVT4, OPERAND_AUX4}}, /* Create the variables (described in the aux data referred to by the * second immediate argument) to mirror the state of the dictionary in * the variable referred to by the first immediate argument. The list * of keys (top of the stack, not popped) must be the same length as * the list of variables. * Stack: ... keyList => ... keyList */ {"dictUpdateEnd", 9, -1, 2, {OPERAND_LVT4, OPERAND_AUX4}}, /* Reflect the state of local variables (described in the aux data * referred to by the second immediate argument) back to the state of * the dictionary in the variable referred to by the first immediate * argument. The list of keys (popped from the stack) must be the same * length as the list of variables. * Stack: ... keyList => ... */ {"jumpTable", 5, -1, 1, {OPERAND_AUX4}}, /* Jump according to the jump-table (in AuxData as indicated by the * operand) and the argument popped from the list. Always executes the * next instruction if no match against the table's entries was found. * Stack: ... value => ... * Note that the jump table contains offsets relative to the PC when * it points to this instruction; the code is relocatable. */ {"upvar", 5, -1, 1, {OPERAND_LVT4}}, /* finds level and otherName in stack, links to local variable at * index op1. Leaves the level on stack. */ {"nsupvar", 5, -1, 1, {OPERAND_LVT4}}, /* finds namespace and otherName in stack, links to local variable at * index op1. Leaves the namespace on stack. */ {"variable", 5, -1, 1, {OPERAND_LVT4}}, /* finds namespace and otherName in stack, links to local variable at * index op1. Leaves the namespace on stack. */ {"syntax", 9, -1, 2, {OPERAND_INT4, OPERAND_UINT4}}, /* Compiled bytecodes to signal syntax error. Equivalent to returnImm * except for the ERR_ALREADY_LOGGED flag in the interpreter. */ {"reverse", 5, 0, 1, {OPERAND_UINT4}}, /* Reverse the order of the arg elements at the top of stack */ {"regexp", 2, -1, 1, {OPERAND_INT1}}, /* Regexp: push (regexp stknext stktop) opnd == nocase */ {"existScalar", 5, 1, 1, {OPERAND_LVT4}}, /* Test if scalar variable at index op1 in call frame exists */ {"existArray", 5, 0, 1, {OPERAND_LVT4}}, /* Test if array element exists; array at slot op1, element is * stktop */ {"existArrayStk", 1, -1, 0, {OPERAND_NONE}}, /* Test if array element exists; element is stktop, array name is * stknext */ {"existStk", 1, 0, 0, {OPERAND_NONE}}, /* Test if general variable exists; unparsed variable name is stktop*/ {"nop", 1, 0, 0, {OPERAND_NONE}}, /* Do nothing */ {"returnCodeBranch", 1, -1, 0, {OPERAND_NONE}}, /* Jump to next instruction based on the return code on top of stack * ERROR: +1; RETURN: +3; BREAK: +5; CONTINUE: +7; * Other non-OK: +9 */ {"unsetScalar", 6, 0, 2, {OPERAND_UINT1, OPERAND_LVT4}}, /* Make scalar variable at index op2 in call frame cease to exist; * op1 is 1 for errors on problems, 0 otherwise */ {"unsetArray", 6, -1, 2, {OPERAND_UINT1, OPERAND_LVT4}}, /* Make array element cease to exist; array at slot op2, element is * stktop; op1 is 1 for errors on problems, 0 otherwise */ {"unsetArrayStk", 2, -2, 1, {OPERAND_UINT1}}, /* Make array element cease to exist; element is stktop, array name is * stknext; op1 is 1 for errors on problems, 0 otherwise */ {"unsetStk", 2, -1, 1, {OPERAND_UINT1}}, /* Make general variable cease to exist; unparsed variable name is * stktop; op1 is 1 for errors on problems, 0 otherwise */ {"dictExpand", 1, -1, 0, {OPERAND_NONE}}, /* Probe into a dict and extract it (or a subdict of it) into * variables with matched names. Produces list of keys bound as * result. Part of [dict with]. * Stack: ... dict path => ... keyList */ {"dictRecombineStk", 1, -3, 0, {OPERAND_NONE}}, /* Map variable contents back into a dictionary in a variable. Part of * [dict with]. * Stack: ... dictVarName path keyList => ... */ {"dictRecombineImm", 5, -2, 1, {OPERAND_LVT4}}, /* Map variable contents back into a dictionary in the local variable * indicated by the LVT index. Part of [dict with]. * Stack: ... path keyList => ... */ {"dictExists", 5, INT_MIN, 1, {OPERAND_UINT4}}, /* The top op4 words (min 1) are a key path into the dictionary just * below the keys on the stack, and all those values are replaced by a * boolean indicating whether it is possible to read out a value from * that key-path (like [dict exists]). * Stack: ... dict key1 ... keyN => ... boolean */ {"verifyDict", 1, -1, 0, {OPERAND_NONE}}, /* Verifies that the word on the top of the stack is a dictionary, * popping it if it is and throwing an error if it is not. * Stack: ... value => ... */ {"strmap", 1, -2, 0, {OPERAND_NONE}}, /* Simplified version of [string map] that only applies one change * string, and only case-sensitively. * Stack: ... from to string => ... changedString */ {"strfind", 1, -1, 0, {OPERAND_NONE}}, /* Find the first index of a needle string in a haystack string, * producing the index (integer) or -1 if nothing found. * Stack: ... needle haystack => ... index */ {"strrfind", 1, -1, 0, {OPERAND_NONE}}, /* Find the last index of a needle string in a haystack string, * producing the index (integer) or -1 if nothing found. * Stack: ... needle haystack => ... index */ {"strrangeImm", 9, 0, 2, {OPERAND_IDX4, OPERAND_IDX4}}, /* String Range: push (string range stktop op4 op4) */ {"strrange", 1, -2, 0, {OPERAND_NONE}}, /* String Range with non-constant arguments. * Stack: ... string idxA idxB => ... substring */ {"yield", 1, 0, 0, {OPERAND_NONE}}, /* Makes the current coroutine yield the value at the top of the * stack, and places the response back on top of the stack when it * resumes. * Stack: ... valueToYield => ... resumeValue */ {"coroName", 1, +1, 0, {OPERAND_NONE}}, /* Push the name of the interpreter's current coroutine as an object * on the stack. */ {"tailcall", 2, INT_MIN, 1, {OPERAND_UINT1}}, /* Do a tailcall with the opnd items on the stack as the thing to * tailcall to; opnd must be greater than 0 for the semantics to work * right. */ {"currentNamespace", 1, +1, 0, {OPERAND_NONE}}, /* Push the name of the interpreter's current namespace as an object * on the stack. */ {"infoLevelNumber", 1, +1, 0, {OPERAND_NONE}}, /* Push the stack depth (i.e., [info level]) of the interpreter as an * object on the stack. */ {"infoLevelArgs", 1, 0, 0, {OPERAND_NONE}}, /* Push the argument words to a stack depth (i.e., [info level ]) * of the interpreter as an object on the stack. * Stack: ... depth => ... argList */ {"resolveCmd", 1, 0, 0, {OPERAND_NONE}}, /* Resolves the command named on the top of the stack to its fully * qualified version, or produces the empty string if no such command * exists. Never generates errors. * Stack: ... cmdName => ... fullCmdName */ {"tclooSelf", 1, +1, 0, {OPERAND_NONE}}, /* Push the identity of the current TclOO object (i.e., the name of * its current public access command) on the stack. */ {"tclooClass", 1, 0, 0, {OPERAND_NONE}}, /* Push the class of the TclOO object named at the top of the stack * onto the stack. * Stack: ... object => ... class */ {"tclooNamespace", 1, 0, 0, {OPERAND_NONE}}, /* Push the namespace of the TclOO object named at the top of the * stack onto the stack. * Stack: ... object => ... namespace */ {"tclooIsObject", 1, 0, 0, {OPERAND_NONE}}, /* Push whether the value named at the top of the stack is a TclOO * object (i.e., a boolean). Can corrupt the interpreter result * despite not throwing, so not safe for use in a post-exception * context. * Stack: ... value => ... boolean */ {"arrayExistsStk", 1, 0, 0, {OPERAND_NONE}}, /* Looks up the element on the top of the stack and tests whether it * is an array. Pushes a boolean describing whether this is the * case. Also runs the whole-array trace on the named variable, so can * throw anything. * Stack: ... varName => ... boolean */ {"arrayExistsImm", 5, +1, 1, {OPERAND_LVT4}}, /* Looks up the variable indexed by opnd and tests whether it is an * array. Pushes a boolean describing whether this is the case. Also * runs the whole-array trace on the named variable, so can throw * anything. * Stack: ... => ... boolean */ {"arrayMakeStk", 1, -1, 0, {OPERAND_NONE}}, /* Forces the element on the top of the stack to be the name of an * array. * Stack: ... varName => ... */ {"arrayMakeImm", 5, 0, 1, {OPERAND_LVT4}}, /* Forces the variable indexed by opnd to be an array. Does not touch * the stack. */ {"invokeReplace", 6, INT_MIN, 2, {OPERAND_UINT4,OPERAND_UINT1}}, /* Invoke command named objv[0], replacing the first two words with * the word at the top of the stack; * = */ {"listConcat", 1, -1, 0, {OPERAND_NONE}}, /* Concatenates the two lists at the top of the stack into a single * list and pushes that resulting list onto the stack. * Stack: ... list1 list2 => ... [lconcat list1 list2] */ {"expandDrop", 1, 0, 0, {OPERAND_NONE}}, /* Drops an element from the auxiliary stack, popping stack elements * until the matching stack depth is reached. */ /* New foreach implementation */ {"foreach_start", 5, +2, 1, {OPERAND_AUX4}}, /* Initialize execution of a foreach loop. Operand is aux data index * of the ForeachInfo structure for the foreach command. It pushes 2 * elements which hold runtime params for foreach_step, they are later * dropped by foreach_end together with the value lists. NOTE that the * iterator-tracker and info reference must not be passed to bytecodes * that handle normal Tcl values. NOTE that this instruction jumps to * the foreach_step instruction paired with it; the stack info below * is only nominal. * Stack: ... listObjs... => ... listObjs... iterTracker info */ {"foreach_step", 1, 0, 0, {OPERAND_NONE}}, /* "Step" or begin next iteration of foreach loop. Assigns to foreach * iteration variables. May jump to straight after the foreach_start * that pushed the iterTracker and info values. MUST be followed * immediately by a foreach_end. * Stack: ... listObjs... iterTracker info => * ... listObjs... iterTracker info */ {"foreach_end", 1, 0, 0, {OPERAND_NONE}}, /* Clean up a foreach loop by dropping the info value, the tracker * value and the lists that were being iterated over. * Stack: ... listObjs... iterTracker info => ... */ {"lmap_collect", 1, -1, 0, {OPERAND_NONE}}, /* Appends the value at the top of the stack to the list located on * the stack the "other side" of the foreach-related values. * Stack: ... collector listObjs... iterTracker info value => * ... collector listObjs... iterTracker info */ {"strtrim", 1, -1, 0, {OPERAND_NONE}}, /* [string trim] core: removes the characters (designated by the value * at the top of the stack) from both ends of the string and pushes * the resulting string. * Stack: ... string charset => ... trimmedString */ {"strtrimLeft", 1, -1, 0, {OPERAND_NONE}}, /* [string trimleft] core: removes the characters (designated by the * value at the top of the stack) from the left of the string and * pushes the resulting string. * Stack: ... string charset => ... trimmedString */ {"strtrimRight", 1, -1, 0, {OPERAND_NONE}}, /* [string trimright] core: removes the characters (designated by the * value at the top of the stack) from the right of the string and * pushes the resulting string. * Stack: ... string charset => ... trimmedString */ {"concatStk", 5, INT_MIN, 1, {OPERAND_UINT4}}, /* Wrapper round Tcl_ConcatObj(), used for [concat] and [eval]. opnd * is number of values to concatenate. * Operation: push concat(stk1 stk2 ... stktop) */ {"strcaseUpper", 1, 0, 0, {OPERAND_NONE}}, /* [string toupper] core: converts whole string to upper case using * the default (extended "C" locale) rules. * Stack: ... string => ... newString */ {"strcaseLower", 1, 0, 0, {OPERAND_NONE}}, /* [string tolower] core: converts whole string to upper case using * the default (extended "C" locale) rules. * Stack: ... string => ... newString */ {"strcaseTitle", 1, 0, 0, {OPERAND_NONE}}, /* [string totitle] core: converts whole string to upper case using * the default (extended "C" locale) rules. * Stack: ... string => ... newString */ {"strreplace", 1, -3, 0, {OPERAND_NONE}}, /* [string replace] core: replaces a non-empty range of one string * with the contents of another. * Stack: ... string fromIdx toIdx replacement => ... newString */ {"originCmd", 1, 0, 0, {OPERAND_NONE}}, /* Reports which command was the origin (via namespace import chain) * of the command named on the top of the stack. * Stack: ... cmdName => ... fullOriginalCmdName */ {"tclooNext", 2, INT_MIN, 1, {OPERAND_UINT1}}, /* Call the next item on the TclOO call chain, passing opnd arguments * (min 1, max 255, *includes* "next"). The result of the invoked * method implementation will be pushed on the stack in place of the * arguments (similar to invokeStk). * Stack: ... "next" arg2 arg3 -- argN => ... result */ {"tclooNextClass", 2, INT_MIN, 1, {OPERAND_UINT1}}, /* Call the following item on the TclOO call chain defined by class * className, passing opnd arguments (min 2, max 255, *includes* * "nextto" and the class name). The result of the invoked method * implementation will be pushed on the stack in place of the * arguments (similar to invokeStk). * Stack: ... "nextto" className arg3 arg4 -- argN => ... result */ {"yieldToInvoke", 1, 0, 0, {OPERAND_NONE}}, /* Makes the current coroutine yield the value at the top of the * stack, invoking the given command/args with resolution in the given * namespace (all packed into a list), and places the list of values * that are the response back on top of the stack when it resumes. * Stack: ... [list ns cmd arg1 ... argN] => ... resumeList */ {"numericType", 1, 0, 0, {OPERAND_NONE}}, /* Pushes the numeric type code of the word at the top of the stack. * Stack: ... value => ... typeCode */ {"tryCvtToBoolean", 1, +1, 0, {OPERAND_NONE}}, /* Try converting stktop to boolean if possible. No errors. * Stack: ... value => ... value isStrictBool */ {"strclass", 2, 0, 1, {OPERAND_SCLS1}}, /* See if all the characters of the given string are a member of the * specified (by opnd) character class. Note that an empty string will * satisfy the class check (standard definition of "all"). * Stack: ... stringValue => ... boolean */ {"lappendList", 5, 0, 1, {OPERAND_LVT4}}, /* Lappend list to scalar variable at op4 in frame. * Stack: ... list => ... listVarContents */ {"lappendListArray", 5, -1, 1, {OPERAND_LVT4}}, /* Lappend list to array element; array at op4. * Stack: ... elem list => ... listVarContents */ {"lappendListArrayStk", 1, -2, 0, {OPERAND_NONE}}, /* Lappend list to array element. * Stack: ... arrayName elem list => ... listVarContents */ {"lappendListStk", 1, -1, 0, {OPERAND_NONE}}, /* Lappend list to general variable. * Stack: ... varName list => ... listVarContents */ {"clockRead", 2, +1, 1, {OPERAND_UINT1}}, /* Read clock out to the stack. Operand is which clock to read * 0=clicks, 1=microseconds, 2=milliseconds, 3=seconds. * Stack: ... => ... time */ {"dictGetDef", 5, INT_MIN, 1, {OPERAND_UINT4}}, /* The top word is the default, the next op4 words (min 1) are a key * path into the dictionary just below the keys on the stack, and all * those values are replaced by the value read out of that key-path * (like [dict get]) except if there is no such key, when instead the * default is pushed instead. * Stack: ... dict key1 ... keyN default => ... value */ {"strlt", 1, -1, 0, {OPERAND_NONE}}, /* String Less: push (stknext < stktop) */ {"strgt", 1, -1, 0, {OPERAND_NONE}}, /* String Greater: push (stknext > stktop) */ {"strle", 1, -1, 0, {OPERAND_NONE}}, /* String Less or equal: push (stknext <= stktop) */ {"strge", 1, -1, 0, {OPERAND_NONE}}, /* String Greater or equal: push (stknext >= stktop) */ {NULL, 0, 0, 0, {OPERAND_NONE}} }; /* * Prototypes for procedures defined later in this file: */ static void CleanupByteCode(ByteCode *codePtr); static ByteCode * CompileSubstObj(Tcl_Interp *interp, Tcl_Obj *objPtr, int flags); static void DupByteCodeInternalRep(Tcl_Obj *srcPtr, Tcl_Obj *copyPtr); static unsigned char * EncodeCmdLocMap(CompileEnv *envPtr, ByteCode *codePtr, unsigned char *startPtr); static void EnterCmdExtentData(CompileEnv *envPtr, int cmdNumber, int numSrcBytes, int numCodeBytes); static void EnterCmdStartData(CompileEnv *envPtr, int cmdNumber, int srcOffset, int codeOffset); static void FreeByteCodeInternalRep(Tcl_Obj *objPtr); static void FreeSubstCodeInternalRep(Tcl_Obj *objPtr); static int GetCmdLocEncodingSize(CompileEnv *envPtr); static int IsCompactibleCompileEnv(CompileEnv *envPtr); static void PreventCycle(Tcl_Obj *objPtr, CompileEnv *envPtr); #ifdef TCL_COMPILE_STATS static void RecordByteCodeStats(ByteCode *codePtr); #endif /* TCL_COMPILE_STATS */ static int SetByteCodeFromAny(Tcl_Interp *interp, Tcl_Obj *objPtr); static void StartExpanding(CompileEnv *envPtr); /* * TIP #280: Helper for building the per-word line information of all compiled * commands. */ static void EnterCmdWordData(ExtCmdLoc *eclPtr, int srcOffset, Tcl_Token *tokenPtr, const char *cmd, int numWords, int line, int *clNext, int **lines, CompileEnv *envPtr); static void ReleaseCmdWordData(ExtCmdLoc *eclPtr); /* * The structure below defines the bytecode Tcl object type by means of * procedures that can be invoked by generic object code. */ const Tcl_ObjType tclByteCodeType = { "bytecode", /* name */ FreeByteCodeInternalRep, /* freeIntRepProc */ DupByteCodeInternalRep, /* dupIntRepProc */ NULL, /* updateStringProc */ SetByteCodeFromAny /* setFromAnyProc */ }; /* * The structure below defines a bytecode Tcl object type to hold the * compiled bytecode for the [subst]itution of Tcl values. */ static const Tcl_ObjType substCodeType = { "substcode", /* name */ FreeSubstCodeInternalRep, /* freeIntRepProc */ DupByteCodeInternalRep, /* dupIntRepProc - shared with bytecode */ NULL, /* updateStringProc */ NULL, /* setFromAnyProc */ }; #define SubstFlags(objPtr) (objPtr)->internalRep.twoPtrValue.ptr2 /* * Helper macros. */ #define TclIncrUInt4AtPtr(ptr, delta) \ TclStoreInt4AtPtr(TclGetUInt4AtPtr(ptr)+(delta), (ptr)) /* *---------------------------------------------------------------------- * * TclSetByteCodeFromAny -- * * Part of the bytecode Tcl object type implementation. Attempts to * generate an byte code internal form for the Tcl object "objPtr" by * compiling its string representation. This function also takes a hook * procedure that will be invoked to perform any needed post processing * on the compilation results before generating byte codes. interp is * compilation context and may not be NULL. * * Results: * The return value is a standard Tcl object result. If an error occurs * during compilation, an error message is left in the interpreter's * result. * * Side effects: * Frees the old internal representation. If no error occurs, then the * compiled code is stored as "objPtr"s bytecode representation. Also, if * debugging, initializes the "tcl_traceCompile" Tcl variable used to * trace compilations. * *---------------------------------------------------------------------- */ int TclSetByteCodeFromAny( Tcl_Interp *interp, /* The interpreter for which the code is being * compiled. Must not be NULL. */ Tcl_Obj *objPtr, /* The object to make a ByteCode object. */ CompileHookProc *hookProc, /* Procedure to invoke after compilation. */ ClientData clientData) /* Hook procedure private data. */ { Interp *iPtr = (Interp *) interp; CompileEnv compEnv; /* Compilation environment structure allocated * in frame. */ size_t length; int result = TCL_OK; const char *stringPtr; Proc *procPtr = iPtr->compiledProcPtr; ContLineLoc *clLocPtr; #ifdef TCL_COMPILE_DEBUG if (!traceInitialized) { if (Tcl_LinkVar(interp, "tcl_traceCompile", &tclTraceCompile, TCL_LINK_INT) != TCL_OK) { Tcl_Panic("SetByteCodeFromAny: unable to create link for tcl_traceCompile variable"); } traceInitialized = 1; } #endif stringPtr = TclGetStringFromObj(objPtr, &length); /* * TIP #280: Pick up the CmdFrame in which the BC compiler was invoked and * use to initialize the tracking in the compiler. This information was * stored by TclCompEvalObj and ProcCompileProc. */ TclInitCompileEnv(interp, &compEnv, stringPtr, length, iPtr->invokeCmdFramePtr, iPtr->invokeWord); /* * Now we check if we have data about invisible continuation lines for the * script, and make it available to the compile environment, if so. * * It is not clear if the script Tcl_Obj* can be free'd while the compiler * is using it, leading to the release of the associated ContLineLoc * structure as well. To ensure that the latter doesn't happen we set a * lock on it. We release this lock in the function TclFreeCompileEnv(), * found in this file. The "lineCLPtr" hashtable is managed in the file * "tclObj.c". */ clLocPtr = TclContinuationsGet(objPtr); if (clLocPtr) { compEnv.clNext = &clLocPtr->loc[0]; } TclCompileScript(interp, stringPtr, length, &compEnv); /* * Successful compilation. Add a "done" instruction at the end. */ TclEmitOpcode(INST_DONE, &compEnv); /* * Check for optimizations! * * Test if the generated code is free of most hazards; if so, recompile * but with generation of INST_START_CMD disabled. This produces somewhat * faster code in some cases, and more compact code in more. */ if (Tcl_GetParent(interp) == NULL && !Tcl_LimitTypeEnabled(interp, TCL_LIMIT_COMMANDS|TCL_LIMIT_TIME) && IsCompactibleCompileEnv(&compEnv)) { TclFreeCompileEnv(&compEnv); iPtr->compiledProcPtr = procPtr; TclInitCompileEnv(interp, &compEnv, stringPtr, length, iPtr->invokeCmdFramePtr, iPtr->invokeWord); if (clLocPtr) { compEnv.clNext = &clLocPtr->loc[0]; } compEnv.atCmdStart = 2; /* The disabling magic. */ TclCompileScript(interp, stringPtr, length, &compEnv); assert (compEnv.atCmdStart > 1); TclEmitOpcode(INST_DONE, &compEnv); assert (compEnv.atCmdStart > 1); } /* * Apply some peephole optimizations that can cross specific/generic * instruction generator boundaries. */ if (iPtr->optimizer) { (iPtr->optimizer)(&compEnv); } /* * Invoke the compilation hook procedure if one exists. */ if (hookProc) { result = hookProc(interp, &compEnv, clientData); } /* * Change the object into a ByteCode object. Ownership of the literal * objects and aux data items is given to the ByteCode object. */ #ifdef TCL_COMPILE_DEBUG TclVerifyLocalLiteralTable(&compEnv); #endif /*TCL_COMPILE_DEBUG*/ if (result == TCL_OK) { (void) TclInitByteCodeObj(objPtr, &tclByteCodeType, &compEnv); #ifdef TCL_COMPILE_DEBUG if (tclTraceCompile >= 2) { TclPrintByteCodeObj(interp, objPtr); fflush(stdout); } #endif /* TCL_COMPILE_DEBUG */ } TclFreeCompileEnv(&compEnv); return result; } /* *----------------------------------------------------------------------- * * SetByteCodeFromAny -- * * Part of the bytecode Tcl object type implementation. Attempts to * generate an byte code internal form for the Tcl object "objPtr" by * compiling its string representation. * * Results: * The return value is a standard Tcl object result. If an error occurs * during compilation, an error message is left in the interpreter's * result unless "interp" is NULL. * * Side effects: * Frees the old internal representation. If no error occurs, then the * compiled code is stored as "objPtr"s bytecode representation. Also, if * debugging, initializes the "tcl_traceCompile" Tcl variable used to * trace compilations. * *---------------------------------------------------------------------- */ static int SetByteCodeFromAny( Tcl_Interp *interp, /* The interpreter for which the code is being * compiled. Must not be NULL. */ Tcl_Obj *objPtr) /* The object to make a ByteCode object. */ { if (interp == NULL) { return TCL_ERROR; } return TclSetByteCodeFromAny(interp, objPtr, NULL, NULL); } /* *---------------------------------------------------------------------- * * DupByteCodeInternalRep -- * * Part of the bytecode Tcl object type implementation. However, it does * not copy the internal representation of a bytecode Tcl_Obj, but * instead leaves the new object untyped (with a NULL type pointer). * Code will be compiled for the new object only if necessary. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ static void DupByteCodeInternalRep( TCL_UNUSED(Tcl_Obj *) /*srcPtr*/, TCL_UNUSED(Tcl_Obj *) /*copyPtr*/) { return; } /* *---------------------------------------------------------------------- * * FreeByteCodeInternalRep -- * * Part of the bytecode Tcl object type implementation. Frees the storage * associated with a bytecode object's internal representation unless its * code is actively being executed. * * Results: * None. * * Side effects: * The bytecode object's internal rep is marked invalid and its code gets * freed unless the code is actively being executed. In that case the * cleanup is delayed until the last execution of the code completes. * *---------------------------------------------------------------------- */ static void FreeByteCodeInternalRep( Tcl_Obj *objPtr) /* Object whose internal rep to free. */ { ByteCode *codePtr; ByteCodeGetIntRep(objPtr, &tclByteCodeType, codePtr); assert(codePtr != NULL); TclReleaseByteCode(codePtr); } /* *---------------------------------------------------------------------- * * TclReleaseByteCode -- * * This procedure does all the real work of freeing up a bytecode * object's ByteCode structure. It's called only when the structure's * reference count becomes zero. * * Results: * None. * * Side effects: * Frees objPtr's bytecode internal representation and sets its type NULL * Also releases its literals and frees its auxiliary data items. * *---------------------------------------------------------------------- */ void TclPreserveByteCode( ByteCode *codePtr) { codePtr->refCount++; } void TclReleaseByteCode( ByteCode *codePtr) { if (codePtr->refCount-- > 1) { return; } /* Just dropped to refcount==0. Clean up. */ CleanupByteCode(codePtr); } static void CleanupByteCode( ByteCode *codePtr) /* Points to the ByteCode to free. */ { Tcl_Interp *interp = (Tcl_Interp *) *codePtr->interpHandle; Interp *iPtr = (Interp *) interp; int numLitObjects = codePtr->numLitObjects; int numAuxDataItems = codePtr->numAuxDataItems; Tcl_Obj **objArrayPtr, *objPtr; const AuxData *auxDataPtr; int i; #ifdef TCL_COMPILE_STATS if (interp != NULL) { ByteCodeStats *statsPtr; Tcl_Time destroyTime; int lifetimeSec, lifetimeMicroSec, log2; statsPtr = &iPtr->stats; statsPtr->numByteCodesFreed++; statsPtr->currentSrcBytes -= (double) codePtr->numSrcBytes; statsPtr->currentByteCodeBytes -= (double) codePtr->structureSize; statsPtr->currentInstBytes -= (double) codePtr->numCodeBytes; statsPtr->currentLitBytes -= (double) codePtr->numLitObjects * sizeof(Tcl_Obj *); statsPtr->currentExceptBytes -= (double) codePtr->numExceptRanges * sizeof(ExceptionRange); statsPtr->currentAuxBytes -= (double) codePtr->numAuxDataItems * sizeof(AuxData); statsPtr->currentCmdMapBytes -= (double) codePtr->numCmdLocBytes; Tcl_GetTime(&destroyTime); lifetimeSec = destroyTime.sec - codePtr->createTime.sec; if (lifetimeSec > 2000) { /* avoid overflow */ lifetimeSec = 2000; } lifetimeMicroSec = 1000000 * lifetimeSec + (destroyTime.usec - codePtr->createTime.usec); log2 = TclLog2(lifetimeMicroSec); if (log2 > 31) { log2 = 31; } statsPtr->lifetimeCount[log2]++; } #endif /* TCL_COMPILE_STATS */ /* * A single heap object holds the ByteCode structure and its code, object, * command location, and auxiliary data arrays. This means we only need to * 1) decrement the ref counts of the LiteralEntry's in its literal array, * 2) call the free procs for the auxiliary data items, 3) free the * localCache if it is unused, and finally 4) free the ByteCode * structure's heap object. * * The case for TCL_BYTECODE_PRECOMPILED (precompiled ByteCodes, like * those generated from tbcload) is special, as they doesn't make use of * the global literal table. They instead maintain private references to * their literals which must be decremented. * * In order to insure a proper and efficient cleanup of the literal array * when it contains non-shared literals [Bug 983660], we also distinguish * the case of an interpreter being deleted (signaled by interp == NULL). * Also, as the interp deletion will remove the global literal table * anyway, we avoid the extra cost of updating it for each literal being * released. */ if (codePtr->flags & TCL_BYTECODE_PRECOMPILED) { objArrayPtr = codePtr->objArrayPtr; for (i = 0; i < numLitObjects; i++) { objPtr = *objArrayPtr; if (objPtr) { Tcl_DecrRefCount(objPtr); } objArrayPtr++; } codePtr->numLitObjects = 0; } else { objArrayPtr = codePtr->objArrayPtr; while (numLitObjects--) { /* TclReleaseLiteral calls Tcl_DecrRefCount() for us */ TclReleaseLiteral(interp, *objArrayPtr++); } } auxDataPtr = codePtr->auxDataArrayPtr; for (i = 0; i < numAuxDataItems; i++) { if (auxDataPtr->type->freeProc != NULL) { auxDataPtr->type->freeProc(auxDataPtr->clientData); } auxDataPtr++; } /* * TIP #280. Release the location data associated with this byte code * structure, if any. NOTE: The interp we belong to may be gone already, * and the data with it. * * See also tclBasic.c, DeleteInterpProc */ if (iPtr) { Tcl_HashEntry *hePtr = Tcl_FindHashEntry(iPtr->lineBCPtr, (char *) codePtr); if (hePtr) { ReleaseCmdWordData((ExtCmdLoc *)Tcl_GetHashValue(hePtr)); Tcl_DeleteHashEntry(hePtr); } } if (codePtr->localCachePtr && (codePtr->localCachePtr->refCount-- <= 1)) { TclFreeLocalCache(interp, codePtr->localCachePtr); } TclHandleRelease(codePtr->interpHandle); Tcl_Free(codePtr); } /* * --------------------------------------------------------------------- * * IsCompactibleCompileEnv -- * * Checks to see if we may apply some basic compaction optimizations to a * piece of bytecode. Idempotent. * * --------------------------------------------------------------------- */ static int IsCompactibleCompileEnv( CompileEnv *envPtr) { unsigned char *pc; int size; /* * Special: procedures in the '::tcl' namespace (or its children) are * considered to be well-behaved and so can have compaction applied even * if it would otherwise be invalid. */ if (envPtr->procPtr != NULL && envPtr->procPtr->cmdPtr != NULL && envPtr->procPtr->cmdPtr->nsPtr != NULL) { Namespace *nsPtr = envPtr->procPtr->cmdPtr->nsPtr; if (strcmp(nsPtr->fullName, "::tcl") == 0 || strncmp(nsPtr->fullName, "::tcl::", 7) == 0) { return 1; } } /* * Go through and ensure that no operation involved can cause a desired * change of bytecode sequence during running. This comes down to ensuring * that there are no mapped variables (due to traces) or calls to external * commands (traces, [uplevel] trickery). This is actually a very * conservative check; it turns down a lot of code that is OK in practice. */ for (pc = envPtr->codeStart ; pc < envPtr->codeNext ; pc += size) { switch (*pc) { /* Invokes */ case INST_INVOKE_STK1: case INST_INVOKE_STK4: case INST_INVOKE_EXPANDED: case INST_INVOKE_REPLACE: return 0; /* Runtime evals */ case INST_EVAL_STK: case INST_EXPR_STK: case INST_YIELD: return 0; /* Upvars */ case INST_UPVAR: case INST_NSUPVAR: case INST_VARIABLE: return 0; default: size = tclInstructionTable[*pc].numBytes; assert (size > 0); break; } } return 1; } /* *---------------------------------------------------------------------- * * Tcl_SubstObj -- * * This function performs the substitutions specified on the given string * as described in the user documentation for the "subst" Tcl command. * * Results: * A Tcl_Obj* containing the substituted string, or NULL to indicate that * an error occurred. * * Side effects: * See the user documentation. * *---------------------------------------------------------------------- */ Tcl_Obj * Tcl_SubstObj( Tcl_Interp *interp, /* Interpreter in which substitution occurs */ Tcl_Obj *objPtr, /* The value to be substituted. */ int flags) /* What substitutions to do. */ { NRE_callback *rootPtr = TOP_CB(interp); if (TclNRRunCallbacks(interp, Tcl_NRSubstObj(interp, objPtr, flags), rootPtr) != TCL_OK) { return NULL; } return Tcl_GetObjResult(interp); } /* *---------------------------------------------------------------------- * * Tcl_NRSubstObj -- * * Request substitution of a Tcl value by the NR stack. * * Results: * Returns TCL_OK. * * Side effects: * Compiles objPtr into bytecode that performs the substitutions as * governed by flags and places callbacks on the NR stack to execute * the bytecode and store the result in the interp. * *---------------------------------------------------------------------- */ int Tcl_NRSubstObj( Tcl_Interp *interp, Tcl_Obj *objPtr, int flags) { ByteCode *codePtr = CompileSubstObj(interp, objPtr, flags); /* TODO: Confirm we do not need this. */ /* Tcl_ResetResult(interp); */ return TclNRExecuteByteCode(interp, codePtr); } /* *---------------------------------------------------------------------- * * CompileSubstObj -- * * Compile a Tcl value into ByteCode implementing its substitution, as * governed by flags. * * Results: * A (ByteCode *) is returned pointing to the resulting ByteCode. * * Side effects: * The Tcl_ObjType of objPtr is changed to the "substcode" type, and the * ByteCode and governing flags value are kept in the internal rep for * faster operations the next time CompileSubstObj is called on the same * value. * *---------------------------------------------------------------------- */ static ByteCode * CompileSubstObj( Tcl_Interp *interp, Tcl_Obj *objPtr, int flags) { Interp *iPtr = (Interp *) interp; ByteCode *codePtr = NULL; ByteCodeGetIntRep(objPtr, &substCodeType, codePtr); if (codePtr != NULL) { Namespace *nsPtr = iPtr->varFramePtr->nsPtr; if (flags != PTR2INT(SubstFlags(objPtr)) || ((Interp *) *codePtr->interpHandle != iPtr) || (codePtr->compileEpoch != iPtr->compileEpoch) || (codePtr->nsPtr != nsPtr) || (codePtr->nsEpoch != nsPtr->resolverEpoch) || (codePtr->localCachePtr != iPtr->varFramePtr->localCachePtr)) { Tcl_StoreIntRep(objPtr, &substCodeType, NULL); codePtr = NULL; } } if (codePtr == NULL) { CompileEnv compEnv; size_t numBytes; const char *bytes = TclGetStringFromObj(objPtr, &numBytes); /* TODO: Check for more TIP 280 */ TclInitCompileEnv(interp, &compEnv, bytes, numBytes, NULL, 0); TclSubstCompile(interp, bytes, numBytes, flags, 1, &compEnv); TclEmitOpcode(INST_DONE, &compEnv); codePtr = TclInitByteCodeObj(objPtr, &substCodeType, &compEnv); TclFreeCompileEnv(&compEnv); SubstFlags(objPtr) = INT2PTR(flags); if (iPtr->varFramePtr->localCachePtr) { codePtr->localCachePtr = iPtr->varFramePtr->localCachePtr; codePtr->localCachePtr->refCount++; } #ifdef TCL_COMPILE_DEBUG if (tclTraceCompile >= 2) { TclPrintByteCodeObj(interp, objPtr); fflush(stdout); } #endif /* TCL_COMPILE_DEBUG */ } return codePtr; } /* *---------------------------------------------------------------------- * * FreeSubstCodeInternalRep -- * * Part of the substcode Tcl object type implementation. Frees the * storage associated with a substcode object's internal representation * unless its code is actively being executed. * * Results: * None. * * Side effects: * The substcode object's internal rep is marked invalid and its code * gets freed unless the code is actively being executed. In that case * the cleanup is delayed until the last execution of the code completes. * *---------------------------------------------------------------------- */ static void FreeSubstCodeInternalRep( Tcl_Obj *objPtr) /* Object whose internal rep to free. */ { ByteCode *codePtr; ByteCodeGetIntRep(objPtr, &substCodeType, codePtr); assert(codePtr != NULL); TclReleaseByteCode(codePtr); } static void ReleaseCmdWordData( ExtCmdLoc *eclPtr) { int i; if (eclPtr->type == TCL_LOCATION_SOURCE) { Tcl_DecrRefCount(eclPtr->path); } for (i=0 ; inuloc ; i++) { Tcl_Free(eclPtr->loc[i].line); } if (eclPtr->loc != NULL) { Tcl_Free(eclPtr->loc); } Tcl_Free(eclPtr); } /* *---------------------------------------------------------------------- * * TclInitCompileEnv -- * * Initializes a CompileEnv compilation environment structure for the * compilation of a string in an interpreter. * * Results: * None. * * Side effects: * The CompileEnv structure is initialized. * *---------------------------------------------------------------------- */ void TclInitCompileEnv( Tcl_Interp *interp, /* The interpreter for which a CompileEnv * structure is initialized. */ CompileEnv *envPtr,/* Points to the CompileEnv structure to * initialize. */ const char *stringPtr, /* The source string to be compiled. */ size_t numBytes, /* Number of bytes in source string. */ const CmdFrame *invoker, /* Location context invoking the bcc */ int word) /* Index of the word in that context getting * compiled */ { Interp *iPtr = (Interp *) interp; assert(tclInstructionTable[LAST_INST_OPCODE].name == NULL); envPtr->iPtr = iPtr; envPtr->source = stringPtr; envPtr->numSrcBytes = numBytes; envPtr->procPtr = iPtr->compiledProcPtr; iPtr->compiledProcPtr = NULL; envPtr->numCommands = 0; envPtr->exceptDepth = 0; envPtr->maxExceptDepth = 0; envPtr->maxStackDepth = 0; envPtr->currStackDepth = 0; TclInitLiteralTable(&envPtr->localLitTable); envPtr->codeStart = envPtr->staticCodeSpace; envPtr->codeNext = envPtr->codeStart; envPtr->codeEnd = envPtr->codeStart + COMPILEENV_INIT_CODE_BYTES; envPtr->mallocedCodeArray = 0; envPtr->literalArrayPtr = envPtr->staticLiteralSpace; envPtr->literalArrayNext = 0; envPtr->literalArrayEnd = COMPILEENV_INIT_NUM_OBJECTS; envPtr->mallocedLiteralArray = 0; envPtr->exceptArrayPtr = envPtr->staticExceptArraySpace; envPtr->exceptAuxArrayPtr = envPtr->staticExAuxArraySpace; envPtr->exceptArrayNext = 0; envPtr->exceptArrayEnd = COMPILEENV_INIT_EXCEPT_RANGES; envPtr->mallocedExceptArray = 0; envPtr->cmdMapPtr = envPtr->staticCmdMapSpace; envPtr->cmdMapEnd = COMPILEENV_INIT_CMD_MAP_SIZE; envPtr->mallocedCmdMap = 0; envPtr->atCmdStart = 1; envPtr->expandCount = 0; /* * TIP #280: Set up the extended command location information, based on * the context invoking the byte code compiler. This structure is used to * keep the per-word line information for all compiled commands. * * See also tclBasic.c, TclEvalObjEx, for the equivalent code in the * non-compiling evaluator */ envPtr->extCmdMapPtr = (ExtCmdLoc *)Tcl_Alloc(sizeof(ExtCmdLoc)); envPtr->extCmdMapPtr->loc = NULL; envPtr->extCmdMapPtr->nloc = 0; envPtr->extCmdMapPtr->nuloc = 0; envPtr->extCmdMapPtr->path = NULL; if (invoker == NULL) { /* * Initialize the compiler for relative counting in case of a * dynamic context. */ envPtr->line = 1; if (iPtr->evalFlags & TCL_EVAL_FILE) { iPtr->evalFlags &= ~TCL_EVAL_FILE; envPtr->extCmdMapPtr->type = TCL_LOCATION_SOURCE; if (iPtr->scriptFile) { /* * Normalization here, to have the correct pwd. Should have * negligible impact on performance, as the norm should have * been done already by the 'source' invoking us, and it * caches the result. */ Tcl_Obj *norm = Tcl_FSGetNormalizedPath(interp, iPtr->scriptFile); if (norm == NULL) { /* * Error message in the interp result. No place to put it. * And no place to serve the error itself to either. Fake * a path, empty string. */ TclNewLiteralStringObj(envPtr->extCmdMapPtr->path, ""); } else { envPtr->extCmdMapPtr->path = norm; } } else { TclNewLiteralStringObj(envPtr->extCmdMapPtr->path, ""); } Tcl_IncrRefCount(envPtr->extCmdMapPtr->path); } else { envPtr->extCmdMapPtr->type = (envPtr->procPtr ? TCL_LOCATION_PROC : TCL_LOCATION_BC); } } else { /* * Initialize the compiler using the context, making counting absolute * to that context. Note that the context can be byte code execution. * In that case we have to fill out the missing pieces (line, path, * ...) which may make change the type as well. */ CmdFrame *ctxPtr = (CmdFrame *)TclStackAlloc(interp, sizeof(CmdFrame)); int pc = 0; *ctxPtr = *invoker; if (invoker->type == TCL_LOCATION_BC) { /* * Note: Type BC => ctx.data.eval.path is not used. * ctx.data.tebc.codePtr is used instead. */ TclGetSrcInfoForPc(ctxPtr); pc = 1; } if ((ctxPtr->nline <= word) || (ctxPtr->line[word] < 0)) { /* * Word is not a literal, relative counting. */ envPtr->line = 1; envPtr->extCmdMapPtr->type = (envPtr->procPtr ? TCL_LOCATION_PROC : TCL_LOCATION_BC); if (pc && (ctxPtr->type == TCL_LOCATION_SOURCE)) { /* * The reference made by 'TclGetSrcInfoForPc' is dead. */ Tcl_DecrRefCount(ctxPtr->data.eval.path); } } else { envPtr->line = ctxPtr->line[word]; envPtr->extCmdMapPtr->type = ctxPtr->type; if (ctxPtr->type == TCL_LOCATION_SOURCE) { envPtr->extCmdMapPtr->path = ctxPtr->data.eval.path; if (pc) { /* * The reference 'TclGetSrcInfoForPc' made is transfered. */ ctxPtr->data.eval.path = NULL; } else { /* * We have a new reference here. */ Tcl_IncrRefCount(envPtr->extCmdMapPtr->path); } } } TclStackFree(interp, ctxPtr); } envPtr->extCmdMapPtr->start = envPtr->line; /* * Initialize the data about invisible continuation lines as empty, i.e. * not used. The caller (TclSetByteCodeFromAny) will set this up, if such * data is available. */ envPtr->clNext = NULL; envPtr->auxDataArrayPtr = envPtr->staticAuxDataArraySpace; envPtr->auxDataArrayNext = 0; envPtr->auxDataArrayEnd = COMPILEENV_INIT_AUX_DATA_SIZE; envPtr->mallocedAuxDataArray = 0; } /* *---------------------------------------------------------------------- * * TclFreeCompileEnv -- * * Free the storage allocated in a CompileEnv compilation environment * structure. * * Results: * None. * * Side effects: * Allocated storage in the CompileEnv structure is freed. Note that its * local literal table is not deleted and its literal objects are not * released. In addition, storage referenced by its auxiliary data items * is not freed. This is done so that, when compilation is successful, * "ownership" of these objects and aux data items is handed over to the * corresponding ByteCode structure. * *---------------------------------------------------------------------- */ void TclFreeCompileEnv( CompileEnv *envPtr)/* Points to the CompileEnv structure. */ { if (envPtr->localLitTable.buckets != envPtr->localLitTable.staticBuckets){ Tcl_Free(envPtr->localLitTable.buckets); envPtr->localLitTable.buckets = envPtr->localLitTable.staticBuckets; } if (envPtr->iPtr) { /* * We never converted to Bytecode, so free the things we would * have transferred to it. */ int i; LiteralEntry *entryPtr = envPtr->literalArrayPtr; AuxData *auxDataPtr = envPtr->auxDataArrayPtr; for (i = 0; i < envPtr->literalArrayNext; i++) { TclReleaseLiteral((Tcl_Interp *)envPtr->iPtr, entryPtr->objPtr); entryPtr++; } #ifdef TCL_COMPILE_DEBUG TclVerifyGlobalLiteralTable(envPtr->iPtr); #endif /*TCL_COMPILE_DEBUG*/ for (i = 0; i < envPtr->auxDataArrayNext; i++) { if (auxDataPtr->type->freeProc != NULL) { auxDataPtr->type->freeProc(auxDataPtr->clientData); } auxDataPtr++; } } if (envPtr->mallocedCodeArray) { Tcl_Free(envPtr->codeStart); } if (envPtr->mallocedLiteralArray) { Tcl_Free(envPtr->literalArrayPtr); } if (envPtr->mallocedExceptArray) { Tcl_Free(envPtr->exceptArrayPtr); Tcl_Free(envPtr->exceptAuxArrayPtr); } if (envPtr->mallocedCmdMap) { Tcl_Free(envPtr->cmdMapPtr); } if (envPtr->mallocedAuxDataArray) { Tcl_Free(envPtr->auxDataArrayPtr); } if (envPtr->extCmdMapPtr) { ReleaseCmdWordData(envPtr->extCmdMapPtr); envPtr->extCmdMapPtr = NULL; } } /* *---------------------------------------------------------------------- * * TclWordKnownAtCompileTime -- * * Test whether the value of a token is completely known at compile time. * * Results: * Returns true if the tokenPtr argument points to a word value that is * completely known at compile time. Generally, values that are known at * compile time can be compiled to their values, while values that cannot * be known until substitution at runtime must be compiled to bytecode * instructions that perform that substitution. For several commands, * whether or not arguments are known at compile time determine whether * it is worthwhile to compile at all. * * Side effects: * When returning true, appends the known value of the word to the * unshared Tcl_Obj (*valuePtr), unless valuePtr is NULL. * *---------------------------------------------------------------------- */ int TclWordKnownAtCompileTime( Tcl_Token *tokenPtr, /* Points to Tcl_Token we should check */ Tcl_Obj *valuePtr) /* If not NULL, points to an unshared Tcl_Obj * to which we should append the known value * of the word. */ { int numComponents = tokenPtr->numComponents; Tcl_Obj *tempPtr = NULL; if (tokenPtr->type == TCL_TOKEN_SIMPLE_WORD) { if (valuePtr != NULL) { Tcl_AppendToObj(valuePtr, tokenPtr[1].start, tokenPtr[1].size); } return 1; } if (tokenPtr->type != TCL_TOKEN_WORD) { return 0; } tokenPtr++; if (valuePtr != NULL) { TclNewObj(tempPtr); Tcl_IncrRefCount(tempPtr); } while (numComponents--) { switch (tokenPtr->type) { case TCL_TOKEN_TEXT: if (tempPtr != NULL) { Tcl_AppendToObj(tempPtr, tokenPtr->start, tokenPtr->size); } break; case TCL_TOKEN_BS: if (tempPtr != NULL) { char utfBuf[4] = ""; size_t length = TclParseBackslash(tokenPtr->start, tokenPtr->size, NULL, utfBuf); Tcl_AppendToObj(tempPtr, utfBuf, length); } break; default: if (tempPtr != NULL) { Tcl_DecrRefCount(tempPtr); } return 0; } tokenPtr++; } if (valuePtr != NULL) { Tcl_AppendObjToObj(valuePtr, tempPtr); Tcl_DecrRefCount(tempPtr); } return 1; } /* *---------------------------------------------------------------------- * * TclCompileScript -- * * Compile a Tcl script in a string. * * Results: * The return value is TCL_OK on a successful compilation and TCL_ERROR * on failure. If TCL_ERROR is returned, then the interpreter's result * contains an error message. * * Side effects: * Adds instructions to envPtr to evaluate the script at runtime. * *---------------------------------------------------------------------- */ static int ExpandRequested( Tcl_Token *tokenPtr, size_t numWords) { /* Determine whether any words of the command require expansion */ while (numWords--) { if (tokenPtr->type == TCL_TOKEN_EXPAND_WORD) { return 1; } tokenPtr = TokenAfter(tokenPtr); } return 0; } static void CompileCmdLiteral( Tcl_Interp *interp, Tcl_Obj *cmdObj, CompileEnv *envPtr) { const char *bytes; Command *cmdPtr; int cmdLitIdx, extraLiteralFlags = LITERAL_CMD_NAME; size_t length; cmdPtr = (Command *) Tcl_GetCommandFromObj(interp, cmdObj); if ((cmdPtr != NULL) && (cmdPtr->flags & CMD_VIA_RESOLVER)) { extraLiteralFlags |= LITERAL_UNSHARED; } bytes = TclGetStringFromObj(cmdObj, &length); cmdLitIdx = TclRegisterLiteral(envPtr, bytes, length, extraLiteralFlags); if (cmdPtr && TclRoutineHasName(cmdPtr)) { TclSetCmdNameObj(interp, TclFetchLiteral(envPtr, cmdLitIdx), cmdPtr); } TclEmitPush(cmdLitIdx, envPtr); } void TclCompileInvocation( Tcl_Interp *interp, Tcl_Token *tokenPtr, Tcl_Obj *cmdObj, size_t numWords, CompileEnv *envPtr) { DefineLineInformation; size_t wordIdx = 0; int depth = TclGetStackDepth(envPtr); if (cmdObj) { CompileCmdLiteral(interp, cmdObj, envPtr); wordIdx = 1; tokenPtr = TokenAfter(tokenPtr); } for (; wordIdx < numWords; wordIdx++, tokenPtr = TokenAfter(tokenPtr)) { int objIdx; SetLineInformation(wordIdx); if (tokenPtr->type != TCL_TOKEN_SIMPLE_WORD) { CompileTokens(envPtr, tokenPtr, interp); continue; } objIdx = TclRegisterLiteral(envPtr, tokenPtr[1].start, tokenPtr[1].size, 0); if (envPtr->clNext) { TclContinuationsEnterDerived(TclFetchLiteral(envPtr, objIdx), tokenPtr[1].start - envPtr->source, envPtr->clNext); } TclEmitPush(objIdx, envPtr); } if (wordIdx <= 255) { TclEmitInvoke(envPtr, INST_INVOKE_STK1, wordIdx); } else { TclEmitInvoke(envPtr, INST_INVOKE_STK4, wordIdx); } TclCheckStackDepth(depth+1, envPtr); } static void CompileExpanded( Tcl_Interp *interp, Tcl_Token *tokenPtr, Tcl_Obj *cmdObj, int numWords, CompileEnv *envPtr) { DefineLineInformation; int wordIdx = 0; int depth = TclGetStackDepth(envPtr); StartExpanding(envPtr); if (cmdObj) { CompileCmdLiteral(interp, cmdObj, envPtr); wordIdx = 1; tokenPtr = TokenAfter(tokenPtr); } for (; wordIdx < numWords; wordIdx++, tokenPtr = TokenAfter(tokenPtr)) { int objIdx; SetLineInformation(wordIdx); if (tokenPtr->type != TCL_TOKEN_SIMPLE_WORD) { CompileTokens(envPtr, tokenPtr, interp); if (tokenPtr->type == TCL_TOKEN_EXPAND_WORD) { TclEmitInstInt4(INST_EXPAND_STKTOP, envPtr->currStackDepth, envPtr); } continue; } objIdx = TclRegisterLiteral(envPtr, tokenPtr[1].start, tokenPtr[1].size, 0); if (envPtr->clNext) { TclContinuationsEnterDerived(TclFetchLiteral(envPtr, objIdx), tokenPtr[1].start - envPtr->source, envPtr->clNext); } TclEmitPush(objIdx, envPtr); } /* * The stack depth during argument expansion can only be managed at * runtime, as the number of elements in the expanded lists is not known * at compile time. We adjust here the stack depth estimate so that it is * correct after the command with expanded arguments returns. * * The end effect of this command's invocation is that all the words of * the command are popped from the stack, and the result is pushed: the * stack top changes by (1-wordIdx). * * Note that the estimates are not correct while the command is being * prepared and run, INST_EXPAND_STKTOP is not stack-neutral in general. */ TclEmitInvoke(envPtr, INST_INVOKE_EXPANDED, wordIdx); TclCheckStackDepth(depth+1, envPtr); } static int CompileCmdCompileProc( Tcl_Interp *interp, Tcl_Parse *parsePtr, Command *cmdPtr, CompileEnv *envPtr) { DefineLineInformation; int unwind = 0, incrOffset = -1; int depth = TclGetStackDepth(envPtr); /* * Emit of the INST_START_CMD instruction is controlled by the value of * envPtr->atCmdStart: * * atCmdStart == 2 : We are not using the INST_START_CMD instruction. * atCmdStart == 1 : INST_START_CMD was the last instruction emitted. * : We do not need to emit another. Instead we * : increment the number of cmds started at it (except * : for the special case at the start of a script.) * atCmdStart == 0 : The last instruction was something else. We need * : to emit INST_START_CMD here. */ switch (envPtr->atCmdStart) { case 0: unwind = tclInstructionTable[INST_START_CMD].numBytes; TclEmitInstInt4(INST_START_CMD, 0, envPtr); incrOffset = envPtr->codeNext - envPtr->codeStart; TclEmitInt4(0, envPtr); break; case 1: if (envPtr->codeNext > envPtr->codeStart) { incrOffset = envPtr->codeNext - 4 - envPtr->codeStart; } break; case 2: /* Nothing to do */ ; } if (TCL_OK == TclAttemptCompileProc(interp, parsePtr, 1, cmdPtr, envPtr)) { if (incrOffset >= 0) { /* * We successfully compiled a command. Increment the number of * commands that start at the currently active INST_START_CMD. */ unsigned char *incrPtr = envPtr->codeStart + incrOffset; unsigned char *startPtr = incrPtr - 5; TclIncrUInt4AtPtr(incrPtr, 1); if (unwind) { /* We started the INST_START_CMD. Record the code length. */ TclStoreInt4AtPtr(envPtr->codeNext - startPtr, startPtr + 1); } } TclCheckStackDepth(depth+1, envPtr); return TCL_OK; } envPtr->codeNext -= unwind; /* Unwind INST_START_CMD */ /* * Throw out any line information generated by the failed compile attempt. */ while (mapPtr->nuloc - 1 > eclIndex) { mapPtr->nuloc--; Tcl_Free(mapPtr->loc[mapPtr->nuloc].line); mapPtr->loc[mapPtr->nuloc].line = NULL; } /* * Reset the index of next command. Toss out any from failed nested * partial compiles. */ envPtr->numCommands = mapPtr->nuloc; return TCL_ERROR; } static int CompileCommandTokens( Tcl_Interp *interp, Tcl_Parse *parsePtr, CompileEnv *envPtr) { Interp *iPtr = (Interp *) interp; Tcl_Token *tokenPtr = parsePtr->tokenPtr; ExtCmdLoc *eclPtr = envPtr->extCmdMapPtr; Tcl_Obj *cmdObj; Command *cmdPtr = NULL; int code = TCL_ERROR; int cmdKnown, expand = -1; int *wlines, wlineat; int cmdLine = envPtr->line; int *clNext = envPtr->clNext; int cmdIdx = envPtr->numCommands; int startCodeOffset = envPtr->codeNext - envPtr->codeStart; int depth = TclGetStackDepth(envPtr); assert (parsePtr->numWords > 0); /* Pre-Compile */ TclNewObj(cmdObj); envPtr->numCommands++; EnterCmdStartData(envPtr, cmdIdx, parsePtr->commandStart - envPtr->source, startCodeOffset); /* * TIP #280. Scan the words and compute the extended location information. * The map first contain full per-word line information for use by the * compiler. This is later replaced by a reduced form which signals * non-literal words, stored in 'wlines'. */ EnterCmdWordData(eclPtr, parsePtr->commandStart - envPtr->source, parsePtr->tokenPtr, parsePtr->commandStart, parsePtr->numWords, cmdLine, clNext, &wlines, envPtr); wlineat = eclPtr->nuloc - 1; envPtr->line = eclPtr->loc[wlineat].line[0]; envPtr->clNext = eclPtr->loc[wlineat].next[0]; /* Do we know the command word? */ Tcl_IncrRefCount(cmdObj); tokenPtr = parsePtr->tokenPtr; cmdKnown = TclWordKnownAtCompileTime(tokenPtr, cmdObj); /* Is this a command we should (try to) compile with a compileProc ? */ if (cmdKnown && !(iPtr->flags & DONT_COMPILE_CMDS_INLINE)) { cmdPtr = (Command *) Tcl_GetCommandFromObj(interp, cmdObj); if (cmdPtr) { /* * Found a command. Test the ways we can be told not to attempt * to compile it. */ if ((cmdPtr->compileProc == NULL) || (cmdPtr->nsPtr->flags & NS_SUPPRESS_COMPILATION) || (cmdPtr->flags & CMD_HAS_EXEC_TRACES)) { cmdPtr = NULL; } } if (cmdPtr && !(cmdPtr->flags & CMD_COMPILES_EXPANDED)) { expand = ExpandRequested(parsePtr->tokenPtr, parsePtr->numWords); if (expand) { /* We need to expand, but compileProc cannot. */ cmdPtr = NULL; } } } /* If cmdPtr != NULL, we will try to call cmdPtr->compileProc */ if (cmdPtr) { code = CompileCmdCompileProc(interp, parsePtr, cmdPtr, envPtr); } if (code == TCL_ERROR) { if (expand < 0) { expand = ExpandRequested(parsePtr->tokenPtr, parsePtr->numWords); } if (expand) { CompileExpanded(interp, parsePtr->tokenPtr, cmdKnown ? cmdObj : NULL, parsePtr->numWords, envPtr); } else { TclCompileInvocation(interp, parsePtr->tokenPtr, cmdKnown ? cmdObj : NULL, parsePtr->numWords, envPtr); } } Tcl_DecrRefCount(cmdObj); TclEmitOpcode(INST_POP, envPtr); EnterCmdExtentData(envPtr, cmdIdx, parsePtr->term - parsePtr->commandStart, (envPtr->codeNext-envPtr->codeStart) - startCodeOffset); /* * TIP #280: Free full form of per-word line data and insert the reduced * form now */ envPtr->line = cmdLine; envPtr->clNext = clNext; Tcl_Free(eclPtr->loc[wlineat].line); Tcl_Free(eclPtr->loc[wlineat].next); eclPtr->loc[wlineat].line = wlines; eclPtr->loc[wlineat].next = NULL; TclCheckStackDepth(depth, envPtr); return cmdIdx; } void TclCompileScript( Tcl_Interp *interp, /* Used for error and status reporting. Also * serves as context for finding and compiling * commands. May not be NULL. */ const char *script, /* The source script to compile. */ size_t numBytes, /* Number of bytes in script. If -1, the * script consists of all bytes up to the * first null character. */ CompileEnv *envPtr) /* Holds resulting instructions. */ { int lastCmdIdx = -1; /* Index into envPtr->cmdMapPtr of the last * command this routine compiles into bytecode. * Initial value of -1 indicates this routine * has not yet generated any bytecode. */ const char *p = script; /* Where we are in our compile. */ int depth = TclGetStackDepth(envPtr); Interp *iPtr = (Interp *) interp; if (envPtr->iPtr == NULL) { Tcl_Panic("TclCompileScript() called on uninitialized CompileEnv"); } /* * Check depth to avoid overflow of the C execution stack by too many * nested calls of TclCompileScript (considering interp recursionlimit). * Factor 5/4 (1.25) is used to avoid too mistaken limit recognition * during "mixed" evaluation and compilation process (nested eval+compile) * and is good enough for default recursionlimit (1000). */ if (iPtr->numLevels / 5 > iPtr->maxNestingDepth / 4) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "too many nested compilations (infinite loop?)", -1)); Tcl_SetErrorCode(interp, "TCL", "LIMIT", "STACK", NULL); TclCompileSyntaxError(interp, envPtr); return; } /* Each iteration compiles one command from the script. */ if (numBytes + 1 > 1) { /* * Don't use system stack (size of Tcl_Parse is ca. 400 bytes), so * many nested compilations (body enclosed in body) can cause abnormal * program termination with a stack overflow exception, bug [fec0c17d39]. */ Tcl_Parse *parsePtr = (Tcl_Parse *)Tcl_Alloc(sizeof(Tcl_Parse)); do { const char *next; if (TCL_OK != Tcl_ParseCommand(interp, p, numBytes, 0, parsePtr)) { /* * Compile bytecodes to report the parsePtr error at runtime. */ Tcl_LogCommandInfo(interp, script, parsePtr->commandStart, parsePtr->term + 1 - parsePtr->commandStart); TclCompileSyntaxError(interp, envPtr); Tcl_Free(parsePtr); return; } #ifdef TCL_COMPILE_DEBUG /* * If tracing, print a line for each top level command compiled. * TODO: Suppress when numWords == 0 ? */ if ((tclTraceCompile >= 1) && (envPtr->procPtr == NULL)) { int commandLength = parsePtr->term - parsePtr->commandStart; fprintf(stdout, " Compiling: "); TclPrintSource(stdout, parsePtr->commandStart, TclMin(commandLength, 55)); fprintf(stdout, "\n"); } #endif /* * TIP #280: Count newlines before the command start. * (See test info-30.33). */ TclAdvanceLines(&envPtr->line, p, parsePtr->commandStart); TclAdvanceContinuations(&envPtr->line, &envPtr->clNext, parsePtr->commandStart - envPtr->source); /* * Advance parser to the next command in the script. */ next = parsePtr->commandStart + parsePtr->commandSize; numBytes -= next - p; p = next; if (parsePtr->numWords == 0) { /* * The "command" parsed has no words. In this case we can skip * the rest of the loop body. With no words, clearly * CompileCommandTokens() has nothing to do. Since the parser * aggressively sucks up leading comment and white space, * including newlines, parsePtr->commandStart must be pointing at * either the end of script, or a command-terminating semi-colon. * In either case, the TclAdvance*() calls have nothing to do. * Finally, when no words are parsed, no tokens have been * allocated at parsePtr->tokenPtr so there's also nothing for * Tcl_FreeParse() to do. * * The advantage of this shortcut is that CompileCommandTokens() * can be written with an assumption that parsePtr->numWords > 0, with * the implication the CCT() always generates bytecode. */ continue; } /* * Avoid stack exhaustion by too many nested calls of TclCompileScript * (considering interp recursionlimit). */ iPtr->numLevels++; lastCmdIdx = CompileCommandTokens(interp, parsePtr, envPtr); iPtr->numLevels--; /* * TIP #280: Track lines in the just compiled command. */ TclAdvanceLines(&envPtr->line, parsePtr->commandStart, p); TclAdvanceContinuations(&envPtr->line, &envPtr->clNext, p - envPtr->source); Tcl_FreeParse(parsePtr); } while (numBytes > 0); Tcl_Free(parsePtr); } if (lastCmdIdx == -1) { /* * Compiling the script yielded no bytecode. The script must be all * whitespace, comments, and empty commands. Such scripts are defined * to successfully produce the empty string result, so we emit the * simple bytecode that makes that happen. */ PushStringLiteral(envPtr, ""); } else { /* * We compiled at least one command to bytecode. The routine * CompileCommandTokens() follows the bytecode of each compiled * command with an INST_POP, so that stack balance is maintained when * several commands are in sequence. (The result of each command is * thrown away before moving on to the next command). For the last * command compiled, we need to undo that INST_POP so that the result * of the last command becomes the result of the script. The code * here removes that trailing INST_POP. */ envPtr->cmdMapPtr[lastCmdIdx].numCodeBytes--; envPtr->codeNext--; envPtr->currStackDepth++; } TclCheckStackDepth(depth+1, envPtr); } /* *---------------------------------------------------------------------- * * TclCompileTokens -- * * Given an array of tokens parsed from a Tcl command (e.g., the tokens * that make up a word) this procedure emits instructions to evaluate the * tokens and concatenate their values to form a single result value on * the interpreter's runtime evaluation stack. * * Results: * The return value is a standard Tcl result. If an error occurs, an * error message is left in the interpreter's result. * * Side effects: * Instructions are added to envPtr to push and evaluate the tokens at * runtime. * *---------------------------------------------------------------------- */ void TclCompileVarSubst( Tcl_Interp *interp, Tcl_Token *tokenPtr, CompileEnv *envPtr) { const char *p, *name = tokenPtr[1].start; size_t i, nameBytes = tokenPtr[1].size; int localVar, localVarName = 1; /* * Determine how the variable name should be handled: if it contains any * namespace qualifiers it is not a local variable (localVarName=-1); if * it looks like an array element and the token has a single component, it * should not be created here [Bug 569438] (localVarName=0); otherwise, * the local variable can safely be created (localVarName=1). */ for (i = 0, p = name; i < nameBytes; i++, p++) { if ((*p == ':') && (i < nameBytes-1) && (*(p+1) == ':')) { localVarName = -1; break; } else if ((*p == '(') && (tokenPtr->numComponents == 1) && (*(name + nameBytes - 1) == ')')) { localVarName = 0; break; } } /* * Either push the variable's name, or find its index in the array * of local variables in a procedure frame. */ localVar = -1; if (localVarName != -1) { localVar = TclFindCompiledLocal(name, nameBytes, localVarName, envPtr); } if (localVar < 0) { PushLiteral(envPtr, name, nameBytes); } /* * Emit instructions to load the variable. */ TclAdvanceLines(&envPtr->line, tokenPtr[1].start, tokenPtr[1].start + tokenPtr[1].size); if (tokenPtr->numComponents == 1) { if (localVar < 0) { TclEmitOpcode(INST_LOAD_STK, envPtr); } else if (localVar <= 255) { TclEmitInstInt1(INST_LOAD_SCALAR1, localVar, envPtr); } else { TclEmitInstInt4(INST_LOAD_SCALAR4, localVar, envPtr); } } else { TclCompileTokens(interp, tokenPtr+2, tokenPtr->numComponents-1, envPtr); if (localVar < 0) { TclEmitOpcode(INST_LOAD_ARRAY_STK, envPtr); } else if (localVar <= 255) { TclEmitInstInt1(INST_LOAD_ARRAY1, localVar, envPtr); } else { TclEmitInstInt4(INST_LOAD_ARRAY4, localVar, envPtr); } } } void TclCompileTokens( Tcl_Interp *interp, /* Used for error and status reporting. */ Tcl_Token *tokenPtr, /* Pointer to first in an array of tokens to * compile. */ int count, /* Number of tokens to consider at tokenPtr. * Must be at least 1. */ CompileEnv *envPtr) /* Holds the resulting instructions. */ { Tcl_DString textBuffer; /* Holds concatenated chars from adjacent * TCL_TOKEN_TEXT, TCL_TOKEN_BS tokens. */ char buffer[4] = ""; int i, numObjsToConcat, adjust; size_t length; unsigned char *entryCodeNext = envPtr->codeNext; #define NUM_STATIC_POS 20 int isLiteral, maxNumCL, numCL; int *clPosition = NULL; int depth = TclGetStackDepth(envPtr); /* * For the handling of continuation lines in literals we first check if * this is actually a literal. For if not we can forego the additional * processing. Otherwise we pre-allocate a small table to store the * locations of all continuation lines we find in this literal, if any. * The table is extended if needed. * * Note: Different to the equivalent code in function 'TclSubstTokens()' * (see file "tclParse.c") we do not seem to need the 'adjust' variable. * We also do not seem to need code which merges continuation line * information of multiple words which concat'd at runtime. Either that or * I have not managed to find a test case for these two possibilities yet. * It might be a difference between compile- versus run-time processing. */ numCL = 0; maxNumCL = 0; isLiteral = 1; for (i=0 ; i < count; i++) { if ((tokenPtr[i].type != TCL_TOKEN_TEXT) && (tokenPtr[i].type != TCL_TOKEN_BS)) { isLiteral = 0; break; } } if (isLiteral) { maxNumCL = NUM_STATIC_POS; clPosition = (int *)Tcl_Alloc(maxNumCL * sizeof(int)); } adjust = 0; Tcl_DStringInit(&textBuffer); numObjsToConcat = 0; for ( ; count > 0; count--, tokenPtr++) { switch (tokenPtr->type) { case TCL_TOKEN_TEXT: TclDStringAppendToken(&textBuffer, tokenPtr); TclAdvanceLines(&envPtr->line, tokenPtr->start, tokenPtr->start + tokenPtr->size); break; case TCL_TOKEN_BS: length = TclParseBackslash(tokenPtr->start, tokenPtr->size, NULL, buffer); Tcl_DStringAppend(&textBuffer, buffer, length); /* * If the backslash sequence we found is in a literal, and * represented a continuation line, we compute and store its * location (as char offset to the beginning of the _result_ * script). We may have to extend the table of locations. * * Note that the continuation line information is relevant even if * the word we are processing is not a literal, as it can affect * nested commands. See the branch for TCL_TOKEN_COMMAND below, * where the adjustment we are tracking here is taken into * account. The good thing is that we do not need a table of * everything, just the number of lines we have to add as * correction. */ if ((length == 1) && (buffer[0] == ' ') && (tokenPtr->start[1] == '\n')) { if (isLiteral) { int clPos = Tcl_DStringLength(&textBuffer); if (numCL >= maxNumCL) { maxNumCL *= 2; clPosition = (int *)Tcl_Realloc(clPosition, maxNumCL * sizeof(int)); } clPosition[numCL] = clPos; numCL ++; } adjust++; } break; case TCL_TOKEN_COMMAND: /* * Push any accumulated chars appearing before the command. */ if (Tcl_DStringLength(&textBuffer) > 0) { int literal = TclRegisterDStringLiteral(envPtr, &textBuffer); TclEmitPush(literal, envPtr); numObjsToConcat++; Tcl_DStringFree(&textBuffer); if (numCL) { TclContinuationsEnter(TclFetchLiteral(envPtr, literal), numCL, clPosition); } numCL = 0; } envPtr->line += adjust; TclCompileScript(interp, tokenPtr->start+1, tokenPtr->size-2, envPtr); envPtr->line -= adjust; numObjsToConcat++; break; case TCL_TOKEN_VARIABLE: /* * Push any accumulated chars appearing before the $. */ if (Tcl_DStringLength(&textBuffer) > 0) { int literal; literal = TclRegisterDStringLiteral(envPtr, &textBuffer); TclEmitPush(literal, envPtr); numObjsToConcat++; Tcl_DStringFree(&textBuffer); } TclCompileVarSubst(interp, tokenPtr, envPtr); numObjsToConcat++; count -= tokenPtr->numComponents; tokenPtr += tokenPtr->numComponents; break; default: Tcl_Panic("Unexpected token type in TclCompileTokens: %d; %.*s", tokenPtr->type, (int)tokenPtr->size, tokenPtr->start); } } /* * Push any accumulated characters appearing at the end. */ if (Tcl_DStringLength(&textBuffer) > 0) { int literal = TclRegisterDStringLiteral(envPtr, &textBuffer); TclEmitPush(literal, envPtr); numObjsToConcat++; if (numCL) { TclContinuationsEnter(TclFetchLiteral(envPtr, literal), numCL, clPosition); } numCL = 0; } /* * If necessary, concatenate the parts of the word. */ while (numObjsToConcat > 255) { TclEmitInstInt1(INST_STR_CONCAT1, 255, envPtr); numObjsToConcat -= 254; /* concat pushes 1 obj, the result */ } if (numObjsToConcat > 1) { TclEmitInstInt1(INST_STR_CONCAT1, numObjsToConcat, envPtr); } /* * If the tokens yielded no instructions, push an empty string. */ if (envPtr->codeNext == entryCodeNext) { PushStringLiteral(envPtr, ""); } Tcl_DStringFree(&textBuffer); /* * Release the temp table we used to collect the locations of continuation * lines, if any. */ if (maxNumCL) { Tcl_Free(clPosition); } TclCheckStackDepth(depth+1, envPtr); } /* *---------------------------------------------------------------------- * * TclCompileCmdWord -- * * Given an array of parse tokens for a word containing one or more Tcl * commands, emit inline instructions to execute them. This procedure * differs from TclCompileTokens in that a simple word such as a loop * body enclosed in braces is not just pushed as a string, but is itself * parsed into tokens and compiled. * * Results: * The return value is a standard Tcl result. If an error occurs, an * error message is left in the interpreter's result. * * Side effects: * Instructions are added to envPtr to execute the tokens at runtime. * *---------------------------------------------------------------------- */ void TclCompileCmdWord( Tcl_Interp *interp, /* Used for error and status reporting. */ Tcl_Token *tokenPtr, /* Pointer to first in an array of tokens for * a command word to compile inline. */ int count, /* Number of tokens to consider at tokenPtr. * Must be at least 1. */ CompileEnv *envPtr) /* Holds the resulting instructions. */ { if ((count == 1) && (tokenPtr->type == TCL_TOKEN_TEXT)) { /* * Handle the common case: if there is a single text token, compile it * into an inline sequence of instructions. */ TclCompileScript(interp, tokenPtr->start, tokenPtr->size, envPtr); } else { /* * Multiple tokens or the single token involves substitutions. Emit * instructions to invoke the eval command procedure at runtime on the * result of evaluating the tokens. */ TclCompileTokens(interp, tokenPtr, count, envPtr); TclEmitInvoke(envPtr, INST_EVAL_STK); } } /* *---------------------------------------------------------------------- * * TclCompileExprWords -- * * Given an array of parse tokens representing one or more words that * contain a Tcl expression, emit inline instructions to execute the * expression. This procedure differs from TclCompileExpr in that it * supports Tcl's two-level substitution semantics for expressions that * appear as command words. * * Results: * The return value is a standard Tcl result. If an error occurs, an * error message is left in the interpreter's result. * * Side effects: * Instructions are added to envPtr to execute the expression. * *---------------------------------------------------------------------- */ void TclCompileExprWords( Tcl_Interp *interp, /* Used for error and status reporting. */ Tcl_Token *tokenPtr, /* Points to first in an array of word tokens * tokens for the expression to compile * inline. */ int numWords, /* Number of word tokens starting at tokenPtr. * Must be at least 1. Each word token * contains one or more subtokens. */ CompileEnv *envPtr) /* Holds the resulting instructions. */ { Tcl_Token *wordPtr; int i, concatItems; /* * If the expression is a single word that doesn't require substitutions, * just compile its string into inline instructions. */ if ((numWords == 1) && (tokenPtr->type == TCL_TOKEN_SIMPLE_WORD)) { TclCompileExpr(interp, tokenPtr[1].start,tokenPtr[1].size, envPtr, 1); return; } /* * Emit code to call the expr command proc at runtime. Concatenate the * (already substituted once) expr tokens with a space between each. */ wordPtr = tokenPtr; for (i = 0; i < numWords; i++) { CompileTokens(envPtr, wordPtr, interp); if (i < (numWords - 1)) { PushStringLiteral(envPtr, " "); } wordPtr += wordPtr->numComponents + 1; } concatItems = 2*numWords - 1; while (concatItems > 255) { TclEmitInstInt1(INST_STR_CONCAT1, 255, envPtr); concatItems -= 254; } if (concatItems > 1) { TclEmitInstInt1(INST_STR_CONCAT1, concatItems, envPtr); } TclEmitOpcode(INST_EXPR_STK, envPtr); } /* *---------------------------------------------------------------------- * * TclCompileNoOp -- * * Function called to compile no-op's * * Results: * The return value is TCL_OK, indicating successful compilation. * * Side effects: * Instructions are added to envPtr to execute a no-op at runtime. No * result is pushed onto the stack: the compiler has to take care of this * itself if the last compiled command is a NoOp. * *---------------------------------------------------------------------- */ int TclCompileNoOp( Tcl_Interp *interp, /* Used for error reporting. */ Tcl_Parse *parsePtr, /* Points to a parse structure for the command * created by Tcl_ParseCommand. */ TCL_UNUSED(Command *), CompileEnv *envPtr) /* Holds resulting instructions. */ { Tcl_Token *tokenPtr; int i; tokenPtr = parsePtr->tokenPtr; for (i = 1; i < parsePtr->numWords; i++) { tokenPtr = tokenPtr + tokenPtr->numComponents + 1; if (tokenPtr->type != TCL_TOKEN_SIMPLE_WORD) { CompileTokens(envPtr, tokenPtr, interp); TclEmitOpcode(INST_POP, envPtr); } } PushStringLiteral(envPtr, ""); return TCL_OK; } /* *---------------------------------------------------------------------- * * TclInitByteCodeObj -- * * Create a ByteCode structure and initialize it from a CompileEnv * compilation environment structure. The ByteCode structure is smaller * and contains just that information needed to execute the bytecode * instructions resulting from compiling a Tcl script. The resulting * structure is placed in the specified object. * * Results: * A newly constructed ByteCode object is stored in the internal * representation of the objPtr. * * Side effects: * A single heap object is allocated to hold the new ByteCode structure * and its code, object, command location, and aux data arrays. Note that * "ownership" (i.e., the pointers to) the Tcl objects and aux data items * will be handed over to the new ByteCode structure from the CompileEnv * structure. * *---------------------------------------------------------------------- */ static void PreventCycle( Tcl_Obj *objPtr, CompileEnv *envPtr) { int i; for (i = 0; i < envPtr->literalArrayNext; i++) { if (objPtr == TclFetchLiteral(envPtr, i)) { /* * Prevent circular reference where the bytecode intrep of * a value contains a literal which is that same value. * If this is allowed to happen, refcount decrements may not * reach zero, and memory may leak. Bugs 467523, 3357771 * * NOTE: [Bugs 3392070, 3389764] We make a copy based completely * on the string value, and do not call Tcl_DuplicateObj() so we * can be sure we do not have any lingering cycles hiding in * the intrep. */ size_t numBytes; const char *bytes = TclGetStringFromObj(objPtr, &numBytes); Tcl_Obj *copyPtr = Tcl_NewStringObj(bytes, numBytes); Tcl_IncrRefCount(copyPtr); TclReleaseLiteral((Tcl_Interp *)envPtr->iPtr, objPtr); envPtr->literalArrayPtr[i].objPtr = copyPtr; } } } ByteCode * TclInitByteCode( CompileEnv *envPtr)/* Points to the CompileEnv structure from * which to create a ByteCode structure. */ { ByteCode *codePtr; size_t codeBytes, objArrayBytes, exceptArrayBytes, cmdLocBytes; size_t auxDataArrayBytes, structureSize; unsigned char *p; #ifdef TCL_COMPILE_DEBUG unsigned char *nextPtr; #endif int numLitObjects = envPtr->literalArrayNext; Namespace *namespacePtr; int i, isNew; Interp *iPtr; if (envPtr->iPtr == NULL) { Tcl_Panic("TclInitByteCodeObj() called on uninitialized CompileEnv"); } iPtr = envPtr->iPtr; codeBytes = envPtr->codeNext - envPtr->codeStart; objArrayBytes = envPtr->literalArrayNext * sizeof(Tcl_Obj *); exceptArrayBytes = envPtr->exceptArrayNext * sizeof(ExceptionRange); auxDataArrayBytes = envPtr->auxDataArrayNext * sizeof(AuxData); cmdLocBytes = GetCmdLocEncodingSize(envPtr); /* * Compute the total number of bytes needed for this bytecode. */ structureSize = sizeof(ByteCode); structureSize += TCL_ALIGN(codeBytes); /* align object array */ structureSize += TCL_ALIGN(objArrayBytes); /* align exc range arr */ structureSize += TCL_ALIGN(exceptArrayBytes); /* align AuxData array */ structureSize += auxDataArrayBytes; structureSize += cmdLocBytes; if (envPtr->iPtr->varFramePtr != NULL) { namespacePtr = envPtr->iPtr->varFramePtr->nsPtr; } else { namespacePtr = envPtr->iPtr->globalNsPtr; } p = (unsigned char *)Tcl_Alloc(structureSize); codePtr = (ByteCode *) p; codePtr->interpHandle = TclHandlePreserve(iPtr->handle); codePtr->compileEpoch = iPtr->compileEpoch; codePtr->nsPtr = namespacePtr; codePtr->nsEpoch = namespacePtr->resolverEpoch; codePtr->refCount = 0; TclPreserveByteCode(codePtr); if (namespacePtr->compiledVarResProc || iPtr->resolverPtr) { codePtr->flags = TCL_BYTECODE_RESOLVE_VARS; } else { codePtr->flags = 0; } codePtr->source = envPtr->source; codePtr->procPtr = envPtr->procPtr; codePtr->numCommands = envPtr->numCommands; codePtr->numSrcBytes = envPtr->numSrcBytes; codePtr->numCodeBytes = codeBytes; codePtr->numLitObjects = numLitObjects; codePtr->numExceptRanges = envPtr->exceptArrayNext; codePtr->numAuxDataItems = envPtr->auxDataArrayNext; codePtr->numCmdLocBytes = cmdLocBytes; codePtr->maxExceptDepth = envPtr->maxExceptDepth; codePtr->maxStackDepth = envPtr->maxStackDepth; p += sizeof(ByteCode); codePtr->codeStart = p; memcpy(p, envPtr->codeStart, codeBytes); p += TCL_ALIGN(codeBytes); /* align object array */ codePtr->objArrayPtr = (Tcl_Obj **) p; for (i = 0; i < numLitObjects; i++) { codePtr->objArrayPtr[i] = TclFetchLiteral(envPtr, i); } p += TCL_ALIGN(objArrayBytes); /* align exception range array */ if (exceptArrayBytes > 0) { codePtr->exceptArrayPtr = (ExceptionRange *) p; memcpy(p, envPtr->exceptArrayPtr, exceptArrayBytes); } else { codePtr->exceptArrayPtr = NULL; } p += TCL_ALIGN(exceptArrayBytes); /* align AuxData array */ if (auxDataArrayBytes > 0) { codePtr->auxDataArrayPtr = (AuxData *) p; memcpy(p, envPtr->auxDataArrayPtr, auxDataArrayBytes); } else { codePtr->auxDataArrayPtr = NULL; } p += auxDataArrayBytes; #ifndef TCL_COMPILE_DEBUG EncodeCmdLocMap(envPtr, codePtr, (unsigned char *) p); #else nextPtr = EncodeCmdLocMap(envPtr, codePtr, (unsigned char *) p); if (((size_t)(nextPtr - p)) != cmdLocBytes) { Tcl_Panic("TclInitByteCodeObj: encoded cmd location bytes %lu != expected size %lu", (unsigned long)(nextPtr - p), (unsigned long)cmdLocBytes); } #endif /* * Record various compilation-related statistics about the new ByteCode * structure. Don't include overhead for statistics-related fields. */ #ifdef TCL_COMPILE_STATS codePtr->structureSize = structureSize - (sizeof(size_t) + sizeof(Tcl_Time)); Tcl_GetTime(&codePtr->createTime); RecordByteCodeStats(codePtr); #endif /* TCL_COMPILE_STATS */ /* * TIP #280. Associate the extended per-word line information with the * byte code object (internal rep), for use with the bc compiler. */ Tcl_SetHashValue(Tcl_CreateHashEntry(iPtr->lineBCPtr, codePtr, &isNew), envPtr->extCmdMapPtr); envPtr->extCmdMapPtr = NULL; /* We've used up the CompileEnv. Mark as uninitialized. */ envPtr->iPtr = NULL; codePtr->localCachePtr = NULL; return codePtr; } ByteCode * TclInitByteCodeObj( Tcl_Obj *objPtr, /* Points object that should be initialized, * and whose string rep contains the source * code. */ const Tcl_ObjType *typePtr, CompileEnv *envPtr)/* Points to the CompileEnv structure from * which to create a ByteCode structure. */ { ByteCode *codePtr; PreventCycle(objPtr, envPtr); codePtr = TclInitByteCode(envPtr); /* * Free the old internal rep then convert the object to a bytecode object * by making its internal rep point to the just compiled ByteCode. */ ByteCodeSetIntRep(objPtr, typePtr, codePtr); return codePtr; } /* *---------------------------------------------------------------------- * * TclFindCompiledLocal -- * * This procedure is called at compile time to look up and optionally * allocate an entry ("slot") for a variable in a procedure's array of * local variables. If the variable's name is NULL, a new temporary * variable is always created. (Such temporary variables can only be * referenced using their slot index.) * * Results: * If create is 0 and the name is non-NULL, then if the variable is * found, the index of its entry in the procedure's array of local * variables is returned; otherwise -1 is returned. If name is NULL, the * index of a new temporary variable is returned. Finally, if create is 1 * and name is non-NULL, the index of a new entry is returned. * * Side effects: * Creates and registers a new local variable if create is 1 and the * variable is unknown, or if the name is NULL. * *---------------------------------------------------------------------- */ int TclFindCompiledLocal( const char *name, /* Points to first character of the name of a * scalar or array variable. If NULL, a * temporary var should be created. */ size_t nameBytes, /* Number of bytes in the name. */ int create, /* If 1, allocate a local frame entry for the * variable if it is new. */ CompileEnv *envPtr) /* Points to the current compile environment*/ { CompiledLocal *localPtr; int localVar = -1; int i; Proc *procPtr; /* * If not creating a temporary, does a local variable of the specified * name already exist? */ procPtr = envPtr->procPtr; if (procPtr == NULL) { /* * Compiling a non-body script: give it read access to the LVT in the * current localCache */ LocalCache *cachePtr = envPtr->iPtr->varFramePtr->localCachePtr; const char *localName; Tcl_Obj **varNamePtr; size_t len; if (!cachePtr || !name) { return -1; } varNamePtr = &cachePtr->varName0; for (i=0; i < cachePtr->numVars; varNamePtr++, i++) { if (*varNamePtr) { localName = TclGetStringFromObj(*varNamePtr, &len); if ((len == nameBytes) && !strncmp(name, localName, len)) { return i; } } } return -1; } if (name != NULL) { int localCt = procPtr->numCompiledLocals; localPtr = procPtr->firstLocalPtr; for (i = 0; i < localCt; i++) { if (!TclIsVarTemporary(localPtr)) { char *localName = localPtr->name; if ((nameBytes == localPtr->nameLength) && (strncmp(name,localName,nameBytes) == 0)) { return i; } } localPtr = localPtr->nextPtr; } } /* * Create a new variable if appropriate. */ if (create || (name == NULL)) { localVar = procPtr->numCompiledLocals; localPtr = (CompiledLocal *)Tcl_Alloc(offsetof(CompiledLocal, name) + nameBytes + 1); if (procPtr->firstLocalPtr == NULL) { procPtr->firstLocalPtr = procPtr->lastLocalPtr = localPtr; } else { procPtr->lastLocalPtr->nextPtr = localPtr; procPtr->lastLocalPtr = localPtr; } localPtr->nextPtr = NULL; localPtr->nameLength = nameBytes; localPtr->frameIndex = localVar; localPtr->flags = 0; if (name == NULL) { localPtr->flags |= VAR_TEMPORARY; } localPtr->defValuePtr = NULL; localPtr->resolveInfo = NULL; if (name != NULL) { memcpy(localPtr->name, name, nameBytes); } localPtr->name[nameBytes] = '\0'; procPtr->numCompiledLocals++; } return localVar; } /* *---------------------------------------------------------------------- * * TclExpandCodeArray -- * * Procedure that uses malloc to allocate more storage for a CompileEnv's * code array. * * Results: * None. * * Side effects: * The byte code array in *envPtr is reallocated to a new array of double * the size, and if envPtr->mallocedCodeArray is non-zero the old array * is freed. Byte codes are copied from the old array to the new one. * *---------------------------------------------------------------------- */ void TclExpandCodeArray( void *envArgPtr) /* Points to the CompileEnv whose code array * must be enlarged. */ { CompileEnv *envPtr = (CompileEnv *)envArgPtr; /* The CompileEnv containing the code array to * be doubled in size. */ /* * envPtr->codeNext is equal to envPtr->codeEnd. The currently defined * code bytes are stored between envPtr->codeStart and envPtr->codeNext-1 * [inclusive]. */ size_t currBytes = envPtr->codeNext - envPtr->codeStart; size_t newBytes = 2 * (envPtr->codeEnd - envPtr->codeStart); if (envPtr->mallocedCodeArray) { envPtr->codeStart = (unsigned char *)Tcl_Realloc(envPtr->codeStart, newBytes); } else { /* * envPtr->codeStart isn't a Tcl_Alloc'd pointer, so we must code a * Tcl_Realloc equivalent for ourselves. */ unsigned char *newPtr = (unsigned char *)Tcl_Alloc(newBytes); memcpy(newPtr, envPtr->codeStart, currBytes); envPtr->codeStart = newPtr; envPtr->mallocedCodeArray = 1; } envPtr->codeNext = envPtr->codeStart + currBytes; envPtr->codeEnd = envPtr->codeStart + newBytes; } /* *---------------------------------------------------------------------- * * EnterCmdStartData -- * * Registers the starting source and bytecode location of a command. This * information is used at runtime to map between instruction pc and * source locations. * * Results: * None. * * Side effects: * Inserts source and code location information into the compilation * environment envPtr for the command at index cmdIndex. The compilation * environment's CmdLocation array is grown if necessary. * *---------------------------------------------------------------------- */ static void EnterCmdStartData( CompileEnv *envPtr, /* Points to the compilation environment * structure in which to enter command * location information. */ int cmdIndex, /* Index of the command whose start data is * being set. */ int srcOffset, /* Offset of first char of the command. */ int codeOffset) /* Offset of first byte of command code. */ { CmdLocation *cmdLocPtr; if ((cmdIndex < 0) || (cmdIndex >= envPtr->numCommands)) { Tcl_Panic("EnterCmdStartData: bad command index %d", cmdIndex); } if (cmdIndex >= envPtr->cmdMapEnd) { /* * Expand the command location array by allocating more storage from * the heap. The currently allocated CmdLocation entries are stored * from cmdMapPtr[0] up to cmdMapPtr[envPtr->cmdMapEnd] (inclusive). */ size_t currElems = envPtr->cmdMapEnd; size_t newElems = 2 * currElems; size_t currBytes = currElems * sizeof(CmdLocation); size_t newBytes = newElems * sizeof(CmdLocation); if (envPtr->mallocedCmdMap) { envPtr->cmdMapPtr = (CmdLocation *)Tcl_Realloc(envPtr->cmdMapPtr, newBytes); } else { /* * envPtr->cmdMapPtr isn't a Tcl_Alloc'd pointer, so we must code a * Tcl_Realloc equivalent for ourselves. */ CmdLocation *newPtr = (CmdLocation *)Tcl_Alloc(newBytes); memcpy(newPtr, envPtr->cmdMapPtr, currBytes); envPtr->cmdMapPtr = newPtr; envPtr->mallocedCmdMap = 1; } envPtr->cmdMapEnd = newElems; } if (cmdIndex > 0) { if (codeOffset < envPtr->cmdMapPtr[cmdIndex-1].codeOffset) { Tcl_Panic("EnterCmdStartData: cmd map not sorted by code offset"); } } cmdLocPtr = &envPtr->cmdMapPtr[cmdIndex]; cmdLocPtr->codeOffset = codeOffset; cmdLocPtr->srcOffset = srcOffset; cmdLocPtr->numSrcBytes = -1; cmdLocPtr->numCodeBytes = -1; } /* *---------------------------------------------------------------------- * * EnterCmdExtentData -- * * Registers the source and bytecode length for a command. This * information is used at runtime to map between instruction pc and * source locations. * * Results: * None. * * Side effects: * Inserts source and code length information into the compilation * environment envPtr for the command at index cmdIndex. Starting source * and bytecode information for the command must already have been * registered. * *---------------------------------------------------------------------- */ static void EnterCmdExtentData( CompileEnv *envPtr, /* Points to the compilation environment * structure in which to enter command * location information. */ int cmdIndex, /* Index of the command whose source and code * length data is being set. */ int numSrcBytes, /* Number of command source chars. */ int numCodeBytes) /* Offset of last byte of command code. */ { CmdLocation *cmdLocPtr; if ((cmdIndex < 0) || (cmdIndex >= envPtr->numCommands)) { Tcl_Panic("EnterCmdExtentData: bad command index %d", cmdIndex); } if (cmdIndex > envPtr->cmdMapEnd) { Tcl_Panic("EnterCmdExtentData: missing start data for command %d", cmdIndex); } cmdLocPtr = &envPtr->cmdMapPtr[cmdIndex]; cmdLocPtr->numSrcBytes = numSrcBytes; cmdLocPtr->numCodeBytes = numCodeBytes; } /* *---------------------------------------------------------------------- * TIP #280 * * EnterCmdWordData -- * * Registers the lines for the words of a command. This information is * used at runtime by 'info frame'. * * Results: * None. * * Side effects: * Inserts word location information into the compilation environment * envPtr for the command at index cmdIndex. The compilation * environment's ExtCmdLoc.ECL array is grown if necessary. * *---------------------------------------------------------------------- */ static void EnterCmdWordData( ExtCmdLoc *eclPtr, /* Points to the map environment structure in * which to enter command location * information. */ int srcOffset, /* Offset of first char of the command. */ Tcl_Token *tokenPtr, const char *cmd, int numWords, int line, int *clNext, int **wlines, CompileEnv *envPtr) { ECL *ePtr; const char *last; int wordIdx, wordLine, *wwlines, *wordNext; if (eclPtr->nuloc >= eclPtr->nloc) { /* * Expand the ECL array by allocating more storage from the heap. The * currently allocated ECL entries are stored from eclPtr->loc[0] up * to eclPtr->loc[eclPtr->nuloc-1] (inclusive). */ size_t currElems = eclPtr->nloc; size_t newElems = (currElems ? 2*currElems : 1); size_t newBytes = newElems * sizeof(ECL); eclPtr->loc = (ECL *)Tcl_Realloc(eclPtr->loc, newBytes); eclPtr->nloc = newElems; } ePtr = &eclPtr->loc[eclPtr->nuloc]; ePtr->srcOffset = srcOffset; ePtr->line = (int *)Tcl_Alloc(numWords * sizeof(int)); ePtr->next = (int **)Tcl_Alloc(numWords * sizeof(int *)); ePtr->nline = numWords; wwlines = (int *)Tcl_Alloc(numWords * sizeof(int)); last = cmd; wordLine = line; wordNext = clNext; for (wordIdx=0 ; wordIdxnumComponents + 1) { TclAdvanceLines(&wordLine, last, tokenPtr->start); TclAdvanceContinuations(&wordLine, &wordNext, tokenPtr->start - envPtr->source); /* See Ticket 4b61afd660 */ wwlines[wordIdx] = ((wordIdx == 0) || TclWordKnownAtCompileTime(tokenPtr, NULL)) ? wordLine : -1; ePtr->line[wordIdx] = wordLine; ePtr->next[wordIdx] = wordNext; last = tokenPtr->start; } *wlines = wwlines; eclPtr->nuloc ++; } /* *---------------------------------------------------------------------- * * TclCreateExceptRange -- * * Procedure that allocates and initializes a new ExceptionRange * structure of the specified kind in a CompileEnv. * * Results: * Returns the index for the newly created ExceptionRange. * * Side effects: * If there is not enough room in the CompileEnv's ExceptionRange array, * the array in expanded: a new array of double the size is allocated, if * envPtr->mallocedExceptArray is non-zero the old array is freed, and * ExceptionRange entries are copied from the old array to the new one. * *---------------------------------------------------------------------- */ int TclCreateExceptRange( ExceptionRangeType type, /* The kind of ExceptionRange desired. */ CompileEnv *envPtr)/* Points to CompileEnv for which to create a * new ExceptionRange structure. */ { ExceptionRange *rangePtr; ExceptionAux *auxPtr; int index = envPtr->exceptArrayNext; if (index >= envPtr->exceptArrayEnd) { /* * Expand the ExceptionRange array. The currently allocated entries * are stored between elements 0 and (envPtr->exceptArrayNext - 1) * [inclusive]. */ size_t currBytes = envPtr->exceptArrayNext * sizeof(ExceptionRange); size_t currBytes2 = envPtr->exceptArrayNext * sizeof(ExceptionAux); int newElems = 2*envPtr->exceptArrayEnd; size_t newBytes = newElems * sizeof(ExceptionRange); size_t newBytes2 = newElems * sizeof(ExceptionAux); if (envPtr->mallocedExceptArray) { envPtr->exceptArrayPtr = (ExceptionRange *)Tcl_Realloc(envPtr->exceptArrayPtr, newBytes); envPtr->exceptAuxArrayPtr = (ExceptionAux *)Tcl_Realloc(envPtr->exceptAuxArrayPtr, newBytes2); } else { /* * envPtr->exceptArrayPtr isn't a Tcl_Alloc'd pointer, so we must * code a Tcl_Realloc equivalent for ourselves. */ ExceptionRange *newPtr = (ExceptionRange *)Tcl_Alloc(newBytes); ExceptionAux *newPtr2 = (ExceptionAux *)Tcl_Alloc(newBytes2); memcpy(newPtr, envPtr->exceptArrayPtr, currBytes); memcpy(newPtr2, envPtr->exceptAuxArrayPtr, currBytes2); envPtr->exceptArrayPtr = newPtr; envPtr->exceptAuxArrayPtr = newPtr2; envPtr->mallocedExceptArray = 1; } envPtr->exceptArrayEnd = newElems; } envPtr->exceptArrayNext++; rangePtr = &envPtr->exceptArrayPtr[index]; rangePtr->type = type; rangePtr->nestingLevel = envPtr->exceptDepth; rangePtr->codeOffset = -1; rangePtr->numCodeBytes = -1; rangePtr->breakOffset = -1; rangePtr->continueOffset = -1; rangePtr->catchOffset = -1; auxPtr = &envPtr->exceptAuxArrayPtr[index]; auxPtr->supportsContinue = 1; auxPtr->stackDepth = envPtr->currStackDepth; auxPtr->expandTarget = envPtr->expandCount; auxPtr->expandTargetDepth = -1; auxPtr->numBreakTargets = 0; auxPtr->breakTargets = NULL; auxPtr->allocBreakTargets = 0; auxPtr->numContinueTargets = 0; auxPtr->continueTargets = NULL; auxPtr->allocContinueTargets = 0; return index; } /* * --------------------------------------------------------------------- * * TclGetInnermostExceptionRange -- * * Returns the innermost exception range that covers the current code * creation point, and (optionally) the stack depth that is expected at * that point. Relies on the fact that the range has a numCodeBytes = -1 * when it is being populated and that inner ranges come after outer * ranges. * * --------------------------------------------------------------------- */ ExceptionRange * TclGetInnermostExceptionRange( CompileEnv *envPtr, int returnCode, ExceptionAux **auxPtrPtr) { int i = envPtr->exceptArrayNext; ExceptionRange *rangePtr = envPtr->exceptArrayPtr + i; while (i > 0) { rangePtr--; i--; if (CurrentOffset(envPtr) >= rangePtr->codeOffset && (rangePtr->numCodeBytes == -1 || CurrentOffset(envPtr) < rangePtr->codeOffset+rangePtr->numCodeBytes) && (returnCode != TCL_CONTINUE || envPtr->exceptAuxArrayPtr[i].supportsContinue)) { if (auxPtrPtr) { *auxPtrPtr = envPtr->exceptAuxArrayPtr + i; } return rangePtr; } } return NULL; } /* * --------------------------------------------------------------------- * * TclAddLoopBreakFixup, TclAddLoopContinueFixup -- * * Adds a place that wants to break/continue to the loop exception range * tracking that will be fixed up once the loop can be finalized. These * functions will generate an INST_JUMP4 that will be fixed up during the * loop finalization. * * --------------------------------------------------------------------- */ void TclAddLoopBreakFixup( CompileEnv *envPtr, ExceptionAux *auxPtr) { int range = auxPtr - envPtr->exceptAuxArrayPtr; if (envPtr->exceptArrayPtr[range].type != LOOP_EXCEPTION_RANGE) { Tcl_Panic("trying to add 'break' fixup to full exception range"); } if (++auxPtr->numBreakTargets > auxPtr->allocBreakTargets) { auxPtr->allocBreakTargets *= 2; auxPtr->allocBreakTargets += 2; if (auxPtr->breakTargets) { auxPtr->breakTargets = (unsigned int *)Tcl_Realloc(auxPtr->breakTargets, sizeof(int) * auxPtr->allocBreakTargets); } else { auxPtr->breakTargets = (unsigned int *)Tcl_Alloc(sizeof(int) * auxPtr->allocBreakTargets); } } auxPtr->breakTargets[auxPtr->numBreakTargets - 1] = CurrentOffset(envPtr); TclEmitInstInt4(INST_JUMP4, 0, envPtr); } void TclAddLoopContinueFixup( CompileEnv *envPtr, ExceptionAux *auxPtr) { int range = auxPtr - envPtr->exceptAuxArrayPtr; if (envPtr->exceptArrayPtr[range].type != LOOP_EXCEPTION_RANGE) { Tcl_Panic("trying to add 'continue' fixup to full exception range"); } if (++auxPtr->numContinueTargets > auxPtr->allocContinueTargets) { auxPtr->allocContinueTargets *= 2; auxPtr->allocContinueTargets += 2; if (auxPtr->continueTargets) { auxPtr->continueTargets = (unsigned int *)Tcl_Realloc(auxPtr->continueTargets, sizeof(int) * auxPtr->allocContinueTargets); } else { auxPtr->continueTargets = (unsigned int *)Tcl_Alloc(sizeof(int) * auxPtr->allocContinueTargets); } } auxPtr->continueTargets[auxPtr->numContinueTargets - 1] = CurrentOffset(envPtr); TclEmitInstInt4(INST_JUMP4, 0, envPtr); } /* * --------------------------------------------------------------------- * * TclCleanupStackForBreakContinue -- * * Ditch the extra elements from the auxiliary stack and the main stack. * How to do this exactly depends on whether there are any elements on * the auxiliary stack to pop. * * --------------------------------------------------------------------- */ void TclCleanupStackForBreakContinue( CompileEnv *envPtr, ExceptionAux *auxPtr) { int savedStackDepth = envPtr->currStackDepth; int toPop = envPtr->expandCount - auxPtr->expandTarget; if (toPop > 0) { while (toPop --> 0) { TclEmitOpcode(INST_EXPAND_DROP, envPtr); } TclAdjustStackDepth(auxPtr->expandTargetDepth - envPtr->currStackDepth, envPtr); envPtr->currStackDepth = auxPtr->expandTargetDepth; } toPop = envPtr->currStackDepth - auxPtr->stackDepth; while (toPop --> 0) { TclEmitOpcode(INST_POP, envPtr); } envPtr->currStackDepth = savedStackDepth; } /* * --------------------------------------------------------------------- * * StartExpanding -- * * Pushes an INST_EXPAND_START and does some additional housekeeping so * that the [break] and [continue] compilers can use an exception-free * issue to discard it. * * --------------------------------------------------------------------- */ static void StartExpanding( CompileEnv *envPtr) { int i; TclEmitOpcode(INST_EXPAND_START, envPtr); /* * Update inner exception ranges with information about the environment * where this expansion started. */ for (i=0 ; iexceptArrayNext ; i++) { ExceptionRange *rangePtr = &envPtr->exceptArrayPtr[i]; ExceptionAux *auxPtr = &envPtr->exceptAuxArrayPtr[i]; /* * Ignore loops unless they're still being built. */ if (rangePtr->codeOffset > CurrentOffset(envPtr)) { continue; } if (rangePtr->numCodeBytes != -1) { continue; } /* * Adequate condition: further out loops and further in exceptions * don't actually need this information. */ if (auxPtr->expandTarget == envPtr->expandCount) { auxPtr->expandTargetDepth = envPtr->currStackDepth; } } /* * There's now one more expansion being processed on the auxiliary stack. */ envPtr->expandCount++; } /* * --------------------------------------------------------------------- * * TclFinalizeLoopExceptionRange -- * * Finalizes a loop exception range, binding the registered [break] and * [continue] implementations so that they jump to the correct place. * Note that this must only be called after *all* the exception range * target offsets have been set. * * --------------------------------------------------------------------- */ void TclFinalizeLoopExceptionRange( CompileEnv *envPtr, int range) { ExceptionRange *rangePtr = &envPtr->exceptArrayPtr[range]; ExceptionAux *auxPtr = &envPtr->exceptAuxArrayPtr[range]; int i, offset; unsigned char *site; if (rangePtr->type != LOOP_EXCEPTION_RANGE) { Tcl_Panic("trying to finalize a loop exception range"); } /* * Do the jump fixups. Note that these are always issued as INST_JUMP4 so * there is no need to fuss around with updating code offsets. */ for (i=0 ; inumBreakTargets ; i++) { site = envPtr->codeStart + auxPtr->breakTargets[i]; offset = rangePtr->breakOffset - auxPtr->breakTargets[i]; TclUpdateInstInt4AtPc(INST_JUMP4, offset, site); } for (i=0 ; inumContinueTargets ; i++) { site = envPtr->codeStart + auxPtr->continueTargets[i]; if (rangePtr->continueOffset == -1) { int j; /* * WTF? Can't bind, so revert to an INST_CONTINUE. Not enough * space to do anything else. */ *site = INST_CONTINUE; for (j=0 ; j<4 ; j++) { *++site = INST_NOP; } } else { offset = rangePtr->continueOffset - auxPtr->continueTargets[i]; TclUpdateInstInt4AtPc(INST_JUMP4, offset, site); } } /* * Drop the arrays we were holding the only reference to. */ if (auxPtr->breakTargets) { Tcl_Free(auxPtr->breakTargets); auxPtr->breakTargets = NULL; auxPtr->numBreakTargets = 0; } if (auxPtr->continueTargets) { Tcl_Free(auxPtr->continueTargets); auxPtr->continueTargets = NULL; auxPtr->numContinueTargets = 0; } } /* *---------------------------------------------------------------------- * * TclCreateAuxData -- * * Procedure that allocates and initializes a new AuxData structure in a * CompileEnv's array of compilation auxiliary data records. These * AuxData records hold information created during compilation by * CompileProcs and used by instructions during execution. * * Results: * Returns the index for the newly created AuxData structure. * * Side effects: * If there is not enough room in the CompileEnv's AuxData array, the * AuxData array in expanded: a new array of double the size is * allocated, if envPtr->mallocedAuxDataArray is non-zero the old array * is freed, and AuxData entries are copied from the old array to the new * one. * *---------------------------------------------------------------------- */ int TclCreateAuxData( ClientData clientData, /* The compilation auxiliary data to store in * the new aux data record. */ const AuxDataType *typePtr, /* Pointer to the type to attach to this * AuxData */ CompileEnv *envPtr)/* Points to the CompileEnv for which a new * aux data structure is to be allocated. */ { int index; /* Index for the new AuxData structure. */ AuxData *auxDataPtr; /* Points to the new AuxData structure */ index = envPtr->auxDataArrayNext; if (index >= envPtr->auxDataArrayEnd) { /* * Expand the AuxData array. The currently allocated entries are * stored between elements 0 and (envPtr->auxDataArrayNext - 1) * [inclusive]. */ size_t currBytes = envPtr->auxDataArrayNext * sizeof(AuxData); int newElems = 2*envPtr->auxDataArrayEnd; size_t newBytes = newElems * sizeof(AuxData); if (envPtr->mallocedAuxDataArray) { envPtr->auxDataArrayPtr = (AuxData *)Tcl_Realloc(envPtr->auxDataArrayPtr, newBytes); } else { /* * envPtr->auxDataArrayPtr isn't a Tcl_Alloc'd pointer, so we must * code a Tcl_Realloc equivalent for ourselves. */ AuxData *newPtr = (AuxData *)Tcl_Alloc(newBytes); memcpy(newPtr, envPtr->auxDataArrayPtr, currBytes); envPtr->auxDataArrayPtr = newPtr; envPtr->mallocedAuxDataArray = 1; } envPtr->auxDataArrayEnd = newElems; } envPtr->auxDataArrayNext++; auxDataPtr = &envPtr->auxDataArrayPtr[index]; auxDataPtr->clientData = clientData; auxDataPtr->type = typePtr; return index; } /* *---------------------------------------------------------------------- * * TclInitJumpFixupArray -- * * Initializes a JumpFixupArray structure to hold some number of jump * fixup entries. * * Results: * None. * * Side effects: * The JumpFixupArray structure is initialized. * *---------------------------------------------------------------------- */ void TclInitJumpFixupArray( JumpFixupArray *fixupArrayPtr) /* Points to the JumpFixupArray structure to * initialize. */ { fixupArrayPtr->fixup = fixupArrayPtr->staticFixupSpace; fixupArrayPtr->next = 0; fixupArrayPtr->end = JUMPFIXUP_INIT_ENTRIES - 1; fixupArrayPtr->mallocedArray = 0; } /* *---------------------------------------------------------------------- * * TclExpandJumpFixupArray -- * * Procedure that uses malloc to allocate more storage for a jump fixup * array. * * Results: * None. * * Side effects: * The jump fixup array in *fixupArrayPtr is reallocated to a new array * of double the size, and if fixupArrayPtr->mallocedArray is non-zero * the old array is freed. Jump fixup structures are copied from the old * array to the new one. * *---------------------------------------------------------------------- */ void TclExpandJumpFixupArray( JumpFixupArray *fixupArrayPtr) /* Points to the JumpFixupArray structure to * enlarge. */ { /* * The currently allocated jump fixup entries are stored from fixup[0] up * to fixup[fixupArrayPtr->fixupNext] (*not* inclusive). We assume * fixupArrayPtr->fixupNext is equal to fixupArrayPtr->fixupEnd. */ size_t currBytes = fixupArrayPtr->next * sizeof(JumpFixup); int newElems = 2*(fixupArrayPtr->end + 1); size_t newBytes = newElems * sizeof(JumpFixup); if (fixupArrayPtr->mallocedArray) { fixupArrayPtr->fixup = (JumpFixup *)Tcl_Realloc(fixupArrayPtr->fixup, newBytes); } else { /* * fixupArrayPtr->fixup isn't a Tcl_Alloc'd pointer, so we must code a * Tcl_Realloc equivalent for ourselves. */ JumpFixup *newPtr = (JumpFixup *)Tcl_Alloc(newBytes); memcpy(newPtr, fixupArrayPtr->fixup, currBytes); fixupArrayPtr->fixup = newPtr; fixupArrayPtr->mallocedArray = 1; } fixupArrayPtr->end = newElems; } /* *---------------------------------------------------------------------- * * TclFreeJumpFixupArray -- * * Free any storage allocated in a jump fixup array structure. * * Results: * None. * * Side effects: * Allocated storage in the JumpFixupArray structure is freed. * *---------------------------------------------------------------------- */ void TclFreeJumpFixupArray( JumpFixupArray *fixupArrayPtr) /* Points to the JumpFixupArray structure to * free. */ { if (fixupArrayPtr->mallocedArray) { Tcl_Free(fixupArrayPtr->fixup); } } /* *---------------------------------------------------------------------- * * TclEmitForwardJump -- * * Procedure to emit a two-byte forward jump of kind "jumpType". Since * the jump may later have to be grown to five bytes if the jump target * is more than, say, 127 bytes away, this procedure also initializes a * JumpFixup record with information about the jump. * * Results: * None. * * Side effects: * The JumpFixup record pointed to by "jumpFixupPtr" is initialized with * information needed later if the jump is to be grown. Also, a two byte * jump of the designated type is emitted at the current point in the * bytecode stream. * *---------------------------------------------------------------------- */ void TclEmitForwardJump( CompileEnv *envPtr, /* Points to the CompileEnv structure that * holds the resulting instruction. */ TclJumpType jumpType, /* Indicates the kind of jump: if true or * false or unconditional. */ JumpFixup *jumpFixupPtr) /* Points to the JumpFixup structure to * initialize with information about this * forward jump. */ { /* * Initialize the JumpFixup structure: * - codeOffset is offset of first byte of jump below * - cmdIndex is index of the command after the current one * - exceptIndex is the index of the first ExceptionRange after the * current one. */ jumpFixupPtr->jumpType = jumpType; jumpFixupPtr->codeOffset = envPtr->codeNext - envPtr->codeStart; jumpFixupPtr->cmdIndex = envPtr->numCommands; jumpFixupPtr->exceptIndex = envPtr->exceptArrayNext; switch (jumpType) { case TCL_UNCONDITIONAL_JUMP: TclEmitInstInt1(INST_JUMP1, 0, envPtr); break; case TCL_TRUE_JUMP: TclEmitInstInt1(INST_JUMP_TRUE1, 0, envPtr); break; default: TclEmitInstInt1(INST_JUMP_FALSE1, 0, envPtr); break; } } /* *---------------------------------------------------------------------- * * TclFixupForwardJump -- * * Procedure that updates a previously-emitted forward jump to jump a * specified number of bytes, "jumpDist". If necessary, the jump is grown * from two to five bytes; this is done if the jump distance is greater * than "distThreshold" (normally 127 bytes). The jump is described by a * JumpFixup record previously initialized by TclEmitForwardJump. * * Results: * 1 if the jump was grown and subsequent instructions had to be moved; * otherwise 0. This result is returned to allow callers to update any * additional code offsets they may hold. * * Side effects: * The jump may be grown and subsequent instructions moved. If this * happens, the code offsets for any commands and any ExceptionRange * records between the jump and the current code address will be updated * to reflect the moved code. Also, the bytecode instruction array in the * CompileEnv structure may be grown and reallocated. * *---------------------------------------------------------------------- */ int TclFixupForwardJump( CompileEnv *envPtr, /* Points to the CompileEnv structure that * holds the resulting instruction. */ JumpFixup *jumpFixupPtr, /* Points to the JumpFixup structure that * describes the forward jump. */ int jumpDist, /* Jump distance to set in jump instr. */ int distThreshold) /* Maximum distance before the two byte jump * is grown to five bytes. */ { unsigned char *jumpPc, *p; int firstCmd, lastCmd, firstRange, lastRange, k; size_t numBytes; if (jumpDist <= distThreshold) { jumpPc = envPtr->codeStart + jumpFixupPtr->codeOffset; switch (jumpFixupPtr->jumpType) { case TCL_UNCONDITIONAL_JUMP: TclUpdateInstInt1AtPc(INST_JUMP1, jumpDist, jumpPc); break; case TCL_TRUE_JUMP: TclUpdateInstInt1AtPc(INST_JUMP_TRUE1, jumpDist, jumpPc); break; default: TclUpdateInstInt1AtPc(INST_JUMP_FALSE1, jumpDist, jumpPc); break; } return 0; } /* * We must grow the jump then move subsequent instructions down. Note that * if we expand the space for generated instructions, code addresses might * change; be careful about updating any of these addresses held in * variables. */ if ((envPtr->codeNext + 3) > envPtr->codeEnd) { TclExpandCodeArray(envPtr); } jumpPc = envPtr->codeStart + jumpFixupPtr->codeOffset; numBytes = envPtr->codeNext-jumpPc-2; p = jumpPc+2; memmove(p+3, p, numBytes); envPtr->codeNext += 3; jumpDist += 3; switch (jumpFixupPtr->jumpType) { case TCL_UNCONDITIONAL_JUMP: TclUpdateInstInt4AtPc(INST_JUMP4, jumpDist, jumpPc); break; case TCL_TRUE_JUMP: TclUpdateInstInt4AtPc(INST_JUMP_TRUE4, jumpDist, jumpPc); break; default: TclUpdateInstInt4AtPc(INST_JUMP_FALSE4, jumpDist, jumpPc); break; } /* * Adjust the code offsets for any commands and any ExceptionRange records * between the jump and the current code address. */ firstCmd = jumpFixupPtr->cmdIndex; lastCmd = envPtr->numCommands - 1; if (firstCmd < lastCmd) { for (k = firstCmd; k <= lastCmd; k++) { envPtr->cmdMapPtr[k].codeOffset += 3; } } firstRange = jumpFixupPtr->exceptIndex; lastRange = envPtr->exceptArrayNext - 1; for (k = firstRange; k <= lastRange; k++) { ExceptionRange *rangePtr = &envPtr->exceptArrayPtr[k]; rangePtr->codeOffset += 3; switch (rangePtr->type) { case LOOP_EXCEPTION_RANGE: rangePtr->breakOffset += 3; if (rangePtr->continueOffset != -1) { rangePtr->continueOffset += 3; } break; case CATCH_EXCEPTION_RANGE: rangePtr->catchOffset += 3; break; default: Tcl_Panic("TclFixupForwardJump: bad ExceptionRange type %d", rangePtr->type); } } for (k = 0 ; k < envPtr->exceptArrayNext ; k++) { ExceptionAux *auxPtr = &envPtr->exceptAuxArrayPtr[k]; int i; for (i=0 ; inumBreakTargets ; i++) { if (jumpFixupPtr->codeOffset < auxPtr->breakTargets[i]) { auxPtr->breakTargets[i] += 3; } } for (i=0 ; inumContinueTargets ; i++) { if (jumpFixupPtr->codeOffset < auxPtr->continueTargets[i]) { auxPtr->continueTargets[i] += 3; } } } return 1; /* the jump was grown */ } /* *---------------------------------------------------------------------- * * TclEmitInvoke -- * * Emit one of the invoke-related instructions, wrapping it if necessary * in code that ensures that any break or continue operation passing * through it gets the stack unwinding correct, converting it into an * internal jump if in an appropriate context. * * Results: * None * * Side effects: * Issues the jump with all correct stack management. May create another * loop exception range; pointers to ExceptionRange and ExceptionAux * structures should not be held across this call. * *---------------------------------------------------------------------- */ void TclEmitInvoke( CompileEnv *envPtr, int opcode, ...) { va_list argList; ExceptionRange *rangePtr; ExceptionAux *auxBreakPtr, *auxContinuePtr; int arg1, arg2, wordCount = 0, expandCount = 0; int loopRange = 0, breakRange = 0, continueRange = 0; int cleanup, depth = TclGetStackDepth(envPtr); /* * Parse the arguments. */ va_start(argList, opcode); switch (opcode) { case INST_INVOKE_STK1: wordCount = arg1 = cleanup = va_arg(argList, int); arg2 = 0; break; case INST_INVOKE_STK4: wordCount = arg1 = cleanup = va_arg(argList, int); arg2 = 0; break; case INST_INVOKE_REPLACE: arg1 = va_arg(argList, int); arg2 = va_arg(argList, int); wordCount = arg1 + arg2 - 1; cleanup = arg1 + 1; break; default: Tcl_Panic("unexpected opcode"); case INST_EVAL_STK: wordCount = cleanup = 1; arg1 = arg2 = 0; break; case INST_RETURN_STK: wordCount = cleanup = 2; arg1 = arg2 = 0; break; case INST_INVOKE_EXPANDED: wordCount = arg1 = cleanup = va_arg(argList, int); arg2 = 0; expandCount = 1; break; } va_end(argList); /* * Determine if we need to handle break and continue exceptions with a * special handling exception range (so that we can correctly unwind the * stack). * * These must be done separately; they can be different (especially for * calls from inside a [for] increment clause). */ rangePtr = TclGetInnermostExceptionRange(envPtr, TCL_CONTINUE, &auxContinuePtr); if (rangePtr == NULL || rangePtr->type != LOOP_EXCEPTION_RANGE) { auxContinuePtr = NULL; } else if (auxContinuePtr->stackDepth == envPtr->currStackDepth-wordCount && auxContinuePtr->expandTarget == envPtr->expandCount-expandCount) { auxContinuePtr = NULL; } else { continueRange = auxContinuePtr - envPtr->exceptAuxArrayPtr; } rangePtr = TclGetInnermostExceptionRange(envPtr, TCL_BREAK, &auxBreakPtr); if (rangePtr == NULL || rangePtr->type != LOOP_EXCEPTION_RANGE) { auxBreakPtr = NULL; } else if (auxContinuePtr == NULL && auxBreakPtr->stackDepth == envPtr->currStackDepth-wordCount && auxBreakPtr->expandTarget == envPtr->expandCount-expandCount) { auxBreakPtr = NULL; } else { breakRange = auxBreakPtr - envPtr->exceptAuxArrayPtr; } if (auxBreakPtr != NULL || auxContinuePtr != NULL) { loopRange = TclCreateExceptRange(LOOP_EXCEPTION_RANGE, envPtr); ExceptionRangeStarts(envPtr, loopRange); } /* * Issue the invoke itself. */ switch (opcode) { case INST_INVOKE_STK1: TclEmitInstInt1(INST_INVOKE_STK1, arg1, envPtr); break; case INST_INVOKE_STK4: TclEmitInstInt4(INST_INVOKE_STK4, arg1, envPtr); break; case INST_INVOKE_EXPANDED: TclEmitOpcode(INST_INVOKE_EXPANDED, envPtr); envPtr->expandCount--; TclAdjustStackDepth(1 - arg1, envPtr); break; case INST_EVAL_STK: TclEmitOpcode(INST_EVAL_STK, envPtr); break; case INST_RETURN_STK: TclEmitOpcode(INST_RETURN_STK, envPtr); break; case INST_INVOKE_REPLACE: TclEmitInstInt4(INST_INVOKE_REPLACE, arg1, envPtr); TclEmitInt1(arg2, envPtr); TclAdjustStackDepth(-1, envPtr); /* Correction to stack depth calcs */ break; } /* * If we're generating a special wrapper exception range, we need to * finish that up now. */ if (auxBreakPtr != NULL || auxContinuePtr != NULL) { int savedStackDepth = envPtr->currStackDepth; int savedExpandCount = envPtr->expandCount; JumpFixup nonTrapFixup; if (auxBreakPtr != NULL) { auxBreakPtr = envPtr->exceptAuxArrayPtr + breakRange; } if (auxContinuePtr != NULL) { auxContinuePtr = envPtr->exceptAuxArrayPtr + continueRange; } ExceptionRangeEnds(envPtr, loopRange); TclEmitForwardJump(envPtr, TCL_UNCONDITIONAL_JUMP, &nonTrapFixup); /* * Careful! When generating these stack unwinding sequences, the depth * of stack in the cases where they are taken is not the same as if * the exception is not taken. */ if (auxBreakPtr != NULL) { TclAdjustStackDepth(-1, envPtr); ExceptionRangeTarget(envPtr, loopRange, breakOffset); TclCleanupStackForBreakContinue(envPtr, auxBreakPtr); TclAddLoopBreakFixup(envPtr, auxBreakPtr); TclAdjustStackDepth(1, envPtr); envPtr->currStackDepth = savedStackDepth; envPtr->expandCount = savedExpandCount; } if (auxContinuePtr != NULL) { TclAdjustStackDepth(-1, envPtr); ExceptionRangeTarget(envPtr, loopRange, continueOffset); TclCleanupStackForBreakContinue(envPtr, auxContinuePtr); TclAddLoopContinueFixup(envPtr, auxContinuePtr); TclAdjustStackDepth(1, envPtr); envPtr->currStackDepth = savedStackDepth; envPtr->expandCount = savedExpandCount; } TclFinalizeLoopExceptionRange(envPtr, loopRange); TclFixupForwardJumpToHere(envPtr, &nonTrapFixup, 127); } TclCheckStackDepth(depth+1-cleanup, envPtr); } /* *---------------------------------------------------------------------- * * TclGetInstructionTable -- * * Returns a pointer to the table describing Tcl bytecode instructions. * This procedure is defined so that clients can access the pointer from * outside the TCL DLLs. * * Results: * Returns a pointer to the global instruction table, same as the * expression (&tclInstructionTable[0]). * * Side effects: * None. * *---------------------------------------------------------------------- */ const void * /* == InstructionDesc* == */ TclGetInstructionTable(void) { return &tclInstructionTable[0]; } /* *---------------------------------------------------------------------- * * GetCmdLocEncodingSize -- * * Computes the total number of bytes needed to encode the command * location information for some compiled code. * * Results: * The byte count needed to encode the compiled location information. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int GetCmdLocEncodingSize( CompileEnv *envPtr) /* Points to compilation environment structure * containing the CmdLocation structure to * encode. */ { CmdLocation *mapPtr = envPtr->cmdMapPtr; int numCmds = envPtr->numCommands; int codeDelta, codeLen, srcDelta, srcLen; int codeDeltaNext, codeLengthNext, srcDeltaNext, srcLengthNext; /* The offsets in their respective byte * sequences where the next encoded offset or * length should go. */ int prevCodeOffset, prevSrcOffset, i; codeDeltaNext = codeLengthNext = srcDeltaNext = srcLengthNext = 0; prevCodeOffset = prevSrcOffset = 0; for (i = 0; i < numCmds; i++) { codeDelta = mapPtr[i].codeOffset - prevCodeOffset; if (codeDelta < 0) { Tcl_Panic("GetCmdLocEncodingSize: bad code offset"); } else if (codeDelta <= 127) { codeDeltaNext++; } else { codeDeltaNext += 5; /* 1 byte for 0xFF, 4 for positive delta */ } prevCodeOffset = mapPtr[i].codeOffset; codeLen = mapPtr[i].numCodeBytes; if (codeLen < 0) { Tcl_Panic("GetCmdLocEncodingSize: bad code length"); } else if (codeLen <= 127) { codeLengthNext++; } else { codeLengthNext += 5;/* 1 byte for 0xFF, 4 for length */ } srcDelta = mapPtr[i].srcOffset - prevSrcOffset; if ((-127 <= srcDelta) && (srcDelta <= 127) && (srcDelta != -1)) { srcDeltaNext++; } else { srcDeltaNext += 5; /* 1 byte for 0xFF, 4 for delta */ } prevSrcOffset = mapPtr[i].srcOffset; srcLen = mapPtr[i].numSrcBytes; if (srcLen < 0) { Tcl_Panic("GetCmdLocEncodingSize: bad source length"); } else if (srcLen <= 127) { srcLengthNext++; } else { srcLengthNext += 5; /* 1 byte for 0xFF, 4 for length */ } } return (codeDeltaNext + codeLengthNext + srcDeltaNext + srcLengthNext); } /* *---------------------------------------------------------------------- * * EncodeCmdLocMap -- * * Encode the command location information for some compiled code into a * ByteCode structure. The encoded command location map is stored as * three adjacent byte sequences. * * Results: * Pointer to the first byte after the encoded command location * information. * * Side effects: * The encoded information is stored into the block of memory headed by * codePtr. Also records pointers to the start of the four byte sequences * in fields in codePtr's ByteCode header structure. * *---------------------------------------------------------------------- */ static unsigned char * EncodeCmdLocMap( CompileEnv *envPtr, /* Points to compilation environment structure * containing the CmdLocation structure to * encode. */ ByteCode *codePtr, /* ByteCode in which to encode envPtr's * command location information. */ unsigned char *startPtr) /* Points to the first byte in codePtr's * memory block where the location information * is to be stored. */ { CmdLocation *mapPtr = envPtr->cmdMapPtr; int numCmds = envPtr->numCommands; unsigned char *p = startPtr; int codeDelta, codeLen, srcDelta, srcLen, prevOffset; int i; /* * Encode the code offset for each command as a sequence of deltas. */ codePtr->codeDeltaStart = p; prevOffset = 0; for (i = 0; i < numCmds; i++) { codeDelta = mapPtr[i].codeOffset - prevOffset; if (codeDelta < 0) { Tcl_Panic("EncodeCmdLocMap: bad code offset"); } else if (codeDelta <= 127) { TclStoreInt1AtPtr(codeDelta, p); p++; } else { TclStoreInt1AtPtr(0xFF, p); p++; TclStoreInt4AtPtr(codeDelta, p); p += 4; } prevOffset = mapPtr[i].codeOffset; } /* * Encode the code length for each command. */ codePtr->codeLengthStart = p; for (i = 0; i < numCmds; i++) { codeLen = mapPtr[i].numCodeBytes; if (codeLen < 0) { Tcl_Panic("EncodeCmdLocMap: bad code length"); } else if (codeLen <= 127) { TclStoreInt1AtPtr(codeLen, p); p++; } else { TclStoreInt1AtPtr(0xFF, p); p++; TclStoreInt4AtPtr(codeLen, p); p += 4; } } /* * Encode the source offset for each command as a sequence of deltas. */ codePtr->srcDeltaStart = p; prevOffset = 0; for (i = 0; i < numCmds; i++) { srcDelta = mapPtr[i].srcOffset - prevOffset; if ((-127 <= srcDelta) && (srcDelta <= 127) && (srcDelta != -1)) { TclStoreInt1AtPtr(srcDelta, p); p++; } else { TclStoreInt1AtPtr(0xFF, p); p++; TclStoreInt4AtPtr(srcDelta, p); p += 4; } prevOffset = mapPtr[i].srcOffset; } /* * Encode the source length for each command. */ codePtr->srcLengthStart = p; for (i = 0; i < numCmds; i++) { srcLen = mapPtr[i].numSrcBytes; if (srcLen < 0) { Tcl_Panic("EncodeCmdLocMap: bad source length"); } else if (srcLen <= 127) { TclStoreInt1AtPtr(srcLen, p); p++; } else { TclStoreInt1AtPtr(0xFF, p); p++; TclStoreInt4AtPtr(srcLen, p); p += 4; } } return p; } #ifdef TCL_COMPILE_STATS /* *---------------------------------------------------------------------- * * RecordByteCodeStats -- * * Accumulates various compilation-related statistics for each newly * compiled ByteCode. Called by the TclInitByteCodeObj when Tcl is * compiled with the -DTCL_COMPILE_STATS flag * * Results: * None. * * Side effects: * Accumulates aggregate code-related statistics in the interpreter's * ByteCodeStats structure. Records statistics specific to a ByteCode in * its ByteCode structure. * *---------------------------------------------------------------------- */ void RecordByteCodeStats( ByteCode *codePtr) /* Points to ByteCode structure with info * to add to accumulated statistics. */ { Interp *iPtr = (Interp *) *codePtr->interpHandle; ByteCodeStats *statsPtr; if (iPtr == NULL) { /* Avoid segfaulting in case we're called in a deleted interp */ return; } statsPtr = &(iPtr->stats); statsPtr->numCompilations++; statsPtr->totalSrcBytes += (double) codePtr->numSrcBytes; statsPtr->totalByteCodeBytes += (double) codePtr->structureSize; statsPtr->currentSrcBytes += (double) codePtr->numSrcBytes; statsPtr->currentByteCodeBytes += (double) codePtr->structureSize; statsPtr->srcCount[TclLog2(codePtr->numSrcBytes)]++; statsPtr->byteCodeCount[TclLog2((int) codePtr->structureSize)]++; statsPtr->currentInstBytes += (double) codePtr->numCodeBytes; statsPtr->currentLitBytes += (double) codePtr->numLitObjects * sizeof(Tcl_Obj *); statsPtr->currentExceptBytes += (double) codePtr->numExceptRanges * sizeof(ExceptionRange); statsPtr->currentAuxBytes += (double) codePtr->numAuxDataItems * sizeof(AuxData); statsPtr->currentCmdMapBytes += (double) codePtr->numCmdLocBytes; } #endif /* TCL_COMPILE_STATS */ /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * tab-width: 8 * End: */