/* * tclPathObj.c -- * * This file contains the implementation of Tcl's "path" object type used * to represent and manipulate a general (virtual) filesystem entity in * an efficient manner. * * Copyright (c) 2003 Vince Darley. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. * * RCS: @(#) $Id: tclPathObj.c,v 1.66.2.7 2009/03/27 19:16:49 dgp Exp $ */ #include "tclInt.h" #include "tclFileSystem.h" /* * Prototypes for functions defined later in this file. */ static void DupFsPathInternalRep(Tcl_Obj *srcPtr, Tcl_Obj *copyPtr); static void FreeFsPathInternalRep(Tcl_Obj *pathPtr); static void UpdateStringOfFsPath(Tcl_Obj *pathPtr); static int SetFsPathFromAny(Tcl_Interp *interp, Tcl_Obj *pathPtr); static int FindSplitPos(const char *path, int separator); static int IsSeparatorOrNull(int ch); static Tcl_Obj * GetExtension(Tcl_Obj *pathPtr); /* * Define the 'path' object type, which Tcl uses to represent file paths * internally. */ static Tcl_ObjType tclFsPathType = { "path", /* name */ FreeFsPathInternalRep, /* freeIntRepProc */ DupFsPathInternalRep, /* dupIntRepProc */ UpdateStringOfFsPath, /* updateStringProc */ SetFsPathFromAny /* setFromAnyProc */ }; /* * struct FsPath -- * * Internal representation of a Tcl_Obj of "path" type. This can be used to * represent relative or absolute paths, and has certain optimisations when * used to represent paths which are already normalized and absolute. * * Note that both 'translatedPathPtr' and 'normPathPtr' can be a circular * reference to the container Tcl_Obj of this FsPath. * * There are two cases, with the first being the most common: * * (i) flags == 0, => Ordinary path. * * translatedPathPtr contains the translated path (which may be a circular * reference to the object itself). If it is NULL then the path is pure * normalized (and the normPathPtr will be a circular reference). cwdPtr is * null for an absolute path, and non-null for a relative path (unless the cwd * has never been set, in which case the cwdPtr may also be null for a * relative path). * * (ii) flags != 0, => Special path, see TclNewFSPathObj * * Now, this is a path like 'file join $dir $tail' where, cwdPtr is the $dir * and normPathPtr is the $tail. * */ typedef struct FsPath { Tcl_Obj *translatedPathPtr; /* Name without any ~user sequences. If this * is NULL, then this is a pure normalized, * absolute path object, in which the parent * Tcl_Obj's string rep is already both * translated and normalized. */ Tcl_Obj *normPathPtr; /* Normalized absolute path, without ., .. or * ~user sequences. If the Tcl_Obj containing * this FsPath is already normalized, this may * be a circular reference back to the * container. If that is NOT the case, we have * a refCount on the object. */ Tcl_Obj *cwdPtr; /* If null, path is absolute, else this points * to the cwd object used for this path. We * have a refCount on the object. */ int flags; /* Flags to describe interpretation - see * below. */ ClientData nativePathPtr; /* Native representation of this path, which * is filesystem dependent. */ int filesystemEpoch; /* Used to ensure the path representation was * generated during the correct filesystem * epoch. The epoch changes when * filesystem-mounts are changed. */ struct FilesystemRecord *fsRecPtr; /* Pointer to the filesystem record entry to * use for this path. */ } FsPath; /* * Flag values for FsPath->flags. */ #define TCLPATH_APPENDED 1 #define TCLPATH_NEEDNORM 4 /* * Define some macros to give us convenient access to path-object specific * fields. */ #define PATHOBJ(pathPtr) ((FsPath *) (pathPtr)->internalRep.otherValuePtr) #define SETPATHOBJ(pathPtr,fsPathPtr) \ ((pathPtr)->internalRep.otherValuePtr = (VOID *) (fsPathPtr)) #define PATHFLAGS(pathPtr) (PATHOBJ(pathPtr)->flags) /* *--------------------------------------------------------------------------- * * TclFSNormalizeAbsolutePath -- * * Takes an absolute path specification and computes a 'normalized' path * from it. * * A normalized path is one which has all '../', './' removed. Also it is * one which is in the 'standard' format for the native platform. On * Unix, this means the path must be free of symbolic links/aliases, and * on Windows it means we want the long form, with that long form's * case-dependence (which gives us a unique, case-dependent path). * * The behaviour of this function if passed a non-absolute path is NOT * defined. * * pathPtr may have a refCount of zero, or may be a shared object. * * Results: * The result is returned in a Tcl_Obj with a refCount of 1, which is * therefore owned by the caller. It must be freed (with * Tcl_DecrRefCount) by the caller when no longer needed. * * Side effects: * None (beyond the memory allocation for the result). * * Special note: * This code was originally based on code from Matt Newman and * Jean-Claude Wippler, but has since been totally rewritten by Vince * Darley to deal with symbolic links. * *--------------------------------------------------------------------------- */ Tcl_Obj * TclFSNormalizeAbsolutePath( Tcl_Interp *interp, /* Interpreter to use */ Tcl_Obj *pathPtr, /* Absolute path to normalize */ ClientData *clientDataPtr) /* If non-NULL, then may be set to the * fs-specific clientData for this path. This * will happen when that extra information can * be calculated efficiently as a side-effect * of normalization. */ { ClientData clientData = NULL; const char *dirSep, *oldDirSep; int first = 1; /* Set to zero once we've passed the first * directory separator - we can't use '..' to * remove the volume in a path. */ Tcl_Obj *retVal = NULL; dirSep = TclGetString(pathPtr); if (tclPlatform == TCL_PLATFORM_WINDOWS) { if ( (dirSep[0] == '/' || dirSep[0] == '\\') && (dirSep[1] == '/' || dirSep[1] == '\\') && (dirSep[2] == '?') && (dirSep[3] == '/' || dirSep[3] == '\\')) { /* NT extended path */ dirSep += 4; if ( (dirSep[0] == 'U' || dirSep[0] == 'u') && (dirSep[1] == 'N' || dirSep[1] == 'n') && (dirSep[2] == 'C' || dirSep[2] == 'c') && (dirSep[3] == '/' || dirSep[3] == '\\')) { /* NT extended UNC path */ dirSep += 4; } } if (dirSep[0] != 0 && dirSep[1] == ':' && (dirSep[2] == '/' || dirSep[2] == '\\')) { /* Do nothing */ } else if ((dirSep[0] == '/' || dirSep[0] == '\\') && (dirSep[1] == '/' || dirSep[1] == '\\')) { /* * UNC style path, where we must skip over the first separator, * since the first two segments are actually inseparable. */ dirSep += 2; dirSep += FindSplitPos(dirSep, '/'); if (*dirSep != 0) { dirSep++; } } } /* * Scan forward from one directory separator to the next, checking for * '..' and '.' sequences which must be handled specially. In particular * handling of '..' can be complicated if the directory before is a link, * since we will have to expand the link to be able to back up one level. */ while (*dirSep != 0) { oldDirSep = dirSep; if (!first) { dirSep++; } dirSep += FindSplitPos(dirSep, '/'); if (dirSep[0] == 0 || dirSep[1] == 0) { if (retVal != NULL) { Tcl_AppendToObj(retVal, oldDirSep, dirSep - oldDirSep); } break; } if (dirSep[1] == '.') { if (retVal != NULL) { Tcl_AppendToObj(retVal, oldDirSep, dirSep - oldDirSep); oldDirSep = dirSep; } again: if (IsSeparatorOrNull(dirSep[2])) { /* * Need to skip '.' in the path. */ int curLen; if (retVal == NULL) { const char *path = TclGetString(pathPtr); retVal = Tcl_NewStringObj(path, dirSep - path); Tcl_IncrRefCount(retVal); } Tcl_GetStringFromObj(retVal, &curLen); if (curLen == 0) { Tcl_AppendToObj(retVal, dirSep, 1); } dirSep += 2; oldDirSep = dirSep; if (dirSep[0] != 0 && dirSep[1] == '.') { goto again; } continue; } if (dirSep[2] == '.' && IsSeparatorOrNull(dirSep[3])) { Tcl_Obj *link; int curLen; char *linkStr; /* * Have '..' so need to skip previous directory. */ if (retVal == NULL) { const char *path = TclGetString(pathPtr); retVal = Tcl_NewStringObj(path, dirSep - path); Tcl_IncrRefCount(retVal); } Tcl_GetStringFromObj(retVal, &curLen); if (curLen == 0) { Tcl_AppendToObj(retVal, dirSep, 1); } if (!first || (tclPlatform == TCL_PLATFORM_UNIX)) { link = Tcl_FSLink(retVal, NULL, 0); if (link != NULL) { /* * Got a link. Need to check if the link is relative * or absolute, for those platforms where relative * links exist. */ if (tclPlatform != TCL_PLATFORM_WINDOWS && Tcl_FSGetPathType(link) == TCL_PATH_RELATIVE) { /* * We need to follow this link which is relative * to retVal's directory. This means concatenating * the link onto the directory of the path so far. */ const char *path = Tcl_GetStringFromObj(retVal, &curLen); while (--curLen >= 0) { if (IsSeparatorOrNull(path[curLen])) { break; } } if (Tcl_IsShared(retVal)) { TclDecrRefCount(retVal); retVal = Tcl_DuplicateObj(retVal); Tcl_IncrRefCount(retVal); } /* * We want the trailing slash. */ Tcl_SetObjLength(retVal, curLen+1); Tcl_AppendObjToObj(retVal, link); TclDecrRefCount(link); linkStr = Tcl_GetStringFromObj(retVal, &curLen); } else { /* * Absolute link. */ TclDecrRefCount(retVal); retVal = link; linkStr = Tcl_GetStringFromObj(retVal, &curLen); /* * Convert to forward-slashes on windows. */ if (tclPlatform == TCL_PLATFORM_WINDOWS) { int i; for (i = 0; i < curLen; i++) { if (linkStr[i] == '\\') { linkStr[i] = '/'; } } } } } else { linkStr = Tcl_GetStringFromObj(retVal, &curLen); } /* * Either way, we now remove the last path element. * (but not the first character of the path) */ while (--curLen >= 0) { if (IsSeparatorOrNull(linkStr[curLen])) { if (curLen) { Tcl_SetObjLength(retVal, curLen); } else { Tcl_SetObjLength(retVal, 1); } break; } } } dirSep += 3; oldDirSep = dirSep; if ((curLen == 0) && (dirSep[0] != 0)) { Tcl_SetObjLength(retVal, 0); } if (dirSep[0] != 0 && dirSep[1] == '.') { goto again; } continue; } } first = 0; if (retVal != NULL) { Tcl_AppendToObj(retVal, oldDirSep, dirSep - oldDirSep); } } /* * If we didn't make any changes, just use the input path. */ if (retVal == NULL) { retVal = pathPtr; Tcl_IncrRefCount(retVal); if (Tcl_IsShared(retVal)) { /* * Unfortunately, the platform-specific normalization code which * will be called below has no way of dealing with the case where * an object is shared. It is expecting to modify an object in * place. So, we must duplicate this here to ensure an object with * a single ref-count. * * If that changes in the future (e.g. the normalize proc is given * one object and is able to return a different one), then we * could remove this code. */ TclDecrRefCount(retVal); retVal = Tcl_DuplicateObj(pathPtr); Tcl_IncrRefCount(retVal); } } /* * Ensure a windows drive like C:/ has a trailing separator */ if (tclPlatform == TCL_PLATFORM_WINDOWS) { int len; const char *path = Tcl_GetStringFromObj(retVal, &len); if (len == 2 && path[0] != 0 && path[1] == ':') { if (Tcl_IsShared(retVal)) { TclDecrRefCount(retVal); retVal = Tcl_DuplicateObj(retVal); Tcl_IncrRefCount(retVal); } Tcl_AppendToObj(retVal, "/", 1); } } /* * Now we have an absolute path, with no '..', '.' sequences, but it still * may not be in 'unique' form, depending on the platform. For instance, * Unix is case-sensitive, so the path is ok. Windows is case-insensitive, * and also has the weird 'longname/shortname' thing (e.g. C:/Program * Files/ and C:/Progra~1/ are equivalent). * * Virtual file systems which may be registered may have other criteria * for normalizing a path. */ TclFSNormalizeToUniquePath(interp, retVal, 0, &clientData); /* * Since we know it is a normalized path, we can actually convert this * object into an FsPath for greater efficiency */ TclFSMakePathFromNormalized(interp, retVal, clientData); if (clientDataPtr != NULL) { *clientDataPtr = clientData; } /* * This has a refCount of 1 for the caller, unlike many Tcl_Obj APIs. */ return retVal; } /* *---------------------------------------------------------------------- * * Tcl_FSGetPathType -- * * Determines whether a given path is relative to the current directory, * relative to the current volume, or absolute. * * Results: * Returns one of TCL_PATH_ABSOLUTE, TCL_PATH_RELATIVE, or * TCL_PATH_VOLUME_RELATIVE. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_PathType Tcl_FSGetPathType( Tcl_Obj *pathPtr) { return TclFSGetPathType(pathPtr, NULL, NULL); } /* *---------------------------------------------------------------------- * * TclFSGetPathType -- * * Determines whether a given path is relative to the current directory, * relative to the current volume, or absolute. If the caller wishes to * know which filesystem claimed the path (in the case for which the path * is absolute), then a reference to a filesystem pointer can be passed * in (but passing NULL is acceptable). * * Results: * Returns one of TCL_PATH_ABSOLUTE, TCL_PATH_RELATIVE, or * TCL_PATH_VOLUME_RELATIVE. The filesystem reference will be set if and * only if it is non-NULL and the function's return value is * TCL_PATH_ABSOLUTE. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_PathType TclFSGetPathType( Tcl_Obj *pathPtr, Tcl_Filesystem **filesystemPtrPtr, int *driveNameLengthPtr) { FsPath *fsPathPtr; if (Tcl_FSConvertToPathType(NULL, pathPtr) != TCL_OK) { return TclGetPathType(pathPtr, filesystemPtrPtr, driveNameLengthPtr, NULL); } fsPathPtr = PATHOBJ(pathPtr); if (fsPathPtr->cwdPtr == NULL) { return TclGetPathType(pathPtr, filesystemPtrPtr, driveNameLengthPtr, NULL); } if (PATHFLAGS(pathPtr) == 0) { /* The path is not absolute... */ #ifdef __WIN32__ /* ... on Windows we must make another call to determine whether * it's relative or volumerelative [Bug 2571597]. */ return TclGetPathType(pathPtr, filesystemPtrPtr, driveNameLengthPtr, NULL); #else /* On other systems, quickly deduce !absolute -> relative */ return TCL_PATH_RELATIVE; #endif } return TclFSGetPathType(fsPathPtr->cwdPtr, filesystemPtrPtr, driveNameLengthPtr); } /* *--------------------------------------------------------------------------- * * TclPathPart * * This function calculates the requested part of the given path, which * can be: * * - the directory above ('file dirname') * - the tail ('file tail') * - the extension ('file extension') * - the root ('file root') * * The 'portion' parameter dictates which of these to calculate. There * are a number of special cases both to be more efficient, and because * the behaviour when given a path with only a single element is defined * to require the expansion of that single element, where possible. * * Should look into integrating 'FileBasename' in tclFCmd.c into this * function. * * Results: * NULL if an error occurred, otherwise a Tcl_Obj owned by the caller * (i.e. most likely with refCount 1). * * Side effects: * None. * *--------------------------------------------------------------------------- */ Tcl_Obj * TclPathPart( Tcl_Interp *interp, /* Used for error reporting */ Tcl_Obj *pathPtr, /* Path to take dirname of */ Tcl_PathPart portion) /* Requested portion of name */ { if (pathPtr->typePtr == &tclFsPathType) { FsPath *fsPathPtr = PATHOBJ(pathPtr); if (TclFSEpochOk(fsPathPtr->filesystemEpoch) && (PATHFLAGS(pathPtr) != 0)) { switch (portion) { case TCL_PATH_DIRNAME: { /* * Check if the joined-on bit has any directory delimiters in * it. If so, the 'dirname' would be a joining of the main * part with the dirname of the joined-on bit. We could handle * that special case here, but we don't, and instead just use * the standardPath code. */ int numBytes; const char *rest = Tcl_GetStringFromObj(fsPathPtr->normPathPtr, &numBytes); if (strchr(rest, '/') != NULL) { goto standardPath; } /* * If the joined-on bit is empty, then [file dirname] is * documented to return all but the last non-empty element * of the path, so we need to split apart the main part to * get the right answer. We could do that here, but it's * simpler to fall back to the standardPath code. * [Bug 2710920] */ if (numBytes == 0) { goto standardPath; } if (tclPlatform == TCL_PLATFORM_WINDOWS && strchr(rest, '\\') != NULL) { goto standardPath; } /* * The joined-on path is simple, so we can just return here. */ Tcl_IncrRefCount(fsPathPtr->cwdPtr); return fsPathPtr->cwdPtr; } case TCL_PATH_TAIL: { /* * Check if the joined-on bit has any directory delimiters in * it. If so, the 'tail' would be only the part following the * last delimiter. We could handle that special case here, but * we don't, and instead just use the standardPath code. */ int numBytes; const char *rest = Tcl_GetStringFromObj(fsPathPtr->normPathPtr, &numBytes); if (strchr(rest, '/') != NULL) { goto standardPath; } /* * If the joined-on bit is empty, then [file tail] is * documented to return the last non-empty element * of the path, so we need to split off the last element * of the main part to get the right answer. We could do * that here, but it's simpler to fall back to the * standardPath code. [Bug 2710920] */ if (numBytes == 0) { goto standardPath; } if (tclPlatform == TCL_PLATFORM_WINDOWS && strchr(rest, '\\') != NULL) { goto standardPath; } Tcl_IncrRefCount(fsPathPtr->normPathPtr); return fsPathPtr->normPathPtr; } case TCL_PATH_EXTENSION: return GetExtension(fsPathPtr->normPathPtr); case TCL_PATH_ROOT: { const char *fileName, *extension; int length; fileName = Tcl_GetStringFromObj(fsPathPtr->normPathPtr, &length); extension = TclGetExtension(fileName); if (extension == NULL) { /* * There is no extension so the root is the same as the * path we were given. */ Tcl_IncrRefCount(pathPtr); return pathPtr; } else { /* * Duplicate the object we were given and then trim off * the extension of the tail component of the path. */ FsPath *fsDupPtr; Tcl_Obj *root = Tcl_DuplicateObj(pathPtr); Tcl_IncrRefCount(root); fsDupPtr = PATHOBJ(root); if (Tcl_IsShared(fsDupPtr->normPathPtr)) { TclDecrRefCount(fsDupPtr->normPathPtr); fsDupPtr->normPathPtr = Tcl_NewStringObj(fileName, (int)(length - strlen(extension))); Tcl_IncrRefCount(fsDupPtr->normPathPtr); } else { Tcl_SetObjLength(fsDupPtr->normPathPtr, (int)(length - strlen(extension))); } /* * Must also trim the string representation if we have it. */ if (root->bytes != NULL && root->length > 0) { root->length -= strlen(extension); root->bytes[root->length] = 0; } return root; } } default: /* We should never get here */ Tcl_Panic("Bad portion to TclPathPart"); /* For less clever compilers */ return NULL; } } else if (fsPathPtr->cwdPtr != NULL) { /* Relative path */ goto standardPath; } else { /* Absolute path */ goto standardPath; } } else { int splitElements; Tcl_Obj *splitPtr, *resultPtr; standardPath: resultPtr = NULL; if (portion == TCL_PATH_EXTENSION) { return GetExtension(pathPtr); } else if (portion == TCL_PATH_ROOT) { int length; const char *fileName, *extension; fileName = Tcl_GetStringFromObj(pathPtr, &length); extension = TclGetExtension(fileName); if (extension == NULL) { Tcl_IncrRefCount(pathPtr); return pathPtr; } else { Tcl_Obj *root = Tcl_NewStringObj(fileName, (int) (length - strlen(extension))); Tcl_IncrRefCount(root); return root; } } /* * The behaviour we want here is slightly different to the standard * Tcl_FSSplitPath in the handling of home directories; * Tcl_FSSplitPath preserves the "~" while this code computes the * actual full path name, if we had just a single component. */ splitPtr = Tcl_FSSplitPath(pathPtr, &splitElements); Tcl_IncrRefCount(splitPtr); if (splitElements == 1 && TclGetString(pathPtr)[0] == '~') { Tcl_Obj *norm; TclDecrRefCount(splitPtr); norm = Tcl_FSGetNormalizedPath(interp, pathPtr); if (norm == NULL) { return NULL; } splitPtr = Tcl_FSSplitPath(norm, &splitElements); Tcl_IncrRefCount(splitPtr); } if (portion == TCL_PATH_TAIL) { /* * Return the last component, unless it is the only component, and * it is the root of an absolute path. */ if ((splitElements > 0) && ((splitElements > 1) || (Tcl_FSGetPathType(pathPtr) == TCL_PATH_RELATIVE))) { Tcl_ListObjIndex(NULL, splitPtr, splitElements-1, &resultPtr); } else { resultPtr = Tcl_NewObj(); } } else { /* * Return all but the last component. If there is only one * component, return it if the path was non-relative, otherwise * return the current directory. */ if (splitElements > 1) { resultPtr = Tcl_FSJoinPath(splitPtr, splitElements - 1); } else if (splitElements == 0 || (Tcl_FSGetPathType(pathPtr) == TCL_PATH_RELATIVE)) { TclNewLiteralStringObj(resultPtr, "."); } else { Tcl_ListObjIndex(NULL, splitPtr, 0, &resultPtr); } } Tcl_IncrRefCount(resultPtr); TclDecrRefCount(splitPtr); return resultPtr; } } /* * Simple helper function */ static Tcl_Obj * GetExtension( Tcl_Obj *pathPtr) { const char *tail, *extension; Tcl_Obj *ret; tail = TclGetString(pathPtr); extension = TclGetExtension(tail); if (extension == NULL) { ret = Tcl_NewObj(); } else { ret = Tcl_NewStringObj(extension, -1); } Tcl_IncrRefCount(ret); return ret; } /* *--------------------------------------------------------------------------- * * Tcl_FSJoinPath -- * * This function takes the given Tcl_Obj, which should be a valid list, * and returns the path object given by considering the first 'elements' * elements as valid path segments (each path segment may be a complete * path, a partial path or just a single possible directory or file * name). If any path segment is actually an absolute path, then all * prior path segments are discarded. * * If elements < 0, we use the entire list that was given. * * It is possible that the returned object is actually an element of the * given list, so the caller should be careful to store a refCount to it * before freeing the list. * * Results: * Returns object with refCount of zero, (or if non-zero, it has * references elsewhere in Tcl). Either way, the caller must increment * its refCount before use. Note that in the case where the caller has * asked to join zero elements of the list, the return value will be an * empty-string Tcl_Obj. * * If the given listObj was invalid, then the calling routine has a bug, * and this function will just return NULL. * * Side effects: * None. * *--------------------------------------------------------------------------- */ Tcl_Obj * Tcl_FSJoinPath( Tcl_Obj *listObj, /* Path elements to join, may have a zero * reference count. */ int elements) /* Number of elements to use (-1 = all) */ { Tcl_Obj *res; int i; Tcl_Filesystem *fsPtr = NULL; if (elements < 0) { if (Tcl_ListObjLength(NULL, listObj, &elements) != TCL_OK) { return NULL; } } else { /* * Just make sure it is a valid list. */ int listTest; if (Tcl_ListObjLength(NULL, listObj, &listTest) != TCL_OK) { return NULL; } /* * Correct this if it is too large, otherwise we will waste our time * joining null elements to the path. */ if (elements > listTest) { elements = listTest; } } res = NULL; for (i = 0; i < elements; i++) { Tcl_Obj *elt, *driveName = NULL; int driveNameLength, strEltLen, length; Tcl_PathType type; char *strElt, *ptr; Tcl_ListObjIndex(NULL, listObj, i, &elt); /* * This is a special case where we can be much more efficient, where * we are joining a single relative path onto an object that is * already of path type. The 'TclNewFSPathObj' call below creates an * object which can be normalized more efficiently. Currently we only * use the special case when we have exactly two elements, but we * could expand that in the future. */ if ((i == (elements-2)) && (i == 0) && (elt->typePtr == &tclFsPathType) && !(elt->bytes != NULL && (elt->bytes[0] == '\0'))) { Tcl_Obj *tail; Tcl_PathType type; Tcl_ListObjIndex(NULL, listObj, i+1, &tail); type = TclGetPathType(tail, NULL, NULL, NULL); if (type == TCL_PATH_RELATIVE) { const char *str; int len; str = Tcl_GetStringFromObj(tail, &len); if (len == 0) { /* * This happens if we try to handle the root volume '/'. * There's no need to return a special path object, when * the base itself is just fine! */ if (res != NULL) { TclDecrRefCount(res); } return elt; } /* * If it doesn't begin with '.' and is a unix path or it a * windows path without backslashes, then we can be very * efficient here. (In fact even a windows path with * backslashes can be joined efficiently, but the path object * would not have forward slashes only, and this would * therefore contradict our 'file join' documentation). */ if (str[0] != '.' && ((tclPlatform != TCL_PLATFORM_WINDOWS) || (strchr(str, '\\') == NULL))) { /* * Finally, on Windows, 'file join' is defined to convert * all backslashes to forward slashes, so the base part * cannot have backslashes either. */ if ((tclPlatform != TCL_PLATFORM_WINDOWS) || (strchr(Tcl_GetString(elt), '\\') == NULL)) { if (res != NULL) { TclDecrRefCount(res); } return TclNewFSPathObj(elt, str, len); } } /* * Otherwise we don't have an easy join, and we must let the * more general code below handle things */ } else if (tclPlatform == TCL_PLATFORM_UNIX) { if (res != NULL) { TclDecrRefCount(res); } return tail; } else { const char *str = Tcl_GetString(tail); if (tclPlatform == TCL_PLATFORM_WINDOWS) { if (strchr(str, '\\') == NULL) { if (res != NULL) { TclDecrRefCount(res); } return tail; } } } } strElt = Tcl_GetStringFromObj(elt, &strEltLen); type = TclGetPathType(elt, &fsPtr, &driveNameLength, &driveName); if (type != TCL_PATH_RELATIVE) { /* * Zero out the current result. */ if (res != NULL) { TclDecrRefCount(res); } if (driveName != NULL) { /* * We've been given a separate drive-name object, because the * prefix in 'elt' is not in a suitable format for us (e.g. it * may contain irrelevant multiple separators, like * C://///foo). */ res = Tcl_DuplicateObj(driveName); TclDecrRefCount(driveName); /* * Do not set driveName to NULL, because we will check its * value below (but we won't access the contents, since those * have been cleaned-up). */ } else { res = Tcl_NewStringObj(strElt, driveNameLength); } strElt += driveNameLength; } else if (driveName != NULL) { Tcl_DecrRefCount(driveName); } /* * Optimisation block: if this is the last element to be examined, and * it is absolute or the only element, and the drive-prefix was ok (if * there is one), it might be that the path is already in a suitable * form to be returned. Then we can short-cut the rest of this * function. */ if ((driveName == NULL) && (i == (elements - 1)) && (type != TCL_PATH_RELATIVE || res == NULL)) { /* * It's the last path segment. Perform a quick check if the path * is already in a suitable form. */ if (tclPlatform == TCL_PLATFORM_WINDOWS) { if (strchr(strElt, '\\') != NULL) { goto noQuickReturn; } } ptr = strElt; while (*ptr != '\0') { if (*ptr == '/' && (ptr[1] == '/' || ptr[1] == '\0')) { /* * We have a repeated file separator, which means the path * is not in normalized form */ goto noQuickReturn; } ptr++; } if (res != NULL) { TclDecrRefCount(res); } /* * This element is just what we want to return already - no * further manipulation is requred. */ return elt; } /* * The path element was not of a suitable form to be returned as is. * We need to perform a more complex operation here. */ noQuickReturn: if (res == NULL) { res = Tcl_NewObj(); ptr = Tcl_GetStringFromObj(res, &length); } else { ptr = Tcl_GetStringFromObj(res, &length); } /* * Strip off any './' before a tilde, unless this is the beginning of * the path. */ if (length > 0 && strEltLen > 0 && (strElt[0] == '.') && (strElt[1] == '/') && (strElt[2] == '~')) { strElt += 2; } /* * A NULL value for fsPtr at this stage basically means we're trying * to join a relative path onto something which is also relative (or * empty). There's nothing particularly wrong with that. */ if (*strElt == '\0') { continue; } if (fsPtr == &tclNativeFilesystem || fsPtr == NULL) { TclpNativeJoinPath(res, strElt); } else { char separator = '/'; int needsSep = 0; if (fsPtr->filesystemSeparatorProc != NULL) { Tcl_Obj *sep = (*fsPtr->filesystemSeparatorProc)(res); if (sep != NULL) { separator = TclGetString(sep)[0]; } } if (length > 0 && ptr[length -1] != '/') { Tcl_AppendToObj(res, &separator, 1); length++; } Tcl_SetObjLength(res, length + (int) strlen(strElt)); ptr = TclGetString(res) + length; for (; *strElt != '\0'; strElt++) { if (*strElt == separator) { while (strElt[1] == separator) { strElt++; } if (strElt[1] != '\0') { if (needsSep) { *ptr++ = separator; } } } else { *ptr++ = *strElt; needsSep = 1; } } length = ptr - TclGetString(res); Tcl_SetObjLength(res, length); } } if (res == NULL) { res = Tcl_NewObj(); } return res; } /* *--------------------------------------------------------------------------- * * Tcl_FSConvertToPathType -- * * This function tries to convert the given Tcl_Obj to a valid Tcl path * type, taking account of the fact that the cwd may have changed even if * this object is already supposedly of the correct type. * * The filename may begin with "~" (to indicate current user's home * directory) or "~" (to indicate any user's home directory). * * Results: * Standard Tcl error code. * * Side effects: * The old representation may be freed, and new memory allocated. * *--------------------------------------------------------------------------- */ int Tcl_FSConvertToPathType( Tcl_Interp *interp, /* Interpreter in which to store error message * (if necessary). */ Tcl_Obj *pathPtr) /* Object to convert to a valid, current path * type. */ { /* * While it is bad practice to examine an object's type directly, this is * actually the best thing to do here. The reason is that if we are * converting this object to FsPath type for the first time, we don't need * to worry whether the 'cwd' has changed. On the other hand, if this * object is already of FsPath type, and is a relative path, we do have to * worry about the cwd. If the cwd has changed, we must recompute the * path. */ if (pathPtr->typePtr == &tclFsPathType) { if (TclFSEpochOk(PATHOBJ(pathPtr)->filesystemEpoch)) { return TCL_OK; } if (pathPtr->bytes == NULL) { UpdateStringOfFsPath(pathPtr); } FreeFsPathInternalRep(pathPtr); pathPtr->typePtr = NULL; } return Tcl_ConvertToType(interp, pathPtr, &tclFsPathType); /* * We used to have more complex code here: * * FsPath *fsPathPtr = PATHOBJ(pathPtr); * if (fsPathPtr->cwdPtr == NULL || PATHFLAGS(pathPtr) != 0) { * return TCL_OK; * } else { * if (TclFSCwdPointerEquals(&fsPathPtr->cwdPtr)) { * return TCL_OK; * } else { * if (pathPtr->bytes == NULL) { * UpdateStringOfFsPath(pathPtr); * } * FreeFsPathInternalRep(pathPtr); * pathPtr->typePtr = NULL; * return Tcl_ConvertToType(interp, pathPtr, &tclFsPathType); * } * } * * But we no longer believe this is necessary. */ } /* * Helper function for normalization. */ static int IsSeparatorOrNull( int ch) { if (ch == 0) { return 1; } switch (tclPlatform) { case TCL_PLATFORM_UNIX: return (ch == '/' ? 1 : 0); case TCL_PLATFORM_WINDOWS: return ((ch == '/' || ch == '\\') ? 1 : 0); } return 0; } /* * Helper function for SetFsPathFromAny. Returns position of first directory * delimiter in the path. If no separator is found, then returns the position * of the end of the string. */ static int FindSplitPos( const char *path, int separator) { int count = 0; switch (tclPlatform) { case TCL_PLATFORM_UNIX: while (path[count] != 0) { if (path[count] == separator) { return count; } count++; } break; case TCL_PLATFORM_WINDOWS: while (path[count] != 0) { if (path[count] == separator || path[count] == '\\') { return count; } count++; } break; } return count; } /* *--------------------------------------------------------------------------- * * TclNewFSPathObj -- * * Creates a path object whose string representation is '[file join * dirPtr addStrRep]', but does so in a way that allows for more * efficient creation and caching of normalized paths, and more efficient * 'file dirname', 'file tail', etc. * * Assumptions: * 'dirPtr' must be an absolute path. 'len' may not be zero. * * Results: * The new Tcl object, with refCount zero. * * Side effects: * Memory is allocated. 'dirPtr' gets an additional refCount. * *--------------------------------------------------------------------------- */ Tcl_Obj * TclNewFSPathObj( Tcl_Obj *dirPtr, const char *addStrRep, int len) { FsPath *fsPathPtr; Tcl_Obj *pathPtr; ThreadSpecificData *tsdPtr; const char *p; int state = 0, count = 0; tsdPtr = TCL_TSD_INIT(&tclFsDataKey); pathPtr = Tcl_NewObj(); fsPathPtr = (FsPath *) ckalloc(sizeof(FsPath)); /* * Set up the path. */ fsPathPtr->translatedPathPtr = NULL; fsPathPtr->normPathPtr = Tcl_NewStringObj(addStrRep, len); Tcl_IncrRefCount(fsPathPtr->normPathPtr); fsPathPtr->cwdPtr = dirPtr; Tcl_IncrRefCount(dirPtr); fsPathPtr->nativePathPtr = NULL; fsPathPtr->fsRecPtr = NULL; fsPathPtr->filesystemEpoch = tsdPtr->filesystemEpoch; SETPATHOBJ(pathPtr, fsPathPtr); PATHFLAGS(pathPtr) = TCLPATH_APPENDED; pathPtr->typePtr = &tclFsPathType; pathPtr->bytes = NULL; pathPtr->length = 0; /* * Look for path components made up of only "." * This is overly conservative analysis to keep simple. It may * mark some things as needing more aggressive normalization * that don't actually need it. No harm done. */ for (p = addStrRep; len > 0; p++, len--) { switch (state) { case 0: /* So far only "." since last dirsep or start */ switch (*p) { case '.': count++; break; case '/': case '\\': case ':': if (count) { PATHFLAGS(pathPtr) |= TCLPATH_NEEDNORM; len = 0; } break; default: count = 0; state = 1; } case 1: /* Scanning for next dirsep */ switch (*p) { case '/': case '\\': case ':': state = 0; break; } } } if (len == 0 && count) { PATHFLAGS(pathPtr) |= TCLPATH_NEEDNORM; } return pathPtr; } /* *--------------------------------------------------------------------------- * * TclFSMakePathRelative -- * * Only for internal use. * * Takes a path and a directory, where we _assume_ both path and * directory are absolute, normalized and that the path lies inside the * directory. Returns a Tcl_Obj representing filename of the path * relative to the directory. * * In the case where the resulting path would start with a '~', we take * special care to return an ordinary string. This means to use that path * (and not have it interpreted as a user name), one must prepend './'. * This may seem strange, but that is how 'glob' is currently defined. * * Results: * NULL on error, otherwise a valid object, typically with refCount of * zero, which it is assumed the caller will increment. * * Side effects: * The old representation may be freed, and new memory allocated. * *--------------------------------------------------------------------------- */ Tcl_Obj * TclFSMakePathRelative( Tcl_Interp *interp, /* Used for error reporting if not NULL. */ Tcl_Obj *pathPtr, /* The path we have. */ Tcl_Obj *cwdPtr) /* Make it relative to this. */ { int cwdLen, len; const char *tempStr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); if (pathPtr->typePtr == &tclFsPathType) { FsPath *fsPathPtr = PATHOBJ(pathPtr); if (PATHFLAGS(pathPtr) != 0 && fsPathPtr->cwdPtr == cwdPtr) { pathPtr = fsPathPtr->normPathPtr; /* * Free old representation. */ if (pathPtr->typePtr != NULL) { if (pathPtr->bytes == NULL) { if (pathPtr->typePtr->updateStringProc == NULL) { if (interp != NULL) { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "can't find object" "string representation", NULL); } return NULL; } pathPtr->typePtr->updateStringProc(pathPtr); } TclFreeIntRep(pathPtr); } /* * Now pathPtr is a string object. */ if (Tcl_GetString(pathPtr)[0] == '~') { /* * If the first character of the path is a tilde, we must just * return the path as is, to agree with the defined behaviour * of 'glob'. */ return pathPtr; } fsPathPtr = (FsPath *) ckalloc(sizeof(FsPath)); /* * Circular reference, by design. */ fsPathPtr->translatedPathPtr = pathPtr; fsPathPtr->normPathPtr = NULL; fsPathPtr->cwdPtr = cwdPtr; Tcl_IncrRefCount(cwdPtr); fsPathPtr->nativePathPtr = NULL; fsPathPtr->fsRecPtr = NULL; fsPathPtr->filesystemEpoch = tsdPtr->filesystemEpoch; SETPATHOBJ(pathPtr, fsPathPtr); PATHFLAGS(pathPtr) = 0; pathPtr->typePtr = &tclFsPathType; return pathPtr; } } /* * We know the cwd is a normalised object which does not end in a * directory delimiter, unless the cwd is the name of a volume, in which * case it will end in a delimiter! We handle this situation here. A * better test than the '!= sep' might be to simply check if 'cwd' is a * root volume. * * Note that if we get this wrong, we will strip off either too much or * too little below, leading to wrong answers returned by glob. */ tempStr = Tcl_GetStringFromObj(cwdPtr, &cwdLen); /* * Should we perhaps use 'Tcl_FSPathSeparator'? But then what about the * Windows special case? Perhaps we should just check if cwd is a root * volume. */ switch (tclPlatform) { case TCL_PLATFORM_UNIX: if (tempStr[cwdLen-1] != '/') { cwdLen++; } break; case TCL_PLATFORM_WINDOWS: if (tempStr[cwdLen-1] != '/' && tempStr[cwdLen-1] != '\\') { cwdLen++; } break; } tempStr = Tcl_GetStringFromObj(pathPtr, &len); return Tcl_NewStringObj(tempStr + cwdLen, len - cwdLen); } /* *--------------------------------------------------------------------------- * * TclFSMakePathFromNormalized -- * * Like SetFsPathFromAny, but assumes the given object is an absolute * normalized path. Only for internal use. * * Results: * Standard Tcl error code. * * Side effects: * The old representation may be freed, and new memory allocated. * *--------------------------------------------------------------------------- */ int TclFSMakePathFromNormalized( Tcl_Interp *interp, /* Used for error reporting if not NULL. */ Tcl_Obj *pathPtr, /* The object to convert. */ ClientData nativeRep) /* The native rep for the object, if known * else NULL. */ { FsPath *fsPathPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); if (pathPtr->typePtr == &tclFsPathType) { return TCL_OK; } /* * Free old representation */ if (pathPtr->typePtr != NULL) { if (pathPtr->bytes == NULL) { if (pathPtr->typePtr->updateStringProc == NULL) { if (interp != NULL) { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "can't find object" "string representation", NULL); } return TCL_ERROR; } pathPtr->typePtr->updateStringProc(pathPtr); } TclFreeIntRep(pathPtr); } fsPathPtr = (FsPath *) ckalloc(sizeof(FsPath)); /* * It's a pure normalized absolute path. */ fsPathPtr->translatedPathPtr = NULL; /* * Circular reference by design. */ fsPathPtr->normPathPtr = pathPtr; fsPathPtr->cwdPtr = NULL; fsPathPtr->nativePathPtr = nativeRep; fsPathPtr->fsRecPtr = NULL; fsPathPtr->filesystemEpoch = tsdPtr->filesystemEpoch; SETPATHOBJ(pathPtr, fsPathPtr); PATHFLAGS(pathPtr) = 0; pathPtr->typePtr = &tclFsPathType; return TCL_OK; } /* *--------------------------------------------------------------------------- * * Tcl_FSNewNativePath -- * * This function performs the something like the reverse of the usual * obj->path->nativerep conversions. If some code retrieves a path in * native form (from, e.g. readlink or a native dialog), and that path is * to be used at the Tcl level, then calling this function is an * efficient way of creating the appropriate path object type. * * Any memory which is allocated for 'clientData' should be retained * until clientData is passed to the filesystem's freeInternalRepProc * when it can be freed. The built in platform-specific filesystems use * 'ckalloc' to allocate clientData, and ckfree to free it. * * Results: * NULL or a valid path object pointer, with refCount zero. * * Side effects: * New memory may be allocated. * *--------------------------------------------------------------------------- */ Tcl_Obj * Tcl_FSNewNativePath( Tcl_Filesystem *fromFilesystem, ClientData clientData) { Tcl_Obj *pathPtr; FsPath *fsPathPtr; FilesystemRecord *fsFromPtr; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); pathPtr = TclFSInternalToNormalized(fromFilesystem, clientData, &fsFromPtr); if (pathPtr == NULL) { return NULL; } /* * Free old representation; shouldn't normally be any, but best to be * safe. */ if (pathPtr->typePtr != NULL) { if (pathPtr->bytes == NULL) { if (pathPtr->typePtr->updateStringProc == NULL) { return NULL; } pathPtr->typePtr->updateStringProc(pathPtr); } TclFreeIntRep(pathPtr); } fsPathPtr = (FsPath *) ckalloc(sizeof(FsPath)); fsPathPtr->translatedPathPtr = NULL; /* * Circular reference, by design. */ fsPathPtr->normPathPtr = pathPtr; fsPathPtr->cwdPtr = NULL; fsPathPtr->nativePathPtr = clientData; fsPathPtr->fsRecPtr = fsFromPtr; fsPathPtr->fsRecPtr->fileRefCount++; fsPathPtr->filesystemEpoch = tsdPtr->filesystemEpoch; SETPATHOBJ(pathPtr, fsPathPtr); PATHFLAGS(pathPtr) = 0; pathPtr->typePtr = &tclFsPathType; return pathPtr; } /* *--------------------------------------------------------------------------- * * Tcl_FSGetTranslatedPath -- * * This function attempts to extract the translated path from the given * Tcl_Obj. If the translation succeeds (i.e. the object is a valid * path), then it is returned. Otherwise NULL will be returned, and an * error message may be left in the interpreter (if it is non-NULL) * * Results: * NULL or a valid Tcl_Obj pointer. * * Side effects: * Only those of 'Tcl_FSConvertToPathType' * *--------------------------------------------------------------------------- */ Tcl_Obj * Tcl_FSGetTranslatedPath( Tcl_Interp *interp, Tcl_Obj *pathPtr) { Tcl_Obj *retObj = NULL; FsPath *srcFsPathPtr; if (Tcl_FSConvertToPathType(interp, pathPtr) != TCL_OK) { return NULL; } srcFsPathPtr = PATHOBJ(pathPtr); if (srcFsPathPtr->translatedPathPtr == NULL) { if (PATHFLAGS(pathPtr) != 0) { /* * We lack a translated path result, but we have a directory * (cwdPtr) and a tail (normPathPtr), and if we join the * translated version of cwdPtr to normPathPtr, we'll get the * translated result we need, and can store it for future use. */ Tcl_Obj *translatedCwdPtr = Tcl_FSGetTranslatedPath(interp, srcFsPathPtr->cwdPtr); retObj = Tcl_FSJoinToPath(translatedCwdPtr, 1, &(srcFsPathPtr->normPathPtr)); srcFsPathPtr->translatedPathPtr = retObj; Tcl_IncrRefCount(retObj); Tcl_DecrRefCount(translatedCwdPtr); } else { /* * It is a pure absolute, normalized path object. This is * something like being a 'pure list'. The object's string, * translatedPath and normalizedPath are all identical. */ retObj = srcFsPathPtr->normPathPtr; } } else { /* * It is an ordinary path object. */ retObj = srcFsPathPtr->translatedPathPtr; } if (retObj != NULL) { Tcl_IncrRefCount(retObj); } return retObj; } /* *--------------------------------------------------------------------------- * * Tcl_FSGetTranslatedStringPath -- * * This function attempts to extract the translated path from the given * Tcl_Obj. If the translation succeeds (i.e. the object is a valid * path), then the path is returned. Otherwise NULL will be returned, and * an error message may be left in the interpreter (if it is non-NULL) * * Results: * NULL or a valid string. * * Side effects: * Only those of 'Tcl_FSConvertToPathType' * *--------------------------------------------------------------------------- */ const char * Tcl_FSGetTranslatedStringPath( Tcl_Interp *interp, Tcl_Obj *pathPtr) { Tcl_Obj *transPtr = Tcl_FSGetTranslatedPath(interp, pathPtr); if (transPtr != NULL) { int len; const char *orig = Tcl_GetStringFromObj(transPtr, &len); char *result = (char *) ckalloc((unsigned) len+1); memcpy(result, orig, (size_t) len+1); TclDecrRefCount(transPtr); return result; } return NULL; } /* *--------------------------------------------------------------------------- * * Tcl_FSGetNormalizedPath -- * * This important function attempts to extract from the given Tcl_Obj a * unique normalised path representation, whose string value can be used * as a unique identifier for the file. * * Results: * NULL or a valid path object pointer. * * Side effects: * New memory may be allocated. The Tcl 'errno' may be modified in the * process of trying to examine various path possibilities. * *--------------------------------------------------------------------------- */ Tcl_Obj * Tcl_FSGetNormalizedPath( Tcl_Interp *interp, Tcl_Obj *pathPtr) { FsPath *fsPathPtr; if (Tcl_FSConvertToPathType(interp, pathPtr) != TCL_OK) { return NULL; } fsPathPtr = PATHOBJ(pathPtr); if (PATHFLAGS(pathPtr) != 0) { /* * This is a special path object which is the result of something like * 'file join' */ Tcl_Obj *dir, *copy; int cwdLen; int pathType; const char *cwdStr; ClientData clientData = NULL; pathType = Tcl_FSGetPathType(fsPathPtr->cwdPtr); dir = Tcl_FSGetNormalizedPath(interp, fsPathPtr->cwdPtr); if (dir == NULL) { return NULL; } if (pathPtr->bytes == NULL) { UpdateStringOfFsPath(pathPtr); } copy = Tcl_DuplicateObj(dir); Tcl_IncrRefCount(copy); Tcl_IncrRefCount(dir); /* * We now own a reference on both 'dir' and 'copy' */ cwdStr = Tcl_GetStringFromObj(copy, &cwdLen); /* * Should we perhaps use 'Tcl_FSPathSeparator'? But then what about * the Windows special case? Perhaps we should just check if cwd is a * root volume. We should never get cwdLen == 0 in this code path. */ switch (tclPlatform) { case TCL_PLATFORM_UNIX: if (cwdStr[cwdLen-1] != '/') { Tcl_AppendToObj(copy, "/", 1); cwdLen++; } break; case TCL_PLATFORM_WINDOWS: if (cwdStr[cwdLen-1] != '/' && cwdStr[cwdLen-1] != '\\') { Tcl_AppendToObj(copy, "/", 1); cwdLen++; } break; } Tcl_AppendObjToObj(copy, fsPathPtr->normPathPtr); /* Normalize the combined string. */ if (PATHFLAGS(pathPtr) & TCLPATH_NEEDNORM) { /* * If the "tail" part has components (like /../) that cause * the combined path to need more complete normalizing, * call on the more powerful routine to accomplish that so * we avoid [Bug 2385549] ... */ Tcl_Obj *newCopy = TclFSNormalizeAbsolutePath(interp, copy, NULL); Tcl_DecrRefCount(copy); copy = newCopy; } else { /* * ... but in most cases where we join a trouble free tail * to a normalized head, we can more efficiently normalize the * combined path by passing over only the unnormalized tail * portion. When this is sufficient, prior developers claim * this should be much faster. We use 'cwdLen-1' so that we are * already pointing at the dir-separator that we know about. * The normalization code will actually start off directly * after that separator. */ TclFSNormalizeToUniquePath(interp, copy, cwdLen-1, (fsPathPtr->nativePathPtr == NULL ? &clientData : NULL)); } /* Now we need to construct the new path object. */ if (pathType == TCL_PATH_RELATIVE) { Tcl_Obj *origDir = fsPathPtr->cwdPtr; /* * NOTE: here we are (dangerously?) assuming that origDir points * to a Tcl_Obj with Tcl_ObjType == &tclFsPathType . The * pathType = Tcl_FSGetPathType(fsPathPtr->cwdPtr); * above that set the pathType value should have established * that, but it's far less clear on what basis we know there's * been no shimmering since then. */ FsPath *origDirFsPathPtr = PATHOBJ(origDir); fsPathPtr->cwdPtr = origDirFsPathPtr->cwdPtr; Tcl_IncrRefCount(fsPathPtr->cwdPtr); TclDecrRefCount(fsPathPtr->normPathPtr); fsPathPtr->normPathPtr = copy; /* * That's our reference to copy used. */ TclDecrRefCount(dir); TclDecrRefCount(origDir); } else { TclDecrRefCount(fsPathPtr->cwdPtr); fsPathPtr->cwdPtr = NULL; TclDecrRefCount(fsPathPtr->normPathPtr); fsPathPtr->normPathPtr = copy; /* * That's our reference to copy used. */ TclDecrRefCount(dir); } if (clientData != NULL) { /* * This may be unnecessary. It appears that the * TclFSNormalizeToUniquePath call above should have already * set this up. Not changing out of fear of the unknown. */ fsPathPtr->nativePathPtr = clientData; } PATHFLAGS(pathPtr) = 0; } /* * Ensure cwd hasn't changed. */ if (fsPathPtr->cwdPtr != NULL) { if (!TclFSCwdPointerEquals(&fsPathPtr->cwdPtr)) { if (pathPtr->bytes == NULL) { UpdateStringOfFsPath(pathPtr); } FreeFsPathInternalRep(pathPtr); pathPtr->typePtr = NULL; if (Tcl_ConvertToType(interp, pathPtr, &tclFsPathType) != TCL_OK) { return NULL; } fsPathPtr = PATHOBJ(pathPtr); } else if (fsPathPtr->normPathPtr == NULL) { int cwdLen; Tcl_Obj *copy; const char *cwdStr; ClientData clientData = NULL; copy = Tcl_DuplicateObj(fsPathPtr->cwdPtr); Tcl_IncrRefCount(copy); cwdStr = Tcl_GetStringFromObj(copy, &cwdLen); /* * Should we perhaps use 'Tcl_FSPathSeparator'? But then what * about the Windows special case? Perhaps we should just check if * cwd is a root volume. We should never get cwdLen == 0 in this * code path. */ switch (tclPlatform) { case TCL_PLATFORM_UNIX: if (cwdStr[cwdLen-1] != '/') { Tcl_AppendToObj(copy, "/", 1); cwdLen++; } break; case TCL_PLATFORM_WINDOWS: if (cwdStr[cwdLen-1] != '/' && cwdStr[cwdLen-1] != '\\') { Tcl_AppendToObj(copy, "/", 1); cwdLen++; } break; } Tcl_AppendObjToObj(copy, pathPtr); /* * Normalize the combined string, but only starting after the end * of the previously normalized 'dir'. This should be much faster! */ TclFSNormalizeToUniquePath(interp, copy, cwdLen-1, (fsPathPtr->nativePathPtr == NULL ? &clientData : NULL)); fsPathPtr->normPathPtr = copy; if (clientData != NULL) { fsPathPtr->nativePathPtr = clientData; } } } if (fsPathPtr->normPathPtr == NULL) { ClientData clientData = NULL; Tcl_Obj *useThisCwd = NULL; int pureNormalized = 1; /* * Since normPathPtr is NULL, but this is a valid path object, we know * that the translatedPathPtr cannot be NULL. */ Tcl_Obj *absolutePath = fsPathPtr->translatedPathPtr; const char *path = TclGetString(absolutePath); Tcl_IncrRefCount(absolutePath); /* * We have to be a little bit careful here to avoid infinite loops * we're asking Tcl_FSGetPathType to return the path's type, but that * call can actually result in a lot of other filesystem action, which * might loop back through here. */ if (path[0] == '\0') { /* * Special handling for the empty string value. This one is * very weird with [file normalize {}] => {}. (The reasoning * supporting this is unknown to DGP, but he fears changing it.) * Attempt here to keep the expectations of other parts of * Tcl_Filesystem code about state of the FsPath fields satisfied. * * In particular, capture the cwd value and save so it can be * stored in the cwdPtr field below. */ useThisCwd = Tcl_FSGetCwd(interp); } else { /* * We don't ask for the type of 'pathPtr' here, because that is * not correct for our purposes when we have a path like '~'. Tcl * has a bit of a contradiction in that '~' paths are defined as * 'absolute', but in reality can be just about anything, * depending on how env(HOME) is set. */ Tcl_PathType type = Tcl_FSGetPathType(absolutePath); if (type == TCL_PATH_RELATIVE) { useThisCwd = Tcl_FSGetCwd(interp); if (useThisCwd == NULL) { return NULL; } pureNormalized = 0; Tcl_DecrRefCount(absolutePath); absolutePath = Tcl_FSJoinToPath(useThisCwd, 1, &absolutePath); Tcl_IncrRefCount(absolutePath); /* * We have a refCount on the cwd. */ #ifdef __WIN32__ } else if (type == TCL_PATH_VOLUME_RELATIVE) { /* * Only Windows has volume-relative paths. */ Tcl_DecrRefCount(absolutePath); absolutePath = TclWinVolumeRelativeNormalize(interp, path, &useThisCwd); if (absolutePath == NULL) { return NULL; } pureNormalized = 0; #endif /* __WIN32__ */ } } /* * Already has refCount incremented. */ fsPathPtr->normPathPtr = TclFSNormalizeAbsolutePath(interp, absolutePath, (fsPathPtr->nativePathPtr == NULL ? &clientData : NULL)); if (0 && (clientData != NULL)) { fsPathPtr->nativePathPtr = (*fsPathPtr->fsRecPtr->fsPtr->dupInternalRepProc)(clientData); } /* * Check if path is pure normalized (this can only be the case if it * is an absolute path). */ if (pureNormalized) { if (!strcmp(TclGetString(fsPathPtr->normPathPtr), TclGetString(pathPtr))) { /* * The path was already normalized. Get rid of the duplicate. */ TclDecrRefCount(fsPathPtr->normPathPtr); /* * We do *not* increment the refCount for this circular * reference. */ fsPathPtr->normPathPtr = pathPtr; } } if (useThisCwd != NULL) { /* * We just need to free an object we allocated above for relative * paths (this was returned by Tcl_FSJoinToPath above), and then * of course store the cwd. */ fsPathPtr->cwdPtr = useThisCwd; } TclDecrRefCount(absolutePath); } return fsPathPtr->normPathPtr; } /* *--------------------------------------------------------------------------- * * Tcl_FSGetInternalRep -- * * Extract the internal representation of a given path object, in the * given filesystem. If the path object belongs to a different * filesystem, we return NULL. * * If the internal representation is currently NULL, we attempt to * generate it, by calling the filesystem's * 'Tcl_FSCreateInternalRepProc'. * * Results: * NULL or a valid internal representation. * * Side effects: * An attempt may be made to convert the object. * *--------------------------------------------------------------------------- */ ClientData Tcl_FSGetInternalRep( Tcl_Obj *pathPtr, Tcl_Filesystem *fsPtr) { FsPath *srcFsPathPtr; if (Tcl_FSConvertToPathType(NULL, pathPtr) != TCL_OK) { return NULL; } srcFsPathPtr = PATHOBJ(pathPtr); /* * We will only return the native representation for the caller's * filesystem. Otherwise we will simply return NULL. This means that there * must be a unique bi-directional mapping between paths and filesystems, * and that this mapping will not allow 'remapped' files -- files which * are in one filesystem but mapped into another. Another way of putting * this is that 'stacked' filesystems are not allowed. We recognise that * this is a potentially useful feature for the future. * * Even something simple like a 'pass through' filesystem which logs all * activity and passes the calls onto the native system would be nice, but * not easily achievable with the current implementation. */ if (srcFsPathPtr->fsRecPtr == NULL) { /* * This only usually happens in wrappers like TclpStat which create a * string object and pass it to TclpObjStat. Code which calls the * Tcl_FS.. functions should always have a filesystem already set. * Whether this code path is legal or not depends on whether we decide * to allow external code to call the native filesystem directly. It * is at least safer to allow this sub-optimal routing. */ Tcl_FSGetFileSystemForPath(pathPtr); /* * If we fail through here, then the path is probably not a valid path * in the filesystsem, and is most likely to be a use of the empty * path "" via a direct call to one of the objectified interfaces * (e.g. from the Tcl testsuite). */ srcFsPathPtr = PATHOBJ(pathPtr); if (srcFsPathPtr->fsRecPtr == NULL) { return NULL; } } /* * There is still one possibility we should consider; if the file belongs * to a different filesystem, perhaps it is actually linked through to a * file in our own filesystem which we do care about. The way we can check * for this is we ask what filesystem this path belongs to. */ if (fsPtr != srcFsPathPtr->fsRecPtr->fsPtr) { const Tcl_Filesystem *actualFs = Tcl_FSGetFileSystemForPath(pathPtr); if (actualFs == fsPtr) { return Tcl_FSGetInternalRep(pathPtr, fsPtr); } return NULL; } if (srcFsPathPtr->nativePathPtr == NULL) { Tcl_FSCreateInternalRepProc *proc; char *nativePathPtr; proc = srcFsPathPtr->fsRecPtr->fsPtr->createInternalRepProc; if (proc == NULL) { return NULL; } nativePathPtr = (*proc)(pathPtr); srcFsPathPtr = PATHOBJ(pathPtr); srcFsPathPtr->nativePathPtr = nativePathPtr; } return srcFsPathPtr->nativePathPtr; } /* *--------------------------------------------------------------------------- * * TclFSEnsureEpochOk -- * * This will ensure the pathPtr is up to date and can be converted into a * "path" type, and that we are able to generate a complete normalized * path which is used to determine the filesystem match. * * Results: * Standard Tcl return code. * * Side effects: * An attempt may be made to convert the object. * *--------------------------------------------------------------------------- */ int TclFSEnsureEpochOk( Tcl_Obj *pathPtr, Tcl_Filesystem **fsPtrPtr) { FsPath *srcFsPathPtr; if (pathPtr->typePtr != &tclFsPathType) { return TCL_OK; } srcFsPathPtr = PATHOBJ(pathPtr); /* * Check if the filesystem has changed in some way since this object's * internal representation was calculated. */ if (!TclFSEpochOk(srcFsPathPtr->filesystemEpoch)) { /* * We have to discard the stale representation and recalculate it. */ if (pathPtr->bytes == NULL) { UpdateStringOfFsPath(pathPtr); } FreeFsPathInternalRep(pathPtr); pathPtr->typePtr = NULL; if (SetFsPathFromAny(NULL, pathPtr) != TCL_OK) { return TCL_ERROR; } srcFsPathPtr = PATHOBJ(pathPtr); } /* * Check whether the object is already assigned to a fs. */ if (srcFsPathPtr->fsRecPtr != NULL) { *fsPtrPtr = srcFsPathPtr->fsRecPtr->fsPtr; } return TCL_OK; } /* *--------------------------------------------------------------------------- * * TclFSSetPathDetails -- * * ??? * * Results: * None * * Side effects: * ??? * *--------------------------------------------------------------------------- */ void TclFSSetPathDetails( Tcl_Obj *pathPtr, FilesystemRecord *fsRecPtr, ClientData clientData) { ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); FsPath *srcFsPathPtr; /* * Make sure pathPtr is of the correct type. */ if (pathPtr->typePtr != &tclFsPathType) { if (SetFsPathFromAny(NULL, pathPtr) != TCL_OK) { return; } } srcFsPathPtr = PATHOBJ(pathPtr); srcFsPathPtr->fsRecPtr = fsRecPtr; srcFsPathPtr->nativePathPtr = clientData; srcFsPathPtr->filesystemEpoch = tsdPtr->filesystemEpoch; fsRecPtr->fileRefCount++; } /* *--------------------------------------------------------------------------- * * Tcl_FSEqualPaths -- * * This function tests whether the two paths given are equal path * objects. If either or both is NULL, 0 is always returned. * * Results: * 1 or 0. * * Side effects: * None. * *--------------------------------------------------------------------------- */ int Tcl_FSEqualPaths( Tcl_Obj *firstPtr, Tcl_Obj *secondPtr) { char *firstStr, *secondStr; int firstLen, secondLen, tempErrno; if (firstPtr == secondPtr) { return 1; } if (firstPtr == NULL || secondPtr == NULL) { return 0; } firstStr = Tcl_GetStringFromObj(firstPtr, &firstLen); secondStr = Tcl_GetStringFromObj(secondPtr, &secondLen); if ((firstLen == secondLen) && (strcmp(firstStr, secondStr) == 0)) { return 1; } /* * Try the most thorough, correct method of comparing fully normalized * paths. */ tempErrno = Tcl_GetErrno(); firstPtr = Tcl_FSGetNormalizedPath(NULL, firstPtr); secondPtr = Tcl_FSGetNormalizedPath(NULL, secondPtr); Tcl_SetErrno(tempErrno); if (firstPtr == NULL || secondPtr == NULL) { return 0; } firstStr = Tcl_GetStringFromObj(firstPtr, &firstLen); secondStr = Tcl_GetStringFromObj(secondPtr, &secondLen); return (firstLen == secondLen) && (strcmp(firstStr, secondStr) == 0); } /* *--------------------------------------------------------------------------- * * SetFsPathFromAny -- * * This function tries to convert the given Tcl_Obj to a valid Tcl path * type. * * The filename may begin with "~" (to indicate current user's home * directory) or "~" (to indicate any user's home directory). * * Results: * Standard Tcl error code. * * Side effects: * The old representation may be freed, and new memory allocated. * *--------------------------------------------------------------------------- */ static int SetFsPathFromAny( Tcl_Interp *interp, /* Used for error reporting if not NULL. */ Tcl_Obj *pathPtr) /* The object to convert. */ { int len; FsPath *fsPathPtr; Tcl_Obj *transPtr; char *name; ThreadSpecificData *tsdPtr = TCL_TSD_INIT(&tclFsDataKey); if (pathPtr->typePtr == &tclFsPathType) { return TCL_OK; } /* * First step is to translate the filename. This is similar to * Tcl_TranslateFilename, but shouldn't convert everything to windows * backslashes on that platform. The current implementation of this piece * is a slightly optimised version of the various Tilde/Split/Join stuff * to avoid multiple split/join operations. * * We remove any trailing directory separator. * * However, the split/join routines are quite complex, and one has to make * sure not to break anything on Unix or Win (fCmd.test, fileName.test and * cmdAH.test exercise most of the code). */ name = Tcl_GetStringFromObj(pathPtr, &len); /* * Handle tilde substitutions, if needed. */ if (name[0] == '~') { char *expandedUser; Tcl_DString temp; int split; char separator='/'; split = FindSplitPos(name, separator); if (split != len) { /* * We have multiple pieces '~user/foo/bar...' */ name[split] = '\0'; } /* * Do some tilde substitution. */ if (name[1] == '\0') { /* * We have just '~' */ const char *dir; Tcl_DString dirString; if (split != len) { name[split] = separator; } dir = TclGetEnv("HOME", &dirString); if (dir == NULL) { if (interp) { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "couldn't find HOME environment " "variable to expand path", NULL); } return TCL_ERROR; } Tcl_DStringInit(&temp); Tcl_JoinPath(1, &dir, &temp); Tcl_DStringFree(&dirString); } else { /* * We have a user name '~user' */ Tcl_DStringInit(&temp); if (TclpGetUserHome(name+1, &temp) == NULL) { if (interp != NULL) { Tcl_ResetResult(interp); Tcl_AppendResult(interp, "user \"", name+1, "\" doesn't exist", NULL); } Tcl_DStringFree(&temp); if (split != len) { name[split] = separator; } return TCL_ERROR; } if (split != len) { name[split] = separator; } } expandedUser = Tcl_DStringValue(&temp); transPtr = Tcl_NewStringObj(expandedUser, Tcl_DStringLength(&temp)); if (split != len) { /* * Join up the tilde substitution with the rest. */ if (name[split+1] == separator) { /* * Somewhat tricky case like ~//foo/bar. Make use of * Split/Join machinery to get it right. Assumes all paths * beginning with ~ are part of the native filesystem. */ int objc; Tcl_Obj **objv; Tcl_Obj *parts = TclpNativeSplitPath(pathPtr, NULL); Tcl_ListObjGetElements(NULL, parts, &objc, &objv); /* * Skip '~'. It's replaced by its expansion. */ objc--; objv++; while (objc--) { TclpNativeJoinPath(transPtr, Tcl_GetString(*objv++)); } TclDecrRefCount(parts); } else { /* * Simple case. "rest" is relative path. Just join it. The * "rest" object will be freed when Tcl_FSJoinToPath returns * (unless something else claims a refCount on it). */ Tcl_Obj *joined; Tcl_Obj *rest = Tcl_NewStringObj(name+split+1, -1); Tcl_IncrRefCount(transPtr); joined = Tcl_FSJoinToPath(transPtr, 1, &rest); TclDecrRefCount(transPtr); transPtr = joined; } } Tcl_DStringFree(&temp); } else { transPtr = Tcl_FSJoinToPath(pathPtr, 0, NULL); } #if defined(__CYGWIN__) && defined(__WIN32__) { extern int cygwin_conv_to_win32_path(const char *, char *); char winbuf[MAX_PATH+1]; /* * In the Cygwin world, call conv_to_win32_path in order to use the * mount table to translate the file name into something Windows will * understand. Take care when converting empty strings! */ name = Tcl_GetStringFromObj(transPtr, &len); if (len > 0) { cygwin_conv_to_win32_path(name, winbuf); TclWinNoBackslash(winbuf); Tcl_SetStringObj(transPtr, winbuf, -1); } } #endif /* __CYGWIN__ && __WIN32__ */ /* * Now we have a translated filename in 'transPtr'. This will have forward * slashes on Windows, and will not contain any ~user sequences. */ fsPathPtr = (FsPath *) ckalloc(sizeof(FsPath)); fsPathPtr->translatedPathPtr = transPtr; if (transPtr != pathPtr) { Tcl_IncrRefCount(fsPathPtr->translatedPathPtr); } fsPathPtr->normPathPtr = NULL; fsPathPtr->cwdPtr = NULL; fsPathPtr->nativePathPtr = NULL; fsPathPtr->fsRecPtr = NULL; fsPathPtr->filesystemEpoch = tsdPtr->filesystemEpoch; /* * Free old representation before installing our new one. */ TclFreeIntRep(pathPtr); SETPATHOBJ(pathPtr, fsPathPtr); PATHFLAGS(pathPtr) = 0; pathPtr->typePtr = &tclFsPathType; return TCL_OK; } static void FreeFsPathInternalRep( Tcl_Obj *pathPtr) /* Path object with internal rep to free. */ { FsPath *fsPathPtr = PATHOBJ(pathPtr); if (fsPathPtr->translatedPathPtr != NULL) { if (fsPathPtr->translatedPathPtr != pathPtr) { TclDecrRefCount(fsPathPtr->translatedPathPtr); } } if (fsPathPtr->normPathPtr != NULL) { if (fsPathPtr->normPathPtr != pathPtr) { TclDecrRefCount(fsPathPtr->normPathPtr); } fsPathPtr->normPathPtr = NULL; } if (fsPathPtr->cwdPtr != NULL) { TclDecrRefCount(fsPathPtr->cwdPtr); } if (fsPathPtr->nativePathPtr != NULL && fsPathPtr->fsRecPtr != NULL) { Tcl_FSFreeInternalRepProc *freeProc = fsPathPtr->fsRecPtr->fsPtr->freeInternalRepProc; if (freeProc != NULL) { (*freeProc)(fsPathPtr->nativePathPtr); fsPathPtr->nativePathPtr = NULL; } } if (fsPathPtr->fsRecPtr != NULL) { fsPathPtr->fsRecPtr->fileRefCount--; if (fsPathPtr->fsRecPtr->fileRefCount <= 0) { /* * It has been unregistered already. */ ckfree((char *) fsPathPtr->fsRecPtr); } } ckfree((char*) fsPathPtr); } static void DupFsPathInternalRep( Tcl_Obj *srcPtr, /* Path obj with internal rep to copy. */ Tcl_Obj *copyPtr) /* Path obj with internal rep to set. */ { FsPath *srcFsPathPtr = PATHOBJ(srcPtr); FsPath *copyFsPathPtr = (FsPath *) ckalloc(sizeof(FsPath)); SETPATHOBJ(copyPtr, copyFsPathPtr); if (srcFsPathPtr->translatedPathPtr != NULL) { copyFsPathPtr->translatedPathPtr = srcFsPathPtr->translatedPathPtr; if (copyFsPathPtr->translatedPathPtr != copyPtr) { Tcl_IncrRefCount(copyFsPathPtr->translatedPathPtr); } } else { copyFsPathPtr->translatedPathPtr = NULL; } if (srcFsPathPtr->normPathPtr != NULL) { copyFsPathPtr->normPathPtr = srcFsPathPtr->normPathPtr; if (copyFsPathPtr->normPathPtr != copyPtr) { Tcl_IncrRefCount(copyFsPathPtr->normPathPtr); } } else { copyFsPathPtr->normPathPtr = NULL; } if (srcFsPathPtr->cwdPtr != NULL) { copyFsPathPtr->cwdPtr = srcFsPathPtr->cwdPtr; Tcl_IncrRefCount(copyFsPathPtr->cwdPtr); } else { copyFsPathPtr->cwdPtr = NULL; } copyFsPathPtr->flags = srcFsPathPtr->flags; if (srcFsPathPtr->fsRecPtr != NULL && srcFsPathPtr->nativePathPtr != NULL) { Tcl_FSDupInternalRepProc *dupProc = srcFsPathPtr->fsRecPtr->fsPtr->dupInternalRepProc; if (dupProc != NULL) { copyFsPathPtr->nativePathPtr = (*dupProc)(srcFsPathPtr->nativePathPtr); } else { copyFsPathPtr->nativePathPtr = NULL; } } else { copyFsPathPtr->nativePathPtr = NULL; } copyFsPathPtr->fsRecPtr = srcFsPathPtr->fsRecPtr; copyFsPathPtr->filesystemEpoch = srcFsPathPtr->filesystemEpoch; if (copyFsPathPtr->fsRecPtr != NULL) { copyFsPathPtr->fsRecPtr->fileRefCount++; } copyPtr->typePtr = &tclFsPathType; } /* *--------------------------------------------------------------------------- * * UpdateStringOfFsPath -- * * Gives an object a valid string rep. * * Results: * None. * * Side effects: * Memory may be allocated. * *--------------------------------------------------------------------------- */ static void UpdateStringOfFsPath( register Tcl_Obj *pathPtr) /* path obj with string rep to update. */ { FsPath *fsPathPtr = PATHOBJ(pathPtr); const char *cwdStr; int cwdLen; Tcl_Obj *copy; if (PATHFLAGS(pathPtr) == 0 || fsPathPtr->cwdPtr == NULL) { Tcl_Panic("Called UpdateStringOfFsPath with invalid object"); } copy = Tcl_DuplicateObj(fsPathPtr->cwdPtr); Tcl_IncrRefCount(copy); cwdStr = Tcl_GetStringFromObj(copy, &cwdLen); /* * Should we perhaps use 'Tcl_FSPathSeparator'? But then what about the * Windows special case? Perhaps we should just check if cwd is a root * volume. We should never get cwdLen == 0 in this code path. */ switch (tclPlatform) { case TCL_PLATFORM_UNIX: if (cwdStr[cwdLen-1] != '/') { Tcl_AppendToObj(copy, "/", 1); cwdLen++; } break; case TCL_PLATFORM_WINDOWS: /* * We need the extra 'cwdLen != 2', and ':' checks because a volume * relative path doesn't get a '/'. For example 'glob C:*cat*.exe' * will return 'C:cat32.exe' */ if (cwdStr[cwdLen-1] != '/' && cwdStr[cwdLen-1] != '\\') { if (cwdLen != 2 || cwdStr[1] != ':') { Tcl_AppendToObj(copy, "/", 1); cwdLen++; } } break; } Tcl_AppendObjToObj(copy, fsPathPtr->normPathPtr); pathPtr->bytes = Tcl_GetStringFromObj(copy, &cwdLen); pathPtr->length = cwdLen; copy->bytes = tclEmptyStringRep; copy->length = 0; TclDecrRefCount(copy); } /* *--------------------------------------------------------------------------- * * TclNativePathInFilesystem -- * * Any path object is acceptable to the native filesystem, by default (we * will throw errors when illegal paths are actually tried to be used). * * However, this behavior means the native filesystem must be the last * filesystem in the lookup list (otherwise it will claim all files * belong to it, and other filesystems will never get a look in). * * Results: * TCL_OK, to indicate 'yes', -1 to indicate no. * * Side effects: * None. * *--------------------------------------------------------------------------- */ int TclNativePathInFilesystem( Tcl_Obj *pathPtr, ClientData *clientDataPtr) { /* * A special case is required to handle the empty path "". This is a valid * path (i.e. the user should be able to do 'file exists ""' without * throwing an error), but equally the path doesn't exist. Those are the * semantics of Tcl (at present anyway), so we have to abide by them here. */ if (pathPtr->typePtr == &tclFsPathType) { if (pathPtr->bytes != NULL && pathPtr->bytes[0] == '\0') { /* * We reject the empty path "". */ return -1; } /* * Otherwise there is no way this path can be empty. */ } else { /* * It is somewhat unusual to reach this code path without the object * being of tclFsPathType. However, we do our best to deal with the * situation. */ int len; Tcl_GetStringFromObj(pathPtr, &len); if (len == 0) { /* * We reject the empty path "". */ return -1; } } /* * Path is of correct type, or is of non-zero length, so we accept it. */ return TCL_OK; } /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */