#------------------------------------------------------------- -*- makefile -*-
#
#	Microsoft Visual C++ makefile for building Tcl with nmake
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# Copyright (c) 1995-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-2000 Ajuba Solutions.
# Copyright (c) 2001-2005 ActiveState Corporation.
# Copyright (c) 2001-2004 David Gravereaux.
# Copyright (c) 2003-2008 Pat Thoyts.
# Copyright (c) 2017 Ashok P. Nadkarni
#------------------------------------------------------------------------------

# General usage:
#   nmake [-nologo] -f makefile.vc [TARGET|MACRODEF [TARGET|MACRODEF] [...]]
#
# For MACRODEF, see TIP 477 (https://core.tcl-lang.org/tips/doc/trunk/tip/477.md)
# or examine Sections 6-8 in rules.vc.
#
# Possible values of TARGET are:
#	release  -- Builds the core, the shell and the dlls. (default)
#	dlls     -- Just builds the windows extensions
#	shell    -- Just builds the shell and the core.
#	core     -- Only builds the core [tclXX.(dll|lib)].
#	all      -- Builds everything.
#	test     -- Builds and runs the test suite.
#	tcltest  -- Just builds the test shell.
#	install  -- Installs the built binaries and libraries to $(INSTALLDIR)
#		    as the root of the install tree.
#	tidy/clean/hose -- varying levels of cleaning.
#	genstubs -- Rebuilds the Stubs table and support files (dev only).
#	depend   -- Generates an accurate set of source dependancies for this
#		    makefile.  Helpful to avoid problems when the sources are
#		    refreshed and you rebuild, but can "overbuild" when common
#		    headers like tclInt.h just get small changes.
#	htmlhelp -- Builds a Windows .chm help file for Tcl and Tk from the
#		    troff manual pages found in $(ROOT)\doc. You need to
#		    have installed the HTML Help Compiler package from Microsoft
#		    to produce the .chm file.
#
# The steps to setup a Visual C++ environment depend on which
# version of Visual Studio and/or the Windows SDK you are building
# against and are not described here. The simplest method is generally
# to start a command shell using one of the short cuts installed by
# Visual Studio/Windows SDK for the appropriate target architecture.
#
# NOTE: For older (Visual C++ 6 or the 2003 SDK), to use the Platform
# SDK (not expressly needed), run setenv.bat after
# vcvars32.bat according to the instructions for it.  This can also
# turn on the 64-bit compiler, if your SDK has it.
#
# Basic macros and options usable on the commandline (see rules.vc for more info):
#	OPTS=msvcrt,static,staticpkg,symbols,profile,unchecked,time64bit,utfmax,none
#		Sets special options for the core.  The default is for none.
#		Any combination of the above may be used (comma separated).
#		'none' will over-ride everything to nothing.
#
#		msvcrt   = Affects the static option only to switch it from
#			   using libcmt(d) as the C runtime [by default] to
#			   msvcrt(d). This is useful for static embedding
#			   support.
#		static   = Builds a static library of the core instead of a
#			   dll.  The shell will be static (and large), as well.
#		staticpkg= Affects the static option only to switch
#			   tclshXX.exe to have the dde and reg extension linked
#			   inside it.
#		thrdalloc = Use the thread allocator (shared global free pool).
#		symbols =  Adds symbols for step debugging.
#		profile =  Adds profiling hooks.  Map file is assumed.
#		unchecked = Allows a symbols build to not use the debug
#			   enabled runtime (msvcrt.dll not msvcrtd.dll
#			   or libcmt.lib not libcmtd.lib).
#		time64bit = Forces a build using 64-bit time_t for 32-bit build
#			   (CRT library should support this).
#		utfmax =   Forces Tcl_UniChar to be a 32-bit quantity in stead
#			   of 16-bits
#
#	STATS=compdbg,memdbg,none
#		Sets optional memory and bytecode compiler debugging code added
#		to the core.  The default is for none.  Any combination of the
#		above may be used (comma separated).  'none' will over-ride
#		everything to nothing.
#
#		compdbg  = Enables byte compilation logging.
#		memdbg   = Enables the debugging memory allocator.
#
#	CHECKS=64bit,fullwarn,nodep,none
#		Sets special macros for checking compatibility.
#
#		64bit    = Enable 64bit portability warnings (if available)
#		fullwarn = Builds with full compiler and link warnings enabled.
#			    Very verbose.
#		nodep	 = Turns off compatibility macros to ensure the core
#			    isn't being built with deprecated functions.
#
#	MACHINE=(ALPHA|AMD64|IA64|IX86)
#		Set the machine type used for the compiler, linker, and
#		resource compiler.  This hook is needed to tell the tools
#		when alternate platforms are requested.  IX86 is the default
#		when not specified. If the CPU environment variable has been
#		set (ie: recent Platform SDK) then MACHINE is set from CPU.
#
#	TMP_DIR=<path>
#	OUT_DIR=<path>
#		Hooks to allow the intermediate and output directories to be
#		changed.  $(OUT_DIR) is assumed to be
#		$(BINROOT)\(Release|Debug) based on if symbols are requested.
#		$(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
#
#	TESTPAT=<file>
#		Reads the tests requested to be run from this file.
#
#	CFG_ENCODING=encoding
#		name of encoding for configuration information. Defaults
#		to cp1252
#
# Examples:
#       c:\tcl_src\win\>nmake -f makefile.vc release
#       c:\tcl_src\win\>nmake -f makefile.vc test
#       c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
#       c:\tcl_src\win\>nmake -f makefile.vc release OPTS=pdbs
#       c:\tcl_src\win\>nmake -f makefile.vc release OPTS=symbols
#

# NOTE:
# Before modifying this file, check whether the modification is applicable
# to building extensions as well and if so, modify rules.vc instead.

# The PROJECT macro is used by rules.vc for generating appropriate
# macros and rules.
PROJECT = tcl

# Default target to build if no target is specified. If unspecified, the
# rules.vc file will set up "all" as the target.
DEFAULT_BUILD_TARGET = release

# We want to use our own resource file, not the standard template one.
RCFILE = tcl.rc

# The rules.vc file does most of the hard work in terms of defining
# the build configuration, macros, output directories etc.
!include "rules.vc"

# Tcl version info based on macros set up by rules.vc
DOTVERSION      = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION)
VERSION         = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION)

# We need versions of various core packages to generate appropriate
# file names during installation.
!if [echo REM = This file is generated from makefile.vc > versions.vc]
!endif
!if [echo PKG_HTTP_VER = \>> versions.vc] \
   && [nmakehlp -V ..\library\http\pkgIndex.tcl http >> versions.vc]
!endif
!if [echo PKG_TCLTEST_VER = \>> versions.vc] \
   && [nmakehlp -V ..\library\tcltest\pkgIndex.tcl tcltest >> versions.vc]
!endif
!if [echo PKG_MSGCAT_VER = \>> versions.vc] \
   && [nmakehlp -V ..\library\msgcat\pkgIndex.tcl msgcat >> versions.vc]
!endif
!if [echo PKG_PLATFORM_VER = \>> versions.vc] \
   && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform " >> versions.vc]
!endif
!if [echo PKG_SHELL_VER = \>> versions.vc] \
   && [nmakehlp -V ..\library\platform\pkgIndex.tcl "platform::shell" >> versions.vc]
!endif
!if [echo PKG_DDE_VER = \>> versions.vc] \
   && [nmakehlp -V ..\library\dde\pkgIndex.tcl "dde " >> versions.vc]
!endif
!if [echo PKG_REG_VER =\>> versions.vc] \
   && [nmakehlp -V ..\library\reg\pkgIndex.tcl registry >> versions.vc]
!endif

!include versions.vc

DDEDOTVERSION = 1.4
DDEVERSION = $(DDEDOTVERSION:.=)

REGDOTVERSION = 1.3
REGVERSION = $(REGDOTVERSION:.=)

TCLREGLIBNAME	= $(PROJECT)reg$(REGVERSION)$(SUFX:t=).$(EXT)
TCLREGLIB	= $(OUT_DIR)\$(TCLREGLIBNAME)

TCLDDELIBNAME	= $(PROJECT)dde$(DDEVERSION)$(SUFX:t=).$(EXT)
TCLDDELIB	= $(OUT_DIR)\$(TCLDDELIBNAME)

TCLTEST		= $(OUT_DIR)\$(PROJECT)test.exe

TCLSHOBJS = \
	$(TMP_DIR)\tclAppInit.obj \
!if !$(STATIC_BUILD)
!if $(TCL_USE_STATIC_PACKAGES)
	$(TMP_DIR)\tclWinReg.obj \
	$(TMP_DIR)\tclWinDde.obj \
!endif
!endif
	$(TMP_DIR)\tclsh.res

TCLTESTOBJS = \
	$(TMP_DIR)\tclTest.obj \
	$(TMP_DIR)\tclTestObj.obj \
	$(TMP_DIR)\tclTestProcBodyObj.obj \
	$(TMP_DIR)\tclThreadTest.obj \
	$(TMP_DIR)\tclWinTest.obj \
!if !$(STATIC_BUILD)
!if $(TCL_USE_STATIC_PACKAGES)
	$(TMP_DIR)\tclWinReg.obj \
	$(TMP_DIR)\tclWinDde.obj \
!endif
!endif
	$(TMP_DIR)\testMain.obj

COREOBJS = \
	$(TMP_DIR)\regcomp.obj \
	$(TMP_DIR)\regerror.obj \
	$(TMP_DIR)\regexec.obj \
	$(TMP_DIR)\regfree.obj \
	$(TMP_DIR)\tclAlloc.obj \
	$(TMP_DIR)\tclAssembly.obj \
	$(TMP_DIR)\tclAsync.obj \
	$(TMP_DIR)\tclBasic.obj \
	$(TMP_DIR)\tclBinary.obj \
	$(TMP_DIR)\tclCkalloc.obj \
	$(TMP_DIR)\tclClock.obj \
	$(TMP_DIR)\tclCmdAH.obj \
	$(TMP_DIR)\tclCmdIL.obj \
	$(TMP_DIR)\tclCmdMZ.obj \
	$(TMP_DIR)\tclCompCmds.obj \
	$(TMP_DIR)\tclCompCmdsGR.obj \
	$(TMP_DIR)\tclCompCmdsSZ.obj \
	$(TMP_DIR)\tclCompExpr.obj \
	$(TMP_DIR)\tclCompile.obj \
	$(TMP_DIR)\tclConfig.obj \
	$(TMP_DIR)\tclDate.obj \
	$(TMP_DIR)\tclDictObj.obj \
	$(TMP_DIR)\tclDisassemble.obj \
	$(TMP_DIR)\tclEncoding.obj \
	$(TMP_DIR)\tclEnsemble.obj \
	$(TMP_DIR)\tclEnv.obj \
	$(TMP_DIR)\tclEvent.obj \
	$(TMP_DIR)\tclExecute.obj \
	$(TMP_DIR)\tclFCmd.obj \
	$(TMP_DIR)\tclFileName.obj \
	$(TMP_DIR)\tclGet.obj \
	$(TMP_DIR)\tclHash.obj \
	$(TMP_DIR)\tclHistory.obj \
	$(TMP_DIR)\tclIndexObj.obj \
	$(TMP_DIR)\tclInterp.obj \
	$(TMP_DIR)\tclIO.obj \
	$(TMP_DIR)\tclIOCmd.obj \
	$(TMP_DIR)\tclIOGT.obj \
	$(TMP_DIR)\tclIOSock.obj \
	$(TMP_DIR)\tclIOUtil.obj \
	$(TMP_DIR)\tclIORChan.obj \
	$(TMP_DIR)\tclIORTrans.obj \
	$(TMP_DIR)\tclLink.obj \
	$(TMP_DIR)\tclListObj.obj \
	$(TMP_DIR)\tclLiteral.obj \
	$(TMP_DIR)\tclLoad.obj \
	$(TMP_DIR)\tclMainW.obj \
	$(TMP_DIR)\tclMain.obj \
	$(TMP_DIR)\tclNamesp.obj \
	$(TMP_DIR)\tclNotify.obj \
	$(TMP_DIR)\tclOO.obj \
	$(TMP_DIR)\tclOOBasic.obj \
	$(TMP_DIR)\tclOOCall.obj \
	$(TMP_DIR)\tclOODefineCmds.obj \
	$(TMP_DIR)\tclOOInfo.obj \
	$(TMP_DIR)\tclOOMethod.obj \
	$(TMP_DIR)\tclOOStubInit.obj \
	$(TMP_DIR)\tclObj.obj \
	$(TMP_DIR)\tclOptimize.obj \
	$(TMP_DIR)\tclPanic.obj \
	$(TMP_DIR)\tclParse.obj \
	$(TMP_DIR)\tclPathObj.obj \
	$(TMP_DIR)\tclPipe.obj \
	$(TMP_DIR)\tclPkg.obj \
	$(TMP_DIR)\tclPkgConfig.obj \
	$(TMP_DIR)\tclPosixStr.obj \
	$(TMP_DIR)\tclPreserve.obj \
	$(TMP_DIR)\tclProc.obj \
	$(TMP_DIR)\tclProcess.obj \
	$(TMP_DIR)\tclRegexp.obj \
	$(TMP_DIR)\tclResolve.obj \
	$(TMP_DIR)\tclResult.obj \
	$(TMP_DIR)\tclScan.obj \
	$(TMP_DIR)\tclStringObj.obj \
	$(TMP_DIR)\tclStrToD.obj \
	$(TMP_DIR)\tclStubInit.obj \
	$(TMP_DIR)\tclThread.obj \
	$(TMP_DIR)\tclThreadAlloc.obj \
	$(TMP_DIR)\tclThreadJoin.obj \
	$(TMP_DIR)\tclThreadStorage.obj \
	$(TMP_DIR)\tclTimer.obj \
	$(TMP_DIR)\tclTomMathInterface.obj \
	$(TMP_DIR)\tclTrace.obj \
	$(TMP_DIR)\tclUtf.obj \
	$(TMP_DIR)\tclUtil.obj \
	$(TMP_DIR)\tclVar.obj \
	$(TMP_DIR)\tclZipfs.obj \
	$(TMP_DIR)\tclZlib.obj

ZLIBOBJS = \
	$(TMP_DIR)\adler32.obj \
	$(TMP_DIR)\compress.obj \
	$(TMP_DIR)\crc32.obj \
	$(TMP_DIR)\deflate.obj \
	$(TMP_DIR)\infback.obj \
	$(TMP_DIR)\inffast.obj \
	$(TMP_DIR)\inflate.obj \
	$(TMP_DIR)\inftrees.obj \
	$(TMP_DIR)\trees.obj \
	$(TMP_DIR)\uncompr.obj \
	$(TMP_DIR)\zutil.obj

TOMMATHOBJS = \
	$(TMP_DIR)\bn_mp_add.obj \
	$(TMP_DIR)\bn_mp_add_d.obj \
	$(TMP_DIR)\bn_mp_and.obj \
	$(TMP_DIR)\bn_mp_clamp.obj \
	$(TMP_DIR)\bn_mp_clear.obj \
	$(TMP_DIR)\bn_mp_clear_multi.obj \
	$(TMP_DIR)\bn_mp_cmp.obj \
	$(TMP_DIR)\bn_mp_cmp_d.obj \
	$(TMP_DIR)\bn_mp_cmp_mag.obj \
	$(TMP_DIR)\bn_mp_cnt_lsb.obj \
	$(TMP_DIR)\bn_mp_copy.obj \
	$(TMP_DIR)\bn_mp_count_bits.obj \
	$(TMP_DIR)\bn_mp_div.obj \
	$(TMP_DIR)\bn_mp_div_d.obj \
	$(TMP_DIR)\bn_mp_div_2.obj \
	$(TMP_DIR)\bn_mp_div_2d.obj \
	$(TMP_DIR)\bn_mp_div_3.obj \
	$(TMP_DIR)\bn_mp_exch.obj \
	$(TMP_DIR)\bn_mp_expt_u32.obj \
	$(TMP_DIR)\bn_mp_get_mag_ul.obj \
	$(TMP_DIR)\bn_mp_grow.obj \
	$(TMP_DIR)\bn_mp_init.obj \
	$(TMP_DIR)\bn_mp_init_copy.obj \
	$(TMP_DIR)\bn_mp_init_multi.obj \
	$(TMP_DIR)\bn_mp_init_set.obj \
	$(TMP_DIR)\bn_mp_init_size.obj \
	$(TMP_DIR)\bn_mp_init_ul.obj \
	$(TMP_DIR)\bn_mp_isodd.obj \
	$(TMP_DIR)\bn_mp_lshd.obj \
	$(TMP_DIR)\bn_mp_mod.obj \
	$(TMP_DIR)\bn_mp_mod_2d.obj \
	$(TMP_DIR)\bn_mp_mul.obj \
	$(TMP_DIR)\bn_mp_mul_2.obj \
	$(TMP_DIR)\bn_mp_mul_2d.obj \
	$(TMP_DIR)\bn_mp_mul_d.obj \
	$(TMP_DIR)\bn_mp_neg.obj \
	$(TMP_DIR)\bn_mp_or.obj \
	$(TMP_DIR)\bn_mp_radix_size.obj \
	$(TMP_DIR)\bn_mp_radix_smap.obj \
	$(TMP_DIR)\bn_mp_read_radix.obj \
	$(TMP_DIR)\bn_mp_rshd.obj \
	$(TMP_DIR)\bn_mp_set.obj \
	$(TMP_DIR)\bn_mp_set_ul.obj \
	$(TMP_DIR)\bn_mp_shrink.obj \
	$(TMP_DIR)\bn_mp_sqr.obj \
	$(TMP_DIR)\bn_mp_sqrt.obj \
	$(TMP_DIR)\bn_mp_sub.obj \
	$(TMP_DIR)\bn_mp_sub_d.obj \
	$(TMP_DIR)\bn_mp_signed_rsh.obj \
	$(TMP_DIR)\bn_mp_to_ubin.obj \
	$(TMP_DIR)\bn_mp_to_radix.obj \
	$(TMP_DIR)\bn_mp_ubin_size.obj \
	$(TMP_DIR)\bn_mp_xor.obj \
	$(TMP_DIR)\bn_mp_zero.obj \
	$(TMP_DIR)\bn_s_mp_add.obj \
	$(TMP_DIR)\bn_s_mp_balance_mul.obj \
	$(TMP_DIR)\bn_s_mp_get_bit.obj \
	$(TMP_DIR)\bn_s_mp_karatsuba_mul.obj \
	$(TMP_DIR)\bn_s_mp_karatsuba_sqr.obj \
	$(TMP_DIR)\bn_s_mp_mul_digs.obj \
	$(TMP_DIR)\bn_s_mp_mul_digs_fast.obj \
	$(TMP_DIR)\bn_s_mp_reverse.obj \
	$(TMP_DIR)\bn_s_mp_sqr.obj \
	$(TMP_DIR)\bn_s_mp_sqr_fast.obj \
	$(TMP_DIR)\bn_s_mp_sub.obj \
	$(TMP_DIR)\bn_s_mp_toom_sqr.obj \
	$(TMP_DIR)\bn_s_mp_toom_mul.obj

PLATFORMOBJS = \
	$(TMP_DIR)\tclWin32Dll.obj \
	$(TMP_DIR)\tclWinChan.obj \
	$(TMP_DIR)\tclWinConsole.obj \
	$(TMP_DIR)\tclWinError.obj \
	$(TMP_DIR)\tclWinFCmd.obj \
	$(TMP_DIR)\tclWinFile.obj \
	$(TMP_DIR)\tclWinInit.obj \
	$(TMP_DIR)\tclWinLoad.obj \
	$(TMP_DIR)\tclWinNotify.obj \
	$(TMP_DIR)\tclWinPipe.obj \
	$(TMP_DIR)\tclWinSerial.obj \
	$(TMP_DIR)\tclWinSock.obj \
	$(TMP_DIR)\tclWinThrd.obj \
	$(TMP_DIR)\tclWinTime.obj \
!if $(STATIC_BUILD)
	$(TMP_DIR)\tclWinReg.obj \
	$(TMP_DIR)\tclWinDde.obj \
!else
	$(TMP_DIR)\tcl.res
!endif

TCLOBJS = $(COREOBJS) $(ZLIBOBJS) $(TOMMATHOBJS) $(PLATFORMOBJS)

TCLSTUBOBJS = \
	$(TMP_DIR)\tclStubLib.obj \
	$(TMP_DIR)\tclTomMathStubLib.obj \
	$(TMP_DIR)\tclOOStubLib.obj \
	$(TMP_DIR)\tclWinPanic.obj

### The following paths CANNOT have spaces in them as they appear on
### the left side of implicit rules.
TOMMATHDIR	= $(ROOT)\libtommath
PKGSDIR		= $(ROOT)\pkgs

# Additional include and C macro definitions for the implicit rules
# defined in rules.vc
PRJ_INCLUDES	= -I"$(TOMMATHDIR)"
PRJ_DEFINES	= /DTCL_TOMMATH /DMP_PREC=4 /Dinline=__inline /DHAVE_ZLIB=1 /D_CRT_SECURE_NO_DEPRECATE /D_CRT_NONSTDC_NO_DEPRECATE /DMP_FIXED_CUTOFFS /DMP_NO_STDINT /DMP_WUR=

# Additional Link libraries needed beyond those in rules.vc
PRJ_LIBS   = netapi32.lib user32.lib userenv.lib ws2_32.lib

#---------------------------------------------------------------------
# TclTest flags
#---------------------------------------------------------------------

!if "$(TESTPAT)" != ""
TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
!endif


#---------------------------------------------------------------------
# Project specific targets
#---------------------------------------------------------------------

release:    setup $(TCLSH) $(TCLSTUBLIB) dlls pkgs
core:	    setup $(TCLLIB) $(TCLSTUBLIB)
shell:	    setup $(TCLSH)
dlls:	    setup $(TCLREGLIB) $(TCLDDELIB)
all:	    setup $(TCLSH) $(TCLSTUBLIB) dlls pkgs
tcltest:    setup $(TCLTEST) dlls
install:    install-binaries install-libraries install-docs install-pkgs
!if $(SYMBOLS)
install:    install-pdbs
!endif
setup:      default-setup

test: test-core test-pkgs
test-core: setup $(TCLTEST) dlls
	set TCL_LIBRARY=$(ROOT:\=/)/library
	$(DEBUGGER) $(TCLTEST) "$(ROOT:\=/)/tests/all.tcl" $(TESTFLAGS) -loadfile <<
		package ifneeded dde 1.4.2 [list load "$(TCLDDELIB:\=/)" dde]
		package ifneeded registry 1.3.4 [list load "$(TCLREGLIB:\=/)" registry]
<<

runtest: setup $(TCLTEST) dlls
	set TCL_LIBRARY=$(ROOT:\=/)/library
	$(DEBUGGER) $(TCLTEST) $(SCRIPT)

runshell: setup $(TCLSH) dlls
	set TCL_LIBRARY=$(ROOT:\=/)/library
	$(DEBUGGER) $(TCLSH) $(SCRIPT)

!if $(STATIC_BUILD)

$(TCLLIB): $(TCLOBJS)
	$(LIBCMD) @<<
$**
<<

!else

$(TCLLIB): $(TCLOBJS)
	$(DLLCMD) @<<
$**
<<
	$(_VC_MANIFEST_EMBED_DLL)

$(TCLIMPLIB): $(TCLLIB)

!endif # $(STATIC_BUILD)

$(TCLSTUBLIB): $(TCLSTUBOBJS)
	$(LIBCMD) -nodefaultlib $(TCLSTUBOBJS)

$(TCLSH): $(TCLSHOBJS) $(TCLSTUBLIB) $(TCLIMPLIB)
	$(CONEXECMD) -stack:2300000 $**
	$(_VC_MANIFEST_EMBED_EXE)

$(TCLTEST): $(TCLTESTOBJS) $(TCLSTUBLIB) $(TCLIMPLIB)
	$(CONEXECMD) -stack:2300000 $**
	$(_VC_MANIFEST_EMBED_EXE)

!if $(STATIC_BUILD)
$(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj
	$(LIBCMD) $**
!else
$(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj $(TCLSTUBLIB)
	$(DLLCMD) $**
	$(_VC_MANIFEST_EMBED_DLL)
!endif

!if $(STATIC_BUILD)
$(TCLREGLIB): $(TMP_DIR)\tclWinReg.obj
	$(LIBCMD) $**
!else
$(TCLREGLIB): $(TMP_DIR)\tclWinReg.obj $(TCLSTUBLIB)
	$(DLLCMD) $**
	$(_VC_MANIFEST_EMBED_DLL)
!endif

pkgs:
	@for /d %d in ($(PKGSDIR)\*) do \
	  @if exist "%~fd\win\makefile.vc" ( \
	    pushd "%~fd\win" & \
	    $(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) &\
	    popd \
	  )

test-pkgs:
	@for /d %d in ($(PKGSDIR)\*) do \
	  @if exist "%~fd\win\makefile.vc" ( \
	    pushd "%~fd\win" & \
	    $(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) test &\
	    popd \
	  )

install-pkgs:
	@for /d %d in ($(PKGSDIR)\*) do \
	  @if exist "%~fd\win\makefile.vc" ( \
	    pushd "%~fd\win" & \
	    $(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) install &\
	    popd \
	  )

clean-pkgs:
	@for /d %d in ($(PKGSDIR)\*) do \
	  @if exist "%~fd\win\makefile.vc" ( \
	    pushd "%~fd\win" & \
	    $(MAKE) -$(MAKEFLAGS) -f makefile.vc TCLDIR=$(ROOT) clean &\
	    popd \
	  )

#---------------------------------------------------------------------
# Regenerate the stubs files.  [Development use only]
#---------------------------------------------------------------------

genstubs:
!if !exist($(TCLSH))
	@echo Build tclsh first!
!else
	$(TCLSH) $(TOOLSDIR:\=/)/genStubs.tcl $(GENERICDIR:\=/) \
		$(GENERICDIR:\=/)/tcl.decls $(GENERICDIR:\=/)/tclInt.decls \
		$(GENERICDIR:\=/)/tclTomMath.decls
	$(TCLSH) $(TOOLSDIR:\=/)/genStubs.tcl $(GENERICDIR:\=/) \
		$(GENERICDIR:\=/)/tclOO.decls
!endif


#----------------------------------------------------------------------
# The following target generates the file generic/tclTomMath.h.
# It needs to be run (and the results checked) after updating
# to a new release of libtommath.
#----------------------------------------------------------------------

gentommath_h:
!if !exist($(TCLSH))
	@echo Build tclsh first!
!else
	$(TCLSH) "$(TOOLSDIR:\=/)/fix_tommath_h.tcl" \
		"$(TOMMATHDIR:\=/)/tommath.h" \
		> "$(GENERICDIR)\tclTomMath.h"
!endif

#---------------------------------------------------------------------
# Build the Windows HTML help file.
#---------------------------------------------------------------------

# NOTE: you can define HHC on the command-line to override this.
# nmake does not set macro values if already set on the command line.
!if defined(PROCESSOR_ARCHITECTURE) && "$(PROCESSOR_ARCHITECTURE)" == "AMD64"
HHC="%ProgramFiles(x86)%\HTML Help Workshop\hhc.exe"
!else
HHC="%ProgramFiles%\HTML Help Workshop\hhc.exe"
!endif
HTMLDIR=$(OUT_DIR)\html
HTMLBASE=TclTk$(VERSION)
HHPFILE=$(HTMLDIR)\$(HTMLBASE).hhp
CHMFILE=$(HTMLDIR)\$(HTMLBASE).chm

htmlhelp: chmsetup $(CHMFILE)

$(CHMFILE): $(DOCDIR)\*
	@$(TCLSH) $(TOOLSDIR)\tcltk-man2html.tcl "--htmldir=$(HTMLDIR)"
	@echo Compiling HTML help project
	-"$(HHC)" <<$(HHPFILE) >NUL
[OPTIONS]
Compatibility=1.1 or later
Compiled file=$(HTMLBASE).chm
Default topic=contents.htm
Display compile progress=no
Error log file=$(HTMLBASE).log
Full-text search=Yes
Language=0x409 English (United States)
Title=Tcl/Tk $(DOTVERSION) Help
[FILES]
contents.htm
docs.css
Keywords\*.htm
TclCmd\*.htm
TclLib\*.htm
TkCmd\*.htm
TkLib\*.htm
UserCmd\*.htm
<<

chmsetup:
	@if not exist $(HTMLDIR)\nul mkdir $(HTMLDIR)

install-docs:
!if exist("$(CHMFILE)")
	@echo Installing compiled HTML help
	@$(CPY) "$(CHMFILE)" "$(DOC_INSTALL_DIR)\"
!endif

# "emacs font-lock highlighting fix

#---------------------------------------------------------------------
# Generate the tcl.nmake file which contains the options used to build
# Tcl itself. This is used when building extensions.
#---------------------------------------------------------------------
tcl-nmake: $(OUT_DIR)\tcl.nmake
$(OUT_DIR)\tcl.nmake:
	@type << >$@
CORE_MACHINE = $(MACHINE)
CORE_DEBUG = $(DEBUG)
CORE_USE_THREAD_ALLOC = $(USE_THREAD_ALLOC)
<<

#---------------------------------------------------------------------
# Build tclConfig.sh for the TEA build system.
#---------------------------------------------------------------------

tclConfig: $(OUT_DIR)\tclConfig.sh

# TBD - is this tclConfig.sh file ever used? The values are incorrect!
$(OUT_DIR)\tclConfig.sh: $(WIN_DIR)\tclConfig.sh.in
	@echo Creating tclConfig.sh
        @nmakehlp -s << $** >$@
@TCL_DLL_FILE@       $(TCLLIBNAME)
@TCL_VERSION@        $(DOTVERSION)
@TCL_MAJOR_VERSION@  $(TCL_MAJOR_VERSION)
@TCL_MINOR_VERSION@  $(TCL_MINOR_VERSION)
@TCL_PATCH_LEVEL@    $(TCL_PATCH_LEVEL)
@CC@                 $(CC)
@DEFS@               $(pkgcflags)
@CFLAGS_DEBUG@       -nologo -c -W3 -YX -Fp$(TMP_DIR)\ -MDd
@CFLAGS_OPTIMIZE@    -nologo -c -W3 -YX -Fp$(TMP_DIR)\ -MD
@LDFLAGS_DEBUG@      -nologo -machine:$(MACHINE) -debug -debugtype:cv
@LDFLAGS_OPTIMIZE@   -nologo -machine:$(MACHINE) -release -opt:ref -opt:icf,3
@TCL_DBGX@           $(SUFX)
@TCL_LIB_FILE@       $(PROJECT)$(VERSION)$(SUFX).lib
@TCL_NEEDS_EXP_FILE@
@LIBS@               $(baselibs) $(PRJ_LIBS)
@prefix@             $(_INSTALLDIR)
@exec_prefix@        $(BIN_INSTALL_DIR)
@SHLIB_CFLAGS@
@STLIB_CFLAGS@
@CFLAGS_WARNING@     -W3
@EXTRA_CFLAGS@       -YX
@SHLIB_LD@           $(link32) $(dlllflags)
@STLIB_LD@           $(lib32) -nologo
@SHLIB_LD_LIBS@      $(baselibs) $(PRJ_LIBS)
@SHLIB_SUFFIX@       .dll
@DL_LIBS@
@LDFLAGS@
@TCL_CC_SEARCH_FLAGS@
@TCL_LD_SEARCH_FLAGS@
@LIBOBJS@
@RANLIB@
@TCL_LIB_FLAG@
@TCL_BUILD_LIB_SPEC@
@TCL_LIB_SPEC@       $(LIB_INSTALL_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
@TCL_INCLUDE_SPEC@   -I$(INCLUDE_INSTALL_DIR)
@TCL_LIB_VERSIONS_OK@
@TCL_SRC_DIR@        $(ROOT)
@TCL_PACKAGE_PATH@
@TCL_STUB_LIB_FILE@  $(TCLSTUBLIBNAME)
@TCL_STUB_LIB_FLAG@  $(TCLSTUBLIBNAME)
@TCL_STUB_LIB_SPEC@  -L$(LIB_INSTALL_DIR) $(TCLSTUBLIBNAME)
@TCL_BUILD_STUB_LIB_SPEC@ -L$(OUT_DIR) $(TCLSTUBLIBNAME)
@TCL_BUILD_STUB_LIB_PATH@ $(TCLSTUBLIB)
@TCL_STUB_LIB_PATH@  $(LIB_INSTALL_DIR)\$(TCLSTUBLIBNAME)
@CFG_TCL_EXPORT_FILE_SUFFIX@  $(VERSION)$(SUFX).lib
@CFG_TCL_SHARED_LIB_SUFFIX@   $(VERSION)$(SUFX).dll
@CFG_TCL_UNSHARED_LIB_SUFFIX@ $(VERSION)$(SUFX).lib
!if $(STATIC_BUILD)
@TCL_SHARED_BUILD@   0
!else
@TCL_SHARED_BUILD@   1
!endif
<<


#---------------------------------------------------------------------
# The following target generates the file generic/tclDate.c
# from the yacc grammar found in generic/tclGetDate.y.  This is
# only run by hand as yacc is not available in all environments.
# The name of the .c file is different than the name of the .y file
# so that make doesn't try to automatically regenerate the .c file.
#---------------------------------------------------------------------

gendate:
	bison --output-file=$(GENERICDIR)/tclDate.c \
	--name-prefix=TclDate \
	$(GENERICDIR)/tclGetDate.y

#---------------------------------------------------------------------
# Special case object file targets
#---------------------------------------------------------------------

$(TMP_DIR)\testMain.obj: $(WIN_DIR)\tclAppInit.c
	$(cc32) $(appcflags) /DTCL_TEST /DUNICODE /D_UNICODE \
	    /DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \
	    -Fo$@ $?

$(TMP_DIR)\tclMainW.obj: $(GENERICDIR)\tclMain.c
	$(cc32) $(pkgcflags) /DUNICODE /D_UNICODE \
	    -Fo$@ $?

$(TMP_DIR)\tclTest.obj: $(GENERICDIR)\tclTest.c
	$(cc32) $(appcflags) -Fo$@ $?

$(TMP_DIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c
	$(cc32) $(appcflags) -Fo$@ $?

$(TMP_DIR)\tclWinTest.obj: $(WIN_DIR)\tclWinTest.c
	$(CCAPPCMD) $?

$(TMP_DIR)\tclZipfs.obj: $(GENERICDIR)\tclZipfs.c
	$(cc32) $(pkgcflags) -I$(COMPATDIR)\zlib -I$(COMPATDIR)\zlib\contrib\minizip -Fo$@ $?

$(TMP_DIR)\tclZlib.obj: $(GENERICDIR)\tclZlib.c
	$(cc32) $(pkgcflags) -I$(COMPATDIR)\zlib -Fo$@ $?

$(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c
	$(cc32) $(pkgcflags) \
	/DCFG_INSTALL_LIBDIR="\"$(LIB_INSTALL_DIR:\=\\)\"" \
	/DCFG_INSTALL_BINDIR="\"$(BIN_INSTALL_DIR:\=\\)\"" \
	/DCFG_INSTALL_SCRDIR="\"$(SCRIPT_INSTALL_DIR:\=\\)\"" \
	/DCFG_INSTALL_INCDIR="\"$(INCLUDE_INSTALL_DIR:\=\\)\"" \
	/DCFG_INSTALL_DOCDIR="\"$(DOC_INSTALL_DIR:\=\\)\""	\
	/DCFG_RUNTIME_LIBDIR="\"$(LIB_INSTALL_DIR:\=\\)\"" \
	/DCFG_RUNTIME_BINDIR="\"$(BIN_INSTALL_DIR:\=\\)\"" \
	/DCFG_RUNTIME_SCRDIR="\"$(SCRIPT_INSTALL_DIR:\=\\)\"" \
	/DCFG_RUNTIME_INCDIR="\"$(INCLUDE_INSTALL_DIR:\=\\)\"" \
	/DCFG_RUNTIME_DOCDIR="\"$(DOC_INSTALL_DIR:\=\\)\""     \
	/DCFG_RUNTIME_DLLFILE="\"$(CFG_RUNTIME_DLLFILE:\=\\)\""     \
	/DCFG_RUNTIME_ZIPFILE="\"$(CFG_RUNTIME_ZIPFILE:\=\\)\""     \
	-Fo$@ $?

$(TMP_DIR)\tclAppInit.obj: $(WIN_DIR)\tclAppInit.c
	$(cc32) $(appcflags) /DUNICODE /D_UNICODE \
	    /DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \
	    -Fo$@ $?

### The following objects should be built using the stub interfaces

$(TMP_DIR)\tclWinReg.obj: $(WIN_DIR)\tclWinReg.c
	$(cc32) $(appcflags) /DUSE_TCL_STUBS -Fo$@ $?


$(TMP_DIR)\tclWinDde.obj: $(WIN_DIR)\tclWinDde.c
	$(cc32) $(appcflags) /DUSE_TCL_STUBS -Fo$@ $?


### The following objects are part of the stub library and should not
### be built as DLL objects.  -Zl is used to avoid a dependency on any
### specific C run-time.

$(TMP_DIR)\tclStubLib.obj: $(GENERICDIR)\tclStubLib.c
	$(cc32) $(stubscflags) -Fo$@ $?

$(TMP_DIR)\tclTomMathStubLib.obj: $(GENERICDIR)\tclTomMathStubLib.c
	$(cc32) $(stubscflags) -Fo$@ $?

$(TMP_DIR)\tclOOStubLib.obj: $(GENERICDIR)\tclOOStubLib.c
	$(cc32) $(stubscflags) -Fo$@ $?

$(TMP_DIR)\tclWinPanic.obj: $(WIN_DIR)\tclWinPanic.c
	$(cc32) $(stubscflags) -Fo$@ $?

$(TMP_DIR)\tclsh.exe.manifest: $(WIN_DIR)\tclsh.exe.manifest.in
	@nmakehlp -s << $** >$@
@MACHINE@	  $(MACHINE:IX86=X86)
@TCL_WIN_VERSION@  $(DOTVERSION).0.0
<<

#---------------------------------------------------------------------
# Generate the source dependencies.  Having dependency rules will
# improve incremental build accuracy without having to resort to a
# full rebuild just because some non-global header file like
# tclCompile.h was changed.  These rules aren't needed when building
# from scratch.
#---------------------------------------------------------------------

depend:
!if !exist($(TCLSH))
	@echo Build tclsh first!
!else
	$(TCLSH) $(TOOLSDIR:\=/)/mkdepend.tcl -vc32 -out:"$(OUT_DIR)\depend.mk" \
		-passthru:"/DBUILD_tcl $(TCL_INCLUDES) $(PRJ_INCLUDES)" $(GENERICDIR),$$(GENERICDIR) \
		$(COMPATDIR),$$(COMPATDIR) $(TOMMATHDIR),$$(TOMMATHDIR) $(WIN_DIR),$$(WIN_DIR) @<<
$(TCLOBJS)
<<
!endif

#---------------------------------------------------------------------
# Dependency rules
#---------------------------------------------------------------------

!if exist("$(OUT_DIR)\depend.mk")
!include "$(OUT_DIR)\depend.mk"
!message *** Dependency rules in use.
!else
!message *** Dependency rules are not being used.
!endif

### add a spacer in the output
!message


#---------------------------------------------------------------------
# Implicit rules that are not covered by the common ones defined in
# rules.vc. A limitation exists with nmake that requires that
# source directory can not contain spaces in the path.  This an
# absolute.
#---------------------------------------------------------------------

{$(TOMMATHDIR)}.c{$(TMP_DIR)}.obj::
	$(cc32) $(pkgcflags) -Fo$(TMP_DIR)\ @<<
$<
<<

{$(COMPATDIR)\zlib}.c{$(TMP_DIR)}.obj::
	$(cc32) $(pkgcflags) -Fo$(TMP_DIR)\ @<<
$<
<<

$(TMP_DIR)\tclsh.res: $(TMP_DIR)\tclsh.exe.manifest $(WIN_DIR)\tclsh.rc


#---------------------------------------------------------------------
# Installation.
#---------------------------------------------------------------------

install-binaries:
	@echo Installing to '$(_INSTALLDIR)'
	@echo Installing $(TCLLIBNAME)
!if "$(TCLLIB)" != "$(TCLIMPLIB)"
	@$(CPY) "$(TCLLIB)" "$(BIN_INSTALL_DIR)\"
!endif
	@$(CPY) "$(TCLIMPLIB)" "$(LIB_INSTALL_DIR)\"
!if exist($(TCLSH))
	@echo Installing $(TCLSHNAME)
	@$(CPY) "$(TCLSH)" "$(BIN_INSTALL_DIR)\"
!endif
	@echo Installing $(TCLSTUBLIBNAME)
	@$(CPY) "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)\"

install-libraries: tclConfig tcl-nmake install-msgs install-tzdata
	@if not exist "$(SCRIPT_INSTALL_DIR)" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)"
	@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8"
	@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4"
	@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform"
	@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5"
	@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.6" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.6"
	@if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.7" \
		$(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.7"
	@if not exist "$(LIB_INSTALL_DIR)\nmake" \
		$(MKDIR) "$(LIB_INSTALL_DIR)\nmake"
	@echo Installing header files
	@$(CPY) "$(GENERICDIR)\tcl.h"             "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tclDecls.h"        "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tclOO.h"           "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tclOODecls.h"      "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tclPlatDecls.h"    "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tclTomMath.h"      "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(GENERICDIR)\tclTomMathDecls.h" "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(TOMMATHDIR)\tommath_class.h"   "$(INCLUDE_INSTALL_DIR)\"
	@$(CPY) "$(TOMMATHDIR)\tommath_superclass.h" "$(INCLUDE_INSTALL_DIR)\"
	@echo Installing library files to $(SCRIPT_INSTALL_DIR)
	@$(CPY) "$(ROOT)\library\history.tcl"     "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\init.tcl"        "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\clock.tcl"       "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\tm.tcl"          "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\parray.tcl"      "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\safe.tcl"        "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\tclIndex"        "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\package.tcl"     "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\word.tcl"        "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(ROOT)\library\auto.tcl"        "$(SCRIPT_INSTALL_DIR)\"
	@$(CPY) "$(OUT_DIR)\tclConfig.sh"         "$(LIB_INSTALL_DIR)\"
	@$(CPY) "$(WIN_DIR)\tclooConfig.sh"        "$(LIB_INSTALL_DIR)\"
	@$(CPY) "$(WIN_DIR)\rules.vc"              "$(LIB_INSTALL_DIR)\nmake\"
	@$(CPY) "$(WIN_DIR)\targets.vc"              "$(LIB_INSTALL_DIR)\nmake\"
	@$(CPY) "$(WIN_DIR)\nmakehlp.c"            "$(LIB_INSTALL_DIR)\nmake\"
	@$(CPY) "$(OUT_DIR)\tcl.nmake"            "$(LIB_INSTALL_DIR)\nmake\"
	@echo Installing library opt0.4 directory
	@$(CPY) "$(ROOT)\library\opt\*.tcl" \
	    "$(SCRIPT_INSTALL_DIR)\opt0.4\"
	@echo Installing package http $(PKG_HTTP_VER) as a Tcl Module
	@$(COPY) "$(ROOT)\library\http\http.tcl" \
	    "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.6\http-$(PKG_HTTP_VER).tm"
	@echo Installing package msgcat $(PKG_MSGCAT_VER) as a Tcl Module
	@$(COPY) "$(ROOT)\library\msgcat\msgcat.tcl" \
	    "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.7\msgcat-$(PKG_MSGCAT_VER).tm"
	@echo Installing package tcltest $(PKG_TCLTEST_VER) as a Tcl Module
	@$(COPY) "$(ROOT)\library\tcltest\tcltest.tcl" \
	    "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5\tcltest-$(PKG_TCLTEST_VER).tm"
	@echo Installing package platform $(PKG_PLATFORM_VER) as a Tcl Module
	@$(COPY) "$(ROOT)\library\platform\platform.tcl" \
	    "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform-$(PKG_PLATFORM_VER).tm"
	@echo Installing package platform::shell $(PKG_SHELL_VER) as a Tcl Module
	@$(COPY) "$(ROOT)\library\platform\shell.tcl" \
	    "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform\shell-$(PKG_SHELL_VER).tm"
	@echo Installing $(TCLDDELIBNAME)
!if $(STATIC_BUILD)
!if !$(TCL_USE_STATIC_PACKAGES)
	@$(CPY) "$(TCLDDELIB)" "$(LIB_INSTALL_DIR)\"
!endif
!else
	@$(CPY) "$(TCLDDELIB)" "$(LIB_INSTALL_DIR)\dde$(DDEDOTVERSION)\"
	@$(CPY) "$(ROOT)\library\dde\pkgIndex.tcl" \
	    "$(LIB_INSTALL_DIR)\dde$(DDEDOTVERSION)\"
!endif
	@echo Installing $(TCLREGLIBNAME)
!if $(STATIC_BUILD)
!if !$(TCL_USE_STATIC_PACKAGES)
	@$(CPY) "$(TCLREGLIB)" "$(LIB_INSTALL_DIR)\"
!endif
!else
	@$(CPY) "$(TCLREGLIB)" "$(LIB_INSTALL_DIR)\reg$(REGDOTVERSION)\"
	@$(CPY) "$(ROOT)\library\reg\pkgIndex.tcl" \
	    "$(LIB_INSTALL_DIR)\reg$(REGDOTVERSION)\"
!endif
	@echo Installing encodings
	@$(CPY) "$(ROOT)\library\encoding\*.enc" \
		"$(SCRIPT_INSTALL_DIR)\encoding\"
# "emacs font-lock highlighting fix

install-tzdata:
	@echo Installing time zone data
	@set TCL_LIBRARY=$(ROOT:\=/)/library
	@$(TCLSH_NATIVE) "$(ROOT:\=/)/tools/installData.tcl" \
	    "$(ROOT:\=/)/library/tzdata" "$(SCRIPT_INSTALL_DIR)/tzdata"

install-msgs:
	@echo Installing message catalogs
	@set TCL_LIBRARY=$(ROOT:\=/)/library
	@$(TCLSH_NATIVE) "$(ROOT:\=/)/tools/installData.tcl" \
	    "$(ROOT:\=/)/library/msgs" "$(SCRIPT_INSTALL_DIR)/msgs"

install-pdbs:
	@echo Installing debug symbols
	@$(CPY) "$(OUT_DIR)\*.pdb" "$(BIN_INSTALL_DIR)\"
# "emacs font-lock highlighting fix

#---------------------------------------------------------------------
# Clean up
#---------------------------------------------------------------------

tidy:
!if "$(TCLLIB)" != "$(TCLIMPLIB)"
	@echo Removing $(TCLLIB) ...
	@if exist $(TCLLIB) del $(TCLLIB)
!endif
	@echo Removing $(TCLIMPLIB) ...
	@if exist $(TCLIMPLIB) del $(TCLIMPLIB)
	@echo Removing $(TCLSH) ...
	@if exist $(TCLSH) del $(TCLSH)
	@echo Removing $(TCLTEST) ...
	@if exist $(TCLTEST) del $(TCLTEST)
	@echo Removing $(TCLDDELIB) ...
	@if exist $(TCLDDELIB) del $(TCLDDELIB)
	@echo Removing $(TCLREGLIB) ...
	@if exist $(TCLREGLIB) del $(TCLREGLIB)

clean: default-clean clean-pkgs
hose: default-hose
realclean: hose

# Local Variables:
# mode: makefile
# End: