This file contains a collection of notes that various people have provided about porting Tcl to various machines and operating systems. I don't have personal access to any of these machines, so I make no guarantees that the notes are correct, complete, or up-to-date. If you see the word "I" in any explanations, it refers to the person who contributed the information, not to me; this means that I probably can't answer any questions about any of this stuff. In some cases, a person has volunteered to act as a contact point for questions about porting Tcl to a particular machine; in these cases the person's name and e-mail address are listed. I'm interested in getting new porting information to add to the file; please mail updates to "john.ousterhout@eng.sun.com". This file reflects information provided for Tcl 7.4 and later releases (8.x). If there is no information for your configuration in this file, check the file "porting.old" too; it contains information that was submitted for Tcl 7.3 and earlier releases, and some of that information may still be valid. A new porting database has recently become available on the Web at the following URL: http://www.sunlabs.com/cgi-bin/tcl/info.8.0 This page provides information about the platforms on which Tcl and and Tk 8.0 have been compiled and what changes were needed to get Tcl and Tk to compile. You can also add new entries to that database when you install Tcl and Tk on a new platform. The Web database is likely to be more up-to-date than this file. sccsid = RCS: @(#) $Id: porting.notes,v 1.2 1998/09/14 18:40:16 stanton Exp $ -------------------------------------------- Solaris, various versions -------------------------------------------- 1. If typing "make test" results in an error message saying that there are no "*.test" files, or you get lots of globbing errors, it's probably because your system doesn't have cc installed and you used gcc. In order for this to work, you have to set your CC environment variable to gcc and your CPP environment variable to "gcc -E" before running the configure script. 2. Make sure that /usr/ucb is not in your PATH or LD_LIBRARY_PATH environment variables; this will cause confusion between the new Solaris libraries and older UCB versions (Tcl will expect one version and get another). 3. There have been several reports of problems with the "glob" command. So far these reports have all been for older versions of Tcl, but if you run into problems, edit the Makefile after "configure" is run and add "-DNO_DIRENT_H=1" to the definitions of DEFS. Do this before compiling. -------------------------------------------- SunOS 4 and potentially other OSes -------------------------------------------- On systems where both getcwd(3) and getwd(3) exist, check the man page and if getcwd, like on SunOS 4, uses popen to pwd(1) add -DUSEGETWD to the flags CFLAGS so getwd will be used instead. That is, change the CFLAGS = -O line so it reads CFLAGS = -O -DUSEGETWD -------------------------------------------- Linux, ELF, various versions/distributions -------------------------------------------- If ./configure --enable-shared complains it can not do a shared library you might have to make the following symbolic link: ln -s /lib/libdl.so.1 /lib/libdl.so then remove config.cache and re run configure. -------------------------------------------- Pyramid DC/OSx SVr4, DC/OSx version 94c079 -------------------------------------------- Tcl seems to dump core in cmdinfo.test when compiled with the optimiser turned on in TclEval which calls 'free'. To get around this, turn the optimiser off. -------------------------------------------- SGI machines, IRIX 5.2, 5.3, IRIX64 6.0.1 -------------------------------------------- 1. If you compile with gcc-2.6.3 under some versions of IRIX (e.g. 4.0.5), DBL_MAX is defined too large for gcc and Tcl complains about all floating-point values being too large to represent. If this happens, redefining DBL_MAX to 9.99e299. 2. Add "-D_BSD_TIME" to CFLAGS in Makefile. This avoids type conflicts in the prototype for the gettimeofday procedure. 2. If you're running under Irix 6.x and tclsh dumps core, try removing -O from the CFLAGS in Makefile and recompiling; compiler optimizations seem to cause problems on some machines. -------------------------------------------- IBM RTs, AOS -------------------------------------------- 1. Steal fmod from 4.4BSD 2. Add a #define to tclExpr such that: extern double fmod(); is defined conditionally on ibm032 -------------------------------------------- QNX 4.22 -------------------------------------------- tclPort.h - commented out 2 lines containing #include tcl.h - changed #define VARARGS () - to #ifndef __QNX__ #define VARARGS () #else #define VARARGS (void *, ...) #endif -------------------------------------------- Interactive UNIX -------------------------------------------- Add the switch -Xp to LIBS in Makefile; otherwise strftime will not be found when linking. -------------------------------------------- Motorola SVR4 V4.2 (m88k) -------------------------------------------- For Motorola Unix R40V4.2 (m88k architechure), use /usr/ucb/cc instead of /usr/bin/cc. Otherwise, the compile will fail because of conflicts over the gettimeofday() call. Also, -DNO_DIRENT_H=1 is required for the "glob" command to work. -------------------------------------------- NeXTSTEP 3.x -------------------------------------------- Here's the set of changes I made to make 7.5b3 compile cleanly on NeXTSTEP3.x. Here are a couple lines from unix/Makefile: # Added utsname.o, which implements a uname() emulation for NeXTSTEP. COMPAT_OBJS = getcwd.o strtod.o tmpnam.o utsname.o TCL_NAMES=\ -Dstrtod=tcl_strtod -Dtmpnam=tcl_tmpnam -Dgetcwd=tcl_getcwd \ -Dpanic=tcl_panic -Dmatherr=tcl_matherr \ -Duname=tcl_uname -Dutsname=tcl_utsname # Added mode_t, pid_t, and O_NONBLOCK definitions. AC_FLAGS = -DNO_DIRENT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_TIME_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_TM_ZONE=1 -DHAVE_TM_GMTOFF=1 -DHAVE_TIMEZONE_VAR=1 -DSTDC_HEADERS=1 -Dmode_t=int -Dpid_t=int -DO_NONBLOCK=O_NDELAY ${TCL_NAMES} Here are diffs for other files. utsname.[hc] are a couple files I added to compat/ I'm not clear whether that's where they legitimately belong - I considered stashing them in tclLoadNext.c instead. The tclIO.c change was a bug, I believe, which I reported on comp.lang.tcl and has apparently been noted and fixed. The objc_loadModules() change allows "load" to load object code containing Objective-C code in addition to plain C code. --- scott hess (WWW to "http://www.winternet.com/~shess/") Work: 12550 Portland Avenue South #121, Burnsville, MN 55337 (612)895-1208 diff -rc tcl7.5b3.orig/compat/utsname.c tcl7.5b3/compat/utsname.c *** tcl7.5b3.orig/compat/utsname.c Tue Apr 2 13:57:23 1996 --- tcl7.5b3/compat/utsname.c Mon Mar 18 11:05:54 1996 *************** *** 0 **** --- 1,27 ---- + /* + * utsname.c -- + * + * This file is an emulation of the POSIX uname() function + * under NeXTSTEP 3.x. + * + */ + + #include "utsname.h" + #include + #include + + int uname( struct utsname *name) + { + const NXArchInfo *arch; + if( gethostname( name->nodename, sizeof( name->nodename))==-1) { + return -1; + } + if( (arch=NXGetLocalArchInfo())==NULL) { + return -1; + } + strncpy( name->machine, arch->description, sizeof( name->machine)); + strcpy( name->sysname, "NEXTSTEP"); + strcpy( name->release, "0"); + strcpy( name->version, "3"); + return 0; + } diff -rc tcl7.5b3.orig/compat/utsname.h tcl7.5b3/compat/utsname.h *** tcl7.5b3.orig/compat/utsname.h Tue Apr 2 13:57:26 1996 --- tcl7.5b3/compat/utsname.h Mon Mar 18 10:34:05 1996 *************** *** 0 **** --- 1,22 ---- + /* + * utsname.h -- + * + * This file is an emulation of the POSIX uname() function + * under NeXTSTEP. + * + */ + + #ifndef _UTSNAME + #define _UTSNAME + + struct utsname { + char sysname[ 32]; + char nodename[ 32]; + char release[ 32]; + char version[ 32]; + char machine[ 32]; + }; + + extern int uname( struct utsname *name); + + #endif /* _UTSNAME */ diff -rc tcl7.5b3.orig/generic/tclIO.c tcl7.5b3/generic/tclIO.c *** tcl7.5b3.orig/generic/tclIO.c Fri Mar 8 12:59:53 1996 --- tcl7.5b3/generic/tclIO.c Mon Mar 18 11:38:57 1996 *************** *** 2542,2548 **** } result = GetInput(chanPtr); if (result != 0) { ! if (result == EWOULDBLOCK) { chanPtr->flags |= CHANNEL_BLOCKED; return copied; } --- 2542,2548 ---- } result = GetInput(chanPtr); if (result != 0) { ! if (result == EAGAIN) { chanPtr->flags |= CHANNEL_BLOCKED; return copied; } diff -rc tcl7.5b3.orig/unix/tclLoadNext.c tcl7.5b3/unix/tclLoadNext.c *** tcl7.5b3.orig/unix/tclLoadNext.c Sat Feb 17 16:16:42 1996 --- tcl7.5b3/unix/tclLoadNext.c Mon Mar 18 10:02:36 1996 *************** *** 55,61 **** char *files[]={fileName,NULL}; NXStream *errorStream=NXOpenMemory(0,0,NX_READWRITE); ! if(!rld_load(errorStream,&header,files,NULL)) { NXGetMemoryBuffer(errorStream,&data,&len,&maxlen); Tcl_AppendResult(interp,"couldn't load file \"",fileName,"\": ",data,NULL); NXCloseMemory(errorStream,NX_FREEBUFFER); --- 55,61 ---- char *files[]={fileName,NULL}; NXStream *errorStream=NXOpenMemory(0,0,NX_READWRITE); ! if(objc_loadModules(files,errorStream,NULL,&header,NULL)) { NXGetMemoryBuffer(errorStream,&data,&len,&maxlen); Tcl_AppendResult(interp,"couldn't load file \"",fileName,"\": ",data,NULL); NXCloseMemory(errorStream,NX_FREEBUFFER); diff -rc tcl7.5b3.orig/unix/tclUnixFile.c tcl7.5b3/unix/tclUnixFile.c *** tcl7.5b3.orig/unix/tclUnixFile.c Thu Mar 7 18:16:34 1996 --- tcl7.5b3/unix/tclUnixFile.c Mon Mar 18 11:10:03 1996 *************** *** 31,37 **** --- 31,41 ---- static int executableNameExitHandlerSet = 0; + #if NeXT + #define waitpid( p, s, o) wait4( p, s, o, NULL) + #else extern pid_t waitpid _ANSI_ARGS_((pid_t pid, int *stat_loc, int options)); + #endif /* * Static routines for this file: diff -rc tcl7.5b3.orig/unix/tclUnixInit.c tcl7.5b3/unix/tclUnixInit.c *** tcl7.5b3.orig/unix/tclUnixInit.c Sat Feb 17 16:16:39 1996 --- tcl7.5b3/unix/tclUnixInit.c Mon Mar 18 11:50:28 1996 *************** *** 14,20 **** #include "tclInt.h" #include "tclPort.h" #ifndef NO_UNAME ! # include #endif #if defined(__FreeBSD__) #include --- 14,24 ---- #include "tclInt.h" #include "tclPort.h" #ifndef NO_UNAME ! # if NeXT ! # include "../compat/utsname.h" ! # else ! # include ! # endif #endif #if defined(__FreeBSD__) #include diff -rc tcl7.5b3.orig/unix/tclUnixPort.h tcl7.5b3/unix/tclUnixPort.h *** tcl7.5b3.orig/unix/tclUnixPort.h Thu Mar 7 18:16:31 1996 --- tcl7.5b3/unix/tclUnixPort.h Mon Mar 18 11:53:14 1996 *************** *** 76,82 **** */ #include /* struct sockaddr, SOCK_STREAM, ... */ ! #include /* uname system call. */ #include /* struct in_addr, struct sockaddr_in */ #include /* inet_ntoa() */ #include /* gethostbyname() */ --- 76,88 ---- */ #include /* struct sockaddr, SOCK_STREAM, ... */ ! #ifndef NO_UNAME ! # if NeXT ! # include "../compat/utsname.h" ! # else ! # include /* uname system call. */ ! # endif ! #endif #include /* struct in_addr, struct sockaddr_in */ #include /* inet_ntoa() */ #include /* gethostbyname() */ -------------------------------------------- SCO Unix 3.2.4 (ODT 3.0) -------------------------------------------- The macro va_start in /usr/include/stdarg.h is incorrectly terminated by a semi-colon. This causes compile of generic/tclBasic.c to fail. The best solution is to edit the definition of va_start to remove the `;'. This will fix this file for anything you want to compile. If you don't have permission to edit /usr/include/stdarg.h in place, copy it to the tcl unix directory and change it there. Contact me directly if you have problems on SCO systems. Mark Diekhans -------------------------------------------- SCO Unix 3.2.5 (ODT 5.0) -------------------------------------------- Expect failures from socket tests 2.9 and 3.1. Contact me directly if you have problems on SCO systems. Mark Diekhans -------------------------------------------- Linux 1.2.13 (gcc 2.7.0, libc.so.5.0.9) -------------------------------------------- Symptoms: * Some extensions could not be loaded dynamically, most prominently Blt 2.0 The given error message essentially said: Could not resolve symbol '__eprintf'. (This procedure is used by the macro 'assert') Cause * '__eprintf' is defined in 'libgcc.a', not 'libc.so.x.y'. It is therefore impossible to load it dynamically. * Neither tcl nor tk make use of 'assert', thereby preventing a static linkage. Workaround * I included in 'tclAppInit.c' / 'tkAppInit.c' and then executed 'assert (argc)' just before the call to Tcl_Main / Tk_Main. This forced the static linkage of '__eprintf' and everything went fine from then on. (Something like 'assert (1)', 'assert (a==a)' is not sufficient, it will be optimized away).