/* * tclZlib.c -- * * This file provides the interface to the Zlib library. * * Copyright (C) 2004-2005 Pascal Scheffers * Copyright (C) 2005 Unitas Software B.V. * Copyright (c) 2008-2012 Donal K. Fellows * * Parts written by Jean-Claude Wippler, as part of Tclkit, placed in the * public domain March 2003. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. */ #include "tclInt.h" #ifdef HAVE_ZLIB #include /* * Magic flags used with wbits fields to indicate that we're handling the gzip * format or automatic detection of format. Putting it here is slightly less * gross! */ #define WBITS_RAW (-MAX_WBITS) #define WBITS_ZLIB (MAX_WBITS) #define WBITS_GZIP (MAX_WBITS | 16) #define WBITS_AUTODETECT (MAX_WBITS | 32) /* * Structure used for handling gzip headers that are generated from a * dictionary. It comprises the header structure itself plus some working * space that it is very convenient to have attached. */ #define MAX_COMMENT_LEN 256 typedef struct { gz_header header; char nativeFilenameBuf[MAXPATHLEN]; char nativeCommentBuf[MAX_COMMENT_LEN]; } GzipHeader; /* * Structure used for the Tcl_ZlibStream* commands and [zlib stream ...] */ typedef struct { Tcl_Interp *interp; z_stream stream; /* The interface to the zlib library. */ int streamEnd; /* If we've got to end-of-stream. */ Tcl_Obj *inData, *outData; /* Input / output buffers (lists) */ Tcl_Obj *currentInput; /* Pointer to what is currently being * inflated. */ int outPos; int mode; /* Either TCL_ZLIB_STREAM_DEFLATE or * TCL_ZLIB_STREAM_INFLATE. */ int format; /* Flags from the TCL_ZLIB_FORMAT_* */ int level; /* Default 5, 0-9 */ int flush; /* Stores the flush param for deferred the * decompression. */ int wbits; /* The encoded compression mode, so we can * restart the stream if necessary. */ Tcl_Command cmd; /* Token for the associated Tcl command. */ Tcl_Obj *compDictObj; /* Byte-array object containing compression * dictionary (not dictObj!) to use if * necessary. */ int flags; /* Miscellaneous flag bits. */ GzipHeader *gzHeaderPtr; /* If we've allocated a gzip header * structure. */ } ZlibStreamHandle; #define DICT_TO_SET 0x1 /* If we need to set a compression dictionary * in the low-level engine at the next * opportunity. */ /* * Structure used for stacked channel compression and decompression. */ typedef struct { Tcl_Channel chan; /* Reference to the channel itself. */ Tcl_Channel parent; /* The underlying source and sink of bytes. */ int flags; /* General flag bits, see below... */ int mode; /* Either the value TCL_ZLIB_STREAM_DEFLATE * for compression on output, or * TCL_ZLIB_STREAM_INFLATE for decompression * on input. */ int format; /* What format of data is going on the wire. * Needed so that the correct [fconfigure] * options can be enabled. */ z_stream inStream; /* Structure used by zlib for decompression of * input. */ z_stream outStream; /* Structure used by zlib for compression of * output. */ char *inBuffer, *outBuffer; /* Working buffers. */ int inAllocated, outAllocated; /* Sizes of working buffers. */ GzipHeader inHeader; /* Header read from input stream, when * decompressing a gzip stream. */ GzipHeader outHeader; /* Header to write to an output stream, when * compressing a gzip stream. */ Tcl_TimerToken timer; /* Timer used for keeping events fresh. */ Tcl_Obj *compDictObj; /* Byte-array object containing compression * dictionary (not dictObj!) to use if * necessary. */ } ZlibChannelData; /* * Value bits for the flags field. Definitions are: * ASYNC - Whether this is an asynchronous channel. * IN_HEADER - Whether the inHeader field has been registered with * the input compressor. * OUT_HEADER - Whether the outputHeader field has been registered * with the output decompressor. */ #define ASYNC 0x1 #define IN_HEADER 0x2 #define OUT_HEADER 0x4 /* * Size of buffers allocated by default. Should be enough... */ #define DEFAULT_BUFFER_SIZE 4096 /* * Time to wait (in milliseconds) before flushing the channel when reading * data through the transform. */ #define TRANSFORM_FLUSH_DELAY 5 /* * Prototypes for private procedures defined later in this file: */ static Tcl_CmdDeleteProc ZlibStreamCmdDelete; static Tcl_DriverBlockModeProc ZlibTransformBlockMode; static Tcl_DriverCloseProc ZlibTransformClose; static Tcl_DriverGetHandleProc ZlibTransformGetHandle; static Tcl_DriverGetOptionProc ZlibTransformGetOption; static Tcl_DriverHandlerProc ZlibTransformHandler; static Tcl_DriverInputProc ZlibTransformInput; static Tcl_DriverOutputProc ZlibTransformOutput; static Tcl_DriverSetOptionProc ZlibTransformSetOption; static Tcl_DriverWatchProc ZlibTransformWatch; static Tcl_ObjCmdProc ZlibCmd; static Tcl_ObjCmdProc ZlibStreamCmd; static void ConvertError(Tcl_Interp *interp, int code); static void ExtractHeader(gz_header *headerPtr, Tcl_Obj *dictObj); static int GenerateHeader(Tcl_Interp *interp, Tcl_Obj *dictObj, GzipHeader *headerPtr, int *extraSizePtr); static int ZlibPushSubcmd(Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static Tcl_Channel ZlibStackChannelTransform(Tcl_Interp *interp, int mode, int format, int level, Tcl_Channel channel, Tcl_Obj *gzipHeaderDictPtr, Tcl_Obj *compDictObj); static void ZlibStreamCleanup(ZlibStreamHandle *zshPtr); static int ZlibStreamSubcmd(Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static void ZlibTransformTimerKill(ZlibChannelData *cd); static void ZlibTransformTimerRun(ClientData clientData); static void ZlibTransformTimerSetup(ZlibChannelData *cd); /* * Type of zlib-based compressing and decompressing channels. */ static const Tcl_ChannelType zlibChannelType = { "zlib", TCL_CHANNEL_VERSION_3, ZlibTransformClose, ZlibTransformInput, ZlibTransformOutput, NULL, /* seekProc */ ZlibTransformSetOption, ZlibTransformGetOption, ZlibTransformWatch, ZlibTransformGetHandle, NULL, /* close2Proc */ ZlibTransformBlockMode, NULL, /* flushProc */ ZlibTransformHandler, NULL, /* wideSeekProc */ NULL, NULL }; /* *---------------------------------------------------------------------- * * ConvertError -- * * Utility function for converting a zlib error into a Tcl error. * * Results: * None. * * Side effects: * Updates the interpreter result and errorcode. * *---------------------------------------------------------------------- */ static void ConvertError( Tcl_Interp *interp, /* Interpreter to store the error in. May be * NULL, in which case nothing happens. */ int code) /* The zlib error code. */ { if (interp == NULL) { return; } if (code == Z_ERRNO) { Tcl_SetObjResult(interp, Tcl_NewStringObj(Tcl_PosixError(interp),-1)); } else { const char *codeStr, *codeStr2 = NULL; char codeStrBuf[TCL_INTEGER_SPACE]; switch (code) { case Z_STREAM_ERROR: codeStr = "STREAM"; break; case Z_DATA_ERROR: codeStr = "DATA"; break; case Z_MEM_ERROR: codeStr = "MEM"; break; case Z_BUF_ERROR: codeStr = "BUF"; break; case Z_VERSION_ERROR: codeStr = "VERSION"; break; case Z_NEED_DICT: codeStr = "NEED_DICT"; break; default: codeStr = "unknown"; codeStr2 = codeStrBuf; sprintf(codeStrBuf, "%d", code); break; } Tcl_SetObjResult(interp, Tcl_NewStringObj(zError(code), -1)); /* * Tricky point! We might pass NULL twice here (and will when the * error type is known). */ Tcl_SetErrorCode(interp, "TCL", "ZLIB", codeStr, codeStr2, NULL); } } /* *---------------------------------------------------------------------- * * GenerateHeader -- * * Function for creating a gzip header from the contents of a dictionary * (as described in the documentation). GetValue is a helper function. * * Results: * A Tcl result code. * * Side effects: * Updates the fields of the given gz_header structure. Adds amount of * extra space required for the header to the variable referenced by the * extraSizePtr argument. * *---------------------------------------------------------------------- */ static inline int GetValue( Tcl_Interp *interp, Tcl_Obj *dictObj, const char *nameStr, Tcl_Obj **valuePtrPtr) { Tcl_Obj *name = Tcl_NewStringObj(nameStr, -1); int result = Tcl_DictObjGet(interp, dictObj, name, valuePtrPtr); TclDecrRefCount(name); return result; } static int GenerateHeader( Tcl_Interp *interp, /* Where to put error messages. */ Tcl_Obj *dictObj, /* The dictionary whose contents are to be * parsed. */ GzipHeader *headerPtr, /* Where to store the parsed-out values. */ int *extraSizePtr) /* Variable to add the length of header * strings (filename, comment) to. */ { Tcl_Obj *value; int len, result = TCL_ERROR; const char *valueStr; Tcl_Encoding latin1enc; static const char *const types[] = { "binary", "text" }; /* * RFC 1952 says that header strings are in ISO 8859-1 (LATIN-1). */ latin1enc = Tcl_GetEncoding(NULL, "iso8859-1"); if (latin1enc == NULL) { Tcl_Panic("no latin-1 encoding"); } if (GetValue(interp, dictObj, "comment", &value) != TCL_OK) { goto error; } else if (value != NULL) { valueStr = Tcl_GetStringFromObj(value, &len); Tcl_UtfToExternal(NULL, latin1enc, valueStr, len, 0, NULL, headerPtr->nativeCommentBuf, MAX_COMMENT_LEN-1, NULL, &len, NULL); headerPtr->nativeCommentBuf[len] = '\0'; headerPtr->header.comment = (Bytef *) headerPtr->nativeCommentBuf; if (extraSizePtr != NULL) { *extraSizePtr += len; } } if (GetValue(interp, dictObj, "crc", &value) != TCL_OK) { goto error; } else if (value != NULL && Tcl_GetBooleanFromObj(interp, value, &headerPtr->header.hcrc)) { goto error; } if (GetValue(interp, dictObj, "filename", &value) != TCL_OK) { goto error; } else if (value != NULL) { valueStr = Tcl_GetStringFromObj(value, &len); Tcl_UtfToExternal(NULL, latin1enc, valueStr, len, 0, NULL, headerPtr->nativeFilenameBuf, MAXPATHLEN-1, NULL, &len, NULL); headerPtr->nativeFilenameBuf[len] = '\0'; headerPtr->header.name = (Bytef *) headerPtr->nativeFilenameBuf; if (extraSizePtr != NULL) { *extraSizePtr += len; } } if (GetValue(interp, dictObj, "os", &value) != TCL_OK) { goto error; } else if (value != NULL && Tcl_GetIntFromObj(interp, value, &headerPtr->header.os) != TCL_OK) { goto error; } /* * Ignore the 'size' field, since that is controlled by the size of the * input data. */ if (GetValue(interp, dictObj, "time", &value) != TCL_OK) { goto error; } else if (value != NULL && Tcl_GetLongFromObj(interp, value, (long *) &headerPtr->header.time) != TCL_OK) { goto error; } if (GetValue(interp, dictObj, "type", &value) != TCL_OK) { goto error; } else if (value != NULL && Tcl_GetIndexFromObj(interp, value, types, "type", TCL_EXACT, &headerPtr->header.text) != TCL_OK) { goto error; } result = TCL_OK; error: Tcl_FreeEncoding(latin1enc); return result; } /* *---------------------------------------------------------------------- * * ExtractHeader -- * * Take the values out of a gzip header and store them in a dictionary. * SetValue is a helper function. * * Results: * None. * * Side effects: * Updates the dictionary, which must be writable (i.e. refCount < 2). * *---------------------------------------------------------------------- */ static inline void SetValue( Tcl_Obj *dictObj, const char *key, Tcl_Obj *value) { Tcl_Obj *keyObj = Tcl_NewStringObj(key, -1); Tcl_IncrRefCount(keyObj); Tcl_DictObjPut(NULL, dictObj, keyObj, value); TclDecrRefCount(keyObj); } static void ExtractHeader( gz_header *headerPtr, /* The gzip header to extract from. */ Tcl_Obj *dictObj) /* The dictionary to store in. */ { Tcl_Encoding latin1enc = NULL; Tcl_DString tmp; if (headerPtr->comment != Z_NULL) { if (latin1enc == NULL) { /* * RFC 1952 says that header strings are in ISO 8859-1 (LATIN-1). */ latin1enc = Tcl_GetEncoding(NULL, "iso8859-1"); if (latin1enc == NULL) { Tcl_Panic("no latin-1 encoding"); } } Tcl_ExternalToUtfDString(latin1enc, (char *) headerPtr->comment, -1, &tmp); SetValue(dictObj, "comment", TclDStringToObj(&tmp)); } SetValue(dictObj, "crc", Tcl_NewBooleanObj(headerPtr->hcrc)); if (headerPtr->name != Z_NULL) { if (latin1enc == NULL) { /* * RFC 1952 says that header strings are in ISO 8859-1 (LATIN-1). */ latin1enc = Tcl_GetEncoding(NULL, "iso8859-1"); if (latin1enc == NULL) { Tcl_Panic("no latin-1 encoding"); } } Tcl_ExternalToUtfDString(latin1enc, (char *) headerPtr->name, -1, &tmp); SetValue(dictObj, "filename", TclDStringToObj(&tmp)); } if (headerPtr->os != 255) { SetValue(dictObj, "os", Tcl_NewIntObj(headerPtr->os)); } if (headerPtr->time != 0 /* magic - no time */) { SetValue(dictObj, "time", Tcl_NewLongObj((long) headerPtr->time)); } if (headerPtr->text != Z_UNKNOWN) { SetValue(dictObj, "type", Tcl_NewStringObj(headerPtr->text ? "text" : "binary", -1)); } if (latin1enc != NULL) { Tcl_FreeEncoding(latin1enc); } } static int SetInflateDictionary( z_streamp strm, Tcl_Obj *compDictObj) { if (compDictObj != NULL) { int length; unsigned char *bytes = Tcl_GetByteArrayFromObj(compDictObj, &length); return inflateSetDictionary(strm, bytes, (unsigned) length); } return Z_OK; } static int SetDeflateDictionary( z_streamp strm, Tcl_Obj *compDictObj) { if (compDictObj != NULL) { int length; unsigned char *bytes = Tcl_GetByteArrayFromObj(compDictObj, &length); return deflateSetDictionary(strm, bytes, (unsigned) length); } return Z_OK; } /* *---------------------------------------------------------------------- * * Tcl_ZlibStreamInit -- * * This command initializes a (de)compression context/handle for * (de)compressing data in chunks. * * Results: * A standard Tcl result. * * Side effects: * The variable pointed to by zshandlePtr is initialised and memory * allocated for internal state. Additionally, if interp is not null, a * Tcl command is created and its name placed in the interp result obj. * * Note: * At least one of interp and zshandlePtr should be non-NULL or the * reference to the stream will be completely lost. * *---------------------------------------------------------------------- */ int Tcl_ZlibStreamInit( Tcl_Interp *interp, int mode, /* Either TCL_ZLIB_STREAM_INFLATE or * TCL_ZLIB_STREAM_DEFLATE. */ int format, /* Flags from the TCL_ZLIB_FORMAT_* set. */ int level, /* 0-9 or TCL_ZLIB_COMPRESS_DEFAULT. */ Tcl_Obj *dictObj, /* Dictionary containing headers for gzip. */ Tcl_ZlibStream *zshandlePtr) { int wbits = 0; int e; ZlibStreamHandle *zshPtr = NULL; Tcl_DString cmdname; Tcl_CmdInfo cmdinfo; GzipHeader *gzHeaderPtr = NULL; switch (mode) { case TCL_ZLIB_STREAM_DEFLATE: /* * Compressed format is specified by the wbits parameter. See zlib.h * for details. */ switch (format) { case TCL_ZLIB_FORMAT_RAW: wbits = WBITS_RAW; break; case TCL_ZLIB_FORMAT_GZIP: wbits = WBITS_GZIP; if (dictObj) { gzHeaderPtr = ckalloc(sizeof(GzipHeader)); memset(gzHeaderPtr, 0, sizeof(GzipHeader)); if (GenerateHeader(interp, dictObj, gzHeaderPtr, NULL) != TCL_OK) { ckfree(gzHeaderPtr); return TCL_ERROR; } } break; case TCL_ZLIB_FORMAT_ZLIB: wbits = WBITS_ZLIB; break; default: Tcl_Panic("incorrect zlib data format, must be " "TCL_ZLIB_FORMAT_ZLIB, TCL_ZLIB_FORMAT_GZIP or " "TCL_ZLIB_FORMAT_RAW"); } if (level < -1 || level > 9) { Tcl_Panic("compression level should be between 0 (no compression)" " and 9 (best compression) or -1 for default compression " "level"); } break; case TCL_ZLIB_STREAM_INFLATE: /* * wbits are the same as DEFLATE, but FORMAT_AUTO is valid too. */ switch (format) { case TCL_ZLIB_FORMAT_RAW: wbits = WBITS_RAW; break; case TCL_ZLIB_FORMAT_GZIP: wbits = WBITS_GZIP; gzHeaderPtr = ckalloc(sizeof(GzipHeader)); memset(gzHeaderPtr, 0, sizeof(GzipHeader)); gzHeaderPtr->header.name = (Bytef *) gzHeaderPtr->nativeFilenameBuf; gzHeaderPtr->header.name_max = MAXPATHLEN - 1; gzHeaderPtr->header.comment = (Bytef *) gzHeaderPtr->nativeCommentBuf; gzHeaderPtr->header.name_max = MAX_COMMENT_LEN - 1; break; case TCL_ZLIB_FORMAT_ZLIB: wbits = WBITS_ZLIB; break; case TCL_ZLIB_FORMAT_AUTO: wbits = WBITS_AUTODETECT; break; default: Tcl_Panic("incorrect zlib data format, must be " "TCL_ZLIB_FORMAT_ZLIB, TCL_ZLIB_FORMAT_GZIP, " "TCL_ZLIB_FORMAT_RAW or TCL_ZLIB_FORMAT_AUTO"); } break; default: Tcl_Panic("bad mode, must be TCL_ZLIB_STREAM_DEFLATE or" " TCL_ZLIB_STREAM_INFLATE"); } zshPtr = ckalloc(sizeof(ZlibStreamHandle)); zshPtr->interp = interp; zshPtr->mode = mode; zshPtr->format = format; zshPtr->level = level; zshPtr->wbits = wbits; zshPtr->currentInput = NULL; zshPtr->streamEnd = 0; zshPtr->compDictObj = NULL; zshPtr->flags = 0; zshPtr->gzHeaderPtr = gzHeaderPtr; memset(&zshPtr->stream, 0, sizeof(z_stream)); /* * No output buffer available yet */ if (mode == TCL_ZLIB_STREAM_DEFLATE) { e = deflateInit2(&zshPtr->stream, level, Z_DEFLATED, wbits, MAX_MEM_LEVEL, Z_DEFAULT_STRATEGY); if (e == Z_OK && zshPtr->gzHeaderPtr) { e = deflateSetHeader(&zshPtr->stream, &zshPtr->gzHeaderPtr->header); } if (e == Z_OK && zshPtr->compDictObj) { e = SetDeflateDictionary(&zshPtr->stream, zshPtr->compDictObj); } } else { e = inflateInit2(&zshPtr->stream, wbits); if (e == Z_OK && zshPtr->gzHeaderPtr) { e = inflateGetHeader(&zshPtr->stream, &zshPtr->gzHeaderPtr->header); } if (format==TCL_ZLIB_FORMAT_RAW && zshPtr->compDictObj && e==Z_OK) { e = SetInflateDictionary(&zshPtr->stream, zshPtr->compDictObj); } } if (e != Z_OK) { ConvertError(interp, e); goto error; } /* * I could do all this in C, but this is easier. */ if (interp != NULL) { if (Tcl_Eval(interp, "::incr ::tcl::zlib::cmdcounter") != TCL_OK) { goto error; } Tcl_DStringInit(&cmdname); Tcl_DStringAppend(&cmdname, "::tcl::zlib::streamcmd_", -1); Tcl_DStringAppend(&cmdname, Tcl_GetString(Tcl_GetObjResult(interp)), -1); if (Tcl_GetCommandInfo(interp, Tcl_DStringValue(&cmdname), &cmdinfo) == 1) { Tcl_SetResult(interp, "BUG: Stream command name already exists", TCL_STATIC); Tcl_SetErrorCode(interp, "TCL", "BUG", "EXISTING_CMD", NULL); Tcl_DStringFree(&cmdname); goto error; } Tcl_ResetResult(interp); /* * Create the command. */ zshPtr->cmd = Tcl_CreateObjCommand(interp, Tcl_DStringValue(&cmdname), ZlibStreamCmd, zshPtr, ZlibStreamCmdDelete); Tcl_DStringFree(&cmdname); if (zshPtr->cmd == NULL) { goto error; } } else { zshPtr->cmd = NULL; } /* * Prepare the buffers for use. */ zshPtr->inData = Tcl_NewListObj(0, NULL); Tcl_IncrRefCount(zshPtr->inData); zshPtr->outData = Tcl_NewListObj(0, NULL); Tcl_IncrRefCount(zshPtr->outData); zshPtr->outPos = 0; /* * Now set the variable pointed to by *zshandlePtr to the pointer to the * zsh struct. */ if (zshandlePtr) { *zshandlePtr = (Tcl_ZlibStream) zshPtr; } return TCL_OK; error: if (zshPtr->compDictObj) { Tcl_DecrRefCount(zshPtr->compDictObj); } if (zshPtr->gzHeaderPtr) { ckfree(zshPtr->gzHeaderPtr); } ckfree(zshPtr); return TCL_ERROR; } /* *---------------------------------------------------------------------- * * ZlibStreamCmdDelete -- * * This is the delete command which Tcl invokes when a zlibstream command * is deleted from the interpreter (on stream close, usually). * * Results: * None * * Side effects: * Invalidates the zlib stream handle as obtained from Tcl_ZlibStreamInit * *---------------------------------------------------------------------- */ static void ZlibStreamCmdDelete( ClientData cd) { ZlibStreamHandle *zshPtr = cd; zshPtr->cmd = NULL; ZlibStreamCleanup(zshPtr); } /* *---------------------------------------------------------------------- * * Tcl_ZlibStreamClose -- * * This procedure must be called after (de)compression is done to ensure * memory is freed and the command is deleted from the interpreter (if * any). * * Results: * A standard Tcl result. * * Side effects: * Invalidates the zlib stream handle as obtained from Tcl_ZlibStreamInit * *---------------------------------------------------------------------- */ int Tcl_ZlibStreamClose( Tcl_ZlibStream zshandle) /* As obtained from Tcl_ZlibStreamInit. */ { ZlibStreamHandle *zshPtr = (ZlibStreamHandle *) zshandle; /* * If the interp is set, deleting the command will trigger * ZlibStreamCleanup in ZlibStreamCmdDelete. If no interp is set, call * ZlibStreamCleanup directly. */ if (zshPtr->interp && zshPtr->cmd) { Tcl_DeleteCommandFromToken(zshPtr->interp, zshPtr->cmd); } else { ZlibStreamCleanup(zshPtr); } return TCL_OK; } /* *---------------------------------------------------------------------- * * ZlibStreamCleanup -- * * This procedure is called by either Tcl_ZlibStreamClose or * ZlibStreamCmdDelete to cleanup the stream context. * * Results: * None * * Side effects: * Invalidates the zlib stream handle. * *---------------------------------------------------------------------- */ void ZlibStreamCleanup( ZlibStreamHandle *zshPtr) { if (!zshPtr->streamEnd) { if (zshPtr->mode == TCL_ZLIB_STREAM_DEFLATE) { deflateEnd(&zshPtr->stream); } else { inflateEnd(&zshPtr->stream); } } if (zshPtr->inData) { Tcl_DecrRefCount(zshPtr->inData); } if (zshPtr->outData) { Tcl_DecrRefCount(zshPtr->outData); } if (zshPtr->currentInput) { Tcl_DecrRefCount(zshPtr->currentInput); } if (zshPtr->compDictObj) { Tcl_DecrRefCount(zshPtr->compDictObj); } if (zshPtr->gzHeaderPtr) { ckfree(zshPtr->gzHeaderPtr); } ckfree(zshPtr); } /* *---------------------------------------------------------------------- * * Tcl_ZlibStreamReset -- * * This procedure will reinitialize an existing stream handle. * * Results: * A standard Tcl result. * * Side effects: * Any data left in the (de)compression buffer is lost. * *---------------------------------------------------------------------- */ int Tcl_ZlibStreamReset( Tcl_ZlibStream zshandle) /* As obtained from Tcl_ZlibStreamInit */ { ZlibStreamHandle *zshPtr = (ZlibStreamHandle *) zshandle; int e; if (!zshPtr->streamEnd) { if (zshPtr->mode == TCL_ZLIB_STREAM_DEFLATE) { deflateEnd(&zshPtr->stream); } else { inflateEnd(&zshPtr->stream); } } Tcl_SetByteArrayLength(zshPtr->inData, 0); Tcl_SetByteArrayLength(zshPtr->outData, 0); if (zshPtr->currentInput) { Tcl_DecrRefCount(zshPtr->currentInput); zshPtr->currentInput = NULL; } zshPtr->outPos = 0; zshPtr->streamEnd = 0; memset(&zshPtr->stream, 0, sizeof(z_stream)); /* * No output buffer available yet. */ if (zshPtr->mode == TCL_ZLIB_STREAM_DEFLATE) { e = deflateInit2(&zshPtr->stream, zshPtr->level, Z_DEFLATED, zshPtr->wbits, MAX_MEM_LEVEL, Z_DEFAULT_STRATEGY); if (e == Z_OK && zshPtr->compDictObj) { e = SetDeflateDictionary(&zshPtr->stream, zshPtr->compDictObj); } } else { e = inflateInit2(&zshPtr->stream, zshPtr->wbits); if (zshPtr->format == TCL_ZLIB_FORMAT_RAW && zshPtr->compDictObj && e == Z_OK) { e = SetInflateDictionary(&zshPtr->stream, zshPtr->compDictObj); } } if (e != Z_OK) { ConvertError(zshPtr->interp, e); /* TODO:cleanup */ return TCL_ERROR; } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_ZlibStreamGetCommandName -- * * This procedure will return the command name associated with the * stream. * * Results: * A Tcl_Obj with the name of the Tcl command or NULL if no command is * associated with the stream. * * Side effects: * None. * *---------------------------------------------------------------------- */ Tcl_Obj * Tcl_ZlibStreamGetCommandName( Tcl_ZlibStream zshandle) /* As obtained from Tcl_ZlibStreamInit */ { ZlibStreamHandle *zshPtr = (ZlibStreamHandle *) zshandle; Tcl_Obj *objPtr; if (!zshPtr->interp) { return NULL; } TclNewObj(objPtr); Tcl_GetCommandFullName(zshPtr->interp, zshPtr->cmd, objPtr); return objPtr; } /* *---------------------------------------------------------------------- * * Tcl_ZlibStreamEof -- * * This procedure This function returns 0 or 1 depending on the state of * the (de)compressor. For decompression, eof is reached when the entire * compressed stream has been decompressed. For compression, eof is * reached when the stream has been flushed with TCL_ZLIB_FINALIZE. * * Results: * Integer. * * Side effects: * None. * *---------------------------------------------------------------------- */ int Tcl_ZlibStreamEof( Tcl_ZlibStream zshandle) /* As obtained from Tcl_ZlibStreamInit */ { ZlibStreamHandle *zshPtr = (ZlibStreamHandle *) zshandle; return zshPtr->streamEnd; } /* *---------------------------------------------------------------------- * * Tcl_ZlibStreamChecksum -- * * Return the checksum of the uncompressed data seen so far by the * stream. * *---------------------------------------------------------------------- */ int Tcl_ZlibStreamChecksum( Tcl_ZlibStream zshandle) /* As obtained from Tcl_ZlibStreamInit */ { ZlibStreamHandle *zshPtr = (ZlibStreamHandle *) zshandle; return zshPtr->stream.adler; } /* *---------------------------------------------------------------------- * * Tcl_ZlibStreamSetCompressionDictionary -- * * Sets the compression dictionary for a stream. This will be used as * appropriate for the next compression or decompression action performed * on the stream. * *---------------------------------------------------------------------- */ void Tcl_ZlibStreamSetCompressionDictionary( Tcl_ZlibStream zshandle, Tcl_Obj *compressionDictionaryObj) { ZlibStreamHandle *zshPtr = (ZlibStreamHandle *) zshandle; if (compressionDictionaryObj != NULL) { Tcl_IncrRefCount(compressionDictionaryObj); zshPtr->flags |= DICT_TO_SET; } else { zshPtr->flags &= ~DICT_TO_SET; } if (zshPtr->compDictObj != NULL) { Tcl_DecrRefCount(zshPtr->compDictObj); } zshPtr->compDictObj = compressionDictionaryObj; } /* *---------------------------------------------------------------------- * * Tcl_ZlibStreamPut -- * * Add data to the stream for compression or decompression from a * bytearray Tcl_Obj. * *---------------------------------------------------------------------- */ int Tcl_ZlibStreamPut( Tcl_ZlibStream zshandle, /* As obtained from Tcl_ZlibStreamInit */ Tcl_Obj *data, /* Data to compress/decompress */ int flush) /* TCL_ZLIB_NO_FLUSH, TCL_ZLIB_FLUSH, * TCL_ZLIB_FULLFLUSH, or TCL_ZLIB_FINALIZE */ { ZlibStreamHandle *zshPtr = (ZlibStreamHandle *) zshandle; char *dataTmp = NULL; int e, size, outSize; Tcl_Obj *obj; if (zshPtr->streamEnd) { if (zshPtr->interp) { Tcl_SetResult(zshPtr->interp, "already past compressed stream end", TCL_STATIC); Tcl_SetErrorCode(zshPtr->interp, "TCL", "ZIP", "CLOSED", NULL); } return TCL_ERROR; } if (zshPtr->mode == TCL_ZLIB_STREAM_DEFLATE) { zshPtr->stream.next_in = Tcl_GetByteArrayFromObj(data, &size); zshPtr->stream.avail_in = size; if (zshPtr->flags & DICT_TO_SET) { e = SetDeflateDictionary(&zshPtr->stream, zshPtr->compDictObj); if (e != Z_OK) { if (zshPtr->interp) { ConvertError(zshPtr->interp, e); } return TCL_ERROR; } zshPtr->flags &= ~DICT_TO_SET; } /* * Deflatebound doesn't seem to take various header sizes into * account, so we add 100 extra bytes. */ outSize = deflateBound(&zshPtr->stream, zshPtr->stream.avail_in)+100; zshPtr->stream.avail_out = outSize; dataTmp = ckalloc(zshPtr->stream.avail_out); zshPtr->stream.next_out = (Bytef *) dataTmp; e = deflate(&zshPtr->stream, flush); if ((e==Z_OK || e==Z_BUF_ERROR) && (zshPtr->stream.avail_out == 0)) { if (outSize - zshPtr->stream.avail_out > 0) { /* * Output buffer too small. */ obj = Tcl_NewByteArrayObj((unsigned char *) dataTmp, outSize - zshPtr->stream.avail_out); /* * Now append the compressed data to the outData list. */ Tcl_ListObjAppendElement(NULL, zshPtr->outData, obj); } if (outSize < 0xFFFF) { outSize = 0xFFFF; /* There may be *lots* of data left to * output... */ ckfree(dataTmp); dataTmp = ckalloc(outSize); } zshPtr->stream.avail_out = outSize; zshPtr->stream.next_out = (Bytef *) dataTmp; e = deflate(&zshPtr->stream, flush); } if (e != Z_OK) { if (zshPtr->interp) { ConvertError(zshPtr->interp, e); } return TCL_ERROR; } /* * And append the final data block. */ if (outSize - zshPtr->stream.avail_out > 0) { obj = Tcl_NewByteArrayObj((unsigned char *) dataTmp, outSize - zshPtr->stream.avail_out); /* * Now append the compressed data to the outData list. */ Tcl_ListObjAppendElement(NULL, zshPtr->outData, obj); } if (dataTmp) { ckfree(dataTmp); } } else { /* * This is easy. Just append to the inData list. */ Tcl_ListObjAppendElement(NULL, zshPtr->inData, data); /* * and we'll need the flush parameter for the Inflate call. */ zshPtr->flush = flush; } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_ZlibStreamGet -- * * Retrieve data (now compressed or decompressed) from the stream into a * bytearray Tcl_Obj. * *---------------------------------------------------------------------- */ int Tcl_ZlibStreamGet( Tcl_ZlibStream zshandle, /* As obtained from Tcl_ZlibStreamInit */ Tcl_Obj *data, /* A place to append the data. */ int count) /* Number of bytes to grab as a maximum, you * may get less! */ { ZlibStreamHandle *zshPtr = (ZlibStreamHandle *) zshandle; int e, i, listLen, itemLen, dataPos = 0; Tcl_Obj *itemObj; unsigned char *dataPtr, *itemPtr; int existing; /* * Getting beyond the of stream, just return empty string. */ if (zshPtr->streamEnd) { return TCL_OK; } (void) Tcl_GetByteArrayFromObj(data, &existing); if (zshPtr->mode == TCL_ZLIB_STREAM_INFLATE) { if (count == -1) { /* * The only safe thing to do is restict to 65k. We might cause a * panic for out of memory if we just kept growing the buffer. */ count = 65536; } /* * Prepare the place to store the data. */ dataPtr = Tcl_SetByteArrayLength(data, existing+count); dataPtr += existing; zshPtr->stream.next_out = dataPtr; zshPtr->stream.avail_out = count; if (zshPtr->stream.avail_in == 0) { /* * zlib will probably need more data to decompress. */ if (zshPtr->currentInput) { Tcl_DecrRefCount(zshPtr->currentInput); zshPtr->currentInput = NULL; } Tcl_ListObjLength(NULL, zshPtr->inData, &listLen); if (listLen > 0) { /* * There is more input available, get it from the list and * give it to zlib. At this point, the data must not be shared * since we require the bytearray representation to not vanish * under our feet. [Bug 3081008] */ Tcl_ListObjIndex(NULL, zshPtr->inData, 0, &itemObj); if (Tcl_IsShared(itemObj)) { itemObj = Tcl_DuplicateObj(itemObj); } itemPtr = Tcl_GetByteArrayFromObj(itemObj, &itemLen); Tcl_IncrRefCount(itemObj); zshPtr->currentInput = itemObj; zshPtr->stream.next_in = itemPtr; zshPtr->stream.avail_in = itemLen; /* * And remove it from the list */ Tcl_ListObjReplace(NULL, zshPtr->inData, 0, 1, 0, NULL); } } e = inflate(&zshPtr->stream, zshPtr->flush); if (e == Z_NEED_DICT && zshPtr->compDictObj) { e = SetInflateDictionary(&zshPtr->stream, zshPtr->compDictObj); if (e == Z_OK) { e = inflate(&zshPtr->stream, zshPtr->flush); } }; Tcl_ListObjLength(NULL, zshPtr->inData, &listLen); while ((zshPtr->stream.avail_out > 0) && (e == Z_OK || e == Z_BUF_ERROR) && (listLen > 0)) { /* * State: We have not satisfied the request yet and there may be * more to inflate. */ if (zshPtr->stream.avail_in > 0) { if (zshPtr->interp) { Tcl_SetResult(zshPtr->interp, "Unexpected zlib internal state during decompression", TCL_STATIC); Tcl_SetErrorCode(zshPtr->interp, "TCL", "ZIP", "STATE", NULL); } Tcl_SetByteArrayLength(data, existing); return TCL_ERROR; } if (zshPtr->currentInput) { Tcl_DecrRefCount(zshPtr->currentInput); zshPtr->currentInput = 0; } /* * Get the next block of data to go to inflate. At this point, the * data must not be shared since we require the bytearray * representation to not vanish under our feet. [Bug 3081008] */ Tcl_ListObjIndex(zshPtr->interp, zshPtr->inData, 0, &itemObj); if (Tcl_IsShared(itemObj)) { itemObj = Tcl_DuplicateObj(itemObj); } itemPtr = Tcl_GetByteArrayFromObj(itemObj, &itemLen); Tcl_IncrRefCount(itemObj); zshPtr->currentInput = itemObj; zshPtr->stream.next_in = itemPtr; zshPtr->stream.avail_in = itemLen; /* * Remove it from the list. */ Tcl_ListObjReplace(NULL, zshPtr->inData, 0, 1, 0, NULL); listLen--; /* * And call inflate again. */ e = inflate(&zshPtr->stream, zshPtr->flush); if (e == Z_NEED_DICT && zshPtr->compDictObj) { e = SetInflateDictionary(&zshPtr->stream,zshPtr->compDictObj); if (e == Z_OK) { e = inflate(&zshPtr->stream, zshPtr->flush); } } } if (zshPtr->stream.avail_out > 0) { Tcl_SetByteArrayLength(data, existing + count - zshPtr->stream.avail_out); } if (!(e==Z_OK || e==Z_STREAM_END || e==Z_BUF_ERROR)) { Tcl_SetByteArrayLength(data, existing); ConvertError(zshPtr->interp, e); return TCL_ERROR; } if (e == Z_STREAM_END) { zshPtr->streamEnd = 1; if (zshPtr->currentInput) { Tcl_DecrRefCount(zshPtr->currentInput); zshPtr->currentInput = 0; } inflateEnd(&zshPtr->stream); } } else { Tcl_ListObjLength(NULL, zshPtr->outData, &listLen); if (count == -1) { count = 0; for (i=0; ioutData, i, &itemObj); itemPtr = Tcl_GetByteArrayFromObj(itemObj, &itemLen); if (i == 0) { count += itemLen - zshPtr->outPos; } else { count += itemLen; } } } /* * Prepare the place to store the data. */ dataPtr = Tcl_SetByteArrayLength(data, existing + count); dataPtr += existing; while ((count > dataPos) && (Tcl_ListObjLength(NULL, zshPtr->outData, &listLen) == TCL_OK) && (listLen > 0)) { /* * Get the next chunk off our list of chunks and grab the data out * of it. */ Tcl_ListObjIndex(NULL, zshPtr->outData, 0, &itemObj); itemPtr = Tcl_GetByteArrayFromObj(itemObj, &itemLen); if (itemLen-zshPtr->outPos >= count-dataPos) { unsigned len = count - dataPos; memcpy(dataPtr + dataPos, itemPtr + zshPtr->outPos, len); zshPtr->outPos += len; dataPos += len; if (zshPtr->outPos == itemLen) { zshPtr->outPos = 0; } } else { unsigned len = itemLen - zshPtr->outPos; memcpy(dataPtr + dataPos, itemPtr + zshPtr->outPos, len); dataPos += len; zshPtr->outPos = 0; } if (zshPtr->outPos == 0) { Tcl_ListObjReplace(NULL, zshPtr->outData, 0, 1, 0, NULL); listLen--; } } Tcl_SetByteArrayLength(data, existing + dataPos); } return TCL_OK; } /* *---------------------------------------------------------------------- * * Tcl_ZlibDeflate -- * * Compress the contents of Tcl_Obj *data with compression level in * output format, producing the compressed data in the interpreter * result. * *---------------------------------------------------------------------- */ int Tcl_ZlibDeflate( Tcl_Interp *interp, int format, Tcl_Obj *data, int level, Tcl_Obj *gzipHeaderDictObj) { int wbits = 0, inLen = 0, e = 0, extraSize = 0; Byte *inData = NULL; z_stream stream; GzipHeader header; gz_header *headerPtr = NULL; Tcl_Obj *obj; if (!interp) { return TCL_ERROR; } /* * Compressed format is specified by the wbits parameter. See zlib.h for * details. */ if (format == TCL_ZLIB_FORMAT_RAW) { wbits = WBITS_RAW; } else if (format == TCL_ZLIB_FORMAT_GZIP) { wbits = WBITS_GZIP; /* * Need to allocate extra space for the gzip header and footer. The * amount of space is (a bit less than) 32 bytes, plus a byte for each * byte of string that we add. Note that over-allocation is not a * problem. [Bug 2419061] */ extraSize = 32; if (gzipHeaderDictObj) { headerPtr = &header.header; memset(headerPtr, 0, sizeof(gz_header)); if (GenerateHeader(interp, gzipHeaderDictObj, &header, &extraSize) != TCL_OK) { return TCL_ERROR; } } } else if (format == TCL_ZLIB_FORMAT_ZLIB) { wbits = WBITS_ZLIB; } else { Tcl_Panic("incorrect zlib data format, must be TCL_ZLIB_FORMAT_ZLIB, " "TCL_ZLIB_FORMAT_GZIP or TCL_ZLIB_FORMAT_ZLIB"); } if (level < -1 || level > 9) { Tcl_Panic("compression level should be between 0 (uncompressed) and " "9 (best compression) or -1 for default compression level"); } /* * Allocate some space to store the output. */ TclNewObj(obj); /* * Obtain the pointer to the byte array, we'll pass this pointer straight * to the deflate command. */ inData = Tcl_GetByteArrayFromObj(data, &inLen); memset(&stream, 0, sizeof(z_stream)); stream.avail_in = (uInt) inLen; stream.next_in = inData; /* * No output buffer available yet, will alloc after deflateInit2. */ e = deflateInit2(&stream, level, Z_DEFLATED, wbits, MAX_MEM_LEVEL, Z_DEFAULT_STRATEGY); if (e != Z_OK) { goto error; } if (headerPtr != NULL) { e = deflateSetHeader(&stream, headerPtr); if (e != Z_OK) { goto error; } } /* * Allocate the output buffer from the value of deflateBound(). This is * probably too much space. Before returning to the caller, we will reduce * it back to the actual compressed size. */ stream.avail_out = deflateBound(&stream, inLen) + extraSize; stream.next_out = Tcl_SetByteArrayLength(obj, stream.avail_out); /* * Perform the compression, Z_FINISH means do it in one go. */ e = deflate(&stream, Z_FINISH); if (e != Z_STREAM_END) { e = deflateEnd(&stream); /* * deflateEnd() returns Z_OK when there are bytes left to compress, at * this point we consider that an error, although we could continue by * allocating more memory and calling deflate() again. */ if (e == Z_OK) { e = Z_BUF_ERROR; } } else { e = deflateEnd(&stream); } if (e != Z_OK) { goto error; } /* * Reduce the bytearray length to the actual data length produced by * deflate. */ Tcl_SetByteArrayLength(obj, stream.total_out); Tcl_SetObjResult(interp, obj); return TCL_OK; error: ConvertError(interp, e); TclDecrRefCount(obj); return TCL_ERROR; } /* *---------------------------------------------------------------------- * * Tcl_ZlibInflate -- * * Decompress data in an object into the interpreter result. * *---------------------------------------------------------------------- */ int Tcl_ZlibInflate( Tcl_Interp *interp, int format, Tcl_Obj *data, int bufferSize, Tcl_Obj *gzipHeaderDictObj) { int wbits = 0, inLen = 0, e = 0, newBufferSize; Byte *inData = NULL, *outData = NULL, *newOutData = NULL; z_stream stream; gz_header header, *headerPtr = NULL; Tcl_Obj *obj; char *nameBuf = NULL, *commentBuf = NULL; if (!interp) { return TCL_ERROR; } /* * Compressed format is specified by the wbits parameter. See zlib.h for * details. */ switch (format) { case TCL_ZLIB_FORMAT_RAW: wbits = WBITS_RAW; gzipHeaderDictObj = NULL; break; case TCL_ZLIB_FORMAT_ZLIB: wbits = WBITS_ZLIB; gzipHeaderDictObj = NULL; break; case TCL_ZLIB_FORMAT_GZIP: wbits = WBITS_GZIP; break; case TCL_ZLIB_FORMAT_AUTO: wbits = WBITS_AUTODETECT; break; default: Tcl_Panic("incorrect zlib data format, must be TCL_ZLIB_FORMAT_ZLIB, " "TCL_ZLIB_FORMAT_GZIP, TCL_ZLIB_FORMAT_RAW or " "TCL_ZLIB_FORMAT_AUTO"); } if (gzipHeaderDictObj) { headerPtr = &header; memset(headerPtr, 0, sizeof(gz_header)); nameBuf = ckalloc(MAXPATHLEN); header.name = (Bytef *) nameBuf; header.name_max = MAXPATHLEN - 1; commentBuf = ckalloc(MAX_COMMENT_LEN); header.comment = (Bytef *) commentBuf; header.comm_max = MAX_COMMENT_LEN - 1; } inData = Tcl_GetByteArrayFromObj(data, &inLen); if (bufferSize < 1) { /* * Start with a buffer (up to) 3 times the size of the input data. */ if (inLen < 32*1024*1024) { bufferSize = 3*inLen; } else if (inLen < 256*1024*1024) { bufferSize = 2*inLen; } else { bufferSize = inLen; } } TclNewObj(obj); outData = Tcl_SetByteArrayLength(obj, bufferSize); memset(&stream, 0, sizeof(z_stream)); stream.avail_in = (uInt) inLen+1; /* +1 because zlib can "over-request" * input (but ignore it!) */ stream.next_in = inData; stream.avail_out = bufferSize; stream.next_out = outData; /* * Initialize zlib for decompression. */ e = inflateInit2(&stream, wbits); if (e != Z_OK) { goto error; } if (headerPtr) { e = inflateGetHeader(&stream, headerPtr); if (e != Z_OK) { goto error; } } /* * Start the decompression cycle. */ while (1) { e = inflate(&stream, Z_FINISH); if (e != Z_BUF_ERROR) { break; } /* * Not enough room in the output buffer. Increase it by five times the * bytes still in the input buffer. (Because 3 times didn't do the * trick before, 5 times is what we do next.) Further optimization * should be done by the user, specify the decompressed size! */ if ((stream.avail_in == 0) && (stream.avail_out > 0)) { e = Z_STREAM_ERROR; goto error; } newBufferSize = bufferSize + 5 * stream.avail_in; if (newBufferSize == bufferSize) { newBufferSize = bufferSize+1000; } newOutData = Tcl_SetByteArrayLength(obj, newBufferSize); /* * Set next out to the same offset in the new location. */ stream.next_out = newOutData + stream.total_out; /* * And increase avail_out with the number of new bytes allocated. */ stream.avail_out += newBufferSize - bufferSize; outData = newOutData; bufferSize = newBufferSize; } if (e != Z_STREAM_END) { inflateEnd(&stream); goto error; } e = inflateEnd(&stream); if (e != Z_OK) { goto error; } /* * Reduce the BA length to the actual data length produced by deflate. */ Tcl_SetByteArrayLength(obj, stream.total_out); if (headerPtr != NULL) { ExtractHeader(&header, gzipHeaderDictObj); SetValue(gzipHeaderDictObj, "size", Tcl_NewLongObj((long) stream.total_out)); ckfree(nameBuf); ckfree(commentBuf); } Tcl_SetObjResult(interp, obj); return TCL_OK; error: TclDecrRefCount(obj); ConvertError(interp, e); if (nameBuf) { ckfree(nameBuf); } if (commentBuf) { ckfree(commentBuf); } return TCL_ERROR; } /* *---------------------------------------------------------------------- * * Tcl_ZlibCRC32, Tcl_ZlibAdler32 -- * * Access to the checksumming engines. * *---------------------------------------------------------------------- */ unsigned int Tcl_ZlibCRC32( unsigned int crc, const unsigned char *buf, int len) { /* Nothing much to do, just wrap the crc32(). */ return crc32(crc, (Bytef *) buf, (unsigned) len); } unsigned int Tcl_ZlibAdler32( unsigned int adler, const unsigned char *buf, int len) { return adler32(adler, (Bytef *) buf, (unsigned) len); } /* *---------------------------------------------------------------------- * * ZlibCmd -- * * Implementation of the [zlib] command. * *---------------------------------------------------------------------- */ static int ZlibCmd( ClientData notUsed, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { int command, dlen, i, option, level = -1; unsigned start, buffersize = 0; Byte *data; Tcl_Obj *headerDictObj; const char *extraInfoStr = NULL; static const char *const commands[] = { "adler32", "compress", "crc32", "decompress", "deflate", "gunzip", "gzip", "inflate", "push", "stream", NULL }; enum zlibCommands { CMD_ADLER, CMD_COMPRESS, CMD_CRC, CMD_DECOMPRESS, CMD_DEFLATE, CMD_GUNZIP, CMD_GZIP, CMD_INFLATE, CMD_PUSH, CMD_STREAM }; if (objc < 2) { Tcl_WrongNumArgs(interp, 1, objv, "command arg ?...?"); return TCL_ERROR; } if (Tcl_GetIndexFromObj(interp, objv[1], commands, "command", 0, &command) != TCL_OK) { return TCL_ERROR; } switch ((enum zlibCommands) command) { case CMD_ADLER: /* adler32 str ?startvalue? * -> checksum */ if (objc < 3 || objc > 4) { Tcl_WrongNumArgs(interp, 2, objv, "data ?startValue?"); return TCL_ERROR; } if (objc>3 && Tcl_GetIntFromObj(interp, objv[3], (int *) &start) != TCL_OK) { return TCL_ERROR; } if (objc < 4) { start = Tcl_ZlibAdler32(0, NULL, 0); } data = Tcl_GetByteArrayFromObj(objv[2], &dlen); Tcl_SetObjResult(interp, Tcl_NewWideIntObj((Tcl_WideInt) Tcl_ZlibAdler32(start, data, dlen))); return TCL_OK; case CMD_CRC: /* crc32 str ?startvalue? * -> checksum */ if (objc < 3 || objc > 4) { Tcl_WrongNumArgs(interp, 2, objv, "data ?startValue?"); return TCL_ERROR; } if (objc>3 && Tcl_GetIntFromObj(interp, objv[3], (int *) &start) != TCL_OK) { return TCL_ERROR; } if (objc < 4) { start = Tcl_ZlibCRC32(0, NULL, 0); } data = Tcl_GetByteArrayFromObj(objv[2], &dlen); Tcl_SetObjResult(interp, Tcl_NewWideIntObj((Tcl_WideInt) Tcl_ZlibCRC32(start, data, dlen))); return TCL_OK; case CMD_DEFLATE: /* deflate data ?level? * -> rawCompressedData */ if (objc < 3 || objc > 4) { Tcl_WrongNumArgs(interp, 2, objv, "data ?level?"); return TCL_ERROR; } if (objc > 3) { if (Tcl_GetIntFromObj(interp, objv[3], &level) != TCL_OK) { return TCL_ERROR; } if (level < 0 || level > 9) { goto badLevel; } } return Tcl_ZlibDeflate(interp, TCL_ZLIB_FORMAT_RAW, objv[2], level, NULL); case CMD_COMPRESS: /* compress data ?level? * -> zlibCompressedData */ if (objc < 3 || objc > 4) { Tcl_WrongNumArgs(interp, 2, objv, "data ?level?"); return TCL_ERROR; } if (objc > 3) { if (Tcl_GetIntFromObj(interp, objv[3], &level) != TCL_OK) { return TCL_ERROR; } if (level < 0 || level > 9) { goto badLevel; } } return Tcl_ZlibDeflate(interp, TCL_ZLIB_FORMAT_ZLIB, objv[2], level, NULL); case CMD_GZIP: /* gzip data ?level? * -> gzippedCompressedData */ if (objc < 3 || objc > 7 || ((objc & 1) == 0)) { Tcl_WrongNumArgs(interp, 2, objv, "data ?-level level? ?-header header?"); return TCL_ERROR; } headerDictObj = NULL; for (i=3 ; i 9) { extraInfoStr = "\n (in -level option)"; goto badLevel; } break; } } return Tcl_ZlibDeflate(interp, TCL_ZLIB_FORMAT_GZIP, objv[2], level, headerDictObj); case CMD_INFLATE: /* inflate rawcomprdata ?bufferSize? * -> decompressedData */ if (objc < 3 || objc > 4) { Tcl_WrongNumArgs(interp, 2, objv, "data ?bufferSize?"); return TCL_ERROR; } if (objc > 3) { if (Tcl_GetIntFromObj(interp, objv[3], (int *) &buffersize) != TCL_OK) { return TCL_ERROR; } if (buffersize < 16 || buffersize > 65536) { goto badBuffer; } } return Tcl_ZlibInflate(interp, TCL_ZLIB_FORMAT_RAW, objv[2], buffersize, NULL); case CMD_DECOMPRESS: /* decompress zlibcomprdata \ * ?bufferSize? * -> decompressedData */ if (objc < 3 || objc > 4) { Tcl_WrongNumArgs(interp, 2, objv, "data ?bufferSize?"); return TCL_ERROR; } if (objc > 3) { if (Tcl_GetIntFromObj(interp, objv[3], (int *) &buffersize) != TCL_OK) { return TCL_ERROR; } if (buffersize < 16 || buffersize > 65536) { goto badBuffer; } } return Tcl_ZlibInflate(interp, TCL_ZLIB_FORMAT_ZLIB, objv[2], buffersize, NULL); case CMD_GUNZIP: { /* gunzip gzippeddata ?bufferSize? * -> decompressedData */ Tcl_Obj *headerVarObj; if (objc < 3 || objc > 5 || ((objc & 1) == 0)) { Tcl_WrongNumArgs(interp, 2, objv, "data ?-headerVar varName?"); return TCL_ERROR; } headerDictObj = headerVarObj = NULL; for (i=3 ; i 65536) { goto badBuffer; } break; case 1: headerVarObj = objv[i+1]; headerDictObj = Tcl_NewObj(); break; } } if (Tcl_ZlibInflate(interp, TCL_ZLIB_FORMAT_GZIP, objv[2], buffersize, headerDictObj) != TCL_OK) { if (headerDictObj) { TclDecrRefCount(headerDictObj); } return TCL_ERROR; } if (headerVarObj != NULL && Tcl_ObjSetVar2(interp, headerVarObj, NULL, headerDictObj, TCL_LEAVE_ERR_MSG) == NULL) { if (headerDictObj) { TclDecrRefCount(headerDictObj); } return TCL_ERROR; } return TCL_OK; } case CMD_STREAM: /* stream deflate/inflate/...gunzip \ * ?options...? * -> handleCmd */ return ZlibStreamSubcmd(interp, objc, objv); case CMD_PUSH: /* push mode channel options... * -> channel */ return ZlibPushSubcmd(interp, objc, objv); }; return TCL_ERROR; badLevel: Tcl_AppendResult(interp, "level must be 0 to 9", NULL); Tcl_SetErrorCode(interp, "TCL", "VALUE", "COMPRESSIONLEVEL", NULL); if (extraInfoStr) { Tcl_AddErrorInfo(interp, extraInfoStr); } return TCL_ERROR; badBuffer: Tcl_AppendResult(interp, "buffer size must be 32 to 65536", NULL); Tcl_SetErrorCode(interp, "TCL", "VALUE", "BUFFERSIZE", NULL); return TCL_ERROR; } /* *---------------------------------------------------------------------- * * ZlibStreamSubcmd -- * * Implementation of the [zlib stream] subcommand. * *---------------------------------------------------------------------- */ static int ZlibStreamSubcmd( Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { static const char *const stream_formats[] = { "compress", "decompress", "deflate", "gunzip", "gzip", "inflate", NULL }; enum zlibFormats { FMT_COMPRESS, FMT_DECOMPRESS, FMT_DEFLATE, FMT_GUNZIP, FMT_GZIP, FMT_INFLATE }; int i, format, mode, option, level; typedef struct { const char *name; Tcl_Obj **valueVar; } OptDescriptor; Tcl_Obj *compDictObj = NULL; Tcl_Obj *gzipHeaderObj = NULL; Tcl_Obj *levelObj = NULL; const OptDescriptor compressionOpts[] = { { "-dictionary", &compDictObj }, { "-level", &levelObj }, { NULL, NULL } }; const OptDescriptor gzipOpts[] = { { "-header", &gzipHeaderObj }, { "-level", &levelObj }, { NULL, NULL } }; const OptDescriptor expansionOpts[] = { { "-dictionary", &compDictObj }, { NULL, NULL } }; const OptDescriptor gunzipOpts[] = { { NULL, NULL } }; const OptDescriptor *desc; Tcl_ZlibStream zh; if (objc < 3 || !(objc & 1)) { Tcl_WrongNumArgs(interp, 2, objv, "mode ?-option value...?"); return TCL_ERROR; } if (Tcl_GetIndexFromObj(interp, objv[2], stream_formats, "mode", 0, &format) != TCL_OK) { return TCL_ERROR; } /* * The format determines the compression mode and the options that may be * specified. */ switch ((enum zlibFormats) format) { case FMT_DEFLATE: desc = compressionOpts; mode = TCL_ZLIB_STREAM_DEFLATE; format = TCL_ZLIB_FORMAT_RAW; break; case FMT_INFLATE: desc = expansionOpts; mode = TCL_ZLIB_STREAM_INFLATE; format = TCL_ZLIB_FORMAT_RAW; break; case FMT_COMPRESS: desc = compressionOpts; mode = TCL_ZLIB_STREAM_DEFLATE; format = TCL_ZLIB_FORMAT_ZLIB; break; case FMT_DECOMPRESS: desc = expansionOpts; mode = TCL_ZLIB_STREAM_INFLATE; format = TCL_ZLIB_FORMAT_ZLIB; break; case FMT_GZIP: desc = gzipOpts; mode = TCL_ZLIB_STREAM_DEFLATE; format = TCL_ZLIB_FORMAT_GZIP; break; case FMT_GUNZIP: desc = gunzipOpts; mode = TCL_ZLIB_STREAM_INFLATE; format = TCL_ZLIB_FORMAT_GZIP; break; default: Tcl_AppendResult(interp, "IMPOSSIBLE", NULL); return TCL_ERROR; } /* * Parse the options. */ for (i=3 ; i 9) { Tcl_AppendResult(interp, "level must be 0 to 9", NULL); Tcl_SetErrorCode(interp, "TCL", "VALUE", "COMPRESSIONLEVEL", NULL); Tcl_AddErrorInfo(interp, "\n (in -level option)"); return TCL_ERROR; } /* * Construct the stream now we know its configuration. */ if (Tcl_ZlibStreamInit(interp, mode, format, level, gzipHeaderObj, &zh) != TCL_OK) { return TCL_ERROR; } if (compDictObj != NULL) { ZlibStreamHandle *zshPtr = (ZlibStreamHandle *) zh; zshPtr->compDictObj = compDictObj; Tcl_IncrRefCount(compDictObj); } Tcl_SetObjResult(interp, Tcl_ZlibStreamGetCommandName(zh)); return TCL_OK; } /* *---------------------------------------------------------------------- * * ZlibPushSubcmd -- * * Implementation of the [zlib push] subcommand. * *---------------------------------------------------------------------- */ static int ZlibPushSubcmd( Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { static const char *const stream_formats[] = { "compress", "decompress", "deflate", "gunzip", "gzip", "inflate", NULL }; enum zlibFormats { FMT_COMPRESS, FMT_DECOMPRESS, FMT_DEFLATE, FMT_GUNZIP, FMT_GZIP, FMT_INFLATE }; Tcl_Channel chan; int chanMode, format, mode, level, i, option; static const char *const pushOptions[] = { "-dictionary", "-header", "-level", "-limit", NULL }; enum pushOptions {poDictionary, poHeader, poLevel, poLimit}; Tcl_Obj *headerObj = NULL, *compDictObj = NULL; int limit = 1, dummy; if (objc < 4) { Tcl_WrongNumArgs(interp, 2, objv, "mode channel ?options...?"); return TCL_ERROR; } if (Tcl_GetIndexFromObj(interp, objv[2], stream_formats, "mode", 0, &format) != TCL_OK) { return TCL_ERROR; } switch ((enum zlibFormats) format) { case FMT_DEFLATE: mode = TCL_ZLIB_STREAM_DEFLATE; format = TCL_ZLIB_FORMAT_RAW; break; case FMT_INFLATE: mode = TCL_ZLIB_STREAM_INFLATE; format = TCL_ZLIB_FORMAT_RAW; break; case FMT_COMPRESS: mode = TCL_ZLIB_STREAM_DEFLATE; format = TCL_ZLIB_FORMAT_ZLIB; break; case FMT_DECOMPRESS: mode = TCL_ZLIB_STREAM_INFLATE; format = TCL_ZLIB_FORMAT_ZLIB; break; case FMT_GZIP: mode = TCL_ZLIB_STREAM_DEFLATE; format = TCL_ZLIB_FORMAT_GZIP; break; case FMT_GUNZIP: mode = TCL_ZLIB_STREAM_INFLATE; format = TCL_ZLIB_FORMAT_GZIP; break; default: Tcl_AppendResult(interp, "IMPOSSIBLE", NULL); return TCL_ERROR; } if (TclGetChannelFromObj(interp, objv[3], &chan, &chanMode, 0) != TCL_OK){ return TCL_ERROR; } /* * Sanity checks. */ if (mode == TCL_ZLIB_STREAM_DEFLATE && !(chanMode & TCL_WRITABLE)) { Tcl_AppendResult(interp, "compression may only be applied to writable channels", NULL); Tcl_SetErrorCode(interp, "TCL", "ZIP", "UNWRITABLE", NULL); return TCL_ERROR; } if (mode == TCL_ZLIB_STREAM_INFLATE && !(chanMode & TCL_READABLE)) { Tcl_AppendResult(interp, "decompression may only be applied to readable channels", NULL); Tcl_SetErrorCode(interp, "TCL", "ZIP", "UNREADABLE", NULL); return TCL_ERROR; } /* * Parse options. */ level = Z_DEFAULT_COMPRESSION; for (i=4 ; i objc-1) { Tcl_AppendResult(interp, "value missing for -header option", NULL); Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL); return TCL_ERROR; } headerObj = objv[i]; if (Tcl_DictObjSize(interp, headerObj, &dummy) != TCL_OK) { Tcl_AddErrorInfo(interp, "\n (in -header option)"); return TCL_ERROR; } break; case poLevel: if (++i > objc-1) { Tcl_AppendResult(interp, "value missing for -level option", NULL); Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL); return TCL_ERROR; } if (Tcl_GetIntFromObj(interp, objv[i], (int*) &level) != TCL_OK) { Tcl_AddErrorInfo(interp, "\n (in -level option)"); return TCL_ERROR; } if (level < 0 || level > 9) { Tcl_AppendResult(interp, "level must be 0 to 9", NULL); Tcl_SetErrorCode(interp, "TCL", "VALUE", "COMPRESSIONLEVEL", NULL); Tcl_AddErrorInfo(interp, "\n (in -level option)"); return TCL_ERROR; } break; case poLimit: if (++i > objc-1) { Tcl_AppendResult(interp, "value missing for -limit option", NULL); Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL); return TCL_ERROR; } if (Tcl_GetIntFromObj(interp, objv[i], (int*) &limit) != TCL_OK) { Tcl_AddErrorInfo(interp, "\n (in -limit option)"); return TCL_ERROR; } if (limit < 1) { limit = 1; } break; case poDictionary: if (++i > objc-1) { Tcl_AppendResult(interp, "value missing for -dictionary option", NULL); Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL); return TCL_ERROR; } if (format == TCL_ZLIB_FORMAT_GZIP) { Tcl_AppendResult(interp, "a compression dictionary may not " "be set in the gzip format", NULL); Tcl_SetErrorCode(interp, "TCL", "ZIP", "BADOPT", NULL); return TCL_ERROR; } compDictObj = objv[i]; break; } } if (ZlibStackChannelTransform(interp, mode, format, level, chan, headerObj, compDictObj) == NULL) { return TCL_ERROR; } Tcl_SetObjResult(interp, objv[3]); return TCL_OK; } /* *---------------------------------------------------------------------- * * ZlibStreamCmd -- * * Implementation of the commands returned by [zlib stream]. * *---------------------------------------------------------------------- */ static int ZlibStreamCmd( ClientData cd, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { Tcl_ZlibStream zstream = cd; int command, index, count, code, buffersize = -1, flush = -1, i; Tcl_Obj *obj; static const char *const cmds[] = { "add", "checksum", "close", "eof", "finalize", "flush", "fullflush", "get", "header", "put", "reset", NULL }; enum zlibStreamCommands { zs_add, zs_checksum, zs_close, zs_eof, zs_finalize, zs_flush, zs_fullflush, zs_get, zs_header, zs_put, zs_reset }; static const char *const add_options[] = { "-buffer", "-finalize", "-flush", "-fullflush", NULL }; enum addOptions { ao_buffer, ao_finalize, ao_flush, ao_fullflush }; if (objc < 2) { Tcl_WrongNumArgs(interp, 1, objv, "option data ?...?"); return TCL_ERROR; } if (Tcl_GetIndexFromObj(interp, objv[1], cmds, "option", 0, &command) != TCL_OK) { return TCL_ERROR; } switch ((enum zlibStreamCommands) command) { case zs_add: /* $strm add ?$flushopt? $data */ for (i=2; i -1) { flush = -2; } else { flush = Z_SYNC_FLUSH; } break; case ao_fullflush: /* -fullflush */ if (flush > -1) { flush = -2; } else { flush = Z_FULL_FLUSH; } break; case ao_finalize: /* -finalize */ if (flush > -1) { flush = -2; } else { flush = Z_FINISH; } break; case ao_buffer: /* -buffer */ if (i == objc-2) { Tcl_AppendResult(interp, "\"-buffer\" option must be " "followed by integer decompression buffersize", NULL); Tcl_SetErrorCode(interp, "TCL", "ZIP", "NOVAL", NULL); return TCL_ERROR; } if (Tcl_GetIntFromObj(interp, objv[i+1], &buffersize) != TCL_OK) { return TCL_ERROR; } if (buffersize < 1 || buffersize > 65536) { Tcl_AppendResult(interp, "buffer size must be 32 to 65536", NULL); Tcl_SetErrorCode(interp, "TCL", "VALUE", "BUFFERSIZE", NULL); return TCL_ERROR; } } if (flush == -2) { Tcl_AppendResult(interp, "\"-flush\", \"-fullflush\" and " "\"-finalize\" options are mutually exclusive", NULL); Tcl_SetErrorCode(interp, "TCL", "ZIP", "EXCLUSIVE", NULL); return TCL_ERROR; } } if (flush == -1) { flush = 0; } if (Tcl_ZlibStreamPut(zstream, objv[objc-1], flush) != TCL_OK) { return TCL_ERROR; } TclNewObj(obj); code = Tcl_ZlibStreamGet(zstream, obj, buffersize); if (code == TCL_OK) { Tcl_SetObjResult(interp, obj); } else { TclDecrRefCount(obj); } return code; case zs_put: /* $strm put ?$flushopt? $data */ for (i=2; i -1) { flush = -2; } else { flush = Z_SYNC_FLUSH; } break; case ao_fullflush: /* -fullflush */ if (flush > -1) { flush = -2; } else { flush = Z_FULL_FLUSH; } break; case ao_finalize: /* -finalize */ if (flush > -1) { flush = -2; } else { flush = Z_FINISH; } break; case ao_buffer: Tcl_AppendResult(interp, "\"-buffer\" option not supported here", NULL); Tcl_SetErrorCode(interp, "TCL", "ZIP", "BADOPT", NULL); return TCL_ERROR; } if (flush == -2) { Tcl_AppendResult(interp, "\"-flush\", \"-fullflush\" and " "\"-finalize\" options are mutually exclusive", NULL); Tcl_SetErrorCode(interp, "TCL", "ZIP", "EXCLUSIVE", NULL); return TCL_ERROR; } } if (flush == -1) { flush = 0; } return Tcl_ZlibStreamPut(zstream, objv[objc-1], flush); case zs_get: /* $strm get ?count? */ if (objc > 3) { Tcl_WrongNumArgs(interp, 2, objv, "?count?"); return TCL_ERROR; } count = -1; if (objc >= 3) { if (Tcl_GetIntFromObj(interp, objv[2], &count) != TCL_OK) { return TCL_ERROR; } } TclNewObj(obj); code = Tcl_ZlibStreamGet(zstream, obj, count); if (code == TCL_OK) { Tcl_SetObjResult(interp, obj); } else { TclDecrRefCount(obj); } return code; case zs_flush: /* $strm flush */ if (objc != 2) { Tcl_WrongNumArgs(interp, 2, objv, NULL); return TCL_ERROR; } TclNewObj(obj); Tcl_IncrRefCount(obj); code = Tcl_ZlibStreamPut(zstream, obj, Z_SYNC_FLUSH); TclDecrRefCount(obj); return code; case zs_fullflush: /* $strm fullflush */ if (objc != 2) { Tcl_WrongNumArgs(interp, 2, objv, NULL); return TCL_ERROR; } TclNewObj(obj); Tcl_IncrRefCount(obj); code = Tcl_ZlibStreamPut(zstream, obj, Z_FULL_FLUSH); TclDecrRefCount(obj); return code; case zs_finalize: /* $strm finalize */ if (objc != 2) { Tcl_WrongNumArgs(interp, 2, objv, NULL); return TCL_ERROR; } /* * The flush commands slightly abuse the empty result obj as input * data. */ TclNewObj(obj); Tcl_IncrRefCount(obj); code = Tcl_ZlibStreamPut(zstream, obj, Z_FINISH); TclDecrRefCount(obj); return code; case zs_close: /* $strm close */ if (objc != 2) { Tcl_WrongNumArgs(interp, 2, objv, NULL); return TCL_ERROR; } return Tcl_ZlibStreamClose(zstream); case zs_eof: /* $strm eof */ if (objc != 2) { Tcl_WrongNumArgs(interp, 2, objv, NULL); return TCL_ERROR; } Tcl_SetObjResult(interp, Tcl_NewIntObj(Tcl_ZlibStreamEof(zstream))); return TCL_OK; case zs_checksum: /* $strm checksum */ if (objc != 2) { Tcl_WrongNumArgs(interp, 2, objv, NULL); return TCL_ERROR; } Tcl_SetObjResult(interp, Tcl_NewWideIntObj((Tcl_WideInt) Tcl_ZlibStreamChecksum(zstream))); return TCL_OK; case zs_reset: /* $strm reset */ if (objc != 2) { Tcl_WrongNumArgs(interp, 2, objv, NULL); return TCL_ERROR; } return Tcl_ZlibStreamReset(zstream); case zs_header: { /* $strm header */ ZlibStreamHandle *zshPtr = (ZlibStreamHandle *) zstream; Tcl_Obj *resultObj; if (objc != 2) { Tcl_WrongNumArgs(interp, 2, objv, NULL); return TCL_ERROR; } else if (zshPtr->mode != TCL_ZLIB_STREAM_INFLATE || zshPtr->format != TCL_ZLIB_FORMAT_GZIP) { Tcl_AppendResult(interp, "only gunzip streams can produce header information", NULL); Tcl_SetErrorCode(interp, "TCL", "ZIP", "BADOP", NULL); return TCL_ERROR; } TclNewObj(resultObj); ExtractHeader(&zshPtr->gzHeaderPtr->header, resultObj); Tcl_SetObjResult(interp, resultObj); return TCL_OK; } } return TCL_OK; } /* *---------------------------------------------------------------------- * Set of functions to support channel stacking. *---------------------------------------------------------------------- */ static int ZlibTransformClose( ClientData instanceData, Tcl_Interp *interp) { ZlibChannelData *cd = instanceData; int e, result = TCL_OK; /* * Delete the support timer. */ ZlibTransformTimerKill(cd); /* * Flush any data waiting to be compressed. */ if (cd->mode == TCL_ZLIB_STREAM_DEFLATE) { cd->outStream.avail_in = 0; do { cd->outStream.next_out = (Bytef *) cd->outBuffer; cd->outStream.avail_out = (unsigned) cd->outAllocated; e = deflate(&cd->outStream, Z_FINISH); if (e != Z_OK && e != Z_STREAM_END) { /* TODO: is this the right way to do errors on close? */ if (!TclInThreadExit()) { ConvertError(interp, e); } result = TCL_ERROR; break; } if (cd->outStream.avail_out != (unsigned) cd->outAllocated) { if (Tcl_WriteRaw(cd->parent, cd->outBuffer, cd->outAllocated - cd->outStream.avail_out) < 0) { /* TODO: is this the right way to do errors on close? * Note: when close is called from FinalizeIOSubsystem * then interp may be NULL */ if (!TclInThreadExit() && interp) { Tcl_AppendResult(interp, "error while finalizing file: ", Tcl_PosixError(interp), NULL); } result = TCL_ERROR; break; } } } while (e != Z_STREAM_END); e = deflateEnd(&cd->outStream); } else { e = inflateEnd(&cd->inStream); } /* * Release all memory. */ if (cd->inBuffer) { ckfree(cd->inBuffer); cd->inBuffer = NULL; } if (cd->outBuffer) { ckfree(cd->outBuffer); cd->outBuffer = NULL; } ckfree(cd); return result; } static int ZlibTransformInput( ClientData instanceData, char *buf, int toRead, int *errorCodePtr) { ZlibChannelData *cd = instanceData; Tcl_DriverInputProc *inProc = Tcl_ChannelInputProc(Tcl_GetChannelType(cd->parent)); int e, readBytes, flush = Z_NO_FLUSH; if (cd->mode == TCL_ZLIB_STREAM_DEFLATE) { return inProc(Tcl_GetChannelInstanceData(cd->parent), buf, toRead, errorCodePtr); } cd->inStream.next_out = (Bytef *) buf; cd->inStream.avail_out = toRead; if (cd->inStream.next_in == NULL) { goto doReadFirst; } while (1) { e = inflate(&cd->inStream, flush); if (e == Z_NEED_DICT && cd->compDictObj) { e = SetInflateDictionary(&cd->inStream, cd->compDictObj); if (e == Z_OK) { continue; } } if ((e == Z_STREAM_END) || (e==Z_OK && cd->inStream.avail_out==0)) { return toRead - cd->inStream.avail_out; } /* * Z_BUF_ERROR can be ignored as per http://www.zlib.net/zlib_how.html * * Just indicates that the zlib couldn't consume input/produce output, * and is fixed by supplying more input. */ if ((e != Z_OK) && (e != Z_BUF_ERROR)) { Tcl_Obj *errObj = Tcl_NewListObj(0, NULL); Tcl_ListObjAppendElement(NULL, errObj, Tcl_NewStringObj(cd->inStream.msg, -1)); Tcl_SetChannelError(cd->parent, errObj); *errorCodePtr = EINVAL; return -1; } /* * Check if the inflate stopped early. */ if (cd->inStream.avail_in > 0) { continue; } /* * Emptied the buffer of data from the underlying channel. Get some * more. */ doReadFirst: /* * Hack for Bug 2762041. Disable pre-reading of lots of input, read * only one character. This way the Z_END_OF_STREAM can be read * without triggering an EOF in the base channel. The higher input * loops in DoReadChars() would react to that by stopping, despite the * transform still having data which could be read. * * This is only a hack because other transforms may not be able to * work around the general problem in this way. */ readBytes = Tcl_ReadRaw(cd->parent, cd->inBuffer, 1); if (readBytes < 0) { *errorCodePtr = Tcl_GetErrno(); return -1; } else if (readBytes == 0) { flush = Z_SYNC_FLUSH; } cd->inStream.next_in = (Bytef *) cd->inBuffer; cd->inStream.avail_in = readBytes; } } static int ZlibTransformOutput( ClientData instanceData, const char *buf, int toWrite, int *errorCodePtr) { ZlibChannelData *cd = instanceData; Tcl_DriverOutputProc *outProc = Tcl_ChannelOutputProc(Tcl_GetChannelType(cd->parent)); int e, produced; if (cd->mode == TCL_ZLIB_STREAM_INFLATE) { return outProc(Tcl_GetChannelInstanceData(cd->parent), buf, toWrite, errorCodePtr); } cd->outStream.next_in = (Bytef *) buf; cd->outStream.avail_in = toWrite; do { cd->outStream.next_out = (Bytef *) cd->outBuffer; cd->outStream.avail_out = cd->outAllocated; e = deflate(&cd->outStream, Z_NO_FLUSH); produced = cd->outAllocated - cd->outStream.avail_out; if (e == Z_OK && cd->outStream.avail_out > 0) { if (Tcl_WriteRaw(cd->parent, cd->outBuffer, produced) < 0) { *errorCodePtr = Tcl_GetErrno(); return -1; } } } while (e == Z_OK && produced > 0 && cd->outStream.avail_in > 0); if (e != Z_OK) { Tcl_SetChannelError(cd->parent, Tcl_NewStringObj(cd->outStream.msg, -1)); *errorCodePtr = EINVAL; return -1; } return toWrite - cd->outStream.avail_in; } static int ZlibTransformSetOption( /* not used */ ClientData instanceData, Tcl_Interp *interp, const char *optionName, const char *value) { ZlibChannelData *cd = instanceData; Tcl_DriverSetOptionProc *setOptionProc = Tcl_ChannelSetOptionProc(Tcl_GetChannelType(cd->parent)); static const char *chanOptions = "dictionary flush"; static const char *gzipChanOptions = "flush"; int haveFlushOpt = (cd->mode == TCL_ZLIB_STREAM_DEFLATE); if (optionName && (strcmp(optionName, "-dictionary") == 0) && (cd->format != TCL_ZLIB_FORMAT_GZIP)) { Tcl_Obj *compDictObj; int code; TclNewStringObj(compDictObj, value, strlen(value)); Tcl_IncrRefCount(compDictObj); (void) Tcl_GetByteArrayFromObj(compDictObj, NULL); if (cd->compDictObj) { TclDecrRefCount(cd->compDictObj); } cd->compDictObj = compDictObj; if (cd->mode == TCL_ZLIB_STREAM_DEFLATE) { code = SetDeflateDictionary(&cd->outStream, compDictObj); if (code != Z_OK) { ConvertError(interp, code); return TCL_ERROR; } } return TCL_OK; } if (haveFlushOpt && optionName && strcmp(optionName, "-flush") == 0) { int flushType; if (value[0] == 'f' && strcmp(value, "full") == 0) { flushType = Z_FULL_FLUSH; } else if (value[0] == 's' && strcmp(value, "sync") == 0) { flushType = Z_SYNC_FLUSH; } else { Tcl_AppendResult(interp, "unknown -flush type \"", value, "\": must be full or sync", NULL); Tcl_SetErrorCode(interp, "TCL", "VALUE", "FLUSH", NULL); return TCL_ERROR; } /* * Try to actually do the flush now. */ cd->outStream.avail_in = 0; while (1) { int e; cd->outStream.next_out = (Bytef *) cd->outBuffer; cd->outStream.avail_out = cd->outAllocated; e = deflate(&cd->outStream, flushType); if (e == Z_BUF_ERROR) { break; } else if (e != Z_OK) { ConvertError(interp, e); return TCL_ERROR; } else if (cd->outStream.avail_out == 0) { break; } if (Tcl_WriteRaw(cd->parent, cd->outBuffer, cd->outStream.next_out - (Bytef*)cd->outBuffer) < 0) { Tcl_AppendResult(interp, "problem flushing channel: ", Tcl_PosixError(interp), NULL); return TCL_ERROR; } } return TCL_OK; } if (setOptionProc == NULL) { if (cd->format == TCL_ZLIB_FORMAT_GZIP) { return Tcl_BadChannelOption(interp, optionName, gzipChanOptions); } else { return Tcl_BadChannelOption(interp, optionName, chanOptions); } } return setOptionProc(Tcl_GetChannelInstanceData(cd->parent), interp, optionName, value); } static int ZlibTransformGetOption( ClientData instanceData, Tcl_Interp *interp, const char *optionName, Tcl_DString *dsPtr) { ZlibChannelData *cd = instanceData; Tcl_DriverGetOptionProc *getOptionProc = Tcl_ChannelGetOptionProc(Tcl_GetChannelType(cd->parent)); static const char *chanOptions = "checksum dictionary header"; /* * The "crc" option reports the current CRC (calculated with the Adler32 * or CRC32 algorithm according to the format) given the data that has * been processed so far. */ if (optionName == NULL || strcmp(optionName, "-checksum") == 0) { uLong crc; char buf[12]; if (cd->mode == TCL_ZLIB_STREAM_DEFLATE) { crc = cd->outStream.adler; } else { crc = cd->inStream.adler; } sprintf(buf, "%lu", crc); if (optionName == NULL) { Tcl_DStringAppendElement(dsPtr, "-checksum"); Tcl_DStringAppendElement(dsPtr, buf); } else { Tcl_DStringAppend(dsPtr, buf, -1); return TCL_OK; } } if ((cd->format != TCL_ZLIB_FORMAT_GZIP) && (optionName == NULL || strcmp(optionName, "-dictionary") == 0)) { /* * Embedded NUL bytes are ok; they'll be C080-encoded. */ if (optionName == NULL) { Tcl_DStringAppendElement(dsPtr, "-dictionary"); if (cd->compDictObj) { Tcl_DStringAppendElement(dsPtr, Tcl_GetString(cd->compDictObj)); } else { Tcl_DStringAppendElement(dsPtr, ""); } } else { int len; const char *str = Tcl_GetStringFromObj(cd->compDictObj, &len); Tcl_DStringAppend(dsPtr, str, len); } } /* * The "header" option, which is only valid on inflating gzip channels, * reports the header that has been read from the start of the stream. */ if ((cd->flags & IN_HEADER) && ((optionName == NULL) || (strcmp(optionName, "-header") == 0))) { Tcl_Obj *tmpObj = Tcl_NewObj(); ExtractHeader(&cd->inHeader.header, tmpObj); if (optionName == NULL) { Tcl_DStringAppendElement(dsPtr, "-header"); Tcl_DStringAppendElement(dsPtr, Tcl_GetString(tmpObj)); Tcl_DecrRefCount(tmpObj); } else { int len; const char *str = Tcl_GetStringFromObj(tmpObj, &len); Tcl_DStringAppend(dsPtr, str, len); Tcl_DecrRefCount(tmpObj); return TCL_OK; } } /* * Now we do the standard processing of the stream we wrapped. */ if (getOptionProc) { return getOptionProc(Tcl_GetChannelInstanceData(cd->parent), interp, optionName, dsPtr); } if (optionName == NULL) { return TCL_OK; } return Tcl_BadChannelOption(interp, optionName, chanOptions); } static void ZlibTransformWatch( ClientData instanceData, int mask) { ZlibChannelData *cd = instanceData; Tcl_DriverWatchProc *watchProc; /* * This code is based on the code in tclIORTrans.c */ watchProc = Tcl_ChannelWatchProc(Tcl_GetChannelType(cd->parent)); watchProc(Tcl_GetChannelInstanceData(cd->parent), mask); if (!(mask & TCL_READABLE) || (cd->inStream.avail_in == (uInt) cd->inAllocated)) { ZlibTransformTimerKill(cd); } else { ZlibTransformTimerSetup(cd); } } static int ZlibTransformGetHandle( ClientData instanceData, int direction, ClientData *handlePtr) { ZlibChannelData *cd = instanceData; return Tcl_GetChannelHandle(cd->parent, direction, handlePtr); } static int ZlibTransformBlockMode( ClientData instanceData, int mode) { ZlibChannelData *cd = instanceData; if (mode == TCL_MODE_NONBLOCKING) { cd->flags |= ASYNC; } else { cd->flags &= ~ASYNC; } return TCL_OK; } static int ZlibTransformHandler( ClientData instanceData, int interestMask) { ZlibChannelData *cd = instanceData; ZlibTransformTimerKill(cd); return interestMask; } static void ZlibTransformTimerSetup( ZlibChannelData *cd) { if (cd->timer == NULL) { cd->timer = Tcl_CreateTimerHandler(TRANSFORM_FLUSH_DELAY, ZlibTransformTimerRun, cd); } } static void ZlibTransformTimerKill( ZlibChannelData *cd) { if (cd->timer != NULL) { Tcl_DeleteTimerHandler(cd->timer); cd->timer = NULL; } } static void ZlibTransformTimerRun( ClientData clientData) { ZlibChannelData *cd = clientData; cd->timer = NULL; Tcl_NotifyChannel(cd->chan, TCL_READABLE); } /* *---------------------------------------------------------------------- * * ZlibStackChannelTransform -- * * Stacks either compression or decompression onto a channel. * * Results: * The stacked channel, or NULL if there was an error. * *---------------------------------------------------------------------- */ static Tcl_Channel ZlibStackChannelTransform( Tcl_Interp *interp, /* Where to write error messages. */ int mode, /* Whether this is a compressing transform * (TCL_ZLIB_STREAM_DEFLATE) or a * decompressing transform * (TCL_ZLIB_STREAM_INFLATE). Note that * compressing transforms require that the * channel is writable, and decompressing * transforms require that the channel is * readable. */ int format, /* One of the TCL_ZLIB_FORMAT_* values that * indicates what compressed format to allow. * TCL_ZLIB_FORMAT_AUTO is only supported for * decompressing transforms. */ int level, /* What compression level to use. Ignored for * decompressing transforms. */ Tcl_Channel channel, /* The channel to attach to. */ Tcl_Obj *gzipHeaderDictPtr, /* A description of header to use, or NULL to * use a default. Ignored if not compressing * to produce gzip-format data. */ Tcl_Obj *compDictObj) /* Byte-array object containing compression * dictionary (not dictObj!) to use if * necessary. */ { ZlibChannelData *cd = ckalloc(sizeof(ZlibChannelData)); Tcl_Channel chan; int wbits = 0; int e; if (mode != TCL_ZLIB_STREAM_DEFLATE && mode != TCL_ZLIB_STREAM_INFLATE) { Tcl_Panic("unknown mode: %d", mode); } memset(cd, 0, sizeof(ZlibChannelData)); cd->mode = mode; cd->format = format; if (format == TCL_ZLIB_FORMAT_GZIP || format == TCL_ZLIB_FORMAT_AUTO) { if (mode == TCL_ZLIB_STREAM_DEFLATE) { if (gzipHeaderDictPtr) { cd->flags |= OUT_HEADER; if (GenerateHeader(interp, gzipHeaderDictPtr, &cd->outHeader, NULL) != TCL_OK) { goto error; } } } else { cd->flags |= IN_HEADER; cd->inHeader.header.name = (Bytef *) &cd->inHeader.nativeFilenameBuf; cd->inHeader.header.name_max = MAXPATHLEN - 1; cd->inHeader.header.comment = (Bytef *) &cd->inHeader.nativeCommentBuf; cd->inHeader.header.comm_max = MAX_COMMENT_LEN - 1; } } if (compDictObj != NULL) { cd->compDictObj = Tcl_DuplicateObj(compDictObj); Tcl_IncrRefCount(cd->compDictObj); Tcl_GetByteArrayFromObj(cd->compDictObj, NULL); } if (format == TCL_ZLIB_FORMAT_RAW) { wbits = WBITS_RAW; } else if (format == TCL_ZLIB_FORMAT_ZLIB) { wbits = WBITS_ZLIB; } else if (format == TCL_ZLIB_FORMAT_GZIP) { wbits = WBITS_GZIP; } else if (format == TCL_ZLIB_FORMAT_AUTO) { wbits = WBITS_AUTODETECT; } else { Tcl_Panic("bad format: %d", format); } /* * Initialize input inflater or the output deflater. */ if (mode == TCL_ZLIB_STREAM_INFLATE) { e = inflateInit2(&cd->inStream, wbits); if (e != Z_OK) { goto error; } cd->inAllocated = DEFAULT_BUFFER_SIZE; cd->inBuffer = ckalloc(cd->inAllocated); if (cd->flags & IN_HEADER) { e = inflateGetHeader(&cd->inStream, &cd->inHeader.header); if (e != Z_OK) { goto error; } } } else { e = deflateInit2(&cd->outStream, level, Z_DEFLATED, wbits, MAX_MEM_LEVEL, Z_DEFAULT_STRATEGY); if (e != Z_OK) { goto error; } cd->outAllocated = DEFAULT_BUFFER_SIZE; cd->outBuffer = ckalloc(cd->outAllocated); if (cd->flags & OUT_HEADER) { e = deflateSetHeader(&cd->outStream, &cd->outHeader.header); if (e != Z_OK) { goto error; } } if (cd->compDictObj) { e = SetDeflateDictionary(&cd->outStream, cd->compDictObj); if (e != Z_OK) { goto error; } } } chan = Tcl_StackChannel(interp, &zlibChannelType, cd, Tcl_GetChannelMode(channel), channel); if (chan == NULL) { goto error; } cd->chan = chan; cd->parent = Tcl_GetStackedChannel(chan); Tcl_SetObjResult(interp, Tcl_NewStringObj(Tcl_GetChannelName(chan), -1)); return chan; error: if (cd->inBuffer) { ckfree(cd->inBuffer); inflateEnd(&cd->inStream); } if (cd->outBuffer) { ckfree(cd->outBuffer); deflateEnd(&cd->outStream); } if (cd->compDictObj) { Tcl_DecrRefCount(cd->compDictObj); } ckfree(cd); return NULL; } /* *---------------------------------------------------------------------- * Finally, the TclZlibInit function. Used to install the zlib API. *---------------------------------------------------------------------- */ int TclZlibInit( Tcl_Interp *interp) { /* * This does two things. It creates a counter used in the creation of * stream commands, and it creates the namespace that will contain those * commands. */ Tcl_Eval(interp, "namespace eval ::tcl::zlib {variable cmdcounter 0}"); /* * Create the public scripted interface to this file's functionality. */ Tcl_CreateObjCommand(interp, "zlib", ZlibCmd, 0, 0); return TCL_OK; } /* *---------------------------------------------------------------------- * Stubs used when a suitable zlib installation was not found during * configure. *---------------------------------------------------------------------- */ #else /* !HAVE_ZLIB */ int Tcl_ZlibStreamInit( Tcl_Interp *interp, int mode, int format, int level, Tcl_Obj *dictObj, Tcl_ZlibStream *zshandle) { Tcl_SetResult(interp, "unimplemented", TCL_STATIC); Tcl_SetErrorCode(interp, "TCL", "UNIMPLEMENTED", NULL); return TCL_ERROR; } int Tcl_ZlibStreamClose( Tcl_ZlibStream zshandle) { return TCL_OK; } int Tcl_ZlibStreamReset( Tcl_ZlibStream zshandle) { return TCL_OK; } Tcl_Obj * Tcl_ZlibStreamGetCommandName( Tcl_ZlibStream zshandle) { return NULL; } int Tcl_ZlibStreamEof( Tcl_ZlibStream zshandle) { return 1; } int Tcl_ZlibStreamChecksum( Tcl_ZlibStream zshandle) { return 0; } int Tcl_ZlibStreamPut( Tcl_ZlibStream zshandle, Tcl_Obj *data, int flush) { return TCL_OK; } int Tcl_ZlibStreamGet( Tcl_ZlibStream zshandle, Tcl_Obj *data, int count) { return TCL_OK; } int Tcl_ZlibDeflate( Tcl_Interp *interp, int format, Tcl_Obj *data, int level, Tcl_Obj *gzipHeaderDictObj) { Tcl_SetResult(interp, "unimplemented", TCL_STATIC); Tcl_SetErrorCode(interp, "TCL", "UNIMPLEMENTED", NULL); return TCL_ERROR; } int Tcl_ZlibInflate( Tcl_Interp *interp, int format, Tcl_Obj *data, int bufferSize, Tcl_Obj *gzipHeaderDictObj) { Tcl_SetResult(interp, "unimplemented", TCL_STATIC); Tcl_SetErrorCode(interp, "TCL", "UNIMPLEMENTED", NULL); return TCL_ERROR; } unsigned int Tcl_ZlibCRC32( unsigned int crc, const char *buf, int len) { return 0; } unsigned int Tcl_ZlibAdler32( unsigned int adler, const char *buf, int len) { return 0; } int Tcl_ZlibStreamSetCompressionDictionary( Tcl_Interp *interp, Tcl_ZlibStream zhandle, Tcl_Obj *compressionDictionaryObj) { Tcl_SetResult(interp, "unimplemented", TCL_STATIC); Tcl_SetErrorCode(interp, "TCL", "UNIMPLEMENTED", NULL); return TCL_ERROR; } #endif /* HAVE_ZLIB */ /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */