# Commands covered:  trace
#
# This file contains a collection of tests for one or more of the Tcl
# built-in commands.  Sourcing this file into Tcl runs the tests and
# generates output for errors.  No output means no errors were found.
#
# Copyright (c) 1991-1993 The Regents of the University of California.
# Copyright (c) 1994 Sun Microsystems, Inc.
# Copyright (c) 1998-1999 by Scriptics Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.

package require tcltest
namespace import ::tcltest::*

::tcltest::loadTestedCommands
catch [list package require -exact Tcltest [info patchlevel]]

testConstraint testcmdtrace [llength [info commands testcmdtrace]]
testConstraint testevalobjv [llength [info commands testevalobjv]]

# Used for constraining memory leak tests
testConstraint memory [llength [info commands memory]]

proc getbytes {} {
    set lines [split [memory info] "\n"]
    lindex [lindex $lines 3] 3
}

proc traceScalar {name1 name2 op} {
    global info
    set info [list $name1 $name2 $op [catch {uplevel 1 set $name1} msg] $msg]
}
proc traceScalarAppend {name1 name2 op} {
    global info
    lappend info $name1 $name2 $op [catch {uplevel 1 set $name1} msg] $msg
}
proc traceArray {name1 name2 op} {
    global info
    set info [list $name1 $name2 $op [catch {uplevel 1 set [set name1]($name2)} msg] $msg]
}
proc traceArray2 {name1 name2 op} {
    global info
    set info [list $name1 $name2 $op]
}
proc traceProc {name1 name2 op} {
    global info
    set info [concat $info [list $name1 $name2 $op]]
}
proc traceTag {tag args} {
    global info
    set info [concat $info $tag]
}
proc traceError {args} {
    error "trace returned error"
}
proc traceCheck {cmd args} {
    global info
    set info [list [catch $cmd msg] $msg]
}
proc traceCrtElement {value name1 name2 op} {
    uplevel 1 set ${name1}($name2) $value
}
proc traceCommand {oldName newName op} {
    global info
    set info [list $oldName $newName $op]
}

test trace-0.0 {memory corruption in trace (Tcl Bug 484339)} {
    # You may need Purify or Electric Fence to reliably
    # see this one fail.
    unset -nocomplain z
    trace add variable z array {set z(foo) 1 ;#}
    set res "names: [array names z]"
    unset -nocomplain ::z
    trace variable ::z w {unset ::z; error "memory corruption";#}
    list [catch {set ::z 1} msg] $msg
} {1 {can't set "::z": memory corruption}}

# Read-tracing on variables

test trace-1.1 {trace variable reads} {
    unset -nocomplain x
    set info {}
    trace add variable x read traceScalar
    list [catch {set x} msg] $msg $info
} {1 {can't read "x": no such variable} {x {} read 1 {can't read "x": no such variable}}}
test trace-1.2 {trace variable reads} {
    unset -nocomplain x
    set x 123
    set info {}
    trace add variable x read traceScalar
    list [catch {set x} msg] $msg $info
} {0 123 {x {} read 0 123}}
test trace-1.3 {trace variable reads} {
    unset -nocomplain x
    set info {}
    trace add variable x read traceScalar
    set x 123
    set info
} {}
test trace-1.4 {trace array element reads} {
    unset -nocomplain x
    set info {}
    trace add variable x(2) read traceArray
    list [catch {set x(2)} msg] $msg $info
} {1 {can't read "x(2)": no such element in array} {x 2 read 1 {can't read "x(2)": no such element in array}}}
test trace-1.5 {trace array element reads} {
    unset -nocomplain x
    set x(2) zzz
    set info {}
    trace add variable x(2) read traceArray
    list [catch {set x(2)} msg] $msg $info
} {0 zzz {x 2 read 0 zzz}}
test trace-1.6 {trace array element reads} {
    unset -nocomplain x
    set info {}
    trace add variable x read traceArray2
    proc p {} {
        global x
        set x(2) willi
        return $x(2)
    }
    list [catch {p} msg] $msg $info
} {0 willi {x 2 read}}
test trace-1.7 {trace array element reads, create element undefined if nonexistant} {
    unset -nocomplain x
    set info {}
    trace add variable x read q
    proc q {name1 name2 op} {
        global info
        set info [list $name1 $name2 $op]
        global $name1
        set ${name1}($name2) wolf
    }
    proc p {} {
        global x
        set x(X) willi
        return $x(Y)
    }
    list [catch {p} msg] $msg $info
} {0 wolf {x Y read}}
test trace-1.8 {trace reads on whole arrays} {
    unset -nocomplain x
    set info {}
    trace add variable x read traceArray
    list [catch {set x(2)} msg] $msg $info
} {1 {can't read "x(2)": no such variable} {}}
test trace-1.9 {trace reads on whole arrays} {
    unset -nocomplain x
    set x(2) zzz
    set info {}
    trace add variable x read traceArray
    list [catch {set x(2)} msg] $msg $info
} {0 zzz {x 2 read 0 zzz}}
test trace-1.10 {trace variable reads} {
    unset -nocomplain x
    set x 444
    set info {}
    trace add variable x read traceScalar
    unset x
    set info
} {}
test trace-1.11 {read traces that modify the array structure} {
    unset -nocomplain x
    set x(bar) 0 
    trace variable x r {set x(foo) 1 ;#} 
    trace variable x r {unset -nocomplain x(bar) ;#} 
    array get x
} {}
test trace-1.12 {read traces that modify the array structure} {
    unset -nocomplain x
    set x(bar) 0 
    trace variable x r {unset -nocomplain x(bar) ;#} 
    trace variable x r {set x(foo) 1 ;#} 
    array get x
} {}
test trace-1.13 {read traces that modify the array structure} {
    unset -nocomplain x
    set x(bar) 0 
    trace variable x r {set x(foo) 1 ;#} 
    trace variable x r {unset -nocomplain x;#} 
    list [catch {array get x} res] $res
} {1 {can't read "x(bar)": no such variable}}
test trace-1.14 {read traces that modify the array structure} {
    unset -nocomplain x
    set x(bar) 0 
    trace variable x r {unset -nocomplain x;#} 
    trace variable x r {set x(foo) 1 ;#} 
    list [catch {array get x} res] $res
} {1 {can't read "x(bar)": no such variable}}

# Basic write-tracing on variables

test trace-2.1 {trace variable writes} {
    unset -nocomplain x
    set info {}
    trace add variable x write traceScalar
    set x 123
    set info
} {x {} write 0 123}
test trace-2.2 {trace writes to array elements} {
    unset -nocomplain x
    set info {}
    trace add variable x(33) write traceArray
    set x(33) 444
    set info
} {x 33 write 0 444}
test trace-2.3 {trace writes on whole arrays} {
    unset -nocomplain x
    set info {}
    trace add variable x write traceArray
    set x(abc) qq
    set info
} {x abc write 0 qq}
test trace-2.4 {trace variable writes} {
    unset -nocomplain x
    set x 1234
    set info {}
    trace add variable x write traceScalar
    set x
    set info
} {}
test trace-2.5 {trace variable writes} {
    unset -nocomplain x
    set x 1234
    set info {}
    trace add variable x write traceScalar
    unset x
    set info
} {}
test trace-2.6 {trace variable writes on compiled local} {
    #
    # Check correct function of whole array traces on compiled local
    # arrays [Bug 1770591]. The corresponding function for read traces is
    # already indirectly tested in trace-1.7
    #
    unset -nocomplain x
    set info {}
    proc p {} {
	trace add variable x write traceArray
	set x(X) willy
    }
    p
    set info
} {x X write 0 willy}
test trace-2.7 {trace variable writes on errorInfo} -body {
   #
   # Check correct behaviour of write traces on errorInfo.
   # [Bug 1773040]
   trace add variable ::errorInfo write traceScalar
   catch {set dne}
   lrange [set info] 0 2
} -cleanup {
   # always remove trace on errorInfo otherwise further tests will fail
   unset ::errorInfo
} -result {::errorInfo {} write}



# append no longer triggers read traces when fetching the old values of
# variables before doing the append operation. However, lappend _does_
# still trigger these read traces. Also lappend triggers only one write
# trace: after appending all arguments to the list.

test trace-3.1 {trace variable read-modify-writes} {
    unset -nocomplain x
    set info {}
    trace add variable x read traceScalarAppend
    append x 123
    append x 456
    lappend x 789
    set info
} {x {} read 0 123456}
test trace-3.2 {trace variable read-modify-writes} {
    unset -nocomplain x
    set info {}
    trace add variable x {read write} traceScalarAppend
    append x 123
    lappend x 456
    set info
} {x {} write 0 123 x {} read 0 123 x {} write 0 {123 456}}

# Basic unset-tracing on variables

test trace-4.1 {trace variable unsets} {
    unset -nocomplain x
    set info {}
    trace add variable x unset traceScalar
    unset -nocomplain x
    set info
} {x {} unset 1 {can't read "x": no such variable}}
test trace-4.2 {variable mustn't exist during unset trace} {
    unset -nocomplain x
    set x 1234
    set info {}
    trace add variable x unset traceScalar
    unset x
    set info
} {x {} unset 1 {can't read "x": no such variable}}
test trace-4.3 {unset traces mustn't be called during reads and writes} {
    unset -nocomplain x
    set info {}
    trace add variable x unset traceScalar
    set x 44
    set x
    set info
} {}
test trace-4.4 {trace unsets on array elements} {
    unset -nocomplain x
    set x(0) 18
    set info {}
    trace add variable x(1) unset traceArray
    unset -nocomplain x(1)
    set info
} {x 1 unset 1 {can't read "x(1)": no such element in array}}
test trace-4.5 {trace unsets on array elements} {
    unset -nocomplain x
    set x(1) 18
    set info {}
    trace add variable x(1) unset traceArray
    unset x(1)
    set info
} {x 1 unset 1 {can't read "x(1)": no such element in array}}
test trace-4.6 {trace unsets on array elements} {
    unset -nocomplain x
    set x(1) 18
    set info {}
    trace add variable x(1) unset traceArray
    unset x
    set info
} {x 1 unset 1 {can't read "x(1)": no such variable}}
test trace-4.7 {trace unsets on whole arrays} {
    unset -nocomplain x
    set x(1) 18
    set info {}
    trace add variable x unset traceProc
    unset -nocomplain x(0)
    set info
} {}
test trace-4.8 {trace unsets on whole arrays} {
    unset -nocomplain x
    set x(1) 18
    set x(2) 144
    set x(3) 14
    set info {}
    trace add variable x unset traceProc
    unset x(1)
    set info
} {x 1 unset}
test trace-4.9 {trace unsets on whole arrays} {
    unset -nocomplain x
    set x(1) 18
    set x(2) 144
    set x(3) 14
    set info {}
    trace add variable x unset traceProc
    unset x
    set info
} {x {} unset}

# Array tracing on variables
test trace-5.1 {array traces fire on accesses via [array]} {
    unset -nocomplain x
    set x(b) 2
    trace add variable x array traceArray2
    set ::info {}
    array set x {a 1}
    set ::info
} {x {} array}
test trace-5.2 {array traces do not fire on normal accesses} {
    unset -nocomplain x
    set x(b) 2
    trace add variable x array traceArray2
    set ::info {}
    set x(a) 1
    set x(b) $x(a)
    set ::info
} {}
test trace-5.3 {array traces do not outlive variable} {
    unset -nocomplain x
    trace add variable x array traceArray2
    set ::info {}
    set x(a) 1
    unset x
    array set x {a 1}
    set ::info
} {}
test trace-5.4 {array traces properly listed in trace information} {
    unset -nocomplain x
    trace add variable x array traceArray2
    set result [trace info variable x]
    set result
} [list [list array traceArray2]]
test trace-5.5 {array traces properly listed in trace information} {
    unset -nocomplain x
    trace variable x a traceArray2
    set result [trace vinfo x]
    set result
} [list [list a traceArray2]]
test trace-5.6 {array traces don't fire on scalar variables} {
    unset -nocomplain x
    set x foo
    trace add variable x array traceArray2
    set ::info {}
    catch {array set x {a 1}}
    set ::info
} {}
test trace-5.7 {array traces fire for undefined variables} {
    unset -nocomplain x
    trace add variable x array traceArray2
    set ::info {}
    array set x {a 1}
    set ::info
} {x {} array}
test trace-5.8 {array traces fire for undefined variables} {
    unset -nocomplain x
    trace add variable x array {set x(foo) 1 ;#}
    set res "names: [array names x]"
} {names: foo}
    
# Trace multiple trace types at once.

test trace-6.1 {multiple ops traced at once} {
    unset -nocomplain x
    set info {}
    trace add variable x {read write unset} traceProc
    catch {set x}
    set x 22
    set x
    set x 33
    unset x
    set info
} {x {} read x {} write x {} read x {} write x {} unset}
test trace-6.2 {multiple ops traced on array element} {
    unset -nocomplain x
    set info {}
    trace add variable x(0) {read write unset} traceProc
    catch {set x(0)}
    set x(0) 22
    set x(0)
    set x(0) 33
    unset x(0)
    unset x
    set info
} {x 0 read x 0 write x 0 read x 0 write x 0 unset}
test trace-6.3 {multiple ops traced on whole array} {
    unset -nocomplain x
    set info {}
    trace add variable x {read write unset} traceProc
    catch {set x(0)}
    set x(0) 22
    set x(0)
    set x(0) 33
    unset x(0)
    unset x
    set info
} {x 0 write x 0 read x 0 write x 0 unset x {} unset}

# Check order of invocation of traces

test trace-7.1 {order of invocation of traces} {
    unset -nocomplain x
    set info {}
    trace add variable x read "traceTag 1"
    trace add variable x read "traceTag 2"
    trace add variable x read "traceTag 3"
    catch {set x}
    set x 22
    set x
    set info
} {3 2 1 3 2 1}
test trace-7.2 {order of invocation of traces} {
    unset -nocomplain x
    set x(0) 44
    set info {}
    trace add variable x(0) read "traceTag 1"
    trace add variable x(0) read "traceTag 2"
    trace add variable x(0) read "traceTag 3"
    set x(0)
    set info
} {3 2 1}
test trace-7.3 {order of invocation of traces} {
    unset -nocomplain x
    set x(0) 44
    set info {}
    trace add variable x(0) read "traceTag 1"
    trace add variable x read "traceTag A1"
    trace add variable x(0) read "traceTag 2"
    trace add variable x read "traceTag A2"
    trace add variable x(0) read "traceTag 3"
    trace add variable x read "traceTag A3"
    set x(0)
    set info
} {A3 A2 A1 3 2 1}

# Check effects of errors in trace procedures

test trace-8.1 {error returns from traces} {
    unset -nocomplain x
    set x 123
    set info {}
    trace add variable x read "traceTag 1"
    trace add variable x read traceError
    list [catch {set x} msg] $msg $info
} {1 {can't read "x": trace returned error} {}}
test trace-8.2 {error returns from traces} {
    unset -nocomplain x
    set x 123
    set info {}
    trace add variable x write "traceTag 1"
    trace add variable x write traceError
    list [catch {set x 44} msg] $msg $info
} {1 {can't set "x": trace returned error} {}}
test trace-8.3 {error returns from traces} {
    unset -nocomplain x
    set x 123
    set info {}
    trace add variable x write traceError
    list [catch {append x 44} msg] $msg $info
} {1 {can't set "x": trace returned error} {}}
test trace-8.4 {error returns from traces} {
    unset -nocomplain x
    set x 123
    set info {}
    trace add variable x unset "traceTag 1"
    trace add variable x unset traceError
    list [catch {unset x} msg] $msg $info
} {0 {} 1}
test trace-8.5 {error returns from traces} {
    unset -nocomplain x
    set x(0) 123
    set info {}
    trace add variable x(0) read "traceTag 1"
    trace add variable x read "traceTag 2"
    trace add variable x read traceError
    trace add variable x read "traceTag 3"
    list [catch {set x(0)} msg] $msg $info
} {1 {can't read "x(0)": trace returned error} 3}
test trace-8.6 {error returns from traces} {
    unset -nocomplain x
    set x 123
    trace add variable x unset traceError
    list [catch {unset x} msg] $msg
} {0 {}}
test trace-8.7 {error returns from traces} {
    # This test just makes sure that the memory for the error message
    # gets deallocated correctly when the trace is invoked again or
    # when the trace is deleted.
    unset -nocomplain x
    set x 123
    trace add variable x read traceError
    catch {set x}
    catch {set x}
    trace remove variable x read traceError
} {}
test trace-8.8 {error returns from traces} {
    # Yet more elaborate memory corruption testing that checks nothing
    # bad happens when the trace deletes itself and installs something
    # new.  Alas, there is no neat way to guarantee that this test will
    # fail if there is a problem, but that's life and with the new code
    # it should *never* fail.
    #
    # Adapted from Bug #219393 reported by Don Porter.
    catch {rename ::foo {}}
    proc foo {old args} {
	trace remove variable ::x write [list foo $old]
	trace add    variable ::x write [list foo $::x]
	error "foo"
    }
    unset -nocomplain ::x ::y
    set x junk
    trace add variable ::x write [list foo $x]
    for {set y 0} {$y<100} {incr y} {
	catch {set x junk}
    }
    unset x
} {}

# Check to see that variables are expunged before trace
# procedures are invoked, so trace procedure can even manipulate
# a new copy of the variables.

test trace-9.1 {be sure variable is unset before trace is called} {
    unset -nocomplain x
    set x 33
    set info {}
    trace add variable x unset {traceCheck {uplevel 1 set x}}
    unset x
    set info
} {1 {can't read "x": no such variable}}
test trace-9.2 {be sure variable is unset before trace is called} {
    unset -nocomplain x
    set x 33
    set info {}
    trace add variable x unset {traceCheck {uplevel 1 set x 22}}
    unset x
    concat $info [list [catch {set x} msg] $msg]
} {0 22 0 22}
test trace-9.3 {be sure traces are cleared before unset trace called} {
    unset -nocomplain x
    set x 33
    set info {}
    trace add variable x unset {traceCheck {uplevel 1 trace info variable x}}
    unset x
    set info
} {0 {}}
test trace-9.4 {set new trace during unset trace} {
    unset -nocomplain x
    set x 33
    set info {}
    trace add variable x unset {traceCheck {global x; trace add variable x unset traceProc}}
    unset x
    concat $info [trace info variable x]
} {0 {} {unset traceProc}}

test trace-10.1 {make sure array elements are unset before traces are called} {
    unset -nocomplain x
    set x(0) 33
    set info {}
    trace add variable x(0) unset {traceCheck {uplevel 1 set x(0)}}
    unset x(0)
    set info
} {1 {can't read "x(0)": no such element in array}}
test trace-10.2 {make sure array elements are unset before traces are called} {
    unset -nocomplain x
    set x(0) 33
    set info {}
    trace add variable x(0) unset {traceCheck {uplevel 1 set x(0) zzz}}
    unset x(0)
    concat $info [list [catch {set x(0)} msg] $msg]
} {0 zzz 0 zzz}
test trace-10.3 {array elements are unset before traces are called} {
    unset -nocomplain x
    set x(0) 33
    set info {}
    trace add variable x(0) unset {traceCheck {global x; trace info variable x(0)}}
    unset x(0)
    set info
} {0 {}}
test trace-10.4 {set new array element trace during unset trace} {
    unset -nocomplain x
    set x(0) 33
    set info {}
    trace add variable x(0) unset {traceCheck {uplevel 1 {trace add variable x(0) read {}}}}
    unset -nocomplain x(0)
    concat $info [trace info variable x(0)]
} {0 {} {read {}}}

test trace-11.1 {make sure arrays are unset before traces are called} {
    unset -nocomplain x
    set x(0) 33
    set info {}
    trace add variable x unset {traceCheck {uplevel 1 set x(0)}}
    unset x
    set info
} {1 {can't read "x(0)": no such variable}}
test trace-11.2 {make sure arrays are unset before traces are called} {
    unset -nocomplain x
    set x(y) 33
    set info {}
    trace add variable x unset {traceCheck {uplevel 1 set x(y) 22}}
    unset x
    concat $info [list [catch {set x(y)} msg] $msg]
} {0 22 0 22}
test trace-11.3 {make sure arrays are unset before traces are called} {
    unset -nocomplain x
    set x(y) 33
    set info {}
    trace add variable x unset {traceCheck {uplevel 1 array exists x}}
    unset x
    set info
} {0 0}
test trace-11.4 {make sure arrays are unset before traces are called} {
    unset -nocomplain x
    set x(y) 33
    set info {}
    set cmd {traceCheck {uplevel 1 {trace info variable x}}}
    trace add variable x unset $cmd
    unset x
    set info
} {0 {}}
test trace-11.5 {set new array trace during unset trace} {
    unset -nocomplain x
    set x(y) 33
    set info {}
    trace add variable x unset {traceCheck {global x; trace add variable x read {}}}
    unset x
    concat $info [trace info variable x]
} {0 {} {read {}}}
test trace-11.6 {create scalar during array unset trace} {
    unset -nocomplain x
    set x(y) 33
    set info {}
    trace add variable x unset {traceCheck {global x; set x 44}}
    unset x
    concat $info [list [catch {set x} msg] $msg]
} {0 44 0 44}

# Check special conditions (e.g. errors) in Tcl_TraceVar2.

test trace-12.1 {creating array when setting variable traces} {
    unset -nocomplain x
    set info {}
    trace add variable x(0) write traceProc
    list [catch {set x 22} msg] $msg
} {1 {can't set "x": variable is array}}
test trace-12.2 {creating array when setting variable traces} {
    unset -nocomplain x
    set info {}
    trace add variable x(0) write traceProc
    list [catch {set x(0)} msg] $msg
} {1 {can't read "x(0)": no such element in array}}
test trace-12.3 {creating array when setting variable traces} {
    unset -nocomplain x
    set info {}
    trace add variable x(0) write traceProc
    set x(0) 22
    set info
} {x 0 write}
test trace-12.4 {creating variable when setting variable traces} {
    unset -nocomplain x
    set info {}
    trace add variable x write traceProc
    list [catch {set x} msg] $msg
} {1 {can't read "x": no such variable}}
test trace-12.5 {creating variable when setting variable traces} {
    unset -nocomplain x
    set info {}
    trace add variable x write traceProc
    set x 22
    set info
} {x {} write}
test trace-12.6 {creating variable when setting variable traces} {
    unset -nocomplain x
    set info {}
    trace add variable x write traceProc
    set x(0) 22
    set info
} {x 0 write}
test trace-12.7 {create array element during read trace} {
    unset -nocomplain x
    set x(2) zzz
    trace add variable x read {traceCrtElement xyzzy}
    list [catch {set x(3)} msg] $msg
} {0 xyzzy}
test trace-12.8 {errors when setting variable traces} {
    unset -nocomplain x
    set x 44
    list [catch {trace add variable x(0) write traceProc} msg] $msg
} {1 {can't trace "x(0)": variable isn't array}}

# Check trace deletion

test trace-13.1 {delete one trace from another} {
    proc delTraces {args} {
	global x
	trace remove variable x read {traceTag 2}
	trace remove variable x read {traceTag 3}
	trace remove variable x read {traceTag 4}
    }
    unset -nocomplain x
    set x 44
    set info {}
    trace add variable x read {traceTag 1}
    trace add variable x read {traceTag 2}
    trace add variable x read {traceTag 3}
    trace add variable x read {traceTag 4}
    trace add variable x read delTraces 
    trace add variable x read {traceTag 5}
    set x
    set info
} {5 1}

test trace-13.2 {leak when unsetting traced variable} \
    -constraints memory -body {
	set end [getbytes]
	proc f args {}
	for {set i 0} {$i < 5} {incr i} {
	    trace add variable bepa write f
	    set bepa a
	    unset bepa
	    set tmp $end
	    set end [getbytes]
	}
	expr {$end - $tmp}
    } -cleanup {
	unset -nocomplain end i tmp
    } -result 0
test trace-13.3 {leak when removing traces} \
    -constraints memory -body {
	set end [getbytes]
	proc f args {}
	for {set i 0} {$i < 5} {incr i} {
	    trace add variable bepa write f
	    set bepa a
	    trace remove variable bepa write f
	    set tmp $end
	    set end [getbytes]
	}
	expr {$end - $tmp}
    } -cleanup {
	unset -nocomplain end i tmp
    } -result 0
test trace-13.4 {leaks in error returns from traces} \
    -constraints memory -body {
	set end [getbytes]
	for {set i 0} {$i < 5} {incr i} {
	    set apa {a 1 b 2}
	    set bepa [lrange $apa 0 end]
	    trace add variable bepa write {error hej}
	    catch {set bepa a}
	    unset bepa
	    set tmp $end
	    set end [getbytes]
	}
	expr {$end - $tmp}
    } -cleanup {
	unset -nocomplain end i tmp
    } -result 0

# Check operation and syntax of "trace" command.

# Syntax for adding/removing variable and command traces is basically the
# same:
#	trace add variable name opList command
#	trace remove variable name opList command
#
# The following loops just get all the common "wrong # args" tests done.

set i 0
set start "wrong # args:"
foreach type {variable command} {
    foreach op {add remove} {
	test trace-14.0.[incr i] "trace command, wrong # args errors" {
	    list [catch {trace $op $type} msg] $msg
	} [list 1 "$start should be \"trace $op $type name opList command\""]
	test trace-14.0.[incr i] "trace command wrong # args errors" {
	    list [catch {trace $op $type foo} msg] $msg
	} [list 1 "$start should be \"trace $op $type name opList command\""]
	test trace-14.0.[incr i] "trace command, wrong # args errors" {
	    list [catch {trace $op $type foo bar} msg] $msg
	} [list 1 "$start should be \"trace $op $type name opList command\""]
	test trace-14.0.[incr i] "trace command, wrong # args errors" {
	    list [catch {trace $op $type foo bar baz boo} msg] $msg
	} [list 1 "$start should be \"trace $op $type name opList command\""]
    }
    test trace-14.0.[incr i] "trace command, wrong # args errors" {
	list [catch {trace info $type foo bar} msg] $msg
    } [list 1 "$start should be \"trace info $type name\""]
    test trace-14.0.[incr i] "trace command, wrong # args errors" {
	list [catch {trace info $type} msg] $msg
    } [list 1 "$start should be \"trace info $type name\""]
}

test trace-14.1 "trace command, wrong # args errors" {
    list [catch {trace} msg] $msg
} [list 1 "wrong # args: should be \"trace option ?arg ...?\""]
test trace-14.2 "trace command, wrong # args errors" {
    list [catch {trace add} msg] $msg
} [list 1 "wrong # args: should be \"trace add type ?arg ...?\""]
test trace-14.3 "trace command, wrong # args errors" {
    list [catch {trace remove} msg] $msg
} [list 1 "wrong # args: should be \"trace remove type ?arg ...?\""]
test trace-14.4 "trace command, wrong # args errors" {
    list [catch {trace info} msg] $msg
} [list 1 "wrong # args: should be \"trace info type name\""]

test trace-14.5 {trace command, invalid option} {
    list [catch {trace gorp} msg] $msg
} [list 1 "bad option \"gorp\": must be add, info, remove, variable, vdelete, or vinfo"]

# Again, [trace ... command] and [trace ... variable] share syntax and
# error message styles for their opList options; these loops test those 
# error messages.

set i 0
set errs [list "array, read, unset, or write" "delete or rename" "enter, leave, enterstep, or leavestep"]
set abbvs [list {a r u w} {d r} {}]
proc x {} {}
foreach type {variable command execution} err $errs abbvlist $abbvs {
    foreach op {add remove} {
	test trace-14.6.[incr i] "trace $op $type errors" {
	    list [catch {trace $op $type x {y z w} a} msg] $msg
	} [list 1 "bad operation \"y\": must be $err"]
	foreach abbv $abbvlist {
	    test trace-14.6.[incr i] "trace $op $type rejects abbreviations" {
		list [catch {trace $op $type x $abbv a} msg] $msg
	    } [list 1 "bad operation \"$abbv\": must be $err"]
	}
	test trace-14.6.[incr i] "trace $op $type rejects null opList" {
	    list [catch {trace $op $type x {} a} msg] $msg
	} [list 1 "bad operation list \"\": must be one or more of $err"]
    }
}
rename x {}

test trace-14.7 {trace command, "trace variable" errors} {
    list [catch {trace variable} msg] $msg
} [list 1 "wrong # args: should be \"trace variable name ops command\""]
test trace-14.8 {trace command, "trace variable" errors} {
    list [catch {trace variable x} msg] $msg
} [list 1 "wrong # args: should be \"trace variable name ops command\""]
test trace-14.9 {trace command, "trace variable" errors} {
    list [catch {trace variable x y} msg] $msg
} [list 1 "wrong # args: should be \"trace variable name ops command\""]
test trace-14.10 {trace command, "trace variable" errors} {
    list [catch {trace variable x y z w} msg] $msg
} [list 1 "wrong # args: should be \"trace variable name ops command\""]
test trace-14.11 {trace command, "trace variable" errors} {
    list [catch {trace variable x y z} msg] $msg
} [list 1 "bad operations \"y\": should be one or more of rwua"]


test trace-14.12 {trace command ("remove variable" option)} {
    unset -nocomplain x
    set info {}
    trace add variable x write traceProc
    trace remove variable x write traceProc
} {}
test trace-14.13 {trace command ("remove variable" option)} {
    unset -nocomplain x
    set info {}
    trace add variable x write traceProc
    trace remove variable x write traceProc
    set x 12345
    set info
} {}
test trace-14.14 {trace command ("remove variable" option)} {
    unset -nocomplain x
    set info {}
    trace add variable x write {traceTag 1}
    trace add variable x write traceProc
    trace add variable x write {traceTag 2}
    set x yy
    trace remove variable x write traceProc
    set x 12345
    trace remove variable x write {traceTag 1}
    set x foo
    trace remove variable x write {traceTag 2}
    set x gorp
    set info
} {2 x {} write 1 2 1 2}
test trace-14.15 {trace command ("remove variable" option)} {
    unset -nocomplain x
    set info {}
    trace add variable x write {traceTag 1}
    trace remove variable x write non_existent
    set x 12345
    set info
} {1}
test trace-14.16 {trace command ("info variable" option)} {
    unset -nocomplain x
    trace add variable x write {traceTag 1}
    trace add variable x write traceProc
    trace add variable x write {traceTag 2}
    trace info variable x
} {{write {traceTag 2}} {write traceProc} {write {traceTag 1}}}
test trace-14.17 {trace command ("info variable" option)} {
    unset -nocomplain x
    trace info variable x
} {}
test trace-14.18 {trace command ("info variable" option)} {
    unset -nocomplain x
    trace info variable x(0)
} {}
test trace-14.19 {trace command ("info variable" option)} {
    unset -nocomplain x
    set x 44
    trace info variable x(0)
} {}
test trace-14.20 {trace command ("info variable" option)} {
    unset -nocomplain x
    set x 44
    trace add variable x write {traceTag 1}
    proc check {} {global x; trace info variable x}
    check
} {{write {traceTag 1}}}

# Check fancy trace commands (long ones, weird arguments, etc.)

test trace-15.1 {long trace command} {
    unset -nocomplain x
    set info {}
    trace add variable x write {traceTag {This is a very very long argument.  It's \
	designed to test out the facilities of TraceVarProc for dealing \
	with such long arguments by malloc-ing space.  One possibility \
	is that space doesn't get freed properly.  If this happens, then \
	invoking this test over and over again will eventually leak memory.}}
    set x 44
    set info
} {This is a very very long argument.  It's \
	designed to test out the facilities of TraceVarProc for dealing \
	with such long arguments by malloc-ing space.  One possibility \
	is that space doesn't get freed properly.  If this happens, then \
	invoking this test over and over again will eventually leak memory.}
test trace-15.2 {long trace command result to ignore} {
    proc longResult {args} {return "quite a bit of text, designed to
	generate a core leak if this command file is invoked over and over again
	and memory isn't being recycled correctly"}
    unset -nocomplain x
    trace add variable x write longResult
    set x 44
    set x 5
    set x abcde
} abcde
test trace-15.3 {special list-handling in trace commands} {
    unset -nocomplain "x y z"
    set "x y z(a\n\{)" 44
    set info {}
    trace add variable "x y z(a\n\{)" write traceProc
    set "x y z(a\n\{)" 33
    set info
} "{x y z} a\\n\\\{ write"

# Check for proper handling of unsets during traces.

proc traceUnset {unsetName args} {
    global info
    upvar 1 $unsetName x
    lappend info [catch {unset x} msg] $msg [catch {set x} msg] $msg
}
proc traceReset {unsetName resetName args} {
    global info
    upvar 1 $unsetName x $resetName y
    lappend info [catch {unset x} msg] $msg [catch {set y xyzzy} msg] $msg
}
proc traceReset2 {unsetName resetName args} {
    global info
    lappend info [catch {uplevel 1 unset $unsetName} msg] $msg \
	    [catch {uplevel 1 set $resetName xyzzy} msg] $msg
}
proc traceAppend {string name1 name2 op} {
    global info
    lappend info $string
}

test trace-16.1 {unsets during read traces} {
    unset -nocomplain y
    set y 1234
    set info {}
    trace add variable y read {traceUnset y}
    trace add variable y unset {traceAppend unset}
    lappend info [catch {set y} msg] $msg
} {unset 0 {} 1 {can't read "x": no such variable} 1 {can't read "y": no such variable}}
test trace-16.2 {unsets during read traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) read {traceUnset y(0)}
    lappend info [catch {set y(0)} msg] $msg
} {0 {} 1 {can't read "x": no such variable} 1 {can't read "y(0)": no such element in array}}
test trace-16.3 {unsets during read traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) read {traceUnset y}
    lappend info [catch {set y(0)} msg] $msg
} {0 {} 1 {can't read "x": no such variable} 1 {can't read "y(0)": no such variable}}
test trace-16.4 {unsets during read traces} {
    unset -nocomplain y
    set y 1234
    set info {}
    trace add variable y read {traceReset y y}
    lappend info [catch {set y} msg] $msg
} {0 {} 0 xyzzy 0 xyzzy}
test trace-16.5 {unsets during read traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) read {traceReset y(0) y(0)}
    lappend info [catch {set y(0)} msg] $msg
} {0 {} 0 xyzzy 0 xyzzy}
test trace-16.6 {unsets during read traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) read {traceReset y y(0)}
    lappend info [catch {set y(0)} msg] $msg [catch {set y(0)} msg] $msg
} {0 {} 1 {can't set "y": upvar refers to element in deleted array} 1 {can't read "y(0)": no such variable} 1 {can't read "y(0)": no such variable}}
test trace-16.7 {unsets during read traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) read {traceReset2 y y(0)}
    lappend info [catch {set y(0)} msg] $msg [catch {set y(0)} msg] $msg
} {0 {} 0 xyzzy 1 {can't read "y(0)": no such element in array} 0 xyzzy}
test trace-16.8 {unsets during write traces} {
    unset -nocomplain y
    set y 1234
    set info {}
    trace add variable y write {traceUnset y}
    trace add variable y unset {traceAppend unset}
    lappend info [catch {set y xxx} msg] $msg
} {unset 0 {} 1 {can't read "x": no such variable} 0 {}}
test trace-16.9 {unsets during write traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) write {traceUnset y(0)}
    lappend info [catch {set y(0) xxx} msg] $msg
} {0 {} 1 {can't read "x": no such variable} 0 {}}
test trace-16.10 {unsets during write traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) write {traceUnset y}
    lappend info [catch {set y(0) xxx} msg] $msg
} {0 {} 1 {can't read "x": no such variable} 0 {}}
test trace-16.11 {unsets during write traces} {
    unset -nocomplain y
    set y 1234
    set info {}
    trace add variable y write {traceReset y y}
    lappend info [catch {set y xxx} msg] $msg
} {0 {} 0 xyzzy 0 xyzzy}
test trace-16.12 {unsets during write traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) write {traceReset y(0) y(0)}
    lappend info [catch {set y(0) xxx} msg] $msg
} {0 {} 0 xyzzy 0 xyzzy}
test trace-16.13 {unsets during write traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) write {traceReset y y(0)}
    lappend info [catch {set y(0) xxx} msg] $msg [catch {set y(0)} msg] $msg
} {0 {} 1 {can't set "y": upvar refers to element in deleted array} 0 {} 1 {can't read "y(0)": no such variable}}
test trace-16.14 {unsets during write traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) write {traceReset2 y y(0)}
    lappend info [catch {set y(0) xxx} msg] $msg [catch {set y(0)} msg] $msg
} {0 {} 0 xyzzy 0 {} 0 xyzzy}
test trace-16.15 {unsets during unset traces} {
    unset -nocomplain y
    set y 1234
    set info {}
    trace add variable y unset {traceUnset y}
    lappend info [catch {unset y} msg] $msg [catch {set y} msg] $msg
} {1 {can't unset "x": no such variable} 1 {can't read "x": no such variable} 0 {} 1 {can't read "y": no such variable}}
test trace-16.16 {unsets during unset traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) unset {traceUnset y(0)}
    lappend info [catch {unset y(0)} msg] $msg [catch {set y(0)} msg] $msg
} {1 {can't unset "x": no such variable} 1 {can't read "x": no such variable} 0 {} 1 {can't read "y(0)": no such element in array}}
test trace-16.17 {unsets during unset traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) unset {traceUnset y}
    lappend info [catch {unset y(0)} msg] $msg [catch {set y(0)} msg] $msg
} {0 {} 1 {can't read "x": no such variable} 0 {} 1 {can't read "y(0)": no such variable}}
test trace-16.18 {unsets during unset traces} {
    unset -nocomplain y
    set y 1234
    set info {}
    trace add variable y unset {traceReset2 y y}
    lappend info [catch {unset y} msg] $msg [catch {set y} msg] $msg
} {1 {can't unset "y": no such variable} 0 xyzzy 0 {} 0 xyzzy}
test trace-16.19 {unsets during unset traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) unset {traceReset2 y(0) y(0)}
    lappend info [catch {unset y(0)} msg] $msg [catch {set y(0)} msg] $msg
} {1 {can't unset "y(0)": no such element in array} 0 xyzzy 0 {} 0 xyzzy}
test trace-16.20 {unsets during unset traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) unset {traceReset2 y y(0)}
    lappend info [catch {unset y(0)} msg] $msg [catch {set y(0)} msg] $msg
} {0 {} 0 xyzzy 0 {} 0 xyzzy}
test trace-16.21 {unsets cancelling traces} {
    unset -nocomplain y
    set y 1234
    set info {}
    trace add variable y read {traceAppend first}
    trace add variable y read {traceUnset y}
    trace add variable y read {traceAppend third}
    trace add variable y unset {traceAppend unset}
    lappend info [catch {set y} msg] $msg
} {third unset 0 {} 1 {can't read "x": no such variable} 1 {can't read "y": no such variable}}
test trace-16.22 {unsets cancelling traces} {
    unset -nocomplain y
    set y(0) 1234
    set info {}
    trace add variable y(0) read {traceAppend first}
    trace add variable y(0) read {traceUnset y}
    trace add variable y(0) read {traceAppend third}
    trace add variable y(0) unset {traceAppend unset}
    lappend info [catch {set y(0)} msg] $msg
} {third unset 0 {} 1 {can't read "x": no such variable} 1 {can't read "y(0)": no such variable}}

# Check various non-interference between traces and other things.

test trace-17.1 {trace doesn't prevent unset errors} {
    unset -nocomplain x
    set info {}
    trace add variable x unset {traceProc}
    list [catch {unset x} msg] $msg $info
} {1 {can't unset "x": no such variable} {x {} unset}}
test trace-17.2 {traced variables must survive procedure exits} {
    unset -nocomplain x
    proc p1 {} {global x; trace add variable x write traceProc}
    p1
    trace info variable x
} {{write traceProc}}
test trace-17.3 {traced variables must survive procedure exits} {
    unset -nocomplain x
    set info {}
    proc p1 {} {global x; trace add variable x write traceProc}
    p1
    set x 44
    set info
} {x {} write}

# Be sure that procedure frames are released before unset traces
# are invoked.

test trace-18.1 {unset traces on procedure returns} {
    proc p1 {x y} {set a 44; p2 14}
    proc p2 {z} {trace add variable z unset {traceCheck {lsort [uplevel 1 {info vars}]}}}
    set info {}
    p1 foo bar
    set info
} {0 {a x y}}
test trace-18.2 {namespace delete / trace vdelete combo} {
    namespace eval ::foo {
	variable x 123
    }
    proc p1 args {
	trace vdelete ::foo::x u p1
    }
    trace variable ::foo::x u p1
    namespace delete ::foo
    info exists ::foo::x
} 0
test trace-18.3 {namespace delete / trace vdelete combo, Bug \#1337229} {
    namespace eval ::ns {}
    trace add variable ::ns::var unset {unset ::ns::var ;#}
    namespace delete ::ns
} {}
test trace-18.4 {namespace delete / trace vdelete combo, Bug \#1338280} {
    namespace eval ::ref {}
    set ::ref::var1 AAA
    trace add variable ::ref::var1 unset doTrace
    set ::ref::var2 BBB
    trace add variable ::ref::var2 {unset} doTrace
    proc doTrace {vtraced vidx op} {
	global info
	append info [catch {set ::$vtraced}][llength [info vars ::ref::*]]
    }
    set info {}
    namespace delete ::ref
    rename doTrace {}
    set info
} 1110

# Delete arrays when done, so they can be re-used as scalars
# elsewhere.

unset -nocomplain x y

test trace-19.0.1 {trace add command (command existence)} {
    # Just in case!
    catch {rename nosuchname ""}
    list [catch {trace add command nosuchname rename traceCommand} msg] $msg
} {1 {unknown command "nosuchname"}}
test trace-19.0.2 {trace add command (command existence in ns)} {
    list [catch {trace add command nosuchns::nosuchname rename traceCommand} msg] $msg
} {1 {unknown command "nosuchns::nosuchname"}}


test trace-19.1 {trace add command (rename option)} {
    proc foo {} {}
    catch {rename bar {}}
    trace add command foo rename traceCommand
    rename foo bar
    set info
} {::foo ::bar rename}
test trace-19.2 {traces stick with renamed commands} {
    proc foo {} {}
    catch {rename bar {}}
    trace add command foo rename traceCommand
    rename foo bar
    rename bar foo
    set info
} {::bar ::foo rename}
test trace-19.2.1 {trace add command rename trace exists} {
    proc foo {} {}
    trace add command foo rename traceCommand
    trace info command foo
} {{rename traceCommand}}
test trace-19.3 {command rename traces don't fire on command deletion} {
    proc foo {} {}
    set info {}
    trace add command foo rename traceCommand
    rename foo {}
    set info
} {}
test trace-19.4 {trace add command rename doesn't trace recreated commands} {
    proc foo {} {}
    catch {rename bar {}}
    set info {}
    trace add command foo rename traceCommand
    proc foo {} {}
    rename foo bar
    set info
} {}
test trace-19.5 {trace add command deleted removes traces} {
    proc foo {} {}
    trace add command foo rename traceCommand
    proc foo {} {}
    trace info command foo
} {}

test trace-19.6 {trace add command rename in namespace} -setup {
    namespace eval tc {}
    proc tc::tcfoo {} {}
} -body {
    trace add command tc::tcfoo rename traceCommand
    rename tc::tcfoo tc::tcbar
    set info
} -cleanup {
    namespace delete tc
} -result {::tc::tcfoo ::tc::tcbar rename}
test trace-19.7 {trace add command rename in namespace back again} -setup {
    namespace eval tc {}
    proc tc::tcfoo {} {}
} -body {
    trace add command tc::tcfoo rename traceCommand
    rename tc::tcfoo tc::tcbar
    rename tc::tcbar tc::tcfoo
    set info
} -cleanup {
    namespace delete tc
} -result {::tc::tcbar ::tc::tcfoo rename}
test trace-19.8 {trace add command rename in namespace to out of namespace} -setup {
    namespace eval tc {}
    proc tc::tcfoo {} {}
} -body {
    trace add command tc::tcfoo rename traceCommand
    rename tc::tcfoo tcbar
    set info
} -cleanup {
    catch {rename tcbar {}}
    namespace delete tc
} -result {::tc::tcfoo ::tcbar rename}
test trace-19.9 {trace add command rename back into namespace} -setup {
    namespace eval tc {}
    proc tc::tcfoo {} {}
} -body {
    trace add command tc::tcfoo rename traceCommand
    rename tc::tcfoo tcbar
    rename tcbar tc::tcfoo
    set info
} -cleanup {
    namespace delete tc
} -result {::tcbar ::tc::tcfoo rename}
test trace-19.10 {trace add command failed rename doesn't trigger trace} {
    set info {}
    proc foo {} {}
    proc bar {} {}
    trace add command foo {rename delete} traceCommand
    catch {rename foo bar}
    set info
} {}
catch {rename foo {}}
catch {rename bar {}}

test trace-19.11 {trace add command qualifies when renamed in namespace} -setup {
    namespace eval tc {}
    proc tc::tcfoo {} {}
} -body {
    set info {}
    trace add command tc::tcfoo {rename delete} traceCommand
    namespace eval tc {rename tcfoo tcbar}
    set info
} -cleanup {
    namespace delete tc
} -result {::tc::tcfoo ::tc::tcbar rename}

# Make sure it exists again
proc foo {} {}

test trace-20.1 {trace add command (delete option)} {
    trace add command foo delete traceCommand
    rename foo ""
    set info
} {::foo {} delete}
test trace-20.2 {trace add command delete doesn't trace recreated commands} {
    set info {}
    proc foo {} {}
    rename foo ""
    set info
} {}
test trace-20.2.1 {trace add command delete trace info} {
    proc foo {} {}
    trace add command foo delete traceCommand
    trace info command foo
} {{delete traceCommand}}
test trace-20.3 {trace add command implicit delete} {
    proc foo {} {}
    trace add command foo delete traceCommand
    proc foo {} {}
    set info
} {::foo {} delete}
test trace-20.3.1 {trace add command delete trace info} {
    proc foo {} {}
    trace info command foo
} {}
test trace-20.4 {trace add command rename followed by delete} {
    set infotemp {}
    proc foo {} {}
    trace add command foo {rename delete} traceCommand
    rename foo bar
    lappend infotemp $info
    rename bar {}
    lappend infotemp $info
    set info $infotemp
    unset infotemp
    set info
} {{::foo ::bar rename} {::bar {} delete}}
catch {rename foo {}}
catch {rename bar {}}

test trace-20.5 {trace add command rename and delete} {
    set infotemp {}
    set info {}
    proc foo {} {}
    trace add command foo {rename delete} traceCommand
    rename foo bar
    lappend infotemp $info
    rename bar {}
    lappend infotemp $info
    set info $infotemp
    unset infotemp
    set info
} {{::foo ::bar rename} {::bar {} delete}}

test trace-20.6 {trace add command rename and delete in subinterp} {
    set tc [interp create]
    foreach p {traceCommand} {
	$tc eval [list proc $p [info args $p] [info body $p]]
    }
    $tc eval [list set infotemp {}]
    $tc eval [list set info {}]
    $tc eval [list proc foo {} {}]
    $tc eval [list trace add command foo {rename delete} traceCommand]
    $tc eval [list rename foo bar]
    $tc eval {lappend infotemp $info}
    $tc eval [list rename bar {}]
    $tc eval {lappend infotemp $info}
    $tc eval {set info $infotemp}
    $tc eval [list unset infotemp]
    set info [$tc eval [list set info]]
    interp delete $tc
    set info
} {{::foo ::bar rename} {::bar {} delete}}

# I'd like it if this test could give 'foo {} d' as a result,
# but interp deletion means there is no interp to evaluate
# the trace in.
test trace-20.7 {trace add command delete in subinterp while being deleted} {
    set info {}
    set tc [interp create]
    interp alias $tc traceCommand {} traceCommand
    $tc eval [list proc foo {} {}]
    $tc eval [list trace add command foo {rename delete} traceCommand]
    interp delete $tc
    set info
} {}

proc traceDelete {cmd old new op} {
    trace remove command $cmd {*}[lindex [trace info command $cmd] 0]
    global info
    set info [list $old $new $op]
}
proc traceCmdrename {cmd old new op} {
    rename $old someothername
}
proc traceCmddelete {cmd old new op} {
    rename $old ""
}
test trace-20.8 {trace delete while trace is active} {
    set info {}
    proc foo {} {}
    catch {rename bar {}}
    trace add command foo {rename delete} [list traceDelete foo]
    rename foo bar
    list [set info] [trace info command bar]
} {{::foo ::bar rename} {}}

test trace-20.9 {rename trace deletes command} {
    set info {}
    proc foo {} {}
    catch {rename bar {}}
    catch {rename someothername {}}
    trace add command foo rename [list traceCmddelete foo]
    rename foo bar
    list [info commands foo] [info commands bar] [info commands someothername]
} {{} {} {}}

test trace-20.10 {rename trace renames command} {
    set info {}
    proc foo {} {}
    catch {rename bar {}}
    catch {rename someothername {}}
    trace add command foo rename [list traceCmdrename foo]
    rename foo bar
    set info [list [info commands foo] [info commands bar] [info commands someothername]]
    rename someothername {}
    set info
} {{} {} someothername}

test trace-20.11 {delete trace deletes command} {
    set info {}
    proc foo {} {}
    catch {rename bar {}}
    catch {rename someothername {}}
    trace add command foo delete [list traceCmddelete foo]
    rename foo {}
    list [info commands foo] [info commands bar] [info commands someothername]
} {{} {} {}}

test trace-20.12 {delete trace renames command} {
    set info {}
    proc foo {} {}
    catch {rename bar {}}
    catch {rename someothername {}}
    trace add command foo delete [list traceCmdrename foo]
    rename foo bar
    rename bar {}
    # None of these should exist.
    list [info commands foo] [info commands bar] [info commands someothername]
} {{} {} {}}

test trace-20.13 {rename trace discards result [Bug 1355342]} {
    proc foo {} {}
    trace add command foo rename {set w Aha!;#}
    list [rename foo bar] [rename bar {}]
} {{} {}}
test trace-20.14 {rename trace discards error result [Bug 1355342]} {
    proc foo {} {}
    trace add command foo rename {error}
    list [rename foo bar] [rename bar {}]
} {{} {}}
test trace-20.15 {delete trace discards result [Bug 1355342]} {
    proc foo {} {}
    trace add command foo delete {set w Aha!;#}
    rename foo {}
} {}
test trace-20.16 {delete trace discards error result [Bug 1355342]} {
    proc foo {} {}
    trace add command foo delete {error}
    rename foo {}
} {}


proc foo {b} { set a $b }


# Delete arrays when done, so they can be re-used as scalars
# elsewhere.

unset -nocomplain x y

# Delete procedures when done, so we don't clash with other tests
# (e.g. foobar will clash with 'unknown' tests).
catch {rename foobar {}}
catch {rename foo {}}
catch {rename bar {}}

proc foo {a} {
    set b $a
}

proc traceExecute {args} {
    global info
    lappend info $args
}

test trace-21.1 {trace execution: enter} {
    set info {}
    trace add execution foo enter [list traceExecute foo]
    foo 1
    trace remove execution foo enter [list traceExecute foo]
    set info
} {{foo {foo 1} enter}}

test trace-21.2 {trace exeuction: leave} {
    set info {}
    trace add execution foo leave [list traceExecute foo]
    foo 2
    trace remove execution foo leave [list traceExecute foo]
    set info
} {{foo {foo 2} 0 2 leave}}

test trace-21.3 {trace exeuction: enter, leave} {
    set info {}
    trace add execution foo {enter leave} [list traceExecute foo]
    foo 3
    trace remove execution foo {enter leave} [list traceExecute foo]
    set info
} {{foo {foo 3} enter} {foo {foo 3} 0 3 leave}}

test trace-21.4 {trace execution: enter, leave, enterstep} {
    set info {}
    trace add execution foo {enter leave enterstep} [list traceExecute foo]
    foo 3
    trace remove execution foo {enter leave enterstep} [list traceExecute foo]
    set info
} {{foo {foo 3} enter} {foo {set b 3} enterstep} {foo {foo 3} 0 3 leave}}

test trace-21.5 {trace execution: enter, leave, enterstep, leavestep} {
    set info {}
    trace add execution foo {enter leave enterstep leavestep} [list traceExecute foo]
    foo 3
    trace remove execution foo {enter leave enterstep leavestep} [list traceExecute foo]
    set info
} {{foo {foo 3} enter} {foo {set b 3} enterstep} {foo {set b 3} 0 3 leavestep} {foo {foo 3} 0 3 leave}}

test trace-21.6 {trace execution: enterstep, leavestep} {
    set info {}
    trace add execution foo {enterstep leavestep} [list traceExecute foo]
    foo 3
    trace remove execution foo {enterstep leavestep} [list traceExecute foo]
    set info
} {{foo {set b 3} enterstep} {foo {set b 3} 0 3 leavestep}}

test trace-21.7 {trace execution: enterstep} {
    set info {}
    trace add execution foo {enterstep} [list traceExecute foo]
    foo 3
    trace remove execution foo {enterstep} [list traceExecute foo]
    set info
} {{foo {set b 3} enterstep}}

test trace-21.8 {trace execution: leavestep} {
    set info {}
    trace add execution foo {leavestep} [list traceExecute foo]
    foo 3
    trace remove execution foo {leavestep} [list traceExecute foo]
    set info
} {{foo {set b 3} 0 3 leavestep}}

test trace-21.9 {trace execution: TCL_EVAL_GLOBAL} testevalobjv {
    trace add execution foo enter soom
    proc ::soom args {lappend ::info SUCCESS [info level]}
    set ::info {}
    namespace eval test_ns_1 {
        proc soom args {lappend ::info FAIL [info level]}
        # [testevalobjv 1 ...] ought to produce the same
       # results as [uplevel #0 ...].
        testevalobjv 1 foo x
       uplevel #0 foo x
    }
    namespace delete test_ns_1
    trace remove execution foo enter soom
    set ::info
} {SUCCESS 1 SUCCESS 1}

test trace-21.10 {trace execution: TCL_EVAL_GLOBAL} testevalobjv {
    trace add execution foo leave soom
    proc ::soom args {lappend ::info SUCCESS [info level]}
    set ::info {}
    namespace eval test_ns_1 {
        proc soom args {lappend ::info FAIL [info level]}
        # [testevalobjv 1 ...] ought to produce the same
       # results as [uplevel #0 ...].
        testevalobjv 1 foo x
       uplevel #0 foo x
    }
    namespace delete test_ns_1
    trace remove execution foo leave soom
    set ::info
} {SUCCESS 1 SUCCESS 1}

test trace-21.11 {trace execution and alias} -setup {
    set res {}
    proc ::x {} {return ::}
    namespace eval a {}
    proc ::a::x {} {return ::a}
    interp alias {} y {} x
} -body {
    lappend res [namespace eval ::a y]
    trace add execution ::x enter {
      rename ::x {}
	proc ::x {} {return ::}
    #}
    lappend res [namespace eval ::a y]
} -cleanup {
    namespace delete a
    rename ::x {}
} -result {:: ::}

proc set2 args {
    set {*}$args
}

test trace-21.12 {bug 2438181} -setup {
    trace add execution set2 leave {puts one two three #;}
} -body {
    set2 a hello
} -returnCodes 1 -result {wrong # args: should be "puts ?-nonewline? ?channelId? string"}

proc factorial {n} {
    if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }
    return 1
}

test trace-22.1 {recursive(1) trace execution: enter} {
    set info {}
    trace add execution factorial {enter} [list traceExecute factorial]
    factorial 1
    trace remove execution factorial {enter} [list traceExecute factorial]
    set info
} {{factorial {factorial 1} enter}}

test trace-22.2 {recursive(2) trace execution: enter} {
    set info {}
    trace add execution factorial {enter} [list traceExecute factorial]
    factorial 2
    trace remove execution factorial {enter} [list traceExecute factorial]
    set info
} {{factorial {factorial 2} enter} {factorial {factorial 1} enter}}

test trace-22.3 {recursive(3) trace execution: enter} {
    set info {}
    trace add execution factorial {enter} [list traceExecute factorial]
    factorial 3
    trace remove execution factorial {enter} [list traceExecute factorial]
    set info
} {{factorial {factorial 3} enter} {factorial {factorial 2} enter} {factorial {factorial 1} enter}}

test trace-23.1 {recursive(1) trace execution: enter, leave, enterstep, leavestep} {
    set info {}
    trace add execution factorial {enter leave enterstep leavestep} [list traceExecute]
    factorial 1
    trace remove execution factorial {enter leave enterstep leavestep} [list traceExecute]
    join $info "\n"
} {{factorial 1} enter
{if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }} enterstep
{if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }} 0 {} leavestep
{return 1} enterstep
{return 1} 2 1 leavestep
{factorial 1} 0 1 leave}

test trace-23.2 {recursive(2) trace execution: enter, leave, enterstep, leavestep} {
    set info {}
    trace add execution factorial {enter leave enterstep leavestep} [list traceExecute]
    factorial 2
    trace remove execution factorial {enter leave enterstep leavestep} [list traceExecute]
    join $info "\n"
} {{factorial 2} enter
{if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }} enterstep
{expr {$n * [factorial [expr {$n -1 }]]}} enterstep
{expr {$n -1 }} enterstep
{expr {$n -1 }} 0 1 leavestep
{factorial 1} enterstep
{factorial 1} enter
{if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }} enterstep
{if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }} 0 {} leavestep
{return 1} enterstep
{return 1} 2 1 leavestep
{factorial 1} 0 1 leave
{factorial 1} 0 1 leavestep
{expr {$n * [factorial [expr {$n -1 }]]}} 0 2 leavestep
{return 2} enterstep
{return 2} 2 2 leavestep
{if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }} 2 2 leavestep
{factorial 2} 0 2 leave}

test trace-23.3 {recursive(3) trace execution: enter, leave, enterstep, leavestep} {
    set info {}
    trace add execution factorial {enter leave enterstep leavestep} [list traceExecute]
    factorial 3
    trace remove execution factorial {enter leave enterstep leavestep} [list traceExecute]
    join $info "\n"
} {{factorial 3} enter
{if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }} enterstep
{expr {$n * [factorial [expr {$n -1 }]]}} enterstep
{expr {$n -1 }} enterstep
{expr {$n -1 }} 0 2 leavestep
{factorial 2} enterstep
{factorial 2} enter
{if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }} enterstep
{expr {$n * [factorial [expr {$n -1 }]]}} enterstep
{expr {$n -1 }} enterstep
{expr {$n -1 }} 0 1 leavestep
{factorial 1} enterstep
{factorial 1} enter
{if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }} enterstep
{if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }} 0 {} leavestep
{return 1} enterstep
{return 1} 2 1 leavestep
{factorial 1} 0 1 leave
{factorial 1} 0 1 leavestep
{expr {$n * [factorial [expr {$n -1 }]]}} 0 2 leavestep
{return 2} enterstep
{return 2} 2 2 leavestep
{if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }} 2 2 leavestep
{factorial 2} 0 2 leave
{factorial 2} 0 2 leavestep
{expr {$n * [factorial [expr {$n -1 }]]}} 0 6 leavestep
{return 6} enterstep
{return 6} 2 6 leavestep
{if {$n != 1} { return [expr {$n * [factorial [expr {$n -1 }]]}] }} 2 6 leavestep
{factorial 3} 0 6 leave}

proc traceDelete {cmd args} {
    trace remove execution $cmd {*}[lindex [trace info execution $cmd] 0]
    global info
    set info $args
}

test trace-24.1 {delete trace during enter trace} {
    set info {}
    trace add execution foo enter [list traceDelete foo]
    foo 1
    list $info [catch {trace info execution foo} res] $res
} {{{foo 1} enter} 0 {}}

test trace-24.2 {delete trace during leave trace} {
    set info {}
    trace add execution foo leave [list traceDelete foo]
    foo 1
    list $info [catch {trace info execution foo} res] $res
} {{{foo 1} 0 1 leave} 0 {}}

test trace-24.3 {delete trace during enter-leave trace} {
    set info {}
    trace add execution foo {enter leave} [list traceDelete foo]
    foo 1
    list $info [catch {trace info execution foo} res] $res
} {{{foo 1} enter} 0 {}}

test trace-24.4 {delete trace during all exec traces} {
    set info {}
    trace add execution foo {enter leave enterstep leavestep} [list traceDelete foo]
    foo 1
    list $info [catch {trace info execution foo} res] $res
} {{{foo 1} enter} 0 {}}

test trace-24.5 {delete trace during all exec traces except enter} {
    set info {}
    trace add execution foo {leave enterstep leavestep} [list traceDelete foo]
    foo 1
    list $info [catch {trace info execution foo} res] $res
} {{{set b 1} enterstep} 0 {}}

proc traceDelete {cmd args} {
    rename $cmd {}
    global info
    set info $args
}

proc foo {a} {
    set b $a
}

test trace-25.1 {delete command during enter trace} {
    set info {}
    trace add execution foo enter [list traceDelete foo]
    catch {foo 1} err
    list $err $info [catch {trace info execution foo} res] $res
} {{invalid command name "foo"} {{foo 1} enter} 1 {unknown command "foo"}}

proc foo {a} {
    set b $a
}

test trace-25.2 {delete command during leave trace} {
    set info {}
    trace add execution foo leave [list traceDelete foo]
    foo 1
    list $info [catch {trace info execution foo} res] $res
} {{{foo 1} 0 1 leave} 1 {unknown command "foo"}}

proc foo {a} {
    set b $a
}

test trace-25.3 {delete command during enter then leave trace} {
    set info {}
    trace add execution foo enter [list traceDelete foo]
    trace add execution foo leave [list traceDelete foo]
    catch {foo 1} err
    list $err $info [catch {trace info execution foo} res] $res
} {{invalid command name "foo"} {{foo 1} enter} 1 {unknown command "foo"}}

proc foo {a} {
    set b $a
}
proc traceExecute2 {args} {
    global info
    lappend info $args
}

# This shows the peculiar consequences of having two traces
# at the same time: as well as tracing the procedure you want
test trace-25.4 {order dependencies of two enter traces} {
    set info {}
    trace add execution foo enter [list traceExecute traceExecute]
    trace add execution foo enter [list traceExecute2 traceExecute2]
    catch {foo 1} err
    trace remove execution foo enter [list traceExecute traceExecute]
    trace remove execution foo enter [list traceExecute2 traceExecute2]
    join [list $err [join $info \n] [trace info execution foo]] "\n"
} {1
traceExecute2 {foo 1} enter
traceExecute {foo 1} enter
}

test trace-25.5 {order dependencies of two step traces} {
    set info {}
    trace add execution foo enterstep [list traceExecute traceExecute]
    trace add execution foo enterstep [list traceExecute2 traceExecute2]
    catch {foo 1} err
    trace remove execution foo enterstep [list traceExecute traceExecute]
    trace remove execution foo enterstep [list traceExecute2 traceExecute2]
    join [list $err [join $info \n] [trace info execution foo]] "\n"
} {1
traceExecute2 {set b 1} enterstep
traceExecute {set b 1} enterstep
}

# We don't want the result string (5th argument), or the results
# will get unmanageable.
proc tracePostExecute {args} {
    global info
    lappend info [concat [lrange $args 0 2] [lindex $args 4]]
}
proc tracePostExecute2 {args} {
    global info
    lappend info [concat [lrange $args 0 2] [lindex $args 4]]
}

test trace-25.6 {order dependencies of two leave traces} {
    set info {}
    trace add execution foo leave [list tracePostExecute tracePostExecute]
    trace add execution foo leave [list tracePostExecute2 tracePostExecute2]
    catch {foo 1} err
    trace remove execution foo leave [list tracePostExecute tracePostExecute]
    trace remove execution foo leave [list tracePostExecute2 tracePostExecute2]
    join [list $err [join $info \n] [trace info execution foo]] "\n"
} {1
tracePostExecute {foo 1} 0 leave
tracePostExecute2 {foo 1} 0 leave
}

test trace-25.7 {order dependencies of two leavestep traces} {
    set info {}
    trace add execution foo leavestep [list tracePostExecute tracePostExecute]
    trace add execution foo leavestep [list tracePostExecute2 tracePostExecute2]
    catch {foo 1} err
    trace remove execution foo leavestep [list tracePostExecute tracePostExecute]
    trace remove execution foo leavestep [list tracePostExecute2 tracePostExecute2]
    join [list $err [join $info \n] [trace info execution foo]] "\n"
} {1
tracePostExecute {set b 1} 0 leavestep
tracePostExecute2 {set b 1} 0 leavestep
}

proc foo {a} {
    set b $a
}

proc traceDelete {cmd args} {
    rename $cmd {}
    global info
    set info $args
}

test trace-25.8 {delete command during enter leave and enter/leave-step traces} {
    set info {}
    trace add execution foo enter [list traceDelete foo]
    trace add execution foo leave [list traceDelete foo]
    trace add execution foo enterstep [list traceDelete foo]
    trace add execution foo leavestep [list traceDelete foo]
    catch {foo 1} err
    list $err $info [catch {trace info execution foo} res] $res
} {{invalid command name "foo"} {{foo 1} enter} 1 {unknown command "foo"}}

proc foo {a} {
    set b $a
}

test trace-25.9 {delete command during enter leave and leavestep traces} {
    set info {}
    trace add execution foo enter [list traceDelete foo]
    trace add execution foo leave [list traceDelete foo]
    trace add execution foo leavestep [list traceDelete foo]
    catch {foo 1} err
    list $err $info [catch {trace info execution foo} res] $res
} {{invalid command name "foo"} {{foo 1} enter} 1 {unknown command "foo"}}

proc foo {a} {
    set b $a
}

test trace-25.10 {delete command during leave and leavestep traces} {
    set info {}
    trace add execution foo leave [list traceDelete foo]
    trace add execution foo leavestep [list traceDelete foo]
    catch {foo 1} err
    list $err $info [catch {trace info execution foo} res] $res
} {1 {{set b 1} 0 1 leavestep} 1 {unknown command "foo"}}

proc foo {a} {
    set b $a
}

test trace-25.11 {delete command during enter and enterstep traces} {
    set info {}
    trace add execution foo enter [list traceDelete foo]
    trace add execution foo enterstep [list traceDelete foo]
    catch {foo 1} err
    list $err $info [catch {trace info execution foo} res] $res
} {{invalid command name "foo"} {{foo 1} enter} 1 {unknown command "foo"}}

test trace-26.1 {trace targetCmd when invoked through an alias} {
    proc foo {args} {
	set b $args
    }
    set info {}
    trace add execution foo enter [list traceExecute foo]
    interp alias {} bar {} foo 1
    bar 2
    trace remove execution foo enter [list traceExecute foo]
    set info
} {{foo {foo 1 2} enter}}
test trace-26.2 {trace targetCmd when invoked through an alias} {
    proc foo {args} {
	set b $args
    }
    set info {}
    trace add execution foo enter [list traceExecute foo]
    interp create child
    interp alias child bar {} foo 1
    child eval bar 2
    interp delete child
    trace remove execution foo enter [list traceExecute foo]
    set info
} {{foo {foo 1 2} enter}}

test trace-27.1 {memory leak in rename trace (604609)} {
    catch {rename bar {}}
    proc foo {} {error foo}
    trace add command foo rename {rename foo "" ;#}
    rename foo bar
    info commands foo
} {}

test trace-27.2 {command trace remove nonsense} {
    list [catch {trace remove command thisdoesntexist \
      {delete rename} bar} res] $res
} {1 {unknown command "thisdoesntexist"}}

test trace-27.3 {command trace info nonsense} {
    list [catch {trace info command thisdoesntexist} res] $res
} {1 {unknown command "thisdoesntexist"}}


test trace-28.1 {enterstep and leavestep traces with update idletasks (615043)} {
    catch {rename foo {}}
    proc foo {} {
        set a 1
        update idletasks
        set b 1
    }

    set info {}
    trace add execution foo {enter enterstep leavestep leave} \
        [list traceExecute foo]
    update
    after idle {set a "idle"}
    foo

    trace remove execution foo {enter enterstep leavestep leave} \
        [list traceExecute foo]
    rename foo {}
    unset -nocomplain a
    join $info "\n"
} {foo foo enter
foo {set a 1} enterstep
foo {set a 1} 0 1 leavestep
foo {update idletasks} enterstep
foo {set a idle} enterstep
foo {set a idle} 0 idle leavestep
foo {update idletasks} 0 {} leavestep
foo {set b 1} enterstep
foo {set b 1} 0 1 leavestep
foo foo 0 1 leave}

test trace-28.2 {exec traces with 'error'} {
    set info {}
    set res {}
    
    proc foo {} {
	if {[catch {bar}]} {
	    return "error"
	} else {
	    return "ok"
	}
    }

    proc bar {} { error "msg" }

    lappend res [foo]

    trace add execution foo {enter enterstep leave leavestep} \
      [list traceExecute foo]

    # With the trace active

    lappend res [foo]

    trace remove execution foo {enter enterstep leave leavestep} \
      [list traceExecute foo]
    
    list $res [join $info \n]
} {{error error} {foo foo enter
foo {if {[catch {bar}]} {
	    return "error"
	} else {
	    return "ok"
	}} enterstep
foo {catch bar} enterstep
foo bar enterstep
foo {error msg} enterstep
foo {error msg} 1 msg leavestep
foo bar 1 msg leavestep
foo {catch bar} 0 1 leavestep
foo {return error} enterstep
foo {return error} 2 error leavestep
foo {if {[catch {bar}]} {
	    return "error"
	} else {
	    return "ok"
	}} 2 error leavestep
foo foo 0 error leave}}

test trace-28.3 {exec traces with 'return -code error'} {
    set info {}
    set res {}
    
    proc foo {} {
	if {[catch {bar}]} {
	    return "error"
	} else {
	    return "ok"
	}
    }

    proc bar {} { return -code error "msg" }

    lappend res [foo]

    trace add execution foo {enter enterstep leave leavestep} \
      [list traceExecute foo]

    # With the trace active

    lappend res [foo]

    trace remove execution foo {enter enterstep leave leavestep} \
      [list traceExecute foo]
    
    list $res [join $info \n]
} {{error error} {foo foo enter
foo {if {[catch {bar}]} {
	    return "error"
	} else {
	    return "ok"
	}} enterstep
foo {catch bar} enterstep
foo bar enterstep
foo {return -code error msg} enterstep
foo {return -code error msg} 2 msg leavestep
foo bar 1 msg leavestep
foo {catch bar} 0 1 leavestep
foo {return error} enterstep
foo {return error} 2 error leavestep
foo {if {[catch {bar}]} {
	    return "error"
	} else {
	    return "ok"
	}} 2 error leavestep
foo foo 0 error leave}}

test trace-28.4 {exec traces in child with 'return -code error'} {
    interp create child
    interp alias child traceExecute {} traceExecute
    set info {}
    set res [interp eval child {
	set info {}
	set res {}
	
	proc foo {} {
	    if {[catch {bar}]} {
		return "error"
	    } else {
		return "ok"
	    }
	}
	
	proc bar {} { return -code error "msg" }
	
	lappend res [foo]
	
	trace add execution foo {enter enterstep leave leavestep} \
	  [list traceExecute foo]
	
	# With the trace active
	
	lappend res [foo]
	
	trace remove execution foo {enter enterstep leave leavestep} \
	  [list traceExecute foo]
	
	list $res
    }]
    interp delete child
    lappend res [join $info \n]
} {{error error} {foo foo enter
foo {if {[catch {bar}]} {
		return "error"
	    } else {
		return "ok"
	    }} enterstep
foo {catch bar} enterstep
foo bar enterstep
foo {return -code error msg} enterstep
foo {return -code error msg} 2 msg leavestep
foo bar 1 msg leavestep
foo {catch bar} 0 1 leavestep
foo {return error} enterstep
foo {return error} 2 error leavestep
foo {if {[catch {bar}]} {
		return "error"
	    } else {
		return "ok"
	    }} 2 error leavestep
foo foo 0 error leave}}

test trace-28.5 {exec traces} {
    set info {}
    proc foo {args} { set a 1 }
    trace add execution foo {enter enterstep leave leavestep} \
      [list traceExecute foo]
    after idle [list foo test-28.4]
    update
    # Complicated way of removing traces
    set ti [lindex [eval [list trace info execution ::foo]] 0]
    if {[llength $ti]} {
	eval [concat [list trace remove execution foo] $ti]
    }
    join $info \n
} {foo {foo test-28.4} enter
foo {set a 1} enterstep
foo {set a 1} 0 1 leavestep
foo {foo test-28.4} 0 1 leave}

test trace-28.6 {exec traces firing order} {
    set info {}
    proc enterStep {cmd op} {lappend ::info "enter $cmd/$op"}
    proc leaveStep {cmd code result op} {lappend ::info "leave $cmd/$code/$result/$op"}

    proc foo x {
	set b x=$x
	incr x
    }
    trace add execution foo enterstep enterStep
    trace add execution foo leavestep leaveStep
    foo 42
    rename foo {}
    join $info \n
} {enter set b x=42/enterstep
leave set b x=42/0/x=42/leavestep
enter incr x/enterstep
leave incr x/0/43/leavestep}

test trace-28.7 {exec trace information} {
    set info {}
    proc foo x { incr x }
    proc bar {args} {}
    trace add execution foo {enter leave enterstep leavestep} bar
    set info [trace info execution foo]
    trace remove execution foo {enter leave enterstep leavestep} bar
} {}

test trace-28.8 {exec trace remove nonsense} {
    list [catch {trace remove execution thisdoesntexist \
      {enter leave enterstep leavestep} bar} res] $res
} {1 {unknown command "thisdoesntexist"}}

test trace-28.9 {exec trace info nonsense} {
    list [catch {trace info execution thisdoesntexist} res] $res
} {1 {unknown command "thisdoesntexist"}}

test trace-28.10 {exec trace info nonsense} {
    list [catch {trace remove execution} res] $res
} {1 {wrong # args: should be "trace remove execution name opList command"}}

test trace-29.1 {Tcl_CreateTrace, correct command and argc/argv arguments of trace proc} {testcmdtrace} {
    testcmdtrace tracetest {set stuff [expr 14 + 16]}
} {{expr 14 + 16} {expr 14 + 16} {set stuff [expr 14 + 16]} {set stuff 30}}
test trace-29.2 {Tcl_CreateTrace, correct command and argc/argv arguments of trace proc} {testcmdtrace} {
    testcmdtrace tracetest {set stuff [info tclversion]}
} [concat {{info tclversion} {info tclversion} ::tcl::info::tclversion {::tcl::info::tclversion} {set stuff [info tclversion]}} [list "set stuff [info tclversion]"]]
test trace-29.3 {Tcl_CreateTrace, correct command and argc/argv arguments of trace proc} {testcmdtrace} {
    testcmdtrace deletetest {set stuff [info tclversion]}
} [info tclversion]
test trace-29.4 {Tcl_CreateTrace, check that tracing doesn't cause memory faults} {testcmdtrace} {
    # Note that the proc call is the same as the variable name, and that
    # the call can be direct or indirect by way of another procedure
    proc tracer {args} {}
    proc tracedLoop {level} {
	incr level
	tracer
	foreach tracer [expr {$level==1 ? {1 2} : {}}] {tracedLoop $level}
    }
    testcmdtrace tracetest {tracedLoop 0}
} {{tracedLoop 0} {tracedLoop 0} {incr level} {incr level} tracer {tracer} {expr {$level==1 ? {1 2} : {}}} {expr {$level==1 ? {1 2} : {}}} {foreach tracer [expr {$level==1 ? {1 2} : {}}] {tracedLoop $level}} {foreach tracer {1 2} {tracedLoop $level}} {tracedLoop $level} {tracedLoop 1} {incr level} {incr level} tracer {tracer} {expr {$level==1 ? {1 2} : {}}} {expr {$level==1 ? {1 2} : {}}} {foreach tracer [expr {$level==1 ? {1 2} : {}}] {tracedLoop $level}} {foreach tracer {} {tracedLoop $level}} {tracedLoop $level} {tracedLoop 1} {incr level} {incr level} tracer {tracer} {expr {$level==1 ? {1 2} : {}}} {expr {$level==1 ? {1 2} : {}}} {foreach tracer [expr {$level==1 ? {1 2} : {}}] {tracedLoop $level}} {foreach tracer {} {tracedLoop $level}}}
catch {rename tracer {}}
catch {rename tracedLoop {}}

test trace-29.5 {Tcl_CreateObjTrace, status return TCL_ERROR} {testcmdtrace} {
    proc Error { args } { error "Shouldn't get here" }
    set x 1;
    list [catch {testcmdtrace resulttest {Error $x}} result] [set result]
} {1 {Error $x}}

test trace-29.6 {Tcl_CreateObjTrace, status return TCL_RETURN} {testcmdtrace} {
    proc Return { args } { error "Shouldn't get here" }
    set x 1;
    list [catch {testcmdtrace resulttest {Return $x}} result] [set result]
} {2 {}}

test trace-29.7 {Tcl_CreateObjTrace, status return TCL_BREAK} {testcmdtrace} {
    proc Break { args } { error "Shouldn't get here" }
    set x 1;
    list [catch {testcmdtrace resulttest {Break $x}} result] [set result]
} {3 {}}

test trace-29.8 {Tcl_CreateObjTrace, status return TCL_CONTINUE} {testcmdtrace} {
    proc Continue { args } { error "Shouldn't get here" }
    set x 1;
    list [catch {testcmdtrace resulttest {Continue $x}} result] [set result]
} {4 {}}

test trace-29.9 {Tcl_CreateObjTrace, status return unknown} {testcmdtrace} {
    proc OtherStatus { args } { error "Shouldn't get here" }
    set x 1;
    list [catch {testcmdtrace resulttest {OtherStatus $x}} result] [set result]
} {6 {}}

test trace-29.10 {Tcl_CreateTrace, correct level interpretation} {testcmdtrace} {
    proc foo {} {uplevel 1 bar}
    proc bar {} {uplevel 1 grok}
    proc grok {} {uplevel 1 spock}
    proc spock {} {uplevel 1 fascinating}
    proc fascinating {} {}
    testcmdtrace leveltest {foo}
} {foo {foo} {uplevel 1 bar} {uplevel 1 bar} bar {bar} {uplevel 1 grok} {uplevel 1 grok}}

test trace-29.11 {Tcl_CreateTrace, multiple traces} {testcmdtrace} {
    testcmdtrace doubletest {format xx}
} {{format xx} {format xx}}

test trace-30.1 {Tcl_DeleteTrace} {emptyTest} {
    # the above tests have tested Tcl_DeleteTrace
} {}

test trace-31.1 {command and execution traces shared struct} {
    # Tcl Bug 807243
    proc foo {} {}
    trace add command foo delete foo
    trace add execution foo enter foo
    set result [trace info command foo]
    trace remove command foo delete foo
    trace remove execution foo enter foo
    rename foo {}
    set result
} [list [list delete foo]]
test trace-31.2 {command and execution traces shared struct} {
    # Tcl Bug 807243
    proc foo {} {}
    trace add command foo delete foo
    trace add execution foo enter foo
    set result [trace info execution foo]
    trace remove command foo delete foo
    trace remove execution foo enter foo
    rename foo {}
    set result
} [list [list enter foo]]

test trace-32.1 {
    TraceCommandInfo refcount decr in TraceCommandProc w/o loss of reference
} {
    # Tcl Bug 811483
    proc foo {} {}
    trace add command foo delete foo
    trace add execution foo enter foo
    set result [trace info command foo]
    rename foo {}
    set result
} [list [list delete foo]]

test trace-33.1 {variable match with remove variable} {
    unset -nocomplain x
    trace variable x w foo
    trace remove variable x write foo
    llength [trace info variable x]
} 0

test trace-34.1 {Bug 1201035} {
    set ::x [list]
    proc foo {} {lappend ::x foo}
    proc bar args {
        lappend ::x $args
        trace remove execution foo leavestep bar
        trace remove execution foo enterstep bar
        trace add execution foo leavestep bar
        trace add execution foo enterstep bar
        lappend ::x done
    }
    trace add execution foo leavestep bar
    trace add execution foo enterstep bar
    foo
    set ::x
} {{{lappend ::x foo} enterstep} done foo}

test trace-34.2 {Bug 1224585} {
    proc foo {} {}
    proc bar args {trace remove execution foo leave soom}
    trace add execution foo leave bar
    trace add execution foo leave soom
    foo
} {}

test trace-34.3 {Bug 1224585} {
    proc foo {} {set x {}}
    proc bar args {trace remove execution foo enterstep soom}
    trace add execution foo enterstep soom
    trace add execution foo enterstep bar
    foo
} {}

# We test here for the half-documented and currently valid interplay between
# delete traces and namespace deletion.
test trace-34.4 {Bug 1047286} {
    variable x notrace
    proc callback {old - -} {
        variable x "$old exists: [namespace which -command $old]"
    }
    namespace eval ::foo {proc bar {} {}}
    trace add command ::foo::bar delete [namespace code callback]
    namespace delete ::foo
    set x
} {::foo::bar exists: ::foo::bar}

test trace-34.5 {Bug 1047286} {
    variable x notrace
    proc callback {old - -} {
        variable x "$old exists: [namespace which -command $old]"
    }
    namespace eval ::foo {proc bar {} {}}
    trace add command ::foo::bar delete [namespace code callback]
    namespace eval ::foo namespace delete ::foo
    set x
} {::foo::bar exists: }

test trace-34.6 {Bug 1458266} -setup {
    proc dummy {} {}
    proc stepTraceHandler {cmdString args} {
        variable log
        append log "[expr {[info level] - 1}]: [lindex [split $cmdString] 0]\n"
        dummy
        isTracedInside_2
    }
    proc cmdTraceHandler {cmdString args} {
        # silent
    }
    proc isTracedInside_1 {} {
        isTracedInside_2
    }
    proc isTracedInside_2 {} {
        set x 2
    }
} -body {
    variable log {}
    trace add execution isTracedInside_1 enterstep stepTraceHandler
    trace add execution isTracedInside_2 enterstep stepTraceHandler
    isTracedInside_1
    variable first $log
    set log {}
    trace add execution dummy enter cmdTraceHandler
    isTracedInside_1
    variable second $log
    expr {($first eq $second) ? "ok" : "\n$first\nand\n\n$second\ndiffer"}
} -cleanup {
    unset -nocomplain log first second
    rename dummy {}
    rename stepTraceHandler {}
    rename cmdTraceHandler {}
    rename isTracedInside_1 {}
    rename isTracedInside_2 {}
} -result ok

test trace-35.1 {527164: Keep -errorinfo of traces} -setup {
    unset -nocomplain x y
} -body {
    trace add variable x write {error foo;#}
    trace add variable y write {set x 2;#}
    list [catch {set y 1} msg opts] $msg [dict get $opts -errorinfo]
} -cleanup {
    unset -nocomplain x y
} -result {1 {can't set "y": can't set "x": foo} {foo
    while executing
"error foo"
    (write trace on "x")
    invoked from within
"set x 2"
    (write trace on "y")
    invoked from within
"set y 1"}}


#
# Test for the correct(?) dynamics of execution traces. This test insures that
# the dynamics of the original implementation remain valid; note that
# these aspects are neither documented nor do they appear in TIP 62

proc traceproc {tracevar args} {
    append ::$tracevar *
}
proc untraced {type} {
    trace add execution untraced $type {traceproc tracevar}
    append ::tracevar -
}
proc runbase {results base} {
    set tt {enter leave enterstep leavestep}
    foreach n {1 2 3 4} t $tt r $results {
	eval [subst $base]
    }
}
set base {
    test trace-36.$n {dynamic trace creation: $t} -setup {
	set ::tracevar {}
    } -cleanup {
	unset ::tracevar
	trace remove execution untraced $t {traceproc tracevar}
    } -body {
	untraced $t
	set ::tracevar
    } -result {$r}
}
runbase {- - - -} $base

set base {
    test trace-37.$n {dynamic trace addition: $t} -setup {
	set ::tracevar {}
	set ::tracevar2 {}
	trace add execution untraced enter {traceproc tracevar2}
    } -cleanup {
	trace remove execution untraced $t {traceproc tracevar}
	trace remove execution untraced enter {traceproc tracevar2}
	unset ::tracevar ::tracevar2
    } -body {
	untraced $t
	list \$::tracevar \$::tracevar2
    } -result {$r}
}
runbase {{- *} {-* *} {- *} {- *}} $base

set base {
    test trace-38.$n {dynamic trace addition: $t} -setup {
	set ::tracevar {}
	set ::tracevar2 {}
	trace add execution untraced leave {traceproc tracevar2}
    } -cleanup {
	trace remove execution untraced $t {traceproc tracevar}
	trace remove execution untraced leave {traceproc tracevar2}
	unset ::tracevar ::tracevar2
    } -body {
	untraced $t
	list \$::tracevar \$::tracevar2
    } -result {$r}
}
runbase {{- *} {-* *} {- *} {- *}} $base

test trace-39 {bug #3484621: tracing Bc'ed commands} -setup {
    set ::traceLog 0
    set ::traceCalls 0
    set ::bar [list 0 1 2 3]
    set res {}
    proc dotrace args {
	incr ::traceLog
    }
    proc foo {} {
	incr ::traceCalls
	# choose a BC'ed command that is 'unlikely' to interfere with tcltest's
	# internals 
	lset ::bar 1 2
    }
} -body {
    foo
    lappend res $::traceLog

    trace add execution lset enter dotrace
    foo
    lappend res $::traceLog

    trace remove execution lset enter dotrace
    foo
    lappend res $::traceLog

    list $::traceCalls | {*}$res
} -cleanup {
    unset ::traceLog ::traceCalls ::bar res
    rename dotrace {}
    rename foo {}
} -result {3 | 0 1 1}
    
test trace-39.1 {bug #3485022: tracing Bc'ed commands} -setup {
    set ::traceLog 0
    set ::traceCalls 0
    set res {}
    proc dotrace args {
	incr ::traceLog
    }
    proc foo {} {
	incr ::traceCalls
	string equal zip zap
    }
} -body {
    foo
    lappend res $::traceLog

    trace add execution ::tcl::string::equal enter dotrace
    foo
    lappend res $::traceLog

    trace remove execution tcl::string::equal enter dotrace
    foo
    lappend res $::traceLog

    list $::traceCalls | {*}$res
} -cleanup {
    unset ::traceLog ::traceCalls res
    rename dotrace {}
    rename foo {}
} -result {3 | 0 1 1}

test trace-40.1 {execution trace errors become command errors} {
    proc foo args {}
    trace add execution foo enter {rename foo {}; error bar;#}
    catch foo m
    return -level 0 $m[unset m]
} bar
    
# Delete procedures when done, so we don't clash with other tests
# (e.g. foobar will clash with 'unknown' tests).
catch {rename foobar {}}
catch {rename foo {}}
catch {rename bar {}}
catch {rename untraced {}}
catch {rename traceproc {}}
catch {rename runbase {}}

# Unset the variable when done
unset -nocomplain info base

# cleanup
cleanupTests
return