#------------------------------------------------------------------------ # SC_PATH_TCLCONFIG -- # # Locate the tclConfig.sh file and perform a sanity check on # the Tcl compile flags # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --with-tcl=... # # Defines the following vars: # TCL_BIN_DIR Full path to the directory containing # the tclConfig.sh file #------------------------------------------------------------------------ AC_DEFUN(SC_PATH_TCLCONFIG, [ # # Ok, lets find the tcl configuration # First, look for one uninstalled. # the alternative search directory is invoked by --with-tcl # if test x"${no_tcl}" = x ; then # we reset no_tcl in case something fails here no_tcl=true AC_ARG_WITH(tcl, AC_HELP_STRING([--with-tcl], [directory containing tcl configuration (tclConfig.sh)]), with_tclconfig=${withval}) AC_MSG_CHECKING([for Tcl configuration]) AC_CACHE_VAL(ac_cv_c_tclconfig,[ # First check to see if --with-tcl was specified. if test x"${with_tclconfig}" != x ; then case ${with_tclconfig} in */tclConfig.sh ) if test -f ${with_tclconfig}; then AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) with_tclconfig=`echo ${with_tclconfig} | sed 's!/tclConfig\.sh$!!'` fi ;; esac if test -f "${with_tclconfig}/tclConfig.sh" ; then ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)` else AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) fi fi # then check for a private Tcl installation if test x"${ac_cv_c_tclconfig}" = x ; then for i in \ ../tcl \ `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ ../../tcl \ `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ ../../../tcl \ `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do if test -f "$i/unix/tclConfig.sh" ; then ac_cv_c_tclconfig=`(cd $i/unix; pwd)` break fi done fi # check in a few common install locations if test x"${ac_cv_c_tclconfig}" = x ; then for i in `ls -d ${libdir} 2>/dev/null` \ `ls -d /usr/local/lib 2>/dev/null` \ `ls -d /usr/contrib/lib 2>/dev/null` \ `ls -d /usr/lib 2>/dev/null` \ ; do if test -f "$i/tclConfig.sh" ; then ac_cv_c_tclconfig=`(cd $i; pwd)` break fi done fi # check in a few other private locations if test x"${ac_cv_c_tclconfig}" = x ; then for i in \ ${srcdir}/../tcl \ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do if test -f "$i/unix/tclConfig.sh" ; then ac_cv_c_tclconfig=`(cd $i/unix; pwd)` break fi done fi ]) if test x"${ac_cv_c_tclconfig}" = x ; then TCL_BIN_DIR="# no Tcl configs found" AC_MSG_WARN(Can't find Tcl configuration definitions) exit 0 else no_tcl= TCL_BIN_DIR=${ac_cv_c_tclconfig} AC_MSG_RESULT(found $TCL_BIN_DIR/tclConfig.sh) fi fi ]) #------------------------------------------------------------------------ # SC_PATH_TKCONFIG -- # # Locate the tkConfig.sh file # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --with-tk=... # # Defines the following vars: # TK_BIN_DIR Full path to the directory containing # the tkConfig.sh file #------------------------------------------------------------------------ AC_DEFUN(SC_PATH_TKCONFIG, [ # # Ok, lets find the tk configuration # First, look for one uninstalled. # the alternative search directory is invoked by --with-tk # if test x"${no_tk}" = x ; then # we reset no_tk in case something fails here no_tk=true AC_ARG_WITH(tk, AC_HELP_STRING([--with-tk], [directory containing tk configuration (tkConfig.sh)]), with_tkconfig=${withval}) AC_MSG_CHECKING([for Tk configuration]) AC_CACHE_VAL(ac_cv_c_tkconfig,[ # First check to see if --with-tkconfig was specified. if test x"${with_tkconfig}" != x ; then case ${with_tkconfig} in */tkConfig.sh ) if test -f ${with_tkconfig}; then AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) with_tkconfig=`echo ${with_tkconfig} | sed 's!/tkConfig\.sh$!!'` fi ;; esac if test -f "${with_tkconfig}/tkConfig.sh" ; then ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)` else AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) fi fi # then check for a private Tk library if test x"${ac_cv_c_tkconfig}" = x ; then for i in \ ../tk \ `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ ../../tk \ `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ ../../../tk \ `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do if test -f "$i/unix/tkConfig.sh" ; then ac_cv_c_tkconfig=`(cd $i/unix; pwd)` break fi done fi # check in a few common install locations if test x"${ac_cv_c_tkconfig}" = x ; then for i in `ls -d ${libdir} 2>/dev/null` \ `ls -d /usr/local/lib 2>/dev/null` \ `ls -d /usr/contrib/lib 2>/dev/null` \ `ls -d /usr/lib 2>/dev/null` \ ; do if test -f "$i/tkConfig.sh" ; then ac_cv_c_tkconfig=`(cd $i; pwd)` break fi done fi # check in a few other private locations if test x"${ac_cv_c_tkconfig}" = x ; then for i in \ ${srcdir}/../tk \ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do if test -f "$i/unix/tkConfig.sh" ; then ac_cv_c_tkconfig=`(cd $i/unix; pwd)` break fi done fi ]) if test x"${ac_cv_c_tkconfig}" = x ; then TK_BIN_DIR="# no Tk configs found" AC_MSG_WARN(Can't find Tk configuration definitions) exit 0 else no_tk= TK_BIN_DIR=${ac_cv_c_tkconfig} AC_MSG_RESULT(found $TK_BIN_DIR/tkConfig.sh) fi fi ]) #------------------------------------------------------------------------ # SC_LOAD_TCLCONFIG -- # # Load the tclConfig.sh file # # Arguments: # # Requires the following vars to be set: # TCL_BIN_DIR # # Results: # # Subst the following vars: # TCL_BIN_DIR # TCL_SRC_DIR # TCL_LIB_FILE # #------------------------------------------------------------------------ AC_DEFUN(SC_LOAD_TCLCONFIG, [ AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh]) if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then AC_MSG_RESULT([loading]) . $TCL_BIN_DIR/tclConfig.sh else AC_MSG_RESULT([file not found]) fi # # If the TCL_BIN_DIR is the build directory (not the install directory), # then set the common variable name to the value of the build variables. # For example, the variable TCL_LIB_SPEC will be set to the value # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC # instead of TCL_BUILD_LIB_SPEC since it will work with both an # installed and uninstalled version of Tcl. # if test -f $TCL_BIN_DIR/Makefile ; then TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC} TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC} TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH} fi # # eval is required to do the TCL_DBGX substitution # (@@@ Is this still the case?) # eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" AC_SUBST(TCL_VERSION) AC_SUBST(TCL_BIN_DIR) AC_SUBST(TCL_SRC_DIR) AC_SUBST(TCL_LIB_FILE) AC_SUBST(TCL_LIB_FLAG) AC_SUBST(TCL_LIB_SPEC) AC_SUBST(TCL_STUB_LIB_FILE) AC_SUBST(TCL_STUB_LIB_FLAG) AC_SUBST(TCL_STUB_LIB_SPEC) ]) #------------------------------------------------------------------------ # SC_LOAD_TKCONFIG -- # # Load the tkConfig.sh file # # Arguments: # # Requires the following vars to be set: # TK_BIN_DIR # # Results: # # Sets the following vars that should be in tkConfig.sh: # TK_BIN_DIR #------------------------------------------------------------------------ AC_DEFUN(SC_LOAD_TKCONFIG, [ AC_MSG_CHECKING([for existence of $TK_BIN_DIR/tkConfig.sh]) if test -f "$TK_BIN_DIR/tkConfig.sh" ; then AC_MSG_RESULT([loading]) . $TK_BIN_DIR/tkConfig.sh else AC_MSG_RESULT([could not find $TK_BIN_DIR/tkConfig.sh]) fi AC_SUBST(TK_VERSION) AC_SUBST(TK_BIN_DIR) AC_SUBST(TK_SRC_DIR) AC_SUBST(TK_LIB_FILE) ]) #------------------------------------------------------------------------ # SC_PROG_TCLSH # Locate a tclsh shell installed on the system path. This macro # will only find a Tcl shell that already exists on the system. # It will not find a Tcl shell in the Tcl build directory or # a Tcl shell that has been installed from the Tcl build directory. # If a Tcl shell can't be located on the PATH, then TCLSH_PROG will # be set to "". Extensions should take care not to create Makefile # rules that are run by default and depend on TCLSH_PROG. An # extension can't assume that an executable Tcl shell exists at # build time. # # Arguments # none # # Results # Subst's the following values: # TCLSH_PROG #------------------------------------------------------------------------ AC_DEFUN(SC_PROG_TCLSH, [ AC_MSG_CHECKING([for tclsh]) AC_CACHE_VAL(ac_cv_path_tclsh, [ search_path=`echo ${PATH} | sed -e 's/:/ /g'` for dir in $search_path ; do for j in `ls -r $dir/tclsh[[8-9]]* 2> /dev/null` \ `ls -r $dir/tclsh* 2> /dev/null` ; do if test x"$ac_cv_path_tclsh" = x ; then if test -f "$j" ; then ac_cv_path_tclsh=$j break fi fi done done ]) if test -f "$ac_cv_path_tclsh" ; then TCLSH_PROG="$ac_cv_path_tclsh" AC_MSG_RESULT($TCLSH_PROG) else # It is not an error if an installed version of Tcl can't be located. TCLSH_PROG="" AC_MSG_RESULT([No tclsh found on PATH]) fi AC_SUBST(TCLSH_PROG) ]) #------------------------------------------------------------------------ # SC_BUILD_TCLSH # Determine the fully qualified path name of the tclsh executable # in the Tcl build directory. This macro will correctly determine # the name of the tclsh executable even if tclsh has not yet # been built in the build directory. The build tclsh must be used # when running tests from an extension build directory. It is not # correct to use the TCLSH_PROG in cases like this. # # Arguments # none # # Results # Subst's the following values: # BUILD_TCLSH #------------------------------------------------------------------------ AC_DEFUN(SC_BUILD_TCLSH, [ AC_MSG_CHECKING([for tclsh in Tcl build directory]) BUILD_TCLSH=${TCL_BIN_DIR}/tclsh AC_MSG_RESULT($BUILD_TCLSH) AC_SUBST(BUILD_TCLSH) ]) #------------------------------------------------------------------------ # SC_ENABLE_SHARED -- # # Allows the building of shared libraries # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-shared=yes|no # # Defines the following vars: # STATIC_BUILD Used for building import/export libraries # on Windows. # # Sets the following vars: # SHARED_BUILD Value of 1 or 0 #------------------------------------------------------------------------ AC_DEFUN(SC_ENABLE_SHARED, [ AC_MSG_CHECKING([how to build libraries]) AC_ARG_ENABLE(shared, AC_HELP_STRING([--enable-shared], [build and link with shared libraries (default: on)]), [tcl_ok=$enableval], [tcl_ok=yes]) if test "${enable_shared+set}" = set; then enableval="$enable_shared" tcl_ok=$enableval else tcl_ok=yes fi if test "$tcl_ok" = "yes" ; then AC_MSG_RESULT([shared]) SHARED_BUILD=1 else AC_MSG_RESULT([static]) SHARED_BUILD=0 AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?]) fi ]) #------------------------------------------------------------------------ # SC_ENABLE_FRAMEWORK -- # # Allows the building of shared libraries into frameworks # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-framework=yes|no # # Sets the following vars: # FRAMEWORK_BUILD Value of 1 or 0 #------------------------------------------------------------------------ AC_DEFUN(SC_ENABLE_FRAMEWORK, [ AC_MSG_CHECKING([how to package libraries]) AC_ARG_ENABLE(framework, AC_HELP_STRING([--enable-framework], [package shared libraries in MacOSX frameworks (default: off)]), [tcl_ok=$enableval], [tcl_ok=no]) if test "${enable_framework+set}" = set; then enableval="$enable_framework" tcl_ok=$enableval else tcl_ok=no fi if test "$tcl_ok" = "yes" ; then AC_MSG_RESULT([framework]) FRAMEWORK_BUILD=1 if test "${SHARED_BUILD}" = "0" ; then AC_MSG_WARN("Frameworks can only be built if --enable-shared is yes") FRAMEWORK_BUILD=0 fi if test $tcl_corefoundation = no; then AC_MSG_WARN("Frameworks can only be used when CoreFoundation is available") FRAMEWORK_BUILD=0 fi else AC_MSG_RESULT([standard shared library]) FRAMEWORK_BUILD=0 fi ]) #------------------------------------------------------------------------ # SC_ENABLE_THREADS -- # # Specify if thread support should be enabled # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-threads # # Sets the following vars: # THREADS_LIBS Thread library(s) # # Defines the following vars: # TCL_THREADS # _REENTRANT # _THREAD_SAFE # #------------------------------------------------------------------------ AC_DEFUN(SC_ENABLE_THREADS, [ AC_MSG_CHECKING(for building with threads) AC_ARG_ENABLE(threads, AC_HELP_STRING([--enable-threads], [build with threads (default: off)]), [tcl_ok=$enableval], [tcl_ok=no]) if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then if test "${TCL_THREADS}" = 1; then AC_MSG_RESULT([yes (threaded core)]) else AC_MSG_RESULT([yes]) fi TCL_THREADS=1 AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?]) # USE_THREAD_ALLOC tells us to try the special thread-based # allocator that significantly reduces lock contention AC_DEFINE(USE_THREAD_ALLOC, 1, [Do we want to use the threaded memory allocator?]) AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) if test "`uname -s`" = "SunOS" ; then AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, [Do we really want to follow the standard? Yes we do!]) fi AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?]) AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) if test "$tcl_ok" = "no"; then # Check a little harder for __pthread_mutex_init in the same # library, as some systems hide it there until pthread.h is # defined. We could alternatively do an AC_TRY_COMPILE with # pthread.h, but that will work with libpthread really doesn't # exist, like AIX 4.2. [Bug: 4359] AC_CHECK_LIB(pthread,__pthread_mutex_init,tcl_ok=yes,tcl_ok=no) fi if test "$tcl_ok" = "yes"; then # The space is needed THREADS_LIBS=" -lpthread" else AC_CHECK_LIB(pthreads,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) if test "$tcl_ok" = "yes"; then # The space is needed THREADS_LIBS=" -lpthreads" else AC_CHECK_LIB(c,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) if test "$tcl_ok" = "no"; then AC_CHECK_LIB(c_r,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) if test "$tcl_ok" = "yes"; then # The space is needed THREADS_LIBS=" -pthread" else TCL_THREADS=0 AC_MSG_WARN("Don t know how to find pthread lib on your system - you must disable thread support or edit the LIBS in the Makefile...") fi fi fi fi # Does the pthread-implementation provide # 'pthread_attr_setstacksize' ? ac_saved_libs=$LIBS LIBS="$LIBS $THREADS_LIBS" AC_CHECK_FUNCS(pthread_attr_setstacksize) AC_CHECK_FUNC(pthread_attr_get_np,tcl_ok=yes,tcl_ok=no) if test $tcl_ok = yes ; then AC_DEFINE(HAVE_PTHREAD_ATTR_GET_NP, 1, [Do we want a BSD-like thread-attribute interface?]) AC_MSG_CHECKING([for pthread_attr_get_np declaration]) AC_CACHE_VAL(tcl_cv_grep_pthread_attr_get_np, AC_EGREP_HEADER(pthread_attr_get_np, pthread.h, tcl_cv_grep_pthread_attr_get_np=present, tcl_cv_grep_pthread_attr_get_np=missing)) AC_MSG_RESULT($tcl_cv_grep_pthread_attr_get_np) if test $tcl_cv_grep_pthread_attr_get_np = missing ; then AC_DEFINE(ATTRGETNP_NOT_DECLARED, 1, [Is pthread_attr_get_np() declared in ?]) fi else AC_CHECK_FUNC(pthread_getattr_np,tcl_ok=yes,tcl_ok=no) if test $tcl_ok = yes ; then AC_DEFINE(HAVE_PTHREAD_GETATTR_NP, 1, [Do we want a Linux-like thread-attribute interface?]) AC_MSG_CHECKING([for pthread_getattr_np declaration]) AC_CACHE_VAL(tcl_cv_grep_pthread_getattr_np, AC_EGREP_HEADER(pthread_getattr_np, pthread.h, tcl_cv_grep_pthread_getattr_np=present, tcl_cv_grep_pthread_getattr_np=missing)) AC_MSG_RESULT($tcl_cv_grep_pthread_getattr_np) if test $tcl_cv_grep_pthread_getattr_np = missing ; then AC_DEFINE(GETATTRNP_NOT_DECLARED, 1, [Is pthread_getattr_np declared in ?]) fi fi fi LIBS=$ac_saved_libs else TCL_THREADS=0 AC_MSG_RESULT([no (default)]) fi AC_SUBST(TCL_THREADS) ]) #------------------------------------------------------------------------ # SC_ENABLE_SYMBOLS -- # # Specify if debugging symbols should be used. # Memory (TCL_MEM_DEBUG) and compile (TCL_COMPILE_DEBUG) debugging # can also be enabled. # # Arguments: # none # # Requires the following vars to be set in the Makefile: # CFLAGS_DEBUG # CFLAGS_OPTIMIZE # LDFLAGS_DEBUG # LDFLAGS_OPTIMIZE # # Results: # # Adds the following arguments to configure: # --enable-symbols # # Defines the following vars: # CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true # Sets to $(CFLAGS_OPTIMIZE) if false # LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true # Sets to $(LDFLAGS_OPTIMIZE) if false # DBGX Formerly used as debug library extension; # always blank now. # #------------------------------------------------------------------------ AC_DEFUN(SC_ENABLE_SYMBOLS, [ AC_MSG_CHECKING([for build with symbols]) AC_ARG_ENABLE(symbols, AC_HELP_STRING([--enable-symbols], [build with debugging symbols (default: off)]), [tcl_ok=$enableval], [tcl_ok=no]) # FIXME: Currently, LDFLAGS_DEFAULT is not used, it should work like CFLAGS_DEFAULT. DBGX="" if test "$tcl_ok" = "no"; then CFLAGS_DEFAULT='$(CFLAGS_OPTIMIZE)' LDFLAGS_DEFAULT='$(LDFLAGS_OPTIMIZE)' AC_MSG_RESULT([no]) AC_DEFINE(TCL_CFG_OPTIMIZED, 1, [Is this an optimized build?]) else CFLAGS_DEFAULT='$(CFLAGS_DEBUG)' LDFLAGS_DEFAULT='$(LDFLAGS_DEBUG)' if test "$tcl_ok" = "yes"; then AC_MSG_RESULT([yes (standard debugging)]) fi fi AC_SUBST(CFLAGS_DEFAULT) AC_SUBST(LDFLAGS_DEFAULT) ### FIXME: Surely TCL_CFG_DEBUG should be set to whether we're debugging? AC_DEFINE(TCL_CFG_DEBUG, 1, [Is debugging enabled?]) if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?]) fi ifelse($1,bccdebug,dnl Only enable 'compile' for the Tcl core itself if test "$tcl_ok" = "compile" -o "$tcl_ok" = "all"; then AC_DEFINE(TCL_COMPILE_DEBUG, 1, [Is bytecode debugging enabled?]) AC_DEFINE(TCL_COMPILE_STATS, 1, [Are bytecode statistics enabled?]) fi) if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then if test "$tcl_ok" = "all"; then AC_MSG_RESULT([enabled symbols mem ]ifelse($1,bccdebug,[compile ])[debugging]) else AC_MSG_RESULT([enabled $tcl_ok debugging]) fi fi ]) #------------------------------------------------------------------------ # SC_ENABLE_LANGINFO -- # # Allows use of modern nl_langinfo check for better l10n. # This is only relevant for Unix. # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-langinfo=yes|no (default is yes) # # Defines the following vars: # HAVE_LANGINFO Triggers use of nl_langinfo if defined. # #------------------------------------------------------------------------ AC_DEFUN(SC_ENABLE_LANGINFO, [ AC_ARG_ENABLE(langinfo, AC_HELP_STRING([--enable-langinfo], [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]), [langinfo_ok=$enableval], [langinfo_ok=yes]) HAVE_LANGINFO=0 if test "$langinfo_ok" = "yes"; then if test "$langinfo_ok" = "yes"; then AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) fi fi AC_MSG_CHECKING([whether to use nl_langinfo]) if test "$langinfo_ok" = "yes"; then AC_TRY_COMPILE([#include ], [nl_langinfo(CODESET);],[langinfo_ok=yes],[langinfo_ok=no]) if test "$langinfo_ok" = "no"; then langinfo_ok="no (could not compile with nl_langinfo)"; fi if test "$langinfo_ok" = "yes"; then AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?]) fi fi AC_MSG_RESULT([$langinfo_ok]) ]) #-------------------------------------------------------------------- # SC_CONFIG_MANPAGES # # Decide whether to use symlinks for linking the manpages, # whether to compress the manpages after installation, and # whether to add a package name suffix to the installed # manpages to avoidfile name clashes. # If compression is enabled also find out what file name suffix # the given compression program is using. # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-man-symlinks # --enable-man-compression=PROG # --enable-man-suffix[=STRING] # # Defines the following variable: # # MAN_FLAGS - The apropriate flags for installManPage # according to the user's selection. # #-------------------------------------------------------------------- AC_DEFUN(SC_CONFIG_MANPAGES, [ AC_MSG_CHECKING([whether to use symlinks for manpages]) AC_ARG_ENABLE(man-symlinks, AC_HELP_STRING([--enable-man-symlinks], [use symlinks for the manpages (default: off)]), test "$enableval" != "no" && MAN_FLAGS="$MAN_FLAGS --symlinks", enableval="no") AC_MSG_RESULT([$enableval]) AC_MSG_CHECKING([whether to compress the manpages]) AC_ARG_ENABLE(man-compression, AC_HELP_STRING([--enable-man-compression=PROG], [compress the manpages with PROG (default: off)]), [case $enableval in yes) AC_MSG_ERROR([missing argument to --enable-man-compression]);; no) ;; *) MAN_FLAGS="$MAN_FLAGS --compress $enableval";; esac], enableval="no") AC_MSG_RESULT([$enableval]) if test "$enableval" != "no"; then AC_MSG_CHECKING([for compressed file suffix]) touch TeST $enableval TeST Z=`ls TeST* | sed 's/^....//'` rm -f TeST* MAN_FLAGS="$MAN_FLAGS --extension $Z" AC_MSG_RESULT([$Z]) fi AC_MSG_CHECKING([whether to add a package name suffix for the manpages]) AC_ARG_ENABLE(man-suffix, AC_HELP_STRING([--enable-man-suffix=STRING], [use STRING as a suffix to manpage file names (default: no, AC_PACKAGE_NAME if enabled without specifying STRING)]), [case $enableval in yes) enableval="AC_PACKAGE_NAME";; no) ;; *) MAN_FLAGS="$MAN_FLAGS --suffix $enableval";; esac], enableval="no") AC_MSG_RESULT([$enableval]) AC_SUBST(MAN_FLAGS) ]) #-------------------------------------------------------------------- # SC_CONFIG_CFLAGS # # Try to determine the proper flags to pass to the compiler # for building shared libraries and other such nonsense. # # Arguments: # none # # Results: # # Defines and substitutes the following vars: # # DL_OBJS - Name of the object file that implements dynamic # loading for Tcl on this system. # DL_LIBS - Library file(s) to include in tclsh and other base # applications in order for the "load" command to work. # LDFLAGS - Flags to pass to the compiler when linking object # files into an executable application binary such # as tclsh. # LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", # that tell the run-time dynamic linker where to look # for shared libraries such as libtcl.so. Depends on # the variable LIB_RUNTIME_DIR in the Makefile. Could # be the same as CC_SEARCH_FLAGS if ${CC} is used to link. # CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib", # that tell the run-time dynamic linker where to look # for shared libraries such as libtcl.so. Depends on # the variable LIB_RUNTIME_DIR in the Makefile. # MAKE_LIB - Command to execute to build the a library; # differs when building shared or static. # MAKE_STUB_LIB - # Command to execute to build a stub library. # INSTALL_LIB - Command to execute to install a library; # differs when building shared or static. # INSTALL_STUB_LIB - # Command to execute to install a stub library. # STLIB_LD - Base command to use for combining object files # into a static library. # SHLIB_CFLAGS - Flags to pass to cc when compiling the components # of a shared library (may request position-independent # code, among other things). # SHLIB_LD - Base command to use for combining object files # into a shared library. # SHLIB_LD_LIBS - Dependent libraries for the linker to scan when # creating shared libraries. This symbol typically # goes at the end of the "ld" commands that build # shared libraries. The value of the symbol is # "${LIBS}" if all of the dependent libraries should # be specified when creating a shared library. If # dependent libraries should not be specified (as on # SunOS 4.x, where they cause the link to fail, or in # general if Tcl and Tk aren't themselves shared # libraries), then this symbol has an empty string # as its value. # SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable # extensions. An empty string means we don't know how # to use shared libraries on this platform. # TCL_SHLIB_LD_EXTRAS - Additional element which are added to SHLIB_LD_LIBS # TK_SHLIB_LD_EXTRAS for the build of Tcl and Tk, but not recorded in the # tclConfig.sh, since they are only used for the build # of Tcl and Tk. # Examples: MacOS X records the library version and # compatibility version in the shared library. But # of course the Tcl version of this is only used for Tcl. # LIB_SUFFIX - Specifies everything that comes after the "libfoo" # in a static or shared library name, using the $VERSION variable # to put the version in the right place. This is used # by platforms that need non-standard library names. # Examples: ${VERSION}.so.1.1 on NetBSD, since it needs # to have a version after the .so, and ${VERSION}.a # on AIX, since a shared library needs to have # a .a extension whereas shared objects for loadable # extensions have a .so extension. Defaults to # ${VERSION}${SHLIB_SUFFIX}. # TCL_NEEDS_EXP_FILE - # 1 means that an export file is needed to link to a # shared library. # TCL_EXP_FILE - The name of the installed export / import file which # should be used to link to the Tcl shared library. # Empty if Tcl is unshared. # TCL_BUILD_EXP_FILE - # The name of the built export / import file which # should be used to link to the Tcl shared library. # Empty if Tcl is unshared. # TCL_LIBS - # Libs to use when linking Tcl shell or some other # shell that includes Tcl libs. # CFLAGS_DEBUG - # Flags used when running the compiler in debug mode # CFLAGS_OPTIMIZE - # Flags used when running the compiler in optimize mode # CFLAGS # #-------------------------------------------------------------------- AC_DEFUN(SC_CONFIG_CFLAGS, [ # Step 0.a: Enable 64 bit support? AC_MSG_CHECKING([if 64bit support is requested]) AC_ARG_ENABLE(64bit, AC_HELP_STRING([--enable-64bit], [enable 64bit support (default: off)]), ,enableval="no") if test "$enableval" = "yes"; then do64bit=yes else do64bit=no fi AC_MSG_RESULT($do64bit) # Step 0.b: Enable Solaris 64 bit VIS support? AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) AC_ARG_ENABLE(64bit-vis, AC_HELP_STRING([--enable-64bit-vis], [enable 64bit Sparc VIS support (default: off)]), ,enableval="no") if test "$enableval" = "yes"; then # Force 64bit on with VIS do64bit=yes do64bitVIS=yes else do64bitVIS=no fi AC_MSG_RESULT($do64bitVIS) # Step 1: set the variable "system" to hold the name and version number # for the system. This can usually be done via the "uname" command, but # there are a few systems, like Next, where this doesn't work. AC_MSG_CHECKING([system version (for dynamic loading)]) if test -f /usr/lib/NextStep/software_version; then system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` else system=`uname -s`-`uname -r` if test "$?" -ne 0 ; then AC_MSG_RESULT([unknown (can't find uname command)]) system=unknown else # Special check for weird MP-RAS system (uname returns weird # results, and the version is kept in special file). if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then system=MP-RAS-`awk '{print $3}' /etc/.relid'` fi if test "`uname -s`" = "AIX" ; then system=AIX-`uname -v`.`uname -r` fi AC_MSG_RESULT($system) fi fi # Step 2: check for existence of -ldl library. This is needed because # Linux can use either -ldl or -ldld for dynamic loading. AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) # Require ranlib early so we can override it in special cases below. AC_REQUIRE([AC_PROG_RANLIB]) # Step 3: set configuration options based on system name and version. do64bit_ok=no LDFLAGS_ORIG="$LDFLAGS" # When ld needs options to work in 64-bit mode, put them in # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] # is disabled by the user. [Bug 1016796] LDFLAGS_ARCH="" TCL_EXPORT_FILE_SUFFIX="" UNSHARED_LIB_SUFFIX="" TCL_TRIM_DOTS='`echo ${VERSION} | tr -d .`' ECHO_VERSION='`echo ${VERSION}`' TCL_LIB_VERSIONS_OK=ok CFLAGS_DEBUG=-g CFLAGS_OPTIMIZE=-O if test "$GCC" = "yes" ; then CFLAGS_WARNING="-Wall -Wno-implicit-int" else CFLAGS_WARNING="" fi TCL_NEEDS_EXP_FILE=0 TCL_BUILD_EXP_FILE="" TCL_EXP_FILE="" dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed. dnl AC_CHECK_TOOL(AR, ar) AC_CHECK_PROG(AR, ar, ar) if test "${AR}" = "" ; then AC_MSG_ERROR([Required archive tool 'ar' not found on PATH.]) fi STLIB_LD='${AR} cr' LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" PLAT_OBJS="" PLAT_SRCS="" case $system in AIX-*) if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes" ; then # AIX requires the _r compiler when gcc isn't being used if test "${CC}" != "cc_r" ; then CC=${CC}_r fi AC_MSG_RESULT([Using $CC for compiling with threads]) fi LIBS="$LIBS -lc" SHLIB_CFLAGS="" # Note: need the LIBS below, otherwise Tk won't find Tcl's # symbols when dynamically loaded into tclsh. SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" LD_LIBRARY_PATH_VAR="LIBPATH" # Check to enable 64-bit flags for compiler/linker on AIX 4+ if test "$do64bit" = "yes" -a "`uname -v`" -gt "3" ; then if test "$GCC" = "yes" ; then AC_MSG_WARN([64bit mode not supported with GCC on $system]) else do64bit_ok=yes CFLAGS="$CFLAGS -q64" LDFLAGS_ARCH="-q64" RANLIB="${RANLIB} -X64" AR="${AR} -X64" SHLIB_LD_FLAGS="-b64" fi fi if test "`uname -m`" = "ia64" ; then # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC SHLIB_LD="/usr/ccs/bin/ld -G -z text" # AIX-5 has dl* in libc.so DL_LIBS="" if test "$GCC" = "yes" ; then CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' else CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' fi LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' else if test "$GCC" = "yes" ; then SHLIB_LD="gcc -shared" else SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry" fi SHLIB_LD="${TCL_SRC_DIR}/unix/ldAix ${SHLIB_LD} ${SHLIB_LD_FLAGS}" DL_LIBS="-ldl" CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} TCL_NEEDS_EXP_FILE=1 TCL_EXPORT_FILE_SUFFIX='${VERSION}.exp' fi # AIX v<=4.1 has some different flags than 4.2+ if test "$system" = "AIX-4.1" -o "`uname -v`" -lt "4" ; then AC_LIBOBJ([tclLoadAix]) DL_LIBS="-lld" fi # On AIX <=v4 systems, libbsd.a has to be linked in to support # non-blocking file IO. This library has to be linked in after # the MATH_LIBS or it breaks the pow() function. The way to # insure proper sequencing, is to add it to the tail of MATH_LIBS. # This library also supplies gettimeofday. # # AIX does not have a timezone field in struct tm. When the AIX # bsd library is used, the timezone global and the gettimeofday # methods are to be avoided for timezone deduction instead, we # deduce the timezone by comparing the localtime result on a # known GMT value. AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes, libbsd=no) if test $libbsd = yes; then MATH_LIBS="$MATH_LIBS -lbsd" AC_DEFINE(USE_DELTA_FOR_TZ, 1, [Do we need a special AIX hack for timezones?]) fi ;; BeOS*) SHLIB_CFLAGS="-fPIC" SHLIB_LD="${CC} -nostart" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" #----------------------------------------------------------- # Check for inet_ntoa in -lbind, for BeOS (which also needs # -lsocket, even if the network functions are in -lnet which # is always linked to, for compatibility. #----------------------------------------------------------- AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"]) ;; BSD/OS-2.1*|BSD/OS-3*) SHLIB_CFLAGS="" SHLIB_LD="shlicc -r" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; BSD/OS-4.*) SHLIB_CFLAGS="-export-dynamic -fPIC" SHLIB_LD="cc -shared" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -export-dynamic" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; dgux*) SHLIB_CFLAGS="-K PIC" SHLIB_LD="cc -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; HP-UX-*.11.*) # Use updated header definitions where possible AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?]) LIBS="$LIBS -lxnet" # Use the XOPEN network library SHLIB_SUFFIX=".sl" AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = yes; then SHLIB_CFLAGS="+z" SHLIB_LD="ld -b" SHLIB_LD_LIBS='${LIBS}' DL_OBJS="tclLoadShl.o" DL_LIBS="-ldld" LDFLAGS="$LDFLAGS -Wl,-E" CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' LD_LIBRARY_PATH_VAR="SHLIB_PATH" fi if test "$GCC" = "yes" ; then SHLIB_LD="gcc -shared" SHLIB_LD_LIBS='${LIBS}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} fi # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc #CFLAGS="$CFLAGS +DAportable" # Check to enable 64-bit flags for compiler/linker if test "$do64bit" = "yes" ; then if test "$GCC" = "yes" ; then hpux_arch=`gcc -dumpmachine` case $hpux_arch in hppa64*) # 64-bit gcc in use. Fix flags for GNU ld. do64bit_ok=yes SHLIB_LD="gcc -shared" SHLIB_LD_LIBS='${LIBS}' CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} ;; *) AC_MSG_WARN("64bit mode not supported with GCC on $system") ;; esac else do64bit_ok=yes CFLAGS="$CFLAGS +DD64" LDFLAGS_ARCH="+DD64" fi fi ;; HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) SHLIB_SUFFIX=".sl" AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = yes; then SHLIB_CFLAGS="+z" SHLIB_LD="ld -b" SHLIB_LD_LIBS="" DL_OBJS="tclLoadShl.o" DL_LIBS="-ldld" LDFLAGS="$LDFLAGS -Wl,-E" CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' LD_LIBRARY_PATH_VAR="SHLIB_PATH" fi ;; IRIX-5.*) SHLIB_CFLAGS="" SHLIB_LD="ld -shared -rdata_shared" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' ;; IRIX-6.*) SHLIB_CFLAGS="" SHLIB_LD="ld -n32 -shared -rdata_shared" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' if test "$GCC" = "yes" ; then CFLAGS="$CFLAGS -mabi=n32" LDFLAGS="$LDFLAGS -mabi=n32" else case $system in IRIX-6.3) # Use to build 6.2 compatible binaries on 6.3. CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" ;; *) CFLAGS="$CFLAGS -n32" ;; esac LDFLAGS="$LDFLAGS -n32" fi ;; IRIX64-6.*) SHLIB_CFLAGS="" SHLIB_LD="ld -n32 -shared -rdata_shared" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' # Check to enable 64-bit flags for compiler/linker if test "$do64bit" = "yes" ; then if test "$GCC" = "yes" ; then AC_MSG_WARN([64bit mode not supported by gcc]) else do64bit_ok=yes SHLIB_LD="ld -64 -shared -rdata_shared" CFLAGS="$CFLAGS -64" LDFLAGS_ARCH="-64" fi fi ;; Linux*) SHLIB_CFLAGS="-fPIC" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" CFLAGS_OPTIMIZE=-O2 # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings # when you inline the string and math operations. Turn this off to # get rid of the warnings. #CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" if test "$have_dl" = yes; then SHLIB_LD="${CC} -shared" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -Wl,--export-dynamic" CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} else AC_CHECK_HEADER(dld.h, [ SHLIB_LD="ld -shared" DL_OBJS="tclLoadDld.o" DL_LIBS="-ldld" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS=""]) fi if test "`uname -m`" = "alpha" ; then CFLAGS="$CFLAGS -mieee" fi # The combo of gcc + glibc has a bug related # to inlining of functions like strtod(). The # -fno-builtin flag should address this problem # but it does not work. The -fno-inline flag # is kind of overkill but it works. # Disable inlining only when one of the # files in compat/*.c is being linked in. if test x"${USE_COMPAT}" != x ; then CFLAGS="$CFLAGS -fno-inline" fi # XIM peeking works under XFree86. AC_DEFINE(PEEK_XCLOSEIM, 1, [May we use XIM peeking safely?]) ;; GNU*) SHLIB_CFLAGS="-fPIC" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" if test "$have_dl" = yes; then SHLIB_LD="${CC} -shared" DL_OBJS="" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -Wl,--export-dynamic" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" else AC_CHECK_HEADER(dld.h, [ SHLIB_LD="ld -shared" DL_OBJS="" DL_LIBS="-ldld" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS=""]) fi if test "`uname -m`" = "alpha" ; then CFLAGS="$CFLAGS -mieee" fi ;; Lynx*) SHLIB_CFLAGS="-fPIC" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" CFLAGS_OPTIMIZE=-02 SHLIB_LD="${CC} -shared " DL_OBJS="tclLoadDl.o" DL_LIBS="-mshared -ldl" LD_FLAGS="-Wl,--export-dynamic" CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' ;; MP-RAS-02*) SHLIB_CFLAGS="-K PIC" SHLIB_LD="cc -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; MP-RAS-*) SHLIB_CFLAGS="-K PIC" SHLIB_LD="cc -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -Wl,-Bexport" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; NetBSD-*|FreeBSD-[[1-2]].*) # NetBSD/SPARC needs -fPIC, -fpic will not do. SHLIB_CFLAGS="-fPIC" SHLIB_LD="ld -Bshareable -x" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' AC_MSG_CHECKING(for ELF) AC_EGREP_CPP(yes, [ #ifdef __ELF__ yes #endif ], AC_MSG_RESULT(yes) SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so', AC_MSG_RESULT(no) SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' ) # Ancient FreeBSD doesn't handle version numbers with dots. UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' TCL_LIB_VERSIONS_OK=nodots ;; OpenBSD-*) # OpenBSD/SPARC[64] needs -fPIC, -fpic will not do. case `machine` in sparc|sparc64) SHLIB_CFLAGS="-fPIC";; *) SHLIB_CFLAGS="-fpic";; esac SHLIB_LD="${CC} -shared ${SHLIB_CFLAGS}" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' AC_MSG_CHECKING(for ELF) AC_EGREP_CPP(yes, [ #ifdef __ELF__ yes #endif ], AC_MSG_RESULT(yes) [ LDFLAGS=-Wl,-export-dynamic ], AC_MSG_RESULT(no) LDFLAGS="" ) # OpenBSD doesn't do version numbers with dots. UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' TCL_LIB_VERSIONS_OK=nodots ;; FreeBSD-*) # FreeBSD 3.* and greater have ELF. SHLIB_CFLAGS="-fPIC" SHLIB_LD="ld -Bshareable -x" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" LDFLAGS="$LDFLAGS -export-dynamic" CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' if test "${TCL_THREADS}" = "1" ; then # The -pthread needs to go in the CFLAGS, not LIBS LIBS=`echo $LIBS | sed s/-pthread//` CFLAGS="$CFLAGS -pthread" LDFLAGS="$LDFLAGS -pthread" fi case $system in FreeBSD-3.*) # FreeBSD-3 doesn't handle version numbers with dots. UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so' TCL_LIB_VERSIONS_OK=nodots ;; esac ;; Darwin-*) CFLAGS_OPTIMIZE="-Os" SHLIB_CFLAGS="-fno-common" SHLIB_LD="cc -dynamiclib \${LDFLAGS}" AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [ hold_ldflags=$LDFLAGS LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no) LDFLAGS=$hold_ldflags]) if test $tcl_cv_ld_single_module = yes; then SHLIB_LD="${SHLIB_LD} -Wl,-single_module" fi SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".dylib" DL_OBJS="tclLoadDyld.o" DL_LIBS="" LDFLAGS="$LDFLAGS -prebind -headerpad_max_install_names" AC_CACHE_CHECK([if ld accepts -search_paths_first flag], tcl_cv_ld_search_paths_first, [ hold_ldflags=$LDFLAGS LDFLAGS="$LDFLAGS -Wl,-search_paths_first" AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes, tcl_cv_ld_search_paths_first=no) LDFLAGS=$hold_ldflags]) if test $tcl_cv_ld_search_paths_first = yes; then LDFLAGS="$LDFLAGS -Wl,-search_paths_first" fi CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" PLAT_OBJS='${MAC_OSX_OBJS}' PLAT_SRCS='${MAC_OSX_SRCS}' AC_MSG_CHECKING([whether to use CoreFoundation]) AC_ARG_ENABLE(corefoundation, AC_HELP_STRING([--enable-corefoundation], [use CoreFoundation API on MacOSX (default: yes)]), [tcl_corefoundation=$enableval], [tcl_corefoundation=yes]) AC_MSG_RESULT([$tcl_corefoundation]) if test $tcl_corefoundation = yes; then AC_CACHE_CHECK([for CoreFoundation.framework], tcl_cv_lib_corefoundation, [ hold_libs=$LIBS LIBS="$LIBS -framework CoreFoundation" AC_TRY_LINK([#include ], [CFBundleRef b = CFBundleGetMainBundle();], tcl_cv_lib_corefoundation=yes, tcl_cv_lib_corefoundation=no) LIBS=$hold_libs]) if test $tcl_cv_lib_corefoundation = yes; then LIBS="$LIBS -framework CoreFoundation" AC_DEFINE(HAVE_COREFOUNDATION, 1, [Do we have access to Darwin CoreFoundation.framework ?]) fi fi AC_CHECK_HEADERS(libkern/OSAtomic.h) AC_CHECK_FUNCS(OSSpinLockLock) AC_DEFINE(MAC_OSX_TCL, 1, [Is this a Mac I see before me?]) AC_DEFINE(USE_VFORK, 1, [Should we use vfork() instead of fork()?]) AC_DEFINE(TCL_DEFAULT_ENCODING,"utf-8", [Are we to override what our default encoding is?]) AC_DEFINE(MODULE_SCOPE, __private_extern__, [Linker support for module scope symbols]) AC_DEFINE(TCL_LOAD_FROM_MEMORY, 1, [Can this platform load code from memory?]) # prior to Darwin 7, realpath is not threadsafe, so don't # use it when threads are enabled, c.f. bug # 711232: AC_CHECK_FUNC(realpath) if test "$ac_cv_func_realpath" = yes -a "${TCL_THREADS}" = 1 \ -a `uname -r | awk -F. '{print [$]1}'` -lt 7 ; then ac_cv_func_realpath=no fi ;; NEXTSTEP-*) SHLIB_CFLAGS="" SHLIB_LD="cc -nostdlib -r" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadNext.o" DL_LIBS="" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; OS/390-*) CFLAGS_OPTIMIZE="" # Optimizer is buggy AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h [Should OS/390 do the right thing with sockets?]) ;; OSF1-1.0|OSF1-1.1|OSF1-1.2) # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1 SHLIB_CFLAGS="" # Hack: make package name same as library name SHLIB_LD='ld -R -export $@:' SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadOSF.o" DL_LIBS="" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; OSF1-1.*) # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 SHLIB_CFLAGS="-fPIC" if test "$SHARED_BUILD" = "1" ; then SHLIB_LD="ld -shared" else SHLIB_LD="ld -non_shared" fi SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; OSF1-V*) # Digital OSF/1 SHLIB_CFLAGS="" if test "$SHARED_BUILD" = "1" ; then SHLIB_LD='ld -shared -expect_unresolved "*"' else SHLIB_LD='ld -non_shared -expect_unresolved "*"' fi SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' if test "$GCC" = "yes" ; then CFLAGS="$CFLAGS -mieee" else CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee" fi # see pthread_intro(3) for pthread support on osf1, k.furukawa if test "${TCL_THREADS}" = "1" ; then CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" LIBS=`echo $LIBS | sed s/-lpthreads//` if test "$GCC" = "yes" ; then LIBS="$LIBS -lpthread -lmach -lexc" else CFLAGS="$CFLAGS -pthread" LDFLAGS="$LDFLAGS -pthread" fi fi ;; QNX-6*) # QNX RTP # This may work for all QNX, but it was only reported for v6. SHLIB_CFLAGS="-fPIC" SHLIB_LD="ld -Bshareable -x" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" # dlopen is in -lc on QNX DL_LIBS="" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; SCO_SV-3.2*) # Note, dlopen is available only on SCO 3.2.5 and greater. However, # this test works, since "uname -s" was non-standard in 3.2.4 and # below. if test "$GCC" = "yes" ; then SHLIB_CFLAGS="-fPIC -melf" LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" else SHLIB_CFLAGS="-Kpic -belf" LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" fi SHLIB_LD="ld -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; SINIX*5.4*) SHLIB_CFLAGS="-K PIC" SHLIB_LD="cc -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; SunOS-4*) SHLIB_CFLAGS="-PIC" SHLIB_LD="ld" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} # SunOS can't handle version numbers with dots in them in library # specs, like -ltcl7.5, so use -ltcl75 instead. Also, it # requires an extra version number at the end of .so file names. # So, the library has to have a name like libtcl75.so.1.0 SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' TCL_LIB_VERSIONS_OK=nodots ;; SunOS-5.[[0-6]]) # Careful to not let 5.10+ fall into this case # Note: If _REENTRANT isn't defined, then Solaris # won't define thread-safe library routines. AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, [Do we really want to follow the standard? Yes we do!]) SHLIB_CFLAGS="-KPIC" # Note: need the LIBS below, otherwise Tk won't find Tcl's # symbols when dynamically loaded into tclsh. SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" if test "$GCC" = "yes" ; then SHLIB_LD="$CC -shared" CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} else SHLIB_LD="/usr/ccs/bin/ld -G -z text" CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} fi ;; SunOS-5*) # Note: If _REENTRANT isn't defined, then Solaris # won't define thread-safe library routines. AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, [Do we really want to follow the standard? Yes we do!]) SHLIB_CFLAGS="-KPIC" # Check to enable 64-bit flags for compiler/linker if test "$do64bit" = "yes" ; then arch=`isainfo` if test "$arch" = "sparcv9 sparc" ; then if test "$GCC" = "yes" ; then if test "`gcc -dumpversion | awk -F. '{print [$]1}'`" -lt "3" ; then AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) else do64bit_ok=yes CFLAGS="$CFLAGS -m64 -mcpu=v9" LDFLAGS="$LDFLAGS -m64 -mcpu=v9" SHLIB_CFLAGS="-fPIC" fi else do64bit_ok=yes if test "$do64bitVIS" = "yes" ; then CFLAGS="$CFLAGS -xarch=v9a" LDFLAGS_ARCH="-xarch=v9a" else CFLAGS="$CFLAGS -xarch=v9" LDFLAGS_ARCH="-xarch=v9" fi fi elif test "$arch" = "amd64 i386" ; then if test "$GCC" = "yes" ; then AC_MSG_WARN([64bit mode not supported with GCC on $system]) else do64bit_ok=yes CFLAGS="$CFLAGS -xarch=amd64" LDFLAGS="$LDFLAGS -xarch=amd64" fi else AC_MSG_WARN([64bit mode not supported for $arch]) fi fi # Note: need the LIBS below, otherwise Tk won't find Tcl's # symbols when dynamically loaded into tclsh. SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" if test "$GCC" = "yes" ; then SHLIB_LD="$CC -shared" CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} if test "$do64bit_ok" = "yes" ; then # We need to specify -static-libgcc or we need to # add the path to the sparv9 libgcc. SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" # for finding sparcv9 libgcc, get the regular libgcc # path, remove so name and append 'sparcv9' #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" fi else SHLIB_LD="/usr/ccs/bin/ld -G -z text" CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' fi ;; UNIX_SV* | UnixWare-5*) SHLIB_CFLAGS="-KPIC" SHLIB_LD="cc -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers # that don't grok the -Bexport option. Test that it does. hold_ldflags=$LDFLAGS AC_MSG_CHECKING(for ld accepts -Bexport flag) LDFLAGS="$LDFLAGS -Wl,-Bexport" AC_TRY_LINK(, [int i;], [found=yes], [LDFLAGS=$hold_ldflags found=no]) AC_MSG_RESULT($found) CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; esac if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform]) fi if test "$do64bit" = "yes" -a "$do64bit_ok" = "yes" ; then AC_DEFINE(TCL_CFG_DO64BIT, 1, [Is this a 64-bit build?]) fi # Step 4: disable dynamic loading if requested via a command-line switch. AC_ARG_ENABLE(load, AC_HELP_STRING([--disable-load], [disallow dynamic loading and "load" command (default: enabled)]), [tcl_ok=$enableval], [tcl_ok=yes]) if test "$tcl_ok" = "no"; then DL_OBJS="" fi if test "x$DL_OBJS" != "x" ; then BUILD_DLTEST="\$(DLTEST_TARGETS)" else echo "Can't figure out how to do dynamic loading or shared libraries" echo "on this system." SHLIB_CFLAGS="" SHLIB_LD="" SHLIB_SUFFIX="" DL_OBJS="tclLoadNone.o" DL_LIBS="" LDFLAGS="$LDFLAGS_ORIG" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" BUILD_DLTEST="" fi LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" # If we're running gcc, then change the C flags for compiling shared # libraries to the right flags for gcc, instead of those for the # standard manufacturer compiler. if test "$DL_OBJS" != "tclLoadNone.o" ; then if test "$GCC" = "yes" ; then case $system in AIX-*) ;; BSD/OS*) ;; IRIX*) ;; NetBSD-*|FreeBSD-*) ;; Darwin-*) ;; RISCos-*) ;; SCO_SV-3.2*) ;; ULTRIX-4.*) ;; *) SHLIB_CFLAGS="-fPIC" ;; esac fi fi if test "$SHARED_LIB_SUFFIX" = "" ; then SHARED_LIB_SUFFIX='${VERSION}${SHLIB_SUFFIX}' fi if test "$UNSHARED_LIB_SUFFIX" = "" ; then UNSHARED_LIB_SUFFIX='${VERSION}.a' fi if test "${SHARED_BUILD}" = "1" && test "${SHLIB_SUFFIX}" != "" ; then LIB_SUFFIX=${SHARED_LIB_SUFFIX} MAKE_LIB='${SHLIB_LD} -o [$]@ ${OBJS} ${SHLIB_LD_LIBS} ${TCL_SHLIB_LD_EXTRAS} ${TK_SHLIB_LD_EXTRAS} ${LD_SEARCH_FLAGS}' INSTALL_LIB='$(INSTALL_LIBRARY) $(LIB_FILE) $(LIB_INSTALL_DIR)/$(LIB_FILE)' else LIB_SUFFIX=${UNSHARED_LIB_SUFFIX} if test "$RANLIB" = "" ; then MAKE_LIB='$(STLIB_LD) [$]@ ${OBJS}' INSTALL_LIB='$(INSTALL_LIBRARY) $(LIB_FILE) $(LIB_INSTALL_DIR)/$(LIB_FILE)' else MAKE_LIB='${STLIB_LD} [$]@ ${OBJS} ; ${RANLIB} [$]@' INSTALL_LIB='$(INSTALL_LIBRARY) $(LIB_FILE) $(LIB_INSTALL_DIR)/$(LIB_FILE) ; (cd $(LIB_INSTALL_DIR) ; $(RANLIB) $(LIB_FILE))' fi dnl Not at all clear what this was doing in Tcl's configure.in dnl or why it was needed was needed. In any event, this sort of dnl things needs to be done in the big loop above. dnl REMOVE THIS BLOCK LATER! (mdejong) dnl case $system in dnl BSD/OS*) dnl ;; dnl AIX-[[1-4]].*) dnl ;; dnl *) dnl SHLIB_LD_LIBS="" dnl ;; dnl esac fi # Stub lib does not depend on shared/static configuration if test "$RANLIB" = "" ; then MAKE_STUB_LIB='${STLIB_LD} [$]@ ${STUB_LIB_OBJS}' INSTALL_STUB_LIB='$(INSTALL_LIBRARY) $(STUB_LIB_FILE) $(LIB_INSTALL_DIR)/$(STUB_LIB_FILE)' else MAKE_STUB_LIB='${STLIB_LD} [$]@ ${STUB_LIB_OBJS} ; ${RANLIB} [$]@' INSTALL_STUB_LIB='$(INSTALL_LIBRARY) $(STUB_LIB_FILE) $(LIB_INSTALL_DIR)/$(STUB_LIB_FILE) ; (cd $(LIB_INSTALL_DIR) ; $(RANLIB) $(STUB_LIB_FILE))' fi # Define TCL_LIBS now that we know what DL_LIBS is. # The trick here is that we don't want to change # the value of TCL_LIBS if it is already set when # tclConfig.sh had been loaded by Tk. if test "x${TCL_LIBS}" = "x"; then TCL_LIBS="${DL_LIBS} ${LIBS} ${MATH_LIBS}" fi AC_SUBST(TCL_LIBS) # FIXME: This subst was left in only because the TCL_DL_LIBS # entry in tclConfig.sh uses it. It is not clear why someone # would use TCL_DL_LIBS instead of TCL_LIBS. AC_SUBST(DL_LIBS) AC_SUBST(DL_OBJS) AC_SUBST(PLAT_OBJS) AC_SUBST(PLAT_SRCS) AC_SUBST(CFLAGS) AC_SUBST(CFLAGS_DEBUG) AC_SUBST(CFLAGS_OPTIMIZE) AC_SUBST(CFLAGS_WARNING) AC_SUBST(LDFLAGS) AC_SUBST(LDFLAGS_DEBUG) AC_SUBST(LDFLAGS_OPTIMIZE) AC_SUBST(CC_SEARCH_FLAGS) AC_SUBST(LD_SEARCH_FLAGS) AC_SUBST(STLIB_LD) AC_SUBST(SHLIB_LD) AC_SUBST(TCL_SHLIB_LD_EXTRAS) AC_SUBST(TK_SHLIB_LD_EXTRAS) AC_SUBST(SHLIB_LD_LIBS) AC_SUBST(SHLIB_CFLAGS) AC_SUBST(SHLIB_SUFFIX) AC_DEFINE_UNQUOTED(TCL_SHLIB_EXT,"${SHLIB_SUFFIX}", [What is the default extension for shared libraries?]) AC_SUBST(MAKE_LIB) AC_SUBST(MAKE_STUB_LIB) AC_SUBST(INSTALL_LIB) AC_SUBST(INSTALL_STUB_LIB) AC_SUBST(RANLIB) ]) #-------------------------------------------------------------------- # SC_SERIAL_PORT # # Determine which interface to use to talk to the serial port. # Note that #include lines must begin in leftmost column for # some compilers to recognize them as preprocessor directives, # and some build environments have stdin not pointing at a # pseudo-terminal (usually /dev/null instead.) # # Arguments: # none # # Results: # # Defines only one of the following vars: # HAVE_SYS_MODEM_H # USE_TERMIOS # USE_TERMIO # USE_SGTTY # #-------------------------------------------------------------------- AC_DEFUN(SC_SERIAL_PORT, [ AC_CHECK_HEADERS(sys/modem.h) AC_MSG_CHECKING([termios vs. termio vs. sgtty]) AC_CACHE_VAL(tcl_cv_api_serial, [ AC_TRY_RUN([ #include int main() { struct termios t; if (tcgetattr(0, &t) == 0) { cfsetospeed(&t, 0); t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) if test $tcl_cv_api_serial = no ; then AC_TRY_RUN([ #include int main() { struct termio t; if (ioctl(0, TCGETA, &t) == 0) { t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) fi if test $tcl_cv_api_serial = no ; then AC_TRY_RUN([ #include int main() { struct sgttyb t; if (ioctl(0, TIOCGETP, &t) == 0) { t.sg_ospeed = 0; t.sg_flags |= ODDP | EVENP | RAW; return 0; } return 1; }], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no) fi if test $tcl_cv_api_serial = no ; then AC_TRY_RUN([ #include #include int main() { struct termios t; if (tcgetattr(0, &t) == 0 || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { cfsetospeed(&t, 0); t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) fi if test $tcl_cv_api_serial = no; then AC_TRY_RUN([ #include #include int main() { struct termio t; if (ioctl(0, TCGETA, &t) == 0 || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) fi if test $tcl_cv_api_serial = no; then AC_TRY_RUN([ #include #include int main() { struct sgttyb t; if (ioctl(0, TIOCGETP, &t) == 0 || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { t.sg_ospeed = 0; t.sg_flags |= ODDP | EVENP | RAW; return 0; } return 1; }], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) fi]) case $tcl_cv_api_serial in termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);; termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);; sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);; esac AC_MSG_RESULT($tcl_cv_api_serial) ]) #-------------------------------------------------------------------- # SC_MISSING_POSIX_HEADERS # # Supply substitutes for missing POSIX header files. Special # notes: # - stdlib.h doesn't define strtol, strtoul, or # strtod insome versions of SunOS # - some versions of string.h don't declare procedures such # as strstr # # Arguments: # none # # Results: # # Defines some of the following vars: # NO_DIRENT_H # NO_VALUES_H # HAVE_LIMITS_H or NO_LIMITS_H # NO_STDLIB_H # NO_STRING_H # NO_SYS_WAIT_H # NO_DLFCN_H # HAVE_SYS_PARAM_H # # HAVE_STRING_H ? # #-------------------------------------------------------------------- AC_DEFUN(SC_MISSING_POSIX_HEADERS, [ AC_MSG_CHECKING(dirent.h) AC_CACHE_VAL(tcl_cv_dirent_h, AC_TRY_LINK([#include #include ], [ #ifndef _POSIX_SOURCE # ifdef __Lynx__ /* * Generate compilation error to make the test fail: Lynx headers * are only valid if really in the POSIX environment. */ missing_procedure(); # endif #endif DIR *d; struct dirent *entryPtr; char *p; d = opendir("foobar"); entryPtr = readdir(d); p = entryPtr->d_name; closedir(d); ], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)) if test $tcl_cv_dirent_h = no; then AC_DEFINE(NO_DIRENT_H, 1, [Do we have ?]) fi AC_MSG_RESULT($tcl_ok) AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have ?])]) AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have ?])]) AC_CHECK_HEADER(limits.h, [AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have ?])], [AC_DEFINE(NO_LIMITS_H, 1, [Do we have ?])]) AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) if test $tcl_ok = 0; then AC_DEFINE(NO_STDLIB_H, 1, [Do we have ?]) fi AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) # See also memmove check below for a place where NO_STRING_H can be # set and why. if test $tcl_ok = 0; then AC_DEFINE(NO_STRING_H, 1, [Do we have ?]) fi AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have ?])]) AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have ?])]) # OS/390 lacks sys/param.h (and doesn't need it, by chance). AC_HAVE_HEADERS(sys/param.h) ]) #-------------------------------------------------------------------- # SC_PATH_X # # Locate the X11 header files and the X11 library archive. Try # the ac_path_x macro first, but if it doesn't find the X stuff # (e.g. because there's no xmkmf program) then check through # a list of possible directories. Under some conditions the # autoconf macro will return an include directory that contains # no include files, so double-check its result just to be safe. # # Arguments: # none # # Results: # # Sets the the following vars: # XINCLUDES # XLIBSW # #-------------------------------------------------------------------- AC_DEFUN(SC_PATH_X, [ AC_PATH_X not_really_there="" if test "$no_x" = ""; then if test "$x_includes" = ""; then AC_TRY_CPP([#include ], , not_really_there="yes") else if test ! -r $x_includes/X11/Intrinsic.h; then not_really_there="yes" fi fi fi if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then AC_MSG_CHECKING(for X11 header files) found_xincludes="no" AC_TRY_CPP([#include ], found_xincludes="yes", found_xincludes="no") if test "$found_xincludes" = "no"; then dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" for i in $dirs ; do if test -r $i/X11/Intrinsic.h; then AC_MSG_RESULT($i) XINCLUDES=" -I$i" found_xincludes="yes" break fi done fi else if test "$x_includes" != ""; then XINCLUDES="-I$x_includes" found_xincludes="yes" fi fi if test found_xincludes = "no"; then AC_MSG_RESULT(couldn't find any!) fi if test "$no_x" = yes; then AC_MSG_CHECKING(for X11 libraries) XLIBSW=nope dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" for i in $dirs ; do if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then AC_MSG_RESULT($i) XLIBSW="-L$i -lX11" x_libraries="$i" break fi done else if test "$x_libraries" = ""; then XLIBSW=-lX11 else XLIBSW="-L$x_libraries -lX11" fi fi if test "$XLIBSW" = nope ; then AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) fi if test "$XLIBSW" = nope ; then AC_MSG_RESULT(couldn't find any! Using -lX11.) XLIBSW=-lX11 fi ]) #-------------------------------------------------------------------- # SC_BLOCKING_STYLE # # The statements below check for systems where POSIX-style # non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. # On these systems (mostly older ones), use the old BSD-style # FIONBIO approach instead. # # Arguments: # none # # Results: # # Defines some of the following vars: # HAVE_SYS_IOCTL_H # HAVE_SYS_FILIO_H # USE_FIONBIO # O_NONBLOCK # #-------------------------------------------------------------------- AC_DEFUN(SC_BLOCKING_STYLE, [ AC_CHECK_HEADERS(sys/ioctl.h) AC_CHECK_HEADERS(sys/filio.h) AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) if test -f /usr/lib/NextStep/software_version; then system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` else system=`uname -s`-`uname -r` if test "$?" -ne 0 ; then system=unknown else # Special check for weird MP-RAS system (uname returns weird # results, and the version is kept in special file). if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then system=MP-RAS-`awk '{print $3}' /etc/.relid'` fi if test "`uname -s`" = "AIX" ; then system=AIX-`uname -v`.`uname -r` fi fi fi case $system in # There used to be code here to use FIONBIO under AIX. However, it # was reported that FIONBIO doesn't work under AIX 3.2.5. Since # using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO # code (JO, 5/31/97). OSF*) AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) AC_MSG_RESULT(FIONBIO) ;; SunOS-4*) AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) AC_MSG_RESULT(FIONBIO) ;; ULTRIX-4.*) AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) AC_MSG_RESULT(FIONBIO) ;; *) AC_MSG_RESULT(O_NONBLOCK) ;; esac ]) #-------------------------------------------------------------------- # SC_TIME_HANLDER # # Checks how the system deals with time.h, what time structures # are used on the system, and what fields the structures have. # # Arguments: # none # # Results: # # Defines some of the following vars: # USE_DELTA_FOR_TZ # HAVE_TM_GMTOFF # HAVE_TM_TZADJ # HAVE_TIMEZONE_VAR # #-------------------------------------------------------------------- AC_DEFUN(SC_TIME_HANDLER, [ AC_CHECK_HEADERS(sys/time.h) AC_HEADER_TIME AC_STRUCT_TIMEZONE AC_CHECK_FUNCS(gmtime_r localtime_r mktime) AC_MSG_CHECKING([tm_tzadj in struct tm]) AC_CACHE_VAL(tcl_cv_member_tm_tzadj, AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)) AC_MSG_RESULT($tcl_cv_member_tm_tzadj) if test $tcl_cv_member_tm_tzadj = yes ; then AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?]) fi AC_MSG_CHECKING([tm_gmtoff in struct tm]) AC_CACHE_VAL(tcl_cv_member_tm_gmtoff, AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)) AC_MSG_RESULT($tcl_cv_member_tm_gmtoff) if test $tcl_cv_member_tm_gmtoff = yes ; then AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?]) fi # # Its important to include time.h in this check, as some systems # (like convex) have timezone functions, etc. # AC_MSG_CHECKING([long timezone variable]) AC_CACHE_VAL(tcl_cv_var_timezone, AC_TRY_COMPILE([#include ], [extern long timezone; timezone += 1; exit (0);], tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)) AC_MSG_RESULT($tcl_cv_timezone_long) if test $tcl_cv_timezone_long = yes ; then AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) else # # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. # AC_MSG_CHECKING([time_t timezone variable]) AC_CACHE_VAL(tcl_cv_timezone_time, AC_TRY_COMPILE([#include ], [extern time_t timezone; timezone += 1; exit (0);], tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)) AC_MSG_RESULT($tcl_cv_timezone_time) if test $tcl_cv_timezone_time = yes ; then AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) fi fi ]) #-------------------------------------------------------------------- # SC_BUGGY_STRTOD # # Under Solaris 2.4, strtod returns the wrong value for the # terminating character under some conditions. Check for this # and if the problem exists use a substitute procedure # "fixstrtod" (provided by Tcl) that corrects the error. # Also, on Compaq's Tru64 Unix 5.0, # strtod(" ") returns 0.0 instead of a failure to convert. # # Arguments: # none # # Results: # # Might defines some of the following vars: # strtod (=fixstrtod) # #-------------------------------------------------------------------- AC_DEFUN(SC_BUGGY_STRTOD, [ AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) if test "$tcl_strtod" = 1; then AC_MSG_CHECKING([for Solaris2.4/Tru64 strtod bugs]) AC_CACHE_VAL(tcl_cv_strtod_buggy,[ AC_TRY_RUN([ extern double strtod(); int main() { char *infString="Inf", *nanString="NaN", *spaceString=" "; char *term; double value; value = strtod(infString, &term); if ((term != infString) && (term[-1] == 0)) { exit(1); } value = strtod(nanString, &term); if ((term != nanString) && (term[-1] == 0)) { exit(1); } value = strtod(spaceString, &term); if (term == (spaceString+1)) { exit(1); } exit(0); }], tcl_cv_strtod_buggy=1, tcl_cv_strtod_buggy=0, tcl_cv_strtod_buggy=0)]) if test "$tcl_cv_strtod_buggy" = 1; then AC_MSG_RESULT(ok) else AC_MSG_RESULT(buggy) AC_LIBOBJ([fixstrtod]) USE_COMPAT=1 AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?]) fi fi ]) #-------------------------------------------------------------------- # SC_TCL_LINK_LIBS # # Search for the libraries needed to link the Tcl shell. # Things like the math library (-lm) and socket stuff (-lsocket vs. # -lnsl) are dealt with here. # # Arguments: # None. # # Results: # # Might append to the following vars: # LIBS # MATH_LIBS # # Might define the following vars: # HAVE_NET_ERRNO_H # #-------------------------------------------------------------------- AC_DEFUN(SC_TCL_LINK_LIBS, [ #-------------------------------------------------------------------- # On a few very rare systems, all of the libm.a stuff is # already in libc.a. Set compiler flags accordingly. # Also, Linux requires the "ieee" library for math to work # right (and it must appear before "-lm"). #-------------------------------------------------------------------- AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) #-------------------------------------------------------------------- # Interactive UNIX requires -linet instead of -lsocket, plus it # needs net/errno.h to define the socket-related error codes. #-------------------------------------------------------------------- AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) AC_CHECK_HEADER(net/errno.h, [ AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have ?])]) #-------------------------------------------------------------------- # Check for the existence of the -lsocket and -lnsl libraries. # The order here is important, so that they end up in the right # order in the command line generated by make. Here are some # special considerations: # 1. Use "connect" and "accept" to check for -lsocket, and # "gethostbyname" to check for -lnsl. # 2. Use each function name only once: can't redo a check because # autoconf caches the results of the last check and won't redo it. # 3. Use -lnsl and -lsocket only if they supply procedures that # aren't already present in the normal libraries. This is because # IRIX 5.2 has libraries, but they aren't needed and they're # bogus: they goof up name resolution if used. # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. # To get around this problem, check for both libraries together # if -lsocket doesn't work by itself. #-------------------------------------------------------------------- tcl_checkBoth=0 AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) if test "$tcl_checkSocket" = 1; then AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) fi if test "$tcl_checkBoth" = 1; then tk_oldLibs=$LIBS LIBS="$LIBS -lsocket -lnsl" AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) fi AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, [LIBS="$LIBS -lnsl"])]) ]) #-------------------------------------------------------------------- # SC_TCL_EARLY_FLAGS # # Check for what flags are needed to be passed so the correct OS # features are available. # # Arguments: # None # # Results: # # Might define the following vars: # _ISOC99_SOURCE # _LARGEFILE64_SOURCE # #-------------------------------------------------------------------- AC_DEFUN(SC_TCL_EARLY_FLAG,[ AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, AC_TRY_COMPILE([[#define ]$1[ 1 ]$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then AC_DEFINE($1, 1, [Add the ]$1[ flag when building]) tcl_flags="$tcl_flags $1" fi]) AC_DEFUN(SC_TCL_EARLY_FLAGS,[ AC_MSG_CHECKING([for required early compiler flags]) tcl_flags="" SC_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], [char *p = (char *)strtoll; char *q = (char *)strtoull;]) SC_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], [struct stat64 buf; int i = stat64("/", &buf);]) SC_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include ], [char *p = (char *)open64;]) if test "x${tcl_flags}" = "x" ; then AC_MSG_RESULT(none) else AC_MSG_RESULT(${tcl_flags}) fi]) #-------------------------------------------------------------------- # SC_TCL_64BIT_FLAGS # # Check for what is defined in the way of 64-bit features. # # Arguments: # None # # Results: # # Might define the following vars: # TCL_WIDE_INT_IS_LONG # TCL_WIDE_INT_TYPE # HAVE_STRUCT_DIRENT64 # HAVE_STRUCT_STAT64 # HAVE_TYPE_OFF64_T # #-------------------------------------------------------------------- AC_DEFUN(SC_TCL_64BIT_FLAGS, [ AC_MSG_CHECKING([for 64-bit integer type]) AC_CACHE_VAL(tcl_cv_type_64bit,[ tcl_cv_type_64bit=none # See if the compiler knows natively about __int64 AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], tcl_type_64bit=__int64, tcl_type_64bit="long long") # See if we should use long anyway Note that we substitute in the # type that is our current guess for a 64-bit type inside this check # program, so it should be modified only carefully... AC_TRY_COMPILE(,[switch (0) { case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ; }],tcl_cv_type_64bit=${tcl_type_64bit})]) if test "${tcl_cv_type_64bit}" = none ; then AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?]) AC_MSG_RESULT(using long) else AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}, [What type should be used to define wide integers?]) AC_MSG_RESULT(${tcl_cv_type_64bit}) # Now check for auxiliary declarations AC_MSG_CHECKING([for struct dirent64]) AC_CACHE_VAL(tcl_cv_struct_dirent64,[ AC_TRY_COMPILE([#include #include ],[struct dirent64 p;], tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in ?]) fi AC_MSG_RESULT(${tcl_cv_struct_dirent64}) AC_MSG_CHECKING([for struct stat64]) AC_CACHE_VAL(tcl_cv_struct_stat64,[ AC_TRY_COMPILE([#include ],[struct stat64 p; ], tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) if test "x${tcl_cv_struct_stat64}" = "xyes" ; then AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in ?]) fi AC_MSG_RESULT(${tcl_cv_struct_stat64}) AC_CHECK_FUNCS(open64 lseek64) AC_MSG_CHECKING([for off64_t]) AC_CACHE_VAL(tcl_cv_type_off64_t,[ AC_TRY_COMPILE([#include ],[off64_t offset; ], tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the dnl functions lseek64 and open64 are defined. if test "x${tcl_cv_type_off64_t}" = "xyes" && \ test "x${ac_cv_func_lseek64}" = "xyes" && \ test "x${ac_cv_func_open64}" = "xyes" ; then AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in ?]) AC_MSG_RESULT(yes) else AC_MSG_RESULT(no) fi fi]) #-------------------------------------------------------------------- # SC_TCL_CFG_ENCODING TIP #59 # # Declare the encoding to use for embedded configuration information. # # Arguments: # None. # # Results: # Might append to the following vars: # DEFS (implicit) # # Will define the following vars: # TCL_CFGVAL_ENCODING # #-------------------------------------------------------------------- AC_DEFUN(SC_TCL_CFG_ENCODING, [ AC_ARG_WITH(encoding, AC_HELP_STRING([--with-encoding], [encoding for configuration values (default: iso8859-1)]), with_tcencoding=${withval}) if test x"${with_tcencoding}" != x ; then AC_DEFINE_UNQUOTED(TCL_CFGVAL_ENCODING,"${with_tcencoding}", [What encoding should be used for embedded configuration info?]) else AC_DEFINE(TCL_CFGVAL_ENCODING,"iso8859-1", [What encoding should be used for embedded configuration info?]) fi]) #-------------------------------------------------------------------- # SC_TCL_CHECK_BROKEN_FUNC # # Declare the encoding to use for embedded configuration information. # # Arguments: # funcName - function to test for # advancedTest - the advanced test to run if the function is present # # Results: # Might cause compatability versions of the function to be used. # Might affect the following vars: # USE_COMPAT (implicit) # #-------------------------------------------------------------------- AC_DEFUN(SC_TCL_CHECK_BROKEN_FUNC,[ AC_CHECK_FUNC($1, tcl_ok=1, tcl_ok=0) if test ["$tcl_ok"] = 1; then AC_MSG_CHECKING([proper ]$1[ implementation]) AC_CACHE_VAL([tcl_cv_]$1[_unbroken], AC_TRY_RUN([[int main() {]$2[}]],[tcl_cv_]$1[_unbroken]=ok, [tcl_cv_]$1[_unbroken]=broken,[tcl_cv_]$1[_unbroken]=unknown)) AC_MSG_RESULT([$tcl_cv_]$1[_unbroken]) if test ["$tcl_cv_]$1[_unbroken"] = "ok"; then tcl_ok=1 else tcl_ok=0 fi fi if test ["$tcl_ok"] = 0; then AC_LIBOBJ($1) USE_COMPAT=1 fi]) # Local Variables: # mode: autoconf # End: