# The file tests the functions in the tclUnixInit.c file.
#
# This file contains a collection of tests for one or more of the Tcl built-in
# commands.  Sourcing this file into Tcl runs the tests and generates output
# for errors.  No output means no errors were found.
#
# Copyright © 1997 Sun Microsystems, Inc.
# Copyright © 1998-1999 Scriptics Corporation.
#
# See the file "license.terms" for information on usage and redistribution of
# this file, and for a DISCLAIMER OF ALL WARRANTIES.

if {"::tcltest" ni [namespace children]} {
    package require tcltest 2.5
    namespace import -force ::tcltest::*
}
unset -nocomplain path
catch {set oldlang $env(LANG)}
set env(LANG) C

# Some tests require the testgetencpath command
testConstraint testgetencpath [llength [info commands testgetencpath]]

test unixInit-1.1 {TclpInitPlatform: ignore SIGPIPE} {unix stdio} {
    set x {}
    # Watch out for a race condition here.  If tcltest is too slow to start
    # then we'll kill it before it has a chance to set up its signal handler.
    set f [open "|[list [interpreter]]" w+]
    puts $f "puts hi"
    flush $f
    gets $f
    exec kill -PIPE [pid $f]
    lappend x [catch {close $f}]
    set f [open "|[list [interpreter]]" w+]
    puts $f "puts hi"
    flush $f
    gets $f
    exec kill [pid $f]
    lappend x [catch {close $f}]
    set x
} {0 1}
# This test is really a test of code in tclUnixChan.c, but the channels are
# set up as part of initialisation of the interpreter so the test seems to me
# to fit here as well as anywhere else.
test unixInit-1.2 {initialisation: standard channel type deduction} {unix stdio} {
    # pipe1 is a connection to a server that reports what port it starts on,
    # and delivers a constant string to the first client to connect to that
    # port before exiting.
    set pipe1 [open "|[list [interpreter]]" r+]
    puts $pipe1 {
	proc accept {channel host port} {
	    puts $channel {puts [chan configure stdin -peername]; exit}
	    close $channel
	    exit
	}
	puts [chan configure [socket -server accept -myaddr 127.0.0.1 0] -sockname]
	vwait forever \
	    }
    # Note the backslash above; this is important to make sure that the whole
    # string is read before an [exit] can happen...
    flush $pipe1
    set port [lindex [gets $pipe1] 2]
    set sock [socket localhost $port]
    # pipe2 is a connection to a Tcl interpreter that takes its orders from
    # the socket we hand it (i.e. the server we create above.)  These orders
    # will tell it to print out the details about the socket it is taking
    # instructions from, hopefully identifying it as a socket.  Which is what
    # this test is all about.
    set pipe2 [open "|[list [interpreter] <@$sock]" r]
    set result [gets $pipe2]
    # Clear any pending data; stops certain kinds of (non-important) errors
    chan configure $pipe1 -blocking 0; gets $pipe1
    chan configure $pipe2 -blocking 0; gets $pipe2
    # Close the pipes and the socket.
    close $pipe2
    close $pipe1
    catch {close $sock}
    # Can't use normal comparison, as hostname varies due to some
    # installations having a messed up /etc/hosts file.
    if {
	"127.0.0.1" eq [lindex $result 0] && $port == [lindex $result 2]
    } then {
	subst "OK"
    } else {
	subst "Expected: `[list 127.0.0.1 localhost $port]', Got `$result'"
    }
} {OK}

# The unixInit-2.* tests were written to test the internal routine,
# TclpInitLibraryPath.  That routine no longer does the things it used to do
# so those tests are obsolete.  Skip them.

