#------------------------------------------------------------------------------
# makefile.vc --
#
#	Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
# 
# Copyright (c) 1995-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-2000 Ajuba Solutions.
# Copyright (c) 2001-2005 ActiveState Corporation.
# Copyright (c) 2001-2004 David Gravereaux.
#
#------------------------------------------------------------------------------
# RCS: @(#) $Id: makefile.vc,v 1.155 2006/11/09 16:52:31 dgp Exp $
#------------------------------------------------------------------------------

# Check to see we are configured to build with MSVC (MSDEVDIR or MSVCDIR)
# or with the MS Platform SDK (MSSDK). Visual Studio .NET 2003 and 2005 define
# VCINSTALLDIR instead.
!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(MSSDK) && !defined(VCINSTALLDIR)
MSG = ^
You need to run vcvars32.bat from Developer Studio or setenv.bat from the^
Platform SDK first to setup the environment.  Jump to this line to read^
the build instructions.
!error $(MSG)
!endif

#------------------------------------------------------------------------------
# HOW TO USE this makefile:
#
# 1)  It is now necessary to have MSVCDir, MSDevDir or MSSDK set in the
#     environment.  This is used as a check to see if vcvars32.bat had been
#     run prior to running nmake or during the installation of Microsoft
#     Visual C++, MSVCDir had been set globally and the PATH adjusted.
#     Either way is valid.
#
#     You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
#     directory to setup the proper environment, if needed, for your
#     current setup.  This is a needed bootstrap requirement and allows the
#     swapping of different environments to be easier.
#
# 2)  To use the Platform SDK (not expressly needed), run setenv.bat after
#     vcvars32.bat according to the instructions for it.  This can also
#     turn on the 64-bit compiler, if your SDK has it.
#
# 3)  Targets are:
#	release  -- Builds the core, the shell and the dlls. (default)
#	dlls     -- Just builds the windows extensions and the 16-bit DOS
#		    pipe/thunk helper app.
#	shell    -- Just builds the shell and the core.
#	core     -- Only builds the core [tclXX.(dll|lib)].
#	all      -- Builds everything.
#	test     -- Builds and runs the test suite.
#	tcltest  -- Just builds the test shell.
#	install  -- Installs the built binaries and libraries to $(INSTALLDIR)
#		    as the root of the install tree.
#	tidy/clean/hose -- varying levels of cleaning.
#	genstubs -- Rebuilds the Stubs table and support files (dev only).
#	depend   -- Generates an accurate set of source dependancies for this
#		    makefile.  Helpful to avoid problems when the sources are
#		    refreshed and you rebuild, but can "overbuild" when common
#		    headers like tclInt.h just get small changes.
#	winhelp  -- Builds the windows .hlp file for Tcl from the troff man
#		    files found in $(ROOT)\doc .
#
# 4)  Macros usable on the commandline:
#	INSTALLDIR=<path>
#		Sets where to install Tcl from the built binaries.
#		C:\Progra~1\Tcl is assumed when not specified.
#
#	OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,unchecked,none
#		Sets special options for the core.  The default is for none.
#		Any combination of the above may be used (comma separated).
#		'none' will over-ride everything to nothing.
#
#		static  =  Builds a static library of the core instead of a
#			   dll.  The shell will be static (and large), as well.
#		msvcrt  =  Effects the static option only to switch it from
#			   using libcmt(d) as the C runtime [by default] to
#			   msvcrt(d). This is useful for static embedding
#			   support.
#		staticpkg = Effects the static option only to switch
#			   tclshXX.exe to have the dde and reg extension linked
#			   inside it.
#		threads =  Turns on full multithreading support.
#		thrdalloc = Use the thread allocator (shared global free pool).
#		thrdstorage = Use the generic thread storage support.
#		symbols =  Adds symbols for step debugging.
#		profile =  Adds profiling hooks.  Map file is assumed.
#		loimpact =  Adds a flag for how NT treats the heap to keep memory
#			   in use, low.  This is said to impact alloc performance.
#		unchecked = Allows a symbols build to not use the debug
#			   enabled runtime (msvcrt.dll not msvcrtd.dll
#			   or libcmt.lib not libcmtd.lib).
#
#	STATS=memdbg,compdbg,none
#		Sets optional memory and bytecode compiler debugging code added
#		to the core.  The default is for none.  Any combination of the
#		above may be used (comma separated).  'none' will over-ride
#		everything to nothing.
#
#		memdbg   = Enables the debugging memory allocator.
#		compdbg  = Enables byte compilation logging.
#
#	CHECKS=nodep,fullwarn,none
#		Sets special macros for checking compatability.
#
#		nodep	 = Turns off compatability macros to ensure the core
#			    isn't being built with deprecated functions. 
#		fullwarn = Builds with full compiler and link warnings enabled.
#			    Very verbose.
#
#	MACHINE=(IX86|IA64|AMD64|ALPHA)
#		Set the machine type used for the compiler, linker, and
#		resource compiler.  This hook is needed to tell the tools
#		when alternate platforms are requested.  IX86 is the default
#		when not specified.
#
#	TMP_DIR=<path>
#	OUT_DIR=<path>
#		Hooks to allow the intermediate and output directories to be
#		changed.  $(OUT_DIR) is assumed to be 
#		$(BINROOT)\(Release|Debug) based on if symbols are requested.
#		$(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
#
#	TESTPAT=<file>
#		Reads the tests requested to be run from this file.
#
#	CFG_ENCODING=encoding
#		name of encoding for configuration information. Defaults
#		to cp1252
#
# 5)  Examples:
#
#	Basic syntax of calling nmake looks like this:
#	nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
#
#                        Standard (no frills)
#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
#       Setting environment for using Microsoft Visual C++ tools.
#       c:\tcl_src\win\>nmake -f makefile.vc release
#       c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
#
#                         Building for Win64
#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
#       Setting environment for using Microsoft Visual C++ tools.
#       c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
#       Targeting Windows pre64 RETAIL
#       c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
#
#------------------------------------------------------------------------------
#==============================================================================
###############################################################################


#    //==================================================================\\
#   >>[               -> Do not modify below this line. <-               ]<<
#   >>[  Please, use the commandline macros to modify how Tcl is built.  ]<<
#   >>[  If you need more features, send us a patch for more macros.     ]<<
#    \\==================================================================//


###############################################################################
#==============================================================================
#------------------------------------------------------------------------------

!if !exist("makefile.vc")
MSG = ^
You must run this makefile only from the directory it is in.^
Please `cd` to its location first.
!error $(MSG)
!endif

PROJECT	= tcl
!include "rules.vc"

STUBPREFIX = $(PROJECT)stub

!if [nmakehlp -g ../generic/tcl.h TCL_VERSION] == 85
DOTVERSION	= 8.5
!elseif [nmakehlp -g ../generic/tcl.h TCL_VERSION] == 86
DOTVERSION	= 8.6
!elseif [nmakehlp -g ../generic/tcl.h TCL_VERSION] == 90
DOTVERSION	= 9.0
!elseif [nmakehlp -g ../generic/tcl.h TCL_VERSION] == 0
MSG =^
Cannot get version string from ../generic/tcl.h
!error $(MSG)
!endif
VERSION = $(DOTVERSION:.=)

DDEDOTVERSION = 1.3
DDEVERSION = $(DDEDOTVERSION:.=)

REGDOTVERSION = 1.2
REGVERSION = $(REGDOTVERSION:.=)

BINROOT		= .
ROOT		= ..

TCLIMPLIB	= $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
TCLLIBNAME	= $(PROJECT)$(VERSION)$(SUFX).$(EXT)
TCLLIB		= $(OUT_DIR)\$(TCLLIBNAME)

TCLSTUBLIBNAME	= $(STUBPREFIX)$(VERSION).lib
TCLSTUBLIB	= $(OUT_DIR)\$(TCLSTUBLIBNAME)

TCLSHNAME	= $(PROJECT)sh$(VERSION)$(SUFX).exe
TCLSH		= $(OUT_DIR)\$(TCLSHNAME)
TCLPIPEDLLNAME	= $(PROJECT)pip$(VERSION)$(SUFX:t=).dll
TCLPIPEDLL	= $(OUT_DIR)\$(TCLPIPEDLLNAME)

TCLREGLIBNAME	= $(PROJECT)reg$(REGVERSION)$(SUFX:t=).$(EXT)
TCLREGLIB	= $(OUT_DIR)\$(TCLREGLIBNAME)

TCLDDELIBNAME	= $(PROJECT)dde$(DDEVERSION)$(SUFX:t=).$(EXT)
TCLDDELIB	= $(OUT_DIR)\$(TCLDDELIBNAME)

TCLTEST		= $(OUT_DIR)\$(PROJECT)test.exe
CAT32		= $(OUT_DIR)\cat32.exe

### Make sure we use backslash only.
LIB_INSTALL_DIR		= $(_INSTALLDIR)\lib
BIN_INSTALL_DIR		= $(_INSTALLDIR)\bin
DOC_INSTALL_DIR		= $(_INSTALLDIR)\doc
SCRIPT_INSTALL_DIR	= $(_INSTALLDIR)\lib\tcl$(DOTVERSION)
INCLUDE_INSTALL_DIR	= $(_INSTALLDIR)\include

TCLSHOBJS = \
	$(TMP_DIR)\tclAppInit.obj \
!if $(TCL_USE_STATIC_PACKAGES)
	$(TMP_DIR)\tclWinReg.obj \
	$(TMP_DIR)\tclWinDde.obj \
!endif
	$(TMP_DIR)\tclsh.res

TCLTESTOBJS = \
	$(TMP_DIR)\tclTest.obj \
	$(TMP_DIR)\tclTestObj.obj \
	$(TMP_DIR)\tclTestProcBodyObj.obj \
	$(TMP_DIR)\tclThreadTest.obj \
	$(TMP_DIR)\tclWinTest.obj \
!if $(TCL_USE_STATIC_PACKAGES)
	$(TMP_DIR)\tclWinReg.obj \
	$(TMP_DIR)\tclWinDde.obj \
!endif
	$(TMP_DIR)\testMain.obj

