#
# Makefile for Borland C++ 5.5 (or C++ Builder 5), adapted from the makefile
#   for Visual C++ that came with tcl 8.3.3
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# Copyright (c) 1995-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-1999 by Scriptics Corporation.

# TIP #59 information.
#
# This makefile does not set the following configuration cpp
# defines. Behind the defines are the makefile variables listed to set
# to -D... when that feature is enabled.
#
# - TCL_CFG_PROFILED		PROFDEFINES
# - TCL_CFG_OPTIMIZED		OPTDEFINES
# - TCL_CFG_DO64BIT		SIXFOURDEFINES

# Have a look at the complete description on how to build and test Tcl with
# the current Borland compilers at www.ratiosoft.com/tcl/borland.
#
# Usage:
#   - Adapt the paths below to match your compiler's location
#   - Make sure the compiler's bin directory is on your path
#   - Open a console
#   - To make a debug version enter
#       make -fmakefile.bc -DNODEBUG=0 xxx
#     where 'xxx' is the target you want (e.g. 'all', 'test', ...)
#     Please note: I omitted the 'd' suffix for debug versions because Tcl
#     will always call tclpip83.dll and not tclpip83d.dll, causing an error.
#                                                   ^
#     Besides, the debug version goes into a separate directory, so there
#     should be no problem having DLLs and EXEs with the same name.
#     If you prefer your debug version having the 'd' suffix just uncomment
#     the line
#         #DBGX        = d
#
#   - To make a 'normal' version enter
#       make -fmakefile.bc xxx
#     where 'xxx' is the target you want (e.g. 'all', 'test', ...)
#
# DISCLAIMER:
# This makefile has an experimental status - that is those targets which
# have been modified do in fact compile and link with Borland's C++
# Builder 5 and with the free Borland compiler (Borland C++ 5.5).
# However the author assumes no responsiblity for any effect which the use of
# this makefile or of the resulting programs might have on your system.
#
# Not yet modified:
#   - The 'plug-in-DLL' and the associated shell.
#   - The programs to create the windows help files.
#
# Suggestions and / or improvements are always welcome.
#
# May 2001, H. Giese (hgiese@ratiosoft.com)
#

# Does not depend on the presence of any environment variables in
# order to compile tcl; all needed information is derived from
# location of the compiler directories.

#
# Project directories
#
# ROOT    = top of source tree
#
# TOOLS32 = location of Borland development tools.
#
# INSTALLDIR = where the install-targets should copy the binaries and
#     support files
#

ROOT		= ..
INSTALLDIR	= c:\program files\tcl

# If you have C++ Builder 5 or the free Borland C++ 5.5 compiler
# adapt the following paths as appropriate for your system
TOOLS32		= c:\dev\bcc55
TOOLS32_rc	= c:\dev\bcc55
#TOOLS32	= c:\bc55
#TOOLS32_rc	= c:\bc55

cc32		= "$(TOOLS32)\bin\bcc32.exe"
link32		= "$(TOOLS32)\bin\ilink32.exe"
lib32		= "$(TOOLS32)\bin\tlib.exe"
rc32		= "$(TOOLS32_rc)\bin\brcc32.exe"
include32	= -I"$(TOOLS32)\include"
libpath32	= -L"$(TOOLS32)\lib"

# Uncomment the following line to compile with thread support
#THREADDEFINES	= -DTCL_THREADS=1

# Allow definition of NDEBUG via command line
# Set NODEBUG to 0 to compile with symbols
!if !defined(NODEBUG)
NODEBUG		= 1
!endif

#	CFG_ENCODING=encoding
#		name of encoding for configuration information. Defaults
#		to cp1252
!if !defined(CFG_ENCODING)
CFG_ENCODING	= \"cp1252\"
!endif

# The following defines can be used to control the amount of debugging
# code that is added to the compilation.
#
# -DTCL_MEM_DEBUG   Enables the debugging memory allocator.
# -DTCL_COMPILE_DEBUG Enables byte compilation logging.
# -DTCL_COMPILE_STATS Enables byte compilation statistics gathering.
# -DUSE_TCLALLOC=0  Disables the Tcl memory allocator in favor
#       of the native malloc implementation.  This is
#       needed when using Purify.
#
#DEBUGDEFINES	= -DTCL_MEM_DEBUG -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
#DEBUGDEFINES	= -DUSE_TCLALLOC=0

######################################################################
# Do not modify below this line
######################################################################

NAMEPREFIX	= tcl
STUBPREFIX	= $(NAMEPREFIX)stub
DOTVERSION	= 8.5
VERSION		= 85

DDEVERSION = 14
DDEDOTVERSION = 1.4

REGVERSION = 13
REGDOTVERSION = 1.3

BINROOT		= ..
!IF "$(NODEBUG)" == "1"
TMPDIRNAME	= Release
DBGX		=
SYMDEFINES	= -DNDEBUG
!ELSE
TMPDIRNAME	= Debug
#DBGX		= d
DBGX		=
SYMDEFINES	= -DTCL_CFG_DEBUG
!ENDIF
TMPDIR		= $(BINROOT)\$(TMPDIRNAME)
OUTDIRNAME	= $(TMPDIRNAME)
OUTDIR		= $(TMPDIR)

TCLLIB		= $(OUTDIR)\$(NAMEPREFIX)$(VERSION)$(DBGX).lib
TCLDLLNAME	= $(NAMEPREFIX)$(VERSION)$(DBGX).dll
TCLDLL		= $(OUTDIR)\$(TCLDLLNAME)

TCLSTUBLIBNAME	= $(STUBPREFIX)$(VERSION)$(DBGX).lib
TCLSTUBLIB	= $(OUTDIR)\$(TCLSTUBLIBNAME)

TCLPLUGINLIB	= $(OUTDIR)\$(NAMEPREFIX)$(VERSION)p$(DBGX).lib
TCLPLUGINDLLNAME	= $(NAMEPREFIX)$(VERSION)p$(DBGX).dll
TCLPLUGINDLL	= $(OUTDIR)\$(TCLPLUGINDLLNAME)
TCLSH		= $(OUTDIR)\$(NAMEPREFIX)sh$(VERSION)$(DBGX).exe
TCLSHP		= $(OUTDIR)\$(NAMEPREFIX)shp$(VERSION)$(DBGX).exe
TCLPIPEDLLNAME	= $(NAMEPREFIX)pip$(VERSION)$(DBGX).dll
TCLPIPEDLL	= $(OUTDIR)\$(TCLPIPEDLLNAME)
TCLREGDLLNAME	= $(NAMEPREFIX)reg$(REGVERSION)$(DBGX).dll
TCLREGDLL	= $(OUTDIR)\$(TCLREGDLLNAME)
TCLDDEDLLNAME	= $(NAMEPREFIX)dde$(DDEVERSION)$(DBGX).dll
TCLDDEDLL	= $(OUTDIR)\$(TCLDDEDLLNAME)
TCLTEST		= $(OUTDIR)\$(NAMEPREFIX)test.exe
CAT32		= $(TMPDIR)\cat32.exe
RMDIR		= .\rmd.bat
MKDIR		= .\mkd.bat
RM		= del

LIB_INSTALL_DIR	= $(INSTALLDIR)\lib
BIN_INSTALL_DIR	= $(INSTALLDIR)\bin
SCRIPT_INSTALL_DIR	= $(INSTALLDIR)\lib\tcl$(DOTVERSION)
INCLUDE_INSTALL_DIR	= $(INSTALLDIR)\include

TCLSHOBJS	= \
	$(TMPDIR)\tclAppInit.obj

TCLTESTOBJS	= \
	$(TMPDIR)\tclTest.obj \
	$(TMPDIR)\tclTestObj.obj \
	$(TMPDIR)\tclTestProcBodyObj.obj \
	$(TMPDIR)\tclThreadTest.obj \
	$(TMPDIR)\tclWinTest.obj \
	$(TMPDIR)\testMain.obj

TCLOBJS	= \
	$(TMPDIR)\regcomp.obj \
	$(TMPDIR)\regexec.obj \
	$(TMPDIR)\regfree.obj \
	$(TMPDIR)\regerror.obj \
	$(TMPDIR)\tclAlloc.obj \
	$(TMPDIR)\tclAsync.obj \
	$(TMPDIR)\tclBasic.obj \
	$(TMPDIR)\tclBinary.obj \
	$(TMPDIR)\tclCkalloc.obj \
	$(TMPDIR)\tclClock.obj \
	$(TMPDIR)\tclCmdAH.obj \
	$(TMPDIR)\tclCmdIL.obj \
	$(TMPDIR)\tclCmdMZ.obj \
	$(TMPDIR)\tclCompCmds.obj \
	$(TMPDIR)\tclCompExpr.obj \
	$(TMPDIR)\tclCompile.obj \
	$(TMPDIR)\tclConfig.obj \
	$(TMPDIR)\tclDate.obj \
	$(TMPDIR)\tclDictObj.obj \
	$(TMPDIR)\tclEncoding.obj \
	$(TMPDIR)\tclEnv.obj \
	$(TMPDIR)\tclEvent.obj \
	$(TMPDIR)\tclExecute.obj \
	$(TMPDIR)\tclFCmd.obj \
	$(TMPDIR)\tclFileName.obj \
	$(TMPDIR)\tclGet.obj \
	$(TMPDIR)\tclHash.obj \
	$(TMPDIR)\tclHistory.obj \
	$(TMPDIR)\tclIndexObj.obj \
	$(TMPDIR)\tclInterp.obj \
	$(TMPDIR)\tclIO.obj \
	$(TMPDIR)\tclIOCmd.obj \
	$(TMPDIR)\tclIOGT.obj \
	$(TMPDIR)\tclIOSock.obj \
	$(TMPDIR)\tclIOUtil.obj \
	$(TMPDIR)\tclLink.obj \
	$(TMPDIR)\tclLiteral.obj \
	$(TMPDIR)\tclListObj.obj \
	$(TMPDIR)\tclLoad.obj \
	$(TMPDIR)\tclMain.obj \
	$(TMPDIR)\tclNamesp.obj \
	$(TMPDIR)\tclNotify.obj \
	$(TMPDIR)\tclObj.obj \
	$(TMPDIR)\tclPanic.obj \
	$(TMPDIR)\tclParse.obj \
	$(TMPDIR)\tclPipe.obj \
	$(TMPDIR)\tclPkg.obj \
	$(TMPDIR)\tclPkgConfig.obj \
	$(TMPDIR)\tclPosixStr.obj \
	$(TMPDIR)\tclPreserve.obj \
	$(TMPDIR)\tclProc.obj \
	$(TMPDIR)\tclRegexp.obj \
	$(TMPDIR)\tclResolve.obj \
	$(TMPDIR)\tclResult.obj \
	$(TMPDIR)\tclScan.obj \
	$(TMPDIR)\tclStringObj.obj \
	$(TMPDIR)\tclStubInit.obj \
	$(TMPDIR)\tclStubLib.obj \
	$(TMPDIR)\tclThread.obj \
	$(TMPDIR)\tclThreadJoin.obj \
	$(TMPDIR)\tclTimer.obj \
	$(TMPDIR)\tclTrace.obj \
	$(TMPDIR)\tclUtf.obj \
	$(TMPDIR)\tclUtil.obj \
	$(TMPDIR)\tclVar.obj \
	$(TMPDIR)\tclWin32Dll.obj \
	$(TMPDIR)\tclWinChan.obj \
	$(TMPDIR)\tclWinConsole.obj \
	$(TMPDIR)\tclWinSerial.obj \
	$(TMPDIR)\tclWinError.obj \
	$(TMPDIR)\tclWinFCmd.obj \
	$(TMPDIR)\tclWinFile.obj \
	$(TMPDIR)\tclWinInit.obj \
	$(TMPDIR)\tclWinLoad.obj \
	$(TMPDIR)\tclWinNotify.obj \
	$(TMPDIR)\tclWinPipe.obj \
	$(TMPDIR)\tclWinSock.obj \
	$(TMPDIR)\tclWinThrd.obj \
	$(TMPDIR)\tclWinTime.obj

TCLSTUBOBJS	= $(TMPDIR)\tclStubLib.obj

WINDIR		= $(ROOT)\win
GENERICDIR	= $(ROOT)\generic

TCL_INCLUDES	= -I"$(WINDIR)" -I"$(GENERICDIR)"
TCL_DEFINES	= $(DEBUGDEFINES) $(THREADDEFINES) $(SYMDEFINES) \
			$(PROFDEFINES) $(OPTDEFINES) $(SIXFOURDEFINES) \
			-DTCL_CFGVAL_ENCODING=${CFG_ENCODING}

######################################################################
# Compiler flags
######################################################################

!IF "$(NODEBUG)" == "1"
# these macros cause maximum optimization and no symbols
cdebug	= -v- -vi- -O2 -D_DEBUG
!ELSE
# these macros enable debugging
cdebug	= -k -Od -r- -v -vi- -y
!ENDIF

SYSDEFINES	= _MT;NO_STRICT;_NO_VCL

# declarations common to all compiler options
cbase	= -c -q -3 -a4 -g0 -tWM -Ve -Vx -X-
WARNINGS	= -w-rch -w-pch -w-par -w-dup -w-pro -w-dpu

ccons	= -tWC

INCLUDEPATH	= $(include32) $(TCL_INCLUDES)

CFLAGS	= $(cdebug) $(cbase) $(INCLUDEPATH) $(WARNINGS) -D$(SYSDEFINES)
TCL_CFLAGS	= $(CFLAGS) $(TCL_DEFINES)
CONS_CFLAGS	= $(CFLAGS) $(TCL_DEFINES) $(ccons)

######################################################################
# Linker flags
######################################################################

!IF "$(NODEBUG)" == "1"
ldebug	=
!ELSE
ldebug	= -v
!ENDIF

# declarations common to all linker options
LNFLAGS	= -D"" -Gn -I$(TMPDIR) -x $(ldebug) $(libpath32)
# -Gi: create lib file (is -Gl in doc)
# -aa: Windows app, -ap: Windows console app
LNFLAGS_DLL	= -ap -Gi -Tpd
LNFLAGS_CONS	= -ap -Tpe

LNLIBS	= import32 cw32mt


######################################################################
# Project specific targets
######################################################################

release:	setup $(TCLSH) dlls
dlls:		setup $(TCLPIPEDLL) $(TCLREGDLL) $(TCLDDEDLL)
all:		setup $(TCLSH) dlls $(CAT32)
tcltest:	setup $(TCLTEST) dlls $(CAT32)
plugin:		setup $(TCLPLUGINDLL) $(TCLSHP)
install:	install-binaries install-libraries

test:		setup $(TCLTEST) dlls $(CAT32)
	set TCL_LIBRARY=$(ROOT)/library
	$(TCLTEST) $(ROOT)/tests/all.tcl

setup:
	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) &\
		echo *** Created directory '$(OUT_DIR)'
	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) &\
		echo *** Created directory '$(TMP_DIR)'


$(TCLLIB): $(TCLDLL)

$(TCLDLL): $(TCLOBJS) $(TMPDIR)\$(NAMEPREFIX).res
	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 @&&!
		$(TCLOBJS), $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res
!

$(TCLSTUBLIB): $(TCLSTUBOBJS)
	$(lib32) /u $@ $(TCLSTUBOBJS)

$(TCLPLUGINLIB): $(TCLPLUGINDLL)

$(TCLPLUGINDLL): $(TCLOBJS) $(TMPDIR)\tcl.res
	$(link32) $(ldebug) $(dlllflags) \
		-out:$@ $(TMPDIR)\tcl.res $(guilibsdll) @&&!
$(TCLOBJS)
!

$(TCLSH): $(TCLSHOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res
	$(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!
		$(TCLSHOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res
!

$(TCLSHP): $(TCLSHOBJS) $(TCLPLUGINLIB) $(TMPDIR)\tclsh.res
	$(link32) $(ldebug) $(conlflags) $(TMPDIR)\tclsh.res -stack:2300000 \
		-out:$@ $(conlibsdll) $(TCLPLUGINLIB) $(TCLSHOBJS)

$(TCLTEST): $(TCLTESTOBJS) $(TCLLIB) $(TMPDIR)\$(NAMEPREFIX)sh.res
	$(link32) $(ldebug) -S:2400000 $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 @&&!
		$(TCLTESTOBJS), $@, -x, $(LNLIBS) $(TCLLIB),, $(TMPDIR)\$(NAMEPREFIX)sh.res
!

$(TCLPIPEDLL): $(WINDIR)\stub16.c
	$(cc32) $(CFLAGS) -o$(TMPDIR)\stub16.obj $(WINDIR)\stub16.c
	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \
		$(TMPDIR)\stub16.obj, $@, -x, $(LNLIBS),, $(TMPDIR)\$(NAMEPREFIX).res

$(TCLDDEDLL): $(TMPDIR)\tclWinDde.obj $(TCLSTUBLIB)
	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \
		$(TMPDIR)\tclWinDde.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \
		$(TMPDIR)\$(NAMEPREFIX).res

$(TCLREGDLL): $(TMPDIR)\tclWinReg.obj $(TCLSTUBLIB)
	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_DLL) $(TOOLS32)\lib\c0d32 \
		$(TMPDIR)\tclWinReg.obj, $@, -x, $(LNLIBS) $(TCLSTUBLIB),, \
		$(TMPDIR)\$(NAMEPREFIX).res

$(CAT32): $(WINDIR)\cat.c
	$(cc32) $(CONS_CFLAGS) -o$(TMPDIR)\cat.obj $?
	$(link32) $(ldebug) $(LNFLAGS) $(LNFLAGS_CONS) $(TOOLS32)\lib\c0x32 \
		$(TMPDIR)\cat.obj, $@, -x, $(LNLIBS),,

install-binaries: $(TCLSH)
	$(MKDIR) "$(BIN_INSTALL_DIR)"
	$(MKDIR) "$(LIB_INSTALL_DIR)"
	@echo Installing $(TCLDLLNAME)
	@copy "$(TCLDLL)" "$(BIN_INSTALL_DIR)"
	@copy "$(TCLLIB)" "$(LIB_INSTALL_DIR)"
	@echo Installing "$(TCLSH)"
	@copy "$(TCLSH)" "$(BIN_INSTALL_DIR)"
	@echo Installing $(TCLPIPEDLLNAME)
	@copy "$(TCLPIPEDLL)" "$(BIN_INSTALL_DIR)"
	@echo Installing $(TCLSTUBLIBNAME)
	@copy "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)"

install-libraries:
	-@$(MKDIR) "$(LIB_INSTALL_DIR)"
	-@$(MKDIR) "$(INCLUDE_INSTALL_DIR)"
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)"
	@echo Installing http1.0
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http1.0"
	-@copy "$(ROOT)\library\http1.0\http.tcl"     "$(SCRIPT_INSTALL_DIR)\http1.0"
	-@copy "$(ROOT)\library\http1.0\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http1.0"
	@echo Installing http2.7
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\http2.7"
	-@copy "$(ROOT)\library\http\http.tcl"     "$(SCRIPT_INSTALL_DIR)\http2.7"
	-@copy "$(ROOT)\library\http\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\http2.7"
	@echo Installing opt0.4
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\opt0.4"
	-@copy "$(ROOT)\library\opt\optparse.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
	-@copy "$(ROOT)\library\opt\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\opt0.4"
	@echo Installing msgcat1.5
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
	-@copy "$(ROOT)\library\msgcat\msgcat.tcl"   "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
	-@copy "$(ROOT)\library\msgcat\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\msgcat1.5"
	@echo Installing tcltest2.5
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\tcltest2.5"
	-@copy "$(ROOT)\library\tcltest\tcltest.tcl"   "$(SCRIPT_INSTALL_DIR)\tcltest2.5"
	-@copy "$(ROOT)\library\tcltest\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\tcltest2.5"
	@echo Installing platform1.0
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\platform1.0"
	-@copy "$(ROOT)\library\platform\platform.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
	-@copy "$(ROOT)\library\platform\shell.tcl"    "$(SCRIPT_INSTALL_DIR)\platform1.0"
	-@copy "$(ROOT)\library\platform\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\platform1.0"
	@echo Installing $(TCLDDEDLLNAME)
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\dde1.3"
	-@copy "$(TCLDDEDLL)" "$(SCRIPT_INSTALL_DIR)\dde1.3"
	-@copy "$(ROOT)\library\dde\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\dde1.3"
	@echo Installing $(TCLREGDLLNAME)
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\reg1.2"
	-@copy "$(TCLREGDLL)" "$(SCRIPT_INSTALL_DIR)\reg1.2"
	-@copy "$(ROOT)\library\reg\pkgIndex.tcl" "$(SCRIPT_INSTALL_DIR)\reg1.2"
	@echo Installing encoding files
	-@$(MKDIR) "$(SCRIPT_INSTALL_DIR)\encoding"
	-@copy "$(ROOT)\library\encoding\*.enc" "$(SCRIPT_INSTALL_DIR)\encoding"
	@echo Installing library files
	-@copy "$(GENERICDIR)\tcl.h"         "$(INCLUDE_INSTALL_DIR)"
	-@copy "$(GENERICDIR)\tclDecls.h"    "$(INCLUDE_INSTALL_DIR)"
	-@copy "$(GENERICDIR)\tclPlatDecls.h" "$(INCLUDE_INSTALL_DIR)"
	-@copy "$(ROOT)\library\history.tcl" "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\init.tcl"    "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\parray.tcl"  "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\safe.tcl"    "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\tclIndex"    "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\package.tcl" "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\word.tcl"    "$(SCRIPT_INSTALL_DIR)"
	-@copy "$(ROOT)\library\auto.tcl"    "$(SCRIPT_INSTALL_DIR)"

#
# Regenerate the stubs files.
#

genstubs:
	tclsh$(VERSION) $(ROOT)\tools\genStubs.tcl $(GENERICDIR) \
		$(GENERICDIR)\tcl.decls $(GENERICDIR)\tclInt.decls

#
# Regenerate the windows help files.
#

TCLTOOLS	= $(ROOT)/tools
MAN2TCL		= $(TCLTOOLS)/man2tcl
TCLRTF		= $(TCLTOOLS)/tcl.rtf
TCLHPJ		= $(TCLTOOLS)/tcl.hpj
MAN2HELP	= $(TCLTOOLS)/man2help.tcl
HCRTF		= $(TOOLS32)/bin/hcrtf.exe

winhelp: $(TCLRTF)
	cd $(TCLTOOLS)
	start /wait $(HCRTF) -xn $(TCLHPJ)

$(MAN2TCL).exe: $(MAN2TCL).obj
	cd $(TCLTOOLS)
	$(cc32) /nologo /G4 /ML /O2 $(MAN2TCL).c

$(TCLRTF): $(MAN2TCL).exe $(TCLSH)
	cd $(TCLTOOLS)
	..\win\$(TCLSH) $(MAN2HELP) $(NAMEPREFIX) $(VERSION) $(ROOT)/doc ../../tk$(DOTVERSION)/doc

#
# Special case object file targets
#
$(TMPDIR)\tclWinInit.obj: $(WINDIR)\tclWinInit.c
	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?

$(TMPDIR)\testMain.obj: $(WINDIR)\tclAppInit.c
	$(cc32) $(TCL_CFLAGS) -DTCL_TEST -o$(TMPDIR)\testMain.obj $?

$(TMPDIR)\tclTest.obj: $(GENERICDIR)\tclTest.c
	$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?

$(TMPDIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c
	$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?

$(TMPDIR)\tclWinTest.obj: $(WINDIR)\tclWinTest.c
	$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?

$(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c
	$(cc32) $(TCL_CFLAGS) \
		-DCFG_INSTALL_EXEC_PREFIX=\"$(INSTALL_EXEC_PREFIX)\"	\
		-DCFG_INSTALL_PREFIX=\"$(INSTALL_PREFIX)\"		\
		-DCFG_RUNTIME_EXEC_PREFIX=\"$(RUNTIME_EXEC_PREFIX)\"	\
		-DCFG_RUNTIME_PREFIX=\"$(RUNTIME_PREFIX)\"		\
	 -o$(TMPDIR)\$@ $?

$(TMPDIR)\tclAppInit.obj : $(WINDIR)\tclAppInit.c
	$(cc32) $(TCL_CFLAGS) -o$(TMPDIR)\$@ $?

# The following objects should be built using the stub interfaces

# tclWinReg: Produces errors in ANSI mode
$(TMPDIR)\tclWinReg.obj : $(WINDIR)\tclWinReg.c
	$(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?

# tclWinDde: Produces errors in ANSI mode
$(TMPDIR)\tclWinDde.obj : $(WINDIR)\tclWinDde.c
	$(cc32) $(TCL_CFLAGS) -DUSE_TCL_STUBS -o$(TMPDIR)\$@ $?


# The following objects are part of the stub library and should not
# be built as DLL objects but none of the symbols should be exported

$(TMPDIR)\tclStubLib.obj : $(GENERICDIR)\tclStubLib.c
	$(cc32) $(TCL_CFLAGS) -DSTATIC_BUILD -o$(TMPDIR)\$@ $?


# Dedependency rules

$(GENERICDIR)\regcomp.c: \
	$(GENERICDIR)\regguts.h \
	$(GENERICDIR)\regc_lex.c \
	$(GENERICDIR)\regc_color.c \
	$(GENERICDIR)\regc_nfa.c \
	$(GENERICDIR)\regc_cvec.c \
	$(GENERICDIR)\regc_locale.c

$(GENERICDIR)\regcustom.h: \
	$(GENERICDIR)\tclInt.h \
	$(GENERICDIR)\tclPort.h \
	$(GENERICDIR)\regex.h

$(GENERICDIR)\regexec.c: \
	$(GENERICDIR)\rege_dfa.c \
	$(GENERICDIR)\regguts.h

$(GENERICDIR)\regerror.c: $(GENERICDIR)\regguts.h
$(GENERICDIR)\regfree.c: $(GENERICDIR)\regguts.h
$(GENERICDIR)\regfronts.c: $(GENERICDIR)\regguts.h
$(GENERICDIR)\regguts.h: $(GENERICDIR)\regcustom.h

#
# Implicit rules
#

{$(WINDIR)}.c{$(TMPDIR)}.obj:
	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<

{$(GENERICDIR)}.c{$(TMPDIR)}.obj:
	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<

{$(ROOT)\compat}.c{$(TMPDIR)}.obj:
	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) -o$@ $<

{$(WINDIR)}.rc{$(TMPDIR)}.res:
	$(rc32) $(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<

clean:
	-@$(RM) $(OUTDIR)\*.exp
	-@$(RM) $(OUTDIR)\*.lib
	-@$(RM) $(OUTDIR)\*.dll
	-@$(RM) $(OUTDIR)\*.exe
	-@$(RM) $(OUTDIR)\*.pdb
	-@$(RM) $(TMPDIR)\*.pch
	-@$(RM) $(TMPDIR)\*.obj
	-@$(RM) $(TMPDIR)\*.res
	-@$(RM) $(TMPDIR)\*.exe
	-@$(RMDIR) $(OUTDIR)
	-@$(RMDIR) $(TMPDIR)