/* * tclIO.c -- * * This file provides the generic portions (those that are the same on * all platforms and for all channel types) of Tcl's IO facilities. * * Copyright (c) 1998-2000 Ajuba Solutions * Copyright (c) 1995-1997 Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tclIO.c,v 1.137.2.12 2009/10/19 21:59:18 dgp Exp $ */ #include "tclInt.h" #include "tclIO.h" #include /* * All static variables used in this file are collected into a single instance * of the following structure. For multi-threaded implementations, there is * one instance of this structure for each thread. * * Notice that different structures with the same name appear in other files. * The structure defined below is used in this file only. */ typedef struct ThreadSpecificData { NextChannelHandler *nestedHandlerPtr; /* This variable holds the list of nested * ChannelHandlerEventProc invocations. */ ChannelState *firstCSPtr; /* List of all channels currently open, * indexed by ChannelState, as only one * ChannelState exists per set of stacked * channels. */ Tcl_Channel stdinChannel; /* Static variable for the stdin channel. */ int stdinInitialized; Tcl_Channel stdoutChannel; /* Static variable for the stdout channel. */ int stdoutInitialized; Tcl_Channel stderrChannel; /* Static variable for the stderr channel. */ int stderrInitialized; Tcl_Encoding binaryEncoding; } ThreadSpecificData; static Tcl_ThreadDataKey dataKey; /* * Static functions in this file: */ static ChannelBuffer * AllocChannelBuffer(int length); static void ChannelTimerProc(ClientData clientData); static int CheckChannelErrors(ChannelState *statePtr, int direction); static int CheckFlush(Channel *chanPtr, ChannelBuffer *bufPtr, int newlineFlag); static int CheckForDeadChannel(Tcl_Interp *interp, ChannelState *statePtr); static void CheckForStdChannelsBeingClosed(Tcl_Channel chan); static void CleanupChannelHandlers(Tcl_Interp *interp, Channel *chanPtr); static int CloseChannel(Tcl_Interp *interp, Channel *chanPtr, int errorCode); static void CommonGetsCleanup(Channel *chanPtr); static int CopyAndTranslateBuffer(ChannelState *statePtr, char *result, int space); static int CopyBuffer(Channel *chanPtr, char *result, int space); static int CopyData(CopyState *csPtr, int mask); static void CopyEventProc(ClientData clientData, int mask); static void CreateScriptRecord(Tcl_Interp *interp, Channel *chanPtr, int mask, Tcl_Obj *scriptPtr); static void DeleteChannelTable(ClientData clientData, Tcl_Interp *interp); static void DeleteScriptRecord(Tcl_Interp *interp, Channel *chanPtr, int mask); static int DetachChannel(Tcl_Interp *interp, Tcl_Channel chan); static void DiscardInputQueued(ChannelState *statePtr, int discardSavedBuffers); static void DiscardOutputQueued(ChannelState *chanPtr); static int DoRead(Channel *chanPtr, char *srcPtr, int slen); static int DoWrite(Channel *chanPtr, const char *src, int srcLen); static int DoReadChars(Channel *chan, Tcl_Obj *objPtr, int toRead, int appendFlag); static int DoWriteChars(Channel *chan, const char *src, int len); static int FilterInputBytes(Channel *chanPtr, GetsState *statePtr); static int FlushChannel(Tcl_Interp *interp, Channel *chanPtr, int calledFromAsyncFlush); static int TclGetsObjBinary(Tcl_Channel chan, Tcl_Obj *objPtr); static void FreeBinaryEncoding(ClientData clientData); static Tcl_HashTable * GetChannelTable(Tcl_Interp *interp); static int GetInput(Channel *chanPtr); static int HaveVersion(const Tcl_ChannelType *typePtr, Tcl_ChannelTypeVersion minimumVersion); static void PeekAhead(Channel *chanPtr, char **dstEndPtr, GetsState *gsPtr); static int ReadBytes(ChannelState *statePtr, Tcl_Obj *objPtr, int charsLeft, int *offsetPtr); static int ReadChars(ChannelState *statePtr, Tcl_Obj *objPtr, int charsLeft, int *offsetPtr, int *factorPtr); static void RecycleBuffer(ChannelState *statePtr, ChannelBuffer *bufPtr, int mustDiscard); static int StackSetBlockMode(Channel *chanPtr, int mode); static int SetBlockMode(Tcl_Interp *interp, Channel *chanPtr, int mode); static void StopCopy(CopyState *csPtr); static int TranslateInputEOL(ChannelState *statePtr, char *dst, const char *src, int *dstLenPtr, int *srcLenPtr); static int TranslateOutputEOL(ChannelState *statePtr, char *dst, const char *src, int *dstLenPtr, int *srcLenPtr); static void UpdateInterest(Channel *chanPtr); static int WriteBytes(Channel *chanPtr, const char *src, int srcLen); static int WriteChars(Channel *chanPtr, const char *src, int srcLen); static Tcl_Obj * FixLevelCode(Tcl_Obj *msg); static void SpliceChannel(Tcl_Channel chan); static void CutChannel(Tcl_Channel chan); /* * Simplifying helper macros. All may use their argument(s) multiple times. * The ANSI C "prototypes" for the macros are listed below, together with a * short description of what the macro does. * * -------------------------------------------------------------------------- * int BytesLeft(ChannelBuffer *bufPtr) * * Returns the number of bytes of data remaining in the buffer. * * int SpaceLeft(ChannelBuffer *bufPtr) * * Returns the number of bytes of space remaining at the end of the * buffer. * * int IsBufferReady(ChannelBuffer *bufPtr) * * Returns whether a buffer has bytes available within it. * * int IsBufferEmpty(ChannelBuffer *bufPtr) * * Returns whether a buffer is entirely empty. Note that this is not the * inverse of the above operation; trying to merge the two seems to lead * to occasional crashes... * * int IsBufferFull(ChannelBuffer *bufPtr) * * Returns whether more data can be added to a buffer. * * int IsBufferOverflowing(ChannelBuffer *bufPtr) * * Returns whether a buffer has more data in it than it should. * * char *InsertPoint(ChannelBuffer *bufPtr) * * Returns a pointer to where characters should be added to the buffer. * * char *RemovePoint(ChannelBuffer *bufPtr) * * Returns a pointer to where characters should be removed from the * buffer. * -------------------------------------------------------------------------- */ #define BytesLeft(bufPtr) ((bufPtr)->nextAdded - (bufPtr)->nextRemoved) #define SpaceLeft(bufPtr) ((bufPtr)->bufLength - (bufPtr)->nextAdded) #define IsBufferReady(bufPtr) ((bufPtr)->nextAdded > (bufPtr)->nextRemoved) #define IsBufferEmpty(bufPtr) ((bufPtr)->nextAdded == (bufPtr)->nextRemoved) #define IsBufferFull(bufPtr) ((bufPtr)->nextAdded >= (bufPtr)->bufLength) #define IsBufferOverflowing(bufPtr) ((bufPtr)->nextAdded > (bufPtr)->bufLength) #define InsertPoint(bufPtr) ((bufPtr)->buf + (bufPtr)->nextAdded) #define RemovePoint(bufPtr) ((bufPtr)->buf + (bufPtr)->nextRemoved) /* * For working with channel state flag bits. */ #define SetFlag(statePtr, flag) ((statePtr)->flags |= (flag)) #define ResetFlag(statePtr, flag) ((statePtr)->flags &= ~(flag)) /* * Macro for testing whether a string (in optionName, length len) matches a * value (prefix matching rules). Arguments are the minimum length to match * and the value to match against. (Can't use Tcl_GetIndexFromObj as this is * used in a situation where no objects are available.) */ #define HaveOpt(minLength, nameString) \ ((len > (minLength)) && (optionName[1] == (nameString)[1]) \ && (strncmp(optionName, (nameString), len) == 0)) /* * The ChannelObjType type. We actually store the ChannelState structure * as that lives longest and we want to return the bottomChanPtr when * requested (consistent with Tcl_GetChannel). The setFromAny and * updateString can be NULL as they should not be called. */ static void DupChannelIntRep(Tcl_Obj *objPtr, Tcl_Obj *copyPtr); static int SetChannelFromAny(Tcl_Interp *interp, Tcl_Obj *objPtr); static void UpdateStringOfChannel(Tcl_Obj *objPtr); static void FreeChannelIntRep(Tcl_Obj *objPtr); static Tcl_ObjType tclChannelType = { "channel", /* name for this type */ FreeChannelIntRep, /* freeIntRepProc */ DupChannelIntRep, /* dupIntRepProc */ NULL, /* updateStringProc UpdateStringOfChannel */ NULL /* setFromAnyProc SetChannelFromAny */ }; #define GET_CHANNELSTATE(objPtr) \ ((ChannelState *) (objPtr)->internalRep.otherValuePtr) #define SET_CHANNELSTATE(objPtr, storePtr) \ ((objPtr)->internalRep.otherValuePtr = (void *) (storePtr)) #define GET_CHANNELINTERP(objPtr) \ ((Interp *) (objPtr)->internalRep.twoPtrValue.ptr2) #define SET_CHANNELINTERP(objPtr, storePtr) \ ((objPtr)->internalRep.twoPtrValue.ptr2 = (void *) (storePtr)) #define BUSY_STATE(st,fl) \ ((((st)->csPtrR) && ((fl) & TCL_READABLE)) || \ (((st)->csPtrW) && ((fl) & TCL_WRITABLE))) #define MAX_CHANNEL_BUFFER_SIZE (1024*1024) /* *--------------------------------------------------------------------------- * * TclInitIOSubsystem -- * * Initialize all resources used by this subsystem on a per-process * basis. * * Results: * None. * * Side effects: * Depends on the memory subsystems. * *--------------------------------------------------------------------------- */ void TclInitIOSubsystem(void) { /* * By fetching thread local storage we take care of allocating it for each * thread. */ (void) TCL_TSD_INIT(&dataKey); } /* *------------------------------------------------------------------------- * * TclFinalizeIOSubsystem -- * * Releases all resources used by this subsystem on a per-process basis. * Closes all extant channels that have not already been closed because * they were not owned by any interp. * * Results: * None. * * Side effects: * Depends on encoding and memory subsystems. * *------------------------------------------------------------------------- */ /* ARGSUSED */ void TclFinalizeIOSubsystem(void) { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); Channel *chanPtr = NULL; /* Iterates over open channels. */ ChannelState *statePtr; /* State of channel stack */ int active = 1; /* Flag == 1 while there's still work to do */ /* * Walk all channel state structures known to this thread and close * corresponding channels. */ while (active) { /* * Iterate through the open channel list, and find the first channel * that isn't dead. We start from the head of the list each time, * because the close action on one channel can close others. */ active = 0; for (statePtr = tsdPtr->firstCSPtr; statePtr != NULL; statePtr = statePtr->nextCSPtr) { chanPtr = statePtr->topChanPtr; if (!(statePtr->flags & (CHANNEL_INCLOSE|CHANNEL_CLOSED|CHANNEL_DEAD))) { active = 1; break; } } /* * We've found a live channel. Close it. */ if (active) { /* * Set the channel back into blocking mode to ensure that we wait * for all data to flush out. */ (void) Tcl_SetChannelOption(NULL, (Tcl_Channel) chanPtr, "-blocking", "on"); if ((chanPtr == (Channel *) tsdPtr->stdinChannel) || (chanPtr == (Channel *) tsdPtr->stdoutChannel) || (chanPtr == (Channel *) tsdPtr->stderrChannel)) { /* * Decrement the refcount which was earlier artificially * bumped up to keep the channel from being closed. */ statePtr->refCount--; } if (statePtr->refCount <= 0) { /* * Close it only if the refcount indicates that the channel is * not referenced from any interpreter. If it is, that * interpreter will close the channel when it gets destroyed. */ (void) Tcl_Close(NULL, (Tcl_Channel) chanPtr); } else { /* * The refcount is greater than zero, so flush the channel. */ Tcl_Flush((Tcl_Channel) chanPtr); /* * Call the device driver to actually close the underlying * device for this channel. */ if (chanPtr->typePtr->closeProc != TCL_CLOSE2PROC) { (chanPtr->typePtr->closeProc)(chanPtr->instanceData, NULL); } else { (chanPtr->typePtr->close2Proc)(chanPtr->instanceData, NULL, 0); } /* * Finally, we clean up the fields in the channel data * structure since all of them have been deleted already. We * mark the channel with CHANNEL_DEAD to prevent any further * IO operations on it. */ chanPtr->instanceData = NULL; SetFlag(statePtr, CHANNEL_DEAD); } } } TclpFinalizeSockets(); TclpFinalizePipes(); } /* *---------------------------------------------------------------------- * * Tcl_SetStdChannel -- * * This function is used to change the channels that are used for * stdin/stdout/stderr in new interpreters. * * Results: * None * * Side effects: * None. * *---------------------------------------------------------------------- */ void Tcl_SetStdChannel( Tcl_Channel channel, int type) /* One of TCL_STDIN, TCL_STDOUT, TCL_STDERR. */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); switch (type) { case TCL_STDIN: tsdPtr->stdinInitialized = 1; tsdPtr->stdinChannel = channel; break; case TCL_STDOUT: tsdPtr->stdoutInitialized = 1; tsdPtr->stdoutChannel = channel; break; case TCL_STDERR: tsdPtr->stderrInitialized = 1; tsdPtr->stderrChannel = channel; break; } } /* *---------------------------------------------------------------------- * * Tcl_GetStdChannel -- * * Returns the specified standard channel. * * Results: * Returns the specified standard channel, or NULL. * * Side effects: * May cause the creation of a standard channel and the underlying file. * *---------------------------------------------------------------------- */ Tcl_Channel Tcl_GetStdChannel( int type) /* One of TCL_STDIN, TCL_STDOUT, TCL_STDERR. */ { Tcl_Channel channel = NULL; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); /* * If the channels were not created yet, create them now and store them in * the static variables. */ switch (type) { case TCL_STDIN: if (!tsdPtr->stdinInitialized) { tsdPtr->stdinChannel = TclpGetDefaultStdChannel(TCL_STDIN); tsdPtr->stdinInitialized = 1; /* * Artificially bump the refcount to ensure that the channel is * only closed on exit. * * NOTE: Must only do this if stdinChannel is not NULL. It can be * NULL in situations where Tcl is unable to connect to the * standard input. */ if (tsdPtr->stdinChannel != NULL) { Tcl_RegisterChannel(NULL, tsdPtr->stdinChannel); } } channel = tsdPtr->stdinChannel; break; case TCL_STDOUT: if (!tsdPtr->stdoutInitialized) { tsdPtr->stdoutChannel = TclpGetDefaultStdChannel(TCL_STDOUT); tsdPtr->stdoutInitialized = 1; if (tsdPtr->stdoutChannel != NULL) { Tcl_RegisterChannel(NULL, tsdPtr->stdoutChannel); } } channel = tsdPtr->stdoutChannel; break; case TCL_STDERR: if (!tsdPtr->stderrInitialized) { tsdPtr->stderrChannel = TclpGetDefaultStdChannel(TCL_STDERR); tsdPtr->stderrInitialized = 1; if (tsdPtr->stderrChannel != NULL) { Tcl_RegisterChannel(NULL, tsdPtr->stderrChannel); } } channel = tsdPtr->stderrChannel; break; } return channel; } /* *---------------------------------------------------------------------- * * Tcl_CreateCloseHandler * * Creates a close callback which will be called when the channel is * closed. * * Results: * None. * * Side effects: * Causes the callback to be called in the future when the channel will * be closed. * *---------------------------------------------------------------------- */ void Tcl_CreateCloseHandler( Tcl_Channel chan, /* The channel for which to create the close * callback. */ Tcl_CloseProc *proc, /* The callback routine to call when the * channel will be closed. */ ClientData clientData) /* Arbitrary data to pass to the close * callback. */ { ChannelState *statePtr; CloseCallback *cbPtr; statePtr = ((Channel *) chan)->state; cbPtr = (CloseCallback *) ckalloc(sizeof(CloseCallback)); cbPtr->proc = proc; cbPtr->clientData = clientData; cbPtr->nextPtr = statePtr->closeCbPtr; statePtr->closeCbPtr = cbPtr; } /* *---------------------------------------------------------------------- * * Tcl_DeleteCloseHandler -- * * Removes a callback that would have been called on closing the channel. * If there is no matching callback then this function has no effect. * * Results: * None. * * Side effects: * The callback will not be called in the future when the channel is * eventually closed. * *---------------------------------------------------------------------- */ void Tcl_DeleteCloseHandler( Tcl_Channel chan, /* The channel for which to cancel the close * callback. */ Tcl_CloseProc *proc, /* The procedure for the callback to * remove. */ ClientData clientData) /* The callback data for the callback to * remove. */ { ChannelState *statePtr; CloseCallback *cbPtr, *cbPrevPtr; statePtr = ((Channel *) chan)->state; for (cbPtr = statePtr->closeCbPtr, cbPrevPtr = NULL; cbPtr != NULL; cbPtr = cbPtr->nextPtr) { if ((cbPtr->proc == proc) && (cbPtr->clientData == clientData)) { if (cbPrevPtr == NULL) { statePtr->closeCbPtr = cbPtr->nextPtr; } ckfree((char *) cbPtr); break; } else { cbPrevPtr = cbPtr; } } } /* *---------------------------------------------------------------------- * * GetChannelTable -- * * Gets and potentially initializes the channel table for an interpreter. * If it is initializing the table it also inserts channels for stdin, * stdout and stderr if the interpreter is trusted. * * Results: * A pointer to the hash table created, for use by the caller. * * Side effects: * Initializes the channel table for an interpreter. May create channels * for stdin, stdout and stderr. * *---------------------------------------------------------------------- */ static Tcl_HashTable * GetChannelTable( Tcl_Interp *interp) { Tcl_HashTable *hTblPtr; /* Hash table of channels. */ Tcl_Channel stdinChan, stdoutChan, stderrChan; hTblPtr = Tcl_GetAssocData(interp, "tclIO", NULL); if (hTblPtr == NULL) { hTblPtr = (Tcl_HashTable *) ckalloc(sizeof(Tcl_HashTable)); Tcl_InitHashTable(hTblPtr, TCL_STRING_KEYS); Tcl_SetAssocData(interp, "tclIO", (Tcl_InterpDeleteProc *) DeleteChannelTable, hTblPtr); /* * If the interpreter is trusted (not "safe"), insert channels for * stdin, stdout and stderr (possibly creating them in the process). */ if (Tcl_IsSafe(interp) == 0) { stdinChan = Tcl_GetStdChannel(TCL_STDIN); if (stdinChan != NULL) { Tcl_RegisterChannel(interp, stdinChan); } stdoutChan = Tcl_GetStdChannel(TCL_STDOUT); if (stdoutChan != NULL) { Tcl_RegisterChannel(interp, stdoutChan); } stderrChan = Tcl_GetStdChannel(TCL_STDERR); if (stderrChan != NULL) { Tcl_RegisterChannel(interp, stderrChan); } } } return hTblPtr; } /* *---------------------------------------------------------------------- * * DeleteChannelTable -- * * Deletes the channel table for an interpreter, closing any open * channels whose refcount reaches zero. This procedure is invoked when * an interpreter is deleted, via the AssocData cleanup mechanism. * * Results: * None. * * Side effects: * Deletes the hash table of channels. May close channels. May flush * output on closed channels. Removes any channeEvent handlers that were * registered in this interpreter. * *---------------------------------------------------------------------- */ static void DeleteChannelTable( ClientData clientData, /* The per-interpreter data structure. */ Tcl_Interp *interp) /* The interpreter being deleted. */ { Tcl_HashTable *hTblPtr; /* The hash table. */ Tcl_HashSearch hSearch; /* Search variable. */ Tcl_HashEntry *hPtr; /* Search variable. */ Channel *chanPtr; /* Channel being deleted. */ ChannelState *statePtr; /* State of Channel being deleted. */ EventScriptRecord *sPtr, *prevPtr, *nextPtr; /* Variables to loop over all channel events * registered, to delete the ones that refer * to the interpreter being deleted. */ /* * Delete all the registered channels - this will close channels whose * refcount reaches zero. */ hTblPtr = clientData; for (hPtr = Tcl_FirstHashEntry(hTblPtr, &hSearch); hPtr != NULL; hPtr = Tcl_FirstHashEntry(hTblPtr, &hSearch)) { chanPtr = Tcl_GetHashValue(hPtr); statePtr = chanPtr->state; /* * Remove any fileevents registered in this interpreter. */ for (sPtr = statePtr->scriptRecordPtr, prevPtr = NULL; sPtr != NULL; sPtr = nextPtr) { nextPtr = sPtr->nextPtr; if (sPtr->interp == interp) { if (prevPtr == NULL) { statePtr->scriptRecordPtr = nextPtr; } else { prevPtr->nextPtr = nextPtr; } Tcl_DeleteChannelHandler((Tcl_Channel) chanPtr, TclChannelEventScriptInvoker, (ClientData) sPtr); TclDecrRefCount(sPtr->scriptPtr); ckfree((char *) sPtr); } else { prevPtr = sPtr; } } /* * Cannot call Tcl_UnregisterChannel because that procedure calls * Tcl_GetAssocData to get the channel table, which might already be * inaccessible from the interpreter structure. Instead, we emulate * the behavior of Tcl_UnregisterChannel directly here. */ Tcl_DeleteHashEntry(hPtr); SetFlag(statePtr, CHANNEL_TAINTED); statePtr->refCount--; if (statePtr->refCount <= 0) { if (!(statePtr->flags & BG_FLUSH_SCHEDULED)) { (void) Tcl_Close(interp, (Tcl_Channel) chanPtr); } } } Tcl_DeleteHashTable(hTblPtr); ckfree((char *) hTblPtr); } /* *---------------------------------------------------------------------- * * CheckForStdChannelsBeingClosed -- * * Perform special handling for standard channels being closed. When * given a standard channel, if the refcount is now 1, it means that the * last reference to the standard channel is being explicitly closed. Now * bump the refcount artificially down to 0, to ensure the normal * handling of channels being closed will occur. Also reset the static * pointer to the channel to NULL, to avoid dangling references. * * Results: * None. * * Side effects: * Manipulates the refcount on standard channels. May smash the global * static pointer to a standard channel. * *---------------------------------------------------------------------- */ static void CheckForStdChannelsBeingClosed( Tcl_Channel chan) { ChannelState *statePtr = ((Channel *) chan)->state; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if ((chan == tsdPtr->stdinChannel) && (tsdPtr->stdinInitialized)) { if (statePtr->refCount < 2) { statePtr->refCount = 0; tsdPtr->stdinChannel = NULL; return; } } else if ((chan == tsdPtr->stdoutChannel) && (tsdPtr->stdoutInitialized)) { if (statePtr->refCount < 2) { statePtr->refCount = 0; tsdPtr->stdoutChannel = NULL; return; } } else if ((chan == tsdPtr->stderrChannel) && (tsdPtr->stderrInitialized)) { if (statePtr->refCount < 2) { statePtr->refCount = 0; tsdPtr->stderrChannel = NULL; return; } } } /* *---------------------------------------------------------------------- * * Tcl_IsStandardChannel -- * * Test if the given channel is a standard channel. No attempt is made to * check if the channel or the standard channels are initialized or * otherwise valid. * * Results: * Returns 1 if true, 0 if false. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_IsStandardChannel( Tcl_Channel chan) /* Channel to check. */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if ((chan == tsdPtr->stdinChannel) || (chan == tsdPtr->stdoutChannel) || (chan == tsdPtr->stderrChannel)) { return 1; } else { return 0; } } /* *---------------------------------------------------------------------- * * Tcl_RegisterChannel -- * * Adds an already-open channel to the channel table of an interpreter. * If the interpreter passed as argument is NULL, it only increments the * channel refCount. * * Results: * None. * * Side effects: * May increment the reference count of a channel. * *---------------------------------------------------------------------- */ void Tcl_RegisterChannel( Tcl_Interp *interp, /* Interpreter in which to add the channel. */ Tcl_Channel chan) /* The channel to add to this interpreter * channel table. */ { Tcl_HashTable *hTblPtr; /* Hash table of channels. */ Tcl_HashEntry *hPtr; /* Search variable. */ int isNew; /* Is the hash entry new or does it exist? */ Channel *chanPtr; /* The actual channel. */ ChannelState *statePtr; /* State of the actual channel. */ /* * Always (un)register bottom-most channel in the stack. This makes * management of the channel list easier because no manipulation is * necessary during (un)stack operation. */ chanPtr = ((Channel *) chan)->state->bottomChanPtr; statePtr = chanPtr->state; if (statePtr->channelName == NULL) { Tcl_Panic("Tcl_RegisterChannel: channel without name"); } if (interp != NULL) { hTblPtr = GetChannelTable(interp); hPtr = Tcl_CreateHashEntry(hTblPtr, statePtr->channelName, &isNew); if (!isNew) { if (chan == Tcl_GetHashValue(hPtr)) { return; } Tcl_Panic("Tcl_RegisterChannel: duplicate channel names"); } Tcl_SetHashValue(hPtr, chanPtr); } statePtr->refCount++; } /* *---------------------------------------------------------------------- * * Tcl_UnregisterChannel -- * * Deletes the hash entry for a channel associated with an interpreter. * If the interpreter given as argument is NULL, it only decrements the * reference count. (This all happens in the Tcl_DetachChannel helper * function). * * Finally, if the reference count of the channel drops to zero, it is * deleted. * * Results: * A standard Tcl result. * * Side effects: * Calls Tcl_DetachChannel which deletes the hash entry for a channel * associated with an interpreter. * * May delete the channel, which can have a variety of consequences, * especially if we are forced to close the channel. * *---------------------------------------------------------------------- */ int Tcl_UnregisterChannel( Tcl_Interp *interp, /* Interpreter in which channel is defined. */ Tcl_Channel chan) /* Channel to delete. */ { ChannelState *statePtr; /* State of the real channel. */ statePtr = ((Channel *) chan)->state->bottomChanPtr->state; if (statePtr->flags & CHANNEL_INCLOSE) { if (interp != NULL) { Tcl_AppendResult(interp, "Illegal recursive call to close " "through close-handler of channel", NULL); } return TCL_ERROR; } if (DetachChannel(interp, chan) != TCL_OK) { return TCL_OK; } statePtr = ((Channel *) chan)->state->bottomChanPtr->state; /* * Perform special handling for standard channels being closed. If the * refCount is now 1 it means that the last reference to the standard * channel is being explicitly closed, so bump the refCount down * artificially to 0. This will ensure that the channel is actually * closed, below. Also set the static pointer to NULL for the channel. */ CheckForStdChannelsBeingClosed(chan); /* * If the refCount reached zero, close the actual channel. */ if (statePtr->refCount <= 0) { /* * Ensure that if there is another buffer, it gets flushed whether or * not we are doing a background flush. */ if ((statePtr->curOutPtr != NULL) && IsBufferReady(statePtr->curOutPtr)) { SetFlag(statePtr, BUFFER_READY); } Tcl_Preserve((ClientData)statePtr); if (!(statePtr->flags & BG_FLUSH_SCHEDULED)) { /* * We don't want to re-enter Tcl_Close(). */ if (!(statePtr->flags & CHANNEL_CLOSED)) { if (Tcl_Close(interp, chan) != TCL_OK) { SetFlag(statePtr, CHANNEL_CLOSED); Tcl_Release((ClientData)statePtr); return TCL_ERROR; } } } SetFlag(statePtr, CHANNEL_CLOSED); Tcl_Release((ClientData)statePtr); } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_DetachChannel -- * * Deletes the hash entry for a channel associated with an interpreter. * If the interpreter given as argument is NULL, it only decrements the * reference count. Even if the ref count drops to zero, the channel is * NOT closed or cleaned up. This allows a channel to be detached from an * interpreter and left in the same state it was in when it was * originally returned by 'Tcl_OpenFileChannel', for example. * * This function cannot be used on the standard channels, and will return * TCL_ERROR if that is attempted. * * This function should only be necessary for special purposes in which * you need to generate a pristine channel from one that has already been * used. All ordinary purposes will almost always want to use * Tcl_UnregisterChannel instead. * * Provided the channel is not attached to any other interpreter, it can * then be closed with Tcl_Close, rather than with Tcl_UnregisterChannel. * * Results: * A standard Tcl result. If the channel is not currently registered with * the given interpreter, TCL_ERROR is returned, otherwise TCL_OK. * However no error messages are left in the interp's result. * * Side effects: * Deletes the hash entry for a channel associated with an interpreter. * *---------------------------------------------------------------------- */ int Tcl_DetachChannel( Tcl_Interp *interp, /* Interpreter in which channel is defined. */ Tcl_Channel chan) /* Channel to delete. */ { if (Tcl_IsStandardChannel(chan)) { return TCL_ERROR; } return DetachChannel(interp, chan); } /* *---------------------------------------------------------------------- * * DetachChannel -- * * Deletes the hash entry for a channel associated with an interpreter. * If the interpreter given as argument is NULL, it only decrements the * reference count. Even if the ref count drops to zero, the channel is * NOT closed or cleaned up. This allows a channel to be detached from an * interpreter and left in the same state it was in when it was * originally returned by 'Tcl_OpenFileChannel', for example. * * Results: * A standard Tcl result. If the channel is not currently registered with * the given interpreter, TCL_ERROR is returned, otherwise TCL_OK. * However no error messages are left in the interp's result. * * Side effects: * Deletes the hash entry for a channel associated with an interpreter. * *---------------------------------------------------------------------- */ static int DetachChannel( Tcl_Interp *interp, /* Interpreter in which channel is defined. */ Tcl_Channel chan) /* Channel to delete. */ { Tcl_HashTable *hTblPtr; /* Hash table of channels. */ Tcl_HashEntry *hPtr; /* Search variable. */ Channel *chanPtr; /* The real IO channel. */ ChannelState *statePtr; /* State of the real channel. */ /* * Always (un)register bottom-most channel in the stack. This makes * management of the channel list easier because no manipulation is * necessary during (un)stack operation. */ chanPtr = ((Channel *) chan)->state->bottomChanPtr; statePtr = chanPtr->state; if (interp != NULL) { hTblPtr = Tcl_GetAssocData(interp, "tclIO", NULL); if (hTblPtr == NULL) { return TCL_ERROR; } hPtr = Tcl_FindHashEntry(hTblPtr, statePtr->channelName); if (hPtr == NULL) { return TCL_ERROR; } if ((Channel *) Tcl_GetHashValue(hPtr) != chanPtr) { return TCL_ERROR; } Tcl_DeleteHashEntry(hPtr); SetFlag(statePtr, CHANNEL_TAINTED); /* * Remove channel handlers that refer to this interpreter, so that * they will not be present if the actual close is delayed and more * events happen on the channel. This may occur if the channel is * shared between several interpreters, or if the channel has async * flushing active. */ CleanupChannelHandlers(interp, chanPtr); } statePtr->refCount--; return TCL_OK; } /* *--------------------------------------------------------------------------- * * Tcl_GetChannel -- * * Finds an existing Tcl_Channel structure by name in a given * interpreter. This function is public because it is used by * channel-type-specific functions. * * Results: * A Tcl_Channel or NULL on failure. If failed, interp's result object * contains an error message. *modePtr is filled with the modes in which * the channel was opened. * * Side effects: * None. * *--------------------------------------------------------------------------- */ Tcl_Channel Tcl_GetChannel( Tcl_Interp *interp, /* Interpreter in which to find or create the * channel. */ const char *chanName, /* The name of the channel. */ int *modePtr) /* Where to store the mode in which the * channel was opened? Will contain an ORed * combination of TCL_READABLE and * TCL_WRITABLE, if non-NULL. */ { Channel *chanPtr; /* The actual channel. */ Tcl_HashTable *hTblPtr; /* Hash table of channels. */ Tcl_HashEntry *hPtr; /* Search variable. */ const char *name; /* Translated name. */ /* * Substitute "stdin", etc. Note that even though we immediately find the * channel using Tcl_GetStdChannel, we still need to look it up in the * specified interpreter to ensure that it is present in the channel * table. Otherwise, safe interpreters would always have access to the * standard channels. */ name = chanName; if ((chanName[0] == 's') && (chanName[1] == 't')) { chanPtr = NULL; if (strcmp(chanName, "stdin") == 0) { chanPtr = (Channel *) Tcl_GetStdChannel(TCL_STDIN); } else if (strcmp(chanName, "stdout") == 0) { chanPtr = (Channel *) Tcl_GetStdChannel(TCL_STDOUT); } else if (strcmp(chanName, "stderr") == 0) { chanPtr = (Channel *) Tcl_GetStdChannel(TCL_STDERR); } if (chanPtr != NULL) { name = chanPtr->state->channelName; } } hTblPtr = GetChannelTable(interp); hPtr = Tcl_FindHashEntry(hTblPtr, name); if (hPtr == NULL) { Tcl_AppendResult(interp, "can not find channel named \"", chanName, "\"", NULL); Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "CHANNEL", chanName, NULL); return NULL; } /* * Always return bottom-most channel in the stack. This one lives the * longest - other channels may go away unnoticed. The other APIs * compensate where necessary to retrieve the topmost channel again. */ chanPtr = Tcl_GetHashValue(hPtr); chanPtr = chanPtr->state->bottomChanPtr; if (modePtr != NULL) { *modePtr = (chanPtr->state->flags & (TCL_READABLE|TCL_WRITABLE)); } return (Tcl_Channel) chanPtr; } /* *--------------------------------------------------------------------------- * * TclGetChannelFromObj -- * * Finds an existing Tcl_Channel structure by name in a given * interpreter. This function is public because it is used by * channel-type-specific functions. * * Results: * A Tcl_Channel or NULL on failure. If failed, interp's result object * contains an error message. *modePtr is filled with the modes in which * the channel was opened. * * Side effects: * None. * *--------------------------------------------------------------------------- */ int TclGetChannelFromObj( Tcl_Interp *interp, /* Interpreter in which to find or create the * channel. */ Tcl_Obj *objPtr, Tcl_Channel *channelPtr, int *modePtr, /* Where to store the mode in which the * channel was opened? Will contain an ORed * combination of TCL_READABLE and * TCL_WRITABLE, if non-NULL. */ int flags) { ChannelState *statePtr; if (SetChannelFromAny(interp, objPtr) != TCL_OK) { return TCL_ERROR; } statePtr = GET_CHANNELSTATE(objPtr); *channelPtr = (Tcl_Channel) (statePtr->bottomChanPtr); if (modePtr != NULL) { *modePtr = (statePtr->flags & (TCL_READABLE|TCL_WRITABLE)); } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_CreateChannel -- * * Creates a new entry in the hash table for a Tcl_Channel record. * * Results: * Returns the new Tcl_Channel. * * Side effects: * Creates a new Tcl_Channel instance and inserts it into the hash table. * *---------------------------------------------------------------------- */ Tcl_Channel Tcl_CreateChannel( Tcl_ChannelType *typePtr, /* The channel type record. */ const char *chanName, /* Name of channel to record. */ ClientData instanceData, /* Instance specific data. */ int mask) /* TCL_READABLE & TCL_WRITABLE to indicate if * the channel is readable, writable. */ { Channel *chanPtr; /* The channel structure newly created. */ ChannelState *statePtr; /* The stack-level independent state info for * the channel. */ const char *name; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); /* * With the change of the Tcl_ChannelType structure to use a version in * 8.3.2+, we have to make sure that our assumption that the structure * remains a binary compatible size is true. * * If this assertion fails on some system, then it can be removed only if * the user recompiles code with older channel drivers in the new system * as well. */ assert(sizeof(Tcl_ChannelTypeVersion) == sizeof(Tcl_DriverBlockModeProc*)); /* * JH: We could subsequently memset these to 0 to avoid the numerous * assignments to 0/NULL below. */ chanPtr = (Channel *) ckalloc(sizeof(Channel)); statePtr = (ChannelState *) ckalloc(sizeof(ChannelState)); chanPtr->state = statePtr; chanPtr->instanceData = instanceData; chanPtr->typePtr = typePtr; /* * Set all the bits that are part of the stack-independent state * information for the channel. */ if (chanName != NULL) { char *tmp = ckalloc((unsigned) (strlen(chanName) + 1)); statePtr->channelName = tmp; strcpy(tmp, chanName); } else { Tcl_Panic("Tcl_CreateChannel: NULL channel name"); } statePtr->flags = mask; /* * Set the channel to system default encoding. * * Note the strange bit of protection taking place here. If the system * encoding name is reported back as "binary", something weird is * happening. Tcl provides no "binary" encoding, so someone else has * provided one. We ignore it so as not to interfere with the "magic" * interpretation that Tcl_Channels give to the "-encoding binary" option. */ statePtr->encoding = NULL; name = Tcl_GetEncodingName(NULL); if (strcmp(name, "binary") != 0) { statePtr->encoding = Tcl_GetEncoding(NULL, name); } statePtr->inputEncodingState = NULL; statePtr->inputEncodingFlags = TCL_ENCODING_START; statePtr->outputEncodingState = NULL; statePtr->outputEncodingFlags = TCL_ENCODING_START; /* * Set the channel up initially in AUTO input translation mode to accept * "\n", "\r" and "\r\n". Output translation mode is set to a platform * specific default value. The eofChar is set to 0 for both input and * output, so that Tcl does not look for an in-file EOF indicator (e.g. * ^Z) and does not append an EOF indicator to files. */ statePtr->inputTranslation = TCL_TRANSLATE_AUTO; statePtr->outputTranslation = TCL_PLATFORM_TRANSLATION; statePtr->inEofChar = 0; statePtr->outEofChar = 0; statePtr->unreportedError = 0; statePtr->refCount = 0; statePtr->closeCbPtr = NULL; statePtr->curOutPtr = NULL; statePtr->outQueueHead = NULL; statePtr->outQueueTail = NULL; statePtr->saveInBufPtr = NULL; statePtr->inQueueHead = NULL; statePtr->inQueueTail = NULL; statePtr->chPtr = NULL; statePtr->interestMask = 0; statePtr->scriptRecordPtr = NULL; statePtr->bufSize = CHANNELBUFFER_DEFAULT_SIZE; statePtr->timer = NULL; statePtr->csPtrR = NULL; statePtr->csPtrW = NULL; statePtr->outputStage = NULL; if ((statePtr->encoding != NULL) && (statePtr->flags & TCL_WRITABLE)) { statePtr->outputStage = (char *) ckalloc((unsigned) (statePtr->bufSize + 2)); } /* * As we are creating the channel, it is obviously the top for now. */ statePtr->topChanPtr = chanPtr; statePtr->bottomChanPtr = chanPtr; chanPtr->downChanPtr = NULL; chanPtr->upChanPtr = NULL; chanPtr->inQueueHead = NULL; chanPtr->inQueueTail = NULL; /* * TIP #219, Tcl Channel Reflection API */ statePtr->chanMsg = NULL; statePtr->unreportedMsg = NULL; /* * Link the channel into the list of all channels; create an on-exit * handler if there is not one already, to close off all the channels in * the list on exit. * * JH: Could call Tcl_SpliceChannel, but need to avoid NULL check. * * TIP #218. * AK: Just initialize the field to NULL before invoking Tcl_SpliceChannel * We need Tcl_SpliceChannel, for the threadAction calls. There is no * real reason to duplicate all of this. * NOTE: All drivers using thread actions now have to perform their TSD * manipulation only in their thread action proc. Doing it when * creating their instance structures will collide with the thread * action activity and lead to damaged lists. */ statePtr->nextCSPtr = NULL; SpliceChannel((Tcl_Channel) chanPtr); /* * Install this channel in the first empty standard channel slot, if the * channel was previously closed explicitly. */ if ((tsdPtr->stdinChannel == NULL) && (tsdPtr->stdinInitialized == 1)) { Tcl_SetStdChannel((Tcl_Channel) chanPtr, TCL_STDIN); Tcl_RegisterChannel(NULL, (Tcl_Channel) chanPtr); } else if ((tsdPtr->stdoutChannel == NULL) && (tsdPtr->stdoutInitialized == 1)) { Tcl_SetStdChannel((Tcl_Channel) chanPtr, TCL_STDOUT); Tcl_RegisterChannel(NULL, (Tcl_Channel) chanPtr); } else if ((tsdPtr->stderrChannel == NULL) && (tsdPtr->stderrInitialized == 1)) { Tcl_SetStdChannel((Tcl_Channel) chanPtr, TCL_STDERR); Tcl_RegisterChannel(NULL, (Tcl_Channel) chanPtr); } return (Tcl_Channel) chanPtr; } /* *---------------------------------------------------------------------- * * Tcl_StackChannel -- * * Replaces an entry in the hash table for a Tcl_Channel record. The * replacement is a new channel with same name, it supercedes the * replaced channel. Input and output of the superceded channel is now * going through the newly created channel and allows the arbitrary * filtering/manipulation of the dataflow. * * Andreas Kupries , 12/13/1998 "Trf-Patch for * filtering channels" * * Results: * Returns the new Tcl_Channel, which actually contains the saved * information about prevChan. * * Side effects: * A new channel structure is allocated and linked below the existing * channel. The channel operations and client data of the existing * channel are copied down to the newly created channel, and the current * channel has its operations replaced by the new typePtr. * *---------------------------------------------------------------------- */ Tcl_Channel Tcl_StackChannel( Tcl_Interp *interp, /* The interpreter we are working in */ Tcl_ChannelType *typePtr, /* The channel type record for the new * channel. */ ClientData instanceData, /* Instance specific data for the new * channel. */ int mask, /* TCL_READABLE & TCL_WRITABLE to indicate if * the channel is readable, writable. */ Tcl_Channel prevChan) /* The channel structure to replace */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); Channel *chanPtr, *prevChanPtr; ChannelState *statePtr; Tcl_DriverThreadActionProc *threadActionProc; /* * Find the given channel (prevChan) in the list of all channels. If we do * not find it, then it was never registered correctly. * * This operation should occur at the top of a channel stack. */ statePtr = (ChannelState *) tsdPtr->firstCSPtr; prevChanPtr = ((Channel *) prevChan)->state->topChanPtr; while ((statePtr != NULL) && (statePtr->topChanPtr != prevChanPtr)) { statePtr = statePtr->nextCSPtr; } if (statePtr == NULL) { if (interp) { Tcl_AppendResult(interp, "couldn't find state for channel \"", Tcl_GetChannelName(prevChan), "\"", NULL); } return NULL; } /* * Here we check if the given "mask" matches the "flags" of the already * existing channel. * * | - | R | W | RW | * --+---+---+---+----+ <=> 0 != (chan->mask & prevChan->mask) * - | | | | | * R | | + | | + | The superceding channel is allowed to restrict * W | | | + | + | the capabilities of the superceded one! * RW| | + | + | + | * --+---+---+---+----+ */ if ((mask & (statePtr->flags & (TCL_READABLE | TCL_WRITABLE))) == 0) { if (interp) { Tcl_AppendResult(interp, "reading and writing both disallowed for channel \"", Tcl_GetChannelName(prevChan), "\"", NULL); } return NULL; } /* * Flush the buffers. This ensures that any data still in them at this * time is not handled by the new transformation. Restrict this to * writable channels. Take care to hide a possible bg-copy in progress * from Tcl_Flush and the CheckForChannelErrors inside. */ if ((mask & TCL_WRITABLE) != 0) { CopyState *csPtrR; CopyState *csPtrW; csPtrR = statePtr->csPtrR; statePtr->csPtrR = NULL; csPtrW = statePtr->csPtrW; statePtr->csPtrW = NULL; if (Tcl_Flush((Tcl_Channel) prevChanPtr) != TCL_OK) { statePtr->csPtrR = csPtrR; statePtr->csPtrW = csPtrW; if (interp) { Tcl_AppendResult(interp, "could not flush channel \"", Tcl_GetChannelName(prevChan), "\"", NULL); } return NULL; } statePtr->csPtrR = csPtrR; statePtr->csPtrW = csPtrW; } /* * Discard any input in the buffers. They are not yet read by the user of * the channel, so they have to go through the new transformation before * reading. As the buffers contain the untransformed form their contents * are not only useless but actually distorts our view of the system. * * To preserve the information without having to read them again and to * avoid problems with the location in the channel (seeking might be * impossible) we move the buffers from the common state structure into * the channel itself. We use the buffers in the channel below the new * transformation to hold the data. In the future this allows us to write * transformations which pre-read data and push the unused part back when * they are going away. */ if (((mask & TCL_READABLE) != 0) && (statePtr->inQueueHead != NULL)) { /* * Remark: It is possible that the channel buffers contain data from * some earlier push-backs. */ statePtr->inQueueTail->nextPtr = prevChanPtr->inQueueHead; prevChanPtr->inQueueHead = statePtr->inQueueHead; if (prevChanPtr->inQueueTail == NULL) { prevChanPtr->inQueueTail = statePtr->inQueueTail; } statePtr->inQueueHead = NULL; statePtr->inQueueTail = NULL; } chanPtr = (Channel *) ckalloc(sizeof(Channel)); /* * Save some of the current state into the new structure, reinitialize the * parts which will stay with the transformation. * * Remarks: */ chanPtr->state = statePtr; chanPtr->instanceData = instanceData; chanPtr->typePtr = typePtr; chanPtr->downChanPtr = prevChanPtr; chanPtr->upChanPtr = NULL; chanPtr->inQueueHead = NULL; chanPtr->inQueueTail = NULL; /* * Place new block at the head of a possibly existing list of previously * stacked channels. */ prevChanPtr->upChanPtr = chanPtr; statePtr->topChanPtr = chanPtr; /* * TIP #218, Channel Thread Actions. * * We call the thread actions for the new channel directly. We _cannot_ * use SpliceChannel, because the (thread-)global list of all channels * always contains the _ChannelState_ for a stack of channels, not the * individual channels. And SpliceChannel would not only call the thread * actions, but also add the shared ChannelState to this list a second * time, mangling it. */ threadActionProc = Tcl_ChannelThreadActionProc(chanPtr->typePtr); if (threadActionProc != NULL) { (*threadActionProc)(chanPtr->instanceData, TCL_CHANNEL_THREAD_INSERT); } return (Tcl_Channel) chanPtr; } /* *---------------------------------------------------------------------- * * Tcl_UnstackChannel -- * * Unstacks an entry in the hash table for a Tcl_Channel record. This is * the reverse to 'Tcl_StackChannel'. * * Results: * A standard Tcl result. * * Side effects: * If TCL_ERROR is returned, the posix error code will be set with * Tcl_SetErrno. May leave a message in interp result as well. * *---------------------------------------------------------------------- */ int Tcl_UnstackChannel( Tcl_Interp *interp, /* The interpreter we are working in */ Tcl_Channel chan) /* The channel to unstack */ { Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; int result = 0; Tcl_DriverThreadActionProc *threadActionProc; /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; if (chanPtr->downChanPtr != NULL) { /* * Instead of manipulating the per-thread / per-interp list/hashtable * of registered channels we wind down the state of the transformation, * and then restore the state of underlying channel into the old * structure. */ Channel *downChanPtr = chanPtr->downChanPtr; /* * Flush the buffers. This ensures that any data still in them at this * time _is_ handled by the transformation we are unstacking right * now. Restrict this to writable channels. Take care to hide a * possible bg-copy in progress from Tcl_Flush and the * CheckForChannelErrors inside. */ if (statePtr->flags & TCL_WRITABLE) { CopyState *csPtrR; CopyState *csPtrW; csPtrR = statePtr->csPtrR; statePtr->csPtrR = NULL; csPtrW = statePtr->csPtrW; statePtr->csPtrW = NULL; if (Tcl_Flush((Tcl_Channel) chanPtr) != TCL_OK) { statePtr->csPtrR = csPtrR; statePtr->csPtrW = csPtrW; /* * TIP #219, Tcl Channel Reflection API. * Move error messages put by the driver into the chan/ip * bypass area into the regular interpreter result. Fall back * to the regular message if nothing was found in the * bypasses. */ if (!TclChanCaughtErrorBypass(interp, chan) && interp) { Tcl_AppendResult(interp, "could not flush channel \"", Tcl_GetChannelName((Tcl_Channel) chanPtr), "\"", NULL); } return TCL_ERROR; } statePtr->csPtrR = csPtrR; statePtr->csPtrW = csPtrW; } /* * Anything in the input queue and the push-back buffers of the * transformation going away is transformed data, but not yet read. As * unstacking means that the caller does not want to see transformed * data any more we have to discard these bytes. To avoid writing an * analogue to 'DiscardInputQueued' we move the information in the * push back buffers to the input queue and then call * 'DiscardInputQueued' on that. */ if ((((statePtr->flags & TCL_READABLE) != 0)) && ((statePtr->inQueueHead != NULL) || (chanPtr->inQueueHead != NULL))) { if ((statePtr->inQueueHead != NULL) && (chanPtr->inQueueHead != NULL)) { statePtr->inQueueTail->nextPtr = chanPtr->inQueueHead; statePtr->inQueueTail = chanPtr->inQueueTail; statePtr->inQueueHead = statePtr->inQueueTail; } else if (chanPtr->inQueueHead != NULL) { statePtr->inQueueHead = chanPtr->inQueueHead; statePtr->inQueueTail = chanPtr->inQueueTail; } chanPtr->inQueueHead = NULL; chanPtr->inQueueTail = NULL; DiscardInputQueued(statePtr, 0); } /* * TIP #218, Channel Thread Actions. * * We call the thread actions for the new channel directly. We * _cannot_ use CutChannel, because the (thread-)global list of all * channels always contains the _ChannelState_ for a stack of * channels, not the individual channels. And SpliceChannel would not * only call the thread actions, but also remove the shared * ChannelState from this list despite there being more channels for * the state which are still active. */ threadActionProc = Tcl_ChannelThreadActionProc(chanPtr->typePtr); if (threadActionProc != NULL) { (*threadActionProc)(chanPtr->instanceData, TCL_CHANNEL_THREAD_REMOVE); } statePtr->topChanPtr = downChanPtr; downChanPtr->upChanPtr = NULL; /* * Leave this link intact for closeproc * chanPtr->downChanPtr = NULL; */ /* * Close and free the channel driver state. */ if (chanPtr->typePtr->closeProc != TCL_CLOSE2PROC) { result = (chanPtr->typePtr->closeProc)(chanPtr->instanceData, interp); } else { result = (chanPtr->typePtr->close2Proc)(chanPtr->instanceData, interp, 0); } chanPtr->typePtr = NULL; /* * AK: Tcl_NotifyChannel may hold a reference to this block of memory */ Tcl_EventuallyFree(chanPtr, TCL_DYNAMIC); UpdateInterest(downChanPtr); if (result != 0) { Tcl_SetErrno(result); /* * TIP #219, Tcl Channel Reflection API. * Move error messages put by the driver into the chan/ip bypass * area into the regular interpreter result. */ TclChanCaughtErrorBypass(interp, chan); return TCL_ERROR; } } else { /* * This channel does not cover another one. Simply do a close, if * necessary. */ if (statePtr->refCount <= 0) { if (Tcl_Close(interp, chan) != TCL_OK) { /* * TIP #219, Tcl Channel Reflection API. * "TclChanCaughtErrorBypass" is not required here, it was * done already by "Tcl_Close". */ return TCL_ERROR; } } /* * TIP #218, Channel Thread Actions. * Not required in this branch, this is done by Tcl_Close. If * Tcl_Close is not called then the ChannelState is still active in * the thread and no action has to be taken either. */ } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_GetStackedChannel -- * * Determines whether the specified channel is stacked upon another. * * Results: * NULL if the channel is not stacked upon another one, or a reference to * the channel it is stacked upon. This reference can be used in queries, * but modification is not allowed. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Channel Tcl_GetStackedChannel( Tcl_Channel chan) { Channel *chanPtr = (Channel *) chan; /* The actual channel. */ return (Tcl_Channel) chanPtr->downChanPtr; } /* *---------------------------------------------------------------------- * * Tcl_GetTopChannel -- * * Returns the top channel of a channel stack. * * Results: * NULL if the channel is not stacked upon another one, or a reference to * the channel it is stacked upon. This reference can be used in queries, * but modification is not allowed. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Channel Tcl_GetTopChannel( Tcl_Channel chan) { Channel *chanPtr = (Channel *) chan; /* The actual channel. */ return (Tcl_Channel) chanPtr->state->topChanPtr; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelInstanceData -- * * Returns the client data associated with a channel. * * Results: * The client data. * * Side effects: * None. * *---------------------------------------------------------------------- */ ClientData Tcl_GetChannelInstanceData( Tcl_Channel chan) /* Channel for which to return client data. */ { Channel *chanPtr = (Channel *) chan; /* The actual channel. */ return chanPtr->instanceData; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelThread -- * * Given a channel structure, returns the thread managing it. TIP #10 * * Results: * Returns the id of the thread managing the channel. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_ThreadId Tcl_GetChannelThread( Tcl_Channel chan) /* The channel to return the managing thread * for. */ { Channel *chanPtr = (Channel *) chan; /* The actual channel. */ return chanPtr->state->managingThread; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelType -- * * Given a channel structure, returns the channel type structure. * * Results: * Returns a pointer to the channel type structure. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_ChannelType * Tcl_GetChannelType( Tcl_Channel chan) /* The channel to return type for. */ { Channel *chanPtr = (Channel *) chan; /* The actual channel. */ return chanPtr->typePtr; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelMode -- * * Computes a mask indicating whether the channel is open for reading and * writing. * * Results: * An OR-ed combination of TCL_READABLE and TCL_WRITABLE. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_GetChannelMode( Tcl_Channel chan) /* The channel for which the mode is being * computed. */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of actual channel. */ return (statePtr->flags & (TCL_READABLE | TCL_WRITABLE)); } /* *---------------------------------------------------------------------- * * Tcl_GetChannelName -- * * Returns the string identifying the channel name. * * Results: * The string containing the channel name. This memory is owned by the * generic layer and should not be modified by the caller. * * Side effects: * None. * *---------------------------------------------------------------------- */ const char * Tcl_GetChannelName( Tcl_Channel chan) /* The channel for which to return the name. */ { ChannelState *statePtr; /* State of actual channel. */ statePtr = ((Channel *) chan)->state; return statePtr->channelName; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelHandle -- * * Returns an OS handle associated with a channel. * * Results: * Returns TCL_OK and places the handle in handlePtr, or returns * TCL_ERROR on failure. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_GetChannelHandle( Tcl_Channel chan, /* The channel to get file from. */ int direction, /* TCL_WRITABLE or TCL_READABLE. */ ClientData *handlePtr) /* Where to store handle */ { Channel *chanPtr; /* The actual channel. */ ClientData handle; int result; chanPtr = ((Channel *) chan)->state->bottomChanPtr; if (!chanPtr->typePtr->getHandleProc) { Tcl_Obj* err; TclNewLiteralStringObj(err, "channel \""); Tcl_AppendToObj(err, Tcl_GetChannelName(chan), -1); Tcl_AppendToObj(err, "\" does not support OS handles", -1); Tcl_SetChannelError (chan,err); return TCL_ERROR; } result = (chanPtr->typePtr->getHandleProc)(chanPtr->instanceData, direction, &handle); if (handlePtr) { *handlePtr = handle; } return result; } /* *--------------------------------------------------------------------------- * * AllocChannelBuffer -- * * A channel buffer has BUFFER_PADDING bytes extra at beginning to hold * any bytes of a native-encoding character that got split by the end of * the previous buffer and need to be moved to the beginning of the next * buffer to make a contiguous string so it can be converted to UTF-8. * * A channel buffer has BUFFER_PADDING bytes extra at the end to hold any * bytes of a native-encoding character (generated from a UTF-8 * character) that overflow past the end of the buffer and need to be * moved to the next buffer. * * Results: * A newly allocated channel buffer. * * Side effects: * None. * *--------------------------------------------------------------------------- */ static ChannelBuffer * AllocChannelBuffer( int length) /* Desired length of channel buffer. */ { ChannelBuffer *bufPtr; int n; n = length + CHANNELBUFFER_HEADER_SIZE + BUFFER_PADDING + BUFFER_PADDING; bufPtr = (ChannelBuffer *) ckalloc((unsigned) n); bufPtr->nextAdded = BUFFER_PADDING; bufPtr->nextRemoved = BUFFER_PADDING; bufPtr->bufLength = length + BUFFER_PADDING; bufPtr->nextPtr = NULL; return bufPtr; } /* *---------------------------------------------------------------------- * * RecycleBuffer -- * * Helper function to recycle input and output buffers. Ensures that two * input buffers are saved (one in the input queue and another in the * saveInBufPtr field) and that curOutPtr is set to a buffer. Only if * these conditions are met is the buffer freed to the OS. * * Results: * None. * * Side effects: * May free a buffer to the OS. * *---------------------------------------------------------------------- */ static void RecycleBuffer( ChannelState *statePtr, /* ChannelState in which to recycle buffers. */ ChannelBuffer *bufPtr, /* The buffer to recycle. */ int mustDiscard) /* If nonzero, free the buffer to the OS, * always. */ { /* * Do we have to free the buffer to the OS? */ if (mustDiscard) { ckfree((char *) bufPtr); return; } /* * Only save buffers which are at least as big as the requested buffersize * for the channel. This is to honor dynamic changes of the buffersize * made by the user. */ if ((bufPtr->bufLength - BUFFER_PADDING) < statePtr->bufSize) { ckfree((char *) bufPtr); return; } /* * Only save buffers for the input queue if the channel is readable. */ if (statePtr->flags & TCL_READABLE) { if (statePtr->inQueueHead == NULL) { statePtr->inQueueHead = bufPtr; statePtr->inQueueTail = bufPtr; goto keepBuffer; } if (statePtr->saveInBufPtr == NULL) { statePtr->saveInBufPtr = bufPtr; goto keepBuffer; } } /* * Only save buffers for the output queue if the channel is writable. */ if (statePtr->flags & TCL_WRITABLE) { if (statePtr->curOutPtr == NULL) { statePtr->curOutPtr = bufPtr; goto keepBuffer; } } /* * If we reached this code we return the buffer to the OS. */ ckfree((char *) bufPtr); return; keepBuffer: bufPtr->nextRemoved = BUFFER_PADDING; bufPtr->nextAdded = BUFFER_PADDING; bufPtr->nextPtr = NULL; } /* *---------------------------------------------------------------------- * * DiscardOutputQueued -- * * Discards all output queued in the output queue of a channel. * * Results: * None. * * Side effects: * Recycles buffers. * *---------------------------------------------------------------------- */ static void DiscardOutputQueued( ChannelState *statePtr) /* ChannelState for which to discard output. */ { ChannelBuffer *bufPtr; while (statePtr->outQueueHead != NULL) { bufPtr = statePtr->outQueueHead; statePtr->outQueueHead = bufPtr->nextPtr; RecycleBuffer(statePtr, bufPtr, 0); } statePtr->outQueueHead = NULL; statePtr->outQueueTail = NULL; } /* *---------------------------------------------------------------------- * * CheckForDeadChannel -- * * This function checks is a given channel is Dead (a channel that has * been closed but not yet deallocated.) * * Results: * True (1) if channel is Dead, False (0) if channel is Ok * * Side effects: * None * *---------------------------------------------------------------------- */ static int CheckForDeadChannel( Tcl_Interp *interp, /* For error reporting (can be NULL) */ ChannelState *statePtr) /* The channel state to check. */ { if (statePtr->flags & CHANNEL_DEAD) { Tcl_SetErrno(EINVAL); if (interp) { Tcl_AppendResult(interp, "unable to access channel: invalid channel", NULL); } return 1; } return 0; } /* *---------------------------------------------------------------------- * * FlushChannel -- * * This function flushes as much of the queued output as is possible * now. If calledFromAsyncFlush is nonzero, it is being called in an * event handler to flush channel output asynchronously. * * Results: * 0 if successful, else the error code that was returned by the channel * type operation. May leave a message in the interp result. * * Side effects: * May produce output on a channel. May block indefinitely if the channel * is synchronous. May schedule an async flush on the channel. May * recycle memory for buffers in the output queue. * *---------------------------------------------------------------------- */ static int FlushChannel( Tcl_Interp *interp, /* For error reporting during close. */ Channel *chanPtr, /* The channel to flush on. */ int calledFromAsyncFlush) /* If nonzero then we are being called from an * asynchronous flush callback. */ { ChannelState *statePtr = chanPtr->state; /* State of the channel stack. */ ChannelBuffer *bufPtr; /* Iterates over buffered output queue. */ int toWrite; /* Amount of output data in current buffer * available to be written. */ int written; /* Amount of output data actually written in * current round. */ int errorCode = 0; /* Stores POSIX error codes from channel * driver operations. */ int wroteSome = 0; /* Set to one if any data was written to the * driver. */ /* * Prevent writing on a dead channel -- a channel that has been closed but * not yet deallocated. This can occur if the exit handler for the channel * deallocation runs before all channels are deregistered in all * interpreters. */ if (CheckForDeadChannel(interp, statePtr)) { return -1; } /* * Loop over the queued buffers and attempt to flush as much as possible * of the queued output to the channel. */ while (1) { /* * If the queue is empty and there is a ready current buffer, OR if * the current buffer is full, then move the current buffer to the * queue. */ if (((statePtr->curOutPtr != NULL) && IsBufferFull(statePtr->curOutPtr)) || ((statePtr->flags & BUFFER_READY) && (statePtr->outQueueHead == NULL))) { ResetFlag(statePtr, BUFFER_READY); statePtr->curOutPtr->nextPtr = NULL; if (statePtr->outQueueHead == NULL) { statePtr->outQueueHead = statePtr->curOutPtr; } else { statePtr->outQueueTail->nextPtr = statePtr->curOutPtr; } statePtr->outQueueTail = statePtr->curOutPtr; statePtr->curOutPtr = NULL; } bufPtr = statePtr->outQueueHead; /* * If we are not being called from an async flush and an async flush * is active, we just return without producing any output. */ if ((!calledFromAsyncFlush) && (statePtr->flags & BG_FLUSH_SCHEDULED)) { return 0; } /* * If the output queue is still empty, break out of the while loop. */ if (bufPtr == NULL) { break; /* Out of the "while (1)". */ } /* * Produce the output on the channel. */ toWrite = BytesLeft(bufPtr); written = (chanPtr->typePtr->outputProc)(chanPtr->instanceData, RemovePoint(bufPtr), toWrite, &errorCode); /* * If the write failed completely attempt to start the asynchronous * flush mechanism and break out of this loop - do not attempt to * write any more output at this time. */ if (written < 0) { /* * If the last attempt to write was interrupted, simply retry. */ if (errorCode == EINTR) { errorCode = 0; continue; } /* * If the channel is non-blocking and we would have blocked, start * a background flushing handler and break out of the loop. */ if ((errorCode == EWOULDBLOCK) || (errorCode == EAGAIN)) { /* * This used to check for CHANNEL_NONBLOCKING, and panic if * the channel was blocking. However, it appears that setting * stdin to -blocking 0 has some effect on the stdout when * it's a tty channel (dup'ed underneath) */ if (!(statePtr->flags & BG_FLUSH_SCHEDULED)) { SetFlag(statePtr, BG_FLUSH_SCHEDULED); UpdateInterest(chanPtr); } errorCode = 0; break; } /* * Decide whether to report the error upwards or defer it. */ if (calledFromAsyncFlush) { /* * TIP #219, Tcl Channel Reflection API. * When defering the error copy a message from the bypass into * the unreported area. Or discard it if the new error is to be * ignored in favor of an earlier defered error. */ Tcl_Obj *msg = statePtr->chanMsg; if (statePtr->unreportedError == 0) { statePtr->unreportedError = errorCode; statePtr->unreportedMsg = msg; if (msg != NULL) { Tcl_IncrRefCount(msg); } } else { /* * An old unreported error is kept, and this error thrown * away. */ statePtr->chanMsg = NULL; if (msg != NULL) { TclDecrRefCount(msg); } } } else { /* * TIP #219, Tcl Channel Reflection API. * Move error messages put by the driver into the chan bypass * area into the regular interpreter result. Fall back to the * regular message if nothing was found in the bypasses. */ Tcl_SetErrno(errorCode); if (interp != NULL && !TclChanCaughtErrorBypass(interp, (Tcl_Channel) chanPtr)) { /* * Casting away const here is safe because the * TCL_VOLATILE flag guarantees const treatment of the * Posix error string. */ Tcl_SetResult(interp, (char *) Tcl_PosixError(interp), TCL_VOLATILE); } /* * An unreportable bypassed message is kept, for the caller of * Tcl_Seek, Tcl_Write, etc. */ } /* * When we get an error we throw away all the output currently * queued. */ DiscardOutputQueued(statePtr); continue; } else { wroteSome = 1; } bufPtr->nextRemoved += written; /* * If this buffer is now empty, recycle it. */ if (IsBufferEmpty(bufPtr)) { statePtr->outQueueHead = bufPtr->nextPtr; if (statePtr->outQueueHead == NULL) { statePtr->outQueueTail = NULL; } RecycleBuffer(statePtr, bufPtr, 0); } } /* Closes "while (1)". */ /* * If we wrote some data while flushing in the background, we are done. * We can't finish the background flush until we run out of data and the * channel becomes writable again. This ensures that all of the pending * data has been flushed at the system level. */ if (statePtr->flags & BG_FLUSH_SCHEDULED) { if (wroteSome) { return errorCode; } else if (statePtr->outQueueHead == NULL) { ResetFlag(statePtr, BG_FLUSH_SCHEDULED); (chanPtr->typePtr->watchProc)(chanPtr->instanceData, statePtr->interestMask); } } /* * If the channel is flagged as closed, delete it when the refCount drops * to zero, the output queue is empty and there is no output in the * current output buffer. */ if ((statePtr->flags & CHANNEL_CLOSED) && (statePtr->refCount <= 0) && (statePtr->outQueueHead == NULL) && ((statePtr->curOutPtr == NULL) || IsBufferEmpty(statePtr->curOutPtr))) { return CloseChannel(interp, chanPtr, errorCode); } return errorCode; } /* *---------------------------------------------------------------------- * * CloseChannel -- * * Utility procedure to close a channel and free associated resources. * * If the channel was stacked, then the it will copy the necessary * elements of the NEXT channel into the TOP channel, in essence * unstacking the channel. The NEXT channel will then be freed. * * If the channel was not stacked, then we will free all the bits for the * TOP channel, including the data structure itself. * * Results: * Error code from an unreported error or the driver close operation. * * Side effects: * May close the actual channel, may free memory, may change the value of * errno. * *---------------------------------------------------------------------- */ static int CloseChannel( Tcl_Interp *interp, /* For error reporting. */ Channel *chanPtr, /* The channel to close. */ int errorCode) /* Status of operation so far. */ { int result = 0; /* Of calling driver close operation. */ ChannelState *statePtr; /* State of the channel stack. */ ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if (chanPtr == NULL) { return result; } statePtr = chanPtr->state; /* * No more input can be consumed so discard any leftover input. */ DiscardInputQueued(statePtr, 1); /* * Discard a leftover buffer in the current output buffer field. */ if (statePtr->curOutPtr != NULL) { ckfree((char *) statePtr->curOutPtr); statePtr->curOutPtr = NULL; } /* * The caller guarantees that there are no more buffers queued for output. */ if (statePtr->outQueueHead != NULL) { Tcl_Panic("TclFlush, closed channel: queued output left"); } /* * If the EOF character is set in the channel, append that to the output * device. */ if ((statePtr->outEofChar != 0) && (statePtr->flags & TCL_WRITABLE)) { int dummy; char c = (char) statePtr->outEofChar; (chanPtr->typePtr->outputProc)(chanPtr->instanceData, &c, 1, &dummy); } /* * TIP #219, Tcl Channel Reflection API. * Move a leftover error message in the channel bypass into the * interpreter bypass. Just clear it if there is no interpreter. */ if (statePtr->chanMsg != NULL) { if (interp != NULL) { Tcl_SetChannelErrorInterp(interp,statePtr->chanMsg); } TclDecrRefCount(statePtr->chanMsg); statePtr->chanMsg = NULL; } /* * Remove this channel from of the list of all channels. */ CutChannel((Tcl_Channel) chanPtr); /* * Close and free the channel driver state. * This may leave a TIP #219 error message in the interp. */ if (chanPtr->typePtr->closeProc != TCL_CLOSE2PROC) { result = (chanPtr->typePtr->closeProc)(chanPtr->instanceData, interp); } else { result = (chanPtr->typePtr->close2Proc)(chanPtr->instanceData, interp, 0); } /* * Some resources can be cleared only if the bottom channel in a stack is * closed. All the other channels in the stack are not allowed to remove. */ if (chanPtr == statePtr->bottomChanPtr) { if (statePtr->channelName != NULL) { ckfree((char *) statePtr->channelName); statePtr->channelName = NULL; } Tcl_FreeEncoding(statePtr->encoding); if (statePtr->outputStage != NULL) { ckfree((char *) statePtr->outputStage); statePtr->outputStage = NULL; } } /* * If we are being called synchronously, report either any latent error on * the channel or the current error. */ if (statePtr->unreportedError != 0) { errorCode = statePtr->unreportedError; /* * TIP #219, Tcl Channel Reflection API. * Move an error message found in the unreported area into the regular * bypass (interp). This kills any message in the channel bypass area. */ if (statePtr->chanMsg != NULL) { TclDecrRefCount(statePtr->chanMsg); statePtr->chanMsg = NULL; } if (interp) { Tcl_SetChannelErrorInterp(interp,statePtr->unreportedMsg); } } if (errorCode == 0) { errorCode = result; if (errorCode != 0) { Tcl_SetErrno(errorCode); } } /* * Cancel any outstanding timer. */ Tcl_DeleteTimerHandler(statePtr->timer); /* * Mark the channel as deleted by clearing the type structure. */ if (chanPtr->downChanPtr != NULL) { Channel *downChanPtr = chanPtr->downChanPtr; statePtr->nextCSPtr = tsdPtr->firstCSPtr; tsdPtr->firstCSPtr = statePtr; statePtr->topChanPtr = downChanPtr; downChanPtr->upChanPtr = NULL; chanPtr->typePtr = NULL; Tcl_EventuallyFree(chanPtr, TCL_DYNAMIC); return Tcl_Close(interp, (Tcl_Channel) downChanPtr); } /* * There is only the TOP Channel, so we free the remaining pointers we * have and then ourselves. Since this is the last of the channels in the * stack, make sure to free the ChannelState structure associated with it. * We use Tcl_EventuallyFree to allow for any last references. */ chanPtr->typePtr = NULL; Tcl_EventuallyFree(statePtr, TCL_DYNAMIC); Tcl_EventuallyFree(chanPtr, TCL_DYNAMIC); return errorCode; } /* *---------------------------------------------------------------------- * * Tcl_CutChannel -- * CutChannel -- * * Removes a channel from the (thread-)global list of all channels (in * that thread). This is actually the statePtr for the stack of channel. * * Results: * Nothing. * * Side effects: * Resets the field 'nextCSPtr' of the specified channel state to NULL. * * NOTE: * The channel to cut out of the list must not be referenced in any * interpreter. This is something this procedure cannot check (despite * the refcount) because the caller usually wants fiddle with the channel * (like transfering it to a different thread) and thus keeps the * refcount artifically high to prevent its destruction. * *---------------------------------------------------------------------- */ static void CutChannel( Tcl_Channel chan) /* The channel being removed. Must not be * referenced in any interpreter. */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); ChannelState *prevCSPtr; /* Preceding channel state in list of all * states - used to splice a channel out of * the list on close. */ ChannelState *statePtr = ((Channel *) chan)->state; /* State of the channel stack. */ Tcl_DriverThreadActionProc *threadActionProc; /* * Remove this channel from of the list of all channels (in the current * thread). */ if (tsdPtr->firstCSPtr && (statePtr == tsdPtr->firstCSPtr)) { tsdPtr->firstCSPtr = statePtr->nextCSPtr; } else { for (prevCSPtr = tsdPtr->firstCSPtr; prevCSPtr && (prevCSPtr->nextCSPtr != statePtr); prevCSPtr = prevCSPtr->nextCSPtr) { /* Empty loop body. */ } if (prevCSPtr == NULL) { Tcl_Panic("FlushChannel: damaged channel list"); } prevCSPtr->nextCSPtr = statePtr->nextCSPtr; } statePtr->nextCSPtr = NULL; /* * TIP #218, Channel Thread Actions */ threadActionProc = Tcl_ChannelThreadActionProc(Tcl_GetChannelType(chan)); if (threadActionProc != NULL) { (*threadActionProc)(Tcl_GetChannelInstanceData(chan), TCL_CHANNEL_THREAD_REMOVE); } } void Tcl_CutChannel( Tcl_Channel chan) /* The channel being added. Must not be * referenced in any interpreter. */ { Channel *chanPtr = ((Channel *) chan)->state->bottomChanPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); ChannelState *prevCSPtr; /* Preceding channel state in list of all * states - used to splice a channel out of * the list on close. */ ChannelState *statePtr = chanPtr->state; /* State of the channel stack. */ Tcl_DriverThreadActionProc *threadActionProc; /* * Remove this channel from of the list of all channels (in the current * thread). */ if (tsdPtr->firstCSPtr && (statePtr == tsdPtr->firstCSPtr)) { tsdPtr->firstCSPtr = statePtr->nextCSPtr; } else { for (prevCSPtr = tsdPtr->firstCSPtr; prevCSPtr && (prevCSPtr->nextCSPtr != statePtr); prevCSPtr = prevCSPtr->nextCSPtr) { /* Empty loop body. */ } if (prevCSPtr == NULL) { Tcl_Panic("FlushChannel: damaged channel list"); } prevCSPtr->nextCSPtr = statePtr->nextCSPtr; } statePtr->nextCSPtr = NULL; /* * TIP #218, Channel Thread Actions * For all transformations and the base channel. */ while (chanPtr) { threadActionProc = Tcl_ChannelThreadActionProc(chanPtr->typePtr); if (threadActionProc != NULL) { (*threadActionProc)(chanPtr->instanceData, TCL_CHANNEL_THREAD_REMOVE); } chanPtr= chanPtr->upChanPtr; } } /* *---------------------------------------------------------------------- * * Tcl_SpliceChannel -- * SpliceChannel -- * * Adds a channel to the (thread-)global list of all channels (in that * thread). Expects that the field 'nextChanPtr' in the channel is set to * NULL. * * Results: * Nothing. * * Side effects: * Nothing. * * NOTE: * The channel to splice into the list must not be referenced in any * interpreter. This is something this procedure cannot check (despite * the refcount) because the caller usually wants figgle with the channel * (like transfering it to a different thread) and thus keeps the * refcount artifically high to prevent its destruction. * *---------------------------------------------------------------------- */ static void SpliceChannel( Tcl_Channel chan) /* The channel being added. Must not be * referenced in any interpreter. */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); ChannelState *statePtr = ((Channel *) chan)->state; Tcl_DriverThreadActionProc *threadActionProc; if (statePtr->nextCSPtr != NULL) { Tcl_Panic("SpliceChannel: trying to add channel used in different list"); } statePtr->nextCSPtr = tsdPtr->firstCSPtr; tsdPtr->firstCSPtr = statePtr; /* * TIP #10. Mark the current thread as the new one managing this channel. * Note: 'Tcl_GetCurrentThread' returns sensible values even for * a non-threaded core. */ statePtr->managingThread = Tcl_GetCurrentThread(); /* * TIP #218, Channel Thread Actions */ threadActionProc = Tcl_ChannelThreadActionProc(Tcl_GetChannelType(chan)); if (threadActionProc != NULL) { (*threadActionProc) (Tcl_GetChannelInstanceData(chan), TCL_CHANNEL_THREAD_INSERT); } } void Tcl_SpliceChannel( Tcl_Channel chan) /* The channel being added. Must not be * referenced in any interpreter. */ { Channel *chanPtr = ((Channel *) chan)->state->bottomChanPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); ChannelState *statePtr = chanPtr->state; Tcl_DriverThreadActionProc *threadActionProc; if (statePtr->nextCSPtr != NULL) { Tcl_Panic("SpliceChannel: trying to add channel used in different list"); } statePtr->nextCSPtr = tsdPtr->firstCSPtr; tsdPtr->firstCSPtr = statePtr; /* * TIP #10. Mark the current thread as the new one managing this channel. * Note: 'Tcl_GetCurrentThread' returns sensible values even for * a non-threaded core. */ statePtr->managingThread = Tcl_GetCurrentThread(); /* * TIP #218, Channel Thread Actions * For all transformations and the base channel. */ while (chanPtr) { threadActionProc = Tcl_ChannelThreadActionProc(chanPtr->typePtr); if (threadActionProc != NULL) { (*threadActionProc)(chanPtr->instanceData, TCL_CHANNEL_THREAD_INSERT); } chanPtr= chanPtr->upChanPtr; } } /* *---------------------------------------------------------------------- * * Tcl_Close -- * * Closes a channel. * * Results: * A standard Tcl result. * * Side effects: * Closes the channel if this is the last reference. * * NOTE: * Tcl_Close removes the channel as far as the user is concerned. * However, it may continue to exist for a while longer if it has a * background flush scheduled. The device itself is eventually closed and * the channel record removed, in CloseChannel, above. * *---------------------------------------------------------------------- */ /* ARGSUSED */ int Tcl_Close( Tcl_Interp *interp, /* Interpreter for errors. */ Tcl_Channel chan) /* The channel being closed. Must not be * referenced in any interpreter. */ { CloseCallback *cbPtr; /* Iterate over close callbacks for this * channel. */ Channel *chanPtr; /* The real IO channel. */ ChannelState *statePtr; /* State of real IO channel. */ int result; /* Of calling FlushChannel. */ int flushcode; if (chan == NULL) { return TCL_OK; } /* * Perform special handling for standard channels being closed. If the * refCount is now 1 it means that the last reference to the standard * channel is being explicitly closed, so bump the refCount down * artificially to 0. This will ensure that the channel is actually * closed, below. Also set the static pointer to NULL for the channel. */ CheckForStdChannelsBeingClosed(chan); /* * This operation should occur at the top of a channel stack. */ chanPtr = (Channel *) chan; statePtr = chanPtr->state; chanPtr = statePtr->topChanPtr; if (statePtr->refCount > 0) { Tcl_Panic("called Tcl_Close on channel with refCount > 0"); } if (statePtr->flags & CHANNEL_INCLOSE) { if (interp) { Tcl_AppendResult(interp, "Illegal recursive call to close " "through close-handler of channel", NULL); } return TCL_ERROR; } SetFlag(statePtr, CHANNEL_INCLOSE); /* * When the channel has an escape sequence driven encoding such as * iso2022, the terminated escape sequence must write to the buffer. */ if ((statePtr->encoding != NULL) && (statePtr->curOutPtr != NULL) && (CheckChannelErrors(statePtr, TCL_WRITABLE) == 0)) { statePtr->outputEncodingFlags |= TCL_ENCODING_END; WriteChars(chanPtr, "", 0); /* * TIP #219, Tcl Channel Reflection API. * Move an error message found in the channel bypass into the * interpreter bypass. Just clear it if there is no interpreter. */ if (statePtr->chanMsg != NULL) { if (interp != NULL) { Tcl_SetChannelErrorInterp(interp,statePtr->chanMsg); } TclDecrRefCount(statePtr->chanMsg); statePtr->chanMsg = NULL; } } Tcl_ClearChannelHandlers(chan); /* * Invoke the registered close callbacks and delete their records. */ while (statePtr->closeCbPtr != NULL) { cbPtr = statePtr->closeCbPtr; statePtr->closeCbPtr = cbPtr->nextPtr; (cbPtr->proc)(cbPtr->clientData); ckfree((char *) cbPtr); } ResetFlag(statePtr, CHANNEL_INCLOSE); /* * Ensure that the last output buffer will be flushed. */ if ((statePtr->curOutPtr != NULL) && IsBufferReady(statePtr->curOutPtr)) { SetFlag(statePtr, BUFFER_READY); } /* * If this channel supports it, close the read side, since we don't need * it anymore and this will help avoid deadlocks on some channel types. */ if (chanPtr->typePtr->closeProc == TCL_CLOSE2PROC) { result = (chanPtr->typePtr->close2Proc)(chanPtr->instanceData, interp, TCL_CLOSE_READ); } else { result = 0; } /* * The call to FlushChannel will flush any queued output and invoke the * close function of the channel driver, or it will set up the channel to * be flushed and closed asynchronously. */ SetFlag(statePtr, CHANNEL_CLOSED); flushcode = FlushChannel(interp, chanPtr, 0); /* * TIP #219. * Capture error messages put by the driver into the bypass area and put * them into the regular interpreter result. * * Notes: Due to the assertion of CHANNEL_CLOSED in the flags * FlushChannel() has called CloseChannel() and thus freed all the channel * structures. We must not try to access "chan" anymore, hence the NULL * argument in the call below. The only place which may still contain a * message is the interpreter itself, and "CloseChannel" made sure to lift * any channel message it generated into it. */ if (TclChanCaughtErrorBypass(interp, NULL)) { result = EINVAL; } if ((flushcode != 0) || (result != 0)) { return TCL_ERROR; } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_ClearChannelHandlers -- * * Removes all channel handlers and event scripts from the channel, * cancels all background copies involving the channel and any interest * in events. * * Results: * None. * * Side effects: * See above. Deallocates memory. * *---------------------------------------------------------------------- */ void Tcl_ClearChannelHandlers( Tcl_Channel channel) { ChannelHandler *chPtr, *chNext; /* Iterate over channel handlers. */ EventScriptRecord *ePtr, *eNextPtr; /* Iterate over eventscript records. */ Channel *chanPtr; /* The real IO channel. */ ChannelState *statePtr; /* State of real IO channel. */ ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); NextChannelHandler *nhPtr; /* * This operation should occur at the top of a channel stack. */ chanPtr = (Channel *) channel; statePtr = chanPtr->state; chanPtr = statePtr->topChanPtr; /* * Cancel any outstanding timer. */ Tcl_DeleteTimerHandler(statePtr->timer); /* * Remove any references to channel handlers for this channel that may be * about to be invoked. */ for (nhPtr = tsdPtr->nestedHandlerPtr; nhPtr != NULL; nhPtr = nhPtr->nestedHandlerPtr) { if (nhPtr->nextHandlerPtr && (nhPtr->nextHandlerPtr->chanPtr == chanPtr)) { nhPtr->nextHandlerPtr = NULL; } } /* * Remove all the channel handler records attached to the channel itself. */ for (chPtr = statePtr->chPtr; chPtr != NULL; chPtr = chNext) { chNext = chPtr->nextPtr; ckfree((char *) chPtr); } statePtr->chPtr = NULL; /* * Cancel any pending copy operation. */ StopCopy(statePtr->csPtrR); StopCopy(statePtr->csPtrW); /* * Must set the interest mask now to 0, otherwise infinite loops * will occur if Tcl_DoOneEvent is called before the channel is * finally deleted in FlushChannel. This can happen if the channel * has a background flush active. */ statePtr->interestMask = 0; /* * Remove any EventScript records for this channel. */ for (ePtr = statePtr->scriptRecordPtr; ePtr != NULL; ePtr = eNextPtr) { eNextPtr = ePtr->nextPtr; TclDecrRefCount(ePtr->scriptPtr); ckfree((char *) ePtr); } statePtr->scriptRecordPtr = NULL; } /* *---------------------------------------------------------------------- * * Tcl_Write -- * * Puts a sequence of bytes into an output buffer, may queue the buffer * for output if it gets full, and also remembers whether the current * buffer is ready e.g. if it contains a newline and we are in line * buffering mode. Compensates stacking, i.e. will redirect the data from * the specified channel to the topmost channel in a stack. * * No encoding conversions are applied to the bytes being read. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ int Tcl_Write( Tcl_Channel chan, /* The channel to buffer output for. */ const char *src, /* Data to queue in output buffer. */ int srcLen) /* Length of data in bytes, or < 0 for * strlen(). */ { /* * Always use the topmost channel of the stack */ Channel *chanPtr; ChannelState *statePtr; /* State info for channel */ statePtr = ((Channel *) chan)->state; chanPtr = statePtr->topChanPtr; if (CheckChannelErrors(statePtr, TCL_WRITABLE) != 0) { return -1; } if (srcLen < 0) { srcLen = strlen(src); } return DoWrite(chanPtr, src, srcLen); } /* *---------------------------------------------------------------------- * * Tcl_WriteRaw -- * * Puts a sequence of bytes into an output buffer, may queue the buffer * for output if it gets full, and also remembers whether the current * buffer is ready e.g. if it contains a newline and we are in line * buffering mode. Writes directly to the driver of the channel, does not * compensate for stacking. * * No encoding conversions are applied to the bytes being read. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ int Tcl_WriteRaw( Tcl_Channel chan, /* The channel to buffer output for. */ const char *src, /* Data to queue in output buffer. */ int srcLen) /* Length of data in bytes, or < 0 for * strlen(). */ { Channel *chanPtr = ((Channel *) chan); ChannelState *statePtr = chanPtr->state; /* State info for channel */ int errorCode, written; if (CheckChannelErrors(statePtr, TCL_WRITABLE | CHANNEL_RAW_MODE) != 0) { return -1; } if (srcLen < 0) { srcLen = strlen(src); } /* * Go immediately to the driver, do all the error handling by ourselves. * The code was stolen from 'FlushChannel'. */ written = (chanPtr->typePtr->outputProc) (chanPtr->instanceData, src, srcLen, &errorCode); if (written < 0) { Tcl_SetErrno(errorCode); } return written; } /* *--------------------------------------------------------------------------- * * Tcl_WriteChars -- * * Takes a sequence of UTF-8 characters and converts them for output * using the channel's current encoding, may queue the buffer for output * if it gets full, and also remembers whether the current buffer is * ready e.g. if it contains a newline and we are in line buffering * mode. Compensates stacking, i.e. will redirect the data from the * specified channel to the topmost channel in a stack. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ int Tcl_WriteChars( Tcl_Channel chan, /* The channel to buffer output for. */ const char *src, /* UTF-8 characters to queue in output * buffer. */ int len) /* Length of string in bytes, or < 0 for * strlen(). */ { ChannelState *statePtr; /* State info for channel */ statePtr = ((Channel *) chan)->state; if (CheckChannelErrors(statePtr, TCL_WRITABLE) != 0) { return -1; } return DoWriteChars((Channel *) chan, src, len); } /* *--------------------------------------------------------------------------- * * DoWriteChars -- * * Takes a sequence of UTF-8 characters and converts them for output * using the channel's current encoding, may queue the buffer for output * if it gets full, and also remembers whether the current buffer is * ready e.g. if it contains a newline and we are in line buffering mode. * Compensates stacking, i.e. will redirect the data from the specified * channel to the topmost channel in a stack. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ static int DoWriteChars( Channel *chanPtr, /* The channel to buffer output for. */ const char *src, /* UTF-8 characters to queue in output * buffer. */ int len) /* Length of string in bytes, or < 0 for * strlen(). */ { /* * Always use the topmost channel of the stack */ ChannelState *statePtr; /* State info for channel */ statePtr = chanPtr->state; chanPtr = statePtr->topChanPtr; if (len < 0) { len = strlen(src); } if (statePtr->encoding == NULL) { /* * Inefficient way to convert UTF-8 to byte-array, but the code * parallels the way it is done for objects. * Special case for 1-byte (used by eg [puts] for the \n) could * be extended to more efficient translation of the src string. */ int result; if ((len == 1) && (UCHAR(*src) < 0xC0)) { result = WriteBytes(chanPtr, src, len); } else { Tcl_Obj *objPtr = Tcl_NewStringObj(src, len); src = (char *) Tcl_GetByteArrayFromObj(objPtr, &len); result = WriteBytes(chanPtr, src, len); TclDecrRefCount(objPtr); } return result; } return WriteChars(chanPtr, src, len); } /* *--------------------------------------------------------------------------- * * Tcl_WriteObj -- * * Takes the Tcl object and queues its contents for output. If the * encoding of the channel is NULL, takes the byte-array representation * of the object and queues those bytes for output. Otherwise, takes the * characters in the UTF-8 (string) representation of the object and * converts them for output using the channel's current encoding. May * flush internal buffers to output if one becomes full or is ready for * some other reason, e.g. if it contains a newline and the channel is in * line buffering mode. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno() will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ int Tcl_WriteObj( Tcl_Channel chan, /* The channel to buffer output for. */ Tcl_Obj *objPtr) /* The object to write. */ { /* * Always use the topmost channel of the stack */ Channel *chanPtr; ChannelState *statePtr; /* State info for channel */ char *src; int srcLen; statePtr = ((Channel *) chan)->state; chanPtr = statePtr->topChanPtr; if (CheckChannelErrors(statePtr, TCL_WRITABLE) != 0) { return -1; } if (statePtr->encoding == NULL) { src = (char *) Tcl_GetByteArrayFromObj(objPtr, &srcLen); return WriteBytes(chanPtr, src, srcLen); } else { src = TclGetStringFromObj(objPtr, &srcLen); return WriteChars(chanPtr, src, srcLen); } } /* *---------------------------------------------------------------------- * * WriteBytes -- * * Write a sequence of bytes into an output buffer, may queue the buffer * for output if it gets full, and also remembers whether the current * buffer is ready e.g. if it contains a newline and we are in line * buffering mode. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ static int WriteBytes( Channel *chanPtr, /* The channel to buffer output for. */ const char *src, /* Bytes to write. */ int srcLen) /* Number of bytes to write. */ { ChannelState *statePtr = chanPtr->state; /* State info for channel */ ChannelBuffer *bufPtr; char *dst; int dstMax, sawLF, savedLF, total, dstLen, toWrite, translate; total = 0; sawLF = 0; savedLF = 0; translate = (statePtr->flags & CHANNEL_LINEBUFFERED) || (statePtr->outputTranslation != TCL_TRANSLATE_LF); /* * Loop over all bytes in src, storing them in output buffer with proper * EOL translation. */ while (srcLen + savedLF > 0) { bufPtr = statePtr->curOutPtr; if (bufPtr == NULL) { bufPtr = AllocChannelBuffer(statePtr->bufSize); statePtr->curOutPtr = bufPtr; } dst = InsertPoint(bufPtr); dstMax = SpaceLeft(bufPtr); dstLen = dstMax; toWrite = dstLen; if (toWrite > srcLen) { toWrite = srcLen; } if (translate) { if (savedLF) { /* * A '\n' was left over from last call to TranslateOutputEOL() * and we need to store it in this buffer. If the channel is * line-based, we will need to flush it. */ *dst++ = '\n'; dstLen--; sawLF++; } if (TranslateOutputEOL(statePtr, dst, src, &dstLen, &toWrite)) { sawLF++; } dstLen += savedLF; savedLF = 0; if (dstLen > dstMax) { savedLF = 1; dstLen = dstMax; } } else { memcpy(dst, src, toWrite); dstLen = toWrite; } bufPtr->nextAdded += dstLen; if (CheckFlush(chanPtr, bufPtr, sawLF) != 0) { return -1; } total += dstLen; src += toWrite; srcLen -= toWrite; sawLF = 0; } return total; } /* *---------------------------------------------------------------------- * * WriteChars -- * * Convert UTF-8 bytes to the channel's external encoding and write the * produced bytes into an output buffer, may queue the buffer for output * if it gets full, and also remembers whether the current buffer is * ready e.g. if it contains a newline and we are in line buffering mode. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ static int WriteChars( Channel *chanPtr, /* The channel to buffer output for. */ const char *src, /* UTF-8 string to write. */ int srcLen) /* Length of UTF-8 string in bytes. */ { ChannelState *statePtr = chanPtr->state; /* State info for channel */ ChannelBuffer *bufPtr; char *dst, *stage; int saved, savedLF, sawLF, total, dstLen, stageMax, dstWrote; int stageLen, toWrite, stageRead, endEncoding, result; int consumedSomething, translate; Tcl_Encoding encoding; char safe[BUFFER_PADDING]; total = 0; sawLF = 0; savedLF = 0; saved = 0; encoding = statePtr->encoding; /* * Write the terminated escape sequence even if srcLen is 0. */ endEncoding = ((statePtr->outputEncodingFlags & TCL_ENCODING_END) != 0); translate = (statePtr->flags & CHANNEL_LINEBUFFERED) || (statePtr->outputTranslation != TCL_TRANSLATE_LF); /* * Loop over all UTF-8 characters in src, storing them in staging buffer * with proper EOL translation. */ consumedSomething = 1; while (consumedSomething && (srcLen + savedLF + endEncoding > 0)) { consumedSomething = 0; stage = statePtr->outputStage; stageMax = statePtr->bufSize; stageLen = stageMax; toWrite = stageLen; if (toWrite > srcLen) { toWrite = srcLen; } if (translate) { if (savedLF) { /* * A '\n' was left over from last call to TranslateOutputEOL() * and we need to store it in the staging buffer. If the channel * is line-based, we will need to flush the output buffer (after * translating the staging buffer). */ *stage++ = '\n'; stageLen--; sawLF++; } if (TranslateOutputEOL(statePtr, stage, src, &stageLen, &toWrite)) { sawLF++; } stage -= savedLF; stageLen += savedLF; savedLF = 0; if (stageLen > stageMax) { savedLF = 1; stageLen = stageMax; } } else { memcpy(stage, src, toWrite); stageLen = toWrite; } src += toWrite; srcLen -= toWrite; /* * Loop over all UTF-8 characters in staging buffer, converting them * to external encoding, storing them in output buffer. */ while (stageLen + saved + endEncoding > 0) { bufPtr = statePtr->curOutPtr; if (bufPtr == NULL) { bufPtr = AllocChannelBuffer(statePtr->bufSize); statePtr->curOutPtr = bufPtr; } dst = InsertPoint(bufPtr); dstLen = SpaceLeft(bufPtr); if (saved != 0) { /* * Here's some translated bytes left over from the last buffer * that we need to stick at the beginning of this buffer. */ memcpy(dst, safe, (size_t) saved); bufPtr->nextAdded += saved; dst += saved; dstLen -= saved; saved = 0; } result = Tcl_UtfToExternal(NULL, encoding, stage, stageLen, statePtr->outputEncodingFlags, &statePtr->outputEncodingState, dst, dstLen + BUFFER_PADDING, &stageRead, &dstWrote, NULL); /* * Fix for SF #506297, reported by Martin Forssen * . * * The encoding chosen in the script exposing the bug writes out * three intro characters when TCL_ENCODING_START is set, but does * not consume any input as TCL_ENCODING_END is cleared. As some * output was generated the enclosing loop calls UtfToExternal * again, again with START set. Three more characters in the out * and still no use of input ... To break this infinite loop we * remove TCL_ENCODING_START from the set of flags after the first * call (no condition is required, the later calls remove an unset * flag, which is a no-op). This causes the subsequent calls to * UtfToExternal to consume and convert the actual input. */ statePtr->outputEncodingFlags &= ~TCL_ENCODING_START; /* * The following code must be executed only when result is not 0. */ if ((result != 0) && (stageRead + dstWrote == 0)) { /* * We have an incomplete UTF-8 character at the end of the * staging buffer. It will get moved to the beginning of the * staging buffer followed by more bytes from src. */ src -= stageLen; srcLen += stageLen; stageLen = 0; savedLF = 0; break; } bufPtr->nextAdded += dstWrote; if (IsBufferOverflowing(bufPtr)) { /* * When translating from UTF-8 to external encoding, we * allowed the translation to produce a character that crossed * the end of the output buffer, so that we would get a * completely full buffer before flushing it. The extra bytes * will be moved to the beginning of the next buffer. */ saved = -SpaceLeft(bufPtr); memcpy(safe, dst + dstLen, (size_t) saved); bufPtr->nextAdded = bufPtr->bufLength; } if (CheckFlush(chanPtr, bufPtr, sawLF) != 0) { return -1; } total += dstWrote; stage += stageRead; stageLen -= stageRead; sawLF = 0; consumedSomething = 1; /* * If all translated characters are written to the buffer, * endEncoding is set to 0 because the escape sequence may be * output. */ if ((stageLen + saved == 0) && (result == 0)) { endEncoding = 0; } } } /* * If nothing was written and it happened because there was no progress in * the UTF conversion, we throw an error. */ if (!consumedSomething && (total == 0)) { Tcl_SetErrno(EINVAL); return -1; } return total; } /* *--------------------------------------------------------------------------- * * TranslateOutputEOL -- * * Helper function for WriteBytes() and WriteChars(). Converts the '\n' * characters in the source buffer into the appropriate EOL form * specified by the output translation mode. * * EOL translation stops either when the source buffer is empty or the * output buffer is full. * * When converting to CRLF mode and there is only 1 byte left in the * output buffer, this routine stores the '\r' in the last byte and then * stores the '\n' in the byte just past the end of the buffer. The * caller is responsible for passing in a buffer that is large enough to * hold the extra byte. * * Results: * The return value is 1 if a '\n' was translated from the source buffer, * or 0 otherwise -- this can be used by the caller to decide to flush a * line-based channel even though the channel buffer is not full. * * *dstLenPtr is filled with how many bytes of the output buffer were * used. As mentioned above, this can be one more that the output * buffer's specified length if a CRLF was stored. * * *srcLenPtr is filled with how many bytes of the source buffer were * consumed. * * Side effects: * It may be obvious, but bears mentioning that when converting in CRLF * mode (which requires two bytes of storage in the output buffer), the * number of bytes consumed from the source buffer will be less than the * number of bytes stored in the output buffer. * *--------------------------------------------------------------------------- */ static int TranslateOutputEOL( ChannelState *statePtr, /* Channel being read, for translation and * buffering modes. */ char *dst, /* Output buffer filled with UTF-8 chars by * applying appropriate EOL translation to * source characters. */ const char *src, /* Source UTF-8 characters. */ int *dstLenPtr, /* On entry, the maximum length of output * buffer in bytes. On exit, the number of * bytes actually used in output buffer. */ int *srcLenPtr) /* On entry, the length of source buffer. On * exit, the number of bytes read from the * source buffer. */ { char *dstEnd; int srcLen, newlineFound; newlineFound = 0; srcLen = *srcLenPtr; switch (statePtr->outputTranslation) { case TCL_TRANSLATE_LF: for (dstEnd = dst + srcLen; dst < dstEnd; ) { if (*src == '\n') { newlineFound = 1; } *dst++ = *src++; } *dstLenPtr = srcLen; break; case TCL_TRANSLATE_CR: for (dstEnd = dst + srcLen; dst < dstEnd;) { if (*src == '\n') { *dst++ = '\r'; newlineFound = 1; src++; } else { *dst++ = *src++; } } *dstLenPtr = srcLen; break; case TCL_TRANSLATE_CRLF: { /* * Since this causes the number of bytes to grow, we start off trying * to put 'srcLen' bytes into the output buffer, but allow it to store * more bytes, as long as there's still source bytes and room in the * output buffer. */ char *dstStart, *dstMax; const char *srcStart; dstStart = dst; dstMax = dst + *dstLenPtr; srcStart = src; if (srcLen < *dstLenPtr) { dstEnd = dst + srcLen; } else { dstEnd = dst + *dstLenPtr; } while (dst < dstEnd) { if (*src == '\n') { if (dstEnd < dstMax) { dstEnd++; } *dst++ = '\r'; newlineFound = 1; } *dst++ = *src++; } *srcLenPtr = src - srcStart; *dstLenPtr = dst - dstStart; break; } default: break; } return newlineFound; } /* *--------------------------------------------------------------------------- * * CheckFlush -- * * Helper function for WriteBytes() and WriteChars(). If the channel * buffer is ready to be flushed, flush it. * * Results: * The return value is -1 if there was a problem flushing the channel * buffer, or 0 otherwise. * * Side effects: * The buffer will be recycled if it is flushed. * *--------------------------------------------------------------------------- */ static int CheckFlush( Channel *chanPtr, /* Channel being read, for buffering mode. */ ChannelBuffer *bufPtr, /* Channel buffer to possibly flush. */ int newlineFlag) /* Non-zero if a the channel buffer contains a * newline. */ { ChannelState *statePtr = chanPtr->state; /* State info for channel */ /* * The current buffer is ready for output: * 1. if it is full. * 2. if it contains a newline and this channel is line-buffered. * 3. if it contains any output and this channel is unbuffered. */ if ((statePtr->flags & BUFFER_READY) == 0) { if (IsBufferFull(bufPtr)) { SetFlag(statePtr, BUFFER_READY); } else if (statePtr->flags & CHANNEL_LINEBUFFERED) { if (newlineFlag != 0) { SetFlag(statePtr, BUFFER_READY); } } else if (statePtr->flags & CHANNEL_UNBUFFERED) { SetFlag(statePtr, BUFFER_READY); } } if (statePtr->flags & BUFFER_READY) { if (FlushChannel(NULL, chanPtr, 0) != 0) { return -1; } } return 0; } /* *--------------------------------------------------------------------------- * * Tcl_Gets -- * * Reads a complete line of input from the channel into a Tcl_DString. * * Results: * Length of line read (in characters) or -1 if error, EOF, or blocked. * If -1, use Tcl_GetErrno() to retrieve the POSIX error code for the * error or condition that occurred. * * Side effects: * May flush output on the channel. May cause input to be consumed from * the channel. * *--------------------------------------------------------------------------- */ int Tcl_Gets( Tcl_Channel chan, /* Channel from which to read. */ Tcl_DString *lineRead) /* The line read will be appended to this * DString as UTF-8 characters. The caller * must have initialized it and is responsible * for managing the storage. */ { Tcl_Obj *objPtr; int charsStored, length; char *string; TclNewObj(objPtr); charsStored = Tcl_GetsObj(chan, objPtr); if (charsStored > 0) { string = TclGetStringFromObj(objPtr, &length); Tcl_DStringAppend(lineRead, string, length); } TclDecrRefCount(objPtr); return charsStored; } /* *--------------------------------------------------------------------------- * * Tcl_GetsObj -- * * Accumulate input from the input channel until end-of-line or * end-of-file has been seen. Bytes read from the input channel are * converted to UTF-8 using the encoding specified by the channel. * * Results: * Number of characters accumulated in the object or -1 if error, * blocked, or EOF. If -1, use Tcl_GetErrno() to retrieve the POSIX error * code for the error or condition that occurred. * * Side effects: * Consumes input from the channel. * * On reading EOF, leave channel pointing at EOF char. On reading EOL, * leave channel pointing after EOL, but don't return EOL in dst buffer. * *--------------------------------------------------------------------------- */ int Tcl_GetsObj( Tcl_Channel chan, /* Channel from which to read. */ Tcl_Obj *objPtr) /* The line read will be appended to this * object as UTF-8 characters. */ { GetsState gs; Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* State info for channel */ ChannelBuffer *bufPtr; int inEofChar, skip, copiedTotal, oldLength, oldFlags, oldRemoved; Tcl_Encoding encoding; char *dst, *dstEnd, *eol, *eof; Tcl_EncodingState oldState; if (CheckChannelErrors(statePtr, TCL_READABLE) != 0) { copiedTotal = -1; goto done; } /* * A binary version of Tcl_GetsObj. This could also handle encodings that * are ascii-7 pure (iso8859, utf-8, ...) with a final encoding conversion * done on objPtr. */ if ((statePtr->encoding == NULL) && ((statePtr->inputTranslation == TCL_TRANSLATE_LF) || (statePtr->inputTranslation == TCL_TRANSLATE_CR))) { return TclGetsObjBinary(chan, objPtr); } /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; bufPtr = statePtr->inQueueHead; encoding = statePtr->encoding; /* * Preserved so we can restore the channel's state in case we don't find a * newline in the available input. */ TclGetStringFromObj(objPtr, &oldLength); oldFlags = statePtr->inputEncodingFlags; oldState = statePtr->inputEncodingState; oldRemoved = BUFFER_PADDING; if (bufPtr != NULL) { oldRemoved = bufPtr->nextRemoved; } /* * If there is no encoding, use "iso8859-1" -- Tcl_GetsObj() doesn't * produce ByteArray objects. */ if (encoding == NULL) { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if (tsdPtr->binaryEncoding == NULL) { tsdPtr->binaryEncoding = Tcl_GetEncoding(NULL, "iso8859-1"); Tcl_CreateThreadExitHandler(FreeBinaryEncoding, NULL); } encoding = tsdPtr->binaryEncoding; if (encoding == NULL) { Tcl_Panic("attempted gets on binary channel where no iso8859-1 encoding available"); } } /* * Object used by FilterInputBytes to keep track of how much data has been * consumed from the channel buffers. */ gs.objPtr = objPtr; gs.dstPtr = &dst; gs.encoding = encoding; gs.bufPtr = bufPtr; gs.state = oldState; gs.rawRead = 0; gs.bytesWrote = 0; gs.charsWrote = 0; gs.totalChars = 0; dst = objPtr->bytes + oldLength; dstEnd = dst; skip = 0; eof = NULL; inEofChar = statePtr->inEofChar; while (1) { if (dst >= dstEnd) { if (FilterInputBytes(chanPtr, &gs) != 0) { goto restore; } dstEnd = dst + gs.bytesWrote; } /* * Remember if EOF char is seen, then look for EOL anyhow, because the * EOL might be before the EOF char. */ if (inEofChar != '\0') { for (eol = dst; eol < dstEnd; eol++) { if (*eol == inEofChar) { dstEnd = eol; eof = eol; break; } } } /* * On EOL, leave current file position pointing after the EOL, but * don't store the EOL in the output string. */ switch (statePtr->inputTranslation) { case TCL_TRANSLATE_LF: for (eol = dst; eol < dstEnd; eol++) { if (*eol == '\n') { skip = 1; goto gotEOL; } } break; case TCL_TRANSLATE_CR: for (eol = dst; eol < dstEnd; eol++) { if (*eol == '\r') { skip = 1; goto gotEOL; } } break; case TCL_TRANSLATE_CRLF: for (eol = dst; eol < dstEnd; eol++) { if (*eol == '\r') { eol++; /* * If a CR is at the end of the buffer, then check for a * LF at the begining of the next buffer, unless EOF char * was found already. */ if (eol >= dstEnd) { int offset; if (eol != eof) { offset = eol - objPtr->bytes; dst = dstEnd; if (FilterInputBytes(chanPtr, &gs) != 0) { goto restore; } dstEnd = dst + gs.bytesWrote; eol = objPtr->bytes + offset; } if (eol >= dstEnd) { skip = 0; goto gotEOL; } } if (*eol == '\n') { eol--; skip = 2; goto gotEOL; } } } break; case TCL_TRANSLATE_AUTO: eol = dst; skip = 1; if (statePtr->flags & INPUT_SAW_CR) { ResetFlag(statePtr, INPUT_SAW_CR); if ((eol < dstEnd) && (*eol == '\n')) { /* * Skip the raw bytes that make up the '\n'. */ char tmp[1 + TCL_UTF_MAX]; int rawRead; bufPtr = gs.bufPtr; Tcl_ExternalToUtf(NULL, gs.encoding, RemovePoint(bufPtr), gs.rawRead, statePtr->inputEncodingFlags, &gs.state, tmp, 1 + TCL_UTF_MAX, &rawRead, NULL, NULL); bufPtr->nextRemoved += rawRead; gs.rawRead -= rawRead; gs.bytesWrote--; gs.charsWrote--; memmove(dst, dst + 1, (size_t) (dstEnd - dst)); dstEnd--; } } for (eol = dst; eol < dstEnd; eol++) { if (*eol == '\r') { eol++; if (eol == dstEnd) { /* * If buffer ended on \r, peek ahead to see if a \n is * available, unless EOF char was found already. */ if (eol != eof) { int offset; offset = eol - objPtr->bytes; dst = dstEnd; PeekAhead(chanPtr, &dstEnd, &gs); eol = objPtr->bytes + offset; } if (eol >= dstEnd) { eol--; SetFlag(statePtr, INPUT_SAW_CR); goto gotEOL; } } if (*eol == '\n') { skip++; } eol--; goto gotEOL; } else if (*eol == '\n') { goto gotEOL; } } } if (eof != NULL) { /* * EOF character was seen. On EOF, leave current file position * pointing at the EOF character, but don't store the EOF * character in the output string. */ dstEnd = eof; SetFlag(statePtr, CHANNEL_EOF | CHANNEL_STICKY_EOF); statePtr->inputEncodingFlags |= TCL_ENCODING_END; } if (statePtr->flags & CHANNEL_EOF) { skip = 0; eol = dstEnd; if (eol == objPtr->bytes + oldLength) { /* * If we didn't append any bytes before encountering EOF, * caller needs to see -1. */ Tcl_SetObjLength(objPtr, oldLength); CommonGetsCleanup(chanPtr); copiedTotal = -1; goto done; } goto gotEOL; } dst = dstEnd; } /* * Found EOL or EOF, but the output buffer may now contain too many UTF-8 * characters. We need to know how many raw bytes correspond to the number * of UTF-8 characters we want, plus how many raw bytes correspond to the * character(s) making up EOL (if any), so we can remove the correct * number of bytes from the channel buffer. */ gotEOL: bufPtr = gs.bufPtr; if (bufPtr == NULL) { Tcl_Panic("Tcl_GetsObj: gotEOL reached with bufPtr==NULL"); } statePtr->inputEncodingState = gs.state; Tcl_ExternalToUtf(NULL, gs.encoding, RemovePoint(bufPtr), gs.rawRead, statePtr->inputEncodingFlags, &statePtr->inputEncodingState, dst, eol - dst + skip + TCL_UTF_MAX, &gs.rawRead, NULL, &gs.charsWrote); bufPtr->nextRemoved += gs.rawRead; /* * Recycle all the emptied buffers. */ Tcl_SetObjLength(objPtr, eol - objPtr->bytes); CommonGetsCleanup(chanPtr); ResetFlag(statePtr, CHANNEL_BLOCKED); copiedTotal = gs.totalChars + gs.charsWrote - skip; goto done; /* * Couldn't get a complete line. This only happens if we get a error * reading from the channel or we are non-blocking and there wasn't an EOL * or EOF in the data available. */ restore: bufPtr = statePtr->inQueueHead; if (bufPtr == NULL) { Tcl_Panic("Tcl_GetsObj: restore reached with bufPtr==NULL"); } bufPtr->nextRemoved = oldRemoved; for (bufPtr = bufPtr->nextPtr; bufPtr != NULL; bufPtr = bufPtr->nextPtr) { bufPtr->nextRemoved = BUFFER_PADDING; } CommonGetsCleanup(chanPtr); statePtr->inputEncodingState = oldState; statePtr->inputEncodingFlags = oldFlags; Tcl_SetObjLength(objPtr, oldLength); /* * We didn't get a complete line so we need to indicate to UpdateInterest * that the gets blocked. It will wait for more data instead of firing a * timer, avoiding a busy wait. This is where we are assuming that the * next operation is a gets. No more file events will be delivered on this * channel until new data arrives or some operation is performed on the * channel (e.g. gets, read, fconfigure) that changes the blocking state. * Note that this means a file event will not be delivered even though a * read would be able to consume the buffered data. */ SetFlag(statePtr, CHANNEL_NEED_MORE_DATA); copiedTotal = -1; /* * Update the notifier state so we don't block while there is still data * in the buffers. */ done: UpdateInterest(chanPtr); return copiedTotal; } /* *--------------------------------------------------------------------------- * * TclGetsObjBinary -- * * A variation of Tcl_GetsObj that works directly on the buffers until * end-of-line or end-of-file has been seen. Bytes read from the input * channel return as a ByteArray obj. * * Results: * Number of characters accumulated in the object or -1 if error, * blocked, or EOF. If -1, use Tcl_GetErrno() to retrieve the POSIX error * code for the error or condition that occurred. * * Side effects: * Consumes input from the channel. * * On reading EOF, leave channel pointing at EOF char. On reading EOL, * leave channel pointing after EOL, but don't return EOL in dst buffer. * *--------------------------------------------------------------------------- */ static int TclGetsObjBinary( Tcl_Channel chan, /* Channel from which to read. */ Tcl_Obj *objPtr) /* The line read will be appended to this * object as UTF-8 characters. */ { Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* State info for channel */ ChannelBuffer *bufPtr; int inEofChar, skip, copiedTotal, oldLength, oldFlags, oldRemoved; int rawLen, byteLen, eolChar; unsigned char *dst, *dstEnd, *eol, *eof, *byteArray; /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; bufPtr = statePtr->inQueueHead; /* * Preserved so we can restore the channel's state in case we don't find a * newline in the available input. */ byteArray = Tcl_GetByteArrayFromObj(objPtr, &byteLen); oldFlags = statePtr->inputEncodingFlags; oldRemoved = BUFFER_PADDING; oldLength = byteLen; if (bufPtr != NULL) { oldRemoved = bufPtr->nextRemoved; } rawLen = 0; skip = 0; eof = NULL; inEofChar = statePtr->inEofChar; /* Only handle TCL_TRANSLATE_LF and TCL_TRANSLATE_CR */ eolChar = (statePtr->inputTranslation == TCL_TRANSLATE_LF) ? '\n' : '\r'; while (1) { /* * Subtract the number of bytes that were removed from channel * buffer during last call. */ if (bufPtr != NULL) { bufPtr->nextRemoved += rawLen; if (!IsBufferReady(bufPtr)) { bufPtr = bufPtr->nextPtr; } } if ((bufPtr == NULL) || (bufPtr->nextAdded == BUFFER_PADDING)) { /* * All channel buffers were exhausted and the caller still * hasn't seen EOL. Need to read more bytes from the channel * device. Side effect is to allocate another channel buffer. */ if (statePtr->flags & CHANNEL_BLOCKED) { if (statePtr->flags & CHANNEL_NONBLOCKING) { goto restore; } ResetFlag(statePtr, CHANNEL_BLOCKED); } if (GetInput(chanPtr) != 0) { goto restore; } bufPtr = statePtr->inQueueTail; } dst = (unsigned char *) RemovePoint(bufPtr); dstEnd = dst + BytesLeft(bufPtr); /* * Remember if EOF char is seen, then look for EOL anyhow, because the * EOL might be before the EOF char. * XXX - in the binary case, consider coincident search for eol/eof. */ if (inEofChar != '\0') { for (eol = dst; eol < dstEnd; eol++) { if (*eol == inEofChar) { dstEnd = eol; eof = eol; break; } } } /* * On EOL, leave current file position pointing after the EOL, but * don't store the EOL in the output string. */ for (eol = dst; eol < dstEnd; eol++) { if (*eol == eolChar) { skip = 1; goto gotEOL; } } if (eof != NULL) { /* * EOF character was seen. On EOF, leave current file position * pointing at the EOF character, but don't store the EOF * character in the output string. */ SetFlag(statePtr, CHANNEL_EOF | CHANNEL_STICKY_EOF); statePtr->inputEncodingFlags |= TCL_ENCODING_END; } if (statePtr->flags & CHANNEL_EOF) { skip = 0; eol = dstEnd; if ((dst == dstEnd) && (byteLen == oldLength)) { /* * If we didn't append any bytes before encountering EOF, * caller needs to see -1. */ byteArray = Tcl_SetByteArrayLength(objPtr, oldLength); CommonGetsCleanup(chanPtr); copiedTotal = -1; goto done; } goto gotEOL; } /* * Copy bytes from the channel buffer to the ByteArray. * This may realloc space, so keep track of result. */ rawLen = dstEnd - dst; byteArray = Tcl_SetByteArrayLength(objPtr, byteLen + rawLen); memcpy(byteArray + byteLen, dst, (size_t) rawLen); byteLen += rawLen; } /* * Found EOL or EOF, but the output buffer may now contain too many bytes. * We need to know how many bytes correspond to the number we want, so we * can remove the correct number of bytes from the channel buffer. */ gotEOL: if (bufPtr == NULL) { Tcl_Panic("TclGetsObjBinary: gotEOL reached with bufPtr==NULL"); } rawLen = eol - dst; byteArray = Tcl_SetByteArrayLength(objPtr, byteLen + rawLen); memcpy(byteArray + byteLen, dst, (size_t) rawLen); byteLen += rawLen; bufPtr->nextRemoved += rawLen + skip; /* * Convert the buffer if there was an encoding. * XXX - unimplemented. */ if (statePtr->encoding != NULL) { } /* * Recycle all the emptied buffers. */ CommonGetsCleanup(chanPtr); ResetFlag(statePtr, CHANNEL_BLOCKED); copiedTotal = byteLen; goto done; /* * Couldn't get a complete line. This only happens if we get a error * reading from the channel or we are non-blocking and there wasn't an EOL * or EOF in the data available. */ restore: bufPtr = statePtr->inQueueHead; if (bufPtr == NULL) { Tcl_Panic("TclGetsObjBinary: restore reached with bufPtr==NULL"); } bufPtr->nextRemoved = oldRemoved; for (bufPtr = bufPtr->nextPtr; bufPtr != NULL; bufPtr = bufPtr->nextPtr) { bufPtr->nextRemoved = BUFFER_PADDING; } CommonGetsCleanup(chanPtr); statePtr->inputEncodingFlags = oldFlags; byteArray = Tcl_SetByteArrayLength(objPtr, oldLength); /* * We didn't get a complete line so we need to indicate to UpdateInterest * that the gets blocked. It will wait for more data instead of firing a * timer, avoiding a busy wait. This is where we are assuming that the * next operation is a gets. No more file events will be delivered on this * channel until new data arrives or some operation is performed on the * channel (e.g. gets, read, fconfigure) that changes the blocking state. * Note that this means a file event will not be delivered even though a * read would be able to consume the buffered data. */ SetFlag(statePtr, CHANNEL_NEED_MORE_DATA); copiedTotal = -1; /* * Update the notifier state so we don't block while there is still data * in the buffers. */ done: UpdateInterest(chanPtr); return copiedTotal; } /* *--------------------------------------------------------------------------- * * FreeBinaryEncoding -- * * Frees any "iso8859-1" Tcl_Encoding created by [gets] on a binary * channel in a thread as part of that thread's finalization. * * Results: * None. * *--------------------------------------------------------------------------- */ static void FreeBinaryEncoding( ClientData dummy) /* Not used */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if (tsdPtr->binaryEncoding != NULL) { Tcl_FreeEncoding(tsdPtr->binaryEncoding); tsdPtr->binaryEncoding = NULL; } } /* *--------------------------------------------------------------------------- * * FilterInputBytes -- * * Helper function for Tcl_GetsObj. Produces UTF-8 characters from raw * bytes read from the channel. * * Consumes available bytes from channel buffers. When channel buffers * are exhausted, reads more bytes from channel device into a new channel * buffer. It is the caller's responsibility to free the channel buffers * that have been exhausted. * * Results: * The return value is -1 if there was an error reading from the channel, * 0 otherwise. * * Side effects: * Status object keeps track of how much data from channel buffers has * been consumed and where UTF-8 bytes should be stored. * *--------------------------------------------------------------------------- */ static int FilterInputBytes( Channel *chanPtr, /* Channel to read. */ GetsState *gsPtr) /* Current state of gets operation. */ { ChannelState *statePtr = chanPtr->state; /* State info for channel */ ChannelBuffer *bufPtr; char *raw, *rawStart, *dst; int offset, toRead, dstNeeded, spaceLeft, result, rawLen; Tcl_Obj *objPtr; #define ENCODING_LINESIZE 20 /* Lower bound on how many bytes to convert at * a time. Since we don't know a priori how * many bytes of storage this many source * bytes will use, we actually need at least * ENCODING_LINESIZE * TCL_MAX_UTF bytes of * room. */ objPtr = gsPtr->objPtr; /* * Subtract the number of bytes that were removed from channel buffer * during last call. */ bufPtr = gsPtr->bufPtr; if (bufPtr != NULL) { bufPtr->nextRemoved += gsPtr->rawRead; if (!IsBufferReady(bufPtr)) { bufPtr = bufPtr->nextPtr; } } gsPtr->totalChars += gsPtr->charsWrote; if ((bufPtr == NULL) || (bufPtr->nextAdded == BUFFER_PADDING)) { /* * All channel buffers were exhausted and the caller still hasn't seen * EOL. Need to read more bytes from the channel device. Side effect * is to allocate another channel buffer. */ read: if (statePtr->flags & CHANNEL_BLOCKED) { if (statePtr->flags & CHANNEL_NONBLOCKING) { gsPtr->charsWrote = 0; gsPtr->rawRead = 0; return -1; } ResetFlag(statePtr, CHANNEL_BLOCKED); } if (GetInput(chanPtr) != 0) { gsPtr->charsWrote = 0; gsPtr->rawRead = 0; return -1; } bufPtr = statePtr->inQueueTail; gsPtr->bufPtr = bufPtr; } /* * Convert some of the bytes from the channel buffer to UTF-8. Space in * objPtr's string rep is used to hold the UTF-8 characters. Grow the * string rep if we need more space. */ rawStart = RemovePoint(bufPtr); raw = rawStart; rawLen = BytesLeft(bufPtr); dst = *gsPtr->dstPtr; offset = dst - objPtr->bytes; toRead = ENCODING_LINESIZE; if (toRead > rawLen) { toRead = rawLen; } dstNeeded = toRead * TCL_UTF_MAX; spaceLeft = objPtr->length - offset; if (dstNeeded > spaceLeft) { int length = offset + ((offset < dstNeeded) ? dstNeeded : offset); if (Tcl_AttemptSetObjLength(objPtr, length) == 0) { length = offset + dstNeeded; if (Tcl_AttemptSetObjLength(objPtr, length) == 0) { dstNeeded = TCL_UTF_MAX - 1 + toRead; length = offset + dstNeeded; Tcl_SetObjLength(objPtr, length); } } spaceLeft = length - offset; dst = objPtr->bytes + offset; *gsPtr->dstPtr = dst; } gsPtr->state = statePtr->inputEncodingState; result = Tcl_ExternalToUtf(NULL, gsPtr->encoding, raw, rawLen, statePtr->inputEncodingFlags, &statePtr->inputEncodingState, dst, spaceLeft+1, &gsPtr->rawRead, &gsPtr->bytesWrote, &gsPtr->charsWrote); /* * Make sure that if we go through 'gets', that we reset the * TCL_ENCODING_START flag still. [Bug #523988] */ statePtr->inputEncodingFlags &= ~TCL_ENCODING_START; if (result == TCL_CONVERT_MULTIBYTE) { /* * The last few bytes in this channel buffer were the start of a * multibyte sequence. If this buffer was full, then move them to the * next buffer so the bytes will be contiguous. */ ChannelBuffer *nextPtr; int extra; nextPtr = bufPtr->nextPtr; if (!IsBufferFull(bufPtr)) { if (gsPtr->rawRead > 0) { /* * Some raw bytes were converted to UTF-8. Fall through, * returning those UTF-8 characters because a EOL might be * present in them. */ } else if (statePtr->flags & CHANNEL_EOF) { /* * There was a partial character followed by EOF on the * device. Fall through, returning that nothing was found. */ bufPtr->nextRemoved = bufPtr->nextAdded; } else { /* * There are no more cached raw bytes left. See if we can get * some more. */ goto read; } } else { if (nextPtr == NULL) { nextPtr = AllocChannelBuffer(statePtr->bufSize); bufPtr->nextPtr = nextPtr; statePtr->inQueueTail = nextPtr; } extra = rawLen - gsPtr->rawRead; memcpy(nextPtr->buf + BUFFER_PADDING - extra, raw + gsPtr->rawRead, (size_t) extra); nextPtr->nextRemoved -= extra; bufPtr->nextAdded -= extra; } } gsPtr->bufPtr = bufPtr; return 0; } /* *--------------------------------------------------------------------------- * * PeekAhead -- * * Helper function used by Tcl_GetsObj(). Called when we've seen a \r at * the end of the UTF-8 string and want to look ahead one character to * see if it is a \n. * * Results: * *gsPtr->dstPtr is filled with a pointer to the start of the range of * UTF-8 characters that were found by peeking and *dstEndPtr is filled * with a pointer to the bytes just after the end of the range. * * Side effects: * If no more raw bytes were available in one of the channel buffers, * tries to perform a non-blocking read to get more bytes from the * channel device. * *--------------------------------------------------------------------------- */ static void PeekAhead( Channel *chanPtr, /* The channel to read. */ char **dstEndPtr, /* Filled with pointer to end of new range of * UTF-8 characters. */ GetsState *gsPtr) /* Current state of gets operation. */ { ChannelState *statePtr = chanPtr->state; /* State info for channel */ ChannelBuffer *bufPtr; Tcl_DriverBlockModeProc *blockModeProc; int bytesLeft; bufPtr = gsPtr->bufPtr; /* * If there's any more raw input that's still buffered, we'll peek into * that. Otherwise, only get more data from the channel driver if it looks * like there might actually be more data. The assumption is that if the * channel buffer is filled right up to the end, then there might be more * data to read. */ blockModeProc = NULL; if (bufPtr->nextPtr == NULL) { bytesLeft = BytesLeft(bufPtr) - gsPtr->rawRead; if (bytesLeft == 0) { if (!IsBufferFull(bufPtr)) { /* * Don't peek ahead if last read was short read. */ goto cleanup; } if ((statePtr->flags & CHANNEL_NONBLOCKING) == 0) { blockModeProc = Tcl_ChannelBlockModeProc(chanPtr->typePtr); if (blockModeProc == NULL) { /* * Don't peek ahead if cannot set non-blocking mode. */ goto cleanup; } StackSetBlockMode(chanPtr, TCL_MODE_NONBLOCKING); } } } if (FilterInputBytes(chanPtr, gsPtr) == 0) { *dstEndPtr = *gsPtr->dstPtr + gsPtr->bytesWrote; } if (blockModeProc != NULL) { StackSetBlockMode(chanPtr, TCL_MODE_BLOCKING); } return; cleanup: bufPtr->nextRemoved += gsPtr->rawRead; gsPtr->rawRead = 0; gsPtr->totalChars += gsPtr->charsWrote; gsPtr->bytesWrote = 0; gsPtr->charsWrote = 0; } /* *--------------------------------------------------------------------------- * * CommonGetsCleanup -- * * Helper function for Tcl_GetsObj() to restore the channel after a * "gets" operation. * * Results: * None. * * Side effects: * Encoding may be freed. * *--------------------------------------------------------------------------- */ static void CommonGetsCleanup( Channel *chanPtr) { ChannelState *statePtr = chanPtr->state; /* State info for channel */ ChannelBuffer *bufPtr, *nextPtr; bufPtr = statePtr->inQueueHead; for ( ; bufPtr != NULL; bufPtr = nextPtr) { nextPtr = bufPtr->nextPtr; if (IsBufferReady(bufPtr)) { break; } RecycleBuffer(statePtr, bufPtr, 0); } statePtr->inQueueHead = bufPtr; if (bufPtr == NULL) { statePtr->inQueueTail = NULL; } else { /* * If any multi-byte characters were split across channel buffer * boundaries, the split-up bytes were moved to the next channel * buffer by FilterInputBytes(). Move the bytes back to their original * buffer because the caller could change the channel's encoding which * could change the interpretation of whether those bytes really made * up multi-byte characters after all. */ nextPtr = bufPtr->nextPtr; for ( ; nextPtr != NULL; nextPtr = bufPtr->nextPtr) { int extra; extra = SpaceLeft(bufPtr); if (extra > 0) { memcpy(InsertPoint(bufPtr), nextPtr->buf + BUFFER_PADDING - extra, (size_t) extra); bufPtr->nextAdded += extra; nextPtr->nextRemoved = BUFFER_PADDING; } bufPtr = nextPtr; } } } /* *---------------------------------------------------------------------- * * Tcl_Read -- * * Reads a given number of bytes from a channel. EOL and EOF translation * is done on the bytes being read, so the number of bytes consumed from * the channel may not be equal to the number of bytes stored in the * destination buffer. * * No encoding conversions are applied to the bytes being read. * * Results: * The number of bytes read, or -1 on error. Use Tcl_GetErrno() to * retrieve the error code for the error that occurred. * * Side effects: * May cause input to be buffered. * *---------------------------------------------------------------------- */ int Tcl_Read( Tcl_Channel chan, /* The channel from which to read. */ char *dst, /* Where to store input read. */ int bytesToRead) /* Maximum number of bytes to read. */ { Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* State info for channel */ /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; if (CheckChannelErrors(statePtr, TCL_READABLE) != 0) { return -1; } return DoRead(chanPtr, dst, bytesToRead); } /* *---------------------------------------------------------------------- * * Tcl_ReadRaw -- * * Reads a given number of bytes from a channel. EOL and EOF translation * is done on the bytes being read, so the number of bytes consumed from * the channel may not be equal to the number of bytes stored in the * destination buffer. * * No encoding conversions are applied to the bytes being read. * * Results: * The number of bytes read, or -1 on error. Use Tcl_GetErrno() to * retrieve the error code for the error that occurred. * * Side effects: * May cause input to be buffered. * *---------------------------------------------------------------------- */ int Tcl_ReadRaw( Tcl_Channel chan, /* The channel from which to read. */ char *bufPtr, /* Where to store input read. */ int bytesToRead) /* Maximum number of bytes to read. */ { Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* State info for channel */ int nread, result, copied, copiedNow; /* * The check below does too much because it will reject a call to this * function with a channel which is part of an 'fcopy'. But we have to * allow this here or else the chaining in the transformation drivers will * fail with 'file busy' error instead of retrieving and transforming the * data to copy. * * We let the check procedure now believe that there is no fcopy in * progress. A better solution than this might be an additional flag * argument to switch off specific checks. */ if (CheckChannelErrors(statePtr, TCL_READABLE | CHANNEL_RAW_MODE) != 0) { return -1; } /* * Check for information in the push-back buffers. If there is some, use * it. Go to the driver only if there is none (anymore) and the caller * requests more bytes. */ for (copied = 0; copied < bytesToRead; copied += copiedNow) { copiedNow = CopyBuffer(chanPtr, bufPtr + copied, bytesToRead - copied); if (copiedNow == 0) { if (statePtr->flags & CHANNEL_EOF) { goto done; } if (statePtr->flags & CHANNEL_BLOCKED) { if (statePtr->flags & CHANNEL_NONBLOCKING) { goto done; } ResetFlag(statePtr, CHANNEL_BLOCKED); } #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING /* * [Bug 943274]. Better emulation of non-blocking channels for * channels without BlockModeProc, by keeping track of true * fileevents generated by the OS == Data waiting and reading if * and only if we are sure to have data. */ if ((statePtr->flags & CHANNEL_NONBLOCKING) && (Tcl_ChannelBlockModeProc(chanPtr->typePtr) == NULL) && !(statePtr->flags & CHANNEL_HAS_MORE_DATA)) { /* * We bypass the driver; it would block as no data is * available. */ nread = -1; result = EWOULDBLOCK; } else { #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ /* * Now go to the driver to get as much as is possible to fill * the remaining request. Do all the error handling by * ourselves. The code was stolen from 'GetInput' and slightly * adapted (different return value here). * * The case of 'bytesToRead == 0' at this point cannot happen. */ nread = (chanPtr->typePtr->inputProc)(chanPtr->instanceData, bufPtr + copied, bytesToRead - copied, &result); #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING } #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ if (nread > 0) { /* * If we get a short read, signal up that we may be BLOCKED. * We should avoid calling the driver because on some * platforms we will block in the low level reading code even * though the channel is set into nonblocking mode. */ if (nread < (bytesToRead - copied)) { SetFlag(statePtr, CHANNEL_BLOCKED); } #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING if (nread <= (bytesToRead - copied)) { /* * [Bug 943274] We have read the available data, clear * flag. */ ResetFlag(statePtr, CHANNEL_HAS_MORE_DATA); } #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ } else if (nread == 0) { SetFlag(statePtr, CHANNEL_EOF); statePtr->inputEncodingFlags |= TCL_ENCODING_END; } else if (nread < 0) { if ((result == EWOULDBLOCK) || (result == EAGAIN)) { if (copied > 0) { /* * Information that was copied earlier has precedence * over EAGAIN/WOULDBLOCK handling. */ return copied; } SetFlag(statePtr, CHANNEL_BLOCKED); result = EAGAIN; } Tcl_SetErrno(result); return -1; } return copied + nread; } } done: return copied; } /* *--------------------------------------------------------------------------- * * Tcl_ReadChars -- * * Reads from the channel until the requested number of characters have * been seen, EOF is seen, or the channel would block. EOL and EOF * translation is done. If reading binary data, the raw bytes are wrapped * in a Tcl byte array object. Otherwise, the raw bytes are converted to * UTF-8 using the channel's current encoding and stored in a Tcl string * object. * * Results: * The number of characters read, or -1 on error. Use Tcl_GetErrno() to * retrieve the error code for the error that occurred. * * Side effects: * May cause input to be buffered. * *--------------------------------------------------------------------------- */ int Tcl_ReadChars( Tcl_Channel chan, /* The channel to read. */ Tcl_Obj *objPtr, /* Input data is stored in this object. */ int toRead, /* Maximum number of characters to store, or * -1 to read all available data (up to EOF or * when channel blocks). */ int appendFlag) /* If non-zero, data read from the channel * will be appended to the object. Otherwise, * the data will replace the existing contents * of the object. */ { Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* State info for channel */ /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; if (CheckChannelErrors(statePtr, TCL_READABLE) != 0) { /* * Update the notifier state so we don't block while there is still * data in the buffers. */ UpdateInterest(chanPtr); return -1; } return DoReadChars(chanPtr, objPtr, toRead, appendFlag); } /* *--------------------------------------------------------------------------- * * DoReadChars -- * * Reads from the channel until the requested number of characters have * been seen, EOF is seen, or the channel would block. EOL and EOF * translation is done. If reading binary data, the raw bytes are wrapped * in a Tcl byte array object. Otherwise, the raw bytes are converted to * UTF-8 using the channel's current encoding and stored in a Tcl string * object. * * Results: * The number of characters read, or -1 on error. Use Tcl_GetErrno() to * retrieve the error code for the error that occurred. * * Side effects: * May cause input to be buffered. * *--------------------------------------------------------------------------- */ static int DoReadChars( Channel *chanPtr, /* The channel to read. */ Tcl_Obj *objPtr, /* Input data is stored in this object. */ int toRead, /* Maximum number of characters to store, or * -1 to read all available data (up to EOF or * when channel blocks). */ int appendFlag) /* If non-zero, data read from the channel * will be appended to the object. Otherwise, * the data will replace the existing contents * of the object. */ { ChannelState *statePtr = chanPtr->state; /* State info for channel */ ChannelBuffer *bufPtr; int offset, factor, copied, copiedNow, result; Tcl_Encoding encoding; #define UTF_EXPANSION_FACTOR 1024 /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; encoding = statePtr->encoding; factor = UTF_EXPANSION_FACTOR; if (appendFlag == 0) { if (encoding == NULL) { Tcl_SetByteArrayLength(objPtr, 0); } else { Tcl_SetObjLength(objPtr, 0); /* * We're going to access objPtr->bytes directly, so we must ensure * that this is actually a string object (otherwise it might have * been pure Unicode). */ TclGetString(objPtr); } offset = 0; } else { if (encoding == NULL) { Tcl_GetByteArrayFromObj(objPtr, &offset); } else { TclGetStringFromObj(objPtr, &offset); } } for (copied = 0; (unsigned) toRead > 0; ) { copiedNow = -1; if (statePtr->inQueueHead != NULL) { if (encoding == NULL) { copiedNow = ReadBytes(statePtr, objPtr, toRead, &offset); } else { copiedNow = ReadChars(statePtr, objPtr, toRead, &offset, &factor); } /* * If the current buffer is empty recycle it. */ bufPtr = statePtr->inQueueHead; if (IsBufferEmpty(bufPtr)) { ChannelBuffer *nextPtr; nextPtr = bufPtr->nextPtr; RecycleBuffer(statePtr, bufPtr, 0); statePtr->inQueueHead = nextPtr; if (nextPtr == NULL) { statePtr->inQueueTail = NULL; } } } if (copiedNow < 0) { if (statePtr->flags & CHANNEL_EOF) { break; } if (statePtr->flags & CHANNEL_BLOCKED) { if (statePtr->flags & CHANNEL_NONBLOCKING) { break; } ResetFlag(statePtr, CHANNEL_BLOCKED); } result = GetInput(chanPtr); if (result != 0) { if (result == EAGAIN) { break; } copied = -1; goto done; } } else { copied += copiedNow; toRead -= copiedNow; } } ResetFlag(statePtr, CHANNEL_BLOCKED); if (encoding == NULL) { Tcl_SetByteArrayLength(objPtr, offset); } else { Tcl_SetObjLength(objPtr, offset); } /* * Update the notifier state so we don't block while there is still data * in the buffers. */ done: UpdateInterest(chanPtr); return copied; } /* *--------------------------------------------------------------------------- * * ReadBytes -- * * Reads from the channel until the requested number of bytes have been * seen, EOF is seen, or the channel would block. Bytes from the channel * are stored in objPtr as a ByteArray object. EOL and EOF translation * are done. * * 'bytesToRead' can safely be a very large number because space is only * allocated to hold data read from the channel as needed. * * Results: * The return value is the number of bytes appended to the object and * *offsetPtr is filled with the total number of bytes in the object * (greater than the return value if there were already bytes in the * object). * * Side effects: * None. * *--------------------------------------------------------------------------- */ static int ReadBytes( ChannelState *statePtr, /* State of the channel to read. */ Tcl_Obj *objPtr, /* Input data is appended to this ByteArray * object. Its length is how much space has * been allocated to hold data, not how many * bytes of data have been stored in the * object. */ int bytesToRead, /* Maximum number of bytes to store, or < 0 to * get all available bytes. Bytes are obtained * from the first buffer in the queue - even * if this number is larger than the number of * bytes available in the first buffer, only * the bytes from the first buffer are * returned. */ int *offsetPtr) /* On input, contains how many bytes of objPtr * have been used to hold data. On output, * filled with how many bytes are now being * used. */ { int toRead, srcLen, offset, length, srcRead, dstWrote; ChannelBuffer *bufPtr; char *src, *dst; offset = *offsetPtr; bufPtr = statePtr->inQueueHead; src = RemovePoint(bufPtr); srcLen = BytesLeft(bufPtr); toRead = bytesToRead; if ((unsigned) toRead > (unsigned) srcLen) { toRead = srcLen; } dst = (char *) Tcl_GetByteArrayFromObj(objPtr, &length); if (toRead > length - offset - 1) { /* * Double the existing size of the object or make enough room to hold * all the characters we may get from the source buffer, whichever is * larger. */ length = offset * 2; if (offset < toRead) { length = offset + toRead + 1; } dst = (char *) Tcl_SetByteArrayLength(objPtr, length); } dst += offset; if (statePtr->flags & INPUT_NEED_NL) { ResetFlag(statePtr, INPUT_NEED_NL); if ((srcLen == 0) || (*src != '\n')) { *dst = '\r'; *offsetPtr += 1; return 1; } *dst++ = '\n'; src++; srcLen--; toRead--; } srcRead = srcLen; dstWrote = toRead; if (TranslateInputEOL(statePtr, dst, src, &dstWrote, &srcRead) != 0) { if (dstWrote == 0) { return -1; } } bufPtr->nextRemoved += srcRead; *offsetPtr += dstWrote; return dstWrote; } /* *--------------------------------------------------------------------------- * * ReadChars -- * * Reads from the channel until the requested number of UTF-8 characters * have been seen, EOF is seen, or the channel would block. Raw bytes * from the channel are converted to UTF-8 and stored in objPtr. EOL and * EOF translation is done. * * 'charsToRead' can safely be a very large number because space is only * allocated to hold data read from the channel as needed. * * 'charsToRead' may *not* be 0. * * Results: * The return value is the number of characters appended to the object, * *offsetPtr is filled with the number of bytes that were appended, and * *factorPtr is filled with the expansion factor used to guess how many * bytes of UTF-8 to allocate to hold N source bytes. * * Side effects: * None. * *--------------------------------------------------------------------------- */ static int ReadChars( ChannelState *statePtr, /* State of channel to read. */ Tcl_Obj *objPtr, /* Input data is appended to this object. * objPtr->length is how much space has been * allocated to hold data, not how many bytes * of data have been stored in the object. */ int charsToRead, /* Maximum number of characters to store, or * -1 to get all available characters. * Characters are obtained from the first * buffer in the queue -- even if this number * is larger than the number of characters * available in the first buffer, only the * characters from the first buffer are * returned. */ int *offsetPtr, /* On input, contains how many bytes of objPtr * have been used to hold data. On output, * filled with how many bytes are now being * used. */ int *factorPtr) /* On input, contains a guess of how many * bytes need to be allocated to hold the * result of converting N source bytes to * UTF-8. On output, contains another guess * based on the data seen so far. */ { int toRead, factor, offset, spaceLeft, srcLen, dstNeeded; int srcRead, dstWrote, numChars, dstRead; ChannelBuffer *bufPtr; char *src, *dst; Tcl_EncodingState oldState; int encEndFlagSuppressed = 0; factor = *factorPtr; offset = *offsetPtr; bufPtr = statePtr->inQueueHead; src = RemovePoint(bufPtr); srcLen = BytesLeft(bufPtr); toRead = charsToRead; if ((unsigned)toRead > (unsigned)srcLen) { toRead = srcLen; } /* * 'factor' is how much we guess that the bytes in the source buffer will * expand when converted to UTF-8 chars. This guess comes from analyzing * how many characters were produced by the previous pass. */ dstNeeded = TCL_UTF_MAX - 1 + toRead * factor / UTF_EXPANSION_FACTOR; spaceLeft = objPtr->length - offset; if (dstNeeded > spaceLeft) { /* * Double the existing size of the object or make enough room to hold * all the characters we want from the source buffer, whichever is * larger. */ int length = offset + ((offset < dstNeeded) ? dstNeeded : offset); if (Tcl_AttemptSetObjLength(objPtr, length) == 0) { length = offset + dstNeeded; if (Tcl_AttemptSetObjLength(objPtr, length) == 0) { dstNeeded = TCL_UTF_MAX - 1 + toRead; length = offset + dstNeeded; Tcl_SetObjLength(objPtr, length); } } spaceLeft = length - offset; } if (toRead == srcLen) { /* * Want to convert the whole buffer in one pass. If we have enough * space, convert it using all available space in object rather than * using the factor. */ dstNeeded = spaceLeft; } dst = objPtr->bytes + offset; /* * [Bug 1462248]: The cause of the crash reported in this bug is this: * * - ReadChars, called with a single buffer, with a incomplete * multi-byte character at the end (only the first byte of it). * - Encoding translation fails, asks for more data * - Data is read, and eof is reached, TCL_ENCODING_END (TEE) is set. * - ReadChar is called again, converts the first buffer, but due to TEE * it does not check for incomplete multi-byte data, and the character * just after the end of the first buffer is a valid completion of the * multi-byte header in the actual buffer. The conversion reads more * characters from the buffer then present. This causes nextRemoved to * overshoot nextAdded and the next reads compute a negative srcLen, * cause further translations to fail, causing copying of data into the * next buffer using bad arguments, causing the mecpy for to eventually * fail. * * In the end it is a memory access bug spiraling out of control if the * conditions are _just so_. And ultimate cause is that TEE is given to a * conversion where it should not. TEE signals that this is the last * buffer. Except in our case it is not. * * My solution is to suppress TEE if the first buffer is not the last. We * will eventually need it given that EOF has been reached, but not right * now. This is what the new flag "endEncSuppressFlag" is for. * * The bug in 'Tcl_Utf2UtfProc' where it read from memory behind the * actual buffer has been fixed as well, and fixes the problem with the * crash too, but this would still allow the generic layer to * accidentially break a multi-byte sequence if the conditions are just * right, because again the ExternalToUtf would be successful where it * should not. */ if ((statePtr->inputEncodingFlags & TCL_ENCODING_END) && (bufPtr->nextPtr != NULL)) { /* * TEE is set for a buffer which is not the last. Squash it for now, * and restore it later, before yielding control to our caller. */ statePtr->inputEncodingFlags &= ~TCL_ENCODING_END; encEndFlagSuppressed = 1; } oldState = statePtr->inputEncodingState; if (statePtr->flags & INPUT_NEED_NL) { /* * We want a '\n' because the last character we saw was '\r'. */ ResetFlag(statePtr, INPUT_NEED_NL); Tcl_ExternalToUtf(NULL, statePtr->encoding, src, srcLen, statePtr->inputEncodingFlags, &statePtr->inputEncodingState, dst, TCL_UTF_MAX + 1, &srcRead, &dstWrote, &numChars); if ((dstWrote > 0) && (*dst == '\n')) { /* * The next char was a '\n'. Consume it and produce a '\n'. */ bufPtr->nextRemoved += srcRead; } else { /* * The next char was not a '\n'. Produce a '\r'. */ *dst = '\r'; } statePtr->inputEncodingFlags &= ~TCL_ENCODING_START; *offsetPtr += 1; if (encEndFlagSuppressed) { statePtr->inputEncodingFlags |= TCL_ENCODING_END; } return 1; } Tcl_ExternalToUtf(NULL, statePtr->encoding, src, srcLen, statePtr->inputEncodingFlags, &statePtr->inputEncodingState, dst, dstNeeded + 1, &srcRead, &dstWrote, &numChars); if (encEndFlagSuppressed) { statePtr->inputEncodingFlags |= TCL_ENCODING_END; } if (srcRead == 0) { /* * Not enough bytes in src buffer to make a complete char. Copy the * bytes to the next buffer to make a new contiguous string, then tell * the caller to fill the buffer with more bytes. */ ChannelBuffer *nextPtr; nextPtr = bufPtr->nextPtr; if (nextPtr == NULL) { if (srcLen > 0) { /* * There isn't enough data in the buffers to complete the next * character, so we need to wait for more data before the next * file event can be delivered. [Bug 478856] * * The exception to this is if the input buffer was completely * empty before we tried to convert its contents. Nothing in, * nothing out, and no incomplete character data. The * conversion before the current one was complete. */ SetFlag(statePtr, CHANNEL_NEED_MORE_DATA); } return -1; } /* * Space is made at the beginning of the buffer to copy the previous * unused bytes there. Check first if the buffer we are using actually * has enough space at its beginning for the data we are copying. * Because if not we will write over the buffer management * information, especially the 'nextPtr'. * * Note that the BUFFER_PADDING (See AllocChannelBuffer) is used to * prevent exactly this situation. I.e. it should never happen. * Therefore it is ok to panic should it happen despite the * precautions. */ if (nextPtr->nextRemoved - srcLen < 0) { Tcl_Panic("Buffer Underflow, BUFFER_PADDING not enough"); } nextPtr->nextRemoved -= srcLen; memcpy(RemovePoint(nextPtr), src, (size_t) srcLen); RecycleBuffer(statePtr, bufPtr, 0); statePtr->inQueueHead = nextPtr; return ReadChars(statePtr, objPtr, charsToRead, offsetPtr, factorPtr); } dstRead = dstWrote; if (TranslateInputEOL(statePtr, dst, dst, &dstWrote, &dstRead) != 0) { /* * Hit EOF char. How many bytes of src correspond to where the EOF was * located in dst? Run the conversion again with an output buffer just * big enough to hold the data so we can get the correct value for * srcRead. */ if (dstWrote == 0) { return -1; } statePtr->inputEncodingState = oldState; Tcl_ExternalToUtf(NULL, statePtr->encoding, src, srcLen, statePtr->inputEncodingFlags, &statePtr->inputEncodingState, dst, dstRead + TCL_UTF_MAX, &srcRead, &dstWrote, &numChars); TranslateInputEOL(statePtr, dst, dst, &dstWrote, &dstRead); } /* * The number of characters that we got may be less than the number that * we started with because "\r\n" sequences may have been turned into just * '\n' in dst. */ numChars -= (dstRead - dstWrote); if ((unsigned) numChars > (unsigned) toRead) { /* * Got too many chars. */ const char *eof; eof = Tcl_UtfAtIndex(dst, toRead); statePtr->inputEncodingState = oldState; Tcl_ExternalToUtf(NULL, statePtr->encoding, src, srcLen, statePtr->inputEncodingFlags, &statePtr->inputEncodingState, dst, eof - dst + TCL_UTF_MAX, &srcRead, &dstWrote, &numChars); dstRead = dstWrote; TranslateInputEOL(statePtr, dst, dst, &dstWrote, &dstRead); numChars -= (dstRead - dstWrote); } statePtr->inputEncodingFlags &= ~TCL_ENCODING_START; bufPtr->nextRemoved += srcRead; if (dstWrote > srcRead + 1) { *factorPtr = dstWrote * UTF_EXPANSION_FACTOR / srcRead; } *offsetPtr += dstWrote; return numChars; } /* *--------------------------------------------------------------------------- * * TranslateInputEOL -- * * Perform input EOL and EOF translation on the source buffer, leaving * the translated result in the destination buffer. * * Results: * The return value is 1 if the EOF character was found when copying * bytes to the destination buffer, 0 otherwise. * * Side effects: * None. * *--------------------------------------------------------------------------- */ static int TranslateInputEOL( ChannelState *statePtr, /* Channel being read, for EOL translation and * EOF character. */ char *dstStart, /* Output buffer filled with chars by applying * appropriate EOL translation to source * characters. */ const char *srcStart, /* Source characters. */ int *dstLenPtr, /* On entry, the maximum length of output * buffer in bytes; must be <= *srcLenPtr. On * exit, the number of bytes actually used in * output buffer. */ int *srcLenPtr) /* On entry, the length of source buffer. On * exit, the number of bytes read from the * source buffer. */ { int dstLen, srcLen, inEofChar; const char *eof; dstLen = *dstLenPtr; eof = NULL; inEofChar = statePtr->inEofChar; if (inEofChar != '\0') { /* * Find EOF in translated buffer then compress out the EOL. The source * buffer may be much longer than the destination buffer - we only * want to return EOF if the EOF has been copied to the destination * buffer. */ const char *src, *srcMax; srcMax = srcStart + *srcLenPtr; for (src = srcStart; src < srcMax; src++) { if (*src == inEofChar) { eof = src; srcLen = src - srcStart; if (srcLen < dstLen) { dstLen = srcLen; } *srcLenPtr = srcLen; break; } } } switch (statePtr->inputTranslation) { case TCL_TRANSLATE_LF: if (dstStart != srcStart) { memcpy(dstStart, srcStart, (size_t) dstLen); } srcLen = dstLen; break; case TCL_TRANSLATE_CR: { char *dst, *dstEnd; if (dstStart != srcStart) { memcpy(dstStart, srcStart, (size_t) dstLen); } dstEnd = dstStart + dstLen; for (dst = dstStart; dst < dstEnd; dst++) { if (*dst == '\r') { *dst = '\n'; } } srcLen = dstLen; break; } case TCL_TRANSLATE_CRLF: { char *dst; const char *src, *srcEnd, *srcMax; dst = dstStart; src = srcStart; srcEnd = srcStart + dstLen; srcMax = srcStart + *srcLenPtr; for ( ; src < srcEnd; ) { if (*src == '\r') { src++; if (src >= srcMax) { SetFlag(statePtr, INPUT_NEED_NL); } else if (*src == '\n') { *dst++ = *src++; } else { *dst++ = '\r'; } } else { *dst++ = *src++; } } srcLen = src - srcStart; dstLen = dst - dstStart; break; } case TCL_TRANSLATE_AUTO: { char *dst; const char *src, *srcEnd, *srcMax; dst = dstStart; src = srcStart; srcEnd = srcStart + dstLen; srcMax = srcStart + *srcLenPtr; if ((statePtr->flags & INPUT_SAW_CR) && (src < srcMax)) { if (*src == '\n') { src++; } ResetFlag(statePtr, INPUT_SAW_CR); } for ( ; src < srcEnd; ) { if (*src == '\r') { src++; if (src >= srcMax) { SetFlag(statePtr, INPUT_SAW_CR); } else if (*src == '\n') { if (srcEnd < srcMax) { srcEnd++; } src++; } *dst++ = '\n'; } else { *dst++ = *src++; } } srcLen = src - srcStart; dstLen = dst - dstStart; break; } default: return 0; } *dstLenPtr = dstLen; if ((eof != NULL) && (srcStart + srcLen >= eof)) { /* * EOF character was seen in EOL translated range. Leave current file * position pointing at the EOF character, but don't store the EOF * character in the output string. */ SetFlag(statePtr, CHANNEL_EOF | CHANNEL_STICKY_EOF); statePtr->inputEncodingFlags |= TCL_ENCODING_END; ResetFlag(statePtr, INPUT_SAW_CR | INPUT_NEED_NL); return 1; } *srcLenPtr = srcLen; return 0; } /* *---------------------------------------------------------------------- * * Tcl_Ungets -- * * Causes the supplied string to be added to the input queue of the * channel, at either the head or tail of the queue. * * Results: * The number of bytes stored in the channel, or -1 on error. * * Side effects: * Adds input to the input queue of a channel. * *---------------------------------------------------------------------- */ int Tcl_Ungets( Tcl_Channel chan, /* The channel for which to add the input. */ const char *str, /* The input itself. */ int len, /* The length of the input. */ int atEnd) /* If non-zero, add at end of queue; otherwise * add at head of queue. */ { Channel *chanPtr; /* The real IO channel. */ ChannelState *statePtr; /* State of actual channel. */ ChannelBuffer *bufPtr; /* Buffer to contain the data. */ int flags; chanPtr = (Channel *) chan; statePtr = chanPtr->state; /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; /* * CheckChannelErrors clears too many flag bits in this one case. */ flags = statePtr->flags; if (CheckChannelErrors(statePtr, TCL_READABLE) != 0) { len = -1; goto done; } statePtr->flags = flags; /* * If we have encountered a sticky EOF, just punt without storing (sticky * EOF is set if we have seen the input eofChar, to prevent reading beyond * the eofChar). Otherwise, clear the EOF flags, and clear the BLOCKED * bit. We want to discover these conditions anew in each operation. */ if (statePtr->flags & CHANNEL_STICKY_EOF) { goto done; } ResetFlag(statePtr, CHANNEL_BLOCKED | CHANNEL_EOF); bufPtr = AllocChannelBuffer(len); memcpy(InsertPoint(bufPtr), str, (size_t) len); bufPtr->nextAdded += len; if (statePtr->inQueueHead == NULL) { bufPtr->nextPtr = NULL; statePtr->inQueueHead = bufPtr; statePtr->inQueueTail = bufPtr; } else if (atEnd) { bufPtr->nextPtr = NULL; statePtr->inQueueTail->nextPtr = bufPtr; statePtr->inQueueTail = bufPtr; } else { bufPtr->nextPtr = statePtr->inQueueHead; statePtr->inQueueHead = bufPtr; } /* * Update the notifier state so we don't block while there is still data * in the buffers. */ done: UpdateInterest(chanPtr); return len; } /* *---------------------------------------------------------------------- * * Tcl_Flush -- * * Flushes output data on a channel. * * Results: * A standard Tcl result. * * Side effects: * May flush output queued on this channel. * *---------------------------------------------------------------------- */ int Tcl_Flush( Tcl_Channel chan) /* The Channel to flush. */ { int result; /* Of calling FlushChannel. */ Channel *chanPtr = (Channel *) chan; /* The actual channel. */ ChannelState *statePtr = chanPtr->state; /* State of actual channel. */ /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; if (CheckChannelErrors(statePtr, TCL_WRITABLE) != 0) { return -1; } /* * Force current output buffer to be output also. */ if ((statePtr->curOutPtr != NULL) && IsBufferReady(statePtr->curOutPtr)) { SetFlag(statePtr, BUFFER_READY); } result = FlushChannel(NULL, chanPtr, 0); if (result != 0) { return TCL_ERROR; } return TCL_OK; } /* *---------------------------------------------------------------------- * * DiscardInputQueued -- * * Discards any input read from the channel but not yet consumed by Tcl * reading commands. * * Results: * None. * * Side effects: * May discard input from the channel. If discardLastBuffer is zero, * leaves one buffer in place for back-filling. * *---------------------------------------------------------------------- */ static void DiscardInputQueued( ChannelState *statePtr, /* Channel on which to discard the queued * input. */ int discardSavedBuffers) /* If non-zero, discard all buffers including * last one. */ { ChannelBuffer *bufPtr, *nxtPtr; /* Loop variables. */ bufPtr = statePtr->inQueueHead; statePtr->inQueueHead = NULL; statePtr->inQueueTail = NULL; for (; bufPtr != NULL; bufPtr = nxtPtr) { nxtPtr = bufPtr->nextPtr; RecycleBuffer(statePtr, bufPtr, discardSavedBuffers); } /* * If discardSavedBuffers is nonzero, must also discard any previously * saved buffer in the saveInBufPtr field. */ if (discardSavedBuffers && statePtr->saveInBufPtr != NULL) { ckfree((char *) statePtr->saveInBufPtr); statePtr->saveInBufPtr = NULL; } } /* *--------------------------------------------------------------------------- * * GetInput -- * * Reads input data from a device into a channel buffer. * * Results: * The return value is the Posix error code if an error occurred while * reading from the file, or 0 otherwise. * * Side effects: * Reads from the underlying device. * *--------------------------------------------------------------------------- */ static int GetInput( Channel *chanPtr) /* Channel to read input from. */ { int toRead; /* How much to read? */ int result; /* Of calling driver. */ int nread; /* How much was read from channel? */ ChannelBuffer *bufPtr; /* New buffer to add to input queue. */ ChannelState *statePtr = chanPtr->state; /* State info for channel */ /* * Prevent reading from a dead channel -- a channel that has been closed * but not yet deallocated, which can happen if the exit handler for * channel cleanup has run but the channel is still registered in some * interpreter. */ if (CheckForDeadChannel(NULL, statePtr)) { return EINVAL; } /* * First check for more buffers in the pushback area of the topmost * channel in the stack and use them. They can be the result of a * transformation which went away without reading all the information * placed in the area when it was stacked. * * Two possibilities for the state: No buffers in it, or a single empty * buffer. In the latter case we can recycle it now. */ if (chanPtr->inQueueHead != NULL) { if (statePtr->inQueueHead != NULL) { RecycleBuffer(statePtr, statePtr->inQueueHead, 0); statePtr->inQueueHead = NULL; } statePtr->inQueueHead = chanPtr->inQueueHead; statePtr->inQueueTail = chanPtr->inQueueTail; chanPtr->inQueueHead = NULL; chanPtr->inQueueTail = NULL; return 0; } /* * Nothing in the pushback area, fall back to the usual handling (driver, * etc.) */ /* * See if we can fill an existing buffer. If we can, read only as much as * will fit in it. Otherwise allocate a new buffer, add it to the input * queue and attempt to fill it to the max. */ bufPtr = statePtr->inQueueTail; if ((bufPtr != NULL) && !IsBufferFull(bufPtr)) { toRead = SpaceLeft(bufPtr); } else { bufPtr = statePtr->saveInBufPtr; statePtr->saveInBufPtr = NULL; /* * Check the actual buffersize against the requested buffersize. * Buffers which are smaller than requested are squashed. This is done * to honor dynamic changes of the buffersize made by the user. */ if ((bufPtr != NULL) && (bufPtr->bufLength - BUFFER_PADDING < statePtr->bufSize)) { ckfree((char *) bufPtr); bufPtr = NULL; } if (bufPtr == NULL) { bufPtr = AllocChannelBuffer(statePtr->bufSize); } bufPtr->nextPtr = NULL; /* * SF #427196: Use the actual size of the buffer to determine the * number of bytes to read from the channel and not the size for new * buffers. They can be different if the buffersize was changed * between reads. * * Note: This affects performance negatively if the buffersize was * extended but this small buffer is reused for all subsequent reads. * The system never uses buffers with the requested bigger size in * that case. An adjunct patch could try and delete all unused buffers * it encounters and which are smaller than the formally requested * buffersize. */ toRead = SpaceLeft(bufPtr); if (statePtr->inQueueTail == NULL) { statePtr->inQueueHead = bufPtr; } else { statePtr->inQueueTail->nextPtr = bufPtr; } statePtr->inQueueTail = bufPtr; } /* * If EOF is set, we should avoid calling the driver because on some * platforms it is impossible to read from a device after EOF. */ if (statePtr->flags & CHANNEL_EOF) { return 0; } #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING /* * [SF Tcl Bug 943274]. Better emulation of non-blocking channels for * channels without BlockModeProc, by keeping track of true fileevents * generated by the OS == Data waiting and reading if and only if we are * sure to have data. */ if ((statePtr->flags & CHANNEL_NONBLOCKING) && (Tcl_ChannelBlockModeProc(chanPtr->typePtr) == NULL) && !(statePtr->flags & CHANNEL_HAS_MORE_DATA)) { /* * Bypass the driver, it would block, as no data is available */ nread = -1; result = EWOULDBLOCK; } else { #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ nread = (chanPtr->typePtr->inputProc)(chanPtr->instanceData, InsertPoint(bufPtr), toRead, &result); #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING } #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ if (nread > 0) { bufPtr->nextAdded += nread; /* * If we get a short read, signal up that we may be BLOCKED. We should * avoid calling the driver because on some platforms we will block in * the low level reading code even though the channel is set into * nonblocking mode. */ if (nread < toRead) { SetFlag(statePtr, CHANNEL_BLOCKED); } #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING if (nread <= toRead) { /* * [SF Tcl Bug 943274] We have read the available data, clear * flag. */ ResetFlag(statePtr, CHANNEL_HAS_MORE_DATA); } #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ } else if (nread == 0) { SetFlag(statePtr, CHANNEL_EOF); statePtr->inputEncodingFlags |= TCL_ENCODING_END; } else if (nread < 0) { if ((result == EWOULDBLOCK) || (result == EAGAIN)) { SetFlag(statePtr, CHANNEL_BLOCKED); result = EAGAIN; } Tcl_SetErrno(result); return result; } return 0; } /* *---------------------------------------------------------------------- * * Tcl_Seek -- * * Implements seeking on Tcl Channels. This is a public function so that * other C facilities may be implemented on top of it. * * Results: * The new access point or -1 on error. If error, use Tcl_GetErrno() to * retrieve the POSIX error code for the error that occurred. * * Side effects: * May flush output on the channel. May discard queued input. * *---------------------------------------------------------------------- */ Tcl_WideInt Tcl_Seek( Tcl_Channel chan, /* The channel on which to seek. */ Tcl_WideInt offset, /* Offset to seek to. */ int mode) /* Relative to which location to seek? */ { Channel *chanPtr = (Channel *) chan; /* The real IO channel. */ ChannelState *statePtr = chanPtr->state; /* State info for channel */ int inputBuffered, outputBuffered; /* # bytes held in buffers. */ int result; /* Of device driver operations. */ Tcl_WideInt curPos; /* Position on the device. */ int wasAsync; /* Was the channel nonblocking before the seek * operation? If so, must restore to * non-blocking mode after the seek. */ if (CheckChannelErrors(statePtr, TCL_WRITABLE | TCL_READABLE) != 0) { return Tcl_LongAsWide(-1); } /* * Disallow seek on dead channels - channels that have been closed but not * yet been deallocated. Such channels can be found if the exit handler * for channel cleanup has run but the channel is still registered in an * interpreter. */ if (CheckForDeadChannel(NULL, statePtr)) { return Tcl_LongAsWide(-1); } /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; /* * Disallow seek on channels whose type does not have a seek procedure * defined. This means that the channel does not support seeking. */ if (chanPtr->typePtr->seekProc == NULL) { Tcl_SetErrno(EINVAL); return Tcl_LongAsWide(-1); } /* * Compute how much input and output is buffered. If both input and output * is buffered, cannot compute the current position. */ inputBuffered = Tcl_InputBuffered(chan); outputBuffered = Tcl_OutputBuffered(chan); if ((inputBuffered != 0) && (outputBuffered != 0)) { Tcl_SetErrno(EFAULT); return Tcl_LongAsWide(-1); } /* * If we are seeking relative to the current position, compute the * corrected offset taking into account the amount of unread input. */ if (mode == SEEK_CUR) { offset -= inputBuffered; } /* * Discard any queued input - this input should not be read after the * seek. */ DiscardInputQueued(statePtr, 0); /* * Reset EOF and BLOCKED flags. We invalidate them by moving the access * point. Also clear CR related flags. */ statePtr->flags &= ~(CHANNEL_EOF | CHANNEL_STICKY_EOF | CHANNEL_BLOCKED | INPUT_SAW_CR); /* * If the channel is in asynchronous output mode, switch it back to * synchronous mode and cancel any async flush that may be scheduled. * After the flush, the channel will be put back into asynchronous output * mode. */ wasAsync = 0; if (statePtr->flags & CHANNEL_NONBLOCKING) { wasAsync = 1; result = StackSetBlockMode(chanPtr, TCL_MODE_BLOCKING); if (result != 0) { return Tcl_LongAsWide(-1); } ResetFlag(statePtr, CHANNEL_NONBLOCKING); if (statePtr->flags & BG_FLUSH_SCHEDULED) { ResetFlag(statePtr, BG_FLUSH_SCHEDULED); } } /* * If there is data buffered in statePtr->curOutPtr then mark the channel * as ready to flush before invoking FlushChannel. */ if ((statePtr->curOutPtr != NULL) && IsBufferReady(statePtr->curOutPtr)) { SetFlag(statePtr, BUFFER_READY); } /* * If the flush fails we cannot recover the original position. In that * case the seek is not attempted because we do not know where the access * position is - instead we return the error. FlushChannel has already * called Tcl_SetErrno() to report the error upwards. If the flush * succeeds we do the seek also. */ if (FlushChannel(NULL, chanPtr, 0) != 0) { curPos = -1; } else { /* * Now seek to the new position in the channel as requested by the * caller. Note that we prefer the wideSeekProc if that is available * and non-NULL... */ if (HaveVersion(chanPtr->typePtr, TCL_CHANNEL_VERSION_3) && chanPtr->typePtr->wideSeekProc != NULL) { curPos = (chanPtr->typePtr->wideSeekProc) (chanPtr->instanceData, offset, mode, &result); } else if (offset < Tcl_LongAsWide(LONG_MIN) || offset > Tcl_LongAsWide(LONG_MAX)) { result = EOVERFLOW; curPos = Tcl_LongAsWide(-1); } else { curPos = Tcl_LongAsWide((chanPtr->typePtr->seekProc) ( chanPtr->instanceData, Tcl_WideAsLong(offset), mode, &result)); } if (curPos == Tcl_LongAsWide(-1)) { Tcl_SetErrno(result); } } /* * Restore to nonblocking mode if that was the previous behavior. * * NOTE: Even if there was an async flush active we do not restore it now * because we already flushed all the queued output, above. */ if (wasAsync) { SetFlag(statePtr, CHANNEL_NONBLOCKING); result = StackSetBlockMode(chanPtr, TCL_MODE_NONBLOCKING); if (result != 0) { return Tcl_LongAsWide(-1); } } return curPos; } /* *---------------------------------------------------------------------- * * Tcl_Tell -- * * Returns the position of the next character to be read/written on this * channel. * * Results: * A nonnegative integer on success, -1 on failure. If failed, use * Tcl_GetErrno() to retrieve the POSIX error code for the error that * occurred. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_WideInt Tcl_Tell( Tcl_Channel chan) /* The channel to return pos for. */ { Channel *chanPtr = (Channel *) chan; /* The real IO channel. */ ChannelState *statePtr = chanPtr->state; /* State info for channel */ int inputBuffered, outputBuffered; /* # bytes held in buffers. */ int result; /* Of calling device driver. */ Tcl_WideInt curPos; /* Position on device. */ if (CheckChannelErrors(statePtr, TCL_WRITABLE | TCL_READABLE) != 0) { return Tcl_LongAsWide(-1); } /* * Disallow tell on dead channels -- channels that have been closed but * not yet been deallocated. Such channels can be found if the exit * handler for channel cleanup has run but the channel is still registered * in an interpreter. */ if (CheckForDeadChannel(NULL, statePtr)) { return Tcl_LongAsWide(-1); } /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; /* * Disallow tell on channels whose type does not have a seek procedure * defined. This means that the channel does not support seeking. */ if (chanPtr->typePtr->seekProc == NULL) { Tcl_SetErrno(EINVAL); return Tcl_LongAsWide(-1); } /* * Compute how much input and output is buffered. If both input and output * is buffered, cannot compute the current position. */ inputBuffered = Tcl_InputBuffered(chan); outputBuffered = Tcl_OutputBuffered(chan); if ((inputBuffered != 0) && (outputBuffered != 0)) { Tcl_SetErrno(EFAULT); return Tcl_LongAsWide(-1); } /* * Get the current position in the device and compute the position where * the next character will be read or written. Note that we prefer the * wideSeekProc if that is available and non-NULL... */ if (HaveVersion(chanPtr->typePtr, TCL_CHANNEL_VERSION_3) && chanPtr->typePtr->wideSeekProc != NULL) { curPos = (chanPtr->typePtr->wideSeekProc) (chanPtr->instanceData, Tcl_LongAsWide(0), SEEK_CUR, &result); } else { curPos = Tcl_LongAsWide((chanPtr->typePtr->seekProc) ( chanPtr->instanceData, 0, SEEK_CUR, &result)); } if (curPos == Tcl_LongAsWide(-1)) { Tcl_SetErrno(result); return Tcl_LongAsWide(-1); } if (inputBuffered != 0) { return curPos - inputBuffered; } return curPos + outputBuffered; } /* *--------------------------------------------------------------------------- * * Tcl_SeekOld, Tcl_TellOld -- * * Backward-compatability versions of the seek/tell interface that do not * support 64-bit offsets. This interface is not documented or expected * to be supported indefinitely. * * Results: * As for Tcl_Seek and Tcl_Tell respectively, except truncated to * whatever value will fit in an 'int'. * * Side effects: * As for Tcl_Seek and Tcl_Tell respectively. * *--------------------------------------------------------------------------- */ int Tcl_SeekOld( Tcl_Channel chan, /* The channel on which to seek. */ int offset, /* Offset to seek to. */ int mode) /* Relative to which location to seek? */ { Tcl_WideInt wOffset, wResult; wOffset = Tcl_LongAsWide((long)offset); wResult = Tcl_Seek(chan, wOffset, mode); return (int)Tcl_WideAsLong(wResult); } int Tcl_TellOld( Tcl_Channel chan) /* The channel to return pos for. */ { Tcl_WideInt wResult; wResult = Tcl_Tell(chan); return (int)Tcl_WideAsLong(wResult); } /* *--------------------------------------------------------------------------- * * Tcl_TruncateChannel -- * * Truncate a channel to the given length. * * Results: * TCL_OK on success, TCL_ERROR if the operation failed (e.g. is not * supported by the type of channel, or the underlying OS operation * failed in some way). * * Side effects: * Seeks the channel to the current location. Sets errno on OS error. * *--------------------------------------------------------------------------- */ int Tcl_TruncateChannel( Tcl_Channel chan, /* Channel to truncate. */ Tcl_WideInt length) /* Length to truncate it to. */ { Channel *chanPtr = (Channel *) chan; Tcl_DriverTruncateProc *truncateProc = Tcl_ChannelTruncateProc(chanPtr->typePtr); int result; if (truncateProc == NULL) { /* * Feature not supported and it's not emulatable. Pretend it's * returned an EINVAL, a very generic error! */ Tcl_SetErrno(EINVAL); return TCL_ERROR; } if (!(chanPtr->state->flags & TCL_WRITABLE)) { /* * We require that the file was opened of writing. Do that check now * so that we only flush if we think we're going to succeed. */ Tcl_SetErrno(EINVAL); return TCL_ERROR; } /* * Seek first to force a total flush of all pending buffers and ditch any * pre-read input data. */ if (Tcl_Seek(chan, (Tcl_WideInt)0, SEEK_CUR) == Tcl_LongAsWide(-1)) { return TCL_ERROR; } /* * We're all flushed to disk now and we also don't have any unfortunate * input baggage around either; can truncate with impunity. */ result = truncateProc(chanPtr->instanceData, length); if (result != 0) { Tcl_SetErrno(result); return TCL_ERROR; } return TCL_OK; } /* *--------------------------------------------------------------------------- * * CheckChannelErrors -- * * See if the channel is in an ready state and can perform the desired * operation. * * Results: * The return value is 0 if the channel is OK, otherwise the return value * is -1 and errno is set to indicate the error. * * Side effects: * May clear the EOF and/or BLOCKED bits if reading from channel. * *--------------------------------------------------------------------------- */ static int CheckChannelErrors( ChannelState *statePtr, /* Channel to check. */ int flags) /* Test if channel supports desired operation: * TCL_READABLE, TCL_WRITABLE. Also indicates * Raw read or write for special close * processing */ { int direction = flags & (TCL_READABLE|TCL_WRITABLE); /* * Check for unreported error. */ if (statePtr->unreportedError != 0) { Tcl_SetErrno(statePtr->unreportedError); statePtr->unreportedError = 0; /* * TIP #219, Tcl Channel Reflection API. * Move a defered error message back into the channel bypass. */ if (statePtr->chanMsg != NULL) { TclDecrRefCount(statePtr->chanMsg); } statePtr->chanMsg = statePtr->unreportedMsg; statePtr->unreportedMsg = NULL; return -1; } /* * Only the raw read and write operations are allowed during close in * order to drain data from stacked channels. */ if ((statePtr->flags & CHANNEL_CLOSED) && ((flags & CHANNEL_RAW_MODE) == 0)) { Tcl_SetErrno(EACCES); return -1; } /* * Fail if the channel is not opened for desired operation. */ if ((statePtr->flags & direction) == 0) { Tcl_SetErrno(EACCES); return -1; } /* * Fail if the channel is in the middle of a background copy. * * Don't do this tests for raw channels here or else the chaining in the * transformation drivers will fail with 'file busy' error instead of * retrieving and transforming the data to copy. */ if (BUSY_STATE(statePtr,flags) && ((flags & CHANNEL_RAW_MODE) == 0)) { Tcl_SetErrno(EBUSY); return -1; } if (direction == TCL_READABLE) { /* * If we have not encountered a sticky EOF, clear the EOF bit (sticky * EOF is set if we have seen the input eofChar, to prevent reading * beyond the eofChar). Also, always clear the BLOCKED bit. We want to * discover these conditions anew in each operation. */ if ((statePtr->flags & CHANNEL_STICKY_EOF) == 0) { ResetFlag(statePtr, CHANNEL_EOF); } ResetFlag(statePtr, CHANNEL_BLOCKED | CHANNEL_NEED_MORE_DATA); } return 0; } /* *---------------------------------------------------------------------- * * Tcl_Eof -- * * Returns 1 if the channel is at EOF, 0 otherwise. * * Results: * 1 or 0, always. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_Eof( Tcl_Channel chan) /* Does this channel have EOF? */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of real channel structure. */ return ((statePtr->flags & CHANNEL_STICKY_EOF) || ((statePtr->flags & CHANNEL_EOF) && (Tcl_InputBuffered(chan) == 0))) ? 1 : 0; } /* *---------------------------------------------------------------------- * * Tcl_InputBlocked -- * * Returns 1 if input is blocked on this channel, 0 otherwise. * * Results: * 0 or 1, always. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_InputBlocked( Tcl_Channel chan) /* Is this channel blocked? */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of real channel structure. */ return (statePtr->flags & CHANNEL_BLOCKED) ? 1 : 0; } /* *---------------------------------------------------------------------- * * Tcl_InputBuffered -- * * Returns the number of bytes of input currently buffered in the common * internal buffer of a channel. * * Results: * The number of input bytes buffered, or zero if the channel is not open * for reading. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_InputBuffered( Tcl_Channel chan) /* The channel to query. */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of real channel structure. */ ChannelBuffer *bufPtr; int bytesBuffered; for (bytesBuffered = 0, bufPtr = statePtr->inQueueHead; bufPtr != NULL; bufPtr = bufPtr->nextPtr) { bytesBuffered += BytesLeft(bufPtr); } /* * Don't forget the bytes in the topmost pushback area. */ for (bufPtr = statePtr->topChanPtr->inQueueHead; bufPtr != NULL; bufPtr = bufPtr->nextPtr) { bytesBuffered += BytesLeft(bufPtr); } return bytesBuffered; } /* *---------------------------------------------------------------------- * * Tcl_OutputBuffered -- * * Returns the number of bytes of output currently buffered in the common * internal buffer of a channel. * * Results: * The number of output bytes buffered, or zero if the channel is not open * for writing. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_OutputBuffered( Tcl_Channel chan) /* The channel to query. */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of real channel structure. */ ChannelBuffer *bufPtr; int bytesBuffered; for (bytesBuffered = 0, bufPtr = statePtr->outQueueHead; bufPtr != NULL; bufPtr = bufPtr->nextPtr) { bytesBuffered += BytesLeft(bufPtr); } if (statePtr->curOutPtr != NULL) { register ChannelBuffer *curOutPtr = statePtr->curOutPtr; if (IsBufferReady(curOutPtr)) { bytesBuffered += BytesLeft(curOutPtr); } } return bytesBuffered; } /* *---------------------------------------------------------------------- * * Tcl_ChannelBuffered -- * * Returns the number of bytes of input currently buffered in the * internal buffer (push back area) of a channel. * * Results: * The number of input bytes buffered, or zero if the channel is not open * for reading. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_ChannelBuffered( Tcl_Channel chan) /* The channel to query. */ { Channel *chanPtr = (Channel *) chan; /* Real channel structure. */ ChannelBuffer *bufPtr; int bytesBuffered = 0; for (bufPtr = chanPtr->inQueueHead; bufPtr != NULL; bufPtr = bufPtr->nextPtr) { bytesBuffered += BytesLeft(bufPtr); } return bytesBuffered; } /* *---------------------------------------------------------------------- * * Tcl_SetChannelBufferSize -- * * Sets the size of buffers to allocate to store input or output in the * channel. The size must be between 1 byte and 1 MByte. * * Results: * None. * * Side effects: * Sets the size of buffers subsequently allocated for this channel. * *---------------------------------------------------------------------- */ void Tcl_SetChannelBufferSize( Tcl_Channel chan, /* The channel whose buffer size to set. */ int sz) /* The size to set. */ { ChannelState *statePtr; /* State of real channel structure. */ /* * Clip the buffer size to force it into the [1,1M] range */ if (sz < 1) { sz = 1; } else if (sz > MAX_CHANNEL_BUFFER_SIZE) { sz = MAX_CHANNEL_BUFFER_SIZE; } statePtr = ((Channel *) chan)->state; statePtr->bufSize = sz; if (statePtr->outputStage != NULL) { ckfree((char *) statePtr->outputStage); statePtr->outputStage = NULL; } if ((statePtr->encoding != NULL) && (statePtr->flags & TCL_WRITABLE)) { statePtr->outputStage = (char *) ckalloc((unsigned) (statePtr->bufSize + 2)); } } /* *---------------------------------------------------------------------- * * Tcl_GetChannelBufferSize -- * * Retrieves the size of buffers to allocate for this channel. * * Results: * The size. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_GetChannelBufferSize( Tcl_Channel chan) /* The channel for which to find the buffer * size. */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of real channel structure. */ return statePtr->bufSize; } /* *---------------------------------------------------------------------- * * Tcl_BadChannelOption -- * * This procedure generates a "bad option" error message in an (optional) * interpreter. It is used by channel drivers when a invalid Set/Get * option is requested. Its purpose is to concatenate the generic options * list to the specific ones and factorize the generic options error * message string. * * Results: * TCL_ERROR. * * Side effects: * An error message is generated in interp's result object to indicate * that a command was invoked with the a bad option. The message has the * form: * bad option "blah": should be one of * <...generic options...>+<...specific options...> * "blah" is the optionName argument and "" is a space * separated list of specific option words. The function takes good care * of inserting minus signs before each option, commas after, and an "or" * before the last option. * *---------------------------------------------------------------------- */ int Tcl_BadChannelOption( Tcl_Interp *interp, /* Current interpreter (can be NULL).*/ const char *optionName, /* 'bad option' name */ const char *optionList) /* Specific options list to append to the * standard generic options. Can be NULL for * generic options only. */ { if (interp != NULL) { const char *genericopt = "blocking buffering buffersize encoding eofchar translation"; const char **argv; int argc, i; Tcl_DString ds; Tcl_DStringInit(&ds); Tcl_DStringAppend(&ds, genericopt, -1); if (optionList && (*optionList)) { Tcl_DStringAppend(&ds, " ", 1); Tcl_DStringAppend(&ds, optionList, -1); } if (Tcl_SplitList(interp, Tcl_DStringValue(&ds), &argc, &argv) != TCL_OK) { Tcl_Panic("malformed option list in channel driver"); } Tcl_ResetResult(interp); Tcl_AppendResult(interp, "bad option \"", optionName, "\": should be one of ", NULL); argc--; for (i = 0; i < argc; i++) { Tcl_AppendResult(interp, "-", argv[i], ", ", NULL); } Tcl_AppendResult(interp, "or -", argv[i], NULL); Tcl_DStringFree(&ds); ckfree((char *) argv); } Tcl_SetErrno(EINVAL); return TCL_ERROR; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelOption -- * * Gets a mode associated with an IO channel. If the optionName arg is * non NULL, retrieves the value of that option. If the optionName arg is * NULL, retrieves a list of alternating option names and values for the * given channel. * * Results: * A standard Tcl result. Also sets the supplied DString to the string * value of the option(s) returned. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_GetChannelOption( Tcl_Interp *interp, /* For error reporting - can be NULL. */ Tcl_Channel chan, /* Channel on which to get option. */ const char *optionName, /* Option to get. */ Tcl_DString *dsPtr) /* Where to store value(s). */ { size_t len; /* Length of optionName string. */ char optionVal[128]; /* Buffer for sprintf. */ Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* State info for channel */ int flags; /* * Disallow options on dead channels -- channels that have been closed but * not yet been deallocated. Such channels can be found if the exit * handler for channel cleanup has run but the channel is still registered * in an interpreter. */ if (CheckForDeadChannel(interp, statePtr)) { return TCL_ERROR; } /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; /* * If we are in the middle of a background copy, use the saved flags. */ if (statePtr->csPtrR) { flags = statePtr->csPtrR->readFlags; } else if (statePtr->csPtrW) { flags = statePtr->csPtrW->writeFlags; } else { flags = statePtr->flags; } /* * If the optionName is NULL it means that we want a list of all options * and values. */ if (optionName == NULL) { len = 0; } else { len = strlen(optionName); } if (len == 0 || HaveOpt(2, "-blocking")) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-blocking"); } Tcl_DStringAppendElement(dsPtr, (flags & CHANNEL_NONBLOCKING) ? "0" : "1"); if (len > 0) { return TCL_OK; } } if (len == 0 || HaveOpt(7, "-buffering")) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-buffering"); } if (flags & CHANNEL_LINEBUFFERED) { Tcl_DStringAppendElement(dsPtr, "line"); } else if (flags & CHANNEL_UNBUFFERED) { Tcl_DStringAppendElement(dsPtr, "none"); } else { Tcl_DStringAppendElement(dsPtr, "full"); } if (len > 0) { return TCL_OK; } } if (len == 0 || HaveOpt(7, "-buffersize")) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-buffersize"); } TclFormatInt(optionVal, statePtr->bufSize); Tcl_DStringAppendElement(dsPtr, optionVal); if (len > 0) { return TCL_OK; } } if (len == 0 || HaveOpt(2, "-encoding")) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-encoding"); } if (statePtr->encoding == NULL) { Tcl_DStringAppendElement(dsPtr, "binary"); } else { Tcl_DStringAppendElement(dsPtr, Tcl_GetEncodingName(statePtr->encoding)); } if (len > 0) { return TCL_OK; } } if (len == 0 || HaveOpt(2, "-eofchar")) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-eofchar"); } if (((flags & (TCL_READABLE|TCL_WRITABLE)) == (TCL_READABLE|TCL_WRITABLE)) && (len == 0)) { Tcl_DStringStartSublist(dsPtr); } if (flags & TCL_READABLE) { if (statePtr->inEofChar == 0) { Tcl_DStringAppendElement(dsPtr, ""); } else { char buf[4]; sprintf(buf, "%c", statePtr->inEofChar); Tcl_DStringAppendElement(dsPtr, buf); } } if (flags & TCL_WRITABLE) { if (statePtr->outEofChar == 0) { Tcl_DStringAppendElement(dsPtr, ""); } else { char buf[4]; sprintf(buf, "%c", statePtr->outEofChar); Tcl_DStringAppendElement(dsPtr, buf); } } if (!(flags & (TCL_READABLE|TCL_WRITABLE))) { /* * Not readable or writable (e.g. server socket) */ Tcl_DStringAppendElement(dsPtr, ""); } if (((flags & (TCL_READABLE|TCL_WRITABLE)) == (TCL_READABLE|TCL_WRITABLE)) && (len == 0)) { Tcl_DStringEndSublist(dsPtr); } if (len > 0) { return TCL_OK; } } if (len == 0 || HaveOpt(1, "-translation")) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-translation"); } if (((flags & (TCL_READABLE|TCL_WRITABLE)) == (TCL_READABLE|TCL_WRITABLE)) && (len == 0)) { Tcl_DStringStartSublist(dsPtr); } if (flags & TCL_READABLE) { if (statePtr->inputTranslation == TCL_TRANSLATE_AUTO) { Tcl_DStringAppendElement(dsPtr, "auto"); } else if (statePtr->inputTranslation == TCL_TRANSLATE_CR) { Tcl_DStringAppendElement(dsPtr, "cr"); } else if (statePtr->inputTranslation == TCL_TRANSLATE_CRLF) { Tcl_DStringAppendElement(dsPtr, "crlf"); } else { Tcl_DStringAppendElement(dsPtr, "lf"); } } if (flags & TCL_WRITABLE) { if (statePtr->outputTranslation == TCL_TRANSLATE_AUTO) { Tcl_DStringAppendElement(dsPtr, "auto"); } else if (statePtr->outputTranslation == TCL_TRANSLATE_CR) { Tcl_DStringAppendElement(dsPtr, "cr"); } else if (statePtr->outputTranslation == TCL_TRANSLATE_CRLF) { Tcl_DStringAppendElement(dsPtr, "crlf"); } else { Tcl_DStringAppendElement(dsPtr, "lf"); } } if (!(flags & (TCL_READABLE|TCL_WRITABLE))) { /* * Not readable or writable (e.g. server socket) */ Tcl_DStringAppendElement(dsPtr, "auto"); } if (((flags & (TCL_READABLE|TCL_WRITABLE)) == (TCL_READABLE|TCL_WRITABLE)) && (len == 0)) { Tcl_DStringEndSublist(dsPtr); } if (len > 0) { return TCL_OK; } } if (chanPtr->typePtr->getOptionProc != NULL) { /* * Let the driver specific handle additional options and result code * and message. */ return (chanPtr->typePtr->getOptionProc) (chanPtr->instanceData, interp, optionName, dsPtr); } else { /* * No driver specific options case. */ if (len == 0) { return TCL_OK; } return Tcl_BadChannelOption(interp, optionName, NULL); } } /* *--------------------------------------------------------------------------- * * Tcl_SetChannelOption -- * * Sets an option on a channel. * * Results: * A standard Tcl result. On error, sets interp's result object if * interp is not NULL. * * Side effects: * May modify an option on a device. * *--------------------------------------------------------------------------- */ int Tcl_SetChannelOption( Tcl_Interp *interp, /* For error reporting - can be NULL. */ Tcl_Channel chan, /* Channel on which to set mode. */ const char *optionName, /* Which option to set? */ const char *newValue) /* New value for option. */ { Channel *chanPtr = (Channel *) chan; /* The real IO channel. */ ChannelState *statePtr = chanPtr->state; /* State info for channel */ size_t len; /* Length of optionName string. */ int argc; const char **argv; /* * If the channel is in the middle of a background copy, fail. */ if (statePtr->csPtrR || statePtr->csPtrW) { if (interp) { Tcl_AppendResult(interp, "unable to set channel options: " "background copy in progress", NULL); } return TCL_ERROR; } /* * Disallow options on dead channels -- channels that have been closed but * not yet been deallocated. Such channels can be found if the exit * handler for channel cleanup has run but the channel is still registered * in an interpreter. */ if (CheckForDeadChannel(NULL, statePtr)) { return TCL_ERROR; } /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; len = strlen(optionName); if (HaveOpt(2, "-blocking")) { int newMode; if (Tcl_GetBoolean(interp, newValue, &newMode) == TCL_ERROR) { return TCL_ERROR; } if (newMode) { newMode = TCL_MODE_BLOCKING; } else { newMode = TCL_MODE_NONBLOCKING; } return SetBlockMode(interp, chanPtr, newMode); } else if (HaveOpt(7, "-buffering")) { len = strlen(newValue); if ((newValue[0] == 'f') && (strncmp(newValue, "full", len) == 0)) { statePtr->flags &= ~(CHANNEL_UNBUFFERED|CHANNEL_LINEBUFFERED); } else if ((newValue[0] == 'l') && (strncmp(newValue, "line", len) == 0)) { ResetFlag(statePtr, CHANNEL_UNBUFFERED); SetFlag(statePtr, CHANNEL_LINEBUFFERED); } else if ((newValue[0] == 'n') && (strncmp(newValue, "none", len) == 0)) { ResetFlag(statePtr, CHANNEL_LINEBUFFERED); SetFlag(statePtr, CHANNEL_UNBUFFERED); } else { if (interp) { Tcl_AppendResult(interp, "bad value for -buffering: " "must be one of full, line, or none", NULL); return TCL_ERROR; } } return TCL_OK; } else if (HaveOpt(7, "-buffersize")) { int newBufferSize; if (Tcl_GetInt(interp, newValue, &newBufferSize) == TCL_ERROR) { return TCL_ERROR; } Tcl_SetChannelBufferSize(chan, newBufferSize); } else if (HaveOpt(2, "-encoding")) { Tcl_Encoding encoding; if ((newValue[0] == '\0') || (strcmp(newValue, "binary") == 0)) { encoding = NULL; } else { encoding = Tcl_GetEncoding(interp, newValue); if (encoding == NULL) { return TCL_ERROR; } } /* * When the channel has an escape sequence driven encoding such as * iso2022, the terminated escape sequence must write to the buffer. */ if ((statePtr->encoding != NULL) && (statePtr->curOutPtr != NULL) && (CheckChannelErrors(statePtr, TCL_WRITABLE) == 0)) { statePtr->outputEncodingFlags |= TCL_ENCODING_END; WriteChars(chanPtr, "", 0); } Tcl_FreeEncoding(statePtr->encoding); statePtr->encoding = encoding; statePtr->inputEncodingState = NULL; statePtr->inputEncodingFlags = TCL_ENCODING_START; statePtr->outputEncodingState = NULL; statePtr->outputEncodingFlags = TCL_ENCODING_START; ResetFlag(statePtr, CHANNEL_NEED_MORE_DATA); UpdateInterest(chanPtr); } else if (HaveOpt(2, "-eofchar")) { if (Tcl_SplitList(interp, newValue, &argc, &argv) == TCL_ERROR) { return TCL_ERROR; } if (argc == 0) { statePtr->inEofChar = 0; statePtr->outEofChar = 0; } else if (argc == 1 || argc == 2) { int outIndex = (argc - 1); int inValue = (int) argv[0][0]; int outValue = (int) argv[outIndex][0]; if (inValue & 0x80 || outValue & 0x80) { if (interp) { Tcl_AppendResult(interp, "bad value for -eofchar: ", "must be non-NUL ASCII character", NULL); } ckfree((char *) argv); return TCL_ERROR; } if (statePtr->flags & TCL_READABLE) { statePtr->inEofChar = inValue; } if (statePtr->flags & TCL_WRITABLE) { statePtr->outEofChar = outValue; } } else { if (interp) { Tcl_AppendResult(interp, "bad value for -eofchar: should be a list of zero," " one, or two elements", NULL); } ckfree((char *) argv); return TCL_ERROR; } if (argv != NULL) { ckfree((char *) argv); } /* * [Bug 930851] Reset EOF and BLOCKED flags. Changing the character * which signals eof can transform a current eof condition into a 'go * ahead'. Ditto for blocked. */ statePtr->flags &= ~(CHANNEL_EOF | CHANNEL_STICKY_EOF | CHANNEL_BLOCKED); return TCL_OK; } else if (HaveOpt(1, "-translation")) { const char *readMode, *writeMode; if (Tcl_SplitList(interp, newValue, &argc, &argv) == TCL_ERROR) { return TCL_ERROR; } if (argc == 1) { readMode = (statePtr->flags & TCL_READABLE) ? argv[0] : NULL; writeMode = (statePtr->flags & TCL_WRITABLE) ? argv[0] : NULL; } else if (argc == 2) { readMode = (statePtr->flags & TCL_READABLE) ? argv[0] : NULL; writeMode = (statePtr->flags & TCL_WRITABLE) ? argv[1] : NULL; } else { if (interp) { Tcl_AppendResult(interp, "bad value for -translation: must be a one or two" " element list", NULL); } ckfree((char *) argv); return TCL_ERROR; } if (readMode) { TclEolTranslation translation; if (*readMode == '\0') { translation = statePtr->inputTranslation; } else if (strcmp(readMode, "auto") == 0) { translation = TCL_TRANSLATE_AUTO; } else if (strcmp(readMode, "binary") == 0) { translation = TCL_TRANSLATE_LF; statePtr->inEofChar = 0; Tcl_FreeEncoding(statePtr->encoding); statePtr->encoding = NULL; } else if (strcmp(readMode, "lf") == 0) { translation = TCL_TRANSLATE_LF; } else if (strcmp(readMode, "cr") == 0) { translation = TCL_TRANSLATE_CR; } else if (strcmp(readMode, "crlf") == 0) { translation = TCL_TRANSLATE_CRLF; } else if (strcmp(readMode, "platform") == 0) { translation = TCL_PLATFORM_TRANSLATION; } else { if (interp) { Tcl_AppendResult(interp, "bad value for -translation: " "must be one of auto, binary, cr, lf, crlf," " or platform", NULL); } ckfree((char *) argv); return TCL_ERROR; } /* * Reset the EOL flags since we need to look at any buffered data * to see if the new translation mode allows us to complete the * line. */ if (translation != statePtr->inputTranslation) { statePtr->inputTranslation = translation; ResetFlag(statePtr, INPUT_SAW_CR | CHANNEL_NEED_MORE_DATA); UpdateInterest(chanPtr); } } if (writeMode) { if (*writeMode == '\0') { /* Do nothing. */ } else if (strcmp(writeMode, "auto") == 0) { /* * This is a hack to get TCP sockets to produce output in CRLF * mode if they are being set into AUTO mode. A better * solution for achieving this effect will be coded later. */ if (strcmp(Tcl_ChannelName(chanPtr->typePtr), "tcp") == 0) { statePtr->outputTranslation = TCL_TRANSLATE_CRLF; } else { statePtr->outputTranslation = TCL_PLATFORM_TRANSLATION; } } else if (strcmp(writeMode, "binary") == 0) { statePtr->outEofChar = 0; statePtr->outputTranslation = TCL_TRANSLATE_LF; Tcl_FreeEncoding(statePtr->encoding); statePtr->encoding = NULL; } else if (strcmp(writeMode, "lf") == 0) { statePtr->outputTranslation = TCL_TRANSLATE_LF; } else if (strcmp(writeMode, "cr") == 0) { statePtr->outputTranslation = TCL_TRANSLATE_CR; } else if (strcmp(writeMode, "crlf") == 0) { statePtr->outputTranslation = TCL_TRANSLATE_CRLF; } else if (strcmp(writeMode, "platform") == 0) { statePtr->outputTranslation = TCL_PLATFORM_TRANSLATION; } else { if (interp) { Tcl_AppendResult(interp, "bad value for -translation: " "must be one of auto, binary, cr, lf, crlf," " or platform", NULL); } ckfree((char *) argv); return TCL_ERROR; } } ckfree((char *) argv); return TCL_OK; } else if (chanPtr->typePtr->setOptionProc != NULL) { return (*chanPtr->typePtr->setOptionProc)(chanPtr->instanceData, interp, optionName, newValue); } else { return Tcl_BadChannelOption(interp, optionName, NULL); } /* * If bufsize changes, need to get rid of old utility buffer. */ if (statePtr->saveInBufPtr != NULL) { RecycleBuffer(statePtr, statePtr->saveInBufPtr, 1); statePtr->saveInBufPtr = NULL; } if ((statePtr->inQueueHead != NULL) && (statePtr->inQueueHead->nextPtr == NULL) && IsBufferEmpty(statePtr->inQueueHead)) { RecycleBuffer(statePtr, statePtr->inQueueHead, 1); statePtr->inQueueHead = NULL; statePtr->inQueueTail = NULL; } /* * If encoding or bufsize changes, need to update output staging buffer. */ if (statePtr->outputStage != NULL) { ckfree(statePtr->outputStage); statePtr->outputStage = NULL; } if ((statePtr->encoding != NULL) && (statePtr->flags & TCL_WRITABLE)) { statePtr->outputStage = ckalloc((unsigned) (statePtr->bufSize + 2)); } return TCL_OK; } /* *---------------------------------------------------------------------- * * CleanupChannelHandlers -- * * Removes channel handlers that refer to the supplied interpreter, so * that if the actual channel is not closed now, these handlers will not * run on subsequent events on the channel. This would be erroneous, * because the interpreter no longer has a reference to this channel. * * Results: * None. * * Side effects: * Removes channel handlers. * *---------------------------------------------------------------------- */ static void CleanupChannelHandlers( Tcl_Interp *interp, Channel *chanPtr) { ChannelState *statePtr = chanPtr->state; /* State info for channel */ EventScriptRecord *sPtr, *prevPtr, *nextPtr; /* * Remove fileevent records on this channel that refer to the given * interpreter. */ for (sPtr = statePtr->scriptRecordPtr, prevPtr = NULL; sPtr != NULL; sPtr = nextPtr) { nextPtr = sPtr->nextPtr; if (sPtr->interp == interp) { if (prevPtr == NULL) { statePtr->scriptRecordPtr = nextPtr; } else { prevPtr->nextPtr = nextPtr; } Tcl_DeleteChannelHandler((Tcl_Channel) chanPtr, TclChannelEventScriptInvoker, sPtr); TclDecrRefCount(sPtr->scriptPtr); ckfree((char *) sPtr); } else { prevPtr = sPtr; } } } /* *---------------------------------------------------------------------- * * Tcl_NotifyChannel -- * * This procedure is called by a channel driver when a driver detects an * event on a channel. This procedure is responsible for actually * handling the event by invoking any channel handler callbacks. * * Results: * None. * * Side effects: * Whatever the channel handler callback procedure does. * *---------------------------------------------------------------------- */ void Tcl_NotifyChannel( Tcl_Channel channel, /* Channel that detected an event. */ int mask) /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, or TCL_EXCEPTION: indicates * which events were detected. */ { Channel *chanPtr = (Channel *) channel; ChannelState *statePtr = chanPtr->state; /* State info for channel */ ChannelHandler *chPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); NextChannelHandler nh; Channel *upChanPtr; const Tcl_ChannelType *upTypePtr; #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING /* * [SF Tcl Bug 943274] For a non-blocking channel without blockmodeproc we * keep track of actual input coming from the OS so that we can do a * credible imitation of non-blocking behaviour. */ if ((mask & TCL_READABLE) && (statePtr->flags & CHANNEL_NONBLOCKING) && (Tcl_ChannelBlockModeProc(chanPtr->typePtr) == NULL) && !