/* * tclFileName.c -- * * This file contains routines for converting file names betwen * native and network form. * * Copyright (c) 1995-1998 Sun Microsystems, Inc. * Copyright (c) 1998-1999 by Scriptics Corporation. * * See the file "license.terms" for information on usage and redistribution * of this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tclFileName.c,v 1.65 2005/03/15 18:39:38 vincentdarley Exp $ */ #include "tclInt.h" #include "tclRegexp.h" #include "tclFileSystem.h" /* For TclGetPathType() */ /* * The following variable is set in the TclPlatformInit call to one * of: TCL_PLATFORM_UNIX or TCL_PLATFORM_WINDOWS. */ TclPlatformType tclPlatform = TCL_PLATFORM_UNIX; /* * Prototypes for local procedures defined in this file: */ static CONST char * DoTildeSubst _ANSI_ARGS_((Tcl_Interp *interp, CONST char *user, Tcl_DString *resultPtr)); static CONST char * ExtractWinRoot _ANSI_ARGS_((CONST char *path, Tcl_DString *resultPtr, int offset, Tcl_PathType *typePtr)); static int SkipToChar _ANSI_ARGS_((char **stringPtr, int match)); static Tcl_Obj* SplitWinPath _ANSI_ARGS_((CONST char *path)); static Tcl_Obj* SplitUnixPath _ANSI_ARGS_((CONST char *path)); static int DoGlob _ANSI_ARGS_((Tcl_Interp *interp, Tcl_Obj *resultPtr, char *separators, Tcl_Obj *pathPtr, int flags, char *pattern, Tcl_GlobTypeData *types)); /* *---------------------------------------------------------------------- * * ExtractWinRoot -- * * Matches the root portion of a Windows path and appends it * to the specified Tcl_DString. * * Results: * Returns the position in the path immediately after the root * including any trailing slashes. * Appends a cleaned up version of the root to the Tcl_DString * at the specified offest. * * Side effects: * Modifies the specified Tcl_DString. * *---------------------------------------------------------------------- */ static CONST char * ExtractWinRoot(path, resultPtr, offset, typePtr) CONST char *path; /* Path to parse. */ Tcl_DString *resultPtr; /* Buffer to hold result. */ int offset; /* Offset in buffer where result should be * stored. */ Tcl_PathType *typePtr; /* Where to store pathType result */ { if (path[0] == '/' || path[0] == '\\') { /* Might be a UNC or Vol-Relative path */ CONST char *host, *share, *tail; int hlen, slen; if (path[1] != '/' && path[1] != '\\') { Tcl_DStringSetLength(resultPtr, offset); *typePtr = TCL_PATH_VOLUME_RELATIVE; Tcl_DStringAppend(resultPtr, "/", 1); return &path[1]; } host = &path[2]; /* Skip separators */ while (host[0] == '/' || host[0] == '\\') { host++; } for (hlen = 0; host[hlen];hlen++) { if (host[hlen] == '/' || host[hlen] == '\\') { break; } } if (host[hlen] == 0 || host[hlen+1] == 0) { /* * The path given is simply of the form * '/foo', '//foo', '/////foo' or the same * with backslashes. If there is exactly * one leading '/' the path is volume relative * (see filename man page). If there are more * than one, we are simply assuming they * are superfluous and we trim them away. * (An alternative interpretation would * be that it is a host name, but we have * been documented that that is not the case). */ *typePtr = TCL_PATH_VOLUME_RELATIVE; Tcl_DStringAppend(resultPtr, "/", 1); return &path[2]; } Tcl_DStringSetLength(resultPtr, offset); share = &host[hlen]; /* Skip separators */ while (share[0] == '/' || share[0] == '\\') { share++; } for (slen=0; share[slen]; slen++) { if (share[slen] == '/' || share[slen] == '\\') { break; } } Tcl_DStringAppend(resultPtr, "//", 2); Tcl_DStringAppend(resultPtr, host, hlen); Tcl_DStringAppend(resultPtr, "/", 1); Tcl_DStringAppend(resultPtr, share, slen); tail = &share[slen]; /* Skip separators */ while (tail[0] == '/' || tail[0] == '\\') { tail++; } *typePtr = TCL_PATH_ABSOLUTE; return tail; } else if (*path && path[1] == ':') { /* Might be a drive sep */ Tcl_DStringSetLength(resultPtr, offset); if (path[2] != '/' && path[2] != '\\') { *typePtr = TCL_PATH_VOLUME_RELATIVE; Tcl_DStringAppend(resultPtr, path, 2); return &path[2]; } else { char *tail = (char*)&path[3]; /* Skip separators */ while (*tail && (tail[0] == '/' || tail[0] == '\\')) { tail++; } *typePtr = TCL_PATH_ABSOLUTE; Tcl_DStringAppend(resultPtr, path, 2); Tcl_DStringAppend(resultPtr, "/", 1); return tail; } } else { int abs = 0; if ((path[0] == 'c' || path[0] == 'C') && (path[1] == 'o' || path[1] == 'O')) { if ((path[2] == 'm' || path[2] == 'M') && path[3] >= '1' && path[3] <= '4') { /* May have match for 'com[1-4]:?', which is a serial port */ if (path[4] == '\0') { abs = 4; } else if (path [4] == ':' && path[5] == '\0') { abs = 5; } } else if ((path[2] == 'n' || path[2] == 'N') && path[3] == '\0') { /* Have match for 'con' */ abs = 3; } } else if ((path[0] == 'l' || path[0] == 'L') && (path[1] == 'p' || path[1] == 'P') && (path[2] == 't' || path[2] == 'T')) { if (path[3] >= '1' && path[3] <= '3') { /* May have match for 'lpt[1-3]:?' */ if (path[4] == '\0') { abs = 4; } else if (path [4] == ':' && path[5] == '\0') { abs = 5; } } } else if ((path[0] == 'p' || path[0] == 'P') && (path[1] == 'r' || path[1] == 'R') && (path[2] == 'n' || path[2] == 'N')) /* Have match for 'prn' */ abs = 3; } else if ((path[0] == 'n' || path[0] == 'N') && (path[1] == 'u' || path[1] == 'U') && (path[2] == 'l' || path[2] == 'L')) /* Have match for 'nul' */ abs = 3; } else if ((path[0] == 'a' || path[0] == 'A') && (path[1] == 'u' || path[1] == 'U') && (path[2] == 'x' || path[2] == 'X')) /* Have match for 'aux' */ abs = 3; } if (abs != 0) { *typePtr = TCL_PATH_ABSOLUTE; Tcl_DStringSetLength(resultPtr, offset); Tcl_DStringAppend(resultPtr, path, abs); return path + abs; } } /* Anything else is treated as relative */ *typePtr = TCL_PATH_RELATIVE; return path; } /* *---------------------------------------------------------------------- * * Tcl_GetPathType -- * * Determines whether a given path is relative to the current * directory, relative to the current volume, or absolute. * * The objectified Tcl_FSGetPathType should be used in * preference to this function (as you can see below, this * is just a wrapper around that other function). * * Results: * Returns one of TCL_PATH_ABSOLUTE, TCL_PATH_RELATIVE, or * TCL_PATH_VOLUME_RELATIVE. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_PathType Tcl_GetPathType(path) CONST char *path; { Tcl_PathType type; Tcl_Obj *tempObj = Tcl_NewStringObj(path,-1); Tcl_IncrRefCount(tempObj); type = Tcl_FSGetPathType(tempObj); Tcl_DecrRefCount(tempObj); return type; } /* *---------------------------------------------------------------------- * * TclpGetNativePathType -- * * Determines whether a given path is relative to the current * directory, relative to the current volume, or absolute, but * ONLY FOR THE NATIVE FILESYSTEM. This function is called from * tclIOUtil.c (but needs to be here due to its dependence on * static variables/functions in this file). The exported * function Tcl_FSGetPathType should be used by extensions. * * Note that '~' paths are always considered TCL_PATH_ABSOLUTE, * even though expanding the '~' could lead to any possible * path type. This function should therefore be considered a * low-level, string-manipulation function only -- it doesn't * actually do any expansion in making its determination. * * Results: * Returns one of TCL_PATH_ABSOLUTE, TCL_PATH_RELATIVE, or * TCL_PATH_VOLUME_RELATIVE. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_PathType TclpGetNativePathType(pathPtr, driveNameLengthPtr, driveNameRef) Tcl_Obj *pathPtr; /* Native path of interest */ int *driveNameLengthPtr; /* Returns length of drive, if non-NULL * and path was absolute */ Tcl_Obj **driveNameRef; { Tcl_PathType type = TCL_PATH_ABSOLUTE; int pathLen; char *path = Tcl_GetStringFromObj(pathPtr, &pathLen); if (path[0] == '~') { /* * This case is common to all platforms. * Paths that begin with ~ are absolute. */ if (driveNameLengthPtr != NULL) { char *end = path + 1; while ((*end != '\0') && (*end != '/')) { end++; } *driveNameLengthPtr = end - path; } } else { switch (tclPlatform) { case TCL_PLATFORM_UNIX: { char *origPath = path; /* * Paths that begin with / are absolute. */ #ifdef __QNX__ /* * Check for QNX // prefix */ if (*path && (pathLen > 3) && (path[0] == '/') && (path[1] == '/') && isdigit(UCHAR(path[2]))) { path += 3; while (isdigit(UCHAR(*path))) { ++path; } } #endif if (path[0] == '/') { if (driveNameLengthPtr != NULL) { /* * We need this addition in case the QNX code * was used */ *driveNameLengthPtr = (1 + path - origPath); } } else { type = TCL_PATH_RELATIVE; } break; } case TCL_PLATFORM_WINDOWS: { Tcl_DString ds; CONST char *rootEnd; Tcl_DStringInit(&ds); rootEnd = ExtractWinRoot(path, &ds, 0, &type); if ((rootEnd != path) && (driveNameLengthPtr != NULL)) { *driveNameLengthPtr = rootEnd - path; if (driveNameRef != NULL) { *driveNameRef = Tcl_NewStringObj(Tcl_DStringValue(&ds), Tcl_DStringLength(&ds)); Tcl_IncrRefCount(*driveNameRef); } } Tcl_DStringFree(&ds); break; } } } return type; } /* *--------------------------------------------------------------------------- * * TclpNativeSplitPath -- * * This function takes the given Tcl_Obj, which should be a valid * path, and returns a Tcl List object containing each segment * of that path as an element. * * Note this function currently calls the older Split(Plat)Path * functions, which require more memory allocation than is * desirable. * * Results: * Returns list object with refCount of zero. If the passed in * lenPtr is non-NULL, we use it to return the number of elements * in the returned list. * * Side effects: * None. * *--------------------------------------------------------------------------- */ Tcl_Obj* TclpNativeSplitPath(pathPtr, lenPtr) Tcl_Obj *pathPtr; /* Path to split. */ int *lenPtr; /* int to store number of path elements. */ { Tcl_Obj *resultPtr = NULL; /* Needed only to prevent gcc warnings. */ /* * Perform platform specific splitting. */ switch (tclPlatform) { case TCL_PLATFORM_UNIX: resultPtr = SplitUnixPath(Tcl_GetString(pathPtr)); break; case TCL_PLATFORM_WINDOWS: resultPtr = SplitWinPath(Tcl_GetString(pathPtr)); break; } /* * Compute the number of elements in the result. */ if (lenPtr != NULL) { Tcl_ListObjLength(NULL, resultPtr, lenPtr); } return resultPtr; } /* *---------------------------------------------------------------------- * * Tcl_SplitPath -- * * Split a path into a list of path components. The first element * of the list will have the same path type as the original path. * * Results: * Returns a standard Tcl result. The interpreter result contains * a list of path components. * *argvPtr will be filled in with the address of an array * whose elements point to the elements of path, in order. * *argcPtr will get filled in with the number of valid elements * in the array. A single block of memory is dynamically allocated * to hold both the argv array and a copy of the path elements. * The caller must eventually free this memory by calling ckfree() * on *argvPtr. Note: *argvPtr and *argcPtr are only modified * if the procedure returns normally. * * Side effects: * Allocates memory. * *---------------------------------------------------------------------- */ void Tcl_SplitPath(path, argcPtr, argvPtr) CONST char *path; /* Pointer to string containing a path. */ int *argcPtr; /* Pointer to location to fill in with * the number of elements in the path. */ CONST char ***argvPtr; /* Pointer to place to store pointer to array * of pointers to path elements. */ { Tcl_Obj *resultPtr = NULL; /* Needed only to prevent gcc warnings. */ Tcl_Obj *tmpPtr, *eltPtr; int i, size, len; char *p, *str; /* * Perform the splitting, using objectified, vfs-aware code. */ tmpPtr = Tcl_NewStringObj(path, -1); Tcl_IncrRefCount(tmpPtr); resultPtr = Tcl_FSSplitPath(tmpPtr, argcPtr); Tcl_IncrRefCount(resultPtr); Tcl_DecrRefCount(tmpPtr); /* Calculate space required for the result */ size = 1; for (i = 0; i < *argcPtr; i++) { Tcl_ListObjIndex(NULL, resultPtr, i, &eltPtr); Tcl_GetStringFromObj(eltPtr, &len); size += len + 1; } /* * Allocate a buffer large enough to hold the contents of all of * the list plus the argv pointers and the terminating NULL pointer. */ *argvPtr = (CONST char **) ckalloc((unsigned) ((((*argcPtr) + 1) * sizeof(char *)) + size)); /* * Position p after the last argv pointer and copy the contents of * the list in, piece by piece. */ p = (char *) &(*argvPtr)[(*argcPtr) + 1]; for (i = 0; i < *argcPtr; i++) { Tcl_ListObjIndex(NULL, resultPtr, i, &eltPtr); str = Tcl_GetStringFromObj(eltPtr, &len); memcpy((VOID *) p, (VOID *) str, (size_t) len+1); p += len+1; } /* * Now set up the argv pointers. */ p = (char *) &(*argvPtr)[(*argcPtr) + 1]; for (i = 0; i < *argcPtr; i++) { (*argvPtr)[i] = p; for (; *(p++)!='\0'; ); } (*argvPtr)[i] = NULL; /* * Free the result ptr given to us by Tcl_FSSplitPath */ Tcl_DecrRefCount(resultPtr); } /* *---------------------------------------------------------------------- * * SplitUnixPath -- * * This routine is used by Tcl_(FS)SplitPath to handle splitting * Unix paths. * * Results: * Returns a newly allocated Tcl list object. * * Side effects: * None. * *---------------------------------------------------------------------- */ static Tcl_Obj* SplitUnixPath(path) CONST char *path; /* Pointer to string containing a path. */ { int length; CONST char *p, *elementStart; Tcl_Obj *result = Tcl_NewObj(); /* * Deal with the root directory as a special case. */ #ifdef __QNX__ /* * Check for QNX // prefix */ if ((path[0] == '/') && (path[1] == '/') && isdigit(UCHAR(path[2]))) { /* INTL: digit */ path += 3; while (isdigit(UCHAR(*path))) { /* INTL: digit */ ++path; } } #endif if (path[0] == '/') { Tcl_ListObjAppendElement(NULL, result, Tcl_NewStringObj("/",1)); p = path+1; } else { p = path; } /* * Split on slashes. Embedded elements that start with tilde will be * prefixed with "./" so they are not affected by tilde substitution. */ for (;;) { elementStart = p; while ((*p != '\0') && (*p != '/')) { p++; } length = p - elementStart; if (length > 0) { Tcl_Obj *nextElt; if ((elementStart[0] == '~') && (elementStart != path)) { nextElt = Tcl_NewStringObj("./",2); Tcl_AppendToObj(nextElt, elementStart, length); } else { nextElt = Tcl_NewStringObj(elementStart, length); } Tcl_ListObjAppendElement(NULL, result, nextElt); } if (*p++ == '\0') { break; } } return result; } /* *---------------------------------------------------------------------- * * SplitWinPath -- * * This routine is used by Tcl_(FS)SplitPath to handle splitting * Windows paths. * * Results: * Returns a newly allocated Tcl list object. * * Side effects: * None. * *---------------------------------------------------------------------- */ static Tcl_Obj* SplitWinPath(path) CONST char *path; /* Pointer to string containing a path. */ { int length; CONST char *p, *elementStart; Tcl_PathType type = TCL_PATH_ABSOLUTE; Tcl_DString buf; Tcl_Obj *result = Tcl_NewObj(); Tcl_DStringInit(&buf); p = ExtractWinRoot(path, &buf, 0, &type); /* * Terminate the root portion, if we matched something. */ if (p != path) { Tcl_ListObjAppendElement(NULL, result, Tcl_NewStringObj( Tcl_DStringValue(&buf), Tcl_DStringLength(&buf))); } Tcl_DStringFree(&buf); /* * Split on slashes. Embedded elements that start with tilde will be * prefixed with "./" so they are not affected by tilde substitution. */ do { elementStart = p; while ((*p != '\0') && (*p != '/') && (*p != '\\')) { p++; } length = p - elementStart; if (length > 0) { Tcl_Obj *nextElt; if ((elementStart[0] == '~') && (elementStart != path)) { nextElt = Tcl_NewStringObj("./",2); Tcl_AppendToObj(nextElt, elementStart, length); } else { nextElt = Tcl_NewStringObj(elementStart, length); } Tcl_ListObjAppendElement(NULL, result, nextElt); } } while (*p++ != '\0'); return result; } /* *--------------------------------------------------------------------------- * * Tcl_FSJoinToPath -- * * This function takes the given object, which should usually be a * valid path or NULL, and joins onto it the array of paths * segments given. * * The objects in the array given will temporarily have their * refCount increased by one, and then decreased by one when this * function exits (which means if they had zero refCount when we * were called, they will be freed). * * Results: * Returns object owned by the caller (which should increment its * refCount) - typically an object with refCount of zero. * * Side effects: * None. * *--------------------------------------------------------------------------- */ Tcl_Obj* Tcl_FSJoinToPath(pathPtr, objc, objv) Tcl_Obj *pathPtr; /* Valid path or NULL. */ int objc; /* Number of array elements to join */ Tcl_Obj *CONST objv[]; /* Path elements to join. */ { int i; Tcl_Obj *lobj, *ret; if (pathPtr == NULL) { lobj = Tcl_NewListObj(0, NULL); } else { lobj = Tcl_NewListObj(1, &pathPtr); } for (i = 0; irefCount--; return ret; } /* *--------------------------------------------------------------------------- * * TclpNativeJoinPath -- * * 'prefix' is absolute, 'joining' is relative to prefix. * * Results: * modifies prefix * * Side effects: * None. * *--------------------------------------------------------------------------- */ void TclpNativeJoinPath(prefix, joining) Tcl_Obj *prefix; char* joining; { int length, needsSep; char *dest, *p, *start; start = Tcl_GetStringFromObj(prefix, &length); /* * Remove the ./ from tilde prefixed elements unless * it is the first component. */ p = joining; if (length != 0) { if ((p[0] == '.') && (p[1] == '/') && (p[2] == '~')) { p += 2; } } if (*p == '\0') { return; } switch (tclPlatform) { case TCL_PLATFORM_UNIX: /* * Append a separator if needed. */ if (length > 0 && (start[length-1] != '/')) { Tcl_AppendToObj(prefix, "/", 1); length++; } needsSep = 0; /* * Append the element, eliminating duplicate and trailing * slashes. */ Tcl_SetObjLength(prefix, length + (int) strlen(p)); dest = Tcl_GetString(prefix) + length; for (; *p != '\0'; p++) { if (*p == '/') { while (p[1] == '/') { p++; } if (p[1] != '\0' && needsSep) { *dest++ = '/'; } } else { *dest++ = *p; needsSep = 1; } } length = dest - Tcl_GetString(prefix); Tcl_SetObjLength(prefix, length); break; case TCL_PLATFORM_WINDOWS: /* * Check to see if we need to append a separator. */ if ((length > 0) && (start[length-1] != '/') && (start[length-1] != ':')) { Tcl_AppendToObj(prefix, "/", 1); length++; } needsSep = 0; /* * Append the element, eliminating duplicate and * trailing slashes. */ Tcl_SetObjLength(prefix, length + (int) strlen(p)); dest = Tcl_GetString(prefix) + length; for (; *p != '\0'; p++) { if ((*p == '/') || (*p == '\\')) { while ((p[1] == '/') || (p[1] == '\\')) { p++; } if ((p[1] != '\0') && needsSep) { *dest++ = '/'; } } else { *dest++ = *p; needsSep = 1; } } length = dest - Tcl_GetString(prefix); Tcl_SetObjLength(prefix, length); break; } return; } /* *---------------------------------------------------------------------- * * Tcl_JoinPath -- * * Combine a list of paths in a platform specific manner. The * function 'Tcl_FSJoinPath' should be used in preference where * possible. * * Results: * Appends the joined path to the end of the specified * Tcl_DString returning a pointer to the resulting string. Note * that the Tcl_DString must already be initialized. * * Side effects: * Modifies the Tcl_DString. * *---------------------------------------------------------------------- */ char * Tcl_JoinPath(argc, argv, resultPtr) int argc; CONST char * CONST *argv; Tcl_DString *resultPtr; /* Pointer to previously initialized DString */ { int i, len; Tcl_Obj *listObj = Tcl_NewObj(); Tcl_Obj *resultObj; char *resultStr; /* Build the list of paths */ for (i = 0; i < argc; i++) { Tcl_ListObjAppendElement(NULL, listObj, Tcl_NewStringObj(argv[i], -1)); } /* Ask the objectified code to join the paths */ Tcl_IncrRefCount(listObj); resultObj = Tcl_FSJoinPath(listObj, argc); Tcl_IncrRefCount(resultObj); Tcl_DecrRefCount(listObj); /* Store the result */ resultStr = Tcl_GetStringFromObj(resultObj, &len); Tcl_DStringAppend(resultPtr, resultStr, len); Tcl_DecrRefCount(resultObj); /* Return a pointer to the result */ return Tcl_DStringValue(resultPtr); } /* *--------------------------------------------------------------------------- * * Tcl_TranslateFileName -- * * Converts a file name into a form usable by the native system * interfaces. If the name starts with a tilde, it will produce a * name where the tilde and following characters have been replaced * by the home directory location for the named user. * * Results: * The return value is a pointer to a string containing the name * after tilde substitution. If there was no tilde substitution, * the return value is a pointer to a copy of the original string. * If there was an error in processing the name, then an error * message is left in the interp's result (if interp was not NULL) * and the return value is NULL. Space for the return value is * allocated in bufferPtr; the caller must call Tcl_DStringFree() * to free the space if the return value was not NULL. * * Side effects: * None. * *---------------------------------------------------------------------- */ char * Tcl_TranslateFileName(interp, name, bufferPtr) Tcl_Interp *interp; /* Interpreter in which to store error * message (if necessary). */ CONST char *name; /* File name, which may begin with "~" (to * indicate current user's home directory) or * "~" (to indicate any user's home * directory). */ Tcl_DString *bufferPtr; /* Uninitialized or free DString filled * with name after tilde substitution. */ { Tcl_Obj *path = Tcl_NewStringObj(name, -1); Tcl_Obj *transPtr; Tcl_IncrRefCount(path); transPtr = Tcl_FSGetTranslatedPath(interp, path); if (transPtr == NULL) { Tcl_DecrRefCount(path); return NULL; } Tcl_DStringInit(bufferPtr); Tcl_DStringAppend(bufferPtr, Tcl_GetString(transPtr), -1); Tcl_DecrRefCount(path); Tcl_DecrRefCount(transPtr); /* * Convert forward slashes to backslashes in Windows paths because * some system interfaces don't accept forward slashes. */ if (tclPlatform == TCL_PLATFORM_WINDOWS) { register char *p; for (p = Tcl_DStringValue(bufferPtr); *p != '\0'; p++) { if (*p == '/') { *p = '\\'; } } } return Tcl_DStringValue(bufferPtr); } /* *---------------------------------------------------------------------- * * TclGetExtension -- * * This function returns a pointer to the beginning of the * extension part of a file name. * * Results: * Returns a pointer into name which indicates where the extension * starts. If there is no extension, returns NULL. * * Side effects: * None. * *---------------------------------------------------------------------- */ CONST char * TclGetExtension(name) CONST char *name; /* File name to parse. */ { CONST char *p, *lastSep; /* * First find the last directory separator. */ lastSep = NULL; /* Needed only to prevent gcc warnings. */ switch (tclPlatform) { case TCL_PLATFORM_UNIX: lastSep = strrchr(name, '/'); break; case TCL_PLATFORM_WINDOWS: lastSep = NULL; for (p = name; *p != '\0'; p++) { if (strchr("/\\:", *p) != NULL) { lastSep = p; } } break; } p = strrchr(name, '.'); if ((p != NULL) && (lastSep != NULL) && (lastSep > p)) { p = NULL; } /* * In earlier versions, we used to back up to the first period in a series * so that "foo..o" would be split into "foo" and "..o". This is a * confusing and usually incorrect behavior, so now we split at the last * period in the name. */ return p; } /* *---------------------------------------------------------------------- * * DoTildeSubst -- * * Given a string following a tilde, this routine returns the * corresponding home directory. * * Results: * The result is a pointer to a static string containing the home * directory in native format. If there was an error in processing * the substitution, then an error message is left in the interp's * result and the return value is NULL. On success, the results * are appended to resultPtr, and the contents of resultPtr are * returned. * * Side effects: * Information may be left in resultPtr. * *---------------------------------------------------------------------- */ static CONST char * DoTildeSubst(interp, user, resultPtr) Tcl_Interp *interp; /* Interpreter in which to store error * message (if necessary). */ CONST char *user; /* Name of user whose home directory should be * substituted, or "" for current user. */ Tcl_DString *resultPtr; /* Initialized DString filled with name * after tilde substitution. */ { CONST char *dir; if (*user == '\0') { Tcl_DString dirString; dir = TclGetEnv("HOME", &dirString); if (dir == NULL) { if (interp) { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "couldn't find HOME environment ", "variable to expand path", (char *) NULL); } return NULL; } Tcl_JoinPath(1, &dir, resultPtr); Tcl_DStringFree(&dirString); } else if (TclpGetUserHome(user, resultPtr) == NULL) { if (interp) { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "user \"", user, "\" doesn't exist", (char *) NULL); } return NULL; } return Tcl_DStringValue(resultPtr); } /* *---------------------------------------------------------------------- * * Tcl_GlobObjCmd -- * * This procedure is invoked to process the "glob" Tcl command. * See the user documentation for details on what it does. * * Results: * A standard Tcl result. * * Side effects: * See the user documentation. * *---------------------------------------------------------------------- */ /* ARGSUSED */ int Tcl_GlobObjCmd(dummy, interp, objc, objv) ClientData dummy; /* Not used. */ Tcl_Interp *interp; /* Current interpreter. */ int objc; /* Number of arguments. */ Tcl_Obj *CONST objv[]; /* Argument objects. */ { int index, i, globFlags, length, join, dir, result; char *string, *separators; Tcl_Obj *typePtr, *resultPtr, *look; Tcl_Obj *pathOrDir = NULL; Tcl_DString prefix; static CONST char *options[] = { "-directory", "-join", "-nocomplain", "-path", "-tails", "-types", "--", NULL }; enum options { GLOB_DIR, GLOB_JOIN, GLOB_NOCOMPLAIN, GLOB_PATH, GLOB_TAILS, GLOB_TYPE, GLOB_LAST }; enum pathDirOptions {PATH_NONE = -1 , PATH_GENERAL = 0, PATH_DIR = 1}; Tcl_GlobTypeData *globTypes = NULL; globFlags = 0; join = 0; dir = PATH_NONE; typePtr = NULL; for (i = 1; i < objc; i++) { if (Tcl_GetIndexFromObj(interp, objv[i], options, "option", 0, &index) != TCL_OK) { string = Tcl_GetStringFromObj(objv[i], &length); if (string[0] == '-') { /* * It looks like the command contains an option so signal * an error */ return TCL_ERROR; } else { /* * This clearly isn't an option; assume it's the first * glob pattern. We must clear the error */ Tcl_ResetResult(interp); break; } } switch (index) { case GLOB_NOCOMPLAIN: /* -nocomplain */ globFlags |= TCL_GLOBMODE_NO_COMPLAIN; break; case GLOB_DIR: /* -dir */ if (i == (objc-1)) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "missing argument to \"-directory\"", -1)); return TCL_ERROR; } if (dir != PATH_NONE) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "\"-directory\" cannot be used with \"-path\"", -1)); return TCL_ERROR; } dir = PATH_DIR; globFlags |= TCL_GLOBMODE_DIR; pathOrDir = objv[i+1]; i++; break; case GLOB_JOIN: /* -join */ join = 1; break; case GLOB_TAILS: /* -tails */ globFlags |= TCL_GLOBMODE_TAILS; break; case GLOB_PATH: /* -path */ if (i == (objc-1)) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "missing argument to \"-path\"", -1)); return TCL_ERROR; } if (dir != PATH_NONE) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "\"-path\" cannot be used with \"-directory\"", -1)); return TCL_ERROR; } dir = PATH_GENERAL; pathOrDir = objv[i+1]; i++; break; case GLOB_TYPE: /* -types */ if (i == (objc-1)) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "missing argument to \"-types\"", -1)); return TCL_ERROR; } typePtr = objv[i+1]; if (Tcl_ListObjLength(interp, typePtr, &length) != TCL_OK) { return TCL_ERROR; } i++; break; case GLOB_LAST: /* -- */ i++; goto endOfForLoop; } } endOfForLoop: if (objc - i < 1) { Tcl_WrongNumArgs(interp, 1, objv, "?switches? name ?name ...?"); return TCL_ERROR; } if ((globFlags & TCL_GLOBMODE_TAILS) && (pathOrDir == NULL)) { Tcl_AppendResult(interp, "\"-tails\" must be used with either ", "\"-directory\" or \"-path\"", NULL); return TCL_ERROR; } separators = NULL; /* lint. */ switch (tclPlatform) { case TCL_PLATFORM_UNIX: separators = "/"; break; case TCL_PLATFORM_WINDOWS: separators = "/\\:"; break; } if (dir == PATH_GENERAL) { int pathlength; char *last; char *first = Tcl_GetStringFromObj(pathOrDir,&pathlength); /* * Find the last path separator in the path */ last = first + pathlength; for (; last != first; last--) { if (strchr(separators, *(last-1)) != NULL) { break; } } if (last == first + pathlength) { /* It's really a directory */ dir = PATH_DIR; } else { Tcl_DString pref; char *search, *find; Tcl_DStringInit(&pref); if (last == first) { /* * The whole thing is a prefix. This means we must * remove any 'tails' flag too, since it is irrelevant * now (the same effect will happen without it), but in * particular its use in TclGlob requires a non-NULL * pathOrDir. */ Tcl_DStringAppend(&pref, first, -1); globFlags &= ~TCL_GLOBMODE_TAILS; pathOrDir = NULL; } else { /* Have to split off the end */ Tcl_DStringAppend(&pref, last, first+pathlength-last); pathOrDir = Tcl_NewStringObj(first, last-first-1); /* * We must ensure that we haven't cut off too much, * and turned a valid path like '/' or 'C:/' into * an incorrect path like '' or 'C:'. The way we * do this is to add a separator if there are none * presently in the prefix. */ if (strpbrk(Tcl_GetString(pathOrDir), "\\/") == NULL) { Tcl_AppendToObj(pathOrDir, last-1, 1); } } /* Need to quote 'prefix' */ Tcl_DStringInit(&prefix); search = Tcl_DStringValue(&pref); while ((find = (strpbrk(search, "\\[]*?{}"))) != NULL) { Tcl_DStringAppend(&prefix, search, find-search); Tcl_DStringAppend(&prefix, "\\", 1); Tcl_DStringAppend(&prefix, find, 1); search = find+1; if (*search == '\0') { break; } } if (*search != '\0') { Tcl_DStringAppend(&prefix, search, -1); } Tcl_DStringFree(&pref); } } if (pathOrDir != NULL) { Tcl_IncrRefCount(pathOrDir); } if (typePtr != NULL) { /* * The rest of the possible type arguments (except 'd') are * platform specific. We don't complain when they are used * on an incompatible platform. */ Tcl_ListObjLength(interp, typePtr, &length); globTypes = (Tcl_GlobTypeData*) ckalloc(sizeof(Tcl_GlobTypeData)); globTypes->type = 0; globTypes->perm = 0; globTypes->macType = NULL; globTypes->macCreator = NULL; while (--length >= 0) { int len; char *str; Tcl_ListObjIndex(interp, typePtr, length, &look); str = Tcl_GetStringFromObj(look, &len); if (strcmp("readonly", str) == 0) { globTypes->perm |= TCL_GLOB_PERM_RONLY; } else if (strcmp("hidden", str) == 0) { globTypes->perm |= TCL_GLOB_PERM_HIDDEN; } else if (len == 1) { switch (str[0]) { case 'r': globTypes->perm |= TCL_GLOB_PERM_R; break; case 'w': globTypes->perm |= TCL_GLOB_PERM_W; break; case 'x': globTypes->perm |= TCL_GLOB_PERM_X; break; case 'b': globTypes->type |= TCL_GLOB_TYPE_BLOCK; break; case 'c': globTypes->type |= TCL_GLOB_TYPE_CHAR; break; case 'd': globTypes->type |= TCL_GLOB_TYPE_DIR; break; case 'p': globTypes->type |= TCL_GLOB_TYPE_PIPE; break; case 'f': globTypes->type |= TCL_GLOB_TYPE_FILE; break; case 'l': globTypes->type |= TCL_GLOB_TYPE_LINK; break; case 's': globTypes->type |= TCL_GLOB_TYPE_SOCK; break; default: goto badTypesArg; } } else if (len == 4) { /* This is assumed to be a MacOS file type */ if (globTypes->macType != NULL) { goto badMacTypesArg; } globTypes->macType = look; Tcl_IncrRefCount(look); } else { Tcl_Obj* item; if ((Tcl_ListObjLength(NULL, look, &len) == TCL_OK) && (len == 3)) { Tcl_ListObjIndex(interp, look, 0, &item); if (!strcmp("macintosh", Tcl_GetString(item))) { Tcl_ListObjIndex(interp, look, 1, &item); if (!strcmp("type", Tcl_GetString(item))) { Tcl_ListObjIndex(interp, look, 2, &item); if (globTypes->macType != NULL) { goto badMacTypesArg; } globTypes->macType = item; Tcl_IncrRefCount(item); continue; } else if (!strcmp("creator", Tcl_GetString(item))) { Tcl_ListObjIndex(interp, look, 2, &item); if (globTypes->macCreator != NULL) { goto badMacTypesArg; } globTypes->macCreator = item; Tcl_IncrRefCount(item); continue; } } } /* * Error cases. We reset * the 'join' flag to zero, since we haven't yet * made use of it. */ badTypesArg: TclNewObj(resultPtr); Tcl_AppendToObj(resultPtr, "bad argument to \"-types\": ", -1); Tcl_AppendObjToObj(resultPtr, look); Tcl_SetObjResult(interp, resultPtr); result = TCL_ERROR; join = 0; goto endOfGlob; badMacTypesArg: Tcl_SetObjResult(interp, Tcl_NewStringObj( "only one MacOS type or creator argument" " to \"-types\" allowed", -1)); result = TCL_ERROR; join = 0; goto endOfGlob; } } } /* * Now we perform the actual glob below. This may involve joining * together the pattern arguments, dealing with particular file types * etc. We use a 'goto' to ensure we free any memory allocated along * the way. */ objc -= i; objv += i; result = TCL_OK; if (join) { if (dir != PATH_GENERAL) { Tcl_DStringInit(&prefix); } for (i = 0; i < objc; i++) { string = Tcl_GetStringFromObj(objv[i], &length); Tcl_DStringAppend(&prefix, string, length); if (i != objc -1) { Tcl_DStringAppend(&prefix, separators, 1); } } if (TclGlob(interp, Tcl_DStringValue(&prefix), pathOrDir, globFlags, globTypes) != TCL_OK) { result = TCL_ERROR; goto endOfGlob; } } else { if (dir == PATH_GENERAL) { Tcl_DString str; for (i = 0; i < objc; i++) { Tcl_DStringInit(&str); if (dir == PATH_GENERAL) { Tcl_DStringAppend(&str, Tcl_DStringValue(&prefix), Tcl_DStringLength(&prefix)); } string = Tcl_GetStringFromObj(objv[i], &length); Tcl_DStringAppend(&str, string, length); if (TclGlob(interp, Tcl_DStringValue(&str), pathOrDir, globFlags, globTypes) != TCL_OK) { result = TCL_ERROR; Tcl_DStringFree(&str); goto endOfGlob; } } Tcl_DStringFree(&str); } else { for (i = 0; i < objc; i++) { string = Tcl_GetString(objv[i]); if (TclGlob(interp, string, pathOrDir, globFlags, globTypes) != TCL_OK) { result = TCL_ERROR; goto endOfGlob; } } } } if ((globFlags & TCL_GLOBMODE_NO_COMPLAIN) == 0) { if (Tcl_ListObjLength(interp, Tcl_GetObjResult(interp), &length) != TCL_OK) { /* This should never happen. Maybe we should be more dramatic */ result = TCL_ERROR; goto endOfGlob; } if (length == 0) { Tcl_AppendResult(interp, "no files matched glob pattern", (join || (objc == 1)) ? " \"" : "s \"", (char *) NULL); if (join) { Tcl_AppendResult(interp, Tcl_DStringValue(&prefix), (char *) NULL); } else { char *sep = ""; for (i = 0; i < objc; i++) { string = Tcl_GetString(objv[i]); Tcl_AppendResult(interp, sep, string, (char *) NULL); sep = " "; } } Tcl_AppendResult(interp, "\"", (char *) NULL); result = TCL_ERROR; } } endOfGlob: if (join || (dir == PATH_GENERAL)) { Tcl_DStringFree(&prefix); } if (pathOrDir != NULL) { Tcl_DecrRefCount(pathOrDir); } if (globTypes != NULL) { if (globTypes->macType != NULL) { Tcl_DecrRefCount(globTypes->macType); } if (globTypes->macCreator != NULL) { Tcl_DecrRefCount(globTypes->macCreator); } ckfree((char *) globTypes); } return result; } /* *---------------------------------------------------------------------- * * TclGlob -- * * This procedure prepares arguments for the DoGlob call. * It sets the separator string based on the platform, performs * tilde substitution, and calls DoGlob. * * The interpreter's result, on entry to this function, must * be a valid Tcl list (e.g. it could be empty), since we will * lappend any new results to that list. If it is not a valid * list, this function will fail to do anything very meaningful. * * Note that if globFlags contains 'TCL_GLOBMODE_TAILS' then * pathPrefix cannot be NULL (it is only allowed with -dir or * -path). * * Results: * The return value is a standard Tcl result indicating whether * an error occurred in globbing. After a normal return the * result in interp (set by DoGlob) holds all of the file names * given by the pattern and pathPrefix arguments. After an * error the result in interp will hold an error message, unless * the 'TCL_GLOBMODE_NO_COMPLAIN' flag was given, in which case * an error results in a TCL_OK return leaving the interpreter's * result unmodified. * * Side effects: * The 'pattern' is written to. * *---------------------------------------------------------------------- */ /* ARGSUSED */ int TclGlob(interp, pattern, pathPrefix, globFlags, types) Tcl_Interp *interp; /* Interpreter for returning error message * or appending list of matching file names. */ char *pattern; /* Glob pattern to match. Must not refer * to a static string. */ Tcl_Obj *pathPrefix; /* Path prefix to glob pattern, if non-null, * which is considered literally. */ int globFlags; /* Stores or'ed combination of flags */ Tcl_GlobTypeData *types; /* Struct containing acceptable types. * May be NULL. */ { char *separators; CONST char *head; char *tail, *start; int result; Tcl_Obj *filenamesObj, *savedResultObj; separators = NULL; /* lint. */ switch (tclPlatform) { case TCL_PLATFORM_UNIX: separators = "/"; break; case TCL_PLATFORM_WINDOWS: separators = "/\\:"; break; } if (pathPrefix == NULL) { char c; Tcl_DString buffer; Tcl_DStringInit(&buffer); start = pattern; /* * Perform tilde substitution, if needed. */ if (start[0] == '~') { /* * Find the first path separator after the tilde. */ for (tail = start; *tail != '\0'; tail++) { if (*tail == '\\') { if (strchr(separators, tail[1]) != NULL) { break; } } else if (strchr(separators, *tail) != NULL) { break; } } /* * Determine the home directory for the specified user. */ c = *tail; *tail = '\0'; if (globFlags & TCL_GLOBMODE_NO_COMPLAIN) { /* * We will ignore any error message here, and we * don't want to mess up the interpreter's result. */ head = DoTildeSubst(NULL, start+1, &buffer); } else { head = DoTildeSubst(interp, start+1, &buffer); } *tail = c; if (head == NULL) { if (globFlags & TCL_GLOBMODE_NO_COMPLAIN) { return TCL_OK; } else { return TCL_ERROR; } } if (head != Tcl_DStringValue(&buffer)) { Tcl_DStringAppend(&buffer, head, -1); } pathPrefix = Tcl_NewStringObj(Tcl_DStringValue(&buffer), Tcl_DStringLength(&buffer)); Tcl_IncrRefCount(pathPrefix); globFlags |= TCL_GLOBMODE_DIR; if (c != '\0') { tail++; } Tcl_DStringFree(&buffer); } else { tail = pattern; } } else { Tcl_IncrRefCount(pathPrefix); tail = pattern; } /* * Handling empty path prefixes with glob patterns like 'C:' or * 'c:////////' is a pain on Windows if we leave it too late, since * these aren't really patterns at all! We therefore check the head * of the pattern now for such cases, if we don't have an unquoted * prefix yet. * * Similarly on Unix with '/' at the head of the pattern -- it * just indicates the root volume, so we treat it as such. */ if (tclPlatform == TCL_PLATFORM_WINDOWS) { if (pathPrefix == NULL && tail[0] != '\0' && tail[1] == ':') { char *p = tail + 1; pathPrefix = Tcl_NewStringObj(tail, 1); while (*p != '\0') { char c = p[1]; if (*p == '\\') { if (strchr(separators, c) != NULL) { if (c == '\\') { c = '/'; } Tcl_AppendToObj(pathPrefix, &c, 1); p++; } else { break; } } else if (strchr(separators, *p) != NULL) { Tcl_AppendToObj(pathPrefix, p, 1); } else { break; } p++; } tail = p; Tcl_IncrRefCount(pathPrefix); } else if (pathPrefix == NULL && (tail[0] == '/' || (tail[0] == '\\' && tail[1] == '\\'))) { int driveNameLen; Tcl_Obj *driveName; Tcl_Obj *temp = Tcl_NewStringObj(tail, -1); Tcl_IncrRefCount(temp); switch (TclGetPathType(temp, NULL, &driveNameLen, &driveName)) { case TCL_PATH_VOLUME_RELATIVE: { /* * Volume relative path which is equivalent to a path in * the root of the cwd's volume. We will actually return * non-volume-relative paths here. i.e. 'glob /foo*' will * return 'C:/foobar'. This is much the same as globbing * for a path with '\\' will return one with '/' on Windows. */ Tcl_Obj *cwd = Tcl_FSGetCwd(interp); if (cwd == NULL) { Tcl_DecrRefCount(temp); if (globFlags & TCL_GLOBMODE_NO_COMPLAIN) { return TCL_OK; } else { return TCL_ERROR; } } pathPrefix = Tcl_NewStringObj(Tcl_GetString(cwd), 3); Tcl_DecrRefCount(cwd); if (tail[0] == '/') { tail++; } else { tail+=2; } Tcl_IncrRefCount(pathPrefix); break; } case TCL_PATH_ABSOLUTE: /* * Absolute, possibly network path //Machine/Share. * Use that as the path prefix (it already has a * refCount). */ pathPrefix = driveName; tail += driveNameLen; break; case TCL_PATH_RELATIVE: /* Do nothing */ break; } Tcl_DecrRefCount(temp); } /* * ':' no longer needed as a separator. It is only relevant * to the beginning of the path. */ separators = "/\\"; } else if (tclPlatform == TCL_PLATFORM_UNIX) { if (pathPrefix == NULL && tail[0] == '/') { pathPrefix = Tcl_NewStringObj(tail, 1); tail++; Tcl_IncrRefCount(pathPrefix); } } /* * Finally if we still haven't managed to generate a path * prefix, check if the path starts with a current volume. */ if (pathPrefix == NULL) { int driveNameLen; Tcl_Obj *driveName; if (TclFSNonnativePathType(tail, (int) strlen(tail), NULL, &driveNameLen, &driveName) == TCL_PATH_ABSOLUTE) { pathPrefix = driveName; tail += driveNameLen; } } /* * To process a [glob] invokation, this function may be called * multiple times. Each time, the previously discovered filenames * are in the interpreter result. We stash that away here so the * result is free for error messsages. */ savedResultObj = Tcl_GetObjResult(interp); Tcl_IncrRefCount(savedResultObj); Tcl_ResetResult(interp); TclNewObj(filenamesObj); /* * Now we do the actual globbing, adding filenames as we go to * buffer in filenamesObj */ if (*tail == '\0' && pathPrefix != NULL) { /* * An empty pattern */ result = Tcl_FSMatchInDirectory(interp, filenamesObj, pathPrefix, NULL, types); } else { result = DoGlob(interp, filenamesObj, separators, pathPrefix, globFlags & TCL_GLOBMODE_DIR, tail, types); } /* * Check for errors... */ if (result != TCL_OK) { TclDecrRefCount(filenamesObj); if (globFlags & TCL_GLOBMODE_NO_COMPLAIN) { /* Put back the old result and reset the return code */ Tcl_SetObjResult(interp, savedResultObj); result = TCL_OK; } TclDecrRefCount(savedResultObj); return result; } /* * If we only want the tails, we must strip off the prefix now. * It may seem more efficient to pass the tails flag down into * DoGlob, Tcl_FSMatchInDirectory, but those functions are * continually adjusting the prefix as the various pieces of * the pattern are assimilated, so that would add a lot of * complexity to the code. This way is a little slower (when * the -tails flag is given), but much simpler to code. * * We do it by rewriting the result list in-place. */ if (globFlags & TCL_GLOBMODE_TAILS) { int objc, i; Tcl_Obj **objv; int prefixLen; /* If this length has never been set, set it here */ CONST char *pre = Tcl_GetStringFromObj(pathPrefix, &prefixLen); if (prefixLen > 0 && (strchr(separators, pre[prefixLen-1]) == NULL)) { /* * If we're on Windows and the prefix is a volume * relative one like 'C:', then there won't be * a path separator in between, so no need to * skip it here. */ if ((tclPlatform != TCL_PLATFORM_WINDOWS) || (prefixLen != 2) || (pre[1] != ':')) { prefixLen++; } } Tcl_ListObjGetElements(NULL, filenamesObj, &objc, &objv); for (i = 0; i< objc; i++) { int len; char *oldStr = Tcl_GetStringFromObj(objv[i], &len); Tcl_Obj* elems[1]; if (len == prefixLen) { if ((pattern[0] == '\0') || (strchr(separators, pattern[0]) == NULL)) { elems[0] = Tcl_NewStringObj(".", 1); } else { elems[0] = Tcl_NewStringObj("/", 1); } } else { elems[0] = Tcl_NewStringObj(oldStr + prefixLen, len - prefixLen); } Tcl_ListObjReplace(interp, filenamesObj, i, 1, 1, elems); } } /* * Now we have a list of discovered filenames in filenamesObj and * a list of previously discovered (saved earlier from the * interpreter result) in savedResultObj. Merge them and put them * back in the interpreter result. */ if (Tcl_IsShared(savedResultObj)) { TclDecrRefCount(savedResultObj); savedResultObj = Tcl_DuplicateObj(savedResultObj); Tcl_IncrRefCount(savedResultObj); } if (Tcl_ListObjAppendList(interp, savedResultObj, filenamesObj) != TCL_OK){ result = TCL_ERROR; } else { Tcl_SetObjResult(interp, savedResultObj); } TclDecrRefCount(savedResultObj); TclDecrRefCount(filenamesObj); return result; } /* *---------------------------------------------------------------------- * * SkipToChar -- * * This function traverses a glob pattern looking for the next * unquoted occurance of the specified character at the same braces * nesting level. * * Results: * Updates stringPtr to point to the matching character, or to * the end of the string if nothing matched. The return value * is 1 if a match was found at the top level, otherwise it is 0. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int SkipToChar(stringPtr, match) char **stringPtr; /* Pointer string to check. */ int match; /* Character to find. */ { int quoted, level; register char *p; quoted = 0; level = 0; for (p = *stringPtr; *p != '\0'; p++) { if (quoted) { quoted = 0; continue; } if ((level == 0) && (*p == match)) { *stringPtr = p; return 1; } if (*p == '{') { level++; } else if (*p == '}') { level--; } else if (*p == '\\') { quoted = 1; } } *stringPtr = p; return 0; } /* *---------------------------------------------------------------------- * * DoGlob -- * * This recursive procedure forms the heart of the globbing code. * It performs a depth-first traversal of the tree given by the * path name to be globbed and the pattern. The directory and * remainder are assumed to be native format paths. The prefix * contained in 'pathPtr' is either a directory or path from which * to start the search (or NULL). If pathPtr is NULL, then the * pattern must not start with an absolute path specification * (that case should be handled by moving the absolute path * prefix into pathPtr before calling DoGlob). * * Results: * The return value is a standard Tcl result indicating whether * an error occurred in globbing. After a normal return the * result in interp will be set to hold all of the file names * given by the dir and remaining arguments. After an error the * result in interp will hold an error message. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int DoGlob(interp, matchesObj, separators, pathPtr, flags, pattern, types) Tcl_Interp *interp; /* Interpreter to use for error reporting * (e.g. unmatched brace). */ Tcl_Obj *matchesObj; /* Unshared list object in which to place all * resulting filenames. Caller allocates and * deallocates; DoGlob must not touch the * refCount of this object. */ char *separators; /* String containing separator characters * that should be used to identify globbing * boundaries. */ Tcl_Obj *pathPtr; /* Completely expanded prefix. */ int flags; /* If non-zero then pathPtr is a * directory */ char *pattern; /* The pattern to match against. * Must not be a pointer to a static string. */ Tcl_GlobTypeData *types; /* List object containing list of acceptable * types. May be NULL. */ { int baseLength, quoted, count; int result = TCL_OK; char *name, *p, *openBrace, *closeBrace, *firstSpecialChar; Tcl_Obj *joinedPtr; /* * Consume any leading directory separators, leaving pattern pointing * just past the last initial separator. */ count = 0; name = pattern; for (; *pattern != '\0'; pattern++) { if (*pattern == '\\') { /* * If the first character is escaped, either we have a directory * separator, or we have any other character. In the latter case * the rest is a pattern, and we must break from the loop. * This is particularly important on Windows where '\' is both * the escaping character and a directory separator. */ if (strchr(separators, pattern[1]) != NULL) { pattern++; } else { break; } } else if (strchr(separators, *pattern) == NULL) { break; } count++; } /* * This block of code is not exercised by the Tcl test suite as of * Tcl 8.5a0. Simplifications to the calling paths suggest it may * not be necessary any more, since path separators are handled * elsewhere. It is left in place in case new bugs are reported */ #if 0 /* PROBABLY_OBSOLETE */ /* * Deal with path separators. */ if (pathPtr == NULL) { /* * Length used to be the length of the prefix, and lastChar * the lastChar of the prefix. But, none of this is used * any more. */ int length = 0; char lastChar = 0; switch (tclPlatform) { case TCL_PLATFORM_WINDOWS: /* * If this is a drive relative path, add the colon and the * trailing slash if needed. Otherwise add the slash if * this is the first absolute element, or a later relative * element. Add an extra slash if this is a UNC path. */ if (*name == ':') { Tcl_DStringAppend(&append, ":", 1); if (count > 1) { Tcl_DStringAppend(&append, "/", 1); } } else if ((*pattern != '\0') && (((length > 0) && (strchr(separators, lastChar) == NULL)) || ((length == 0) && (count > 0)))) { Tcl_DStringAppend(&append, "/", 1); if ((length == 0) && (count > 1)) { Tcl_DStringAppend(&append, "/", 1); } } break; case TCL_PLATFORM_UNIX: /* * Add a separator if this is the first absolute element, or * a later relative element. */ if ((*pattern != '\0') && (((length > 0) && (strchr(separators, lastChar) == NULL)) || ((length == 0) && (count > 0)))) { Tcl_DStringAppend(&append, "/", 1); } break; } } #endif /* PROBABLY_OBSOLETE */ /* * Look for the first matching pair of braces or the first * directory separator that is not inside a pair of braces. */ openBrace = closeBrace = NULL; quoted = 0; for (p = pattern; *p != '\0'; p++) { if (quoted) { quoted = 0; } else if (*p == '\\') { quoted = 1; if (strchr(separators, p[1]) != NULL) { /* Quoted directory separator. */ break; } } else if (strchr(separators, *p) != NULL) { /* Unquoted directory separator. */ break; } else if (*p == '{') { openBrace = p; p++; if (SkipToChar(&p, '}')) { /* Balanced braces. */ closeBrace = p; break; } Tcl_SetResult(interp, "unmatched open-brace in file name", TCL_STATIC); return TCL_ERROR; } else if (*p == '}') { Tcl_SetResult(interp, "unmatched close-brace in file name", TCL_STATIC); return TCL_ERROR; } } /* * Substitute the alternate patterns from the braces and recurse. */ if (openBrace != NULL) { char *element; Tcl_DString newName; Tcl_DStringInit(&newName); /* * For each element within in the outermost pair of braces, * append the element and the remainder to the fixed portion * before the first brace and recursively call DoGlob. */ Tcl_DStringAppend(&newName, pattern, openBrace-pattern); baseLength = Tcl_DStringLength(&newName); *closeBrace = '\0'; for (p = openBrace; p != closeBrace; ) { p++; element = p; SkipToChar(&p, ','); Tcl_DStringSetLength(&newName, baseLength); Tcl_DStringAppend(&newName, element, p-element); Tcl_DStringAppend(&newName, closeBrace+1, -1); result = DoGlob(interp, matchesObj, separators, pathPtr, flags, Tcl_DStringValue(&newName), types); if (result != TCL_OK) { break; } } *closeBrace = '}'; Tcl_DStringFree(&newName); return result; } /* * At this point, there are no more brace substitutions to perform on * this path component. The variable p is pointing at a quoted or * unquoted directory separator or the end of the string. So we need * to check for special globbing characters in the current pattern. * We avoid modifying pattern if p is pointing at the end of the string. * * If we find any globbing characters, then we must call * Tcl_FSMatchInDirectory. If we're at the end of the string, then * that's all we need to do. If we're not at the end of the * string, then we must recurse, so we do that below. * * Alternatively, if there are no globbing characters then again * there are two cases. If we're at the end of the string, we just * need to check for the given path's existence and type. If we're * not at the end of the string, we recurse. */ if (*p != '\0') { /* * Note that we are modifying the string in place. This won't work * if the string is a static. */ char savedChar = *p; *p = '\0'; firstSpecialChar = strpbrk(pattern, "*[]?\\"); *p = savedChar; } else { firstSpecialChar = strpbrk(pattern, "*[]?\\"); } if (firstSpecialChar != NULL) { /* * Look for matching files in the given directory. The * implementation of this function is filesystem specific. For * each file that matches, it will add the match onto the * resultPtr given. */ static Tcl_GlobTypeData dirOnly = { TCL_GLOB_TYPE_DIR, 0, NULL, NULL }; char save = *p; Tcl_Obj* subdirsPtr; if (*p == '\0') { return Tcl_FSMatchInDirectory(interp, matchesObj, pathPtr, pattern, types); } /* * We do the recursion ourselves. This makes implementing * Tcl_FSMatchInDirectory for each filesystem much easier. */ *p = '\0'; TclNewObj(subdirsPtr); result = Tcl_FSMatchInDirectory(interp, subdirsPtr, pathPtr, pattern, &dirOnly); *p = save; if (result == TCL_OK) { int subdirc, i; Tcl_Obj **subdirv; result = Tcl_ListObjGetElements(interp, subdirsPtr, &subdirc, &subdirv); for (i=0; result==TCL_OK && i