# Test cases for large sized data
#
# Copyright © 2023 Ashok P. Nadkarni
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.

# These are very rudimentary tests for large size arguments to commands.
# They do not exercise all possible code paths such as shared/unshared Tcl_Objs,
# literal/variable arguments etc.
# They do however test compiled and uncompiled execution.

if {"::tcltest" ni [namespace children]} {
    package require tcltest

    namespace import -force ::tcltest::*
}

::tcltest::loadTestedCommands
catch [list package require -exact tcl::test [info patchlevel]]
source [file join [file dirname [info script]] tcltests.tcl]

#
# bigtest and bigtestRO (RO->read only) generate compiled and uncompiled
# versions of the given test script. The difference between the two is
# that bigtest generates separate test instances for the two cases while
# bigtestRO generates a single test case covering both. The latter can
# only be used when operands are not modified and when combining tests
# does not consume too much additional memory.

# Wrapper to generate compiled and uncompiled cases for a test. If $args does
# not contain a -body key, $comment is treated as the test body
proc bigtest {id comment result args} {
    if {[dict exists $args -body]} {
        set body [dict get $args -body]
        dict unset args -body
    } else {
        set body $comment
    }
    dict lappend args -constraints bigdata

    uplevel 1 [list test $id.uncompiled "$comment (uncompiled)" \
                   -body [list testevalex $body] \
                   -result $result \
                   {*}$args]

    uplevel 1 [list test $id.compiled-script "$comment (compiled script)" \
                   -body [list try $body] \
                   -result $result \
                   {*}$args]

    return

    # TODO - is this proc compilation required separately from the compile-script above?
    dict append args -setup \n[list proc testxproc {} $body]
    dict append args -cleanup "\nrename testxproc {}"
    uplevel 1 [list test $id.compiled-proc "$comment (compiled proc)" \
                   -body {testxproc} \
                   -result $result \
                   {*}$args]
}

# Like bigtest except that both compiled and uncompiled are combined into one
# test using the same inout argument. This saves time but for obvious reasons
# should only be used when the input argument is not modified.
proc bigtestRO {id comment result args} {
    if {[dict exists $args -body]} {
        set body [dict get $args -body]
        dict unset args -body
    } else {
        set body $comment
    }
    dict lappend args -constraints bigdata

    set wrapper ""
    set body "{$body}"
    append wrapper "set uncompiled_result \[testevalex $body]" \n
    append wrapper "set compiled_result \[try $body]" \n
    append wrapper {list $uncompiled_result $compiled_result}
    uplevel 1 [list test $id.uncompiled,compiled {$comment} \
                   -body $wrapper \
                   -result [list $result $result] \
                   {*}$args]
    return
}

interp alias {} bigClean {} unset -nocomplain s s1 s2 bin bin1 bin2 l l1 l2

interp alias {} bigString {} testbigdata string
interp alias {} bigBinary {} testbigdata bytearray
interp alias {} bigList {} testbigdata list
proc bigPatLen {} {
    proc bigPatLen {} "return [string length [testbigdata string]]"
    bigPatLen
}

# Returns list of expected elements at the indices specified
proc bigStringIndices {indices} {
    set pat [testbigdata string]
    set patlen [string length $pat]
    lmap idx $indices {
        string index $pat [expr {$idx%$patlen}]
    }
}

# Returns the largest multiple of the pattern length that is less than $limit
proc bigPatlenMultiple {limit} {
    set patlen [bigPatLen]
    return [expr {($limit/$patlen)*$patlen}]
}

set ::bigLengths(intmax) 0x7fffffff
set ::bigLengths(uintmax) 0xffffffff
# Some tests are more convenient if operands are multiple of pattern length
if {[testConstraint bigdata]} {
set ::bigLengths(patlenmultiple) [bigPatlenMultiple $::bigLengths(intmax)]
set ::bigLengths(upatlenmultiple) [bigPatlenMultiple $::bigLengths(uintmax)]
}

#
# script limits
bigtestRO script-length-bigdata-1 {Test script length limit} b -body {
    try [string cat [string repeat " " 0x7ffffff7] "set a b"]
}
# TODO - different behaviour between compiled and uncompiled
test script-length-bigdata-2.compiled {Test script length limit} -body {
    try [string cat [string repeat " " 0x7ffffff8] "set a b"]
} -constraints {
    bigdata
} -result {Script length 2147483647 exceeds max permitted length 2147483646.} -returnCodes error
test script-length-bigdata-2.uncompiled {Test script length limit} -body {
    testevalex [string cat [string repeat " " 0x7ffffff8] "set a b"]
} -constraints {
    bigdata
 } -result b
test script-bytecode-length-bigdata-1 {Test bytecode length limit} -body {
    # Note we need to exceed bytecode limit without exceeding script char limit
    set s [string repeat {{*}$x;} [expr 0x7fffffff/6]]
    catch $s r e
} -cleanup {
    bigClean
} -constraints panic-in-EnterCmdStartData

#
# string cat
bigtest string-cat-bigdata-1 "string cat large small result > INT_MAX" 1 -body {
    string equal \
        [string cat [bigString $::bigLengths(patlenmultiple)] [bigString]] \
        [bigString [expr {[bigPatLen]+$::bigLengths(patlenmultiple)}]]
}
bigtest string-cat-bigdata-2 "string cat small large result > INT_MAX" 1 -body {
    string equal \
        [string cat [bigString] [bigString $::bigLengths(patlenmultiple)]] \
        [bigString [expr {[bigPatLen]+$::bigLengths(patlenmultiple)}]]
}
bigtest string-cat-bigdata-3 "string cat result > UINT_MAX" 1 -body {
    set s [bigString $::bigLengths(patlenmultiple)]
    string equal \
        [string cat $s [bigString] $s] \
        [bigString [expr {[bigPatLen]+2*$::bigLengths(patlenmultiple)}]]
}

#
# string compare/equal
bigtestRO string-equal/compare-bigdata-1 "string compare/equal equal strings" {0 1} -body {
    list [string compare $s1 $s2] [string equal $s1 $s2]
} -setup {
    set s1 [bigString 0x100000000]
    set s2 [bigString 0x100000000]; # Separate so Tcl_Obj is not the same
} -cleanup {
    bigClean
}
bigtestRO string-equal/compare-bigdata-2 "string compare/equal -length unequal strings" {-1 0 0 1} -body {
    # Also tests lengths do not wrap
    set result {}
    lappend result [string compare $s1 $s2]
    lappend result [string equal $s1 $s2]
    # Check lengths > UINT_MAX
    # Also that lengths do not truncate to sizeof(int)
    lappend result [string compare -length 0x100000000 $s1 $s2]
    lappend result [string equal -length 0x100000000 $s1 $s2]
} -setup {
    set s1 [bigString 0x100000001]
    set s2 [bigString 0x100000001 0x100000000]; # Differs in last char
} -cleanup {
    bigClean
}

#
# string first
bigtestRO string-first-bigdata-1 "string first > INT_MAX" {2147483648 -1 2147483650 1} -body {
    list \
        [string first X $s] \
        [string first Y $s] \
        [string first 0 $s 0x80000000] \
        [string first 1 $s end-0x80000010]
} -setup {
    set s [bigString 0x8000000a 0x80000000]
} -cleanup {
    bigClean
}

bigtestRO string-first-bigdata-2 "string first > UINT_MAX" {4294967296 -1 4294967300 1} -body {
    list \
        [string first X $s] \
        [string first Y $s] \
        [string first 0 $s 0x100000000] \
        [string first 1 $s end-0x100000010]
} -setup {
    set s [bigString 0x10000000a 0x100000000]
} -cleanup {
    bigClean
}

bigtestRO string-first-bigdata-3 "string first - long needle" 10 -body {
    string first $needle $s
} -setup {
    set s [bigString 0x10000000a 0]
    set needle [bigString 0x100000000]
} -cleanup {
   bigClean needle
}

#
# string index
bigtestRO string-index-bigdata-1 "string index" {6 7 5 {} 5 4 {} 9 {}} -body {
    list \
        [string index $s 0x100000000] \
        [string index $s 0x100000000+1] \
        [string index $s 0x100000000-1] \
        [string index $s 0x10000000a] \
        [string index $s end] \
        [string index $s end-1] \
        [string index $s end+1] \
        [string index $s end-0x100000000] \
        [string index $s end-0x10000000a]
} -setup {
    set s [bigString 0x10000000a]
} -cleanup {
    bigClean
}

#
# string insert
bigtestRO string-insert-bigdata-1 "string insert" 1 -body {
    # Note insert at multiple of 10 to enable comparison against generated string
    string equal [string insert [bigString 4294967312] 4294967310 "0123456789"] [bigString 4294967322]
}
bigtestRO string-insert-bigdata-2 "string insert" 1 -body {
    string equal [string insert [bigString 4294967312] 10 "0123456789"] [bigString 4294967322]
}

#
# string is
bigtestRO string-is-bigdata-1 "string is" {1 0 0 4294967296} -body {
    # TODO - add the other "is" classes
    unset -nocomplain failat result
    lappend result [string is alnum -failindex failat $s] [info exists failat]
    lappend result [string is digit -failindex failat $s] $failat
} -setup {
    set s [bigString 0x10000000a 0x100000000]
} -cleanup {
    bigClean failat
}

#
# string last
bigtestRO string-last-bigdata-1 "string last > INT_MAX" {2 -1 2147483640 11} -body {
    set s [bigString 0x80000010 2]
    list \
        [string last X $s] \
        [string last Y $s] \
        [string last 0 $s 0x80000000] \
        [string last 1 $s end-0x80000000]
} -setup {
    set s [bigString 0x80000010 2]
} -cleanup {
    bigClean
}
bigtestRO string-last-bigdata-2 "string last > UINT_MAX" {4294967320 -1 4294967290 1} -body {
    list \
        [string last 0 $s] \
        [string last Y $s] \
        [string last 0 $s 0x100000000] \
        [string last 1 $s end-0x100000010]
} -setup {
    set s [bigString 0x10000001a 2]
} -cleanup {
    bigClean
}
bigtestRO string-last-bigdata-3 "string last - long needle" 0 -body {
    string last $needle $s
} -setup {
    set s [bigString 0x10000000a 0x10000000a]
    set needle [bigString 0x100000000]
} -cleanup {
    bigClean needle
}

#
# string length
bigtestRO string-length-bigdata-1 {string length $s} 4294967296 -setup {
    set s [bigString 0x100000000]
} -cleanup {
    bigClean
}

#
# string map
bigtestRO string-map-bigdata-1 {string map} {5 0 0 5} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain s2
    set s2 [string map {0 5 5 0} $s]
    list \
        [string index $s2 0] \
        [string index $s2 5] \
        [string index $s2 end] \
        [string index $s2 end-5]
} -setup {
    set s [bigString 0x100000000]
} -cleanup {
    bigClean
} -constraints bug-takesTooLong

#
# string match
bigtestRO string-match-bigdata-1 {string match} {1 0 1} -body {
    list \
        [string match 0*5 $s] \
        [string match 0*4 $s] \
        [string match $s $s]
} -setup {
    set s [bigString 0x100000000]
} -cleanup {
    bigClean
}

#
# string range
bigtestRO string-range-bigdata-1 "string range" {6 7 5 {} 5 4 {} 9 {}} -body {
    list \
        [string range $s 0x100000000 0x100000000] \
        [string range $s 0x100000000+1 0x100000000+1] \
        [string range $s 0x100000000-1 0x100000000-1] \
        [string range $s 0x10000000a 0x10000000a] \
        [string range $s end end] \
        [string range $s end-1 end-1] \
        [string range $s end+1 end+1] \
        [string range $s end-0x100000000 end-0x100000000] \
        [string range $s end-0x10000000a end-0x10000000a]
} -setup {
    set s [bigString 0x10000000a]
} -cleanup {
    bigClean
}
bigtestRO string-range-bigdata-2 "bug ad9361fd20 case 1" aXaaaa -body {
    string range [string insert [string repeat a 0x80000000] end-0x7fffffff X] 0 5
}
bigtestRO string-range-bigdata-3 "bug ad9361fd20 case 2" 2 -body {
    string length [string range $s end-0x7fffffff end-0x7ffffffe]
} -setup {
    set s [string repeat a 0xffffffff]
} -cleanup {
    bigClean
}
# TODO - add tests for large result range

#
# string repeat - use bigtest, not bigtestRO !!
bigtest string-repeat-bigdata-1 "string repeat single char length > UINT_MAX" 4294967296 -body {
    string length [string repeat x 0x100000000]
}
bigtest string-repeat-bigdata-2 "string repeat multiple char" {4294967296 0123456789abcdef 0123456789abcdef} -body {
    set s [string repeat 0123456789abcdef [expr 0x100000000/16]]
    list \
        [string length $s] \
        [string range $s 0 15] \
        [string range $s end-15 end]
} -cleanup {
    bigClean
}

#
# string replace
bigtestRO string-replace-bigdata-1 "string replace" {789012345 012345678 XYZ789012345 012345678XYZ} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain result
    lappend result [string replace $s 0 0x100000000]
    lappend result [string replace $s end-0x100000000 end]
    lappend result [string replace $s 0 0x100000000 XYZ]
    lappend result [string replace $s end-0x100000000 end XYZ]
} -setup {
    set s [bigString 0x10000000a]
} -cleanup {
    bigClean
}
# TODO -
# - replacements string is large
# - replace in the middle - string length grows, shrinks
# - last < first

#
# string reverse
bigtestRO string-reverse-bigdata-1 "string reverse" {5432109876 9876543210} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain s2 result
    set s2 [string reverse $s]
    list [string range $s2 0 9] [string range $s2 end-9 end]
} -setup {
    set s [bigString 0x10000000a]
} -cleanup {
    bigClean
}

#
# string tolower
bigtestRO string-tolower-bigdata-1 "string tolower" 1 -body {
    string equal [string tolower $s] [string repeat abcd $repts]
} -setup {
    set repts [expr 0x100000010/4]
    set s [string repeat ABCD $repts]
} -cleanup {
    bigClean repts
}
bigtestRO string-tolower-bigdata-2 "string tolower first last" {4294967312 ABCDabcdABCD 4294967312 ABCDabcdABCD 4294967312 ABCDabcdABCD} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain s2 result
    set s2 [string tolower $s 4 7]
    lappend result [string length $s2] [string range $s2 0 11]

    unset s2; #Explicit free to reduce total memory
    set s2 [string tolower $s 0x100000008 0x10000000b]
    lappend result [string length $s2] [string range $s2 0x100000004 end]

    unset s2; #Explicit free to reduce total memory
    set s2 [string tolower $s end-7 end-4]
    lappend result [string length $s2] [string range $s2 0x100000004 end]
} -setup {
    set repts [expr 0x100000010/4]
    set s [string repeat ABCD $repts]
} -cleanup {
    bigClean repts
}

#
# string totitle
bigtestRO string-totitle-bigdata-1 "string totitle first last" {4294967312 aBcDAbcdaBcD 4294967312 aBcDAbcdaBcD 4294967312 aBcDAbcdaBcD} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain s2 result
    set s2 [string totitle $s 4 7]
    lappend result [string length $s2] [string range $s2 0 11]
    unset s2; #Explicit free to reduce total memory
    set s2 [string totitle $s 0x100000008 0x10000000b]
    lappend result [string length $s2] [string range $s2 0x100000004 0x10000000f]
    unset s2; #Explicit free to reduce total memory
    set s2 [string totitle $s end-7 end-4]
    lappend result [string length $s2] [string range $s2 0x100000004 0x10000000f]
} -setup {
    set repts [expr 0x100000010/4]
    set s [string repeat aBcD $repts]
} -cleanup {
    bigClean repts
}

#
# string toupper
bigtestRO string-toupper-bigdata-1 "string toupper" 1 -body {
    string equal [string toupper $s] [string repeat ABCD $repts]
} -setup {
    set repts [expr 0x100000010/4]
    set s [string repeat abcd $repts]
} -cleanup {
    bigClean repts
}
bigtestRO string-toupper-bigdata-2 "string toupper first last" {4294967312 abcdABCDabcd 4294967312 abcdABCDabcd 4294967312 abcdABCDabcd} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain s2 result
    set s2 [string toupper $s 4 7]
    lappend result [string length $s2] [string range $s2 0 11]
    unset s2; #Explicit free to reduce total memory
    set s2 [string toupper $s 0x100000008 0x10000000b]
    lappend result [string length $s2] [string range $s2 0x100000004 0x10000000f]
    unset s2; #Explicit free to reduce total memory
    set s2 [string toupper $s end-7 end-4]
    lappend result [string length $s2] [string range $s2 0x100000004 0x10000000f]
} -setup {
    set repts [expr 0x100000010/4]
    set s [string repeat abcd $repts]
} -cleanup {
    bigClean repts
}

#
# string trim
bigtestRO string-trim-bigdata-1 "string trim" {abcdyxxy yxxyabcd} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain s2
    set s2 [string trim $s xy]
    list [string range $s2 0 7] [string range $s2 end-7 end]
} -setup {
    set repts [expr 0x100000010/8]
    set s [string repeat xyabcdyx $repts]
} -cleanup {
    bigClean
}

#
# string trimleft
bigtestRO string-trimleft-bigdata-1 "string trimleft" {abcdyxxy xyabcdyx} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain s2
    set s2 [string trimleft $s xy]
    list [string range $s2 0 7] [string range $s2 end-7 end]
} -setup {
    set repts [expr 0x100000010/8]
    set s [string repeat xyabcdyx $repts]
} -cleanup {
    bigClean
}

#
# string trimright
bigtestRO string-trimright-bigdata-1 "string trimright" {xyabcdyx yxxyabcd} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain s2
    set s2 [string trimright $s xy]
    list [string range $s2 0 7] [string range $s2 end-7 end]
} -setup {
    set repts [expr 0x100000010/8]
    set s [string repeat xyabcdyx $repts]
} -cleanup {
    bigClean
}

#
# append
bigtestRO append-bigdata-1 "append large to small" 1 -body {
    set s 0123456789
    append s [bigString 0x100000000]
    string equal $s [bigString 0x10000000a]
} -cleanup {
    bigClean
}
bigtest append-bigdata-2 "append small to cross UINT_MAX boundary" 1 -body {
    append s 0123456789
    string equal $s [bigString 4294967300]
} -setup {
    set s [bigString 4294967290]
} -cleanup {
    bigClean
}
bigtest append-bigdata-3 "append small to cross UINT_MAX boundary" 1 -body {
    set s2 ""
    append s2 $s $s $s $s
    string equal $s2 [bigString 4294967320]
} -setup {
    # Make length multiple of 4 AND 10 since the bigString pattern length is 10
    set len [expr 4294967320/4]
    set s [bigString $len]
} -cleanup {
    bigClean
}

#
# format
bigtestRO format-bigdata-1 "format %s" 1 -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain s2
    set s2 [format %s $s]
    string equal $s $s2
} -setup {
    set s [bigString 0x100000000]
} -cleanup {
    bigClean
}
bigtest format-bigdata-2 "format bigstring%s" 1 -body {
    set s [format $s X]
    string equal $s [bigString 0x100000001 0x100000000]
} -setup {
    set s [bigString 0x100000000]
    append s %s
} -cleanup {
    bigClean
}
bigtest format-bigdata-3 "format big width" {4294967300 {    } {   a}} -body {
    set s [format %4294967300s a]
    list [string length $s] [string range $s 0 3] [string range $s end-3 end]
} -cleanup {
    bigClean
}
bigtest format-bigdata-4 "format big negative width" {4294967300 {a   } {    }} -body {
    set s [format %-4294967300s a]
    list [string length $s] [string range $s 0 3] [string range $s end-3 end]
} -cleanup {
    bigClean
}
bigtest format-bigdata-5 "format big * width" {4294967300 {    } {   a}} -body {
    set s [format %*s 4294967300 a]
    list [string length $s] [string range $s 0 3] [string range $s end-3 end]
} -cleanup {
    bigClean
}
bigtest format-bigdata-6 "format big negative * width" {4294967300 {a   } {    }} -body {
    set s [format %*s -4294967300 a]
    list [string length $s] [string range $s 0 3] [string range $s end-3 end]
} -cleanup {
    bigClean
}
bigtestRO format-bigdata-7 "format big precision" {4294967300 0123 6789} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain s2
    set s2 [format %.4294967300s $s]
    list [string length $s2] [string range $s2 0 3] [string range $s2 end-3 end]
} -setup {
    set s [testbigdata string 4294967310]
} -cleanup {
    bigClean
}
bigtestRO format-bigdata-8 "format big * precision" {4294967300 0123 6789} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain s2
    set s2 [format %.*s 4294967300 $s]
    list [string length $s2] [string range $s2 0 3] [string range $s2 end-3 end]
} -setup {
    set s [testbigdata string 4294967310]
} -cleanup {
    bigClean
}

#
# scan
bigtestRO scan-bigdata-1 "scan %s" {1 1 2 X 1 2 4294967300 01234X} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain result digits x
    lappend result [string equal [scan $s %s] $s]
    lappend result [string equal [scan $s {%[0-9X]}] $s]
    lappend result [scan $s {%[0-9]%s} digits x] $x
    lappend result [string equal $digits [bigString 0x100000009]]
    lappend result [scan $s %4294967300s%s x y]
    lappend result [string length $x] $y
} -setup {
    set s [bigString 0x10000000a 0x100000009]
} -cleanup {
    bigClean digits
}

#
# regexp
bigtestRO regexp-bigdata-1 "regexp" 1 -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain result digits
    lappend result [regexp {[[:digit:]]*X} $s]
} -setup {
    set s [bigString 0x100000000 0x100000000]
} -cleanup {
    bigClean digits
}
bigtestRO regexp-bigdata-2 "regexp with capture" 1 -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain result digits match
    lappend result [regexp {([[:digit:]])*X} $s match digits] [string equal $match $s]
    puts B
    unset match; # Free up memory
    lappend result [string equal $digits [bigString 0x100000009]]
} -setup {
    set s [bigString 0x10000000a 0x100000009]
} -cleanup {
    bigClean digits match
} -constraints bug-takesTooLong

#
# regsub
bigtestRO regsub-bigdata-1 "regsub" X -body {
    regsub -all \\d $s {}
} -setup {
    set s [bigString 0x100000001 0x100000000]
} -cleanup {
    bigClean
} -constraints bug-takesTooLong
bigtestRO regsub-bigdata-2 "regsub" 1 -body {
    string equal [regsub -all \\d $s x] [string cat [string repeat x 0x100000000] X]
} -setup {
    set s [bigString 0x100000001 0x100000000]
} -cleanup {
    bigClean
} -constraints bug-takesTooLong

#
# subst
bigtestRO subst-bigdata-1 "subst" {1 1} -body {
    unset -nocomplain result
    lappend result [string equal [subst $s] $s]
    lappend result [string equal [subst {$s}] $s]
} -setup {
    set s [bigString 0x10000000a]
} -cleanup {
    bigClean
}

#
# binary format
bigtestRO binary-format-bigdata-1 "binary format aN" [list 4294967296  X\0\0\0 \0\0\0\0] -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain bin
    set bin [binary format a4294967296 X]
    list [string length $bin] [string range $bin 0 3] [string range $bin end-3 end]
} -cleanup {
    bigClean
}
# TODO - do string compare and add other format specifiers

bigtestRO binary-format-bigdata-2 "binary format a*" 1 -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain bin2
    set bin2 [binary format a* $bin]
    string equal $bin $bin2
} -setup {
    set bin [bigBinary 4294967296]
} -cleanup {
    bigClean
}

#
# binary scan
bigtestRO binary-scan-bigdata-1 "binary scan aN" {4294967296 0123 2345} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain bin2
    binary scan $bin a4294967296 bin2
    list [string length $bin2] [string range $bin2 0 3] [string range $bin2 end-3 end]
} -setup {
    set bin [bigBinary 4294967296]
} -cleanup {
    bigClean
}
# TODO - do string compare and add other format specifiers once above bug is fixed

bigtestRO binary-scan-bigdata-2 "binary scan a*" 1 -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain bin2
    binary scan $bin a* bin2
    string equal $bin $bin2
} -setup {
    set bin [bigBinary 4294967296]
} -cleanup {
    bigClean
}
# TODO - do string compare and add other format specifiers once above bug is fixed

#
# binary encode / decode base64
bigtestRO binary-encode/decode-base64-bigdata-1 "binary encode/decode base64" 1 -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    string equal $bin [binary decode base64 [binary encode base64 $bin]]
} -setup {
    set bin [bigBinary 4294967296]
} -cleanup {
    bigClean
}

#
# binary encode / decode hex
bigtestRO binary-encode/decode-hex-bigdata-1 "binary encode/decode hex" 1 -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    string equal $bin [binary decode hex [binary encode hex $bin]]
} -setup {
    set bin [bigBinary 4294967296]
} -cleanup {
    bigClean
}

#
# binary encode / decode uuencode
bigtestRO binary-encode/decode-uuencode-bigdata-1 "binary encode/decode uuencode" 1 -body {
    string equal $bin [binary decode uuencode [binary encode uuencode $bin]]
} -setup {
    set bin [bigBinary 4294967296]
} -cleanup {
    bigClean
}

################################################################
# List commands

#
# foreach
bigtestRO foreach-bigdata-1 "foreach" 1 -body {
    # Unset explicitly before setting as bigtestRO runs the script twice.
    unset -nocomplain l2
    foreach x $l {
        lappend l2 $x
    }
    testlutil equal $l $l2
} -setup {
    set l [bigList 0x100000000]
} -cleanup {
    bigClean
}

#
# lappend
bigtest lappend-bigdata-1 "lappend" {4294967300 4294967300 {1 2 3 4 5 a b c d}} -body {
    # Do NOT initialize l in a -setup block. That requires more memory and fails.
    # Do not have enough memory for a full compare.
    # Just check end
    set l [bigList 0x100000000]
    list [llength [lappend l a b c d]] [llength $l] [lrange $l end-8 end]
} -cleanup {
    bigClean
}

#
# lassign
bigtestRO lassign-bigdata-1 "lassign" {0 1 2 3 4 5 6 7 8 {9 0 1 2 3 4 5 6 7 8} {6 7 8 9 0 1 2 3 4 5}} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain l2
    set l2 [lassign $l a b c d e f g h i]
    list $a $b $c $d $e $f $g $h $i [lrange $l2 0 9] [lrange $l2 end-9 end]
} -setup {
    set l [bigList 0x10000000a]
} -cleanup {
    bigClean
}

#
# ledit
bigtest ledit-bigdata-1 "ledit - small result" {{0 X Y Z 8} {0 X Y Z 8}} -body {
    list [ledit l 1 0x100000001 X Y Z] $l
} -setup {
    set l [bigList 0x100000003]
} -cleanup {
    bigClean
}

bigtest ledit-bigdata-2 "ledit - large result" {4294967304 4294967304 {a b c d e f g 7}} -body {
    # Do NOT initialize l in a -setup block. That requires more memory and fails.
    set l [bigList 0x100000002]
    list [llength [ledit l 0x100000000 0x100000000 a b c d e f g]] [llength $l] [lrange $l 0x100000000 end]
} -cleanup {
    bigClean
}

bigtest ledit-bigdata-3 "ledit - small -> large result" {2147483650 2147483650 {a b 0 1 2 3 4 5} {0 1 e f g h i j}} -body {
    set l2 {a b c d e f g h i j}
    list [llength [ledit l2 2 3 {*}$l]] [llength $l2] [lrange $l2 0 7] [lrange $l2 end-7 end]
} -setup {
    # Note total number of arguments has to be less than INT_MAX
    set l [bigList 2147483642]
} -cleanup {
    bigClean
} -constraints memory-allocation-panic

#
# lindex
bigtestRO lindex-bigdata-1 "lindex" {6 7 5 {} 5 4 {} 9 {}} -body {
    list \
        [lindex $l 0x100000000] \
        [lindex $l 0x100000000+1] \
        [lindex $l 0x100000000-1] \
        [lindex $l 0x10000000a] \
        [lindex $l end] \
        [lindex $l end-1] \
        [lindex $l end+1] \
        [lindex $l end-0x100000000] \
        [lindex $l end-0x10000000a]
} -setup {
    set l [bigList 0x10000000a]
} -cleanup {
    bigClean
}
# TODO nested index

#
# linsert
# Cannot use bigtestRO here because 16GB memory not enough to have two 4G sized lists
# Have to throw away source list every time. Also means we cannot compare entire lists
# and instead just compare the affected range
bigtest linsert-bigdata-1 "linsert" {4294967330 1} -body {
    # Note insert at multiple of 10 to enable comparison against generated string
    set ins [split abcdefghij ""]
    set pat [split 0123456789 ""]
    set insidx 2000000000
    set l [linsert [bigList 4294967320] $insidx {*}$ins]
    list \
        [llength $l] \
        [testlutil equal [lrange $l $insidx-10 $insidx+19] [concat $pat $ins $pat]]
} -cleanup {
    bigClean
}

#
# list and {*}
# TODO - compiled and uncompiled behave differently so tested separately
test list-bigdata-1.compiled {list {*}}  -body {
    set l [bigList 0x100000000]
    set l2 [list {*}$l]
    unset l
    list [llength $l2] [lindex $l2 0] [lindex $l2 end]
} -cleanup {
    bigClean
} -constraints {
    bigdata
} -result {4294967296 0 5}
test list-bigdata-1.uncompiled {list {*}}  -body {
    set l [bigList 0x7fffffff]
    testevalex {set l2 [list {*}$l]}
} -cleanup {
    bigClean
} -constraints {
    bigdata
} -result {Number of words in command exceeds limit 2147483647.} -returnCodes error

#
# llength
bigtestRO llength-bigdata-1 {llength} 4294967296 -body {
    llength $l
} -setup {
    set l [bigList 0x100000000]
} -cleanup {
    bigClean
}

#
# lmap
bigtestRO lmap-bigdata-1 "lmap" 4294967296 -body {
    set n 0
    if {0} {
        # TODO - This is the right test but runs out of memory
        testlutil equal $l [lmap e $l {set e}]
    } else {
        lmap e $l {incr n; continue}
    }
    set n
} -setup {
    set l [bigList 0x100000000]
} -cleanup {
    bigClean
    puts ""
}

#
# lrange
bigtestRO lrange-bigdata-1 "lrange" {6 {6 7} 7 5 {} 5 4 {} 9 {8 9} {}} -body {
    list \
        [lrange $l 0x100000000 0x100000000] \
        [lrange $l 0x100000000 0x100000001] \
        [lrange $l 0x100000000+1 0x100000000+1] \
        [lrange $l 0x100000000-1 0x100000000-1] \
        [lrange $l 0x10000000a 0x10000000a] \
        [lrange $l end end] \
        [lrange $l end-1 end-1] \
        [lrange $l end+1 end+1] \
        [lrange $l end-0x100000000 end-0x100000000] \
        [lrange $l end-0x100000001 end-0x100000000] \
        [lrange $l end-0x10000000a end-0x10000000a]
} -setup {
    set l [bigList 0x10000000a]
} -cleanup {
    bigClean
}
# TODO - add tests for large result range

#
# lrepeat - use bigtest, not bigtestRO !!
bigtest lrepeat-bigdata-1 "lrepeat single element length > UINT_MAX" 4294967296 -body {
    # Just to test long lengths are accepted as arguments
    llength [lrepeat 0x100000000 x]
}

bigtest lrepeat-bigdata-2 "string repeat multiple char" {4294967400 {0 1 2 3 4 5 6 7}} -body {
    set len [expr 4294967400/8]
    set l [lrepeat $len 0 1 2 3 4 5 6 7]
    list [llength $l] [lrange $l end-7 end]
} -cleanup {
    bigClean
}

#
# lreplace
bigtestRO lreplace-bigdata-1 "lreplace - small result" [list \
                                             [split 789012345 ""] \
                                             [split 012345678 ""] \
                                             [split XYZ789012345 ""] \
                                             [split 012345678XYZ ""] \
                                            ] -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain result
    lappend result [lreplace $l 0 0x100000000]
    lappend result [lreplace $l end-0x100000000 end]
    lappend result [lreplace $l 0 0x100000000 X Y Z]
    lappend result [lreplace $l end-0x100000000 end X Y Z]
} -setup {
    set l [bigList 0x10000000a]
} -cleanup {
    bigClean
}

bigtest lreplace-bigdata-2 "lreplace - large result" {4294967301 {a b c d e 0 1 2 3 4 5 6}} -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain l2
    set l2 [lreplace [bigList 4294967296] 4294967290 0 a b c d e]
    lrange $l2 4294967290 end
} -setup {
    #set l [bigList 4294967296]
} -cleanup {
    bigClean
} -constraints bug-outofmemorypanic

#
# lsearch
bigtestRO lsearch-bigdata-1 "lsearch" {4294967300 4294967310 -1}  -body {
    list \
        [lsearch -exact $l X] \
        [lsearch -exact -start 4294967291 $l 0] \
        [lsearch -exact $l Y]
} -setup {
    set l [bigList 0x100000010 4294967300]
} -cleanup {
    bigClean
}
# TODO - stride, inline, all

#
# lseq
bigtest lseq-bigdata-1 "lseq" {4294967297 4294967296} -body {
    list [llength $l] [lindex $l 0x100000000]
} -setup {
    set l [lseq 0x100000001]
} -cleanup {
    bigClean
}
bigtest lseq-bigdata-2 "lseq" {9223372036854775807 9223372036854775799} -body {
    list [llength $l] [lindex $l 9223372036854775800]
} -setup {
    set l [lseq 0x7fffffffffffffff]; llength $l
} -cleanup {
    bigClean
} -constraints bug-fa00fbbbab

#
# lset
bigtest lset-bigdata-1 "lset" {4294967297 4294967297 {1 2 3 4 5 X}} -body {
    # Do NOT initialize l in a -setup block. That requires more memory and fails.
    set l [bigList 0x100000001]
    list [llength [lset l 0x100000000 X]] [llength $l] [lrange $l end-5 end]
} -cleanup {
    bigClean
}

#
# lsort
bigtestRO lsort-bigdata-1 "lsort" [list 4294967296 [lrepeat 10 0] [lrepeat 10 9]] -body {
    # Unset explicitly before setting to save memory as bigtestRO runs the
    # script below twice.
    unset -nocomplain l2
    set l2 [lsort $l]
    list [llength $l2] [lrange $l2 0 9] [lrange $l2 end-9 end]
} -setup {
    set l [bigList 0x100000000]
} -cleanup {
    bigClean
} -constraints notenoughmemoryexception

#
# join
bigtestRO join-bigdata-1 "join" [list 0123456789 6789012345] -body {
    set s [join $l ""]
    list [string range $s 0 9] [string range $s end-9 end]
} -setup {
    set l [bigList 0x100000000]
} -cleanup {
    bigClean
}

bigtest split-bigdata-1 "split" {4294967296 {0 1 2 3 4} {1 2 3 4 5}} -body {
    # Fill list compare needs too much memory
    set l [split $s ""]
    list [llength $l] [lrange 0 4] [lrange end-4 end]
} -setup {
    set s [bigString 0x100000000]
} -cleanup {
    bigClean
} -constraints bug-takesTooLong

bigtestRO concat-bigdata-1 "concat" {4294967296 {0 1 2 3 4} {6 7 0 1 2} {3 4 5 6 7}} -body {
    unset -nocomplain l2
    set l2 [concat $l $l]
    list [llength $l2] [lrange $l2 0 4] [lrange $l2 0x80000000-2 0x80000000+2] [lrange $l2 end-4 end]
} -setup {
    set l [bigList 0x80000000]
}

test puts-bigdata-1 "puts" -setup {
    set fpath [makeFile {} bug-0306a5563.data]
} -constraints {
    bigdata
} -body {
    set fd [open $fpath w]
    puts -nonewline $fd [testbigdata string 0x80000001]
    close $fd
    set fd [open $fpath]
    seek $fd 0x7FFFFFFA
    set written [read $fd]
    close $fd
    set written
} -result {2345678}

test puts-bigdata-2 "puts" -setup {
    set fpath [tcltest::makeFile {} bug-0306a5563.data]
} -constraints {
    bigdata
} -body {
    set fd [open $fpath w]
    set s [testbigdata string 0x7FFFFFFE]
    # The character to append in the next line is —, EM DASH,
    # code point 0x2014 (decimal 8212, UTF-8 #xE2 #x80 #x94)
    append s \u2014
    puts -nonewline $fd $s
    close $fd
    set fd [open $fpath]
    seek $fd 0x7FFFFFFA
    set written [read $fd]
    close $fd
    set written
} -result {2345—}

test source-bigdata-1 "source" -setup {
    # This test crashes because the frame linenumber tracking
    # wraps around at INT_MAX
    set fpath [tcltest::makeFile {} source-bigdata-1.tcl]
    set fd [open $fpath w]
    fconfigure $fd -translation lf
    puts -nonewline $fd [string repeat \n 4294967296]
    puts $fd {dict get [info frame 0] line}
    close $fd
} -constraints {
    bigdata knownBug
} -body {
    set line [source $fpath]
} -result 4294967297

#
# TODO
# lremove
# lreverse
# encoding convertfrom
# encoding convertto
# dict *



# cleanup
::tcltest::cleanupTests
return

# Local Variables:
# mode: tcl
# fill-column: 78
# End: