#------------------------------------------------------------------------ # SC_PATH_TCLCONFIG -- # # Locate the tclConfig.sh file and perform a sanity check on # the Tcl compile flags # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --with-tcl=... # # Defines the following vars: # TCL_BIN_DIR Full path to the directory containing # the tclConfig.sh file #------------------------------------------------------------------------ AC_DEFUN([SC_PATH_TCLCONFIG], [ # # Ok, lets find the tcl configuration # First, look for one uninstalled. # the alternative search directory is invoked by --with-tcl # if test x"${no_tcl}" = x ; then # we reset no_tcl in case something fails here no_tcl=true AC_ARG_WITH(tcl, [ --with-tcl directory containing tcl configuration (tclConfig.sh)], with_tclconfig=${withval}) AC_MSG_CHECKING([for Tcl configuration]) AC_CACHE_VAL(ac_cv_c_tclconfig,[ # First check to see if --with-tcl was specified. if test x"${with_tclconfig}" != x ; then case "${with_tclconfig}" in */tclConfig.sh ) if test -f "${with_tclconfig}"; then AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" fi ;; esac if test -f "${with_tclconfig}/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" else AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) fi fi # then check for a private Tcl installation if test x"${ac_cv_c_tclconfig}" = x ; then for i in \ ../tcl \ `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ ../../tcl \ `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ ../../../tcl \ `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do if test -f "$i/unix/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" break fi done fi # on Darwin, check in Framework installation locations if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ `ls -d /Library/Frameworks 2>/dev/null` \ `ls -d /Network/Library/Frameworks 2>/dev/null` \ `ls -d /System/Library/Frameworks 2>/dev/null` \ ; do if test -f "$i/Tcl.framework/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" break fi done fi # check in a few common install locations if test x"${ac_cv_c_tclconfig}" = x ; then for i in `ls -d ${libdir} 2>/dev/null` \ `ls -d ${exec_prefix}/lib 2>/dev/null` \ `ls -d ${prefix}/lib 2>/dev/null` \ `ls -d /usr/local/lib 2>/dev/null` \ `ls -d /usr/contrib/lib 2>/dev/null` \ `ls -d /usr/lib 2>/dev/null` \ `ls -d /usr/lib64 2>/dev/null` \ ; do if test -f "$i/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd $i; pwd)`" break fi done fi # check in a few other private locations if test x"${ac_cv_c_tclconfig}" = x ; then for i in \ ${srcdir}/../tcl \ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do if test -f "$i/unix/tclConfig.sh" ; then ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" break fi done fi ]) if test x"${ac_cv_c_tclconfig}" = x ; then TCL_BIN_DIR="# no Tcl configs found" AC_MSG_ERROR([Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh]) else no_tcl= TCL_BIN_DIR="${ac_cv_c_tclconfig}" AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh]) fi fi ]) #------------------------------------------------------------------------ # SC_PATH_TKCONFIG -- # # Locate the tkConfig.sh file # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --with-tk=... # # Defines the following vars: # TK_BIN_DIR Full path to the directory containing # the tkConfig.sh file #------------------------------------------------------------------------ AC_DEFUN([SC_PATH_TKCONFIG], [ # # Ok, lets find the tk configuration # First, look for one uninstalled. # the alternative search directory is invoked by --with-tk # if test x"${no_tk}" = x ; then # we reset no_tk in case something fails here no_tk=true AC_ARG_WITH(tk, [ --with-tk directory containing tk configuration (tkConfig.sh)], with_tkconfig=${withval}) AC_MSG_CHECKING([for Tk configuration]) AC_CACHE_VAL(ac_cv_c_tkconfig,[ # First check to see if --with-tkconfig was specified. if test x"${with_tkconfig}" != x ; then case "${with_tkconfig}" in */tkConfig.sh ) if test -f "${with_tkconfig}"; then AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`" fi ;; esac if test -f "${with_tkconfig}/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`" else AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) fi fi # then check for a private Tk library if test x"${ac_cv_c_tkconfig}" = x ; then for i in \ ../tk \ `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ ../../tk \ `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ ../../../tk \ `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do if test -f "$i/unix/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" break fi done fi # on Darwin, check in Framework installation locations if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ `ls -d /Library/Frameworks 2>/dev/null` \ `ls -d /Network/Library/Frameworks 2>/dev/null` \ `ls -d /System/Library/Frameworks 2>/dev/null` \ ; do if test -f "$i/Tk.framework/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`" break fi done fi # check in a few common install locations if test x"${ac_cv_c_tkconfig}" = x ; then for i in `ls -d ${libdir} 2>/dev/null` \ `ls -d ${exec_prefix}/lib 2>/dev/null` \ `ls -d ${prefix}/lib 2>/dev/null` \ `ls -d /usr/local/lib 2>/dev/null` \ `ls -d /usr/contrib/lib 2>/dev/null` \ `ls -d /usr/lib 2>/dev/null` \ `ls -d /usr/lib64 2>/dev/null` \ ; do if test -f "$i/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd $i; pwd)`" break fi done fi # check in a few other private locations if test x"${ac_cv_c_tkconfig}" = x ; then for i in \ ${srcdir}/../tk \ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do if test -f "$i/unix/tkConfig.sh" ; then ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" break fi done fi ]) if test x"${ac_cv_c_tkconfig}" = x ; then TK_BIN_DIR="# no Tk configs found" AC_MSG_ERROR([Can't find Tk configuration definitions. Use --with-tk to specify a directory containing tkConfig.sh]) else no_tk= TK_BIN_DIR="${ac_cv_c_tkconfig}" AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh]) fi fi ]) #------------------------------------------------------------------------ # SC_LOAD_TCLCONFIG -- # # Load the tclConfig.sh file # # Arguments: # # Requires the following vars to be set: # TCL_BIN_DIR # # Results: # # Subst the following vars: # TCL_BIN_DIR # TCL_SRC_DIR # TCL_LIB_FILE # #------------------------------------------------------------------------ AC_DEFUN([SC_LOAD_TCLCONFIG], [ AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh]) if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then AC_MSG_RESULT([loading]) . "${TCL_BIN_DIR}/tclConfig.sh" else AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh]) fi # eval is required to do the TCL_DBGX substitution eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" # If the TCL_BIN_DIR is the build directory (not the install directory), # then set the common variable name to the value of the build variables. # For example, the variable TCL_LIB_SPEC will be set to the value # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC # instead of TCL_BUILD_LIB_SPEC since it will work with both an # installed and uninstalled version of Tcl. if test -f "${TCL_BIN_DIR}/Makefile" ; then TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" elif test "`uname -s`" = "Darwin"; then # If Tcl was built as a framework, attempt to use the libraries # from the framework at the given location so that linking works # against Tcl.framework installed in an arbitrary location. case ${TCL_DEFS} in *TCL_FRAMEWORK*) if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" break fi done fi if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" fi ;; esac fi # eval is required to do the TCL_DBGX substitution eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" AC_SUBST(TCL_VERSION) AC_SUBST(TCL_PATCH_LEVEL) AC_SUBST(TCL_BIN_DIR) AC_SUBST(TCL_SRC_DIR) AC_SUBST(TCL_LIB_FILE) AC_SUBST(TCL_LIB_FLAG) AC_SUBST(TCL_LIB_SPEC) AC_SUBST(TCL_STUB_LIB_FILE) AC_SUBST(TCL_STUB_LIB_FLAG) AC_SUBST(TCL_STUB_LIB_SPEC) ]) #------------------------------------------------------------------------ # SC_LOAD_TKCONFIG -- # # Load the tkConfig.sh file # # Arguments: # # Requires the following vars to be set: # TK_BIN_DIR # # Results: # # Sets the following vars that should be in tkConfig.sh: # TK_BIN_DIR #------------------------------------------------------------------------ AC_DEFUN([SC_LOAD_TKCONFIG], [ AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then AC_MSG_RESULT([loading]) . "${TK_BIN_DIR}/tkConfig.sh" else AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) fi # eval is required to do the TK_DBGX substitution eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" # If the TK_BIN_DIR is the build directory (not the install directory), # then set the common variable name to the value of the build variables. # For example, the variable TK_LIB_SPEC will be set to the value # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC # instead of TK_BUILD_LIB_SPEC since it will work with both an # installed and uninstalled version of Tcl. if test -f "${TK_BIN_DIR}/Makefile" ; then TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}" TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}" TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}" elif test "`uname -s`" = "Darwin"; then # If Tk was built as a framework, attempt to use the libraries # from the framework at the given location so that linking works # against Tk.framework installed in an arbitrary location. case ${TK_DEFS} in *TK_FRAMEWORK*) if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then for i in "`cd "${TK_BIN_DIR}"; pwd`" \ "`cd "${TK_BIN_DIR}"/../..; pwd`"; do if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}" break fi done fi if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}" TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" fi ;; esac fi # eval is required to do the TK_DBGX substitution eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" AC_SUBST(TK_VERSION) AC_SUBST(TK_BIN_DIR) AC_SUBST(TK_SRC_DIR) AC_SUBST(TK_LIB_FILE) AC_SUBST(TK_LIB_FLAG) AC_SUBST(TK_LIB_SPEC) AC_SUBST(TK_STUB_LIB_FILE) AC_SUBST(TK_STUB_LIB_FLAG) AC_SUBST(TK_STUB_LIB_SPEC) ]) #------------------------------------------------------------------------ # SC_PROG_TCLSH # Locate a tclsh shell installed on the system path. This macro # will only find a Tcl shell that already exists on the system. # It will not find a Tcl shell in the Tcl build directory or # a Tcl shell that has been installed from the Tcl build directory. # If a Tcl shell can't be located on the PATH, then TCLSH_PROG will # be set to "". Extensions should take care not to create Makefile # rules that are run by default and depend on TCLSH_PROG. An # extension can't assume that an executable Tcl shell exists at # build time. # # Arguments # none # # Results # Subst's the following values: # TCLSH_PROG #------------------------------------------------------------------------ AC_DEFUN([SC_PROG_TCLSH], [ AC_MSG_CHECKING([for tclsh]) AC_CACHE_VAL(ac_cv_path_tclsh, [ search_path=`echo ${PATH} | sed -e 's/:/ /g'` for dir in $search_path ; do for j in `ls -r $dir/tclsh[[8-9]]* 2> /dev/null` \ `ls -r $dir/tclsh* 2> /dev/null` ; do if test x"$ac_cv_path_tclsh" = x ; then if test -f "$j" ; then ac_cv_path_tclsh=$j break fi fi done done ]) if test -f "$ac_cv_path_tclsh" ; then TCLSH_PROG="$ac_cv_path_tclsh" AC_MSG_RESULT([$TCLSH_PROG]) else # It is not an error if an installed version of Tcl can't be located. TCLSH_PROG="" AC_MSG_RESULT([No tclsh found on PATH]) fi AC_SUBST(TCLSH_PROG) ]) #------------------------------------------------------------------------ # SC_BUILD_TCLSH # Determine the fully qualified path name of the tclsh executable # in the Tcl build directory. This macro will correctly determine # the name of the tclsh executable even if tclsh has not yet # been built in the build directory. The build tclsh must be used # when running tests from an extension build directory. It is not # correct to use the TCLSH_PROG in cases like this. # # Arguments # none # # Results # Subst's the following values: # BUILD_TCLSH #------------------------------------------------------------------------ AC_DEFUN([SC_BUILD_TCLSH], [ AC_MSG_CHECKING([for tclsh in Tcl build directory]) BUILD_TCLSH="${TCL_BIN_DIR}"/tclsh AC_MSG_RESULT([$BUILD_TCLSH]) AC_SUBST(BUILD_TCLSH) ]) #------------------------------------------------------------------------ # SC_ENABLE_SHARED -- # # Allows the building of shared libraries # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-shared=yes|no # # Defines the following vars: # STATIC_BUILD Used for building import/export libraries # on Windows. # # Sets the following vars: # SHARED_BUILD Value of 1 or 0 #------------------------------------------------------------------------ AC_DEFUN([SC_ENABLE_SHARED], [ AC_MSG_CHECKING([how to build libraries]) AC_ARG_ENABLE(shared, [ --enable-shared build and link with shared libraries [--enable-shared]], [tcl_ok=$enableval], [tcl_ok=yes]) if test "${enable_shared+set}" = set; then enableval="$enable_shared" tcl_ok=$enableval else tcl_ok=yes fi if test "$tcl_ok" = "yes" ; then AC_MSG_RESULT([shared]) SHARED_BUILD=1 else AC_MSG_RESULT([static]) SHARED_BUILD=0 AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?]) fi ]) #------------------------------------------------------------------------ # SC_ENABLE_FRAMEWORK -- # # Allows the building of shared libraries into frameworks # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-framework=yes|no # # Sets the following vars: # FRAMEWORK_BUILD Value of 1 or 0 #------------------------------------------------------------------------ AC_DEFUN([SC_ENABLE_FRAMEWORK], [ if test "`uname -s`" = "Darwin" ; then AC_MSG_CHECKING([how to package libraries]) AC_ARG_ENABLE(framework, [ --enable-framework package shared libraries in MacOSX frameworks [--disable-framework]], [enable_framework=$enableval], [enable_framework=no]) if test $enable_framework = yes; then if test $SHARED_BUILD = 0; then AC_MSG_WARN([Frameworks can only be built if --enable-shared is yes]) enable_framework=no fi if test $tcl_corefoundation = no; then AC_MSG_WARN([Frameworks can only be used when CoreFoundation is available]) enable_framework=no fi fi if test $enable_framework = yes; then AC_MSG_RESULT([framework]) FRAMEWORK_BUILD=1 else if test $SHARED_BUILD = 1; then AC_MSG_RESULT([shared library]) else AC_MSG_RESULT([static library]) fi FRAMEWORK_BUILD=0 fi fi ]) #------------------------------------------------------------------------ # SC_ENABLE_THREADS -- # # Specify if thread support should be enabled. TCL_THREADS is # checked so that if you are compiling an extension against a # threaded core, your extension must be compiled threaded as well. # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-threads # # Sets the following vars: # THREADS_LIBS Thread library(s) # # Defines the following vars: # TCL_THREADS # _REENTRANT # _THREAD_SAFE # #------------------------------------------------------------------------ AC_DEFUN([SC_ENABLE_THREADS], [ AC_ARG_ENABLE(threads, [ --enable-threads build with threads], [tcl_ok=$enableval], [tcl_ok=no]) if test "${TCL_THREADS}" = 1; then tcl_threaded_core=1; fi if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then TCL_THREADS=1 # USE_THREAD_ALLOC tells us to try the special thread-based # allocator that significantly reduces lock contention AC_DEFINE(USE_THREAD_ALLOC, 1, [Do we want to use the threaded memory allocator?]) AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) if test "`uname -s`" = "SunOS" ; then AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, [Do we really want to follow the standard? Yes we do!]) fi AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?]) AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) if test "$tcl_ok" = "no"; then # Check a little harder for __pthread_mutex_init in the same # library, as some systems hide it there until pthread.h is # defined. We could alternatively do an AC_TRY_COMPILE with # pthread.h, but that will work with libpthread really doesn't # exist, like AIX 4.2. [Bug: 4359] AC_CHECK_LIB(pthread, __pthread_mutex_init, tcl_ok=yes, tcl_ok=no) fi if test "$tcl_ok" = "yes"; then # The space is needed THREADS_LIBS=" -lpthread" else AC_CHECK_LIB(pthreads, pthread_mutex_init, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = "yes"; then # The space is needed THREADS_LIBS=" -lpthreads" else AC_CHECK_LIB(c, pthread_mutex_init, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = "no"; then AC_CHECK_LIB(c_r, pthread_mutex_init, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = "yes"; then # The space is needed THREADS_LIBS=" -pthread" else TCL_THREADS=0 AC_MSG_WARN([Don't know how to find pthread lib on your system - you must disable thread support or edit the LIBS in the Makefile...]) fi fi fi fi # Does the pthread-implementation provide # 'pthread_attr_setstacksize' ? ac_saved_libs=$LIBS LIBS="$LIBS $THREADS_LIBS" AC_CHECK_FUNCS(pthread_attr_setstacksize) AC_CHECK_FUNCS(pthread_atfork) LIBS=$ac_saved_libs else TCL_THREADS=0 fi # Do checking message here to not mess up interleaved configure output AC_MSG_CHECKING([for building with threads]) if test "${TCL_THREADS}" = 1; then AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?]) if test "${tcl_threaded_core}" = 1; then AC_MSG_RESULT([yes (threaded core)]) else AC_MSG_RESULT([yes]) fi else AC_MSG_RESULT([no]) fi AC_SUBST(TCL_THREADS) ]) #------------------------------------------------------------------------ # SC_ENABLE_SYMBOLS -- # # Specify if debugging symbols should be used. # Memory (TCL_MEM_DEBUG) and compile (TCL_COMPILE_DEBUG) debugging # can also be enabled. # # Arguments: # none # # Requires the following vars to be set in the Makefile: # CFLAGS_DEBUG # CFLAGS_OPTIMIZE # LDFLAGS_DEBUG # LDFLAGS_OPTIMIZE # # Results: # # Adds the following arguments to configure: # --enable-symbols # # Defines the following vars: # CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true # Sets to $(CFLAGS_OPTIMIZE) if false # LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true # Sets to $(LDFLAGS_OPTIMIZE) if false # DBGX Debug library extension # #------------------------------------------------------------------------ AC_DEFUN([SC_ENABLE_SYMBOLS], [ AC_MSG_CHECKING([for build with symbols]) AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols [--disable-symbols]], [tcl_ok=$enableval], [tcl_ok=no]) # FIXME: Currently, LDFLAGS_DEFAULT is not used, it should work like CFLAGS_DEFAULT. if test "$tcl_ok" = "no"; then CFLAGS_DEFAULT='$(CFLAGS_OPTIMIZE)' LDFLAGS_DEFAULT='$(LDFLAGS_OPTIMIZE)' DBGX="" AC_MSG_RESULT([no]) else CFLAGS_DEFAULT='$(CFLAGS_DEBUG)' LDFLAGS_DEFAULT='$(LDFLAGS_DEBUG)' DBGX=g if test "$tcl_ok" = "yes"; then AC_MSG_RESULT([yes (standard debugging)]) fi fi AC_SUBST(CFLAGS_DEFAULT) AC_SUBST(LDFLAGS_DEFAULT) if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?]) fi if test "$tcl_ok" = "compile" -o "$tcl_ok" = "all"; then AC_DEFINE(TCL_COMPILE_DEBUG, 1, [Is bytecode debugging enabled?]) AC_DEFINE(TCL_COMPILE_STATS, 1, [Are bytecode statistics enabled?]) fi if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then if test "$tcl_ok" = "all"; then AC_MSG_RESULT([enabled symbols mem compile debugging]) else AC_MSG_RESULT([enabled $tcl_ok debugging]) fi fi ]) #------------------------------------------------------------------------ # SC_ENABLE_LANGINFO -- # # Allows use of modern nl_langinfo check for better l10n. # This is only relevant for Unix. # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-langinfo=yes|no (default is yes) # # Defines the following vars: # HAVE_LANGINFO Triggers use of nl_langinfo if defined. # #------------------------------------------------------------------------ AC_DEFUN([SC_ENABLE_LANGINFO], [ AC_ARG_ENABLE(langinfo, [ --enable-langinfo use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic], [langinfo_ok=$enableval], [langinfo_ok=yes]) HAVE_LANGINFO=0 if test "$langinfo_ok" = "yes"; then AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) fi AC_MSG_CHECKING([whether to use nl_langinfo]) if test "$langinfo_ok" = "yes"; then AC_CACHE_VAL(tcl_cv_langinfo_h, [ AC_TRY_COMPILE([#include ], [nl_langinfo(CODESET);], [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])]) AC_MSG_RESULT([$tcl_cv_langinfo_h]) if test $tcl_cv_langinfo_h = yes; then AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?]) fi else AC_MSG_RESULT([$langinfo_ok]) fi ]) #-------------------------------------------------------------------- # SC_CONFIG_MANPAGES # # Decide whether to use symlinks for linking the manpages, # whether to compress the manpages after installation, and # whether to add a package name suffix to the installed # manpages to avoidfile name clashes. # If compression is enabled also find out what file name suffix # the given compression program is using. # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-man-symlinks # --enable-man-compression=PROG # --enable-man-suffix[=STRING] # # Defines the following variable: # # MAN_FLAGS - The apropriate flags for installManPage # according to the user's selection. # #-------------------------------------------------------------------- AC_DEFUN([SC_CONFIG_MANPAGES], [ AC_MSG_CHECKING([whether to use symlinks for manpages]) AC_ARG_ENABLE(man-symlinks, [ --enable-man-symlinks use symlinks for the manpages], test "$enableval" != "no" && MAN_FLAGS="$MAN_FLAGS --symlinks", enableval="no") AC_MSG_RESULT([$enableval]) AC_MSG_CHECKING([whether to compress the manpages]) AC_ARG_ENABLE(man-compression, [ --enable-man-compression=PROG compress the manpages with PROG], [case $enableval in yes) AC_MSG_ERROR([missing argument to --enable-man-compression]);; no) ;; *) MAN_FLAGS="$MAN_FLAGS --compress $enableval";; esac], enableval="no") AC_MSG_RESULT([$enableval]) if test "$enableval" != "no"; then AC_MSG_CHECKING([for compressed file suffix]) touch TeST $enableval TeST Z=`ls TeST* | sed 's/^....//'` rm -f TeST* MAN_FLAGS="$MAN_FLAGS --extension $Z" AC_MSG_RESULT([$Z]) fi AC_MSG_CHECKING([whether to add a package name suffix for the manpages]) AC_ARG_ENABLE(man-suffix, [ --enable-man-suffix=STRING use STRING as a suffix to manpage file names (default: $1)], [case $enableval in yes) enableval="$1" MAN_FLAGS="$MAN_FLAGS --suffix $enableval";; no) ;; *) MAN_FLAGS="$MAN_FLAGS --suffix $enableval";; esac], enableval="no") AC_MSG_RESULT([$enableval]) AC_SUBST(MAN_FLAGS) ]) #-------------------------------------------------------------------- # SC_CONFIG_SYSTEM # # Determine what the system is (some things cannot be easily checked # on a feature-driven basis, alas). This can usually be done via the # "uname" command, but there are a few systems, like Next, where # this doesn't work. # # Arguments: # none # # Results: # Defines the following var: # # system - System/platform/version identification code. # #-------------------------------------------------------------------- AC_DEFUN([SC_CONFIG_SYSTEM], [ AC_CACHE_CHECK([system version], tcl_cv_sys_version, [ if test -f /usr/lib/NextStep/software_version; then tcl_cv_sys_version=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` else tcl_cv_sys_version=`uname -s`-`uname -r` if test "$?" -ne 0 ; then AC_MSG_WARN([can't find uname command]) tcl_cv_sys_version=unknown else # Special check for weird MP-RAS system (uname returns weird # results, and the version is kept in special file). if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then tcl_cv_sys_version=MP-RAS-`awk '{print $[3]}' /etc/.relid` fi if test "`uname -s`" = "AIX" ; then tcl_cv_sys_version=AIX-`uname -v`.`uname -r` fi fi fi ]) system=$tcl_cv_sys_version ]) #-------------------------------------------------------------------- # SC_CONFIG_CFLAGS # # Try to determine the proper flags to pass to the compiler # for building shared libraries and other such nonsense. # # Arguments: # none # # Results: # # Defines and substitutes the following vars: # # DL_OBJS - Name of the object file that implements dynamic # loading for Tcl on this system. # DL_LIBS - Library file(s) to include in tclsh and other base # applications in order for the "load" command to work. # LDFLAGS - Flags to pass to the compiler when linking object # files into an executable application binary such # as tclsh. # LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", # that tell the run-time dynamic linker where to look # for shared libraries such as libtcl.so. Depends on # the variable LIB_RUNTIME_DIR in the Makefile. Could # be the same as CC_SEARCH_FLAGS if ${CC} is used to link. # CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib", # that tell the run-time dynamic linker where to look # for shared libraries such as libtcl.so. Depends on # the variable LIB_RUNTIME_DIR in the Makefile. # MAKE_LIB - Command to execute to build the a library; # differs when building shared or static. # MAKE_STUB_LIB - # Command to execute to build a stub library. # INSTALL_LIB - Command to execute to install a library; # differs when building shared or static. # INSTALL_STUB_LIB - # Command to execute to install a stub library. # STLIB_LD - Base command to use for combining object files # into a static library. # SHLIB_CFLAGS - Flags to pass to cc when compiling the components # of a shared library (may request position-independent # code, among other things). # SHLIB_LD - Base command to use for combining object files # into a shared library. # SHLIB_LD_LIBS - Dependent libraries for the linker to scan when # creating shared libraries. This symbol typically # goes at the end of the "ld" commands that build # shared libraries. The value of the symbol is # "${LIBS}" if all of the dependent libraries should # be specified when creating a shared library. If # dependent libraries should not be specified (as on # SunOS 4.x, where they cause the link to fail, or in # general if Tcl and Tk aren't themselves shared # libraries), then this symbol has an empty string # as its value. # SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable # extensions. An empty string means we don't know how # to use shared libraries on this platform. # TCL_SHLIB_LD_EXTRAS - Additional element which are added to SHLIB_LD_LIBS # TK_SHLIB_LD_EXTRAS for the build of Tcl and Tk, but not recorded in the # tclConfig.sh, since they are only used for the build # of Tcl and Tk. # Examples: MacOS X records the library version and # compatibility version in the shared library. But # of course the Tcl version of this is only used for Tcl. # LIB_SUFFIX - Specifies everything that comes after the "libfoo" # in a static or shared library name, using the $VERSION variable # to put the version in the right place. This is used # by platforms that need non-standard library names. # Examples: ${VERSION}.so.1.1 on NetBSD, since it needs # to have a version after the .so, and ${VERSION}.a # on AIX, since a shared library needs to have # a .a extension whereas shared objects for loadable # extensions have a .so extension. Defaults to # ${VERSION}${SHLIB_SUFFIX}. # TCL_NEEDS_EXP_FILE - # 1 means that an export file is needed to link to a # shared library. # TCL_EXP_FILE - The name of the installed export / import file which # should be used to link to the Tcl shared library. # Empty if Tcl is unshared. # TCL_BUILD_EXP_FILE - # The name of the built export / import file which # should be used to link to the Tcl shared library. # Empty if Tcl is unshared. # CFLAGS_DEBUG - # Flags used when running the compiler in debug mode # CFLAGS_OPTIMIZE - # Flags used when running the compiler in optimize mode # CFLAGS - Additional CFLAGS added as necessary (usually 64-bit) # #-------------------------------------------------------------------- AC_DEFUN([SC_CONFIG_CFLAGS], [ # Step 0.a: Enable 64 bit support? AC_MSG_CHECKING([if 64bit support is requested]) AC_ARG_ENABLE(64bit,[ --enable-64bit enable 64bit support (where applicable)], [do64bit=$enableval], [do64bit=no]) AC_MSG_RESULT([$do64bit]) # Step 0.b: Enable Solaris 64 bit VIS support? AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) AC_ARG_ENABLE(64bit-vis,[ --enable-64bit-vis enable 64bit Sparc VIS support], [do64bitVIS=$enableval], [do64bitVIS=no]) AC_MSG_RESULT([$do64bitVIS]) if test "$do64bitVIS" = "yes"; then # Force 64bit on with VIS do64bit=yes fi # Step 0.d: Disable -rpath support? AC_MSG_CHECKING([if rpath support is requested]) AC_ARG_ENABLE(rpath,[ --disable-rpath disable rpath support (default: on)], [doRpath=$enableval], [doRpath=yes]) AC_MSG_RESULT([$doRpath]) # Step 1: set the variable "system" to hold the name and version number # for the system. SC_CONFIG_SYSTEM # Step 2: check for existence of -ldl library. This is needed because # Linux can use either -ldl or -ldld for dynamic loading. AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) # Require ranlib early so we can override it in special cases below. AC_REQUIRE([AC_PROG_RANLIB]) # Step 3: set configuration options based on system name and version. do64bit_ok=no # default to '{$LIBS}' and set to "" on per-platform necessary basis SHLIB_LD_LIBS='${LIBS}' LDFLAGS_ORIG="$LDFLAGS" TCL_EXPORT_FILE_SUFFIX="" UNSHARED_LIB_SUFFIX="" TCL_TRIM_DOTS='`echo ${VERSION} | tr -d .`' ECHO_VERSION='`echo ${VERSION}`' TCL_LIB_VERSIONS_OK=ok CFLAGS_DEBUG=-g CFLAGS_OPTIMIZE=-O if test "$GCC" = "yes" ; then CFLAGS_WARNING="-Wall -fno-strict-aliasing" else CFLAGS_WARNING="" fi TCL_NEEDS_EXP_FILE=0 TCL_BUILD_EXP_FILE="" TCL_EXP_FILE="" dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed. dnl AC_CHECK_TOOL(AR, ar) AC_CHECK_PROG(AR, ar, ar) if test "${AR}" = "" ; then AC_MSG_ERROR([Required archive tool 'ar' not found on PATH.]) fi STLIB_LD='${AR} cr' LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" PLAT_OBJS="" PLAT_SRCS="" case $system in AIX-*) if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes" ; then # AIX requires the _r compiler when gcc isn't being used case "${CC}" in *_r|*_r\ *) # ok ... ;; *) # Make sure only first arg gets _r CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'` ;; esac AC_MSG_RESULT([Using $CC for compiling with threads]) fi LIBS="$LIBS -lc" SHLIB_CFLAGS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" LD_LIBRARY_PATH_VAR="LIBPATH" # Check to enable 64-bit flags for compiler/linker on AIX 4+ if test "$do64bit" = "yes" -a "`uname -v`" -gt "3" ; then if test "$GCC" = "yes" ; then AC_MSG_WARN([64bit mode not supported with GCC on $system]) else do64bit_ok=yes CFLAGS="$CFLAGS -q64" LDFLAGS="$LDFLAGS -q64" RANLIB="${RANLIB} -X64" AR="${AR} -X64" SHLIB_LD_FLAGS="-b64" fi fi if test "`uname -m`" = "ia64" ; then # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC SHLIB_LD="/usr/ccs/bin/ld -G -z text" # AIX-5 has dl* in libc.so DL_LIBS="" if test "$GCC" = "yes" ; then CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' else CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' fi LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' else if test "$GCC" = "yes" ; then SHLIB_LD="gcc -shared" else SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry" fi SHLIB_LD="${TCL_SRC_DIR}/unix/ldAix ${SHLIB_LD} ${SHLIB_LD_FLAGS}" DL_LIBS="-ldl" CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} TCL_NEEDS_EXP_FILE=1 TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.exp' fi # AIX v<=4.1 has some different flags than 4.2+ if test "$system" = "AIX-4.1" -o "`uname -v`" -lt "4" ; then LIBOBJS="$LIBOBJS tclLoadAix.o" DL_LIBS="-lld" fi # On AIX <=v4 systems, libbsd.a has to be linked in to support # non-blocking file IO. This library has to be linked in after # the MATH_LIBS or it breaks the pow() function. The way to # insure proper sequencing, is to add it to the tail of MATH_LIBS. # This library also supplies gettimeofday. # # AIX does not have a timezone field in struct tm. When the AIX # bsd library is used, the timezone global and the gettimeofday # methods are to be avoided for timezone deduction instead, we # deduce the timezone by comparing the localtime result on a # known GMT value. AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes, libbsd=no) if test $libbsd = yes; then MATH_LIBS="$MATH_LIBS -lbsd" AC_DEFINE(USE_DELTA_FOR_TZ) fi ;; BeOS*) SHLIB_CFLAGS="-fPIC" SHLIB_LD='${CC} -nostart' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" #----------------------------------------------------------- # Check for inet_ntoa in -lbind, for BeOS (which also needs # -lsocket, even if the network functions are in -lnet which # is always linked to, for compatibility. #----------------------------------------------------------- AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"]) ;; BSD/OS-2.1*|BSD/OS-3*) SHLIB_CFLAGS="" SHLIB_LD="shlicc -r" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; BSD/OS-4.*) SHLIB_CFLAGS="-export-dynamic -fPIC" SHLIB_LD='${CC} -shared' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -export-dynamic" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; CYGWIN_*) SHLIB_CFLAGS="" SHLIB_LD='${CC} -shared' SHLIB_SUFFIX=".dll" DL_OBJS="tclLoadDl.o tclWinError.o" DL_LIBS="-ldl" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" TCL_SHLIB_LD_EXTRAS='-Wl,--out-implib,$[@].a' AC_CACHE_CHECK(for Cygwin version of gcc, ac_cv_cygwin, AC_TRY_COMPILE([ #ifdef __CYGWIN__ #error cygwin #endif ], [], ac_cv_cygwin=no, ac_cv_cygwin=yes) ) if test "$ac_cv_cygwin" = "no"; then AC_MSG_ERROR([${CC} is not a cygwin compiler.]) fi ;; dgux*) SHLIB_CFLAGS="-K PIC" SHLIB_LD='${CC} -G' SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; Haiku*) LDFLAGS="$LDFLAGS -Wl,--export-dynamic" SHLIB_CFLAGS="-fPIC" SHLIB_SUFFIX=".so" SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}' DL_OBJS="tclLoadDl.o" DL_LIBS="-lroot" AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"]) ;; HP-UX-*.11.*) # Use updated header definitions where possible AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?]) AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) LIBS="$LIBS -lxnet" # Use the XOPEN network library if test "`uname -m`" = "ia64" ; then SHLIB_SUFFIX=".so" else SHLIB_SUFFIX=".sl" fi AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = yes; then SHLIB_CFLAGS="+z" SHLIB_LD="ld -b" DL_OBJS="tclLoadShl.o" DL_LIBS="-ldld" LDFLAGS="$LDFLAGS -Wl,-E" CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' LD_LIBRARY_PATH_VAR="SHLIB_PATH" fi if test "$GCC" = "yes" ; then SHLIB_LD='${CC} -shared' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} fi # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc #CFLAGS="$CFLAGS +DAportable" # Check to enable 64-bit flags for compiler/linker if test "$do64bit" = "yes" ; then if test "$GCC" = "yes" ; then case `${CC} -dumpmachine` in hppa64*) # 64-bit gcc in use. Fix flags for GNU ld. do64bit_ok=yes SHLIB_LD='${CC} -shared' if test $doRpath = yes ; then CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' fi LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} ;; *) AC_MSG_WARN([64bit mode not supported with GCC on $system]) ;; esac else do64bit_ok=yes CFLAGS="$CFLAGS +DD64" LDFLAGS="$LDFLAGS +DD64" fi fi ;; HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) SHLIB_SUFFIX=".sl" AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = yes; then SHLIB_CFLAGS="+z" SHLIB_LD="ld -b" SHLIB_LD_LIBS="" DL_OBJS="tclLoadShl.o" DL_LIBS="-ldld" LDFLAGS="$LDFLAGS -Wl,-E" CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' LD_LIBRARY_PATH_VAR="SHLIB_PATH" fi ;; IRIX-4.*) SHLIB_CFLAGS="-G 0" SHLIB_SUFFIX=".a" SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" DL_OBJS="tclLoadAout.o" DL_LIBS="" LDFLAGS="$LDFLAGS -Wl,-D,08000000" CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a' ;; IRIX-5.*) SHLIB_CFLAGS="" SHLIB_LD="ld -shared -rdata_shared" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" if test $doRpath = yes ; then CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' fi ;; IRIX-6.*) SHLIB_CFLAGS="" SHLIB_LD="ld -n32 -shared -rdata_shared" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" if test $doRpath = yes ; then CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' fi if test "$GCC" = "yes" ; then CFLAGS="$CFLAGS -mabi=n32" LDFLAGS="$LDFLAGS -mabi=n32" else case $system in IRIX-6.3) # Use to build 6.2 compatible binaries on 6.3. CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" ;; *) CFLAGS="$CFLAGS -n32" ;; esac LDFLAGS="$LDFLAGS -n32" fi ;; IRIX64-6.*) SHLIB_CFLAGS="" SHLIB_LD="ld -n32 -shared -rdata_shared" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" if test $doRpath = yes ; then CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' fi # Check to enable 64-bit flags for compiler/linker if test "$do64bit" = "yes" ; then if test "$GCC" = "yes" ; then AC_MSG_WARN([64bit mode not supported by gcc]) else do64bit_ok=yes SHLIB_LD="ld -64 -shared -rdata_shared" CFLAGS="$CFLAGS -64" LDFLAGS="$LDFLAGS -64" fi fi ;; Linux*) SHLIB_CFLAGS="-fPIC" SHLIB_SUFFIX=".so" CFLAGS_OPTIMIZE="-O2" # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings # when you inline the string and math operations. Turn this off to # get rid of the warnings. #CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" if test "$have_dl" = yes; then SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}' DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -Wl,--export-dynamic" if test $doRpath = yes ; then CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' fi LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} else AC_CHECK_HEADER(dld.h, [ SHLIB_LD="ld -shared" DL_OBJS="tclLoadDld.o" DL_LIBS="-ldld" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS=""]) fi if test "`uname -m`" = "alpha" ; then CFLAGS="$CFLAGS -mieee" fi if test $do64bit = yes; then AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [ hold_cflags=$CFLAGS CFLAGS="$CFLAGS -m64" AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no) CFLAGS=$hold_cflags]) if test $tcl_cv_cc_m64 = yes; then CFLAGS="$CFLAGS -m64" do64bit_ok=yes fi fi # The combo of gcc + glibc has a bug related # to inlining of functions like strtod(). The # -fno-builtin flag should address this problem # but it does not work. The -fno-inline flag # is kind of overkill but it works. # Disable inlining only when one of the # files in compat/*.c is being linked in. if test x"${LIBOBJS}" != x ; then CFLAGS="$CFLAGS -fno-inline" fi # XIM peeking works under XFree86. AC_DEFINE(PEEK_XCLOSEIM) ;; GNU*) SHLIB_CFLAGS="-fPIC" SHLIB_SUFFIX=".so" if test "$have_dl" = yes; then SHLIB_LD='${CC} -shared' DL_OBJS="" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -Wl,--export-dynamic" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" else AC_CHECK_HEADER(dld.h, [ SHLIB_LD="ld -shared" DL_OBJS="" DL_LIBS="-ldld" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS=""]) fi if test "`uname -m`" = "alpha" ; then CFLAGS="$CFLAGS -mieee" fi ;; Lynx*) SHLIB_CFLAGS="-fPIC" SHLIB_SUFFIX=".so" CFLAGS_OPTIMIZE=-02 SHLIB_LD='${CC} -shared' DL_OBJS="tclLoadDl.o" DL_LIBS="-mshared -ldl" LD_FLAGS="-Wl,--export-dynamic" if test $doRpath = yes ; then CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' fi ;; MP-RAS-02*) SHLIB_CFLAGS="-K PIC" SHLIB_LD='${CC} -G' SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; MP-RAS-*) SHLIB_CFLAGS="-K PIC" SHLIB_LD='${CC} -G' SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -Wl,-Bexport" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; NetBSD-1.*|FreeBSD-[[1-2]].*) # Not available on all versions: check for include file. AC_CHECK_HEADER(dlfcn.h, [ # NetBSD/SPARC needs -fPIC, -fpic will not do. SHLIB_CFLAGS="-fPIC" SHLIB_LD="ld -Bshareable -x" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" if test $doRpath = yes ; then CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' fi AC_CACHE_CHECK([for ELF], tcl_cv_ld_elf, [ AC_EGREP_CPP(yes, [ #ifdef __ELF__ yes #endif ], tcl_cv_ld_elf=yes, tcl_cv_ld_elf=no)]) if test $tcl_cv_ld_elf = yes; then SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so' else SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' fi ], [ SHLIB_CFLAGS="" SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r" SHLIB_SUFFIX=".a" DL_OBJS="tclLoadAout.o" DL_LIBS="" CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' ]) # FreeBSD doesn't handle version numbers with dots. UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' TCL_LIB_VERSIONS_OK=nodots ;; OpenBSD-*) arch=`arch -s` case "$arch" in m88k|vax) SHLIB_CFLAGS="" SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r" SHLIB_SUFFIX=".a" DL_OBJS="tclLoadAout.o" DL_LIBS="" LDFLAGS="" CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' ;; *) # OpenBSD/SPARC[64] needs -fPIC, -fpic will not do. case `machine` in sparc|sparc64) SHLIB_CFLAGS="-fPIC";; *) SHLIB_CFLAGS="-fpic";; esac SHLIB_LD="${CC} -shared ${SHLIB_CFLAGS}" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" if test $doRpath = yes ; then CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' fi LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' AC_CACHE_CHECK([for ELF], tcl_cv_ld_elf, [ AC_EGREP_CPP(yes, [ #ifdef __ELF__ yes #endif ], tcl_cv_ld_elf=yes, tcl_cv_ld_elf=no)]) if test $tcl_cv_ld_elf = yes; then LDFLAGS=-Wl,-export-dynamic else LDFLAGS="" fi ;; esac # OpenBSD doesn't do version numbers with dots. UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' TCL_LIB_VERSIONS_OK=nodots ;; NetBSD-*|FreeBSD-[[3-4]].*) # FreeBSD 3.* and greater have ELF. # NetBSD 2.* has ELF and can use 'cc -shared' to build shared libs SHLIB_CFLAGS="-fPIC" SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" LDFLAGS="$LDFLAGS -export-dynamic" if test $doRpath = yes ; then CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' fi LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} if test "${TCL_THREADS}" = "1" ; then # The -pthread needs to go in the CFLAGS, not LIBS LIBS=`echo $LIBS | sed s/-pthread//` CFLAGS="$CFLAGS -pthread" LDFLAGS="$LDFLAGS -pthread" fi case $system in FreeBSD-3.*) # FreeBSD-3 doesn't handle version numbers with dots. UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so' TCL_LIB_VERSIONS_OK=nodots ;; esac ;; FreeBSD-*) # This configuration from FreeBSD Ports. SHLIB_CFLAGS="-fPIC" SHLIB_LD="${CC} -shared" TCL_SHLIB_LD_EXTRAS="-soname \$[@]" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" LDFLAGS="" if test $doRpath = yes ; then CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' fi if test "${TCL_THREADS}" = "1" ; then # The -pthread needs to go in the LDFLAGS, not LIBS LIBS=`echo $LIBS | sed s/-pthread//` CFLAGS="$CFLAGS $PTHREAD_CFLAGS" LDFLAGS="$LDFLAGS $PTHREAD_LIBS" fi # Version numbers are dot-stripped by system policy. TCL_TRIM_DOTS=`echo ${VERSION} | tr -d .` UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1' TCL_LIB_VERSIONS_OK=nodots ;; Darwin-*) CFLAGS_OPTIMIZE="-Os" SHLIB_CFLAGS="-fno-common" # To avoid discrepancies between what headers configure sees during # preprocessing tests and compiling tests, move any -isysroot and # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`" CFLAGS="`echo " ${CFLAGS}" | \ awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`" if test $do64bit = yes; then case `arch` in ppc) AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag], tcl_cv_cc_arch_ppc64, [ hold_cflags=$CFLAGS CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes, tcl_cv_cc_arch_ppc64=no) CFLAGS=$hold_cflags]) if test $tcl_cv_cc_arch_ppc64 = yes; then CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" do64bit_ok=yes fi;; i386) AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag], tcl_cv_cc_arch_x86_64, [ hold_cflags=$CFLAGS CFLAGS="$CFLAGS -arch x86_64" AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes, tcl_cv_cc_arch_x86_64=no) CFLAGS=$hold_cflags]) if test $tcl_cv_cc_arch_x86_64 = yes; then CFLAGS="$CFLAGS -arch x86_64" do64bit_ok=yes fi;; *) AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);; esac else # Check for combined 32-bit and 64-bit fat build echo "$CFLAGS " | grep -E -q -- '-arch (ppc64|x86_64) ' && \ echo "$CFLAGS " | grep -E -q -- '-arch (ppc|i386) ' && \ fat_32_64=yes fi SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS}' AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [ hold_ldflags=$LDFLAGS LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no) LDFLAGS=$hold_ldflags]) if test $tcl_cv_ld_single_module = yes; then SHLIB_LD="${SHLIB_LD} -Wl,-single_module" fi SHLIB_SUFFIX=".dylib" DL_OBJS="tclLoadDyld.o" DL_LIBS="" # Don't use -prebind when building for Mac OS X 10.4 or later only: test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \ "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4 && \ LDFLAGS="$LDFLAGS -prebind" LDFLAGS="$LDFLAGS -headerpad_max_install_names" AC_CACHE_CHECK([if ld accepts -search_paths_first flag], tcl_cv_ld_search_paths_first, [ hold_ldflags=$LDFLAGS LDFLAGS="$LDFLAGS -Wl,-search_paths_first" AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes, tcl_cv_ld_search_paths_first=no) LDFLAGS=$hold_ldflags]) if test $tcl_cv_ld_search_paths_first = yes; then LDFLAGS="$LDFLAGS -Wl,-search_paths_first" fi CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" PLAT_OBJS=\$\(MAC\_OSX_OBJS\) PLAT_SRCS=\$\(MAC\_OSX_SRCS\) AC_MSG_CHECKING([whether to use CoreFoundation]) AC_ARG_ENABLE(corefoundation, [ --enable-corefoundation use CoreFoundation API [--enable-corefoundation]], [tcl_corefoundation=$enableval], [tcl_corefoundation=yes]) AC_MSG_RESULT([$tcl_corefoundation]) if test $tcl_corefoundation = yes; then AC_CACHE_CHECK([for CoreFoundation.framework], tcl_cv_lib_corefoundation, [ hold_libs=$LIBS if test "$fat_32_64" = yes; then for v in CFLAGS CPPFLAGS LDFLAGS; do # On Tiger there is no 64-bit CF, so remove 64-bit archs # from CFLAGS et al. while testing for presence of CF. # 64-bit CF is disabled in tclUnixPort.h if necessary. eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' done; fi LIBS="$LIBS -framework CoreFoundation" AC_TRY_LINK([#include ], [CFBundleRef b = CFBundleGetMainBundle();], tcl_cv_lib_corefoundation=yes, tcl_cv_lib_corefoundation=no) if test "$fat_32_64" = yes; then for v in CFLAGS CPPFLAGS LDFLAGS; do eval $v'="$hold_'$v'"' done; fi; LIBS=$hold_libs]) if test $tcl_cv_lib_corefoundation = yes; then LIBS="$LIBS -framework CoreFoundation" AC_DEFINE(HAVE_COREFOUNDATION) else tcl_corefoundation=no fi if test "$fat_32_64" = yes -a $tcl_corefoundation = yes; then AC_CACHE_CHECK([for 64-bit CoreFoundation], tcl_cv_lib_corefoundation_64, [ for v in CFLAGS CPPFLAGS LDFLAGS; do eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' done AC_TRY_LINK([#include ], [CFBundleRef b = CFBundleGetMainBundle();], tcl_cv_lib_corefoundation_64=yes, tcl_cv_lib_corefoundation_64=no) for v in CFLAGS CPPFLAGS LDFLAGS; do eval $v'="$hold_'$v'"' done]) if test $tcl_cv_lib_corefoundation_64 = no; then AC_DEFINE(NO_COREFOUNDATION_64) fi fi fi AC_DEFINE(MAC_OSX_TCL) ;; NEXTSTEP-*) SHLIB_CFLAGS="" SHLIB_LD='${CC} -nostdlib -r' SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadNext.o" DL_LIBS="" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; OS/390-*) SHLIB_LD_LIBS="" CFLAGS_OPTIMIZE="" # Optimizer is buggy AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h [Should OS/390 do the right thing with sockets?]) ;; OSF1-1.0|OSF1-1.1|OSF1-1.2) # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1 SHLIB_CFLAGS="" # Hack: make package name same as library name SHLIB_LD='ld -R -export $@:' SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadOSF.o" DL_LIBS="" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; OSF1-1.*) # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 SHLIB_CFLAGS="-fPIC" if test "$SHARED_BUILD" = "1" ; then SHLIB_LD="ld -shared" else SHLIB_LD="ld -non_shared" fi SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; OSF1-V*) # Digital OSF/1 SHLIB_CFLAGS="" if test "$SHARED_BUILD" = "1" ; then SHLIB_LD='ld -shared -expect_unresolved "*"' else SHLIB_LD='ld -non_shared -expect_unresolved "*"' fi SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" if test $doRpath = yes ; then CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' fi if test "$GCC" = "yes" ; then CFLAGS="$CFLAGS -mieee" else CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee" fi # see pthread_intro(3) for pthread support on osf1, k.furukawa if test "${TCL_THREADS}" = "1" ; then CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" LIBS=`echo $LIBS | sed s/-lpthreads//` if test "$GCC" = "yes" ; then LIBS="$LIBS -lpthread -lmach -lexc" else CFLAGS="$CFLAGS -pthread" LDFLAGS="$LDFLAGS -pthread" fi fi ;; QNX-6*) # QNX RTP # This may work for all QNX, but it was only reported for v6. SHLIB_CFLAGS="-fPIC" SHLIB_LD="ld -Bshareable -x" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" # dlopen is in -lc on QNX DL_LIBS="" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; RISCos-*) SHLIB_CFLAGS="-G 0" SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" SHLIB_SUFFIX=".a" DL_OBJS="tclLoadAout.o" DL_LIBS="" LDFLAGS="$LDFLAGS -Wl,-D,08000000" CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} ;; SCO_SV-3.2*) # Note, dlopen is available only on SCO 3.2.5 and greater. However, # this test works, since "uname -s" was non-standard in 3.2.4 and # below. if test "$GCC" = "yes" ; then SHLIB_CFLAGS="-fPIC -melf" LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" else SHLIB_CFLAGS="-Kpic -belf" LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" fi SHLIB_LD="ld -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; SINIX*5.4*) SHLIB_CFLAGS="-K PIC" SHLIB_LD='${CC} -G' SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; SunOS-4*) SHLIB_CFLAGS="-PIC" SHLIB_LD="ld" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} # SunOS can't handle version numbers with dots in them in library # specs, like -ltcl7.5, so use -ltcl75 instead. Also, it # requires an extra version number at the end of .so file names. # So, the library has to have a name like libtcl75.so.1.0 SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' TCL_LIB_VERSIONS_OK=nodots ;; SunOS-5.[[0-6]]) # Careful to not let 5.10+ fall into this case # Note: If _REENTRANT isn't defined, then Solaris # won't define thread-safe library routines. AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, [Do we really want to follow the standard? Yes we do!]) SHLIB_CFLAGS="-KPIC" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" if test "$GCC" = "yes" ; then SHLIB_LD='${CC} -shared' CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} else SHLIB_LD="/usr/ccs/bin/ld -G -z text" CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} fi ;; SunOS-5*) # Note: If _REENTRANT isn't defined, then Solaris # won't define thread-safe library routines. AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, [Do we really want to follow the standard? Yes we do!]) SHLIB_CFLAGS="-KPIC" # Check to enable 64-bit flags for compiler/linker if test "$do64bit" = "yes" ; then arch=`isainfo` if test "$arch" = "sparcv9 sparc" ; then if test "$GCC" = "yes" ; then if test "`gcc -dumpversion | awk -F. '{print [$]1}'`" -lt "3" ; then AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) else do64bit_ok=yes CFLAGS="$CFLAGS -m64 -mcpu=v9" LDFLAGS="$LDFLAGS -m64 -mcpu=v9" SHLIB_CFLAGS="-fPIC" fi else do64bit_ok=yes if test "$do64bitVIS" = "yes" ; then CFLAGS="$CFLAGS -xarch=v9a" LDFLAGS="$LDFLAGS -xarch=v9a" else CFLAGS="$CFLAGS -xarch=v9" LDFLAGS="$LDFLAGS -xarch=v9" fi # Solaris 64 uses this as well #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" fi elif test "$arch" = "amd64 i386" ; then if test "$GCC" = "yes" ; then case $system in SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) do64bit_ok=yes CFLAGS="$CFLAGS -m64" LDFLAGS="$LDFLAGS -m64";; *) AC_MSG_WARN([64bit mode not supported with GCC on $system]);; esac else do64bit_ok=yes case $system in SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) CFLAGS="$CFLAGS -m64" LDFLAGS="$LDFLAGS -m64";; *) CFLAGS="$CFLAGS -xarch=amd64" LDFLAGS="$LDFLAGS -xarch=amd64";; esac fi else AC_MSG_WARN([64bit mode not supported for $arch]) fi fi SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" if test "$GCC" = "yes" ; then SHLIB_LD="$CC -shared" CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} if test "$do64bit_ok" = "yes" ; then if test "$arch" = "sparcv9 sparc" ; then # We need to specify -static-libgcc or we need to # add the path to the sparv9 libgcc. SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" # for finding sparcv9 libgcc, get the regular libgcc # path, remove so name and append 'sparcv9' #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" elif test "$arch" = "amd64 i386" ; then SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" fi fi else case $system in SunOS-5.[[1-9]][[0-9]]*) SHLIB_LD='${CC} -G -z text ${LDFLAGS}';; *) SHLIB_LD="/usr/ccs/bin/ld -G -z text";; esac CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' fi ;; ULTRIX-4.*) SHLIB_CFLAGS="-G 0" SHLIB_SUFFIX=".a" SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" DL_OBJS="tclLoadAout.o" DL_LIBS="" LDFLAGS="$LDFLAGS -Wl,-D,08000000" CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} if test "$GCC" != "yes" ; then CFLAGS="$CFLAGS -DHAVE_TZSET -std1" fi ;; UNIX_SV* | UnixWare-5*) SHLIB_CFLAGS="-KPIC" SHLIB_LD='${CC} -G' SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers # that don't grok the -Bexport option. Test that it does. AC_CACHE_CHECK([for ld accepts -Bexport flag], tcl_cv_ld_Bexport, [ hold_ldflags=$LDFLAGS LDFLAGS="$LDFLAGS -Wl,-Bexport" AC_TRY_LINK(, [int i;], tcl_cv_ld_Bexport=yes, tcl_cv_ld_Bexport=no) LDFLAGS=$hold_ldflags]) if test $tcl_cv_ld_Bexport = yes; then LDFLAGS="$LDFLAGS -Wl,-Bexport" fi CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" ;; esac if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform]) fi dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so dnl # until the end of configure, as configure's compile and link tests use dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's dnl # preprocessing tests use only CPPFLAGS. SC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""]) # Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic # Loading for Tcl -- What Became of It?". Proc. 2nd Tcl/Tk Workshop, # New Orleans, LA, Computerized Processes Unlimited, 1994), then we need # to determine which of several header files defines the a.out file # format (a.out.h, sys/exec.h, or sys/exec_aout.h). At present, we # support only a file format that is more or less version-7-compatible. # In particular, # - a.out files must begin with `struct exec'. # - the N_TXTOFF on the `struct exec' must compute the seek address # of the text segment # - The `struct exec' must contain a_magic, a_text, a_data, a_bss # and a_entry fields. # The following compilation should succeed if and only if either sys/exec.h # or a.out.h is usable for the purpose. # # Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the # `struct exec' includes a second header that contains information that # duplicates the v7 fields that are needed. if test "x$DL_OBJS" = "xtclLoadAout.o" ; then AC_CACHE_CHECK([sys/exec.h], tcl_cv_sysexec_h, [ AC_TRY_COMPILE([#include ],[ struct exec foo; unsigned long seek; int flag; #if defined(__mips) || defined(mips) seek = N_TXTOFF (foo.ex_f, foo.ex_o); #else seek = N_TXTOFF (foo); #endif flag = (foo.a_magic == OMAGIC); return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; ], tcl_cv_sysexec_h=usable, tcl_cv_sysexec_h=unusable)]) if test $tcl_cv_sysexec_h = usable; then AC_DEFINE(USE_SYS_EXEC_H) else AC_CACHE_CHECK([a.out.h], tcl_cv_aout_h, [ AC_TRY_COMPILE([#include ],[ struct exec foo; unsigned long seek; int flag; #if defined(__mips) || defined(mips) seek = N_TXTOFF (foo.ex_f, foo.ex_o); #else seek = N_TXTOFF (foo); #endif flag = (foo.a_magic == OMAGIC); return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; ], tcl_cv_aout_h=usable, tcl_cv_aout_h=unusable)]) if test $tcl_cv_aout_h = usable; then AC_DEFINE(USE_A_OUT_H) else AC_CACHE_CHECK([sys/exec_aout.h], tcl_cv_sysexecaout_h, [ AC_TRY_COMPILE([#include ],[ struct exec foo; unsigned long seek; int flag; #if defined(__mips) || defined(mips) seek = N_TXTOFF (foo.ex_f, foo.ex_o); #else seek = N_TXTOFF (foo); #endif flag = (foo.a_midmag == OMAGIC); return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; ], tcl_cv_sysexecaout_h=usable, tcl_cv_sysexecaout_h=unusable)]) if test $tcl_cv_sysexecaout_h = usable; then AC_DEFINE(USE_SYS_EXEC_AOUT_H) else DL_OBJS="" fi fi fi fi # Step 5: disable dynamic loading if requested via a command-line switch. AC_ARG_ENABLE(load, [ --disable-load disallow dynamic loading and "load" command], [tcl_ok=$enableval], [tcl_ok=yes]) if test "$tcl_ok" = "no"; then DL_OBJS="" fi if test "x$DL_OBJS" != "x" ; then BUILD_DLTEST="\$(DLTEST_TARGETS)" else echo "Can't figure out how to do dynamic loading or shared libraries" echo "on this system." SHLIB_CFLAGS="" SHLIB_LD="" SHLIB_SUFFIX="" DL_OBJS="tclLoadNone.o" DL_LIBS="" LDFLAGS="$LDFLAGS_ORIG" CC_SEARCH_FLAGS="" LD_SEARCH_FLAGS="" BUILD_DLTEST="" fi # If we're running gcc, then change the C flags for compiling shared # libraries to the right flags for gcc, instead of those for the # standard manufacturer compiler. if test "$DL_OBJS" != "tclLoadNone.o" -a "$GCC" = yes ; then case $system in AIX-*) ;; BSD/OS*) ;; CYGWIN_*) ;; IRIX*) ;; NetBSD-*|FreeBSD-*|OpenBSD-*) ;; Darwin-*) ;; RISCos-*) ;; SCO_SV-3.2*) ;; ULTRIX-4.*) ;; *) SHLIB_CFLAGS="-fPIC" ;; esac fi if test "$SHARED_LIB_SUFFIX" = "" ; then SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}${SHLIB_SUFFIX}' fi if test "$UNSHARED_LIB_SUFFIX" = "" ; then UNSHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a' fi if test "${SHARED_BUILD}" = "1" && test "${SHLIB_SUFFIX}" != "" ; then LIB_SUFFIX=${SHARED_LIB_SUFFIX} MAKE_LIB='${SHLIB_LD} -o [$]@ ${OBJS} ${SHLIB_LD_LIBS} ${TCL_SHLIB_LD_EXTRAS} ${TK_SHLIB_LD_EXTRAS} ${LD_SEARCH_FLAGS}' INSTALL_LIB='$(INSTALL_LIBRARY) $(LIB_FILE) $(LIB_INSTALL_DIR)/$(LIB_FILE)' else LIB_SUFFIX=${UNSHARED_LIB_SUFFIX} if test "$RANLIB" = "" ; then MAKE_LIB='$(STLIB_LD) [$]@ ${OBJS}' INSTALL_LIB='$(INSTALL_LIBRARY) $(LIB_FILE) $(LIB_INSTALL_DIR)/$(LIB_FILE)' else MAKE_LIB='${STLIB_LD} [$]@ ${OBJS} ; ${RANLIB} [$]@' INSTALL_LIB='$(INSTALL_LIBRARY) $(LIB_FILE) $(LIB_INSTALL_DIR)/$(LIB_FILE) ; (cd $(LIB_INSTALL_DIR) ; $(RANLIB) $(LIB_FILE))' fi fi # Stub lib does not depend on shared/static configuration if test "$RANLIB" = "" ; then MAKE_STUB_LIB='${STLIB_LD} [$]@ ${STUB_LIB_OBJS}' INSTALL_STUB_LIB='$(INSTALL_LIBRARY) $(STUB_LIB_FILE) $(LIB_INSTALL_DIR)/$(STUB_LIB_FILE)' else MAKE_STUB_LIB='${STLIB_LD} [$]@ ${STUB_LIB_OBJS} ; ${RANLIB} [$]@' INSTALL_STUB_LIB='$(INSTALL_LIBRARY) $(STUB_LIB_FILE) $(LIB_INSTALL_DIR)/$(STUB_LIB_FILE) ; (cd $(LIB_INSTALL_DIR) ; $(RANLIB) $(STUB_LIB_FILE))' fi AC_SUBST(DL_LIBS) AC_SUBST(DL_OBJS) AC_SUBST(PLAT_OBJS) AC_SUBST(PLAT_SRCS) AC_SUBST(CFLAGS) AC_SUBST(CFLAGS_DEBUG) AC_SUBST(CFLAGS_OPTIMIZE) AC_SUBST(CFLAGS_WARNING) AC_SUBST(LDFLAGS) AC_SUBST(LDFLAGS_DEBUG) AC_SUBST(LDFLAGS_OPTIMIZE) AC_SUBST(CC_SEARCH_FLAGS) AC_SUBST(LD_SEARCH_FLAGS) AC_SUBST(STLIB_LD) AC_SUBST(SHLIB_LD) AC_SUBST(TCL_SHLIB_LD_EXTRAS) AC_SUBST(TK_SHLIB_LD_EXTRAS) AC_SUBST(SHLIB_LD_LIBS) AC_SUBST(SHLIB_CFLAGS) AC_SUBST(SHLIB_SUFFIX) AC_SUBST(MAKE_LIB) AC_SUBST(MAKE_STUB_LIB) AC_SUBST(INSTALL_LIB) AC_SUBST(INSTALL_STUB_LIB) AC_SUBST(RANLIB) ]) #-------------------------------------------------------------------- # SC_SERIAL_PORT # # Determine which interface to use to talk to the serial port. # Note that #include lines must begin in leftmost column for # some compilers to recognize them as preprocessor directives, # and some build environments have stdin not pointing at a # pseudo-terminal (usually /dev/null instead.) # # Arguments: # none # # Results: # # Defines only one of the following vars: # HAVE_SYS_MODEM_H # USE_TERMIOS # USE_TERMIO # USE_SGTTY # #-------------------------------------------------------------------- AC_DEFUN([SC_SERIAL_PORT], [ AC_CHECK_HEADERS(sys/modem.h) AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [ AC_TRY_RUN([ #include int main() { struct termios t; if (tcgetattr(0, &t) == 0) { cfsetospeed(&t, 0); t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) if test $tcl_cv_api_serial = no ; then AC_TRY_RUN([ #include int main() { struct termio t; if (ioctl(0, TCGETA, &t) == 0) { t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) fi if test $tcl_cv_api_serial = no ; then AC_TRY_RUN([ #include int main() { struct sgttyb t; if (ioctl(0, TIOCGETP, &t) == 0) { t.sg_ospeed = 0; t.sg_flags |= ODDP | EVENP | RAW; return 0; } return 1; }], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no) fi if test $tcl_cv_api_serial = no ; then AC_TRY_RUN([ #include #include int main() { struct termios t; if (tcgetattr(0, &t) == 0 || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { cfsetospeed(&t, 0); t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) fi if test $tcl_cv_api_serial = no; then AC_TRY_RUN([ #include #include int main() { struct termio t; if (ioctl(0, TCGETA, &t) == 0 || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) fi if test $tcl_cv_api_serial = no; then AC_TRY_RUN([ #include #include int main() { struct sgttyb t; if (ioctl(0, TIOCGETP, &t) == 0 || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { t.sg_ospeed = 0; t.sg_flags |= ODDP | EVENP | RAW; return 0; } return 1; }], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) fi]) case $tcl_cv_api_serial in termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);; termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);; sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);; esac ]) #-------------------------------------------------------------------- # SC_MISSING_POSIX_HEADERS # # Supply substitutes for missing POSIX header files. Special # notes: # - stdlib.h doesn't define strtol, strtoul, or # strtod insome versions of SunOS # - some versions of string.h don't declare procedures such # as strstr # # Arguments: # none # # Results: # # Defines some of the following vars: # NO_DIRENT_H # NO_ERRNO_H # NO_VALUES_H # HAVE_LIMITS_H or NO_LIMITS_H # NO_STDLIB_H # NO_STRING_H # NO_SYS_WAIT_H # NO_DLFCN_H # HAVE_UNISTD_H # HAVE_SYS_PARAM_H # # HAVE_STRING_H ? # #-------------------------------------------------------------------- AC_DEFUN([SC_MISSING_POSIX_HEADERS], [ AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [ AC_TRY_LINK([#include #include ], [ #ifndef _POSIX_SOURCE # ifdef __Lynx__ /* * Generate compilation error to make the test fail: Lynx headers * are only valid if really in the POSIX environment. */ missing_procedure(); # endif #endif DIR *d; struct dirent *entryPtr; char *p; d = opendir("foobar"); entryPtr = readdir(d); p = entryPtr->d_name; closedir(d); ], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)]) if test $tcl_cv_dirent_h = no; then AC_DEFINE(NO_DIRENT_H, 1, [Do we have ?]) fi AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have ?])]) AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have ?])]) AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have ?])]) AC_CHECK_HEADER(limits.h, [AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have ?])], [AC_DEFINE(NO_LIMITS_H, 1, [Do we have ?])]) AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) if test $tcl_ok = 0; then AC_DEFINE(NO_STDLIB_H, 1, [Do we have ?]) fi AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) # See also memmove check below for a place where NO_STRING_H can be # set and why. if test $tcl_ok = 0; then AC_DEFINE(NO_STRING_H, 1, [Do we have ?]) fi AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have ?])]) AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have ?])]) # OS/390 lacks sys/param.h (and doesn't need it, by chance). AC_HAVE_HEADERS(unistd.h sys/param.h) ]) #-------------------------------------------------------------------- # SC_PATH_X # # Locate the X11 header files and the X11 library archive. Try # the ac_path_x macro first, but if it doesn't find the X stuff # (e.g. because there's no xmkmf program) then check through # a list of possible directories. Under some conditions the # autoconf macro will return an include directory that contains # no include files, so double-check its result just to be safe. # # Arguments: # none # # Results: # # Sets the following vars: # XINCLUDES # XLIBSW # #-------------------------------------------------------------------- AC_DEFUN([SC_PATH_X], [ AC_PATH_X not_really_there="" if test "$no_x" = ""; then if test "$x_includes" = ""; then AC_TRY_CPP([#include ], , not_really_there="yes") else if test ! -r $x_includes/X11/Intrinsic.h; then not_really_there="yes" fi fi fi if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then AC_MSG_CHECKING([for X11 header files]) found_xincludes="no" AC_TRY_CPP([#include ], found_xincludes="yes", found_xincludes="no") if test "$found_xincludes" = "no"; then dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" for i in $dirs ; do if test -r $i/X11/Intrinsic.h; then AC_MSG_RESULT([$i]) XINCLUDES=" -I$i" found_xincludes="yes" break fi done fi else if test "$x_includes" != ""; then XINCLUDES="-I$x_includes" found_xincludes="yes" fi fi if test "$found_xincludes" = "no"; then AC_MSG_RESULT([couldn't find any!]) fi if test "$no_x" = yes; then AC_MSG_CHECKING([for X11 libraries]) XLIBSW=nope dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" for i in $dirs ; do if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then AC_MSG_RESULT([$i]) XLIBSW="-L$i -lX11" x_libraries="$i" break fi done else if test "$x_libraries" = ""; then XLIBSW=-lX11 else XLIBSW="-L$x_libraries -lX11" fi fi if test "$XLIBSW" = nope ; then AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) fi if test "$XLIBSW" = nope ; then AC_MSG_RESULT([could not find any! Using -lX11.]) XLIBSW=-lX11 fi ]) #-------------------------------------------------------------------- # SC_BLOCKING_STYLE # # The statements below check for systems where POSIX-style # non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. # On these systems (mostly older ones), use the old BSD-style # FIONBIO approach instead. # # Arguments: # none # # Results: # # Defines some of the following vars: # HAVE_SYS_IOCTL_H # HAVE_SYS_FILIO_H # USE_FIONBIO # O_NONBLOCK # #-------------------------------------------------------------------- AC_DEFUN([SC_BLOCKING_STYLE], [ AC_CHECK_HEADERS(sys/ioctl.h) AC_CHECK_HEADERS(sys/filio.h) SC_CONFIG_SYSTEM AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) case $system in OSF*) AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) AC_MSG_RESULT([FIONBIO]) ;; SunOS-4*) AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) AC_MSG_RESULT([FIONBIO]) ;; ULTRIX-4.*) AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) AC_MSG_RESULT([FIONBIO]) ;; *) AC_MSG_RESULT([O_NONBLOCK]) ;; esac ]) #-------------------------------------------------------------------- # SC_TIME_HANLDER # # Checks how the system deals with time.h, what time structures # are used on the system, and what fields the structures have. # # Arguments: # none # # Results: # # Defines some of the following vars: # USE_DELTA_FOR_TZ # HAVE_TM_GMTOFF # HAVE_TM_TZADJ # HAVE_TIMEZONE_VAR # #-------------------------------------------------------------------- AC_DEFUN([SC_TIME_HANDLER], [ AC_CHECK_HEADERS(sys/time.h) AC_HEADER_TIME AC_STRUCT_TIMEZONE AC_CHECK_FUNCS(gmtime_r localtime_r) AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [ AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)]) if test $tcl_cv_member_tm_tzadj = yes ; then AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?]) fi AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [ AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)]) if test $tcl_cv_member_tm_gmtoff = yes ; then AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?]) fi # # Its important to include time.h in this check, as some systems # (like convex) have timezone functions, etc. # AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [ AC_TRY_COMPILE([#include ], [extern long timezone; timezone += 1; exit (0);], tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)]) if test $tcl_cv_timezone_long = yes ; then AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) else # # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. # AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [ AC_TRY_COMPILE([#include ], [extern time_t timezone; timezone += 1; exit (0);], tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)]) if test $tcl_cv_timezone_time = yes ; then AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) fi fi ]) #-------------------------------------------------------------------- # SC_BUGGY_STRTOD # # Under Solaris 2.4, strtod returns the wrong value for the # terminating character under some conditions. Check for this # and if the problem exists use a substitute procedure # "fixstrtod" (provided by Tcl) that corrects the error. # Also, on Compaq's Tru64 Unix 5.0, # strtod(" ") returns 0.0 instead of a failure to convert. # # Arguments: # none # # Results: # # Might defines some of the following vars: # strtod (=fixstrtod) # #-------------------------------------------------------------------- AC_DEFUN([SC_BUGGY_STRTOD], [ AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) if test "$tcl_strtod" = 1; then AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[ AC_TRY_RUN([ extern double strtod(); int main() { char *infString="Inf", *nanString="NaN", *spaceString=" "; char *term; double value; value = strtod(infString, &term); if ((term != infString) && (term[-1] == 0)) { exit(1); } value = strtod(nanString, &term); if ((term != nanString) && (term[-1] == 0)) { exit(1); } value = strtod(spaceString, &term); if (term == (spaceString+1)) { exit(1); } exit(0); }], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy, tcl_cv_strtod_buggy=buggy)]) if test "$tcl_cv_strtod_buggy" = buggy; then LIBOBJS="$LIBOBJS fixstrtod.o" AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?]) fi fi ]) #-------------------------------------------------------------------- # SC_TCL_LINK_LIBS # # Search for the libraries needed to link the Tcl shell. # Things like the math library (-lm) and socket stuff (-lsocket vs. # -lnsl) are dealt with here. # # Arguments: # Requires the following vars to be set in the Makefile: # DL_LIBS # LIBS # MATH_LIBS # # Results: # # Subst's the following var: # TCL_LIBS # MATH_LIBS # # Might append to the following vars: # LIBS # # Might define the following vars: # HAVE_NET_ERRNO_H # #-------------------------------------------------------------------- AC_DEFUN([SC_TCL_LINK_LIBS], [ #-------------------------------------------------------------------- # On a few very rare systems, all of the libm.a stuff is # already in libc.a. Set compiler flags accordingly. # Also, Linux requires the "ieee" library for math to work # right (and it must appear before "-lm"). #-------------------------------------------------------------------- AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) #-------------------------------------------------------------------- # Interactive UNIX requires -linet instead of -lsocket, plus it # needs net/errno.h to define the socket-related error codes. #-------------------------------------------------------------------- AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) AC_CHECK_HEADER(net/errno.h, [ AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have ?])]) #-------------------------------------------------------------------- # Check for the existence of the -lsocket and -lnsl libraries. # The order here is important, so that they end up in the right # order in the command line generated by make. Here are some # special considerations: # 1. Use "connect" and "accept" to check for -lsocket, and # "gethostbyname" to check for -lnsl. # 2. Use each function name only once: can't redo a check because # autoconf caches the results of the last check and won't redo it. # 3. Use -lnsl and -lsocket only if they supply procedures that # aren't already present in the normal libraries. This is because # IRIX 5.2 has libraries, but they aren't needed and they're # bogus: they goof up name resolution if used. # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. # To get around this problem, check for both libraries together # if -lsocket doesn't work by itself. #-------------------------------------------------------------------- tcl_checkBoth=0 AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) if test "$tcl_checkSocket" = 1; then AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) fi if test "$tcl_checkBoth" = 1; then tk_oldLibs=$LIBS LIBS="$LIBS -lsocket -lnsl" AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) fi AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, [LIBS="$LIBS -lnsl"])]) # Don't perform the eval of the libraries here because DL_LIBS # won't be set until we call SC_CONFIG_CFLAGS TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' AC_SUBST(TCL_LIBS) AC_SUBST(MATH_LIBS) ]) #-------------------------------------------------------------------- # SC_TCL_EARLY_FLAGS # # Check for what flags are needed to be passed so the correct OS # features are available. # # Arguments: # None # # Results: # # Might define the following vars: # _ISOC99_SOURCE # _LARGEFILE64_SOURCE # _LARGEFILE_SOURCE64 # #-------------------------------------------------------------------- AC_DEFUN([SC_TCL_EARLY_FLAG],[ AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, AC_TRY_COMPILE([[#define ]$1[ 1 ]$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then AC_DEFINE($1, 1, [Add the ]$1[ flag when building]) tcl_flags="$tcl_flags $1" fi ]) AC_DEFUN([SC_TCL_EARLY_FLAGS],[ AC_MSG_CHECKING([for required early compiler flags]) tcl_flags="" SC_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], [char *p = (char *)strtoll; char *q = (char *)strtoull;]) SC_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], [struct stat64 buf; int i = stat64("/", &buf);]) SC_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include ], [char *p = (char *)open64;]) if test "x${tcl_flags}" = "x" ; then AC_MSG_RESULT([none]) else AC_MSG_RESULT([${tcl_flags}]) fi ]) #-------------------------------------------------------------------- # SC_TCL_64BIT_FLAGS # # Check for what is defined in the way of 64-bit features. # # Arguments: # None # # Results: # # Might define the following vars: # TCL_WIDE_INT_IS_LONG # TCL_WIDE_INT_TYPE # HAVE_STRUCT_DIRENT64 # HAVE_STRUCT_STAT64 # HAVE_TYPE_OFF64_T # #-------------------------------------------------------------------- AC_DEFUN([SC_TCL_64BIT_FLAGS], [ AC_MSG_CHECKING([for 64-bit integer type]) AC_CACHE_VAL(tcl_cv_type_64bit,[ tcl_cv_type_64bit=none # See if the compiler knows natively about __int64 AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], tcl_type_64bit=__int64, tcl_type_64bit="long long") # See if we should use long anyway Note that we substitute in the # type that is our current guess for a 64-bit type inside this check # program, so it should be modified only carefully... AC_TRY_COMPILE(,[switch (0) { case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ; }],tcl_cv_type_64bit=${tcl_type_64bit})]) if test "${tcl_cv_type_64bit}" = none ; then AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?]) AC_MSG_RESULT([using long]) else AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}, [What type should be used to define wide integers?]) AC_MSG_RESULT([${tcl_cv_type_64bit}]) # Now check for auxiliary declarations AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[ AC_TRY_COMPILE([#include #include ],[struct dirent64 p;], tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in ?]) fi AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[ AC_TRY_COMPILE([#include ],[struct stat64 p; ], tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) if test "x${tcl_cv_struct_stat64}" = "xyes" ; then AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in ?]) fi AC_CHECK_FUNCS(open64 lseek64) AC_MSG_CHECKING([for off64_t]) AC_CACHE_VAL(tcl_cv_type_off64_t,[ AC_TRY_COMPILE([#include ],[off64_t offset; ], tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the dnl functions lseek64 and open64 are defined. if test "x${tcl_cv_type_off64_t}" = "xyes" && \ test "x${ac_cv_func_lseek64}" = "xyes" && \ test "x${ac_cv_func_open64}" = "xyes" ; then AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in ?]) AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi fi ]) #-------------------------------------------------------------------- # SC_TCL_GETHOSTBYADDR_R # # Check if we have MT-safe variant of gethostbyaddr(). # # Arguments: # None # # Results: # # Might define the following vars: # HAVE_GETHOSTBYADDR_R # HAVE_GETHOSTBYADDR_R_7 # HAVE_GETHOSTBYADDR_R_8 # #-------------------------------------------------------------------- AC_DEFUN([SC_TCL_GETHOSTBYADDR_R], [AC_CHECK_FUNC(gethostbyaddr_r, [ AC_CACHE_CHECK([for gethostbyaddr_r with 7 args], tcl_cv_api_gethostbyaddr_r_7, [ AC_TRY_COMPILE([ #include ], [ char *addr; int length; int type; struct hostent *result; char buffer[2048]; int buflen = 2048; int h_errnop; (void) gethostbyaddr_r(addr, length, type, result, buffer, buflen, &h_errnop); ], tcl_cv_api_gethostbyaddr_r_7=yes, tcl_cv_api_gethostbyaddr_r_7=no)]) tcl_ok=$tcl_cv_api_gethostbyaddr_r_7 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETHOSTBYADDR_R_7, 1, [Define to 1 if gethostbyaddr_r takes 7 args.]) else AC_CACHE_CHECK([for gethostbyaddr_r with 8 args], tcl_cv_api_gethostbyaddr_r_8, [ AC_TRY_COMPILE([ #include ], [ char *addr; int length; int type; struct hostent *result, *resultp; char buffer[2048]; int buflen = 2048; int h_errnop; (void) gethostbyaddr_r(addr, length, type, result, buffer, buflen, &resultp, &h_errnop); ], tcl_cv_api_gethostbyaddr_r_8=yes, tcl_cv_api_gethostbyaddr_r_8=no)]) tcl_ok=$tcl_cv_api_gethostbyaddr_r_8 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETHOSTBYADDR_R_8, 1, [Define to 1 if gethostbyaddr_r takes 8 args.]) fi fi if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETHOSTBYADDR_R, 1, [Define to 1 if gethostbyaddr_r is available.]) fi ])]) #-------------------------------------------------------------------- # SC_TCL_GETHOSTBYNAME_R # # Check to see what variant of gethostbyname_r() we have. # Based on David Arnold's example from the comp.programming.threads # FAQ Q213 # # Arguments: # None # # Results: # # Might define the following vars: # HAVE_GETHOSTBYADDR_R # HAVE_GETHOSTBYADDR_R_3 # HAVE_GETHOSTBYADDR_R_5 # HAVE_GETHOSTBYADDR_R_6 # #-------------------------------------------------------------------- AC_DEFUN([SC_TCL_GETHOSTBYNAME_R], [AC_CHECK_FUNC(gethostbyname_r, [ AC_CACHE_CHECK([for gethostbyname_r with 6 args], tcl_cv_api_gethostbyname_r_6, [ AC_TRY_COMPILE([ #include ], [ char *name; struct hostent *he, *res; char buffer[2048]; int buflen = 2048; int h_errnop; (void) gethostbyname_r(name, he, buffer, buflen, &res, &h_errnop); ], tcl_cv_api_gethostbyname_r_6=yes, tcl_cv_api_gethostbyname_r_6=no)]) tcl_ok=$tcl_cv_api_gethostbyname_r_6 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETHOSTBYNAME_R_6, 1, [Define to 1 if gethostbyname_r takes 6 args.]) else AC_CACHE_CHECK([for gethostbyname_r with 5 args], tcl_cv_api_gethostbyname_r_5, [ AC_TRY_COMPILE([ #include ], [ char *name; struct hostent *he; char buffer[2048]; int buflen = 2048; int h_errnop; (void) gethostbyname_r(name, he, buffer, buflen, &h_errnop); ], tcl_cv_api_gethostbyname_r_5=yes, tcl_cv_api_gethostbyname_r_5=no)]) tcl_ok=$tcl_cv_api_gethostbyname_r_5 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETHOSTBYNAME_R_5, 1, [Define to 1 if gethostbyname_r takes 5 args.]) else AC_CACHE_CHECK([for gethostbyname_r with 3 args], tcl_cv_api_gethostbyname_r_3, [ AC_TRY_COMPILE([ #include ], [ char *name; struct hostent *he; struct hostent_data data; (void) gethostbyname_r(name, he, &data); ], tcl_cv_api_gethostbyname_r_3=yes, tcl_cv_api_gethostbyname_r_3=no)]) tcl_ok=$tcl_cv_api_gethostbyname_r_3 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETHOSTBYNAME_R_3, 1, [Define to 1 if gethostbyname_r takes 3 args.]) fi fi fi if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETHOSTBYNAME_R, 1, [Define to 1 if gethostbyname_r is available.]) fi ])]) #-------------------------------------------------------------------- # SC_TCL_GETPWUID_R # # Check if we have MT-safe variant of getpwuid() and if yes, # which one exactly. # # Arguments: # None # # Results: # # Might define the following vars: # HAVE_GETPWUID_R # HAVE_GETPWUID_R_4 # HAVE_GETPWUID_R_5 # #-------------------------------------------------------------------- AC_DEFUN([SC_TCL_GETPWUID_R], [AC_CHECK_FUNC(getpwuid_r, [ AC_CACHE_CHECK([for getpwuid_r with 5 args], tcl_cv_api_getpwuid_r_5, [ AC_TRY_COMPILE([ #include #include ], [ uid_t uid; struct passwd pw, *pwp; char buf[512]; int buflen = 512; (void) getpwuid_r(uid, &pw, buf, buflen, &pwp); ], tcl_cv_api_getpwuid_r_5=yes, tcl_cv_api_getpwuid_r_5=no)]) tcl_ok=$tcl_cv_api_getpwuid_r_5 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETPWUID_R_5, 1, [Define to 1 if getpwuid_r takes 5 args.]) else AC_CACHE_CHECK([for getpwuid_r with 4 args], tcl_cv_api_getpwuid_r_4, [ AC_TRY_COMPILE([ #include #include ], [ uid_t uid; struct passwd pw; char buf[512]; int buflen = 512; (void)getpwnam_r(uid, &pw, buf, buflen); ], tcl_cv_api_getpwuid_r_4=yes, tcl_cv_api_getpwuid_r_4=no)]) tcl_ok=$tcl_cv_api_getpwuid_r_4 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETPWUID_R_4, 1, [Define to 1 if getpwuid_r takes 4 args.]) fi fi if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETPWUID_R, 1, [Define to 1 if getpwuid_r is available.]) fi ])]) #-------------------------------------------------------------------- # SC_TCL_GETPWNAM_R # # Check if we have MT-safe variant of getpwnam() and if yes, # which one exactly. # # Arguments: # None # # Results: # # Might define the following vars: # HAVE_GETPWNAM_R # HAVE_GETPWNAM_R_4 # HAVE_GETPWNAM_R_5 # #-------------------------------------------------------------------- AC_DEFUN([SC_TCL_GETPWNAM_R], [AC_CHECK_FUNC(getpwnam_r, [ AC_CACHE_CHECK([for getpwnam_r with 5 args], tcl_cv_api_getpwnam_r_5, [ AC_TRY_COMPILE([ #include #include ], [ char *name; struct passwd pw, *pwp; char buf[512]; int buflen = 512; (void) getpwnam_r(name, &pw, buf, buflen, &pwp); ], tcl_cv_api_getpwnam_r_5=yes, tcl_cv_api_getpwnam_r_5=no)]) tcl_ok=$tcl_cv_api_getpwnam_r_5 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETPWNAM_R_5, 1, [Define to 1 if getpwnam_r takes 5 args.]) else AC_CACHE_CHECK([for getpwnam_r with 4 args], tcl_cv_api_getpwnam_r_4, [ AC_TRY_COMPILE([ #include #include ], [ char *name; struct passwd pw; char buf[512]; int buflen = 512; (void)getpwnam_r(name, &pw, buf, buflen); ], tcl_cv_api_getpwnam_r_4=yes, tcl_cv_api_getpwnam_r_4=no)]) tcl_ok=$tcl_cv_api_getpwnam_r_4 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETPWNAM_R_4, 1, [Define to 1 if getpwnam_r takes 4 args.]) fi fi if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETPWNAM_R, 1, [Define to 1 if getpwnam_r is available.]) fi ])]) #-------------------------------------------------------------------- # SC_TCL_GETGRGID_R # # Check if we have MT-safe variant of getgrgid() and if yes, # which one exactly. # # Arguments: # None # # Results: # # Might define the following vars: # HAVE_GETGRGID_R # HAVE_GETGRGID_R_4 # HAVE_GETGRGID_R_5 # #-------------------------------------------------------------------- AC_DEFUN([SC_TCL_GETGRGID_R], [AC_CHECK_FUNC(getgrgid_r, [ AC_CACHE_CHECK([for getgrgid_r with 5 args], tcl_cv_api_getgrgid_r_5, [ AC_TRY_COMPILE([ #include #include ], [ gid_t gid; struct group gr, *grp; char buf[512]; int buflen = 512; (void) getgrgid_r(gid, &gr, buf, buflen, &grp); ], tcl_cv_api_getgrgid_r_5=yes, tcl_cv_api_getgrgid_r_5=no)]) tcl_ok=$tcl_cv_api_getgrgid_r_5 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETGRGID_R_5, 1, [Define to 1 if getgrgid_r takes 5 args.]) else AC_CACHE_CHECK([for getgrgid_r with 4 args], tcl_cv_api_getgrgid_r_4, [ AC_TRY_COMPILE([ #include #include ], [ gid_t gid; struct group gr; char buf[512]; int buflen = 512; (void)getgrgid_r(gid, &gr, buf, buflen); ], tcl_cv_api_getgrgid_r_4=yes, tcl_cv_api_getgrgid_r_4=no)]) tcl_ok=$tcl_cv_api_getgrgid_r_4 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETGRGID_R_4, 1, [Define to 1 if getgrgid_r takes 4 args.]) fi fi if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETGRGID_R, 1, [Define to 1 if getgrgid_r is available.]) fi ])]) #-------------------------------------------------------------------- # SC_TCL_GETGRNAM_R # # Check if we have MT-safe variant of getgrnam() and if yes, # which one exactly. # # Arguments: # None # # Results: # # Might define the following vars: # HAVE_GETGRNAM_R # HAVE_GETGRNAM_R_4 # HAVE_GETGRNAM_R_5 # #-------------------------------------------------------------------- AC_DEFUN([SC_TCL_GETGRNAM_R], [AC_CHECK_FUNC(getgrnam_r, [ AC_CACHE_CHECK([for getgrnam_r with 5 args], tcl_cv_api_getgrnam_r_5, [ AC_TRY_COMPILE([ #include #include ], [ char *name; struct group gr, *grp; char buf[512]; int buflen = 512; (void) getgrnam_r(name, &gr, buf, buflen, &grp); ], tcl_cv_api_getgrnam_r_5=yes, tcl_cv_api_getgrnam_r_5=no)]) tcl_ok=$tcl_cv_api_getgrnam_r_5 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETGRNAM_R_5, 1, [Define to 1 if getgrnam_r takes 5 args.]) else AC_CACHE_CHECK([for getgrnam_r with 4 args], tcl_cv_api_getgrnam_r_4, [ AC_TRY_COMPILE([ #include #include ], [ char *name; struct group gr; char buf[512]; int buflen = 512; (void)getgrnam_r(name, &gr, buf, buflen); ], tcl_cv_api_getgrnam_r_4=yes, tcl_cv_api_getgrnam_r_4=no)]) tcl_ok=$tcl_cv_api_getgrnam_r_4 if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETGRNAM_R_4, 1, [Define to 1 if getgrnam_r takes 4 args.]) fi fi if test "$tcl_ok" = yes; then AC_DEFINE(HAVE_GETGRNAM_R, 1, [Define to 1 if getgrnam_r is available.]) fi ])]) #-------------------------------------------------------------------- # SC_CONFIG_COMMANDS_PRE(CMDS) # # Replacement for autoconf 2.5x AC_COMMANDS_PRE: # Commands to run right before config.status is # created. Accumulates. # # Requires presence of SC_OUTPUT_COMMANDS_PRE at the end # of configure.in (right before AC_OUTPUT). # #-------------------------------------------------------------------- AC_DEFUN([SC_CONFIG_COMMANDS_PRE], [ define([SC_OUTPUT_COMMANDS_PRE], defn([SC_OUTPUT_COMMANDS_PRE])[$1 ])]) AC_DEFUN([SC_OUTPUT_COMMANDS_PRE]) # Local Variables: # mode: autoconf # End: