/* * tclIO.c -- * * This file provides the generic portions (those that are the same on * all platforms and for all channel types) of Tcl's IO facilities. * * Copyright (c) 1998-2000 Ajuba Solutions * Copyright (c) 1995-1997 Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution * of this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tclIO.c,v 1.61.2.18 2006/02/15 16:04:27 dgp Exp $ */ #include "tclInt.h" #include "tclPort.h" #include "tclIO.h" #include /* * All static variables used in this file are collected into a single * instance of the following structure. For multi-threaded implementations, * there is one instance of this structure for each thread. * * Notice that different structures with the same name appear in other * files. The structure defined below is used in this file only. */ typedef struct ThreadSpecificData { /* * This variable holds the list of nested ChannelHandlerEventProc * invocations. */ NextChannelHandler *nestedHandlerPtr; /* * List of all channels currently open, indexed by ChannelState, * as only one ChannelState exists per set of stacked channels. */ ChannelState *firstCSPtr; #ifdef oldcode /* * Has a channel exit handler been created yet? */ int channelExitHandlerCreated; /* * Has the channel event source been created and registered with the * notifier? */ int channelEventSourceCreated; #endif /* * Static variables to hold channels for stdin, stdout and stderr. */ Tcl_Channel stdinChannel; int stdinInitialized; Tcl_Channel stdoutChannel; int stdoutInitialized; Tcl_Channel stderrChannel; int stderrInitialized; } ThreadSpecificData; static Tcl_ThreadDataKey dataKey; /* * Static functions in this file: */ static ChannelBuffer * AllocChannelBuffer _ANSI_ARGS_((int length)); static void ChannelTimerProc _ANSI_ARGS_(( ClientData clientData)); static int CheckChannelErrors _ANSI_ARGS_((ChannelState *statePtr, int direction)); static int CheckFlush _ANSI_ARGS_((Channel *chanPtr, ChannelBuffer *bufPtr, int newlineFlag)); static int CheckForDeadChannel _ANSI_ARGS_((Tcl_Interp *interp, ChannelState *statePtr)); static void CheckForStdChannelsBeingClosed _ANSI_ARGS_(( Tcl_Channel chan)); static void CleanupChannelHandlers _ANSI_ARGS_(( Tcl_Interp *interp, Channel *chanPtr)); static int CloseChannel _ANSI_ARGS_((Tcl_Interp *interp, Channel *chanPtr, int errorCode)); static void CommonGetsCleanup _ANSI_ARGS_((Channel *chanPtr, Tcl_Encoding encoding)); static int CopyAndTranslateBuffer _ANSI_ARGS_(( ChannelState *statePtr, char *result, int space)); static int CopyBuffer _ANSI_ARGS_(( Channel *chanPtr, char *result, int space)); static int CopyData _ANSI_ARGS_((CopyState *csPtr, int mask)); static void CopyEventProc _ANSI_ARGS_((ClientData clientData, int mask)); static void CreateScriptRecord _ANSI_ARGS_(( Tcl_Interp *interp, Channel *chanPtr, int mask, Tcl_Obj *scriptPtr)); static void DeleteChannelTable _ANSI_ARGS_(( ClientData clientData, Tcl_Interp *interp)); static void DeleteScriptRecord _ANSI_ARGS_((Tcl_Interp *interp, Channel *chanPtr, int mask)); static int DetachChannel _ANSI_ARGS_((Tcl_Interp *interp, Tcl_Channel chan)); static void DiscardInputQueued _ANSI_ARGS_((ChannelState *statePtr, int discardSavedBuffers)); static void DiscardOutputQueued _ANSI_ARGS_(( ChannelState *chanPtr)); static int DoRead _ANSI_ARGS_((Channel *chanPtr, char *srcPtr, int slen)); static int DoWrite _ANSI_ARGS_((Channel *chanPtr, CONST char *src, int srcLen)); static int DoReadChars _ANSI_ARGS_ ((Channel* chan, Tcl_Obj* objPtr, int toRead, int appendFlag)); static int DoWriteChars _ANSI_ARGS_ ((Channel* chan, CONST char* src, int len)); static int FilterInputBytes _ANSI_ARGS_((Channel *chanPtr, GetsState *statePtr)); static int FlushChannel _ANSI_ARGS_((Tcl_Interp *interp, Channel *chanPtr, int calledFromAsyncFlush)); static Tcl_HashTable * GetChannelTable _ANSI_ARGS_((Tcl_Interp *interp)); static int GetInput _ANSI_ARGS_((Channel *chanPtr)); static int HaveVersion _ANSI_ARGS_((Tcl_ChannelType *typePtr, Tcl_ChannelTypeVersion minimumVersion)); static void PeekAhead _ANSI_ARGS_((Channel *chanPtr, char **dstEndPtr, GetsState *gsPtr)); static int ReadBytes _ANSI_ARGS_((ChannelState *statePtr, Tcl_Obj *objPtr, int charsLeft, int *offsetPtr)); static int ReadChars _ANSI_ARGS_((ChannelState *statePtr, Tcl_Obj *objPtr, int charsLeft, int *offsetPtr, int *factorPtr)); static void RecycleBuffer _ANSI_ARGS_((ChannelState *statePtr, ChannelBuffer *bufPtr, int mustDiscard)); static int StackSetBlockMode _ANSI_ARGS_((Channel *chanPtr, int mode)); static int SetBlockMode _ANSI_ARGS_((Tcl_Interp *interp, Channel *chanPtr, int mode)); static void StopCopy _ANSI_ARGS_((CopyState *csPtr)); static int TranslateInputEOL _ANSI_ARGS_((ChannelState *statePtr, char *dst, CONST char *src, int *dstLenPtr, int *srcLenPtr)); static int TranslateOutputEOL _ANSI_ARGS_((ChannelState *statePtr, char *dst, CONST char *src, int *dstLenPtr, int *srcLenPtr)); static void UpdateInterest _ANSI_ARGS_((Channel *chanPtr)); static int WriteBytes _ANSI_ARGS_((Channel *chanPtr, CONST char *src, int srcLen)); static int WriteChars _ANSI_ARGS_((Channel *chanPtr, CONST char *src, int srcLen)); /* *--------------------------------------------------------------------------- * * TclInitIOSubsystem -- * * Initialize all resources used by this subsystem on a per-process * basis. * * Results: * None. * * Side effects: * Depends on the memory subsystems. * *--------------------------------------------------------------------------- */ void TclInitIOSubsystem() { /* * By fetching thread local storage we take care of * allocating it for each thread. */ (void) TCL_TSD_INIT(&dataKey); } /* *------------------------------------------------------------------------- * * TclFinalizeIOSubsystem -- * * Releases all resources used by this subsystem on a per-process * basis. Closes all extant channels that have not already been * closed because they were not owned by any interp. * * Results: * None. * * Side effects: * Depends on encoding and memory subsystems. * *------------------------------------------------------------------------- */ /* ARGSUSED */ void TclFinalizeIOSubsystem() { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); Channel *chanPtr; /* Iterates over open channels. */ ChannelState *nextCSPtr; /* Iterates over open channels. */ ChannelState *statePtr; /* state of channel stack */ for (statePtr = tsdPtr->firstCSPtr; statePtr != (ChannelState *) NULL; statePtr = nextCSPtr) { chanPtr = statePtr->topChanPtr; /* * Set the channel back into blocking mode to ensure that we wait * for all data to flush out. */ (void) Tcl_SetChannelOption(NULL, (Tcl_Channel) chanPtr, "-blocking", "on"); if ((chanPtr == (Channel *) tsdPtr->stdinChannel) || (chanPtr == (Channel *) tsdPtr->stdoutChannel) || (chanPtr == (Channel *) tsdPtr->stderrChannel)) { /* * Decrement the refcount which was earlier artificially bumped * up to keep the channel from being closed. */ statePtr->refCount--; } /* * Preserve statePtr from disappearing until we can get the * nextCSPtr below. */ Tcl_Preserve(statePtr); if (statePtr->refCount <= 0) { /* * Close it only if the refcount indicates that the channel is not * referenced from any interpreter. If it is, that interpreter will * close the channel when it gets destroyed. */ (void) Tcl_Close((Tcl_Interp *) NULL, (Tcl_Channel) chanPtr); } else { /* * The refcount is greater than zero, so flush the channel. */ Tcl_Flush((Tcl_Channel) chanPtr); /* * Call the device driver to actually close the underlying * device for this channel. */ if (chanPtr->typePtr->closeProc != TCL_CLOSE2PROC) { (chanPtr->typePtr->closeProc)(chanPtr->instanceData, (Tcl_Interp *) NULL); } else { (chanPtr->typePtr->close2Proc)(chanPtr->instanceData, (Tcl_Interp *) NULL, 0); } /* * Finally, we clean up the fields in the channel data structure * since all of them have been deleted already. We mark the * channel with CHANNEL_DEAD to prevent any further IO operations * on it. */ chanPtr->instanceData = (ClientData) NULL; statePtr->flags |= CHANNEL_DEAD; } /* * We look for the next pointer now in case we had one closed on up * during the current channel's closeproc (eg: rechan extension) */ nextCSPtr = statePtr->nextCSPtr; Tcl_Release(statePtr); } TclpFinalizePipes(); } /* *---------------------------------------------------------------------- * * Tcl_SetStdChannel -- * * This function is used to change the channels that are used * for stdin/stdout/stderr in new interpreters. * * Results: * None * * Side effects: * None. * *---------------------------------------------------------------------- */ void Tcl_SetStdChannel(channel, type) Tcl_Channel channel; int type; /* One of TCL_STDIN, TCL_STDOUT, TCL_STDERR. */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); switch (type) { case TCL_STDIN: tsdPtr->stdinInitialized = 1; tsdPtr->stdinChannel = channel; break; case TCL_STDOUT: tsdPtr->stdoutInitialized = 1; tsdPtr->stdoutChannel = channel; break; case TCL_STDERR: tsdPtr->stderrInitialized = 1; tsdPtr->stderrChannel = channel; break; } } /* *---------------------------------------------------------------------- * * Tcl_GetStdChannel -- * * Returns the specified standard channel. * * Results: * Returns the specified standard channel, or NULL. * * Side effects: * May cause the creation of a standard channel and the underlying * file. * *---------------------------------------------------------------------- */ Tcl_Channel Tcl_GetStdChannel(type) int type; /* One of TCL_STDIN, TCL_STDOUT, TCL_STDERR. */ { Tcl_Channel channel = NULL; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); /* * If the channels were not created yet, create them now and * store them in the static variables. */ switch (type) { case TCL_STDIN: if (!tsdPtr->stdinInitialized) { tsdPtr->stdinChannel = TclpGetDefaultStdChannel(TCL_STDIN); tsdPtr->stdinInitialized = 1; /* * Artificially bump the refcount to ensure that the channel * is only closed on exit. * * NOTE: Must only do this if stdinChannel is not NULL. It * can be NULL in situations where Tcl is unable to connect * to the standard input. */ if (tsdPtr->stdinChannel != (Tcl_Channel) NULL) { (void) Tcl_RegisterChannel((Tcl_Interp *) NULL, tsdPtr->stdinChannel); } } channel = tsdPtr->stdinChannel; break; case TCL_STDOUT: if (!tsdPtr->stdoutInitialized) { tsdPtr->stdoutChannel = TclpGetDefaultStdChannel(TCL_STDOUT); tsdPtr->stdoutInitialized = 1; if (tsdPtr->stdoutChannel != (Tcl_Channel) NULL) { (void) Tcl_RegisterChannel((Tcl_Interp *) NULL, tsdPtr->stdoutChannel); } } channel = tsdPtr->stdoutChannel; break; case TCL_STDERR: if (!tsdPtr->stderrInitialized) { tsdPtr->stderrChannel = TclpGetDefaultStdChannel(TCL_STDERR); tsdPtr->stderrInitialized = 1; if (tsdPtr->stderrChannel != (Tcl_Channel) NULL) { (void) Tcl_RegisterChannel((Tcl_Interp *) NULL, tsdPtr->stderrChannel); } } channel = tsdPtr->stderrChannel; break; } return channel; } /* *---------------------------------------------------------------------- * * Tcl_CreateCloseHandler * * Creates a close callback which will be called when the channel is * closed. * * Results: * None. * * Side effects: * Causes the callback to be called in the future when the channel * will be closed. * *---------------------------------------------------------------------- */ void Tcl_CreateCloseHandler(chan, proc, clientData) Tcl_Channel chan; /* The channel for which to create the * close callback. */ Tcl_CloseProc *proc; /* The callback routine to call when the * channel will be closed. */ ClientData clientData; /* Arbitrary data to pass to the * close callback. */ { ChannelState *statePtr; CloseCallback *cbPtr; statePtr = ((Channel *) chan)->state; cbPtr = (CloseCallback *) ckalloc((unsigned) sizeof(CloseCallback)); cbPtr->proc = proc; cbPtr->clientData = clientData; cbPtr->nextPtr = statePtr->closeCbPtr; statePtr->closeCbPtr = cbPtr; } /* *---------------------------------------------------------------------- * * Tcl_DeleteCloseHandler -- * * Removes a callback that would have been called on closing * the channel. If there is no matching callback then this * function has no effect. * * Results: * None. * * Side effects: * The callback will not be called in the future when the channel * is eventually closed. * *---------------------------------------------------------------------- */ void Tcl_DeleteCloseHandler(chan, proc, clientData) Tcl_Channel chan; /* The channel for which to cancel the * close callback. */ Tcl_CloseProc *proc; /* The procedure for the callback to * remove. */ ClientData clientData; /* The callback data for the callback * to remove. */ { ChannelState *statePtr; CloseCallback *cbPtr, *cbPrevPtr; statePtr = ((Channel *) chan)->state; for (cbPtr = statePtr->closeCbPtr, cbPrevPtr = (CloseCallback *) NULL; cbPtr != (CloseCallback *) NULL; cbPtr = cbPtr->nextPtr) { if ((cbPtr->proc == proc) && (cbPtr->clientData == clientData)) { if (cbPrevPtr == (CloseCallback *) NULL) { statePtr->closeCbPtr = cbPtr->nextPtr; } ckfree((char *) cbPtr); break; } else { cbPrevPtr = cbPtr; } } } /* *---------------------------------------------------------------------- * * GetChannelTable -- * * Gets and potentially initializes the channel table for an * interpreter. If it is initializing the table it also inserts * channels for stdin, stdout and stderr if the interpreter is * trusted. * * Results: * A pointer to the hash table created, for use by the caller. * * Side effects: * Initializes the channel table for an interpreter. May create * channels for stdin, stdout and stderr. * *---------------------------------------------------------------------- */ static Tcl_HashTable * GetChannelTable(interp) Tcl_Interp *interp; { Tcl_HashTable *hTblPtr; /* Hash table of channels. */ Tcl_Channel stdinChan, stdoutChan, stderrChan; hTblPtr = (Tcl_HashTable *) Tcl_GetAssocData(interp, "tclIO", NULL); if (hTblPtr == (Tcl_HashTable *) NULL) { hTblPtr = (Tcl_HashTable *) ckalloc((unsigned) sizeof(Tcl_HashTable)); Tcl_InitHashTable(hTblPtr, TCL_STRING_KEYS); (void) Tcl_SetAssocData(interp, "tclIO", (Tcl_InterpDeleteProc *) DeleteChannelTable, (ClientData) hTblPtr); /* * If the interpreter is trusted (not "safe"), insert channels * for stdin, stdout and stderr (possibly creating them in the * process). */ if (Tcl_IsSafe(interp) == 0) { stdinChan = Tcl_GetStdChannel(TCL_STDIN); if (stdinChan != NULL) { Tcl_RegisterChannel(interp, stdinChan); } stdoutChan = Tcl_GetStdChannel(TCL_STDOUT); if (stdoutChan != NULL) { Tcl_RegisterChannel(interp, stdoutChan); } stderrChan = Tcl_GetStdChannel(TCL_STDERR); if (stderrChan != NULL) { Tcl_RegisterChannel(interp, stderrChan); } } } return hTblPtr; } /* *---------------------------------------------------------------------- * * DeleteChannelTable -- * * Deletes the channel table for an interpreter, closing any open * channels whose refcount reaches zero. This procedure is invoked * when an interpreter is deleted, via the AssocData cleanup * mechanism. * * Results: * None. * * Side effects: * Deletes the hash table of channels. May close channels. May flush * output on closed channels. Removes any channeEvent handlers that were * registered in this interpreter. * *---------------------------------------------------------------------- */ static void DeleteChannelTable(clientData, interp) ClientData clientData; /* The per-interpreter data structure. */ Tcl_Interp *interp; /* The interpreter being deleted. */ { Tcl_HashTable *hTblPtr; /* The hash table. */ Tcl_HashSearch hSearch; /* Search variable. */ Tcl_HashEntry *hPtr; /* Search variable. */ Channel *chanPtr; /* Channel being deleted. */ ChannelState *statePtr; /* State of Channel being deleted. */ EventScriptRecord *sPtr, *prevPtr, *nextPtr; /* Variables to loop over all channel events * registered, to delete the ones that refer * to the interpreter being deleted. */ /* * Delete all the registered channels - this will close channels whose * refcount reaches zero. */ hTblPtr = (Tcl_HashTable *) clientData; for (hPtr = Tcl_FirstHashEntry(hTblPtr, &hSearch); hPtr != (Tcl_HashEntry *) NULL; hPtr = Tcl_FirstHashEntry(hTblPtr, &hSearch)) { chanPtr = (Channel *) Tcl_GetHashValue(hPtr); statePtr = chanPtr->state; /* * Remove any fileevents registered in this interpreter. */ for (sPtr = statePtr->scriptRecordPtr, prevPtr = (EventScriptRecord *) NULL; sPtr != (EventScriptRecord *) NULL; sPtr = nextPtr) { nextPtr = sPtr->nextPtr; if (sPtr->interp == interp) { if (prevPtr == (EventScriptRecord *) NULL) { statePtr->scriptRecordPtr = nextPtr; } else { prevPtr->nextPtr = nextPtr; } Tcl_DeleteChannelHandler((Tcl_Channel) chanPtr, TclChannelEventScriptInvoker, (ClientData) sPtr); Tcl_DecrRefCount(sPtr->scriptPtr); ckfree((char *) sPtr); } else { prevPtr = sPtr; } } /* * Cannot call Tcl_UnregisterChannel because that procedure calls * Tcl_GetAssocData to get the channel table, which might already * be inaccessible from the interpreter structure. Instead, we * emulate the behavior of Tcl_UnregisterChannel directly here. */ Tcl_DeleteHashEntry(hPtr); statePtr->refCount--; if (statePtr->refCount <= 0) { if (!(statePtr->flags & BG_FLUSH_SCHEDULED)) { (void) Tcl_Close(interp, (Tcl_Channel) chanPtr); } } } Tcl_DeleteHashTable(hTblPtr); ckfree((char *) hTblPtr); } /* *---------------------------------------------------------------------- * * CheckForStdChannelsBeingClosed -- * * Perform special handling for standard channels being closed. When * given a standard channel, if the refcount is now 1, it means that * the last reference to the standard channel is being explicitly * closed. Now bump the refcount artificially down to 0, to ensure the * normal handling of channels being closed will occur. Also reset the * static pointer to the channel to NULL, to avoid dangling references. * * Results: * None. * * Side effects: * Manipulates the refcount on standard channels. May smash the global * static pointer to a standard channel. * *---------------------------------------------------------------------- */ static void CheckForStdChannelsBeingClosed(chan) Tcl_Channel chan; { ChannelState *statePtr = ((Channel *) chan)->state; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if ((chan == tsdPtr->stdinChannel) && (tsdPtr->stdinInitialized)) { if (statePtr->refCount < 2) { statePtr->refCount = 0; tsdPtr->stdinChannel = NULL; return; } } else if ((chan == tsdPtr->stdoutChannel) && (tsdPtr->stdoutInitialized)) { if (statePtr->refCount < 2) { statePtr->refCount = 0; tsdPtr->stdoutChannel = NULL; return; } } else if ((chan == tsdPtr->stderrChannel) && (tsdPtr->stderrInitialized)) { if (statePtr->refCount < 2) { statePtr->refCount = 0; tsdPtr->stderrChannel = NULL; return; } } } /* *---------------------------------------------------------------------- * * Tcl_IsStandardChannel -- * * Test if the given channel is a standard channel. No attempt * is made to check if the channel or the standard channels * are initialized or otherwise valid. * * Results: * Returns 1 if true, 0 if false. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_IsStandardChannel(chan) Tcl_Channel chan; /* Channel to check. */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if ((chan == tsdPtr->stdinChannel) || (chan == tsdPtr->stdoutChannel) || (chan == tsdPtr->stderrChannel)) { return 1; } else { return 0; } } /* *---------------------------------------------------------------------- * * Tcl_RegisterChannel -- * * Adds an already-open channel to the channel table of an interpreter. * If the interpreter passed as argument is NULL, it only increments * the channel refCount. * * Results: * None. * * Side effects: * May increment the reference count of a channel. * *---------------------------------------------------------------------- */ void Tcl_RegisterChannel(interp, chan) Tcl_Interp *interp; /* Interpreter in which to add the channel. */ Tcl_Channel chan; /* The channel to add to this interpreter * channel table. */ { Tcl_HashTable *hTblPtr; /* Hash table of channels. */ Tcl_HashEntry *hPtr; /* Search variable. */ int new; /* Is the hash entry new or does it exist? */ Channel *chanPtr; /* The actual channel. */ ChannelState *statePtr; /* State of the actual channel. */ /* * Always (un)register bottom-most channel in the stack. This makes * management of the channel list easier because no manipulation is * necessary during (un)stack operation. */ chanPtr = ((Channel *) chan)->state->bottomChanPtr; statePtr = chanPtr->state; if (statePtr->channelName == (CONST char *) NULL) { panic("Tcl_RegisterChannel: channel without name"); } if (interp != (Tcl_Interp *) NULL) { hTblPtr = GetChannelTable(interp); hPtr = Tcl_CreateHashEntry(hTblPtr, statePtr->channelName, &new); if (new == 0) { if (chan == (Tcl_Channel) Tcl_GetHashValue(hPtr)) { return; } panic("Tcl_RegisterChannel: duplicate channel names"); } Tcl_SetHashValue(hPtr, (ClientData) chanPtr); } statePtr->refCount++; } /* *---------------------------------------------------------------------- * * Tcl_UnregisterChannel -- * * Deletes the hash entry for a channel associated with an interpreter. * If the interpreter given as argument is NULL, it only decrements the * reference count. (This all happens in the Tcl_DetachChannel helper * function). * * Finally, if the reference count of the channel drops to zero, * it is deleted. * * Results: * A standard Tcl result. * * Side effects: * Calls Tcl_DetachChannel which deletes the hash entry for a channel * associated with an interpreter. * * May delete the channel, which can have a variety of consequences, * especially if we are forced to close the channel. * *---------------------------------------------------------------------- */ int Tcl_UnregisterChannel(interp, chan) Tcl_Interp *interp; /* Interpreter in which channel is defined. */ Tcl_Channel chan; /* Channel to delete. */ { ChannelState *statePtr; /* State of the real channel. */ statePtr = ((Channel *) chan)->state->bottomChanPtr->state; if (statePtr->flags & CHANNEL_INCLOSE) { if (interp != (Tcl_Interp*) NULL) { Tcl_AppendResult(interp, "Illegal recursive call to close through close-handler of channel", (char *) NULL); } return TCL_ERROR; } if (DetachChannel(interp, chan) != TCL_OK) { return TCL_OK; } statePtr = ((Channel *) chan)->state->bottomChanPtr->state; /* * Perform special handling for standard channels being closed. If the * refCount is now 1 it means that the last reference to the standard * channel is being explicitly closed, so bump the refCount down * artificially to 0. This will ensure that the channel is actually * closed, below. Also set the static pointer to NULL for the channel. */ CheckForStdChannelsBeingClosed(chan); /* * If the refCount reached zero, close the actual channel. */ if (statePtr->refCount <= 0) { /* * Ensure that if there is another buffer, it gets flushed * whether or not we are doing a background flush. */ if ((statePtr->curOutPtr != NULL) && (statePtr->curOutPtr->nextAdded > statePtr->curOutPtr->nextRemoved)) { statePtr->flags |= BUFFER_READY; } Tcl_Preserve((ClientData)statePtr); if (!(statePtr->flags & BG_FLUSH_SCHEDULED)) { /* We don't want to re-enter Tcl_Close */ if (!(statePtr->flags & CHANNEL_CLOSED)) { if (Tcl_Close(interp, chan) != TCL_OK) { statePtr->flags |= CHANNEL_CLOSED; Tcl_Release((ClientData)statePtr); return TCL_ERROR; } } } statePtr->flags |= CHANNEL_CLOSED; Tcl_Release((ClientData)statePtr); } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_DetachChannel -- * * Deletes the hash entry for a channel associated with an interpreter. * If the interpreter given as argument is NULL, it only decrements the * reference count. Even if the ref count drops to zero, the * channel is NOT closed or cleaned up. This allows a channel to * be detached from an interpreter and left in the same state it * was in when it was originally returned by 'Tcl_OpenFileChannel', * for example. * * This function cannot be used on the standard channels, and * will return TCL_ERROR if that is attempted. * * This function should only be necessary for special purposes * in which you need to generate a pristine channel from one * that has already been used. All ordinary purposes will almost * always want to use Tcl_UnregisterChannel instead. * * Provided the channel is not attached to any other interpreter, * it can then be closed with Tcl_Close, rather than with * Tcl_UnregisterChannel. * * Results: * A standard Tcl result. If the channel is not currently registered * with the given interpreter, TCL_ERROR is returned, otherwise * TCL_OK. However no error messages are left in the interp's result. * * Side effects: * Deletes the hash entry for a channel associated with an * interpreter. * *---------------------------------------------------------------------- */ int Tcl_DetachChannel(interp, chan) Tcl_Interp *interp; /* Interpreter in which channel is defined. */ Tcl_Channel chan; /* Channel to delete. */ { if (Tcl_IsStandardChannel(chan)) { return TCL_ERROR; } return DetachChannel(interp, chan); } /* *---------------------------------------------------------------------- * * DetachChannel -- * * Deletes the hash entry for a channel associated with an interpreter. * If the interpreter given as argument is NULL, it only decrements the * reference count. Even if the ref count drops to zero, the * channel is NOT closed or cleaned up. This allows a channel to * be detached from an interpreter and left in the same state it * was in when it was originally returned by 'Tcl_OpenFileChannel', * for example. * * Results: * A standard Tcl result. If the channel is not currently registered * with the given interpreter, TCL_ERROR is returned, otherwise * TCL_OK. However no error messages are left in the interp's result. * * Side effects: * Deletes the hash entry for a channel associated with an * interpreter. * *---------------------------------------------------------------------- */ static int DetachChannel(interp, chan) Tcl_Interp *interp; /* Interpreter in which channel is defined. */ Tcl_Channel chan; /* Channel to delete. */ { Tcl_HashTable *hTblPtr; /* Hash table of channels. */ Tcl_HashEntry *hPtr; /* Search variable. */ Channel *chanPtr; /* The real IO channel. */ ChannelState *statePtr; /* State of the real channel. */ /* * Always (un)register bottom-most channel in the stack. This makes * management of the channel list easier because no manipulation is * necessary during (un)stack operation. */ chanPtr = ((Channel *) chan)->state->bottomChanPtr; statePtr = chanPtr->state; if (interp != (Tcl_Interp *) NULL) { hTblPtr = (Tcl_HashTable *) Tcl_GetAssocData(interp, "tclIO", NULL); if (hTblPtr == (Tcl_HashTable *) NULL) { return TCL_ERROR; } hPtr = Tcl_FindHashEntry(hTblPtr, statePtr->channelName); if (hPtr == (Tcl_HashEntry *) NULL) { return TCL_ERROR; } if ((Channel *) Tcl_GetHashValue(hPtr) != chanPtr) { return TCL_ERROR; } Tcl_DeleteHashEntry(hPtr); /* * Remove channel handlers that refer to this interpreter, so that they * will not be present if the actual close is delayed and more events * happen on the channel. This may occur if the channel is shared * between several interpreters, or if the channel has async * flushing active. */ CleanupChannelHandlers(interp, chanPtr); } statePtr->refCount--; return TCL_OK; } /* *--------------------------------------------------------------------------- * * Tcl_GetChannel -- * * Finds an existing Tcl_Channel structure by name in a given * interpreter. This function is public because it is used by * channel-type-specific functions. * * Results: * A Tcl_Channel or NULL on failure. If failed, interp's result * object contains an error message. *modePtr is filled with the * modes in which the channel was opened. * * Side effects: * None. * *--------------------------------------------------------------------------- */ Tcl_Channel Tcl_GetChannel(interp, chanName, modePtr) Tcl_Interp *interp; /* Interpreter in which to find or create * the channel. */ CONST char *chanName; /* The name of the channel. */ int *modePtr; /* Where to store the mode in which the * channel was opened? Will contain an ORed * combination of TCL_READABLE and * TCL_WRITABLE, if non-NULL. */ { Channel *chanPtr; /* The actual channel. */ Tcl_HashTable *hTblPtr; /* Hash table of channels. */ Tcl_HashEntry *hPtr; /* Search variable. */ CONST char *name; /* Translated name. */ /* * Substitute "stdin", etc. Note that even though we immediately * find the channel using Tcl_GetStdChannel, we still need to look * it up in the specified interpreter to ensure that it is present * in the channel table. Otherwise, safe interpreters would always * have access to the standard channels. */ name = chanName; if ((chanName[0] == 's') && (chanName[1] == 't')) { chanPtr = NULL; if (strcmp(chanName, "stdin") == 0) { chanPtr = (Channel *) Tcl_GetStdChannel(TCL_STDIN); } else if (strcmp(chanName, "stdout") == 0) { chanPtr = (Channel *) Tcl_GetStdChannel(TCL_STDOUT); } else if (strcmp(chanName, "stderr") == 0) { chanPtr = (Channel *) Tcl_GetStdChannel(TCL_STDERR); } if (chanPtr != NULL) { name = chanPtr->state->channelName; } } hTblPtr = GetChannelTable(interp); hPtr = Tcl_FindHashEntry(hTblPtr, name); if (hPtr == (Tcl_HashEntry *) NULL) { Tcl_AppendResult(interp, "can not find channel named \"", chanName, "\"", (char *) NULL); return NULL; } /* * Always return bottom-most channel in the stack. This one lives * the longest - other channels may go away unnoticed. * The other APIs compensate where necessary to retrieve the * topmost channel again. */ chanPtr = (Channel *) Tcl_GetHashValue(hPtr); chanPtr = chanPtr->state->bottomChanPtr; if (modePtr != NULL) { *modePtr = (chanPtr->state->flags & (TCL_READABLE|TCL_WRITABLE)); } return (Tcl_Channel) chanPtr; } /* *---------------------------------------------------------------------- * * Tcl_CreateChannel -- * * Creates a new entry in the hash table for a Tcl_Channel * record. * * Results: * Returns the new Tcl_Channel. * * Side effects: * Creates a new Tcl_Channel instance and inserts it into the * hash table. * *---------------------------------------------------------------------- */ Tcl_Channel Tcl_CreateChannel(typePtr, chanName, instanceData, mask) Tcl_ChannelType *typePtr; /* The channel type record. */ CONST char *chanName; /* Name of channel to record. */ ClientData instanceData; /* Instance specific data. */ int mask; /* TCL_READABLE & TCL_WRITABLE to indicate * if the channel is readable, writable. */ { Channel *chanPtr; /* The channel structure newly created. */ ChannelState *statePtr; /* The stack-level independent state info * for the channel. */ CONST char *name; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); /* * With the change of the Tcl_ChannelType structure to use a version in * 8.3.2+, we have to make sure that our assumption that the structure * remains a binary compatible size is true. * * If this assertion fails on some system, then it can be removed * only if the user recompiles code with older channel drivers in * the new system as well. */ assert(sizeof(Tcl_ChannelTypeVersion) == sizeof(Tcl_DriverBlockModeProc*)); /* * JH: We could subsequently memset these to 0 to avoid the * numerous assignments to 0/NULL below. */ chanPtr = (Channel *) ckalloc((unsigned) sizeof(Channel)); statePtr = (ChannelState *) ckalloc((unsigned) sizeof(ChannelState)); chanPtr->state = statePtr; chanPtr->instanceData = instanceData; chanPtr->typePtr = typePtr; /* * Set all the bits that are part of the stack-independent state * information for the channel. */ if (chanName != (char *) NULL) { char *tmp = ckalloc((unsigned) (strlen(chanName) + 1)); statePtr->channelName = tmp; strcpy(tmp, chanName); } else { panic("Tcl_CreateChannel: NULL channel name"); } statePtr->flags = mask; /* * Set the channel to system default encoding. */ statePtr->encoding = NULL; name = Tcl_GetEncodingName(NULL); if (strcmp(name, "binary") != 0) { statePtr->encoding = Tcl_GetEncoding(NULL, name); } statePtr->inputEncodingState = NULL; statePtr->inputEncodingFlags = TCL_ENCODING_START; statePtr->outputEncodingState = NULL; statePtr->outputEncodingFlags = TCL_ENCODING_START; /* * Set the channel up initially in AUTO input translation mode to * accept "\n", "\r" and "\r\n". Output translation mode is set to * a platform specific default value. The eofChar is set to 0 for both * input and output, so that Tcl does not look for an in-file EOF * indicator (e.g. ^Z) and does not append an EOF indicator to files. */ statePtr->inputTranslation = TCL_TRANSLATE_AUTO; statePtr->outputTranslation = TCL_PLATFORM_TRANSLATION; statePtr->inEofChar = 0; statePtr->outEofChar = 0; statePtr->unreportedError = 0; statePtr->refCount = 0; statePtr->closeCbPtr = (CloseCallback *) NULL; statePtr->curOutPtr = (ChannelBuffer *) NULL; statePtr->outQueueHead = (ChannelBuffer *) NULL; statePtr->outQueueTail = (ChannelBuffer *) NULL; statePtr->saveInBufPtr = (ChannelBuffer *) NULL; statePtr->inQueueHead = (ChannelBuffer *) NULL; statePtr->inQueueTail = (ChannelBuffer *) NULL; statePtr->chPtr = (ChannelHandler *) NULL; statePtr->interestMask = 0; statePtr->scriptRecordPtr = (EventScriptRecord *) NULL; statePtr->bufSize = CHANNELBUFFER_DEFAULT_SIZE; statePtr->timer = NULL; statePtr->csPtr = NULL; statePtr->outputStage = NULL; if ((statePtr->encoding != NULL) && (statePtr->flags & TCL_WRITABLE)) { statePtr->outputStage = (char *) ckalloc((unsigned) (statePtr->bufSize + 2)); } /* * As we are creating the channel, it is obviously the top for now */ statePtr->topChanPtr = chanPtr; statePtr->bottomChanPtr = chanPtr; chanPtr->downChanPtr = (Channel *) NULL; chanPtr->upChanPtr = (Channel *) NULL; chanPtr->inQueueHead = (ChannelBuffer*) NULL; chanPtr->inQueueTail = (ChannelBuffer*) NULL; /* * Link the channel into the list of all channels; create an on-exit * handler if there is not one already, to close off all the channels * in the list on exit. * * JH: Could call Tcl_SpliceChannel, but need to avoid NULL check. * * TIP #218. * AK: Just initialize the field to NULL before invoking Tcl_SpliceChannel * We need Tcl_SpliceChannel, for the threadAction calls. * There is no real reason to duplicate all of this. * NOTE: All drivers using thread actions now have to perform their TSD * manipulation only in their thread action proc. Doing it when * creating their instance structures will collide with the thread * action activity and lead to damaged lists. */ statePtr->nextCSPtr = (ChannelState *) NULL; Tcl_SpliceChannel ((Tcl_Channel) chanPtr); /* * Install this channel in the first empty standard channel slot, if * the channel was previously closed explicitly. */ if ((tsdPtr->stdinChannel == NULL) && (tsdPtr->stdinInitialized == 1)) { Tcl_SetStdChannel((Tcl_Channel) chanPtr, TCL_STDIN); Tcl_RegisterChannel((Tcl_Interp *) NULL, (Tcl_Channel) chanPtr); } else if ((tsdPtr->stdoutChannel == NULL) && (tsdPtr->stdoutInitialized == 1)) { Tcl_SetStdChannel((Tcl_Channel) chanPtr, TCL_STDOUT); Tcl_RegisterChannel((Tcl_Interp *) NULL, (Tcl_Channel) chanPtr); } else if ((tsdPtr->stderrChannel == NULL) && (tsdPtr->stderrInitialized == 1)) { Tcl_SetStdChannel((Tcl_Channel) chanPtr, TCL_STDERR); Tcl_RegisterChannel((Tcl_Interp *) NULL, (Tcl_Channel) chanPtr); } return (Tcl_Channel) chanPtr; } /* *---------------------------------------------------------------------- * * Tcl_StackChannel -- * * Replaces an entry in the hash table for a Tcl_Channel * record. The replacement is a new channel with same name, * it supercedes the replaced channel. Input and output of * the superceded channel is now going through the newly * created channel and allows the arbitrary filtering/manipulation * of the dataflow. * * Andreas Kupries , 12/13/1998 * "Trf-Patch for filtering channels" * * Results: * Returns the new Tcl_Channel, which actually contains the * saved information about prevChan. * * Side effects: * A new channel structure is allocated and linked below * the existing channel. The channel operations and client * data of the existing channel are copied down to the newly * created channel, and the current channel has its operations * replaced by the new typePtr. * *---------------------------------------------------------------------- */ Tcl_Channel Tcl_StackChannel(interp, typePtr, instanceData, mask, prevChan) Tcl_Interp *interp; /* The interpreter we are working in */ Tcl_ChannelType *typePtr; /* The channel type record for the new * channel. */ ClientData instanceData; /* Instance specific data for the new * channel. */ int mask; /* TCL_READABLE & TCL_WRITABLE to indicate * if the channel is readable, writable. */ Tcl_Channel prevChan; /* The channel structure to replace */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); Channel *chanPtr, *prevChanPtr; ChannelState *statePtr; /* * Find the given channel in the list of all channels. * If we don't find it, then it was never registered correctly. * * This operation should occur at the top of a channel stack. */ statePtr = (ChannelState *) tsdPtr->firstCSPtr; prevChanPtr = ((Channel *) prevChan)->state->topChanPtr; while (statePtr->topChanPtr != prevChanPtr) { statePtr = statePtr->nextCSPtr; } if (statePtr == NULL) { if (interp) { Tcl_AppendResult(interp, "couldn't find state for channel \"", Tcl_GetChannelName(prevChan), "\"", (char *) NULL); } return (Tcl_Channel) NULL; } /* * Here we check if the given "mask" matches the "flags" * of the already existing channel. * * | - | R | W | RW | * --+---+---+---+----+ <=> 0 != (chan->mask & prevChan->mask) * - | | | | | * R | | + | | + | The superceding channel is allowed to * W | | | + | + | restrict the capabilities of the * RW| | + | + | + | superceded one ! * --+---+---+---+----+ */ if ((mask & (statePtr->flags & (TCL_READABLE | TCL_WRITABLE))) == 0) { if (interp) { Tcl_AppendResult(interp, "reading and writing both disallowed for channel \"", Tcl_GetChannelName(prevChan), "\"", (char *) NULL); } return (Tcl_Channel) NULL; } /* * Flush the buffers. This ensures that any data still in them * at this time is not handled by the new transformation. Restrict * this to writable channels. Take care to hide a possible bg-copy * in progress from Tcl_Flush and the CheckForChannelErrors inside. */ if ((mask & TCL_WRITABLE) != 0) { CopyState *csPtr; csPtr = statePtr->csPtr; statePtr->csPtr = (CopyState*) NULL; if (Tcl_Flush((Tcl_Channel) prevChanPtr) != TCL_OK) { statePtr->csPtr = csPtr; if (interp) { Tcl_AppendResult(interp, "could not flush channel \"", Tcl_GetChannelName(prevChan), "\"", (char *) NULL); } return (Tcl_Channel) NULL; } statePtr->csPtr = csPtr; } /* * Discard any input in the buffers. They are not yet read by the * user of the channel, so they have to go through the new * transformation before reading. As the buffers contain the * untransformed form their contents are not only useless but actually * distorts our view of the system. * * To preserve the information without having to read them again and * to avoid problems with the location in the channel (seeking might * be impossible) we move the buffers from the common state structure * into the channel itself. We use the buffers in the channel below * the new transformation to hold the data. In the future this allows * us to write transformations which pre-read data and push the unused * part back when they are going away. */ if (((mask & TCL_READABLE) != 0) && (statePtr->inQueueHead != (ChannelBuffer*) NULL)) { /* * Remark: It is possible that the channel buffers contain data from * some earlier push-backs. */ statePtr->inQueueTail->nextPtr = prevChanPtr->inQueueHead; prevChanPtr->inQueueHead = statePtr->inQueueHead; if (prevChanPtr->inQueueTail == (ChannelBuffer*) NULL) { prevChanPtr->inQueueTail = statePtr->inQueueTail; } statePtr->inQueueHead = (ChannelBuffer*) NULL; statePtr->inQueueTail = (ChannelBuffer*) NULL; } chanPtr = (Channel *) ckalloc((unsigned) sizeof(Channel)); /* * Save some of the current state into the new structure, * reinitialize the parts which will stay with the transformation. * * Remarks: */ chanPtr->state = statePtr; chanPtr->instanceData = instanceData; chanPtr->typePtr = typePtr; chanPtr->downChanPtr = prevChanPtr; chanPtr->upChanPtr = (Channel *) NULL; chanPtr->inQueueHead = (ChannelBuffer*) NULL; chanPtr->inQueueTail = (ChannelBuffer*) NULL; /* * Place new block at the head of a possibly existing list of previously * stacked channels. */ prevChanPtr->upChanPtr = chanPtr; statePtr->topChanPtr = chanPtr; return (Tcl_Channel) chanPtr; } /* *---------------------------------------------------------------------- * * Tcl_UnstackChannel -- * * Unstacks an entry in the hash table for a Tcl_Channel * record. This is the reverse to 'Tcl_StackChannel'. * * Results: * A standard Tcl result. * * Side effects: * If TCL_ERROR is returned, the posix error code will be set * with Tcl_SetErrno. * *---------------------------------------------------------------------- */ int Tcl_UnstackChannel (interp, chan) Tcl_Interp *interp; /* The interpreter we are working in */ Tcl_Channel chan; /* The channel to unstack */ { Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; int result = 0; /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; if (chanPtr->downChanPtr != (Channel *) NULL) { /* * Instead of manipulating the per-thread / per-interp list/hashtable * of registered channels we wind down the state of the transformation, * and then restore the state of underlying channel into the old * structure. */ Channel *downChanPtr = chanPtr->downChanPtr; /* * Flush the buffers. This ensures that any data still in them * at this time _is_ handled by the transformation we are unstacking * right now. Restrict this to writable channels. Take care to hide * a possible bg-copy in progress from Tcl_Flush and the * CheckForChannelErrors inside. */ if (statePtr->flags & TCL_WRITABLE) { CopyState* csPtr; csPtr = statePtr->csPtr; statePtr->csPtr = (CopyState*) NULL; if (Tcl_Flush((Tcl_Channel) chanPtr) != TCL_OK) { statePtr->csPtr = csPtr; if (interp) { Tcl_AppendResult(interp, "could not flush channel \"", Tcl_GetChannelName((Tcl_Channel) chanPtr), "\"", (char *) NULL); } return TCL_ERROR; } statePtr->csPtr = csPtr; } /* * Anything in the input queue and the push-back buffers of * the transformation going away is transformed data, but not * yet read. As unstacking means that the caller does not want * to see transformed data any more we have to discard these * bytes. To avoid writing an analogue to 'DiscardInputQueued' * we move the information in the push back buffers to the * input queue and then call 'DiscardInputQueued' on that. */ if (((statePtr->flags & TCL_READABLE) != 0) && ((statePtr->inQueueHead != (ChannelBuffer*) NULL) || (chanPtr->inQueueHead != (ChannelBuffer*) NULL))) { if ((statePtr->inQueueHead != (ChannelBuffer*) NULL) && (chanPtr->inQueueHead != (ChannelBuffer*) NULL)) { statePtr->inQueueTail->nextPtr = chanPtr->inQueueHead; statePtr->inQueueTail = chanPtr->inQueueTail; statePtr->inQueueHead = statePtr->inQueueTail; } else if (chanPtr->inQueueHead != (ChannelBuffer*) NULL) { statePtr->inQueueHead = chanPtr->inQueueHead; statePtr->inQueueTail = chanPtr->inQueueTail; } chanPtr->inQueueHead = (ChannelBuffer*) NULL; chanPtr->inQueueTail = (ChannelBuffer*) NULL; DiscardInputQueued (statePtr, 0); } statePtr->topChanPtr = downChanPtr; downChanPtr->upChanPtr = (Channel *) NULL; /* * Leave this link intact for closeproc * chanPtr->downChanPtr = (Channel *) NULL; */ /* * Close and free the channel driver state. */ if (chanPtr->typePtr->closeProc != TCL_CLOSE2PROC) { result = (chanPtr->typePtr->closeProc)(chanPtr->instanceData, interp); } else { result = (chanPtr->typePtr->close2Proc)(chanPtr->instanceData, interp, 0); } chanPtr->typePtr = NULL; /* * AK: Tcl_NotifyChannel may hold a reference to this block of memory */ Tcl_EventuallyFree((ClientData) chanPtr, TCL_DYNAMIC); UpdateInterest(downChanPtr); if (result != 0) { Tcl_SetErrno(result); return TCL_ERROR; } } else { /* * This channel does not cover another one. * Simply do a close, if necessary. */ if (statePtr->refCount <= 0) { if (Tcl_Close(interp, chan) != TCL_OK) { return TCL_ERROR; } } } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_GetStackedChannel -- * * Determines whether the specified channel is stacked upon another. * * Results: * NULL if the channel is not stacked upon another one, or a reference * to the channel it is stacked upon. This reference can be used in * queries, but modification is not allowed. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Channel Tcl_GetStackedChannel(chan) Tcl_Channel chan; { Channel *chanPtr = (Channel *) chan; /* The actual channel. */ return (Tcl_Channel) chanPtr->downChanPtr; } /* *---------------------------------------------------------------------- * * Tcl_GetTopChannel -- * * Returns the top channel of a channel stack. * * Results: * NULL if the channel is not stacked upon another one, or a reference * to the channel it is stacked upon. This reference can be used in * queries, but modification is not allowed. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Channel Tcl_GetTopChannel(chan) Tcl_Channel chan; { Channel *chanPtr = (Channel *) chan; /* The actual channel. */ return (Tcl_Channel) chanPtr->state->topChanPtr; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelInstanceData -- * * Returns the client data associated with a channel. * * Results: * The client data. * * Side effects: * None. * *---------------------------------------------------------------------- */ ClientData Tcl_GetChannelInstanceData(chan) Tcl_Channel chan; /* Channel for which to return client data. */ { Channel *chanPtr = (Channel *) chan; /* The actual channel. */ return chanPtr->instanceData; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelThread -- * * Given a channel structure, returns the thread managing it. * TIP #10 * * Results: * Returns the id of the thread managing the channel. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_ThreadId Tcl_GetChannelThread(chan) Tcl_Channel chan; /* The channel to return managing thread for. */ { Channel *chanPtr = (Channel *) chan; /* The actual channel. */ return chanPtr->state->managingThread; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelType -- * * Given a channel structure, returns the channel type structure. * * Results: * Returns a pointer to the channel type structure. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_ChannelType * Tcl_GetChannelType(chan) Tcl_Channel chan; /* The channel to return type for. */ { Channel *chanPtr = (Channel *) chan; /* The actual channel. */ return chanPtr->typePtr; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelMode -- * * Computes a mask indicating whether the channel is open for * reading and writing. * * Results: * An OR-ed combination of TCL_READABLE and TCL_WRITABLE. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_GetChannelMode(chan) Tcl_Channel chan; /* The channel for which the mode is * being computed. */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of actual channel. */ return (statePtr->flags & (TCL_READABLE | TCL_WRITABLE)); } /* *---------------------------------------------------------------------- * * Tcl_GetChannelName -- * * Returns the string identifying the channel name. * * Results: * The string containing the channel name. This memory is * owned by the generic layer and should not be modified by * the caller. * * Side effects: * None. * *---------------------------------------------------------------------- */ CONST char * Tcl_GetChannelName(chan) Tcl_Channel chan; /* The channel for which to return the name. */ { ChannelState *statePtr; /* State of actual channel. */ statePtr = ((Channel *) chan)->state; return statePtr->channelName; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelHandle -- * * Returns an OS handle associated with a channel. * * Results: * Returns TCL_OK and places the handle in handlePtr, or returns * TCL_ERROR on failure. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_GetChannelHandle(chan, direction, handlePtr) Tcl_Channel chan; /* The channel to get file from. */ int direction; /* TCL_WRITABLE or TCL_READABLE. */ ClientData *handlePtr; /* Where to store handle */ { Channel *chanPtr; /* The actual channel. */ ClientData handle; int result; chanPtr = ((Channel *) chan)->state->bottomChanPtr; result = (chanPtr->typePtr->getHandleProc)(chanPtr->instanceData, direction, &handle); if (handlePtr) { *handlePtr = handle; } return result; } /* *--------------------------------------------------------------------------- * * AllocChannelBuffer -- * * A channel buffer has BUFFER_PADDING bytes extra at beginning to * hold any bytes of a native-encoding character that got split by * the end of the previous buffer and need to be moved to the * beginning of the next buffer to make a contiguous string so it * can be converted to UTF-8. * * A channel buffer has BUFFER_PADDING bytes extra at the end to * hold any bytes of a native-encoding character (generated from a * UTF-8 character) that overflow past the end of the buffer and * need to be moved to the next buffer. * * Results: * A newly allocated channel buffer. * * Side effects: * None. * *--------------------------------------------------------------------------- */ static ChannelBuffer * AllocChannelBuffer(length) int length; /* Desired length of channel buffer. */ { ChannelBuffer *bufPtr; int n; n = length + CHANNELBUFFER_HEADER_SIZE + BUFFER_PADDING + BUFFER_PADDING; bufPtr = (ChannelBuffer *) ckalloc((unsigned) n); bufPtr->nextAdded = BUFFER_PADDING; bufPtr->nextRemoved = BUFFER_PADDING; bufPtr->bufLength = length + BUFFER_PADDING; bufPtr->nextPtr = (ChannelBuffer *) NULL; return bufPtr; } /* *---------------------------------------------------------------------- * * RecycleBuffer -- * * Helper function to recycle input and output buffers. Ensures * that two input buffers are saved (one in the input queue and * another in the saveInBufPtr field) and that curOutPtr is set * to a buffer. Only if these conditions are met is the buffer * freed to the OS. * * Results: * None. * * Side effects: * May free a buffer to the OS. * *---------------------------------------------------------------------- */ static void RecycleBuffer(statePtr, bufPtr, mustDiscard) ChannelState *statePtr; /* ChannelState in which to recycle buffers. */ ChannelBuffer *bufPtr; /* The buffer to recycle. */ int mustDiscard; /* If nonzero, free the buffer to the * OS, always. */ { /* * Do we have to free the buffer to the OS? */ if (mustDiscard) { ckfree((char *) bufPtr); return; } /* * Only save buffers which are at least as big as the requested * buffersize for the channel. This is to honor dynamic changes * of the buffersize made by the user. */ if ((bufPtr->bufLength - BUFFER_PADDING) < statePtr->bufSize) { ckfree((char *) bufPtr); return; } /* * Only save buffers for the input queue if the channel is readable. */ if (statePtr->flags & TCL_READABLE) { if (statePtr->inQueueHead == (ChannelBuffer *) NULL) { statePtr->inQueueHead = bufPtr; statePtr->inQueueTail = bufPtr; goto keepit; } if (statePtr->saveInBufPtr == (ChannelBuffer *) NULL) { statePtr->saveInBufPtr = bufPtr; goto keepit; } } /* * Only save buffers for the output queue if the channel is writable. */ if (statePtr->flags & TCL_WRITABLE) { if (statePtr->curOutPtr == (ChannelBuffer *) NULL) { statePtr->curOutPtr = bufPtr; goto keepit; } } /* * If we reached this code we return the buffer to the OS. */ ckfree((char *) bufPtr); return; keepit: bufPtr->nextRemoved = BUFFER_PADDING; bufPtr->nextAdded = BUFFER_PADDING; bufPtr->nextPtr = (ChannelBuffer *) NULL; } /* *---------------------------------------------------------------------- * * DiscardOutputQueued -- * * Discards all output queued in the output queue of a channel. * * Results: * None. * * Side effects: * Recycles buffers. * *---------------------------------------------------------------------- */ static void DiscardOutputQueued(statePtr) ChannelState *statePtr; /* ChannelState for which to discard output. */ { ChannelBuffer *bufPtr; while (statePtr->outQueueHead != (ChannelBuffer *) NULL) { bufPtr = statePtr->outQueueHead; statePtr->outQueueHead = bufPtr->nextPtr; RecycleBuffer(statePtr, bufPtr, 0); } statePtr->outQueueHead = (ChannelBuffer *) NULL; statePtr->outQueueTail = (ChannelBuffer *) NULL; } /* *---------------------------------------------------------------------- * * CheckForDeadChannel -- * * This function checks is a given channel is Dead. * (A channel that has been closed but not yet deallocated.) * * Results: * True (1) if channel is Dead, False (0) if channel is Ok * * Side effects: * None * *---------------------------------------------------------------------- */ static int CheckForDeadChannel(interp, statePtr) Tcl_Interp *interp; /* For error reporting (can be NULL) */ ChannelState *statePtr; /* The channel state to check. */ { if (statePtr->flags & CHANNEL_DEAD) { Tcl_SetErrno(EINVAL); if (interp) { Tcl_AppendResult(interp, "unable to access channel: invalid channel", (char *) NULL); } return 1; } return 0; } /* *---------------------------------------------------------------------- * * FlushChannel -- * * This function flushes as much of the queued output as is possible * now. If calledFromAsyncFlush is nonzero, it is being called in an * event handler to flush channel output asynchronously. * * Results: * 0 if successful, else the error code that was returned by the * channel type operation. * * Side effects: * May produce output on a channel. May block indefinitely if the * channel is synchronous. May schedule an async flush on the channel. * May recycle memory for buffers in the output queue. * *---------------------------------------------------------------------- */ static int FlushChannel(interp, chanPtr, calledFromAsyncFlush) Tcl_Interp *interp; /* For error reporting during close. */ Channel *chanPtr; /* The channel to flush on. */ int calledFromAsyncFlush; /* If nonzero then we are being * called from an asynchronous * flush callback. */ { ChannelState *statePtr = chanPtr->state; /* State of the channel stack. */ ChannelBuffer *bufPtr; /* Iterates over buffered output * queue. */ int toWrite; /* Amount of output data in current * buffer available to be written. */ int written; /* Amount of output data actually * written in current round. */ int errorCode = 0; /* Stores POSIX error codes from * channel driver operations. */ int wroteSome = 0; /* Set to one if any data was * written to the driver. */ /* * Prevent writing on a dead channel -- a channel that has been closed * but not yet deallocated. This can occur if the exit handler for the * channel deallocation runs before all channels are deregistered in * all interpreters. */ if (CheckForDeadChannel(interp, statePtr)) return -1; /* * Loop over the queued buffers and attempt to flush as * much as possible of the queued output to the channel. */ while (1) { /* * If the queue is empty and there is a ready current buffer, OR if * the current buffer is full, then move the current buffer to the * queue. */ if (((statePtr->curOutPtr != (ChannelBuffer *) NULL) && (statePtr->curOutPtr->nextAdded == statePtr->curOutPtr->bufLength)) || ((statePtr->flags & BUFFER_READY) && (statePtr->outQueueHead == (ChannelBuffer *) NULL))) { statePtr->flags &= (~(BUFFER_READY)); statePtr->curOutPtr->nextPtr = (ChannelBuffer *) NULL; if (statePtr->outQueueHead == (ChannelBuffer *) NULL) { statePtr->outQueueHead = statePtr->curOutPtr; } else { statePtr->outQueueTail->nextPtr = statePtr->curOutPtr; } statePtr->outQueueTail = statePtr->curOutPtr; statePtr->curOutPtr = (ChannelBuffer *) NULL; } bufPtr = statePtr->outQueueHead; /* * If we are not being called from an async flush and an async * flush is active, we just return without producing any output. */ if ((!calledFromAsyncFlush) && (statePtr->flags & BG_FLUSH_SCHEDULED)) { return 0; } /* * If the output queue is still empty, break out of the while loop. */ if (bufPtr == (ChannelBuffer *) NULL) { break; /* Out of the "while (1)". */ } /* * Produce the output on the channel. */ toWrite = bufPtr->nextAdded - bufPtr->nextRemoved; written = (chanPtr->typePtr->outputProc) (chanPtr->instanceData, bufPtr->buf + bufPtr->nextRemoved, toWrite, &errorCode); /* * If the write failed completely attempt to start the asynchronous * flush mechanism and break out of this loop - do not attempt to * write any more output at this time. */ if (written < 0) { /* * If the last attempt to write was interrupted, simply retry. */ if (errorCode == EINTR) { errorCode = 0; continue; } /* * If the channel is non-blocking and we would have blocked, * start a background flushing handler and break out of the loop. */ if ((errorCode == EWOULDBLOCK) || (errorCode == EAGAIN)) { /* * This used to check for CHANNEL_NONBLOCKING, and panic * if the channel was blocking. However, it appears * that setting stdin to -blocking 0 has some effect on * the stdout when it's a tty channel (dup'ed underneath) */ if (!(statePtr->flags & BG_FLUSH_SCHEDULED)) { statePtr->flags |= BG_FLUSH_SCHEDULED; UpdateInterest(chanPtr); } errorCode = 0; break; } /* * Decide whether to report the error upwards or defer it. */ if (calledFromAsyncFlush) { if (statePtr->unreportedError == 0) { statePtr->unreportedError = errorCode; } } else { Tcl_SetErrno(errorCode); if (interp != NULL) { /* * Casting away CONST here is safe because the * TCL_VOLATILE flag guarantees CONST treatment * of the Posix error string. */ Tcl_SetResult(interp, (char *) Tcl_PosixError(interp), TCL_VOLATILE); } } /* * When we get an error we throw away all the output * currently queued. */ DiscardOutputQueued(statePtr); continue; } else { wroteSome = 1; } bufPtr->nextRemoved += written; /* * If this buffer is now empty, recycle it. */ if (bufPtr->nextRemoved == bufPtr->nextAdded) { statePtr->outQueueHead = bufPtr->nextPtr; if (statePtr->outQueueHead == (ChannelBuffer *) NULL) { statePtr->outQueueTail = (ChannelBuffer *) NULL; } RecycleBuffer(statePtr, bufPtr, 0); } } /* Closes "while (1)". */ /* * If we wrote some data while flushing in the background, we are done. * We can't finish the background flush until we run out of data and * the channel becomes writable again. This ensures that all of the * pending data has been flushed at the system level. */ if (statePtr->flags & BG_FLUSH_SCHEDULED) { if (wroteSome) { return errorCode; } else if (statePtr->outQueueHead == (ChannelBuffer *) NULL) { statePtr->flags &= (~(BG_FLUSH_SCHEDULED)); (chanPtr->typePtr->watchProc)(chanPtr->instanceData, statePtr->interestMask); } } /* * If the channel is flagged as closed, delete it when the refCount * drops to zero, the output queue is empty and there is no output * in the current output buffer. */ if ((statePtr->flags & CHANNEL_CLOSED) && (statePtr->refCount <= 0) && (statePtr->outQueueHead == (ChannelBuffer *) NULL) && ((statePtr->curOutPtr == (ChannelBuffer *) NULL) || (statePtr->curOutPtr->nextAdded == statePtr->curOutPtr->nextRemoved))) { return CloseChannel(interp, chanPtr, errorCode); } return errorCode; } /* *---------------------------------------------------------------------- * * CloseChannel -- * * Utility procedure to close a channel and free associated resources. * * If the channel was stacked, then the it will copy the necessary * elements of the NEXT channel into the TOP channel, in essence * unstacking the channel. The NEXT channel will then be freed. * * If the channel was not stacked, then we will free all the bits * for the TOP channel, including the data structure itself. * * Results: * 1 if the channel was stacked, 0 otherwise. * * Side effects: * May close the actual channel; may free memory. * May change the value of errno. * *---------------------------------------------------------------------- */ static int CloseChannel(interp, chanPtr, errorCode) Tcl_Interp *interp; /* For error reporting. */ Channel *chanPtr; /* The channel to close. */ int errorCode; /* Status of operation so far. */ { int result = 0; /* Of calling driver close * operation. */ ChannelState *statePtr; /* state of the channel stack. */ ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); if (chanPtr == NULL) { return result; } statePtr = chanPtr->state; /* * No more input can be consumed so discard any leftover input. */ DiscardInputQueued(statePtr, 1); /* * Discard a leftover buffer in the current output buffer field. */ if (statePtr->curOutPtr != (ChannelBuffer *) NULL) { ckfree((char *) statePtr->curOutPtr); statePtr->curOutPtr = (ChannelBuffer *) NULL; } /* * The caller guarantees that there are no more buffers * queued for output. */ if (statePtr->outQueueHead != (ChannelBuffer *) NULL) { panic("TclFlush, closed channel: queued output left"); } /* * If the EOF character is set in the channel, append that to the * output device. */ if ((statePtr->outEofChar != 0) && (statePtr->flags & TCL_WRITABLE)) { int dummy; char c; c = (char) statePtr->outEofChar; (chanPtr->typePtr->outputProc) (chanPtr->instanceData, &c, 1, &dummy); } /* * Remove this channel from of the list of all channels. */ Tcl_CutChannel((Tcl_Channel) chanPtr); /* * Close and free the channel driver state. */ if (chanPtr->typePtr->closeProc != TCL_CLOSE2PROC) { result = (chanPtr->typePtr->closeProc)(chanPtr->instanceData, interp); } else { result = (chanPtr->typePtr->close2Proc)(chanPtr->instanceData, interp, 0); } /* * Some resources can be cleared only if the bottom channel * in a stack is closed. All the other channels in the stack * are not allowed to remove. */ if (chanPtr == statePtr->bottomChanPtr) { if (statePtr->channelName != (char *) NULL) { ckfree((char *) statePtr->channelName); statePtr->channelName = NULL; } Tcl_FreeEncoding(statePtr->encoding); if (statePtr->outputStage != NULL) { ckfree((char *) statePtr->outputStage); statePtr->outputStage = (char *) NULL; } } /* * If we are being called synchronously, report either * any latent error on the channel or the current error. */ if (statePtr->unreportedError != 0) { errorCode = statePtr->unreportedError; } if (errorCode == 0) { errorCode = result; if (errorCode != 0) { Tcl_SetErrno(errorCode); } } /* * Cancel any outstanding timer. */ Tcl_DeleteTimerHandler(statePtr->timer); /* * Mark the channel as deleted by clearing the type structure. */ if (chanPtr->downChanPtr != (Channel *) NULL) { Channel *downChanPtr = chanPtr->downChanPtr; statePtr->nextCSPtr = tsdPtr->firstCSPtr; tsdPtr->firstCSPtr = statePtr; statePtr->topChanPtr = downChanPtr; downChanPtr->upChanPtr = (Channel *) NULL; chanPtr->typePtr = NULL; Tcl_EventuallyFree((ClientData) chanPtr, TCL_DYNAMIC); return Tcl_Close(interp, (Tcl_Channel) downChanPtr); } /* * There is only the TOP Channel, so we free the remaining * pointers we have and then ourselves. Since this is the * last of the channels in the stack, make sure to free the * ChannelState structure associated with it. We use * Tcl_EventuallyFree to allow for any last */ chanPtr->typePtr = NULL; Tcl_EventuallyFree((ClientData) statePtr, TCL_DYNAMIC); Tcl_EventuallyFree((ClientData) chanPtr, TCL_DYNAMIC); return errorCode; } /* *---------------------------------------------------------------------- * * Tcl_CutChannel -- * * Removes a channel from the (thread-)global list of all channels * (in that thread). This is actually the statePtr for the stack * of channel. * * Results: * Nothing. * * Side effects: * Resets the field 'nextCSPtr' of the specified channel state to NULL. * * NOTE: * The channel to cut out of the list must not be referenced * in any interpreter. This is something this procedure cannot * check (despite the refcount) because the caller usually wants * fiddle with the channel (like transfering it to a different * thread) and thus keeps the refcount artifically high to prevent * its destruction. * *---------------------------------------------------------------------- */ void Tcl_CutChannel(chan) Tcl_Channel chan; /* The channel being removed. Must * not be referenced in any * interpreter. */ { ThreadSpecificData* tsdPtr = TCL_TSD_INIT(&dataKey); ChannelState *prevCSPtr; /* Preceding channel state in list of * all states - used to splice a * channel out of the list on close. */ ChannelState *statePtr = ((Channel *) chan)->state; /* state of the channel stack. */ Tcl_DriverThreadActionProc *threadActionProc; /* * Remove this channel from of the list of all channels * (in the current thread). */ if (tsdPtr->firstCSPtr && (statePtr == tsdPtr->firstCSPtr)) { tsdPtr->firstCSPtr = statePtr->nextCSPtr; } else { for (prevCSPtr = tsdPtr->firstCSPtr; prevCSPtr && (prevCSPtr->nextCSPtr != statePtr); prevCSPtr = prevCSPtr->nextCSPtr) { /* Empty loop body. */ } if (prevCSPtr == (ChannelState *) NULL) { panic("FlushChannel: damaged channel list"); } prevCSPtr->nextCSPtr = statePtr->nextCSPtr; } statePtr->nextCSPtr = (ChannelState *) NULL; /* TIP #218, Channel Thread Actions */ threadActionProc = Tcl_ChannelThreadActionProc (Tcl_GetChannelType (chan)); if (threadActionProc != NULL) { (*threadActionProc) (Tcl_GetChannelInstanceData(chan), TCL_CHANNEL_THREAD_REMOVE); } } /* *---------------------------------------------------------------------- * * Tcl_SpliceChannel -- * * Adds a channel to the (thread-)global list of all channels * (in that thread). Expects that the field 'nextChanPtr' in * the channel is set to NULL. * * Results: * Nothing. * * Side effects: * Nothing. * * NOTE: * The channel to splice into the list must not be referenced in any * interpreter. This is something this procedure cannot check * (despite the refcount) because the caller usually wants figgle * with the channel (like transfering it to a different thread) * and thus keeps the refcount artifically high to prevent its * destruction. * *---------------------------------------------------------------------- */ void Tcl_SpliceChannel(chan) Tcl_Channel chan; /* The channel being added. Must * not be referenced in any * interpreter. */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); ChannelState *statePtr = ((Channel *) chan)->state; Tcl_DriverThreadActionProc *threadActionProc; if (statePtr->nextCSPtr != (ChannelState *) NULL) { panic("Tcl_SpliceChannel: trying to add channel used in different list"); } statePtr->nextCSPtr = tsdPtr->firstCSPtr; tsdPtr->firstCSPtr = statePtr; /* * TIP #10. Mark the current thread as the new one managing this * channel. Note: 'Tcl_GetCurrentThread' returns sensible * values even for a non-threaded core. */ statePtr->managingThread = Tcl_GetCurrentThread (); /* TIP #218, Channel Thread Actions */ threadActionProc = Tcl_ChannelThreadActionProc (Tcl_GetChannelType (chan)); if (threadActionProc != NULL) { (*threadActionProc) (Tcl_GetChannelInstanceData(chan), TCL_CHANNEL_THREAD_INSERT); } } /* *---------------------------------------------------------------------- * * Tcl_Close -- * * Closes a channel. * * Results: * A standard Tcl result. * * Side effects: * Closes the channel if this is the last reference. * * NOTE: * Tcl_Close removes the channel as far as the user is concerned. * However, it may continue to exist for a while longer if it has * a background flush scheduled. The device itself is eventually * closed and the channel record removed, in CloseChannel, above. * *---------------------------------------------------------------------- */ /* ARGSUSED */ int Tcl_Close(interp, chan) Tcl_Interp *interp; /* Interpreter for errors. */ Tcl_Channel chan; /* The channel being closed. Must * not be referenced in any * interpreter. */ { CloseCallback *cbPtr; /* Iterate over close callbacks * for this channel. */ Channel *chanPtr; /* The real IO channel. */ ChannelState *statePtr; /* State of real IO channel. */ int result; /* Of calling FlushChannel. */ if (chan == (Tcl_Channel) NULL) { return TCL_OK; } /* * Perform special handling for standard channels being closed. If the * refCount is now 1 it means that the last reference to the standard * channel is being explicitly closed, so bump the refCount down * artificially to 0. This will ensure that the channel is actually * closed, below. Also set the static pointer to NULL for the channel. */ CheckForStdChannelsBeingClosed(chan); /* * This operation should occur at the top of a channel stack. */ chanPtr = (Channel *) chan; statePtr = chanPtr->state; chanPtr = statePtr->topChanPtr; if (statePtr->refCount > 0) { panic("called Tcl_Close on channel with refCount > 0"); } if (statePtr->flags & CHANNEL_INCLOSE) { if (interp) { Tcl_AppendResult(interp, "Illegal recursive call to close through close-handler of channel", (char *) NULL); } return TCL_ERROR; } statePtr->flags |= CHANNEL_INCLOSE; /* * When the channel has an escape sequence driven encoding such as * iso2022, the terminated escape sequence must write to the buffer. */ if ((statePtr->encoding != NULL) && (statePtr->curOutPtr != NULL) && (CheckChannelErrors(statePtr, TCL_WRITABLE) == 0)) { statePtr->outputEncodingFlags |= TCL_ENCODING_END; WriteChars(chanPtr, "", 0); } Tcl_ClearChannelHandlers(chan); /* * Invoke the registered close callbacks and delete their records. */ while (statePtr->closeCbPtr != (CloseCallback *) NULL) { cbPtr = statePtr->closeCbPtr; statePtr->closeCbPtr = cbPtr->nextPtr; (cbPtr->proc) (cbPtr->clientData); ckfree((char *) cbPtr); } statePtr->flags &= ~CHANNEL_INCLOSE; /* * Ensure that the last output buffer will be flushed. */ if ((statePtr->curOutPtr != (ChannelBuffer *) NULL) && (statePtr->curOutPtr->nextAdded > statePtr->curOutPtr->nextRemoved)) { statePtr->flags |= BUFFER_READY; } /* * If this channel supports it, close the read side, since we don't need it * anymore and this will help avoid deadlocks on some channel types. */ if (chanPtr->typePtr->closeProc == TCL_CLOSE2PROC) { result = (chanPtr->typePtr->close2Proc)(chanPtr->instanceData, interp, TCL_CLOSE_READ); } else { result = 0; } /* * The call to FlushChannel will flush any queued output and invoke * the close function of the channel driver, or it will set up the * channel to be flushed and closed asynchronously. */ statePtr->flags |= CHANNEL_CLOSED; if ((FlushChannel(interp, chanPtr, 0) != 0) || (result != 0)) { return TCL_ERROR; } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_ClearChannelHandlers -- * * Removes all channel handlers and event scripts from the channel, * cancels all background copies involving the channel and any interest * in events. * * Results: * None. * * Side effects: * See above. Deallocates memory. * *---------------------------------------------------------------------- */ void Tcl_ClearChannelHandlers (channel) Tcl_Channel channel; { ChannelHandler *chPtr, *chNext; /* Iterate over channel handlers. */ EventScriptRecord *ePtr, *eNextPtr; /* Iterate over eventscript records. */ Channel *chanPtr; /* The real IO channel. */ ChannelState *statePtr; /* State of real IO channel. */ ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); NextChannelHandler *nhPtr; /* * This operation should occur at the top of a channel stack. */ chanPtr = (Channel *) channel; statePtr = chanPtr->state; chanPtr = statePtr->topChanPtr; /* * Cancel any outstanding timer. */ Tcl_DeleteTimerHandler(statePtr->timer); /* * Remove any references to channel handlers for this channel that * may be about to be invoked. */ for (nhPtr = tsdPtr->nestedHandlerPtr; nhPtr != (NextChannelHandler *) NULL; nhPtr = nhPtr->nestedHandlerPtr) { if (nhPtr->nextHandlerPtr && (nhPtr->nextHandlerPtr->chanPtr == chanPtr)) { nhPtr->nextHandlerPtr = NULL; } } /* * Remove all the channel handler records attached to the channel * itself. */ for (chPtr = statePtr->chPtr; chPtr != (ChannelHandler *) NULL; chPtr = chNext) { chNext = chPtr->nextPtr; ckfree((char *) chPtr); } statePtr->chPtr = (ChannelHandler *) NULL; /* * Cancel any pending copy operation. */ StopCopy(statePtr->csPtr); /* * Must set the interest mask now to 0, otherwise infinite loops * will occur if Tcl_DoOneEvent is called before the channel is * finally deleted in FlushChannel. This can happen if the channel * has a background flush active. */ statePtr->interestMask = 0; /* * Remove any EventScript records for this channel. */ for (ePtr = statePtr->scriptRecordPtr; ePtr != (EventScriptRecord *) NULL; ePtr = eNextPtr) { eNextPtr = ePtr->nextPtr; Tcl_DecrRefCount(ePtr->scriptPtr); ckfree((char *) ePtr); } statePtr->scriptRecordPtr = (EventScriptRecord *) NULL; } /* *---------------------------------------------------------------------- * * Tcl_Write -- * * Puts a sequence of bytes into an output buffer, may queue the * buffer for output if it gets full, and also remembers whether the * current buffer is ready e.g. if it contains a newline and we are in * line buffering mode. Compensates stacking, i.e. will redirect the * data from the specified channel to the topmost channel in a stack. * * No encoding conversions are applied to the bytes being read. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ int Tcl_Write(chan, src, srcLen) Tcl_Channel chan; /* The channel to buffer output for. */ CONST char *src; /* Data to queue in output buffer. */ int srcLen; /* Length of data in bytes, or < 0 for * strlen(). */ { /* * Always use the topmost channel of the stack */ Channel *chanPtr; ChannelState *statePtr; /* state info for channel */ statePtr = ((Channel *) chan)->state; chanPtr = statePtr->topChanPtr; if (CheckChannelErrors(statePtr, TCL_WRITABLE) != 0) { return -1; } if (srcLen < 0) { srcLen = strlen(src); } return DoWrite(chanPtr, src, srcLen); } /* *---------------------------------------------------------------------- * * Tcl_WriteRaw -- * * Puts a sequence of bytes into an output buffer, may queue the * buffer for output if it gets full, and also remembers whether the * current buffer is ready e.g. if it contains a newline and we are in * line buffering mode. Writes directly to the driver of the channel, * does not compensate for stacking. * * No encoding conversions are applied to the bytes being read. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ int Tcl_WriteRaw(chan, src, srcLen) Tcl_Channel chan; /* The channel to buffer output for. */ CONST char *src; /* Data to queue in output buffer. */ int srcLen; /* Length of data in bytes, or < 0 for * strlen(). */ { Channel *chanPtr = ((Channel *) chan); ChannelState *statePtr = chanPtr->state; /* state info for channel */ int errorCode, written; if (CheckChannelErrors(statePtr, TCL_WRITABLE | CHANNEL_RAW_MODE) != 0) { return -1; } if (srcLen < 0) { srcLen = strlen(src); } /* * Go immediately to the driver, do all the error handling by ourselves. * The code was stolen from 'FlushChannel'. */ written = (chanPtr->typePtr->outputProc) (chanPtr->instanceData, src, srcLen, &errorCode); if (written < 0) { Tcl_SetErrno(errorCode); } return written; } /* *--------------------------------------------------------------------------- * * Tcl_WriteChars -- * * Takes a sequence of UTF-8 characters and converts them for output * using the channel's current encoding, may queue the buffer for * output if it gets full, and also remembers whether the current * buffer is ready e.g. if it contains a newline and we are in * line buffering mode. Compensates stacking, i.e. will redirect the * data from the specified channel to the topmost channel in a stack. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ int Tcl_WriteChars(chan, src, len) Tcl_Channel chan; /* The channel to buffer output for. */ CONST char *src; /* UTF-8 characters to queue in output buffer. */ int len; /* Length of string in bytes, or < 0 for * strlen(). */ { ChannelState *statePtr; /* state info for channel */ statePtr = ((Channel *) chan)->state; if (CheckChannelErrors(statePtr, TCL_WRITABLE) != 0) { return -1; } return DoWriteChars ((Channel*) chan, src, len); } /* *--------------------------------------------------------------------------- * * DoWriteChars -- * * Takes a sequence of UTF-8 characters and converts them for output * using the channel's current encoding, may queue the buffer for * output if it gets full, and also remembers whether the current * buffer is ready e.g. if it contains a newline and we are in * line buffering mode. Compensates stacking, i.e. will redirect the * data from the specified channel to the topmost channel in a stack. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ static int DoWriteChars(chanPtr, src, len) Channel* chanPtr; /* The channel to buffer output for. */ CONST char *src; /* UTF-8 characters to queue in output buffer. */ int len; /* Length of string in bytes, or < 0 for * strlen(). */ { /* * Always use the topmost channel of the stack */ ChannelState *statePtr; /* state info for channel */ statePtr = chanPtr->state; chanPtr = statePtr->topChanPtr; if (len < 0) { len = strlen(src); } if (statePtr->encoding == NULL) { /* * Inefficient way to convert UTF-8 to byte-array, but the * code parallels the way it is done for objects. */ Tcl_Obj *objPtr; int result; objPtr = Tcl_NewStringObj(src, len); src = (char *) Tcl_GetByteArrayFromObj(objPtr, &len); result = WriteBytes(chanPtr, src, len); Tcl_DecrRefCount(objPtr); return result; } return WriteChars(chanPtr, src, len); } /* *--------------------------------------------------------------------------- * * Tcl_WriteObj -- * * Takes the Tcl object and queues its contents for output. If the * encoding of the channel is NULL, takes the byte-array representation * of the object and queues those bytes for output. Otherwise, takes * the characters in the UTF-8 (string) representation of the object * and converts them for output using the channel's current encoding. * May flush internal buffers to output if one becomes full or is ready * for some other reason, e.g. if it contains a newline and the channel * is in line buffering mode. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno() will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ int Tcl_WriteObj(chan, objPtr) Tcl_Channel chan; /* The channel to buffer output for. */ Tcl_Obj *objPtr; /* The object to write. */ { /* * Always use the topmost channel of the stack */ Channel *chanPtr; ChannelState *statePtr; /* state info for channel */ char *src; int srcLen; statePtr = ((Channel *) chan)->state; chanPtr = statePtr->topChanPtr; if (CheckChannelErrors(statePtr, TCL_WRITABLE) != 0) { return -1; } if (statePtr->encoding == NULL) { src = (char *) Tcl_GetByteArrayFromObj(objPtr, &srcLen); return WriteBytes(chanPtr, src, srcLen); } else { src = Tcl_GetStringFromObj(objPtr, &srcLen); return WriteChars(chanPtr, src, srcLen); } } /* *---------------------------------------------------------------------- * * WriteBytes -- * * Write a sequence of bytes into an output buffer, may queue the * buffer for output if it gets full, and also remembers whether the * current buffer is ready e.g. if it contains a newline and we are in * line buffering mode. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ static int WriteBytes(chanPtr, src, srcLen) Channel *chanPtr; /* The channel to buffer output for. */ CONST char *src; /* Bytes to write. */ int srcLen; /* Number of bytes to write. */ { ChannelState *statePtr = chanPtr->state; /* state info for channel */ ChannelBuffer *bufPtr; char *dst; int dstMax, sawLF, savedLF, total, dstLen, toWrite; total = 0; sawLF = 0; savedLF = 0; /* * Loop over all bytes in src, storing them in output buffer with * proper EOL translation. */ while (srcLen + savedLF > 0) { bufPtr = statePtr->curOutPtr; if (bufPtr == NULL) { bufPtr = AllocChannelBuffer(statePtr->bufSize); statePtr->curOutPtr = bufPtr; } dst = bufPtr->buf + bufPtr->nextAdded; dstMax = bufPtr->bufLength - bufPtr->nextAdded; dstLen = dstMax; toWrite = dstLen; if (toWrite > srcLen) { toWrite = srcLen; } if (savedLF) { /* * A '\n' was left over from last call to TranslateOutputEOL() * and we need to store it in this buffer. If the channel is * line-based, we will need to flush it. */ *dst++ = '\n'; dstLen--; sawLF++; } sawLF += TranslateOutputEOL(statePtr, dst, src, &dstLen, &toWrite); dstLen += savedLF; savedLF = 0; if (dstLen > dstMax) { savedLF = 1; dstLen = dstMax; } bufPtr->nextAdded += dstLen; if (CheckFlush(chanPtr, bufPtr, sawLF) != 0) { return -1; } total += dstLen; src += toWrite; srcLen -= toWrite; sawLF = 0; } return total; } /* *---------------------------------------------------------------------- * * WriteChars -- * * Convert UTF-8 bytes to the channel's external encoding and * write the produced bytes into an output buffer, may queue the * buffer for output if it gets full, and also remembers whether the * current buffer is ready e.g. if it contains a newline and we are in * line buffering mode. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ static int WriteChars(chanPtr, src, srcLen) Channel *chanPtr; /* The channel to buffer output for. */ CONST char *src; /* UTF-8 string to write. */ int srcLen; /* Length of UTF-8 string in bytes. */ { ChannelState *statePtr = chanPtr->state; /* state info for channel */ ChannelBuffer *bufPtr; char *dst, *stage; int saved, savedLF, sawLF, total, dstLen, stageMax, dstWrote; int stageLen, toWrite, stageRead, endEncoding, result; int consumedSomething; Tcl_Encoding encoding; char safe[BUFFER_PADDING]; total = 0; sawLF = 0; savedLF = 0; saved = 0; encoding = statePtr->encoding; /* * Write the terminated escape sequence even if srcLen is 0. */ endEncoding = ((statePtr->outputEncodingFlags & TCL_ENCODING_END) != 0); /* * Loop over all UTF-8 characters in src, storing them in staging buffer * with proper EOL translation. */ consumedSomething = 1; while (consumedSomething && (srcLen + savedLF + endEncoding > 0)) { consumedSomething = 0; stage = statePtr->outputStage; stageMax = statePtr->bufSize; stageLen = stageMax; toWrite = stageLen; if (toWrite > srcLen) { toWrite = srcLen; } if (savedLF) { /* * A '\n' was left over from last call to TranslateOutputEOL() * and we need to store it in the staging buffer. If the * channel is line-based, we will need to flush the output * buffer (after translating the staging buffer). */ *stage++ = '\n'; stageLen--; sawLF++; } sawLF += TranslateOutputEOL(statePtr, stage, src, &stageLen, &toWrite); stage -= savedLF; stageLen += savedLF; savedLF = 0; if (stageLen > stageMax) { savedLF = 1; stageLen = stageMax; } src += toWrite; srcLen -= toWrite; /* * Loop over all UTF-8 characters in staging buffer, converting them * to external encoding, storing them in output buffer. */ while (stageLen + saved + endEncoding > 0) { bufPtr = statePtr->curOutPtr; if (bufPtr == NULL) { bufPtr = AllocChannelBuffer(statePtr->bufSize); statePtr->curOutPtr = bufPtr; } dst = bufPtr->buf + bufPtr->nextAdded; dstLen = bufPtr->bufLength - bufPtr->nextAdded; if (saved != 0) { /* * Here's some translated bytes left over from the last * buffer that we need to stick at the beginning of this * buffer. */ memcpy((VOID *) dst, (VOID *) safe, (size_t) saved); bufPtr->nextAdded += saved; dst += saved; dstLen -= saved; saved = 0; } result = Tcl_UtfToExternal(NULL, encoding, stage, stageLen, statePtr->outputEncodingFlags, &statePtr->outputEncodingState, dst, dstLen + BUFFER_PADDING, &stageRead, &dstWrote, NULL); /* Fix for SF #506297, reported by Martin Forssen * . * * The encoding chosen in the script exposing the bug writes out * three intro characters when TCL_ENCODING_START is set, but does * not consume any input as TCL_ENCODING_END is cleared. As some * output was generated the enclosing loop calls UtfToExternal * again, again with START set. Three more characters in the out * and still no use of input ... To break this infinite loop we * remove TCL_ENCODING_START from the set of flags after the first * call (no condition is required, the later calls remove an unset * flag, which is a no-op). This causes the subsequent calls to * UtfToExternal to consume and convert the actual input. */ statePtr->outputEncodingFlags &= ~TCL_ENCODING_START; /* * The following code must be executed only when result is not 0. */ if (result && ((stageRead + dstWrote) == 0)) { /* * We have an incomplete UTF-8 character at the end of the * staging buffer. It will get moved to the beginning of the * staging buffer followed by more bytes from src. */ src -= stageLen; srcLen += stageLen; stageLen = 0; savedLF = 0; break; } bufPtr->nextAdded += dstWrote; if (bufPtr->nextAdded > bufPtr->bufLength) { /* * When translating from UTF-8 to external encoding, we * allowed the translation to produce a character that * crossed the end of the output buffer, so that we would * get a completely full buffer before flushing it. The * extra bytes will be moved to the beginning of the next * buffer. */ saved = bufPtr->nextAdded - bufPtr->bufLength; memcpy((VOID *) safe, (VOID *) (dst + dstLen), (size_t) saved); bufPtr->nextAdded = bufPtr->bufLength; } if (CheckFlush(chanPtr, bufPtr, sawLF) != 0) { return -1; } total += dstWrote; stage += stageRead; stageLen -= stageRead; sawLF = 0; consumedSomething = 1; /* * If all translated characters are written to the buffer, * endEncoding is set to 0 because the escape sequence may be * output. */ if ((stageLen + saved == 0) && (result == 0)) { endEncoding = 0; } } } /* If nothing was written and it happened because there was no progress * in the UTF conversion, we throw an error. */ if (!consumedSomething && (total == 0)) { Tcl_SetErrno (EINVAL); return -1; } return total; } /* *--------------------------------------------------------------------------- * * TranslateOutputEOL -- * * Helper function for WriteBytes() and WriteChars(). Converts the * '\n' characters in the source buffer into the appropriate EOL * form specified by the output translation mode. * * EOL translation stops either when the source buffer is empty * or the output buffer is full. * * When converting to CRLF mode and there is only 1 byte left in * the output buffer, this routine stores the '\r' in the last * byte and then stores the '\n' in the byte just past the end of the * buffer. The caller is responsible for passing in a buffer that * is large enough to hold the extra byte. * * Results: * The return value is 1 if a '\n' was translated from the source * buffer, or 0 otherwise -- this can be used by the caller to * decide to flush a line-based channel even though the channel * buffer is not full. * * *dstLenPtr is filled with how many bytes of the output buffer * were used. As mentioned above, this can be one more that * the output buffer's specified length if a CRLF was stored. * * *srcLenPtr is filled with how many bytes of the source buffer * were consumed. * * Side effects: * It may be obvious, but bears mentioning that when converting * in CRLF mode (which requires two bytes of storage in the output * buffer), the number of bytes consumed from the source buffer * will be less than the number of bytes stored in the output buffer. * *--------------------------------------------------------------------------- */ static int TranslateOutputEOL(statePtr, dst, src, dstLenPtr, srcLenPtr) ChannelState *statePtr; /* Channel being read, for translation and * buffering modes. */ char *dst; /* Output buffer filled with UTF-8 chars by * applying appropriate EOL translation to * source characters. */ CONST char *src; /* Source UTF-8 characters. */ int *dstLenPtr; /* On entry, the maximum length of output * buffer in bytes. On exit, the number of * bytes actually used in output buffer. */ int *srcLenPtr; /* On entry, the length of source buffer. * On exit, the number of bytes read from * the source buffer. */ { char *dstEnd; int srcLen, newlineFound; newlineFound = 0; srcLen = *srcLenPtr; switch (statePtr->outputTranslation) { case TCL_TRANSLATE_LF: { for (dstEnd = dst + srcLen; dst < dstEnd; ) { if (*src == '\n') { newlineFound = 1; } *dst++ = *src++; } *dstLenPtr = srcLen; break; } case TCL_TRANSLATE_CR: { for (dstEnd = dst + srcLen; dst < dstEnd;) { if (*src == '\n') { *dst++ = '\r'; newlineFound = 1; src++; } else { *dst++ = *src++; } } *dstLenPtr = srcLen; break; } case TCL_TRANSLATE_CRLF: { /* * Since this causes the number of bytes to grow, we * start off trying to put 'srcLen' bytes into the * output buffer, but allow it to store more bytes, as * long as there's still source bytes and room in the * output buffer. */ char *dstStart, *dstMax; CONST char *srcStart; dstStart = dst; dstMax = dst + *dstLenPtr; srcStart = src; if (srcLen < *dstLenPtr) { dstEnd = dst + srcLen; } else { dstEnd = dst + *dstLenPtr; } while (dst < dstEnd) { if (*src == '\n') { if (dstEnd < dstMax) { dstEnd++; } *dst++ = '\r'; newlineFound = 1; } *dst++ = *src++; } *srcLenPtr = src - srcStart; *dstLenPtr = dst - dstStart; break; } default: { break; } } return newlineFound; } /* *--------------------------------------------------------------------------- * * CheckFlush -- * * Helper function for WriteBytes() and WriteChars(). If the * channel buffer is ready to be flushed, flush it. * * Results: * The return value is -1 if there was a problem flushing the * channel buffer, or 0 otherwise. * * Side effects: * The buffer will be recycled if it is flushed. * *--------------------------------------------------------------------------- */ static int CheckFlush(chanPtr, bufPtr, newlineFlag) Channel *chanPtr; /* Channel being read, for buffering mode. */ ChannelBuffer *bufPtr; /* Channel buffer to possibly flush. */ int newlineFlag; /* Non-zero if a the channel buffer * contains a newline. */ { ChannelState *statePtr = chanPtr->state; /* state info for channel */ /* * The current buffer is ready for output: * 1. if it is full. * 2. if it contains a newline and this channel is line-buffered. * 3. if it contains any output and this channel is unbuffered. */ if ((statePtr->flags & BUFFER_READY) == 0) { if (bufPtr->nextAdded == bufPtr->bufLength) { statePtr->flags |= BUFFER_READY; } else if (statePtr->flags & CHANNEL_LINEBUFFERED) { if (newlineFlag != 0) { statePtr->flags |= BUFFER_READY; } } else if (statePtr->flags & CHANNEL_UNBUFFERED) { statePtr->flags |= BUFFER_READY; } } if (statePtr->flags & BUFFER_READY) { if (FlushChannel(NULL, chanPtr, 0) != 0) { return -1; } } return 0; } /* *--------------------------------------------------------------------------- * * Tcl_Gets -- * * Reads a complete line of input from the channel into a Tcl_DString. * * Results: * Length of line read (in characters) or -1 if error, EOF, or blocked. * If -1, use Tcl_GetErrno() to retrieve the POSIX error code for the * error or condition that occurred. * * Side effects: * May flush output on the channel. May cause input to be consumed * from the channel. * *--------------------------------------------------------------------------- */ int Tcl_Gets(chan, lineRead) Tcl_Channel chan; /* Channel from which to read. */ Tcl_DString *lineRead; /* The line read will be appended to this * DString as UTF-8 characters. The caller * must have initialized it and is responsible * for managing the storage. */ { Tcl_Obj *objPtr; int charsStored, length; char *string; objPtr = Tcl_NewObj(); charsStored = Tcl_GetsObj(chan, objPtr); if (charsStored > 0) { string = Tcl_GetStringFromObj(objPtr, &length); Tcl_DStringAppend(lineRead, string, length); } Tcl_DecrRefCount(objPtr); return charsStored; } /* *--------------------------------------------------------------------------- * * Tcl_GetsObj -- * * Accumulate input from the input channel until end-of-line or * end-of-file has been seen. Bytes read from the input channel * are converted to UTF-8 using the encoding specified by the * channel. * * Results: * Number of characters accumulated in the object or -1 if error, * blocked, or EOF. If -1, use Tcl_GetErrno() to retrieve the * POSIX error code for the error or condition that occurred. * * Side effects: * Consumes input from the channel. * * On reading EOF, leave channel pointing at EOF char. * On reading EOL, leave channel pointing after EOL, but don't * return EOL in dst buffer. * *--------------------------------------------------------------------------- */ int Tcl_GetsObj(chan, objPtr) Tcl_Channel chan; /* Channel from which to read. */ Tcl_Obj *objPtr; /* The line read will be appended to this * object as UTF-8 characters. */ { GetsState gs; Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* state info for channel */ ChannelBuffer *bufPtr; int inEofChar, skip, copiedTotal, oldLength, oldFlags, oldRemoved; Tcl_Encoding encoding; char *dst, *dstEnd, *eol, *eof; Tcl_EncodingState oldState; /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; if (CheckChannelErrors(statePtr, TCL_READABLE) != 0) { copiedTotal = -1; goto done; } bufPtr = statePtr->inQueueHead; encoding = statePtr->encoding; /* * Preserved so we can restore the channel's state in case we don't * find a newline in the available input. */ Tcl_GetStringFromObj(objPtr, &oldLength); oldFlags = statePtr->inputEncodingFlags; oldState = statePtr->inputEncodingState; oldRemoved = BUFFER_PADDING; if (bufPtr != NULL) { oldRemoved = bufPtr->nextRemoved; } /* * If there is no encoding, use "iso8859-1" -- Tcl_GetsObj() doesn't * produce ByteArray objects. To avoid circularity problems, * "iso8859-1" is builtin to Tcl. */ if (encoding == NULL) { encoding = Tcl_GetEncoding(NULL, "iso8859-1"); } /* * Object used by FilterInputBytes to keep track of how much data has * been consumed from the channel buffers. */ gs.objPtr = objPtr; gs.dstPtr = &dst; gs.encoding = encoding; gs.bufPtr = bufPtr; gs.state = oldState; gs.rawRead = 0; gs.bytesWrote = 0; gs.charsWrote = 0; gs.totalChars = 0; dst = objPtr->bytes + oldLength; dstEnd = dst; skip = 0; eof = NULL; inEofChar = statePtr->inEofChar; while (1) { if (dst >= dstEnd) { if (FilterInputBytes(chanPtr, &gs) != 0) { goto restore; } dstEnd = dst + gs.bytesWrote; } /* * Remember if EOF char is seen, then look for EOL anyhow, because * the EOL might be before the EOF char. */ if (inEofChar != '\0') { for (eol = dst; eol < dstEnd; eol++) { if (*eol == inEofChar) { dstEnd = eol; eof = eol; break; } } } /* * On EOL, leave current file position pointing after the EOL, but * don't store the EOL in the output string. */ switch (statePtr->inputTranslation) { case TCL_TRANSLATE_LF: { for (eol = dst; eol < dstEnd; eol++) { if (*eol == '\n') { skip = 1; goto goteol; } } break; } case TCL_TRANSLATE_CR: { for (eol = dst; eol < dstEnd; eol++) { if (*eol == '\r') { skip = 1; goto goteol; } } break; } case TCL_TRANSLATE_CRLF: { for (eol = dst; eol < dstEnd; eol++) { if (*eol == '\r') { eol++; if (eol >= dstEnd) { int offset; offset = eol - objPtr->bytes; dst = dstEnd; if (FilterInputBytes(chanPtr, &gs) != 0) { goto restore; } dstEnd = dst + gs.bytesWrote; eol = objPtr->bytes + offset; if (eol >= dstEnd) { skip = 0; goto goteol; } } if (*eol == '\n') { eol--; skip = 2; goto goteol; } } } break; } case TCL_TRANSLATE_AUTO: { eol = dst; skip = 1; if (statePtr->flags & INPUT_SAW_CR) { statePtr->flags &= ~INPUT_SAW_CR; if (*eol == '\n') { /* * Skip the raw bytes that make up the '\n'. */ char tmp[1 + TCL_UTF_MAX]; int rawRead; bufPtr = gs.bufPtr; Tcl_ExternalToUtf(NULL, gs.encoding, bufPtr->buf + bufPtr->nextRemoved, gs.rawRead, statePtr->inputEncodingFlags, &gs.state, tmp, 1 + TCL_UTF_MAX, &rawRead, NULL, NULL); bufPtr->nextRemoved += rawRead; gs.rawRead -= rawRead; gs.bytesWrote--; gs.charsWrote--; memmove(dst, dst + 1, (size_t) (dstEnd - dst)); dstEnd--; } } for (eol = dst; eol < dstEnd; eol++) { if (*eol == '\r') { eol++; if (eol == dstEnd) { /* * If buffer ended on \r, peek ahead to see if a * \n is available. */ int offset; offset = eol - objPtr->bytes; dst = dstEnd; PeekAhead(chanPtr, &dstEnd, &gs); eol = objPtr->bytes + offset; if (eol >= dstEnd) { eol--; statePtr->flags |= INPUT_SAW_CR; goto goteol; } } if (*eol == '\n') { skip++; } eol--; goto goteol; } else if (*eol == '\n') { goto goteol; } } } } if (eof != NULL) { /* * EOF character was seen. On EOF, leave current file position * pointing at the EOF character, but don't store the EOF * character in the output string. */ dstEnd = eof; statePtr->flags |= (CHANNEL_EOF | CHANNEL_STICKY_EOF); statePtr->inputEncodingFlags |= TCL_ENCODING_END; } if (statePtr->flags & CHANNEL_EOF) { skip = 0; eol = dstEnd; if (eol == objPtr->bytes + oldLength) { /* * If we didn't append any bytes before encountering EOF, * caller needs to see -1. */ Tcl_SetObjLength(objPtr, oldLength); CommonGetsCleanup(chanPtr, encoding); copiedTotal = -1; goto done; } goto goteol; } dst = dstEnd; } /* * Found EOL or EOF, but the output buffer may now contain too many * UTF-8 characters. We need to know how many raw bytes correspond to * the number of UTF-8 characters we want, plus how many raw bytes * correspond to the character(s) making up EOL (if any), so we can * remove the correct number of bytes from the channel buffer. */ goteol: bufPtr = gs.bufPtr; statePtr->inputEncodingState = gs.state; Tcl_ExternalToUtf(NULL, gs.encoding, bufPtr->buf + bufPtr->nextRemoved, gs.rawRead, statePtr->inputEncodingFlags, &statePtr->inputEncodingState, dst, eol - dst + skip + TCL_UTF_MAX, &gs.rawRead, NULL, &gs.charsWrote); bufPtr->nextRemoved += gs.rawRead; /* * Recycle all the emptied buffers. */ Tcl_SetObjLength(objPtr, eol - objPtr->bytes); CommonGetsCleanup(chanPtr, encoding); statePtr->flags &= ~CHANNEL_BLOCKED; copiedTotal = gs.totalChars + gs.charsWrote - skip; goto done; /* * Couldn't get a complete line. This only happens if we get a error * reading from the channel or we are non-blocking and there wasn't * an EOL or EOF in the data available. */ restore: bufPtr = statePtr->inQueueHead; bufPtr->nextRemoved = oldRemoved; for (bufPtr = bufPtr->nextPtr; bufPtr != NULL; bufPtr = bufPtr->nextPtr) { bufPtr->nextRemoved = BUFFER_PADDING; } CommonGetsCleanup(chanPtr, encoding); statePtr->inputEncodingState = oldState; statePtr->inputEncodingFlags = oldFlags; Tcl_SetObjLength(objPtr, oldLength); /* * We didn't get a complete line so we need to indicate to UpdateInterest * that the gets blocked. It will wait for more data instead of firing * a timer, avoiding a busy wait. This is where we are assuming that the * next operation is a gets. No more file events will be delivered on * this channel until new data arrives or some operation is performed * on the channel (e.g. gets, read, fconfigure) that changes the blocking * state. Note that this means a file event will not be delivered even * though a read would be able to consume the buffered data. */ statePtr->flags |= CHANNEL_NEED_MORE_DATA; copiedTotal = -1; done: /* * Update the notifier state so we don't block while there is still * data in the buffers. */ UpdateInterest(chanPtr); return copiedTotal; } /* *--------------------------------------------------------------------------- * * FilterInputBytes -- * * Helper function for Tcl_GetsObj. Produces UTF-8 characters from * raw bytes read from the channel. * * Consumes available bytes from channel buffers. When channel * buffers are exhausted, reads more bytes from channel device into * a new channel buffer. It is the caller's responsibility to * free the channel buffers that have been exhausted. * * Results: * The return value is -1 if there was an error reading from the * channel, 0 otherwise. * * Side effects: * Status object keeps track of how much data from channel buffers * has been consumed and where UTF-8 bytes should be stored. * *--------------------------------------------------------------------------- */ static int FilterInputBytes(chanPtr, gsPtr) Channel *chanPtr; /* Channel to read. */ GetsState *gsPtr; /* Current state of gets operation. */ { ChannelState *statePtr = chanPtr->state; /* state info for channel */ ChannelBuffer *bufPtr; char *raw, *rawStart, *rawEnd; char *dst; int offset, toRead, dstNeeded, spaceLeft, result, rawLen, length; Tcl_Obj *objPtr; #define ENCODING_LINESIZE 20 /* Lower bound on how many bytes to convert * at a time. Since we don't know a priori * how many bytes of storage this many source * bytes will use, we actually need at least * ENCODING_LINESIZE * TCL_MAX_UTF bytes of * room. */ objPtr = gsPtr->objPtr; /* * Subtract the number of bytes that were removed from channel buffer * during last call. */ bufPtr = gsPtr->bufPtr; if (bufPtr != NULL) { bufPtr->nextRemoved += gsPtr->rawRead; if (bufPtr->nextRemoved >= bufPtr->nextAdded) { bufPtr = bufPtr->nextPtr; } } gsPtr->totalChars += gsPtr->charsWrote; if ((bufPtr == NULL) || (bufPtr->nextAdded == BUFFER_PADDING)) { /* * All channel buffers were exhausted and the caller still hasn't * seen EOL. Need to read more bytes from the channel device. * Side effect is to allocate another channel buffer. */ read: if (statePtr->flags & CHANNEL_BLOCKED) { if (statePtr->flags & CHANNEL_NONBLOCKING) { gsPtr->charsWrote = 0; gsPtr->rawRead = 0; return -1; } statePtr->flags &= ~CHANNEL_BLOCKED; } if (GetInput(chanPtr) != 0) { gsPtr->charsWrote = 0; gsPtr->rawRead = 0; return -1; } bufPtr = statePtr->inQueueTail; gsPtr->bufPtr = bufPtr; } /* * Convert some of the bytes from the channel buffer to UTF-8. Space in * objPtr's string rep is used to hold the UTF-8 characters. Grow the * string rep if we need more space. */ rawStart = bufPtr->buf + bufPtr->nextRemoved; raw = rawStart; rawEnd = bufPtr->buf + bufPtr->nextAdded; rawLen = rawEnd - rawStart; dst = *gsPtr->dstPtr; offset = dst - objPtr->bytes; toRead = ENCODING_LINESIZE; if (toRead > rawLen) { toRead = rawLen; } dstNeeded = toRead * TCL_UTF_MAX + 1; spaceLeft = objPtr->length - offset - TCL_UTF_MAX - 1; if (dstNeeded > spaceLeft) { length = offset * 2; if (offset < dstNeeded) { length = offset + dstNeeded; } length += TCL_UTF_MAX + 1; Tcl_SetObjLength(objPtr, length); spaceLeft = length - offset; dst = objPtr->bytes + offset; *gsPtr->dstPtr = dst; } gsPtr->state = statePtr->inputEncodingState; result = Tcl_ExternalToUtf(NULL, gsPtr->encoding, raw, rawLen, statePtr->inputEncodingFlags, &statePtr->inputEncodingState, dst, spaceLeft, &gsPtr->rawRead, &gsPtr->bytesWrote, &gsPtr->charsWrote); /* * Make sure that if we go through 'gets', that we reset the * TCL_ENCODING_START flag still. [Bug #523988] */ statePtr->inputEncodingFlags &= ~TCL_ENCODING_START; if (result == TCL_CONVERT_MULTIBYTE) { /* * The last few bytes in this channel buffer were the start of a * multibyte sequence. If this buffer was full, then move them to * the next buffer so the bytes will be contiguous. */ ChannelBuffer *nextPtr; int extra; nextPtr = bufPtr->nextPtr; if (bufPtr->nextAdded < bufPtr->bufLength) { if (gsPtr->rawRead > 0) { /* * Some raw bytes were converted to UTF-8. Fall through, * returning those UTF-8 characters because a EOL might be * present in them. */ } else if (statePtr->flags & CHANNEL_EOF) { /* * There was a partial character followed by EOF on the * device. Fall through, returning that nothing was found. */ bufPtr->nextRemoved = bufPtr->nextAdded; } else { /* * There are no more cached raw bytes left. See if we can * get some more. */ goto read; } } else { if (nextPtr == NULL) { nextPtr = AllocChannelBuffer(statePtr->bufSize); bufPtr->nextPtr = nextPtr; statePtr->inQueueTail = nextPtr; } extra = rawLen - gsPtr->rawRead; memcpy((VOID *) (nextPtr->buf + BUFFER_PADDING - extra), (VOID *) (raw + gsPtr->rawRead), (size_t) extra); nextPtr->nextRemoved -= extra; bufPtr->nextAdded -= extra; } } gsPtr->bufPtr = bufPtr; return 0; } /* *--------------------------------------------------------------------------- * * PeekAhead -- * * Helper function used by Tcl_GetsObj(). Called when we've seen a * \r at the end of the UTF-8 string and want to look ahead one * character to see if it is a \n. * * Results: * *gsPtr->dstPtr is filled with a pointer to the start of the range of * UTF-8 characters that were found by peeking and *dstEndPtr is filled * with a pointer to the bytes just after the end of the range. * * Side effects: * If no more raw bytes were available in one of the channel buffers, * tries to perform a non-blocking read to get more bytes from the * channel device. * *--------------------------------------------------------------------------- */ static void PeekAhead(chanPtr, dstEndPtr, gsPtr) Channel *chanPtr; /* The channel to read. */ char **dstEndPtr; /* Filled with pointer to end of new range * of UTF-8 characters. */ GetsState *gsPtr; /* Current state of gets operation. */ { ChannelState *statePtr = chanPtr->state; /* state info for channel */ ChannelBuffer *bufPtr; Tcl_DriverBlockModeProc *blockModeProc; int bytesLeft; bufPtr = gsPtr->bufPtr; /* * If there's any more raw input that's still buffered, we'll peek into * that. Otherwise, only get more data from the channel driver if it * looks like there might actually be more data. The assumption is that * if the channel buffer is filled right up to the end, then there * might be more data to read. */ blockModeProc = NULL; if (bufPtr->nextPtr == NULL) { bytesLeft = bufPtr->nextAdded - (bufPtr->nextRemoved + gsPtr->rawRead); if (bytesLeft == 0) { if (bufPtr->nextAdded < bufPtr->bufLength) { /* * Don't peek ahead if last read was short read. */ goto cleanup; } if ((statePtr->flags & CHANNEL_NONBLOCKING) == 0) { blockModeProc = Tcl_ChannelBlockModeProc(chanPtr->typePtr); if (blockModeProc == NULL) { /* * Don't peek ahead if cannot set non-blocking mode. */ goto cleanup; } StackSetBlockMode(chanPtr, TCL_MODE_NONBLOCKING); } } } if (FilterInputBytes(chanPtr, gsPtr) == 0) { *dstEndPtr = *gsPtr->dstPtr + gsPtr->bytesWrote; } if (blockModeProc != NULL) { StackSetBlockMode(chanPtr, TCL_MODE_BLOCKING); } return; cleanup: bufPtr->nextRemoved += gsPtr->rawRead; gsPtr->rawRead = 0; gsPtr->totalChars += gsPtr->charsWrote; gsPtr->bytesWrote = 0; gsPtr->charsWrote = 0; } /* *--------------------------------------------------------------------------- * * CommonGetsCleanup -- * * Helper function for Tcl_GetsObj() to restore the channel after * a "gets" operation. * * Results: * None. * * Side effects: * Encoding may be freed. * *--------------------------------------------------------------------------- */ static void CommonGetsCleanup(chanPtr, encoding) Channel *chanPtr; Tcl_Encoding encoding; { ChannelState *statePtr = chanPtr->state; /* state info for channel */ ChannelBuffer *bufPtr, *nextPtr; bufPtr = statePtr->inQueueHead; for ( ; bufPtr != NULL; bufPtr = nextPtr) { nextPtr = bufPtr->nextPtr; if (bufPtr->nextRemoved < bufPtr->nextAdded) { break; } RecycleBuffer(statePtr, bufPtr, 0); } statePtr->inQueueHead = bufPtr; if (bufPtr == NULL) { statePtr->inQueueTail = NULL; } else { /* * If any multi-byte characters were split across channel buffer * boundaries, the split-up bytes were moved to the next channel * buffer by FilterInputBytes(). Move the bytes back to their * original buffer because the caller could change the channel's * encoding which could change the interpretation of whether those * bytes really made up multi-byte characters after all. */ nextPtr = bufPtr->nextPtr; for ( ; nextPtr != NULL; nextPtr = bufPtr->nextPtr) { int extra; extra = bufPtr->bufLength - bufPtr->nextAdded; if (extra > 0) { memcpy((VOID *) (bufPtr->buf + bufPtr->nextAdded), (VOID *) (nextPtr->buf + BUFFER_PADDING - extra), (size_t) extra); bufPtr->nextAdded += extra; nextPtr->nextRemoved = BUFFER_PADDING; } bufPtr = nextPtr; } } if (statePtr->encoding == NULL) { Tcl_FreeEncoding(encoding); } } /* *---------------------------------------------------------------------- * * Tcl_Read -- * * Reads a given number of bytes from a channel. EOL and EOF * translation is done on the bytes being read, so the the number * of bytes consumed from the channel may not be equal to the * number of bytes stored in the destination buffer. * * No encoding conversions are applied to the bytes being read. * * Results: * The number of bytes read, or -1 on error. Use Tcl_GetErrno() * to retrieve the error code for the error that occurred. * * Side effects: * May cause input to be buffered. * *---------------------------------------------------------------------- */ int Tcl_Read(chan, dst, bytesToRead) Tcl_Channel chan; /* The channel from which to read. */ char *dst; /* Where to store input read. */ int bytesToRead; /* Maximum number of bytes to read. */ { Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* state info for channel */ /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; if (CheckChannelErrors(statePtr, TCL_READABLE) != 0) { return -1; } return DoRead(chanPtr, dst, bytesToRead); } /* *---------------------------------------------------------------------- * * Tcl_ReadRaw -- * * Reads a given number of bytes from a channel. EOL and EOF * translation is done on the bytes being read, so the the number * of bytes consumed from the channel may not be equal to the * number of bytes stored in the destination buffer. * * No encoding conversions are applied to the bytes being read. * * Results: * The number of bytes read, or -1 on error. Use Tcl_GetErrno() * to retrieve the error code for the error that occurred. * * Side effects: * May cause input to be buffered. * *---------------------------------------------------------------------- */ int Tcl_ReadRaw(chan, bufPtr, bytesToRead) Tcl_Channel chan; /* The channel from which to read. */ char *bufPtr; /* Where to store input read. */ int bytesToRead; /* Maximum number of bytes to read. */ { Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* state info for channel */ int nread, result; int copied, copiedNow; /* * The check below does too much because it will reject a call to this * function with a channel which is part of an 'fcopy'. But we have to * allow this here or else the chaining in the transformation drivers * will fail with 'file busy' error instead of retrieving and * transforming the data to copy. * * We let the check procedure now believe that there is no fcopy in * progress. A better solution than this might be an additional flag * argument to switch off specific checks. */ if (CheckChannelErrors(statePtr, TCL_READABLE | CHANNEL_RAW_MODE) != 0) { return -1; } /* * Check for information in the push-back buffers. If there is * some, use it. Go to the driver only if there is none (anymore) * and the caller requests more bytes. */ for (copied = 0; copied < bytesToRead; copied += copiedNow) { copiedNow = CopyBuffer(chanPtr, bufPtr + copied, bytesToRead - copied); if (copiedNow == 0) { if (statePtr->flags & CHANNEL_EOF) { goto done; } if (statePtr->flags & CHANNEL_BLOCKED) { if (statePtr->flags & CHANNEL_NONBLOCKING) { goto done; } statePtr->flags &= (~(CHANNEL_BLOCKED)); } #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING /* [SF Tcl Bug 943274]. Better emulation of non-blocking * channels for channels without BlockModeProc, by keeping * track of true fileevents generated by the OS == Data * waiting and reading if and only if we are sure to have * data. */ if ((statePtr->flags & CHANNEL_NONBLOCKING) && (Tcl_ChannelBlockModeProc(chanPtr->typePtr) == NULL) && !(statePtr->flags & CHANNEL_HAS_MORE_DATA)) { /* We bypass the driver, it would block, as no data is available */ nread = -1; result = EWOULDBLOCK; } else { #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ /* * Now go to the driver to get as much as is possible to * fill the remaining request. Do all the error handling * by ourselves. The code was stolen from 'GetInput' and * slightly adapted (different return value here). * * The case of 'bytesToRead == 0' at this point cannot happen. */ nread = (chanPtr->typePtr->inputProc)(chanPtr->instanceData, bufPtr + copied, bytesToRead - copied, &result); #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING } #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ if (nread > 0) { /* * If we get a short read, signal up that we may be * BLOCKED. We should avoid calling the driver because * on some platforms we will block in the low level * reading code even though the channel is set into * nonblocking mode. */ if (nread < (bytesToRead - copied)) { statePtr->flags |= CHANNEL_BLOCKED; } #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING if (nread <= (bytesToRead - copied)) { /* [SF Tcl Bug 943274] We have read the available * data, clear flag */ statePtr->flags &= ~CHANNEL_HAS_MORE_DATA; } #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ } else if (nread == 0) { statePtr->flags |= CHANNEL_EOF; statePtr->inputEncodingFlags |= TCL_ENCODING_END; } else if (nread < 0) { if ((result == EWOULDBLOCK) || (result == EAGAIN)) { if (copied > 0) { /* * Information that was copied earlier has precedence * over EAGAIN/WOULDBLOCK handling. */ return copied; } statePtr->flags |= CHANNEL_BLOCKED; result = EAGAIN; } Tcl_SetErrno(result); return -1; } return copied + nread; } } done: return copied; } /* *--------------------------------------------------------------------------- * * Tcl_ReadChars -- * * Reads from the channel until the requested number of characters * have been seen, EOF is seen, or the channel would block. EOL * and EOF translation is done. If reading binary data, the raw * bytes are wrapped in a Tcl byte array object. Otherwise, the raw * bytes are converted to UTF-8 using the channel's current encoding * and stored in a Tcl string object. * * Results: * The number of characters read, or -1 on error. Use Tcl_GetErrno() * to retrieve the error code for the error that occurred. * * Side effects: * May cause input to be buffered. * *--------------------------------------------------------------------------- */ int Tcl_ReadChars(chan, objPtr, toRead, appendFlag) Tcl_Channel chan; /* The channel to read. */ Tcl_Obj *objPtr; /* Input data is stored in this object. */ int toRead; /* Maximum number of characters to store, * or -1 to read all available data (up to EOF * or when channel blocks). */ int appendFlag; /* If non-zero, data read from the channel * will be appended to the object. Otherwise, * the data will replace the existing contents * of the object. */ { Channel* chanPtr = (Channel *) chan; ChannelState* statePtr = chanPtr->state; /* state info for channel */ /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; if (CheckChannelErrors(statePtr, TCL_READABLE) != 0) { /* * Update the notifier state so we don't block while there is still * data in the buffers. */ UpdateInterest(chanPtr); return -1; } return DoReadChars (chanPtr, objPtr, toRead, appendFlag); } /* *--------------------------------------------------------------------------- * * DoReadChars -- * * Reads from the channel until the requested number of characters * have been seen, EOF is seen, or the channel would block. EOL * and EOF translation is done. If reading binary data, the raw * bytes are wrapped in a Tcl byte array object. Otherwise, the raw * bytes are converted to UTF-8 using the channel's current encoding * and stored in a Tcl string object. * * Results: * The number of characters read, or -1 on error. Use Tcl_GetErrno() * to retrieve the error code for the error that occurred. * * Side effects: * May cause input to be buffered. * *--------------------------------------------------------------------------- */ static int DoReadChars(chanPtr, objPtr, toRead, appendFlag) Channel* chanPtr; /* The channel to read. */ Tcl_Obj *objPtr; /* Input data is stored in this object. */ int toRead; /* Maximum number of characters to store, * or -1 to read all available data (up to EOF * or when channel blocks). */ int appendFlag; /* If non-zero, data read from the channel * will be appended to the object. Otherwise, * the data will replace the existing contents * of the object. */ { ChannelState *statePtr = chanPtr->state; /* state info for channel */ ChannelBuffer *bufPtr; int offset, factor, copied, copiedNow, result; Tcl_Encoding encoding; #define UTF_EXPANSION_FACTOR 1024 /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; encoding = statePtr->encoding; factor = UTF_EXPANSION_FACTOR; if (appendFlag == 0) { if (encoding == NULL) { Tcl_SetByteArrayLength(objPtr, 0); } else { Tcl_SetObjLength(objPtr, 0); /* * We're going to access objPtr->bytes directly, so * we must ensure that this is actually a string * object (otherwise it might have been pure Unicode). */ Tcl_GetString(objPtr); } offset = 0; } else { if (encoding == NULL) { Tcl_GetByteArrayFromObj(objPtr, &offset); } else { Tcl_GetStringFromObj(objPtr, &offset); } } for (copied = 0; (unsigned) toRead > 0; ) { copiedNow = -1; if (statePtr->inQueueHead != NULL) { if (encoding == NULL) { copiedNow = ReadBytes(statePtr, objPtr, toRead, &offset); } else { copiedNow = ReadChars(statePtr, objPtr, toRead, &offset, &factor); } /* * If the current buffer is empty recycle it. */ bufPtr = statePtr->inQueueHead; if (bufPtr->nextRemoved == bufPtr->nextAdded) { ChannelBuffer *nextPtr; nextPtr = bufPtr->nextPtr; RecycleBuffer(statePtr, bufPtr, 0); statePtr->inQueueHead = nextPtr; if (nextPtr == NULL) { statePtr->inQueueTail = NULL; } } } if (copiedNow < 0) { if (statePtr->flags & CHANNEL_EOF) { break; } if (statePtr->flags & CHANNEL_BLOCKED) { if (statePtr->flags & CHANNEL_NONBLOCKING) { break; } statePtr->flags &= ~CHANNEL_BLOCKED; } result = GetInput(chanPtr); if (result != 0) { if (result == EAGAIN) { break; } copied = -1; goto done; } } else { copied += copiedNow; toRead -= copiedNow; } } statePtr->flags &= ~CHANNEL_BLOCKED; if (encoding == NULL) { Tcl_SetByteArrayLength(objPtr, offset); } else { Tcl_SetObjLength(objPtr, offset); } done: /* * Update the notifier state so we don't block while there is still * data in the buffers. */ UpdateInterest(chanPtr); return copied; } /* *--------------------------------------------------------------------------- * * ReadBytes -- * * Reads from the channel until the requested number of bytes have * been seen, EOF is seen, or the channel would block. Bytes from * the channel are stored in objPtr as a ByteArray object. EOL * and EOF translation are done. * * 'bytesToRead' can safely be a very large number because * space is only allocated to hold data read from the channel * as needed. * * Results: * The return value is the number of bytes appended to the object * and *offsetPtr is filled with the total number of bytes in the * object (greater than the return value if there were already bytes * in the object). * * Side effects: * None. * *--------------------------------------------------------------------------- */ static int ReadBytes(statePtr, objPtr, bytesToRead, offsetPtr) ChannelState *statePtr; /* State of the channel to read. */ Tcl_Obj *objPtr; /* Input data is appended to this ByteArray * object. Its length is how much space * has been allocated to hold data, not how * many bytes of data have been stored in the * object. */ int bytesToRead; /* Maximum number of bytes to store, * or < 0 to get all available bytes. * Bytes are obtained from the first * buffer in the queue -- even if this number * is larger than the number of bytes * available in the first buffer, only the * bytes from the first buffer are * returned. */ int *offsetPtr; /* On input, contains how many bytes of * objPtr have been used to hold data. On * output, filled with how many bytes are now * being used. */ { int toRead, srcLen, offset, length, srcRead, dstWrote; ChannelBuffer *bufPtr; char *src, *dst; offset = *offsetPtr; bufPtr = statePtr->inQueueHead; src = bufPtr->buf + bufPtr->nextRemoved; srcLen = bufPtr->nextAdded - bufPtr->nextRemoved; toRead = bytesToRead; if ((unsigned) toRead > (unsigned) srcLen) { toRead = srcLen; } dst = (char *) Tcl_GetByteArrayFromObj(objPtr, &length); if (toRead > length - offset - 1) { /* * Double the existing size of the object or make enough room to * hold all the characters we may get from the source buffer, * whichever is larger. */ length = offset * 2; if (offset < toRead) { length = offset + toRead + 1; } dst = (char *) Tcl_SetByteArrayLength(objPtr, length); } dst += offset; if (statePtr->flags & INPUT_NEED_NL) { statePtr->flags &= ~INPUT_NEED_NL; if ((srcLen == 0) || (*src != '\n')) { *dst = '\r'; *offsetPtr += 1; return 1; } *dst++ = '\n'; src++; srcLen--; toRead--; } srcRead = srcLen; dstWrote = toRead; if (TranslateInputEOL(statePtr, dst, src, &dstWrote, &srcRead) != 0) { if (dstWrote == 0) { return -1; } } bufPtr->nextRemoved += srcRead; *offsetPtr += dstWrote; return dstWrote; } /* *--------------------------------------------------------------------------- * * ReadChars -- * * Reads from the channel until the requested number of UTF-8 * characters have been seen, EOF is seen, or the channel would * block. Raw bytes from the channel are converted to UTF-8 * and stored in objPtr. EOL and EOF translation is done. * * 'charsToRead' can safely be a very large number because * space is only allocated to hold data read from the channel * as needed. * * Results: * The return value is the number of characters appended to * the object, *offsetPtr is filled with the number of bytes that * were appended, and *factorPtr is filled with the expansion * factor used to guess how many bytes of UTF-8 to allocate to * hold N source bytes. * * Side effects: * None. * *--------------------------------------------------------------------------- */ static int ReadChars(statePtr, objPtr, charsToRead, offsetPtr, factorPtr) ChannelState *statePtr; /* State of channel to read. */ Tcl_Obj *objPtr; /* Input data is appended to this object. * objPtr->length is how much space has been * allocated to hold data, not how many bytes * of data have been stored in the object. */ int charsToRead; /* Maximum number of characters to store, * or -1 to get all available characters. * Characters are obtained from the first * buffer in the queue -- even if this number * is larger than the number of characters * available in the first buffer, only the * characters from the first buffer are * returned. */ int *offsetPtr; /* On input, contains how many bytes of * objPtr have been used to hold data. On * output, filled with how many bytes are now * being used. */ int *factorPtr; /* On input, contains a guess of how many * bytes need to be allocated to hold the * result of converting N source bytes to * UTF-8. On output, contains another guess * based on the data seen so far. */ { int toRead, factor, offset, spaceLeft, length, srcLen, dstNeeded; int srcRead, dstWrote, numChars, dstRead; ChannelBuffer *bufPtr; char *src, *dst; Tcl_EncodingState oldState; factor = *factorPtr; offset = *offsetPtr; bufPtr = statePtr->inQueueHead; src = bufPtr->buf + bufPtr->nextRemoved; srcLen = bufPtr->nextAdded - bufPtr->nextRemoved; toRead = charsToRead; if ((unsigned)toRead > (unsigned)srcLen) { toRead = srcLen; } /* * 'factor' is how much we guess that the bytes in the source buffer * will expand when converted to UTF-8 chars. This guess comes from * analyzing how many characters were produced by the previous * pass. */ dstNeeded = toRead * factor / UTF_EXPANSION_FACTOR; spaceLeft = objPtr->length - offset - TCL_UTF_MAX - 1; if (dstNeeded > spaceLeft) { /* * Double the existing size of the object or make enough room to * hold all the characters we want from the source buffer, * whichever is larger. */ length = offset * 2; if (offset < dstNeeded) { length = offset + dstNeeded; } spaceLeft = length - offset; length += TCL_UTF_MAX + 1; Tcl_SetObjLength(objPtr, length); } if (toRead == srcLen) { /* * Want to convert the whole buffer in one pass. If we have * enough space, convert it using all available space in object * rather than using the factor. */ dstNeeded = spaceLeft; } dst = objPtr->bytes + offset; oldState = statePtr->inputEncodingState; if (statePtr->flags & INPUT_NEED_NL) { /* * We want a '\n' because the last character we saw was '\r'. */ statePtr->flags &= ~INPUT_NEED_NL; Tcl_ExternalToUtf(NULL, statePtr->encoding, src, srcLen, statePtr->inputEncodingFlags, &statePtr->inputEncodingState, dst, TCL_UTF_MAX + 1, &srcRead, &dstWrote, &numChars); if ((dstWrote > 0) && (*dst == '\n')) { /* * The next char was a '\n'. Consume it and produce a '\n'. */ bufPtr->nextRemoved += srcRead; } else { /* * The next char was not a '\n'. Produce a '\r'. */ *dst = '\r'; } statePtr->inputEncodingFlags &= ~TCL_ENCODING_START; *offsetPtr += 1; return 1; } Tcl_ExternalToUtf(NULL, statePtr->encoding, src, srcLen, statePtr->inputEncodingFlags, &statePtr->inputEncodingState, dst, dstNeeded + TCL_UTF_MAX, &srcRead, &dstWrote, &numChars); if (srcRead == 0) { /* * Not enough bytes in src buffer to make a complete char. Copy * the bytes to the next buffer to make a new contiguous string, * then tell the caller to fill the buffer with more bytes. */ ChannelBuffer *nextPtr; nextPtr = bufPtr->nextPtr; if (nextPtr == NULL) { if (srcLen > 0) { /* * There isn't enough data in the buffers to complete the next * character, so we need to wait for more data before the next * file event can be delivered. * * SF #478856. * * The exception to this is if the input buffer was * completely empty before we tried to convert its * contents. Nothing in, nothing out, and no incomplete * character data. The conversion before the current one * was complete. */ statePtr->flags |= CHANNEL_NEED_MORE_DATA; } return -1; } nextPtr->nextRemoved -= srcLen; memcpy((VOID *) (nextPtr->buf + nextPtr->nextRemoved), (VOID *) src, (size_t) srcLen); RecycleBuffer(statePtr, bufPtr, 0); statePtr->inQueueHead = nextPtr; return ReadChars(statePtr, objPtr, charsToRead, offsetPtr, factorPtr); } dstRead = dstWrote; if (TranslateInputEOL(statePtr, dst, dst, &dstWrote, &dstRead) != 0) { /* * Hit EOF char. How many bytes of src correspond to where the * EOF was located in dst? Run the conversion again with an * output buffer just big enough to hold the data so we can * get the correct value for srcRead. */ if (dstWrote == 0) { return -1; } statePtr->inputEncodingState = oldState; Tcl_ExternalToUtf(NULL, statePtr->encoding, src, srcLen, statePtr->inputEncodingFlags, &statePtr->inputEncodingState, dst, dstRead + TCL_UTF_MAX, &srcRead, &dstWrote, &numChars); TranslateInputEOL(statePtr, dst, dst, &dstWrote, &dstRead); } /* * The number of characters that we got may be less than the number * that we started with because "\r\n" sequences may have been * turned into just '\n' in dst. */ numChars -= (dstRead - dstWrote); if ((unsigned) numChars > (unsigned) toRead) { /* * Got too many chars. */ CONST char *eof; eof = Tcl_UtfAtIndex(dst, toRead); statePtr->inputEncodingState = oldState; Tcl_ExternalToUtf(NULL, statePtr->encoding, src, srcLen, statePtr->inputEncodingFlags, &statePtr->inputEncodingState, dst, eof - dst + TCL_UTF_MAX, &srcRead, &dstWrote, &numChars); dstRead = dstWrote; TranslateInputEOL(statePtr, dst, dst, &dstWrote, &dstRead); numChars -= (dstRead - dstWrote); } statePtr->inputEncodingFlags &= ~TCL_ENCODING_START; bufPtr->nextRemoved += srcRead; if (dstWrote > srcRead + 1) { *factorPtr = dstWrote * UTF_EXPANSION_FACTOR / srcRead; } *offsetPtr += dstWrote; return numChars; } /* *--------------------------------------------------------------------------- * * TranslateInputEOL -- * * Perform input EOL and EOF translation on the source buffer, * leaving the translated result in the destination buffer. * * Results: * The return value is 1 if the EOF character was found when copying * bytes to the destination buffer, 0 otherwise. * * Side effects: * None. * *--------------------------------------------------------------------------- */ static int TranslateInputEOL(statePtr, dstStart, srcStart, dstLenPtr, srcLenPtr) ChannelState *statePtr; /* Channel being read, for EOL translation * and EOF character. */ char *dstStart; /* Output buffer filled with chars by * applying appropriate EOL translation to * source characters. */ CONST char *srcStart; /* Source characters. */ int *dstLenPtr; /* On entry, the maximum length of output * buffer in bytes; must be <= *srcLenPtr. On * exit, the number of bytes actually used in * output buffer. */ int *srcLenPtr; /* On entry, the length of source buffer. * On exit, the number of bytes read from * the source buffer. */ { int dstLen, srcLen, inEofChar; CONST char *eof; dstLen = *dstLenPtr; eof = NULL; inEofChar = statePtr->inEofChar; if (inEofChar != '\0') { /* * Find EOF in translated buffer then compress out the EOL. The * source buffer may be much longer than the destination buffer -- * we only want to return EOF if the EOF has been copied to the * destination buffer. */ CONST char *src, *srcMax; srcMax = srcStart + *srcLenPtr; for (src = srcStart; src < srcMax; src++) { if (*src == inEofChar) { eof = src; srcLen = src - srcStart; if (srcLen < dstLen) { dstLen = srcLen; } *srcLenPtr = srcLen; break; } } } switch (statePtr->inputTranslation) { case TCL_TRANSLATE_LF: { if (dstStart != srcStart) { memcpy((VOID *) dstStart, (VOID *) srcStart, (size_t) dstLen); } srcLen = dstLen; break; } case TCL_TRANSLATE_CR: { char *dst, *dstEnd; if (dstStart != srcStart) { memcpy((VOID *) dstStart, (VOID *) srcStart, (size_t) dstLen); } dstEnd = dstStart + dstLen; for (dst = dstStart; dst < dstEnd; dst++) { if (*dst == '\r') { *dst = '\n'; } } srcLen = dstLen; break; } case TCL_TRANSLATE_CRLF: { char *dst; CONST char *src, *srcEnd, *srcMax; dst = dstStart; src = srcStart; srcEnd = srcStart + dstLen; srcMax = srcStart + *srcLenPtr; for ( ; src < srcEnd; ) { if (*src == '\r') { src++; if (src >= srcMax) { statePtr->flags |= INPUT_NEED_NL; } else if (*src == '\n') { *dst++ = *src++; } else { *dst++ = '\r'; } } else { *dst++ = *src++; } } srcLen = src - srcStart; dstLen = dst - dstStart; break; } case TCL_TRANSLATE_AUTO: { char *dst; CONST char *src, *srcEnd, *srcMax; dst = dstStart; src = srcStart; srcEnd = srcStart + dstLen; srcMax = srcStart + *srcLenPtr; if ((statePtr->flags & INPUT_SAW_CR) && (src < srcMax)) { if (*src == '\n') { src++; } statePtr->flags &= ~INPUT_SAW_CR; } for ( ; src < srcEnd; ) { if (*src == '\r') { src++; if (src >= srcMax) { statePtr->flags |= INPUT_SAW_CR; } else if (*src == '\n') { if (srcEnd < srcMax) { srcEnd++; } src++; } *dst++ = '\n'; } else { *dst++ = *src++; } } srcLen = src - srcStart; dstLen = dst - dstStart; break; } default: { /* lint. */ return 0; } } *dstLenPtr = dstLen; if ((eof != NULL) && (srcStart + srcLen >= eof)) { /* * EOF character was seen in EOL translated range. Leave current * file position pointing at the EOF character, but don't store the * EOF character in the output string. */ statePtr->flags |= (CHANNEL_EOF | CHANNEL_STICKY_EOF); statePtr->inputEncodingFlags |= TCL_ENCODING_END; statePtr->flags &= ~(INPUT_SAW_CR | INPUT_NEED_NL); return 1; } *srcLenPtr = srcLen; return 0; } /* *---------------------------------------------------------------------- * * Tcl_Ungets -- * * Causes the supplied string to be added to the input queue of * the channel, at either the head or tail of the queue. * * Results: * The number of bytes stored in the channel, or -1 on error. * * Side effects: * Adds input to the input queue of a channel. * *---------------------------------------------------------------------- */ int Tcl_Ungets(chan, str, len, atEnd) Tcl_Channel chan; /* The channel for which to add the input. */ CONST char *str; /* The input itself. */ int len; /* The length of the input. */ int atEnd; /* If non-zero, add at end of queue; otherwise * add at head of queue. */ { Channel *chanPtr; /* The real IO channel. */ ChannelState *statePtr; /* State of actual channel. */ ChannelBuffer *bufPtr; /* Buffer to contain the data. */ int i, flags; chanPtr = (Channel *) chan; statePtr = chanPtr->state; /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; /* * CheckChannelErrors clears too many flag bits in this one case. */ flags = statePtr->flags; if (CheckChannelErrors(statePtr, TCL_READABLE) != 0) { len = -1; goto done; } statePtr->flags = flags; /* * If we have encountered a sticky EOF, just punt without storing. * (sticky EOF is set if we have seen the input eofChar, to prevent * reading beyond the eofChar). Otherwise, clear the EOF flags, and * clear the BLOCKED bit. We want to discover these conditions anew * in each operation. */ if (statePtr->flags & CHANNEL_STICKY_EOF) { goto done; } statePtr->flags &= (~(CHANNEL_BLOCKED | CHANNEL_EOF)); bufPtr = AllocChannelBuffer(len); for (i = 0; i < len; i++) { bufPtr->buf[bufPtr->nextAdded++] = str[i]; } if (statePtr->inQueueHead == (ChannelBuffer *) NULL) { bufPtr->nextPtr = (ChannelBuffer *) NULL; statePtr->inQueueHead = bufPtr; statePtr->inQueueTail = bufPtr; } else if (atEnd) { bufPtr->nextPtr = (ChannelBuffer *) NULL; statePtr->inQueueTail->nextPtr = bufPtr; statePtr->inQueueTail = bufPtr; } else { bufPtr->nextPtr = statePtr->inQueueHead; statePtr->inQueueHead = bufPtr; } done: /* * Update the notifier state so we don't block while there is still * data in the buffers. */ UpdateInterest(chanPtr); return len; } /* *---------------------------------------------------------------------- * * Tcl_Flush -- * * Flushes output data on a channel. * * Results: * A standard Tcl result. * * Side effects: * May flush output queued on this channel. * *---------------------------------------------------------------------- */ int Tcl_Flush(chan) Tcl_Channel chan; /* The Channel to flush. */ { int result; /* Of calling FlushChannel. */ Channel *chanPtr = (Channel *) chan; /* The actual channel. */ ChannelState *statePtr = chanPtr->state; /* State of actual channel. */ /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; if (CheckChannelErrors(statePtr, TCL_WRITABLE) != 0) { return -1; } /* * Force current output buffer to be output also. */ if ((statePtr->curOutPtr != NULL) && (statePtr->curOutPtr->nextAdded > 0)) { statePtr->flags |= BUFFER_READY; } result = FlushChannel(NULL, chanPtr, 0); if (result != 0) { return TCL_ERROR; } return TCL_OK; } /* *---------------------------------------------------------------------- * * DiscardInputQueued -- * * Discards any input read from the channel but not yet consumed * by Tcl reading commands. * * Results: * None. * * Side effects: * May discard input from the channel. If discardLastBuffer is zero, * leaves one buffer in place for back-filling. * *---------------------------------------------------------------------- */ static void DiscardInputQueued(statePtr, discardSavedBuffers) ChannelState *statePtr; /* Channel on which to discard * the queued input. */ int discardSavedBuffers; /* If non-zero, discard all buffers including * last one. */ { ChannelBuffer *bufPtr, *nxtPtr; /* Loop variables. */ bufPtr = statePtr->inQueueHead; statePtr->inQueueHead = (ChannelBuffer *) NULL; statePtr->inQueueTail = (ChannelBuffer *) NULL; for (; bufPtr != (ChannelBuffer *) NULL; bufPtr = nxtPtr) { nxtPtr = bufPtr->nextPtr; RecycleBuffer(statePtr, bufPtr, discardSavedBuffers); } /* * If discardSavedBuffers is nonzero, must also discard any previously * saved buffer in the saveInBufPtr field. */ if (discardSavedBuffers) { if (statePtr->saveInBufPtr != (ChannelBuffer *) NULL) { ckfree((char *) statePtr->saveInBufPtr); statePtr->saveInBufPtr = (ChannelBuffer *) NULL; } } } /* *--------------------------------------------------------------------------- * * GetInput -- * * Reads input data from a device into a channel buffer. * * Results: * The return value is the Posix error code if an error occurred while * reading from the file, or 0 otherwise. * * Side effects: * Reads from the underlying device. * *--------------------------------------------------------------------------- */ static int GetInput(chanPtr) Channel *chanPtr; /* Channel to read input from. */ { int toRead; /* How much to read? */ int result; /* Of calling driver. */ int nread; /* How much was read from channel? */ ChannelBuffer *bufPtr; /* New buffer to add to input queue. */ ChannelState *statePtr = chanPtr->state; /* state info for channel */ /* * Prevent reading from a dead channel -- a channel that has been closed * but not yet deallocated, which can happen if the exit handler for * channel cleanup has run but the channel is still registered in some * interpreter. */ if (CheckForDeadChannel(NULL, statePtr)) { return EINVAL; } /* * First check for more buffers in the pushback area of the * topmost channel in the stack and use them. They can be the * result of a transformation which went away without reading all * the information placed in the area when it was stacked. * * Two possibilities for the state: No buffers in it, or a single * empty buffer. In the latter case we can recycle it now. */ if (chanPtr->inQueueHead != (ChannelBuffer*) NULL) { if (statePtr->inQueueHead != (ChannelBuffer*) NULL) { RecycleBuffer(statePtr, statePtr->inQueueHead, 0); statePtr->inQueueHead = (ChannelBuffer*) NULL; } statePtr->inQueueHead = chanPtr->inQueueHead; statePtr->inQueueTail = chanPtr->inQueueTail; chanPtr->inQueueHead = (ChannelBuffer*) NULL; chanPtr->inQueueTail = (ChannelBuffer*) NULL; return 0; } /* * Nothing in the pushback area, fall back to the usual handling * (driver, etc.) */ /* * See if we can fill an existing buffer. If we can, read only * as much as will fit in it. Otherwise allocate a new buffer, * add it to the input queue and attempt to fill it to the max. */ bufPtr = statePtr->inQueueTail; if ((bufPtr != NULL) && (bufPtr->nextAdded < bufPtr->bufLength)) { toRead = bufPtr->bufLength - bufPtr->nextAdded; } else { bufPtr = statePtr->saveInBufPtr; statePtr->saveInBufPtr = NULL; /* * Check the actual buffersize against the requested * buffersize. Buffers which are smaller than requested are * squashed. This is done to honor dynamic changes of the * buffersize made by the user. */ if ((bufPtr != NULL) && ((bufPtr->bufLength - BUFFER_PADDING) < statePtr->bufSize)) { ckfree((char *) bufPtr); bufPtr = NULL; } if (bufPtr == NULL) { bufPtr = AllocChannelBuffer(statePtr->bufSize); } bufPtr->nextPtr = (ChannelBuffer *) NULL; /* SF #427196: Use the actual size of the buffer to determine * the number of bytes to read from the channel and not the * size for new buffers. They can be different if the * buffersize was changed between reads. * * Note: This affects performance negatively if the buffersize * was extended but this small buffer is reused for all * subsequent reads. The system never uses buffers with the * requested bigger size in that case. An adjunct patch could * try and delete all unused buffers it encounters and which * are smaller than the formally requested buffersize. */ toRead = bufPtr->bufLength - bufPtr->nextAdded; if (statePtr->inQueueTail == NULL) { statePtr->inQueueHead = bufPtr; } else { statePtr->inQueueTail->nextPtr = bufPtr; } statePtr->inQueueTail = bufPtr; } /* * If EOF is set, we should avoid calling the driver because on some * platforms it is impossible to read from a device after EOF. */ if (statePtr->flags & CHANNEL_EOF) { return 0; } #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING /* [SF Tcl Bug 943274]. Better emulation of non-blocking channels * for channels without BlockModeProc, by keeping track of true * fileevents generated by the OS == Data waiting and reading if * and only if we are sure to have data. */ if ((statePtr->flags & CHANNEL_NONBLOCKING) && (Tcl_ChannelBlockModeProc(chanPtr->typePtr) == NULL) && !(statePtr->flags & CHANNEL_HAS_MORE_DATA)) { /* Bypass the driver, it would block, as no data is available */ nread = -1; result = EWOULDBLOCK; } else { #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ nread = (chanPtr->typePtr->inputProc)(chanPtr->instanceData, bufPtr->buf + bufPtr->nextAdded, toRead, &result); #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING } #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ if (nread > 0) { bufPtr->nextAdded += nread; /* * If we get a short read, signal up that we may be BLOCKED. We * should avoid calling the driver because on some platforms we * will block in the low level reading code even though the * channel is set into nonblocking mode. */ if (nread < toRead) { statePtr->flags |= CHANNEL_BLOCKED; } #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING if (nread <= toRead) { /* [SF Tcl Bug 943274] We have read the available data, * clear flag */ statePtr->flags &= ~CHANNEL_HAS_MORE_DATA; } #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ } else if (nread == 0) { statePtr->flags |= CHANNEL_EOF; statePtr->inputEncodingFlags |= TCL_ENCODING_END; } else if (nread < 0) { if ((result == EWOULDBLOCK) || (result == EAGAIN)) { statePtr->flags |= CHANNEL_BLOCKED; result = EAGAIN; } Tcl_SetErrno(result); return result; } return 0; } /* *---------------------------------------------------------------------- * * Tcl_Seek -- * * Implements seeking on Tcl Channels. This is a public function * so that other C facilities may be implemented on top of it. * * Results: * The new access point or -1 on error. If error, use Tcl_GetErrno() * to retrieve the POSIX error code for the error that occurred. * * Side effects: * May flush output on the channel. May discard queued input. * *---------------------------------------------------------------------- */ Tcl_WideInt Tcl_Seek(chan, offset, mode) Tcl_Channel chan; /* The channel on which to seek. */ Tcl_WideInt offset; /* Offset to seek to. */ int mode; /* Relative to which location to seek? */ { Channel *chanPtr = (Channel *) chan; /* The real IO channel. */ ChannelState *statePtr = chanPtr->state; /* state info for channel */ int inputBuffered, outputBuffered; /* # bytes held in buffers. */ int result; /* Of device driver operations. */ Tcl_WideInt curPos; /* Position on the device. */ int wasAsync; /* Was the channel nonblocking before the * seek operation? If so, must restore to * nonblocking mode after the seek. */ if (CheckChannelErrors(statePtr, TCL_WRITABLE | TCL_READABLE) != 0) { return Tcl_LongAsWide(-1); } /* * Disallow seek on dead channels -- channels that have been closed but * not yet been deallocated. Such channels can be found if the exit * handler for channel cleanup has run but the channel is still * registered in an interpreter. */ if (CheckForDeadChannel(NULL, statePtr)) { return Tcl_LongAsWide(-1); } /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; /* * Disallow seek on channels whose type does not have a seek procedure * defined. This means that the channel does not support seeking. */ if (chanPtr->typePtr->seekProc == (Tcl_DriverSeekProc *) NULL) { Tcl_SetErrno(EINVAL); return Tcl_LongAsWide(-1); } /* * Compute how much input and output is buffered. If both input and * output is buffered, cannot compute the current position. */ inputBuffered = Tcl_InputBuffered(chan); outputBuffered = Tcl_OutputBuffered(chan); if ((inputBuffered != 0) && (outputBuffered != 0)) { Tcl_SetErrno(EFAULT); return Tcl_LongAsWide(-1); } /* * If we are seeking relative to the current position, compute the * corrected offset taking into account the amount of unread input. */ if (mode == SEEK_CUR) { offset -= inputBuffered; } /* * Discard any queued input - this input should not be read after * the seek. */ DiscardInputQueued(statePtr, 0); /* * Reset EOF and BLOCKED flags. We invalidate them by moving the * access point. Also clear CR related flags. */ statePtr->flags &= (~(CHANNEL_EOF | CHANNEL_STICKY_EOF | CHANNEL_BLOCKED | INPUT_SAW_CR)); /* * If the channel is in asynchronous output mode, switch it back * to synchronous mode and cancel any async flush that may be * scheduled. After the flush, the channel will be put back into * asynchronous output mode. */ wasAsync = 0; if (statePtr->flags & CHANNEL_NONBLOCKING) { wasAsync = 1; result = StackSetBlockMode(chanPtr, TCL_MODE_BLOCKING); if (result != 0) { return Tcl_LongAsWide(-1); } statePtr->flags &= (~(CHANNEL_NONBLOCKING)); if (statePtr->flags & BG_FLUSH_SCHEDULED) { statePtr->flags &= (~(BG_FLUSH_SCHEDULED)); } } /* * If the flush fails we cannot recover the original position. In * that case the seek is not attempted because we do not know where * the access position is - instead we return the error. FlushChannel * has already called Tcl_SetErrno() to report the error upwards. * If the flush succeeds we do the seek also. */ if (FlushChannel(NULL, chanPtr, 0) != 0) { curPos = -1; } else { /* * Now seek to the new position in the channel as requested by the * caller. Note that we prefer the wideSeekProc if that is * available and non-NULL... */ if (HaveVersion(chanPtr->typePtr, TCL_CHANNEL_VERSION_3) && chanPtr->typePtr->wideSeekProc != NULL) { curPos = (chanPtr->typePtr->wideSeekProc) (chanPtr->instanceData, offset, mode, &result); } else if (offset < Tcl_LongAsWide(LONG_MIN) || offset > Tcl_LongAsWide(LONG_MAX)) { result = EOVERFLOW; curPos = Tcl_LongAsWide(-1); } else { curPos = Tcl_LongAsWide((chanPtr->typePtr->seekProc) ( chanPtr->instanceData, Tcl_WideAsLong(offset), mode, &result)); } if (curPos == Tcl_LongAsWide(-1)) { Tcl_SetErrno(result); } } /* * Restore to nonblocking mode if that was the previous behavior. * * NOTE: Even if there was an async flush active we do not restore * it now because we already flushed all the queued output, above. */ if (wasAsync) { statePtr->flags |= CHANNEL_NONBLOCKING; result = StackSetBlockMode(chanPtr, TCL_MODE_NONBLOCKING); if (result != 0) { return Tcl_LongAsWide(-1); } } return curPos; } /* *---------------------------------------------------------------------- * * Tcl_Tell -- * * Returns the position of the next character to be read/written on * this channel. * * Results: * A nonnegative integer on success, -1 on failure. If failed, * use Tcl_GetErrno() to retrieve the POSIX error code for the * error that occurred. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_WideInt Tcl_Tell(chan) Tcl_Channel chan; /* The channel to return pos for. */ { Channel *chanPtr = (Channel *) chan; /* The real IO channel. */ ChannelState *statePtr = chanPtr->state; /* state info for channel */ int inputBuffered, outputBuffered; /* # bytes held in buffers. */ int result; /* Of calling device driver. */ Tcl_WideInt curPos; /* Position on device. */ if (CheckChannelErrors(statePtr, TCL_WRITABLE | TCL_READABLE) != 0) { return Tcl_LongAsWide(-1); } /* * Disallow tell on dead channels -- channels that have been closed but * not yet been deallocated. Such channels can be found if the exit * handler for channel cleanup has run but the channel is still * registered in an interpreter. */ if (CheckForDeadChannel(NULL, statePtr)) { return Tcl_LongAsWide(-1); } /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; /* * Disallow tell on channels whose type does not have a seek procedure * defined. This means that the channel does not support seeking. */ if (chanPtr->typePtr->seekProc == (Tcl_DriverSeekProc *) NULL) { Tcl_SetErrno(EINVAL); return Tcl_LongAsWide(-1); } /* * Compute how much input and output is buffered. If both input and * output is buffered, cannot compute the current position. */ inputBuffered = Tcl_InputBuffered(chan); outputBuffered = Tcl_OutputBuffered(chan); if ((inputBuffered != 0) && (outputBuffered != 0)) { Tcl_SetErrno(EFAULT); return Tcl_LongAsWide(-1); } /* * Get the current position in the device and compute the position * where the next character will be read or written. Note that we * prefer the wideSeekProc if that is available and non-NULL... */ if (HaveVersion(chanPtr->typePtr, TCL_CHANNEL_VERSION_3) && chanPtr->typePtr->wideSeekProc != NULL) { curPos = (chanPtr->typePtr->wideSeekProc) (chanPtr->instanceData, Tcl_LongAsWide(0), SEEK_CUR, &result); } else { curPos = Tcl_LongAsWide((chanPtr->typePtr->seekProc) ( chanPtr->instanceData, 0, SEEK_CUR, &result)); } if (curPos == Tcl_LongAsWide(-1)) { Tcl_SetErrno(result); return Tcl_LongAsWide(-1); } if (inputBuffered != 0) { return curPos - inputBuffered; } return curPos + outputBuffered; } /* *--------------------------------------------------------------------------- * * Tcl_SeekOld, Tcl_TellOld -- * * Backward-compatability versions of the seek/tell interface that * do not support 64-bit offsets. This interface is not documented * or expected to be supported indefinitely. * * Results: * As for Tcl_Seek and Tcl_Tell respectively, except truncated to * whatever value will fit in an 'int'. * * Side effects: * As for Tcl_Seek and Tcl_Tell respectively. * *--------------------------------------------------------------------------- */ int Tcl_SeekOld(chan, offset, mode) Tcl_Channel chan; /* The channel on which to seek. */ int offset; /* Offset to seek to. */ int mode; /* Relative to which location to seek? */ { Tcl_WideInt wOffset, wResult; wOffset = Tcl_LongAsWide((long)offset); wResult = Tcl_Seek(chan, wOffset, mode); return (int)Tcl_WideAsLong(wResult); } int Tcl_TellOld(chan) Tcl_Channel chan; /* The channel to return pos for. */ { Tcl_WideInt wResult; wResult = Tcl_Tell(chan); return (int)Tcl_WideAsLong(wResult); } /* *--------------------------------------------------------------------------- * * CheckChannelErrors -- * * See if the channel is in an ready state and can perform the * desired operation. * * Results: * The return value is 0 if the channel is OK, otherwise the * return value is -1 and errno is set to indicate the error. * * Side effects: * May clear the EOF and/or BLOCKED bits if reading from channel. * *--------------------------------------------------------------------------- */ static int CheckChannelErrors(statePtr, flags) ChannelState *statePtr; /* Channel to check. */ int flags; /* Test if channel supports desired operation: * TCL_READABLE, TCL_WRITABLE. Also indicates * Raw read or write for special close * processing*/ { int direction = flags & (TCL_READABLE|TCL_WRITABLE); /* * Check for unreported error. */ if (statePtr->unreportedError != 0) { Tcl_SetErrno(statePtr->unreportedError); statePtr->unreportedError = 0; return -1; } /* * Only the raw read and write operations are allowed during close * in order to drain data from stacked channels. */ if ((statePtr->flags & CHANNEL_CLOSED) && ((flags & CHANNEL_RAW_MODE) == 0)) { Tcl_SetErrno(EACCES); return -1; } /* * Fail if the channel is not opened for desired operation. */ if ((statePtr->flags & direction) == 0) { Tcl_SetErrno(EACCES); return -1; } /* * Fail if the channel is in the middle of a background copy. * * Don't do this tests for raw channels here or else the chaining in the * transformation drivers will fail with 'file busy' error instead of * retrieving and transforming the data to copy. */ if ((statePtr->csPtr != NULL) && ((flags & CHANNEL_RAW_MODE) == 0)) { Tcl_SetErrno(EBUSY); return -1; } if (direction == TCL_READABLE) { /* * If we have not encountered a sticky EOF, clear the EOF bit * (sticky EOF is set if we have seen the input eofChar, to prevent * reading beyond the eofChar). Also, always clear the BLOCKED bit. * We want to discover these conditions anew in each operation. */ if ((statePtr->flags & CHANNEL_STICKY_EOF) == 0) { statePtr->flags &= ~CHANNEL_EOF; } statePtr->flags &= ~(CHANNEL_BLOCKED | CHANNEL_NEED_MORE_DATA); } return 0; } /* *---------------------------------------------------------------------- * * Tcl_Eof -- * * Returns 1 if the channel is at EOF, 0 otherwise. * * Results: * 1 or 0, always. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_Eof(chan) Tcl_Channel chan; /* Does this channel have EOF? */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of real channel structure. */ return ((statePtr->flags & CHANNEL_STICKY_EOF) || ((statePtr->flags & CHANNEL_EOF) && (Tcl_InputBuffered(chan) == 0))) ? 1 : 0; } /* *---------------------------------------------------------------------- * * Tcl_InputBlocked -- * * Returns 1 if input is blocked on this channel, 0 otherwise. * * Results: * 0 or 1, always. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_InputBlocked(chan) Tcl_Channel chan; /* Is this channel blocked? */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of real channel structure. */ return (statePtr->flags & CHANNEL_BLOCKED) ? 1 : 0; } /* *---------------------------------------------------------------------- * * Tcl_InputBuffered -- * * Returns the number of bytes of input currently buffered in the * common internal buffer of a channel. * * Results: * The number of input bytes buffered, or zero if the channel is not * open for reading. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_InputBuffered(chan) Tcl_Channel chan; /* The channel to query. */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of real channel structure. */ ChannelBuffer *bufPtr; int bytesBuffered; for (bytesBuffered = 0, bufPtr = statePtr->inQueueHead; bufPtr != (ChannelBuffer *) NULL; bufPtr = bufPtr->nextPtr) { bytesBuffered += (bufPtr->nextAdded - bufPtr->nextRemoved); } /* * Don't forget the bytes in the topmost pushback area. */ for (bufPtr = statePtr->topChanPtr->inQueueHead; bufPtr != (ChannelBuffer *) NULL; bufPtr = bufPtr->nextPtr) { bytesBuffered += (bufPtr->nextAdded - bufPtr->nextRemoved); } return bytesBuffered; } /* *---------------------------------------------------------------------- * * Tcl_OutputBuffered -- * * Returns the number of bytes of output currently buffered in the * common internal buffer of a channel. * * Results: * The number of output bytes buffered, or zero if the channel is not * open for writing. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_OutputBuffered(chan) Tcl_Channel chan; /* The channel to query. */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of real channel structure. */ ChannelBuffer *bufPtr; int bytesBuffered; for (bytesBuffered = 0, bufPtr = statePtr->outQueueHead; bufPtr != (ChannelBuffer *) NULL; bufPtr = bufPtr->nextPtr) { bytesBuffered += (bufPtr->nextAdded - bufPtr->nextRemoved); } if ((statePtr->curOutPtr != (ChannelBuffer *) NULL) && (statePtr->curOutPtr->nextAdded > statePtr->curOutPtr->nextRemoved)) { statePtr->flags |= BUFFER_READY; bytesBuffered += (statePtr->curOutPtr->nextAdded - statePtr->curOutPtr->nextRemoved); } return bytesBuffered; } /* *---------------------------------------------------------------------- * * Tcl_ChannelBuffered -- * * Returns the number of bytes of input currently buffered in the * internal buffer (push back area) of a channel. * * Results: * The number of input bytes buffered, or zero if the channel is not * open for reading. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_ChannelBuffered(chan) Tcl_Channel chan; /* The channel to query. */ { Channel *chanPtr = (Channel *) chan; /* real channel structure. */ ChannelBuffer *bufPtr; int bytesBuffered; for (bytesBuffered = 0, bufPtr = chanPtr->inQueueHead; bufPtr != (ChannelBuffer *) NULL; bufPtr = bufPtr->nextPtr) { bytesBuffered += (bufPtr->nextAdded - bufPtr->nextRemoved); } return bytesBuffered; } /* *---------------------------------------------------------------------- * * Tcl_SetChannelBufferSize -- * * Sets the size of buffers to allocate to store input or output * in the channel. The size must be between 1 byte and 1 MByte. * * Results: * None. * * Side effects: * Sets the size of buffers subsequently allocated for this channel. * *---------------------------------------------------------------------- */ void Tcl_SetChannelBufferSize(chan, sz) Tcl_Channel chan; /* The channel whose buffer size * to set. */ int sz; /* The size to set. */ { ChannelState *statePtr; /* State of real channel structure. */ /* * If the buffer size is smaller than 1 byte or larger than one MByte, * do not accept the requested size and leave the current buffer size. */ if (sz < 1) { return; } if (sz > (1024 * 1024)) { return; } statePtr = ((Channel *) chan)->state; statePtr->bufSize = sz; if (statePtr->outputStage != NULL) { ckfree((char *) statePtr->outputStage); statePtr->outputStage = NULL; } if ((statePtr->encoding != NULL) && (statePtr->flags & TCL_WRITABLE)) { statePtr->outputStage = (char *) ckalloc((unsigned) (statePtr->bufSize + 2)); } } /* *---------------------------------------------------------------------- * * Tcl_GetChannelBufferSize -- * * Retrieves the size of buffers to allocate for this channel. * * Results: * The size. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_GetChannelBufferSize(chan) Tcl_Channel chan; /* The channel for which to find the * buffer size. */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of real channel structure. */ return statePtr->bufSize; } /* *---------------------------------------------------------------------- * * Tcl_BadChannelOption -- * * This procedure generates a "bad option" error message in an * (optional) interpreter. It is used by channel drivers when * a invalid Set/Get option is requested. Its purpose is to concatenate * the generic options list to the specific ones and factorize * the generic options error message string. * * Results: * TCL_ERROR. * * Side effects: * An error message is generated in interp's result object to * indicate that a command was invoked with the a bad option * The message has the form * bad option "blah": should be one of * <...generic options...>+<...specific options...> * "blah" is the optionName argument and "" * is a space separated list of specific option words. * The function takes good care of inserting minus signs before * each option, commas after, and an "or" before the last option. * *---------------------------------------------------------------------- */ int Tcl_BadChannelOption(interp, optionName, optionList) Tcl_Interp *interp; /* Current interpreter. (can be NULL)*/ CONST char *optionName; /* 'bad option' name */ CONST char *optionList; /* Specific options list to append * to the standard generic options. * can be NULL for generic options * only. */ { if (interp) { CONST char *genericopt = "blocking buffering buffersize encoding eofchar translation"; CONST char **argv; int argc, i; Tcl_DString ds; Tcl_DStringInit(&ds); Tcl_DStringAppend(&ds, genericopt, -1); if (optionList && (*optionList)) { Tcl_DStringAppend(&ds, " ", 1); Tcl_DStringAppend(&ds, optionList, -1); } if (Tcl_SplitList(interp, Tcl_DStringValue(&ds), &argc, &argv) != TCL_OK) { panic("malformed option list in channel driver"); } Tcl_ResetResult(interp); Tcl_AppendResult(interp, "bad option \"", optionName, "\": should be one of ", (char *) NULL); argc--; for (i = 0; i < argc; i++) { Tcl_AppendResult(interp, "-", argv[i], ", ", (char *) NULL); } Tcl_AppendResult(interp, "or -", argv[i], (char *) NULL); Tcl_DStringFree(&ds); ckfree((char *) argv); } Tcl_SetErrno(EINVAL); return TCL_ERROR; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelOption -- * * Gets a mode associated with an IO channel. If the optionName arg * is non NULL, retrieves the value of that option. If the optionName * arg is NULL, retrieves a list of alternating option names and * values for the given channel. * * Results: * A standard Tcl result. Also sets the supplied DString to the * string value of the option(s) returned. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_GetChannelOption(interp, chan, optionName, dsPtr) Tcl_Interp *interp; /* For error reporting - can be NULL. */ Tcl_Channel chan; /* Channel on which to get option. */ CONST char *optionName; /* Option to get. */ Tcl_DString *dsPtr; /* Where to store value(s). */ { size_t len; /* Length of optionName string. */ char optionVal[128]; /* Buffer for sprintf. */ Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* state info for channel */ int flags; /* * Disallow options on dead channels -- channels that have been closed but * not yet been deallocated. Such channels can be found if the exit * handler for channel cleanup has run but the channel is still * registered in an interpreter. */ if (CheckForDeadChannel(interp, statePtr)) { return TCL_ERROR; } /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; /* * If we are in the middle of a background copy, use the saved flags. */ if (statePtr->csPtr) { if (chanPtr == statePtr->csPtr->readPtr) { flags = statePtr->csPtr->readFlags; } else { flags = statePtr->csPtr->writeFlags; } } else { flags = statePtr->flags; } /* * If the optionName is NULL it means that we want a list of all * options and values. */ if (optionName == (char *) NULL) { len = 0; } else { len = strlen(optionName); } if ((len == 0) || ((len > 2) && (optionName[1] == 'b') && (strncmp(optionName, "-blocking", len) == 0))) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-blocking"); } Tcl_DStringAppendElement(dsPtr, (flags & CHANNEL_NONBLOCKING) ? "0" : "1"); if (len > 0) { return TCL_OK; } } if ((len == 0) || ((len > 7) && (optionName[1] == 'b') && (strncmp(optionName, "-buffering", len) == 0))) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-buffering"); } if (flags & CHANNEL_LINEBUFFERED) { Tcl_DStringAppendElement(dsPtr, "line"); } else if (flags & CHANNEL_UNBUFFERED) { Tcl_DStringAppendElement(dsPtr, "none"); } else { Tcl_DStringAppendElement(dsPtr, "full"); } if (len > 0) { return TCL_OK; } } if ((len == 0) || ((len > 7) && (optionName[1] == 'b') && (strncmp(optionName, "-buffersize", len) == 0))) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-buffersize"); } TclFormatInt(optionVal, statePtr->bufSize); Tcl_DStringAppendElement(dsPtr, optionVal); if (len > 0) { return TCL_OK; } } if ((len == 0) || ((len > 2) && (optionName[1] == 'e') && (strncmp(optionName, "-encoding", len) == 0))) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-encoding"); } if (statePtr->encoding == NULL) { Tcl_DStringAppendElement(dsPtr, "binary"); } else { Tcl_DStringAppendElement(dsPtr, Tcl_GetEncodingName(statePtr->encoding)); } if (len > 0) { return TCL_OK; } } if ((len == 0) || ((len > 2) && (optionName[1] == 'e') && (strncmp(optionName, "-eofchar", len) == 0))) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-eofchar"); } if (((flags & (TCL_READABLE|TCL_WRITABLE)) == (TCL_READABLE|TCL_WRITABLE)) && (len == 0)) { Tcl_DStringStartSublist(dsPtr); } if (flags & TCL_READABLE) { if (statePtr->inEofChar == 0) { Tcl_DStringAppendElement(dsPtr, ""); } else { char buf[4]; sprintf(buf, "%c", statePtr->inEofChar); Tcl_DStringAppendElement(dsPtr, buf); } } if (flags & TCL_WRITABLE) { if (statePtr->outEofChar == 0) { Tcl_DStringAppendElement(dsPtr, ""); } else { char buf[4]; sprintf(buf, "%c", statePtr->outEofChar); Tcl_DStringAppendElement(dsPtr, buf); } } if ( !(flags & (TCL_READABLE|TCL_WRITABLE))) { /* Not readable or writable (server socket) */ Tcl_DStringAppendElement(dsPtr, ""); } if (((flags & (TCL_READABLE|TCL_WRITABLE)) == (TCL_READABLE|TCL_WRITABLE)) && (len == 0)) { Tcl_DStringEndSublist(dsPtr); } if (len > 0) { return TCL_OK; } } if ((len == 0) || ((len > 1) && (optionName[1] == 't') && (strncmp(optionName, "-translation", len) == 0))) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-translation"); } if (((flags & (TCL_READABLE|TCL_WRITABLE)) == (TCL_READABLE|TCL_WRITABLE)) && (len == 0)) { Tcl_DStringStartSublist(dsPtr); } if (flags & TCL_READABLE) { if (statePtr->inputTranslation == TCL_TRANSLATE_AUTO) { Tcl_DStringAppendElement(dsPtr, "auto"); } else if (statePtr->inputTranslation == TCL_TRANSLATE_CR) { Tcl_DStringAppendElement(dsPtr, "cr"); } else if (statePtr->inputTranslation == TCL_TRANSLATE_CRLF) { Tcl_DStringAppendElement(dsPtr, "crlf"); } else { Tcl_DStringAppendElement(dsPtr, "lf"); } } if (flags & TCL_WRITABLE) { if (statePtr->outputTranslation == TCL_TRANSLATE_AUTO) { Tcl_DStringAppendElement(dsPtr, "auto"); } else if (statePtr->outputTranslation == TCL_TRANSLATE_CR) { Tcl_DStringAppendElement(dsPtr, "cr"); } else if (statePtr->outputTranslation == TCL_TRANSLATE_CRLF) { Tcl_DStringAppendElement(dsPtr, "crlf"); } else { Tcl_DStringAppendElement(dsPtr, "lf"); } } if ( !(flags & (TCL_READABLE|TCL_WRITABLE))) { /* Not readable or writable (server socket) */ Tcl_DStringAppendElement(dsPtr, "auto"); } if (((flags & (TCL_READABLE|TCL_WRITABLE)) == (TCL_READABLE|TCL_WRITABLE)) && (len == 0)) { Tcl_DStringEndSublist(dsPtr); } if (len > 0) { return TCL_OK; } } if (chanPtr->typePtr->getOptionProc != (Tcl_DriverGetOptionProc *) NULL) { /* * let the driver specific handle additional options * and result code and message. */ return (chanPtr->typePtr->getOptionProc) (chanPtr->instanceData, interp, optionName, dsPtr); } else { /* * no driver specific options case. */ if (len == 0) { return TCL_OK; } return Tcl_BadChannelOption(interp, optionName, NULL); } } /* *--------------------------------------------------------------------------- * * Tcl_SetChannelOption -- * * Sets an option on a channel. * * Results: * A standard Tcl result. On error, sets interp's result object * if interp is not NULL. * * Side effects: * May modify an option on a device. * *--------------------------------------------------------------------------- */ int Tcl_SetChannelOption(interp, chan, optionName, newValue) Tcl_Interp *interp; /* For error reporting - can be NULL. */ Tcl_Channel chan; /* Channel on which to set mode. */ CONST char *optionName; /* Which option to set? */ CONST char *newValue; /* New value for option. */ { Channel *chanPtr = (Channel *) chan; /* The real IO channel. */ ChannelState *statePtr = chanPtr->state; /* state info for channel */ size_t len; /* Length of optionName string. */ int argc; CONST char **argv; /* * If the channel is in the middle of a background copy, fail. */ if (statePtr->csPtr) { if (interp) { Tcl_AppendResult(interp, "unable to set channel options: background copy in progress", (char *) NULL); } return TCL_ERROR; } /* * Disallow options on dead channels -- channels that have been closed but * not yet been deallocated. Such channels can be found if the exit * handler for channel cleanup has run but the channel is still * registered in an interpreter. */ if (CheckForDeadChannel(NULL, statePtr)) { return TCL_ERROR; } /* * This operation should occur at the top of a channel stack. */ chanPtr = statePtr->topChanPtr; len = strlen(optionName); if ((len > 2) && (optionName[1] == 'b') && (strncmp(optionName, "-blocking", len) == 0)) { int newMode; if (Tcl_GetBoolean(interp, newValue, &newMode) == TCL_ERROR) { return TCL_ERROR; } if (newMode) { newMode = TCL_MODE_BLOCKING; } else { newMode = TCL_MODE_NONBLOCKING; } return SetBlockMode(interp, chanPtr, newMode); } else if ((len > 7) && (optionName[1] == 'b') && (strncmp(optionName, "-buffering", len) == 0)) { len = strlen(newValue); if ((newValue[0] == 'f') && (strncmp(newValue, "full", len) == 0)) { statePtr->flags &= (~(CHANNEL_UNBUFFERED|CHANNEL_LINEBUFFERED)); } else if ((newValue[0] == 'l') && (strncmp(newValue, "line", len) == 0)) { statePtr->flags &= (~(CHANNEL_UNBUFFERED)); statePtr->flags |= CHANNEL_LINEBUFFERED; } else if ((newValue[0] == 'n') && (strncmp(newValue, "none", len) == 0)) { statePtr->flags &= (~(CHANNEL_LINEBUFFERED)); statePtr->flags |= CHANNEL_UNBUFFERED; } else { if (interp) { Tcl_AppendResult(interp, "bad value for -buffering: ", "must be one of full, line, or none", (char *) NULL); return TCL_ERROR; } } return TCL_OK; } else if ((len > 7) && (optionName[1] == 'b') && (strncmp(optionName, "-buffersize", len) == 0)) { int newBufferSize; if (Tcl_GetInt(interp, newValue, &newBufferSize) == TCL_ERROR) { return TCL_ERROR; } Tcl_SetChannelBufferSize(chan, newBufferSize); } else if ((len > 2) && (optionName[1] == 'e') && (strncmp(optionName, "-encoding", len) == 0)) { Tcl_Encoding encoding; if ((newValue[0] == '\0') || (strcmp(newValue, "binary") == 0)) { encoding = NULL; } else { encoding = Tcl_GetEncoding(interp, newValue); if (encoding == NULL) { return TCL_ERROR; } } /* * When the channel has an escape sequence driven encoding such as * iso2022, the terminated escape sequence must write to the buffer. */ if ((statePtr->encoding != NULL) && (statePtr->curOutPtr != NULL) && (CheckChannelErrors(statePtr, TCL_WRITABLE) == 0)) { statePtr->outputEncodingFlags |= TCL_ENCODING_END; WriteChars(chanPtr, "", 0); } Tcl_FreeEncoding(statePtr->encoding); statePtr->encoding = encoding; statePtr->inputEncodingState = NULL; statePtr->inputEncodingFlags = TCL_ENCODING_START; statePtr->outputEncodingState = NULL; statePtr->outputEncodingFlags = TCL_ENCODING_START; statePtr->flags &= ~CHANNEL_NEED_MORE_DATA; UpdateInterest(chanPtr); } else if ((len > 2) && (optionName[1] == 'e') && (strncmp(optionName, "-eofchar", len) == 0)) { if (Tcl_SplitList(interp, newValue, &argc, &argv) == TCL_ERROR) { return TCL_ERROR; } if (argc == 0) { statePtr->inEofChar = 0; statePtr->outEofChar = 0; } else if (argc == 1) { if (statePtr->flags & TCL_WRITABLE) { statePtr->outEofChar = (int) argv[0][0]; } if (statePtr->flags & TCL_READABLE) { statePtr->inEofChar = (int) argv[0][0]; } } else if (argc != 2) { if (interp) { Tcl_AppendResult(interp, "bad value for -eofchar: should be a list of zero,", " one, or two elements", (char *) NULL); } ckfree((char *) argv); return TCL_ERROR; } else { if (statePtr->flags & TCL_READABLE) { statePtr->inEofChar = (int) argv[0][0]; } if (statePtr->flags & TCL_WRITABLE) { statePtr->outEofChar = (int) argv[1][0]; } } if (argv != NULL) { ckfree((char *) argv); } /* * [SF Tcl Bug 930851] Reset EOF and BLOCKED flags. Changing * the character which signals eof can transform a current eof * condition into a 'go ahead'. Ditto for blocked. */ statePtr->flags &= (~(CHANNEL_EOF | CHANNEL_STICKY_EOF | CHANNEL_BLOCKED)); return TCL_OK; } else if ((len > 1) && (optionName[1] == 't') && (strncmp(optionName, "-translation", len) == 0)) { CONST char *readMode, *writeMode; if (Tcl_SplitList(interp, newValue, &argc, &argv) == TCL_ERROR) { return TCL_ERROR; } if (argc == 1) { readMode = (statePtr->flags & TCL_READABLE) ? argv[0] : NULL; writeMode = (statePtr->flags & TCL_WRITABLE) ? argv[0] : NULL; } else if (argc == 2) { readMode = (statePtr->flags & TCL_READABLE) ? argv[0] : NULL; writeMode = (statePtr->flags & TCL_WRITABLE) ? argv[1] : NULL; } else { if (interp) { Tcl_AppendResult(interp, "bad value for -translation: must be a one or two", " element list", (char *) NULL); } ckfree((char *) argv); return TCL_ERROR; } if (readMode) { TclEolTranslation translation; if (*readMode == '\0') { translation = statePtr->inputTranslation; } else if (strcmp(readMode, "auto") == 0) { translation = TCL_TRANSLATE_AUTO; } else if (strcmp(readMode, "binary") == 0) { translation = TCL_TRANSLATE_LF; statePtr->inEofChar = 0; Tcl_FreeEncoding(statePtr->encoding); statePtr->encoding = NULL; } else if (strcmp(readMode, "lf") == 0) { translation = TCL_TRANSLATE_LF; } else if (strcmp(readMode, "cr") == 0) { translation = TCL_TRANSLATE_CR; } else if (strcmp(readMode, "crlf") == 0) { translation = TCL_TRANSLATE_CRLF; } else if (strcmp(readMode, "platform") == 0) { translation = TCL_PLATFORM_TRANSLATION; } else { if (interp) { Tcl_AppendResult(interp, "bad value for -translation: ", "must be one of auto, binary, cr, lf, crlf,", " or platform", (char *) NULL); } ckfree((char *) argv); return TCL_ERROR; } /* * Reset the EOL flags since we need to look at any buffered * data to see if the new translation mode allows us to * complete the line. */ if (translation != statePtr->inputTranslation) { statePtr->inputTranslation = translation; statePtr->flags &= ~(INPUT_SAW_CR); statePtr->flags &= ~(CHANNEL_NEED_MORE_DATA); UpdateInterest(chanPtr); } } if (writeMode) { if (*writeMode == '\0') { /* Do nothing. */ } else if (strcmp(writeMode, "auto") == 0) { /* * This is a hack to get TCP sockets to produce output * in CRLF mode if they are being set into AUTO mode. * A better solution for achieving this effect will be * coded later. */ if (strcmp(Tcl_ChannelName(chanPtr->typePtr), "tcp") == 0) { statePtr->outputTranslation = TCL_TRANSLATE_CRLF; } else { statePtr->outputTranslation = TCL_PLATFORM_TRANSLATION; } } else if (strcmp(writeMode, "binary") == 0) { statePtr->outEofChar = 0; statePtr->outputTranslation = TCL_TRANSLATE_LF; Tcl_FreeEncoding(statePtr->encoding); statePtr->encoding = NULL; } else if (strcmp(writeMode, "lf") == 0) { statePtr->outputTranslation = TCL_TRANSLATE_LF; } else if (strcmp(writeMode, "cr") == 0) { statePtr->outputTranslation = TCL_TRANSLATE_CR; } else if (strcmp(writeMode, "crlf") == 0) { statePtr->outputTranslation = TCL_TRANSLATE_CRLF; } else if (strcmp(writeMode, "platform") == 0) { statePtr->outputTranslation = TCL_PLATFORM_TRANSLATION; } else { if (interp) { Tcl_AppendResult(interp, "bad value for -translation: ", "must be one of auto, binary, cr, lf, crlf,", " or platform", (char *) NULL); } ckfree((char *) argv); return TCL_ERROR; } } ckfree((char *) argv); return TCL_OK; } else if (chanPtr->typePtr->setOptionProc != NULL) { return (*chanPtr->typePtr->setOptionProc)(chanPtr->instanceData, interp, optionName, newValue); } else { return Tcl_BadChannelOption(interp, optionName, (char *) NULL); } /* * If bufsize changes, need to get rid of old utility buffer. */ if (statePtr->saveInBufPtr != NULL) { RecycleBuffer(statePtr, statePtr->saveInBufPtr, 1); statePtr->saveInBufPtr = NULL; } if (statePtr->inQueueHead != NULL) { if ((statePtr->inQueueHead->nextPtr == NULL) && (statePtr->inQueueHead->nextAdded == statePtr->inQueueHead->nextRemoved)) { RecycleBuffer(statePtr, statePtr->inQueueHead, 1); statePtr->inQueueHead = NULL; statePtr->inQueueTail = NULL; } } /* * If encoding or bufsize changes, need to update output staging buffer. */ if (statePtr->outputStage != NULL) { ckfree((char *) statePtr->outputStage); statePtr->outputStage = NULL; } if ((statePtr->encoding != NULL) && (statePtr->flags & TCL_WRITABLE)) { statePtr->outputStage = (char *) ckalloc((unsigned) (statePtr->bufSize + 2)); } return TCL_OK; } /* *---------------------------------------------------------------------- * * CleanupChannelHandlers -- * * Removes channel handlers that refer to the supplied interpreter, * so that if the actual channel is not closed now, these handlers * will not run on subsequent events on the channel. This would be * erroneous, because the interpreter no longer has a reference to * this channel. * * Results: * None. * * Side effects: * Removes channel handlers. * *---------------------------------------------------------------------- */ static void CleanupChannelHandlers(interp, chanPtr) Tcl_Interp *interp; Channel *chanPtr; { ChannelState *statePtr = chanPtr->state; /* state info for channel */ EventScriptRecord *sPtr, *prevPtr, *nextPtr; /* * Remove fileevent records on this channel that refer to the * given interpreter. */ for (sPtr = statePtr->scriptRecordPtr, prevPtr = (EventScriptRecord *) NULL; sPtr != (EventScriptRecord *) NULL; sPtr = nextPtr) { nextPtr = sPtr->nextPtr; if (sPtr->interp == interp) { if (prevPtr == (EventScriptRecord *) NULL) { statePtr->scriptRecordPtr = nextPtr; } else { prevPtr->nextPtr = nextPtr; } Tcl_DeleteChannelHandler((Tcl_Channel) chanPtr, TclChannelEventScriptInvoker, (ClientData) sPtr); Tcl_DecrRefCount(sPtr->scriptPtr); ckfree((char *) sPtr); } else { prevPtr = sPtr; } } } /* *---------------------------------------------------------------------- * * Tcl_NotifyChannel -- * * This procedure is called by a channel driver when a driver * detects an event on a channel. This procedure is responsible * for actually handling the event by invoking any channel * handler callbacks. * * Results: * None. * * Side effects: * Whatever the channel handler callback procedure does. * *---------------------------------------------------------------------- */ void Tcl_NotifyChannel(channel, mask) Tcl_Channel channel; /* Channel that detected an event. */ int mask; /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, or TCL_EXCEPTION: indicates * which events were detected. */ { Channel *chanPtr = (Channel *) channel; ChannelState *statePtr = chanPtr->state; /* state info for channel */ ChannelHandler *chPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); NextChannelHandler nh; Channel* upChanPtr; Tcl_ChannelType* upTypePtr; #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING /* [SF Tcl Bug 943274] * For a non-blocking channel without blockmodeproc we keep track * of actual input coming from the OS so that we can do a credible * imitation of non-blocking behaviour. */ if ((mask & TCL_READABLE) && (statePtr->flags & CHANNEL_NONBLOCKING) && (Tcl_ChannelBlockModeProc(chanPtr->typePtr) == NULL) && !(statePtr->flags & CHANNEL_TIMER_FEV)) { statePtr->flags |= CHANNEL_HAS_MORE_DATA; } #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ /* * In contrast to the other API functions this procedure walks towards * the top of a stack and not down from it. * * The channel calling this procedure is the one who generated the event, * and thus does not take part in handling it. IOW, its HandlerProc is * not called, instead we begin with the channel above it. * * This behaviour also allows the transformation channels to * generate their own events and pass them upward. */ while (mask && (chanPtr->upChanPtr != ((Channel*) NULL))) { Tcl_DriverHandlerProc* upHandlerProc; upChanPtr = chanPtr->upChanPtr; upTypePtr = upChanPtr->typePtr; upHandlerProc = Tcl_ChannelHandlerProc(upTypePtr); if (upHandlerProc != NULL) { mask = (*upHandlerProc) (upChanPtr->instanceData, mask); } /* ELSE: * Ignore transformations which are unable to handle the event * coming from below. Assume that they don't change the mask and * pass it on. */ chanPtr = upChanPtr; } channel = (Tcl_Channel) chanPtr; /* * Here we have either reached the top of the stack or the mask is * empty. We break out of the procedure if it is the latter. */ if (!mask) { return; } /* * We are now above the topmost channel in a stack and have events * left. Now call the channel handlers as usual. * * Preserve the channel struct in case the script closes it. */ Tcl_Preserve((ClientData) channel); Tcl_Preserve((ClientData) statePtr); /* * If we are flushing in the background, be sure to call FlushChannel * for writable events. Note that we have to discard the writable * event so we don't call any write handlers before the flush is * complete. */ if ((statePtr->flags & BG_FLUSH_SCHEDULED) && (mask & TCL_WRITABLE)) { FlushChannel(NULL, chanPtr, 1); mask &= ~TCL_WRITABLE; } /* * Add this invocation to the list of recursive invocations of * ChannelHandlerEventProc. */ nh.nextHandlerPtr = (ChannelHandler *) NULL; nh.nestedHandlerPtr = tsdPtr->nestedHandlerPtr; tsdPtr->nestedHandlerPtr = &nh; for (chPtr = statePtr->chPtr; chPtr != (ChannelHandler *) NULL; ) { /* * If this channel handler is interested in any of the events that * have occurred on the channel, invoke its procedure. */ if ((chPtr->mask & mask) != 0) { nh.nextHandlerPtr = chPtr->nextPtr; (*(chPtr->proc))(chPtr->clientData, mask); chPtr = nh.nextHandlerPtr; } else { chPtr = chPtr->nextPtr; } } /* * Update the notifier interest, since it may have changed after * invoking event handlers. Skip that if the channel was deleted * in the call to the channel handler. */ if (chanPtr->typePtr != NULL) { UpdateInterest(chanPtr); } Tcl_Release((ClientData) statePtr); Tcl_Release((ClientData) channel); tsdPtr->nestedHandlerPtr = nh.nestedHandlerPtr; } /* *---------------------------------------------------------------------- * * UpdateInterest -- * * Arrange for the notifier to call us back at appropriate times * based on the current state of the channel. * * Results: * None. * * Side effects: * May schedule a timer or driver handler. * *---------------------------------------------------------------------- */ static void UpdateInterest(chanPtr) Channel *chanPtr; /* Channel to update. */ { ChannelState *statePtr = chanPtr->state; /* state info for channel */ int mask = statePtr->interestMask; /* * If there are flushed buffers waiting to be written, then * we need to watch for the channel to become writable. */ if (statePtr->flags & BG_FLUSH_SCHEDULED) { mask |= TCL_WRITABLE; } /* * If there is data in the input queue, and we aren't waiting for more * data, then we need to schedule a timer so we don't block in the * notifier. Also, cancel the read interest so we don't get duplicate * events. */ if (mask & TCL_READABLE) { if (!(statePtr->flags & CHANNEL_NEED_MORE_DATA) && (statePtr->inQueueHead != (ChannelBuffer *) NULL) && (statePtr->inQueueHead->nextRemoved < statePtr->inQueueHead->nextAdded)) { mask &= ~TCL_READABLE; /* * Andreas Kupries, April 11, 2003 * * Some operating systems (Solaris 2.6 and higher (but not * Solaris 2.5, go figure)) generate READABLE and * EXCEPTION events when select()'ing [*] on a plain file, * even if EOF was not yet reached. This is a problem in * the following situation: * * - An extension asks to get both READABLE and EXCEPTION * events. * - It reads data into a buffer smaller than the buffer * used by Tcl itself. * - It does not process all events in the event queue, but * only only one, at least in some situations. * * In that case we can get into a situation where * * - Tcl drops READABLE here, because it has data in its own * buffers waiting to be read by the extension. * - A READABLE event is syntesized via timer. * - The OS still reports the EXCEPTION condition on the file. * - And the extension gets the EXCPTION event first, and * handles this as EOF. * * End result ==> Premature end of reading from a file. * * The concrete example is 'Expect', and its [expect] * command (and at the C-level, deep in the bowels of * Expect, 'exp_get_next_event'. See marker 'SunOS' for * commentary in that function too). * * [*] As the Tcl notifier does. See also for marker * 'SunOS' in file 'exp_event.c' of Expect. * * Our solution here is to drop the interest in the * EXCEPTION events too. This compiles on all platforms, * and also passes the testsuite on all of them. */ mask &= ~TCL_EXCEPTION; if (!statePtr->timer) { statePtr->timer = Tcl_CreateTimerHandler(0, ChannelTimerProc, (ClientData) chanPtr); } } } (chanPtr->typePtr->watchProc)(chanPtr->instanceData, mask); } /* *---------------------------------------------------------------------- * * ChannelTimerProc -- * * Timer handler scheduled by UpdateInterest to monitor the * channel buffers until they are empty. * * Results: * None. * * Side effects: * May invoke channel handlers. * *---------------------------------------------------------------------- */ static void ChannelTimerProc(clientData) ClientData clientData; { Channel *chanPtr = (Channel *) clientData; ChannelState *statePtr = chanPtr->state; /* state info for channel */ if (!(statePtr->flags & CHANNEL_NEED_MORE_DATA) && (statePtr->interestMask & TCL_READABLE) && (statePtr->inQueueHead != (ChannelBuffer *) NULL) && (statePtr->inQueueHead->nextRemoved < statePtr->inQueueHead->nextAdded)) { /* * Restart the timer in case a channel handler reenters the * event loop before UpdateInterest gets called by Tcl_NotifyChannel. */ statePtr->timer = Tcl_CreateTimerHandler(0, ChannelTimerProc, (ClientData) chanPtr); #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING /* Set the TIMER flag to notify the higher levels that the * driver might have no data for us. We do this only if we are * in non-blocking mode and the driver has no BlockModeProc * because only then we really don't know if the driver will * block or not. A similar test is done in "PeekAhead". */ if ((statePtr->flags & CHANNEL_NONBLOCKING) && (Tcl_ChannelBlockModeProc(chanPtr->typePtr) == NULL)) { statePtr->flags |= CHANNEL_TIMER_FEV; } #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ Tcl_Preserve((ClientData) statePtr); Tcl_NotifyChannel((Tcl_Channel)chanPtr, TCL_READABLE); #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING statePtr->flags &= ~CHANNEL_TIMER_FEV; #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ Tcl_Release((ClientData) statePtr); } else { statePtr->timer = NULL; UpdateInterest(chanPtr); } } /* *---------------------------------------------------------------------- * * Tcl_CreateChannelHandler -- * * Arrange for a given procedure to be invoked whenever the * channel indicated by the chanPtr arg becomes readable or * writable. * * Results: * None. * * Side effects: * From now on, whenever the I/O channel given by chanPtr becomes * ready in the way indicated by mask, proc will be invoked. * See the manual entry for details on the calling sequence * to proc. If there is already an event handler for chan, proc * and clientData, then the mask will be updated. * *---------------------------------------------------------------------- */ void Tcl_CreateChannelHandler(chan, mask, proc, clientData) Tcl_Channel chan; /* The channel to create the handler for. */ int mask; /* OR'ed combination of TCL_READABLE, * TCL_WRITABLE, and TCL_EXCEPTION: * indicates conditions under which * proc should be called. Use 0 to * disable a registered handler. */ Tcl_ChannelProc *proc; /* Procedure to call for each * selected event. */ ClientData clientData; /* Arbitrary data to pass to proc. */ { ChannelHandler *chPtr; Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* state info for channel */ /* * Check whether this channel handler is not already registered. If * it is not, create a new record, else reuse existing record (smash * current values). */ for (chPtr = statePtr->chPtr; chPtr != (ChannelHandler *) NULL; chPtr = chPtr->nextPtr) { if ((chPtr->chanPtr == chanPtr) && (chPtr->proc == proc) && (chPtr->clientData == clientData)) { break; } } if (chPtr == (ChannelHandler *) NULL) { chPtr = (ChannelHandler *) ckalloc((unsigned) sizeof(ChannelHandler)); chPtr->mask = 0; chPtr->proc = proc; chPtr->clientData = clientData; chPtr->chanPtr = chanPtr; chPtr->nextPtr = statePtr->chPtr; statePtr->chPtr = chPtr; } /* * The remainder of the initialization below is done regardless of * whether or not this is a new record or a modification of an old * one. */ chPtr->mask = mask; /* * Recompute the interest mask for the channel - this call may actually * be disabling an existing handler. */ statePtr->interestMask = 0; for (chPtr = statePtr->chPtr; chPtr != (ChannelHandler *) NULL; chPtr = chPtr->nextPtr) { statePtr->interestMask |= chPtr->mask; } UpdateInterest(statePtr->topChanPtr); } /* *---------------------------------------------------------------------- * * Tcl_DeleteChannelHandler -- * * Cancel a previously arranged callback arrangement for an IO * channel. * * Results: * None. * * Side effects: * If a callback was previously registered for this chan, proc and * clientData , it is removed and the callback will no longer be called * when the channel becomes ready for IO. * *---------------------------------------------------------------------- */ void Tcl_DeleteChannelHandler(chan, proc, clientData) Tcl_Channel chan; /* The channel for which to remove the * callback. */ Tcl_ChannelProc *proc; /* The procedure in the callback to delete. */ ClientData clientData; /* The client data in the callback * to delete. */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); ChannelHandler *chPtr, *prevChPtr; Channel *chanPtr = (Channel *) chan; ChannelState *statePtr = chanPtr->state; /* state info for channel */ NextChannelHandler *nhPtr; /* * Find the entry and the previous one in the list. */ for (prevChPtr = (ChannelHandler *) NULL, chPtr = statePtr->chPtr; chPtr != (ChannelHandler *) NULL; chPtr = chPtr->nextPtr) { if ((chPtr->chanPtr == chanPtr) && (chPtr->clientData == clientData) && (chPtr->proc == proc)) { break; } prevChPtr = chPtr; } /* * If not found, return without doing anything. */ if (chPtr == (ChannelHandler *) NULL) { return; } /* * If ChannelHandlerEventProc is about to process this handler, tell it to * process the next one instead - we are going to delete *this* one. */ for (nhPtr = tsdPtr->nestedHandlerPtr; nhPtr != (NextChannelHandler *) NULL; nhPtr = nhPtr->nestedHandlerPtr) { if (nhPtr->nextHandlerPtr == chPtr) { nhPtr->nextHandlerPtr = chPtr->nextPtr; } } /* * Splice it out of the list of channel handlers. */ if (prevChPtr == (ChannelHandler *) NULL) { statePtr->chPtr = chPtr->nextPtr; } else { prevChPtr->nextPtr = chPtr->nextPtr; } ckfree((char *) chPtr); /* * Recompute the interest list for the channel, so that infinite loops * will not result if Tcl_DeleteChannelHandler is called inside an * event. */ statePtr->interestMask = 0; for (chPtr = statePtr->chPtr; chPtr != (ChannelHandler *) NULL; chPtr = chPtr->nextPtr) { statePtr->interestMask |= chPtr->mask; } UpdateInterest(statePtr->topChanPtr); } /* *---------------------------------------------------------------------- * * DeleteScriptRecord -- * * Delete a script record for this combination of channel, interp * and mask. * * Results: * None. * * Side effects: * Deletes a script record and cancels a channel event handler. * *---------------------------------------------------------------------- */ static void DeleteScriptRecord(interp, chanPtr, mask) Tcl_Interp *interp; /* Interpreter in which script was to be * executed. */ Channel *chanPtr; /* The channel for which to delete the * script record (if any). */ int mask; /* Events in mask must exactly match mask * of script to delete. */ { ChannelState *statePtr = chanPtr->state; /* state info for channel */ EventScriptRecord *esPtr, *prevEsPtr; for (esPtr = statePtr->scriptRecordPtr, prevEsPtr = (EventScriptRecord *) NULL; esPtr != (EventScriptRecord *) NULL; prevEsPtr = esPtr, esPtr = esPtr->nextPtr) { if ((esPtr->interp == interp) && (esPtr->mask == mask)) { if (esPtr == statePtr->scriptRecordPtr) { statePtr->scriptRecordPtr = esPtr->nextPtr; } else { prevEsPtr->nextPtr = esPtr->nextPtr; } Tcl_DeleteChannelHandler((Tcl_Channel) chanPtr, TclChannelEventScriptInvoker, (ClientData) esPtr); Tcl_DecrRefCount(esPtr->scriptPtr); ckfree((char *) esPtr); break; } } } /* *---------------------------------------------------------------------- * * CreateScriptRecord -- * * Creates a record to store a script to be executed when a specific * event fires on a specific channel. * * Results: * None. * * Side effects: * Causes the script to be stored for later execution. * *---------------------------------------------------------------------- */ static void CreateScriptRecord(interp, chanPtr, mask, scriptPtr) Tcl_Interp *interp; /* Interpreter in which to execute * the stored script. */ Channel *chanPtr; /* Channel for which script is to * be stored. */ int mask; /* Set of events for which script * will be invoked. */ Tcl_Obj *scriptPtr; /* Pointer to script object. */ { ChannelState *statePtr = chanPtr->state; /* state info for channel */ EventScriptRecord *esPtr; for (esPtr = statePtr->scriptRecordPtr; esPtr != (EventScriptRecord *) NULL; esPtr = esPtr->nextPtr) { if ((esPtr->interp == interp) && (esPtr->mask == mask)) { Tcl_DecrRefCount(esPtr->scriptPtr); esPtr->scriptPtr = (Tcl_Obj *) NULL; break; } } if (esPtr == (EventScriptRecord *) NULL) { esPtr = (EventScriptRecord *) ckalloc((unsigned) sizeof(EventScriptRecord)); Tcl_CreateChannelHandler((Tcl_Channel) chanPtr, mask, TclChannelEventScriptInvoker, (ClientData) esPtr); esPtr->nextPtr = statePtr->scriptRecordPtr; statePtr->scriptRecordPtr = esPtr; } esPtr->chanPtr = chanPtr; esPtr->interp = interp; esPtr->mask = mask; Tcl_IncrRefCount(scriptPtr); esPtr->scriptPtr = scriptPtr; } /* *---------------------------------------------------------------------- * * TclChannelEventScriptInvoker -- * * Invokes a script scheduled by "fileevent" for when the channel * becomes ready for IO. This function is invoked by the channel * handler which was created by the Tcl "fileevent" command. * * Results: * None. * * Side effects: * Whatever the script does. * *---------------------------------------------------------------------- */ void TclChannelEventScriptInvoker(clientData, mask) ClientData clientData; /* The script+interp record. */ int mask; /* Not used. */ { Tcl_Interp *interp; /* Interpreter in which to eval the script. */ Channel *chanPtr; /* The channel for which this handler is * registered. */ EventScriptRecord *esPtr; /* The event script + interpreter to eval it * in. */ int result; /* Result of call to eval script. */ esPtr = (EventScriptRecord *) clientData; chanPtr = esPtr->chanPtr; mask = esPtr->mask; interp = esPtr->interp; /* * We must preserve the interpreter so we can report errors on it * later. Note that we do not need to preserve the channel because * that is done by Tcl_NotifyChannel before calling channel handlers. */ Tcl_Preserve((ClientData) interp); result = Tcl_EvalObjEx(interp, esPtr->scriptPtr, TCL_EVAL_GLOBAL); /* * On error, cause a background error and remove the channel handler * and the script record. * * NOTE: Must delete channel handler before causing the background error * because the background error may want to reinstall the handler. */ if (result != TCL_OK) { if (chanPtr->typePtr != NULL) { DeleteScriptRecord(interp, chanPtr, mask); } Tcl_BackgroundError(interp); } Tcl_Release((ClientData) interp); } /* *---------------------------------------------------------------------- * * Tcl_FileEventObjCmd -- * * This procedure implements the "fileevent" Tcl command. See the * user documentation for details on what it does. This command is * based on the Tk command "fileevent" which in turn is based on work * contributed by Mark Diekhans. * * Results: * A standard Tcl result. * * Side effects: * May create a channel handler for the specified channel. * *---------------------------------------------------------------------- */ /* ARGSUSED */ int Tcl_FileEventObjCmd(clientData, interp, objc, objv) ClientData clientData; /* Not used. */ Tcl_Interp *interp; /* Interpreter in which the channel * for which to create the handler * is found. */ int objc; /* Number of arguments. */ Tcl_Obj *CONST objv[]; /* Argument objects. */ { Channel *chanPtr; /* The channel to create * the handler for. */ ChannelState *statePtr; /* state info for channel */ Tcl_Channel chan; /* The opaque type for the channel. */ char *chanName; int modeIndex; /* Index of mode argument. */ int mask; static CONST char *modeOptions[] = {"readable", "writable", NULL}; static int maskArray[] = {TCL_READABLE, TCL_WRITABLE}; if ((objc != 3) && (objc != 4)) { Tcl_WrongNumArgs(interp, 1, objv, "channelId event ?script?"); return TCL_ERROR; } if (Tcl_GetIndexFromObj(interp, objv[2], modeOptions, "event name", 0, &modeIndex) != TCL_OK) { return TCL_ERROR; } mask = maskArray[modeIndex]; chanName = Tcl_GetString(objv[1]); chan = Tcl_GetChannel(interp, chanName, NULL); if (chan == (Tcl_Channel) NULL) { return TCL_ERROR; } chanPtr = (Channel *) chan; statePtr = chanPtr->state; if ((statePtr->flags & mask) == 0) { Tcl_AppendResult(interp, "channel is not ", (mask == TCL_READABLE) ? "readable" : "writable", (char *) NULL); return TCL_ERROR; } /* * If we are supposed to return the script, do so. */ if (objc == 3) { EventScriptRecord *esPtr; for (esPtr = statePtr->scriptRecordPtr; esPtr != (EventScriptRecord *) NULL; esPtr = esPtr->nextPtr) { if ((esPtr->interp == interp) && (esPtr->mask == mask)) { Tcl_SetObjResult(interp, esPtr->scriptPtr); break; } } return TCL_OK; } /* * If we are supposed to delete a stored script, do so. */ if (*(Tcl_GetString(objv[3])) == '\0') { DeleteScriptRecord(interp, chanPtr, mask); return TCL_OK; } /* * Make the script record that will link between the event and the * script to invoke. This also creates a channel event handler which * will evaluate the script in the supplied interpreter. */ CreateScriptRecord(interp, chanPtr, mask, objv[3]); return TCL_OK; } /* *---------------------------------------------------------------------- * * TclCopyChannel -- * * This routine copies data from one channel to another, either * synchronously or asynchronously. If a command script is * supplied, the operation runs in the background. The script * is invoked when the copy completes. Otherwise the function * waits until the copy is completed before returning. * * Results: * A standard Tcl result. * * Side effects: * May schedule a background copy operation that causes both * channels to be marked busy. * *---------------------------------------------------------------------- */ int TclCopyChannel(interp, inChan, outChan, toRead, cmdPtr) Tcl_Interp *interp; /* Current interpreter. */ Tcl_Channel inChan; /* Channel to read from. */ Tcl_Channel outChan; /* Channel to write to. */ int toRead; /* Amount of data to copy, or -1 for all. */ Tcl_Obj *cmdPtr; /* Pointer to script to execute or NULL. */ { Channel *inPtr = (Channel *) inChan; Channel *outPtr = (Channel *) outChan; ChannelState *inStatePtr, *outStatePtr; int readFlags, writeFlags; CopyState *csPtr; int nonBlocking = (cmdPtr) ? CHANNEL_NONBLOCKING : 0; inStatePtr = inPtr->state; outStatePtr = outPtr->state; if (inStatePtr->csPtr) { if (interp) { Tcl_AppendStringsToObj(Tcl_GetObjResult(interp), "channel \"", Tcl_GetChannelName(inChan), "\" is busy", NULL); } return TCL_ERROR; } if (outStatePtr->csPtr) { if (interp) { Tcl_AppendStringsToObj(Tcl_GetObjResult(interp), "channel \"", Tcl_GetChannelName(outChan), "\" is busy", NULL); } return TCL_ERROR; } readFlags = inStatePtr->flags; writeFlags = outStatePtr->flags; /* * Set up the blocking mode appropriately. Background copies need * non-blocking channels. Foreground copies need blocking channels. * If there is an error, restore the old blocking mode. */ if (nonBlocking != (readFlags & CHANNEL_NONBLOCKING)) { if (SetBlockMode(interp, inPtr, nonBlocking ? TCL_MODE_NONBLOCKING : TCL_MODE_BLOCKING) != TCL_OK) { return TCL_ERROR; } } if (inPtr != outPtr) { if (nonBlocking != (writeFlags & CHANNEL_NONBLOCKING)) { if (SetBlockMode(NULL, outPtr, nonBlocking ? TCL_MODE_NONBLOCKING : TCL_MODE_BLOCKING) != TCL_OK) { if (nonBlocking != (readFlags & CHANNEL_NONBLOCKING)) { SetBlockMode(NULL, inPtr, (readFlags & CHANNEL_NONBLOCKING) ? TCL_MODE_NONBLOCKING : TCL_MODE_BLOCKING); return TCL_ERROR; } } } } /* * Make sure the output side is unbuffered. */ outStatePtr->flags = (outStatePtr->flags & ~(CHANNEL_LINEBUFFERED)) | CHANNEL_UNBUFFERED; /* * Allocate a new CopyState to maintain info about the current copy in * progress. This structure will be deallocated when the copy is * completed. */ csPtr = (CopyState*) ckalloc(sizeof(CopyState) + inStatePtr->bufSize); csPtr->bufSize = inStatePtr->bufSize; csPtr->readPtr = inPtr; csPtr->writePtr = outPtr; csPtr->readFlags = readFlags; csPtr->writeFlags = writeFlags; csPtr->toRead = toRead; csPtr->total = 0; csPtr->interp = interp; if (cmdPtr) { Tcl_IncrRefCount(cmdPtr); } csPtr->cmdPtr = cmdPtr; inStatePtr->csPtr = csPtr; outStatePtr->csPtr = csPtr; /* * Start copying data between the channels. */ return CopyData(csPtr, 0); } /* *---------------------------------------------------------------------- * * CopyData -- * * This function implements the lowest level of the copying * mechanism for TclCopyChannel. * * Results: * Returns TCL_OK on success, else TCL_ERROR. * * Side effects: * Moves data between channels, may create channel handlers. * *---------------------------------------------------------------------- */ static int CopyData(csPtr, mask) CopyState *csPtr; /* State of copy operation. */ int mask; /* Current channel event flags. */ { Tcl_Interp *interp; Tcl_Obj *cmdPtr, *errObj = NULL, *bufObj = NULL; Tcl_Channel inChan, outChan; ChannelState *inStatePtr, *outStatePtr; int result = TCL_OK, size, total, sizeb; char* buffer; int inBinary, outBinary, sameEncoding; /* Encoding control */ int underflow; /* input underflow */ inChan = (Tcl_Channel) csPtr->readPtr; outChan = (Tcl_Channel) csPtr->writePtr; inStatePtr = csPtr->readPtr->state; outStatePtr = csPtr->writePtr->state; interp = csPtr->interp; cmdPtr = csPtr->cmdPtr; /* * Copy the data the slow way, using the translation mechanism. * * Note: We have make sure that we use the topmost channel in a stack * for the copying. The caller uses Tcl_GetChannel to access it, and * thus gets the bottom of the stack. */ inBinary = (inStatePtr->encoding == NULL); outBinary = (outStatePtr->encoding == NULL); sameEncoding = (inStatePtr->encoding == outStatePtr->encoding); if (!(inBinary || sameEncoding)) { bufObj = Tcl_NewObj (); Tcl_IncrRefCount (bufObj); } while (csPtr->toRead != 0) { /* * Check for unreported background errors. */ if (inStatePtr->unreportedError != 0) { Tcl_SetErrno(inStatePtr->unreportedError); inStatePtr->unreportedError = 0; goto readError; } if (outStatePtr->unreportedError != 0) { Tcl_SetErrno(outStatePtr->unreportedError); outStatePtr->unreportedError = 0; goto writeError; } /* * Read up to bufSize bytes. */ if ((csPtr->toRead == -1) || (csPtr->toRead > csPtr->bufSize)) { sizeb = csPtr->bufSize; } else { sizeb = csPtr->toRead; } if (inBinary || sameEncoding) { size = DoRead(inStatePtr->topChanPtr, csPtr->buffer, sizeb); } else { size = DoReadChars(inStatePtr->topChanPtr, bufObj, sizeb, 0 /* No append */); } underflow = (size >= 0) && (size < sizeb); /* input underflow */ if (size < 0) { readError: errObj = Tcl_NewObj(); Tcl_AppendStringsToObj(errObj, "error reading \"", Tcl_GetChannelName(inChan), "\": ", Tcl_PosixError(interp), (char *) NULL); break; } else if (underflow) { /* * We had an underflow on the read side. If we are at EOF, * then the copying is done, otherwise set up a channel * handler to detect when the channel becomes readable again. */ if ((size == 0) && Tcl_Eof(inChan)) { break; } if (! Tcl_Eof(inChan) && !(mask & TCL_READABLE)) { if (mask & TCL_WRITABLE) { Tcl_DeleteChannelHandler(outChan, CopyEventProc, (ClientData) csPtr); } Tcl_CreateChannelHandler(inChan, TCL_READABLE, CopyEventProc, (ClientData) csPtr); } if (size == 0) { if (bufObj != (Tcl_Obj*) NULL) { Tcl_DecrRefCount (bufObj); bufObj = (Tcl_Obj*) NULL; } return TCL_OK; } } /* * Now write the buffer out. */ if (inBinary || sameEncoding) { buffer = csPtr->buffer; sizeb = size; } else { buffer = Tcl_GetStringFromObj (bufObj, &sizeb); } if (outBinary || sameEncoding) { sizeb = DoWrite(outStatePtr->topChanPtr, buffer, sizeb); } else { sizeb = DoWriteChars(outStatePtr->topChanPtr, buffer, sizeb); } if (inBinary || sameEncoding) { /* Both read and write counted bytes */ size = sizeb; } /* else : Read counted characters, write counted bytes, i.e. size != sizeb */ if (sizeb < 0) { writeError: errObj = Tcl_NewObj(); Tcl_AppendStringsToObj(errObj, "error writing \"", Tcl_GetChannelName(outChan), "\": ", Tcl_PosixError(interp), (char *) NULL); break; } /* * Update the current byte count. Do it now so the count is * valid before a return or break takes us out of the loop. * The invariant at the top of the loop should be that * csPtr->toRead holds the number of bytes left to copy. */ if (csPtr->toRead != -1) { csPtr->toRead -= size; } csPtr->total += size; /* * Break loop if EOF && (size>0) */ if (Tcl_Eof(inChan)) { break; } /* * Check to see if the write is happening in the background. If so, * stop copying and wait for the channel to become writable again. * After input underflow we already installed a readable handler * therefore we don't need a writable handler. */ if ( ! underflow && (outStatePtr->flags & BG_FLUSH_SCHEDULED) ) { if (!(mask & TCL_WRITABLE)) { if (mask & TCL_READABLE) { Tcl_DeleteChannelHandler(inChan, CopyEventProc, (ClientData) csPtr); } Tcl_CreateChannelHandler(outChan, TCL_WRITABLE, CopyEventProc, (ClientData) csPtr); } if (bufObj != (Tcl_Obj*) NULL) { Tcl_DecrRefCount (bufObj); bufObj = (Tcl_Obj*) NULL; } return TCL_OK; } /* * For background copies, we only do one buffer per invocation so * we don't starve the rest of the system. */ if (cmdPtr) { /* * The first time we enter this code, there won't be a * channel handler established yet, so do it here. */ if (mask == 0) { Tcl_CreateChannelHandler(outChan, TCL_WRITABLE, CopyEventProc, (ClientData) csPtr); } if (bufObj != (Tcl_Obj*) NULL) { Tcl_DecrRefCount (bufObj); bufObj = (Tcl_Obj*) NULL; } return TCL_OK; } } /* while */ if (bufObj != (Tcl_Obj*) NULL) { Tcl_DecrRefCount (bufObj); bufObj = (Tcl_Obj*) NULL; } /* * Make the callback or return the number of bytes transferred. * The local total is used because StopCopy frees csPtr. */ total = csPtr->total; if (cmdPtr && interp) { /* * Get a private copy of the command so we can mutate it * by adding arguments. Note that StopCopy frees our saved * reference to the original command obj. */ cmdPtr = Tcl_DuplicateObj(cmdPtr); Tcl_IncrRefCount(cmdPtr); StopCopy(csPtr); Tcl_Preserve((ClientData) interp); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewIntObj(total)); if (errObj) { Tcl_ListObjAppendElement(interp, cmdPtr, errObj); } if (Tcl_EvalObjEx(interp, cmdPtr, TCL_EVAL_GLOBAL) != TCL_OK) { Tcl_BackgroundError(interp); result = TCL_ERROR; } Tcl_DecrRefCount(cmdPtr); Tcl_Release((ClientData) interp); } else { StopCopy(csPtr); if (interp) { if (errObj) { Tcl_SetObjResult(interp, errObj); result = TCL_ERROR; } else { Tcl_ResetResult(interp); Tcl_SetIntObj(Tcl_GetObjResult(interp), total); } } } return result; } /* *---------------------------------------------------------------------- * * DoRead -- * * Reads a given number of bytes from a channel. * * No encoding conversions are applied to the bytes being read. * * Results: * The number of characters read, or -1 on error. Use Tcl_GetErrno() * to retrieve the error code for the error that occurred. * * Side effects: * May cause input to be buffered. * *---------------------------------------------------------------------- */ static int DoRead(chanPtr, bufPtr, toRead) Channel *chanPtr; /* The channel from which to read. */ char *bufPtr; /* Where to store input read. */ int toRead; /* Maximum number of bytes to read. */ { ChannelState *statePtr = chanPtr->state; /* state info for channel */ int copied; /* How many characters were copied into * the result string? */ int copiedNow; /* How many characters were copied from * the current input buffer? */ int result; /* Of calling GetInput. */ /* * If we have not encountered a sticky EOF, clear the EOF bit. Either * way clear the BLOCKED bit. We want to discover these anew during * each operation. */ if (!(statePtr->flags & CHANNEL_STICKY_EOF)) { statePtr->flags &= ~CHANNEL_EOF; } statePtr->flags &= ~(CHANNEL_BLOCKED | CHANNEL_NEED_MORE_DATA); for (copied = 0; copied < toRead; copied += copiedNow) { copiedNow = CopyAndTranslateBuffer(statePtr, bufPtr + copied, toRead - copied); if (copiedNow == 0) { if (statePtr->flags & CHANNEL_EOF) { goto done; } if (statePtr->flags & CHANNEL_BLOCKED) { if (statePtr->flags & CHANNEL_NONBLOCKING) { goto done; } statePtr->flags &= (~(CHANNEL_BLOCKED)); } result = GetInput(chanPtr); if (result != 0) { if (result != EAGAIN) { copied = -1; } goto done; } } } statePtr->flags &= (~(CHANNEL_BLOCKED)); done: /* * Update the notifier state so we don't block while there is still * data in the buffers. */ UpdateInterest(chanPtr); return copied; } /* *---------------------------------------------------------------------- * * CopyAndTranslateBuffer -- * * Copy at most one buffer of input to the result space, doing * eol translations according to mode in effect currently. * * Results: * Number of bytes stored in the result buffer (as opposed to the * number of bytes read from the channel). May return * zero if no input is available to be translated. * * Side effects: * Consumes buffered input. May deallocate one buffer. * *---------------------------------------------------------------------- */ static int CopyAndTranslateBuffer(statePtr, result, space) ChannelState *statePtr; /* Channel state from which to read input. */ char *result; /* Where to store the copied input. */ int space; /* How many bytes are available in result * to store the copied input? */ { ChannelBuffer *bufPtr; /* The buffer from which to copy bytes. */ int bytesInBuffer; /* How many bytes are available to be * copied in the current input buffer? */ int copied; /* How many characters were already copied * into the destination space? */ int i; /* Iterates over the copied input looking * for the input eofChar. */ /* * If there is no input at all, return zero. The invariant is that either * there is no buffer in the queue, or if the first buffer is empty, it * is also the last buffer (and thus there is no input in the queue). * Note also that if the buffer is empty, we leave it in the queue. */ if (statePtr->inQueueHead == (ChannelBuffer *) NULL) { return 0; } bufPtr = statePtr->inQueueHead; bytesInBuffer = bufPtr->nextAdded - bufPtr->nextRemoved; copied = 0; switch (statePtr->inputTranslation) { case TCL_TRANSLATE_LF: { if (bytesInBuffer == 0) { return 0; } /* * Copy the current chunk into the result buffer. */ if (bytesInBuffer < space) { space = bytesInBuffer; } memcpy((VOID *) result, (VOID *) (bufPtr->buf + bufPtr->nextRemoved), (size_t) space); bufPtr->nextRemoved += space; copied = space; break; } case TCL_TRANSLATE_CR: { char *end; if (bytesInBuffer == 0) { return 0; } /* * Copy the current chunk into the result buffer, then * replace all \r with \n. */ if (bytesInBuffer < space) { space = bytesInBuffer; } memcpy((VOID *) result, (VOID *) (bufPtr->buf + bufPtr->nextRemoved), (size_t) space); bufPtr->nextRemoved += space; copied = space; for (end = result + copied; result < end; result++) { if (*result == '\r') { *result = '\n'; } } break; } case TCL_TRANSLATE_CRLF: { char *src, *end, *dst; int curByte; /* * If there is a held-back "\r" at EOF, produce it now. */ if (bytesInBuffer == 0) { if ((statePtr->flags & (INPUT_SAW_CR | CHANNEL_EOF)) == (INPUT_SAW_CR | CHANNEL_EOF)) { result[0] = '\r'; statePtr->flags &= ~INPUT_SAW_CR; return 1; } return 0; } /* * Copy the current chunk and replace "\r\n" with "\n" * (but not standalone "\r"!). */ if (bytesInBuffer < space) { space = bytesInBuffer; } memcpy((VOID *) result, (VOID *) (bufPtr->buf + bufPtr->nextRemoved), (size_t) space); bufPtr->nextRemoved += space; copied = space; end = result + copied; dst = result; for (src = result; src < end; src++) { curByte = *src; if (curByte == '\n') { statePtr->flags &= ~INPUT_SAW_CR; } else if (statePtr->flags & INPUT_SAW_CR) { statePtr->flags &= ~INPUT_SAW_CR; *dst = '\r'; dst++; } if (curByte == '\r') { statePtr->flags |= INPUT_SAW_CR; } else { *dst = (char) curByte; dst++; } } copied = dst - result; break; } case TCL_TRANSLATE_AUTO: { char *src, *end, *dst; int curByte; if (bytesInBuffer == 0) { return 0; } /* * Loop over the current buffer, converting "\r" and "\r\n" * to "\n". */ if (bytesInBuffer < space) { space = bytesInBuffer; } memcpy((VOID *) result, (VOID *) (bufPtr->buf + bufPtr->nextRemoved), (size_t) space); bufPtr->nextRemoved += space; copied = space; end = result + copied; dst = result; for (src = result; src < end; src++) { curByte = *src; if (curByte == '\r') { statePtr->flags |= INPUT_SAW_CR; *dst = '\n'; dst++; } else { if ((curByte != '\n') || !(statePtr->flags & INPUT_SAW_CR)) { *dst = (char) curByte; dst++; } statePtr->flags &= ~INPUT_SAW_CR; } } copied = dst - result; break; } default: { panic("unknown eol translation mode"); } } /* * If an in-stream EOF character is set for this channel, check that * the input we copied so far does not contain the EOF char. If it does, * copy only up to and excluding that character. */ if (statePtr->inEofChar != 0) { for (i = 0; i < copied; i++) { if (result[i] == (char) statePtr->inEofChar) { /* * Set sticky EOF so that no further input is presented * to the caller. */ statePtr->flags |= (CHANNEL_EOF | CHANNEL_STICKY_EOF); statePtr->inputEncodingFlags |= TCL_ENCODING_END; copied = i; break; } } } /* * If the current buffer is empty recycle it. */ if (bufPtr->nextRemoved == bufPtr->nextAdded) { statePtr->inQueueHead = bufPtr->nextPtr; if (statePtr->inQueueHead == (ChannelBuffer *) NULL) { statePtr->inQueueTail = (ChannelBuffer *) NULL; } RecycleBuffer(statePtr, bufPtr, 0); } /* * Return the number of characters copied into the result buffer. * This may be different from the number of bytes consumed, because * of EOL translations. */ return copied; } /* *---------------------------------------------------------------------- * * CopyBuffer -- * * Copy at most one buffer of input to the result space. * * Results: * Number of bytes stored in the result buffer. May return * zero if no input is available. * * Side effects: * Consumes buffered input. May deallocate one buffer. * *---------------------------------------------------------------------- */ static int CopyBuffer(chanPtr, result, space) Channel *chanPtr; /* Channel from which to read input. */ char *result; /* Where to store the copied input. */ int space; /* How many bytes are available in result * to store the copied input? */ { ChannelBuffer *bufPtr; /* The buffer from which to copy bytes. */ int bytesInBuffer; /* How many bytes are available to be * copied in the current input buffer? */ int copied; /* How many characters were already copied * into the destination space? */ /* * If there is no input at all, return zero. The invariant is that * either there is no buffer in the queue, or if the first buffer * is empty, it is also the last buffer (and thus there is no * input in the queue). Note also that if the buffer is empty, we * don't leave it in the queue, but recycle it. */ if (chanPtr->inQueueHead == (ChannelBuffer *) NULL) { return 0; } bufPtr = chanPtr->inQueueHead; bytesInBuffer = bufPtr->nextAdded - bufPtr->nextRemoved; copied = 0; if (bytesInBuffer == 0) { RecycleBuffer(chanPtr->state, bufPtr, 0); chanPtr->inQueueHead = (ChannelBuffer*) NULL; chanPtr->inQueueTail = (ChannelBuffer*) NULL; return 0; } /* * Copy the current chunk into the result buffer. */ if (bytesInBuffer < space) { space = bytesInBuffer; } memcpy((VOID *) result, (VOID *) (bufPtr->buf + bufPtr->nextRemoved), (size_t) space); bufPtr->nextRemoved += space; copied = space; /* * We don't care about in-stream EOF characters here as the data * read here may still flow through one or more transformations, * i.e. is not in its final state yet. */ /* * If the current buffer is empty recycle it. */ if (bufPtr->nextRemoved == bufPtr->nextAdded) { chanPtr->inQueueHead = bufPtr->nextPtr; if (chanPtr->inQueueHead == (ChannelBuffer *) NULL) { chanPtr->inQueueTail = (ChannelBuffer *) NULL; } RecycleBuffer(chanPtr->state, bufPtr, 0); } /* * Return the number of characters copied into the result buffer. */ return copied; } /* *---------------------------------------------------------------------- * * DoWrite -- * * Puts a sequence of characters into an output buffer, may queue the * buffer for output if it gets full, and also remembers whether the * current buffer is ready e.g. if it contains a newline and we are in * line buffering mode. * * Results: * The number of bytes written or -1 in case of error. If -1, * Tcl_GetErrno will return the error code. * * Side effects: * May buffer up output and may cause output to be produced on the * channel. * *---------------------------------------------------------------------- */ static int DoWrite(chanPtr, src, srcLen) Channel *chanPtr; /* The channel to buffer output for. */ CONST char *src; /* Data to write. */ int srcLen; /* Number of bytes to write. */ { ChannelState *statePtr = chanPtr->state; /* state info for channel */ ChannelBuffer *outBufPtr; /* Current output buffer. */ int foundNewline; /* Did we find a newline in output? */ char *dPtr; CONST char *sPtr; /* Search variables for newline. */ int crsent; /* In CRLF eol translation mode, * remember the fact that a CR was * output to the channel without * its following NL. */ int i; /* Loop index for newline search. */ int destCopied; /* How many bytes were used in this * destination buffer to hold the * output? */ int totalDestCopied; /* How many bytes total were * copied to the channel buffer? */ int srcCopied; /* How many bytes were copied from * the source string? */ char *destPtr; /* Where in line to copy to? */ /* * If we are in network (or windows) translation mode, record the fact * that we have not yet sent a CR to the channel. */ crsent = 0; /* * Loop filling buffers and flushing them until all output has been * consumed. */ srcCopied = 0; totalDestCopied = 0; while (srcLen > 0) { /* * Make sure there is a current output buffer to accept output. */ if (statePtr->curOutPtr == (ChannelBuffer *) NULL) { statePtr->curOutPtr = AllocChannelBuffer(statePtr->bufSize); } outBufPtr = statePtr->curOutPtr; destCopied = outBufPtr->bufLength - outBufPtr->nextAdded; if (destCopied > srcLen) { destCopied = srcLen; } destPtr = outBufPtr->buf + outBufPtr->nextAdded; switch (statePtr->outputTranslation) { case TCL_TRANSLATE_LF: srcCopied = destCopied; memcpy((VOID *) destPtr, (VOID *) src, (size_t) destCopied); break; case TCL_TRANSLATE_CR: srcCopied = destCopied; memcpy((VOID *) destPtr, (VOID *) src, (size_t) destCopied); for (dPtr = destPtr; dPtr < destPtr + destCopied; dPtr++) { if (*dPtr == '\n') { *dPtr = '\r'; } } break; case TCL_TRANSLATE_CRLF: for (srcCopied = 0, dPtr = destPtr, sPtr = src; dPtr < destPtr + destCopied; dPtr++, sPtr++, srcCopied++) { if (*sPtr == '\n') { if (crsent) { *dPtr = '\n'; crsent = 0; } else { *dPtr = '\r'; crsent = 1; sPtr--, srcCopied--; } } else { *dPtr = *sPtr; } } break; case TCL_TRANSLATE_AUTO: panic("Tcl_Write: AUTO output translation mode not supported"); default: panic("Tcl_Write: unknown output translation mode"); } /* * The current buffer is ready for output if it is full, or if it * contains a newline and this channel is line-buffered, or if it * contains any output and this channel is unbuffered. */ outBufPtr->nextAdded += destCopied; if (!(statePtr->flags & BUFFER_READY)) { if (outBufPtr->nextAdded == outBufPtr->bufLength) { statePtr->flags |= BUFFER_READY; } else if (statePtr->flags & CHANNEL_LINEBUFFERED) { for (sPtr = src, i = 0, foundNewline = 0; (i < srcCopied) && (!foundNewline); i++, sPtr++) { if (*sPtr == '\n') { foundNewline = 1; break; } } if (foundNewline) { statePtr->flags |= BUFFER_READY; } } else if (statePtr->flags & CHANNEL_UNBUFFERED) { statePtr->flags |= BUFFER_READY; } } totalDestCopied += srcCopied; src += srcCopied; srcLen -= srcCopied; if (statePtr->flags & BUFFER_READY) { if (FlushChannel(NULL, chanPtr, 0) != 0) { return -1; } } } /* Closes "while" */ return totalDestCopied; } /* *---------------------------------------------------------------------- * * CopyEventProc -- * * This routine is invoked as a channel event handler for * the background copy operation. It is just a trivial wrapper * around the CopyData routine. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ static void CopyEventProc(clientData, mask) ClientData clientData; int mask; { (void) CopyData((CopyState *)clientData, mask); } /* *---------------------------------------------------------------------- * * StopCopy -- * * This routine halts a copy that is in progress. * * Results: * None. * * Side effects: * Removes any pending channel handlers and restores the blocking * and buffering modes of the channels. The CopyState is freed. * *---------------------------------------------------------------------- */ static void StopCopy(csPtr) CopyState *csPtr; /* State for bg copy to stop . */ { ChannelState *inStatePtr, *outStatePtr; int nonBlocking; if (!csPtr) { return; } inStatePtr = csPtr->readPtr->state; outStatePtr = csPtr->writePtr->state; /* * Restore the old blocking mode and output buffering mode. */ nonBlocking = (csPtr->readFlags & CHANNEL_NONBLOCKING); if (nonBlocking != (inStatePtr->flags & CHANNEL_NONBLOCKING)) { SetBlockMode(NULL, csPtr->readPtr, nonBlocking ? TCL_MODE_NONBLOCKING : TCL_MODE_BLOCKING); } if (csPtr->readPtr != csPtr->writePtr) { nonBlocking = (csPtr->writeFlags & CHANNEL_NONBLOCKING); if (nonBlocking != (outStatePtr->flags & CHANNEL_NONBLOCKING)) { SetBlockMode(NULL, csPtr->writePtr, nonBlocking ? TCL_MODE_NONBLOCKING : TCL_MODE_BLOCKING); } } outStatePtr->flags &= ~(CHANNEL_LINEBUFFERED | CHANNEL_UNBUFFERED); outStatePtr->flags |= csPtr->writeFlags & (CHANNEL_LINEBUFFERED | CHANNEL_UNBUFFERED); if (csPtr->cmdPtr) { Tcl_DeleteChannelHandler((Tcl_Channel)csPtr->readPtr, CopyEventProc, (ClientData)csPtr); if (csPtr->readPtr != csPtr->writePtr) { Tcl_DeleteChannelHandler((Tcl_Channel)csPtr->writePtr, CopyEventProc, (ClientData)csPtr); } Tcl_DecrRefCount(csPtr->cmdPtr); } inStatePtr->csPtr = NULL; outStatePtr->csPtr = NULL; ckfree((char*) csPtr); } /* *---------------------------------------------------------------------- * * StackSetBlockMode -- * * This function sets the blocking mode for a channel, iterating * through each channel in a stack and updates the state flags. * * Results: * 0 if OK, result code from failed blockModeProc otherwise. * * Side effects: * Modifies the blocking mode of the channel and possibly generates * an error. * *---------------------------------------------------------------------- */ static int StackSetBlockMode(chanPtr, mode) Channel *chanPtr; /* Channel to modify. */ int mode; /* One of TCL_MODE_BLOCKING or * TCL_MODE_NONBLOCKING. */ { int result = 0; Tcl_DriverBlockModeProc *blockModeProc; /* * Start at the top of the channel stack */ chanPtr = chanPtr->state->topChanPtr; while (chanPtr != (Channel *) NULL) { blockModeProc = Tcl_ChannelBlockModeProc(chanPtr->typePtr); if (blockModeProc != NULL) { result = (*blockModeProc) (chanPtr->instanceData, mode); if (result != 0) { Tcl_SetErrno(result); return result; } } chanPtr = chanPtr->downChanPtr; } return 0; } /* *---------------------------------------------------------------------- * * SetBlockMode -- * * This function sets the blocking mode for a channel and updates * the state flags. * * Results: * A standard Tcl result. * * Side effects: * Modifies the blocking mode of the channel and possibly generates * an error. * *---------------------------------------------------------------------- */ static int SetBlockMode(interp, chanPtr, mode) Tcl_Interp *interp; /* Interp for error reporting. */ Channel *chanPtr; /* Channel to modify. */ int mode; /* One of TCL_MODE_BLOCKING or * TCL_MODE_NONBLOCKING. */ { ChannelState *statePtr = chanPtr->state; /* state info for channel */ int result = 0; result = StackSetBlockMode(chanPtr, mode); if (result != 0) { if (interp != (Tcl_Interp *) NULL) { Tcl_AppendResult(interp, "error setting blocking mode: ", Tcl_PosixError(interp), (char *) NULL); } return TCL_ERROR; } if (mode == TCL_MODE_BLOCKING) { statePtr->flags &= (~(CHANNEL_NONBLOCKING | BG_FLUSH_SCHEDULED)); } else { statePtr->flags |= CHANNEL_NONBLOCKING; } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_GetChannelNames -- * * Return the names of all open channels in the interp. * * Results: * TCL_OK or TCL_ERROR. * * Side effects: * Interp result modified with list of channel names. * *---------------------------------------------------------------------- */ int Tcl_GetChannelNames(interp) Tcl_Interp *interp; /* Interp for error reporting. */ { return Tcl_GetChannelNamesEx(interp, (char *) NULL); } /* *---------------------------------------------------------------------- * * Tcl_GetChannelNamesEx -- * * Return the names of open channels in the interp filtered * filtered through a pattern. If pattern is NULL, it returns * all the open channels. * * Results: * TCL_OK or TCL_ERROR. * * Side effects: * Interp result modified with list of channel names. * *---------------------------------------------------------------------- */ int Tcl_GetChannelNamesEx(interp, pattern) Tcl_Interp *interp; /* Interp for error reporting. */ CONST char *pattern; /* pattern to filter on. */ { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); ChannelState *statePtr; CONST char *name; /* name for channel */ Tcl_Obj *resultPtr; /* pointer to result object */ Tcl_HashTable *hTblPtr; /* Hash table of channels. */ Tcl_HashEntry *hPtr; /* Search variable. */ Tcl_HashSearch hSearch; /* Search variable. */ if (interp == (Tcl_Interp *) NULL) { return TCL_OK; } /* * Get the channel table that stores the channels registered * for this interpreter. */ hTblPtr = GetChannelTable(interp); resultPtr = Tcl_GetObjResult(interp); for (hPtr = Tcl_FirstHashEntry(hTblPtr, &hSearch); hPtr != (Tcl_HashEntry *) NULL; hPtr = Tcl_NextHashEntry(&hSearch)) { statePtr = ((Channel *) Tcl_GetHashValue(hPtr))->state; if (statePtr->topChanPtr == (Channel *) tsdPtr->stdinChannel) { name = "stdin"; } else if (statePtr->topChanPtr == (Channel *) tsdPtr->stdoutChannel) { name = "stdout"; } else if (statePtr->topChanPtr == (Channel *) tsdPtr->stderrChannel) { name = "stderr"; } else { /* * This is also stored in Tcl_GetHashKey(hTblPtr, hPtr), * but it's simpler to just grab the name from the statePtr. */ name = statePtr->channelName; } if (((pattern == NULL) || Tcl_StringMatch(name, pattern)) && (Tcl_ListObjAppendElement(interp, resultPtr, Tcl_NewStringObj(name, -1)) != TCL_OK)) { return TCL_ERROR; } } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_IsChannelRegistered -- * * Checks whether the channel is associated with the interp. * See also Tcl_RegisterChannel and Tcl_UnregisterChannel. * * Results: * 0 if the channel is not registered in the interpreter, 1 else. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_IsChannelRegistered (interp, chan) Tcl_Interp* interp; /* The interp to query of the channel */ Tcl_Channel chan; /* The channel to check */ { Tcl_HashTable *hTblPtr; /* Hash table of channels. */ Tcl_HashEntry *hPtr; /* Search variable. */ Channel *chanPtr; /* The real IO channel. */ ChannelState *statePtr; /* State of the real channel. */ /* * Always check bottom-most channel in the stack. This is the one * that gets registered. */ chanPtr = ((Channel *) chan)->state->bottomChanPtr; statePtr = chanPtr->state; hTblPtr = (Tcl_HashTable *) Tcl_GetAssocData(interp, "tclIO", NULL); if (hTblPtr == (Tcl_HashTable *) NULL) { return 0; } hPtr = Tcl_FindHashEntry(hTblPtr, statePtr->channelName); if (hPtr == (Tcl_HashEntry *) NULL) { return 0; } if ((Channel *) Tcl_GetHashValue(hPtr) != chanPtr) { return 0; } return 1; } /* *---------------------------------------------------------------------- * * Tcl_IsChannelShared -- * * Checks whether the channel is shared by multiple interpreters. * * Results: * A boolean value (0 = Not shared, 1 = Shared). * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_IsChannelShared (chan) Tcl_Channel chan; /* The channel to query */ { ChannelState *statePtr = ((Channel *) chan)->state; /* State of real channel structure. */ return ((statePtr->refCount > 1) ? 1 : 0); } /* *---------------------------------------------------------------------- * * Tcl_IsChannelExisting -- * * Checks whether a channel of the given name exists in the * (thread)-global list of all channels. * See Tcl_GetChannelNamesEx for function exposed at the Tcl level. * * Results: * A boolean value (0 = Does not exist, 1 = Does exist). * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_IsChannelExisting(chanName) CONST char* chanName; /* The name of the channel to look for. */ { ChannelState *statePtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); CONST char *name; int chanNameLen; chanNameLen = strlen(chanName); for (statePtr = tsdPtr->firstCSPtr; statePtr != NULL; statePtr = statePtr->nextCSPtr) { if (statePtr->topChanPtr == (Channel *) tsdPtr->stdinChannel) { name = "stdin"; } else if (statePtr->topChanPtr == (Channel *) tsdPtr->stdoutChannel) { name = "stdout"; } else if (statePtr->topChanPtr == (Channel *) tsdPtr->stderrChannel) { name = "stderr"; } else { name = statePtr->channelName; } if ((*chanName == *name) && (memcmp(name, chanName, (size_t) chanNameLen) == 0)) { return 1; } } return 0; } /* *---------------------------------------------------------------------- * * Tcl_ChannelName -- * * Return the name of the channel type. * * Results: * A pointer the name of the channel type. * * Side effects: * None. * *---------------------------------------------------------------------- */ CONST char * Tcl_ChannelName(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { return chanTypePtr->typeName; } /* *---------------------------------------------------------------------- * * Tcl_ChannelVersion -- * * Return the of version of the channel type. * * Results: * One of the TCL_CHANNEL_VERSION_* constants from tcl.h * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_ChannelTypeVersion Tcl_ChannelVersion(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { if (chanTypePtr->version == TCL_CHANNEL_VERSION_2) { return TCL_CHANNEL_VERSION_2; } else if (chanTypePtr->version == TCL_CHANNEL_VERSION_3) { return TCL_CHANNEL_VERSION_3; } else if (chanTypePtr->version == TCL_CHANNEL_VERSION_4) { return TCL_CHANNEL_VERSION_4; } else { /* * In = ((int)minimumVersion); } /* *---------------------------------------------------------------------- * * Tcl_ChannelBlockModeProc -- * * Return the Tcl_DriverBlockModeProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverBlockModeProc * Tcl_ChannelBlockModeProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { if (HaveVersion(chanTypePtr, TCL_CHANNEL_VERSION_2)) { return chanTypePtr->blockModeProc; } else { /* * The v1 structure had the blockModeProc in a different place. */ return (Tcl_DriverBlockModeProc *) (chanTypePtr->version); } } /* *---------------------------------------------------------------------- * * Tcl_ChannelCloseProc -- * * Return the Tcl_DriverCloseProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverCloseProc * Tcl_ChannelCloseProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { return chanTypePtr->closeProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelClose2Proc -- * * Return the Tcl_DriverClose2Proc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverClose2Proc * Tcl_ChannelClose2Proc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { return chanTypePtr->close2Proc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelInputProc -- * * Return the Tcl_DriverInputProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverInputProc * Tcl_ChannelInputProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { return chanTypePtr->inputProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelOutputProc -- * * Return the Tcl_DriverOutputProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverOutputProc * Tcl_ChannelOutputProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { return chanTypePtr->outputProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelSeekProc -- * * Return the Tcl_DriverSeekProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverSeekProc * Tcl_ChannelSeekProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { return chanTypePtr->seekProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelSetOptionProc -- * * Return the Tcl_DriverSetOptionProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverSetOptionProc * Tcl_ChannelSetOptionProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { return chanTypePtr->setOptionProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelGetOptionProc -- * * Return the Tcl_DriverGetOptionProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverGetOptionProc * Tcl_ChannelGetOptionProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { return chanTypePtr->getOptionProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelWatchProc -- * * Return the Tcl_DriverWatchProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverWatchProc * Tcl_ChannelWatchProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { return chanTypePtr->watchProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelGetHandleProc -- * * Return the Tcl_DriverGetHandleProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverGetHandleProc * Tcl_ChannelGetHandleProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { return chanTypePtr->getHandleProc; } /* *---------------------------------------------------------------------- * * Tcl_ChannelFlushProc -- * * Return the Tcl_DriverFlushProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverFlushProc * Tcl_ChannelFlushProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { if (HaveVersion(chanTypePtr, TCL_CHANNEL_VERSION_2)) { return chanTypePtr->flushProc; } else { return NULL; } } /* *---------------------------------------------------------------------- * * Tcl_ChannelHandlerProc -- * * Return the Tcl_DriverHandlerProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverHandlerProc * Tcl_ChannelHandlerProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { if (HaveVersion(chanTypePtr, TCL_CHANNEL_VERSION_2)) { return chanTypePtr->handlerProc; } else { return NULL; } } /* *---------------------------------------------------------------------- * * Tcl_ChannelWideSeekProc -- * * Return the Tcl_DriverWideSeekProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverWideSeekProc * Tcl_ChannelWideSeekProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { if (HaveVersion(chanTypePtr, TCL_CHANNEL_VERSION_3)) { return chanTypePtr->wideSeekProc; } else { return NULL; } } /* *---------------------------------------------------------------------- * * Tcl_ChannelThreadActionProc -- * * Return the Tcl_DriverThreadActionProc of the channel type. * * Results: * A pointer to the proc. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_DriverThreadActionProc * Tcl_ChannelThreadActionProc(chanTypePtr) Tcl_ChannelType *chanTypePtr; /* Pointer to channel type. */ { if (HaveVersion(chanTypePtr, TCL_CHANNEL_VERSION_4)) { return chanTypePtr->threadActionProc; } else { return NULL; } } #if 0 /* For future debugging work, a simple function to print the flags of * a channel in semi-readable form. */ static int DumpFlags (str, flags) char* str; int flags; { char buf [20]; int i = 0; if (flags & TCL_READABLE) {buf[i] = 'r';} else {buf [i]='_';}; i++; if (flags & TCL_WRITABLE) {buf[i] = 'w';} else {buf [i]='_';}; i++; if (flags & CHANNEL_NONBLOCKING) {buf[i] = 'n';} else {buf [i]='_';}; i++; if (flags & CHANNEL_LINEBUFFERED) {buf[i] = 'l';} else {buf [i]='_';}; i++; if (flags & CHANNEL_UNBUFFERED) {buf[i] = 'u';} else {buf [i]='_';}; i++; if (flags & BUFFER_READY) {buf[i] = 'R';} else {buf [i]='_';}; i++; if (flags & BG_FLUSH_SCHEDULED) {buf[i] = 'F';} else {buf [i]='_';}; i++; if (flags & CHANNEL_CLOSED) {buf[i] = 'c';} else {buf [i]='_';}; i++; if (flags & CHANNEL_EOF) {buf[i] = 'E';} else {buf [i]='_';}; i++; if (flags & CHANNEL_STICKY_EOF) {buf[i] = 'S';} else {buf [i]='_';}; i++; if (flags & CHANNEL_BLOCKED) {buf[i] = 'B';} else {buf [i]='_';}; i++; if (flags & INPUT_SAW_CR) {buf[i] = '/';} else {buf [i]='_';}; i++; if (flags & INPUT_NEED_NL) {buf[i] = '*';} else {buf [i]='_';}; i++; if (flags & CHANNEL_DEAD) {buf[i] = 'D';} else {buf [i]='_';}; i++; if (flags & CHANNEL_RAW_MODE) {buf[i] = 'R';} else {buf [i]='_';}; i++; #ifdef TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING if (flags & CHANNEL_TIMER_FEV) {buf[i] = 'T';} else {buf [i]='_';}; i++; if (flags & CHANNEL_HAS_MORE_DATA) {buf[i] = 'H';} else {buf [i]='_';}; i++; #endif /* TCL_IO_TRACK_OS_FOR_DRIVER_WITH_BAD_BLOCKING */ if (flags & CHANNEL_INCLOSE) {buf[i] = 'x';} else {buf [i]='_';}; i++; buf [i] ='\0'; fprintf (stderr,"%s: %s\n", str, buf); fflush(stderr); return 0; } #endif