# http.tcl -- # # Client-side HTTP for GET, POST, and HEAD commands. These routines can # be used in untrusted code that uses the Safesock security policy. These # procedures use a callback interface to avoid using vwait, which is not # defined in the safe base. # # See the file "license.terms" for information on usage and redistribution of # this file, and for a DISCLAIMER OF ALL WARRANTIES. # # RCS: @(#) $Id: http.tcl,v 1.43.2.9 2005/11/18 15:20:47 dkf Exp $ # Rough version history: # 1.0 Old http_get interface. # 2.0 http:: namespace and http::geturl. # 2.1 Added callbacks to handle arriving data, and timeouts. # 2.2 Added ability to fetch into a channel. # 2.3 Added SSL support, and ability to post from a channel. This version # also cleans up error cases and eliminates the "ioerror" status in # favor of raising an error # 2.4 Added -binary option to http::geturl and charset element to the state # array. package require Tcl 8.4 # Keep this in sync with pkgIndex.tcl and with the install directories # in Makefiles package provide http 2.5.2 namespace eval http { variable http array set http { -accept */* -proxyhost {} -proxyport {} -proxyfilter http::ProxyRequired -urlencoding utf-8 } set http(-useragent) "Tcl http client package [package provide http]" proc init {} { # Set up the map for quoting chars. RFC3986 Section 2.3 say percent # encode all except: "... percent-encoded octets in the ranges of ALPHA # (%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period (%2E), # underscore (%5F), or tilde (%7E) should not be created by URI # producers ..." for {set i 0} {$i <= 256} {incr i} { set c [format %c $i] if {![string match {[-._~a-zA-Z0-9]} $c]} { set map($c) %[format %.2x $i] } } # These are handled specially array set map { " " + \n %0d%0a } variable formMap [array get map] } init variable urlTypes array set urlTypes { http {80 ::socket} } variable encodings [string tolower [encoding names]] # This can be changed, but iso8859-1 is the RFC standard. variable defaultCharset "iso8859-1" namespace export geturl config reset wait formatQuery register unregister # Useful, but not exported: data size status code } # http::register -- # # See documentaion for details. # # Arguments: # proto URL protocol prefix, e.g. https # port Default port for protocol # command Command to use to create socket # Results: # list of port and command that was registered. proc http::register {proto port command} { variable urlTypes set urlTypes($proto) [list $port $command] } # http::unregister -- # # Unregisters URL protocol handler # # Arguments: # proto URL protocol prefix, e.g. https # Results: # list of port and command that was unregistered. proc http::unregister {proto} { variable urlTypes if {![info exists urlTypes($proto)]} { return -code error "unsupported url type \"$proto\"" } set old $urlTypes($proto) unset urlTypes($proto) return $old } # http::config -- # # See documentaion for details. # # Arguments: # args Options parsed by the procedure. # Results: # TODO proc http::config {args} { variable http set options [lsort [array names http -*]] set usage [join $options ", "] if {[llength $args] == 0} { set result {} foreach name $options { lappend result $name $http($name) } return $result } set options [string map {- ""} $options] set pat ^-([join $options |])$ if {[llength $args] == 1} { set flag [lindex $args 0] if {[regexp -- $pat $flag]} { return $http($flag) } else { return -code error "Unknown option $flag, must be: $usage" } } else { foreach {flag value} $args { if {[regexp -- $pat $flag]} { set http($flag) $value } else { return -code error "Unknown option $flag, must be: $usage" } } } } # http::Finish -- # # Clean up the socket and eval close time callbacks # # Arguments: # token Connection token. # errormsg (optional) If set, forces status to error. # skipCB (optional) If set, don't call the -command callback. This # is useful when geturl wants to throw an exception instead # of calling the callback. That way, the same error isn't # reported to two places. # # Side Effects: # Closes the socket proc http::Finish { token {errormsg ""} {skipCB 0}} { variable $token upvar 0 $token state global errorInfo errorCode if {[string length $errormsg] != 0} { set state(error) [list $errormsg $errorInfo $errorCode] set state(status) error } catch {close $state(sock)} catch {after cancel $state(after)} if {[info exists state(-command)] && !$skipCB} { if {[catch {eval $state(-command) {$token}} err]} { if {[string length $errormsg] == 0} { set state(error) [list $err $errorInfo $errorCode] set state(status) error } } if {[info exists state(-command)]} { # Command callback may already have unset our state unset state(-command) } } } # http::reset -- # # See documentaion for details. # # Arguments: # token Connection token. # why Status info. # # Side Effects: # See Finish proc http::reset { token {why reset} } { variable $token upvar 0 $token state set state(status) $why catch {fileevent $state(sock) readable {}} catch {fileevent $state(sock) writable {}} Finish $token if {[info exists state(error)]} { set errorlist $state(error) unset state eval ::error $errorlist } } # http::geturl -- # # Establishes a connection to a remote url via http. # # Arguments: # url The http URL to goget. # args Option value pairs. Valid options include: # -blocksize, -validate, -headers, -timeout # Results: # Returns a token for this connection. This token is the name of an array # that the caller should unset to garbage collect the state. proc http::geturl { url args } { variable http variable urlTypes variable defaultCharset # Initialize the state variable, an array. We'll return the name of this # array as the token for the transaction. if {![info exists http(uid)]} { set http(uid) 0 } set token [namespace current]::[incr http(uid)] variable $token upvar 0 $token state reset $token # Process command options. array set state { -binary false -blocksize 8192 -queryblocksize 8192 -validate 0 -headers {} -timeout 0 -type application/x-www-form-urlencoded -queryprogress {} state header meta {} coding {} currentsize 0 totalsize 0 querylength 0 queryoffset 0 type text/html body {} status "" http "" } # These flags have their types verified [Bug 811170] array set type { -binary boolean -blocksize integer -queryblocksize integer -validate boolean -timeout integer } set state(charset) $defaultCharset set options {-binary -blocksize -channel -command -handler -headers \ -progress -query -queryblocksize -querychannel -queryprogress\ -validate -timeout -type} set usage [join $options ", "] set options [string map {- ""} $options] set pat ^-([join $options |])$ foreach {flag value} $args { if {[regexp $pat $flag]} { # Validate numbers if {[info exists type($flag)] && \ ![string is $type($flag) -strict $value]} { unset $token return -code error "Bad value for $flag ($value), must be $type($flag)" } set state($flag) $value } else { unset $token return -code error "Unknown option $flag, can be: $usage" } } # Make sure -query and -querychannel aren't both specified set isQueryChannel [info exists state(-querychannel)] set isQuery [info exists state(-query)] if {$isQuery && $isQueryChannel} { unset $token return -code error "Can't combine -query and -querychannel options!" } # Validate URL, determine the server host and port, and check proxy case # Recognize user:pass@host URLs also, although we do not do anything with # that info yet. # URLs have basically four parts. # First, before the colon, is the protocol scheme (e.g. http) # Second, for HTTP-like protocols, is the authority # The authority is preceded by // and lasts up to (but not including) # the following / and it identifies up to four parts, of which only one, # the host, is required (if an authority is present at all). All other # parts of the authority (user name, password, port number) are optional. # Third is the resource name, which is split into two parts at a ? # The first part (from the single "/" up to "?") is the path, and the # second part (from that "?" up to "#") is the query. *HOWEVER*, we do # not need to separate them; we send the whole lot to the server. # Fourth is the fragment identifier, which is everything after the first # "#" in the URL. The fragment identifier MUST NOT be sent to the server # and indeed, we don't bother to validate it (it could be an error to # pass it in here, but it's cheap to strip). # # An example of a URL that has all the parts: # http://jschmoe:xyzzy@www.bogus.net:8000/foo/bar.tml?q=foo#changes # The "http" is the protocol, the user is "jschmoe", the password is # "xyzzy", the host is "www.bogus.net", the port is "8000", the path is # "/foo/bar.tml", the query is "q=foo", and the fragment is "changes". # # Note that the RE actually combines the user and password parts, as # recommended in RFC 3986. Indeed, that RFC states that putting passwords # in URLs is a Really Bad Idea, something with which I would agree utterly. # Also note that we do not currently support IPv6 addresses. # # From a validation perspective, we need to ensure that the parts of the # URL that are going to the server are correctly encoded. set URLmatcher {(?x) # this is _expanded_ syntax ^ (?: (\w+) : ) ? # (?: // (?: ( [^@/\#?]+ # ) @ )? ( [^/:\#?]+ ) # (?: : (\d+) )? # )? ( / [^\#?]* (?: \? [^\#?]* )?)? # (including query) (?: \# (.*) )? # $ } # Phase one: parse if {![regexp -- $URLmatcher $url -> proto user host port srvurl]} { unset $token return -code error "Unsupported URL: $url" } # Phase two: validate if {$host eq ""} { # Caller has to provide a host name; we do not have a "default host" # that would enable us to handle relative URLs. unset $token return -code error "Missing host part: $url" # Note that we don't check the hostname for validity here; if it's # invalid, we'll simply fail to resolve it later on. } if {$port ne "" && $port>65535} { unset $token return -code error "Invalid port number: $port" } # The user identification and resource identification parts of the URL can # have encoded characters in them; take care! if {$user ne ""} { # Check for validity according to RFC 3986, Appendix A set validityRE {(?xi) ^ (?: [-\w.~!$&'()*+,;=:] | %[0-9a-f][0-9a-f] )+ $ } if {![regexp -- $validityRE $user]} { unset $token # Provide a better error message in this error case if {[regexp {(?i)%(?![0-9a-f][0-9a-f]).?.?} $user bad]} { return -code error \ "Illegal encoding character usage \"$bad\" in URL user" } return -code error "Illegal characters in URL user" } } if {$srvurl ne ""} { # Check for validity according to RFC 3986, Appendix A set validityRE {(?xi) ^ # Path part (already must start with / character) (?: [-\w.~!$&'()*+,;=:@/] | %[0-9a-f][0-9a-f] )* # Query part (optional, permits ? characters) (?: \? (?: [-\w.~!$&'()*+,;=:@/?] | %[0-9a-f][0-9a-f] )* )? $ } if {![regexp -- $validityRE $srvurl]} { unset $token # Provide a better error message in this error case if {[regexp {(?i)%(?![0-9a-f][0-9a-f])..} $srvurl bad]} { return -code error \ "Illegal encoding character usage \"$bad\" in URL path" } return -code error "Illegal characters in URL path" } } else { set srvurl / } if {[string length $proto] == 0} { set proto http set url ${proto}:$url } if {![info exists urlTypes($proto)]} { unset $token return -code error "Unsupported URL type \"$proto\"" } set defport [lindex $urlTypes($proto) 0] set defcmd [lindex $urlTypes($proto) 1] if {[string length $port] == 0} { set port $defport } if {![catch {$http(-proxyfilter) $host} proxy]} { set phost [lindex $proxy 0] set pport [lindex $proxy 1] } # OK, now reassemble into a full URL set url ${proto}:// if {$user ne ""} { append url $user append url @ } append url $host if {$port != $defport} { append url : $port } append url $srvurl # Don't append the fragment! set state(url) $url # If a timeout is specified we set up the after event and arrange for an # asynchronous socket connection. if {$state(-timeout) > 0} { set state(after) [after $state(-timeout) \ [list http::reset $token timeout]] set async -async } else { set async "" } # If we are using the proxy, we must pass in the full URL that includes # the server name. if {[info exists phost] && [string length $phost]} { set srvurl $url set conStat [catch {eval $defcmd $async {$phost $pport}} s] } else { set conStat [catch {eval $defcmd $async {$host $port}} s] } if {$conStat} { # Something went wrong while trying to establish the connection. Clean # up after events and such, but DON'T call the command callback (if # available) because we're going to throw an exception from here # instead. Finish $token "" 1 cleanup $token return -code error $s } set state(sock) $s # Wait for the connection to complete. if {$state(-timeout) > 0} { fileevent $s writable [list http::Connect $token] http::wait $token if {$state(status) eq "error"} { # Something went wrong while trying to establish the connection. # Clean up after events and such, but DON'T call the command # callback (if available) because we're going to throw an # exception from here instead. set err [lindex $state(error) 0] cleanup $token return -code error $err } elseif {$state(status) ne "connect"} { # Likely to be connection timeout return $token } set state(status) "" } # Send data in cr-lf format, but accept any line terminators fconfigure $s -translation {auto crlf} -buffersize $state(-blocksize) # The following is disallowed in safe interpreters, but the socket is # already in non-blocking mode in that case. catch {fconfigure $s -blocking off} set how GET if {$isQuery} { set state(querylength) [string length $state(-query)] if {$state(querylength) > 0} { set how POST set contDone 0 } else { # There's no query data. unset state(-query) set isQuery 0 } } elseif {$state(-validate)} { set how HEAD } elseif {$isQueryChannel} { set how POST # The query channel must be blocking for the async Write to # work properly. fconfigure $state(-querychannel) -blocking 1 -translation binary set contDone 0 } if {[catch { puts $s "$how $srvurl HTTP/1.0" puts $s "Accept: $http(-accept)" if {$port == $defport} { # Don't add port in this case, to handle broken servers. [Bug # 504508] puts $s "Host: $host" } else { puts $s "Host: $host:$port" } puts $s "User-Agent: $http(-useragent)" foreach {key value} $state(-headers) { set value [string map [list \n "" \r ""] $value] set key [string trim $key] if {$key eq "Content-Length"} { set contDone 1 set state(querylength) $value } if {[string length $key]} { puts $s "$key: $value" } } if {$isQueryChannel && $state(querylength) == 0} { # Try to determine size of data in channel. If we cannot seek, the # surrounding catch will trap us set start [tell $state(-querychannel)] seek $state(-querychannel) 0 end set state(querylength) \ [expr {[tell $state(-querychannel)] - $start}] seek $state(-querychannel) $start } # Flush the request header and set up the fileevent that will either # push the POST data or read the response. # # fileevent note: # # It is possible to have both the read and write fileevents active at # this point. The only scenario it seems to affect is a server that # closes the connection without reading the POST data. (e.g., early # versions TclHttpd in various error cases). Depending on the platform, # the client may or may not be able to get the response from the server # because of the error it will get trying to write the post data. # Having both fileevents active changes the timing and the behavior, # but no two platforms (among Solaris, Linux, and NT) behave the same, # and none behave all that well in any case. Servers should always read # their POST data if they expect the client to read their response. if {$isQuery || $isQueryChannel} { puts $s "Content-Type: $state(-type)" if {!$contDone} { puts $s "Content-Length: $state(querylength)" } puts $s "" fconfigure $s -translation {auto binary} fileevent $s writable [list http::Write $token] } else { puts $s "" flush $s fileevent $s readable [list http::Event $token] } if {! [info exists state(-command)]} { # geturl does EVERYTHING asynchronously, so if the user calls it # synchronously, we just do a wait here. wait $token if {$state(status) eq "error"} { # Something went wrong, so throw the exception, and the # enclosing catch will do cleanup. return -code error [lindex $state(error) 0] } } } err]} { # The socket probably was never connected, or the connection dropped # later. # Clean up after events and such, but DON'T call the command callback # (if available) because we're going to throw an exception from here # instead. # if state(status) is error, it means someone's already called Finish # to do the above-described clean up. if {$state(status) eq "error"} { Finish $token $err 1 } cleanup $token return -code error $err } return $token } # Data access functions: # Data - the URL data # Status - the transaction status: ok, reset, eof, timeout # Code - the HTTP transaction code, e.g., 200 # Size - the size of the URL data proc http::data {token} { variable $token upvar 0 $token state return $state(body) } proc http::status {token} { variable $token upvar 0 $token state return $state(status) } proc http::code {token} { variable $token upvar 0 $token state return $state(http) } proc http::ncode {token} { variable $token upvar 0 $token state if {[regexp {[0-9]{3}} $state(http) numeric_code]} { return $numeric_code } else { return $state(http) } } proc http::size {token} { variable $token upvar 0 $token state return $state(currentsize) } proc http::error {token} { variable $token upvar 0 $token state if {[info exists state(error)]} { return $state(error) } return "" } # http::cleanup # # Garbage collect the state associated with a transaction # # Arguments # token The token returned from http::geturl # # Side Effects # unsets the state array proc http::cleanup {token} { variable $token upvar 0 $token state if {[info exists state]} { unset state } } # http::Connect # # This callback is made when an asyncronous connection completes. # # Arguments # token The token returned from http::geturl # # Side Effects # Sets the status of the connection, which unblocks # the waiting geturl call proc http::Connect {token} { variable $token upvar 0 $token state global errorInfo errorCode if {[eof $state(sock)] || [string length [fconfigure $state(sock) -error]]} { Finish $token "connect failed [fconfigure $state(sock) -error]" 1 } else { set state(status) connect fileevent $state(sock) writable {} } return } # http::Write # # Write POST query data to the socket # # Arguments # token The token for the connection # # Side Effects # Write the socket and handle callbacks. proc http::Write {token} { variable $token upvar 0 $token state set s $state(sock) # Output a block. Tcl will buffer this if the socket blocks set done 0 if {[catch { # Catch I/O errors on dead sockets if {[info exists state(-query)]} { # Chop up large query strings so queryprogress callback can give # smooth feedback. puts -nonewline $s \ [string range $state(-query) $state(queryoffset) \ [expr {$state(queryoffset) + $state(-queryblocksize) - 1}]] incr state(queryoffset) $state(-queryblocksize) if {$state(queryoffset) >= $state(querylength)} { set state(queryoffset) $state(querylength) set done 1 } } else { # Copy blocks from the query channel set outStr [read $state(-querychannel) $state(-queryblocksize)] puts -nonewline $s $outStr incr state(queryoffset) [string length $outStr] if {[eof $state(-querychannel)]} { set done 1 } } } err]} { # Do not call Finish here, but instead let the read half of the socket # process whatever server reply there is to get. set state(posterror) $err set done 1 } if {$done} { catch {flush $s} fileevent $s writable {} fileevent $s readable [list http::Event $token] } # Callback to the client after we've completely handled everything. if {[string length $state(-queryprogress)]} { eval $state(-queryprogress) [list $token $state(querylength)\ $state(queryoffset)] } } # http::Event # # Handle input on the socket # # Arguments # token The token returned from http::geturl # # Side Effects # Read the socket and handle callbacks. proc http::Event {token} { variable $token upvar 0 $token state set s $state(sock) if {[eof $s]} { Eof $token return } if {$state(state) eq "header"} { if {[catch {gets $s line} n]} { Finish $token $n } elseif {$n == 0} { variable encodings set state(state) body if {$state(-binary) || ![string match -nocase text* $state(type)] || [string match *gzip* $state(coding)] || [string match *compress* $state(coding)]} { # Turn off conversions for non-text data fconfigure $s -translation binary if {[info exists state(-channel)]} { fconfigure $state(-channel) -translation binary } } else { # If we are getting text, set the incoming channel's encoding # correctly. iso8859-1 is the RFC default, but this could be # any IANA charset. However, we only know how to convert what # we have encodings for. set idx [lsearch -exact $encodings \ [string tolower $state(charset)]] if {$idx >= 0} { fconfigure $s -encoding [lindex $encodings $idx] } } if {[info exists state(-channel)] && \ ![info exists state(-handler)]} { # Initiate a sequence of background fcopies fileevent $s readable {} CopyStart $s $token } } elseif {$n > 0} { if {[regexp -nocase {^content-type:(.+)$} $line x type]} { set state(type) [string trim $type] # grab the optional charset information regexp -nocase {charset\s*=\s*(\S+)} $type x state(charset) } if {[regexp -nocase {^content-length:(.+)$} $line x length]} { set state(totalsize) [string trim $length] } if {[regexp -nocase {^content-encoding:(.+)$} $line x coding]} { set state(coding) [string trim $coding] } if {[regexp -nocase {^([^:]+):(.+)$} $line x key value]} { lappend state(meta) $key [string trim $value] } elseif {[string match HTTP* $line]} { set state(http) $line } } } else { if {[catch { if {[info exists state(-handler)]} { set n [eval $state(-handler) {$s $token}] } else { set block [read $s $state(-blocksize)] set n [string length $block] if {$n >= 0} { append state(body) $block } } if {$n >= 0} { incr state(currentsize) $n } } err]} { Finish $token $err } else { if {[info exists state(-progress)]} { eval $state(-progress) \ {$token $state(totalsize) $state(currentsize)} } } } } # http::CopyStart # # Error handling wrapper around fcopy # # Arguments # s The socket to copy from # token The token returned from http::geturl # # Side Effects # This closes the connection upon error proc http::CopyStart {s token} { variable $token upvar 0 $token state if {[catch { fcopy $s $state(-channel) -size $state(-blocksize) -command \ [list http::CopyDone $token] } err]} { Finish $token $err } } # http::CopyDone # # fcopy completion callback # # Arguments # token The token returned from http::geturl # count The amount transfered # # Side Effects # Invokes callbacks proc http::CopyDone {token count {error {}}} { variable $token upvar 0 $token state set s $state(sock) incr state(currentsize) $count if {[info exists state(-progress)]} { eval $state(-progress) {$token $state(totalsize) $state(currentsize)} } # At this point the token may have been reset if {[string length $error]} { Finish $token $error } elseif {[catch {eof $s} iseof] || $iseof} { Eof $token } else { CopyStart $s $token } } # http::Eof # # Handle eof on the socket # # Arguments # token The token returned from http::geturl # # Side Effects # Clean up the socket proc http::Eof {token} { variable $token upvar 0 $token state if {$state(state) eq "header"} { # Premature eof set state(status) eof } else { set state(status) ok } set state(state) eof Finish $token } # http::wait -- # # See documentaion for details. # # Arguments: # token Connection token. # # Results: # The status after the wait. proc http::wait {token} { variable $token upvar 0 $token state if {![info exists state(status)] || [string length $state(status)] == 0} { # We must wait on the original variable name, not the upvar alias vwait $token\(status) } return $state(status) } # http::formatQuery -- # # See documentaion for details. Call http::formatQuery with an even # number of arguments, where the first is a name, the second is a value, # the third is another name, and so on. # # Arguments: # args A list of name-value pairs. # # Results: # TODO proc http::formatQuery {args} { set result "" set sep "" foreach i $args { append result $sep [mapReply $i] if {$sep eq "="} { set sep & } else { set sep = } } return $result } # http::mapReply -- # # Do x-www-urlencoded character mapping # # Arguments: # string The string the needs to be encoded # # Results: # The encoded string proc http::mapReply {string} { variable http variable formMap # The spec says: "non-alphanumeric characters are replaced by '%HH'". Use # a pre-computed map and [string map] to do the conversion (much faster # than [regsub]/[subst]). [Bug 1020491] if {$http(-urlencoding) ne ""} { set string [encoding convertto $http(-urlencoding) $string] return [string map $formMap $string] } set converted [string map $formMap $string] if {[string match "*\[\u0100-\uffff\]*" $converted]} { regexp {[\u0100-\uffff]} $converted badChar # Return this error message for maximum compatability... :^/ return -code error \ "can't read \"formMap($badChar)\": no such element in array" } return $converted } # http::ProxyRequired -- # Default proxy filter. # # Arguments: # host The destination host # # Results: # The current proxy settings proc http::ProxyRequired {host} { variable http if {[info exists http(-proxyhost)] && [string length $http(-proxyhost)]} { if {![info exists http(-proxyport)] || \ ![string length $http(-proxyport)]} { set http(-proxyport) 8080 } return [list $http(-proxyhost) $http(-proxyport)] } }