(statePtr->flags & CHANNEL_TIMER_FEV)) { SetFlag(statePtr, CHANNEL_HAS_MORE_DATA); } #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ /* * In contrast to the other API functions this procedure walks towards the * top of a stack and not down from it. * * The channel calling this procedure is the one who generated the event, * and thus does not take part in handling it. IOW, its HandlerProc is not * called, instead we begin with the channel above it. * * This behaviour also allows the transformation channels to generate * their own events and pass them upward. */ while (mask && (chanPtr->upChanPtr != (NULL))) { Tcl_DriverHandlerProc *upHandlerProc; upChanPtr = chanPtr->upChanPtr; upTypePtr = upChanPtr->typePtr; upHandlerProc = Tcl_ChannelHandlerProc(upTypePtr); if (upHandlerProc != NULL) { mask = (*upHandlerProc) (upChanPtr->instanceData, mask); } /* * ELSE: Ignore transformations which are unable to handle the event * coming from below. Assume that they don't change the mask and pass * it on. */ chanPtr = upChanPtr; } channel = (Tcl_Channel) chanPtr; /* * Here we have either reached the top of the stack or the mask is empty. * We break out of the procedure if it is the latter. */ if (!mask) { return; } /* * We are now above the topmost channel in a stack and have events left. * Now call the channel handlers as usual. * * Preserve the channel struct in case the script closes it. */ Tcl_Preserve(channel); Tcl_Preserve(statePtr); /* * If we are flushing in the background, be sure to call FlushChannel for * writable events. Note that we have to discard the writable event so we * don't call any write handlers before the flush is complete. */ if ((statePtr->flags & BG_FLUSH_SCHEDULED) && (mask & TCL_WRITABLE)) { FlushChannel(NULL, chanPtr, 1); mask &= ~TCL_WRITABLE; } /* * Add this invocation to the list of recursive invocations of * ChannelHandlerEventProc. */ nh.nextHandlerPtr = NULL; nh.nestedHandlerPtr = tsdPtr->nestedHandlerPtr; tsdPtr->nestedHandlerPtr = &nh; for (chPtr = statePtr->chPtr; chPtr != NULL; ) { /* * If this channel handler is interested in any of the events that * have occurred on the channel, invoke its procedure. */ if ((chPtr->mask & mask) != 0) { nh.nextHandlerPtr = chPtr->nextPtr; (*(chPtr->proc))(chPtr->clientData, mask); chPtr = nh.nextHandlerPtr; } else { chPtr = chPtr->nextPtr; } } /* * Update the notifier interest, since it may have changed after invoking * event handlers. Skip that if the channel was deleted in the call to the * channel handler. */ if (chanPtr->typePtr != NULL) { UpdateInterest(chanPtr); } Tcl_Release(statePtr); Tcl_Release(channel); tsdPtr->nestedHandlerPtr = nh.nestedHandlerPtr; } /* *---------------------------------------------------------------------- * * UpdateInterest -- * * Arrange for the notifier to call us back at appropriate times based on * the current state of the channel. * * Results: * None. * * Side effects: * May schedule a timer or driver handler. * *---------------------------------------------------------------------- */ static void UpdateInterest( Channel *chanPtr) /* Channel to update. */ { ChannelState *statePtr = chanPtr->state; /* State info for channel */ int mask = statePtr->interestMask; /* * If there are flushed buffers waiting to be written, then we need to * watch for the channel to become writable. */ if (statePtr->flags & BG_FLUSH_SCHEDULED) { mask |= TCL_WRITABLE; } /* * If there is data in the input queue, and we aren't waiting for more * data, then we need to schedule a timer so we don't block in the * notifier. Also, cancel the read interest so we don't get duplicate * events. */ if (mask & TCL_READABLE) { if (!(statePtr->flags & CHANNEL_NEED_MORE_DATA) && (statePtr->inQueueHead != NULL) && IsBufferReady(statePtr->inQueueHead)) { mask &= ~TCL_READABLE; /* * Andreas Kupries, April 11, 2003 * * Some operating systems (Solaris 2.6 and higher (but not Solaris * 2.5, go figure)) generate READABLE and EXCEPTION events when * select()'ing [*] on a plain file, even if EOF was not yet * reached. This is a problem in the following situation: * * - An extension asks to get both READABLE and EXCEPTION events. * - It reads data into a buffer smaller than the buffer used by * Tcl itself. * - It does not process all events in the event queue, but only * one, at least in some situations. * * In that case we can get into a situation where * * - Tcl drops READABLE here, because it has data in its own * buffers waiting to be read by the extension. * - A READABLE event is syntesized via timer. * - The OS still reports the EXCEPTION condition on the file. * - And the extension gets the EXCPTION event first, and handles * this as EOF. * * End result ==> Premature end of reading from a file. * * The concrete example is 'Expect', and its [expect] command * (and at the C-level, deep in the bowels of Expect, * 'exp_get_next_event'. See marker 'SunOS' for commentary in * that function too). * * [*] As the Tcl notifier does. See also for marker 'SunOS' in * file 'exp_event.c' of Expect. * * Our solution here is to drop the interest in the EXCEPTION * events too. This compiles on all platforms, and also passes the * testsuite on all of them. */ mask &= ~TCL_EXCEPTION; if (!statePtr->timer) { statePtr->timer = Tcl_CreateTimerHandler(0, ChannelTimerProc, chanPtr); } } } (chanPtr->typePtr->watchProc)(chanPtr->instanceData, mask); } /* *---------------------------------------------------------------------- * * ChannelTimerProc -- * * Timer handler scheduled by UpdateInterest to monitor the channel * buffers until they are empty. * * Results: * None. * * Side effects: * May invoke channel handlers. * *---------------------------------------------------------------------- */ static void ChannelTimerProc( ClientData clientData) { Channel *chanPtr = clientData; ChannelState *statePtr = chanPtr->state; /* State info for channel */ if (!(statePtr->flags & CHANNEL_NEED_MORE_DATA) && (statePtr->interestMask & TCL_READABLE) && (statePtr->inQueueHead != NULL) && IsBufferReady(statePtr->inQueueHead)) { /* * Restart the timer in case a channel handler reenters the event loop * before UpdateInterest gets called by Tcl_NotifyChannel. */ statePtr->timer = Tcl_CreateTimerHandler(0, ChannelTimerProc,chanPtr); #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING /* * Set the TIMER flag to notify the higher levels that the driver * might have no data for us. We do this only if we are in * non-blocking mode and the driver has no BlockModeProc because only * then we really don't know if the driver will block or not. A * similar test is done in "PeekAhead". */ if ((statePtr->flags & CHANNEL_NONBLOCKING) && (Tcl_ChannelBlockModeProc(chanPtr->typePtr) == NULL)) { SetFlag(statePtr, CHANNEL_TIMER_FEV); } #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ Tcl_Preserve(statePtr); Tcl_NotifyChannel((Tcl_Channel)chanPtr, TCL_READABLE); #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING ResetFlag(statePtr, CHANNEL_TIMER_FEV); #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ Tcl_Release(statePtr); } else { statePtr->timer = NULL; UpdateInterest(chanPtr); } } /* *---------------------------------------------------------------------- * * Tcl_CreateChannelHandler -- * * Arrange for a given procedure to be invoked whenever the channel * indicated by the chanPtr arg becomes readable or writable. * * Results: * None. * * Side effects: * From now on, whenever the I/O channel given by chanPtr becomes ready * in the way indicated by mask, proc will be invoked. See the manual * entry for details on the calling sequence to proc. If there is already * an event handler for chan, proc and clientData, then the mask will be * updated. * *---------------------------------------------------------------------- */ void Tcl_CreateChannelHandler( Tcl_Channel chan, /* The channel to create the handler for. */ int mask, /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, and TCL_EXCEPTION: indicates * conditions under which proc should be * called. Use 0 to disable a registered * handler. */ Tcl_ChannelProc *proc, /* Procedure to call for each selected * event. */ ClientData clientData) /* Arbitrary data to pass to proc. */ { ChannelHandler *chPtr; Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* State info for channel */ /* * Check whether this channel handler is not already registered. If it is * not, create a new record, else reuse existing record (smash current * values). */ for (chPtr = statePtr->chPtr; chPtr != NULL; chPtr = chPtr->nextPtr) { if ((chPtr->chanPtr == chanPtr) && (chPtr->proc == proc) && (chPtr->clientData == clientData)) { break; } } if (chPtr == NULL) { chPtr = (ChannelHandler *) ckalloc(sizeof(ChannelHandler)); chPtr->mask = 0; chPtr->proc = proc; chPtr->clientData = clientData; chPtr->chanPtr = chanPtr; chPtr->nextPtr = statePtr->chPtr; statePtr->chPtr = chPtr; } /* * The remainder of the initialization below is done regardless of whether * or not this is a new record or a modification of an old one. */ chPtr->mask = mask; /* * Recompute the interest mask for the channel - this call may actually be * disabling an existing handler. */ statePtr->interestMask = 0; for (chPtr = statePtr->chPtr; chPtr != NULL; chPtr = chPtr->nextPtr) { statePtr->interestMask |= chPtr->mask; } UpdateInterest(statePtr->topChanPtr); } /* *---------------------------------------------------------------------- * * Tcl_DeleteChannelHandler -- * * Cancel a previously arranged callback arrangement for an IO channel. * * Results: * None. * * Side effects: * If a callback was previously registered for this chan, proc and * clientData, it is removed and the callback will no longer be called * when the channel becomes ready for IO. * *---------------------------------------------------------------------- */ void Tcl_DeleteChannelHandler( Tcl_Channel chan, /* The channel for which to remove the * callback. */ Tcl_ChannelProc *proc, /* The procedure in the callback to delete. */ ClientData clientData) /* The client data in the callback to * delete. */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); ChannelHandler *chPtr, *prevChPtr; Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* State info for channel */ NextChannelHandler *nhPtr; /* * Find the entry and the previous one in the list. */ for (prevChPtr = NULL, chPtr = statePtr->chPtr; chPtr != NULL; chPtr = chPtr->nextPtr) { if ((chPtr->chanPtr == chanPtr) && (chPtr->clientData == clientData) && (chPtr->proc == proc)) { break; } prevChPtr = chPtr; } /* * If not found, return without doing anything. */ if (chPtr == NULL) { return; } /* * If ChannelHandlerEventProc is about to process this handler, tell it to * process the next one instead - we are going to delete *this* one. */ for (nhPtr = tsdPtr->nestedHandlerPtr; nhPtr != NULL; nhPtr = nhPtr->nestedHandlerPtr) { if (nhPtr->nextHandlerPtr == chPtr) { nhPtr->nextHandlerPtr = chPtr->nextPtr; } } /* * Splice it out of the list of channel handlers. */ if (prevChPtr == NULL) { statePtr->chPtr = chPtr->nextPtr; } else { prevChPtr->nextPtr = chPtr->nextPtr; } ckfree((char *) chPtr); /* * Recompute the interest list for the channel, so that infinite loops * will not result if Tcl_DeleteChannelHandler is called inside an event. */ statePtr->interestMask = 0; for (chPtr = statePtr->chPtr; chPtr != NULL; chPtr = chPtr->nextPtr) { statePtr->interestMask |= chPtr->mask; } UpdateInterest(statePtr->topChanPtr); } /* *---------------------------------------------------------------------- * * DeleteScriptRecord -- * * Delete a script record for this combination of channel, interp and * mask. * * Results: * None. * * Side effects: * Deletes a script record and cancels a channel event handler. * *---------------------------------------------------------------------- */ static void DeleteScriptRecord( Tcl_Interp *interp, /* Interpreter in which script was to be * executed. */ Channel *chanPtr, /* The channel for which to delete the script * record (if any). */ int mask) /* Events in mask must exactly match mask of * script to delete. */ { ChannelState *statePtr = chanPtr->state; /* State info for channel */ EventScriptRecord *esPtr, *prevEsPtr; for (esPtr = statePtr->scriptRecordPtr, prevEsPtr = NULL; esPtr != NULL; prevEsPtr = esPtr, esPtr = esPtr->nextPtr) { if ((esPtr->interp == interp) && (esPtr->mask == mask)) { if (esPtr == statePtr->scriptRecordPtr) { statePtr->scriptRecordPtr = esPtr->nextPtr; } else { prevEsPtr->nextPtr = esPtr->nextPtr; } Tcl_DeleteChannelHandler((Tcl_Channel) chanPtr, TclChannelEventScriptInvoker, esPtr); TclDecrRefCount(esPtr->scriptPtr); ckfree((char *) esPtr); break; } } } /* *---------------------------------------------------------------------- * * CreateScriptRecord -- * * Creates a record to store a script to be executed when a specific * event fires on a specific channel. * * Results: * None. * * Side effects: * Causes the script to be stored for later execution. * *---------------------------------------------------------------------- */ static void CreateScriptRecord( Tcl_Interp *interp, /* Interpreter in which to execute the stored * script. */ Channel *chanPtr, /* Channel for which script is to be stored */ int mask, /* Set of events for which script will be * invoked. */ Tcl_Obj *scriptPtr) /* Pointer to script object. */ { ChannelState *statePtr = chanPtr->state; /* State info for channel */ EventScriptRecord *esPtr; for (esPtr=statePtr->scriptRecordPtr; esPtr!=NULL; esPtr=esPtr->nextPtr) { if ((esPtr->interp == interp) && (esPtr->mask == mask)) { TclDecrRefCount(esPtr->scriptPtr); esPtr->scriptPtr = NULL; break; } } if (esPtr == NULL) { esPtr = (EventScriptRecord *) ckalloc(sizeof(EventScriptRecord)); Tcl_CreateChannelHandler((Tcl_Channel) chanPtr, mask, TclChannelEventScriptInvoker, esPtr); esPtr->nextPtr = statePtr->scriptRecordPtr; statePtr->scriptRecordPtr = esPtr; } esPtr->chanPtr = chanPtr; esPtr->interp = interp; esPtr->mask = mask; Tcl_IncrRefCount(scriptPtr); esPtr->scriptPtr = scriptPtr; } /* *---------------------------------------------------------------------- * * TclChannelEventScriptInvoker -- * * Invokes a script scheduled by "fileevent" for when the channel becomes * ready for IO. This function is invoked by the channel handler which * was created by the Tcl "fileevent" command. * * Results: * None. * * Side effects: * Whatever the script does. * *---------------------------------------------------------------------- */ void TclChannelEventScriptInvoker( ClientData clientData, /* The script+interp record. */ int mask) /* Not used. */ { Tcl_Interp *interp; /* Interpreter in which to eval the script. */ Channel *chanPtr; /* The channel for which this handler is * registered. */ EventScriptRecord *esPtr; /* The event script + interpreter to eval it * in. */ int result; /* Result of call to eval script. */ esPtr = clientData; chanPtr = esPtr->chanPtr; mask = esPtr->mask; interp = esPtr->interp; /* * We must preserve the interpreter so we can report errors on it later. * Note that we do not need to preserve the channel because that is done * by Tcl_NotifyChannel before calling channel handlers. */ Tcl_Preserve(interp); result = Tcl_EvalObjEx(interp, esPtr->scriptPtr, TCL_EVAL_GLOBAL); /* * On error, cause a background error and remove the channel handler and * the script record. * * NOTE: Must delete channel handler before causing the background error * because the background error may want to reinstall the handler. */ if (result != TCL_OK) { if (chanPtr->typePtr != NULL) { DeleteScriptRecord(interp, chanPtr, mask); } TclBackgroundException(interp, result); } Tcl_Release(interp); } /* *---------------------------------------------------------------------- * * Tcl_FileEventObjCmd -- * * This procedure implements the "fileevent" Tcl command. See the user * documentation for details on what it does. This command is based on * the Tk command "fileevent" which in turn is based on work contributed * by Mark Diekhans. * * Results: * A standard Tcl result. * * Side effects: * May create a channel handler for the specified channel. * *---------------------------------------------------------------------- */ /* ARGSUSED */ int Tcl_FileEventObjCmd( ClientData clientData, /* Not used. */ Tcl_Interp *interp, /* Interpreter in which the channel for which * to create the handler is found. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Channel *chanPtr; /* The channel to create the handler for. */ ChannelState *statePtr; /* State info for channel */ Tcl_Channel chan; /* The opaque type for the channel. */ char *chanName; int modeIndex; /* Index of mode argument. */ int mask; static const char *modeOptions[] = {"readable", "writable", NULL}; static int maskArray[] = {TCL_READABLE, TCL_WRITABLE}; if ((objc != 3) && (objc != 4)) { Tcl_WrongNumArgs(interp, 1, objv, "channelId event ?script?"); return TCL_ERROR; } if (Tcl_GetIndexFromObj(interp, objv[2], modeOptions, "event name", 0, &modeIndex) != TCL_OK) { return TCL_ERROR; } mask = maskArray[modeIndex]; chanName = TclGetString(objv[1]); chan = Tcl_GetChannel(interp, chanName, NULL); if (chan == NULL) { return TCL_ERROR; } chanPtr = (Channel *) chan; statePtr = chanPtr->state; if ((statePtr->flags & mask) == 0) { Tcl_AppendResult(interp, "channel is not ", (mask == TCL_READABLE) ? "readable" : "writable", NULL); return TCL_ERROR; } /* * If we are supposed to return the script, do so. */ if (objc == 3) { EventScriptRecord *esPtr; for (esPtr = statePtr->scriptRecordPtr; esPtr != NULL; esPtr = esPtr->nextPtr) { if ((esPtr->interp == interp) && (esPtr->mask == mask)) { Tcl_SetObjResult(interp, esPtr->scriptPtr); break; } } return TCL_OK; } /* * If we are supposed to delete a stored script, do so. */ if (*(TclGetString(objv[3])) == '\0') { DeleteScriptRecord(interp, chanPtr, mask); return TCL_OK; } /* * Make the script record that will link between the event and the script * to invoke. This also creates a channel event handler which will * evaluate the script in the supplied interpreter. */ CreateScriptRecord(interp, chanPtr, mask, objv[3]); return TCL_OK; } /* *---------------------------------------------------------------------- * * TclCopyChannel -- * * This routine copies data from one channel to another, either * synchronously or asynchronously. If a command script is supplied, the * operation runs in the background. The script is invoked when the copy * completes. Otherwise the function waits until the copy is completed * before returning. * * Results: * A standard Tcl result. * * Side effects: * May schedule a background copy operation that causes both channels to * be marked busy. * *---------------------------------------------------------------------- */ int TclCopyChannel( Tcl_Interp *interp, /* Current interpreter. */ Tcl_Channel inChan, /* Channel to read from. */ Tcl_Channel outChan, /* Channel to write to. */ int toRead, /* Amount of data to copy, or -1 for all. */ Tcl_Obj *cmdPtr) /* Pointer to script to execute or NULL. */ { Channel *inPtr = (Channel *) inChan; Channel *outPtr = (Channel *) outChan; ChannelState *inStatePtr, *outStatePtr; int readFlags, writeFlags; CopyState *csPtr; int nonBlocking = (cmdPtr) ? CHANNEL_NONBLOCKING : 0; inStatePtr = inPtr->state; outStatePtr = outPtr->state; if (BUSY_STATE(inStatePtr,TCL_READABLE)) { if (interp) { Tcl_AppendResult(interp, "channel \"", Tcl_GetChannelName(inChan), "\" is busy", NULL); } return TCL_ERROR; } if (BUSY_STATE(outStatePtr,TCL_WRITABLE)) { if (interp) { Tcl_AppendResult(interp, "channel \"", Tcl_GetChannelName(outChan), "\" is busy", NULL); } return TCL_ERROR; } readFlags = inStatePtr->flags; writeFlags = outStatePtr->flags; /* * Set up the blocking mode appropriately. Background copies need * non-blocking channels. Foreground copies need blocking channels. If * there is an error, restore the old blocking mode. */ if (nonBlocking != (readFlags & CHANNEL_NONBLOCKING)) { if (SetBlockMode(interp, inPtr, nonBlocking ? TCL_MODE_NONBLOCKING : TCL_MODE_BLOCKING) != TCL_OK) { return TCL_ERROR; } } if ((inPtr!=outPtr) && (nonBlocking!=(writeFlags&CHANNEL_NONBLOCKING)) && (SetBlockMode(NULL, outPtr, nonBlocking ? TCL_MODE_NONBLOCKING : TCL_MODE_BLOCKING) != TCL_OK) && (nonBlocking != (readFlags & CHANNEL_NONBLOCKING))) { SetBlockMode(NULL, inPtr, (readFlags & CHANNEL_NONBLOCKING) ? TCL_MODE_NONBLOCKING : TCL_MODE_BLOCKING); return TCL_ERROR; } /* * Make sure the output side is unbuffered. */ outStatePtr->flags = (outStatePtr->flags & ~(CHANNEL_LINEBUFFERED)) | CHANNEL_UNBUFFERED; /* * Allocate a new CopyState to maintain info about the current copy in * progress. This structure will be deallocated when the copy is * completed. */ csPtr = (CopyState *) ckalloc(sizeof(CopyState) + inStatePtr->bufSize); csPtr->bufSize = inStatePtr->bufSize; csPtr->readPtr = inPtr; csPtr->writePtr = outPtr; csPtr->readFlags = readFlags; csPtr->writeFlags = writeFlags; csPtr->toRead = toRead; csPtr->total = 0; csPtr->interp = interp; if (cmdPtr) { Tcl_IncrRefCount(cmdPtr); } csPtr->cmdPtr = cmdPtr; inStatePtr->csPtrR = csPtr; outStatePtr->csPtrW = csPtr; /* * Start copying data between the channels. */ return CopyData(csPtr, 0); } /* *---------------------------------------------------------------------- * * CopyData -- * * This function implements the lowest level of the copying mechanism for * TclCopyChannel. * * Results: * Returns TCL_OK on success, else TCL_ERROR. * * Side effects: * Moves data between channels, may create channel handlers. * *---------------------------------------------------------------------- */ static int CopyData( CopyState *csPtr, /* State of copy operation. */ int mask) /* Current channel event flags. */ { Tcl_Interp *interp; Tcl_Obj *cmdPtr, *errObj = NULL, *bufObj = NULL, *msg = NULL; Tcl_Channel inChan, outChan; ChannelState *inStatePtr, *outStatePtr; int result = TCL_OK, size, total, sizeb; char *buffer; int inBinary, outBinary, sameEncoding; /* Encoding control */ int underflow; /* Input underflow */ inChan = (Tcl_Channel) csPtr->readPtr; outChan = (Tcl_Channel) csPtr->writePtr; inStatePtr = csPtr->readPtr->state; outStatePtr = csPtr->writePtr->state; interp = csPtr->interp; cmdPtr = csPtr->cmdPtr; /* * Copy the data the slow way, using the translation mechanism. * * Note: We have make sure that we use the topmost channel in a stack for * the copying. The caller uses Tcl_GetChannel to access it, and thus gets * the bottom of the stack. */ inBinary = (inStatePtr->encoding == NULL); outBinary = (outStatePtr->encoding == NULL); sameEncoding = (inStatePtr->encoding == outStatePtr->encoding); if (!(inBinary || sameEncoding)) { TclNewObj(bufObj); Tcl_IncrRefCount(bufObj); } while (csPtr->toRead != 0) { /* * Check for unreported background errors. */ Tcl_GetChannelError(inChan, &msg); if ((inStatePtr->unreportedError != 0) || (msg != NULL)) { Tcl_SetErrno(inStatePtr->unreportedError); inStatePtr->unreportedError = 0; goto readError; } Tcl_GetChannelError(outChan, &msg); if ((outStatePtr->unreportedError != 0) || (msg != NULL)) { Tcl_SetErrno(outStatePtr->unreportedError); outStatePtr->unreportedError = 0; goto writeError; } if (cmdPtr && (mask == 0)) { /* * In async mode, we skip reading synchronously and fake an * underflow instead to prime the readable fileevent. */ size = 0; underflow = 1; } else { /* * Read up to bufSize bytes. */ if ((csPtr->toRead == -1) || (csPtr->toRead > csPtr->bufSize)) { sizeb = csPtr->bufSize; } else { sizeb = csPtr->toRead; } if (inBinary || sameEncoding) { size = DoRead(inStatePtr->topChanPtr, csPtr->buffer, sizeb); } else { size = DoReadChars(inStatePtr->topChanPtr, bufObj, sizeb, 0 /* No append */); } underflow = (size >= 0) && (size < sizeb); /* Input underflow */ } if (size < 0) { readError: if (interp) { TclNewObj(errObj); Tcl_AppendStringsToObj(errObj, "error reading \"", Tcl_GetChannelName(inChan), "\": ", NULL); if (msg != NULL) { Tcl_AppendObjToObj(errObj, msg); } else { Tcl_AppendStringsToObj(errObj, Tcl_PosixError(interp), NULL); } } if (msg != NULL) { Tcl_DecrRefCount(msg); } break; } else if (underflow) { /* * We had an underflow on the read side. If we are at EOF, and not * in the synchronous part of an asynchronous fcopy, then the * copying is done, otherwise set up a channel handler to detect * when the channel becomes readable again. */ if ((size == 0) && Tcl_Eof(inChan) && !(cmdPtr && (mask == 0))) { break; } if (((!Tcl_Eof(inChan)) || (cmdPtr && (mask == 0))) && !(mask & TCL_READABLE)) { if (mask & TCL_WRITABLE) { Tcl_DeleteChannelHandler(outChan, CopyEventProc, csPtr); } Tcl_CreateChannelHandler(inChan, TCL_READABLE, CopyEventProc, csPtr); } if (size == 0) { if (bufObj != NULL) { TclDecrRefCount(bufObj); bufObj = NULL; } return TCL_OK; } } /* * Now write the buffer out. */ if (inBinary || sameEncoding) { buffer = csPtr->buffer; sizeb = size; } else { buffer = TclGetStringFromObj(bufObj, &sizeb); } if (outBinary || sameEncoding) { sizeb = DoWrite(outStatePtr->topChanPtr, buffer, sizeb); } else { sizeb = DoWriteChars(outStatePtr->topChanPtr, buffer, sizeb); } if (inBinary || sameEncoding) { /* * Both read and write counted bytes. */ size = sizeb; } /* else: Read counted characters, write counted bytes, i.e. * size != sizeb */ if (sizeb < 0) { writeError: if (interp) { TclNewObj(errObj); Tcl_AppendStringsToObj(errObj, "error writing \"", Tcl_GetChannelName(outChan), "\": ", NULL); if (msg != NULL) { Tcl_AppendObjToObj(errObj, msg); } else { Tcl_AppendStringsToObj(errObj, Tcl_PosixError(interp), NULL); } } if (msg != NULL) { Tcl_DecrRefCount(msg); } break; } /* * Update the current byte count. Do it now so the count is valid * before a return or break takes us out of the loop. The invariant at * the top of the loop should be that csPtr->toRead holds the number * of bytes left to copy. */ if (csPtr->toRead != -1) { csPtr->toRead -= size; } csPtr->total += size; /* * Break loop if EOF && (size>0) */ if (Tcl_Eof(inChan)) { break; } /* * Check to see if the write is happening in the background. If so, * stop copying and wait for the channel to become writable again. * After input underflow we already installed a readable handler * therefore we don't need a writable handler. */ if (!underflow && (outStatePtr->flags & BG_FLUSH_SCHEDULED)) { if (!(mask & TCL_WRITABLE)) { if (mask & TCL_READABLE) { Tcl_DeleteChannelHandler(inChan, CopyEventProc, csPtr); } Tcl_CreateChannelHandler(outChan, TCL_WRITABLE, CopyEventProc, csPtr); } if (bufObj != NULL) { TclDecrRefCount(bufObj); bufObj = NULL; } return TCL_OK; } /* * For background copies, we only do one buffer per invocation so we * don't starve the rest of the system. */ if (cmdPtr && (csPtr->toRead != 0)) { /* * The first time we enter this code, there won't be a channel * handler established yet, so do it here. */ if (mask == 0) { Tcl_CreateChannelHandler(outChan, TCL_WRITABLE, CopyEventProc, csPtr); } if (bufObj != NULL) { TclDecrRefCount(bufObj); bufObj = NULL; } return TCL_OK; } } /* while */ if (bufObj != NULL) { TclDecrRefCount(bufObj); bufObj = NULL; } /* * Make the callback or return the number of bytes transferred. The local * total is used because StopCopy frees csPtr. */ total = csPtr->total; if (cmdPtr && interp) { int code; /* * Get a private copy of the command so we can mutate it by adding * arguments. Note that StopCopy frees our saved reference to the * original command obj. */ cmdPtr = Tcl_DuplicateObj(cmdPtr); Tcl_IncrRefCount(cmdPtr); StopCopy(csPtr); Tcl_Preserve(interp); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewIntObj(total)); if (errObj) { Tcl_ListObjAppendElement(interp, cmdPtr, errObj); } code = Tcl_EvalObjEx(interp, cmdPtr, TCL_EVAL_GLOBAL); if (code != TCL_OK) { TclBackgroundException(interp, code); result = TCL_ERROR; } TclDecrRefCount(cmdPtr); Tcl_Release(interp); } else { StopCopy(csPtr); if (interp) { if (errObj) { Tcl_SetObjResult(interp, errObj); result = TCL_ERROR; } else { Tcl_ResetResult(interp); Tcl_SetObjResult(interp, Tcl_NewIntObj(total)); } } } return result; } /* *---------------------------------------------------------------------- * * DoRead -- * * Reads a given number of bytes from a channel. * * No encoding conversions are applied to the bytes being read. * * Results: * The number of characters read, or -1 on error. Use Tcl_GetErrno() to * retrieve the error code for the error that occurred. * * Side effects: * May cause input to be buffered. * *---------------------------------------------------------------------- */ static int DoRead( Channel *chanPtr, /* The channel from which to read. */ char *bufPtr, /* Where to store input read. */ int toRead) /* Maximum number of bytes to read. */ { ChannelState *statePtr = chanPtr->state; /* State info for channel */ int copied; /* How many characters were copied into the * result string? */ int copiedNow; /* How many characters were copied from the * current input buffer? */ int result; /* Of calling GetInput. */ /* * If we have not encountered a sticky EOF, clear the EOF bit. Either way * clear the BLOCKED bit. We want to discover these anew during each * operation. */ if (!(statePtr->flags & CHANNEL_STICKY_EOF)) { ResetFlag(statePtr, CHANNEL_EOF); } ResetFlag(statePtr, CHANNEL_BLOCKED | CHANNEL_NEED_MORE_DATA); for (copied = 0; copied < toRead; copied += copiedNow) { copiedNow = CopyAndTranslateBuffer(statePtr, bufPtr + copied, toRead - copied); if (copiedNow == 0) { if (statePtr->flags & CHANNEL_EOF) { goto done; } if (statePtr->flags & CHANNEL_BLOCKED) { if (statePtr->flags & CHANNEL_NONBLOCKING) { goto done; } ResetFlag(statePtr, CHANNEL_BLOCKED); } result = GetInput(chanPtr); if (result != 0) { if (result != EAGAIN) { copied = -1; } goto done; } } } ResetFlag(statePtr, CHANNEL_BLOCKED); /* * Update the notifier state so we don't block while there is still data * in the buffers. */ done: UpdateInterest(chanPtr); return copied; } /* *---------------------------------------------------------------------- * * CopyAndTranslateBuffer -- * * Copy at most one buffer of input to the result space, doing eol * translations according to mode in effect currently. * * Results: * Number of bytes stored in the result buffer (as opposed to the number * of bytes read from the channel). May return zero if no input is * available to be translated. * * Side effects: * Consumes buffered input. May deallocate one buffer. * *---------------------------------------------------------------------- */ static int CopyAndTranslateBuffer( ChannelState *statePtr, /* Channel state from which to read input. */ char *result, /* Where to store the copied input. */ int space) /* How many bytes are available in result to * store the copied input? */ { ChannelBuffer *bufPtr; /* The buffer from which to copy bytes. */ int bytesInBuffer; /* How many bytes are available to be copied * in the current input buffer? */ int copied; /* How many characters were already copied * into the destination space? */ int i; /* Iterates over the copied input looking for * the input eofChar. */ /* * If there is no input at all, return zero. The invariant is that either * there is no buffer in the queue, or if the first buffer is empty, it is * also the last buffer (and thus there is no input in the queue). Note * also that if the buffer is empty, we leave it in the queue. */ if (statePtr->inQueueHead == NULL) { return 0; } bufPtr = statePtr->inQueueHead; bytesInBuffer = BytesLeft(bufPtr); copied = 0; switch (statePtr->inputTranslation) { case TCL_TRANSLATE_LF: if (bytesInBuffer == 0) { return 0; } /* * Copy the current chunk into the result buffer. */ if (bytesInBuffer < space) { space = bytesInBuffer; } memcpy(result, RemovePoint(bufPtr), (size_t) space); bufPtr->nextRemoved += space; copied = space; break; case TCL_TRANSLATE_CR: { char *end; if (bytesInBuffer == 0) { return 0; } /* * Copy the current chunk into the result buffer, then replace all \r * with \n. */ if (bytesInBuffer < space) { space = bytesInBuffer; } memcpy(result, RemovePoint(bufPtr), (size_t) space); bufPtr->nextRemoved += space; copied = space; for (end = result + copied; result < end; result++) { if (*result == '\r') { *result = '\n'; } } break; } case TCL_TRANSLATE_CRLF: { char *src, *end, *dst; int curByte; /* * If there is a held-back "\r" at EOF, produce it now. */ if (bytesInBuffer == 0) { if ((statePtr->flags & (INPUT_SAW_CR | CHANNEL_EOF)) == (INPUT_SAW_CR | CHANNEL_EOF)) { result[0] = '\r'; ResetFlag(statePtr, INPUT_SAW_CR); return 1; } return 0; } /* * Copy the current chunk and replace "\r\n" with "\n" (but not * standalone "\r"!). */ if (bytesInBuffer < space) { space = bytesInBuffer; } memcpy(result, RemovePoint(bufPtr), (size_t) space); bufPtr->nextRemoved += space; copied = space; end = result + copied; dst = result; for (src = result; src < end; src++) { curByte = *src; if (curByte == '\n') { ResetFlag(statePtr, INPUT_SAW_CR); } else if (statePtr->flags & INPUT_SAW_CR) { ResetFlag(statePtr, INPUT_SAW_CR); *dst = '\r'; dst++; } if (curByte == '\r') { SetFlag(statePtr, INPUT_SAW_CR); } else { *dst = (char) curByte; dst++; } } copied = dst - result; break; } case TCL_TRANSLATE_AUTO: { char *src, *end, *dst; int curByte; if (bytesInBuffer == 0) { return 0; } /* * Loop over the current buffer, converting "\r" and "\r\n" to "\n". */ if (bytesInBuffer < space) { space = bytesInBuffer; } memcpy(result, RemovePoint(bufPtr), (size_t) space); bufPtr->nextRemoved += space; copied = space; end = result + copied; dst = result; for (src = result; src < end; src++) { curByte = *src; if (curByte == '\r') { SetFlag(statePtr, INPUT_SAW_CR); *dst = '\n'; dst++; } else { if ((curByte != '\n') || !(statePtr->flags & INPUT_SAW_CR)) { *dst = (char) curByte; dst++; } ResetFlag(statePtr, INPUT_SAW_CR); } } copied = dst - result; break; } default: Tcl_Panic("unknown eol translation mode"); } /* * If an in-stream EOF character is set for this channel, check that the * input we copied so far does not contain the EOF char. If it does, copy * only up to and excluding that character. */ if (statePtr->inEofChar != 0) { for (i = 0; i < copied; i++) { if (result[i] == (char) statePtr->inEofChar) { /* * Set sticky EOF so that no further input is presented to the * caller. */ SetFlag(statePtr, CHANNEL_EOF | CHANNEL_STICKY_EOF); statePtr->inputEncodingFlags |= TCL_ENCODING_END; copied = i; break; } } } /* * If the current buffer is empty recycle it. */ if (IsBufferEmpty(bufPtr)) { statePtr->inQueueHead = bufPtr->nextPtr; if (statePtr->inQueueHead == NULL) { statePtr->inQueueTail = NULL; } RecycleBuffer(statePtr, bufPtr, 0); } /* * Return the number of characters copied into the result buffer. This may * be different from the number of bytes consumed, because of EOL * translations. */ return copied; } /* *---------------------------------------------------------------------- * * CopyBuffer -- * * Copy at most one buffer of input to the result space. * * Results: * Number of bytes stored in the result buffer. May return zero if no * input is available. * * Side effects: * Consumes buffered input. May deallocate one buffer. * *---------------------------------------------------------------------- */ static int CopyBuffer( Channel *chanPtr, /* Channel from which to read input. */ char *result, /* Where to store the copied input. */ int space) /* How many bytes are available in result to * store the copied input? */ { ChannelBuffer *bufPtr; /* The buffer from which to copy bytes. */ int bytesInBuffer; /* How many bytes are available to be copied * in the current input buffer? */ int copied; /* How many characters were already copied * into the destination space? */ /* * If there is no input at all, return zero. The invariant is that either * there is no buffer in the queue, or if the first buffer is empty, it is * also the last buffer (and thus there is no input in the queue). Note * also that if the buffer is empty, we don't leave it in the queue, but * recycle it. */ if (chanPtr->inQueueHead == NULL) { return 0; } bufPtr = chanPtr->inQueueHead; bytesInBuffer = BytesLeft(bufPtr); copied = 0; if (bytesInBuffer == 0) { RecycleBuffer(chanPtr->state, bufPtr, 0); chanPtr->inQueueHead = NULL; chanPtr->inQueueTail = NULL; return 0; } /* * Copy the current chunk into the result buffer. */ if (bytesInBuffer < space) { space = bytesInBuffer; } memcpy(result, RemovePoint(bufPtr), (size_t) space); bufPtr->nextRemoved += space; copied = space; /* * We don't care about in-stream EOF characters here as the data read here * may still flow through one or more transformations, i.e. is not in its * final state yet. */ /* * If the current buffer is empty recycle it. */ if (IsBufferEmpty(bufPtr)) { chanPtr->inQueueHead = bufPtr->nextPtr; if (chanPtr->inQueueHead == NULL) { chanPtr->inQueueTail = NULL; } RecycleBuffer(chanPtr->state, bufPtr, 0); } /* * Return the number of characters copied into the result buffer. */ return copied; } /* *---------------------------------------------------------------------- * * DoWrite -- * * Puts a sequence of characters into an output buffer, may queue the * buffer for output if it gets full, and also remembers whether the * current buffer is ready e.g. if it contains a newline and we are in * line buffering mode. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ static int DoWrite( Channel *chanPtr, /* The channel to buffer output for. */ const char *src, /* Data to write. */ int srcLen) /* Number of bytes to write. */ { ChannelState *statePtr = chanPtr->state; /* State info for channel */ ChannelBuffer *outBufPtr; /* Current output buffer. */ int foundNewline; /* Did we find a newline in output? */ char *dPtr; const char *sPtr; /* Search variables for newline. */ int crsent; /* In CRLF eol translation mode, remember the * fact that a CR was output to the channel * without its following NL. */ int i; /* Loop index for newline search. */ int destCopied; /* How many bytes were used in this * destination buffer to hold the output? */ int totalDestCopied; /* How many bytes total were copied to the * channel buffer? */ int srcCopied; /* How many bytes were copied from the source * string? */ char *destPtr; /* Where in line to copy to? */ /* * If we are in network (or windows) translation mode, record the fact * that we have not yet sent a CR to the channel. */ crsent = 0; /* * Loop filling buffers and flushing them until all output has been * consumed. */ srcCopied = 0; totalDestCopied = 0; while (srcLen > 0) { /* * Make sure there is a current output buffer to accept output. */ if (statePtr->curOutPtr == NULL) { statePtr->curOutPtr = AllocChannelBuffer(statePtr->bufSize); } outBufPtr = statePtr->curOutPtr; destCopied = SpaceLeft(outBufPtr); if (destCopied > srcLen) { destCopied = srcLen; } destPtr = InsertPoint(outBufPtr); switch (statePtr->outputTranslation) { case TCL_TRANSLATE_LF: srcCopied = destCopied; memcpy(destPtr, src, (size_t) destCopied); break; case TCL_TRANSLATE_CR: srcCopied = destCopied; memcpy(destPtr, src, (size_t) destCopied); for (dPtr = destPtr; dPtr < destPtr + destCopied; dPtr++) { if (*dPtr == '\n') { *dPtr = '\r'; } } break; case TCL_TRANSLATE_CRLF: for (srcCopied = 0, dPtr = destPtr, sPtr = src; dPtr < destPtr + destCopied; dPtr++, sPtr++, srcCopied++) { if (*sPtr == '\n') { if (crsent) { *dPtr = '\n'; crsent = 0; } else { *dPtr = '\r'; crsent = 1; sPtr--, srcCopied--; } } else { *dPtr = *sPtr; } } break; case TCL_TRANSLATE_AUTO: Tcl_Panic("Tcl_Write: AUTO output translation mode not supported"); default: Tcl_Panic("Tcl_Write: unknown output translation mode"); } /* * The current buffer is ready for output if it is full, or if it * contains a newline and this channel is line-buffered, or if it * contains any output and this channel is unbuffered. */ outBufPtr->nextAdded += destCopied; if (!(statePtr->flags & BUFFER_READY)) { if (IsBufferFull(outBufPtr)) { SetFlag(statePtr, BUFFER_READY); } else if (statePtr->flags & CHANNEL_LINEBUFFERED) { for (sPtr = src, i = 0, foundNewline = 0; (i < srcCopied) && (!foundNewline); i++, sPtr++) { if (*sPtr == '\n') { foundNewline = 1; break; } } if (foundNewline) { SetFlag(statePtr, BUFFER_READY); } } else if (statePtr->flags & CHANNEL_UNBUFFERED) { SetFlag(statePtr, BUFFER_READY); } } totalDestCopied += srcCopied; src += srcCopied; srcLen -= srcCopied; if (statePtr->flags & BUFFER_READY) { if (FlushChannel(NULL, chanPtr, 0) != 0) { return -1; } } } /* Closes "while" */ return totalDestCopied; } /* *---------------------------------------------------------------------- * * CopyEventProc -- * * This routine is invoked as a channel event handler for the background * copy operation. It is just a trivial wrapper around the CopyData * routine. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ static void CopyEventProc( ClientData clientData, int mask) { (void) CopyData((CopyState *) clientData, mask); } /* *---------------------------------------------------------------------- * * StopCopy -- * * This routine halts a copy that is in progress. * * Results: * None. * * Side effects: * Removes any pending channel handlers and restores the blocking and * buffering modes of the channels. The CopyState is freed. * *---------------------------------------------------------------------- */ static void StopCopy( CopyState *csPtr) /* State for bg copy to stop . */ { ChannelState *inStatePtr, *outStatePtr; int nonBlocking; if (!csPtr) { return; } inStatePtr = csPtr->readPtr->state; outStatePtr = csPtr->writePtr->state; /* * Restore the old blocking mode and output buffering mode. */ nonBlocking = (csPtr->readFlags & CHANNEL_NONBLOCKING); if (nonBlocking != (inStatePtr->flags & CHANNEL_NONBLOCKING)) { SetBlockMode(NULL, csPtr->readPtr, nonBlocking ? TCL_MODE_NONBLOCKING : TCL_MODE_BLOCKING); } if (csPtr->readPtr != csPtr->writePtr) { nonBlocking = (csPtr->writeFlags & CHANNEL_NONBLOCKING); if (nonBlocking != (outStatePtr->flags & CHANNEL_NONBLOCKING)) { SetBlockMode(NULL, csPtr->writePtr, nonBlocking ? TCL_MODE_NONBLOCKING : TCL_MODE_BLOCKING); } } outStatePtr->flags &= ~(CHANNEL_LINEBUFFERED | CHANNEL_UNBUFFERED); outStatePtr->flags |= csPtr->writeFlags & (CHANNEL_LINEBUFFERED | CHANNEL_UNBUFFERED); if (csPtr->cmdPtr) { Tcl_DeleteChannelHandler((Tcl_Channel) csPtr->readPtr, CopyEventProc, csPtr); if (csPtr->readPtr != csPtr->writePtr) { Tcl_DeleteChannelHandler((Tcl_Channel) csPtr->writePtr, CopyEventProc, csPtr); } TclDecrRefCount(csPtr->cmdPtr); } inStatePtr->csPtrR = NULL; outStatePtr->csPtrW = NULL; ckfree((char *) csPtr); } /* *---------------------------------------------------------------------- * * StackSetBlockMode -- * * This function sets the blocking mode for a channel, iterating through * each channel in a stack and updates the state flags. * * Results: * 0 if OK, result code from failed blockModeProc otherwise. * * Side effects: * Modifies the blocking mode of the channel and possibly generates an * error. * *---------------------------------------------------------------------- */ static int StackSetBlockMode( Channel *chanPtr, /* Channel to modify. */ int mode) /* One of TCL_MODE_BLOCKING or * TCL_MODE_NONBLOCKING. */ { int result = 0; Tcl_DriverBlockModeProc *blockModeProc; /* * Start at the top of the channel stack */ chanPtr = chanPtr->state->topChanPtr; while (chanPtr != NULL) { blockModeProc = Tcl_ChannelBlockModeProc(chanPtr->typePtr); if (blockModeProc != NULL) { result = (*blockModeProc) (chanPtr->instanceData, mode); if (result != 0) { Tcl_SetErrno(result); return result; } } chanPtr = chanPtr->downChanPtr; } return 0; } /* *---------------------------------------------------------------------- * * SetBlockMode -- * * This function sets the blocking mode for a channel and updates the * state flags. * * Results: * A standard Tcl result. * * Side effects: * Modifies the blocking mode of the channel and possibly generates an * error. * *---------------------------------------------------------------------- */ static int SetBlockMode( Tcl_Interp *interp, /* Interp for error reporting. */ Channel *chanPtr, /* Channel to modify. */ int mode) /* One of TCL_MODE_BLOCKING or * TCL_MODE_NONBLOCKING. */ { int result = 0; ChannelState *statePtr = chanPtr->state; /* State info for channel */ result = StackSetBlockMode(chanPtr, mode); if (result != 0) { if (interp != NULL) { /* * TIP #219. * Move error messages put by the driver into the bypass area and * put them into the regular interpreter result. Fall back to the * regular message if nothing was found in the bypass. * * Note that we cannot have a message in the interpreter bypass * area, StackSetBlockMode is restricted to the channel bypass. * We still need the interp as the destination of the move. */ if (!TclChanCaughtErrorBypass(interp, (Tcl_Channel) chanPtr)) { Tcl_AppendResult(interp, "error setting blocking mode: ", Tcl_PosixError(interp), NULL); } } else { /* * TIP #219. * If we have no interpreter to put a bypass message into we have * to clear it, to prevent its propagation and use in other places * unrelated to the actual occurence of the problem. */ Tcl_SetChannelError((Tcl_Channel) chanPtr, NULL); } return TCL_ERROR; } if (mode == TCL_MODE_BLOCKING) { ResetFlag(statePtr, CHANNEL_NONBLOCKING | BG_FLUSH_SCHEDULED); } else { SetFlag(statePtr, CHANNEL_NONBLOCKING); } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelNames -- * * Return the names of all open channels in the interp. * * Results: * TCL_OK or TCL_ERROR. * * Side effects: * Interp result modified with list of channel names. * *---------------------------------------------------------------------- */ int Tcl_GetChannelNames( Tcl_Interp *interp) /* Interp for error reporting. */ { return Tcl_GetChannelNamesEx(interp, NULL); } /* *---------------------------------------------------------------------- * * Tcl_GetChannelNamesEx -- * * Return the names of open channels in the interp filtered filtered * through a pattern. If pattern is NULL, it returns all the open * channels. * * Results: * TCL_OK or TCL_ERROR. * * Side effects: * Interp result modified with list of channel names. * *---------------------------------------------------------------------- */ int Tcl_GetChannelNamesEx( Tcl_Interp *interp, /* Interp for error reporting. */ const char *pattern) /* Pattern to filter on. */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); ChannelState *statePtr; const char *name; /* Name for channel */ Tcl_Obj *resultPtr; /* Pointer to result object */ Tcl_HashTable *hTblPtr; /* Hash table of channels. */ Tcl_HashEntry *hPtr; /* Search variable. */ Tcl_HashSearch hSearch; /* Search variable. */ if (interp == NULL) { return TCL_OK; } /* * Get the channel table that stores the channels registered for this * interpreter. */ hTblPtr = GetChannelTable(interp); TclNewObj(resultPtr); if ((pattern != NULL) && TclMatchIsTrivial(pattern) && !((pattern[0] == 's') && (pattern[1] == 't') && (pattern[2] == 'd'))) { if ((Tcl_FindHashEntry(hTblPtr, pattern) != NULL) && (Tcl_ListObjAppendElement(interp, resultPtr, Tcl_NewStringObj(pattern, -1)) != TCL_OK)) { goto error; } goto done; } for (hPtr = Tcl_FirstHashEntry(hTblPtr, &hSearch); hPtr != NULL; hPtr = Tcl_NextHashEntry(&hSearch)) { statePtr = ((Channel *) Tcl_GetHashValue(hPtr))->state; if (statePtr->topChanPtr == (Channel *) tsdPtr->stdinChannel) { name = "stdin"; } else if (statePtr->topChanPtr == (Channel *) tsdPtr->stdoutChannel) { name = "stdout"; } else if (statePtr->topChanPtr == (Channel *) tsdPtr->stderrChannel) { name = "stderr"; } else { /* * This is also stored in Tcl_GetHashKey(hTblPtr, hPtr), but it's * simpler to just grab the name from the statePtr. */ name = statePtr->channelName; } if (((pattern == NULL) || Tcl_StringMatch(name, pattern)) && (Tcl_ListObjAppendElement(interp, resultPtr, Tcl_NewStringObj(name, -1)) != TCL_OK)) { error: TclDecrRefCount(resultPtr); return TCL_ERROR; } } done: Tcl_SetObjResult(interp, resultPtr); return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_IsChannelRegistered -- * * Checks whether the channel is associated with the interp. See also * Tcl_RegisterChannel and Tcl_UnregisterChannel. * * Results: * 0 if the channel is not registered in the interpreter, 1 else. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_IsChannelRegistered( Tcl_Interp *interp, /* The interp to query of the channel */ Tcl_Channel chan) /* The channel to check */ { Tcl_HashTable *hTblPtr; /* Hash table of channels. */ Tcl_HashEntry *hPtr; /* Search variable. */ Channel *chanPtr; /* The real IO channel. */ ChannelState *statePtr; /* State of the real channel. */ /* * Always check bottom-most channel in the stack. This is the one that * gets registered. */ chanPtr = ((Channel *) chan)->state->bottomChanPtr; statePtr = chanPtr->state; hTblPtr = Tcl_GetAssocData(interp, "tclIO", NULL); if (hTblPtr == NULL) { return 0; } hPtr = Tcl_FindHashEntry(hTblPtr, statePtr->channelName); if (hPtr == NULL) { return 0; } if ((Channel *) Tcl_GetHashValue(hPtr) != chanPtr) { return 0; } return 1; } /* *---------------------------------------------------------------------- * * Tcl_IsChannelShared -- * * Checks whether the channel is shared by multiple interpreters. * * Results: * A boolean value (0 = Not shared, 1 = Shared). * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_IsChannelShared( Tcl_Channel chan) /* The channel to query */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of real channel structure. */ return ((statePtr->refCount > 1) ? 1 : 0); } /* *---------------------------------------------------------------------- * * Tcl_IsChannelExisting -- * * Checks whether a channel of the given name exists in the * (thread)-global list of all channels. See Tcl_GetChannelNamesEx for * function exposed at the Tcl level. * * Results: * A boolean value (0 = Does not exist, 1 = Does exist). * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_IsChannelExisting( const char *chanName) /* The name of the channel to look for. */ { ChannelState *statePtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); const char *name; int chanNameLen; chanNameLen = strlen(chanName); for (statePtr = tsdPtr->firstCSPtr; statePtr != NULL; statePtr = statePtr->nextCSPtr) { if (statePtr->topChanPtr == (Channel *) tsdPtr->stdinChannel) { name = "stdin"; } else if (statePtr->topChanPtr == (Channel *) tsdPtr->stdoutChannel) { name = "stdout"; } else if (statePtr->topChanPtr == (Channel *) tsdPtr->stderrChannel) { name = "stderr"; } else { name = statePtr->channelName; } /* Bug 2333466. Include \0 in the compare to prevent partial matching * on prefixes. */ if ((*chanName == *name) && (memcmp(name, chanName, (size_t) chanNameLen+1) == 0)) { return 1; } } return 0; } /* *---------------------------------------------------------------------- * * Tcl_ChannelName -- * * Return the name of the channel type. * * Results: * A pointer the name of the channel type. * * Side effects: * None. * *---------------------------------------------------------------------- */ const char * Tcl_ChannelName( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { return chanTypePtr->typeName; } /* *---------------------------------------------------------------------- * * Tcl_ChannelVersion -- * * Return the of version of the channel type. * * Results: * One of the TCL_CHANNEL_VERSION_* constants from tcl.h * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_ChannelTypeVersion Tcl_ChannelVersion( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { if (chanTypePtr->version == TCL_CHANNEL_VERSION_2) { return TCL_CHANNEL_VERSION_2; } else if (chanTypePtr->version == TCL_CHANNEL_VERSION_3) { return TCL_CHANNEL_VERSION_3; } else if (chanTypePtr->version == TCL_CHANNEL_VERSION_4) { return TCL_CHANNEL_VERSION_4; } else if (chanTypePtr->version == TCL_CHANNEL_VERSION_5) { return TCL_CHANNEL_VERSION_5; } else { /* * In = (PTR2INT(minimumVersion)); } /* *---------------------------------------------------------------------- * * Tcl_ChannelBlockModeProc -- * * Return the Tcl_DriverBlockModeProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverBlockModeProc * Tcl_ChannelBlockModeProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { if (HaveVersion(chanTypePtr, TCL_CHANNEL_VERSION_2)) { return chanTypePtr->blockModeProc; } else { /* * The v1 structure had the blockModeProc in a different place. */ return (Tcl_DriverBlockModeProc *) (chanTypePtr->version); } } /* *---------------------------------------------------------------------- * * Tcl_ChannelCloseProc -- * * Return the Tcl_DriverCloseProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverCloseProc * Tcl_ChannelCloseProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { return chanTypePtr->closeProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelClose2Proc -- * * Return the Tcl_DriverClose2Proc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverClose2Proc * Tcl_ChannelClose2Proc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { return chanTypePtr->close2Proc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelInputProc -- * * Return the Tcl_DriverInputProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverInputProc * Tcl_ChannelInputProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { return chanTypePtr->inputProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelOutputProc -- * * Return the Tcl_DriverOutputProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverOutputProc * Tcl_ChannelOutputProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { return chanTypePtr->outputProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelSeekProc -- * * Return the Tcl_DriverSeekProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverSeekProc * Tcl_ChannelSeekProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { return chanTypePtr->seekProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelSetOptionProc -- * * Return the Tcl_DriverSetOptionProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverSetOptionProc * Tcl_ChannelSetOptionProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { return chanTypePtr->setOptionProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelGetOptionProc -- * * Return the Tcl_DriverGetOptionProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverGetOptionProc * Tcl_ChannelGetOptionProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { return chanTypePtr->getOptionProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelWatchProc -- * * Return the Tcl_DriverWatchProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverWatchProc * Tcl_ChannelWatchProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { return chanTypePtr->watchProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelGetHandleProc -- * * Return the Tcl_DriverGetHandleProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverGetHandleProc * Tcl_ChannelGetHandleProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { return chanTypePtr->getHandleProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelFlushProc -- * * Return the Tcl_DriverFlushProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverFlushProc * Tcl_ChannelFlushProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { if (HaveVersion(chanTypePtr, TCL_CHANNEL_VERSION_2)) { return chanTypePtr->flushProc; } else { return NULL; } } /* *---------------------------------------------------------------------- * * Tcl_ChannelHandlerProc -- * * Return the Tcl_DriverHandlerProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverHandlerProc * Tcl_ChannelHandlerProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { if (HaveVersion(chanTypePtr, TCL_CHANNEL_VERSION_2)) { return chanTypePtr->handlerProc; } else { return NULL; } } /* *---------------------------------------------------------------------- * * Tcl_ChannelWideSeekProc -- * * Return the Tcl_DriverWideSeekProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverWideSeekProc * Tcl_ChannelWideSeekProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { if (HaveVersion(chanTypePtr, TCL_CHANNEL_VERSION_3)) { return chanTypePtr->wideSeekProc; } else { return NULL; } } /* *---------------------------------------------------------------------- * * Tcl_ChannelThreadActionProc -- * * TIP #218, Channel Thread Actions. Return the * Tcl_DriverThreadActionProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverThreadActionProc * Tcl_ChannelThreadActionProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { if (HaveVersion(chanTypePtr, TCL_CHANNEL_VERSION_4)) { return chanTypePtr->threadActionProc; } else { return NULL; } } /* *---------------------------------------------------------------------- * * Tcl_SetChannelErrorInterp -- * * TIP #219, Tcl Channel Reflection API. * Store an error message for the I/O system. * * Results: * None. * * Side effects: * Discards a previously stored message. * *---------------------------------------------------------------------- */ void Tcl_SetChannelErrorInterp( Tcl_Interp *interp, /* Interp to store the data into. */ Tcl_Obj *msg) /* Error message to store. */ { Interp *iPtr = (Interp *) interp; if (iPtr->chanMsg != NULL) { TclDecrRefCount(iPtr->chanMsg); iPtr->chanMsg = NULL; } if (msg != NULL) { iPtr->chanMsg = FixLevelCode(msg); Tcl_IncrRefCount(iPtr->chanMsg); } return; } /* *---------------------------------------------------------------------- * * Tcl_SetChannelError -- * * TIP #219, Tcl Channel Reflection API. * Store an error message for the I/O system. * * Results: * None. * * Side effects: * Discards a previously stored message. * *---------------------------------------------------------------------- */ void Tcl_SetChannelError( Tcl_Channel chan, /* Channel to store the data into. */ Tcl_Obj *msg) /* Error message to store. */ { ChannelState *statePtr = ((Channel *) chan)->state; if (statePtr->chanMsg != NULL) { TclDecrRefCount(statePtr->chanMsg); statePtr->chanMsg = NULL; } if (msg != NULL) { statePtr->chanMsg = FixLevelCode(msg); Tcl_IncrRefCount(statePtr->chanMsg); } return; } /* *---------------------------------------------------------------------- * * FixLevelCode -- * * TIP #219, Tcl Channel Reflection API. * Scans an error message for bad -code / -level directives. Returns a * modified copy with such directives corrected, and the input if it had * no problems. * * Results: * A Tcl_Obj* * * Side effects: * None. * *---------------------------------------------------------------------- */ static Tcl_Obj * FixLevelCode( Tcl_Obj *msg) { int explicitResult, numOptions, lc, lcn; Tcl_Obj **lv, **lvn; int res, i, j, val, lignore, cignore; int newlevel = -1, newcode = -1; /* ASSERT msg != NULL */ /* * Process the caught message. * * Syntax = (option value)... ?message? * * Bad message syntax causes a panic, because the other side uses * Tcl_GetReturnOptions and list construction functions to marshall the * information. Hence an error means that we've got serious breakage. */ res = Tcl_ListObjGetElements(NULL, msg, &lc, &lv); if (res != TCL_OK) { Tcl_Panic("Tcl_SetChannelError(Interp): Bad syntax of message"); } explicitResult = (1 == (lc % 2)); numOptions = lc - explicitResult; /* * No options, nothing to do. */ if (numOptions == 0) { return msg; } /* * Check for -code x, x != 1|error, and -level x, x != 0 */ for (i = 0; i < numOptions; i += 2) { if (0 == strcmp(TclGetString(lv[i]), "-code")) { /* * !"error", !integer, integer != 1 (numeric code for error) */ res = TclGetIntFromObj(NULL, lv[i+1], &val); if (((res == TCL_OK) && (val != 1)) || ((res != TCL_OK) && (0 != strcmp(TclGetString(lv[i+1]), "error")))) { newcode = 1; } } else if (0 == strcmp(TclGetString(lv[i]), "-level")) { /* * !integer, integer != 0 */ res = TclGetIntFromObj(NULL, lv [i+1], &val); if ((res != TCL_OK) || (val != 0)) { newlevel = 0; } } } /* * -code, -level are either not present or ok. Nothing to do. */ if ((newlevel < 0) && (newcode < 0)) { return msg; } lcn = numOptions; if (explicitResult) { lcn ++; } if (newlevel >= 0) { lcn += 2; } if (newcode >= 0) { lcn += 2; } lvn = (Tcl_Obj **) ckalloc(lcn * sizeof(Tcl_Obj *)); /* * New level/code information is spliced into the first occurence of * -level, -code, further occurences are ignored. The options cannot be * not present, we would not come here. Options which are ok are simply * copied over. */ lignore = cignore = 0; for (i=0, j=0; i= 0) { lvn[j++] = lv[i]; lvn[j++] = Tcl_NewIntObj(newlevel); newlevel = -1; lignore = 1; continue; } else if (lignore) { continue; } } else if (0 == strcmp(TclGetString(lv[i]), "-code")) { if (newcode >= 0) { lvn[j++] = lv[i]; lvn[j++] = Tcl_NewIntObj(newcode); newcode = -1; cignore = 1; continue; } else if (cignore) { continue; } } /* * Keep everything else, possibly copied down. */ lvn[j++] = lv[i]; lvn[j++] = lv[i+1]; } if (newlevel >= 0) { Tcl_Panic("Defined newlevel not used in rewrite"); } if (newcode >= 0) { Tcl_Panic("Defined newcode not used in rewrite"); } if (explicitResult) { lvn[j++] = lv[i]; } msg = Tcl_NewListObj(j, lvn); ckfree((char *) lvn); return msg; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelErrorInterp -- * * TIP #219, Tcl Channel Reflection API. * Return the message stored by the channel driver. * * Results: * Tcl error message object. * * Side effects: * Resets the stored data to NULL. * *---------------------------------------------------------------------- */ void Tcl_GetChannelErrorInterp( Tcl_Interp *interp, /* Interp to query. */ Tcl_Obj **msg) /* Place for error message. */ { Interp *iPtr = (Interp *) interp; *msg = iPtr->chanMsg; iPtr->chanMsg = NULL; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelError -- * * TIP #219, Tcl Channel Reflection API. * Return the message stored by the channel driver. * * Results: * Tcl error message object. * * Side effects: * Resets the stored data to NULL. * *---------------------------------------------------------------------- */ void Tcl_GetChannelError( Tcl_Channel chan, /* Channel to query. */ Tcl_Obj **msg) /* Place for error message. */ { ChannelState *statePtr = ((Channel *) chan)->state; *msg = statePtr->chanMsg; statePtr->chanMsg = NULL; } /* *---------------------------------------------------------------------- * * Tcl_ChannelTruncateProc -- * * TIP #208 (subsection relating to truncation, based on TIP #206). * Return the Tcl_DriverTruncateProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverTruncateProc * Tcl_ChannelTruncateProc( const Tcl_ChannelType *chanTypePtr) /* Pointer to channel type. */ { if (HaveVersion(chanTypePtr, TCL_CHANNEL_VERSION_5)) { return chanTypePtr->truncateProc; } else { return NULL; } } /* *---------------------------------------------------------------------- * * DupChannelIntRep -- * * Initialize the internal representation of a new Tcl_Obj to a copy of * the internal representation of an existing string object. * * Results: * None. * * Side effects: * copyPtr's internal rep is set to a copy of srcPtr's internal * representation. * *---------------------------------------------------------------------- */ static void DupChannelIntRep( register Tcl_Obj *srcPtr, /* Object with internal rep to copy. Must have * an internal rep of type "Channel". */ register Tcl_Obj *copyPtr) /* Object with internal rep to set. Must not * currently have an internal rep.*/ { ChannelState *statePtr = GET_CHANNELSTATE(srcPtr); Interp *interpPtr = GET_CHANNELINTERP(srcPtr); SET_CHANNELSTATE(copyPtr, statePtr); SET_CHANNELINTERP(copyPtr, interpPtr); Tcl_Preserve((ClientData) statePtr); copyPtr->typePtr = &tclChannelType; } /* *---------------------------------------------------------------------- * * SetChannelFromAny -- * * Create an internal representation of type "Channel" for an object. * * Results: * This operation always succeeds and returns TCL_OK. * * Side effects: * Any old internal reputation for objPtr is freed and the internal * representation is set to "Channel". * *---------------------------------------------------------------------- */ static int SetChannelFromAny( Tcl_Interp *interp, /* Used for error reporting if not NULL. */ register Tcl_Obj *objPtr) /* The object to convert. */ { ChannelState *statePtr; Interp *interpPtr; if (objPtr->typePtr == &tclChannelType) { /* * The channel is valid until any call to DetachChannel occurs. * Ensure consistency checks are done. */ statePtr = GET_CHANNELSTATE(objPtr); interpPtr = GET_CHANNELINTERP(objPtr); if (statePtr->flags & (CHANNEL_TAINTED|CHANNEL_CLOSED)) { ResetFlag(statePtr, CHANNEL_TAINTED); Tcl_Release((ClientData) statePtr); UpdateStringOfChannel(objPtr); objPtr->typePtr = NULL; } else if (interpPtr != (Interp*) interp) { Tcl_Release((ClientData) statePtr); UpdateStringOfChannel(objPtr); objPtr->typePtr = NULL; } } if (objPtr->typePtr != &tclChannelType) { Tcl_Channel chan; /* * We need a valid string with which to check for a valid channel, but * make sure not to free internal rep until validated. [Bug 1847044] */ if ((objPtr->typePtr != NULL) && (objPtr->bytes == NULL)) { objPtr->typePtr->updateStringProc(objPtr); } chan = Tcl_GetChannel(interp, objPtr->bytes, NULL); if (chan == NULL) { return TCL_ERROR; } TclFreeIntRep(objPtr); statePtr = ((Channel *)chan)->state; Tcl_Preserve((ClientData) statePtr); SET_CHANNELSTATE(objPtr, statePtr); SET_CHANNELINTERP(objPtr, interp); objPtr->typePtr = &tclChannelType; } return TCL_OK; } /* *---------------------------------------------------------------------- * * UpdateStringOfChannel -- * * Update the string representation for an object whose internal * representation is "Channel". * * Results: * None. * * Side effects: * The object's string may be set by converting its Unicode represention * to UTF format. * *---------------------------------------------------------------------- */ static void UpdateStringOfChannel( Tcl_Obj *objPtr) /* Object with string rep to update. */ { if (objPtr->bytes == NULL) { ChannelState *statePtr = GET_CHANNELSTATE(objPtr); const char *name = statePtr->channelName; if (name) { size_t len = strlen(name); objPtr->bytes = (char *) ckalloc(len + 1); objPtr->length = len; memcpy(objPtr->bytes, name, len); } else { objPtr->bytes = tclEmptyStringRep; objPtr->length = 0; } } } /* *---------------------------------------------------------------------- * * FreeChannelIntRep -- * * Release statePtr storage. * * Results: * None. * * Side effects: * May cause state to be freed. * *---------------------------------------------------------------------- */ static void FreeChannelIntRep( Tcl_Obj *objPtr) /* Object with internal rep to free. */ { Tcl_Release((ClientData) GET_CHANNELSTATE(objPtr)); } #if 0 /* * For future debugging work, a simple function to print the flags of a * channel in semi-readable form. */ static int DumpFlags( char *str, int flags) { char buf[20]; int i = 0; #define ChanFlag(chr,bit) (buf[i++] = ((flags & (bit)) ? (chr) : '_')) ChanFlag('r', TCL_READABLE); ChanFlag('w', TCL_WRITABLE); ChanFlag('n', CHANNEL_NONBLOCKING); ChanFlag('l', CHANNEL_LINEBUFFERED); ChanFlag('u', CHANNEL_UNBUFFERED); ChanFlag('R', BUFFER_READY); ChanFlag('F', BG_FLUSH_SCHEDULED); ChanFlag('c', CHANNEL_CLOSED); ChanFlag('E', CHANNEL_EOF); ChanFlag('S', CHANNEL_STICKY_EOF); ChanFlag('B', CHANNEL_BLOCKED); ChanFlag('/', INPUT_SAW_CR); ChanFlag('*', INPUT_NEED_NL); ChanFlag('D', CHANNEL_DEAD); ChanFlag('R', CHANNEL_RAW_MODE); #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING ChanFlag('T', CHANNEL_TIMER_FEV); ChanFlag('H', CHANNEL_HAS_MORE_DATA); #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ ChanFlag('x', CHANNEL_INCLOSE); buf[i] ='\0'; fprintf(stderr, "%s: %s\n", str, buf); return 0; } #endif /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */