/* * tclUnixFCmd.c * * This file implements the unix specific portion of file manipulation * subcommands of the "file" command. All filename arguments should * already be translated to native format. * * Copyright (c) 1996-1998 Sun Microsystems, Inc. * * See the file "license.terms" for information on usage and redistribution of * this file, and for a DISCLAIMER OF ALL WARRANTIES. * * Portions of this code were derived from NetBSD source code which has the * following copyright notice: * * Copyright (c) 1988, 1993, 1994 * The Regents of the University of California. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors may * be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH * DAMAGE. */ #include "tclInt.h" #ifndef HAVE_STRUCT_STAT_ST_BLKSIZE #ifndef NO_FSTATFS #include #endif #endif /* !HAVE_STRUCT_STAT_ST_BLKSIZE */ #ifdef HAVE_FTS #include #endif /* * The following constants specify the type of callback when * TraverseUnixTree() calls the traverseProc() */ #define DOTREE_PRED 1 /* pre-order directory */ #define DOTREE_POSTD 2 /* post-order directory */ #define DOTREE_F 3 /* regular file */ /* * Fallback temporary file location the temporary file generation code. Can be * overridden at compile time for when it is known that temp files can't be * written to /tmp (hello, iOS!). */ #ifndef TCL_TEMPORARY_FILE_DIRECTORY #define TCL_TEMPORARY_FILE_DIRECTORY "/tmp" #endif /* * Callbacks for file attributes code. */ static int GetGroupAttribute(Tcl_Interp *interp, int objIndex, Tcl_Obj *fileName, Tcl_Obj **attributePtrPtr); static int GetOwnerAttribute(Tcl_Interp *interp, int objIndex, Tcl_Obj *fileName, Tcl_Obj **attributePtrPtr); static int GetPermissionsAttribute(Tcl_Interp *interp, int objIndex, Tcl_Obj *fileName, Tcl_Obj **attributePtrPtr); static int SetGroupAttribute(Tcl_Interp *interp, int objIndex, Tcl_Obj *fileName, Tcl_Obj *attributePtr); static int SetOwnerAttribute(Tcl_Interp *interp, int objIndex, Tcl_Obj *fileName, Tcl_Obj *attributePtr); static int SetPermissionsAttribute(Tcl_Interp *interp, int objIndex, Tcl_Obj *fileName, Tcl_Obj *attributePtr); static int GetModeFromPermString(Tcl_Interp *interp, const char *modeStringPtr, mode_t *modePtr); #if defined(HAVE_CHFLAGS) && defined(UF_IMMUTABLE) || defined(__CYGWIN__) static int GetUnixFileAttributes(Tcl_Interp *interp, int objIndex, Tcl_Obj *fileName, Tcl_Obj **attributePtrPtr); static int SetUnixFileAttributes(Tcl_Interp *interp, int objIndex, Tcl_Obj *fileName, Tcl_Obj *attributePtr); #endif /* * Prototype for the TraverseUnixTree callback function. */ typedef int (TraversalProc)(Tcl_DString *srcPtr, Tcl_DString *dstPtr, const Tcl_StatBuf *statBufPtr, int type, Tcl_DString *errorPtr); /* * Constants and variables necessary for file attributes subcommand. * * IMPORTANT: The permissions attribute is assumed to be the third item (i.e. * to be indexed with '2' in arrays) in code in tclIOUtil.c and possibly * elsewhere in Tcl's core. */ #ifdef DJGPP /* * See contrib/djgpp/tclDjgppFCmd.c for definition. */ extern TclFileAttrProcs tclpFileAttrProcs[]; extern const char *const tclpFileAttrStrings[]; #else /* !DJGPP */ enum { #if defined(__CYGWIN__) UNIX_ARCHIVE_ATTRIBUTE, #endif UNIX_GROUP_ATTRIBUTE, #if defined(__CYGWIN__) UNIX_HIDDEN_ATTRIBUTE, #endif UNIX_OWNER_ATTRIBUTE, UNIX_PERMISSIONS_ATTRIBUTE, #if defined(HAVE_CHFLAGS) && defined(UF_IMMUTABLE) || defined(__CYGWIN__) UNIX_READONLY_ATTRIBUTE, #endif #if defined(__CYGWIN__) UNIX_SYSTEM_ATTRIBUTE, #endif #ifdef MAC_OSX_TCL MACOSX_CREATOR_ATTRIBUTE, MACOSX_TYPE_ATTRIBUTE, MACOSX_HIDDEN_ATTRIBUTE, MACOSX_RSRCLENGTH_ATTRIBUTE, #endif UNIX_INVALID_ATTRIBUTE /* lint - last enum value needs no trailing , */ }; MODULE_SCOPE const char *const tclpFileAttrStrings[]; const char *const tclpFileAttrStrings[] = { #if defined(__CYGWIN__) "-archive", #endif "-group", #if defined(__CYGWIN__) "-hidden", #endif "-owner", "-permissions", #if defined(HAVE_CHFLAGS) && defined(UF_IMMUTABLE) || defined(__CYGWIN__) "-readonly", #endif #if defined(__CYGWIN__) "-system", #endif #ifdef MAC_OSX_TCL "-creator", "-type", "-hidden", "-rsrclength", #endif NULL }; MODULE_SCOPE const TclFileAttrProcs tclpFileAttrProcs[]; const TclFileAttrProcs tclpFileAttrProcs[] = { #if defined(__CYGWIN__) {GetUnixFileAttributes, SetUnixFileAttributes}, #endif {GetGroupAttribute, SetGroupAttribute}, #if defined(__CYGWIN__) {GetUnixFileAttributes, SetUnixFileAttributes}, #endif {GetOwnerAttribute, SetOwnerAttribute}, {GetPermissionsAttribute, SetPermissionsAttribute}, #if defined(HAVE_CHFLAGS) && defined(UF_IMMUTABLE) || defined(__CYGWIN__) {GetUnixFileAttributes, SetUnixFileAttributes}, #endif #if defined(__CYGWIN__) {GetUnixFileAttributes, SetUnixFileAttributes}, #endif #ifdef MAC_OSX_TCL {TclMacOSXGetFileAttribute, TclMacOSXSetFileAttribute}, {TclMacOSXGetFileAttribute, TclMacOSXSetFileAttribute}, {TclMacOSXGetFileAttribute, TclMacOSXSetFileAttribute}, {TclMacOSXGetFileAttribute, TclMacOSXSetFileAttribute}, #endif }; #endif /* DJGPP */ /* * This is the maximum number of consecutive readdir/unlink calls that can be * made (with no intervening rewinddir or closedir/opendir) before triggering * a bug that makes readdir return NULL even though some directory entries * have not been processed. The bug afflicts SunOS's readdir when applied to * ufs file systems and Darwin 6.5's (and OSX v.10.3.8's) HFS+. JH found the * Darwin readdir to reset at 147, so 130 is chosen to be conservative. We * can't do a general rewind on failure as NFS can create special files that * recreate themselves when you try and delete them. 8.4.8 added a solution * that was affected by a single such NFS file, this solution should not be * affected by less than THRESHOLD such files. [Bug 1034337] */ #define MAX_READDIR_UNLINK_THRESHOLD 130 /* * Declarations for local procedures defined in this file: */ static int CopyFileAtts(const char *src, const char *dst, const Tcl_StatBuf *statBufPtr); static const char * DefaultTempDir(void); static int DoCopyFile(const char *srcPtr, const char *dstPtr, const Tcl_StatBuf *statBufPtr); static int DoCreateDirectory(const char *pathPtr); static int DoRemoveDirectory(Tcl_DString *pathPtr, int recursive, Tcl_DString *errorPtr); static int DoRenameFile(const char *src, const char *dst); static int TraversalCopy(Tcl_DString *srcPtr, Tcl_DString *dstPtr, const Tcl_StatBuf *statBufPtr, int type, Tcl_DString *errorPtr); static int TraversalDelete(Tcl_DString *srcPtr, Tcl_DString *dstPtr, const Tcl_StatBuf *statBufPtr, int type, Tcl_DString *errorPtr); static int TraverseUnixTree(TraversalProc *traversalProc, Tcl_DString *sourcePtr, Tcl_DString *destPtr, Tcl_DString *errorPtr, int doRewind); #ifdef PURIFY /* * realpath and purify don't mix happily. It has been noted that realpath * should not be used with purify because of bogus warnings, but just * memset'ing the resolved path will squelch those. This assumes we are * passing the standard MAXPATHLEN size resolved arg. */ static char * Realpath(const char *path, char *resolved); char * Realpath( const char *path, char *resolved) { memset(resolved, 0, MAXPATHLEN); return realpath(path, resolved); } #else # define Realpath realpath #endif /* PURIFY */ #ifndef NO_REALPATH #if defined(__APPLE__) && defined(TCL_THREADS) && \ defined(MAC_OS_X_VERSION_MIN_REQUIRED) && \ MAC_OS_X_VERSION_MIN_REQUIRED < 1030 /* * Prior to Darwin 7, realpath is not thread-safe, c.f. Bug 711232; if we * might potentially be running on pre-10.3 OSX, check Darwin release at * runtime before using realpath. */ MODULE_SCOPE long tclMacOSXDarwinRelease; # define haveRealpath (tclMacOSXDarwinRelease >= 7) #else # define haveRealpath 1 #endif #endif /* NO_REALPATH */ #ifdef HAVE_FTS #if defined(HAVE_STRUCT_STAT64) && !defined(__APPLE__) /* fts doesn't do stat64 */ # define noFtsStat 1 #elif defined(__APPLE__) && defined(__LP64__) && \ defined(MAC_OS_X_VERSION_MIN_REQUIRED) && \ MAC_OS_X_VERSION_MIN_REQUIRED < 1050 /* * Prior to Darwin 9, 64bit fts_open() without FTS_NOSTAT may crash (due to a * 64bit-unsafe ALIGN macro); if we could be running on pre-10.5 OSX, check * Darwin release at runtime and do a separate stat() if necessary. */ MODULE_SCOPE long tclMacOSXDarwinRelease; # define noFtsStat (tclMacOSXDarwinRelease < 9) #else # define noFtsStat 0 #endif #endif /* HAVE_FTS */ /* *--------------------------------------------------------------------------- * * TclpObjRenameFile, DoRenameFile -- * * Changes the name of an existing file or directory, from src to dst. If * src and dst refer to the same file or directory, does nothing and * returns success. Otherwise if dst already exists, it will be deleted * and replaced by src subject to the following conditions: * If src is a directory, dst may be an empty directory. * If src is a file, dst may be a file. * In any other situation where dst already exists, the rename will fail. * * Results: * If the directory was successfully created, returns TCL_OK. Otherwise * the return value is TCL_ERROR and errno is set to indicate the error. * Some possible values for errno are: * * EACCES: src or dst parent directory can't be read and/or written. * EEXIST: dst is a non-empty directory. * EINVAL: src is a root directory or dst is a subdirectory of src. * EISDIR: dst is a directory, but src is not. * ENOENT: src doesn't exist, or src or dst is "". * ENOTDIR: src is a directory, but dst is not. * EXDEV: src and dst are on different filesystems. * * Side effects: * The implementation of rename may allow cross-filesystem renames, but * the caller should be prepared to emulate it with copy and delete if * errno is EXDEV. * *--------------------------------------------------------------------------- */ int TclpObjRenameFile( Tcl_Obj *srcPathPtr, Tcl_Obj *destPathPtr) { return DoRenameFile(Tcl_FSGetNativePath(srcPathPtr), Tcl_FSGetNativePath(destPathPtr)); } static int DoRenameFile( const char *src, /* Pathname of file or dir to be renamed * (native). */ const char *dst) /* New pathname of file or directory * (native). */ { if (rename(src, dst) == 0) { /* INTL: Native. */ return TCL_OK; } if (errno == ENOTEMPTY) { errno = EEXIST; } /* * IRIX returns EIO when you attept to move a directory into itself. We * just map EIO to EINVAL get the right message on SGI. Most platforms * don't return EIO except in really strange cases. */ if (errno == EIO) { errno = EINVAL; } #ifndef NO_REALPATH /* * SunOS 4.1.4 reports overwriting a non-empty directory with a directory * as EINVAL instead of EEXIST (first rule out the correct EINVAL result * code for moving a directory into itself). Must be conditionally * compiled because realpath() not defined on all systems. */ if (errno == EINVAL && haveRealpath) { char srcPath[MAXPATHLEN], dstPath[MAXPATHLEN]; DIR *dirPtr; Tcl_DirEntry *dirEntPtr; if ((Realpath((char *) src, srcPath) != NULL) /* INTL: Native. */ && (Realpath((char *) dst, dstPath) != NULL) /* INTL: Native */ && (strncmp(srcPath, dstPath, strlen(srcPath)) != 0)) { dirPtr = opendir(dst); /* INTL: Native. */ if (dirPtr != NULL) { while (1) { dirEntPtr = TclOSreaddir(dirPtr); /* INTL: Native. */ if (dirEntPtr == NULL) { break; } if ((strcmp(dirEntPtr->d_name, ".") != 0) && (strcmp(dirEntPtr->d_name, "..") != 0)) { errno = EEXIST; closedir(dirPtr); return TCL_ERROR; } } closedir(dirPtr); } } errno = EINVAL; } #endif /* !NO_REALPATH */ if (strcmp(src, "/") == 0) { /* * Alpha reports renaming / as EBUSY and Linux reports it as EACCES, * instead of EINVAL. */ errno = EINVAL; } /* * DEC Alpha OSF1 V3.0 returns EACCES when attempting to move a file * across filesystems and the parent directory of that file is not * writable. Most other systems return EXDEV. Does nothing to correct this * behavior. */ return TCL_ERROR; } /* *--------------------------------------------------------------------------- * * TclpObjCopyFile, DoCopyFile -- * * Copy a single file (not a directory). If dst already exists and is not * a directory, it is removed. * * Results: * If the file was successfully copied, returns TCL_OK. Otherwise the * return value is TCL_ERROR and errno is set to indicate the error. Some * possible values for errno are: * * EACCES: src or dst parent directory can't be read and/or written. * EISDIR: src or dst is a directory. * ENOENT: src doesn't exist. src or dst is "". * * Side effects: * This procedure will also copy symbolic links, block, and character * devices, and fifos. For symbolic links, the links themselves will be * copied and not what they point to. For the other special file types, * the directory entry will be copied and not the contents of the device * that it refers to. * *--------------------------------------------------------------------------- */ int TclpObjCopyFile( Tcl_Obj *srcPathPtr, Tcl_Obj *destPathPtr) { const char *src = Tcl_FSGetNativePath(srcPathPtr); Tcl_StatBuf srcStatBuf; if (TclOSlstat(src, &srcStatBuf) != 0) { /* INTL: Native. */ return TCL_ERROR; } return DoCopyFile(src, Tcl_FSGetNativePath(destPathPtr), &srcStatBuf); } static int DoCopyFile( const char *src, /* Pathname of file to be copied (native). */ const char *dst, /* Pathname of file to copy to (native). */ const Tcl_StatBuf *statBufPtr) /* Used to determine filetype. */ { Tcl_StatBuf dstStatBuf; if (S_ISDIR(statBufPtr->st_mode)) { errno = EISDIR; return TCL_ERROR; } /* * Symlink, and some of the other calls will fail if the target exists, so * we remove it first. */ if (TclOSlstat(dst, &dstStatBuf) == 0) { /* INTL: Native. */ if (S_ISDIR(dstStatBuf.st_mode)) { errno = EISDIR; return TCL_ERROR; } } if (unlink(dst) != 0) { /* INTL: Native. */ if (errno != ENOENT) { return TCL_ERROR; } } switch ((int) (statBufPtr->st_mode & S_IFMT)) { #ifndef DJGPP case S_IFLNK: { char linkBuf[MAXPATHLEN+1]; int length; length = readlink(src, linkBuf, MAXPATHLEN); /* INTL: Native. */ if (length == -1) { return TCL_ERROR; } linkBuf[length] = '\0'; if (symlink(linkBuf, dst) < 0) { /* INTL: Native. */ return TCL_ERROR; } #ifdef MAC_OSX_TCL TclMacOSXCopyFileAttributes(src, dst, statBufPtr); #endif break; } #endif /* !DJGPP */ case S_IFBLK: case S_IFCHR: if (mknod(dst, statBufPtr->st_mode, /* INTL: Native. */ statBufPtr->st_rdev) < 0) { return TCL_ERROR; } return CopyFileAtts(src, dst, statBufPtr); case S_IFIFO: if (mkfifo(dst, statBufPtr->st_mode) < 0) { /* INTL: Native. */ return TCL_ERROR; } return CopyFileAtts(src, dst, statBufPtr); default: return TclUnixCopyFile(src, dst, statBufPtr, 0); } return TCL_OK; } /* *---------------------------------------------------------------------- * * TclUnixCopyFile - * * Helper function for TclpCopyFile. Copies one regular file, using * read() and write(). * * Results: * A standard Tcl result. * * Side effects: * A file is copied. Dst will be overwritten if it exists. * *---------------------------------------------------------------------- */ int TclUnixCopyFile( const char *src, /* Pathname of file to copy (native). */ const char *dst, /* Pathname of file to create/overwrite * (native). */ const Tcl_StatBuf *statBufPtr, /* Used to determine mode and blocksize. */ int dontCopyAtts) /* If flag set, don't copy attributes. */ { int srcFd, dstFd; unsigned blockSize; /* Optimal I/O blocksize for filesystem */ char *buffer; /* Data buffer for copy */ size_t nread; #ifdef DJGPP #define BINMODE |O_BINARY #else #define BINMODE #endif /* DJGPP */ #define DEFAULT_COPY_BLOCK_SIZE 4096 if ((srcFd = TclOSopen(src, O_RDONLY BINMODE, 0)) < 0) { /* INTL: Native */ return TCL_ERROR; } dstFd = TclOSopen(dst, O_CREAT|O_TRUNC|O_WRONLY BINMODE, /* INTL: Native */ statBufPtr->st_mode); if (dstFd < 0) { close(srcFd); return TCL_ERROR; } /* * Try to work out the best size of buffer to use for copying. If we * can't, it's no big deal as we can just use a (32-bit) page, since * that's likely to be fairly efficient anyway. */ #ifdef HAVE_STRUCT_STAT_ST_BLKSIZE blockSize = statBufPtr->st_blksize; #elif !defined(NO_FSTATFS) { struct statfs fs; if (fstatfs(srcFd, &fs) == 0) { blockSize = fs.f_bsize; } else { blockSize = DEFAULT_COPY_BLOCK_SIZE; } } #else blockSize = DEFAULT_COPY_BLOCK_SIZE; #endif /* HAVE_STRUCT_STAT_ST_BLKSIZE */ /* * [SF Tcl Bug 1586470] Even if we HAVE_STRUCT_STAT_ST_BLKSIZE, there are * filesystems which report a bogus value for the blocksize. An example * is the Andrew Filesystem (afs), reporting a blocksize of 0. When * detecting such a situation we now simply fall back to a hardwired * default size. */ if (blockSize <= 0) { blockSize = DEFAULT_COPY_BLOCK_SIZE; } buffer = ckalloc(blockSize); while (1) { nread = (size_t) read(srcFd, buffer, blockSize); if ((nread == (size_t) -1) || (nread == 0)) { break; } if ((size_t) write(dstFd, buffer, nread) != nread) { nread = (size_t) -1; break; } } ckfree(buffer); close(srcFd); if ((close(dstFd) != 0) || (nread == (size_t) -1)) { unlink(dst); /* INTL: Native. */ return TCL_ERROR; } if (!dontCopyAtts && CopyFileAtts(src, dst, statBufPtr) == TCL_ERROR) { /* * The copy succeeded, but setting the permissions failed, so be in a * consistent state, we remove the file that was created by the copy. */ unlink(dst); /* INTL: Native. */ return TCL_ERROR; } return TCL_OK; } /* *--------------------------------------------------------------------------- * * TclpObjDeleteFile, TclpDeleteFile -- * * Removes a single file (not a directory). * * Results: * If the file was successfully deleted, returns TCL_OK. Otherwise the * return value is TCL_ERROR and errno is set to indicate the error. Some * possible values for errno are: * * EACCES: a parent directory can't be read and/or written. * EISDIR: path is a directory. * ENOENT: path doesn't exist or is "". * * Side effects: * The file is deleted, even if it is read-only. * *--------------------------------------------------------------------------- */ int TclpObjDeleteFile( Tcl_Obj *pathPtr) { return TclpDeleteFile(Tcl_FSGetNativePath(pathPtr)); } int TclpDeleteFile( const void *path) /* Pathname of file to be removed (native). */ { if (unlink((const char *)path) != 0) { return TCL_ERROR; } return TCL_OK; } /* *--------------------------------------------------------------------------- * * TclpCreateDirectory, DoCreateDirectory -- * * Creates the specified directory. All parent directories of the * specified directory must already exist. The directory is automatically * created with permissions so that user can access the new directory and * create new files or subdirectories in it. * * Results: * If the directory was successfully created, returns TCL_OK. Otherwise * the return value is TCL_ERROR and errno is set to indicate the error. * Some possible values for errno are: * * EACCES: a parent directory can't be read and/or written. * EEXIST: path already exists. * ENOENT: a parent directory doesn't exist. * * Side effects: * A directory is created with the current umask, except that permission * for u+rwx will always be added. * *--------------------------------------------------------------------------- */ int TclpObjCreateDirectory( Tcl_Obj *pathPtr) { return DoCreateDirectory(Tcl_FSGetNativePath(pathPtr)); } static int DoCreateDirectory( const char *path) /* Pathname of directory to create (native). */ { mode_t mode; mode = umask(0); umask(mode); /* * umask return value is actually the inverse of the permissions. */ mode = (0777 & ~mode) | S_IRUSR | S_IWUSR | S_IXUSR; if (mkdir(path, mode) != 0) { /* INTL: Native. */ return TCL_ERROR; } return TCL_OK; } /* *--------------------------------------------------------------------------- * * TclpObjCopyDirectory -- * * Recursively copies a directory. The target directory dst must not * already exist. Note that this function does not merge two directory * hierarchies, even if the target directory is an an empty directory. * * Results: * If the directory was successfully copied, returns TCL_OK. Otherwise * the return value is TCL_ERROR, errno is set to indicate the error, and * the pathname of the file that caused the error is stored in errorPtr. * See TclpObjCreateDirectory and TclpObjCopyFile for a description of * possible values for errno. * * Side effects: * An exact copy of the directory hierarchy src will be created with the * name dst. If an error occurs, the error will be returned immediately, * and remaining files will not be processed. * *--------------------------------------------------------------------------- */ int TclpObjCopyDirectory( Tcl_Obj *srcPathPtr, Tcl_Obj *destPathPtr, Tcl_Obj **errorPtr) { Tcl_DString ds; Tcl_DString srcString, dstString; int ret; Tcl_Obj *transPtr; transPtr = Tcl_FSGetTranslatedPath(NULL,srcPathPtr); Tcl_UtfToExternalDString(NULL, (transPtr != NULL ? TclGetString(transPtr) : NULL), -1, &srcString); if (transPtr != NULL) { Tcl_DecrRefCount(transPtr); } transPtr = Tcl_FSGetTranslatedPath(NULL,destPathPtr); Tcl_UtfToExternalDString(NULL, (transPtr != NULL ? TclGetString(transPtr) : NULL), -1, &dstString); if (transPtr != NULL) { Tcl_DecrRefCount(transPtr); } ret = TraverseUnixTree(TraversalCopy, &srcString, &dstString, &ds, 0); Tcl_DStringFree(&srcString); Tcl_DStringFree(&dstString); if (ret != TCL_OK) { *errorPtr = Tcl_NewStringObj(Tcl_DStringValue(&ds), -1); Tcl_DStringFree(&ds); Tcl_IncrRefCount(*errorPtr); } return ret; } /* *--------------------------------------------------------------------------- * * TclpRemoveDirectory, DoRemoveDirectory -- * * Removes directory (and its contents, if the recursive flag is set). * * Results: * If the directory was successfully removed, returns TCL_OK. Otherwise * the return value is TCL_ERROR, errno is set to indicate the error, and * the pathname of the file that caused the error is stored in errorPtr. * Some possible values for errno are: * * EACCES: path directory can't be read and/or written. * EEXIST: path is a non-empty directory. * EINVAL: path is a root directory. * ENOENT: path doesn't exist or is "". * ENOTDIR: path is not a directory. * * Side effects: * Directory removed. If an error occurs, the error will be returned * immediately, and remaining files will not be deleted. * *--------------------------------------------------------------------------- */ int TclpObjRemoveDirectory( Tcl_Obj *pathPtr, int recursive, Tcl_Obj **errorPtr) { Tcl_DString ds; Tcl_DString pathString; int ret; Tcl_Obj *transPtr = Tcl_FSGetTranslatedPath(NULL, pathPtr); Tcl_UtfToExternalDString(NULL, (transPtr != NULL ? TclGetString(transPtr) : NULL), -1, &pathString); if (transPtr != NULL) { Tcl_DecrRefCount(transPtr); } ret = DoRemoveDirectory(&pathString, recursive, &ds); Tcl_DStringFree(&pathString); if (ret != TCL_OK) { *errorPtr = Tcl_NewStringObj(Tcl_DStringValue(&ds), -1); Tcl_DStringFree(&ds); Tcl_IncrRefCount(*errorPtr); } return ret; } static int DoRemoveDirectory( Tcl_DString *pathPtr, /* Pathname of directory to be removed * (native). */ int recursive, /* If non-zero, removes directories that are * nonempty. Otherwise, will only remove empty * directories. */ Tcl_DString *errorPtr) /* If non-NULL, uninitialized or free DString * filled with UTF-8 name of file causing * error. */ { const char *path; mode_t oldPerm = 0; int result; path = Tcl_DStringValue(pathPtr); if (recursive != 0) { /* * We should try to change permissions so this can be deleted. */ Tcl_StatBuf statBuf; int newPerm; if (TclOSstat(path, &statBuf) == 0) { oldPerm = (mode_t) (statBuf.st_mode & 0x00007FFF); } newPerm = oldPerm | (64+128+256); chmod(path, (mode_t) newPerm); } if (rmdir(path) == 0) { /* INTL: Native. */ return TCL_OK; } if (errno == ENOTEMPTY) { errno = EEXIST; } result = TCL_OK; if ((errno != EEXIST) || (recursive == 0)) { if (errorPtr != NULL) { Tcl_ExternalToUtfDString(NULL, path, -1, errorPtr); } result = TCL_ERROR; } /* * The directory is nonempty, but the recursive flag has been specified, * so we recursively remove all the files in the directory. */ if (result == TCL_OK) { result = TraverseUnixTree(TraversalDelete, pathPtr, NULL, errorPtr, 1); } if ((result != TCL_OK) && (recursive != 0)) { /* * Try to restore permissions. */ chmod(path, oldPerm); } return result; } /* *--------------------------------------------------------------------------- * * TraverseUnixTree -- * * Traverse directory tree specified by sourcePtr, calling the function * traverseProc for each file and directory encountered. If destPtr is * non-null, each of name in the sourcePtr directory is appended to the * directory specified by destPtr and passed as the second argument to * traverseProc(). * * Results: * Standard Tcl result. * * Side effects: * None caused by TraverseUnixTree, however the user specified * traverseProc() may change state. If an error occurs, the error will be * returned immediately, and remaining files will not be processed. * *--------------------------------------------------------------------------- */ static int TraverseUnixTree( TraversalProc *traverseProc,/* Function to call for every file and * directory in source hierarchy. */ Tcl_DString *sourcePtr, /* Pathname of source directory to be * traversed (native). */ Tcl_DString *targetPtr, /* Pathname of directory to traverse in * parallel with source directory (native). */ Tcl_DString *errorPtr, /* If non-NULL, uninitialized or free DString * filled with UTF-8 name of file causing * error. */ int doRewind) /* Flag indicating that to ensure complete * traversal of source hierarchy, the readdir * loop should be rewound whenever * traverseProc has returned TCL_OK; this is * required when traverseProc modifies the * source hierarchy, e.g. by deleting * files. */ { Tcl_StatBuf statBuf; const char *source, *errfile; int result, sourceLen; int targetLen; #ifndef HAVE_FTS int numProcessed = 0; Tcl_DirEntry *dirEntPtr; DIR *dirPtr; #else const char *paths[2] = {NULL, NULL}; FTS *fts = NULL; FTSENT *ent; #endif errfile = NULL; result = TCL_OK; targetLen = 0; /* lint. */ source = Tcl_DStringValue(sourcePtr); if (TclOSlstat(source, &statBuf) != 0) { /* INTL: Native. */ errfile = source; goto end; } if (!S_ISDIR(statBuf.st_mode)) { /* * Process the regular file */ return traverseProc(sourcePtr, targetPtr, &statBuf, DOTREE_F, errorPtr); } #ifndef HAVE_FTS dirPtr = opendir(source); /* INTL: Native. */ if (dirPtr == NULL) { /* * Can't read directory */ errfile = source; goto end; } result = traverseProc(sourcePtr, targetPtr, &statBuf, DOTREE_PRED, errorPtr); if (result != TCL_OK) { closedir(dirPtr); return result; } TclDStringAppendLiteral(sourcePtr, "/"); sourceLen = Tcl_DStringLength(sourcePtr); if (targetPtr != NULL) { TclDStringAppendLiteral(targetPtr, "/"); targetLen = Tcl_DStringLength(targetPtr); } while ((dirEntPtr = TclOSreaddir(dirPtr)) != NULL) { /* INTL: Native. */ if ((dirEntPtr->d_name[0] == '.') && ((dirEntPtr->d_name[1] == '\0') || (strcmp(dirEntPtr->d_name, "..") == 0))) { continue; } /* * Append name after slash, and recurse on the file. */ Tcl_DStringAppend(sourcePtr, dirEntPtr->d_name, -1); if (targetPtr != NULL) { Tcl_DStringAppend(targetPtr, dirEntPtr->d_name, -1); } result = TraverseUnixTree(traverseProc, sourcePtr, targetPtr, errorPtr, doRewind); if (result != TCL_OK) { break; } else { numProcessed++; } /* * Remove name after slash. */ Tcl_DStringSetLength(sourcePtr, sourceLen); if (targetPtr != NULL) { Tcl_DStringSetLength(targetPtr, targetLen); } if (doRewind && (numProcessed > MAX_READDIR_UNLINK_THRESHOLD)) { /* * Call rewinddir if we've called unlink or rmdir so many times * (since the opendir or the previous rewinddir), to avoid a * NULL-return that may a symptom of a buggy readdir. */ rewinddir(dirPtr); numProcessed = 0; } } closedir(dirPtr); /* * Strip off the trailing slash we added */ Tcl_DStringSetLength(sourcePtr, sourceLen - 1); if (targetPtr != NULL) { Tcl_DStringSetLength(targetPtr, targetLen - 1); } if (result == TCL_OK) { /* * Call traverseProc() on a directory after visiting all the files in * that directory. */ result = traverseProc(sourcePtr, targetPtr, &statBuf, DOTREE_POSTD, errorPtr); } #else /* HAVE_FTS */ paths[0] = source; fts = fts_open((char **) paths, FTS_PHYSICAL | FTS_NOCHDIR | (noFtsStat || doRewind ? FTS_NOSTAT : 0), NULL); if (fts == NULL) { errfile = source; goto end; } sourceLen = Tcl_DStringLength(sourcePtr); if (targetPtr != NULL) { targetLen = Tcl_DStringLength(targetPtr); } while ((ent = fts_read(fts)) != NULL) { unsigned short info = ent->fts_info; char *path = ent->fts_path + sourceLen; unsigned short pathlen = ent->fts_pathlen - sourceLen; int type; Tcl_StatBuf *statBufPtr = NULL; if (info == FTS_DNR || info == FTS_ERR || info == FTS_NS) { errfile = ent->fts_path; break; } Tcl_DStringAppend(sourcePtr, path, pathlen); if (targetPtr != NULL) { Tcl_DStringAppend(targetPtr, path, pathlen); } switch (info) { case FTS_D: type = DOTREE_PRED; break; case FTS_DP: type = DOTREE_POSTD; break; default: type = DOTREE_F; break; } if (!doRewind) { /* no need to stat for delete */ if (noFtsStat) { statBufPtr = &statBuf; if (TclOSlstat(ent->fts_path, statBufPtr) != 0) { errfile = ent->fts_path; break; } } else { statBufPtr = (Tcl_StatBuf *) ent->fts_statp; } } result = traverseProc(sourcePtr, targetPtr, statBufPtr, type, errorPtr); if (result != TCL_OK) { break; } Tcl_DStringSetLength(sourcePtr, sourceLen); if (targetPtr != NULL) { Tcl_DStringSetLength(targetPtr, targetLen); } } #endif /* !HAVE_FTS */ end: if (errfile != NULL) { if (errorPtr != NULL) { Tcl_ExternalToUtfDString(NULL, errfile, -1, errorPtr); } result = TCL_ERROR; } #ifdef HAVE_FTS if (fts != NULL) { fts_close(fts); } #endif return result; } /* *---------------------------------------------------------------------- * * TraversalCopy * * Called from TraverseUnixTree in order to execute a recursive copy of a * directory. * * Results: * Standard Tcl result. * * Side effects: * The file or directory src may be copied to dst, depending on the value * of type. * *---------------------------------------------------------------------- */ static int TraversalCopy( Tcl_DString *srcPtr, /* Source pathname to copy (native). */ Tcl_DString *dstPtr, /* Destination pathname of copy (native). */ const Tcl_StatBuf *statBufPtr, /* Stat info for file specified by srcPtr. */ int type, /* Reason for call - see TraverseUnixTree(). */ Tcl_DString *errorPtr) /* If non-NULL, uninitialized or free DString * filled with UTF-8 name of file causing * error. */ { switch (type) { case DOTREE_F: if (DoCopyFile(Tcl_DStringValue(srcPtr), Tcl_DStringValue(dstPtr), statBufPtr) == TCL_OK) { return TCL_OK; } break; case DOTREE_PRED: if (DoCreateDirectory(Tcl_DStringValue(dstPtr)) == TCL_OK) { return TCL_OK; } break; case DOTREE_POSTD: if (CopyFileAtts(Tcl_DStringValue(srcPtr), Tcl_DStringValue(dstPtr), statBufPtr) == TCL_OK) { return TCL_OK; } break; } /* * There shouldn't be a problem with src, because we already checked it to * get here. */ if (errorPtr != NULL) { Tcl_ExternalToUtfDString(NULL, Tcl_DStringValue(dstPtr), Tcl_DStringLength(dstPtr), errorPtr); } return TCL_ERROR; } /* *--------------------------------------------------------------------------- * * TraversalDelete -- * * Called by procedure TraverseUnixTree for every file and directory that * it encounters in a directory hierarchy. This procedure unlinks files, * and removes directories after all the containing files have been * processed. * * Results: * Standard Tcl result. * * Side effects: * Files or directory specified by src will be deleted. * *---------------------------------------------------------------------- */ static int TraversalDelete( Tcl_DString *srcPtr, /* Source pathname (native). */ Tcl_DString *ignore, /* Destination pathname (not used). */ const Tcl_StatBuf *statBufPtr, /* Stat info for file specified by srcPtr. */ int type, /* Reason for call - see TraverseUnixTree(). */ Tcl_DString *errorPtr) /* If non-NULL, uninitialized or free DString * filled with UTF-8 name of file causing * error. */ { switch (type) { case DOTREE_F: if (TclpDeleteFile(Tcl_DStringValue(srcPtr)) == 0) { return TCL_OK; } break; case DOTREE_PRED: return TCL_OK; case DOTREE_POSTD: if (DoRemoveDirectory(srcPtr, 0, NULL) == 0) { return TCL_OK; } break; } if (errorPtr != NULL) { Tcl_ExternalToUtfDString(NULL, Tcl_DStringValue(srcPtr), Tcl_DStringLength(srcPtr), errorPtr); } return TCL_ERROR; } /* *--------------------------------------------------------------------------- * * CopyFileAtts -- * * Copy the file attributes such as owner, group, permissions, and * modification date from one file to another. * * Results: * Standard Tcl result. * * Side effects: * User id, group id, permission bits, last modification time, and last * access time are updated in the new file to reflect the old file. * *--------------------------------------------------------------------------- */ static int CopyFileAtts( const char *src, /* Path name of source file (native). */ const char *dst, /* Path name of target file (native). */ const Tcl_StatBuf *statBufPtr) /* Stat info for source file */ { struct utimbuf tval; mode_t newMode; newMode = statBufPtr->st_mode & (S_ISUID | S_ISGID | S_IRWXU | S_IRWXG | S_IRWXO); /* * Note that if you copy a setuid file that is owned by someone else, and * you are not root, then the copy will be setuid to you. The most correct * implementation would probably be to have the copy not setuid to anyone * if the original file was owned by someone else, but this corner case * isn't currently handled. It would require another lstat(), or getuid(). */ if (chmod(dst, newMode)) { /* INTL: Native. */ newMode &= ~(S_ISUID | S_ISGID); if (chmod(dst, newMode)) { /* INTL: Native. */ return TCL_ERROR; } } tval.actime = statBufPtr->st_atime; tval.modtime = statBufPtr->st_mtime; if (utime(dst, &tval)) { /* INTL: Native. */ return TCL_ERROR; } #ifdef MAC_OSX_TCL TclMacOSXCopyFileAttributes(src, dst, statBufPtr); #endif return TCL_OK; } /* *---------------------------------------------------------------------- * * GetGroupAttribute * * Gets the group attribute of a file. * * Results: * Standard TCL result. Returns a new Tcl_Obj in attributePtrPtr if there * is no error. * * Side effects: * A new object is allocated. * *---------------------------------------------------------------------- */ static int GetGroupAttribute( Tcl_Interp *interp, /* The interp we are using for errors. */ int objIndex, /* The index of the attribute. */ Tcl_Obj *fileName, /* The name of the file (UTF-8). */ Tcl_Obj **attributePtrPtr) /* A pointer to return the object with. */ { Tcl_StatBuf statBuf; struct group *groupPtr; int result; result = TclpObjStat(fileName, &statBuf); if (result != 0) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "could not read \"%s\": %s", TclGetString(fileName), Tcl_PosixError(interp))); } return TCL_ERROR; } groupPtr = TclpGetGrGid(statBuf.st_gid); if (groupPtr == NULL) { *attributePtrPtr = Tcl_NewLongObj((long) statBuf.st_gid); } else { Tcl_DString ds; const char *utf; utf = Tcl_ExternalToUtfDString(NULL, groupPtr->gr_name, -1, &ds); *attributePtrPtr = Tcl_NewStringObj(utf, -1); Tcl_DStringFree(&ds); } return TCL_OK; } /* *---------------------------------------------------------------------- * * GetOwnerAttribute * * Gets the owner attribute of a file. * * Results: * Standard TCL result. Returns a new Tcl_Obj in attributePtrPtr if there * is no error. * * Side effects: * A new object is allocated. * *---------------------------------------------------------------------- */ static int GetOwnerAttribute( Tcl_Interp *interp, /* The interp we are using for errors. */ int objIndex, /* The index of the attribute. */ Tcl_Obj *fileName, /* The name of the file (UTF-8). */ Tcl_Obj **attributePtrPtr) /* A pointer to return the object with. */ { Tcl_StatBuf statBuf; struct passwd *pwPtr; int result; result = TclpObjStat(fileName, &statBuf); if (result != 0) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "could not read \"%s\": %s", TclGetString(fileName), Tcl_PosixError(interp))); } return TCL_ERROR; } pwPtr = TclpGetPwUid(statBuf.st_uid); if (pwPtr == NULL) { *attributePtrPtr = Tcl_NewLongObj((long) statBuf.st_uid); } else { Tcl_DString ds; (void) Tcl_ExternalToUtfDString(NULL, pwPtr->pw_name, -1, &ds); *attributePtrPtr = TclDStringToObj(&ds); } return TCL_OK; } /* *---------------------------------------------------------------------- * * GetPermissionsAttribute * * Gets the group attribute of a file. * * Results: * Standard TCL result. Returns a new Tcl_Obj in attributePtrPtr if there * is no error. The object will have ref count 0. * * Side effects: * A new object is allocated. * *---------------------------------------------------------------------- */ static int GetPermissionsAttribute( Tcl_Interp *interp, /* The interp we are using for errors. */ int objIndex, /* The index of the attribute. */ Tcl_Obj *fileName, /* The name of the file (UTF-8). */ Tcl_Obj **attributePtrPtr) /* A pointer to return the object with. */ { Tcl_StatBuf statBuf; int result; result = TclpObjStat(fileName, &statBuf); if (result != 0) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "could not read \"%s\": %s", TclGetString(fileName), Tcl_PosixError(interp))); } return TCL_ERROR; } *attributePtrPtr = Tcl_ObjPrintf( "%0#5lo", (long) (statBuf.st_mode & 0x00007FFF)); return TCL_OK; } /* *--------------------------------------------------------------------------- * * SetGroupAttribute -- * * Sets the group of the file to the specified group. * * Results: * Standard TCL result. * * Side effects: * As above. * *--------------------------------------------------------------------------- */ static int SetGroupAttribute( Tcl_Interp *interp, /* The interp for error reporting. */ int objIndex, /* The index of the attribute. */ Tcl_Obj *fileName, /* The name of the file (UTF-8). */ Tcl_Obj *attributePtr) /* New group for file. */ { long gid; int result; const char *native; if (Tcl_GetLongFromObj(NULL, attributePtr, &gid) != TCL_OK) { Tcl_DString ds; struct group *groupPtr = NULL; const char *string; int length; string = TclGetStringFromObj(attributePtr, &length); native = Tcl_UtfToExternalDString(NULL, string, length, &ds); groupPtr = TclpGetGrNam(native); /* INTL: Native. */ Tcl_DStringFree(&ds); if (groupPtr == NULL) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "could not set group for file \"%s\":" " group \"%s\" does not exist", TclGetString(fileName), string)); Tcl_SetErrorCode(interp, "TCL", "OPERATION", "SETGRP", "NO_GROUP", NULL); } return TCL_ERROR; } gid = groupPtr->gr_gid; } native = Tcl_FSGetNativePath(fileName); result = chown(native, (uid_t) -1, (gid_t) gid); /* INTL: Native. */ if (result != 0) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "could not set group for file \"%s\": %s", TclGetString(fileName), Tcl_PosixError(interp))); } return TCL_ERROR; } return TCL_OK; } /* *--------------------------------------------------------------------------- * * SetOwnerAttribute -- * * Sets the owner of the file to the specified owner. * * Results: * Standard TCL result. * * Side effects: * As above. * *--------------------------------------------------------------------------- */ static int SetOwnerAttribute( Tcl_Interp *interp, /* The interp for error reporting. */ int objIndex, /* The index of the attribute. */ Tcl_Obj *fileName, /* The name of the file (UTF-8). */ Tcl_Obj *attributePtr) /* New owner for file. */ { long uid; int result; const char *native; if (Tcl_GetLongFromObj(NULL, attributePtr, &uid) != TCL_OK) { Tcl_DString ds; struct passwd *pwPtr = NULL; const char *string; int length; string = TclGetStringFromObj(attributePtr, &length); native = Tcl_UtfToExternalDString(NULL, string, length, &ds); pwPtr = TclpGetPwNam(native); /* INTL: Native. */ Tcl_DStringFree(&ds); if (pwPtr == NULL) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "could not set owner for file \"%s\":" " user \"%s\" does not exist", TclGetString(fileName), string)); Tcl_SetErrorCode(interp, "TCL", "OPERATION", "SETOWN", "NO_USER", NULL); } return TCL_ERROR; } uid = pwPtr->pw_uid; } native = Tcl_FSGetNativePath(fileName); result = chown(native, (uid_t) uid, (gid_t) -1); /* INTL: Native. */ if (result != 0) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "could not set owner for file \"%s\": %s", TclGetString(fileName), Tcl_PosixError(interp))); } return TCL_ERROR; } return TCL_OK; } /* *--------------------------------------------------------------------------- * * SetPermissionsAttribute * * Sets the file to the given permission. * * Results: * Standard TCL result. * * Side effects: * The permission of the file is changed. * *--------------------------------------------------------------------------- */ static int SetPermissionsAttribute( Tcl_Interp *interp, /* The interp we are using for errors. */ int objIndex, /* The index of the attribute. */ Tcl_Obj *fileName, /* The name of the file (UTF-8). */ Tcl_Obj *attributePtr) /* The attribute to set. */ { long mode; mode_t newMode; int result = TCL_ERROR; const char *native; const char *modeStringPtr = TclGetString(attributePtr); int scanned = TclParseAllWhiteSpace(modeStringPtr, -1); /* * First supply support for octal number format */ if ((modeStringPtr[scanned] == '0') && (modeStringPtr[scanned+1] >= '0') && (modeStringPtr[scanned+1] <= '7')) { /* Leading zero - attempt octal interpretation */ Tcl_Obj *modeObj; TclNewLiteralStringObj(modeObj, "0o"); Tcl_AppendToObj(modeObj, modeStringPtr+scanned+1, -1); result = Tcl_GetLongFromObj(NULL, modeObj, &mode); Tcl_DecrRefCount(modeObj); } if (result == TCL_OK || Tcl_GetLongFromObj(NULL, attributePtr, &mode) == TCL_OK) { newMode = (mode_t) (mode & 0x00007FFF); } else { Tcl_StatBuf buf; /* * Try the forms "rwxrwxrwx" and "ugo=rwx" * * We get the current mode of the file, in order to allow for ug+-=rwx * style chmod strings. */ result = TclpObjStat(fileName, &buf); if (result != 0) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "could not read \"%s\": %s", TclGetString(fileName), Tcl_PosixError(interp))); } return TCL_ERROR; } newMode = (mode_t) (buf.st_mode & 0x00007FFF); if (GetModeFromPermString(NULL, modeStringPtr, &newMode) != TCL_OK) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "unknown permission string format \"%s\"", modeStringPtr)); Tcl_SetErrorCode(interp, "TCL", "VALUE", "PERMISSION", NULL); } return TCL_ERROR; } } native = Tcl_FSGetNativePath(fileName); result = chmod(native, newMode); /* INTL: Native. */ if (result != 0) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "could not set permissions for file \"%s\": %s", TclGetString(fileName), Tcl_PosixError(interp))); } return TCL_ERROR; } return TCL_OK; } #ifndef DJGPP /* *--------------------------------------------------------------------------- * * TclpObjListVolumes -- * * Lists the currently mounted volumes, which on UNIX is just /. * * Results: * The list of volumes. * * Side effects: * None. * *--------------------------------------------------------------------------- */ Tcl_Obj * TclpObjListVolumes(void) { Tcl_Obj *resultPtr; TclNewLiteralStringObj(resultPtr, "/"); Tcl_IncrRefCount(resultPtr); return resultPtr; } #endif /* *---------------------------------------------------------------------- * * GetModeFromPermString -- * * This procedure is invoked to process the "file permissions" Tcl * command, to check for a "rwxrwxrwx" or "ugoa+-=rwxst" string. See the * user documentation for details on what it does. * * Results: * A standard Tcl result. * * Side effects: * See the user documentation. * *---------------------------------------------------------------------- */ static int GetModeFromPermString( Tcl_Interp *interp, /* The interp we are using for errors. */ const char *modeStringPtr, /* Permissions string */ mode_t *modePtr) /* pointer to the mode value */ { mode_t newMode; mode_t oldMode; /* Storage for the value of the old mode (that * is passed in), to allow for the chmod style * manipulation. */ int i,n, who, op, what, op_found, who_found; /* * We start off checking for an "rwxrwxrwx" style permissions string */ if (strlen(modeStringPtr) != 9) { goto chmodStyleCheck; } newMode = 0; for (i = 0; i < 9; i++) { switch (*(modeStringPtr+i)) { case 'r': if ((i%3) != 0) { goto chmodStyleCheck; } newMode |= (1<<(8-i)); break; case 'w': if ((i%3) != 1) { goto chmodStyleCheck; } newMode |= (1<<(8-i)); break; case 'x': if ((i%3) != 2) { goto chmodStyleCheck; } newMode |= (1<<(8-i)); break; case 's': if (((i%3) != 2) || (i > 5)) { goto chmodStyleCheck; } newMode |= (1<<(8-i)); newMode |= (1<<(11-(i/3))); break; case 'S': if (((i%3) != 2) || (i > 5)) { goto chmodStyleCheck; } newMode |= (1<<(11-(i/3))); break; case 't': if (i != 8) { goto chmodStyleCheck; } newMode |= (1<<(8-i)); newMode |= (1<<9); break; case 'T': if (i != 8) { goto chmodStyleCheck; } newMode |= (1<<9); break; case '-': break; default: /* * Oops, not what we thought it was, so go on */ goto chmodStyleCheck; } } *modePtr = newMode; return TCL_OK; chmodStyleCheck: /* * We now check for an "ugoa+-=rwxst" style permissions string */ for (n = 0 ; *(modeStringPtr+n) != '\0' ; n = n + i) { oldMode = *modePtr; who = op = what = op_found = who_found = 0; for (i = 0 ; *(modeStringPtr+n+i) != '\0' ; i++ ) { if (!who_found) { /* who */ switch (*(modeStringPtr+n+i)) { case 'u': who |= 0x9c0; continue; case 'g': who |= 0x438; continue; case 'o': who |= 0x207; continue; case 'a': who |= 0xfff; continue; } } who_found = 1; if (who == 0) { who = 0xfff; } if (!op_found) { /* op */ switch (*(modeStringPtr+n+i)) { case '+': op = 1; op_found = 1; continue; case '-': op = 2; op_found = 1; continue; case '=': op = 3; op_found = 1; continue; default: return TCL_ERROR; } } /* what */ switch (*(modeStringPtr+n+i)) { case 'r': what |= 0x124; continue; case 'w': what |= 0x92; continue; case 'x': what |= 0x49; continue; case 's': what |= 0xc00; continue; case 't': what |= 0x200; continue; case ',': break; default: return TCL_ERROR; } if (*(modeStringPtr+n+i) == ',') { i++; break; } } switch (op) { case 1: *modePtr = oldMode | (who & what); continue; case 2: *modePtr = oldMode & ~(who & what); continue; case 3: *modePtr = (oldMode & ~who) | (who & what); continue; } } return TCL_OK; } /* *--------------------------------------------------------------------------- * * TclpObjNormalizePath -- * * This function scans through a path specification and replaces it, in * place, with a normalized version. A normalized version is one in which * all symlinks in the path are replaced with their expanded form (except * a symlink at the very end of the path). * * Results: * The new 'nextCheckpoint' value, giving as far as we could understand * in the path. * * Side effects: * The pathPtr string, is modified. * *--------------------------------------------------------------------------- */ int TclpObjNormalizePath( Tcl_Interp *interp, Tcl_Obj *pathPtr, int nextCheckpoint) { const char *currentPathEndPosition; int pathLen; char cur; const char *path = TclGetStringFromObj(pathPtr, &pathLen); Tcl_DString ds; const char *nativePath; #ifndef NO_REALPATH char normPath[MAXPATHLEN]; #endif /* * We add '1' here because if nextCheckpoint is zero we know that '/' * exists, and if it isn't zero, it must point at a directory separator * which we also know exists. */ currentPathEndPosition = path + nextCheckpoint; if (*currentPathEndPosition == '/') { currentPathEndPosition++; } #ifndef NO_REALPATH /* * For speed, try to get the entire path in one go. */ if (nextCheckpoint == 0 && haveRealpath) { char *lastDir = strrchr(currentPathEndPosition, '/'); if (lastDir != NULL) { nativePath = Tcl_UtfToExternalDString(NULL, path, lastDir-path, &ds); if (Realpath(nativePath, normPath) != NULL) { if (*nativePath != '/' && *normPath == '/') { /* * realpath has transformed a relative path into an * absolute path, we do not know how to handle this. */ } else { nextCheckpoint = lastDir - path; goto wholeStringOk; } } Tcl_DStringFree(&ds); } } /* * Else do it the slow way. */ #endif while (1) { cur = *currentPathEndPosition; if ((cur == '/') && (path != currentPathEndPosition)) { /* * Reached directory separator. */ int accessOk; nativePath = Tcl_UtfToExternalDString(NULL, path, currentPathEndPosition - path, &ds); accessOk = access(nativePath, F_OK); Tcl_DStringFree(&ds); if (accessOk != 0) { /* * File doesn't exist. */ break; } /* * Update the acceptable point. */ nextCheckpoint = currentPathEndPosition - path; } else if (cur == 0) { /* * Reached end of string. */ break; } currentPathEndPosition++; } /* * We should really now convert this to a canonical path. We do that with * 'realpath' if we have it available. Otherwise we could step through * every single path component, checking whether it is a symlink, but that * would be a lot of work, and most modern OSes have 'realpath'. */ #ifndef NO_REALPATH if (haveRealpath) { /* * If we only had '/foo' or '/' then we never increment nextCheckpoint * and we don't need or want to go through 'Realpath'. Also, on some * platforms, passing an empty string to 'Realpath' will give us the * normalized pwd, which is not what we want at all! */ if (nextCheckpoint == 0) { return 0; } nativePath = Tcl_UtfToExternalDString(NULL, path,nextCheckpoint, &ds); if (Realpath(nativePath, normPath) != NULL) { int newNormLen; wholeStringOk: newNormLen = strlen(normPath); if ((newNormLen == Tcl_DStringLength(&ds)) && (strcmp(normPath, nativePath) == 0)) { /* * String is unchanged. */ Tcl_DStringFree(&ds); /* * Enable this to have the native FS claim normalization of * the whole path for existing files. That would permit the * caller to declare normalization complete without calls to * additional filesystems. Saving lots of calls is probably * worth the extra access() time here. When no other FS's are * registered though, things are less clear. * if (0 == access(normPath, F_OK)) { return pathLen; } */ return nextCheckpoint; } /* * Free up the native path and put in its place the converted, * normalized path. */ Tcl_DStringFree(&ds); Tcl_ExternalToUtfDString(NULL, normPath, (int) newNormLen, &ds); if (path[nextCheckpoint] != '\0') { /* * Not at end, append remaining path. */ int normLen = Tcl_DStringLength(&ds); Tcl_DStringAppend(&ds, path + nextCheckpoint, pathLen - nextCheckpoint); /* * We recognise up to and including the directory separator. */ nextCheckpoint = normLen + 1; } else { /* * We recognise the whole string. */ nextCheckpoint = Tcl_DStringLength(&ds); } /* * Overwrite with the normalized path. */ Tcl_SetStringObj(pathPtr, Tcl_DStringValue(&ds), Tcl_DStringLength(&ds)); } Tcl_DStringFree(&ds); } #endif /* !NO_REALPATH */ return nextCheckpoint; } /* *---------------------------------------------------------------------- * * TclpOpenTemporaryFile, TclUnixOpenTemporaryFile -- * * Creates a temporary file, possibly based on the supplied bits and * pieces of template supplied in the first three arguments. If the * fourth argument is non-NULL, it contains a Tcl_Obj to store the name * of the temporary file in (and it is caller's responsibility to clean * up). If the fourth argument is NULL, try to arrange for the temporary * file to go away once it is no longer needed. * * Results: * A read-write Tcl Channel open on the file for TclpOpenTemporaryFile, * or a file descriptor (or -1 on failure) for TclUnixOpenTemporaryFile. * * Side effects: * Accesses the filesystem. Will set the contents of the Tcl_Obj fourth * argument (if that is non-NULL). * *---------------------------------------------------------------------- */ Tcl_Channel TclpOpenTemporaryFile( Tcl_Obj *dirObj, Tcl_Obj *basenameObj, Tcl_Obj *extensionObj, Tcl_Obj *resultingNameObj) { int fd = TclUnixOpenTemporaryFile(dirObj, basenameObj, extensionObj, resultingNameObj); if (fd == -1) { return NULL; } return Tcl_MakeFileChannel(INT2PTR(fd), TCL_READABLE|TCL_WRITABLE); } int TclUnixOpenTemporaryFile( Tcl_Obj *dirObj, Tcl_Obj *basenameObj, Tcl_Obj *extensionObj, Tcl_Obj *resultingNameObj) { Tcl_DString template, tmp; const char *string; int len, fd; /* * We should also check against making more then TMP_MAX of these. */ if (dirObj) { string = TclGetStringFromObj(dirObj, &len); Tcl_UtfToExternalDString(NULL, string, len, &template); } else { Tcl_DStringInit(&template); Tcl_DStringAppend(&template, DefaultTempDir(), -1); /* INTL: native */ } TclDStringAppendLiteral(&template, "/"); if (basenameObj) { string = TclGetStringFromObj(basenameObj, &len); Tcl_UtfToExternalDString(NULL, string, len, &tmp); TclDStringAppendDString(&template, &tmp); Tcl_DStringFree(&tmp); } else { TclDStringAppendLiteral(&template, "tcl"); } TclDStringAppendLiteral(&template, "_XXXXXX"); #ifdef HAVE_MKSTEMPS if (extensionObj) { string = TclGetStringFromObj(extensionObj, &len); Tcl_UtfToExternalDString(NULL, string, len, &tmp); TclDStringAppendDString(&template, &tmp); fd = mkstemps(Tcl_DStringValue(&template), Tcl_DStringLength(&tmp)); Tcl_DStringFree(&tmp); } else #endif { fd = mkstemp(Tcl_DStringValue(&template)); } if (fd == -1) { Tcl_DStringFree(&template); return -1; } if (resultingNameObj) { Tcl_ExternalToUtfDString(NULL, Tcl_DStringValue(&template), Tcl_DStringLength(&template), &tmp); Tcl_SetStringObj(resultingNameObj, Tcl_DStringValue(&tmp), Tcl_DStringLength(&tmp)); Tcl_DStringFree(&tmp); } else { /* * Try to delete the file immediately since we're not reporting the * name to anyone. Note that we're *not* handling any errors from * this! */ unlink(Tcl_DStringValue(&template)); errno = 0; } Tcl_DStringFree(&template); return fd; } /* * Helper that does *part* of what tempnam() does. */ static const char * DefaultTempDir(void) { const char *dir; struct stat buf; dir = getenv("TMPDIR"); if (dir && dir[0] && stat(dir, &buf) == 0 && S_ISDIR(buf.st_mode) && access(dir, W_OK) == 0) { return dir; } #ifdef P_tmpdir dir = P_tmpdir; if (stat(dir, &buf)==0 && S_ISDIR(buf.st_mode) && access(dir, W_OK)==0) { return dir; } #endif /* * Assume that the default location ("/tmp" if not overridden) is always * an existing writable directory; we've no recovery mechanism if it * isn't. */ return TCL_TEMPORARY_FILE_DIRECTORY; } #if defined(__CYGWIN__) static void StatError( Tcl_Interp *interp, /* The interp that has the error */ Tcl_Obj *fileName) /* The name of the file which caused the * error. */ { TclWinConvertError(GetLastError()); Tcl_SetObjResult(interp, Tcl_ObjPrintf("could not read \"%s\": %s", TclGetString(fileName), Tcl_PosixError(interp))); } static WCHAR * winPathFromObj( Tcl_Obj *fileName) { int size; const char *native = Tcl_FSGetNativePath(fileName); WCHAR *winPath; size = cygwin_conv_path(1, native, NULL, 0); winPath = ckalloc(size); cygwin_conv_path(1, native, winPath, size); return winPath; } static const int attributeArray[] = { 0x20, 0, 2, 0, 0, 1, 4}; /* *---------------------------------------------------------------------- * * GetUnixFileAttributes * * Gets the readonly attribute of a file. * * Results: * Standard TCL result. Returns a new Tcl_Obj in attributePtrPtr if there * is no error. The object will have ref count 0. * * Side effects: * A new object is allocated. * *---------------------------------------------------------------------- */ static int GetUnixFileAttributes( Tcl_Interp *interp, /* The interp we are using for errors. */ int objIndex, /* The index of the attribute. */ Tcl_Obj *fileName, /* The name of the file (UTF-8). */ Tcl_Obj **attributePtrPtr) /* A pointer to return the object with. */ { int fileAttributes; WCHAR *winPath = winPathFromObj(fileName); fileAttributes = GetFileAttributesW(winPath); ckfree(winPath); if (fileAttributes == -1) { StatError(interp, fileName); return TCL_ERROR; } *attributePtrPtr = Tcl_NewIntObj((fileAttributes&attributeArray[objIndex])!=0); return TCL_OK; } /* *--------------------------------------------------------------------------- * * SetUnixFileAttributes * * Sets the readonly attribute of a file. * * Results: * Standard TCL result. * * Side effects: * The readonly attribute of the file is changed. * *--------------------------------------------------------------------------- */ static int SetUnixFileAttributes( Tcl_Interp *interp, /* The interp we are using for errors. */ int objIndex, /* The index of the attribute. */ Tcl_Obj *fileName, /* The name of the file (UTF-8). */ Tcl_Obj *attributePtr) /* The attribute to set. */ { int yesNo, fileAttributes, old; WCHAR *winPath; if (Tcl_GetBooleanFromObj(interp, attributePtr, &yesNo) != TCL_OK) { return TCL_ERROR; } winPath = winPathFromObj(fileName); fileAttributes = old = GetFileAttributesW(winPath); if (fileAttributes == -1) { ckfree(winPath); StatError(interp, fileName); return TCL_ERROR; } if (yesNo) { fileAttributes |= attributeArray[objIndex]; } else { fileAttributes &= ~attributeArray[objIndex]; } if ((fileAttributes != old) && !SetFileAttributesW(winPath, fileAttributes)) { ckfree(winPath); StatError(interp, fileName); return TCL_ERROR; } ckfree(winPath); return TCL_OK; } #elif defined(HAVE_CHFLAGS) && defined(UF_IMMUTABLE) /* *---------------------------------------------------------------------- * * GetUnixFileAttributes * * Gets the readonly attribute (user immutable flag) of a file. * * Results: * Standard TCL result. Returns a new Tcl_Obj in attributePtrPtr if there * is no error. The object will have ref count 0. * * Side effects: * A new object is allocated. * *---------------------------------------------------------------------- */ static int GetUnixFileAttributes( Tcl_Interp *interp, /* The interp we are using for errors. */ int objIndex, /* The index of the attribute. */ Tcl_Obj *fileName, /* The name of the file (UTF-8). */ Tcl_Obj **attributePtrPtr) /* A pointer to return the object with. */ { Tcl_StatBuf statBuf; int result; result = TclpObjStat(fileName, &statBuf); if (result != 0) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "could not read \"%s\": %s", TclGetString(fileName), Tcl_PosixError(interp))); } return TCL_ERROR; } *attributePtrPtr = Tcl_NewLongObj((statBuf.st_flags&UF_IMMUTABLE)!=0); return TCL_OK; } /* *--------------------------------------------------------------------------- * * SetUnixFileAttributes * * Sets the readonly attribute (user immutable flag) of a file. * * Results: * Standard TCL result. * * Side effects: * The readonly attribute of the file is changed. * *--------------------------------------------------------------------------- */ static int SetUnixFileAttributes( Tcl_Interp *interp, /* The interp we are using for errors. */ int objIndex, /* The index of the attribute. */ Tcl_Obj *fileName, /* The name of the file (UTF-8). */ Tcl_Obj *attributePtr) /* The attribute to set. */ { Tcl_StatBuf statBuf; int result, readonly; const char *native; if (Tcl_GetBooleanFromObj(interp, attributePtr, &readonly) != TCL_OK) { return TCL_ERROR; } result = TclpObjStat(fileName, &statBuf); if (result != 0) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "could not read \"%s\": %s", TclGetString(fileName), Tcl_PosixError(interp))); } return TCL_ERROR; } if (readonly) { statBuf.st_flags |= UF_IMMUTABLE; } else { statBuf.st_flags &= ~UF_IMMUTABLE; } native = Tcl_FSGetNativePath(fileName); result = chflags(native, statBuf.st_flags); /* INTL: Native. */ if (result != 0) { if (interp != NULL) { Tcl_SetObjResult(interp, Tcl_ObjPrintf( "could not set flags for file \"%s\": %s", TclGetString(fileName), Tcl_PosixError(interp))); } return TCL_ERROR; } return TCL_OK; } #endif /* defined(HAVE_CHFLAGS) && defined(UF_IMMUTABLE) */ /* * Local Variables: * mode: c * c-basic-offset: 4 * fill-column: 78 * End: */