# Commands tested in this file: socket. # # This file contains a collection of tests for one or more of the Tcl # built-in commands. Sourcing this file into Tcl runs the tests and # generates output for errors. No output means no errors were found. # # Copyright (c) 1994-1996 Sun Microsystems, Inc. # Copyright (c) 1998-2000 Ajuba Solutions. # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. # # RCS: @(#) $Id: socket.test,v 1.17 2001/09/11 17:30:44 andreas_kupries Exp $ # Running socket tests with a remote server: # ------------------------------------------ # # Some tests in socket.test depend on the existence of a remote server to # which they connect. The remote server must be an instance of tcltest and it # must run the script found in the file "remote.tcl" in this directory. You # can start the remote server on any machine reachable from the machine on # which you want to run the socket tests, by issuing: # # tcltest remote.tcl -port 2048 # Or choose another port number. # # If the machine you are running the remote server on has several IP # interfaces, you can choose which interface the server listens on for # connections by specifying the -address command line flag, so: # # tcltest remote.tcl -address your.machine.com # # These options can also be set by environment variables. On Unix, you can # type these commands to the shell from which the remote server is started: # # shell% setenv serverPort 2048 # shell% setenv serverAddress your.machine.com # # and subsequently you can start the remote server with: # # tcltest remote.tcl # # to have it listen on port 2048 on the interface your.machine.com. # # When the server starts, it prints out a detailed message containing its # configuration information, and it will block until killed with a Ctrl-C. # Once the remote server exists, you can run the tests in socket.test with # the server by setting two Tcl variables: # # % set remoteServerIP # % set remoteServerPort 2048 # # These variables are also settable from the environment. On Unix, you can: # # shell% setenv remoteServerIP machine.where.server.runs # shell% senetv remoteServerPort 2048 # # The preamble of the socket.test file checks to see if the variables are set # either in Tcl or in the environment; if they are, it attempts to connect to # the server. If the connection is successful, the tests using the remote # server will be performed; otherwise, it will attempt to start the remote # server (via exec) on platforms that support this, on the local host, # listening at port 2048. If all fails, a message is printed and the tests # using the remote server are not performed. if {[lsearch [namespace children] ::tcltest] == -1} { package require tcltest namespace import -force ::tcltest::* } # Some tests require the testthread and exec commands set ::tcltest::testConstraints(testthread) \ [expr {[info commands testthread] != {}}] set ::tcltest::testConstraints(exec) [expr {[info commands exec] != {}}] # # If remoteServerIP or remoteServerPort are not set, check in the # environment variables for externally set values. # if {![info exists remoteServerIP]} { if {[info exists env(remoteServerIP)]} { set remoteServerIP $env(remoteServerIP) } } if {![info exists remoteServerPort]} { if {[info exists env(remoteServerIP)]} { set remoteServerPort $env(remoteServerPort) } else { if {[info exists remoteServerIP]} { set remoteServerPort 2048 } } } # # Check if we're supposed to do tests against the remote server # set doTestsWithRemoteServer 1 if {![info exists remoteServerIP] && ($tcl_platform(platform) != "macintosh")} { set remoteServerIP 127.0.0.1 } if {($doTestsWithRemoteServer == 1) && (![info exists remoteServerPort])} { set remoteServerPort 2048 } # Attempt to connect to a remote server if one is already running. If it # is not running or for some other reason the connect fails, attempt to # start the remote server on the local host listening on port 2048. This # is only done on platforms that support exec (i.e. not on the Mac). On # platforms that do not support exec, the remote server must be started # by the user before running the tests. set remoteProcChan "" set commandSocket "" if {$doTestsWithRemoteServer} { catch {close $commandSocket} if {[catch {set commandSocket [socket $remoteServerIP \ $remoteServerPort]}] != 0} { if {[info commands exec] == ""} { set noRemoteTestReason "can't exec" set doTestsWithRemoteServer 0 } else { set remoteServerIP 127.0.0.1 set remoteFile [file join [pwd] remote.tcl] if {[catch {set remoteProcChan \ [open "|[list $::tcltest::tcltest $remoteFile \ -serverIsSilent \ -port $remoteServerPort \ -address $remoteServerIP]" \ w+]} \ msg] == 0} { after 1000 if {[catch {set commandSocket [socket $remoteServerIP \ $remoteServerPort]} msg] == 0} { fconfigure $commandSocket -translation crlf -buffering line } else { set noRemoteTestReason $msg set