skip [concat [skip] unixInit-2.*]

test unixInit-2.0 {TclpInitLibraryPath: setting tclDefaultEncodingDir} -constraints {
    testgetencpath
} -body {
    set origPath [testgetencpath]
    testsetencpath slappy
    set path [testgetencpath]
    testsetencpath $origPath
    set path
} -result {slappy}
test unixInit-2.1 {TclpInitLibraryPath: value of installLib, developLib} -setup {
    unset -nocomplain oldlibrary
    if {[info exists env(TCL_LIBRARY)]} {
	set oldlibrary $env(TCL_LIBRARY)
	unset env(TCL_LIBRARY)
    }
} -body {
    set path [getlibpath]
    set installLib lib/tcl[info tclversion]
    set developLib tcl[info patchlevel]/library
    set prefix [file dirname [file dirname [interpreter]]]
    list [string equal [lindex $path 0] $prefix/$installLib] \
	[string equal [lindex $path 4] [file dirname $prefix]/$developLib]
} -cleanup {
    if {[info exists oldlibrary]} {
	set env(TCL_LIBRARY) $oldlibrary
	unset oldlibrary
    }
} -result {1 1}
test unixInit-2.2 {TclpInitLibraryPath: TCL_LIBRARY} -setup {
    unset -nocomplain oldlibrary
    if {[info exists env(TCL_LIBRARY)]} {
	set oldlibrary $env(TCL_LIBRARY)
    }
} -body {
    # ((str != NULL) && (str[0] != '\x00'))
    set env(TCL_LIBRARY) sparkly
    lindex [getlibpath] 0
} -cleanup {
    unset -nocomplain env(TCL_LIBRARY)
    if {[info exists oldlibrary]} {
	set env(TCL_LIBRARY) $oldlibrary
	unset oldlibrary
    }
} -result "sparkly"
test unixInit-2.3 {TclpInitLibraryPath: TCL_LIBRARY wrong version} -setup {
    unset -nocomplain oldlibrary
    if {[info exists env(TCL_LIBRARY)]} {
	set oldlibrary $env(TCL_LIBRARY)
    }
} -body {
    # ((pathc > 0) && (strcasecmp(installLib + 4, pathv[pathc - 1]) != 0))
    set env(TCL_LIBRARY) /a/b/tcl1.7
    lrange [getlibpath] 0 1
} -cleanup {
    unset -nocomplain env(TCL_LIBRARY)
    if {[info exists oldlibrary]} {
	set env(TCL_LIBRARY) $oldlibrary
	unset oldlibrary
    }
} -result [list /a/b/tcl1.7 /a/b/tcl[info tclversion]]
test unixInit-2.4 {TclpInitLibraryPath: TCL_LIBRARY: INTL} -setup {
    if {[info exists env(TCL_LIBRARY)]} {
	set oldlibrary $env(TCL_LIBRARY)
    }
} -body {
    # Child process translates env variable from native encoding.
    set env(TCL_LIBRARY) "§"
    lindex [getlibpath] 0
} -cleanup {
    unset -nocomplain env(TCL_LIBRARY) env(LANG)
    if {[info exists oldlibrary]} {
	set env(TCL_LIBRARY) $oldlibrary
	unset oldlibrary
    }
} -result "§"
test unixInit-2.5 {TclpInitLibraryPath: compiled-in library path} {
    # cannot test
} {}
test unixInit-2.6 {TclpInitLibraryPath: executable relative} -setup {
    unset -nocomplain oldlibrary
    if {[info exists env(TCL_LIBRARY)]} {
	set oldlibrary $env(TCL_LIBRARY)
    }
    set env(TCL_LIBRARY) [info library]
    makeDirectory tmp
    makeDirectory [file join tmp sparkly]
    makeDirectory [file join tmp sparkly bin]
    file copy [interpreter] [file join [temporaryDirectory] tmp sparkly \
	    bin tcltest]
    makeDirectory [file join tmp sparkly lib]
    makeDirectory [file join tmp sparkly lib tcl[info tclversion]]
    makeFile {} [file join tmp sparkly lib tcl[info tclversion] init.tcl]
} -body {
    lrange [getlibpath [file join [temporaryDirectory] tmp sparkly \
	    bin tcltest]] 1 2
} -cleanup {
    removeFile [file join tmp sparkly lib tcl[info tclversion] init.tcl]
    removeDirectory [file join tmp sparkly lib tcl[info tclversion]]
    removeDirectory [file join tmp sparkly lib]
    removeDirectory [file join tmp sparkly bin]
    removeDirectory [file join tmp sparkly]
    removeDirectory tmp
    unset env(TCL_LIBRARY)
    if {[info exists oldlibrary]} {
	set env(TCL_LIBRARY) $oldlibrary
	unset oldlibrary
    }
} -result [list [temporaryDirectory]/tmp/sparkly/lib/tcl[info tclversion] [temporaryDirectory]/tmp/lib/tcl[info tclversion]]
test unixInit-2.7 {TclpInitLibraryPath: compiled-in library path} {
    # would need test command to get defaultLibDir and compare it to
    # [lindex $auto_path end]
} {}
#
# The following two tests write to the directory /tmp/sparkly instead of to
# [temporaryDirectory].  This is because the failures tested by these tests
# need paths near the "root" of the file system to present themselves.
#
test unixInit-2.8 {TclpInitLibraryPath: all absolute pathtype} -setup {
    unset -nocomplain oldlibrary
    if {[info exists env(TCL_LIBRARY)]} {
	set oldlibrary $env(TCL_LIBRARY)
    }
    set env(TCL_LIBRARY) [info library]
    # Checking for Bug 219416
    # When a program that embeds the Tcl library, like tcltest, is installed
    # near the "root" of the file system, there was a problem constructing
    # directories relative to the executable.  When a relative ".." went past
    # the root, relative path names were created rather than absolute
    # pathnames.  In some cases, accessing past the root caused memory access
    # violations too.
    #
    # The bug is now fixed, but here we check for it by making sure that the
    # directories constructed relative to the executable are all absolute
    # pathnames, even when the executable is installed near the root of the
    # filesystem.
    #
    # The only directory near the root we are likely to have write access to
    # is /tmp.
    file delete -force /tmp/sparkly
    file delete -force /tmp/lib/tcl[info tclversion]
    file mkdir /tmp/sparkly
    file copy [interpreter] /tmp/sparkly/tcltest
    # Keep any existing /tmp/lib directory
    set deletelib 1
    if {[file exists /tmp/lib]} {
	if {[file isdirectory /tmp/lib]} {
	    set deletelib 0
	} else {
	    file delete -force /tmp/lib
	}
    }
    # For a successful Tcl_Init, we need a [source]-able init.tcl in
    # ../lib/tcl$version relative to the executable.
    file mkdir /tmp/lib/tcl[info tclversion]
    close [open /tmp/lib/tcl[info tclversion]/init.tcl w]
} -body {
    # Check that all directories in the library path are absolute pathnames
    set allAbsolute 1
    foreach dir [getlibpath /tmp/sparkly/tcltest] {
	set allAbsolute [expr {$allAbsolute \
		&& [string equal absolute [file pathtype $dir]]}]
    }
    set allAbsolute
} -cleanup {
    # Clean up temporary installation
    file delete -force /tmp/sparkly
    file delete -force /tmp/lib/tcl[info tclversion]
    if {$deletelib} {file delete -force /tmp/lib}
    unset env(TCL_LIBRARY)
    if {[info exists oldlibrary]} {
	set env(TCL_LIBRARY) $oldlibrary
	unset oldlibrary
    }
} -result 1
test unixInit-2.9 {TclpInitLibraryPath: paths relative to executable} -setup {
    # Checking for Bug 438014
    unset -nocomplain oldlibrary
    if {[info exists env(TCL_LIBRARY)]} {
	set oldlibrary $env(TCL_LIBRARY)
    }
    set env(TCL_LIBRARY) [info library]
    file delete -force /tmp/sparkly
    file delete -force /tmp/library
    file mkdir /tmp/sparkly
    file copy [interpreter] /tmp/sparkly/tcltest
    file mkdir /tmp/library/
    close [open /tmp/library/init.tcl w]
} -body {
    lrange [getlibpath /tmp/sparkly/tcltest] 1 5
} -cleanup {
    file delete -force /tmp/sparkly
    file delete -force /tmp/library
    unset env(TCL_LIBRARY)
    if {[info exists oldlibrary]} {
	set env(TCL_LIBRARY) $oldlibrary
	unset oldlibrary
    }
} -result [list /tmp/lib/tcl[info tclversion] /lib/tcl[info tclversion] \
        /tmp/library /library /tcl[info patchlevel]/library]
test unixInit-2.10 {TclpInitLibraryPath: executable relative} -setup {
    unset -nocomplain oldlibrary
    if {[info exists env(TCL_LIBRARY)]} {
	set oldlibrary $env(TCL_LIBRARY)
    }
    set env(TCL_LIBRARY) [info library]
    set tmpDir [makeDirectory tmp]
    set sparklyDir [makeDirectory sparkly $tmpDir]
    set execPath [file join [makeDirectory bin $sparklyDir] tcltest]
    file copy [interpreter] $execPath
    set libDir [makeDirectory lib $sparklyDir]
    set scriptDir [makeDirectory tcl[info tclversion] $libDir]
    makeFile {} init.tcl $scriptDir
    set saveDir [pwd]
    cd $libDir
} -body {
    # Checking for Bug 832657
    set x [lrange [getlibpath [file join .. bin tcltest]] 3 4]
    foreach p $x {
	lappend y [file normalize $p]
    }
    set y
} -cleanup {
    cd $saveDir
    removeFile init.tcl $scriptDir
    removeDirectory tcl[info tclversion] $libDir
    file delete $execPath
    removeDirectory bin $sparklyDir
    removeDirectory lib $sparklyDir
    removeDirectory sparkly $tmpDir
    removeDirectory tmp
    unset -nocomplain saveDir scriptDir libDir execPath sparklyDir tmpDir
    unset -nocomplain x p y env(TCL_LIBRARY)
    if {[info exists oldlibrary]} {
	set env(TCL_LIBRARY) $oldlibrary
	unset oldlibrary
    }
} -result [list [file join [temporaryDirectory] tmp sparkly library] \
	[file join [temporaryDirectory] tmp library] ]

test unixInit-3.1 {TclpSetInitialEncodings} -constraints {
	unix stdio
} -body {
    set env(LANG) C
    set f [open "|[list [interpreter]]" w+]
    chan configure $f -buffering none
    puts $f {puts [encoding system]; exit}
    set enc [gets $f]
    close $f
    set enc
} -cleanup {
    unset -nocomplain env(LANG)
} -match regexp -result {^(iso8859-15?|utf-8)$}
test unixInit-3.2 {TclpSetInitialEncodings} -setup {
    catch {set oldlc_all $env(LC_ALL)}
} -constraints {unix stdio} -body {
    set env(LANG) japanese
    set env(LC_ALL) japanese
    set f [open "|[list [interpreter]]" w+]
    chan configure $f -buffering none
    puts $f {puts [encoding system]; exit}
    set enc [gets $f]
    close $f
    set validEncodings [list euc-jp]
    if {[string match HP-UX $tcl_platform(os)]} {
	# Some older HP-UX systems need us to accept this as valid Bug 453883
	# reports that newer HP-UX systems report euc-jp like everybody else.
	lappend validEncodings shiftjis
    }
    expr {$enc ni $validEncodings}
} -cleanup {
    unset -nocomplain env(LANG) env(LC_ALL)
    catch {set env(LC_ALL) $oldlc_all}
} -result 0

test unixInit-4.1 {TclpSetVariables} {unix} {
    # just make sure they exist
    set a [list $tcl_library $tcl_pkgPath $tcl_platform(os)]
    set a [list $tcl_platform(osVersion) $tcl_platform(machine)]
    set tcl_platform(platform)
} "unix"

test unixInit-5.1 {Tcl_Init} {emptyTest unix} {
    # test initScript
} {}

test unixInit-6.1 {Tcl_SourceRCFile} {emptyTest unix} {
} {}

test unixInit-7.1 {closed standard channel: Bug 772288} -constraints {
    unix stdio
} -body {
    set tclsh [interpreter]
    set crash [makeFile {puts [open /dev/null]} crash.tcl]
    set crashtest [makeFile "
	close stdin
	[list exec $tclsh $crash]
    " crashtest.tcl]
    exec $tclsh $crashtest
} -cleanup {
    removeFile crash.tcl
    removeFile crashtest.tcl
} -returnCodes 0

# cleanup
unset -nocomplain env(LANG)
catch {set env(LANG) $oldlang}
unset -nocomplain path
::tcltest::cleanupTests
return

# Local Variables:
# mode: tcl
# fill-column: 78
# End: