/* * tclParse.c -- * * This file contains procedures that parse Tcl scripts. They * do so in a general-purpose fashion that can be used for many * different purposes, including compilation, direct execution, * code analysis, etc. * * Copyright (c) 1997 Sun Microsystems, Inc. * Copyright (c) 1998-2000 Ajuba Solutions. * Contributions from Don Porter, NIST, 2002. (not subject to US copyright) * * See the file "license.terms" for information on usage and redistribution * of this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tclParse.c,v 1.25.2.4 2009/09/28 21:20:51 dgp Exp $ */ #include "tclInt.h" #include "tclPort.h" /* * The following table provides parsing information about each possible * 8-bit character. The table is designed to be referenced with either * signed or unsigned characters, so it has 384 entries. The first 128 * entries correspond to negative character values, the next 256 correspond * to positive character values. The last 128 entries are identical to the * first 128. The table is always indexed with a 128-byte offset (the 128th * entry corresponds to a character value of 0). * * The macro CHAR_TYPE is used to index into the table and return * information about its character argument. The following return * values are defined. * * TYPE_NORMAL - All characters that don't have special significance * to the Tcl parser. * TYPE_SPACE - The character is a whitespace character other * than newline. * TYPE_COMMAND_END - Character is newline or semicolon. * TYPE_SUBS - Character begins a substitution or has other * special meaning in ParseTokens: backslash, dollar * sign, or open bracket. * TYPE_QUOTE - Character is a double quote. * TYPE_CLOSE_PAREN - Character is a right parenthesis. * TYPE_CLOSE_BRACK - Character is a right square bracket. * TYPE_BRACE - Character is a curly brace (either left or right). */ #define TYPE_NORMAL 0 #define TYPE_SPACE 0x1 #define TYPE_COMMAND_END 0x2 #define TYPE_SUBS 0x4 #define TYPE_QUOTE 0x8 #define TYPE_CLOSE_PAREN 0x10 #define TYPE_CLOSE_BRACK 0x20 #define TYPE_BRACE 0x40 #define CHAR_TYPE(c) (charTypeTable+128)[(int)(c)] static CONST char charTypeTable[] = { /* * Negative character values, from -128 to -1: */ TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, /* * Positive character values, from 0-127: */ TYPE_SUBS, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_SPACE, TYPE_COMMAND_END, TYPE_SPACE, TYPE_SPACE, TYPE_SPACE, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_SPACE, TYPE_NORMAL, TYPE_QUOTE, TYPE_NORMAL, TYPE_SUBS, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_CLOSE_PAREN, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_COMMAND_END, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_SUBS, TYPE_SUBS, TYPE_CLOSE_BRACK, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_BRACE, TYPE_NORMAL, TYPE_BRACE, TYPE_NORMAL, TYPE_NORMAL, /* * Large unsigned character values, from 128-255: */ TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, TYPE_NORMAL, }; /* * Prototypes for local procedures defined in this file: */ static int CommandComplete _ANSI_ARGS_((CONST char *script, int numBytes)); static int ParseComment _ANSI_ARGS_((CONST char *src, int numBytes, Tcl_Parse *parsePtr)); static int ParseTokens _ANSI_ARGS_((CONST char *src, int numBytes, int mask, Tcl_Parse *parsePtr)); /* *---------------------------------------------------------------------- * * Tcl_ParseCommand -- * * Given a string, this procedure parses the first Tcl command * in the string and returns information about the structure of * the command. * * Results: * The return value is TCL_OK if the command was parsed * successfully and TCL_ERROR otherwise. If an error occurs * and interp isn't NULL then an error message is left in * its result. On a successful return, parsePtr is filled in * with information about the command that was parsed. * * Side effects: * If there is insufficient space in parsePtr to hold all the * information about the command, then additional space is * malloc-ed. If the procedure returns TCL_OK then the caller must * eventually invoke Tcl_FreeParse to release any additional space * that was allocated. * *---------------------------------------------------------------------- */ int Tcl_ParseCommand(interp, string, numBytes, nested, parsePtr) Tcl_Interp *interp; /* Interpreter to use for error reporting; * if NULL, then no error message is * provided. */ CONST char *string; /* First character of string containing * one or more Tcl commands. */ register int numBytes; /* Total number of bytes in string. If < 0, * the script consists of all bytes up to * the first null character. */ int nested; /* Non-zero means this is a nested command: * close bracket should be considered * a command terminator. If zero, then close * bracket has no special meaning. */ register Tcl_Parse *parsePtr; /* Structure to fill in with information * about the parsed command; any previous * information in the structure is * ignored. */ { register CONST char *src; /* Points to current character * in the command. */ char type; /* Result returned by CHAR_TYPE(*src). */ Tcl_Token *tokenPtr; /* Pointer to token being filled in. */ int wordIndex; /* Index of word token for current word. */ int terminators; /* CHAR_TYPE bits that indicate the end * of a command. */ CONST char *termPtr; /* Set by Tcl_ParseBraces/QuotedString to * point to char after terminating one. */ int scanned; if ((string == NULL) && (numBytes!=0)) { if (interp != NULL) { Tcl_SetResult(interp, "can't parse a NULL pointer", TCL_STATIC); } return TCL_ERROR; } if (numBytes < 0) { numBytes = strlen(string); } parsePtr->commentStart = NULL; parsePtr->commentSize = 0; parsePtr->commandStart = NULL; parsePtr->commandSize = 0; parsePtr->numWords = 0; parsePtr->tokenPtr = parsePtr->staticTokens; parsePtr->numTokens = 0; parsePtr->tokensAvailable = NUM_STATIC_TOKENS; parsePtr->string = string; parsePtr->end = string + numBytes; parsePtr->term = parsePtr->end; parsePtr->interp = interp; parsePtr->incomplete = 0; parsePtr->errorType = TCL_PARSE_SUCCESS; if (nested != 0) { terminators = TYPE_COMMAND_END | TYPE_CLOSE_BRACK; } else { terminators = TYPE_COMMAND_END; } /* * Parse any leading space and comments before the first word of the * command. */ scanned = ParseComment(string, numBytes, parsePtr); src = (string + scanned); numBytes -= scanned; if (numBytes == 0) { if (nested) { parsePtr->incomplete = nested; } } /* * The following loop parses the words of the command, one word * in each iteration through the loop. */ parsePtr->commandStart = src; while (1) { /* * Create the token for the word. */ if (parsePtr->numTokens == parsePtr->tokensAvailable) { TclExpandTokenArray(parsePtr); } wordIndex = parsePtr->numTokens; tokenPtr = &parsePtr->tokenPtr[wordIndex]; tokenPtr->type = TCL_TOKEN_WORD; /* * Skip white space before the word. Also skip a backslash-newline * sequence: it should be treated just like white space. */ scanned = TclParseWhiteSpace(src, numBytes, parsePtr, &type); src += scanned; numBytes -= scanned; if (numBytes == 0) { parsePtr->term = src; break; } if ((type & terminators) != 0) { parsePtr->term = src; src++; break; } tokenPtr->start = src; parsePtr->numTokens++; parsePtr->numWords++; /* * At this point the word can have one of three forms: something * enclosed in quotes, something enclosed in braces, or an * unquoted word (anything else). */ if (*src == '"') { if (Tcl_ParseQuotedString(interp, src, numBytes, parsePtr, 1, &termPtr) != TCL_OK) { goto error; } src = termPtr; numBytes = parsePtr->end - src; } else if (*src == '{') { if (Tcl_ParseBraces(interp, src, numBytes, parsePtr, 1, &termPtr) != TCL_OK) { goto error; } src = termPtr; numBytes = parsePtr->end - src; } else { /* * This is an unquoted word. Call ParseTokens and let it do * all of the work. */ if (ParseTokens(src, numBytes, TYPE_SPACE|terminators, parsePtr) != TCL_OK) { goto error; } src = parsePtr->term; numBytes = parsePtr->end - src; } /* * Finish filling in the token for the word and check for the * special case of a word consisting of a single range of * literal text. */ tokenPtr = &parsePtr->tokenPtr[wordIndex]; tokenPtr->size = src - tokenPtr->start; tokenPtr->numComponents = parsePtr->numTokens - (wordIndex + 1); if ((tokenPtr->numComponents == 1) && (tokenPtr[1].type == TCL_TOKEN_TEXT)) { tokenPtr->type = TCL_TOKEN_SIMPLE_WORD; } /* * Do two additional checks: (a) make sure we're really at the * end of a word (there might have been garbage left after a * quoted or braced word), and (b) check for the end of the * command. */ scanned = TclParseWhiteSpace(src, numBytes, parsePtr, &type); if (scanned) { src += scanned; numBytes -= scanned; continue; } if (numBytes == 0) { parsePtr->term = src; break; } if ((type & terminators) != 0) { parsePtr->term = src; src++; break; } if (src[-1] == '"') { if (interp != NULL) { Tcl_SetResult(interp, "extra characters after close-quote", TCL_STATIC); } parsePtr->errorType = TCL_PARSE_QUOTE_EXTRA; } else { if (interp != NULL) { Tcl_SetResult(interp, "extra characters after close-brace", TCL_STATIC); } parsePtr->errorType = TCL_PARSE_BRACE_EXTRA; } parsePtr->term = src; goto error; } parsePtr->commandSize = src - parsePtr->commandStart; return TCL_OK; error: Tcl_FreeParse(parsePtr); if (parsePtr->commandStart == NULL) { parsePtr->commandStart = string; } parsePtr->commandSize = parsePtr->end - parsePtr->commandStart; return TCL_ERROR; } /* *---------------------------------------------------------------------- * * TclParseWhiteSpace -- * * Scans up to numBytes bytes starting at src, consuming white * space as defined by Tcl's parsing rules. * * Results: * Returns the number of bytes recognized as white space. Records * at parsePtr, information about the parse. Records at typePtr * the character type of the non-whitespace character that terminated * the scan. * * Side effects: * None. * *---------------------------------------------------------------------- */ int TclParseWhiteSpace(src, numBytes, parsePtr, typePtr) CONST char *src; /* First character to parse. */ register int numBytes; /* Max number of bytes to scan. */ Tcl_Parse *parsePtr; /* Information about parse in progress. * Updated if parsing indicates * an incomplete command. */ char *typePtr; /* Points to location to store character * type of character that ends run * of whitespace */ { register char type = TYPE_NORMAL; register CONST char *p = src; while (1) { while (numBytes && ((type = CHAR_TYPE(*p)) & TYPE_SPACE)) { numBytes--; p++; } if (numBytes && (type & TYPE_SUBS)) { if (*p != '\\') { break; } if (--numBytes == 0) { break; } if (p[1] != '\n') { break; } p+=2; if (--numBytes == 0) { parsePtr->incomplete = 1; break; } continue; } break; } *typePtr = type; return (p - src); } /* *---------------------------------------------------------------------- * * TclParseHex -- * * Scans a hexadecimal number as a Tcl_UniChar value. * (e.g., for parsing \x and \u escape sequences). * At most numBytes bytes are scanned. * * Results: * The numeric value is stored in *resultPtr. * Returns the number of bytes consumed. * * Notes: * Relies on the following properties of the ASCII * character set, with which UTF-8 is compatible: * * The digits '0' .. '9' and the letters 'A' .. 'Z' and 'a' .. 'z' * occupy consecutive code points, and '0' < 'A' < 'a'. * *---------------------------------------------------------------------- */ int TclParseHex(src, numBytes, resultPtr) CONST char *src; /* First character to parse. */ int numBytes; /* Max number of byes to scan */ Tcl_UniChar *resultPtr; /* Points to storage provided by * caller where the Tcl_UniChar * resulting from the conversion is * to be written. */ { Tcl_UniChar result = 0; register CONST char *p = src; while (numBytes--) { unsigned char digit = UCHAR(*p); if (!isxdigit(digit)) break; ++p; result <<= 4; if (digit >= 'a') { result |= (10 + digit - 'a'); } else if (digit >= 'A') { result |= (10 + digit - 'A'); } else { result |= (digit - '0'); } } *resultPtr = result; return (p - src); } /* *---------------------------------------------------------------------- * * TclParseBackslash -- * * Scans up to numBytes bytes starting at src, consuming a * backslash sequence as defined by Tcl's parsing rules. * * Results: * Records at readPtr the number of bytes making up the backslash * sequence. Records at dst the UTF-8 encoded equivalent of * that backslash sequence. Returns the number of bytes written * to dst, at most TCL_UTF_MAX. Either readPtr or dst may be * NULL, if the results are not needed, but the return value is * the same either way. * * Side effects: * None. * *---------------------------------------------------------------------- */ int TclParseBackslash(src, numBytes, readPtr, dst) CONST char * src; /* Points to the backslash character of a * a backslash sequence */ int numBytes; /* Max number of bytes to scan */ int *readPtr; /* NULL, or points to storage where the * number of bytes scanned should be written. */ char *dst; /* NULL, or points to buffer where the UTF-8 * encoding of the backslash sequence is to be * written. At most TCL_UTF_MAX bytes will be * written there. */ { register CONST char *p = src+1; Tcl_UniChar result; int count; char buf[TCL_UTF_MAX]; if (numBytes == 0) { if (readPtr != NULL) { *readPtr = 0; } return 0; } if (dst == NULL) { dst = buf; } if (numBytes == 1) { /* Can only scan the backslash. Return it. */ result = '\\'; count = 1; goto done; } count = 2; switch (*p) { /* * Note: in the conversions below, use absolute values (e.g., * 0xa) rather than symbolic values (e.g. \n) that get converted * by the compiler. It's possible that compilers on some * platforms will do the symbolic conversions differently, which * could result in non-portable Tcl scripts. */ case 'a': result = 0x7; break; case 'b': result = 0x8; break; case 'f': result = 0xc; break; case 'n': result = 0xa; break; case 'r': result = 0xd; break; case 't': result = 0x9; break; case 'v': result = 0xb; break; case 'x': count += TclParseHex(p+1, numBytes-1, &result); if (count == 2) { /* No hexadigits -> This is just "x". */ result = 'x'; } else { /* Keep only the last byte (2 hex digits) */ result = (unsigned char) result; } break; case 'u': count += TclParseHex(p+1, (numBytes > 5) ? 4 : numBytes-1, &result); if (count == 2) { /* No hexadigits -> This is just "u". */ result = 'u'; } break; case '\n': count--; do { p++; count++; } while ((count < numBytes) && ((*p == ' ') || (*p == '\t'))); result = ' '; break; case 0: result = '\\'; count = 1; break; default: /* * Check for an octal number \oo?o? */ if (isdigit(UCHAR(*p)) && (UCHAR(*p) < '8')) { /* INTL: digit */ result = (unsigned char)(*p - '0'); p++; if ((numBytes == 2) || !isdigit(UCHAR(*p)) /* INTL: digit */ || (UCHAR(*p) >= '8')) { break; } count = 3; result = (unsigned char)((result << 3) + (*p - '0')); p++; if ((numBytes == 3) || !isdigit(UCHAR(*p)) /* INTL: digit */ || (UCHAR(*p) >= '8')) { break; } count = 4; result = (unsigned char)((result << 3) + (*p - '0')); break; } /* * We have to convert here in case the user has put a * backslash in front of a multi-byte utf-8 character. * While this means nothing special, we shouldn't break up * a correct utf-8 character. [Bug #217987] test subst-3.2 */ if (Tcl_UtfCharComplete(p, numBytes - 1)) { count = Tcl_UtfToUniChar(p, &result) + 1; /* +1 for '\' */ } else { char utfBytes[TCL_UTF_MAX]; memcpy(utfBytes, p, (size_t) (numBytes - 1)); utfBytes[numBytes - 1] = '\0'; count = Tcl_UtfToUniChar(utfBytes, &result) + 1; } break; } done: if (readPtr != NULL) { *readPtr = count; } return Tcl_UniCharToUtf((int) result, dst); } /* *---------------------------------------------------------------------- * * ParseComment -- * * Scans up to numBytes bytes starting at src, consuming a * Tcl comment as defined by Tcl's parsing rules. * * Results: * Records in parsePtr information about the parse. Returns the * number of bytes consumed. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int ParseComment(src, numBytes, parsePtr) CONST char *src; /* First character to parse. */ register int numBytes; /* Max number of bytes to scan. */ Tcl_Parse *parsePtr; /* Information about parse in progress. * Updated if parsing indicates * an incomplete command. */ { register CONST char *p = src; while (numBytes) { char type; int scanned; do { scanned = TclParseWhiteSpace(p, numBytes, parsePtr, &type); p += scanned; numBytes -= scanned; } while (numBytes && (*p == '\n') && (p++,numBytes--)); if ((numBytes == 0) || (*p != '#')) { break; } if (parsePtr->commentStart == NULL) { parsePtr->commentStart = p; } while (numBytes) { if (*p == '\\') { scanned = TclParseWhiteSpace(p, numBytes, parsePtr, &type); if (scanned) { p += scanned; numBytes -= scanned; } else { /* * General backslash substitution in comments isn't * part of the formal spec, but test parse-15.47 * and history indicate that it has been the de facto * rule. Don't change it now. */ TclParseBackslash(p, numBytes, &scanned, NULL); p += scanned; numBytes -= scanned; } } else { p++; numBytes--; if (p[-1] == '\n') { break; } } } parsePtr->commentSize = p - parsePtr->commentStart; } return (p - src); } /* *---------------------------------------------------------------------- * * ParseTokens -- * * This procedure forms the heart of the Tcl parser. It parses one * or more tokens from a string, up to a termination point * specified by the caller. This procedure is used to parse * unquoted command words (those not in quotes or braces), words in * quotes, and array indices for variables. No more than numBytes * bytes will be scanned. * * Results: * Tokens are added to parsePtr and parsePtr->term is filled in * with the address of the character that terminated the parse (the * first one whose CHAR_TYPE matched mask or the character at * parsePtr->end). The return value is TCL_OK if the parse * completed successfully and TCL_ERROR otherwise. If a parse * error occurs and parsePtr->interp isn't NULL, then an error * message is left in the interpreter's result. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int ParseTokens(src, numBytes, mask, parsePtr) register CONST char *src; /* First character to parse. */ register int numBytes; /* Max number of bytes to scan. */ int mask; /* Specifies when to stop parsing. The * parse stops at the first unquoted * character whose CHAR_TYPE contains * any of the bits in mask. */ Tcl_Parse *parsePtr; /* Information about parse in progress. * Updated with additional tokens and * termination information. */ { char type; int originalTokens, varToken; Tcl_Token *tokenPtr; Tcl_Parse nested; /* * Each iteration through the following loop adds one token of * type TCL_TOKEN_TEXT, TCL_TOKEN_BS, TCL_TOKEN_COMMAND, or * TCL_TOKEN_VARIABLE to parsePtr. For TCL_TOKEN_VARIABLE tokens, * additional tokens are added for the parsed variable name. */ originalTokens = parsePtr->numTokens; while (numBytes && !((type = CHAR_TYPE(*src)) & mask)) { if (parsePtr->numTokens == parsePtr->tokensAvailable) { TclExpandTokenArray(parsePtr); } tokenPtr = &parsePtr->tokenPtr[parsePtr->numTokens]; tokenPtr->start = src; tokenPtr->numComponents = 0; if ((type & TYPE_SUBS) == 0) { /* * This is a simple range of characters. Scan to find the end * of the range. */ while ((++src, --numBytes) && !(CHAR_TYPE(*src) & (mask | TYPE_SUBS))) { /* empty loop */ } tokenPtr->type = TCL_TOKEN_TEXT; tokenPtr->size = src - tokenPtr->start; parsePtr->numTokens++; } else if (*src == '$') { /* * This is a variable reference. Call Tcl_ParseVarName to do * all the dirty work of parsing the name. */ varToken = parsePtr->numTokens; if (Tcl_ParseVarName(parsePtr->interp, src, numBytes, parsePtr, 1) != TCL_OK) { return TCL_ERROR; } src += parsePtr->tokenPtr[varToken].size; numBytes -= parsePtr->tokenPtr[varToken].size; } else if (*src == '[') { /* * Command substitution. Call Tcl_ParseCommand recursively * (and repeatedly) to parse the nested command(s), then * throw away the parse information. */ src++; numBytes--; while (1) { if (Tcl_ParseCommand(parsePtr->interp, src, numBytes, 1, &nested) != TCL_OK) { parsePtr->errorType = nested.errorType; parsePtr->term = nested.term; parsePtr->incomplete = nested.incomplete; return TCL_ERROR; } src = nested.commandStart + nested.commandSize; numBytes = parsePtr->end - src; /* * This is equivalent to Tcl_FreeParse(&nested), but * presumably inlined here for sake of runtime optimization */ if (nested.tokenPtr != nested.staticTokens) { ckfree((char *) nested.tokenPtr); } /* * Check for the closing ']' that ends the command * substitution. It must have been the last character of * the parsed command. */ if ((nested.term < parsePtr->end) && (*nested.term == ']') && !nested.incomplete) { break; } if (numBytes == 0) { if (parsePtr->interp != NULL) { Tcl_SetResult(parsePtr->interp, "missing close-bracket", TCL_STATIC); } parsePtr->errorType = TCL_PARSE_MISSING_BRACKET; parsePtr->term = tokenPtr->start; parsePtr->incomplete = 1; return TCL_ERROR; } } tokenPtr->type = TCL_TOKEN_COMMAND; tokenPtr->size = src - tokenPtr->start; parsePtr->numTokens++; } else if (*src == '\\') { /* * Backslash substitution. */ TclParseBackslash(src, numBytes, &tokenPtr->size, NULL); if (tokenPtr->size == 1) { /* Just a backslash, due to end of string */ tokenPtr->type = TCL_TOKEN_TEXT; parsePtr->numTokens++; src++; numBytes--; continue; } if (src[1] == '\n') { if (numBytes == 2) { parsePtr->incomplete = 1; } /* * Note: backslash-newline is special in that it is * treated the same as a space character would be. This * means that it could terminate the token. */ if (mask & TYPE_SPACE) { if (parsePtr->numTokens == originalTokens) { goto finishToken; } break; } } tokenPtr->type = TCL_TOKEN_BS; parsePtr->numTokens++; src += tokenPtr->size; numBytes -= tokenPtr->size; } else if (*src == 0) { tokenPtr->type = TCL_TOKEN_TEXT; tokenPtr->size = 1; parsePtr->numTokens++; src++; numBytes--; } else { panic("ParseTokens encountered unknown character"); } } if (parsePtr->numTokens == originalTokens) { /* * There was nothing in this range of text. Add an empty token * for the empty range, so that there is always at least one * token added. */ if (parsePtr->numTokens == parsePtr->tokensAvailable) { TclExpandTokenArray(parsePtr); } tokenPtr = &parsePtr->tokenPtr[parsePtr->numTokens]; tokenPtr->start = src; tokenPtr->numComponents = 0; finishToken: tokenPtr->type = TCL_TOKEN_TEXT; tokenPtr->size = 0; parsePtr->numTokens++; } parsePtr->term = src; return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_FreeParse -- * * This procedure is invoked to free any dynamic storage that may * have been allocated by a previous call to Tcl_ParseCommand. * * Results: * None. * * Side effects: * If there is any dynamically allocated memory in *parsePtr, * it is freed. * *---------------------------------------------------------------------- */ void Tcl_FreeParse(parsePtr) Tcl_Parse *parsePtr; /* Structure that was filled in by a * previous call to Tcl_ParseCommand. */ { if (parsePtr->tokenPtr != parsePtr->staticTokens) { ckfree((char *) parsePtr->tokenPtr); parsePtr->tokenPtr = parsePtr->staticTokens; } } /* *---------------------------------------------------------------------- * * TclExpandTokenArray -- * * This procedure is invoked when the current space for tokens in * a Tcl_Parse structure fills up; it allocates memory to grow the * token array * * Results: * None. * * Side effects: * Memory is allocated for a new larger token array; the memory * for the old array is freed, if it had been dynamically allocated. * *---------------------------------------------------------------------- */ void TclExpandTokenArray(parsePtr) Tcl_Parse *parsePtr; /* Parse structure whose token space * has overflowed. */ { int newCount; Tcl_Token *newPtr; #define MAX_TOKENS (int)(UINT_MAX / sizeof(Tcl_Token)) if (parsePtr->tokensAvailable == MAX_TOKENS) { Tcl_Panic("max # of tokens for a Tcl parse (%d) exceeded", MAX_TOKENS); } newCount = parsePtr->tokensAvailable*2; if (newCount > MAX_TOKENS) { newCount = MAX_TOKENS; } newPtr = (Tcl_Token *) ckalloc((unsigned) (newCount * sizeof(Tcl_Token))); memcpy((VOID *) newPtr, (VOID *) parsePtr->tokenPtr, (size_t) (parsePtr->tokensAvailable * sizeof(Tcl_Token))); if (parsePtr->tokenPtr != parsePtr->staticTokens) { ckfree((char *) parsePtr->tokenPtr); } parsePtr->tokenPtr = newPtr; parsePtr->tokensAvailable = newCount; } /* *---------------------------------------------------------------------- * * Tcl_ParseVarName -- * * Given a string starting with a $ sign, parse off a variable * name and return information about the parse. No more than * numBytes bytes will be scanned. * * Results: * The return value is TCL_OK if the command was parsed * successfully and TCL_ERROR otherwise. If an error occurs and * interp isn't NULL then an error message is left in its result. * On a successful return, tokenPtr and numTokens fields of * parsePtr are filled in with information about the variable name * that was parsed. The "size" field of the first new token gives * the total number of bytes in the variable name. Other fields in * parsePtr are undefined. * * Side effects: * If there is insufficient space in parsePtr to hold all the * information about the command, then additional space is * malloc-ed. If the procedure returns TCL_OK then the caller must * eventually invoke Tcl_FreeParse to release any additional space * that was allocated. * *---------------------------------------------------------------------- */ int Tcl_ParseVarName(interp, string, numBytes, parsePtr, append) Tcl_Interp *interp; /* Interpreter to use for error reporting; * if NULL, then no error message is * provided. */ CONST char *string; /* String containing variable name. First * character must be "$". */ register int numBytes; /* Total number of bytes in string. If < 0, * the string consists of all bytes up to the * first null character. */ Tcl_Parse *parsePtr; /* Structure to fill in with information * about the variable name. */ int append; /* Non-zero means append tokens to existing * information in parsePtr; zero means ignore * existing tokens in parsePtr and reinitialize * it. */ { Tcl_Token *tokenPtr; register CONST char *src; unsigned char c; int varIndex, offset; Tcl_UniChar ch; unsigned array; if ((numBytes == 0) || (string == NULL)) { return TCL_ERROR; } if (numBytes < 0) { numBytes = strlen(string); } if (!append) { parsePtr->numWords = 0; parsePtr->tokenPtr = parsePtr->staticTokens; parsePtr->numTokens = 0; parsePtr->tokensAvailable = NUM_STATIC_TOKENS; parsePtr->string = string; parsePtr->end = (string + numBytes); parsePtr->interp = interp; parsePtr->errorType = TCL_PARSE_SUCCESS; parsePtr->incomplete = 0; } /* * Generate one token for the variable, an additional token for the * name, plus any number of additional tokens for the index, if * there is one. */ src = string; if ((parsePtr->numTokens + 2) > parsePtr->tokensAvailable) { TclExpandTokenArray(parsePtr); } tokenPtr = &parsePtr->tokenPtr[parsePtr->numTokens]; tokenPtr->type = TCL_TOKEN_VARIABLE; tokenPtr->start = src; varIndex = parsePtr->numTokens; parsePtr->numTokens++; tokenPtr++; src++; numBytes--; if (numBytes == 0) { goto justADollarSign; } tokenPtr->type = TCL_TOKEN_TEXT; tokenPtr->start = src; tokenPtr->numComponents = 0; /* * The name of the variable can have three forms: * 1. The $ sign is followed by an open curly brace. Then * the variable name is everything up to the next close * curly brace, and the variable is a scalar variable. * 2. The $ sign is not followed by an open curly brace. Then * the variable name is everything up to the next * character that isn't a letter, digit, or underscore. * :: sequences are also considered part of the variable * name, in order to support namespaces. If the following * character is an open parenthesis, then the information * between parentheses is the array element name. * 3. The $ sign is followed by something that isn't a letter, * digit, or underscore: in this case, there is no variable * name and the token is just "$". */ if (*src == '{') { src++; numBytes--; tokenPtr->type = TCL_TOKEN_TEXT; tokenPtr->start = src; tokenPtr->numComponents = 0; while (numBytes && (*src != '}')) { numBytes--; src++; } if (numBytes == 0) { if (parsePtr->interp != NULL) { Tcl_SetResult(parsePtr->interp, "missing close-brace for variable name", TCL_STATIC); } parsePtr->errorType = TCL_PARSE_MISSING_VAR_BRACE; parsePtr->term = tokenPtr->start-1; parsePtr->incomplete = 1; goto error; } tokenPtr->size = src - tokenPtr->start; tokenPtr[-1].size = src - tokenPtr[-1].start; parsePtr->numTokens++; src++; } else { tokenPtr->type = TCL_TOKEN_TEXT; tokenPtr->start = src; tokenPtr->numComponents = 0; while (numBytes) { if (Tcl_UtfCharComplete(src, numBytes)) { offset = Tcl_UtfToUniChar(src, &ch); } else { char utfBytes[TCL_UTF_MAX]; memcpy(utfBytes, src, (size_t) numBytes); utfBytes[numBytes] = '\0'; offset = Tcl_UtfToUniChar(utfBytes, &ch); } c = UCHAR(ch); if (isalnum(c) || (c == '_')) { /* INTL: ISO only, UCHAR. */ src += offset; numBytes -= offset; continue; } if ((c == ':') && (numBytes != 1) && (src[1] == ':')) { src += 2; numBytes -= 2; while (numBytes && (*src == ':')) { src++; numBytes--; } continue; } break; } /* * Support for empty array names here. */ array = (numBytes && (*src == '(')); tokenPtr->size = src - tokenPtr->start; if ((tokenPtr->size == 0) && !array) { goto justADollarSign; } parsePtr->numTokens++; if (array) { /* * This is a reference to an array element. Call * ParseTokens recursively to parse the element name, * since it could contain any number of substitutions. */ if (ParseTokens(src+1, numBytes-1, TYPE_CLOSE_PAREN, parsePtr) != TCL_OK) { goto error; } if ((parsePtr->term == (src + numBytes)) || (*parsePtr->term != ')')) { if (parsePtr->interp != NULL) { Tcl_SetResult(parsePtr->interp, "missing )", TCL_STATIC); } parsePtr->errorType = TCL_PARSE_MISSING_PAREN; parsePtr->term = src; parsePtr->incomplete = 1; goto error; } src = parsePtr->term + 1; } } tokenPtr = &parsePtr->tokenPtr[varIndex]; tokenPtr->size = src - tokenPtr->start; tokenPtr->numComponents = parsePtr->numTokens - (varIndex + 1); return TCL_OK; /* * The dollar sign isn't followed by a variable name. * replace the TCL_TOKEN_VARIABLE token with a * TCL_TOKEN_TEXT token for the dollar sign. */ justADollarSign: tokenPtr = &parsePtr->tokenPtr[varIndex]; tokenPtr->type = TCL_TOKEN_TEXT; tokenPtr->size = 1; tokenPtr->numComponents = 0; return TCL_OK; error: Tcl_FreeParse(parsePtr); return TCL_ERROR; } /* *---------------------------------------------------------------------- * * Tcl_ParseVar -- * * Given a string starting with a $ sign, parse off a variable * name and return its value. * * Results: * The return value is the contents of the variable given by * the leading characters of string. If termPtr isn't NULL, * *termPtr gets filled in with the address of the character * just after the last one in the variable specifier. If the * variable doesn't exist, then the return value is NULL and * an error message will be left in interp's result. * * Side effects: * None. * *---------------------------------------------------------------------- */ CONST char * Tcl_ParseVar(interp, string, termPtr) Tcl_Interp *interp; /* Context for looking up variable. */ register CONST char *string; /* String containing variable name. * First character must be "$". */ CONST char **termPtr; /* If non-NULL, points to word to fill * in with character just after last * one in the variable specifier. */ { Tcl_Parse parse; register Tcl_Obj *objPtr; int code; if (Tcl_ParseVarName(interp, string, -1, &parse, 0) != TCL_OK) { return NULL; } if (termPtr != NULL) { *termPtr = string + parse.tokenPtr->size; } if (parse.numTokens == 1) { /* * There isn't a variable name after all: the $ is just a $. */ return "$"; } code = Tcl_EvalTokensStandard(interp, parse.tokenPtr, parse.numTokens); if (code != TCL_OK) { return NULL; } objPtr = Tcl_GetObjResult(interp); /* * At this point we should have an object containing the value of * a variable. Just return the string from that object. * * This should have returned the object for the user to manage, but * instead we have some weak reference to the string value in the * object, which is why we make sure the object exists after resetting * the result. This isn't ideal, but it's the best we can do with the * current documented interface. -- hobbs */ if (!Tcl_IsShared(objPtr)) { Tcl_IncrRefCount(objPtr); } Tcl_ResetResult(interp); return TclGetString(objPtr); } /* *---------------------------------------------------------------------- * * Tcl_ParseBraces -- * * Given a string in braces such as a Tcl command argument or a string * value in a Tcl expression, this procedure parses the string and * returns information about the parse. No more than numBytes bytes * will be scanned. * * Results: * The return value is TCL_OK if the string was parsed successfully and * TCL_ERROR otherwise. If an error occurs and interp isn't NULL then * an error message is left in its result. On a successful return, * tokenPtr and numTokens fields of parsePtr are filled in with * information about the string that was parsed. Other fields in * parsePtr are undefined. termPtr is set to point to the character * just after the last one in the braced string. * * Side effects: * If there is insufficient space in parsePtr to hold all the * information about the command, then additional space is * malloc-ed. If the procedure returns TCL_OK then the caller must * eventually invoke Tcl_FreeParse to release any additional space * that was allocated. * *---------------------------------------------------------------------- */ int Tcl_ParseBraces(interp, string, numBytes, parsePtr, append, termPtr) Tcl_Interp *interp; /* Interpreter to use for error reporting; * if NULL, then no error message is * provided. */ CONST char *string; /* String containing the string in braces. * The first character must be '{'. */ register int numBytes; /* Total number of bytes in string. If < 0, * the string consists of all bytes up to * the first null character. */ register Tcl_Parse *parsePtr; /* Structure to fill in with information * about the string. */ int append; /* Non-zero means append tokens to existing * information in parsePtr; zero means * ignore existing tokens in parsePtr and * reinitialize it. */ CONST char **termPtr; /* If non-NULL, points to word in which to * store a pointer to the character just * after the terminating '}' if the parse * was successful. */ { Tcl_Token *tokenPtr; register CONST char *src; int startIndex, level, length; if ((numBytes == 0) || (string == NULL)) { return TCL_ERROR; } if (numBytes < 0) { numBytes = strlen(string); } if (!append) { parsePtr->numWords = 0; parsePtr->tokenPtr = parsePtr->staticTokens; parsePtr->numTokens = 0; parsePtr->tokensAvailable = NUM_STATIC_TOKENS; parsePtr->string = string; parsePtr->end = (string + numBytes); parsePtr->interp = interp; parsePtr->errorType = TCL_PARSE_SUCCESS; } src = string; startIndex = parsePtr->numTokens; if (parsePtr->numTokens == parsePtr->tokensAvailable) { TclExpandTokenArray(parsePtr); } tokenPtr = &parsePtr->tokenPtr[startIndex]; tokenPtr->type = TCL_TOKEN_TEXT; tokenPtr->start = src+1; tokenPtr->numComponents = 0; level = 1; while (1) { while (++src, --numBytes) { if (CHAR_TYPE(*src) != TYPE_NORMAL) { break; } } if (numBytes == 0) { register int openBrace = 0; parsePtr->errorType = TCL_PARSE_MISSING_BRACE; parsePtr->term = string; parsePtr->incomplete = 1; if (parsePtr->interp == NULL) { /* * Skip straight to the exit code since we have no * interpreter to put error message in. */ goto error; } Tcl_SetResult(parsePtr->interp, "missing close-brace", TCL_STATIC); /* * Guess if the problem is due to comments by searching * the source string for a possible open brace within the * context of a comment. Since we aren't performing a * full Tcl parse, just look for an open brace preceded * by a '#' on the same line. */ while (--src > string) { switch (*src) { case '{': openBrace = 1; break; case '\n': openBrace = 0; break; case '#' : if (openBrace && (isspace(UCHAR(src[-1])))) { Tcl_AppendResult(parsePtr->interp, ": possible unbalanced brace in comment", (char *) NULL); goto error; } break; } } error: Tcl_FreeParse(parsePtr); return TCL_ERROR; } switch (*src) { case '{': level++; break; case '}': if (--level == 0) { /* * Decide if we need to finish emitting a * partially-finished token. There are 3 cases: * {abc \newline xyz} or {xyz} * - finish emitting "xyz" token * {abc \newline} * - don't emit token after \newline * {} - finish emitting zero-sized token * * The last case ensures that there is a token * (even if empty) that describes the braced string. */ if ((src != tokenPtr->start) || (parsePtr->numTokens == startIndex)) { tokenPtr->size = (src - tokenPtr->start); parsePtr->numTokens++; } if (termPtr != NULL) { *termPtr = src+1; } return TCL_OK; } break; case '\\': TclParseBackslash(src, numBytes, &length, NULL); if ((length > 1) && (src[1] == '\n')) { /* * A backslash-newline sequence must be collapsed, even * inside braces, so we have to split the word into * multiple tokens so that the backslash-newline can be * represented explicitly. */ if (numBytes == 2) { parsePtr->incomplete = 1; } tokenPtr->size = (src - tokenPtr->start); if (tokenPtr->size != 0) { parsePtr->numTokens++; } if ((parsePtr->numTokens+1) >= parsePtr->tokensAvailable) { TclExpandTokenArray(parsePtr); } tokenPtr = &parsePtr->tokenPtr[parsePtr->numTokens]; tokenPtr->type = TCL_TOKEN_BS; tokenPtr->start = src; tokenPtr->size = length; tokenPtr->numComponents = 0; parsePtr->numTokens++; src += length - 1; numBytes -= length - 1; tokenPtr++; tokenPtr->type = TCL_TOKEN_TEXT; tokenPtr->start = src + 1; tokenPtr->numComponents = 0; } else { src += length - 1; numBytes -= length - 1; } break; } } } /* *---------------------------------------------------------------------- * * Tcl_ParseQuotedString -- * * Given a double-quoted string such as a quoted Tcl command argument * or a quoted value in a Tcl expression, this procedure parses the * string and returns information about the parse. No more than * numBytes bytes will be scanned. * * Results: * The return value is TCL_OK if the string was parsed successfully and * TCL_ERROR otherwise. If an error occurs and interp isn't NULL then * an error message is left in its result. On a successful return, * tokenPtr and numTokens fields of parsePtr are filled in with * information about the string that was parsed. Other fields in * parsePtr are undefined. termPtr is set to point to the character * just after the quoted string's terminating close-quote. * * Side effects: * If there is insufficient space in parsePtr to hold all the * information about the command, then additional space is * malloc-ed. If the procedure returns TCL_OK then the caller must * eventually invoke Tcl_FreeParse to release any additional space * that was allocated. * *---------------------------------------------------------------------- */ int Tcl_ParseQuotedString(interp, string, numBytes, parsePtr, append, termPtr) Tcl_Interp *interp; /* Interpreter to use for error reporting; * if NULL, then no error message is * provided. */ CONST char *string; /* String containing the quoted string. * The first character must be '"'. */ register int numBytes; /* Total number of bytes in string. If < 0, * the string consists of all bytes up to * the first null character. */ register Tcl_Parse *parsePtr; /* Structure to fill in with information * about the string. */ int append; /* Non-zero means append tokens to existing * information in parsePtr; zero means * ignore existing tokens in parsePtr and * reinitialize it. */ CONST char **termPtr; /* If non-NULL, points to word in which to * store a pointer to the character just * after the quoted string's terminating * close-quote if the parse succeeds. */ { if ((numBytes == 0) || (string == NULL)) { return TCL_ERROR; } if (numBytes < 0) { numBytes = strlen(string); } if (!append) { parsePtr->numWords = 0; parsePtr->tokenPtr = parsePtr->staticTokens; parsePtr->numTokens = 0; parsePtr->tokensAvailable = NUM_STATIC_TOKENS; parsePtr->string = string; parsePtr->end = (string + numBytes); parsePtr->interp = interp; parsePtr->errorType = TCL_PARSE_SUCCESS; } if (ParseTokens(string+1, numBytes-1, TYPE_QUOTE, parsePtr) != TCL_OK) { goto error; } if (*parsePtr->term != '"') { if (parsePtr->interp != NULL) { Tcl_SetResult(parsePtr->interp, "missing \"", TCL_STATIC); } parsePtr->errorType = TCL_PARSE_MISSING_QUOTE; parsePtr->term = string; parsePtr->incomplete = 1; goto error; } if (termPtr != NULL) { *termPtr = (parsePtr->term + 1); } return TCL_OK; error: Tcl_FreeParse(parsePtr); return TCL_ERROR; } /* *---------------------------------------------------------------------- * * CommandComplete -- * * This procedure is shared by TclCommandComplete and * Tcl_ObjCommandcoComplete; it does all the real work of seeing * whether a script is complete * * Results: * 1 is returned if the script is complete, 0 if there are open * delimiters such as " or (. 1 is also returned if there is a * parse error in the script other than unmatched delimiters. * * Side effects: * None. * *---------------------------------------------------------------------- */ static int CommandComplete(script, numBytes) CONST char *script; /* Script to check. */ int numBytes; /* Number of bytes in script. */ { Tcl_Parse parse; CONST char *p, *end; int result; p = script; end = p + numBytes; while (Tcl_ParseCommand((Tcl_Interp *) NULL, p, end - p, 0, &parse) == TCL_OK) { p = parse.commandStart + parse.commandSize; if (p >= end) { break; } Tcl_FreeParse(&parse); } if (parse.incomplete) { result = 0; } else { result = 1; } Tcl_FreeParse(&parse); return result; } /* *---------------------------------------------------------------------- * * Tcl_CommandComplete -- * * Given a partial or complete Tcl script, this procedure * determines whether the script is complete in the sense * of having matched braces and quotes and brackets. * * Results: * 1 is returned if the script is complete, 0 otherwise. * 1 is also returned if there is a parse error in the script * other than unmatched delimiters. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_CommandComplete(script) CONST char *script; /* Script to check. */ { return CommandComplete(script, (int) strlen(script)); } /* *---------------------------------------------------------------------- * * TclObjCommandComplete -- * * Given a partial or complete Tcl command in a Tcl object, this * procedure determines whether the command is complete in the sense of * having matched braces and quotes and brackets. * * Results: * 1 is returned if the command is complete, 0 otherwise. * * Side effects: * None. * *---------------------------------------------------------------------- */ int TclObjCommandComplete(objPtr) Tcl_Obj *objPtr; /* Points to object holding script * to check. */ { CONST char *script; int length; script = Tcl_GetStringFromObj(objPtr, &length); return CommandComplete(script, length); } /* *---------------------------------------------------------------------- * * TclIsLocalScalar -- * * Check to see if a given string is a legal scalar variable * name with no namespace qualifiers or substitutions. * * Results: * Returns 1 if the variable is a local scalar. * * Side effects: * None. * *---------------------------------------------------------------------- */ int TclIsLocalScalar(src, len) CONST char *src; int len; { CONST char *p; CONST char *lastChar = src + (len - 1); for (p = src; p <= lastChar; p++) { if ((CHAR_TYPE(*p) != TYPE_NORMAL) && (CHAR_TYPE(*p) != TYPE_COMMAND_END)) { /* * TCL_COMMAND_END is returned for the last character * of the string. By this point we know it isn't * an array or namespace reference. */ return 0; } if (*p == '(') { if (*lastChar == ')') { /* we have an array element */ return 0; } } else if (*p == ':') { if ((p != lastChar) && *(p+1) == ':') { /* qualified name */ return 0; } } } return 1; }