TCLOBJS = \
	$(TMP_DIR)\regcomp.obj \
	$(TMP_DIR)\regerror.obj \
	$(TMP_DIR)\regexec.obj \
	$(TMP_DIR)\regfree.obj \
	$(TMP_DIR)\strtoll.obj \
	$(TMP_DIR)\strtoull.obj \
	$(TMP_DIR)\tclAlloc.obj \
	$(TMP_DIR)\tclAsync.obj \
	$(TMP_DIR)\tclBasic.obj \
	$(TMP_DIR)\tclBinary.obj \
	$(TMP_DIR)\tclCkalloc.obj \
	$(TMP_DIR)\tclClock.obj \
	$(TMP_DIR)\tclCmdAH.obj \
	$(TMP_DIR)\tclCmdIL.obj \
	$(TMP_DIR)\tclCmdMZ.obj \
	$(TMP_DIR)\tclCompCmds.obj \
	$(TMP_DIR)\tclCompExpr.obj \
	$(TMP_DIR)\tclCompile.obj \
	$(TMP_DIR)\tclConfig.obj \
	$(TMP_DIR)\tclDate.obj \
	$(TMP_DIR)\tclDictObj.obj \
	$(TMP_DIR)\tclEncoding.obj \
	$(TMP_DIR)\tclEnv.obj \
	$(TMP_DIR)\tclEvent.obj \
	$(TMP_DIR)\tclExecute.obj \
	$(TMP_DIR)\tclFCmd.obj \
	$(TMP_DIR)\tclFileName.obj \
	$(TMP_DIR)\tclGet.obj \
	$(TMP_DIR)\tclHash.obj \
	$(TMP_DIR)\tclHistory.obj \
	$(TMP_DIR)\tclIndexObj.obj \
	$(TMP_DIR)\tclInterp.obj \
	$(TMP_DIR)\tclIO.obj \
	$(TMP_DIR)\tclIOCmd.obj \
	$(TMP_DIR)\tclIOGT.obj \
	$(TMP_DIR)\tclIOSock.obj \
	$(TMP_DIR)\tclIOUtil.obj \
	$(TMP_DIR)\tclIORChan.obj \
	$(TMP_DIR)\tclLink.obj \
	$(TMP_DIR)\tclListObj.obj \
	$(TMP_DIR)\tclLiteral.obj \
	$(TMP_DIR)\tclLoad.obj \
	$(TMP_DIR)\tclMain.obj \
	$(TMP_DIR)\tclNamesp.obj \
	$(TMP_DIR)\tclNotify.obj \
	$(TMP_DIR)\tclObj.obj \
	$(TMP_DIR)\tclPanic.obj \
	$(TMP_DIR)\tclParse.obj \
	$(TMP_DIR)\tclPathObj.obj \
	$(TMP_DIR)\tclPipe.obj \
	$(TMP_DIR)\tclPkg.obj \
	$(TMP_DIR)\tclPkgConfig.obj \
	$(TMP_DIR)\tclPosixStr.obj \
	$(TMP_DIR)\tclPreserve.obj \
	$(TMP_DIR)\tclProc.obj \
	$(TMP_DIR)\tclRegexp.obj \
	$(TMP_DIR)\tclResolve.obj \
	$(TMP_DIR)\tclResult.obj \
	$(TMP_DIR)\tclScan.obj \
	$(TMP_DIR)\tclStringObj.obj \
	$(TMP_DIR)\tclStrToD.obj \
	$(TMP_DIR)\tclStubInit.obj \
	$(TMP_DIR)\tclStubLib.obj \
	$(TMP_DIR)\tclThread.obj \
	$(TMP_DIR)\tclThreadAlloc.obj \
	$(TMP_DIR)\tclThreadJoin.obj \
	$(TMP_DIR)\tclThreadStorage.obj \
	$(TMP_DIR)\tclTimer.obj \
	$(TMP_DIR)\tclTomMathInterface.obj \
	$(TMP_DIR)\tclTrace.obj \
	$(TMP_DIR)\tclUtf.obj \
	$(TMP_DIR)\tclUtil.obj \
	$(TMP_DIR)\tclVar.obj \
	$(TMP_DIR)\tclWin32Dll.obj \
	$(TMP_DIR)\tclWinChan.obj \
	$(TMP_DIR)\tclWinConsole.obj \
	$(TMP_DIR)\tclWinSerial.obj \
	$(TMP_DIR)\tclWinError.obj \
	$(TMP_DIR)\tclWinFCmd.obj \
	$(TMP_DIR)\tclWinFile.obj \
	$(TMP_DIR)\tclWinInit.obj \
	$(TMP_DIR)\tclWinLoad.obj \
	$(TMP_DIR)\tclWinNotify.obj \
	$(TMP_DIR)\tclWinPipe.obj \
	$(TMP_DIR)\tclWinSock.obj \
	$(TMP_DIR)\tclWinThrd.obj \
	$(TMP_DIR)\tclWinTime.obj \
	$(TMP_DIR)\bncore.obj \
	$(TMP_DIR)\bn_reverse.obj \
	$(TMP_DIR)\bn_fast_s_mp_mul_digs.obj \
	$(TMP_DIR)\bn_fast_s_mp_sqr.obj \
	$(TMP_DIR)\bn_mp_add.obj \
	$(TMP_DIR)\bn_mp_add_d.obj \
	$(TMP_DIR)\bn_mp_and.obj \
	$(TMP_DIR)\bn_mp_clamp.obj \
	$(TMP_DIR)\bn_mp_clear.obj \
	$(TMP_DIR)\bn_mp_clear_multi.obj \
	$(TMP_DIR)\bn_mp_cmp.obj \
	$(TMP_DIR)\bn_mp_cmp_d.obj \
	$(TMP_DIR)\bn_mp_cmp_mag.obj \
	$(TMP_DIR)\bn_mp_copy.obj \
	$(TMP_DIR)\bn_mp_count_bits.obj \
	$(TMP_DIR)\bn_mp_div.obj \
	$(TMP_DIR)\bn_mp_div_d.obj \
	$(TMP_DIR)\bn_mp_div_2.obj \
	$(TMP_DIR)\bn_mp_div_2d.obj \
	$(TMP_DIR)\bn_mp_div_3.obj \
	$(TMP_DIR)\bn_mp_exch.obj \
	$(TMP_DIR)\bn_mp_expt_d.obj \
	$(TMP_DIR)\bn_mp_grow.obj \
	$(TMP_DIR)\bn_mp_init.obj \
	$(TMP_DIR)\bn_mp_init_copy.obj \
	$(TMP_DIR)\bn_mp_init_multi.obj \
	$(TMP_DIR)\bn_mp_init_set.obj \
	$(TMP_DIR)\bn_mp_init_size.obj \
	$(TMP_DIR)\bn_mp_karatsuba_mul.obj \
	$(TMP_DIR)\bn_mp_karatsuba_sqr.obj \
	$(TMP_DIR)\bn_mp_lshd.obj \
	$(TMP_DIR)\bn_mp_mod.obj \
	$(TMP_DIR)\bn_mp_mod_2d.obj \
	$(TMP_DIR)\bn_mp_mul.obj \
	$(TMP_DIR)\bn_mp_mul_2.obj \
	$(TMP_DIR)\bn_mp_mul_2d.obj \
	$(TMP_DIR)\bn_mp_mul_d.obj \
	$(TMP_DIR)\bn_mp_neg.obj \
	$(TMP_DIR)\bn_mp_or.obj \
	$(TMP_DIR)\bn_mp_radix_size.obj \
	$(TMP_DIR)\bn_mp_radix_smap.obj \
	$(TMP_DIR)\bn_mp_read_radix.obj \
	$(TMP_DIR)\bn_mp_rshd.obj \
	$(TMP_DIR)\bn_mp_set.obj \
	$(TMP_DIR)\bn_mp_shrink.obj \
	$(TMP_DIR)\bn_mp_sqr.obj \
	$(TMP_DIR)\bn_mp_sqrt.obj \
	$(TMP_DIR)\bn_mp_sub.obj \
	$(TMP_DIR)\bn_mp_sub_d.obj \
	$(TMP_DIR)\bn_mp_to_unsigned_bin.obj \
	$(TMP_DIR)\bn_mp_to_unsigned_bin_n.obj \
	$(TMP_DIR)\bn_mp_toom_mul.obj \
	$(TMP_DIR)\bn_mp_toom_sqr.obj \
	$(TMP_DIR)\bn_mp_toradix_n.obj \
	$(TMP_DIR)\bn_mp_unsigned_bin_size.obj \
	$(TMP_DIR)\bn_mp_xor.obj \
	$(TMP_DIR)\bn_mp_zero.obj \
	$(TMP_DIR)\bn_s_mp_add.obj \
	$(TMP_DIR)\bn_s_mp_mul_digs.obj \
	$(TMP_DIR)\bn_s_mp_sqr.obj \
	$(TMP_DIR)\bn_s_mp_sub.obj \
!if !$(STATIC_BUILD)
	$(TMP_DIR)\tcl.res
!endif

TCLSTUBOBJS = $(TMP_DIR)\tclStubLib.obj

### The following paths CANNOT have spaces in them.
COMPATDIR	= $(ROOT)\compat
DOCDIR		= $(ROOT)\doc
GENERICDIR	= $(ROOT)\generic
TOMMATHDIR	= $(ROOT)\libtommath
TOOLSDIR	= $(ROOT)\tools
WINDIR		= $(ROOT)\win


#---------------------------------------------------------------------
# Compile flags
#---------------------------------------------------------------------

!if !$(DEBUG)
!if $(OPTIMIZING)
### This cranks the optimization level to maximize speed
cdebug	= -O2 $(OPTIMIZATIONS)
!else
cdebug	=
!endif
!else if "$(MACHINE)" == "IA64"
### Warnings are too many, can't support warnings into errors.
cdebug	= -Z7 -Od $(DEBUGFLAGS)
!else
cdebug	= -Z7 -WX $(DEBUGFLAGS)
!endif

### Declarations common to all compiler options
cwarn = -D _CRT_SECURE_NO_DEPRECATE -D _CRT_NONSTDC_NO_DEPRECATE
cflags = -nologo -c $(COMPILERFLAGS) $(cwarn) -Fp$(TMP_DIR)^\

!if $(FULLWARNINGS)
cflags = $(cflags) -W4
!else
cflags = $(cflags) -W3
!endif

!if $(MSVCRT)
!if $(DEBUG) && !$(UNCHECKED)
crt = -MDd
!else
crt = -MD
!endif
!else
!if $(DEBUG) && !$(UNCHECKED)
crt = -MTd
!else
crt = -MT
!endif
!endif

TCL_INCLUDES	= -I"$(WINDIR)" -I"$(GENERICDIR)" -I"$(TOMMATHDIR)"
BASE_CFLAGS	= $(cflags) $(cdebug) $(crt) $(TCL_INCLUDES) \
			-DTCL_PIPE_DLL=\"$(TCLPIPEDLLNAME)\" -DTCL_TOMMATH \
			-DMP_PREC=4
CON_CFLAGS	= $(cflags) $(cdebug) $(crt) -DCONSOLE
TCL_CFLAGS	= $(BASE_CFLAGS) $(OPTDEFINES)
STUB_CFLAGS     = $(cflags) $(cdebug) $(OPTDEFINES)


#---------------------------------------------------------------------
# Link flags
#---------------------------------------------------------------------

!if $(DEBUG)
ldebug	= -debug:full -debugtype:cv
!else
ldebug	= -release -opt:ref -opt:icf,3
!endif

### Declarations common to all linker options
lflags	= -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug)

!if $(FULLWARNINGS)
lflags = $(lflags) -warn:3
!endif

!if $(PROFILE)
lflags	= $(lflags) -profile
!endif

!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
### Align sections for PE size savings.
lflags	= $(lflags) -opt:nowin98
!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
### Align sections for speed in loading by choosing the virtual page size.
lflags	= $(lflags) -align:4096
!endif

!if $(LOIMPACT)
lflags	= $(lflags) -ws:aggressive
!endif

dlllflags = $(lflags) -dll
conlflags = $(lflags) -subsystem:console
guilflags = $(lflags) -subsystem:windows

baselibs   = kernel32.lib user32.lib
# Avoid 'unresolved external symbol __security_cookie' errors.
# c.f. http://support.microsoft.com/?id=894573
!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64"
baselibs   = $(baselibs) bufferoverflowU.lib
!endif

#---------------------------------------------------------------------
# TclTest flags
#---------------------------------------------------------------------

!if "$(TESTPAT)" != ""
TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
!endif


#---------------------------------------------------------------------
# Project specific targets
#---------------------------------------------------------------------

release:    setup $(TCLSH) $(TCLSTUBLIB) dlls
core:	    setup $(TCLLIB) $(TCLSTUBLIB)
shell:	    setup $(TCLSH)
dlls:	    setup $(TCLPIPEDLL) $(TCLREGLIB) $(TCLDDELIB)
all:	    setup $(TCLSH) $(TCLSTUBLIB) dlls $(CAT32) 
tcltest:    setup $(TCLTEST) dlls $(CAT32)
install:    install-binaries install-libraries install-docs


test: setup $(TCLTEST) dlls $(CAT32)
	set TCL_LIBRARY=$(ROOT)/library
!if "$(OS)" == "Windows_NT"  || "$(MSVCDIR)" == "IDE"
	$(TCLTEST) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) -loadfile <<
		set ::ddelib [file normalize $(TCLDDELIB:\=/)]
		set ::reglib [file normalize $(TCLREGLIB:\=/)]
<<
!else
	@echo Please wait while the tests are collected...
	$(TCLTEST) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) -loadfile << > tests.log
		set ::ddelib [file normalize $(TCLDDELIB:\=/)]
		set ::reglib [file normalize $(TCLREGLIB:\=/)]
<<
	type tests.log | more
!endif

runtest: setup $(TCLTEST) dlls $(CAT32)
       set TCL_LIBRARY=$(ROOT)/library
       $(TCLTEST)

setup:
	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)

!if !$(STATIC_BUILD)
$(TCLIMPLIB): $(TCLLIB)
!endif

$(TCLLIB): $(TCLOBJS)
!if $(STATIC_BUILD)
	$(lib32) -nologo -out:$@ @<<
$**
<<
!else
	$(link32) $(dlllflags) -base:@$(WINDIR)\coffbase.txt,tcl -out:$@ \
		$(baselibs) @<<
$**
<<
	$(_VC_MANIFEST_EMBED_DLL)
	-@del $*.exp
!endif

$(TCLSTUBLIB): $(TCLSTUBOBJS)
	$(lib32) -nologo -out:$@ $(TCLSTUBOBJS)

$(TCLSH): $(TCLSHOBJS) $(TCLIMPLIB)
	$(link32) $(conlflags) -stack:2300000 -out:$@ $(baselibs) $**
	$(_VC_MANIFEST_EMBED_EXE)

$(TCLTEST): $(TCLTESTOBJS) $(TCLIMPLIB)
	$(link32) $(conlflags) -stack:2300000 -out:$@ $(baselibs) $**
	$(_VC_MANIFEST_EMBED_EXE)

$(TCLPIPEDLL): $(WINDIR)\stub16.c
	$(cc32) $(CON_CFLAGS) -Fo$(TMP_DIR)\ $(WINDIR)\stub16.c
	$(link32) $(conlflags) -out:$@ $(TMP_DIR)\stub16.obj $(baselibs)
	$(_VC_MANIFEST_EMBED_DLL)

!if $(STATIC_BUILD)
!if !$(TCL_USE_STATIC_PACKAGES)
$(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj
	$(lib32) -nologo -out:$@ $(TMP_DIR)\tclWinDde.obj
!endif
!else
$(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj $(TCLSTUBLIB)
	$(link32) $(dlllflags) -base:@$(WINDIR)\coffbase.txt,tcldde -out:$@ \
		$** $(baselibs)
	$(_VC_MANIFEST_EMBED_DLL)
	-@del $*.exp
	-@del $*.lib
!endif

!if $(STATIC_BUILD)
!if !$(TCL_USE_STATIC_PACKAGES)
$(TCLREGLIB): $(TMP_DIR)\tclWinReg.obj
	$(lib32) -nologo -out:$@ $(TMP_DIR)\tclWinReg.obj
!endif
!else
$(TCLREGLIB): $(TMP_DIR)\tclWinReg.obj $(TCLSTUBLIB)
	$(link32) $(dlllflags) -base:@$(WINDIR)\coffbase.txt,tclreg -out:$@ \
		$** $(baselibs)
	$(_VC_MANIFEST_EMBED_DLL)
	-@del $*.exp
	-@del $*.lib
!endif

$(CAT32): $(WINDIR)\cat.c
	$(cc32) $(CON_CFLAGS) -Fo$(TMP_DIR)\ $?
	$(link32) $(conlflags) -out:$@ -stack:16384 $(TMP_DIR)\cat.obj \
		$(baselibs)
        $(_VC_MANIFEST_EMBED_EXE)

#---------------------------------------------------------------------
# Regenerate the stubs files.  [Development use only]
#---------------------------------------------------------------------

genstubs:
!if !exist($(TCLSH))
	@echo Build tclsh first!
!else
	$(TCLSH) $(TOOLSDIR:\=/)/genStubs.tcl $(GENERICDIR:\=/) \
		$(GENERICDIR:\=/)/tcl.decls $(GENERICDIR:\=/)/tclInt.decls \
		$(GENERICDIR:\=/)/tclTomMath.decls
!endif


#----------------------------------------------------------------------
# The following target generates the file generic/tclTomMath.h.
# It needs to be run (and the results checked) after updating
# to a new release of libtommath.
#----------------------------------------------------------------------

gentommath_h:
!if !exist($(TCLSH))
	@echo Build tclsh first!
!else
	$(TCLSH) "$(TOOLSDIR:\=/)/fix_tommath_h.tcl" \
		"$(TOMMATHDIR:\=/)/tommath.h" \
		> "$(GENERICDIR)\tclTomMath.h"
!endif

#---------------------------------------------------------------------
# Generate the makefile depedancies.
#---------------------------------------------------------------------

depend:
!if !exist($(TCLSH))
	@echo Build tclsh first!
!else
	$(TCLSH) $(TOOLSDIR:\=/)/mkdepend.tcl -vc32 -out:"$(OUT_DIR)\depend.mk" \
		-passthru:"-DBUILD_tcl $(TCL_INCLUDES:"="")" $(GENERICDIR) \
		$(COMPATDIR) $(WINDIR) @<<
$(TCLOBJS)
<<
!endif

#" for emacs font-locking.

#---------------------------------------------------------------------
# Build the windows help file.
#---------------------------------------------------------------------

TCLHLPBASE	= $(PROJECT)$(VERSION)
HELPFILE	= $(OUT_DIR)\$(TCLHLPBASE).hlp
HELPCNT		= $(OUT_DIR)\$(TCLHLPBASE).cnt
DOCTMP_DIR	= $(OUT_DIR)\$(PROJECT)_docs
HELPRTF		= $(DOCTMP_DIR)\$(PROJECT).rtf
MAN2HELP	= $(DOCTMP_DIR)\man2help.tcl
MAN2HELP2	= $(DOCTMP_DIR)\man2help2.tcl
INDEX		= $(DOCTMP_DIR)\index.tcl
BMP		= $(DOCTMP_DIR)\feather.bmp
BMP_NOPATH	= feather.bmp
MAN2TCL		= $(DOCTMP_DIR)\man2tcl.exe

winhelp: docsetup $(HELPFILE)

docsetup:
	@if not exist $(DOCTMP_DIR)\nul mkdir $(DOCTMP_DIR)

$(MAN2HELP) $(MAN2HELP2) $(INDEX) $(BMP): $(TOOLSDIR)\$$(@F)
	@$(CPY) $(TOOLSDIR)\$(@F) $(@D)

$(HELPFILE): $(HELPRTF) $(BMP)
	cd $(DOCTMP_DIR)
	start /wait hcrtf.exe -x <<$(PROJECT).hpj
[OPTIONS]
COMPRESS=12 Hall Zeck
LCID=0x409 0x0 0x0 ; English (United States)
TITLE=Tcl/Tk Reference Manual
BMROOT=.
CNT=$(@B).cnt
HLP=$(@B).hlp

[FILES]
$(PROJECT).rtf

[WINDOWS]
main="Tcl/Tk Reference Manual",,27648,(r15263976),(r65535)

[CONFIG]
BrowseButtons()
CreateButton(1, "Web", ExecFile("http://www.tcl.tk"))
CreateButton(2, "SF", ExecFile("http://sf.net/projects/tcl"))
CreateButton(3, "Wiki", ExecFile("http://wiki.tcl.tk"))
CreateButton(4, "FAQ", ExecFile("http://www.purl.org/NET/Tcl-FAQ/"))
<<
	cd $(MAKEDIR)
	@$(CPY) "$(DOCTMP_DIR)\$(@B).hlp" "$(OUT_DIR)"
	@$(CPY) "$(DOCTMP_DIR)\$(@B).cnt" "$(OUT_DIR)"

$(MAN2TCL): $(TOOLSDIR)\$$(@B).c
	$(cc32) -nologo -G4 -ML -O2 -Fo$(@D)\ $(TOOLSDIR)\$(@B).c -link -out:$@

$(HELPRTF): $(MAN2TCL) $(MAN2HELP) $(MAN2HELP2) $(INDEX) $(DOCDIR)\*
	$(TCLSH) $(MAN2HELP) -bitmap $(BMP_NOPATH) $(PROJECT) $(VERSION) $(DOCDIR:\=/)

install-docs:
!if exist($(HELPFILE))
	@$(CPY) "$(HELPFILE)" "$(DOC_INSTALL_DIR)\"
	@$(CPY) "$(HELPCNT)" "$(DOC_INSTALL_DIR)\"
!endif

#---------------------------------------------------------------------
# Build tclConfig.sh for the TEA build system.
#---------------------------------------------------------------------

tclConfig:
!if !exist($(TCLSH))
	@echo Build tclsh first!
!else
	@echo Creating tclConfig.sh
	@set TCL_LIBRARY=$(ROOT)/library
	@$(TCLSH) <<
	set debug $(DEBUG)
	set thread $(TCL_THREADS)
	set static $(STATIC_BUILD)
	set config(@TCL_DLL_FILE@)       {$(TCLLIBNAME)}
	set config(@TCL_VERSION@)        [info tcl]
	set config(@TCL_MAJOR_VERSION@)  [lindex [split [info tclversion] .] 0]
	set config(@TCL_MINOR_VERSION@)  [lindex [split [info tclversion] .] 1]
	set config(@TCL_PATCH_LEVEL@)    [string range [info patchlevel] [string length [info tclversion]] end]
	set config(@CC@)                 {$(CC)}
	set config(@DEFS@)               {}
	if {$$static} {lappend config(@DEFS@) "-DSTATIC_BUILD=1"}
	if {$$thread} {lappend config(@DEFS@) "-DTHREAD=1"}
	set config(@TCL_DBGX@)           {$(DBGX)}
	set config(@CFLAGS_DEBUG@)       {-nologo -c -W3 -YX -Fp$(TMP_DIR)\ -MDd}
	set config(@CFLAGS_OPTIMIZE@)    {-nologo -c -W3 -YX -Fp$(TMP_DIR)\ -MD}
	set config(@LDFLAGS_DEBUG@)      {-nologo -machine:$(MACHINE) -debug:full -debugtype:cv}
	set config(@LDFLAGS_OPTIMIZE@)   {-nologo -machine:$(MACHINE) -release -opt:ref -opt:icf,3}
	set config(@TCL_SHARED_BUILD@)   [expr {$$static ? 0 : 1}]
	set config(@TCL_LIB_FILE@)       {$(PROJECT)$(VERSION)$(SUFX).lib}
	set config(@TCL_NEEDS_EXP_FILE@) {}
	set config(@CFG_TCL_EXPORT_FILE_SUFFIX@) {$${NODOT_VERSION}$${DBGX}.lib}
	set config(@LIBS@)               {$(baselibs)}
	set config(@prefix@)             {$(_INSTALLDIR)}
	set config(@exec_prefix@)        {$(BIN_INSTALL_DIR)}
	set config(@SHLIB_CFLAGS@)       {}
	set config(@STLIB_CFLAGS@)       {}
	set config(@CFLAGS_WARNING@)     {-W3}
	set config(@EXTRA_CFLAGS@)       {-YX}
	set config(@SHLIB_LD@)           {$(link32) $(dlllflags)}
	set config(@STLIB_LD@)           {$(lib32) -nologo}
	set config(@SHLIB_LD_LIBS@)      {$(baselibs)}
	set config(@SHLIB_SUFFIX@)       {.dll}
	set config(@DL_LIBS@)            {}
	set config(@LDFLAGS@)            {}
	set config(@TCL_LD_SEARCH_FLAGS@) {}
	set config(@LIBOBJS@)            {}
	set config(@RANLIB@)             {}
	set config(@TCL_LIB_FLAG@)       {}
	set config(@TCL_BUILD_LIB_SPEC@) {}
	set config(@TCL_LIB_SPEC@)       {$(LIB_INSTALL_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib}
	set config(@TCL_INCLUDE_SPEC@)   {-I$(INCLUDE_INSTALL_DIR)}
	set config(@TCL_LIB_VERSIONS_OK@)  {}
	set config(@CFG_TCL_SHARED_LIB_SUFFIX@) {$${NODOT_VERSION}$${DBGX}.dll}
	set config(@CFG_TCL_UNSHARED_LIB_SUFFIX@) {$${NODOT_VERSION}$${DBGX}.lib}
	set config(@TCL_SRC_DIR@)        [file nativename [file normalize {$(ROOT)}]]
	set config(@TCL_PACKAGE_PATH@)   {}
	set config(@TCL_STUB_LIB_FILE@)   {$(TCLSTUBLIBNAME)}
	set config(@TCL_STUB_LIB_FLAG@)  {$(TCLSTUBLIBNAME)}
	set config(@TCL_BUILD_STUB_LIB_SPEC@) "-L[file nativename [file normalize {$(OUT_DIR)}]] $(TCLSTUBLIBNAME)"
	set config(@TCL_STUB_LIB_SPEC@)  {-L$(LIB_INSTALL_DIR) $(TCLSTUBLIBNAME)}
	set config(@TCL_BUILD_STUB_LIB_PATH@) [file nativename [file normalize {$(TCLSTUBLIB)}]]
	set config(@TCL_STUB_LIB_PATH@) [file nativename [file normalize {$(LIB_INSTALL_DIR)\\$(TCLSTUBLIBNAME)}]]
	set config(@TCL_THREADS@)       {$(TCL_THREADS)}
	set f [open tclConfig.sh.in r]
	set data [read $$f]
	close $$f
	foreach {anchor subst} [array get config] {
	   regsub -all $$anchor $$data $$subst data
	}
	set f [open [file join [file normalize {$(OUT_DIR)}] tclConfig.sh] w]
	puts $$f $$data
	close $$f
<<
!endif

# The following target generates the file generic/tclDate.c 
# from the yacc grammar found in generic/tclGetDate.y.  This is
# only run by hand as yacc is not available in all environments.
# The name of the .c file is different than the name of the .y file
# so that make doesn't try to automatically regenerate the .c file.

gendate:
	bison --output-file=$(GENERICDIR)/tclDate.c \
	--name-prefix=TclDate \
	$(GENERICDIR)/tclGetDate.y

#---------------------------------------------------------------------
# Special case object file targets
#---------------------------------------------------------------------

$(TMP_DIR)\testMain.obj: $(WINDIR)\tclAppInit.c
	$(cc32) $(TCL_CFLAGS) -DTCL_TEST \
	    -DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \
	    -Fo$@ $?

$(TMP_DIR)\tclTest.obj: $(GENERICDIR)\tclTest.c
	$(cc32) $(TCL_CFLAGS) -Fo$@ $?

$(TMP_DIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c
	$(cc32) $(TCL_CFLAGS) -Fo$@ $?

$(TMP_DIR)\tclWinTest.obj: $(WINDIR)\tclWinTest.c
	$(cc32) $(TCL_CFLAGS) -Fo$@ $?

$(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c
	$(cc32) -DBUILD_tcl $(TCL_CFLAGS) \
	-DCFG_INSTALL_LIBDIR="\"$(LIB_INSTALL_DIR:\=\\)\"" \
	-DCFG_INSTALL_BINDIR="\"$(BIN_INSTALL_DIR:\=\\)\"" \
	-DCFG_INSTALL_SCRDIR="\"$(SCRIPT_INSTALL_DIR:\=\\)\"" \
	-DCFG_INSTALL_INCDIR="\"$(INCLUDE_INSTALL_DIR:\=\\)\"" \
	-DCFG_INSTALL_DOCDIR="\"$(DOC_INSTALL_DIR:\=\\)\""	\
	-DCFG_RUNTIME_LIBDIR="\"$(LIB_INSTALL_DIR:\=\\)\"" \
	-DCFG_RUNTIME_BINDIR="\"$(BIN_INSTALL_DIR:\=\\)\"" \
	-DCFG_RUNTIME_SCRDIR="\"$(SCRIPT_INSTALL_DIR:\=\\)\"" \
	-DCFG_RUNTIME_INCDIR="\"$(INCLUDE_INSTALL_DIR:\=\\)\"" \
	-DCFG_RUNTIME_DOCDIR="\"$(DOC_INSTALL_DIR:\=\\)\""     \
	-Fo$@ $?

$(TMP_DIR)\tclAppInit.obj: $(WINDIR)\tclAppInit.c
	$(cc32) $(TCL_CFLAGS) \
	    -DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \
	    -Fo$@ $?

### The following objects should be built using the stub interfaces
### *ALL* extensions need to built with -DTCL_THREADS=1

$(TMP_DIR)\tclWinReg.obj: $(WINDIR)\tclWinReg.c
!if $(STATIC_BUILD)
	$(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DSTATIC_BUILD -Fo$@ $?
!else
	$(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DUSE_TCL_STUBS -Fo$@ $?
!endif


$(TMP_DIR)\tclWinDde.obj: $(WINDIR)\tclWinDde.c
!if $(STATIC_BUILD)
	$(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DSTATIC_BUILD -Fo$@ $?
!else
	$(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DUSE_TCL_STUBS -Fo$@ $?
!endif


### The following objects are part of the stub library and should not
### be built as DLL objects.  -Zl is used to avoid a dependancy on any
### specific C run-time.

$(TMP_DIR)\tclStubLib.obj: $(GENERICDIR)\tclStubLib.c
	$(cc32) $(STUB_CFLAGS) -Zl -DSTATIC_BUILD $(TCL_INCLUDES) -Fo$@ $?


#---------------------------------------------------------------------
# Dedependency rules
#---------------------------------------------------------------------

$(GENERICDIR)\regcomp.c: \
	$(GENERICDIR)\regguts.h \
	$(GENERICDIR)\regc_lex.c \
	$(GENERICDIR)\regc_color.c \
	$(GENERICDIR)\regc_nfa.c \
	$(GENERICDIR)\regc_cvec.c \
	$(GENERICDIR)\regc_locale.c
$(GENERICDIR)\regcustom.h: \
	$(GENERICDIR)\tclInt.h \
	$(GENERICDIR)\tclPort.h \
	$(GENERICDIR)\regex.h
$(GENERICDIR)\regexec.c: \
	$(GENERICDIR)\rege_dfa.c \
	$(GENERICDIR)\regguts.h
$(GENERICDIR)\regerror.c: $(GENERICDIR)\regguts.h
$(GENERICDIR)\regfree.c: $(GENERICDIR)\regguts.h
$(GENERICDIR)\regfronts.c: $(GENERICDIR)\regguts.h
$(GENERICDIR)\regguts.h: $(GENERICDIR)\regcustom.h

!if exist("$(OUT_DIR)\depend.mk")
!include "$(OUT_DIR)\depend.mk"
!message *** Dependency rules in effect.
!else
!message *** Dependency rules are not being used.
!endif

### add a spacer in the output
!message


#---------------------------------------------------------------------
# Implicit rules
#---------------------------------------------------------------------

{$(WINDIR)}.c{$(TMP_DIR)}.obj::
    $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<<
$<
<<

{$(TOMMATHDIR)}.c{$(TMP_DIR)}.obj::
    $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<<
$<
<<

{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
    $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<<
$<
<<

{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
    $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<<
$<
<<

{$(WINDIR)}.rc{$(TMP_DIR)}.res:
	$(rc32) -fo $@ -r -i "$(GENERICDIR)" \
	    -d DEBUG=$(DEBUG) -d UNCHECKED=$(UNCHECKED) \
	    -d TCL_THREADS=$(TCL_THREADS) \
	    -d STATIC_BUILD=$(STATIC_BUILD) \
	    $<

.SUFFIXES:
.SUFFIXES:.c .rc


#---------------------------------------------------------------------
# Installation.
#---------------------------------------------------------------------

install-binaries:
	@echo Installing to '$(_INSTALLDIR)'
	@echo Installing $(TCLLIBNAME)
!if "$(TCLLIB)" != "$(TCLIMPLIB)"
	@$(CPY) "$(TCLLIB)" "$(BIN_INSTALL_DIR)\"
!endif
	@$(CPY) "$(TCLIMPLIB)" "$(LIB_INSTALL_DIR)\"
!if exist($(TCLSH))
	@echo Installing $(TCLSHNAME)
	@$(CPY) "$(TCLSH)" "$(BIN_INSTALL_DIR)\"
!endif
!if exist($(TCLPIPEDLL))
	@echo Installing $(TCLPIPEDLLNAME)
	@$(CPY) "$(TCLPIPEDLL)" "$(BIN_INSTALL_DIR)\"
!endif
	@echo Installing $(TCLSTUBLIBNAME)
	@$(CPY) "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)\"

#" emacs fix

install-libraries: tclConfig install-msgs install-tzdata
	@if not exist "$(SCRIPT_INSTALL_DIR)" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)"
	@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8"
	@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.2" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.2"
	@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.3" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.3"
	@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4"
	@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5"
	@echo Installing header files
	@$(CPY) "$(GENERICDIR)\tcl.h"             "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tclDecls.h"        "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tclPlatDecls.h"    "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tclTomMath.h"      "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tclTomMathDecls.h" "$(INCLUDE_INSTALL_DIR)\"
        @$(CPY) "$(TOMMATHDIR)\tommath_class.h"   "$(INCLUDE_INSTALL_DIR)\"
        @$(CPY) "$(TOMMATHDIR)\tommath_superclass.h" "$(INCLUDE_INSTALL_DIR)\"
	@echo Installing library files to $(SCRIPT_INSTALL_DIR)
	@$(CPY) "$(ROOT)\library\history.tcl"     "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\init.tcl"        "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\clock.tcl"       "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\tm.tcl"          "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\parray.tcl"      "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\safe.tcl"        "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\tclIndex"        "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\package.tcl"     "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\word.tcl"        "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\auto.tcl"        "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(OUT_DIR)\tclConfig.sh"         "$(LIB_INSTALL_DIR)\"
	@echo Installing library http1.0 directory
	@$(CPY) "$(ROOT)\library\http1.0\*.tcl" \
		"$(SCRIPT_INSTALL_DIR)\http1.0\"
	@echo Installing package http 2.5.3 as a Tcl Module
	@$(COPY) "$(ROOT)\library\http\http.tcl" \
		"$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\http-2.5.3.tm"
	@echo Installing library opt0.4 directory
	@$(CPY) "$(ROOT)\library\opt\*.tcl" \
		"$(SCRIPT_INSTALL_DIR)\opt0.4\"
	@echo Installing package msgcat 1.4 as a Tcl Module
	@$(COPY) "$(ROOT)\library\msgcat\msgcat.tcl" \
	    "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5\msgcat-1.4.2.tm"
	@echo Installing package tcltest 2.3a1 as a Tcl Module
	@$(COPY) "$(ROOT)\library\tcltest\tcltest.tcl" \
	    "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5\tcltest-2.3a1.tm"
	@echo Installing $(TCLDDELIBNAME)
!if $(STATIC_BUILD)
	@$(CPY) "$(TCLDDELIB)" "$(LIB_INSTALL_DIR)\"
!else
	@$(CPY) "$(TCLDDELIB)" "$(LIB_INSTALL_DIR)\dde$(DDEDOTVERSION)\"
	@$(CPY) "$(ROOT)\library\dde\pkgIndex.tcl" \
	    "$(LIB_INSTALL_DIR)\dde$(DDEDOTVERSION)\"
!endif
	@echo Installing $(TCLREGLIBNAME)
!if $(STATIC_BUILD)
	@$(CPY) "$(TCLREGLIB)" "$(LIB_INSTALL_DIR)\"
!else
	@$(CPY) "$(TCLREGLIB)" "$(LIB_INSTALL_DIR)\reg$(REGDOTVERSION)\"
	@$(CPY) "$(ROOT)\library\reg\pkgIndex.tcl" \
	    "$(LIB_INSTALL_DIR)\reg$(REGDOTVERSION)\"
!endif
	@echo Installing encodings
	@$(CPY) "$(ROOT)\library\encoding\*.enc" \
		"$(SCRIPT_INSTALL_DIR)\encoding\"

install-tzdata:
	@echo Installing time zone data
	@set TCL_LIBRARY=$(ROOT)/library
	@$(TCLSH) "$(ROOT)/tools/installData.tcl" \
	    "$(ROOT)/library/tzdata" "$(SCRIPT_INSTALL_DIR)/tzdata"

install-msgs:
	@echo Installing message catalogs
	@set TCL_LIBRARY=$(ROOT)/library
	@$(TCLSH) "$(ROOT)/tools/installData.tcl" \
	    "$(ROOT)/library/msgs" "$(SCRIPT_INSTALL_DIR)/msgs"

#---------------------------------------------------------------------
# Clean up
#---------------------------------------------------------------------

tidy:
!if "$(TCLLIB)" != "$(TCLIMPLIB)"
	@echo Removing $(TCLLIB) ...
	@if exist $(TCLLIB) del $(TCLLIB)
!endif
	@echo Removing $(TCLIMPLIB) ...
	@if exist $(TCLIMPLIB) del $(TCLIMPLIB)
	@echo Removing $(TCLSH) ...
	@if exist $(TCLSH) del $(TCLSH)
	@echo Removing $(TCLTEST) ...
	@if exist $(TCLTEST) del $(TCLTEST)
	@echo Removing $(TCLDDELIB) ...
	@if exist $(TCLDDELIB) del $(TCLDDELIB)
	@echo Removing $(TCLREGLIB) ...
	@if exist $(TCLREGLIB) del $(TCLREGLIB)

clean:
	@echo Cleaning $(TMP_DIR)\* ...
	@if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)

hose:
	@echo Hosing $(OUT_DIR)\* ...
	@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)