/* * tclNamesp.c -- * * Contains support for namespaces, which provide a separate context of * commands and global variables. The global :: namespace is the * traditional Tcl "global" scope. Other namespaces are created as * children of the global namespace. These other namespaces contain * special-purpose commands and variables for packages. * * Copyright (c) 1993-1997 Lucent Technologies. * Copyright (c) 1997 Sun Microsystems, Inc. * Copyright (c) 1998-1999 by Scriptics Corporation. * Copyright (c) 2002-2005 Donal K. Fellows. * Copyright (c) 2006 Neil Madden. * Contributions from Don Porter, NIST, 2007. (not subject to US copyright) * * Originally implemented by * Michael J. McLennan * Bell Labs Innovations for Lucent Technologies * mmclennan@lucent.com * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tclInt.h" #include "tclCompile.h" /* for NRCommand; and TclLogCommandInfo visibility */ /* * Thread-local storage used to avoid having a global lock on data that is not * limited to a single interpreter. */ typedef struct ThreadSpecificData { long numNsCreated; /* Count of the number of namespaces created * within the thread. This value is used as a * unique id for each namespace. Cannot be * per-interp because the nsId is used to * distinguish objects which can be passed * around between interps in the same thread, * but does not need to be global because * object internal reps are always per-thread * anyway. */ } ThreadSpecificData; static Tcl_ThreadDataKey dataKey; /* * This structure contains a cached pointer to a namespace that is the result * of resolving the namespace's name in some other namespace. It is the * internal representation for a nsName object. It contains the pointer along * with some information that is used to check the cached pointer's validity. */ typedef struct ResolvedNsName { Namespace *nsPtr; /* A cached pointer to the Namespace that the * name resolved to. */ Namespace *refNsPtr; /* Points to the namespace context in which * the name was resolved. NULL if the name is * fully qualified and thus the resolution * does not depend on the context. */ int refCount; /* Reference count: 1 for each nsName object * that has a pointer to this ResolvedNsName * structure as its internal rep. This * structure can be freed when refCount * becomes zero. */ } ResolvedNsName; /* * Declarations for functions local to this file: */ static void DeleteImportedCmd(ClientData clientData); static int DoImport(Tcl_Interp *interp, Namespace *nsPtr, Tcl_HashEntry *hPtr, const char *cmdName, const char *pattern, Namespace *importNsPtr, int allowOverwrite); static void DupNsNameInternalRep(Tcl_Obj *objPtr,Tcl_Obj *copyPtr); static char * ErrorCodeRead(ClientData clientData,Tcl_Interp *interp, const char *name1, const char *name2, int flags); static char * ErrorInfoRead(ClientData clientData,Tcl_Interp *interp, const char *name1, const char *name2, int flags); static char * EstablishErrorCodeTraces(ClientData clientData, Tcl_Interp *interp, const char *name1, const char *name2, int flags); static char * EstablishErrorInfoTraces(ClientData clientData, Tcl_Interp *interp, const char *name1, const char *name2, int flags); static void FreeNsNameInternalRep(Tcl_Obj *objPtr); static int GetNamespaceFromObj(Tcl_Interp *interp, Tcl_Obj *objPtr, Tcl_Namespace **nsPtrPtr); static int InvokeImportedCmd(ClientData clientData, Tcl_Interp *interp,int objc,Tcl_Obj *const objv[]); static int InvokeImportedNRCmd(ClientData clientData, Tcl_Interp *interp,int objc,Tcl_Obj *const objv[]); static int NamespaceChildrenCmd(ClientData dummy, Tcl_Interp *interp,int objc,Tcl_Obj *const objv[]); static int NamespaceCodeCmd(ClientData dummy, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int NamespaceCurrentCmd(ClientData dummy, Tcl_Interp *interp,int objc,Tcl_Obj *const objv[]); static int NamespaceDeleteCmd(ClientData dummy,Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int NamespaceEvalCmd(ClientData dummy, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int NRNamespaceEvalCmd(ClientData dummy, Tcl_Interp *interp,int objc,Tcl_Obj *const objv[]); static int NamespaceExistsCmd(ClientData dummy,Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int NamespaceExportCmd(ClientData dummy,Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int NamespaceForgetCmd(ClientData dummy,Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static void NamespaceFree(Namespace *nsPtr); static int NamespaceImportCmd(ClientData dummy,Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int NamespaceInscopeCmd(ClientData dummy, Tcl_Interp *interp,int objc,Tcl_Obj *const objv[]); static int NRNamespaceInscopeCmd(ClientData dummy, Tcl_Interp *interp,int objc,Tcl_Obj *const objv[]); static int NamespaceOriginCmd(ClientData dummy,Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int NamespaceParentCmd(ClientData dummy,Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int NamespacePathCmd(ClientData dummy, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int NamespaceQualifiersCmd(ClientData dummy, Tcl_Interp *interp,int objc,Tcl_Obj *const objv[]); static int NamespaceTailCmd(ClientData dummy, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int NamespaceUpvarCmd(ClientData dummy, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int NamespaceUnknownCmd(ClientData dummy, Tcl_Interp *interp,int objc,Tcl_Obj *const objv[]); static int NamespaceWhichCmd(ClientData dummy, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int SetNsNameFromAny(Tcl_Interp *interp, Tcl_Obj *objPtr); static void UnlinkNsPath(Namespace *nsPtr); static Tcl_NRPostProc NsEval_Callback; /* * This structure defines a Tcl object type that contains a namespace * reference. It is used in commands that take the name of a namespace as an * argument. The namespace reference is resolved, and the result in cached in * the object. */ static const Tcl_ObjType nsNameType = { "nsName", /* the type's name */ FreeNsNameInternalRep, /* freeIntRepProc */ DupNsNameInternalRep, /* dupIntRepProc */ NULL, /* updateStringProc */ SetNsNameFromAny /* setFromAnyProc */ }; /* * Array of values describing how to implement each standard subcommand of the * "namespace" command. */ static const EnsembleImplMap defaultNamespaceMap[] = { {"children", NamespaceChildrenCmd}, {"code", NamespaceCodeCmd}, {"current", NamespaceCurrentCmd}, {"delete", NamespaceDeleteCmd}, {"ensemble", TclNamespaceEnsembleCmd}, {"eval", NamespaceEvalCmd, NULL, NRNamespaceEvalCmd}, {"exists", NamespaceExistsCmd}, {"export", NamespaceExportCmd}, {"forget", NamespaceForgetCmd}, {"import", NamespaceImportCmd}, {"inscope", NamespaceInscopeCmd, NULL, NRNamespaceInscopeCmd}, {"origin", NamespaceOriginCmd}, {"parent", NamespaceParentCmd}, {"path", NamespacePathCmd}, {"qualifiers", NamespaceQualifiersCmd}, {"tail", NamespaceTailCmd}, {"unknown", NamespaceUnknownCmd}, {"upvar", NamespaceUpvarCmd, TclCompileNamespaceUpvarCmd}, {"which", NamespaceWhichCmd}, {NULL, NULL, NULL, NULL, NULL, 0} }; /* *---------------------------------------------------------------------- * * TclInitNamespaceSubsystem -- * * This function is called to initialize all the structures that are used * by namespaces on a per-process basis. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ void TclInitNamespaceSubsystem(void) { /* * Does nothing for now. */ } /* *---------------------------------------------------------------------- * * Tcl_GetCurrentNamespace -- * * Returns a pointer to an interpreter's currently active namespace. * * Results: * Returns a pointer to the interpreter's current namespace. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Namespace * Tcl_GetCurrentNamespace( register Tcl_Interp *interp)/* Interpreter whose current namespace is * being queried. */ { return TclGetCurrentNamespace(interp); } /* *---------------------------------------------------------------------- * * Tcl_GetGlobalNamespace -- * * Returns a pointer to an interpreter's global :: namespace. * * Results: * Returns a pointer to the specified interpreter's global namespace. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Namespace * Tcl_GetGlobalNamespace( register Tcl_Interp *interp)/* Interpreter whose global namespace should * be returned. */ { return TclGetGlobalNamespace(interp); } /* *---------------------------------------------------------------------- * * Tcl_PushCallFrame -- * * Pushes a new call frame onto the interpreter's Tcl call stack. Called * when executing a Tcl procedure or a "namespace eval" or "namespace * inscope" command. * * Results: * Returns TCL_OK if successful, or TCL_ERROR (along with an error * message in the interpreter's result object) if something goes wrong. * * Side effects: * Modifies the interpreter's Tcl call stack. * *---------------------------------------------------------------------- */ int Tcl_PushCallFrame( Tcl_Interp *interp, /* Interpreter in which the new call frame is * to be pushed. */ Tcl_CallFrame *callFramePtr,/* Points to a call frame structure to push. * Storage for this has already been allocated * by the caller; typically this is the * address of a CallFrame structure allocated * on the caller's C stack. The call frame * will be initialized by this function. The * caller can pop the frame later with * Tcl_PopCallFrame, and it is responsible for * freeing the frame's storage. */ Tcl_Namespace *namespacePtr,/* Points to the namespace in which the frame * will execute. If NULL, the interpreter's * current namespace will be used. */ int isProcCallFrame) /* If nonzero, the frame represents a called * Tcl procedure and may have local vars. Vars * will ordinarily be looked up in the frame. * If new variables are created, they will be * created in the frame. If 0, the frame is * for a "namespace eval" or "namespace * inscope" command and var references are * treated as references to namespace * variables. */ { Interp *iPtr = (Interp *) interp; register CallFrame *framePtr = (CallFrame *) callFramePtr; register Namespace *nsPtr; if (namespacePtr == NULL) { nsPtr = (Namespace *) TclGetCurrentNamespace(interp); } else { nsPtr = (Namespace *) namespacePtr; /* * TODO: Examine whether it would be better to guard based on NS_DYING * or NS_KILLED. It appears that these are not tested because they can * be set in a global interp that has been [namespace delete]d, but * which never really completely goes away because of lingering global * things like ::errorInfo and [::unknown] and hidden commands. * Review of those designs might permit stricter checking here. */ if (nsPtr->flags & NS_DEAD) { Tcl_Panic("Trying to push call frame for dead namespace"); /*NOTREACHED*/ } } nsPtr->activationCount++; framePtr->nsPtr = nsPtr; framePtr->isProcCallFrame = isProcCallFrame; framePtr->objc = 0; framePtr->objv = NULL; framePtr->callerPtr = iPtr->framePtr; framePtr->callerVarPtr = iPtr->varFramePtr; if (iPtr->varFramePtr != NULL) { framePtr->level = (iPtr->varFramePtr->level + 1); } else { framePtr->level = 0; } framePtr->procPtr = NULL; /* no called procedure */ framePtr->varTablePtr = NULL; /* and no local variables */ framePtr->numCompiledLocals = 0; framePtr->compiledLocals = NULL; framePtr->clientData = NULL; framePtr->localCachePtr = NULL; framePtr->tailcallPtr = NULL; /* * Push the new call frame onto the interpreter's stack of procedure call * frames making it the current frame. */ iPtr->framePtr = framePtr; iPtr->varFramePtr = framePtr; return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_PopCallFrame -- * * Removes a call frame from the Tcl call stack for the interpreter. * Called to remove a frame previously pushed by Tcl_PushCallFrame. * * Results: * None. * * Side effects: * Modifies the call stack of the interpreter. Resets various fields of * the popped call frame. If a namespace has been deleted and has no more * activations on the call stack, the namespace is destroyed. * *---------------------------------------------------------------------- */ void Tcl_PopCallFrame( Tcl_Interp *interp) /* Interpreter with call frame to pop. */ { register Interp *iPtr = (Interp *) interp; register CallFrame *framePtr = iPtr->framePtr; Namespace *nsPtr; /* * It's important to remove the call frame from the interpreter's stack of * call frames before deleting local variables, so that traces invoked by * the variable deletion don't see the partially-deleted frame. */ if (framePtr->callerPtr) { iPtr->framePtr = framePtr->callerPtr; iPtr->varFramePtr = framePtr->callerVarPtr; } else { /* Tcl_PopCallFrame: trying to pop rootCallFrame! */ } if (framePtr->varTablePtr != NULL) { TclDeleteVars(iPtr, framePtr->varTablePtr); ckfree(framePtr->varTablePtr); framePtr->varTablePtr = NULL; } if (framePtr->numCompiledLocals > 0) { TclDeleteCompiledLocalVars(iPtr, framePtr); if (--framePtr->localCachePtr->refCount == 0) { TclFreeLocalCache(interp, framePtr->localCachePtr); } framePtr->localCachePtr = NULL; } /* * Decrement the namespace's count of active call frames. If the namespace * is "dying" and there are no more active call frames, call * Tcl_DeleteNamespace to destroy it. */ nsPtr = framePtr->nsPtr; nsPtr->activationCount--; if ((nsPtr->flags & NS_DYING) && (nsPtr->activationCount - (nsPtr == iPtr->globalNsPtr) == 0)) { Tcl_DeleteNamespace((Tcl_Namespace *) nsPtr); } framePtr->nsPtr = NULL; if (framePtr->tailcallPtr) { TclSpliceTailcall(interp, framePtr->tailcallPtr); } } /* *---------------------------------------------------------------------- * * TclPushStackFrame -- * * Allocates a new call frame in the interpreter's execution stack, then * pushes it onto the interpreter's Tcl call stack. Called when executing * a Tcl procedure or a "namespace eval" or "namespace inscope" command. * * Results: * Returns TCL_OK if successful, or TCL_ERROR (along with an error * message in the interpreter's result object) if something goes wrong. * * Side effects: * Modifies the interpreter's Tcl call stack. * *---------------------------------------------------------------------- */ int TclPushStackFrame( Tcl_Interp *interp, /* Interpreter in which the new call frame is * to be pushed. */ Tcl_CallFrame **framePtrPtr,/* Place to store a pointer to the stack * allocated call frame. */ Tcl_Namespace *namespacePtr,/* Points to the namespace in which the frame * will execute. If NULL, the interpreter's * current namespace will be used. */ int isProcCallFrame) /* If nonzero, the frame represents a called * Tcl procedure and may have local vars. Vars * will ordinarily be looked up in the frame. * If new variables are created, they will be * created in the frame. If 0, the frame is * for a "namespace eval" or "namespace * inscope" command and var references are * treated as references to namespace * variables. */ { *framePtrPtr = TclStackAlloc(interp, sizeof(CallFrame)); return Tcl_PushCallFrame(interp, *framePtrPtr, namespacePtr, isProcCallFrame); } void TclPopStackFrame( Tcl_Interp *interp) /* Interpreter with call frame to pop. */ { CallFrame *freePtr = ((Interp *) interp)->framePtr; Tcl_PopCallFrame(interp); TclStackFree(interp, freePtr); } /* *---------------------------------------------------------------------- * * EstablishErrorCodeTraces -- * * Creates traces on the ::errorCode variable to keep its value * consistent with the expectations of legacy code. * * Results: * None. * * Side effects: * Read and unset traces are established on ::errorCode. * *---------------------------------------------------------------------- */ static char * EstablishErrorCodeTraces( ClientData clientData, Tcl_Interp *interp, const char *name1, const char *name2, int flags) { Tcl_TraceVar(interp, "errorCode", TCL_GLOBAL_ONLY | TCL_TRACE_READS, ErrorCodeRead, NULL); Tcl_TraceVar(interp, "errorCode", TCL_GLOBAL_ONLY | TCL_TRACE_UNSETS, EstablishErrorCodeTraces, NULL); return NULL; } /* *---------------------------------------------------------------------- * * ErrorCodeRead -- * * Called when the ::errorCode variable is read. Copies the current value * of the interp's errorCode field into ::errorCode. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ static char * ErrorCodeRead( ClientData clientData, Tcl_Interp *interp, const char *name1, const char *name2, int flags) { Interp *iPtr = (Interp *) interp; if (Tcl_InterpDeleted(interp) || !(iPtr->flags & ERR_LEGACY_COPY)) { return NULL; } if (iPtr->errorCode) { Tcl_ObjSetVar2(interp, iPtr->ecVar, NULL, iPtr->errorCode, TCL_GLOBAL_ONLY); return NULL; } if (NULL == Tcl_ObjGetVar2(interp, iPtr->ecVar, NULL, TCL_GLOBAL_ONLY)) { Tcl_ObjSetVar2(interp, iPtr->ecVar, NULL, Tcl_NewObj(), TCL_GLOBAL_ONLY); } return NULL; } /* *---------------------------------------------------------------------- * * EstablishErrorInfoTraces -- * * Creates traces on the ::errorInfo variable to keep its value * consistent with the expectations of legacy code. * * Results: * None. * * Side effects: * Read and unset traces are established on ::errorInfo. * *---------------------------------------------------------------------- */ static char * EstablishErrorInfoTraces( ClientData clientData, Tcl_Interp *interp, const char *name1, const char *name2, int flags) { Tcl_TraceVar(interp, "errorInfo", TCL_GLOBAL_ONLY | TCL_TRACE_READS, ErrorInfoRead, NULL); Tcl_TraceVar(interp, "errorInfo", TCL_GLOBAL_ONLY | TCL_TRACE_UNSETS, EstablishErrorInfoTraces, NULL); return NULL; } /* *---------------------------------------------------------------------- * * ErrorInfoRead -- * * Called when the ::errorInfo variable is read. Copies the current value * of the interp's errorInfo field into ::errorInfo. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ static char * ErrorInfoRead( ClientData clientData, Tcl_Interp *interp, const char *name1, const char *name2, int flags) { Interp *iPtr = (Interp *) interp; if (Tcl_InterpDeleted(interp) || !(iPtr->flags & ERR_LEGACY_COPY)) { return NULL; } if (iPtr->errorInfo) { Tcl_ObjSetVar2(interp, iPtr->eiVar, NULL, iPtr->errorInfo, TCL_GLOBAL_ONLY); return NULL; } if (NULL == Tcl_ObjGetVar2(interp, iPtr->eiVar, NULL, TCL_GLOBAL_ONLY)) { Tcl_ObjSetVar2(interp, iPtr->eiVar, NULL, Tcl_NewObj(), TCL_GLOBAL_ONLY); } return NULL; } /* *---------------------------------------------------------------------- * * Tcl_CreateNamespace -- * * Creates a new namespace with the given name. If there is no active * namespace (i.e., the interpreter is being initialized), the global :: * namespace is created and returned. * * Results: * Returns a pointer to the new namespace if successful. If the namespace * already exists or if another error occurs, this routine returns NULL, * along with an error message in the interpreter's result object. * * Side effects: * If the name contains "::" qualifiers and a parent namespace does not * already exist, it is automatically created. * *---------------------------------------------------------------------- */ Tcl_Namespace * Tcl_CreateNamespace( Tcl_Interp *interp, /* Interpreter in which a new namespace is * being created. Also used for error * reporting. */ const char *name, /* Name for the new namespace. May be a * qualified name with names of ancestor * namespaces separated by "::"s. */ ClientData clientData, /* One-word value to store with namespace. */ Tcl_NamespaceDeleteProc *deleteProc) /* Function called to delete client data when * the namespace is deleted. NULL if no * function should be called. */ { Interp *iPtr = (Interp *) interp; register Namespace *nsPtr, *ancestorPtr; Namespace *parentPtr, *dummy1Ptr, *dummy2Ptr; Namespace *globalNsPtr = iPtr->globalNsPtr; const char *simpleName; Tcl_HashEntry *entryPtr; Tcl_DString buffer1, buffer2; Tcl_DString *namePtr, *buffPtr; int newEntry, nameLen; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&dataKey); /* * If there is no active namespace, the interpreter is being initialized. */ if ((globalNsPtr == NULL) && (iPtr->varFramePtr == NULL)) { /* * Treat this namespace as the global namespace, and avoid looking for * a parent. */ parentPtr = NULL; simpleName = ""; } else if (*name == '\0') { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "can't create namespace \"\": " "only global namespace can have empty name", NULL); return NULL; } else { /* * Find the parent for the new namespace. */ TclGetNamespaceForQualName(interp, name, NULL, /*flags*/ (TCL_CREATE_NS_IF_UNKNOWN | TCL_LEAVE_ERR_MSG), &parentPtr, &dummy1Ptr, &dummy2Ptr, &simpleName); /* * If the unqualified name at the end is empty, there were trailing * "::"s after the namespace's name which we ignore. The new namespace * was already (recursively) created and is pointed to by parentPtr. */ if (*simpleName == '\0') { return (Tcl_Namespace *) parentPtr; } /* * Check for a bad namespace name and make sure that the name does not * already exist in the parent namespace. */ if ( #ifndef BREAK_NAMESPACE_COMPAT Tcl_FindHashEntry(&parentPtr->childTable, simpleName) != NULL #else parentPtr->childTablePtr != NULL && Tcl_FindHashEntry(parentPtr->childTablePtr, simpleName) != NULL #endif ) { Tcl_AppendResult(interp, "can't create namespace \"", name, "\": already exists", NULL); return NULL; } } /* * Create the new namespace and root it in its parent. Increment the count * of namespaces created. */ nsPtr = ckalloc(sizeof(Namespace)); nameLen = strlen(simpleName) + 1; nsPtr->name = ckalloc(nameLen); memcpy(nsPtr->name, simpleName, nameLen); nsPtr->fullName = NULL; /* Set below. */ nsPtr->clientData = clientData; nsPtr->deleteProc = deleteProc; nsPtr->parentPtr = parentPtr; #ifndef BREAK_NAMESPACE_COMPAT Tcl_InitHashTable(&nsPtr->childTable, TCL_STRING_KEYS); #else nsPtr->childTablePtr = NULL; #endif nsPtr->nsId = ++(tsdPtr->numNsCreated); nsPtr->interp = interp; nsPtr->flags = 0; nsPtr->activationCount = 0; nsPtr->refCount = 0; Tcl_InitHashTable(&nsPtr->cmdTable, TCL_STRING_KEYS); TclInitVarHashTable(&nsPtr->varTable, nsPtr); nsPtr->exportArrayPtr = NULL; nsPtr->numExportPatterns = 0; nsPtr->maxExportPatterns = 0; nsPtr->cmdRefEpoch = 0; nsPtr->resolverEpoch = 0; nsPtr->cmdResProc = NULL; nsPtr->varResProc = NULL; nsPtr->compiledVarResProc = NULL; nsPtr->exportLookupEpoch = 0; nsPtr->ensembles = NULL; nsPtr->unknownHandlerPtr = NULL; nsPtr->commandPathLength = 0; nsPtr->commandPathArray = NULL; nsPtr->commandPathSourceList = NULL; nsPtr->earlyDeleteProc = NULL; if (parentPtr != NULL) { entryPtr = Tcl_CreateHashEntry( TclGetNamespaceChildTable((Tcl_Namespace *) parentPtr), simpleName, &newEntry); Tcl_SetHashValue(entryPtr, nsPtr); } else { /* * In the global namespace create traces to maintain the ::errorInfo * and ::errorCode variables. */ iPtr->globalNsPtr = nsPtr; EstablishErrorInfoTraces(NULL, interp, NULL, NULL, 0); EstablishErrorCodeTraces(NULL, interp, NULL, NULL, 0); } /* * Build the fully qualified name for this namespace. */ Tcl_DStringInit(&buffer1); Tcl_DStringInit(&buffer2); namePtr = &buffer1; buffPtr = &buffer2; for (ancestorPtr = nsPtr; ancestorPtr != NULL; ancestorPtr = ancestorPtr->parentPtr) { if (ancestorPtr != globalNsPtr) { register Tcl_DString *tempPtr = namePtr; Tcl_DStringAppend(buffPtr, "::", 2); Tcl_DStringAppend(buffPtr, ancestorPtr->name, -1); Tcl_DStringAppend(buffPtr, Tcl_DStringValue(namePtr), Tcl_DStringLength(namePtr)); /* * Clear the unwanted buffer or we end up appending to previous * results, making the namespace fullNames of nested namespaces * very wrong (and strange). */ Tcl_DStringSetLength(namePtr, 0); /* * Now swap the buffer pointers so that we build in the other * buffer. This is faster than repeated copying back and forth * between buffers. */ namePtr = buffPtr; buffPtr = tempPtr; } } name = Tcl_DStringValue(namePtr); nameLen = Tcl_DStringLength(namePtr); nsPtr->fullName = ckalloc(nameLen + 1); memcpy(nsPtr->fullName, name, (unsigned) nameLen + 1); Tcl_DStringFree(&buffer1); Tcl_DStringFree(&buffer2); /* * If compilation of commands originating from the parent NS is * suppressed, suppress it for commands originating in this one too. */ if (nsPtr->parentPtr != NULL && nsPtr->parentPtr->flags & NS_SUPPRESS_COMPILATION) { nsPtr->flags |= NS_SUPPRESS_COMPILATION; } /* * Return a pointer to the new namespace. */ return (Tcl_Namespace *) nsPtr; } /* *---------------------------------------------------------------------- * * Tcl_DeleteNamespace -- * * Deletes a namespace and all of the commands, variables, and other * namespaces within it. * * Results: * None. * * Side effects: * When a namespace is deleted, it is automatically removed as a child of * its parent namespace. Also, all its commands, variables and child * namespaces are deleted. * *---------------------------------------------------------------------- */ void Tcl_DeleteNamespace( Tcl_Namespace *namespacePtr)/* Points to the namespace to delete. */ { register Namespace *nsPtr = (Namespace *) namespacePtr; Interp *iPtr = (Interp *) nsPtr->interp; Namespace *globalNsPtr = (Namespace *) TclGetGlobalNamespace((Tcl_Interp *) iPtr); Tcl_HashEntry *entryPtr; Tcl_HashSearch search; Command *cmdPtr; /* * Give anyone interested - notably TclOO - a chance to use this namespace * normally despite the fact that the namespace is going to go. Allows the * calling of destructors. Will only be called once (unless re-established * by the called function). [Bug 2950259] * * Note that setting this field requires access to the internal definition * of namespaces, so it should only be accessed by code that knows about * being careful with reentrancy. */ if (nsPtr->earlyDeleteProc != NULL) { Tcl_NamespaceDeleteProc *earlyDeleteProc = nsPtr->earlyDeleteProc; nsPtr->earlyDeleteProc = NULL; nsPtr->activationCount++; earlyDeleteProc(nsPtr->clientData); nsPtr->activationCount--; } /* * Delete all coroutine commands now: break the circular ref cycle between * the namespace and the coroutine command [Bug 2724403]. This code is * essentially duplicated in TclTeardownNamespace() for all other * commands. Don't optimize to Tcl_NextHashEntry() because of traces. * * NOTE: we could avoid traversing the ns's command list by keeping a * separate list of coros. */ for (entryPtr = Tcl_FirstHashEntry(&nsPtr->cmdTable, &search); entryPtr != NULL;) { cmdPtr = Tcl_GetHashValue(entryPtr); if (cmdPtr->nreProc == NRInterpCoroutine) { Tcl_DeleteCommandFromToken((Tcl_Interp *) iPtr, (Tcl_Command) cmdPtr); entryPtr = Tcl_FirstHashEntry(&nsPtr->cmdTable, &search); } else { entryPtr = Tcl_NextHashEntry(&search); } } /* * If the namespace has associated ensemble commands, delete them first. * This leaves the actual contents of the namespace alone (unless they are * linked ensemble commands, of course). Note that this code is actually * reentrant so command delete traces won't purturb things badly. */ while (nsPtr->ensembles != NULL) { EnsembleConfig *ensemblePtr = (EnsembleConfig *) nsPtr->ensembles; /* * Splice out and link to indicate that we've already been killed. */ nsPtr->ensembles = (Tcl_Ensemble *) ensemblePtr->next; ensemblePtr->next = ensemblePtr; Tcl_DeleteCommandFromToken(nsPtr->interp, ensemblePtr->token); } /* * If the namespace has a registered unknown handler (TIP 181), then free * it here. */ if (nsPtr->unknownHandlerPtr != NULL) { Tcl_DecrRefCount(nsPtr->unknownHandlerPtr); nsPtr->unknownHandlerPtr = NULL; } /* * If the namespace is on the call frame stack, it is marked as "dying" * (NS_DYING is OR'd into its flags): the namespace can't be looked up by * name but its commands and variables are still usable by those active * call frames. When all active call frames referring to the namespace * have been popped from the Tcl stack, Tcl_PopCallFrame will call this * function again to delete everything in the namespace. If no nsName * objects refer to the namespace (i.e., if its refCount is zero), its * commands and variables are deleted and the storage for its namespace * structure is freed. Otherwise, if its refCount is nonzero, the * namespace's commands and variables are deleted but the structure isn't * freed. Instead, NS_DEAD is OR'd into the structure's flags to allow the * namespace resolution code to recognize that the namespace is "deleted". * The structure's storage is freed by FreeNsNameInternalRep when its * refCount reaches 0. */ if (nsPtr->activationCount - (nsPtr == globalNsPtr) > 0) { nsPtr->flags |= NS_DYING; if (nsPtr->parentPtr != NULL) { entryPtr = Tcl_FindHashEntry( TclGetNamespaceChildTable((Tcl_Namespace *) nsPtr->parentPtr), nsPtr->name); if (entryPtr != NULL) { Tcl_DeleteHashEntry(entryPtr); } } nsPtr->parentPtr = NULL; } else if (!(nsPtr->flags & NS_KILLED)) { /* * Delete the namespace and everything in it. If this is the global * namespace, then clear it but don't free its storage unless the * interpreter is being torn down. Set the NS_KILLED flag to avoid * recursive calls here - if the namespace is really in the process of * being deleted, ignore any second call. */ nsPtr->flags |= (NS_DYING|NS_KILLED); TclTeardownNamespace(nsPtr); if ((nsPtr != globalNsPtr) || (iPtr->flags & DELETED)) { /* * If this is the global namespace, then it may have residual * "errorInfo" and "errorCode" variables for errors that occurred * while it was being torn down. Try to clear the variable list * one last time. */ TclDeleteNamespaceVars(nsPtr); #ifndef BREAK_NAMESPACE_COMPAT Tcl_DeleteHashTable(&nsPtr->childTable); #else if (nsPtr->childTablePtr != NULL) { Tcl_DeleteHashTable(nsPtr->childTablePtr); ckfree(nsPtr->childTablePtr); } #endif Tcl_DeleteHashTable(&nsPtr->cmdTable); /* * If the reference count is 0, then discard the namespace. * Otherwise, mark it as "dead" so that it can't be used. */ if (nsPtr->refCount == 0) { NamespaceFree(nsPtr); } else { nsPtr->flags |= NS_DEAD; } } else { /* * Restore the ::errorInfo and ::errorCode traces. */ EstablishErrorInfoTraces(NULL, nsPtr->interp, NULL, NULL, 0); EstablishErrorCodeTraces(NULL, nsPtr->interp, NULL, NULL, 0); /* * We didn't really kill it, so remove the KILLED marks, so it can * get killed later, avoiding mem leaks. */ nsPtr->flags &= ~(NS_DYING|NS_KILLED); } } } /* *---------------------------------------------------------------------- * * TclTeardownNamespace -- * * Used internally to dismantle and unlink a namespace when it is * deleted. Divorces the namespace from its parent, and deletes all * commands, variables, and child namespaces. * * This is kept separate from Tcl_DeleteNamespace so that the global * namespace can be handled specially. * * Results: * None. * * Side effects: * Removes this namespace from its parent's child namespace hashtable. * Deletes all commands, variables and namespaces in this namespace. * *---------------------------------------------------------------------- */ void TclTeardownNamespace( register Namespace *nsPtr) /* Points to the namespace to be dismantled * and unlinked from its parent. */ { Interp *iPtr = (Interp *) nsPtr->interp; register Tcl_HashEntry *entryPtr; Tcl_HashSearch search; Tcl_Namespace *childNsPtr; Tcl_Command cmd; int i; /* * Start by destroying the namespace's variable table, since variables * might trigger traces. Variable table should be cleared but not freed! * TclDeleteNamespaceVars frees it, so we reinitialize it afterwards. */ TclDeleteNamespaceVars(nsPtr); TclInitVarHashTable(&nsPtr->varTable, nsPtr); /* * Delete all commands in this namespace. Be careful when traversing the * hash table: when each command is deleted, it removes itself from the * command table. * * Don't optimize to Tcl_NextHashEntry() because of traces. */ for (entryPtr = Tcl_FirstHashEntry(&nsPtr->cmdTable, &search); entryPtr != NULL; entryPtr = Tcl_FirstHashEntry(&nsPtr->cmdTable, &search)) { cmd = Tcl_GetHashValue(entryPtr); Tcl_DeleteCommandFromToken((Tcl_Interp *) iPtr, cmd); } Tcl_DeleteHashTable(&nsPtr->cmdTable); Tcl_InitHashTable(&nsPtr->cmdTable, TCL_STRING_KEYS); /* * Remove the namespace from its parent's child hashtable. */ if (nsPtr->parentPtr != NULL) { entryPtr = Tcl_FindHashEntry( TclGetNamespaceChildTable((Tcl_Namespace *) nsPtr->parentPtr), nsPtr->name); if (entryPtr != NULL) { Tcl_DeleteHashEntry(entryPtr); } } nsPtr->parentPtr = NULL; /* * Delete the namespace path if one is installed. */ if (nsPtr->commandPathLength != 0) { UnlinkNsPath(nsPtr); nsPtr->commandPathLength = 0; } if (nsPtr->commandPathSourceList != NULL) { NamespacePathEntry *nsPathPtr = nsPtr->commandPathSourceList; do { if (nsPathPtr->nsPtr != NULL && nsPathPtr->creatorNsPtr != NULL) { nsPathPtr->creatorNsPtr->cmdRefEpoch++; } nsPathPtr->nsPtr = NULL; nsPathPtr = nsPathPtr->nextPtr; } while (nsPathPtr != NULL); nsPtr->commandPathSourceList = NULL; } /* * Delete all the child namespaces. * * BE CAREFUL: When each child is deleted, it will divorce itself from its * parent. You can't traverse a hash table properly if its elements are * being deleted. We use only the Tcl_FirstHashEntry function to be safe. * * Don't optimize to Tcl_NextHashEntry() because of traces. */ #ifndef BREAK_NAMESPACE_COMPAT for (entryPtr = Tcl_FirstHashEntry(&nsPtr->childTable, &search); entryPtr != NULL; entryPtr = Tcl_FirstHashEntry(&nsPtr->childTable, &search)) { childNsPtr = Tcl_GetHashValue(entryPtr); Tcl_DeleteNamespace(childNsPtr); } #else if (nsPtr->childTablePtr != NULL) { for (entryPtr = Tcl_FirstHashEntry(nsPtr->childTablePtr, &search); entryPtr != NULL; entryPtr = Tcl_FirstHashEntry(nsPtr->childTablePtr,&search)) { childNsPtr = Tcl_GetHashValue(entryPtr); Tcl_DeleteNamespace(childNsPtr); } } #endif /* * Free the namespace's export pattern array. */ if (nsPtr->exportArrayPtr != NULL) { for (i = 0; i < nsPtr->numExportPatterns; i++) { ckfree(nsPtr->exportArrayPtr[i]); } ckfree(nsPtr->exportArrayPtr); nsPtr->exportArrayPtr = NULL; nsPtr->numExportPatterns = 0; nsPtr->maxExportPatterns = 0; } /* * Free any client data associated with the namespace. */ if (nsPtr->deleteProc != NULL) { nsPtr->deleteProc(nsPtr->clientData); } nsPtr->deleteProc = NULL; nsPtr->clientData = NULL; /* * Reset the namespace's id field to ensure that this namespace won't be * interpreted as valid by, e.g., the cache validation code for cached * command references in Tcl_GetCommandFromObj. */ nsPtr->nsId = 0; } /* *---------------------------------------------------------------------- * * NamespaceFree -- * * Called after a namespace has been deleted, when its reference count * reaches 0. Frees the data structure representing the namespace. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ static void NamespaceFree( register Namespace *nsPtr) /* Points to the namespace to free. */ { /* * Most of the namespace's contents are freed when the namespace is * deleted by Tcl_DeleteNamespace. All that remains is to free its names * (for error messages), and the structure itself. */ ckfree(nsPtr->name); ckfree(nsPtr->fullName); ckfree(nsPtr); } /* *---------------------------------------------------------------------- * * TclNsDecrRefCount -- * * Drops a reference to a namespace and frees it if the namespace has * been deleted and the last reference has just been dropped. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ void TclNsDecrRefCount( Namespace *nsPtr) { nsPtr->refCount--; if ((nsPtr->refCount == 0) && (nsPtr->flags & NS_DEAD)) { NamespaceFree(nsPtr); } } /* *---------------------------------------------------------------------- * * Tcl_Export -- * * Makes all the commands matching a pattern available to later be * imported from the namespace specified by namespacePtr (or the current * namespace if namespacePtr is NULL). The specified pattern is appended * onto the namespace's export pattern list, which is optionally cleared * beforehand. * * Results: * Returns TCL_OK if successful, or TCL_ERROR (along with an error * message in the interpreter's result) if something goes wrong. * * Side effects: * Appends the export pattern onto the namespace's export list. * Optionally reset the namespace's export pattern list. * *---------------------------------------------------------------------- */ int Tcl_Export( Tcl_Interp *interp, /* Current interpreter. */ Tcl_Namespace *namespacePtr,/* Points to the namespace from which commands * are to be exported. NULL for the current * namespace. */ const char *pattern, /* String pattern indicating which commands to * export. This pattern may not include any * namespace qualifiers; only commands in the * specified namespace may be exported. */ int resetListFirst) /* If nonzero, resets the namespace's export * list before appending. */ { #define INIT_EXPORT_PATTERNS 5 Namespace *nsPtr, *exportNsPtr, *dummyPtr; Namespace *currNsPtr = (Namespace *) TclGetCurrentNamespace(interp); const char *simplePattern; char *patternCpy; int neededElems, len, i; /* * If the specified namespace is NULL, use the current namespace. */ if (namespacePtr == NULL) { nsPtr = (Namespace *) currNsPtr; } else { nsPtr = (Namespace *) namespacePtr; } /* * If resetListFirst is true (nonzero), clear the namespace's export * pattern list. */ if (resetListFirst) { if (nsPtr->exportArrayPtr != NULL) { for (i = 0; i < nsPtr->numExportPatterns; i++) { ckfree(nsPtr->exportArrayPtr[i]); } ckfree(nsPtr->exportArrayPtr); nsPtr->exportArrayPtr = NULL; TclInvalidateNsCmdLookup(nsPtr); nsPtr->numExportPatterns = 0; nsPtr->maxExportPatterns = 0; } } /* * Check that the pattern doesn't have namespace qualifiers. */ TclGetNamespaceForQualName(interp, pattern, nsPtr, /*flags*/ (TCL_LEAVE_ERR_MSG | TCL_NAMESPACE_ONLY), &exportNsPtr, &dummyPtr, &dummyPtr, &simplePattern); if ((exportNsPtr != nsPtr) || (strcmp(pattern, simplePattern) != 0)) { Tcl_AppendResult(interp, "invalid export pattern \"", pattern, "\": pattern can't specify a namespace", NULL); Tcl_SetErrorCode(interp, "TCL", "EXPORT", "INVALID", NULL); return TCL_ERROR; } /* * Make sure that we don't already have the pattern in the array */ if (nsPtr->exportArrayPtr != NULL) { for (i = 0; i < nsPtr->numExportPatterns; i++) { if (strcmp(pattern, nsPtr->exportArrayPtr[i]) == 0) { /* * The pattern already exists in the list. */ return TCL_OK; } } } /* * Make sure there is room in the namespace's pattern array for the new * pattern. */ neededElems = nsPtr->numExportPatterns + 1; if (neededElems > nsPtr->maxExportPatterns) { nsPtr->maxExportPatterns = nsPtr->maxExportPatterns ? 2 * nsPtr->maxExportPatterns : INIT_EXPORT_PATTERNS; nsPtr->exportArrayPtr = ckrealloc(nsPtr->exportArrayPtr, sizeof(char *) * nsPtr->maxExportPatterns); } /* * Add the pattern to the namespace's array of export patterns. */ len = strlen(pattern); patternCpy = ckalloc(len + 1); memcpy(patternCpy, pattern, (unsigned) len + 1); nsPtr->exportArrayPtr[nsPtr->numExportPatterns] = patternCpy; nsPtr->numExportPatterns++; /* * The list of commands actually exported from the namespace might have * changed (probably will have!) However, we do not need to recompute this * just yet; next time we need the info will be soon enough. */ TclInvalidateNsCmdLookup(nsPtr); return TCL_OK; #undef INIT_EXPORT_PATTERNS } /* *---------------------------------------------------------------------- * * Tcl_AppendExportList -- * * Appends onto the argument object the list of export patterns for the * specified namespace. * * Results: * The return value is normally TCL_OK; in this case the object * referenced by objPtr has each export pattern appended to it. If an * error occurs, TCL_ERROR is returned and the interpreter's result holds * an error message. * * Side effects: * If necessary, the object referenced by objPtr is converted into a list * object. * *---------------------------------------------------------------------- */ int Tcl_AppendExportList( Tcl_Interp *interp, /* Interpreter used for error reporting. */ Tcl_Namespace *namespacePtr,/* Points to the namespace whose export * pattern list is appended onto objPtr. NULL * for the current namespace. */ Tcl_Obj *objPtr) /* Points to the Tcl object onto which the * export pattern list is appended. */ { Namespace *nsPtr; int i, result; /* * If the specified namespace is NULL, use the current namespace. */ if (namespacePtr == NULL) { nsPtr = (Namespace *) TclGetCurrentNamespace(interp); } else { nsPtr = (Namespace *) namespacePtr; } /* * Append the export pattern list onto objPtr. */ for (i = 0; i < nsPtr->numExportPatterns; i++) { result = Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(nsPtr->exportArrayPtr[i], -1)); if (result != TCL_OK) { return result; } } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_Import -- * * Imports all of the commands matching a pattern into the namespace * specified by namespacePtr (or the current namespace if contextNsPtr is * NULL). This is done by creating a new command (the "imported command") * that points to the real command in its original namespace. * * If matching commands are on the autoload path but haven't been loaded * yet, this command forces them to be loaded, then creates the links to * them. * * Results: * Returns TCL_OK if successful, or TCL_ERROR (along with an error * message in the interpreter's result) if something goes wrong. * * Side effects: * Creates new commands in the importing namespace. These indirect calls * back to the real command and are deleted if the real commands are * deleted. * *---------------------------------------------------------------------- */ int Tcl_Import( Tcl_Interp *interp, /* Current interpreter. */ Tcl_Namespace *namespacePtr,/* Points to the namespace into which the * commands are to be imported. NULL for the * current namespace. */ const char *pattern, /* String pattern indicating which commands to * import. This pattern should be qualified by * the name of the namespace from which to * import the command(s). */ int allowOverwrite) /* If nonzero, allow existing commands to be * overwritten by imported commands. If 0, * return an error if an imported cmd * conflicts with an existing one. */ { Namespace *nsPtr, *importNsPtr, *dummyPtr; const char *simplePattern; register Tcl_HashEntry *hPtr; Tcl_HashSearch search; /* * If the specified namespace is NULL, use the current namespace. */ if (namespacePtr == NULL) { nsPtr = (Namespace *) TclGetCurrentNamespace(interp); } else { nsPtr = (Namespace *) namespacePtr; } /* * First, invoke the "auto_import" command with the pattern being * imported. This command is part of the Tcl library. It looks for * imported commands in autoloaded libraries and loads them in. That way, * they will be found when we try to create links below. * * Note that we don't just call Tcl_EvalObjv() directly because we do not * want absence of the command to be a failure case. */ if (Tcl_FindCommand(interp,"auto_import",NULL,TCL_GLOBAL_ONLY) != NULL) { Tcl_Obj *objv[2]; int result; TclNewLiteralStringObj(objv[0], "auto_import"); objv[1] = Tcl_NewStringObj(pattern, -1); Tcl_IncrRefCount(objv[0]); Tcl_IncrRefCount(objv[1]); result = Tcl_EvalObjv(interp, 2, objv, TCL_GLOBAL_ONLY); Tcl_DecrRefCount(objv[0]); Tcl_DecrRefCount(objv[1]); if (result != TCL_OK) { return TCL_ERROR; } Tcl_ResetResult(interp); } /* * From the pattern, find the namespace from which we are importing and * get the simple pattern (no namespace qualifiers or ::'s) at the end. */ if (strlen(pattern) == 0) { Tcl_SetObjResult(interp, Tcl_NewStringObj("empty import pattern",-1)); Tcl_SetErrorCode(interp, "TCL", "IMPORT", "EMPTY", NULL); return TCL_ERROR; } TclGetNamespaceForQualName(interp, pattern, nsPtr, /*flags*/ (TCL_LEAVE_ERR_MSG | TCL_NAMESPACE_ONLY), &importNsPtr, &dummyPtr, &dummyPtr, &simplePattern); if (importNsPtr == NULL) { Tcl_AppendResult(interp, "unknown namespace in import pattern \"", pattern, "\"", NULL); Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "NAMESPACE", pattern, NULL); return TCL_ERROR; } if (importNsPtr == nsPtr) { if (pattern == simplePattern) { Tcl_AppendResult(interp, "no namespace specified in import pattern \"", pattern, "\"", NULL); Tcl_SetErrorCode(interp, "TCL", "IMPORT", "ORIGIN", NULL); } else { Tcl_AppendResult(interp, "import pattern \"", pattern, "\" tries to import from namespace \"", importNsPtr->name, "\" into itself", NULL); Tcl_SetErrorCode(interp, "TCL", "IMPORT", "SELF", NULL); } return TCL_ERROR; } /* * Scan through the command table in the source namespace and look for * exported commands that match the string pattern. Create an "imported * command" in the current namespace for each imported command; these * commands redirect their invocations to the "real" command. */ if ((simplePattern != NULL) && TclMatchIsTrivial(simplePattern)) { hPtr = Tcl_FindHashEntry(&importNsPtr->cmdTable, simplePattern); if (hPtr == NULL) { return TCL_OK; } return DoImport(interp, nsPtr, hPtr, simplePattern, pattern, importNsPtr, allowOverwrite); } for (hPtr = Tcl_FirstHashEntry(&importNsPtr->cmdTable, &search); (hPtr != NULL); hPtr = Tcl_NextHashEntry(&search)) { char *cmdName = Tcl_GetHashKey(&importNsPtr->cmdTable, hPtr); if (Tcl_StringMatch(cmdName, simplePattern) && DoImport(interp, nsPtr, hPtr, cmdName, pattern, importNsPtr, allowOverwrite) == TCL_ERROR) { return TCL_ERROR; } } return TCL_OK; } /* *---------------------------------------------------------------------- * * DoImport -- * * Import a particular command from one namespace into another. Helper * for Tcl_Import(). * * Results: * Standard Tcl result code. If TCL_ERROR, appends an error message to * the interpreter result. * * Side effects: * A new command is created in the target namespace unless this is a * reimport of exactly the same command as before. * *---------------------------------------------------------------------- */ static int DoImport( Tcl_Interp *interp, Namespace *nsPtr, Tcl_HashEntry *hPtr, const char *cmdName, const char *pattern, Namespace *importNsPtr, int allowOverwrite) { int i = 0, exported = 0; Tcl_HashEntry *found; /* * The command cmdName in the source namespace matches the pattern. Check * whether it was exported. If it wasn't, we ignore it. */ while (!exported && (i < importNsPtr->numExportPatterns)) { exported |= Tcl_StringMatch(cmdName, importNsPtr->exportArrayPtr[i++]); } if (!exported) { return TCL_OK; } /* * Unless there is a name clash, create an imported command in the current * namespace that refers to cmdPtr. */ found = Tcl_FindHashEntry(&nsPtr->cmdTable, cmdName); if ((found == NULL) || allowOverwrite) { /* * Create the imported command and its client data. To create the new * command in the current namespace, generate a fully qualified name * for it. */ Tcl_DString ds; Tcl_Command importedCmd; ImportedCmdData *dataPtr; Command *cmdPtr; ImportRef *refPtr; Tcl_DStringInit(&ds); Tcl_DStringAppend(&ds, nsPtr->fullName, -1); if (nsPtr != ((Interp *) interp)->globalNsPtr) { Tcl_DStringAppend(&ds, "::", 2); } Tcl_DStringAppend(&ds, cmdName, -1); /* * Check whether creating the new imported command in the current * namespace would create a cycle of imported command references. */ cmdPtr = Tcl_GetHashValue(hPtr); if (found != NULL && cmdPtr->deleteProc == DeleteImportedCmd) { Command *overwrite = Tcl_GetHashValue(found); Command *linkCmd = cmdPtr; while (linkCmd->deleteProc == DeleteImportedCmd) { dataPtr = linkCmd->objClientData; linkCmd = dataPtr->realCmdPtr; if (overwrite == linkCmd) { Tcl_AppendResult(interp, "import pattern \"", pattern, "\" would create a loop containing command \"", Tcl_DStringValue(&ds), "\"", NULL); Tcl_DStringFree(&ds); Tcl_SetErrorCode(interp, "TCL", "IMPORT", "LOOP", NULL); return TCL_ERROR; } } } dataPtr = ckalloc(sizeof(ImportedCmdData)); importedCmd = Tcl_NRCreateCommand(interp, Tcl_DStringValue(&ds), InvokeImportedCmd, InvokeImportedNRCmd, dataPtr, DeleteImportedCmd); dataPtr->realCmdPtr = cmdPtr; dataPtr->selfPtr = (Command *) importedCmd; dataPtr->selfPtr->compileProc = cmdPtr->compileProc; Tcl_DStringFree(&ds); /* * Create an ImportRef structure describing this new import command * and add it to the import ref list in the "real" command. */ refPtr = ckalloc(sizeof(ImportRef)); refPtr->importedCmdPtr = (Command *) importedCmd; refPtr->nextPtr = cmdPtr->importRefPtr; cmdPtr->importRefPtr = refPtr; } else { Command *overwrite = Tcl_GetHashValue(found); if (overwrite->deleteProc == DeleteImportedCmd) { ImportedCmdData *dataPtr = overwrite->objClientData; if (dataPtr->realCmdPtr == Tcl_GetHashValue(hPtr)) { /* * Repeated import of same command is acceptable. */ return TCL_OK; } } Tcl_AppendResult(interp, "can't import command \"", cmdName, "\": already exists", NULL); Tcl_SetErrorCode(interp, "TCL", "IMPORT", "OVERWRITE", NULL); return TCL_ERROR; } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_ForgetImport -- * * Deletes commands previously imported into the namespace indicated. * The by namespacePtr, or the current namespace of interp, when * namespacePtr is NULL. The pattern controls which imported commands are * deleted. A simple pattern, one without namespace separators, matches * the current command names of imported commands in the namespace. * Matching imported commands are deleted. A qualified pattern is * interpreted as deletion selection on the basis of where the command is * imported from. The original command and "first link" command for each * imported command are determined, and they are matched against the * pattern. A match leads to deletion of the imported command. * * Results: * Returns TCL_ERROR and records an error message in the interp result if * a namespace qualified pattern refers to a namespace that does not * exist. Otherwise, returns TCL_OK. * * Side effects: * May delete commands. * *---------------------------------------------------------------------- */ int Tcl_ForgetImport( Tcl_Interp *interp, /* Current interpreter. */ Tcl_Namespace *namespacePtr,/* Points to the namespace from which * previously imported commands should be * removed. NULL for current namespace. */ const char *pattern) /* String pattern indicating which imported * commands to remove. */ { Namespace *nsPtr, *sourceNsPtr, *dummyPtr; const char *simplePattern; char *cmdName; register Tcl_HashEntry *hPtr; Tcl_HashSearch search; /* * If the specified namespace is NULL, use the current namespace. */ if (namespacePtr == NULL) { nsPtr = (Namespace *) TclGetCurrentNamespace(interp); } else { nsPtr = (Namespace *) namespacePtr; } /* * Parse the pattern into its namespace-qualification (if any) and the * simple pattern. */ TclGetNamespaceForQualName(interp, pattern, nsPtr, /*flags*/ (TCL_LEAVE_ERR_MSG | TCL_NAMESPACE_ONLY), &sourceNsPtr, &dummyPtr, &dummyPtr, &simplePattern); if (sourceNsPtr == NULL) { Tcl_AppendResult(interp, "unknown namespace in namespace forget pattern \"", pattern, "\"", NULL); Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "NAMESPACE", pattern, NULL); return TCL_ERROR; } if (strcmp(pattern, simplePattern) == 0) { /* * The pattern is simple. Delete any imported commands that match it. */ if (TclMatchIsTrivial(simplePattern)) { hPtr = Tcl_FindHashEntry(&nsPtr->cmdTable, simplePattern); if (hPtr != NULL) { Command *cmdPtr = Tcl_GetHashValue(hPtr); if (cmdPtr && (cmdPtr->deleteProc == DeleteImportedCmd)) { Tcl_DeleteCommandFromToken(interp, (Tcl_Command) cmdPtr); } } return TCL_OK; } for (hPtr = Tcl_FirstHashEntry(&nsPtr->cmdTable, &search); (hPtr != NULL); hPtr = Tcl_NextHashEntry(&search)) { Command *cmdPtr = Tcl_GetHashValue(hPtr); if (cmdPtr->deleteProc != DeleteImportedCmd) { continue; } cmdName = Tcl_GetHashKey(&nsPtr->cmdTable, hPtr); if (Tcl_StringMatch(cmdName, simplePattern)) { Tcl_DeleteCommandFromToken(interp, (Tcl_Command) cmdPtr); } } return TCL_OK; } /* * The pattern was namespace-qualified. */ for (hPtr = Tcl_FirstHashEntry(&nsPtr->cmdTable, &search); (hPtr != NULL); hPtr = Tcl_NextHashEntry(&search)) { Tcl_CmdInfo info; Tcl_Command token = Tcl_GetHashValue(hPtr); Tcl_Command origin = TclGetOriginalCommand(token); if (Tcl_GetCommandInfoFromToken(origin, &info) == 0) { continue; /* Not an imported command. */ } if (info.namespacePtr != (Tcl_Namespace *) sourceNsPtr) { /* * Original not in namespace we're matching. Check the first link * in the import chain. */ Command *cmdPtr = (Command *) token; ImportedCmdData *dataPtr = cmdPtr->objClientData; Tcl_Command firstToken = (Tcl_Command) dataPtr->realCmdPtr; if (firstToken == origin) { continue; } Tcl_GetCommandInfoFromToken(firstToken, &info); if (info.namespacePtr != (Tcl_Namespace *) sourceNsPtr) { continue; } origin = firstToken; } if (Tcl_StringMatch(Tcl_GetCommandName(NULL, origin), simplePattern)){ Tcl_DeleteCommandFromToken(interp, token); } } return TCL_OK; } /* *---------------------------------------------------------------------- * * TclGetOriginalCommand -- * * An imported command is created in an namespace when a "real" command * is imported from another namespace. If the specified command is an * imported command, this function returns the original command it refers * to. * * Results: * If the command was imported into a sequence of namespaces a, b,...,n * where each successive namespace just imports the command from the * previous namespace, this function returns the Tcl_Command token in the * first namespace, a. Otherwise, if the specified command is not an * imported command, the function returns NULL. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Command TclGetOriginalCommand( Tcl_Command command) /* The imported command for which the original * command should be returned. */ { register Command *cmdPtr = (Command *) command; ImportedCmdData *dataPtr; if (cmdPtr->deleteProc != DeleteImportedCmd) { return NULL; } while (cmdPtr->deleteProc == DeleteImportedCmd) { dataPtr = cmdPtr->objClientData; cmdPtr = dataPtr->realCmdPtr; } return (Tcl_Command) cmdPtr; } /* *---------------------------------------------------------------------- * * InvokeImportedCmd -- * * Invoked by Tcl whenever the user calls an imported command that was * created by Tcl_Import. Finds the "real" command (in another * namespace), and passes control to it. * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Returns a result in the interpreter's result object. If anything goes * wrong, the result object is set to an error message. * *---------------------------------------------------------------------- */ static int InvokeImportedNRCmd( ClientData clientData, /* Points to the imported command's * ImportedCmdData structure. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* The argument objects. */ { ImportedCmdData *dataPtr = clientData; Command *realCmdPtr = dataPtr->realCmdPtr; ((Interp *) interp)->evalFlags |= TCL_EVAL_REDIRECT; return Tcl_NRCmdSwap(interp, (Tcl_Command) realCmdPtr, objc, objv, 0); } static int InvokeImportedCmd( ClientData clientData, /* Points to the imported command's * ImportedCmdData structure. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* The argument objects. */ { return Tcl_NRCallObjProc(interp, InvokeImportedNRCmd, clientData, objc, objv); } /* *---------------------------------------------------------------------- * * DeleteImportedCmd -- * * Invoked by Tcl whenever an imported command is deleted. The "real" * command keeps a list of all the imported commands that refer to it, so * those imported commands can be deleted when the real command is * deleted. This function removes the imported command reference from the * real command's list, and frees up the memory associated with the * imported command. * * Results: * None. * * Side effects: * Removes the imported command from the real command's import list. * *---------------------------------------------------------------------- */ static void DeleteImportedCmd( ClientData clientData) /* Points to the imported command's * ImportedCmdData structure. */ { ImportedCmdData *dataPtr = clientData; Command *realCmdPtr = dataPtr->realCmdPtr; Command *selfPtr = dataPtr->selfPtr; register ImportRef *refPtr, *prevPtr; prevPtr = NULL; for (refPtr = realCmdPtr->importRefPtr; refPtr != NULL; refPtr = refPtr->nextPtr) { if (refPtr->importedCmdPtr == selfPtr) { /* * Remove *refPtr from real command's list of imported commands * that refer to it. */ if (prevPtr == NULL) { /* refPtr is first in list. */ realCmdPtr->importRefPtr = refPtr->nextPtr; } else { prevPtr->nextPtr = refPtr->nextPtr; } ckfree(refPtr); ckfree(dataPtr); return; } prevPtr = refPtr; } Tcl_Panic("DeleteImportedCmd: did not find cmd in real cmd's list of import references"); } /* *---------------------------------------------------------------------- * * TclGetNamespaceForQualName -- * * Given a qualified name specifying a command, variable, or namespace, * and a namespace in which to resolve the name, this function returns a * pointer to the namespace that contains the item. A qualified name * consists of the "simple" name of an item qualified by the names of an * arbitrary number of containing namespace separated by "::"s. If the * qualified name starts with "::", it is interpreted absolutely from the * global namespace. Otherwise, it is interpreted relative to the * namespace specified by cxtNsPtr if it is non-NULL. If cxtNsPtr is * NULL, the name is interpreted relative to the current namespace. * * A relative name like "foo::bar::x" can be found starting in either the * current namespace or in the global namespace. So each search usually * follows two tracks, and two possible namespaces are returned. If the * function sets either *nsPtrPtr or *altNsPtrPtr to NULL, then that path * failed. * * If "flags" contains TCL_GLOBAL_ONLY, the relative qualified name is * sought only in the global :: namespace. The alternate search (also) * starting from the global namespace is ignored and *altNsPtrPtr is set * NULL. * * If "flags" contains TCL_NAMESPACE_ONLY, the relative qualified name is * sought only in the namespace specified by cxtNsPtr. The alternate * search starting from the global namespace is ignored and *altNsPtrPtr * is set NULL. If both TCL_GLOBAL_ONLY and TCL_NAMESPACE_ONLY are * specified, TCL_GLOBAL_ONLY is ignored and the search starts from the * namespace specified by cxtNsPtr. * * If "flags" contains TCL_CREATE_NS_IF_UNKNOWN, all namespace components * of the qualified name that cannot be found are automatically created * within their specified parent. This makes sure that functions like * Tcl_CreateCommand always succeed. There is no alternate search path, * so *altNsPtrPtr is set NULL. * * If "flags" contains TCL_FIND_ONLY_NS, the qualified name is treated as * a reference to a namespace, and the entire qualified name is followed. * If the name is relative, the namespace is looked up only in the * current namespace. A pointer to the namespace is stored in *nsPtrPtr * and NULL is stored in *simpleNamePtr. Otherwise, if TCL_FIND_ONLY_NS * is not specified, only the leading components are treated as namespace * names, and a pointer to the simple name of the final component is * stored in *simpleNamePtr. * * Results: * It sets *nsPtrPtr and *altNsPtrPtr to point to the two possible * namespaces which represent the last (containing) namespace in the * qualified name. If the function sets either *nsPtrPtr or *altNsPtrPtr * to NULL, then the search along that path failed. The function also * stores a pointer to the simple name of the final component in * *simpleNamePtr. If the qualified name is "::" or was treated as a * namespace reference (TCL_FIND_ONLY_NS), the function stores a pointer * to the namespace in *nsPtrPtr, NULL in *altNsPtrPtr, and sets * *simpleNamePtr to point to an empty string. * * If there is an error, this function returns TCL_ERROR. If "flags" * contains TCL_LEAVE_ERR_MSG, an error message is returned in the * interpreter's result object. Otherwise, the interpreter's result * object is left unchanged. * * *actualCxtPtrPtr is set to the actual context namespace. It is set to * the input context namespace pointer in cxtNsPtr. If cxtNsPtr is NULL, * it is set to the current namespace context. * * For backwards compatibility with the TclPro byte code loader, this * function always returns TCL_OK. * * Side effects: * If "flags" contains TCL_CREATE_NS_IF_UNKNOWN, new namespaces may be * created. * *---------------------------------------------------------------------- */ int TclGetNamespaceForQualName( Tcl_Interp *interp, /* Interpreter in which to find the namespace * containing qualName. */ const char *qualName, /* A namespace-qualified name of an command, * variable, or namespace. */ Namespace *cxtNsPtr, /* The namespace in which to start the search * for qualName's namespace. If NULL start * from the current namespace. Ignored if * TCL_GLOBAL_ONLY is set. */ int flags, /* Flags controlling the search: an OR'd * combination of TCL_GLOBAL_ONLY, * TCL_NAMESPACE_ONLY, TCL_FIND_ONLY_NS, and * TCL_CREATE_NS_IF_UNKNOWN. */ Namespace **nsPtrPtr, /* Address where function stores a pointer to * containing namespace if qualName is found * starting from *cxtNsPtr or, if * TCL_GLOBAL_ONLY is set, if qualName is * found in the global :: namespace. NULL is * stored otherwise. */ Namespace **altNsPtrPtr, /* Address where function stores a pointer to * containing namespace if qualName is found * starting from the global :: namespace. * NULL is stored if qualName isn't found * starting from :: or if the TCL_GLOBAL_ONLY, * TCL_NAMESPACE_ONLY, TCL_FIND_ONLY_NS, * TCL_CREATE_NS_IF_UNKNOWN flag is set. */ Namespace **actualCxtPtrPtr,/* Address where function stores a pointer to * the actual namespace from which the search * started. This is either cxtNsPtr, the :: * namespace if TCL_GLOBAL_ONLY was specified, * or the current namespace if cxtNsPtr was * NULL. */ const char **simpleNamePtr) /* Address where function stores the simple * name at end of the qualName, or NULL if * qualName is "::" or the flag * TCL_FIND_ONLY_NS was specified. */ { Interp *iPtr = (Interp *) interp; Namespace *nsPtr = cxtNsPtr; Namespace *altNsPtr; Namespace *globalNsPtr = iPtr->globalNsPtr; const char *start, *end; const char *nsName; Tcl_HashEntry *entryPtr; Tcl_DString buffer; int len; /* * Determine the context namespace nsPtr in which to start the primary * search. If the qualName name starts with a "::" or TCL_GLOBAL_ONLY was * specified, search from the global namespace. Otherwise, use the * namespace given in cxtNsPtr, or if that is NULL, use the current * namespace context. Note that we always treat two or more adjacent ":"s * as a namespace separator. */ if (flags & TCL_GLOBAL_ONLY) { nsPtr = globalNsPtr; } else if (nsPtr == NULL) { nsPtr = iPtr->varFramePtr->nsPtr; } start = qualName; /* Points to start of qualifying * namespace. */ if ((*qualName == ':') && (*(qualName+1) == ':')) { start = qualName+2; /* Skip over the initial :: */ while (*start == ':') { start++; /* Skip over a subsequent : */ } nsPtr = globalNsPtr; if (*start == '\0') { /* qualName is just two or more * ":"s. */ *nsPtrPtr = globalNsPtr; *altNsPtrPtr = NULL; *actualCxtPtrPtr = globalNsPtr; *simpleNamePtr = start; /* Points to empty string. */ return TCL_OK; } } *actualCxtPtrPtr = nsPtr; /* * Start an alternate search path starting with the global namespace. * However, if the starting context is the global namespace, or if the * flag is set to search only the namespace *cxtNsPtr, ignore the * alternate search path. */ altNsPtr = globalNsPtr; if ((nsPtr == globalNsPtr) || (flags & (TCL_NAMESPACE_ONLY | TCL_FIND_ONLY_NS))) { altNsPtr = NULL; } /* * Loop to resolve each namespace qualifier in qualName. */ Tcl_DStringInit(&buffer); end = start; while (*start != '\0') { /* * Find the next namespace qualifier (i.e., a name ending in "::") or * the end of the qualified name (i.e., a name ending in "\0"). Set * len to the number of characters, starting from start, in the name; * set end to point after the "::"s or at the "\0". */ len = 0; for (end = start; *end != '\0'; end++) { if ((*end == ':') && (*(end+1) == ':')) { end += 2; /* Skip over the initial :: */ while (*end == ':') { end++; /* Skip over the subsequent : */ } break; /* Exit for loop; end is after ::'s */ } len++; } if (*end=='\0' && !(end-start>=2 && *(end-1)==':' && *(end-2)==':')) { /* * qualName ended with a simple name at start. If TCL_FIND_ONLY_NS * was specified, look this up as a namespace. Otherwise, start is * the name of a cmd or var and we are done. */ if (flags & TCL_FIND_ONLY_NS) { nsName = start; } else { *nsPtrPtr = nsPtr; *altNsPtrPtr = altNsPtr; *simpleNamePtr = start; Tcl_DStringFree(&buffer); return TCL_OK; } } else { /* * start points to the beginning of a namespace qualifier ending * in "::". end points to the start of a name in that namespace * that might be empty. Copy the namespace qualifier to a buffer * so it can be null terminated. We can't modify the incoming * qualName since it may be a string constant. */ Tcl_DStringSetLength(&buffer, 0); Tcl_DStringAppend(&buffer, start, len); nsName = Tcl_DStringValue(&buffer); } /* * Look up the namespace qualifier nsName in the current namespace * context. If it isn't found but TCL_CREATE_NS_IF_UNKNOWN is set, * create that qualifying namespace. This is needed for functions like * Tcl_CreateCommand that cannot fail. */ if (nsPtr != NULL) { #ifndef BREAK_NAMESPACE_COMPAT entryPtr = Tcl_FindHashEntry(&nsPtr->childTable, nsName); #else if (nsPtr->childTablePtr == NULL) { entryPtr = NULL; } else { entryPtr = Tcl_FindHashEntry(nsPtr->childTablePtr, nsName); } #endif if (entryPtr != NULL) { nsPtr = Tcl_GetHashValue(entryPtr); } else if (flags & TCL_CREATE_NS_IF_UNKNOWN) { Tcl_CallFrame *framePtr; (void) TclPushStackFrame(interp, &framePtr, (Tcl_Namespace *) nsPtr, /*isProcCallFrame*/ 0); nsPtr = (Namespace *) Tcl_CreateNamespace(interp, nsName, NULL, NULL); TclPopStackFrame(interp); if (nsPtr == NULL) { Tcl_Panic("Could not create namespace '%s'", nsName); } } else { /* Namespace not found and was not * created. */ nsPtr = NULL; } } /* * Look up the namespace qualifier in the alternate search path too. */ if (altNsPtr != NULL) { #ifndef BREAK_NAMESPACE_COMPAT entryPtr = Tcl_FindHashEntry(&altNsPtr->childTable, nsName); #else if (altNsPtr->childTablePtr != NULL) { entryPtr = Tcl_FindHashEntry(altNsPtr->childTablePtr, nsName); } else { entryPtr = NULL; } #endif if (entryPtr != NULL) { altNsPtr = Tcl_GetHashValue(entryPtr); } else { altNsPtr = NULL; } } /* * If both search paths have failed, return NULL results. */ if ((nsPtr == NULL) && (altNsPtr == NULL)) { *nsPtrPtr = NULL; *altNsPtrPtr = NULL; *simpleNamePtr = NULL; Tcl_DStringFree(&buffer); return TCL_OK; } start = end; } /* * We ignore trailing "::"s in a namespace name, but in a command or * variable name, trailing "::"s refer to the cmd or var named {}. */ if ((flags & TCL_FIND_ONLY_NS) || (end>start && *(end-1)!=':')) { *simpleNamePtr = NULL; /* Found namespace name. */ } else { *simpleNamePtr = end; /* Found cmd/var: points to empty * string. */ } /* * As a special case, if we are looking for a namespace and qualName is "" * and the current active namespace (nsPtr) is not the global namespace, * return NULL (no namespace was found). This is because namespaces can * not have empty names except for the global namespace. */ if ((flags & TCL_FIND_ONLY_NS) && (*qualName == '\0') && (nsPtr != globalNsPtr)) { nsPtr = NULL; } *nsPtrPtr = nsPtr; *altNsPtrPtr = altNsPtr; Tcl_DStringFree(&buffer); return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_FindNamespace -- * * Searches for a namespace. * * Results: * Returns a pointer to the namespace if it is found. Otherwise, returns * NULL and leaves an error message in the interpreter's result object if * "flags" contains TCL_LEAVE_ERR_MSG. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Namespace * Tcl_FindNamespace( Tcl_Interp *interp, /* The interpreter in which to find the * namespace. */ const char *name, /* Namespace name. If it starts with "::", * will be looked up in global namespace. * Else, looked up first in contextNsPtr * (current namespace if contextNsPtr is * NULL), then in global namespace. */ Tcl_Namespace *contextNsPtr,/* Ignored if TCL_GLOBAL_ONLY flag is set or * if the name starts with "::". Otherwise, * points to namespace in which to resolve * name; if NULL, look up name in the current * namespace. */ register int flags) /* Flags controlling namespace lookup: an OR'd * combination of TCL_GLOBAL_ONLY and * TCL_LEAVE_ERR_MSG flags. */ { Namespace *nsPtr, *dummy1Ptr, *dummy2Ptr; const char *dummy; /* * Find the namespace(s) that contain the specified namespace name. Add * the TCL_FIND_ONLY_NS flag to resolve the name all the way down to its * last component, a namespace. */ TclGetNamespaceForQualName(interp, name, (Namespace *) contextNsPtr, flags|TCL_FIND_ONLY_NS, &nsPtr, &dummy1Ptr, &dummy2Ptr, &dummy); if (nsPtr != NULL) { return (Tcl_Namespace *) nsPtr; } if (flags & TCL_LEAVE_ERR_MSG) { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "unknown namespace \"", name, "\"", NULL); Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "NAMESPACE", name, NULL); } return NULL; } /* *---------------------------------------------------------------------- * * Tcl_FindCommand -- * * Searches for a command. * * Results: * Returns a token for the command if it is found. Otherwise, if it can't * be found or there is an error, returns NULL and leaves an error * message in the interpreter's result object if "flags" contains * TCL_LEAVE_ERR_MSG. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Command Tcl_FindCommand( Tcl_Interp *interp, /* The interpreter in which to find the * command and to report errors. */ const char *name, /* Command's name. If it starts with "::", * will be looked up in global namespace. * Else, looked up first in contextNsPtr * (current namespace if contextNsPtr is * NULL), then in global namespace. */ Tcl_Namespace *contextNsPtr,/* Ignored if TCL_GLOBAL_ONLY flag set. * Otherwise, points to namespace in which to * resolve name. If NULL, look up name in the * current namespace. */ int flags) /* An OR'd combination of flags: * TCL_GLOBAL_ONLY (look up name only in * global namespace), TCL_NAMESPACE_ONLY (look * up only in contextNsPtr, or the current * namespace if contextNsPtr is NULL), and * TCL_LEAVE_ERR_MSG. If both TCL_GLOBAL_ONLY * and TCL_NAMESPACE_ONLY are given, * TCL_GLOBAL_ONLY is ignored. */ { Interp *iPtr = (Interp *) interp; Namespace *cxtNsPtr; register Tcl_HashEntry *entryPtr; register Command *cmdPtr; const char *simpleName; int result; /* * If this namespace has a command resolver, then give it first crack at * the command resolution. If the interpreter has any command resolvers, * consult them next. The command resolver functions may return a * Tcl_Command value, they may signal to continue onward, or they may * signal an error. */ if ((flags & TCL_GLOBAL_ONLY) || !strncmp(name, "::", 2)) { cxtNsPtr = (Namespace *) TclGetGlobalNamespace(interp); } else if (contextNsPtr != NULL) { cxtNsPtr = (Namespace *) contextNsPtr; } else { cxtNsPtr = (Namespace *) TclGetCurrentNamespace(interp); } if (cxtNsPtr->cmdResProc != NULL || iPtr->resolverPtr != NULL) { ResolverScheme *resPtr = iPtr->resolverPtr; Tcl_Command cmd; if (cxtNsPtr->cmdResProc) { result = cxtNsPtr->cmdResProc(interp, name, (Tcl_Namespace *) cxtNsPtr, flags, &cmd); } else { result = TCL_CONTINUE; } while (result == TCL_CONTINUE && resPtr) { if (resPtr->cmdResProc) { result = resPtr->cmdResProc(interp, name, (Tcl_Namespace *) cxtNsPtr, flags, &cmd); } resPtr = resPtr->nextPtr; } if (result == TCL_OK) { return cmd; } else if (result != TCL_CONTINUE) { return NULL; } } /* * Find the namespace(s) that contain the command. */ cmdPtr = NULL; if (cxtNsPtr->commandPathLength!=0 && strncmp(name, "::", 2) && !(flags & TCL_NAMESPACE_ONLY)) { int i; Namespace *pathNsPtr, *realNsPtr, *dummyNsPtr; (void) TclGetNamespaceForQualName(interp, name, cxtNsPtr, TCL_NAMESPACE_ONLY, &realNsPtr, &dummyNsPtr, &dummyNsPtr, &simpleName); if ((realNsPtr != NULL) && (simpleName != NULL)) { if ((cxtNsPtr == realNsPtr) || !(realNsPtr->flags & NS_DYING)) { entryPtr = Tcl_FindHashEntry(&realNsPtr->cmdTable, simpleName); if (entryPtr != NULL) { cmdPtr = Tcl_GetHashValue(entryPtr); } } } /* * Next, check along the path. */ for (i=0 ; icommandPathLength && cmdPtr==NULL ; i++) { pathNsPtr = cxtNsPtr->commandPathArray[i].nsPtr; if (pathNsPtr == NULL) { continue; } (void) TclGetNamespaceForQualName(interp, name, pathNsPtr, TCL_NAMESPACE_ONLY, &realNsPtr, &dummyNsPtr, &dummyNsPtr, &simpleName); if ((realNsPtr != NULL) && (simpleName != NULL) && !(realNsPtr->flags & NS_DYING)) { entryPtr = Tcl_FindHashEntry(&realNsPtr->cmdTable, simpleName); if (entryPtr != NULL) { cmdPtr = Tcl_GetHashValue(entryPtr); } } } /* * If we've still not found the command, look in the global namespace * as a last resort. */ if (cmdPtr == NULL) { (void) TclGetNamespaceForQualName(interp, name, NULL, TCL_GLOBAL_ONLY, &realNsPtr, &dummyNsPtr, &dummyNsPtr, &simpleName); if ((realNsPtr != NULL) && (simpleName != NULL) && !(realNsPtr->flags & NS_DYING)) { entryPtr = Tcl_FindHashEntry(&realNsPtr->cmdTable, simpleName); if (entryPtr != NULL) { cmdPtr = Tcl_GetHashValue(entryPtr); } } } } else { Namespace *nsPtr[2]; register int search; TclGetNamespaceForQualName(interp, name, (Namespace *) contextNsPtr, flags, &nsPtr[0], &nsPtr[1], &cxtNsPtr, &simpleName); /* * Look for the command in the command table of its namespace. Be sure * to check both possible search paths: from the specified namespace * context and from the global namespace. */ for (search = 0; (search < 2) && (cmdPtr == NULL); search++) { if ((nsPtr[search] != NULL) && (simpleName != NULL)) { entryPtr = Tcl_FindHashEntry(&nsPtr[search]->cmdTable, simpleName); if (entryPtr != NULL) { cmdPtr = Tcl_GetHashValue(entryPtr); } } } } if (cmdPtr != NULL) { return (Tcl_Command) cmdPtr; } if (flags & TCL_LEAVE_ERR_MSG) { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "unknown command \"", name, "\"", NULL); Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "COMMAND", name, NULL); } return NULL; } /* *---------------------------------------------------------------------- * * TclResetShadowedCmdRefs -- * * Called when a command is added to a namespace to check for existing * command references that the new command may invalidate. Consider the * following cases that could happen when you add a command "foo" to a * namespace "b": * 1. It could shadow a command named "foo" at the global scope. If * it does, all command references in the namespace "b" are * suspect. * 2. Suppose the namespace "b" resides in a namespace "a". Then to * "a" the new command "b::foo" could shadow another command * "b::foo" in the global namespace. If so, then all command * references in "a" * are suspect. * The same checks are applied to all parent namespaces, until we reach * the global :: namespace. * * Results: * None. * * Side effects: * If the new command shadows an existing command, the cmdRefEpoch * counter is incremented in each namespace that sees the shadow. This * invalidates all command references that were previously cached in that * namespace. The next time the commands are used, they are resolved from * scratch. * *---------------------------------------------------------------------- */ void TclResetShadowedCmdRefs( Tcl_Interp *interp, /* Interpreter containing the new command. */ Command *newCmdPtr) /* Points to the new command. */ { char *cmdName; Tcl_HashEntry *hPtr; register Namespace *nsPtr; Namespace *trailNsPtr, *shadowNsPtr; Namespace *globalNsPtr = (Namespace *) TclGetGlobalNamespace(interp); int found, i; int trailFront = -1; int trailSize = 5; /* Formerly NUM_TRAIL_ELEMS. */ Namespace **trailPtr = TclStackAlloc(interp, trailSize * sizeof(Namespace *)); /* * Start at the namespace containing the new command, and work up through * the list of parents. Stop just before the global namespace, since the * global namespace can't "shadow" its own entries. * * The namespace "trail" list we build consists of the names of each * namespace that encloses the new command, in order from outermost to * innermost: for example, "a" then "b". Each iteration of this loop * eventually extends the trail upwards by one namespace, nsPtr. We use * this trail list to see if nsPtr (e.g. "a" in 2. above) could have * now-invalid cached command references. This will happen if nsPtr * (e.g. "a") contains a sequence of child namespaces (e.g. "b") such that * there is a identically-named sequence of child namespaces starting from * :: (e.g. "::b") whose tail namespace contains a command also named * cmdName. */ cmdName = Tcl_GetHashKey(newCmdPtr->hPtr->tablePtr, newCmdPtr->hPtr); for (nsPtr=newCmdPtr->nsPtr ; (nsPtr!=NULL) && (nsPtr!=globalNsPtr) ; nsPtr=nsPtr->parentPtr) { /* * Find the maximal sequence of child namespaces contained in nsPtr * such that there is a identically-named sequence of child namespaces * starting from ::. shadowNsPtr will be the tail of this sequence, or * the deepest namespace under :: that might contain a command now * shadowed by cmdName. We check below if shadowNsPtr actually * contains a command cmdName. */ found = 1; shadowNsPtr = globalNsPtr; for (i = trailFront; i >= 0; i--) { trailNsPtr = trailPtr[i]; #ifndef BREAK_NAMESPACE_COMPAT hPtr = Tcl_FindHashEntry(&shadowNsPtr->childTable, trailNsPtr->name); #else if (shadowNsPtr->childTablePtr != NULL) { hPtr = Tcl_FindHashEntry(shadowNsPtr->childTablePtr, trailNsPtr->name); } else { hPtr = NULL; } #endif if (hPtr != NULL) { shadowNsPtr = Tcl_GetHashValue(hPtr); } else { found = 0; break; } } /* * If shadowNsPtr contains a command named cmdName, we invalidate all * of the command refs cached in nsPtr. As a boundary case, * shadowNsPtr is initially :: and we check for case 1. above. */ if (found) { hPtr = Tcl_FindHashEntry(&shadowNsPtr->cmdTable, cmdName); if (hPtr != NULL) { nsPtr->cmdRefEpoch++; TclInvalidateNsPath(nsPtr); /* * If the shadowed command was compiled to bytecodes, we * invalidate all the bytecodes in nsPtr, to force a new * compilation. We use the resolverEpoch to signal the need * for a fresh compilation of every bytecode. */ if (((Command *)Tcl_GetHashValue(hPtr))->compileProc != NULL){ nsPtr->resolverEpoch++; } } } /* * Insert nsPtr at the front of the trail list: i.e., at the end of * the trailPtr array. */ trailFront++; if (trailFront == trailSize) { int newSize = 2 * trailSize; trailPtr = TclStackRealloc(interp, trailPtr, newSize * sizeof(Namespace *)); trailSize = newSize; } trailPtr[trailFront] = nsPtr; } TclStackFree(interp, trailPtr); } /* *---------------------------------------------------------------------- * * TclGetNamespaceFromObj, GetNamespaceFromObj -- * * Gets the namespace specified by the name in a Tcl_Obj. * * Results: * Returns TCL_OK if the namespace was resolved successfully, and stores * a pointer to the namespace in the location specified by nsPtrPtr. If * the namespace can't be found, or anything else goes wrong, this * function returns TCL_ERROR and writes an error message to interp, * if non-NULL. * * Side effects: * May update the internal representation for the object, caching the * namespace reference. The next time this function is called, the * namespace value can be found quickly. * *---------------------------------------------------------------------- */ int TclGetNamespaceFromObj( Tcl_Interp *interp, /* The current interpreter. */ Tcl_Obj *objPtr, /* The object to be resolved as the name of a * namespace. */ Tcl_Namespace **nsPtrPtr) /* Result namespace pointer goes here. */ { if (GetNamespaceFromObj(interp, objPtr, nsPtrPtr) == TCL_ERROR) { const char *name = TclGetString(objPtr); if ((name[0] == ':') && (name[1] == ':')) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "namespace \"%s\" not found", name)); } else { /* * Get the current namespace name. */ NamespaceCurrentCmd(NULL, interp, 1, NULL); Tcl_SetObjResult(interp, Tcl_ObjPrintf( "namespace \"%s\" not found in \"%s\"", name, Tcl_GetStringResult(interp))); } Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "NAMESPACE", name, NULL); return TCL_ERROR; } return TCL_OK; } static int GetNamespaceFromObj( Tcl_Interp *interp, /* The current interpreter. */ Tcl_Obj *objPtr, /* The object to be resolved as the name of a * namespace. */ Tcl_Namespace **nsPtrPtr) /* Result namespace pointer goes here. */ { ResolvedNsName *resNamePtr; Namespace *nsPtr, *refNsPtr; if (objPtr->typePtr == &nsNameType) { /* * Check that the ResolvedNsName is still valid; avoid letting the ref * cross interps. */ resNamePtr = objPtr->internalRep.twoPtrValue.ptr1; nsPtr = resNamePtr->nsPtr; refNsPtr = resNamePtr->refNsPtr; if (!(nsPtr->flags & NS_DYING) && (interp == nsPtr->interp) && (!refNsPtr || ((interp == refNsPtr->interp) && (refNsPtr== (Namespace *) Tcl_GetCurrentNamespace(interp))))){ *nsPtrPtr = (Tcl_Namespace *) nsPtr; return TCL_OK; } } if (SetNsNameFromAny(interp, objPtr) == TCL_OK) { resNamePtr = objPtr->internalRep.twoPtrValue.ptr1; *nsPtrPtr = (Tcl_Namespace *) resNamePtr->nsPtr; return TCL_OK; } return TCL_ERROR; } /* *---------------------------------------------------------------------- * * TclInitNamespaceCmd -- * * This function is called to create the "namespace" Tcl command. See the * user documentation for details on what it does. * * Results: * Handle for the namespace command, or NULL on failure. * * Side effects: * none * *---------------------------------------------------------------------- */ Tcl_Command TclInitNamespaceCmd( Tcl_Interp *interp) /* Current interpreter. */ { return TclMakeEnsemble(interp, "namespace", defaultNamespaceMap); } /* *---------------------------------------------------------------------- * * NamespaceChildrenCmd -- * * Invoked to implement the "namespace children" command that returns a * list containing the fully-qualified names of the child namespaces of a * given namespace. Handles the following syntax: * * namespace children ?name? ?pattern? * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Returns a result in the interpreter's result object. If anything goes * wrong, the result is an error message. * *---------------------------------------------------------------------- */ static int NamespaceChildrenCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tcl_Namespace *namespacePtr; Namespace *nsPtr, *childNsPtr; Namespace *globalNsPtr = (Namespace *) TclGetGlobalNamespace(interp); const char *pattern = NULL; Tcl_DString buffer; register Tcl_HashEntry *entryPtr; Tcl_HashSearch search; Tcl_Obj *listPtr, *elemPtr; /* * Get a pointer to the specified namespace, or the current namespace. */ if (objc == 1) { nsPtr = (Namespace *) TclGetCurrentNamespace(interp); } else if ((objc == 2) || (objc == 3)) { if (TclGetNamespaceFromObj(interp, objv[1], &namespacePtr) != TCL_OK){ return TCL_ERROR; } nsPtr = (Namespace *) namespacePtr; } else { Tcl_WrongNumArgs(interp, 1, objv, "?name? ?pattern?"); return TCL_ERROR; } /* * Get the glob-style pattern, if any, used to narrow the search. */ Tcl_DStringInit(&buffer); if (objc == 3) { const char *name = TclGetString(objv[2]); if ((*name == ':') && (*(name+1) == ':')) { pattern = name; } else { Tcl_DStringAppend(&buffer, nsPtr->fullName, -1); if (nsPtr != globalNsPtr) { Tcl_DStringAppend(&buffer, "::", 2); } Tcl_DStringAppend(&buffer, name, -1); pattern = Tcl_DStringValue(&buffer); } } /* * Create a list containing the full names of all child namespaces whose * names match the specified pattern, if any. */ listPtr = Tcl_NewListObj(0, NULL); if ((pattern != NULL) && TclMatchIsTrivial(pattern)) { unsigned int length = strlen(nsPtr->fullName); if (strncmp(pattern, nsPtr->fullName, length) != 0) { goto searchDone; } if ( #ifndef BREAK_NAMESPACE_COMPAT Tcl_FindHashEntry(&nsPtr->childTable, pattern+length) != NULL #else nsPtr->childTablePtr != NULL && Tcl_FindHashEntry(nsPtr->childTablePtr, pattern+length) != NULL #endif ) { Tcl_ListObjAppendElement(interp, listPtr, Tcl_NewStringObj(pattern, -1)); } goto searchDone; } #ifndef BREAK_NAMESPACE_COMPAT entryPtr = Tcl_FirstHashEntry(&nsPtr->childTable, &search); #else if (nsPtr->childTablePtr == NULL) { goto searchDone; } entryPtr = Tcl_FirstHashEntry(nsPtr->childTablePtr, &search); #endif while (entryPtr != NULL) { childNsPtr = Tcl_GetHashValue(entryPtr); if ((pattern == NULL) || Tcl_StringMatch(childNsPtr->fullName, pattern)) { elemPtr = Tcl_NewStringObj(childNsPtr->fullName, -1); Tcl_ListObjAppendElement(interp, listPtr, elemPtr); } entryPtr = Tcl_NextHashEntry(&search); } searchDone: Tcl_SetObjResult(interp, listPtr); Tcl_DStringFree(&buffer); return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceCodeCmd -- * * Invoked to implement the "namespace code" command to capture the * namespace context of a command. Handles the following syntax: * * namespace code arg * * Here "arg" can be a list. "namespace code arg" produces a result * equivalent to that produced by the command * * list ::namespace inscope [namespace current] $arg * * However, if "arg" is itself a scoped value starting with "::namespace * inscope", then the result is just "arg". * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * If anything goes wrong, this function returns an error message as the * result in the interpreter's result object. * *---------------------------------------------------------------------- */ static int NamespaceCodeCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Namespace *currNsPtr; Tcl_Obj *listPtr, *objPtr; register const char *arg; int length; if (objc != 2) { Tcl_WrongNumArgs(interp, 1, objv, "arg"); return TCL_ERROR; } /* * If "arg" is already a scoped value, then return it directly. * Take care to only check for scoping in precisely the style that * [::namespace code] generates it. Anything more forgiving can have * the effect of failing in namespaces that contain their own custom " "namespace" command. [Bug 3202171]. */ arg = TclGetStringFromObj(objv[1], &length); if (*arg==':' && length > 20 && strncmp(arg, "::namespace inscope ", 20) == 0) { Tcl_SetObjResult(interp, objv[1]); return TCL_OK; } /* * Otherwise, construct a scoped command by building a list with * "namespace inscope", the full name of the current namespace, and the * argument "arg". By constructing a list, we ensure that scoped commands * are interpreted properly when they are executed later, by the * "namespace inscope" command. */ TclNewObj(listPtr); TclNewLiteralStringObj(objPtr, "::namespace"); Tcl_ListObjAppendElement(interp, listPtr, objPtr); TclNewLiteralStringObj(objPtr, "inscope"); Tcl_ListObjAppendElement(interp, listPtr, objPtr); currNsPtr = (Namespace *) TclGetCurrentNamespace(interp); if (currNsPtr == (Namespace *) TclGetGlobalNamespace(interp)) { TclNewLiteralStringObj(objPtr, "::"); } else { objPtr = Tcl_NewStringObj(currNsPtr->fullName, -1); } Tcl_ListObjAppendElement(interp, listPtr, objPtr); Tcl_ListObjAppendElement(interp, listPtr, objv[1]); Tcl_SetObjResult(interp, listPtr); return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceCurrentCmd -- * * Invoked to implement the "namespace current" command which returns the * fully-qualified name of the current namespace. Handles the following * syntax: * * namespace current * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Returns a result in the interpreter's result object. If anything goes * wrong, the result is an error message. * *---------------------------------------------------------------------- */ static int NamespaceCurrentCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { register Namespace *currNsPtr; if (objc != 1) { Tcl_WrongNumArgs(interp, 1, objv, NULL); return TCL_ERROR; } /* * The "real" name of the global namespace ("::") is the null string, but * we return "::" for it as a convenience to programmers. Note that "" and * "::" are treated as synonyms by the namespace code so that it is still * easy to do things like: * * namespace [namespace current]::bar { ... } */ currNsPtr = (Namespace *) TclGetCurrentNamespace(interp); if (currNsPtr == (Namespace *) TclGetGlobalNamespace(interp)) { Tcl_SetObjResult(interp, Tcl_NewStringObj("::", 2)); } else { Tcl_SetObjResult(interp, Tcl_NewStringObj(currNsPtr->fullName, -1)); } return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceDeleteCmd -- * * Invoked to implement the "namespace delete" command to delete * namespace(s). Handles the following syntax: * * namespace delete ?name name...? * * Each name identifies a namespace. It may include a sequence of * namespace qualifiers separated by "::"s. If a namespace is found, it * is deleted: all variables and procedures contained in that namespace * are deleted. If that namespace is being used on the call stack, it is * kept alive (but logically deleted) until it is removed from the call * stack: that is, it can no longer be referenced by name but any * currently executing procedure that refers to it is allowed to do so * until the procedure returns. If the namespace can't be found, this * function returns an error. If no namespaces are specified, this * command does nothing. * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Deletes the specified namespaces. If anything goes wrong, this * function returns an error message in the interpreter's result object. * *---------------------------------------------------------------------- */ static int NamespaceDeleteCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tcl_Namespace *namespacePtr; const char *name; register int i; if (objc < 1) { Tcl_WrongNumArgs(interp, 1, objv, "?name name...?"); return TCL_ERROR; } /* * Destroying one namespace may cause another to be destroyed. Break this * into two passes: first check to make sure that all namespaces on the * command line are valid, and report any errors. */ for (i = 1; i < objc; i++) { name = TclGetString(objv[i]); namespacePtr = Tcl_FindNamespace(interp, name, NULL, /*flags*/ 0); if ((namespacePtr == NULL) || (((Namespace *) namespacePtr)->flags & NS_KILLED)) { Tcl_AppendResult(interp, "unknown namespace \"", TclGetString(objv[i]), "\" in namespace delete command", NULL); Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "NAMESPACE", TclGetString(objv[i]), NULL); return TCL_ERROR; } } /* * Okay, now delete each namespace. */ for (i = 1; i < objc; i++) { name = TclGetString(objv[i]); namespacePtr = Tcl_FindNamespace(interp, name, NULL, /* flags */ 0); if (namespacePtr) { Tcl_DeleteNamespace(namespacePtr); } } return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceEvalCmd -- * * Invoked to implement the "namespace eval" command. Executes commands * in a namespace. If the namespace does not already exist, it is * created. Handles the following syntax: * * namespace eval name arg ?arg...? * * If more than one arg argument is specified, the command that is * executed is the result of concatenating the arguments together with a * space between each argument. * * Results: * Returns TCL_OK if the namespace is found and the commands are executed * successfully. Returns TCL_ERROR if anything goes wrong. * * Side effects: * Returns the result of the command in the interpreter's result object. * If anything goes wrong, this function returns an error message as the * result. * *---------------------------------------------------------------------- */ static int NamespaceEvalCmd( ClientData clientData, /* Arbitrary value passed to cmd. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { return Tcl_NRCallObjProc(interp, NRNamespaceEvalCmd, clientData, objc, objv); } static int NRNamespaceEvalCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Interp *iPtr = (Interp *) interp; CmdFrame *invoker; int word; Tcl_Namespace *namespacePtr; CallFrame *framePtr, **framePtrPtr; Tcl_Obj *objPtr; int result; if (objc < 3) { Tcl_WrongNumArgs(interp, 1, objv, "name arg ?arg...?"); return TCL_ERROR; } /* * Try to resolve the namespace reference, caching the result in the * namespace object along the way. */ result = GetNamespaceFromObj(interp, objv[1], &namespacePtr); /* * If the namespace wasn't found, try to create it. */ if (result == TCL_ERROR) { const char *name = TclGetString(objv[1]); namespacePtr = Tcl_CreateNamespace(interp, name, NULL, NULL); if (namespacePtr == NULL) { return TCL_ERROR; } } /* * Make the specified namespace the current namespace and evaluate the * command(s). */ /* This is needed to satisfy GCC 3.3's strict aliasing rules */ framePtrPtr = &framePtr; result = TclPushStackFrame(interp, (Tcl_CallFrame **) framePtrPtr, namespacePtr, /*isProcCallFrame*/ 0); if (result != TCL_OK) { return TCL_ERROR; } if (iPtr->ensembleRewrite.sourceObjs == NULL) { framePtr->objc = objc; framePtr->objv = objv; } else { framePtr->objc = objc + iPtr->ensembleRewrite.numRemovedObjs - iPtr->ensembleRewrite.numInsertedObjs; framePtr->objv = iPtr->ensembleRewrite.sourceObjs; } if (objc == 3) { /* * TIP #280: Make actual argument location available to eval'd script. */ objPtr = objv[2]; invoker = iPtr->cmdFramePtr; word = 3; TclArgumentGet(interp, objPtr, &invoker, &word); } else { /* * More than one argument: concatenate them together with spaces * between, then evaluate the result. Tcl_EvalObjEx will delete the * object when it decrements its refcount after eval'ing it. */ objPtr = Tcl_ConcatObj(objc-2, objv+2); invoker = NULL; word = 0; } /* * TIP #280: Make invoking context available to eval'd script. */ TclNRAddCallback(interp, NsEval_Callback, namespacePtr, "eval", NULL, NULL); return TclNREvalObjEx(interp, objPtr, 0, invoker, word); } static int NsEval_Callback( ClientData data[], Tcl_Interp *interp, int result) { Tcl_Namespace *namespacePtr = data[0]; if (result == TCL_ERROR) { int length = strlen(namespacePtr->fullName); int limit = 200; int overflow = (length > limit); char *cmd = data[1]; Tcl_AppendObjToErrorInfo(interp, Tcl_ObjPrintf( "\n (in namespace %s \"%.*s%s\" script line %d)", cmd, (overflow ? limit : length), namespacePtr->fullName, (overflow ? "..." : ""), Tcl_GetErrorLine(interp))); } /* * Restore the previous "current" namespace. */ TclPopStackFrame(interp); return result; } /* *---------------------------------------------------------------------- * * NamespaceExistsCmd -- * * Invoked to implement the "namespace exists" command that returns true * if the given namespace currently exists, and false otherwise. Handles * the following syntax: * * namespace exists name * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Returns a result in the interpreter's result object. If anything goes * wrong, the result is an error message. * *---------------------------------------------------------------------- */ static int NamespaceExistsCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tcl_Namespace *namespacePtr; if (objc != 2) { Tcl_WrongNumArgs(interp, 1, objv, "name"); return TCL_ERROR; } Tcl_SetObjResult(interp, Tcl_NewBooleanObj( GetNamespaceFromObj(interp, objv[1], &namespacePtr) == TCL_OK)); return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceExportCmd -- * * Invoked to implement the "namespace export" command that specifies * which commands are exported from a namespace. The exported commands * are those that can be imported into another namespace using "namespace * import". Both commands defined in a namespace and commands the * namespace has imported can be exported by a namespace. This command * has the following syntax: * * namespace export ?-clear? ?pattern pattern...? * * Each pattern may contain "string match"-style pattern matching special * characters, but the pattern may not include any namespace qualifiers: * that is, the pattern must specify commands in the current (exporting) * namespace. The specified patterns are appended onto the namespace's * list of export patterns. * * To reset the namespace's export pattern list, specify the "-clear" * flag. * * If there are no export patterns and the "-clear" flag isn't given, * this command returns the namespace's current export list. * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Returns a result in the interpreter's result object. If anything goes * wrong, the result is an error message. * *---------------------------------------------------------------------- */ static int NamespaceExportCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Namespace *currNsPtr = (Namespace *) TclGetCurrentNamespace(interp); const char *pattern, *string; int resetListFirst = 0; int firstArg, patternCt, i, result; if (objc < 1) { Tcl_WrongNumArgs(interp, 1, objv, "?-clear? ?pattern pattern...?"); return TCL_ERROR; } /* * Process the optional "-clear" argument. */ firstArg = 1; if (firstArg < objc) { string = TclGetString(objv[firstArg]); if (strcmp(string, "-clear") == 0) { resetListFirst = 1; firstArg++; } } /* * If no pattern arguments are given, and "-clear" isn't specified, return * the namespace's current export pattern list. */ patternCt = objc - firstArg; if (patternCt == 0) { if (firstArg > 1) { return TCL_OK; } else { /* * Create list with export patterns. */ Tcl_Obj *listPtr = Tcl_NewListObj(0, NULL); result = Tcl_AppendExportList(interp, (Tcl_Namespace *) currNsPtr, listPtr); if (result != TCL_OK) { return result; } Tcl_SetObjResult(interp, listPtr); return TCL_OK; } } /* * Add each pattern to the namespace's export pattern list. */ for (i = firstArg; i < objc; i++) { pattern = TclGetString(objv[i]); result = Tcl_Export(interp, (Tcl_Namespace *) currNsPtr, pattern, ((i == firstArg)? resetListFirst : 0)); if (result != TCL_OK) { return result; } } return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceForgetCmd -- * * Invoked to implement the "namespace forget" command to remove imported * commands from a namespace. Handles the following syntax: * * namespace forget ?pattern pattern...? * * Each pattern is a name like "foo::*" or "a::b::x*". That is, the * pattern may include the special pattern matching characters recognized * by the "string match" command, but only in the command name at the end * of the qualified name; the special pattern characters may not appear * in a namespace name. All of the commands that match that pattern are * checked to see if they have an imported command in the current * namespace that refers to the matched command. If there is an alias, it * is removed. * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Imported commands are removed from the current namespace. If anything * goes wrong, this function returns an error message in the * interpreter's result object. * *---------------------------------------------------------------------- */ static int NamespaceForgetCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { const char *pattern; register int i, result; if (objc < 1) { Tcl_WrongNumArgs(interp, 1, objv, "?pattern pattern...?"); return TCL_ERROR; } for (i = 1; i < objc; i++) { pattern = TclGetString(objv[i]); result = Tcl_ForgetImport(interp, NULL, pattern); if (result != TCL_OK) { return result; } } return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceImportCmd -- * * Invoked to implement the "namespace import" command that imports * commands into a namespace. Handles the following syntax: * * namespace import ?-force? ?pattern pattern...? * * Each pattern is a namespace-qualified name like "foo::*", "a::b::x*", * or "bar::p". That is, the pattern may include the special pattern * matching characters recognized by the "string match" command, but only * in the command name at the end of the qualified name; the special * pattern characters may not appear in a namespace name. All of the * commands that match the pattern and which are exported from their * namespace are made accessible from the current namespace context. This * is done by creating a new "imported command" in the current namespace * that points to the real command in its original namespace; when the * imported command is called, it invokes the real command. * * If an imported command conflicts with an existing command, it is * treated as an error. But if the "-force" option is included, then * existing commands are overwritten by the imported commands. * * If there are no pattern arguments and the "-force" flag isn't given, * this command returns the list of commands currently imported in * the current namespace. * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Adds imported commands to the current namespace. If anything goes * wrong, this function returns an error message in the interpreter's * result object. * *---------------------------------------------------------------------- */ static int NamespaceImportCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { int allowOverwrite = 0; const char *string, *pattern; register int i, result; int firstArg; if (objc < 1) { Tcl_WrongNumArgs(interp, 1, objv, "?-force? ?pattern pattern...?"); return TCL_ERROR; } /* * Skip over the optional "-force" as the first argument. */ firstArg = 1; if (firstArg < objc) { string = TclGetString(objv[firstArg]); if ((*string == '-') && (strcmp(string, "-force") == 0)) { allowOverwrite = 1; firstArg++; } } else { /* * When objc == 1, command is just [namespace import]. Introspection * form to return list of imported commands. */ Tcl_HashEntry *hPtr; Tcl_HashSearch search; Namespace *nsPtr = (Namespace *) TclGetCurrentNamespace(interp); Tcl_Obj *listPtr; TclNewObj(listPtr); for (hPtr = Tcl_FirstHashEntry(&nsPtr->cmdTable, &search); hPtr != NULL; hPtr = Tcl_NextHashEntry(&search)) { Command *cmdPtr = Tcl_GetHashValue(hPtr); if (cmdPtr->deleteProc == DeleteImportedCmd) { Tcl_ListObjAppendElement(NULL, listPtr, Tcl_NewStringObj( Tcl_GetHashKey(&nsPtr->cmdTable, hPtr) ,-1)); } } Tcl_SetObjResult(interp, listPtr); return TCL_OK; } /* * Handle the imports for each of the patterns. */ for (i = firstArg; i < objc; i++) { pattern = TclGetString(objv[i]); result = Tcl_Import(interp, NULL, pattern, allowOverwrite); if (result != TCL_OK) { return result; } } return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceInscopeCmd -- * * Invoked to implement the "namespace inscope" command that executes a * script in the context of a particular namespace. This command is not * expected to be used directly by programmers; calls to it are generated * implicitly when programs use "namespace code" commands to register * callback scripts. Handles the following syntax: * * namespace inscope name arg ?arg...? * * The "namespace inscope" command is much like the "namespace eval" * command except that it has lappend semantics and the namespace must * already exist. It treats the first argument as a list, and appends any * arguments after the first onto the end as proper list elements. For * example, * * namespace inscope ::foo {a b} c d e * * is equivalent to * * namespace eval ::foo [concat {a b} [list c d e]] * * This lappend semantics is important because many callback scripts are * actually prefixes. * * Results: * Returns TCL_OK to indicate success, or TCL_ERROR to indicate failure. * * Side effects: * Returns a result in the Tcl interpreter's result object. * *---------------------------------------------------------------------- */ static int NamespaceInscopeCmd( ClientData clientData, /* Arbitrary value passed to cmd. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { return Tcl_NRCallObjProc(interp, NRNamespaceInscopeCmd, clientData, objc, objv); } static int NRNamespaceInscopeCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tcl_Namespace *namespacePtr; CallFrame *framePtr, **framePtrPtr; register Interp *iPtr = (Interp *) interp; int i, result; Tcl_Obj *cmdObjPtr; if (objc < 3) { Tcl_WrongNumArgs(interp, 1, objv, "name arg ?arg...?"); return TCL_ERROR; } /* * Resolve the namespace reference. */ if (TclGetNamespaceFromObj(interp, objv[1], &namespacePtr) != TCL_OK) { return TCL_ERROR; } /* * Make the specified namespace the current namespace. */ framePtrPtr = &framePtr; /* This is needed to satisfy GCC's * strict aliasing rules. */ result = TclPushStackFrame(interp, (Tcl_CallFrame **) framePtrPtr, namespacePtr, /*isProcCallFrame*/ 0); if (result != TCL_OK) { return result; } if (iPtr->ensembleRewrite.sourceObjs == NULL) { framePtr->objc = objc; framePtr->objv = objv; } else { framePtr->objc = objc + iPtr->ensembleRewrite.numRemovedObjs - iPtr->ensembleRewrite.numInsertedObjs; framePtr->objv = iPtr->ensembleRewrite.sourceObjs; } /* * Execute the command. If there is just one argument, just treat it as a * script and evaluate it. Otherwise, create a list from the arguments * after the first one, then concatenate the first argument and the list * of extra arguments to form the command to evaluate. */ if (objc == 3) { cmdObjPtr = objv[2]; } else { Tcl_Obj *concatObjv[2]; register Tcl_Obj *listPtr; listPtr = Tcl_NewListObj(0, NULL); for (i = 3; i < objc; i++) { if (Tcl_ListObjAppendElement(interp, listPtr, objv[i]) != TCL_OK){ Tcl_DecrRefCount(listPtr); /* Free unneeded obj. */ return TCL_ERROR; } } concatObjv[0] = objv[2]; concatObjv[1] = listPtr; cmdObjPtr = Tcl_ConcatObj(2, concatObjv); Tcl_DecrRefCount(listPtr); /* We're done with the list object. */ } TclNRAddCallback(interp, NsEval_Callback, namespacePtr, "inscope", NULL, NULL); return TclNREvalObjEx(interp, cmdObjPtr, 0, NULL, 0); } /* *---------------------------------------------------------------------- * * NamespaceOriginCmd -- * * Invoked to implement the "namespace origin" command to return the * fully-qualified name of the "real" command to which the specified * "imported command" refers. Handles the following syntax: * * namespace origin name * * Results: * An imported command is created in an namespace when that namespace * imports a command from another namespace. If a command is imported * into a sequence of namespaces a, b,...,n where each successive * namespace just imports the command from the previous namespace, this * command returns the fully-qualified name of the original command in * the first namespace, a. If "name" does not refer to an alias, its * fully-qualified name is returned. The returned name is stored in the * interpreter's result object. This function returns TCL_OK if * successful, and TCL_ERROR if anything goes wrong. * * Side effects: * If anything goes wrong, this function returns an error message in the * interpreter's result object. * *---------------------------------------------------------------------- */ static int NamespaceOriginCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tcl_Command command, origCommand; Tcl_Obj *resultPtr; if (objc != 2) { Tcl_WrongNumArgs(interp, 1, objv, "name"); return TCL_ERROR; } command = Tcl_GetCommandFromObj(interp, objv[1]); if (command == NULL) { Tcl_AppendResult(interp, "invalid command name \"", TclGetString(objv[1]), "\"", NULL); Tcl_SetErrorCode(interp, "TCL", "LOOKUP", "COMMAND", TclGetString(objv[1]), NULL); return TCL_ERROR; } origCommand = TclGetOriginalCommand(command); TclNewObj(resultPtr); if (origCommand == NULL) { /* * The specified command isn't an imported command. Return the * command's name qualified by the full name of the namespace it was * defined in. */ Tcl_GetCommandFullName(interp, command, resultPtr); } else { Tcl_GetCommandFullName(interp, origCommand, resultPtr); } Tcl_SetObjResult(interp, resultPtr); return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceParentCmd -- * * Invoked to implement the "namespace parent" command that returns the * fully-qualified name of the parent namespace for a specified * namespace. Handles the following syntax: * * namespace parent ?name? * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Returns a result in the interpreter's result object. If anything goes * wrong, the result is an error message. * *---------------------------------------------------------------------- */ static int NamespaceParentCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tcl_Namespace *nsPtr; if (objc == 1) { nsPtr = TclGetCurrentNamespace(interp); } else if (objc == 2) { if (TclGetNamespaceFromObj(interp, objv[1], &nsPtr) != TCL_OK) { return TCL_ERROR; } } else { Tcl_WrongNumArgs(interp, 1, objv, "?name?"); return TCL_ERROR; } /* * Report the parent of the specified namespace. */ if (nsPtr->parentPtr != NULL) { Tcl_SetObjResult(interp, Tcl_NewStringObj( nsPtr->parentPtr->fullName, -1)); } return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespacePathCmd -- * * Invoked to implement the "namespace path" command that reads and * writes the current namespace's command resolution path. Has one * optional argument: if present, it is a list of named namespaces to set * the path to, and if absent, the current path should be returned. * Handles the following syntax: * * namespace path ?nsList? * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong * (most notably if the namespace list contains the name of something * other than a namespace). In the successful-exit case, may set the * interpreter result to the list of names of the namespaces on the * current namespace's path. * * Side effects: * May update the namespace path (triggering a recomputing of all command * names that depend on the namespace for resolution). * *---------------------------------------------------------------------- */ static int NamespacePathCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Namespace *nsPtr = (Namespace *) TclGetCurrentNamespace(interp); int i, nsObjc, result = TCL_ERROR; Tcl_Obj **nsObjv; Tcl_Namespace **namespaceList = NULL; if (objc > 2) { Tcl_WrongNumArgs(interp, 1, objv, "?pathList?"); return TCL_ERROR; } /* * If no path is given, return the current path. */ if (objc == 1) { /* * Not a very fast way to compute this, but easy to get right. */ for (i=0 ; icommandPathLength ; i++) { if (nsPtr->commandPathArray[i].nsPtr != NULL) { Tcl_AppendElement(interp, nsPtr->commandPathArray[i].nsPtr->fullName); } } return TCL_OK; } /* * There is a path given, so parse it into an array of namespace pointers. */ if (TclListObjGetElements(interp, objv[1], &nsObjc, &nsObjv) != TCL_OK) { goto badNamespace; } if (nsObjc != 0) { namespaceList = TclStackAlloc(interp, sizeof(Tcl_Namespace *) * nsObjc); for (i=0 ; icommandPathSourceList; if (tmpPathArray[i].nextPtr != NULL) { tmpPathArray[i].nextPtr->prevPtr = &tmpPathArray[i]; } tmpPathArray[i].nsPtr->commandPathSourceList = &tmpPathArray[i]; } if (nsPtr->commandPathLength != 0) { UnlinkNsPath(nsPtr); } nsPtr->commandPathArray = tmpPathArray; } else { if (nsPtr->commandPathLength != 0) { UnlinkNsPath(nsPtr); } } nsPtr->commandPathLength = pathLength; nsPtr->cmdRefEpoch++; nsPtr->resolverEpoch++; } /* *---------------------------------------------------------------------- * * UnlinkNsPath -- * * Delete the given namespace's command name resolution path. Only call * if the path is non-empty. Caller must reset the counter containing the * path size. * * Results: * nothing * * Side effects: * Deletes the array of path entries and unlinks those path entries from * the target namespace's list of interested namespaces. * *---------------------------------------------------------------------- */ static void UnlinkNsPath( Namespace *nsPtr) { int i; for (i=0 ; icommandPathLength ; i++) { NamespacePathEntry *nsPathPtr = &nsPtr->commandPathArray[i]; if (nsPathPtr->prevPtr != NULL) { nsPathPtr->prevPtr->nextPtr = nsPathPtr->nextPtr; } if (nsPathPtr->nextPtr != NULL) { nsPathPtr->nextPtr->prevPtr = nsPathPtr->prevPtr; } if (nsPathPtr->nsPtr != NULL) { if (nsPathPtr->nsPtr->commandPathSourceList == nsPathPtr) { nsPathPtr->nsPtr->commandPathSourceList = nsPathPtr->nextPtr; } } } ckfree(nsPtr->commandPathArray); } /* *---------------------------------------------------------------------- * * TclInvalidateNsPath -- * * Invalidate the name resolution caches for all names looked up in * namespaces whose name path includes the given namespace. * * Results: * nothing * * Side effects: * Increments the command reference epoch in each namespace whose path * includes the given namespace. This causes any cached resolved names * whose root cacheing context starts at that namespace to be recomputed * the next time they are used. * *---------------------------------------------------------------------- */ void TclInvalidateNsPath( Namespace *nsPtr) { NamespacePathEntry *nsPathPtr = nsPtr->commandPathSourceList; while (nsPathPtr != NULL) { if (nsPathPtr->nsPtr != NULL) { nsPathPtr->creatorNsPtr->cmdRefEpoch++; } nsPathPtr = nsPathPtr->nextPtr; } } /* *---------------------------------------------------------------------- * * NamespaceQualifiersCmd -- * * Invoked to implement the "namespace qualifiers" command that returns * any leading namespace qualifiers in a string. These qualifiers are * namespace names separated by "::"s. For example, for "::foo::p" this * command returns "::foo", and for "::" it returns "". This command is * the complement of the "namespace tail" command. Note that this command * does not check whether the "namespace" names are, in fact, the names * of currently defined namespaces. Handles the following syntax: * * namespace qualifiers string * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Returns a result in the interpreter's result object. If anything goes * wrong, the result is an error message. * *---------------------------------------------------------------------- */ static int NamespaceQualifiersCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { register const char *name, *p; int length; if (objc != 2) { Tcl_WrongNumArgs(interp, 1, objv, "string"); return TCL_ERROR; } /* * Find the end of the string, then work backward and find the start of * the last "::" qualifier. */ name = TclGetString(objv[1]); for (p = name; *p != '\0'; p++) { /* empty body */ } while (--p >= name) { if ((*p == ':') && (p > name) && (*(p-1) == ':')) { p -= 2; /* Back up over the :: */ while ((p >= name) && (*p == ':')) { p--; /* Back up over the preceeding : */ } break; } } if (p >= name) { length = p-name+1; Tcl_SetObjResult(interp, Tcl_NewStringObj(name, length)); } return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceUnknownCmd -- * * Invoked to implement the "namespace unknown" command (TIP 181) that * sets or queries a per-namespace unknown command handler. This handler * is called when command lookup fails (current and global ns). The * default handler for the global namespace is ::unknown. The default * handler for other namespaces is to call the global namespace unknown * handler. Passing an empty list results in resetting the handler to its * default. * * namespace unknown ?handler? * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * If no handler is specified, returns a result in the interpreter's * result object, otherwise it sets the unknown handler pointer in the * current namespace to the script fragment provided. If anything goes * wrong, the result is an error message. * *---------------------------------------------------------------------- */ static int NamespaceUnknownCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Tcl_Namespace *currNsPtr; Tcl_Obj *resultPtr; int rc; if (objc > 2) { Tcl_WrongNumArgs(interp, 1, objv, "?script?"); return TCL_ERROR; } currNsPtr = TclGetCurrentNamespace(interp); if (objc == 1) { /* * Introspection - return the current namespace handler. */ resultPtr = Tcl_GetNamespaceUnknownHandler(interp, currNsPtr); if (resultPtr == NULL) { TclNewObj(resultPtr); } Tcl_SetObjResult(interp, resultPtr); } else { rc = Tcl_SetNamespaceUnknownHandler(interp, currNsPtr, objv[1]); if (rc == TCL_OK) { Tcl_SetObjResult(interp, objv[1]); } return rc; } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_GetNamespaceUnknownHandler -- * * Returns the unknown command handler registered for the given * namespace. * * Results: * Returns the current unknown command handler, or NULL if none exists * for the namespace. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Obj * Tcl_GetNamespaceUnknownHandler( Tcl_Interp *interp, /* The interpreter in which the namespace * exists. */ Tcl_Namespace *nsPtr) /* The namespace. */ { Namespace *currNsPtr = (Namespace *) nsPtr; if (currNsPtr->unknownHandlerPtr == NULL && currNsPtr == ((Interp *) interp)->globalNsPtr) { /* * Default handler for global namespace is "::unknown". For all other * namespaces, it is NULL (which falls back on the global unknown * handler). */ TclNewLiteralStringObj(currNsPtr->unknownHandlerPtr, "::unknown"); Tcl_IncrRefCount(currNsPtr->unknownHandlerPtr); } return currNsPtr->unknownHandlerPtr; } /* *---------------------------------------------------------------------- * * Tcl_SetNamespaceUnknownHandler -- * * Sets the unknown command handler for the given namespace to the * command prefix passed. * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Sets the namespace unknown command handler. If the passed in handler * is NULL or an empty list, then the handler is reset to its default. If * an error occurs, then an error message is left in the interpreter * result. * *---------------------------------------------------------------------- */ int Tcl_SetNamespaceUnknownHandler( Tcl_Interp *interp, /* Interpreter in which the namespace * exists. */ Tcl_Namespace *nsPtr, /* Namespace which is being updated. */ Tcl_Obj *handlerPtr) /* The new handler, or NULL to reset. */ { int lstlen = 0; Namespace *currNsPtr = (Namespace *) nsPtr; /* * Ensure that we check for errors *first* before we change anything. */ if (handlerPtr != NULL) { if (TclListObjLength(interp, handlerPtr, &lstlen) != TCL_OK) { /* * Not a list. */ return TCL_ERROR; } if (lstlen > 0) { /* * We are going to be saving this handler. Increment the reference * count before decrementing the refcount on the previous handler, * so that nothing strange can happen if we are told to set the * handler to the previous value. */ Tcl_IncrRefCount(handlerPtr); } } /* * Remove old handler next. */ if (currNsPtr->unknownHandlerPtr != NULL) { Tcl_DecrRefCount(currNsPtr->unknownHandlerPtr); } /* * Install the new handler. */ if (lstlen > 0) { /* * Just store the handler. It already has the correct reference count. */ currNsPtr->unknownHandlerPtr = handlerPtr; } else { /* * If NULL or an empty list is passed, this resets to the default * handler. */ currNsPtr->unknownHandlerPtr = NULL; } return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceTailCmd -- * * Invoked to implement the "namespace tail" command that returns the * trailing name at the end of a string with "::" namespace qualifiers. * These qualifiers are namespace names separated by "::"s. For example, * for "::foo::p" this command returns "p", and for "::" it returns "". * This command is the complement of the "namespace qualifiers" command. * Note that this command does not check whether the "namespace" names * are, in fact, the names of currently defined namespaces. Handles the * following syntax: * * namespace tail string * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Returns a result in the interpreter's result object. If anything goes * wrong, the result is an error message. * *---------------------------------------------------------------------- */ static int NamespaceTailCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { register const char *name, *p; if (objc != 2) { Tcl_WrongNumArgs(interp, 1, objv, "string"); return TCL_ERROR; } /* * Find the end of the string, then work backward and find the last "::" * qualifier. */ name = TclGetString(objv[1]); for (p = name; *p != '\0'; p++) { /* empty body */ } while (--p > name) { if ((*p == ':') && (*(p-1) == ':')) { p++; /* Just after the last "::" */ break; } } if (p >= name) { Tcl_SetObjResult(interp, Tcl_NewStringObj(p, -1)); } return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceUpvarCmd -- * * Invoked to implement the "namespace upvar" command, that creates * variables in the current scope linked to variables in another * namespace. Handles the following syntax: * * namespace upvar ns otherVar myVar ?otherVar myVar ...? * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Creates new variables in the current scope, linked to the * corresponding variables in the stipulated nmamespace. If anything goes * wrong, the result is an error message. * *---------------------------------------------------------------------- */ static int NamespaceUpvarCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { Interp *iPtr = (Interp *) interp; Tcl_Namespace *nsPtr, *savedNsPtr; Var *otherPtr, *arrayPtr; const char *myName; if (objc < 2 || (objc & 1)) { Tcl_WrongNumArgs(interp, 1, objv, "ns ?otherVar myVar ...?"); return TCL_ERROR; } if (TclGetNamespaceFromObj(interp, objv[1], &nsPtr) != TCL_OK) { return TCL_ERROR; } objc -= 2; objv += 2; for (; objc>0 ; objc-=2, objv+=2) { /* * Locate the other variable. */ savedNsPtr = (Tcl_Namespace *) iPtr->varFramePtr->nsPtr; iPtr->varFramePtr->nsPtr = (Namespace *) nsPtr; otherPtr = TclObjLookupVarEx(interp, objv[0], NULL, (TCL_NAMESPACE_ONLY | TCL_LEAVE_ERR_MSG), "access", /*createPart1*/ 1, /*createPart2*/ 1, &arrayPtr); iPtr->varFramePtr->nsPtr = (Namespace *) savedNsPtr; if (otherPtr == NULL) { return TCL_ERROR; } /* * Create the new variable and link it to otherPtr. */ myName = TclGetString(objv[1]); if (TclPtrMakeUpvar(interp, otherPtr, myName, 0, -1) != TCL_OK) { return TCL_ERROR; } } return TCL_OK; } /* *---------------------------------------------------------------------- * * NamespaceWhichCmd -- * * Invoked to implement the "namespace which" command that returns the * fully-qualified name of a command or variable. If the specified * command or variable does not exist, it returns "". Handles the * following syntax: * * namespace which ?-command? ?-variable? name * * Results: * Returns TCL_OK if successful, and TCL_ERROR if anything goes wrong. * * Side effects: * Returns a result in the interpreter's result object. If anything goes * wrong, the result is an error message. * *---------------------------------------------------------------------- */ static int NamespaceWhichCmd( ClientData dummy, /* Not used. */ Tcl_Interp *interp, /* Current interpreter. */ int objc, /* Number of arguments. */ Tcl_Obj *const objv[]) /* Argument objects. */ { static const char *const opts[] = { "-command", "-variable", NULL }; int lookupType = 0; Tcl_Obj *resultPtr; if (objc < 2 || objc > 3) { badArgs: Tcl_WrongNumArgs(interp, 1, objv, "?-command? ?-variable? name"); return TCL_ERROR; } else if (objc == 3) { /* * Look for a flag controlling the lookup. */ if (Tcl_GetIndexFromObj(interp, objv[1], opts, "option", 0, &lookupType) != TCL_OK) { /* * Preserve old style of error message! */ Tcl_ResetResult(interp); goto badArgs; } } TclNewObj(resultPtr); switch (lookupType) { case 0: { /* -command */ Tcl_Command cmd = Tcl_GetCommandFromObj(interp, objv[objc-1]); if (cmd != NULL) { Tcl_GetCommandFullName(interp, cmd, resultPtr); } break; } case 1: { /* -variable */ Tcl_Var var = Tcl_FindNamespaceVar(interp, TclGetString(objv[objc-1]), NULL, /*flags*/ 0); if (var != NULL) { Tcl_GetVariableFullName(interp, var, resultPtr); } break; } } Tcl_SetObjResult(interp, resultPtr); return TCL_OK; } /* *---------------------------------------------------------------------- * * FreeNsNameInternalRep -- * * Frees the resources associated with a nsName object's internal * representation. * * Results: * None. * * Side effects: * Decrements the ref count of any Namespace structure pointed to by the * nsName's internal representation. If there are no more references to * the namespace, it's structure will be freed. * *---------------------------------------------------------------------- */ static void FreeNsNameInternalRep( register Tcl_Obj *objPtr) /* nsName object with internal representation * to free. */ { ResolvedNsName *resNamePtr = objPtr->internalRep.twoPtrValue.ptr1; /* * Decrement the reference count of the namespace. If there are no more * references, free it up. */ resNamePtr->refCount--; if (resNamePtr->refCount == 0) { /* * Decrement the reference count for the cached namespace. If the * namespace is dead, and there are no more references to it, free * it. */ TclNsDecrRefCount(resNamePtr->nsPtr); ckfree(resNamePtr); } objPtr->typePtr = NULL; } /* *---------------------------------------------------------------------- * * DupNsNameInternalRep -- * * Initializes the internal representation of a nsName object to a copy * of the internal representation of another nsName object. * * Results: * None. * * Side effects: * copyPtr's internal rep is set to refer to the same namespace * referenced by srcPtr's internal rep. Increments the ref count of the * ResolvedNsName structure used to hold the namespace reference. * *---------------------------------------------------------------------- */ static void DupNsNameInternalRep( Tcl_Obj *srcPtr, /* Object with internal rep to copy. */ register Tcl_Obj *copyPtr) /* Object with internal rep to set. */ { ResolvedNsName *resNamePtr = srcPtr->internalRep.twoPtrValue.ptr1; copyPtr->internalRep.twoPtrValue.ptr1 = resNamePtr; resNamePtr->refCount++; copyPtr->typePtr = &nsNameType; } /* *---------------------------------------------------------------------- * * SetNsNameFromAny -- * * Attempt to generate a nsName internal representation for a Tcl object. * * Results: * Returns TCL_OK if the value could be converted to a proper namespace * reference. Otherwise, it returns TCL_ERROR, along with an error * message in the interpreter's result object. * * Side effects: * If successful, the object is made a nsName object. Its internal rep is * set to point to a ResolvedNsName, which contains a cached pointer to * the Namespace. Reference counts are kept on both the ResolvedNsName * and the Namespace, so we can keep track of their usage and free them * when appropriate. * *---------------------------------------------------------------------- */ static int SetNsNameFromAny( Tcl_Interp *interp, /* Points to the namespace in which to resolve * name. Also used for error reporting if not * NULL. */ register Tcl_Obj *objPtr) /* The object to convert. */ { const char *dummy; Namespace *nsPtr, *dummy1Ptr, *dummy2Ptr; register ResolvedNsName *resNamePtr; const char *name = TclGetString(objPtr); TclGetNamespaceForQualName(interp, name, NULL, TCL_FIND_ONLY_NS, &nsPtr, &dummy1Ptr, &dummy2Ptr, &dummy); /* * If we found a namespace, then create a new ResolvedNsName structure * that holds a reference to it. */ if ((nsPtr == NULL) || (nsPtr->flags & NS_DYING)) { /* * Our failed lookup proves any previously cached nsName intrep is no * longer valid. Get rid of it so we no longer waste memory storing * it, nor time determining its invalidity again and again. */ if (objPtr->typePtr == &nsNameType) { TclFreeIntRep(objPtr); objPtr->typePtr = NULL; } return TCL_ERROR; } nsPtr->refCount++; resNamePtr = ckalloc(sizeof(ResolvedNsName)); resNamePtr->nsPtr = nsPtr; if ((name[0] == ':') && (name[1] == ':')) { resNamePtr->refNsPtr = NULL; } else { resNamePtr->refNsPtr = (Namespace *) Tcl_GetCurrentNamespace(interp); } resNamePtr->refCount = 1; TclFreeIntRep(objPtr); objPtr->internalRep.twoPtrValue.ptr1 = resNamePtr; objPtr->typePtr = &nsNameType; return TCL_OK; } /* *---------------------------------------------------------------------- * * TclGetNamespaceCommandTable -- * * Returns the hash table of commands. * * Results: * Pointer to the hash table. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_HashTable * TclGetNamespaceCommandTable( Tcl_Namespace *nsPtr) { return &((Namespace *) nsPtr)->cmdTable; } /* *---------------------------------------------------------------------- * * TclGetNamespaceChildTable -- * * Returns the hash table of child namespaces. * * Results: * Pointer to the hash table. * * Side effects: * Might allocate memory. * *---------------------------------------------------------------------- */ Tcl_HashTable * TclGetNamespaceChildTable( Tcl_Namespace *nsPtr) { Namespace *nPtr = (Namespace *) nsPtr; #ifndef BREAK_NAMESPACE_COMPAT return &nPtr->childTable; #else if (nPtr->childTablePtr == NULL) { nPtr->childTablePtr = ckalloc(sizeof(Tcl_HashTable)); Tcl_InitHashTable(nPtr->childTablePtr, TCL_STRING_KEYS); } return nPtr->childTablePtr; #endif } /* *---------------------------------------------------------------------- * * TclLogCommandInfo -- * * This function is invoked after an error occurs in an interpreter. It * adds information to iPtr->errorInfo/errorStack fields to describe the * command that was being executed when the error occurred. When pc and * tosPtr are non-NULL, conveying a bytecode execution "inner context", * and the offending instruction is suitable, that inner context is * recorded in errorStack. * * Results: * None. * * Side effects: * Information about the command is added to errorInfo/errorStack and the * line number stored internally in the interpreter is set. * *---------------------------------------------------------------------- */ void TclLogCommandInfo( Tcl_Interp *interp, /* Interpreter in which to log information. */ const char *script, /* First character in script containing * command (must be <= command). */ const char *command, /* First character in command that generated * the error. */ int length, /* Number of bytes in command (-1 means use * all bytes up to first null byte). */ const unsigned char *pc, /* current pc of bytecode execution context */ Tcl_Obj **tosPtr) /* current stack of bytecode execution context */ { register const char *p; Interp *iPtr = (Interp *) interp; int overflow, limit = 150; Var *varPtr, *arrayPtr; if (iPtr->flags & ERR_ALREADY_LOGGED) { /* * Someone else has already logged error information for this command; * we shouldn't add anything more. */ return; } if (command != NULL) { /* * Compute the line number where the error occurred. */ iPtr->errorLine = 1; for (p = script; p != command; p++) { if (*p == '\n') { iPtr->errorLine++; } } if (length < 0) { length = strlen(command); } overflow = (length > limit); Tcl_AppendObjToErrorInfo(interp, Tcl_ObjPrintf( "\n %s\n\"%.*s%s\"", ((iPtr->errorInfo == NULL) ? "while executing" : "invoked from within"), (overflow ? limit : length), command, (overflow ? "..." : ""))); varPtr = TclObjLookupVarEx(interp, iPtr->eiVar, NULL, TCL_GLOBAL_ONLY, NULL, 0, 0, &arrayPtr); if ((varPtr == NULL) || !TclIsVarTraced(varPtr)) { /* * Should not happen. */ return; } else { Tcl_HashEntry *hPtr = Tcl_FindHashEntry(&iPtr->varTraces, (char *) varPtr); VarTrace *tracePtr = Tcl_GetHashValue(hPtr); if (tracePtr->traceProc != EstablishErrorInfoTraces) { /* * The most recent trace set on ::errorInfo is not the one the * core itself puts on last. This means some other code is * tracing the variable, and the additional trace(s) might be * write traces that expect the timing of writes to * ::errorInfo that existed Tcl releases before 8.5. To * satisfy that compatibility need, we write the current * -errorinfo value to the ::errorInfo variable. */ Tcl_ObjSetVar2(interp, iPtr->eiVar, NULL, iPtr->errorInfo, TCL_GLOBAL_ONLY); } } } /* * TIP #348 */ if (Tcl_IsShared(iPtr->errorStack)) { Tcl_Obj *newObj; newObj = Tcl_DuplicateObj(iPtr->errorStack); Tcl_DecrRefCount(iPtr->errorStack); Tcl_IncrRefCount(newObj); iPtr->errorStack = newObj; } if (iPtr->resetErrorStack) { int len; iPtr->resetErrorStack = 0; Tcl_ListObjLength(interp, iPtr->errorStack, &len); /* reset while keeping the list intrep as much as possible */ Tcl_ListObjReplace(interp, iPtr->errorStack, 0, len, 0, NULL); if (pc != NULL) { Tcl_Obj *innerContext; innerContext = TclGetInnerContext(interp, pc, tosPtr); if (innerContext != NULL) { Tcl_ListObjAppendElement(NULL, iPtr->errorStack, iPtr->innerLiteral); Tcl_ListObjAppendElement(NULL, iPtr->errorStack, innerContext); } } else if (command != NULL) { Tcl_ListObjAppendElement(NULL, iPtr->errorStack, iPtr->innerLiteral); Tcl_ListObjAppendElement(NULL, iPtr->errorStack, Tcl_NewStringObj(command, length)); } } if (!iPtr->framePtr->objc) { /* special frame, nothing to report */ } else if (iPtr->varFramePtr != iPtr->framePtr) { /* uplevel case, [lappend errorstack UP $relativelevel] */ Tcl_ListObjAppendElement(NULL, iPtr->errorStack, iPtr->upLiteral); Tcl_ListObjAppendElement(NULL, iPtr->errorStack, Tcl_NewIntObj( iPtr->framePtr->level - iPtr->varFramePtr->level)); } else if (iPtr->framePtr != iPtr->rootFramePtr) { /* normal case, [lappend errorstack CALL [info level 0]] */ Tcl_ListObjAppendElement(NULL, iPtr->errorStack, iPtr->callLiteral); Tcl_ListObjAppendElement(NULL, iPtr->errorStack, Tcl_NewListObj( iPtr->framePtr->objc, iPtr->framePtr->objv)); } } /* *---------------------------------------------------------------------- * * TclErrorStackResetIf -- * * The TIP 348 reset/no-bc part of TLCI, for specific use by * TclCompileSyntaxError. * * Results: * None. * * Side effects: * Reset errorstack if it needs be, and in that case remember the * passed-in error message as inner context. * *---------------------------------------------------------------------- */ void TclErrorStackResetIf(Tcl_Interp *interp, const char *msg, int length) { Interp *iPtr = (Interp *) interp; if (Tcl_IsShared(iPtr->errorStack)) { Tcl_Obj *newObj; newObj = Tcl_DuplicateObj(iPtr->errorStack); Tcl_DecrRefCount(iPtr->errorStack); Tcl_IncrRefCount(newObj); iPtr->errorStack = newObj; } if (iPtr->resetErrorStack) { int len; iPtr->resetErrorStack = 0; Tcl_ListObjLength(interp, iPtr->errorStack, &len); /* reset while keeping the list intrep as much as possible */ Tcl_ListObjReplace(interp, iPtr->errorStack, 0, len, 0, NULL); Tcl_ListObjAppendElement(NULL, iPtr->errorStack, iPtr->innerLiteral); Tcl_ListObjAppendElement(NULL, iPtr->errorStack, Tcl_NewStringObj(msg, length)); } } /* *---------------------------------------------------------------------- * * Tcl_LogCommandInfo -- * * This function is invoked after an error occurs in an interpreter. It * adds information to iPtr->errorInfo/errorStack fields to describe the * command that was being executed when the error occurred. * * Results: * None. * * Side effects: * Information about the command is added to errorInfo/errorStack and the * line number stored internally in the interpreter is set. * *---------------------------------------------------------------------- */ void Tcl_LogCommandInfo( Tcl_Interp *interp, /* Interpreter in which to log information. */ const char *script, /* First character in script containing * command (must be <= command). */ const char *command, /* First character in command that generated * the error. */ int length) /* Number of bytes in command (-1 means use * all bytes up to first null byte). */ { TclLogCommandInfo(interp, script, command, length, NULL, NULL); } /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * tab-width: 8 * indent-tabs-mode: nil * End: */