doTestsWithRemoteServer 0 } } else { set noRemoteTestReason "$msg $::tcltest::tcltest" set doTestsWithRemoteServer 0 } } } else { fconfigure $commandSocket -translation crlf -buffering line } } # Some tests are run only if we are doing testing against a remote server. set ::tcltest::testConstraints(doTestsWithRemoteServer) $doTestsWithRemoteServer if {$doTestsWithRemoteServer == 0} { if {[string first s $::tcltest::verbose] != -1} { puts "Skipping tests with remote server. See tests/socket.test for" puts "information on how to run remote server." puts "Reason for not doing remote tests: $noRemoteTestReason" } } # # If we do the tests, define a command to send a command to the # remote server. # if {$doTestsWithRemoteServer == 1} { proc sendCommand {c} { global commandSocket if {[eof $commandSocket]} { error "remote server disappeared" } if {[catch {puts $commandSocket $c} msg]} { error "remote server disappaered: $msg" } if {[catch {puts $commandSocket "--Marker--Marker--Marker--"} msg]} { error "remote server disappeared: $msg" } set resp "" while {1} { set line [gets $commandSocket] if {[eof $commandSocket]} { error "remote server disappaered" } if {[string compare $line "--Marker--Marker--Marker--"] == 0} { if {[string compare [lindex $resp 0] error] == 0} { error [lindex $resp 1] } else { return [lindex $resp 1] } } else { append resp $line "\n" } } } } test socket-1.1 {arg parsing for socket command} {socket} { list [catch {socket -server} msg] $msg } {1 {no argument given for -server option}} test socket-1.2 {arg parsing for socket command} {socket} { list [catch {socket -server foo} msg] $msg } {1 {wrong # args: should be either: socket ?-myaddr addr? ?-myport myport? ?-async? host port socket -server command ?-myaddr addr? port}} test socket-1.3 {arg parsing for socket command} {socket} { list [catch {socket -myaddr} msg] $msg } {1 {no argument given for -myaddr option}} test socket-1.4 {arg parsing for socket command} {socket} { list [catch {socket -myaddr 127.0.0.1} msg] $msg } {1 {wrong # args: should be either: socket ?-myaddr addr? ?-myport myport? ?-async? host port socket -server command ?-myaddr addr? port}} test socket-1.5 {arg parsing for socket command} {socket} { list [catch {socket -myport} msg] $msg } {1 {no argument given for -myport option}} test socket-1.6 {arg parsing for socket command} {socket} { list [catch {socket -myport xxxx} msg] $msg } {1 {expected integer but got "xxxx"}} test socket-1.7 {arg parsing for socket command} {socket} { list [catch {socket -myport 2522} msg] $msg } {1 {wrong # args: should be either: socket ?-myaddr addr? ?-myport myport? ?-async? host port socket -server command ?-myaddr addr? port}} test socket-1.8 {arg parsing for socket command} {socket} { list [catch {socket -froboz} msg] $msg } {1 {bad option "-froboz": must be -async, -myaddr, -myport, or -server}} test socket-1.9 {arg parsing for socket command} {socket} { list [catch {socket -server foo -myport 2521 3333} msg] $msg } {1 {Option -myport is not valid for servers}} test socket-1.10 {arg parsing for socket command} {socket} { list [catch {socket host 2528 -junk} msg] $msg } {1 {wrong # args: should be either: socket ?-myaddr addr? ?-myport myport? ?-async? host port socket -server command ?-myaddr addr? port}} test socket-1.11 {arg parsing for socket command} {socket} { list [catch {socket -server callback 2520 --} msg] $msg } {1 {wrong # args: should be either: socket ?-myaddr addr? ?-myport myport? ?-async? host port socket -server command ?-myaddr addr? port}} test socket-1.12 {arg parsing for socket command} {socket} { list [catch {socket foo badport} msg] $msg } {1 {expected integer but got "badport"}} test socket-2.1 {tcp connection} {socket stdio} { removeFile script set f [open script w] puts $f { set timer [after 2000 "set x timed_out"] set f [socket -server accept 0] proc accept {file addr port} { global x set x done close $file } puts ready puts [lindex [fconfigure $f -sockname] 2] vwait x after cancel $timer close $f puts $x } close $f set f [open "|[list $::tcltest::tcltest script]" r] gets $f x gets $f listen if {[catch {socket 127.0.0.1 $listen} msg]} { set x $msg } else { lappend x [gets $f] close $msg } lappend x [gets $f] close $f set x } {ready done {}} if [info exists port] { incr port } else { set port [expr 2048 + [pid]%1024] } test socket-2.2 {tcp connection with client port specified} {socket stdio} { removeFile script set f [open script w] puts $f { set timer [after 2000 "set x done"] set f [socket -server accept 0] proc accept {file addr port} { global x puts "[gets $file] $port" close $file set x done } puts ready puts [lindex [fconfigure $f -sockname] 2] vwait x after cancel $timer close $f } close $f set f [open "|[list $::tcltest::tcltest script]" r] gets $f x gets $f listen global port if {[catch {socket -myport $port 127.0.0.1 $listen} sock]} { set x $sock close [socket 127.0.0.1 $listen] puts stderr $sock } else { puts $sock hello flush $sock lappend x [gets $f] close $sock } close $f set x } [list ready "hello $port"] test socket-2.3 {tcp connection with client interface specified} {socket stdio} { removeFile script set f [open script w] puts $f { set timer [after 2000 "set x done"] set f [socket -server accept 2830] proc accept {file addr port} { global x puts "[gets $file] $addr" close $file set x done } puts ready vwait x after cancel $timer close $f } close $f set f [open "|[list $::tcltest::tcltest script]" r] gets $f x if {[catch {socket -myaddr 127.0.0.1 127.0.0.1 2830} sock]} { set x $sock } else { puts $sock hello flush $sock lappend x [gets $f] close $sock } close $f set x } {ready {hello 127.0.0.1}} test socket-2.4 {tcp connection with server interface specified} {socket stdio} { removeFile script set f [open script w] puts $f { set timer [after 2000 "set x done"] set f [socket -server accept -myaddr [info hostname] 0] proc accept {file addr port} { global x puts "[gets $file]" close $file set x done } puts ready puts [lindex [fconfigure $f -sockname] 2] vwait x after cancel $timer close $f } close $f set f [open "|[list $::tcltest::tcltest script]" r] gets $f x gets $f listen if {[catch {socket [info hostname] $listen} sock]} { set x $sock } else { puts $sock hello flush $sock lappend x [gets $f] close $sock } close $f set x } {ready hello} test socket-2.5 {tcp connection with redundant server port} {socket stdio} { removeFile script set f [open script w] puts $f { set timer [after 2000 "set x done"] set f [socket -server accept 0] proc accept {file addr port} { global x puts "[gets $file]" close $file set x done } puts ready puts [lindex [fconfigure $f -sockname] 2] vwait x after cancel $timer close $f } close $f set f [open "|[list $::tcltest::tcltest script]" r] gets $f x gets $f listen if {[catch {socket 127.0.0.1 $listen} sock]} { set x $sock } else { puts $sock hello flush $sock lappend x [gets $f] close $sock } close $f set x } {ready hello} test socket-2.6 {tcp connection} {socket} { set status ok if {![catch {set sock [socket 127.0.0.1 2833]}]} { if {![catch {gets $sock}]} { set status broken } close $sock } set status } ok test socket-2.7 {echo server, one line} {socket stdio} { removeFile script set f [open script w] puts $f { set timer [after 2000 "set x done"] set f [socket -server accept 0] proc accept {s a p} { fileevent $s readable [list echo $s] fconfigure $s -translation lf -buffering line } proc echo {s} { set l [gets $s] if {[eof $s]} { global x close $s set x done } else { puts $s $l } } puts ready puts [lindex [fconfigure $f -sockname] 2] vwait x after cancel $timer close $f puts done } close $f set f [open "|[list $::tcltest::tcltest script]" r] gets $f gets $f listen set s [socket 127.0.0.1 $listen] fconfigure $s -buffering line -translation lf puts $s "hello abcdefghijklmnop" after 1000 set x [gets $s] close $s set y [gets $f] close $f list $x $y } {{hello abcdefghijklmnop} done} test socket-2.8 {echo server, loop 50 times, single connection} {socket stdio} { makeFile { set f [socket -server accept 0] proc accept {s a p} { fileevent $s readable [list echo $s] fconfigure $s -buffering line } proc echo {s} { global i set l [gets $s] if {[eof $s]} { global x close $s set x done } else { incr i puts $s $l } } set i 0 puts ready puts [lindex [fconfigure $f -sockname] 2] set timer [after 20000 "set x done"] vwait x after cancel $timer close $f puts "done $i" } script set f [open "|[list $::tcltest::tcltest script]" r] gets $f gets $f listen set s [socket 127.0.0.1 $listen] fconfigure $s -buffering line catch { for {set x 0} {$x < 50} {incr x} { puts $s "hello abcdefghijklmnop" gets $s } } close $s catch {set x [gets $f]} close $f set x } {done 50} test socket-2.9 {socket conflict} {socket stdio} { set s [socket -server accept 0] removeFile script set f [open script w] puts -nonewline $f "socket -server accept [lindex [fconfigure $s -sockname] 2]" close $f set f [open "|[list $::tcltest::tcltest script]" r] gets $f after 100 set x [list [catch {close $f} msg]] regsub "\n.*$" $msg {} msg ; # cut part of the error message containing the port number lappend x $msg close $s set x } {1 {couldn't open socket: address already in use}} test socket-2.10 {close on accept, accepted socket lives} {socket} { set done 0 set timer [after 20000 "set done timed_out"] set ss [socket -server accept 0] proc accept {s a p} { global ss close $ss fileevent $s readable "readit $s" fconfigure $s -trans lf } proc readit {s} { global done gets $s close $s set done 1 } set cs [socket [info hostname] [lindex [fconfigure $ss -sockname] 2]] puts $cs hello close $cs vwait done after cancel $timer set done } 1 test socket-2.11 {detecting new data} {socket} { proc accept {s a p} { global sock set sock $s } set s [socket -server accept 0] set sock "" set s2 [socket 127.0.0.1 [lindex [fconfigure $s -sockname] 2]] vwait sock puts $s2 one flush $s2 after 500 fconfigure $sock -blocking 0 set result a:[gets $sock] lappend result b:[gets $sock] fconfigure $sock -blocking 1 puts $s2 two flush $s2 fconfigure $sock -blocking 0 lappend result c:[gets $sock] fconfigure $sock -blocking 1 close $s2 close $s close $sock set result } {a:one b: c:two} test socket-3.1 {socket conflict} {socket stdio} { removeFile script set f [open script w] puts $f { set f [socket -server accept 0] puts ready puts [lindex [fconfigure $f -sockname] 2] gets stdin close $f } close $f set f [open "|[list $::tcltest::tcltest script]" r+] gets $f gets $f listen set x [list [catch {socket -server accept $listen} msg] \ $msg] puts $f bye close $f set x } {1 {couldn't open socket: address already in use}} test socket-3.2 {server with several clients} {socket stdio} { removeFile script set f [open script w] puts $f { set t1 [after 30000 "set x timed_out"] set t2 [after 31000 "set x timed_out"] set t3 [after 32000 "set x timed_out"] set counter 0 set s [socket -server accept 0] proc accept {s a p} { fileevent $s readable [list echo $s] fconfigure $s -buffering line } proc echo {s} { global x set l [gets $s] if {[eof $s]} { close $s set x done } else { puts $s $l } } puts ready puts [lindex [fconfigure $s -sockname] 2] vwait x after cancel $t1 vwait x after cancel $t2 vwait x after cancel $t3 close $s puts $x } close $f set f [open "|[list $::tcltest::tcltest script]" r+] set x [gets $f] gets $f listen set s1 [socket 127.0.0.1 $listen] fconfigure $s1 -buffering line set s2 [socket 127.0.0.1 $listen] fconfigure $s2 -buffering line set s3 [socket 127.0.0.1 $listen] fconfigure $s3 -buffering line for {set i 0} {$i < 100} {incr i} { puts $s1 hello,s1 gets $s1 puts $s2 hello,s2 gets $s2 puts $s3 hello,s3 gets $s3 } close $s1 close $s2 close $s3 lappend x [gets $f] close $f set x } {ready done} test socket-4.1 {server with several clients} {socket stdio} { removeFile script set f [open script w] puts $f { set port [gets stdin] set s [socket 127.0.0.1 $port] fconfigure $s -buffering line for {set i 0} {$i < 100} {incr i} { puts $s hello gets $s } close $s puts bye gets stdin } close $f set p1 [open "|[list $::tcltest::tcltest script]" r+] fconfigure $p1 -buffering line set p2 [open "|[list $::tcltest::tcltest script]" r+] fconfigure $p2 -buffering line set p3 [open "|[list $::tcltest::tcltest script]" r+] fconfigure $p3 -buffering line proc accept {s a p} { fconfigure $s -buffering line fileevent $s readable [list echo $s] } proc echo {s} { global x set l [gets $s] if {[eof $s]} { close $s set x done } else { puts $s $l } } set t1 [after 30000 "set x timed_out"] set t2 [after 31000 "set x timed_out"] set t3 [after 32000 "set x timed_out"] set s [socket -server accept 0] set listen [lindex [fconfigure $s -sockname] 2] puts $p1 $listen puts $p2 $listen puts $p3 $listen vwait x vwait x vwait x after cancel $t1 after cancel $t2 after cancel $t3 close $s set l "" lappend l [list p1 [gets $p1] $x] lappend l [list p2 [gets $p2] $x] lappend l [list p3 [gets $p3] $x] puts $p1 bye puts $p2 bye puts $p3 bye close $p1 close $p2 close $p3 set l } {{p1 bye done} {p2 bye done} {p3 bye done}} test socket-4.2 {byte order problems, socket numbers, htons} {socket} { set x ok if {[catch {socket -server dodo 0x3000} msg]} { set x $msg } else { close $msg } set x } ok test socket-5.1 {byte order problems, socket numbers, htons} \ {socket unixOnly notRoot} { set x {couldn't open socket: not owner} if {![catch {socket -server dodo 0x1} msg]} { set x {htons problem, should be disallowed, are you running as SU?} close $msg } set x } {couldn't open socket: not owner} test socket-5.2 {byte order problems, socket numbers, htons} {socket} { set x {couldn't open socket: port number too high} if {![catch {socket -server dodo 0x10000} msg]} { set x {port resolution problem, should be disallowed} close $msg } set x } {couldn't open socket: port number too high} test socket-5.3 {byte order problems, socket numbers, htons} \ {socket unixOnly notRoot} { set x {couldn't open socket: not owner} if {![catch {socket -server dodo 21} msg]} { set x {htons problem, should be disallowed, are you running as SU?} close $msg } set x } {couldn't open socket: not owner} test socket-6.1 {accept callback error} {socket stdio} { removeFile script set f [open script w] puts $f { gets stdin port socket 127.0.0.1 $port } close $f set f [open "|[list $::tcltest::tcltest script]" r+] proc bgerror args { global x set x $args } proc accept {s a p} {expr 10 / 0} set s [socket -server accept 0] puts $f [lindex [fconfigure $s -sockname] 2] close $f set timer [after 10000 "set x timed_out"] vwait x after cancel $timer close $s rename bgerror {} set x } {{divide by zero}} test socket-7.1 {testing socket specific options} {socket stdio} { removeFile script set f [open script w] puts $f { set ss [socket -server accept 0] proc accept args { global x set x done } puts ready puts [lindex [fconfigure $ss -sockname] 2] set timer [after 10000 "set x timed_out"] vwait x after cancel $timer } close $f set f [open "|[list $::tcltest::tcltest script]" r] gets $f gets $f listen set s [socket 127.0.0.1 $listen] set p [fconfigure $s -peername] close $s close $f set l "" lappend l [string compare [lindex $p 0] 127.0.0.1] lappend l [string compare [lindex $p 2] $listen] lappend l [llength $p] } {0 0 3} test socket-7.2 {testing socket specific options} {socket stdio} { removeFile script set f [open script w] puts $f { set ss [socket -server accept 2821] proc accept args { global x set x done } puts ready puts [lindex [fconfigure $ss -sockname] 2] set timer [after 10000 "set x timed_out"] vwait x after cancel $timer } close $f set f [open "|[list $::tcltest::tcltest script]" r] gets $f gets $f listen set s [socket 127.0.0.1 $listen] set p [fconfigure $s -sockname] close $s close $f set l "" lappend l [llength $p] lappend l [lindex $p 0] lappend l [expr [lindex $p 2] == $listen] } {3 127.0.0.1 0} test socket-7.3 {testing socket specific options} {socket} { set s [socket -server accept 0] set l [fconfigure $s] close $s update llength $l } 12 test socket-7.4 {testing socket specific options} {socket} { set s [socket -server accept 0] proc accept {s a p} { global x set x [fconfigure $s -sockname] close $s } set listen [lindex [fconfigure $s -sockname] 2] set s1 [socket [info hostname] $listen] set timer [after 10000 "set x timed_out"] vwait x after cancel $timer close $s close $s1 set l "" lappend l [expr {[lindex $x 2] == $listen}] [llength $x] } {1 3} test socket-7.5 {testing socket specific options} {socket unixOrPc} { set s [socket -server accept 0] proc accept {s a p} { global x set x [fconfigure $s -sockname] close $s } set listen [lindex [fconfigure $s -sockname] 2] set s1 [socket 127.0.0.1 $listen] set timer [after 10000 "set x timed_out"] vwait x after cancel $timer close $s close $s1 set l "" lappend l [lindex $x 0] [expr {[lindex $x 2] == $listen}] [llength $x] } {127.0.0.1 1 3} test socket-8.1 {testing -async flag on sockets} {socket} { # NOTE: This test may fail on some Solaris 2.4 systems. If it does, # check that you have these patches installed (using showrev -p): # # 101907-05, 101925-02, 101945-14, 101959-03, 101969-05, 101973-03, # 101977-03, 101981-02, 101985-01, 102001-03, 102003-01, 102007-01, # 102011-02, 102024-01, 102039-01, 102044-01, 102048-01, 102062-03, # 102066-04, 102070-01, 102105-01, 102153-03, 102216-01, 102232-01, # 101878-03, 101879-01, 101880-03, 101933-01, 101950-01, 102030-01, # 102057-08, 102140-01, 101920-02, 101921-09, 101922-07, 101923-03 # # If after installing these patches you are still experiencing a # problem, please email jyl@eng.sun.com. We have not observed this # failure on Solaris 2.5, so another option (instead of installing # these patches) is to upgrade to Solaris 2.5. set s [socket -server accept 0] proc accept {s a p} { global x puts $s bye close $s set x done } set s1 [socket -async [info hostname] [lindex [fconfigure $s -sockname] 2]] vwait x set z [gets $s1] close $s close $s1 set z } bye test socket-9.1 {testing spurious events} {socket} { set len 0 set spurious 0 set done 0 proc readlittle {s} { global spurious done len set l [read $s 1] if {[string length $l] == 0} { if {![eof $s]} { incr spurious } else { close $s set done 1 } } else { incr len [string length $l] } } proc accept {s a p} { fconfigure $s -buffering none -blocking off fileevent $s readable [list readlittle $s] } set s [socket -server accept 0] set c [socket [info hostname] [lindex [fconfigure $s -sockname] 2]] puts -nonewline $c 01234567890123456789012345678901234567890123456789 close $c set timer [after 10000 "set done timed_out"] vwait done after cancel $timer close $s list $spurious $len } {0 50} test socket-9.2 {testing async write, fileevents, flush on close} {socket} { set firstblock "" for {set i 0} {$i < 5} {incr i} {set firstblock "a$firstblock$firstblock"} set secondblock "" for {set i 0} {$i < 16} {incr i} { set secondblock "b$secondblock$secondblock" } set l [socket -server accept 0] proc accept {s a p} { fconfigure $s -blocking 0 -translation lf -buffersize 16384 \ -buffering line fileevent $s readable "readable $s" } proc readable {s} { set l [gets $s] fileevent $s readable {} after 1000 respond $s } proc respond {s} { global firstblock puts -nonewline $s $firstblock after 1000 writedata $s } proc writedata {s} { global secondblock puts -nonewline $s $secondblock close $s } set s [socket [info hostname] [lindex [fconfigure $l -sockname] 2]] fconfigure $s -blocking 0 -trans lf -buffering line set count 0 puts $s hello proc readit {s} { global count done set l [read $s] incr count [string length $l] if {[eof $s]} { close $s set done 1 } } fileevent $s readable "readit $s" set timer [after 10000 "set done timed_out"] vwait done after cancel $timer close $l set count } 65566 test socket-9.3 {testing EOF stickyness} {socket} { proc count_to_eof {s} { global count done timer set l [gets $s] if {[eof $s]} { incr count if {$count > 9} { close $s set done true set count {eof is sticky} after cancel $timer } } } proc timerproc {} { global done count c set done true set count {timer went off, eof is not sticky} close $c } set count 0 set done false proc write_then_close {s} { puts $s bye close $s } proc accept {s a p} { fconfigure $s -buffering line -translation lf fileevent $s writable "write_then_close $s" } set s [socket -server accept 0] set c [socket [info hostname] [lindex [fconfigure $s -sockname] 2]] fconfigure $c -blocking off -buffering line -translation lf fileevent $c readable "count_to_eof $c" set timer [after 1000 timerproc] vwait done close $s set count } {eof is sticky} removeFile script test socket-10.1 {testing socket accept callback error handling} {socket} { set goterror 0 proc bgerror args {global goterror; set goterror 1} set s [socket -server accept 0] proc accept {s a p} {close $s; error} set c [socket 127.0.0.1 [lindex [fconfigure $s -sockname] 2]] vwait goterror close $s close $c set goterror } 1 test socket-11.1 {tcp connection} {socket doTestsWithRemoteServer} { sendCommand { set socket9_1_test_server [socket -server accept 2834] proc accept {s a p} { puts $s done close $s } } set s [socket $remoteServerIP 2834] set r [gets $s] close $s sendCommand {close $socket9_1_test_server} set r } done test socket-11.2 {client specifies its port} {socket doTestsWithRemoteServer} { if {[info exists port]} { incr port } else { set port [expr 2048 + [pid]%1024] } sendCommand { set socket9_2_test_server [socket -server accept 2835] proc accept {s a p} { puts $s $p close $s } } set s [socket -myport $port $remoteServerIP 2835] set r [gets $s] close $s sendCommand {close $socket9_2_test_server} if {$r == $port} { set result ok } else { set result broken } set result } ok test socket-11.3 {trying to connect, no server} {socket doTestsWithRemoteServer} { set status ok if {![catch {set s [socket $remoteServerIp 2836]}]} { if {![catch {gets $s}]} { set status broken } close $s } set status } ok test socket-11.4 {remote echo, one line} {socket doTestsWithRemoteServer} { sendCommand { set socket10_6_test_server [socket -server accept 2836] proc accept {s a p} { fileevent $s readable [list echo $s] fconfigure $s -buffering line -translation crlf } proc echo {s} { set l [gets $s] if {[eof $s]} { close $s } else { puts $s $l } } } set f [socket $remoteServerIP 2836] fconfigure $f -translation crlf -buffering line puts $f hello set r [gets $f] close $f sendCommand {close $socket10_6_test_server} set r } hello test socket-11.5 {remote echo, 50 lines} {socket doTestsWithRemoteServer} { sendCommand { set socket10_7_test_server [socket -server accept 2836] proc accept {s a p} { fileevent $s readable [list echo $s] fconfigure $s -buffering line -translation crlf } proc echo {s} { set l [gets $s] if {[eof $s]} { close $s } else { puts $s $l } } } set f [socket $remoteServerIP 2836] fconfigure $f -translation crlf -buffering line for {set cnt 0} {$cnt < 50} {incr cnt} { puts $f "hello, $cnt" if {[string compare [gets $f] "hello, $cnt"] != 0} { break } } close $f sendCommand {close $socket10_7_test_server} set cnt } 50 # Macintosh sockets can have more than one server per port if {$tcl_platform(platform) == "macintosh"} { set conflictResult {0 2836} } else { set conflictResult {1 {couldn't open socket: address already in use}} } test socket-11.6 {socket conflict} {socket doTestsWithRemoteServer} { set s1 [socket -server accept 2836] if {[catch {set s2 [socket -server accept 2836]} msg]} { set result [list 1 $msg] } else { set result [list 0 [lindex [fconfigure $s2 -sockname] 2]] close $s2 } close $s1 set result } $conflictResult test socket-11.7 {server with several clients} {socket doTestsWithRemoteServer} { sendCommand { set socket10_9_test_server [socket -server accept 2836] proc accept {s a p} { fconfigure $s -buffering line fileevent $s readable [list echo $s] } proc echo {s} { set l [gets $s] if {[eof $s]} { close $s } else { puts $s $l } } } set s1 [socket $remoteServerIP 2836] fconfigure $s1 -buffering line set s2 [socket $remoteServerIP 2836] fconfigure $s2 -buffering line set s3 [socket $remoteServerIP 2836] fconfigure $s3 -buffering line for {set i 0} {$i < 100} {incr i} { puts $s1 hello,s1 gets $s1 puts $s2 hello,s2 gets $s2 puts $s3 hello,s3 gets $s3 } close $s1 close $s2 close $s3 sendCommand {close $socket10_9_test_server} set i } 100 test socket-11.8 {client with several servers} {socket doTestsWithRemoteServer} { sendCommand { set s1 [socket -server "accept 4003" 4003] set s2 [socket -server "accept 4004" 4004] set s3 [socket -server "accept 4005" 4005] proc accept {mp s a p} { puts $s $mp close $s } } set s1 [socket $remoteServerIP 4003] set s2 [socket $remoteServerIP 4004] set s3 [socket $remoteServerIP 4005] set l "" lappend l [gets $s1] [gets $s1] [eof $s1] [gets $s2] [gets $s2] [eof $s2] \ [gets $s3] [gets $s3] [eof $s3] close $s1 close $s2 close $s3 sendCommand { close $s1 close $s2 close $s3 } set l } {4003 {} 1 4004 {} 1 4005 {} 1} test socket-11.9 {accept callback error} {socket doTestsWithRemoteServer} { set s [socket -server accept 2836] proc accept {s a p} {expr 10 / 0} proc bgerror args { global x set x $args } if {[catch {sendCommand { set peername [fconfigure $callerSocket -peername] set s [socket [lindex $peername 0] 2836] close $s }} msg]} { close $s error $msg } set timer [after 10000 "set x timed_out"] vwait x after cancel $timer close $s rename bgerror {} set x } {{divide by zero}} test socket-11.10 {testing socket specific options} {socket doTestsWithRemoteServer} { sendCommand { set socket10_12_test_server [socket -server accept 2836] proc accept {s a p} {close $s} } set s [socket $remoteServerIP 2836] set p [fconfigure $s -peername] set n [fconfigure $s -sockname] set l "" lappend l [lindex $p 2] [llength $p] [llength $p] close $s sendCommand {close $socket10_12_test_server} set l } {2836 3 3} test socket-11.11 {testing spurious events} {socket doTestsWithRemoteServer} { sendCommand { set socket10_13_test_server [socket -server accept 2836] proc accept {s a p} { fconfigure $s -translation "auto lf" after 100 writesome $s } proc writesome {s} { for {set i 0} {$i < 100} {incr i} { puts $s "line $i from remote server" } close $s } } set len 0 set spurious 0 set done 0 proc readlittle {s} { global spurious done len set l [read $s 1] if {[string length $l] == 0} { if {![eof $s]} { incr spurious } else { close $s set done 1 } } else { incr len [string length $l] } } set c [socket $remoteServerIP 2836] fileevent $c readable "readlittle $c" set timer [after 10000 "set done timed_out"] vwait done after cancel $timer sendCommand {close $socket10_13_test_server} list $spurious $len } {0 2690} test socket-11.12 {testing EOF stickyness} {socket doTestsWithRemoteServer} { set counter 0 set done 0 proc count_up {s} { global counter done after_id set l [gets $s] if {[eof $s]} { incr counter if {$counter > 9} { set done {EOF is sticky} after cancel $after_id close $s } } } proc timed_out {} { global c done set done {timed_out, EOF is not sticky} close $c } sendCommand { set socket10_14_test_server [socket -server accept 2836] proc accept {s a p} { after 100 close $s } } set c [socket $remoteServerIP 2836] fileevent $c readable [list count_up $c] set after_id [after 1000 timed_out] vwait done sendCommand {close $socket10_14_test_server} set done } {EOF is sticky} test socket-11.13 {testing async write, async flush, async close} \ {socket doTestsWithRemoteServer} { proc readit {s} { global count done set l [read $s] incr count [string length $l] if {[eof $s]} { close $s set done 1 } } sendCommand { set firstblock "" for {set i 0} {$i < 5} {incr i} { set firstblock "a$firstblock$firstblock" } set secondblock "" for {set i 0} {$i < 16} {incr i} { set secondblock "b$secondblock$secondblock" } set l [socket -server accept 2845] proc accept {s a p} { fconfigure $s -blocking 0 -translation lf -buffersize 16384 \ -buffering line fileevent $s readable "readable $s" } proc readable {s} { set l [gets $s] fileevent $s readable {} after 1000 respond $s } proc respond {s} { global firstblock puts -nonewline $s $firstblock after 1000 writedata $s } proc writedata {s} { global secondblock puts -nonewline $s $secondblock close $s } } set s [socket $remoteServerIP 2845] fconfigure $s -blocking 0 -trans lf -buffering line set count 0 puts $s hello fileevent $s readable "readit $s" set timer [after 10000 "set done timed_out"] vwait done after cancel $timer sendCommand {close $l} set count } 65566 test socket-12.1 {testing inheritance of server sockets} {socket exec} { removeFile script1 removeFile script2 # Script1 is just a 10 second delay. If the server socket # is inherited, it will be held open for 10 seconds set f [open script1 w] puts $f { after 10000 exit vwait forever } close $f # Script2 creates the server socket, launches script1, # waits a second, and exits. The server socket will now # be closed unless script1 inherited it. set f [open script2 w] puts $f [list set tcltest $::tcltest::tcltest] puts $f { set f [socket -server accept 0] puts [lindex [fconfigure $f -sockname] 2] proc accept { file addr port } { close $file } exec $tcltest script1 & close $f after 1000 exit vwait forever } close $f # Launch script2 and wait 5 seconds ### exec $::tcltest::tcltest script2 & set p [open "|[list $::tcltest::tcltest script2]" r] gets $f listen after 5000 { set ok_to_proceed 1 } vwait ok_to_proceed # If we can still connect to the server, the socket got inherited. if {[catch {socket 127.0.0.1 $listen} msg]} { set x {server socket was not inherited} } else { close $msg set x {server socket was inherited} } removeFile script1 removeFile script2 close $p set x } {server socket was not inherited} test socket-12.2 {testing inheritance of client sockets} {socket exec} { removeFile script1 removeFile script2 # Script1 is just a 10 second delay. If the server socket # is inherited, it will be held open for 10 seconds set f [open script1 w] puts $f { after 10000 exit vwait forever } close $f # Script2 opens the client socket and writes to it. It then # launches script1 and exits. If the child process inherited the # client socket, the socket will still be open. set f [open script2 w] puts $f [list set tcltest $::tcltest::tcltest] puts $f { gets stdin port set f [socket 127.0.0.1 $port] exec $tcltest script1 & puts $f testing flush $f after 1000 exit vwait forever } close $f # Create the server socket set server [socket -server accept 0] proc accept { file host port } { # When the client connects, establish the read handler global server close $server fileevent $file readable [list getdata $file] fconfigure $file -buffering line -blocking 0 return } proc getdata { file } { # Read handler on the accepted socket. global x global failed set status [catch {read $file} data] if {$status != 0} { set x {read failed, error was $data} catch { close $file } } elseif {[string compare {} $data]} { } elseif {[fblocked $file]} { } elseif {[eof $file]} { if {$failed} { set x {client socket was inherited} } else { set x {client socket was not inherited} } catch { close $file } } else { set x {impossible case} catch { close $file } } return } # If the socket doesn't hit end-of-file in 5 seconds, the # script1 process must have inherited the client. set failed 0 after 5000 [list set failed 1] # Launch the script2 process ### exec $::tcltest::tcltest script2 & set p [open "|[list $::tcltest::tcltest script2]" w] puts $p [lindex [fconfigure $server -sockname] 2] ; flush $p vwait x if {!$failed} { vwait failed } removeFile script1 removeFile script2 close $p set x } {client socket was not inherited} test socket-12.3 {testing inheritance of accepted sockets} {socket exec} { removeFile script1 removeFile script2 set f [open script1 w] puts $f { after 10000 exit vwait forever } close $f set f [open script2 w] puts $f [list set tcltest $::tcltest::tcltest] puts $f { set server [socket -server accept 0] puts stdout [lindex [fconfigure $server -sockname] 2] proc accept { file host port } { global tcltest puts $file {test data on socket} exec $tcltest script1 & after 1000 exit } vwait forever } close $f # Launch the script2 process and connect to it. See how long # the socket stays open ## exec $::tcltest::tcltest script2 & set p [open "|[list $::tcltest::tcltest script2]" r] gets $p listen after 1000 set ok_to_proceed 1 vwait ok_to_proceed set f [socket 127.0.0.1 $listen] fconfigure $f -buffering full -blocking 0 fileevent $f readable [list getdata $f] # If the socket is still open after 5 seconds, the script1 process # must have inherited the accepted socket. set failed 0 after 5000 set failed 1 proc getdata { file } { # Read handler on the client socket. global x global failed set status [catch {read $file} data] if {$status != 0} { set x {read failed, error was $data} catch { close $file } } elseif {[string compare {} $data]} { } elseif {[fblocked $file]} { } elseif {[eof $file]} { if {$failed} { set x {accepted socket was inherited} } else { set x {accepted socket was not inherited} } catch { close $file } } else { set x {impossible case} catch { close $file } } return } vwait x removeFile script1 removeFile script2 close $p set x } {accepted socket was not inherited} test socket-13.1 {Testing use of shared socket between two threads} \ {socket testthread} { removeFile script threadReap makeFile { set f [socket -server accept 0] set listen [lindex [fconfigure $f -sockname] 2] proc accept {s a p} { fileevent $s readable [list echo $s] fconfigure $s -buffering line } proc echo {s} { global i set l [gets $s] if {[eof $s]} { global x close $s set x done } else { incr i puts $s $l } } set i 0 vwait x close $f # thread cleans itself up. testthread exit } script # create a thread set serverthread [testthread create { source script } ] update set port [testthread send $serverthread {set listen}] update after 1000 set s [socket 127.0.0.1 $port] fconfigure $s -buffering line catch { puts $s "hello" gets $s result } close $s update after 2000 lappend result [threadReap] set result } {hello 1} # cleanup if {[string match sock* $commandSocket] == 1} { puts $commandSocket exit flush $commandSocket } catch {close $commandSocket} catch {close $remoteProcChan} ::tcltest::cleanupTests flush stdout return