/* * tclEncoding.c -- * * Contains the implementation of the encoding conversion package. * * Copyright (c) 1996-1998 Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution * of this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tclEncoding.c,v 1.16.2.7 2005/07/05 21:18:23 dgp Exp $ */ #include "tclInt.h" #include "tclPort.h" typedef size_t (LengthProc)_ANSI_ARGS_((CONST char *src)); /* * The following data structure represents an encoding, which describes how * to convert between various character sets and UTF-8. */ typedef struct Encoding { char *name; /* Name of encoding. Malloced because (1) * hash table entry that owns this encoding * may be freed prior to this encoding being * freed, (2) string passed in the * Tcl_EncodingType structure may not be * persistent. */ Tcl_EncodingConvertProc *toUtfProc; /* Procedure to convert from external * encoding into UTF-8. */ Tcl_EncodingConvertProc *fromUtfProc; /* Procedure to convert from UTF-8 into * external encoding. */ Tcl_EncodingFreeProc *freeProc; /* If non-NULL, procedure to call when this * encoding is deleted. */ int nullSize; /* Number of 0x00 bytes that signify * end-of-string in this encoding. This * number is used to determine the source * string length when the srcLen argument is * negative. This number can be 1 or 2. */ ClientData clientData; /* Arbitrary value associated with encoding * type. Passed to conversion procedures. */ LengthProc *lengthProc; /* Function to compute length of * null-terminated strings in this encoding. * If nullSize is 1, this is strlen; if * nullSize is 2, this is a function that * returns the number of bytes in a 0x0000 * terminated string. */ int refCount; /* Number of uses of this structure. */ Tcl_HashEntry *hPtr; /* Hash table entry that owns this encoding. */ } Encoding; /* * The following structure is the clientData for a dynamically-loaded, * table-driven encoding created by LoadTableEncoding(). It maps between * Unicode and a single-byte, double-byte, or multibyte (1 or 2 bytes only) * encoding. */ typedef struct TableEncodingData { int fallback; /* Character (in this encoding) to * substitute when this encoding cannot * represent a UTF-8 character. */ char prefixBytes[256]; /* If a byte in the input stream is a lead * byte for a 2-byte sequence, the * corresponding entry in this array is 1, * otherwise it is 0. */ unsigned short **toUnicode; /* Two dimensional sparse matrix to map * characters from the encoding to Unicode. * Each element of the toUnicode array points * to an array of 256 shorts. If there is no * corresponding character in Unicode, the * value in the matrix is 0x0000. malloc'd. */ unsigned short **fromUnicode; /* Two dimensional sparse matrix to map * characters from Unicode to the encoding. * Each element of the fromUnicode array * points to an array of 256 shorts. If there * is no corresponding character the encoding, * the value in the matrix is 0x0000. * malloc'd. */ } TableEncodingData; /* * The following structures is the clientData for a dynamically-loaded, * escape-driven encoding that is itself comprised of other simpler * encodings. An example is "iso-2022-jp", which uses escape sequences to * switch between ascii, jis0208, jis0212, gb2312, and ksc5601. Note that * "escape-driven" does not necessarily mean that the ESCAPE character is * the character used for switching character sets. */ typedef struct EscapeSubTable { unsigned int sequenceLen; /* Length of following string. */ char sequence[16]; /* Escape code that marks this encoding. */ char name[32]; /* Name for encoding. */ Encoding *encodingPtr; /* Encoding loaded using above name, or NULL * if this sub-encoding has not been needed * yet. */ } EscapeSubTable; typedef struct EscapeEncodingData { int fallback; /* Character (in this encoding) to * substitute when this encoding cannot * represent a UTF-8 character. */ unsigned int initLen; /* Length of following string. */ char init[16]; /* String to emit or expect before first char * in conversion. */ unsigned int finalLen; /* Length of following string. */ char final[16]; /* String to emit or expect after last char * in conversion. */ char prefixBytes[256]; /* If a byte in the input stream is the * first character of one of the escape * sequences in the following array, the * corresponding entry in this array is 1, * otherwise it is 0. */ int numSubTables; /* Length of following array. */ EscapeSubTable subTables[1];/* Information about each EscapeSubTable * used by this encoding type. The actual * size will be as large as necessary to * hold all EscapeSubTables. */ } EscapeEncodingData; /* * Constants used when loading an encoding file to identify the type of the * file. */ #define ENCODING_SINGLEBYTE 0 #define ENCODING_DOUBLEBYTE 1 #define ENCODING_MULTIBYTE 2 #define ENCODING_ESCAPE 3 /* * Initialize the default encoding directory. If this variable contains * a non NULL value, it will be the first path used to locate the * system encoding files. */ char *tclDefaultEncodingDir = NULL; static int encodingsInitialized = 0; /* * Hash table that keeps track of all loaded Encodings. Keys are * the string names that represent the encoding, values are (Encoding *). */ static Tcl_HashTable encodingTable; TCL_DECLARE_MUTEX(encodingMutex) /* * The following are used to hold the default and current system encodings. * If NULL is passed to one of the conversion routines, the current setting * of the system encoding will be used to perform the conversion. */ static Tcl_Encoding defaultEncoding; static Tcl_Encoding systemEncoding; /* * The following variable is used in the sparse matrix code for a * TableEncoding to represent a page in the table that has no entries. */ static unsigned short emptyPage[256]; /* * Procedures used only in this module. */ static int BinaryProc _ANSI_ARGS_((ClientData clientData, CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, int *dstCharsPtr)); static void DupEncodingIntRep _ANSI_ARGS_((Tcl_Obj *srcPtr, Tcl_Obj *dupPtr)); static void EscapeFreeProc _ANSI_ARGS_((ClientData clientData)); static int EscapeFromUtfProc _ANSI_ARGS_((ClientData clientData, CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, int *dstCharsPtr)); static int EscapeToUtfProc _ANSI_ARGS_((ClientData clientData, CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, int *dstCharsPtr)); static void FreeEncoding _ANSI_ARGS_((Tcl_Encoding encoding)); static void FreeEncodingIntRep _ANSI_ARGS_((Tcl_Obj *objPtr)); static Encoding * GetTableEncoding _ANSI_ARGS_(( EscapeEncodingData *dataPtr, int state)); static Tcl_Encoding LoadEncodingFile _ANSI_ARGS_((Tcl_Interp *interp, CONST char *name)); static Tcl_Encoding LoadTableEncoding _ANSI_ARGS_((Tcl_Interp *interp, CONST char *name, int type, Tcl_Channel chan)); static Tcl_Encoding LoadEscapeEncoding _ANSI_ARGS_((CONST char *name, Tcl_Channel chan)); static Tcl_Channel OpenEncodingFile _ANSI_ARGS_((CONST char *dir, CONST char *name)); static void TableFreeProc _ANSI_ARGS_((ClientData clientData)); static int TableFromUtfProc _ANSI_ARGS_((ClientData clientData, CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, int *dstCharsPtr)); static int TableToUtfProc _ANSI_ARGS_((ClientData clientData, CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, int *dstCharsPtr)); static size_t unilen _ANSI_ARGS_((CONST char *src)); static int UnicodeToUtfProc _ANSI_ARGS_((ClientData clientData, CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, int *dstCharsPtr)); static int UtfToUnicodeProc _ANSI_ARGS_((ClientData clientData, CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, int *dstCharsPtr)); static int UtfToUtfProc _ANSI_ARGS_((ClientData clientData, CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, int *dstCharsPtr, int pureNullMode)); static int UtfIntToUtfExtProc _ANSI_ARGS_((ClientData clientData, CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, int *dstCharsPtr)); static int UtfExtToUtfIntProc _ANSI_ARGS_((ClientData clientData, CONST char *src, int srcLen, int flags, Tcl_EncodingState *statePtr, char *dst, int dstLen, int *srcReadPtr, int *dstWrotePtr, int *dstCharsPtr)); static int TclFindEncodings _ANSI_ARGS_((CONST char *argv0)); /* * A Tcl_ObjType for holding a cached Tcl_Encoding as the intrep. * This should help the lifetime of encodings be more useful. * See concerns raised in [Bug 1077262]. */ static Tcl_ObjType EncodingType = { "encoding", FreeEncodingIntRep, DupEncodingIntRep, NULL, NULL }; /* *---------------------------------------------------------------------- * * TclGetEncodingFromObj -- * * Writes to (*encodingPtr) the Tcl_Encoding value of (*objPtr), * if possible, and returns TCL_OK. If no such encoding exists, * TCL_ERROR is returned, and if interp is non-NULL, an error message * is written there. * * Results: * Standard Tcl return code. * * Side effects: * Caches the Tcl_Encoding value as the internal rep of (*objPtr). * *---------------------------------------------------------------------- */ int TclGetEncodingFromObj(interp, objPtr, encodingPtr) Tcl_Interp *interp; Tcl_Obj *objPtr; Tcl_Encoding *encodingPtr; { CONST char *name = Tcl_GetString(objPtr); if (objPtr->typePtr != &EncodingType) { Tcl_Encoding encoding = Tcl_GetEncoding(interp, name); if (encoding == NULL) { return TCL_ERROR; } if (objPtr->typePtr && objPtr->typePtr->freeIntRepProc) { objPtr->typePtr->freeIntRepProc(objPtr); } objPtr->internalRep.otherValuePtr = (VOID *) encoding; objPtr->typePtr = &EncodingType; } *encodingPtr = Tcl_GetEncoding(NULL, name); return TCL_OK; } /* *---------------------------------------------------------------------- * * FreeEncodingIntRep -- * * The Tcl_FreeInternalRepProc for the "encoding" Tcl_ObjType. * *---------------------------------------------------------------------- */ static void FreeEncodingIntRep(objPtr) Tcl_Obj *objPtr; { Tcl_FreeEncoding((Tcl_Encoding) objPtr->internalRep.otherValuePtr); } /* *---------------------------------------------------------------------- * * DupEncodingIntRep -- * * The Tcl_DupInternalRepProc for the "encoding" Tcl_ObjType. * *---------------------------------------------------------------------- */ static void DupEncodingIntRep(srcPtr, dupPtr) Tcl_Obj *srcPtr; Tcl_Obj *dupPtr; { dupPtr->internalRep.otherValuePtr = (VOID *) Tcl_GetEncoding(NULL, srcPtr->bytes); } /* *--------------------------------------------------------------------------- * * TclInitEncodingSubsystem -- * * Initialize all resources used by this subsystem on a per-process * basis. * * Results: * None. * * Side effects: * Depends on the memory, object, and IO subsystems. * *--------------------------------------------------------------------------- */ void TclInitEncodingSubsystem() { Tcl_EncodingType type; Tcl_MutexLock(&encodingMutex); Tcl_InitHashTable(&encodingTable, TCL_STRING_KEYS); Tcl_MutexUnlock(&encodingMutex); /* * Create a few initial encodings. Note that the UTF-8 to UTF-8 * translation is not a no-op, because it will turn a stream of * improperly formed UTF-8 into a properly formed stream. */ type.encodingName = "identity"; type.toUtfProc = BinaryProc; type.fromUtfProc = BinaryProc; type.freeProc = NULL; type.nullSize = 1; type.clientData = NULL; defaultEncoding = Tcl_CreateEncoding(&type); systemEncoding = Tcl_GetEncoding(NULL, type.encodingName); type.encodingName = "utf-8"; type.toUtfProc = UtfExtToUtfIntProc; type.fromUtfProc = UtfIntToUtfExtProc; type.freeProc = NULL; type.nullSize = 1; type.clientData = NULL; Tcl_CreateEncoding(&type); type.encodingName = "unicode"; type.toUtfProc = UnicodeToUtfProc; type.fromUtfProc = UtfToUnicodeProc; type.freeProc = NULL; type.nullSize = 2; type.clientData = NULL; Tcl_CreateEncoding(&type); } /* *---------------------------------------------------------------------- * * TclFinalizeEncodingSubsystem -- * * Release the state associated with the encoding subsystem. * * Results: * None. * * Side effects: * Frees all of the encodings. * *---------------------------------------------------------------------- */ void TclFinalizeEncodingSubsystem() { Tcl_HashSearch search; Tcl_HashEntry *hPtr; Tcl_MutexLock(&encodingMutex); encodingsInitialized = 0; FreeEncoding(systemEncoding); hPtr = Tcl_FirstHashEntry(&encodingTable, &search); while (hPtr != NULL) { /* * Call FreeEncoding instead of doing it directly to handle refcounts * like escape encodings use. [Bug #524674] * Make sure to call Tcl_FirstHashEntry repeatedly so that all * encodings are eventually cleaned up. */ FreeEncoding((Tcl_Encoding) Tcl_GetHashValue(hPtr)); hPtr = Tcl_FirstHashEntry(&encodingTable, &search); } Tcl_DeleteHashTable(&encodingTable); Tcl_MutexUnlock(&encodingMutex); } /* *------------------------------------------------------------------------- * * Tcl_GetDefaultEncodingDir -- * * * Results: * * Side effects: * *------------------------------------------------------------------------- */ CONST char * Tcl_GetDefaultEncodingDir() { return tclDefaultEncodingDir; } /* *------------------------------------------------------------------------- * * Tcl_SetDefaultEncodingDir -- * * * Results: * * Side effects: * *------------------------------------------------------------------------- */ void Tcl_SetDefaultEncodingDir(path) CONST char *path; { tclDefaultEncodingDir = (char *)ckalloc((unsigned) strlen(path) + 1); strcpy(tclDefaultEncodingDir, path); } /* *------------------------------------------------------------------------- * * Tcl_GetEncoding -- * * Given the name of a encoding, find the corresponding Tcl_Encoding * token. If the encoding did not already exist, Tcl attempts to * dynamically load an encoding by that name. * * Results: * Returns a token that represents the encoding. If the name didn't * refer to any known or loadable encoding, NULL is returned. If * NULL was returned, an error message is left in interp's result * object, unless interp was NULL. * * Side effects: * The new encoding type is entered into a table visible to all * interpreters, keyed off the encoding's name. For each call to * this procedure, there should eventually be a call to * Tcl_FreeEncoding, so that the database can be cleaned up when * encodings aren't needed anymore. * *------------------------------------------------------------------------- */ Tcl_Encoding Tcl_GetEncoding(interp, name) Tcl_Interp *interp; /* Interp for error reporting, if not NULL. */ CONST char *name; /* The name of the desired encoding. */ { Tcl_HashEntry *hPtr; Encoding *encodingPtr; Tcl_MutexLock(&encodingMutex); if (name == NULL) { encodingPtr = (Encoding *) systemEncoding; encodingPtr->refCount++; Tcl_MutexUnlock(&encodingMutex); return systemEncoding; } hPtr = Tcl_FindHashEntry(&encodingTable, name); if (hPtr != NULL) { encodingPtr = (Encoding *) Tcl_GetHashValue(hPtr); encodingPtr->refCount++; Tcl_MutexUnlock(&encodingMutex); return (Tcl_Encoding) encodingPtr; } Tcl_MutexUnlock(&encodingMutex); return LoadEncodingFile(interp, name); } /* *--------------------------------------------------------------------------- * * Tcl_FreeEncoding -- * * This procedure is called to release an encoding allocated by * Tcl_CreateEncoding() or Tcl_GetEncoding(). * * Results: * None. * * Side effects: * The reference count associated with the encoding is decremented * and the encoding may be deleted if nothing is using it anymore. * *--------------------------------------------------------------------------- */ void Tcl_FreeEncoding(encoding) Tcl_Encoding encoding; { Tcl_MutexLock(&encodingMutex); FreeEncoding(encoding); Tcl_MutexUnlock(&encodingMutex); } /* *---------------------------------------------------------------------- * * FreeEncoding -- * * This procedure is called to release an encoding by procedures * that already have the encodingMutex. * * Results: * None. * * Side effects: * The reference count associated with the encoding is decremented * and the encoding may be deleted if nothing is using it anymore. * *---------------------------------------------------------------------- */ static void FreeEncoding(encoding) Tcl_Encoding encoding; { Encoding *encodingPtr; encodingPtr = (Encoding *) encoding; if (encodingPtr == NULL) { return; } encodingPtr->refCount--; if (encodingPtr->refCount == 0) { if (encodingPtr->freeProc != NULL) { (*encodingPtr->freeProc)(encodingPtr->clientData); } if (encodingPtr->hPtr != NULL) { Tcl_DeleteHashEntry(encodingPtr->hPtr); } ckfree((char *) encodingPtr->name); ckfree((char *) encodingPtr); } } /* *------------------------------------------------------------------------- * * Tcl_GetEncodingName -- * * Given an encoding, return the name that was used to constuct * the encoding. * * Results: * The name of the encoding. * * Side effects: * None. * *--------------------------------------------------------------------------- */ CONST char * Tcl_GetEncodingName(encoding) Tcl_Encoding encoding; /* The encoding whose name to fetch. */ { Encoding *encodingPtr; if (encoding == NULL) { encoding = systemEncoding; } encodingPtr = (Encoding *) encoding; return encodingPtr->name; } /* *------------------------------------------------------------------------- * * Tcl_GetEncodingNames -- * * Get the list of all known encodings, including the ones stored * as files on disk in the encoding path. * * Results: * Modifies interp's result object to hold a list of all the available * encodings. * * Side effects: * None. * *------------------------------------------------------------------------- */ void Tcl_GetEncodingNames(interp) Tcl_Interp *interp; /* Interp to hold result. */ { Tcl_HashSearch search; Tcl_HashEntry *hPtr; Tcl_Obj *pathPtr, *resultPtr; int dummy; Tcl_HashTable table; Tcl_MutexLock(&encodingMutex); Tcl_InitHashTable(&table, TCL_STRING_KEYS); hPtr = Tcl_FirstHashEntry(&encodingTable, &search); while (hPtr != NULL) { Encoding *encodingPtr; encodingPtr = (Encoding *) Tcl_GetHashValue(hPtr); Tcl_CreateHashEntry(&table, encodingPtr->name, &dummy); hPtr = Tcl_NextHashEntry(&search); } Tcl_MutexUnlock(&encodingMutex); pathPtr = TclGetLibraryPath(); if (pathPtr != NULL) { int i, objc; Tcl_Obj **objv; char globArgString[10]; Tcl_Obj* encodingObj = Tcl_NewStringObj("encoding",-1); Tcl_IncrRefCount(encodingObj); objc = 0; Tcl_ListObjGetElements(NULL, pathPtr, &objc, &objv); for (i = 0; i < objc; i++) { Tcl_Obj *searchIn; /* * Construct the path from the element of pathPtr, * joined with 'encoding'. */ searchIn = Tcl_FSJoinToPath(objv[i],1,&encodingObj); Tcl_IncrRefCount(searchIn); Tcl_ResetResult(interp); /* * TclGlob() changes the contents of globArgString, which causes * a segfault if we pass in a pointer to non-writeable memory. * TclGlob() puts its results directly into interp. */ strcpy(globArgString, "*.enc"); /* * The GLOBMODE_TAILS flag returns just the tail of each file * which is the encoding name with a .enc extension */ if ((TclGlob(interp, globArgString, searchIn, TCL_GLOBMODE_TAILS, NULL) == TCL_OK)) { int objc2 = 0; Tcl_Obj **objv2; int j; Tcl_ListObjGetElements(NULL, Tcl_GetObjResult(interp), &objc2, &objv2); for (j = 0; j < objc2; j++) { int length; char *string; string = Tcl_GetStringFromObj(objv2[j], &length); length -= 4; if (length > 0) { string[length] = '\0'; Tcl_CreateHashEntry(&table, string, &dummy); string[length] = '.'; } } } Tcl_DecrRefCount(searchIn); } Tcl_DecrRefCount(encodingObj); } /* * Clear any values placed in the result by globbing. */ Tcl_ResetResult(interp); resultPtr = Tcl_GetObjResult(interp); hPtr = Tcl_FirstHashEntry(&table, &search); while (hPtr != NULL) { Tcl_Obj *strPtr; strPtr = Tcl_NewStringObj(Tcl_GetHashKey(&table, hPtr), -1); Tcl_ListObjAppendElement(NULL, resultPtr, strPtr); hPtr = Tcl_NextHashEntry(&search); } Tcl_DeleteHashTable(&table); } /* *------------------------------------------------------------------------ * * Tcl_SetSystemEncoding -- * * Sets the default encoding that should be used whenever the user * passes a NULL value in to one of the conversion routines. * If the supplied name is NULL, the system encoding is reset to the * default system encoding. * * Results: * The return value is TCL_OK if the system encoding was successfully * set to the encoding specified by name, TCL_ERROR otherwise. If * TCL_ERROR is returned, an error message is left in interp's result * object, unless interp was NULL. * * Side effects: * The reference count of the new system encoding is incremented. * The reference count of the old system encoding is decremented and * it may be freed. * *------------------------------------------------------------------------ */ int Tcl_SetSystemEncoding(interp, name) Tcl_Interp *interp; /* Interp for error reporting, if not NULL. */ CONST char *name; /* The name of the desired encoding, or NULL * to reset to default encoding. */ { Tcl_Encoding encoding; Encoding *encodingPtr; if (name == NULL) { Tcl_MutexLock(&encodingMutex); encoding = defaultEncoding; encodingPtr = (Encoding *) encoding; encodingPtr->refCount++; Tcl_MutexUnlock(&encodingMutex); } else { encoding = Tcl_GetEncoding(interp, name); if (encoding == NULL) { return TCL_ERROR; } } Tcl_MutexLock(&encodingMutex); FreeEncoding(systemEncoding); systemEncoding = encoding; Tcl_MutexUnlock(&encodingMutex); return TCL_OK; } /* *--------------------------------------------------------------------------- * * Tcl_CreateEncoding -- * * This procedure is called to define a new encoding and the procedures * that are used to convert between the specified encoding and Unicode. * * Results: * Returns a token that represents the encoding. If an encoding with * the same name already existed, the old encoding token remains * valid and continues to behave as it used to, and will eventually * be garbage collected when the last reference to it goes away. Any * subsequent calls to Tcl_GetEncoding with the specified name will * retrieve the most recent encoding token. * * Side effects: * The new encoding type is entered into a table visible to all * interpreters, keyed off the encoding's name. For each call to * this procedure, there should eventually be a call to * Tcl_FreeEncoding, so that the database can be cleaned up when * encodings aren't needed anymore. * *--------------------------------------------------------------------------- */ Tcl_Encoding Tcl_CreateEncoding(typePtr) Tcl_EncodingType *typePtr; /* The encoding type. */ { Tcl_HashEntry *hPtr; int new; Encoding *encodingPtr; char *name; Tcl_MutexLock(&encodingMutex); hPtr = Tcl_CreateHashEntry(&encodingTable, typePtr->encodingName, &new); if (new == 0) { /* * Remove old encoding from hash table, but don't delete it until * last reference goes away. */ encodingPtr = (Encoding *) Tcl_GetHashValue(hPtr); encodingPtr->hPtr = NULL; } name = ckalloc((unsigned) strlen(typePtr->encodingName) + 1); encodingPtr = (Encoding *) ckalloc(sizeof(Encoding)); encodingPtr->name = strcpy(name, typePtr->encodingName); encodingPtr->toUtfProc = typePtr->toUtfProc; encodingPtr->fromUtfProc = typePtr->fromUtfProc; encodingPtr->freeProc = typePtr->freeProc; encodingPtr->nullSize = typePtr->nullSize; encodingPtr->clientData = typePtr->clientData; if (typePtr->nullSize == 1) { encodingPtr->lengthProc = (LengthProc *) strlen; } else { encodingPtr->lengthProc = (LengthProc *) unilen; } encodingPtr->refCount = 1; encodingPtr->hPtr = hPtr; Tcl_SetHashValue(hPtr, encodingPtr); Tcl_MutexUnlock(&encodingMutex); return (Tcl_Encoding) encodingPtr; } /* *------------------------------------------------------------------------- * * Tcl_ExternalToUtfDString -- * * Convert a source buffer from the specified encoding into UTF-8. * If any of the bytes in the source buffer are invalid or cannot * be represented in the target encoding, a default fallback * character will be substituted. * * Results: * The converted bytes are stored in the DString, which is then NULL * terminated. The return value is a pointer to the value stored * in the DString. * * Side effects: * None. * *------------------------------------------------------------------------- */ char * Tcl_ExternalToUtfDString(encoding, src, srcLen, dstPtr) Tcl_Encoding encoding; /* The encoding for the source string, or * NULL for the default system encoding. */ CONST char *src; /* Source string in specified encoding. */ int srcLen; /* Source string length in bytes, or < 0 for * encoding-specific string length. */ Tcl_DString *dstPtr; /* Uninitialized or free DString in which * the converted string is stored. */ { char *dst; Tcl_EncodingState state; Encoding *encodingPtr; int flags, dstLen, result, soFar, srcRead, dstWrote, dstChars; Tcl_DStringInit(dstPtr); dst = Tcl_DStringValue(dstPtr); dstLen = dstPtr->spaceAvl - 1; if (encoding == NULL) { encoding = systemEncoding; } encodingPtr = (Encoding *) encoding; if (src == NULL) { srcLen = 0; } else if (srcLen < 0) { srcLen = (*encodingPtr->lengthProc)(src); } flags = TCL_ENCODING_START | TCL_ENCODING_END; while (1) { result = (*encodingPtr->toUtfProc)(encodingPtr->clientData, src, srcLen, flags, &state, dst, dstLen, &srcRead, &dstWrote, &dstChars); soFar = dst + dstWrote - Tcl_DStringValue(dstPtr); if (result != TCL_CONVERT_NOSPACE) { Tcl_DStringSetLength(dstPtr, soFar); return Tcl_DStringValue(dstPtr); } flags &= ~TCL_ENCODING_START; src += srcRead; srcLen -= srcRead; if (Tcl_DStringLength(dstPtr) == 0) { Tcl_DStringSetLength(dstPtr, dstLen); } Tcl_DStringSetLength(dstPtr, 2 * Tcl_DStringLength(dstPtr) + 1); dst = Tcl_DStringValue(dstPtr) + soFar; dstLen = Tcl_DStringLength(dstPtr) - soFar - 1; } } /* *------------------------------------------------------------------------- * * Tcl_ExternalToUtf -- * * Convert a source buffer from the specified encoding into UTF-8. * * Results: * The return value is one of TCL_OK, TCL_CONVERT_MULTIBYTE, * TCL_CONVERT_SYNTAX, TCL_CONVERT_UNKNOWN, or TCL_CONVERT_NOSPACE, * as documented in tcl.h. * * Side effects: * The converted bytes are stored in the output buffer. * *------------------------------------------------------------------------- */ int Tcl_ExternalToUtf(interp, encoding, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr) Tcl_Interp *interp; /* Interp for error return, if not NULL. */ Tcl_Encoding encoding; /* The encoding for the source string, or * NULL for the default system encoding. */ CONST char *src; /* Source string in specified encoding. */ int srcLen; /* Source string length in bytes, or < 0 for * encoding-specific string length. */ int flags; /* Conversion control flags. */ Tcl_EncodingState *statePtr;/* Place for conversion routine to store * state information used during a piecewise * conversion. Contents of statePtr are * initialized and/or reset by conversion * routine under control of flags argument. */ char *dst; /* Output buffer in which converted string * is stored. */ int dstLen; /* The maximum length of output buffer in * bytes. */ int *srcReadPtr; /* Filled with the number of bytes from the * source string that were converted. This * may be less than the original source length * if there was a problem converting some * source characters. */ int *dstWrotePtr; /* Filled with the number of bytes that were * stored in the output buffer as a result of * the conversion. */ int *dstCharsPtr; /* Filled with the number of characters that * correspond to the bytes stored in the * output buffer. */ { Encoding *encodingPtr; int result, srcRead, dstWrote, dstChars; Tcl_EncodingState state; if (encoding == NULL) { encoding = systemEncoding; } encodingPtr = (Encoding *) encoding; if (src == NULL) { srcLen = 0; } else if (srcLen < 0) { srcLen = (*encodingPtr->lengthProc)(src); } if (statePtr == NULL) { flags |= TCL_ENCODING_START | TCL_ENCODING_END; statePtr = &state; } if (srcReadPtr == NULL) { srcReadPtr = &srcRead; } if (dstWrotePtr == NULL) { dstWrotePtr = &dstWrote; } if (dstCharsPtr == NULL) { dstCharsPtr = &dstChars; } /* * If there are any null characters in the middle of the buffer, they will * converted to the UTF-8 null character (\xC080). To get the actual * \0 at the end of the destination buffer, we need to append it manually. */ dstLen--; result = (*encodingPtr->toUtfProc)(encodingPtr->clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr); dst[*dstWrotePtr] = '\0'; return result; } /* *------------------------------------------------------------------------- * * Tcl_UtfToExternalDString -- * * Convert a source buffer from UTF-8 into the specified encoding. * If any of the bytes in the source buffer are invalid or cannot * be represented in the target encoding, a default fallback * character will be substituted. * * Results: * The converted bytes are stored in the DString, which is then * NULL terminated in an encoding-specific manner. The return value * is a pointer to the value stored in the DString. * * Side effects: * None. * *------------------------------------------------------------------------- */ char * Tcl_UtfToExternalDString(encoding, src, srcLen, dstPtr) Tcl_Encoding encoding; /* The encoding for the converted string, * or NULL for the default system encoding. */ CONST char *src; /* Source string in UTF-8. */ int srcLen; /* Source string length in bytes, or < 0 for * strlen(). */ Tcl_DString *dstPtr; /* Uninitialized or free DString in which * the converted string is stored. */ { char *dst; Tcl_EncodingState state; Encoding *encodingPtr; int flags, dstLen, result, soFar, srcRead, dstWrote, dstChars; Tcl_DStringInit(dstPtr); dst = Tcl_DStringValue(dstPtr); dstLen = dstPtr->spaceAvl - 1; if (encoding == NULL) { encoding = systemEncoding; } encodingPtr = (Encoding *) encoding; if (src == NULL) { srcLen = 0; } else if (srcLen < 0) { srcLen = strlen(src); } flags = TCL_ENCODING_START | TCL_ENCODING_END; while (1) { result = (*encodingPtr->fromUtfProc)(encodingPtr->clientData, src, srcLen, flags, &state, dst, dstLen, &srcRead, &dstWrote, &dstChars); soFar = dst + dstWrote - Tcl_DStringValue(dstPtr); if (result != TCL_CONVERT_NOSPACE) { if (encodingPtr->nullSize == 2) { Tcl_DStringSetLength(dstPtr, soFar + 1); } Tcl_DStringSetLength(dstPtr, soFar); return Tcl_DStringValue(dstPtr); } flags &= ~TCL_ENCODING_START; src += srcRead; srcLen -= srcRead; if (Tcl_DStringLength(dstPtr) == 0) { Tcl_DStringSetLength(dstPtr, dstLen); } Tcl_DStringSetLength(dstPtr, 2 * Tcl_DStringLength(dstPtr) + 1); dst = Tcl_DStringValue(dstPtr) + soFar; dstLen = Tcl_DStringLength(dstPtr) - soFar - 1; } } /* *------------------------------------------------------------------------- * * Tcl_UtfToExternal -- * * Convert a buffer from UTF-8 into the specified encoding. * * Results: * The return value is one of TCL_OK, TCL_CONVERT_MULTIBYTE, * TCL_CONVERT_SYNTAX, TCL_CONVERT_UNKNOWN, or TCL_CONVERT_NOSPACE, * as documented in tcl.h. * * Side effects: * The converted bytes are stored in the output buffer. * *------------------------------------------------------------------------- */ int Tcl_UtfToExternal(interp, encoding, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr) Tcl_Interp *interp; /* Interp for error return, if not NULL. */ Tcl_Encoding encoding; /* The encoding for the converted string, * or NULL for the default system encoding. */ CONST char *src; /* Source string in UTF-8. */ int srcLen; /* Source string length in bytes, or < 0 for * strlen(). */ int flags; /* Conversion control flags. */ Tcl_EncodingState *statePtr;/* Place for conversion routine to store * state information used during a piecewise * conversion. Contents of statePtr are * initialized and/or reset by conversion * routine under control of flags argument. */ char *dst; /* Output buffer in which converted string * is stored. */ int dstLen; /* The maximum length of output buffer in * bytes. */ int *srcReadPtr; /* Filled with the number of bytes from the * source string that were converted. This * may be less than the original source length * if there was a problem converting some * source characters. */ int *dstWrotePtr; /* Filled with the number of bytes that were * stored in the output buffer as a result of * the conversion. */ int *dstCharsPtr; /* Filled with the number of characters that * correspond to the bytes stored in the * output buffer. */ { Encoding *encodingPtr; int result, srcRead, dstWrote, dstChars; Tcl_EncodingState state; if (encoding == NULL) { encoding = systemEncoding; } encodingPtr = (Encoding *) encoding; if (src == NULL) { srcLen = 0; } else if (srcLen < 0) { srcLen = strlen(src); } if (statePtr == NULL) { flags |= TCL_ENCODING_START | TCL_ENCODING_END; statePtr = &state; } if (srcReadPtr == NULL) { srcReadPtr = &srcRead; } if (dstWrotePtr == NULL) { dstWrotePtr = &dstWrote; } if (dstCharsPtr == NULL) { dstCharsPtr = &dstChars; } dstLen -= encodingPtr->nullSize; result = (*encodingPtr->fromUtfProc)(encodingPtr->clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr); if (encodingPtr->nullSize == 2) { dst[*dstWrotePtr + 1] = '\0'; } dst[*dstWrotePtr] = '\0'; return result; } /* *--------------------------------------------------------------------------- * * Tcl_FindExecutable -- * * This procedure computes the absolute path name of the current * application, given its argv[0] value. * * Results: * None. * * Side effects: * The variable tclExecutableName gets filled in with the file * name for the application, if we figured it out. If we couldn't * figure it out, tclExecutableName is set to NULL. * *--------------------------------------------------------------------------- */ void Tcl_FindExecutable(argv0) CONST char *argv0; /* The value of the application's argv[0] * (native). */ { int mustCleanUtf; CONST char *name; Tcl_DString buffer, nameString; TclInitSubsystems(argv0); if (argv0 == NULL) { goto done; } if (tclExecutableName != NULL) { ckfree(tclExecutableName); tclExecutableName = NULL; } if ((name = TclpFindExecutable(argv0)) == NULL) { goto done; } /* * The value returned from TclpNameOfExecutable is a UTF string that * is possibly dirty depending on when it was initialized. * TclFindEncodings will indicate whether we must "clean" the UTF (as * reported by the underlying system). To assure that the UTF string * is a properly encoded native string for this system, convert the * UTF string to the default native encoding before the default * encoding is initialized. Then, convert it back to UTF after the * system encoding is loaded. */ Tcl_UtfToExternalDString(NULL, name, -1, &buffer); mustCleanUtf = TclFindEncodings(argv0); /* * Now it is OK to convert the native string back to UTF and set * the value of the tclExecutableName. */ if (mustCleanUtf) { Tcl_ExternalToUtfDString(NULL, Tcl_DStringValue(&buffer), -1, &nameString); tclExecutableName = (char *) ckalloc((unsigned) (Tcl_DStringLength(&nameString) + 1)); strcpy(tclExecutableName, Tcl_DStringValue(&nameString)); Tcl_DStringFree(&nameString); } else { tclExecutableName = (char *) ckalloc((unsigned) (strlen(name) + 1)); strcpy(tclExecutableName, name); } Tcl_DStringFree(&buffer); return; done: (void) TclFindEncodings(argv0); } /* *--------------------------------------------------------------------------- * * LoadEncodingFile -- * * Read a file that describes an encoding and create a new Encoding * from the data. * * Results: * The return value is the newly loaded Encoding, or NULL if * the file didn't exist of was in the incorrect format. If NULL was * returned, an error message is left in interp's result object, * unless interp was NULL. * * Side effects: * File read from disk. * *--------------------------------------------------------------------------- */ static Tcl_Encoding LoadEncodingFile(interp, name) Tcl_Interp *interp; /* Interp for error reporting, if not NULL. */ CONST char *name; /* The name of the encoding file on disk * and also the name for new encoding. */ { int objc, i, ch; Tcl_Obj **objv; Tcl_Obj *pathPtr; Tcl_Channel chan; Tcl_Encoding encoding; pathPtr = TclGetLibraryPath(); if (pathPtr == NULL) { goto unknown; } objc = 0; Tcl_ListObjGetElements(NULL, pathPtr, &objc, &objv); chan = NULL; for (i = 0; i < objc; i++) { chan = OpenEncodingFile(Tcl_GetString(objv[i]), name); if (chan != NULL) { break; } } if (chan == NULL) { goto unknown; } Tcl_SetChannelOption(NULL, chan, "-encoding", "utf-8"); while (1) { Tcl_DString ds; Tcl_DStringInit(&ds); Tcl_Gets(chan, &ds); ch = Tcl_DStringValue(&ds)[0]; Tcl_DStringFree(&ds); if (ch != '#') { break; } } encoding = NULL; switch (ch) { case 'S': { encoding = LoadTableEncoding(interp, name, ENCODING_SINGLEBYTE, chan); break; } case 'D': { encoding = LoadTableEncoding(interp, name, ENCODING_DOUBLEBYTE, chan); break; } case 'M': { encoding = LoadTableEncoding(interp, name, ENCODING_MULTIBYTE, chan); break; } case 'E': { encoding = LoadEscapeEncoding(name, chan); break; } } if ((encoding == NULL) && (interp != NULL)) { Tcl_AppendResult(interp, "invalid encoding file \"", name, "\"", NULL); } Tcl_Close(NULL, chan); return encoding; unknown: if (interp != NULL) { Tcl_AppendResult(interp, "unknown encoding \"", name, "\"", NULL); } return NULL; } /* *---------------------------------------------------------------------- * * OpenEncodingFile -- * * Look for the file encoding/.enc in the specified * directory. * * Results: * Returns an open file channel if the file exists. * * Side effects: * None. * *---------------------------------------------------------------------- */ static Tcl_Channel OpenEncodingFile(dir, name) CONST char *dir; CONST char *name; { CONST char *argv[3]; Tcl_DString pathString; CONST char *path; Tcl_Channel chan; Tcl_Obj *pathPtr; argv[0] = dir; argv[1] = "encoding"; argv[2] = name; Tcl_DStringInit(&pathString); Tcl_JoinPath(3, argv, &pathString); path = Tcl_DStringAppend(&pathString, ".enc", -1); pathPtr = Tcl_NewStringObj(path,-1); Tcl_IncrRefCount(pathPtr); chan = Tcl_FSOpenFileChannel(NULL, pathPtr, "r", 0); Tcl_DecrRefCount(pathPtr); Tcl_DStringFree(&pathString); return chan; } /* *------------------------------------------------------------------------- * * LoadTableEncoding -- * * Helper function for LoadEncodingTable(). Loads a table to that * converts between Unicode and some other encoding and creates an * encoding (using a TableEncoding structure) from that information. * * File contains binary data, but begins with a marker to indicate * byte-ordering, so that same binary file can be read on either * endian platforms. * * Results: * The return value is the new encoding, or NULL if the encoding * could not be created (because the file contained invalid data). * * Side effects: * None. * *------------------------------------------------------------------------- */ static Tcl_Encoding LoadTableEncoding(interp, name, type, chan) Tcl_Interp *interp; /* Interp for temporary obj while reading. */ CONST char *name; /* Name for new encoding. */ int type; /* Type of encoding (ENCODING_?????). */ Tcl_Channel chan; /* File containing new encoding. */ { Tcl_DString lineString; Tcl_Obj *objPtr; char *line; int i, hi, lo, numPages, symbol, fallback; unsigned char used[256]; unsigned int size; TableEncodingData *dataPtr; unsigned short *pageMemPtr; Tcl_EncodingType encType; /* * Speed over memory. Use a full 256 character table to decode hex * sequences in the encoding files. */ static char staticHex[] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 0 ... 15 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 16 ... 31 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 32 ... 47 */ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0, 0, 0, 0, /* 48 ... 63 */ 0, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 64 ... 79 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 80 ... 95 */ 0, 10, 11, 12, 13, 14, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 96 ... 111 */ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, 0, 0, 0, 0, 0, /* 112 ... 127 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 128 ... 143 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 144 ... 159 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 160 ... 175 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 176 ... 191 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 192 ... 207 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 208 ... 223 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 224 ... 239 */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 240 ... 255 */ }; Tcl_DStringInit(&lineString); Tcl_Gets(chan, &lineString); line = Tcl_DStringValue(&lineString); fallback = (int) strtol(line, &line, 16); symbol = (int) strtol(line, &line, 10); numPages = (int) strtol(line, &line, 10); Tcl_DStringFree(&lineString); if (numPages < 0) { numPages = 0; } else if (numPages > 256) { numPages = 256; } memset(used, 0, sizeof(used)); #undef PAGESIZE #define PAGESIZE (256 * sizeof(unsigned short)) dataPtr = (TableEncodingData *) ckalloc(sizeof(TableEncodingData)); memset(dataPtr, 0, sizeof(TableEncodingData)); dataPtr->fallback = fallback; /* * Read the table that maps characters to Unicode. Performs a single * malloc to get the memory for the array and all the pages needed by * the array. */ size = 256 * sizeof(unsigned short *) + numPages * PAGESIZE; dataPtr->toUnicode = (unsigned short **) ckalloc(size); memset(dataPtr->toUnicode, 0, size); pageMemPtr = (unsigned short *) (dataPtr->toUnicode + 256); if (interp == NULL) { objPtr = Tcl_NewObj(); } else { objPtr = Tcl_GetObjResult(interp); } for (i = 0; i < numPages; i++) { int ch; char *p; Tcl_ReadChars(chan, objPtr, 3 + 16 * (16 * 4 + 1), 0); p = Tcl_GetString(objPtr); hi = (staticHex[(unsigned int)p[0]] << 4) + staticHex[(unsigned int)p[1]]; dataPtr->toUnicode[hi] = pageMemPtr; p += 2; for (lo = 0; lo < 256; lo++) { if ((lo & 0x0f) == 0) { p++; } ch = (staticHex[(unsigned int)p[0]] << 12) + (staticHex[(unsigned int)p[1]] << 8) + (staticHex[(unsigned int)p[2]] << 4) + staticHex[(unsigned int)p[3]]; if (ch != 0) { used[ch >> 8] = 1; } *pageMemPtr = (unsigned short) ch; pageMemPtr++; p += 4; } } if (interp == NULL) { Tcl_DecrRefCount(objPtr); } else { Tcl_ResetResult(interp); } if (type == ENCODING_DOUBLEBYTE) { memset(dataPtr->prefixBytes, 1, sizeof(dataPtr->prefixBytes)); } else { for (hi = 1; hi < 256; hi++) { if (dataPtr->toUnicode[hi] != NULL) { dataPtr->prefixBytes[hi] = 1; } } } /* * Invert toUnicode array to produce the fromUnicode array. Performs a * single malloc to get the memory for the array and all the pages * needed by the array. While reading in the toUnicode array, we * remembered what pages that would be needed for the fromUnicode array. */ if (symbol) { used[0] = 1; } numPages = 0; for (hi = 0; hi < 256; hi++) { if (used[hi]) { numPages++; } } size = 256 * sizeof(unsigned short *) + numPages * PAGESIZE; dataPtr->fromUnicode = (unsigned short **) ckalloc(size); memset(dataPtr->fromUnicode, 0, size); pageMemPtr = (unsigned short *) (dataPtr->fromUnicode + 256); for (hi = 0; hi < 256; hi++) { if (dataPtr->toUnicode[hi] == NULL) { dataPtr->toUnicode[hi] = emptyPage; } else { for (lo = 0; lo < 256; lo++) { int ch; ch = dataPtr->toUnicode[hi][lo]; if (ch != 0) { unsigned short *page; page = dataPtr->fromUnicode[ch >> 8]; if (page == NULL) { page = pageMemPtr; pageMemPtr += 256; dataPtr->fromUnicode[ch >> 8] = page; } page[ch & 0xff] = (unsigned short) ((hi << 8) + lo); } } } } if (type == ENCODING_MULTIBYTE) { /* * If multibyte encodings don't have a backslash character, define * one. Otherwise, on Windows, native file names won't work because * the backslash in the file name will map to the unknown character * (question mark) when converting from UTF-8 to external encoding. */ if (dataPtr->fromUnicode[0] != NULL) { if (dataPtr->fromUnicode[0]['\\'] == '\0') { dataPtr->fromUnicode[0]['\\'] = '\\'; } } } if (symbol) { unsigned short *page; /* * Make a special symbol encoding that not only maps the symbol * characters from their Unicode code points down into page 0, but * also ensure that the characters on page 0 map to themselves. * This is so that a symbol font can be used to display a simple * string like "abcd" and have alpha, beta, chi, delta show up, * rather than have "unknown" chars show up because strictly * speaking the symbol font doesn't have glyphs for those low ascii * chars. */ page = dataPtr->fromUnicode[0]; if (page == NULL) { page = pageMemPtr; dataPtr->fromUnicode[0] = page; } for (lo = 0; lo < 256; lo++) { if (dataPtr->toUnicode[0][lo] != 0) { page[lo] = (unsigned short) lo; } } } for (hi = 0; hi < 256; hi++) { if (dataPtr->fromUnicode[hi] == NULL) { dataPtr->fromUnicode[hi] = emptyPage; } } /* * For trailing 'R'everse encoding, see [Patch #689341] */ Tcl_DStringInit(&lineString); do { int len; /* skip leading empty lines */ while ((len = Tcl_Gets(chan, &lineString)) == 0) ; if (len < 0) { break; } line = Tcl_DStringValue(&lineString); if (line[0] != 'R') { break; } for (Tcl_DStringSetLength(&lineString, 0); (len = Tcl_Gets(chan, &lineString)) >= 0; Tcl_DStringSetLength(&lineString, 0)) { unsigned char* p; int to, from; if (len < 5) { continue; } p = (unsigned char*) Tcl_DStringValue(&lineString); to = (staticHex[p[0]] << 12) + (staticHex[p[1]] << 8) + (staticHex[p[2]] << 4) + staticHex[p[3]]; if (to == 0) { continue; } for (p += 5, len -= 5; len >= 0 && *p; p += 5, len -= 5) { from = (staticHex[p[0]] << 12) + (staticHex[p[1]] << 8) + (staticHex[p[2]] << 4) + staticHex[p[3]]; if (from == 0) { continue; } dataPtr->fromUnicode[from >> 8][from & 0xff] = to; } } } while (0); Tcl_DStringFree(&lineString); encType.encodingName = name; encType.toUtfProc = TableToUtfProc; encType.fromUtfProc = TableFromUtfProc; encType.freeProc = TableFreeProc; encType.nullSize = (type == ENCODING_DOUBLEBYTE) ? 2 : 1; encType.clientData = (ClientData) dataPtr; return Tcl_CreateEncoding(&encType); } /* *------------------------------------------------------------------------- * * LoadEscapeEncoding -- * * Helper function for LoadEncodingTable(). Loads a state machine * that converts between Unicode and some other encoding. * * File contains text data that describes the escape sequences that * are used to choose an encoding and the associated names for the * sub-encodings. * * Results: * The return value is the new encoding, or NULL if the encoding * could not be created (because the file contained invalid data). * * Side effects: * None. * *------------------------------------------------------------------------- */ static Tcl_Encoding LoadEscapeEncoding(name, chan) CONST char *name; /* Name for new encoding. */ Tcl_Channel chan; /* File containing new encoding. */ { int i; unsigned int size; Tcl_DString escapeData; char init[16], final[16]; EscapeEncodingData *dataPtr; Tcl_EncodingType type; init[0] = '\0'; final[0] = '\0'; Tcl_DStringInit(&escapeData); while (1) { int argc; CONST char **argv; char *line; Tcl_DString lineString; Tcl_DStringInit(&lineString); if (Tcl_Gets(chan, &lineString) < 0) { break; } line = Tcl_DStringValue(&lineString); if (Tcl_SplitList(NULL, line, &argc, &argv) != TCL_OK) { continue; } if (argc >= 2) { if (strcmp(argv[0], "name") == 0) { ; } else if (strcmp(argv[0], "init") == 0) { strncpy(init, argv[1], sizeof(init)); init[sizeof(init) - 1] = '\0'; } else if (strcmp(argv[0], "final") == 0) { strncpy(final, argv[1], sizeof(final)); final[sizeof(final) - 1] = '\0'; } else { EscapeSubTable est; strncpy(est.sequence, argv[1], sizeof(est.sequence)); est.sequence[sizeof(est.sequence) - 1] = '\0'; est.sequenceLen = strlen(est.sequence); strncpy(est.name, argv[0], sizeof(est.name)); est.name[sizeof(est.name) - 1] = '\0'; /* To avoid infinite recursion in [encoding system iso2022-*]*/ Tcl_GetEncoding(NULL, est.name); est.encodingPtr = NULL; Tcl_DStringAppend(&escapeData, (char *) &est, sizeof(est)); } } ckfree((char *) argv); Tcl_DStringFree(&lineString); } size = sizeof(EscapeEncodingData) - sizeof(EscapeSubTable) + Tcl_DStringLength(&escapeData); dataPtr = (EscapeEncodingData *) ckalloc(size); dataPtr->initLen = strlen(init); strcpy(dataPtr->init, init); dataPtr->finalLen = strlen(final); strcpy(dataPtr->final, final); dataPtr->numSubTables = Tcl_DStringLength(&escapeData) / sizeof(EscapeSubTable); memcpy((VOID *) dataPtr->subTables, (VOID *) Tcl_DStringValue(&escapeData), (size_t) Tcl_DStringLength(&escapeData)); Tcl_DStringFree(&escapeData); memset(dataPtr->prefixBytes, 0, sizeof(dataPtr->prefixBytes)); for (i = 0; i < dataPtr->numSubTables; i++) { dataPtr->prefixBytes[UCHAR(dataPtr->subTables[i].sequence[0])] = 1; } if (dataPtr->init[0] != '\0') { dataPtr->prefixBytes[UCHAR(dataPtr->init[0])] = 1; } if (dataPtr->final[0] != '\0') { dataPtr->prefixBytes[UCHAR(dataPtr->final[0])] = 1; } type.encodingName = name; type.toUtfProc = EscapeToUtfProc; type.fromUtfProc = EscapeFromUtfProc; type.freeProc = EscapeFreeProc; type.nullSize = 1; type.clientData = (ClientData) dataPtr; return Tcl_CreateEncoding(&type); } /* *------------------------------------------------------------------------- * * BinaryProc -- * * The default conversion when no other conversion is specified. * No translation is done; source bytes are copied directly to * destination bytes. * * Results: * Returns TCL_OK if conversion was successful. * * Side effects: * None. * *------------------------------------------------------------------------- */ static int BinaryProc(clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr) ClientData clientData; /* Not used. */ CONST char *src; /* Source string (unknown encoding). */ int srcLen; /* Source string length in bytes. */ int flags; /* Conversion control flags. */ Tcl_EncodingState *statePtr;/* Place for conversion routine to store * state information used during a piecewise * conversion. Contents of statePtr are * initialized and/or reset by conversion * routine under control of flags argument. */ char *dst; /* Output buffer in which converted string * is stored. */ int dstLen; /* The maximum length of output buffer in * bytes. */ int *srcReadPtr; /* Filled with the number of bytes from the * source string that were converted. */ int *dstWrotePtr; /* Filled with the number of bytes that were * stored in the output buffer as a result of * the conversion. */ int *dstCharsPtr; /* Filled with the number of characters that * correspond to the bytes stored in the * output buffer. */ { int result; result = TCL_OK; dstLen -= TCL_UTF_MAX - 1; if (dstLen < 0) { dstLen = 0; } if (srcLen > dstLen) { srcLen = dstLen; result = TCL_CONVERT_NOSPACE; } *srcReadPtr = srcLen; *dstWrotePtr = srcLen; *dstCharsPtr = srcLen; for ( ; --srcLen >= 0; ) { *dst++ = *src++; } return result; } /* *------------------------------------------------------------------------- * * UtfExtToUtfIntProc -- * * Convert from UTF-8 to UTF-8. While converting null-bytes from * the Tcl's internal representation (0xc0, 0x80) to the official * representation (0x00). See UtfToUtfProc for details. * * Results: * Returns TCL_OK if conversion was successful. * * Side effects: * None. * *------------------------------------------------------------------------- */ static int UtfIntToUtfExtProc(clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr) ClientData clientData; /* Not used. */ CONST char *src; /* Source string in UTF-8. */ int srcLen; /* Source string length in bytes. */ int flags; /* Conversion control flags. */ Tcl_EncodingState *statePtr;/* Place for conversion routine to store * state information used during a piecewise * conversion. Contents of statePtr are * initialized and/or reset by conversion * routine under control of flags argument. */ char *dst; /* Output buffer in which converted string * is stored. */ int dstLen; /* The maximum length of output buffer in * bytes. */ int *srcReadPtr; /* Filled with the number of bytes from the * source string that were converted. This * may be less than the original source length * if there was a problem converting some * source characters. */ int *dstWrotePtr; /* Filled with the number of bytes that were * stored in the output buffer as a result of * the conversion. */ int *dstCharsPtr; /* Filled with the number of characters that * correspond to the bytes stored in the * output buffer. */ { return UtfToUtfProc(clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr, 1); } /* *------------------------------------------------------------------------- * * UtfExtToUtfIntProc -- * * Convert from UTF-8 to UTF-8 while converting null-bytes from * the official representation (0x00) to Tcl's internal * representation (0xc0, 0x80). See UtfToUtfProc for details. * * Results: * Returns TCL_OK if conversion was successful. * * Side effects: * None. * *------------------------------------------------------------------------- */ static int UtfExtToUtfIntProc(clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr) ClientData clientData; /* Not used. */ CONST char *src; /* Source string in UTF-8. */ int srcLen; /* Source string length in bytes. */ int flags; /* Conversion control flags. */ Tcl_EncodingState *statePtr;/* Place for conversion routine to store * state information used during a piecewise * conversion. Contents of statePtr are * initialized and/or reset by conversion * routine under control of flags argument. */ char *dst; /* Output buffer in which converted string * is stored. */ int dstLen; /* The maximum length of output buffer in * bytes. */ int *srcReadPtr; /* Filled with the number of bytes from the * source string that were converted. This * may be less than the original source length * if there was a problem converting some * source characters. */ int *dstWrotePtr; /* Filled with the number of bytes that were * stored in the output buffer as a result of * the conversion. */ int *dstCharsPtr; /* Filled with the number of characters that * correspond to the bytes stored in the * output buffer. */ { return UtfToUtfProc(clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr, 0); } /* *------------------------------------------------------------------------- * * UtfToUtfProc -- * * Convert from UTF-8 to UTF-8. Note that the UTF-8 to UTF-8 * translation is not a no-op, because it will turn a stream of * improperly formed UTF-8 into a properly formed stream. * * Results: * Returns TCL_OK if conversion was successful. * * Side effects: * None. * *------------------------------------------------------------------------- */ static int UtfToUtfProc(clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr, pureNullMode) ClientData clientData; /* Not used. */ CONST char *src; /* Source string in UTF-8. */ int srcLen; /* Source string length in bytes. */ int flags; /* Conversion control flags. */ Tcl_EncodingState *statePtr;/* Place for conversion routine to store * state information used during a piecewise * conversion. Contents of statePtr are * initialized and/or reset by conversion * routine under control of flags argument. */ char *dst; /* Output buffer in which converted string * is stored. */ int dstLen; /* The maximum length of output buffer in * bytes. */ int *srcReadPtr; /* Filled with the number of bytes from the * source string that were converted. This * may be less than the original source length * if there was a problem converting some * source characters. */ int *dstWrotePtr; /* Filled with the number of bytes that were * stored in the output buffer as a result of * the conversion. */ int *dstCharsPtr; /* Filled with the number of characters that * correspond to the bytes stored in the * output buffer. */ int pureNullMode; /* Convert embedded nulls from * internal representation to real * null-bytes or vice versa */ { CONST char *srcStart, *srcEnd, *srcClose; char *dstStart, *dstEnd; int result, numChars; Tcl_UniChar ch; result = TCL_OK; srcStart = src; srcEnd = src + srcLen; srcClose = srcEnd; if ((flags & TCL_ENCODING_END) == 0) { srcClose -= TCL_UTF_MAX; } dstStart = dst; dstEnd = dst + dstLen - TCL_UTF_MAX; for (numChars = 0; src < srcEnd; numChars++) { if ((src > srcClose) && (!Tcl_UtfCharComplete(src, srcEnd - src))) { /* * If there is more string to follow, this will ensure that the * last UTF-8 character in the source buffer hasn't been cut off. */ result = TCL_CONVERT_MULTIBYTE; break; } if (dst > dstEnd) { result = TCL_CONVERT_NOSPACE; break; } if (UCHAR(*src) < 0x80 && !(UCHAR(*src) == 0 && pureNullMode == 0)) { /* * Copy 7bit chatacters, but skip null-bytes when we are * in input mode, so that they get converted to 0xc080. */ *dst++ = *src++; } else if (pureNullMode == 1 && UCHAR(*src) == 0xc0 && UCHAR(*(src+1)) == 0x80) { /* * Convert 0xc080 to real nulls when we are in output mode. */ *dst++ = 0; src += 2; } else { src += Tcl_UtfToUniChar(src, &ch); dst += Tcl_UniCharToUtf(ch, dst); } } *srcReadPtr = src - srcStart; *dstWrotePtr = dst - dstStart; *dstCharsPtr = numChars; return result; } /* *------------------------------------------------------------------------- * * UnicodeToUtfProc -- * * Convert from Unicode to UTF-8. * * Results: * Returns TCL_OK if conversion was successful. * * Side effects: * None. * *------------------------------------------------------------------------- */ static int UnicodeToUtfProc(clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr) ClientData clientData; /* Not used. */ CONST char *src; /* Source string in Unicode. */ int srcLen; /* Source string length in bytes. */ int flags; /* Conversion control flags. */ Tcl_EncodingState *statePtr;/* Place for conversion routine to store * state information used during a piecewise * conversion. Contents of statePtr are * initialized and/or reset by conversion * routine under control of flags argument. */ char *dst; /* Output buffer in which converted string * is stored. */ int dstLen; /* The maximum length of output buffer in * bytes. */ int *srcReadPtr; /* Filled with the number of bytes from the * source string that were converted. This * may be less than the original source length * if there was a problem converting some * source characters. */ int *dstWrotePtr; /* Filled with the number of bytes that were * stored in the output buffer as a result of * the conversion. */ int *dstCharsPtr; /* Filled with the number of characters that * correspond to the bytes stored in the * output buffer. */ { CONST Tcl_UniChar *wSrc, *wSrcStart, *wSrcEnd; char *dstEnd, *dstStart; int result, numChars; result = TCL_OK; if ((srcLen % sizeof(Tcl_UniChar)) != 0) { result = TCL_CONVERT_MULTIBYTE; srcLen /= sizeof(Tcl_UniChar); srcLen *= sizeof(Tcl_UniChar); } wSrc = (Tcl_UniChar *) src; wSrcStart = (Tcl_UniChar *) src; wSrcEnd = (Tcl_UniChar *) (src + srcLen); dstStart = dst; dstEnd = dst + dstLen - TCL_UTF_MAX; for (numChars = 0; wSrc < wSrcEnd; numChars++) { if (dst > dstEnd) { result = TCL_CONVERT_NOSPACE; break; } /* * Special case for 1-byte utf chars for speed. */ if (*wSrc && *wSrc < 0x80) { *dst++ = (char) *wSrc; } else { dst += Tcl_UniCharToUtf(*wSrc, dst); } wSrc++; } *srcReadPtr = (char *) wSrc - (char *) wSrcStart; *dstWrotePtr = dst - dstStart; *dstCharsPtr = numChars; return result; } /* *------------------------------------------------------------------------- * * UtfToUnicodeProc -- * * Convert from UTF-8 to Unicode. * * Results: * Returns TCL_OK if conversion was successful. * * Side effects: * None. * *------------------------------------------------------------------------- */ static int UtfToUnicodeProc(clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr) ClientData clientData; /* TableEncodingData that specifies encoding. */ CONST char *src; /* Source string in UTF-8. */ int srcLen; /* Source string length in bytes. */ int flags; /* Conversion control flags. */ Tcl_EncodingState *statePtr;/* Place for conversion routine to store * state information used during a piecewise * conversion. Contents of statePtr are * initialized and/or reset by conversion * routine under control of flags argument. */ char *dst; /* Output buffer in which converted string * is stored. */ int dstLen; /* The maximum length of output buffer in * bytes. */ int *srcReadPtr; /* Filled with the number of bytes from the * source string that were converted. This * may be less than the original source length * if there was a problem converting some * source characters. */ int *dstWrotePtr; /* Filled with the number of bytes that were * stored in the output buffer as a result of * the conversion. */ int *dstCharsPtr; /* Filled with the number of characters that * correspond to the bytes stored in the * output buffer. */ { CONST char *srcStart, *srcEnd, *srcClose; Tcl_UniChar *wDst, *wDstStart, *wDstEnd; int result, numChars; srcStart = src; srcEnd = src + srcLen; srcClose = srcEnd; if ((flags & TCL_ENCODING_END) == 0) { srcClose -= TCL_UTF_MAX; } wDst = (Tcl_UniChar *) dst; wDstStart = (Tcl_UniChar *) dst; wDstEnd = (Tcl_UniChar *) (dst + dstLen - sizeof(Tcl_UniChar)); result = TCL_OK; for (numChars = 0; src < srcEnd; numChars++) { if ((src > srcClose) && (!Tcl_UtfCharComplete(src, srcEnd - src))) { /* * If there is more string to follow, this will ensure that the * last UTF-8 character in the source buffer hasn't been cut off. */ result = TCL_CONVERT_MULTIBYTE; break; } if (wDst > wDstEnd) { result = TCL_CONVERT_NOSPACE; break; } src += TclUtfToUniChar(src, wDst); wDst++; } *srcReadPtr = src - srcStart; *dstWrotePtr = (char *) wDst - (char *) wDstStart; *dstCharsPtr = numChars; return result; } /* *------------------------------------------------------------------------- * * TableToUtfProc -- * * Convert from the encoding specified by the TableEncodingData into * UTF-8. * * Results: * Returns TCL_OK if conversion was successful. * * Side effects: * None. * *------------------------------------------------------------------------- */ static int TableToUtfProc(clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr) ClientData clientData; /* TableEncodingData that specifies * encoding. */ CONST char *src; /* Source string in specified encoding. */ int srcLen; /* Source string length in bytes. */ int flags; /* Conversion control flags. */ Tcl_EncodingState *statePtr;/* Place for conversion routine to store * state information used during a piecewise * conversion. Contents of statePtr are * initialized and/or reset by conversion * routine under control of flags argument. */ char *dst; /* Output buffer in which converted string * is stored. */ int dstLen; /* The maximum length of output buffer in * bytes. */ int *srcReadPtr; /* Filled with the number of bytes from the * source string that were converted. This * may be less than the original source length * if there was a problem converting some * source characters. */ int *dstWrotePtr; /* Filled with the number of bytes that were * stored in the output buffer as a result of * the conversion. */ int *dstCharsPtr; /* Filled with the number of characters that * correspond to the bytes stored in the * output buffer. */ { CONST char *srcStart, *srcEnd; char *dstEnd, *dstStart, *prefixBytes; int result, byte, numChars; Tcl_UniChar ch; unsigned short **toUnicode; unsigned short *pageZero; TableEncodingData *dataPtr; srcStart = src; srcEnd = src + srcLen; dstStart = dst; dstEnd = dst + dstLen - TCL_UTF_MAX; dataPtr = (TableEncodingData *) clientData; toUnicode = dataPtr->toUnicode; prefixBytes = dataPtr->prefixBytes; pageZero = toUnicode[0]; result = TCL_OK; for (numChars = 0; src < srcEnd; numChars++) { if (dst > dstEnd) { result = TCL_CONVERT_NOSPACE; break; } byte = *((unsigned char *) src); if (prefixBytes[byte]) { src++; if (src >= srcEnd) { src--; result = TCL_CONVERT_MULTIBYTE; break; } ch = toUnicode[byte][*((unsigned char *) src)]; } else { ch = pageZero[byte]; } if ((ch == 0) && (byte != 0)) { if (flags & TCL_ENCODING_STOPONERROR) { result = TCL_CONVERT_SYNTAX; break; } if (prefixBytes[byte]) { src--; } ch = (Tcl_UniChar) byte; } /* * Special case for 1-byte utf chars for speed. */ if (ch && ch < 0x80) { *dst++ = (char) ch; } else { dst += Tcl_UniCharToUtf(ch, dst); } src++; } *srcReadPtr = src - srcStart; *dstWrotePtr = dst - dstStart; *dstCharsPtr = numChars; return result; } /* *------------------------------------------------------------------------- * * TableFromUtfProc -- * * Convert from UTF-8 into the encoding specified by the * TableEncodingData. * * Results: * Returns TCL_OK if conversion was successful. * * Side effects: * None. * *------------------------------------------------------------------------- */ static int TableFromUtfProc(clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr) ClientData clientData; /* TableEncodingData that specifies * encoding. */ CONST char *src; /* Source string in UTF-8. */ int srcLen; /* Source string length in bytes. */ int flags; /* Conversion control flags. */ Tcl_EncodingState *statePtr;/* Place for conversion routine to store * state information used during a piecewise * conversion. Contents of statePtr are * initialized and/or reset by conversion * routine under control of flags argument. */ char *dst; /* Output buffer in which converted string * is stored. */ int dstLen; /* The maximum length of output buffer in * bytes. */ int *srcReadPtr; /* Filled with the number of bytes from the * source string that were converted. This * may be less than the original source length * if there was a problem converting some * source characters. */ int *dstWrotePtr; /* Filled with the number of bytes that were * stored in the output buffer as a result of * the conversion. */ int *dstCharsPtr; /* Filled with the number of characters that * correspond to the bytes stored in the * output buffer. */ { CONST char *srcStart, *srcEnd, *srcClose; char *dstStart, *dstEnd, *prefixBytes; Tcl_UniChar ch; int result, len, word, numChars; TableEncodingData *dataPtr; unsigned short **fromUnicode; result = TCL_OK; dataPtr = (TableEncodingData *) clientData; prefixBytes = dataPtr->prefixBytes; fromUnicode = dataPtr->fromUnicode; srcStart = src; srcEnd = src + srcLen; srcClose = srcEnd; if ((flags & TCL_ENCODING_END) == 0) { srcClose -= TCL_UTF_MAX; } dstStart = dst; dstEnd = dst + dstLen - 1; for (numChars = 0; src < srcEnd; numChars++) { if ((src > srcClose) && (!Tcl_UtfCharComplete(src, srcEnd - src))) { /* * If there is more string to follow, this will ensure that the * last UTF-8 character in the source buffer hasn't been cut off. */ result = TCL_CONVERT_MULTIBYTE; break; } len = TclUtfToUniChar(src, &ch); #if TCL_UTF_MAX > 3 /* * This prevents a crash condition. More evaluation is required * for full support of int Tcl_UniChar. [Bug 1004065] */ if (ch & 0xffff0000) { word = 0; } else #endif word = fromUnicode[(ch >> 8)][ch & 0xff]; if ((word == 0) && (ch != 0)) { if (flags & TCL_ENCODING_STOPONERROR) { result = TCL_CONVERT_UNKNOWN; break; } word = dataPtr->fallback; } if (prefixBytes[(word >> 8)] != 0) { if (dst + 1 > dstEnd) { result = TCL_CONVERT_NOSPACE; break; } dst[0] = (char) (word >> 8); dst[1] = (char) word; dst += 2; } else { if (dst > dstEnd) { result = TCL_CONVERT_NOSPACE; break; } dst[0] = (char) word; dst++; } src += len; } *srcReadPtr = src - srcStart; *dstWrotePtr = dst - dstStart; *dstCharsPtr = numChars; return result; } /* *--------------------------------------------------------------------------- * * TableFreeProc -- * * This procedure is invoked when an encoding is deleted. It deletes * the memory used by the TableEncodingData. * * Results: * None. * * Side effects: * Memory freed. * *--------------------------------------------------------------------------- */ static void TableFreeProc(clientData) ClientData clientData; /* TableEncodingData that specifies * encoding. */ { TableEncodingData *dataPtr; /* * Make sure we aren't freeing twice on shutdown. [Bug #219314] */ dataPtr = (TableEncodingData *) clientData; ckfree((char *) dataPtr->toUnicode); ckfree((char *) dataPtr->fromUnicode); ckfree((char *) dataPtr); } /* *------------------------------------------------------------------------- * * EscapeToUtfProc -- * * Convert from the encoding specified by the EscapeEncodingData into * UTF-8. * * Results: * Returns TCL_OK if conversion was successful. * * Side effects: * None. * *------------------------------------------------------------------------- */ static int EscapeToUtfProc(clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr) ClientData clientData; /* EscapeEncodingData that specifies * encoding. */ CONST char *src; /* Source string in specified encoding. */ int srcLen; /* Source string length in bytes. */ int flags; /* Conversion control flags. */ Tcl_EncodingState *statePtr;/* Place for conversion routine to store * state information used during a piecewise * conversion. Contents of statePtr are * initialized and/or reset by conversion * routine under control of flags argument. */ char *dst; /* Output buffer in which converted string * is stored. */ int dstLen; /* The maximum length of output buffer in * bytes. */ int *srcReadPtr; /* Filled with the number of bytes from the * source string that were converted. This * may be less than the original source length * if there was a problem converting some * source characters. */ int *dstWrotePtr; /* Filled with the number of bytes that were * stored in the output buffer as a result of * the conversion. */ int *dstCharsPtr; /* Filled with the number of characters that * correspond to the bytes stored in the * output buffer. */ { EscapeEncodingData *dataPtr; char *prefixBytes, *tablePrefixBytes; unsigned short **tableToUnicode; Encoding *encodingPtr; int state, result, numChars; CONST char *srcStart, *srcEnd; char *dstStart, *dstEnd; result = TCL_OK; tablePrefixBytes = NULL; /* lint. */ tableToUnicode = NULL; /* lint. */ dataPtr = (EscapeEncodingData *) clientData; prefixBytes = dataPtr->prefixBytes; encodingPtr = NULL; srcStart = src; srcEnd = src + srcLen; dstStart = dst; dstEnd = dst + dstLen - TCL_UTF_MAX; state = (int) *statePtr; if (flags & TCL_ENCODING_START) { state = 0; } for (numChars = 0; src < srcEnd; ) { int byte, hi, lo, ch; if (dst > dstEnd) { result = TCL_CONVERT_NOSPACE; break; } byte = *((unsigned char *) src); if (prefixBytes[byte]) { unsigned int left, len, longest; int checked, i; EscapeSubTable *subTablePtr; /* * Saw the beginning of an escape sequence. */ left = srcEnd - src; len = dataPtr->initLen; longest = len; checked = 0; if (len <= left) { checked++; if ((len > 0) && (memcmp(src, dataPtr->init, len) == 0)) { /* * If we see initialization string, skip it, even if we're * not at the beginning of the buffer. */ src += len; continue; } } len = dataPtr->finalLen; if (len > longest) { longest = len; } if (len <= left) { checked++; if ((len > 0) && (memcmp(src, dataPtr->final, len) == 0)) { /* * If we see finalization string, skip it, even if we're * not at the end of the buffer. */ src += len; continue; } } subTablePtr = dataPtr->subTables; for (i = 0; i < dataPtr->numSubTables; i++) { len = subTablePtr->sequenceLen; if (len > longest) { longest = len; } if (len <= left) { checked++; if ((len > 0) && (memcmp(src, subTablePtr->sequence, len) == 0)) { state = i; encodingPtr = NULL; subTablePtr = NULL; src += len; break; } } subTablePtr++; } if (subTablePtr == NULL) { /* * A match was found, the escape sequence was consumed, and * the state was updated. */ continue; } /* * We have a split-up or unrecognized escape sequence. If we * checked all the sequences, then it's a syntax error, * otherwise we need more bytes to determine a match. */ if ((checked == dataPtr->numSubTables + 2) || (flags & TCL_ENCODING_END)) { if ((flags & TCL_ENCODING_STOPONERROR) == 0) { /* * Skip the unknown escape sequence. */ src += longest; continue; } result = TCL_CONVERT_SYNTAX; } else { result = TCL_CONVERT_MULTIBYTE; } break; } if (encodingPtr == NULL) { TableEncodingData *tableDataPtr; encodingPtr = GetTableEncoding(dataPtr, state); tableDataPtr = (TableEncodingData *) encodingPtr->clientData; tablePrefixBytes = tableDataPtr->prefixBytes; tableToUnicode = tableDataPtr->toUnicode; } if (tablePrefixBytes[byte]) { src++; if (src >= srcEnd) { src--; result = TCL_CONVERT_MULTIBYTE; break; } hi = byte; lo = *((unsigned char *) src); } else { hi = 0; lo = byte; } ch = tableToUnicode[hi][lo]; dst += Tcl_UniCharToUtf(ch, dst); src++; numChars++; } *statePtr = (Tcl_EncodingState) state; *srcReadPtr = src - srcStart; *dstWrotePtr = dst - dstStart; *dstCharsPtr = numChars; return result; } /* *------------------------------------------------------------------------- * * EscapeFromUtfProc -- * * Convert from UTF-8 into the encoding specified by the * EscapeEncodingData. * * Results: * Returns TCL_OK if conversion was successful. * * Side effects: * None. * *------------------------------------------------------------------------- */ static int EscapeFromUtfProc(clientData, src, srcLen, flags, statePtr, dst, dstLen, srcReadPtr, dstWrotePtr, dstCharsPtr) ClientData clientData; /* EscapeEncodingData that specifies * encoding. */ CONST char *src; /* Source string in UTF-8. */ int srcLen; /* Source string length in bytes. */ int flags; /* Conversion control flags. */ Tcl_EncodingState *statePtr;/* Place for conversion routine to store * state information used during a piecewise * conversion. Contents of statePtr are * initialized and/or reset by conversion * routine under control of flags argument. */ char *dst; /* Output buffer in which converted string * is stored. */ int dstLen; /* The maximum length of output buffer in * bytes. */ int *srcReadPtr; /* Filled with the number of bytes from the * source string that were converted. This * may be less than the original source length * if there was a problem converting some * source characters. */ int *dstWrotePtr; /* Filled with the number of bytes that were * stored in the output buffer as a result of * the conversion. */ int *dstCharsPtr; /* Filled with the number of characters that * correspond to the bytes stored in the * output buffer. */ { EscapeEncodingData *dataPtr; Encoding *encodingPtr; CONST char *srcStart, *srcEnd, *srcClose; char *dstStart, *dstEnd; int state, result, numChars; TableEncodingData *tableDataPtr; char *tablePrefixBytes; unsigned short **tableFromUnicode; result = TCL_OK; dataPtr = (EscapeEncodingData *) clientData; srcStart = src; srcEnd = src + srcLen; srcClose = srcEnd; if ((flags & TCL_ENCODING_END) == 0) { srcClose -= TCL_UTF_MAX; } dstStart = dst; dstEnd = dst + dstLen - 1; /* * RFC1468 states that the text starts in ASCII, and switches to Japanese * characters, and that the text must end in ASCII. [Patch #474358] */ if (flags & TCL_ENCODING_START) { state = 0; if (dst + dataPtr->initLen > dstEnd) { *srcReadPtr = 0; *dstWrotePtr = 0; return TCL_CONVERT_NOSPACE; } memcpy((VOID *) dst, (VOID *) dataPtr->init, (size_t) dataPtr->initLen); dst += dataPtr->initLen; } else { state = (int) *statePtr; } encodingPtr = GetTableEncoding(dataPtr, state); tableDataPtr = (TableEncodingData *) encodingPtr->clientData; tablePrefixBytes = tableDataPtr->prefixBytes; tableFromUnicode = tableDataPtr->fromUnicode; for (numChars = 0; src < srcEnd; numChars++) { unsigned int len; int word; Tcl_UniChar ch; if ((src > srcClose) && (!Tcl_UtfCharComplete(src, srcEnd - src))) { /* * If there is more string to follow, this will ensure that the * last UTF-8 character in the source buffer hasn't been cut off. */ result = TCL_CONVERT_MULTIBYTE; break; } len = TclUtfToUniChar(src, &ch); word = tableFromUnicode[(ch >> 8)][ch & 0xff]; if ((word == 0) && (ch != 0)) { int oldState; EscapeSubTable *subTablePtr; oldState = state; for (state = 0; state < dataPtr->numSubTables; state++) { encodingPtr = GetTableEncoding(dataPtr, state); tableDataPtr = (TableEncodingData *) encodingPtr->clientData; word = tableDataPtr->fromUnicode[(ch >> 8)][ch & 0xff]; if (word != 0) { break; } } if (word == 0) { state = oldState; if (flags & TCL_ENCODING_STOPONERROR) { result = TCL_CONVERT_UNKNOWN; break; } encodingPtr = GetTableEncoding(dataPtr, state); tableDataPtr = (TableEncodingData *) encodingPtr->clientData; word = tableDataPtr->fallback; } tablePrefixBytes = tableDataPtr->prefixBytes; tableFromUnicode = tableDataPtr->fromUnicode; /* * The state variable has the value of oldState when word is 0. * In this case, the escape sequense should not be copied to dst * because the current character set is not changed. */ if (state != oldState) { subTablePtr = &dataPtr->subTables[state]; if ((dst + subTablePtr->sequenceLen) > dstEnd) { /* * If there is no space to write the escape sequence, the * state variable must be changed to the value of oldState * variable because this escape sequence must be written * in the next conversion. */ state = oldState; result = TCL_CONVERT_NOSPACE; break; } memcpy((VOID *) dst, (VOID *) subTablePtr->sequence, (size_t) subTablePtr->sequenceLen); dst += subTablePtr->sequenceLen; } } if (tablePrefixBytes[(word >> 8)] != 0) { if (dst + 1 > dstEnd) { result = TCL_CONVERT_NOSPACE; break; } dst[0] = (char) (word >> 8); dst[1] = (char) word; dst += 2; } else { if (dst > dstEnd) { result = TCL_CONVERT_NOSPACE; break; } dst[0] = (char) word; dst++; } src += len; } if ((result == TCL_OK) && (flags & TCL_ENCODING_END)) { unsigned int len = dataPtr->subTables[0].sequenceLen; if (dst + dataPtr->finalLen + (state?len:0) > dstEnd) { result = TCL_CONVERT_NOSPACE; } else { if (state) { memcpy((VOID *) dst, (VOID *) dataPtr->subTables[0].sequence, (size_t) len); dst += len; } memcpy((VOID *) dst, (VOID *) dataPtr->final, (size_t) dataPtr->finalLen); dst += dataPtr->finalLen; } } *statePtr = (Tcl_EncodingState) state; *srcReadPtr = src - srcStart; *dstWrotePtr = dst - dstStart; *dstCharsPtr = numChars; return result; } /* *--------------------------------------------------------------------------- * * EscapeFreeProc -- * * This procedure is invoked when an EscapeEncodingData encoding is * deleted. It deletes the memory used by the encoding. * * Results: * None. * * Side effects: * Memory freed. * *--------------------------------------------------------------------------- */ static void EscapeFreeProc(clientData) ClientData clientData; /* EscapeEncodingData that specifies encoding. */ { EscapeEncodingData *dataPtr; EscapeSubTable *subTablePtr; int i; dataPtr = (EscapeEncodingData *) clientData; if (dataPtr == NULL) { return; } subTablePtr = dataPtr->subTables; for (i = 0; i < dataPtr->numSubTables; i++) { FreeEncoding((Tcl_Encoding) subTablePtr->encodingPtr); subTablePtr++; } ckfree((char *) dataPtr); } /* *--------------------------------------------------------------------------- * * GetTableEncoding -- * * Helper function for the EscapeEncodingData conversions. Gets the * encoding (of type TextEncodingData) that represents the specified * state. * * Results: * The return value is the encoding. * * Side effects: * If the encoding that represents the specified state has not * already been used by this EscapeEncoding, it will be loaded * and cached in the dataPtr. * *--------------------------------------------------------------------------- */ static Encoding * GetTableEncoding(dataPtr, state) EscapeEncodingData *dataPtr;/* Contains names of encodings. */ int state; /* Index in dataPtr of desired Encoding. */ { EscapeSubTable *subTablePtr; Encoding *encodingPtr; subTablePtr = &dataPtr->subTables[state]; encodingPtr = subTablePtr->encodingPtr; if (encodingPtr == NULL) { encodingPtr = (Encoding *) Tcl_GetEncoding(NULL, subTablePtr->name); if ((encodingPtr == NULL) || (encodingPtr->toUtfProc != TableToUtfProc)) { panic("EscapeToUtfProc: invalid sub table"); } subTablePtr->encodingPtr = encodingPtr; } return encodingPtr; } /* *--------------------------------------------------------------------------- * * unilen -- * * A helper function for the Tcl_ExternalToUtf functions. This * function is similar to strlen for double-byte characters: it * returns the number of bytes in a 0x0000 terminated string. * * Results: * As above. * * Side effects: * None. * *--------------------------------------------------------------------------- */ static size_t unilen(src) CONST char *src; { unsigned short *p; p = (unsigned short *) src; while (*p != 0x0000) { p++; } return (char *) p - src; } /* *------------------------------------------------------------------------- * * TclFindEncodings -- * * Find and load the encoding file for this operating system. * Before this is called, Tcl makes assumptions about the * native string representation, but the true encoding is not * assured. * * Results: * Return result of TclpInitLibraryPath, which reports whether the * path is clean (0) or dirty (1) UTF. * * Side effects: * Varied, see the respective initialization routines. * *------------------------------------------------------------------------- */ int TclFindEncodings(argv0) CONST char *argv0; /* Name of executable from argv[0] to main() * in native multi-byte encoding. */ { int mustCleanUtf = 0; if (encodingsInitialized == 0) { /* * Double check inside the mutex. There may be calls * back into this routine from some of the procedures below. */ TclpInitLock(); if (encodingsInitialized == 0) { char *native; Tcl_Obj *pathPtr; Tcl_DString libPath, buffer; /* * Have to set this bit here to avoid deadlock with the * routines below us that call into TclInitSubsystems. */ encodingsInitialized = 1; native = TclpFindExecutable(argv0); mustCleanUtf = TclpInitLibraryPath(native); /* * The library path was set in the TclpInitLibraryPath routine. * The string set is a dirty UTF string. To preserve the value * convert the UTF string back to native before setting the new * default encoding. */ pathPtr = TclGetLibraryPath(); if ((pathPtr != NULL) && mustCleanUtf) { Tcl_UtfToExternalDString(NULL, Tcl_GetString(pathPtr), -1, &libPath); } TclpSetInitialEncodings(); /* * Now convert the native string back to UTF. */ if ((pathPtr != NULL) && mustCleanUtf) { Tcl_ExternalToUtfDString(NULL, Tcl_DStringValue(&libPath), -1, &buffer); pathPtr = Tcl_NewStringObj(Tcl_DStringValue(&buffer), -1); TclSetLibraryPath(pathPtr); Tcl_DStringFree(&libPath); Tcl_DStringFree(&buffer); } } TclpInitUnlock(); } return mustCleanUtf; }