/* * tclUtil.c -- * * This file contains utility functions that are used by many Tcl * commands. * * Copyright (c) 1987-1993 The Regents of the University of California. * Copyright (c) 1994-1998 Sun Microsystems, Inc. * Copyright (c) 2001 by Kevin B. Kenny. All rights reserved. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tclInt.h" #include "tclParse.h" #include "tclStringTrim.h" #include "tclTomMath.h" #include /* * The absolute pathname of the executable in which this Tcl library is * running. */ static ProcessGlobalValue executableName = { 0, 0, NULL, NULL, NULL, NULL, NULL }; /* * The following values are used in the flags arguments of Tcl*Scan*Element * and Tcl*Convert*Element. The values TCL_DONT_USE_BRACES and * TCL_DONT_QUOTE_HASH are defined in tcl.h, like so: * #define TCL_DONT_USE_BRACES 1 #define TCL_DONT_QUOTE_HASH 8 * * Those are public flag bits which callers of the public routines * Tcl_Convert*Element() can use to indicate: * * TCL_DONT_USE_BRACES - 1 means the caller is insisting that brace * quoting not be used when converting the list * element. * TCL_DONT_QUOTE_HASH - 1 means the caller insists that a leading hash * character ('#') should *not* be quoted. This * is appropriate when the caller can guarantee * the element is not the first element of a * list, so [eval] cannot mis-parse the element * as a comment. * * The remaining values which can be carried by the flags of these routines * are for internal use only. Make sure they do not overlap with the public * values above. * * The Tcl*Scan*Element() routines make a determination which of 4 modes of * conversion is most appropriate for Tcl*Convert*Element() to perform, and * sets two bits of the flags value to indicate the mode selected. * * CONVERT_NONE The element needs no quoting. Its literal string is * suitable as is. * CONVERT_BRACE The conversion should be enclosing the literal string * in braces. * CONVERT_ESCAPE The conversion should be using backslashes to escape * any characters in the string that require it. * CONVERT_MASK A mask value used to extract the conversion mode from * the flags argument. * Also indicates a strange conversion mode where all * special characters are escaped with backslashes * *except for braces*. This is a strange and unnecessary * case, but it's part of the historical way in which * lists have been formatted in Tcl. To experiment with * removing this case, set the value of COMPAT to 0. * * One last flag value is used only by callers of TclScanElement(). The flag * value produced by a call to Tcl*Scan*Element() will never leave this bit * set. * * CONVERT_ANY The caller of TclScanElement() declares it can make no * promise about what public flags will be passed to the * matching call of TclConvertElement(). As such, * TclScanElement() has to determine the worst case * destination buffer length over all possibilities, and * in other cases this means an overestimate of the * required size. * * For more details, see the comments on the Tcl*Scan*Element and * Tcl*Convert*Element routines. */ #define COMPAT 1 #define CONVERT_NONE 0 #define CONVERT_BRACE 2 #define CONVERT_ESCAPE 4 #define CONVERT_MASK (CONVERT_BRACE | CONVERT_ESCAPE) #define CONVERT_ANY 16 /* * Prototypes for functions defined later in this file. */ static void ClearHash(Tcl_HashTable *tablePtr); static void FreeProcessGlobalValue(ClientData clientData); static void FreeThreadHash(ClientData clientData); static int GetEndOffsetFromObj(Tcl_Obj *objPtr, size_t endValue, Tcl_WideInt *indexPtr); static Tcl_HashTable * GetThreadHash(Tcl_ThreadDataKey *keyPtr); static int GetWideForIndex(Tcl_Interp *interp, Tcl_Obj *objPtr, size_t endValue, Tcl_WideInt *widePtr); static int FindElement(Tcl_Interp *interp, const char *string, int stringLength, const char *typeStr, const char *typeCode, const char **elementPtr, const char **nextPtr, size_t *sizePtr, int *literalPtr); /* * The following is the Tcl object type definition for an object that * represents a list index in the form, "end-offset". It is used as a * performance optimization in Tcl_GetIntForIndex. The internal rep is * stored directly in the wideValue, so no memory management is required * for it. This is a caching intrep, keeping the result of a parse * around. This type is only created from a pre-existing string, so an * updateStringProc will never be called and need not exist. The type * is unregistered, so has no need of a setFromAnyProc either. */ static const Tcl_ObjType endOffsetType = { "end-offset", /* name */ NULL, /* freeIntRepProc */ NULL, /* dupIntRepProc */ NULL, /* updateStringProc */ NULL /* setFromAnyProc */ }; /* * * STRING REPRESENTATION OF LISTS * * * * * The next several routines implement the conversions of strings to and from * Tcl lists. To understand their operation, the rules of parsing and * generating the string representation of lists must be known. Here we * describe them in one place. * * A list is made up of zero or more elements. Any string is a list if it is * made up of alternating substrings of element-separating ASCII whitespace * and properly formatted elements. * * The ASCII characters which can make up the whitespace between list elements * are: * * \u0009 \t TAB * \u000A \n NEWLINE * \u000B \v VERTICAL TAB * \u000C \f FORM FEED * \u000D \r CARRIAGE RETURN * \u0020 SPACE * * NOTE: differences between this and other places where Tcl defines a role * for "whitespace". * * * Unlike command parsing, here NEWLINE is just another whitespace * character; its role as a command terminator in a script has no * importance here. * * * Unlike command parsing, the BACKSLASH NEWLINE sequence is not * considered to be a whitespace character. * * * Other Unicode whitespace characters (recognized by [string is space] * or Tcl_UniCharIsSpace()) do not play any role as element separators * in Tcl lists. * * * The NUL byte ought not appear, as it is not in strings properly * encoded for Tcl, but if it is present, it is not treated as * separating whitespace, or a string terminator. It is just another * character in a list element. * * The interpretation of a formatted substring as a list element follows rules * similar to the parsing of the words of a command in a Tcl script. Backslash * substitution plays a key role, and is defined exactly as it is in command * parsing. The same routine, TclParseBackslash() is used in both command * parsing and list parsing. * * NOTE: This means that if and when backslash substitution rules ever change * for command parsing, the interpretation of strings as lists also changes. * * Backslash substitution replaces an "escape sequence" of one or more * characters starting with * \u005c \ BACKSLASH * with a single character. The one character escape sequence case happens only * when BACKSLASH is the last character in the string. In all other cases, the * escape sequence is at least two characters long. * * The formatted substrings are interpreted as element values according to the * following cases: * * * If the first character of a formatted substring is * \u007b { OPEN BRACE * then the end of the substring is the matching * \u007d } CLOSE BRACE * character, where matching is determined by counting nesting levels, and * not including any brace characters that are contained within a backslash * escape sequence in the nesting count. Having found the matching brace, * all characters between the braces are the string value of the element. * If no matching close brace is found before the end of the string, the * string is not a Tcl list. If the character following the close brace is * not an element separating whitespace character, or the end of the string, * then the string is not a Tcl list. * * NOTE: this differs from a brace-quoted word in the parsing of a Tcl * command only in its treatment of the backslash-newline sequence. In a * list element, the literal characters in the backslash-newline sequence * become part of the element value. In a script word, conversion to a * single SPACE character is done. * * NOTE: Most list element values can be represented by a formatted * substring using brace quoting. The exceptions are any element value that * includes an unbalanced brace not in a backslash escape sequence, and any * value that ends with a backslash not itself in a backslash escape * sequence. * * * If the first character of a formatted substring is * \u0022 " QUOTE * then the end of the substring is the next QUOTE character, not counting * any QUOTE characters that are contained within a backslash escape * sequence. If no next QUOTE is found before the end of the string, the * string is not a Tcl list. If the character following the closing QUOTE is * not an element separating whitespace character, or the end of the string, * then the string is not a Tcl list. Having found the limits of the * substring, the element value is produced by performing backslash * substitution on the character sequence between the open and close QUOTEs. * * NOTE: Any element value can be represented by this style of formatting, * given suitable choice of backslash escape sequences. * * * All other formatted substrings are terminated by the next element * separating whitespace character in the string. Having found the limits * of the substring, the element value is produced by performing backslash * substitution on it. * * NOTE: Any element value can be represented by this style of formatting, * given suitable choice of backslash escape sequences, with one exception. * The empty string cannot be represented as a list element without the use * of either braces or quotes to delimit it. * * This collection of parsing rules is implemented in the routine * FindElement(). * * In order to produce lists that can be parsed by these rules, we need the * ability to distinguish between characters that are part of a list element * value from characters providing syntax that define the structure of the * list. This means that our code that generates lists must at a minimum be * able to produce escape sequences for the 10 characters identified above * that have significance to a list parser. * * * * CANONICAL LISTS * * * * * * * In addition to the basic rules for parsing strings into Tcl lists, there * are additional properties to be met by the set of list values that are * generated by Tcl. Such list values are often said to be in "canonical * form": * * * When any canonical list is evaluated as a Tcl script, it is a script of * either zero commands (an empty list) or exactly one command. The command * word is exactly the first element of the list, and each argument word is * exactly one of the following elements of the list. This means that any * characters that have special meaning during script evaluation need * special treatment when canonical lists are produced: * * * Whitespace between elements may not include NEWLINE. * * The command terminating character, * \u003b ; SEMICOLON * must be BRACEd, QUOTEd, or escaped so that it does not terminate the * command prematurely. * * Any of the characters that begin substitutions in scripts, * \u0024 $ DOLLAR * \u005b [ OPEN BRACKET * \u005c \ BACKSLASH * need to be BRACEd or escaped. * * In any list where the first character of the first element is * \u0023 # HASH * that HASH character must be BRACEd, QUOTEd, or escaped so that it * does not convert the command into a comment. * * Any list element that contains the character sequence BACKSLASH * NEWLINE cannot be formatted with BRACEs. The BACKSLASH character * must be represented by an escape sequence, and unless QUOTEs are * used, the NEWLINE must be as well. * * * It is also guaranteed that one can use a canonical list as a building * block of a larger script within command substitution, as in this example: * set script "puts \[[list $cmd $arg]]"; eval $script * To support this usage, any appearance of the character * \u005d ] CLOSE BRACKET * in a list element must be BRACEd, QUOTEd, or escaped. * * * Finally it is guaranteed that enclosing a canonical list in braces * produces a new value that is also a canonical list. This new list has * length 1, and its only element is the original canonical list. This same * guarantee also makes it possible to construct scripts where an argument * word is given a list value by enclosing the canonical form of that list * in braces: * set script "puts {[list $one $two $three]}"; eval $script * This sort of coding was once fairly common, though it's become more * idiomatic to see the following instead: * set script [list puts [list $one $two $three]]; eval $script * In order to support this guarantee, every canonical list must have * balance when counting those braces that are not in escape sequences. * * Within these constraints, the canonical list generation routines * TclScanElement() and TclConvertElement() attempt to generate the string for * any list that is easiest to read. When an element value is itself * acceptable as the formatted substring, it is usually used (CONVERT_NONE). * When some quoting or escaping is required, use of BRACEs (CONVERT_BRACE) is * usually preferred over the use of escape sequences (CONVERT_ESCAPE). There * are some exceptions to both of these preferences for reasons of code * simplicity, efficiency, and continuation of historical habits. Canonical * lists never use the QUOTE formatting to delimit their elements because that * form of quoting does not nest, which makes construction of nested lists far * too much trouble. Canonical lists always use only a single SPACE character * for element-separating whitespace. * * * * FUTURE CONSIDERATIONS * * * * * When a list element requires quoting or escaping due to a CLOSE BRACKET * character or an internal QUOTE character, a strange formatting mode is * recommended. For example, if the value "a{b]c}d" is converted by the usual * modes: * * CONVERT_BRACE: a{b]c}d => {a{b]c}d} * CONVERT_ESCAPE: a{b]c}d => a\{b\]c\}d * * we get perfectly usable formatted list elements. However, this is not what * Tcl releases have been producing. Instead, we have: * * CONVERT_MASK: a{b]c}d => a{b\]c}d * * where the CLOSE BRACKET is escaped, but the BRACEs are not. The same effect * can be seen replacing ] with " in this example. There does not appear to be * any functional or aesthetic purpose for this strange additional mode. The * sole purpose I can see for preserving it is to keep generating the same * formatted lists programmers have become accustomed to, and perhaps written * tests to expect. That is, compatibility only. The additional code * complexity required to support this mode is significant. The lines of code * supporting it are delimited in the routines below with #if COMPAT * directives. This makes it easy to experiment with eliminating this * formatting mode simply with "#define COMPAT 0" above. I believe this is * worth considering. * * Another consideration is the treatment of QUOTE characters in list * elements. TclConvertElement() must have the ability to produce the escape * sequence \" so that when a list element begins with a QUOTE we do not * confuse that first character with a QUOTE used as list syntax to define * list structure. However, that is the only place where QUOTE characters need * quoting. In this way, handling QUOTE could really be much more like the way * we handle HASH which also needs quoting and escaping only in particular * situations. Following up this could increase the set of list elements that * can use the CONVERT_NONE formatting mode. * * More speculative is that the demands of canonical list form require brace * balance for the list as a whole, while the current implementation achieves * this by establishing brace balance for every element. * * Finally, a reminder that the rules for parsing and formatting lists are * closely tied together with the rules for parsing and evaluating scripts, * and will need to evolve in sync. */ /* *---------------------------------------------------------------------- * * TclMaxListLength -- * * Given 'bytes' pointing to 'numBytes' bytes, scan through them and * count the number of whitespace runs that could be list element * separators. If 'numBytes' is -1, scan to the terminating '\0'. Not a * full list parser. Typically used to get a quick and dirty overestimate * of length size in order to allocate space for an actual list parser to * operate with. * * Results: * Returns the largest number of list elements that could possibly be in * this string, interpreted as a Tcl list. If 'endPtr' is not NULL, * writes a pointer to the end of the string scanned there. * * Side effects: * None. * *---------------------------------------------------------------------- */ int TclMaxListLength( const char *bytes, size_t numBytes, const char **endPtr) { size_t count = 0; if ((numBytes == 0) || ((numBytes == TCL_AUTO_LENGTH) && (*bytes == '\0'))) { /* Empty string case - quick exit */ goto done; } /* * No list element before leading white space. */ count += 1 - TclIsSpaceProc(*bytes); /* * Count white space runs as potential element separators. */ while (numBytes) { if ((numBytes == TCL_AUTO_LENGTH) && (*bytes == '\0')) { break; } if (TclIsSpaceProc(*bytes)) { /* * Space run started; bump count. */ count++; do { bytes++; numBytes -= (numBytes != TCL_AUTO_LENGTH); } while (numBytes && TclIsSpaceProc(*bytes)); if ((numBytes == 0) || ((numBytes == TCL_AUTO_LENGTH) && (*bytes == '\0'))) { break; } /* * (*bytes) is non-space; return to counting state. */ } bytes++; numBytes -= (numBytes != TCL_AUTO_LENGTH); } /* * No list element following trailing white space. */ count -= TclIsSpaceProc(bytes[-1]); done: if (endPtr) { *endPtr = bytes; } return count; } /* *---------------------------------------------------------------------- * * TclFindElement -- * * Given a pointer into a Tcl list, locate the first (or next) element in * the list. * * Results: * The return value is normally TCL_OK, which means that the element was * successfully located. If TCL_ERROR is returned it means that list * didn't have proper list structure; the interp's result contains a more * detailed error message. * * If TCL_OK is returned, then *elementPtr will be set to point to the * first element of list, and *nextPtr will be set to point to the * character just after any white space following the last character * that's part of the element. If this is the last argument in the list, * then *nextPtr will point just after the last character in the list * (i.e., at the character at list+listLength). If sizePtr is non-NULL, * *sizePtr is filled in with the number of bytes in the element. If the * element is in braces, then *elementPtr will point to the character * after the opening brace and *sizePtr will not include either of the * braces. If there isn't an element in the list, *sizePtr will be zero, * and both *elementPtr and *nextPtr will point just after the last * character in the list. If literalPtr is non-NULL, *literalPtr is set * to a boolean value indicating whether the substring returned as the * values of **elementPtr and *sizePtr is the literal value of a list * element. If not, a call to TclCopyAndCollapse() is needed to produce * the actual value of the list element. Note: this function does NOT * collapse backslash sequences, but uses *literalPtr to tell callers * when it is required for them to do so. * * Side effects: * None. * *---------------------------------------------------------------------- */ int TclFindElement( Tcl_Interp *interp, /* Interpreter to use for error reporting. If * NULL, then no error message is left after * errors. */ const char *list, /* Points to the first byte of a string * containing a Tcl list with zero or more * elements (possibly in braces). */ int listLength, /* Number of bytes in the list's string. */ const char **elementPtr, /* Where to put address of first significant * character in first element of list. */ const char **nextPtr, /* Fill in with location of character just * after all white space following end of * argument (next arg or end of list). */ size_t *sizePtr, /* If non-zero, fill in with size of * element. */ int *literalPtr) /* If non-zero, fill in with non-zero/zero to * indicate that the substring of *sizePtr * bytes starting at **elementPtr is/is not * the literal list element and therefore * does not/does require a call to * TclCopyAndCollapse() by the caller. */ { return FindElement(interp, list, listLength, "list", "LIST", elementPtr, nextPtr, sizePtr, literalPtr); } int TclFindDictElement( Tcl_Interp *interp, /* Interpreter to use for error reporting. If * NULL, then no error message is left after * errors. */ const char *dict, /* Points to the first byte of a string * containing a Tcl dictionary with zero or * more keys and values (possibly in * braces). */ int dictLength, /* Number of bytes in the dict's string. */ const char **elementPtr, /* Where to put address of first significant * character in the first element (i.e., key * or value) of dict. */ const char **nextPtr, /* Fill in with location of character just * after all white space following end of * element (next arg or end of list). */ size_t *sizePtr, /* If non-zero, fill in with size of * element. */ int *literalPtr) /* If non-zero, fill in with non-zero/zero to * indicate that the substring of *sizePtr * bytes starting at **elementPtr is/is not * the literal key or value and therefore * does not/does require a call to * TclCopyAndCollapse() by the caller. */ { return FindElement(interp, dict, dictLength, "dict", "DICTIONARY", elementPtr, nextPtr, sizePtr, literalPtr); } static int FindElement( Tcl_Interp *interp, /* Interpreter to use for error reporting. If * NULL, then no error message is left after * errors. */ const char *string, /* Points to the first byte of a string * containing a Tcl list or dictionary with * zero or more elements (possibly in * braces). */ int stringLength, /* Number of bytes in the string. */ const char *typeStr, /* The name of the type of thing we are * parsing, for error messages. */ const char *typeCode, /* The type code for thing we are parsing, for * error messages. */ const char **elementPtr, /* Where to put address of first significant * character in first element. */ const char **nextPtr, /* Fill in with location of character just * after all white space following end of * argument (next arg or end of list/dict). */ size_t *sizePtr, /* If non-zero, fill in with size of * element. */ int *literalPtr) /* If non-zero, fill in with non-zero/zero to * indicate that the substring of *sizePtr * bytes starting at **elementPtr is/is not * the literal list/dict element and therefore * does not/does require a call to * TclCopyAndCollapse() by the caller. */ { const char *p = string; const char *elemStart; /* Points to first byte of first element. */ const char *limit; /* Points just after list/dict's last byte. */ int openBraces = 0; /* Brace nesting level during parse. */ int inQuotes = 0; int size = 0; /* lint. */ size_t numChars; int literal = 1; const char *p2; /* * Skim off leading white space and check for an opening brace or quote. * We treat embedded NULLs in the list/dict as bytes belonging to a list * element (or dictionary key or value). */ limit = (string + stringLength); while ((p < limit) && (TclIsSpaceProc(*p))) { p++; } if (p == limit) { /* no element found */ elemStart = limit; goto done; } if (*p == '{') { openBraces = 1; p++; } else if (*p == '"') { inQuotes = 1; p++; } elemStart = p; /* * Find element's end (a space, close brace, or the end of the string). */ while (p < limit) { switch (*p) { /* * Open brace: don't treat specially unless the element is in * braces. In this case, keep a nesting count. */ case '{': if (openBraces != 0) { openBraces++; } break; /* * Close brace: if element is in braces, keep nesting count and * quit when the last close brace is seen. */ case '}': if (openBraces > 1) { openBraces--; } else if (openBraces == 1) { size = (p - elemStart); p++; if ((p >= limit) || TclIsSpaceProc(*p)) { goto done; } /* * Garbage after the closing brace; return an error. */ if (interp != NULL) { p2 = p; while ((p2 < limit) && (!TclIsSpaceProc(*p2)) && (p2 < p+20)) { p2++; } Tcl_SetObjResult(interp, Tcl_ObjPrintf( "%s element in braces followed by \"%.*s\" " "instead of space", typeStr, (int) (p2-p), p)); Tcl_SetErrorCode(interp, "TCL", "VALUE", typeCode, "JUNK", NULL); } return TCL_ERROR; } break; /* * Backslash: skip over everything up to the end of the backslash * sequence. */ case '\\': if (openBraces == 0) { /* * A backslash sequence not within a brace quoted element * means the value of the element is different from the * substring we are parsing. A call to TclCopyAndCollapse() is * needed to produce the element value. Inform the caller. */ literal = 0; } TclParseBackslash(p, limit - p, &numChars, NULL); p += (numChars - 1); break; /* * Space: ignore if element is in braces or quotes; otherwise * terminate element. */ case ' ': case '\f': case '\n': case '\r': case '\t': case '\v': if ((openBraces == 0) && !inQuotes) { size = (p - elemStart); goto done; } break; /* * Double-quote: if element is in quotes then terminate it. */ case '"': if (inQuotes) { size = (p - elemStart); p++; if ((p >= limit) || TclIsSpaceProc(*p)) { goto done; } /* * Garbage after the closing quote; return an error. */ if (interp != NULL) { p2 = p; while ((p2 < limit) && (!TclIsSpaceProc(*p2)) && (p2 < p+20)) { p2++; } Tcl_SetObjResult(interp, Tcl_ObjPrintf( "%s element in quotes followed by \"%.*s\" " "instead of space", typeStr, (int) (p2-p), p)); Tcl_SetErrorCode(interp, "TCL", "VALUE", typeCode, "JUNK", NULL); } return TCL_ERROR; } break; } p++; } /* * End of list/dict: terminate element. */ if (p == limit) { if (openBraces != 0) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "unmatched open brace in %s", typeStr)); Tcl_SetErrorCode(interp, "TCL", "VALUE", typeCode, "BRACE", NULL); } return TCL_ERROR; } else if (inQuotes) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "unmatched open quote in %s", typeStr)); Tcl_SetErrorCode(interp, "TCL", "VALUE", typeCode, "QUOTE", NULL); } return TCL_ERROR; } size = (p - elemStart); } done: while ((p < limit) && (TclIsSpaceProc(*p))) { p++; } *elementPtr = elemStart; *nextPtr = p; if (sizePtr != 0) { *sizePtr = size; } if (literalPtr != 0) { *literalPtr = literal; } return TCL_OK; } /* *---------------------------------------------------------------------- * * TclCopyAndCollapse -- * * Copy a string and substitute all backslash escape sequences * * Results: * Count bytes get copied from src to dst. Along the way, backslash * sequences are substituted in the copy. After scanning count bytes from * src, a null character is placed at the end of dst. Returns the number * of bytes that got written to dst. * * Side effects: * None. * *---------------------------------------------------------------------- */ size_t TclCopyAndCollapse( size_t count, /* Number of byte to copy from src. */ const char *src, /* Copy from here... */ char *dst) /* ... to here. */ { size_t newCount = 0; while (count > 0) { char c = *src; if (c == '\\') { size_t numRead; size_t backslashCount = TclParseBackslash(src, count, &numRead, dst); dst += backslashCount; newCount += backslashCount; src += numRead; count -= numRead; } else { *dst = c; dst++; newCount++; src++; count--; } } *dst = 0; return newCount; } /* *---------------------------------------------------------------------- * * Tcl_SplitList -- * * Splits a list up into its constituent fields. * * Results * The return value is normally TCL_OK, which means that the list was * successfully split up. If TCL_ERROR is returned, it means that "list" * didn't have proper list structure; the interp's result will contain a * more detailed error message. * * *argvPtr will be filled in with the address of an array whose elements * point to the elements of list, in order. *argcPtr will get filled in * with the number of valid elements in the array. A single block of * memory is dynamically allocated to hold both the argv array and a copy * of the list (with backslashes and braces removed in the standard way). * The caller must eventually free this memory by calling free() on * *argvPtr. Note: *argvPtr and *argcPtr are only modified if the * function returns normally. * * Side effects: * Memory is allocated. * *---------------------------------------------------------------------- */ int Tcl_SplitList( Tcl_Interp *interp, /* Interpreter to use for error reporting. If * NULL, no error message is left. */ const char *list, /* Pointer to string with list structure. */ int *argcPtr, /* Pointer to location to fill in with the * number of elements in the list. */ const char ***argvPtr) /* Pointer to place to store pointer to array * of pointers to list elements. */ { const char **argv, *end, *element; char *p; int length, size, i, result; size_t elSize; /* * Allocate enough space to work in. A (const char *) for each (possible) * list element plus one more for terminating NULL, plus as many bytes as * in the original string value, plus one more for a terminating '\0'. * Space used to hold element separating white space in the original * string gets re-purposed to hold '\0' characters in the argv array. */ size = TclMaxListLength(list, -1, &end) + 1; length = end - list; argv = Tcl_Alloc((size * sizeof(char *)) + length + 1); for (i = 0, p = ((char *) argv) + size*sizeof(char *); *list != 0; i++) { const char *prevList = list; int literal; result = TclFindElement(interp, list, length, &element, &list, &elSize, &literal); length -= (list - prevList); if (result != TCL_OK) { Tcl_Free((void *)argv); return result; } if (*element == 0) { break; } if (i >= size) { Tcl_Free((void *)argv); if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_NewStringObj( "internal error in Tcl_SplitList", -1)); Tcl_SetErrorCode(interp, "TCL", "INTERNAL", "Tcl_SplitList", NULL); } return TCL_ERROR; } argv[i] = p; if (literal) { memcpy(p, element, elSize); p += elSize; *p = 0; p++; } else { p += 1 + TclCopyAndCollapse(elSize, element, p); } } argv[i] = NULL; *argvPtr = argv; *argcPtr = i; return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_ScanElement -- * * This function is a companion function to Tcl_ConvertElement. It scans * a string to see what needs to be done to it (e.g. add backslashes or * enclosing braces) to make the string into a valid Tcl list element. * * Results: * The return value is an overestimate of the number of bytes that will * be needed by Tcl_ConvertElement to produce a valid list element from * src. The word at *flagPtr is filled in with a value needed by * Tcl_ConvertElement when doing the actual conversion. * * Side effects: * None. * *---------------------------------------------------------------------- */ size_t Tcl_ScanElement( const char *src, /* String to convert to list element. */ int *flagPtr) /* Where to store information to guide * Tcl_ConvertCountedElement. */ { return Tcl_ScanCountedElement(src, -1, flagPtr); } /* *---------------------------------------------------------------------- * * Tcl_ScanCountedElement -- * * This function is a companion function to Tcl_ConvertCountedElement. It * scans a string to see what needs to be done to it (e.g. add * backslashes or enclosing braces) to make the string into a valid Tcl * list element. If length is -1, then the string is scanned from src up * to the first null byte. * * Results: * The return value is an overestimate of the number of bytes that will * be needed by Tcl_ConvertCountedElement to produce a valid list element * from src. The word at *flagPtr is filled in with a value needed by * Tcl_ConvertCountedElement when doing the actual conversion. * * Side effects: * None. * *---------------------------------------------------------------------- */ size_t Tcl_ScanCountedElement( const char *src, /* String to convert to Tcl list element. */ size_t length, /* Number of bytes in src, or -1. */ int *flagPtr) /* Where to store information to guide * Tcl_ConvertElement. */ { char flags = CONVERT_ANY; int numBytes = TclScanElement(src, length, &flags); *flagPtr = flags; return numBytes; } /* *---------------------------------------------------------------------- * * TclScanElement -- * * This function is a companion function to TclConvertElement. It scans a * string to see what needs to be done to it (e.g. add backslashes or * enclosing braces) to make the string into a valid Tcl list element. If * length is -1, then the string is scanned from src up to the first null * byte. A NULL value for src is treated as an empty string. The incoming * value of *flagPtr is a report from the caller what additional flags it * will pass to TclConvertElement(). * * Results: * The recommended formatting mode for the element is determined and a * value is written to *flagPtr indicating that recommendation. This * recommendation is combined with the incoming flag values in *flagPtr * set by the caller to determine how many bytes will be needed by * TclConvertElement() in which to write the formatted element following * the recommendation modified by the flag values. This number of bytes * is the return value of the routine. In some situations it may be an * overestimate, but so long as the caller passes the same flags to * TclConvertElement(), it will be large enough. * * Side effects: * None. * *---------------------------------------------------------------------- */ size_t TclScanElement( const char *src, /* String to convert to Tcl list element. */ size_t length, /* Number of bytes in src, or -1. */ char *flagPtr) /* Where to store information to guide * Tcl_ConvertElement. */ { const char *p = src; int nestingLevel = 0; /* Brace nesting count */ int forbidNone = 0; /* Do not permit CONVERT_NONE mode. Something * needs protection or escape. */ int requireEscape = 0; /* Force use of CONVERT_ESCAPE mode. For some * reason bare or brace-quoted form fails. */ int extra = 0; /* Count of number of extra bytes needed for * formatted element, assuming we use escape * sequences in formatting. */ size_t bytesNeeded; /* Buffer length computed to complete the * element formatting in the selected mode. */ #if COMPAT int preferEscape = 0; /* Use preferences to track whether to use */ int preferBrace = 0; /* CONVERT_MASK mode. */ int braceCount = 0; /* Count of all braces '{' '}' seen. */ #endif /* COMPAT */ if ((p == NULL) || (length == 0) || ((*p == '\0') && (length == TCL_AUTO_LENGTH))) { /* * Empty string element must be brace quoted. */ *flagPtr = CONVERT_BRACE; return 2; } #if COMPAT /* * We have an established history in TclConvertElement() when quoting * because of a leading hash character to force what would be the * CONVERT_MASK mode into the CONVERT_BRACE mode. That is, we format * the element #{a"b} like this: * {#{a"b}} * and not like this: * \#{a\"b} * This is inconsistent with [list x{a"b}], but we will not change that now. * Set that preference here so that we compute a tight size requirement. */ if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { preferBrace = 1; } #endif if ((*p == '{') || (*p == '"')) { /* * Must escape or protect so leading character of value is not * misinterpreted as list element delimiting syntax. */ forbidNone = 1; #if COMPAT preferBrace = 1; #endif /* COMPAT */ } while (length) { if (CHAR_TYPE(*p) != TYPE_NORMAL) { switch (*p) { case '{': /* TYPE_BRACE */ #if COMPAT braceCount++; #endif /* COMPAT */ extra++; /* Escape '{' => '\{' */ nestingLevel++; break; case '}': /* TYPE_BRACE */ #if COMPAT braceCount++; #endif /* COMPAT */ extra++; /* Escape '}' => '\}' */ nestingLevel--; if (nestingLevel < 0) { /* * Unbalanced braces! Cannot format with brace quoting. */ requireEscape = 1; } break; case ']': /* TYPE_CLOSE_BRACK */ case '"': /* TYPE_SPACE */ #if COMPAT forbidNone = 1; extra++; /* Escapes all just prepend a backslash */ preferEscape = 1; break; #else /* FLOW THROUGH */ #endif /* COMPAT */ case '[': /* TYPE_SUBS */ case '$': /* TYPE_SUBS */ case ';': /* TYPE_COMMAND_END */ case ' ': /* TYPE_SPACE */ case '\f': /* TYPE_SPACE */ case '\n': /* TYPE_COMMAND_END */ case '\r': /* TYPE_SPACE */ case '\t': /* TYPE_SPACE */ case '\v': /* TYPE_SPACE */ forbidNone = 1; extra++; /* Escape sequences all one byte longer. */ #if COMPAT preferBrace = 1; #endif /* COMPAT */ break; case '\\': /* TYPE_SUBS */ extra++; /* Escape '\' => '\\' */ if ((length == 1) || ((length == TCL_AUTO_LENGTH) && (p[1] == '\0'))) { /* * Final backslash. Cannot format with brace quoting. */ requireEscape = 1; break; } if (p[1] == '\n') { extra++; /* Escape newline => '\n', one byte longer */ /* * Backslash newline sequence. Brace quoting not permitted. */ requireEscape = 1; length -= (length > 0); p++; break; } if ((p[1] == '{') || (p[1] == '}') || (p[1] == '\\')) { extra++; /* Escape sequences all one byte longer. */ length -= (length > 0); p++; } forbidNone = 1; #if COMPAT preferBrace = 1; #endif /* COMPAT */ break; case '\0': /* TYPE_SUBS */ if (length == TCL_AUTO_LENGTH) { goto endOfString; } /* TODO: Panic on improper encoding? */ break; } } length -= (length+1 > 1); p++; } endOfString: if (nestingLevel != 0) { /* * Unbalanced braces! Cannot format with brace quoting. */ requireEscape = 1; } /* * We need at least as many bytes as are in the element value... */ bytesNeeded = p - src; if (requireEscape) { /* * We must use escape sequences. Add all the extra bytes needed to * have room to create them. */ bytesNeeded += extra; /* * Make room to escape leading #, if needed. */ if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { bytesNeeded++; } *flagPtr = CONVERT_ESCAPE; return bytesNeeded; } if (*flagPtr & CONVERT_ANY) { /* * The caller has not let us know what flags it will pass to * TclConvertElement() so compute the max size we might need for any * possible choice. Normally the formatting using escape sequences is * the longer one, and a minimum "extra" value of 2 makes sure we * don't request too small a buffer in those edge cases where that's * not true. */ if (extra < 2) { extra = 2; } *flagPtr &= ~CONVERT_ANY; *flagPtr |= TCL_DONT_USE_BRACES; } if (forbidNone) { /* * We must request some form of quoting of escaping... */ #if COMPAT if (preferEscape && !preferBrace) { /* * If we are quoting solely due to ] or internal " characters use * the CONVERT_MASK mode where we escape all special characters * except for braces. "extra" counted space needed to escape * braces too, so substract "braceCount" to get our actual needs. */ bytesNeeded += (extra - braceCount); /* Make room to escape leading #, if needed. */ if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { bytesNeeded++; } /* * If the caller reports it will direct TclConvertElement() to * use full escapes on the element, add back the bytes needed to * escape the braces. */ if (*flagPtr & TCL_DONT_USE_BRACES) { bytesNeeded += braceCount; } *flagPtr = CONVERT_MASK; return bytesNeeded; } #endif /* COMPAT */ if (*flagPtr & TCL_DONT_USE_BRACES) { /* * If the caller reports it will direct TclConvertElement() to * use escapes, add the extra bytes needed to have room for them. */ bytesNeeded += extra; /* * Make room to escape leading #, if needed. */ if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { bytesNeeded++; } } else { /* * Add 2 bytes for room for the enclosing braces. */ bytesNeeded += 2; } *flagPtr = CONVERT_BRACE; return bytesNeeded; } /* * So far, no need to quote or escape anything. */ if ((*src == '#') && !(*flagPtr & TCL_DONT_QUOTE_HASH)) { /* * If we need to quote a leading #, make room to enclose in braces. */ bytesNeeded += 2; } *flagPtr = CONVERT_NONE; return bytesNeeded; } /* *---------------------------------------------------------------------- * * Tcl_ConvertElement -- * * This is a companion function to Tcl_ScanElement. Given the information * produced by Tcl_ScanElement, this function converts a string to a list * element equal to that string. * * Results: * Information is copied to *dst in the form of a list element identical * to src (i.e. if Tcl_SplitList is applied to dst it will produce a * string identical to src). The return value is a count of the number of * characters copied (not including the terminating NULL character). * * Side effects: * None. * *---------------------------------------------------------------------- */ size_t Tcl_ConvertElement( const char *src, /* Source information for list element. */ char *dst, /* Place to put list-ified element. */ int flags) /* Flags produced by Tcl_ScanElement. */ { return Tcl_ConvertCountedElement(src, -1, dst, flags); } /* *---------------------------------------------------------------------- * * Tcl_ConvertCountedElement -- * * This is a companion function to Tcl_ScanCountedElement. Given the * information produced by Tcl_ScanCountedElement, this function converts * a string to a list element equal to that string. * * Results: * Information is copied to *dst in the form of a list element identical * to src (i.e. if Tcl_SplitList is applied to dst it will produce a * string identical to src). The return value is a count of the number of * characters copied (not including the terminating NULL character). * * Side effects: * None. * *---------------------------------------------------------------------- */ size_t Tcl_ConvertCountedElement( const char *src, /* Source information for list element. */ size_t length, /* Number of bytes in src, or -1. */ char *dst, /* Place to put list-ified element. */ int flags) /* Flags produced by Tcl_ScanElement. */ { size_t numBytes = TclConvertElement(src, length, dst, flags); dst[numBytes] = '\0'; return numBytes; } /* *---------------------------------------------------------------------- * * TclConvertElement -- * * This is a companion function to TclScanElement. Given the information * produced by TclScanElement, this function converts a string to a list * element equal to that string. * * Results: * Information is copied to *dst in the form of a list element identical * to src (i.e. if Tcl_SplitList is applied to dst it will produce a * string identical to src). The return value is a count of the number of * characters copied (not including the terminating NULL character). * * Side effects: * None. * *---------------------------------------------------------------------- */ size_t TclConvertElement( const char *src, /* Source information for list element. */ size_t length, /* Number of bytes in src, or -1. */ char *dst, /* Place to put list-ified element. */ int flags) /* Flags produced by Tcl_ScanElement. */ { int conversion = flags & CONVERT_MASK; char *p = dst; /* * Let the caller demand we use escape sequences rather than braces. */ if ((flags & TCL_DONT_USE_BRACES) && (conversion & CONVERT_BRACE)) { conversion = CONVERT_ESCAPE; } /* * No matter what the caller demands, empty string must be braced! */ if ((src == NULL) || (length == 0) || (*src == '\0' && length == TCL_AUTO_LENGTH)) { p[0] = '{'; p[1] = '}'; return 2; } /* * Escape leading hash as needed and requested. */ if ((*src == '#') && !(flags & TCL_DONT_QUOTE_HASH)) { if (conversion == CONVERT_ESCAPE) { p[0] = '\\'; p[1] = '#'; p += 2; src++; length -= (length+1 > 1); } else { conversion = CONVERT_BRACE; } } /* * No escape or quoting needed. Copy the literal string value. */ if (conversion == CONVERT_NONE) { if (length == TCL_AUTO_LENGTH) { /* TODO: INT_MAX overflow? */ while (*src) { *p++ = *src++; } return p - dst; } else { memcpy(dst, src, length); return length; } } /* * Formatted string is original string enclosed in braces. */ if (conversion == CONVERT_BRACE) { *p = '{'; p++; if (length == TCL_AUTO_LENGTH) { /* TODO: INT_MAX overflow? */ while (*src) { *p++ = *src++; } } else { memcpy(p, src, length); p += length; } *p = '}'; p++; return (size_t)(p - dst); } /* conversion == CONVERT_ESCAPE or CONVERT_MASK */ /* * Formatted string is original string converted to escape sequences. */ for ( ; length; src++, length -= (length+1 > 1)) { switch (*src) { case ']': case '[': case '$': case ';': case ' ': case '\\': case '"': *p = '\\'; p++; break; case '{': case '}': #if COMPAT if (conversion == CONVERT_ESCAPE) #endif /* COMPAT */ { *p = '\\'; p++; } break; case '\f': *p = '\\'; p++; *p = 'f'; p++; continue; case '\n': *p = '\\'; p++; *p = 'n'; p++; continue; case '\r': *p = '\\'; p++; *p = 'r'; p++; continue; case '\t': *p = '\\'; p++; *p = 't'; p++; continue; case '\v': *p = '\\'; p++; *p = 'v'; p++; continue; case '\0': if (length == TCL_AUTO_LENGTH) { return (size_t)(p - dst); } /* * If we reach this point, there's an embedded NULL in the string * range being processed, which should not happen when the * encoding rules for Tcl strings are properly followed. If the * day ever comes when we stop tolerating such things, this is * where to put the Tcl_Panic(). */ break; } *p = *src; p++; } return (size_t)(p - dst); } /* *---------------------------------------------------------------------- * * Tcl_Merge -- * * Given a collection of strings, merge them together into a single * string that has proper Tcl list structured (i.e. Tcl_SplitList may be * used to retrieve strings equal to the original elements, and Tcl_Eval * will parse the string back into its original elements). * * Results: * The return value is the address of a dynamically-allocated string * containing the merged list. * * Side effects: * None. * *---------------------------------------------------------------------- */ char * Tcl_Merge( int argc, /* How many strings to merge. */ const char *const *argv) /* Array of string values. */ { #define LOCAL_SIZE 64 char localFlags[LOCAL_SIZE], *flagPtr = NULL; int i; size_t bytesNeeded = 0; char *result, *dst; /* * Handle empty list case first, so logic of the general case can be * simpler. */ if (argc == 0) { result = Tcl_Alloc(1); result[0] = '\0'; return result; } /* * Pass 1: estimate space, gather flags. */ if (argc <= LOCAL_SIZE) { flagPtr = localFlags; } else { flagPtr = Tcl_Alloc(argc); } for (i = 0; i < argc; i++) { flagPtr[i] = ( i ? TCL_DONT_QUOTE_HASH : 0 ); bytesNeeded += TclScanElement(argv[i], -1, &flagPtr[i]); } bytesNeeded += argc; /* * Pass two: copy into the result area. */ result = Tcl_Alloc(bytesNeeded); dst = result; for (i = 0; i < argc; i++) { flagPtr[i] |= ( i ? TCL_DONT_QUOTE_HASH : 0 ); dst += TclConvertElement(argv[i], -1, dst, flagPtr[i]); *dst = ' '; dst++; } dst[-1] = 0; if (flagPtr != localFlags) { Tcl_Free(flagPtr); } return result; } /* *---------------------------------------------------------------------- * * UtfWellFormedEnd -- * Checks the end of utf string is malformed, if yes - wraps bytes * to the given buffer (as well-formed NTS string). The buffer * argument should be initialized by the caller and ready to use. * * Results: * The bytes with well-formed end of the string. * * Side effects: * Buffer (DString) may be allocated, so must be released. * *---------------------------------------------------------------------- */ static inline const char* UtfWellFormedEnd( Tcl_DString *buffer, /* Buffer used to hold well-formed string. */ const char *bytes, /* Pointer to the beginning of the string. */ int length) /* Length of the string. */ { const char *l = bytes + length; const char *p = Tcl_UtfPrev(l, bytes); if (Tcl_UtfCharComplete(p, l - p)) { return bytes; } /* * Malformed utf-8 end, be sure we've NTS to safe compare of end-character, * avoid segfault by access violation out of range. */ Tcl_DStringAppend(buffer, bytes, length); return Tcl_DStringValue(buffer); } /* *---------------------------------------------------------------------- * * TclTrimRight -- * Takes two counted strings in the Tcl encoding. Conceptually * finds the sub string (offset) to trim from the right side of the * first string all characters found in the second string. * * Results: * The number of bytes to be removed from the end of the string. * * Side effects: * None. * *---------------------------------------------------------------------- */ static inline size_t TrimRight( const char *bytes, /* String to be trimmed... */ size_t numBytes, /* ...and its length in bytes */ const char *trim, /* String of trim characters... */ size_t numTrim) /* ...and its length in bytes */ { const char *p = bytes + numBytes; size_t pInc; Tcl_UniChar ch1 = 0, ch2 = 0; /* * Outer loop: iterate over string to be trimmed. */ do { const char *q = trim; size_t bytesLeft = numTrim; p = Tcl_UtfPrev(p, bytes); pInc = TclUtfToUniChar(p, &ch1); /* * Inner loop: scan trim string for match to current character. */ do { size_t qInc = TclUtfToUniChar(q, &ch2); if (ch1 == ch2) { break; } q += qInc; bytesLeft -= qInc; } while (bytesLeft); if (bytesLeft == 0) { /* * No match; trim task done; *p is last non-trimmed char. */ p += pInc; break; } } while (p > bytes); return numBytes - (p - bytes); } size_t TclTrimRight( const char *bytes, /* String to be trimmed... */ size_t numBytes, /* ...and its length in bytes */ const char *trim, /* String of trim characters... */ size_t numTrim) /* ...and its length in bytes */ { size_t res; Tcl_DString bytesBuf, trimBuf; /* Empty strings -> nothing to do */ if ((numBytes == 0) || (numTrim == 0)) { return 0; } Tcl_DStringInit(&bytesBuf); Tcl_DStringInit(&trimBuf); bytes = UtfWellFormedEnd(&bytesBuf, bytes, numBytes); trim = UtfWellFormedEnd(&trimBuf, trim, numTrim); res = TrimRight(bytes, numBytes, trim, numTrim); if (res > numBytes) { res = numBytes; } Tcl_DStringFree(&bytesBuf); Tcl_DStringFree(&trimBuf); return res; } /* *---------------------------------------------------------------------- * * TclTrimLeft -- * * Takes two counted strings in the Tcl encoding. Conceptually * finds the sub string (offset) to trim from the left side of the * first string all characters found in the second string. * * Results: * The number of bytes to be removed from the start of the string. * * Side effects: * None. * *---------------------------------------------------------------------- */ static inline size_t TrimLeft( const char *bytes, /* String to be trimmed... */ size_t numBytes, /* ...and its length in bytes */ const char *trim, /* String of trim characters... */ size_t numTrim) /* ...and its length in bytes */ { const char *p = bytes; Tcl_UniChar ch1 = 0, ch2 = 0; /* * Outer loop: iterate over string to be trimmed. */ do { size_t pInc = TclUtfToUniChar(p, &ch1); const char *q = trim; size_t bytesLeft = numTrim; /* * Inner loop: scan trim string for match to current character. */ do { size_t qInc = TclUtfToUniChar(q, &ch2); if (ch1 == ch2) { break; } q += qInc; bytesLeft -= qInc; } while (bytesLeft); if (bytesLeft == 0) { /* * No match; trim task done; *p is first non-trimmed char. */ break; } p += pInc; numBytes -= pInc; } while (numBytes > 0); return p - bytes; } size_t TclTrimLeft( const char *bytes, /* String to be trimmed... */ size_t numBytes, /* ...and its length in bytes */ const char *trim, /* String of trim characters... */ size_t numTrim) /* ...and its length in bytes */ { size_t res; Tcl_DString bytesBuf, trimBuf; /* Empty strings -> nothing to do */ if ((numBytes == 0) || (numTrim == 0)) { return 0; } Tcl_DStringInit(&bytesBuf); Tcl_DStringInit(&trimBuf); bytes = UtfWellFormedEnd(&bytesBuf, bytes, numBytes); trim = UtfWellFormedEnd(&trimBuf, trim, numTrim); res = TrimLeft(bytes, numBytes, trim, numTrim); if (res > numBytes) { res = numBytes; } Tcl_DStringFree(&bytesBuf); Tcl_DStringFree(&trimBuf); return res; } /* *---------------------------------------------------------------------- * * TclTrim -- * Finds the sub string (offset) to trim from both sides of the * first string all characters found in the second string. * * Results: * The number of bytes to be removed from the start of the string * * Side effects: * None. * *---------------------------------------------------------------------- */ size_t TclTrim( const char *bytes, /* String to be trimmed... */ size_t numBytes, /* ...and its length in bytes */ const char *trim, /* String of trim characters... */ size_t numTrim, /* ...and its length in bytes */ size_t *trimRight) /* Offset from the end of the string. */ { size_t trimLeft; Tcl_DString bytesBuf, trimBuf; *trimRight = 0; /* Empty strings -> nothing to do */ if ((numBytes == 0) || (numTrim == 0)) { return 0; } Tcl_DStringInit(&bytesBuf); Tcl_DStringInit(&trimBuf); bytes = UtfWellFormedEnd(&bytesBuf, bytes, numBytes); trim = UtfWellFormedEnd(&trimBuf, trim, numTrim); trimLeft = TrimLeft(bytes, numBytes, trim, numTrim); if (trimLeft > numBytes) { trimLeft = numBytes; } numBytes -= trimLeft; /* have to trim yet (first char was already verified within TrimLeft) */ if (numBytes > 1) { bytes += trimLeft; *trimRight = TrimRight(bytes, numBytes, trim, numTrim); if (*trimRight > numBytes) { *trimRight = numBytes; } } Tcl_DStringFree(&bytesBuf); Tcl_DStringFree(&trimBuf); return trimLeft; } /* *---------------------------------------------------------------------- * * Tcl_Concat -- * * Concatenate a set of strings into a single large string. * * Results: * The return value is dynamically-allocated string containing a * concatenation of all the strings in argv, with spaces between the * original argv elements. * * Side effects: * Memory is allocated for the result; the caller is responsible for * freeing the memory. * *---------------------------------------------------------------------- */ /* The whitespace characters trimmed during [concat] operations */ #define CONCAT_WS_SIZE (sizeof(CONCAT_TRIM_SET "") - 1) char * Tcl_Concat( int argc, /* Number of strings to concatenate. */ const char *const *argv) /* Array of strings to concatenate. */ { int i; size_t needSpace = 0, bytesNeeded = 0; char *result, *p; /* * Dispose of the empty result corner case first to simplify later code. */ if (argc == 0) { result = (char *) Tcl_Alloc(1); result[0] = '\0'; return result; } /* * First allocate the result buffer at the size required. */ for (i = 0; i < argc; i++) { bytesNeeded += strlen(argv[i]); } /* * All element bytes + (argc - 1) spaces + 1 terminating NULL. */ result = Tcl_Alloc(bytesNeeded + argc); for (p = result, i = 0; i < argc; i++) { size_t triml, trimr, elemLength; const char *element; element = argv[i]; elemLength = strlen(argv[i]); /* Trim away the leading/trailing whitespace. */ triml = TclTrim(element, elemLength, CONCAT_TRIM_SET, CONCAT_WS_SIZE, &trimr); element += triml; elemLength -= triml + trimr; /* Do not permit trimming to expose a final backslash character. */ elemLength += trimr && (element[elemLength - 1] == '\\'); /* * If we're left with empty element after trimming, do nothing. */ if (elemLength == 0) { continue; } /* * Append to the result with space if needed. */ if (needSpace) { *p++ = ' '; } memcpy(p, element, elemLength); p += elemLength; needSpace = 1; } *p = '\0'; return result; } /* *---------------------------------------------------------------------- * * Tcl_ConcatObj -- * * Concatenate the strings from a set of objects into a single string * object with spaces between the original strings. * * Results: * The return value is a new string object containing a concatenation of * the strings in objv. Its ref count is zero. * * Side effects: * A new object is created. * *---------------------------------------------------------------------- */ Tcl_Obj * Tcl_ConcatObj( int objc, /* Number of objects to concatenate. */ Tcl_Obj *const objv[]) /* Array of objects to concatenate. */ { int i, needSpace = 0; size_t bytesNeeded = 0, elemLength; const char *element; Tcl_Obj *objPtr, *resPtr; /* * Check first to see if all the items are of list type or empty. If so, * we will concat them together as lists, and return a list object. This * is only valid when the lists are in canonical form. */ for (i = 0; i < objc; i++) { size_t length; objPtr = objv[i]; if (TclListObjIsCanonical(objPtr)) { continue; } (void)TclGetStringFromObj(objPtr, &length); if (length > 0) { break; } } if (i == objc) { resPtr = NULL; for (i = 0; i < objc; i++) { objPtr = objv[i]; if (!TclListObjIsCanonical(objPtr)) { continue; } if (resPtr) { if (TCL_OK != Tcl_ListObjAppendList(NULL, resPtr, objPtr)) { /* Abandon ship! */ Tcl_DecrRefCount(resPtr); goto slow; } } else { resPtr = TclListObjCopy(NULL, objPtr); } } if (!resPtr) { resPtr = Tcl_NewObj(); } return resPtr; } slow: /* * Something cannot be determined to be safe, so build the concatenation * the slow way, using the string representations. * * First try to pre-allocate the size required. */ for (i = 0; i < objc; i++) { element = TclGetStringFromObj(objv[i], &elemLength); bytesNeeded += elemLength; } /* * Does not matter if this fails, will simply try later to build up the * string with each Append reallocating as needed with the usual string * append algorithm. When that fails it will report the error. */ TclNewObj(resPtr); (void) Tcl_AttemptSetObjLength(resPtr, bytesNeeded + objc - 1); Tcl_SetObjLength(resPtr, 0); for (i = 0; i < objc; i++) { size_t triml, trimr; element = TclGetStringFromObj(objv[i], &elemLength); /* Trim away the leading/trailing whitespace. */ triml = TclTrim(element, elemLength, CONCAT_TRIM_SET, CONCAT_WS_SIZE, &trimr); element += triml; elemLength -= triml + trimr; /* Do not permit trimming to expose a final backslash character. */ elemLength += trimr && (element[elemLength - 1] == '\\'); /* * If we're left with empty element after trimming, do nothing. */ if (elemLength == 0) { continue; } /* * Append to the result with space if needed. */ if (needSpace) { Tcl_AppendToObj(resPtr, " ", 1); } Tcl_AppendToObj(resPtr, element, elemLength); needSpace = 1; } return resPtr; } /* *---------------------------------------------------------------------- * * Tcl_StringCaseMatch -- * * See if a particular string matches a particular pattern. Allows case * insensitivity. * * Results: * The return value is 1 if string matches pattern, and 0 otherwise. The * matching operation permits the following special characters in the * pattern: *?\[] (see the manual entry for details on what these mean). * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_StringCaseMatch( const char *str, /* String. */ const char *pattern, /* Pattern, which may contain special * characters. */ int nocase) /* 0 for case sensitive, 1 for insensitive */ { int p, charLen; const char *pstart = pattern; Tcl_UniChar ch1 = 0, ch2 = 0; while (1) { p = *pattern; /* * See if we're at the end of both the pattern and the string. If so, * we succeeded. If we're at the end of the pattern but not at the end * of the string, we failed. */ if (p == '\0') { return (*str == '\0'); } if ((*str == '\0') && (p != '*')) { return 0; } /* * Check for a "*" as the next pattern character. It matches any * substring. We handle this by calling ourselves recursively for each * postfix of string, until either we match or we reach the end of the * string. */ if (p == '*') { /* * Skip all successive *'s in the pattern */ while (*(++pattern) == '*') {} p = *pattern; if (p == '\0') { return 1; } /* * This is a special case optimization for single-byte utf. */ if (UCHAR(*pattern) < 0x80) { ch2 = (Tcl_UniChar) (nocase ? tolower(UCHAR(*pattern)) : UCHAR(*pattern)); } else { Tcl_UtfToUniChar(pattern, &ch2); if (nocase) { ch2 = Tcl_UniCharToLower(ch2); } } while (1) { /* * Optimization for matching - cruise through the string * quickly if the next char in the pattern isn't a special * character */ if ((p != '[') && (p != '?') && (p != '\\')) { if (nocase) { while (*str) { charLen = TclUtfToUniChar(str, &ch1); if (ch2==ch1 || ch2==Tcl_UniCharToLower(ch1)) { break; } str += charLen; } } else { /* * There's no point in trying to make this code * shorter, as the number of bytes you want to compare * each time is non-constant. */ while (*str) { charLen = TclUtfToUniChar(str, &ch1); if (ch2 == ch1) { break; } str += charLen; } } } if (Tcl_StringCaseMatch(str, pattern, nocase)) { return 1; } if (*str == '\0') { return 0; } str += TclUtfToUniChar(str, &ch1); } } /* * Check for a "?" as the next pattern character. It matches any * single character. */ if (p == '?') { pattern++; str += TclUtfToUniChar(str, &ch1); continue; } /* * Check for a "[" as the next pattern character. It is followed by a * list of characters that are acceptable, or by a range (two * characters separated by "-"). */ if (p == '[') { Tcl_UniChar startChar = 0, endChar = 0; pattern++; if (UCHAR(*str) < 0x80) { ch1 = (Tcl_UniChar) (nocase ? tolower(UCHAR(*str)) : UCHAR(*str)); str++; } else { str += Tcl_UtfToUniChar(str, &ch1); if (nocase) { ch1 = Tcl_UniCharToLower(ch1); } } while (1) { if ((*pattern == ']') || (*pattern == '\0')) { return 0; } if (UCHAR(*pattern) < 0x80) { startChar = (Tcl_UniChar) (nocase ? tolower(UCHAR(*pattern)) : UCHAR(*pattern)); pattern++; } else { pattern += Tcl_UtfToUniChar(pattern, &startChar); if (nocase) { startChar = Tcl_UniCharToLower(startChar); } } if (*pattern == '-') { pattern++; if (*pattern == '\0') { return 0; } if (UCHAR(*pattern) < 0x80) { endChar = (Tcl_UniChar) (nocase ? tolower(UCHAR(*pattern)) : UCHAR(*pattern)); pattern++; } else { pattern += Tcl_UtfToUniChar(pattern, &endChar); if (nocase) { endChar = Tcl_UniCharToLower(endChar); } } if (((startChar <= ch1) && (ch1 <= endChar)) || ((endChar <= ch1) && (ch1 <= startChar))) { /* * Matches ranges of form [a-z] or [z-a]. */ break; } } else if (startChar == ch1) { break; } } while (*pattern != ']') { if (*pattern == '\0') { pattern = Tcl_UtfPrev(pattern, pstart); break; } pattern++; } pattern++; continue; } /* * If the next pattern character is '\', just strip off the '\' so we * do exact matching on the character that follows. */ if (p == '\\') { pattern++; if (*pattern == '\0') { return 0; } } /* * There's no special character. Just make sure that the next bytes of * each string match. */ str += TclUtfToUniChar(str, &ch1); pattern += TclUtfToUniChar(pattern, &ch2); if (nocase) { if (Tcl_UniCharToLower(ch1) != Tcl_UniCharToLower(ch2)) { return 0; } } else if (ch1 != ch2) { return 0; } } } /* *---------------------------------------------------------------------- * * TclByteArrayMatch -- * * See if a particular string matches a particular pattern. Does not * allow for case insensitivity. * Parallels tclUtf.c:TclUniCharMatch, adjusted for char* and sans nocase. * * Results: * The return value is 1 if string matches pattern, and 0 otherwise. The * matching operation permits the following special characters in the * pattern: *?\[] (see the manual entry for details on what these mean). * * Side effects: * None. * *---------------------------------------------------------------------- */ int TclByteArrayMatch( const unsigned char *string,/* String. */ size_t strLen, /* Length of String */ const unsigned char *pattern, /* Pattern, which may contain special * characters. */ size_t ptnLen, /* Length of Pattern */ int flags) { const unsigned char *stringEnd, *patternEnd; unsigned char p; stringEnd = string + strLen; patternEnd = pattern + ptnLen; while (1) { /* * See if we're at the end of both the pattern and the string. If so, * we succeeded. If we're at the end of the pattern but not at the end * of the string, we failed. */ if (pattern == patternEnd) { return (string == stringEnd); } p = *pattern; if ((string == stringEnd) && (p != '*')) { return 0; } /* * Check for a "*" as the next pattern character. It matches any * substring. We handle this by skipping all the characters up to the * next matching one in the pattern, and then calling ourselves * recursively for each postfix of string, until either we match or we * reach the end of the string. */ if (p == '*') { /* * Skip all successive *'s in the pattern. */ while ((++pattern < patternEnd) && (*pattern == '*')) { /* empty body */ } if (pattern == patternEnd) { return 1; } p = *pattern; while (1) { /* * Optimization for matching - cruise through the string * quickly if the next char in the pattern isn't a special * character. */ if ((p != '[') && (p != '?') && (p != '\\')) { while ((string < stringEnd) && (p != *string)) { string++; } } if (TclByteArrayMatch(string, stringEnd - string, pattern, patternEnd - pattern, 0)) { return 1; } if (string == stringEnd) { return 0; } string++; } } /* * Check for a "?" as the next pattern character. It matches any * single character. */ if (p == '?') { pattern++; string++; continue; } /* * Check for a "[" as the next pattern character. It is followed by a * list of characters that are acceptable, or by a range (two * characters separated by "-"). */ if (p == '[') { unsigned char ch1, startChar, endChar; pattern++; ch1 = *string; string++; while (1) { if ((*pattern == ']') || (pattern == patternEnd)) { return 0; } startChar = *pattern; pattern++; if (*pattern == '-') { pattern++; if (pattern == patternEnd) { return 0; } endChar = *pattern; pattern++; if (((startChar <= ch1) && (ch1 <= endChar)) || ((endChar <= ch1) && (ch1 <= startChar))) { /* * Matches ranges of form [a-z] or [z-a]. */ break; } } else if (startChar == ch1) { break; } } while (*pattern != ']') { if (pattern == patternEnd) { pattern--; break; } pattern++; } pattern++; continue; } /* * If the next pattern character is '\', just strip off the '\' so we * do exact matching on the character that follows. */ if (p == '\\') { if (++pattern == patternEnd) { return 0; } } /* * There's no special character. Just make sure that the next bytes of * each string match. */ if (*string != *pattern) { return 0; } string++; pattern++; } } /* *---------------------------------------------------------------------- * * TclStringMatchObj -- * * See if a particular string matches a particular pattern. Allows case * insensitivity. This is the generic multi-type handler for the various * matching algorithms. * * Results: * The return value is 1 if string matches pattern, and 0 otherwise. The * matching operation permits the following special characters in the * pattern: *?\[] (see the manual entry for details on what these mean). * * Side effects: * None. * *---------------------------------------------------------------------- */ int TclStringMatchObj( Tcl_Obj *strObj, /* string object. */ Tcl_Obj *ptnObj, /* pattern object. */ int flags) /* Only TCL_MATCH_NOCASE should be passed, or * 0. */ { int match; size_t length = 0, plen = 0; /* * Promote based on the type of incoming object. * XXX: Currently doesn't take advantage of exact-ness that * XXX: TclReToGlob tells us about trivial = nocase ? 0 : TclMatchIsTrivial(TclGetString(ptnObj)); */ if (TclHasIntRep(strObj, &tclStringType) || (strObj->typePtr == NULL)) { Tcl_UniChar *udata, *uptn; udata = TclGetUnicodeFromObj(strObj, &length); uptn = TclGetUnicodeFromObj(ptnObj, &plen); match = TclUniCharMatch(udata, length, uptn, plen, flags); } else if (TclIsPureByteArray(strObj) && TclIsPureByteArray(ptnObj) && !flags) { unsigned char *data, *ptn; data = TclGetByteArrayFromObj(strObj, &length); ptn = TclGetByteArrayFromObj(ptnObj, &plen); match = TclByteArrayMatch(data, length, ptn, plen, 0); } else { match = Tcl_StringCaseMatch(TclGetString(strObj), TclGetString(ptnObj), flags); } return match; } /* *---------------------------------------------------------------------- * * Tcl_DStringInit -- * * Initializes a dynamic string, discarding any previous contents of the * string (Tcl_DStringFree should have been called already if the dynamic * string was previously in use). * * Results: * None. * * Side effects: * The dynamic string is initialized to be empty. * *---------------------------------------------------------------------- */ void Tcl_DStringInit( Tcl_DString *dsPtr) /* Pointer to structure for dynamic string. */ { dsPtr->string = dsPtr->staticSpace; dsPtr->length = 0; dsPtr->spaceAvl = TCL_DSTRING_STATIC_SIZE; dsPtr->staticSpace[0] = '\0'; } /* *---------------------------------------------------------------------- * * Tcl_DStringAppend -- * * Append more bytes to the current value of a dynamic string. * * Results: * The return value is a pointer to the dynamic string's new value. * * Side effects: * Length bytes from "bytes" (or all of "bytes" if length is less than * zero) are added to the current value of the string. Memory gets * reallocated if needed to accomodate the string's new size. * *---------------------------------------------------------------------- */ char * Tcl_DStringAppend( Tcl_DString *dsPtr, /* Structure describing dynamic string. */ const char *bytes, /* String to append. If length is * TCL_AUTO_LENGTH then this must be null-terminated. */ size_t length) /* Number of bytes from "bytes" to append. If * TCL_AUTO_LENGTH, then append all of bytes, up to null * at end. */ { size_t newSize; if (length == TCL_AUTO_LENGTH) { length = strlen(bytes); } newSize = length + dsPtr->length; /* * Allocate a larger buffer for the string if the current one isn't large * enough. Allocate extra space in the new buffer so that there will be * room to grow before we have to allocate again. */ if (newSize >= dsPtr->spaceAvl) { dsPtr->spaceAvl = newSize * 2; if (dsPtr->string == dsPtr->staticSpace) { char *newString = Tcl_Alloc(dsPtr->spaceAvl); memcpy(newString, dsPtr->string, dsPtr->length); dsPtr->string = newString; } else { size_t index = TCL_INDEX_NONE; /* See [16896d49fd] */ if (bytes >= dsPtr->string && bytes <= dsPtr->string + dsPtr->length) { index = bytes - dsPtr->string; } dsPtr->string = Tcl_Realloc(dsPtr->string, dsPtr->spaceAvl); if (index != TCL_INDEX_NONE) { bytes = dsPtr->string + index; } } } /* * Copy the new string into the buffer at the end of the old one. */ memcpy(dsPtr->string + dsPtr->length, bytes, length); dsPtr->length += length; dsPtr->string[dsPtr->length] = '\0'; return dsPtr->string; } /* *---------------------------------------------------------------------- * * TclDStringAppendObj, TclDStringAppendDString -- * * Simple wrappers round Tcl_DStringAppend that make it easier to append * from particular sources of strings. * *---------------------------------------------------------------------- */ char * TclDStringAppendObj( Tcl_DString *dsPtr, Tcl_Obj *objPtr) { size_t length; const char *bytes = TclGetStringFromObj(objPtr, &length); return Tcl_DStringAppend(dsPtr, bytes, length); } char * TclDStringAppendDString( Tcl_DString *dsPtr, Tcl_DString *toAppendPtr) { return Tcl_DStringAppend(dsPtr, Tcl_DStringValue(toAppendPtr), Tcl_DStringLength(toAppendPtr)); } /* *---------------------------------------------------------------------- * * Tcl_DStringAppendElement -- * * Append a list element to the current value of a dynamic string. * * Results: * The return value is a pointer to the dynamic string's new value. * * Side effects: * String is reformatted as a list element and added to the current value * of the string. Memory gets reallocated if needed to accomodate the * string's new size. * *---------------------------------------------------------------------- */ char * Tcl_DStringAppendElement( Tcl_DString *dsPtr, /* Structure describing dynamic string. */ const char *element) /* String to append. Must be * null-terminated. */ { char *dst = dsPtr->string + dsPtr->length; int needSpace = TclNeedSpace(dsPtr->string, dst); char flags = needSpace ? TCL_DONT_QUOTE_HASH : 0; size_t newSize = dsPtr->length + needSpace + TclScanElement(element, -1, &flags); /* * Allocate a larger buffer for the string if the current one isn't large * enough. Allocate extra space in the new buffer so that there will be * room to grow before we have to allocate again. SPECIAL NOTE: must use * memcpy, not strcpy, to copy the string to a larger buffer, since there * may be embedded NULLs in the string in some cases. */ if (newSize >= dsPtr->spaceAvl) { dsPtr->spaceAvl = newSize * 2; if (dsPtr->string == dsPtr->staticSpace) { char *newString = Tcl_Alloc(dsPtr->spaceAvl); memcpy(newString, dsPtr->string, dsPtr->length); dsPtr->string = newString; } else { int offset = -1; /* See [16896d49fd] */ if (element >= dsPtr->string && element <= dsPtr->string + dsPtr->length) { offset = element - dsPtr->string; } dsPtr->string = Tcl_Realloc(dsPtr->string, dsPtr->spaceAvl); if (offset >= 0) { element = dsPtr->string + offset; } } dst = dsPtr->string + dsPtr->length; } /* * Convert the new string to a list element and copy it into the buffer at * the end, with a space, if needed. */ if (needSpace) { *dst = ' '; dst++; dsPtr->length++; /* * If we need a space to separate this element from preceding stuff, * then this element will not lead a list, and need not have it's * leading '#' quoted. */ flags |= TCL_DONT_QUOTE_HASH; } dsPtr->length += TclConvertElement(element, -1, dst, flags); dsPtr->string[dsPtr->length] = '\0'; return dsPtr->string; } /* *---------------------------------------------------------------------- * * Tcl_DStringSetLength -- * * Change the length of a dynamic string. This can cause the string to * either grow or shrink, depending on the value of length. * * Results: * None. * * Side effects: * The length of dsPtr is changed to length and a null byte is stored at * that position in the string. * *---------------------------------------------------------------------- */ void Tcl_DStringSetLength( Tcl_DString *dsPtr, /* Structure describing dynamic string. */ size_t length) /* New length for dynamic string. */ { size_t newsize; if (length >= dsPtr->spaceAvl) { /* * There are two interesting cases here. In the first case, the user * may be trying to allocate a large buffer of a specific size. It * would be wasteful to overallocate that buffer, so we just allocate * enough for the requested size plus the trailing null byte. In the * second case, we are growing the buffer incrementally, so we need * behavior similar to Tcl_DStringAppend. The requested length will * usually be a small delta above the current spaceAvl, so we'll end * up doubling the old size. This won't grow the buffer quite as * quickly, but it should be close enough. */ newsize = dsPtr->spaceAvl * 2; if (length < newsize) { dsPtr->spaceAvl = newsize; } else { dsPtr->spaceAvl = length + 1; } if (dsPtr->string == dsPtr->staticSpace) { char *newString = Tcl_Alloc(dsPtr->spaceAvl); memcpy(newString, dsPtr->string, dsPtr->length); dsPtr->string = newString; } else { dsPtr->string = Tcl_Realloc(dsPtr->string, dsPtr->spaceAvl); } } dsPtr->length = length; dsPtr->string[length] = 0; } /* *---------------------------------------------------------------------- * * Tcl_DStringFree -- * * Frees up any memory allocated for the dynamic string and reinitializes * the string to an empty state. * * Results: * None. * * Side effects: * The previous contents of the dynamic string are lost, and the new * value is an empty string. * *---------------------------------------------------------------------- */ void Tcl_DStringFree( Tcl_DString *dsPtr) /* Structure describing dynamic string. */ { if (dsPtr->string != dsPtr->staticSpace) { Tcl_Free(dsPtr->string); } dsPtr->string = dsPtr->staticSpace; dsPtr->length = 0; dsPtr->spaceAvl = TCL_DSTRING_STATIC_SIZE; dsPtr->staticSpace[0] = '\0'; } /* *---------------------------------------------------------------------- * * Tcl_DStringResult -- * * This function moves the value of a dynamic string into an interpreter * as its string result. Afterwards, the dynamic string is reset to an * empty string. * * Results: * None. * * Side effects: * The string is "moved" to interp's result, and any existing string * result for interp is freed. dsPtr is reinitialized to an empty string. * *---------------------------------------------------------------------- */ void Tcl_DStringResult( Tcl_Interp *interp, /* Interpreter whose result is to be reset. */ Tcl_DString *dsPtr) /* Dynamic string that is to become the * result of interp. */ { Tcl_SetObjResult(interp, TclDStringToObj(dsPtr)); } /* *---------------------------------------------------------------------- * * Tcl_DStringGetResult -- * * This function moves an interpreter's result into a dynamic string. * * Results: * None. * * Side effects: * The interpreter's string result is cleared, and the previous contents * of dsPtr are freed. * * If the string result is empty, the object result is moved to the * string result, then the object result is reset. * *---------------------------------------------------------------------- */ void Tcl_DStringGetResult( Tcl_Interp *interp, /* Interpreter whose result is to be reset. */ Tcl_DString *dsPtr) /* Dynamic string that is to become the result * of interp. */ { Tcl_Obj *obj = Tcl_GetObjResult(interp); char *bytes = TclGetString(obj); Tcl_DStringFree(dsPtr); Tcl_DStringAppend(dsPtr, bytes, obj->length); Tcl_ResetResult(interp); } /* *---------------------------------------------------------------------- * * TclDStringToObj -- * * This function moves a dynamic string's contents to a new Tcl_Obj. Be * aware that this function does *not* check that the encoding of the * contents of the dynamic string is correct; this is the caller's * responsibility to enforce. * * Results: * The newly-allocated untyped (i.e., typePtr==NULL) Tcl_Obj with a * reference count of zero. * * Side effects: * The string is "moved" to the object. dsPtr is reinitialized to an * empty string; it does not need to be Tcl_DStringFree'd after this if * not used further. * *---------------------------------------------------------------------- */ Tcl_Obj * TclDStringToObj( Tcl_DString *dsPtr) { Tcl_Obj *result; if (dsPtr->string == dsPtr->staticSpace) { if (dsPtr->length == 0) { TclNewObj(result); } else { /* * Static buffer, so must copy. */ TclNewStringObj(result, dsPtr->string, dsPtr->length); } } else { /* * Dynamic buffer, so transfer ownership and reset. */ TclNewObj(result); result->bytes = dsPtr->string; result->length = dsPtr->length; } /* * Re-establish the DString as empty with no buffer allocated. */ dsPtr->string = dsPtr->staticSpace; dsPtr->spaceAvl = TCL_DSTRING_STATIC_SIZE; dsPtr->length = 0; dsPtr->staticSpace[0] = '\0'; return result; } /* *---------------------------------------------------------------------- * * Tcl_DStringStartSublist -- * * This function adds the necessary information to a dynamic string * (e.g. " {") to start a sublist. Future element appends will be in the * sublist rather than the main list. * * Results: * None. * * Side effects: * Characters get added to the dynamic string. * *---------------------------------------------------------------------- */ void Tcl_DStringStartSublist( Tcl_DString *dsPtr) /* Dynamic string. */ { if (TclNeedSpace(dsPtr->string, dsPtr->string + dsPtr->length)) { TclDStringAppendLiteral(dsPtr, " {"); } else { TclDStringAppendLiteral(dsPtr, "{"); } } /* *---------------------------------------------------------------------- * * Tcl_DStringEndSublist -- * * This function adds the necessary characters to a dynamic string to end * a sublist (e.g. "}"). Future element appends will be in the enclosing * (sub)list rather than the current sublist. * * Results: * None. * * Side effects: * None. * *---------------------------------------------------------------------- */ void Tcl_DStringEndSublist( Tcl_DString *dsPtr) /* Dynamic string. */ { TclDStringAppendLiteral(dsPtr, "}"); } /* *---------------------------------------------------------------------- * * Tcl_PrintDouble -- * * Given a floating-point value, this function converts it to an ASCII * string using. * * Results: * The ASCII equivalent of "value" is written at "dst". It is guaranteed * to contain a decimal point or exponent, so that it looks like a * floating-point value and not an integer. * * Side effects: * None. * *---------------------------------------------------------------------- */ void Tcl_PrintDouble( Tcl_Interp *interp, /* Not used */ double value, /* Value to print as string. */ char *dst) /* Where to store converted value; must have * at least TCL_DOUBLE_SPACE characters. */ { char *p, c; int exponent; int signum; char *digits; char *end; /* * Handle NaN. */ if (TclIsNaN(value)) { TclFormatNaN(value, dst); return; } /* * Handle infinities. */ if (TclIsInfinite(value)) { /* * Remember to copy the terminating NUL too. */ if (value < 0) { memcpy(dst, "-Inf", 5); } else { memcpy(dst, "Inf", 4); } return; } /* * Ordinary (normal and denormal) values. */ digits = TclDoubleDigits(value, -1, TCL_DD_SHORTEST, &exponent, &signum, &end); if (signum) { *dst++ = '-'; } p = digits; if (exponent < -4 || exponent > 16) { /* * E format for numbers < 1e-3 or >= 1e17. */ *dst++ = *p++; c = *p; if (c != '\0') { *dst++ = '.'; while (c != '\0') { *dst++ = c; c = *++p; } } sprintf(dst, "e%+d", exponent); } else { /* * F format for others. */ if (exponent < 0) { *dst++ = '0'; } c = *p; while (exponent-- >= 0) { if (c != '\0') { *dst++ = c; c = *++p; } else { *dst++ = '0'; } } *dst++ = '.'; if (c == '\0') { *dst++ = '0'; } else { while (++exponent < -1) { *dst++ = '0'; } while (c != '\0') { *dst++ = c; c = *++p; } } *dst++ = '\0'; } Tcl_Free(digits); } /* *---------------------------------------------------------------------- * * TclNeedSpace -- * * This function checks to see whether it is appropriate to add a space * before appending a new list element to an existing string. * * Results: * The return value is 1 if a space is appropriate, 0 otherwise. * * Side effects: * None. * *---------------------------------------------------------------------- */ int TclNeedSpace( const char *start, /* First character in string. */ const char *end) /* End of string (place where space will be * added, if appropriate). */ { /* * A space is needed unless either: * (a) we're at the start of the string, or */ if (end == start) { return 0; } /* * (b) we're at the start of a nested list-element, quoted with an open * curly brace; we can be nested arbitrarily deep, so long as the * first curly brace starts an element, so backtrack over open curly * braces that are trailing characters of the string; and */ end = Tcl_UtfPrev(end, start); while (*end == '{') { if (end == start) { return 0; } end = Tcl_UtfPrev(end, start); } /* * (c) the trailing character of the string is already a list-element * separator (according to TclFindElement); that is, one of these * characters: * \u0009 \t TAB * \u000A \n NEWLINE * \u000B \v VERTICAL TAB * \u000C \f FORM FEED * \u000D \r CARRIAGE RETURN * \u0020 SPACE * with the condition that the penultimate character is not a * backslash. */ if (*end > 0x20) { /* * Performance tweak. All ASCII spaces are <= 0x20. So get a quick * answer for most characters before comparing against all spaces in * the switch below. * * NOTE: Remove this if other Unicode spaces ever get accepted as * list-element separators. */ return 1; } switch (*end) { case ' ': case '\t': case '\n': case '\r': case '\v': case '\f': if ((end == start) || (end[-1] != '\\')) { return 0; } } return 1; } /* *---------------------------------------------------------------------- * * TclFormatInt -- * * This procedure formats an integer into a sequence of decimal digit * characters in a buffer. If the integer is negative, a minus sign is * inserted at the start of the buffer. A null character is inserted at * the end of the formatted characters. It is the caller's responsibility * to ensure that enough storage is available. This procedure has the * effect of sprintf(buffer, "%ld", n) but is faster as proven in * benchmarks. This is key to UpdateStringOfInt, which is a common path * for a lot of code (e.g. int-indexed arrays). * * Results: * An integer representing the number of characters formatted, not * including the terminating \0. * * Side effects: * The formatted characters are written into the storage pointer to by * the "buffer" argument. * *---------------------------------------------------------------------- */ size_t TclFormatInt( char *buffer, /* Points to the storage into which the * formatted characters are written. */ Tcl_WideInt n) /* The integer to format. */ { Tcl_WideUInt intVal; size_t i = 0, numFormatted, j; static const char digits[] = "0123456789"; /* * Generate the characters of the result backwards in the buffer. */ intVal = (n < 0 ? -(Tcl_WideUInt)n : (Tcl_WideUInt)n); do { buffer[i++] = digits[intVal % 10]; intVal = intVal / 10; } while (intVal > 0); if (n < 0) { buffer[i++] = '-'; } buffer[i] = '\0'; numFormatted = i--; /* * Now reverse the characters. */ for (j = 0; j < i; j++, i--) { char tmp = buffer[i]; buffer[i] = buffer[j]; buffer[j] = tmp; } return numFormatted; } /* *---------------------------------------------------------------------- * * GetWideForIndex -- * * This function produces a wide integer value corresponding to the * index value held in *objPtr. The parsing supports all values * recognized as any size of integer, and the syntaxes end[-+]$integer * and $integer[-+]$integer. The argument endValue is used to give * the meaning of the literal index value "end". Index arithmetic * on arguments outside the wide integer range are only accepted * when interp is a working interpreter, not NULL. * * Results: * When parsing of *objPtr successfully recognizes an index value, * TCL_OK is returned, and the wide integer value corresponding to * the recognized index value is written to *widePtr. When parsing * fails, TCL_ERROR is returned and error information is written to * interp, if non-NULL. * * Side effects: * The type of *objPtr may change. * *---------------------------------------------------------------------- */ static int GetWideForIndex( Tcl_Interp *interp, /* Interpreter to use for error reporting. If * NULL, then no error message is left after * errors. */ Tcl_Obj *objPtr, /* Points to the value to be parsed */ size_t endValue, /* The value to be stored at *widePtr if * objPtr holds "end". * NOTE: this value may be TCL_INDEX_NONE. */ Tcl_WideInt *widePtr) /* Location filled in with a wide integer * representing an index. */ { ClientData cd; const char *opPtr; int numType, length, t1 = 0, t2 = 0; int code = TclGetNumberFromObj(NULL, objPtr, &cd, &numType); if (code == TCL_OK) { if (numType == TCL_NUMBER_INT) { /* objPtr holds an integer in the signed wide range */ *widePtr = *(Tcl_WideInt *)cd; return TCL_OK; } if (numType != TCL_NUMBER_BIG) { /* Must be a double -> not a valid index */ goto parseError; } /* objPtr holds an integer outside the signed wide range */ /* Truncate to the signed wide range. */ *widePtr = ((mp_isneg((mp_int *)cd)) ? WIDE_MIN : WIDE_MAX); return TCL_OK; } /* objPtr does not hold a number, check the end+/- format... */ if (GetEndOffsetFromObj(objPtr, endValue, widePtr) == TCL_OK) { return TCL_OK; } /* If we reach here, the string rep of objPtr exists. */ /* * The valid index syntax does not include any value that is * a list of more than one element. This is necessary so that * lists of index values can be reliably distinguished from any * single index value. */ /* * Quick scan to see if multi-value list is even possible. * This relies on TclGetString() returning a NUL-terminated string. */ if ((TclMaxListLength(TclGetString(objPtr), -1, NULL) > 1) /* If it's possible, do the full list parse. */ && (TCL_OK == Tcl_ListObjLength(NULL, objPtr, &length)) && (length > 1)) { goto parseError; } /* Passed the list screen, so parse for index arithmetic expression */ if (TCL_OK == TclParseNumber(NULL, objPtr, NULL, NULL, -1, &opPtr, TCL_PARSE_INTEGER_ONLY)) { Tcl_WideInt w1=0, w2=0; /* value starts with valid integer... */ if ((*opPtr == '-') || (*opPtr == '+')) { /* ... value continues with [-+] ... */ /* Save first integer as wide if possible */ TclGetNumberFromObj(NULL, objPtr, &cd, &t1); if (t1 == TCL_NUMBER_INT) { w1 = (*(Tcl_WideInt *)cd); } if (TCL_OK == TclParseNumber(NULL, objPtr, NULL, opPtr + 1, -1, NULL, TCL_PARSE_INTEGER_ONLY)) { /* ... value concludes with second valid integer */ /* Save second integer as wide if possible */ TclGetNumberFromObj(NULL, objPtr, &cd, &t2); if (t2 == TCL_NUMBER_INT) { w2 = (*(Tcl_WideInt *)cd); } } } /* Clear invalid intreps left by TclParseNumber */ TclFreeIntRep(objPtr); if (t1 && t2) { /* We have both integer values */ if ((t1 == TCL_NUMBER_INT) && (t2 == TCL_NUMBER_INT)) { /* Both are wide, do wide-integer math */ if (*opPtr == '-') { if ((w2 == WIDE_MIN) && (interp != NULL)) { goto extreme; } w2 = -w2; } if ((w1 ^ w2) < 0) { /* Different signs, sum cannot overflow */ *widePtr = w1 + w2; } else if (w1 >= 0) { if (w1 < WIDE_MAX - w2) { *widePtr = w1 + w2; } else { *widePtr = WIDE_MAX; } } else { if (w1 > WIDE_MIN - w2) { *widePtr = w1 + w2; } else { *widePtr = WIDE_MIN; } } } else if (interp == NULL) { /* * We use an interp to do bignum index calculations. * If we don't get one, call all indices with bignums errors, * and rely on callers to handle it. */ return TCL_ERROR; } else { /* * At least one is big, do bignum math. Little reason to * value performance here. Re-use code. Parse has verified * objPtr is an expression. Compute it. */ Tcl_Obj *sum; extreme: Tcl_ExprObj(interp, objPtr, &sum); TclGetNumberFromObj(NULL, sum, &cd, &numType); if (numType == TCL_NUMBER_INT) { /* sum holds an integer in the signed wide range */ *widePtr = *(Tcl_WideInt *)cd; } else { /* sum holds an integer outside the signed wide range */ /* Truncate to the signed wide range. */ if (mp_isneg((mp_int *)cd)) { *widePtr = WIDE_MIN; } else { *widePtr = WIDE_MAX; } } Tcl_DecrRefCount(sum); } return TCL_OK; } } /* Report a parse error. */ parseError: if (interp != NULL) { char * bytes = TclGetString(objPtr); Tcl_SetObjResult(interp, Tcl_ObjPrintf( "bad index \"%s\": must be integer?[+-]integer? or" " end?[+-]integer?", bytes)); if (!strncmp(bytes, "end-", 4)) { bytes += 4; } Tcl_SetErrorCode(interp, "TCL", "VALUE", "INDEX", NULL); } return TCL_ERROR; } /* *---------------------------------------------------------------------- * * Tcl_GetIntForIndex -- * * Provides an integer corresponding to the list index held in a Tcl * object. The string value 'objPtr' is expected have the format * integer([+-]integer)? or end([+-]integer)?. * * Value * TCL_OK * * The index is stored at the address given by by 'indexPtr'. If * 'objPtr' has the value "end", the value stored is 'endValue'. * * TCL_ERROR * * The value of 'objPtr' does not have one of the expected formats. If * 'interp' is non-NULL, an error message is left in the interpreter's * result object. * * Effect * * The object referenced by 'objPtr' is converted, as needed, to an * integer, wide integer, or end-based-index object. * *---------------------------------------------------------------------- */ int Tcl_GetIntForIndex( Tcl_Interp *interp, /* Interpreter to use for error reporting. If * NULL, then no error message is left after * errors. */ Tcl_Obj *objPtr, /* Points to an object containing either "end" * or an integer. */ size_t endValue, /* The value to be stored at "indexPtr" if * "objPtr" holds "end". */ size_t *indexPtr) /* Location filled in with an integer * representing an index. */ { Tcl_WideInt wide; /* Use platform-related size_t to wide-int to consider negative value * TCL_INDEX_NONE if wide-int and size_t have different dimensions. */ if (GetWideForIndex(interp, objPtr, endValue, &wide) == TCL_ERROR) { return TCL_ERROR; } if (wide < 0) { *indexPtr = TCL_INDEX_NONE; } else if ((Tcl_WideUInt)wide > TCL_INDEX_END) { *indexPtr = TCL_INDEX_END; } else { *indexPtr = (size_t) wide; } return TCL_OK; } /* *---------------------------------------------------------------------- * * GetEndOffsetFromObj -- * * Look for a string of the form "end[+-]offset" and convert it to an * internal representation holding the offset. * * Results: * Tcl return code. * * Side effects: * May store a Tcl_ObjType. * *---------------------------------------------------------------------- */ static int GetEndOffsetFromObj( Tcl_Obj *objPtr, /* Pointer to the object to parse */ size_t endValue, /* The value to be stored at "indexPtr" if * "objPtr" holds "end". */ Tcl_WideInt *widePtr) /* Location filled in with an integer * representing an index. */ { Tcl_ObjIntRep *irPtr; Tcl_WideInt offset = 0; /* Offset in the "end-offset" expression */ while ((irPtr = TclFetchIntRep(objPtr, &endOffsetType)) == NULL) { Tcl_ObjIntRep ir; size_t length; const char *bytes = TclGetStringFromObj(objPtr, &length); if ((length < 3) || (length == 4)) { /* Too short to be "end" or to be "end-$integer" */ return TCL_ERROR; } if ((*bytes != 'e') || (strncmp(bytes, "end", 3) != 0)) { /* Value doesn't start with "end" */ return TCL_ERROR; } if (length > 4) { ClientData cd; int t; /* Parse for the "end-..." or "end+..." formats */ if ((bytes[3] != '-') && (bytes[3] != '+')) { /* No operator where we need one */ return TCL_ERROR; } if (TclIsSpaceProc(bytes[4])) { /* Space after + or - not permitted. */ return TCL_ERROR; } /* Parse the integer offset */ if (TCL_OK != TclParseNumber(NULL, objPtr, NULL, bytes+4, length-4, NULL, TCL_PARSE_INTEGER_ONLY)) { /* Not a recognized integer format */ return TCL_ERROR; } /* Got an integer offset; pull it from where parser left it. */ TclGetNumberFromObj(NULL, objPtr, &cd, &t); if (t == TCL_NUMBER_BIG) { /* Truncate to the signed wide range. */ if (mp_isneg((mp_int *)cd)) { offset = (bytes[3] == '-') ? WIDE_MAX : WIDE_MIN; } else { offset = (bytes[3] == '-') ? WIDE_MIN : WIDE_MAX; } } else { /* assert (t == TCL_NUMBER_INT); */ offset = (*(Tcl_WideInt *)cd); if (bytes[3] == '-') { offset = (offset == WIDE_MIN) ? WIDE_MAX : -offset; } } } /* Success. Store the new internal rep. */ ir.wideValue = offset; Tcl_StoreIntRep(objPtr, &endOffsetType, &ir); } offset = irPtr->wideValue; if (endValue == TCL_INDEX_NONE) { *widePtr = offset - 1; } else if (offset < 0) { /* Different signs, sum cannot overflow */ *widePtr = endValue + offset; } else if (endValue < (Tcl_WideUInt)WIDE_MAX - offset) { *widePtr = endValue + offset; } else { *widePtr = WIDE_MAX; } return TCL_OK; } /* *---------------------------------------------------------------------- * * TclIndexEncode -- * * Parse objPtr to determine if it is an index value. Two cases * are possible. The value objPtr might be parsed as an absolute * index value in the C signed int range. Note that this includes * index values that are integers as presented and it includes index * arithmetic expressions. The absolute index values that can be * directly meaningful as an index into either a list or a string are * those integer values >= TCL_INDEX_START (0) * and < INT_MAX. * The largest string supported in Tcl 8 has bytelength INT_MAX. * This means the largest supported character length is also INT_MAX, * and the index of the last character in a string of length INT_MAX * is INT_MAX-1. * * Any absolute index value parsed outside that range is encoded * using the before and after values passed in by the * caller as the encoding to use for indices that are either * less than or greater than the usable index range. TCL_INDEX_NONE * is available as a good choice for most callers to use for * after. Likewise, the value TCL_INDEX_NONE is good for * most callers to use for before. Other values are possible * when the caller knows it is helpful in producing its own behavior * for indices before and after the indexed item. * * A token can also be parsed as an end-relative index expression. * All end-relative expressions that indicate an index larger * than end (end+2, end--5) point beyond the end of the indexed * collection, and can be encoded as after. The end-relative * expressions that indicate an index less than or equal to end * are encoded relative to the value TCL_INDEX_END (-2). The * index "end" is encoded as -2, down to the index "end-0x7ffffffe" * which is encoded as INT_MIN. Since the largest index into a * string possible in Tcl 8 is 0x7ffffffe, the interpretation of * "end-0x7ffffffe" for that largest string would be 0. Thus, * if the tokens "end-0x7fffffff" or "end+-0x80000000" are parsed, * they can be encoded with the before value. * * These details will require re-examination whenever string and * list length limits are increased, but that will likely also * mean a revised routine capable of returning Tcl_WideInt values. * * Returns: * TCL_OK if parsing succeeded, and TCL_ERROR if it failed. * * Side effects: * When TCL_OK is returned, the encoded index value is written * to *indexPtr. * *---------------------------------------------------------------------- */ int TclIndexEncode( Tcl_Interp *interp, /* For error reporting, may be NULL */ Tcl_Obj *objPtr, /* Index value to parse */ size_t before, /* Value to return for index before beginning */ size_t after, /* Value to return for index after end */ int *indexPtr) /* Where to write the encoded answer, not NULL */ { ClientData cd; Tcl_WideInt wide; int idx, numType, code = TclGetNumberFromObj(NULL, objPtr, &cd, &numType); if ((code == TCL_OK) && (numType == TCL_NUMBER_INT)) { /* We parsed a value in the range WIDE_MIN...WIDE_MAX */ wide = (*(Tcl_WideInt *)cd); integerEncode: if (wide < 0) { /* All negative absolute indices are "before the beginning" */ idx = before; } else if (wide >= INT_MAX) { /* This index value is always "after the end" */ idx = after; } else { idx = (int) wide; } /* usual case, the absolute index value encodes itself */ } else if (TCL_OK == GetEndOffsetFromObj(objPtr, 0, &wide)) { /* * We parsed an end+offset index value. * wide holds the offset value in the range WIDE_MIN...WIDE_MAX. */ if (wide > 0) { /* * All end+positive or end-negative expressions * always indicate "after the end". */ idx = (int) after; } else if (wide < INT_MIN - (int) TCL_INDEX_END) { /* These indices always indicate "before the beginning */ idx = (int) before; } else { /* Encoded end-positive (or end+negative) are offset */ idx = (int) wide + (int) TCL_INDEX_END; } /* TODO: Consider flag to suppress repeated end-offset parse. */ } else if (TCL_OK == GetWideForIndex(interp, objPtr, 0, &wide)) { /* * Only reach this case when the index value is a * constant index arithmetic expression, and wide * holds the result. Treat it the same as if it were * parsed as an absolute integer value. */ goto integerEncode; } else { return TCL_ERROR; } *indexPtr = idx; return TCL_OK; } /* *---------------------------------------------------------------------- * * TclIndexDecode -- * * Decodes a value previously encoded by TclIndexEncode. The argument * endValue indicates what value of "end" should be used in the * decoding. * * Results: * The decoded index value. * *---------------------------------------------------------------------- */ size_t TclIndexDecode( int encoded, /* Value to decode */ size_t endValue) /* Meaning of "end" to use, > TCL_INDEX_END */ { if (encoded > (int)TCL_INDEX_END) { return encoded; } if (endValue >= TCL_INDEX_END - encoded) { return endValue + encoded - TCL_INDEX_END; } return TCL_INDEX_NONE; } /* *---------------------------------------------------------------------- * * ClearHash -- * * Remove all the entries in the hash table *tablePtr. * *---------------------------------------------------------------------- */ static void ClearHash( Tcl_HashTable *tablePtr) { Tcl_HashSearch search; Tcl_HashEntry *hPtr; for (hPtr = Tcl_FirstHashEntry(tablePtr, &search); hPtr != NULL; hPtr = Tcl_NextHashEntry(&search)) { Tcl_Obj *objPtr = Tcl_GetHashValue(hPtr); Tcl_DecrRefCount(objPtr); Tcl_DeleteHashEntry(hPtr); } } /* *---------------------------------------------------------------------- * * GetThreadHash -- * * Get a thread-specific (Tcl_HashTable *) associated with a thread data * key. * * Results: * The Tcl_HashTable * corresponding to *keyPtr. * * Side effects: * The first call on a keyPtr in each thread creates a new Tcl_HashTable, * and registers a thread exit handler to dispose of it. * *---------------------------------------------------------------------- */ static Tcl_HashTable * GetThreadHash( Tcl_ThreadDataKey *keyPtr) { Tcl_HashTable **tablePtrPtr = Tcl_GetThreadData(keyPtr, sizeof(Tcl_HashTable *)); if (NULL == *tablePtrPtr) { *tablePtrPtr = Tcl_Alloc(sizeof(Tcl_HashTable)); Tcl_CreateThreadExitHandler(FreeThreadHash, *tablePtrPtr); Tcl_InitHashTable(*tablePtrPtr, TCL_ONE_WORD_KEYS); } return *tablePtrPtr; } /* *---------------------------------------------------------------------- * * FreeThreadHash -- * * Thread exit handler used by GetThreadHash to dispose of a thread hash * table. * * Side effects: * Frees a Tcl_HashTable. * *---------------------------------------------------------------------- */ static void FreeThreadHash( ClientData clientData) { Tcl_HashTable *tablePtr = clientData; ClearHash(tablePtr); Tcl_DeleteHashTable(tablePtr); Tcl_Free(tablePtr); } /* *---------------------------------------------------------------------- * * FreeProcessGlobalValue -- * * Exit handler used by Tcl(Set|Get)ProcessGlobalValue to cleanup a * ProcessGlobalValue at exit. * *---------------------------------------------------------------------- */ static void FreeProcessGlobalValue( ClientData clientData) { ProcessGlobalValue *pgvPtr = clientData; pgvPtr->epoch++; pgvPtr->numBytes = 0; Tcl_Free(pgvPtr->value); pgvPtr->value = NULL; if (pgvPtr->encoding) { Tcl_FreeEncoding(pgvPtr->encoding); pgvPtr->encoding = NULL; } Tcl_MutexFinalize(&pgvPtr->mutex); } /* *---------------------------------------------------------------------- * * TclSetProcessGlobalValue -- * * Utility routine to set a global value shared by all threads in the * process while keeping a thread-local copy as well. * *---------------------------------------------------------------------- */ void TclSetProcessGlobalValue( ProcessGlobalValue *pgvPtr, Tcl_Obj *newValue, Tcl_Encoding encoding) { const char *bytes; Tcl_HashTable *cacheMap; Tcl_HashEntry *hPtr; int dummy; Tcl_MutexLock(&pgvPtr->mutex); /* * Fill the global string value. */ pgvPtr->epoch++; if (NULL != pgvPtr->value) { Tcl_Free(pgvPtr->value); } else { Tcl_CreateExitHandler(FreeProcessGlobalValue, pgvPtr); } bytes = TclGetString(newValue); pgvPtr->numBytes = newValue->length; pgvPtr->value = Tcl_Alloc(pgvPtr->numBytes + 1); memcpy(pgvPtr->value, bytes, pgvPtr->numBytes + 1); if (pgvPtr->encoding) { Tcl_FreeEncoding(pgvPtr->encoding); } pgvPtr->encoding = encoding; /* * Fill the local thread copy directly with the Tcl_Obj value to avoid * loss of the intrep. Increment newValue refCount early to handle case * where we set a PGV to itself. */ Tcl_IncrRefCount(newValue); cacheMap = GetThreadHash(&pgvPtr->key); ClearHash(cacheMap); hPtr = Tcl_CreateHashEntry(cacheMap, INT2PTR(pgvPtr->epoch), &dummy); Tcl_SetHashValue(hPtr, newValue); Tcl_MutexUnlock(&pgvPtr->mutex); } /* *---------------------------------------------------------------------- * * TclGetProcessGlobalValue -- * * Retrieve a global value shared among all threads of the process, * preferring a thread-local copy as long as it remains valid. * * Results: * Returns a (Tcl_Obj *) that holds a copy of the global value. * *---------------------------------------------------------------------- */ Tcl_Obj * TclGetProcessGlobalValue( ProcessGlobalValue *pgvPtr) { Tcl_Obj *value = NULL; Tcl_HashTable *cacheMap; Tcl_HashEntry *hPtr; size_t epoch = pgvPtr->epoch; if (pgvPtr->encoding) { Tcl_Encoding current = Tcl_GetEncoding(NULL, NULL); if (pgvPtr->encoding != current) { /* * The system encoding has changed since the master string value * was saved. Convert the master value to be based on the new * system encoding. */ Tcl_DString native, newValue; Tcl_MutexLock(&pgvPtr->mutex); epoch = ++pgvPtr->epoch; Tcl_UtfToExternalDString(pgvPtr->encoding, pgvPtr->value, pgvPtr->numBytes, &native); Tcl_ExternalToUtfDString(current, Tcl_DStringValue(&native), Tcl_DStringLength(&native), &newValue); Tcl_DStringFree(&native); Tcl_Free(pgvPtr->value); pgvPtr->value = Tcl_Alloc(Tcl_DStringLength(&newValue) + 1); memcpy(pgvPtr->value, Tcl_DStringValue(&newValue), Tcl_DStringLength(&newValue) + 1); Tcl_DStringFree(&newValue); Tcl_FreeEncoding(pgvPtr->encoding); pgvPtr->encoding = current; Tcl_MutexUnlock(&pgvPtr->mutex); } else { Tcl_FreeEncoding(current); } } cacheMap = GetThreadHash(&pgvPtr->key); hPtr = Tcl_FindHashEntry(cacheMap, INT2PTR(epoch)); if (NULL == hPtr) { int dummy; /* * No cache for the current epoch - must be a new one. * * First, clear the cacheMap, as anything in it must refer to some * expired epoch. */ ClearHash(cacheMap); /* * If no thread has set the shared value, call the initializer. */ Tcl_MutexLock(&pgvPtr->mutex); if ((NULL == pgvPtr->value) && (pgvPtr->proc)) { pgvPtr->epoch++; pgvPtr->proc(&pgvPtr->value,&pgvPtr->numBytes,&pgvPtr->encoding); if (pgvPtr->value == NULL) { Tcl_Panic("PGV Initializer did not initialize"); } Tcl_CreateExitHandler(FreeProcessGlobalValue, pgvPtr); } /* * Store a copy of the shared value in our epoch-indexed cache. */ value = Tcl_NewStringObj(pgvPtr->value, pgvPtr->numBytes); hPtr = Tcl_CreateHashEntry(cacheMap, INT2PTR(pgvPtr->epoch), &dummy); Tcl_MutexUnlock(&pgvPtr->mutex); Tcl_SetHashValue(hPtr, value); Tcl_IncrRefCount(value); } return Tcl_GetHashValue(hPtr); } /* *---------------------------------------------------------------------- * * TclSetObjNameOfExecutable -- * * This function stores the absolute pathname of the executable file * (normally as computed by TclpFindExecutable). * * Results: * None. * * Side effects: * Stores the executable name. * *---------------------------------------------------------------------- */ void TclSetObjNameOfExecutable( Tcl_Obj *name, Tcl_Encoding encoding) { TclSetProcessGlobalValue(&executableName, name, encoding); } /* *---------------------------------------------------------------------- * * TclGetObjNameOfExecutable -- * * This function retrieves the absolute pathname of the application in * which the Tcl library is running, usually as previously stored by * TclpFindExecutable(). This function call is the C API equivalent to * the "info nameofexecutable" command. * * Results: * A pointer to an "fsPath" Tcl_Obj, or to an empty Tcl_Obj if the * pathname of the application is unknown. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Obj * TclGetObjNameOfExecutable(void) { return TclGetProcessGlobalValue(&executableName); } /* *---------------------------------------------------------------------- * * Tcl_GetNameOfExecutable -- * * This function retrieves the absolute pathname of the application in * which the Tcl library is running, and returns it in string form. * * The returned string belongs to Tcl and should be copied if the caller * plans to keep it, to guard against it becoming invalid. * * Results: * A pointer to the internal string or NULL if the internal full path * name has not been computed or unknown. * * Side effects: * None. * *---------------------------------------------------------------------- */ const char * Tcl_GetNameOfExecutable(void) { Tcl_Obj *obj = TclGetObjNameOfExecutable(); const char *bytes = TclGetString(obj); if (obj->length == 0) { return NULL; } return bytes; } /* *---------------------------------------------------------------------- * * TclGetPlatform -- * * This is a kludge that allows the test library to get access the * internal tclPlatform variable. * * Results: * Returns a pointer to the tclPlatform variable. * * Side effects: * None. * *---------------------------------------------------------------------- */ TclPlatformType * TclGetPlatform(void) { return &tclPlatform; } /* *---------------------------------------------------------------------- * * TclReToGlob -- * * Attempt to convert a regular expression to an equivalent glob pattern. * * Results: * Returns TCL_OK on success, TCL_ERROR on failure. If interp is not * NULL, an error message is placed in the result. On success, the * DString will contain an exact equivalent glob pattern. The caller is * responsible for calling Tcl_DStringFree on success. If exactPtr is not * NULL, it will be 1 if an exact match qualifies. * * Side effects: * None. * *---------------------------------------------------------------------- */ int TclReToGlob( Tcl_Interp *interp, const char *reStr, size_t reStrLen, Tcl_DString *dsPtr, int *exactPtr, int *quantifiersFoundPtr) { int anchorLeft, anchorRight, lastIsStar, numStars; char *dsStr, *dsStrStart; const char *msg, *p, *strEnd, *code; strEnd = reStr + reStrLen; Tcl_DStringInit(dsPtr); if (quantifiersFoundPtr != NULL) { *quantifiersFoundPtr = 0; } /* * "***=xxx" == "*xxx*", watch for glob-sensitive chars. */ if ((reStrLen >= 4) && (memcmp("***=", reStr, 4) == 0)) { /* * At most, the glob pattern has length 2*reStrLen + 2 to backslash * escape every character and have * at each end. */ Tcl_DStringSetLength(dsPtr, reStrLen + 2); dsStr = dsStrStart = Tcl_DStringValue(dsPtr); *dsStr++ = '*'; for (p = reStr + 4; p < strEnd; p++) { switch (*p) { case '\\': case '*': case '[': case ']': case '?': /* Only add \ where necessary for glob */ *dsStr++ = '\\'; /* fall through */ default: *dsStr++ = *p; break; } } *dsStr++ = '*'; Tcl_DStringSetLength(dsPtr, dsStr - dsStrStart); if (exactPtr) { *exactPtr = 0; } return TCL_OK; } /* * At most, the glob pattern has length reStrLen + 2 to account for * possible * at each end. */ Tcl_DStringSetLength(dsPtr, reStrLen + 2); dsStr = dsStrStart = Tcl_DStringValue(dsPtr); /* * Check for anchored REs (ie ^foo$), so we can use string equal if * possible. Do not alter the start of str so we can free it correctly. * * Keep track of the last char being an unescaped star to prevent multiple * instances. Simpler than checking that the last star may be escaped. */ msg = NULL; code = NULL; p = reStr; anchorRight = 0; lastIsStar = 0; numStars = 0; if (*p == '^') { anchorLeft = 1; p++; } else { anchorLeft = 0; *dsStr++ = '*'; lastIsStar = 1; } for ( ; p < strEnd; p++) { switch (*p) { case '\\': p++; switch (*p) { case 'a': *dsStr++ = '\a'; break; case 'b': *dsStr++ = '\b'; break; case 'f': *dsStr++ = '\f'; break; case 'n': *dsStr++ = '\n'; break; case 'r': *dsStr++ = '\r'; break; case 't': *dsStr++ = '\t'; break; case 'v': *dsStr++ = '\v'; break; case 'B': case '\\': *dsStr++ = '\\'; *dsStr++ = '\\'; anchorLeft = 0; /* prevent exact match */ break; case '*': case '[': case ']': case '?': /* Only add \ where necessary for glob */ *dsStr++ = '\\'; anchorLeft = 0; /* prevent exact match */ /* fall through */ case '{': case '}': case '(': case ')': case '+': case '.': case '|': case '^': case '$': *dsStr++ = *p; break; default: msg = "invalid escape sequence"; code = "BADESCAPE"; goto invalidGlob; } break; case '.': if (quantifiersFoundPtr != NULL) { *quantifiersFoundPtr = 1; } anchorLeft = 0; /* prevent exact match */ if (p+1 < strEnd) { if (p[1] == '*') { p++; if (!lastIsStar) { *dsStr++ = '*'; lastIsStar = 1; numStars++; } continue; } else if (p[1] == '+') { p++; *dsStr++ = '?'; *dsStr++ = '*'; lastIsStar = 1; numStars++; continue; } } *dsStr++ = '?'; break; case '$': if (p+1 != strEnd) { msg = "$ not anchor"; code = "NONANCHOR"; goto invalidGlob; } anchorRight = 1; break; case '*': case '+': case '?': case '|': case '^': case '{': case '}': case '(': case ')': case '[': case ']': msg = "unhandled RE special char"; code = "UNHANDLED"; goto invalidGlob; default: *dsStr++ = *p; break; } lastIsStar = 0; } if (numStars > 1) { /* * Heuristic: if >1 non-anchoring *, the risk is large that glob * matching is slower than the RE engine, so report invalid. */ msg = "excessive recursive glob backtrack potential"; code = "OVERCOMPLEX"; goto invalidGlob; } if (!anchorRight && !lastIsStar) { *dsStr++ = '*'; } Tcl_DStringSetLength(dsPtr, dsStr - dsStrStart); if (exactPtr) { *exactPtr = (anchorLeft && anchorRight); } return TCL_OK; invalidGlob: if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_NewStringObj(msg, -1)); Tcl_SetErrorCode(interp, "TCL", "RE2GLOB", code, NULL); } Tcl_DStringFree(dsPtr); return TCL_ERROR; } /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */