#------------------------------------------------------------------------------ # makefile.vc -- # # Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. # # Copyright (c) 1995-1996 Sun Microsystems, Inc. # Copyright (c) 1998-2000 Ajuba Solutions. # Copyright (c) 2001-2005 ActiveState Corporation. # Copyright (c) 2001-2004 David Gravereaux. # #------------------------------------------------------------------------------ # RCS: @(#) $Id: makefile.vc,v 1.160.2.6 2007/10/16 03:50:34 dgp Exp $ #------------------------------------------------------------------------------ # Check to see we are configured to build with MSVC (MSDEVDIR or MSVCDIR) # or with the MS Platform SDK (MSSDK). Visual Studio .NET 2003 and 2005 define # VCINSTALLDIR instead. !if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(MSSDK) && !defined(VCINSTALLDIR) MSG = ^ You need to run vcvars32.bat from Developer Studio or setenv.bat from the^ Platform SDK first to setup the environment. Jump to this line to read^ the build instructions. !error $(MSG) !endif #------------------------------------------------------------------------------ # HOW TO USE this makefile: # # 1) It is now necessary to have MSVCDir, MSDevDir or MSSDK set in the # environment. This is used as a check to see if vcvars32.bat had been # run prior to running nmake or during the installation of Microsoft # Visual C++, MSVCDir had been set globally and the PATH adjusted. # Either way is valid. # # You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin # directory to setup the proper environment, if needed, for your # current setup. This is a needed bootstrap requirement and allows the # swapping of different environments to be easier. # # 2) To use the Platform SDK (not expressly needed), run setenv.bat after # vcvars32.bat according to the instructions for it. This can also # turn on the 64-bit compiler, if your SDK has it. # # 3) Targets are: # release -- Builds the core, the shell and the dlls. (default) # dlls -- Just builds the windows extensions and the 16-bit DOS # pipe/thunk helper app. # shell -- Just builds the shell and the core. # core -- Only builds the core [tclXX.(dll|lib)]. # all -- Builds everything. # test -- Builds and runs the test suite. # tcltest -- Just builds the test shell. # install -- Installs the built binaries and libraries to $(INSTALLDIR) # as the root of the install tree. # tidy/clean/hose -- varying levels of cleaning. # genstubs -- Rebuilds the Stubs table and support files (dev only). # depend -- Generates an accurate set of source dependancies for this # makefile. Helpful to avoid problems when the sources are # refreshed and you rebuild, but can "overbuild" when common # headers like tclInt.h just get small changes. # winhelp -- Builds the windows .hlp file for Tcl from the troff man # files found in $(ROOT)\doc . # # 4) Macros usable on the commandline: # INSTALLDIR= # Sets where to install Tcl from the built binaries. # C:\Progra~1\Tcl is assumed when not specified. # # OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,unchecked,none # Sets special options for the core. The default is for none. # Any combination of the above may be used (comma separated). # 'none' will over-ride everything to nothing. # # static = Builds a static library of the core instead of a # dll. The shell will be static (and large), as well. # msvcrt = Effects the static option only to switch it from # using libcmt(d) as the C runtime [by default] to # msvcrt(d). This is useful for static embedding # support. # staticpkg = Effects the static option only to switch # tclshXX.exe to have the dde and reg extension linked # inside it. # threads = Turns on full multithreading support. # thrdalloc = Use the thread allocator (shared global free pool). # thrdstorage = Use the generic thread storage support. # symbols = Adds symbols for step debugging. # profile = Adds profiling hooks. Map file is assumed. # loimpact = Adds a flag for how NT treats the heap to keep memory # in use, low. This is said to impact alloc performance. # unchecked = Allows a symbols build to not use the debug # enabled runtime (msvcrt.dll not msvcrtd.dll # or libcmt.lib not libcmtd.lib). # # STATS=memdbg,compdbg,none # Sets optional memory and bytecode compiler debugging code added # to the core. The default is for none. Any combination of the # above may be used (comma separated). 'none' will over-ride # everything to nothing. # # memdbg = Enables the debugging memory allocator. # compdbg = Enables byte compilation logging. # # CHECKS=nodep,fullwarn,64bit,none # Sets special macros for checking compatability. # # nodep = Turns off compatability macros to ensure the core # isn't being built with deprecated functions. # fullwarn = Builds with full compiler and link warnings enabled. # Very verbose. # 64bit = Enable 64bit portability warnings (if available) # # MACHINE=(IX86|IA64|AMD64|ALPHA) # Set the machine type used for the compiler, linker, and # resource compiler. This hook is needed to tell the tools # when alternate platforms are requested. IX86 is the default # when not specified. # # TMP_DIR= # OUT_DIR= # Hooks to allow the intermediate and output directories to be # changed. $(OUT_DIR) is assumed to be # $(BINROOT)\(Release|Debug) based on if symbols are requested. # $(TMP_DIR) will de $(OUT_DIR)\ by default. # # TESTPAT= # Reads the tests requested to be run from this file. # # CFG_ENCODING=encoding # name of encoding for configuration information. Defaults # to cp1252 # # 5) Examples: # # Basic syntax of calling nmake looks like this: # nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] # # Standard (no frills) # c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat # Setting environment for using Microsoft Visual C++ tools. # c:\tcl_src\win\>nmake -f makefile.vc release # c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl # # Building for Win64 # c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat # Setting environment for using Microsoft Visual C++ tools. # c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL # Targeting Windows pre64 RETAIL # c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64 # #------------------------------------------------------------------------------ #============================================================================== ############################################################################### # //==================================================================\\ # >>[ -> Do not modify below this line. <- ]<< # >>[ Please, use the commandline macros to modify how Tcl is built. ]<< # >>[ If you need more features, send us a patch for more macros. ]<< # \\==================================================================// ############################################################################### #============================================================================== #------------------------------------------------------------------------------ !if !exist("makefile.vc") MSG = ^ You must run this makefile only from the directory it is in.^ Please `cd` to its location first. !error $(MSG) !endif PROJECT = tcl !include "rules.vc" STUBPREFIX = $(PROJECT)stub DOTVERSION = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION) VERSION = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION) DDEDOTVERSION = 1.3 DDEVERSION = $(DDEDOTVERSION:.=) REGDOTVERSION = 1.2 REGVERSION = $(REGDOTVERSION:.=) BINROOT = . ROOT = .. TCLIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib TCLLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) TCLLIB = $(OUT_DIR)\$(TCLLIBNAME) TCLSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib TCLSTUBLIB = $(OUT_DIR)\$(TCLSTUBLIBNAME) TCLSHNAME = $(PROJECT)sh$(VERSION)$(SUFX).exe TCLSH = $(OUT_DIR)\$(TCLSHNAME) TCLPIPEDLLNAME = $(PROJECT)pip$(VERSION)$(SUFX:t=).dll TCLPIPEDLL = $(OUT_DIR)\$(TCLPIPEDLLNAME) TCLREGLIBNAME = $(PROJECT)reg$(REGVERSION)$(SUFX:t=).$(EXT) TCLREGLIB = $(OUT_DIR)\$(TCLREGLIBNAME) TCLDDELIBNAME = $(PROJECT)dde$(DDEVERSION)$(SUFX:t=).$(EXT) TCLDDELIB = $(OUT_DIR)\$(TCLDDELIBNAME) TCLTEST = $(OUT_DIR)\$(PROJECT)test.exe CAT32 = $(OUT_DIR)\cat32.exe ### Make sure we use backslash only. LIB_INSTALL_DIR = $(_INSTALLDIR)\lib BIN_INSTALL_DIR = $(_INSTALLDIR)\bin DOC_INSTALL_DIR = $(_INSTALLDIR)\doc SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\tcl$(DOTVERSION) INCLUDE_INSTALL_DIR = $(_INSTALLDIR)\include TCLSHOBJS = \ $(TMP_DIR)\tclAppInit.obj \ !if $(TCL_USE_STATIC_PACKAGES) $(TMP_DIR)\tclWinReg.obj \ $(TMP_DIR)\tclWinDde.obj \ !endif $(TMP_DIR)\tclsh.res TCLTESTOBJS = \ $(TMP_DIR)\tclTest.obj \ $(TMP_DIR)\tclTestObj.obj \ $(TMP_DIR)\tclTestProcBodyObj.obj \ $(TMP_DIR)\tclThreadTest.obj \ $(TMP_DIR)\tclWinTest.obj \ !if $(TCL_USE_STATIC_PACKAGES) $(TMP_DIR)\tclWinReg.obj \ $(TMP_DIR)\tclWinDde.obj \ !endif $(TMP_DIR)\testMain.obj TCLOBJS = \ $(TMP_DIR)\regcomp.obj \ $(TMP_DIR)\regerror.obj \ $(TMP_DIR)\regexec.obj \ $(TMP_DIR)\regfree.obj \ $(TMP_DIR)\tclAlloc.obj \ $(TMP_DIR)\tclAsync.obj \ $(TMP_DIR)\tclBasic.obj \ $(TMP_DIR)\tclBinary.obj \ $(TMP_DIR)\tclCkalloc.obj \ $(TMP_DIR)\tclClock.obj \ $(TMP_DIR)\tclCmdAH.obj \ $(TMP_DIR)\tclCmdIL.obj \ $(TMP_DIR)\tclCmdMZ.obj \ $(TMP_DIR)\tclCompCmds.obj \ $(TMP_DIR)\tclCompExpr.obj \ $(TMP_DIR)\tclCompile.obj \ $(TMP_DIR)\tclConfig.obj \ $(TMP_DIR)\tclDate.obj \ $(TMP_DIR)\tclDictObj.obj \ $(TMP_DIR)\tclEncoding.obj \ $(TMP_DIR)\tclEnv.obj \ $(TMP_DIR)\tclEvent.obj \ $(TMP_DIR)\tclExecute.obj \ $(TMP_DIR)\tclFCmd.obj \ $(TMP_DIR)\tclFileName.obj \ $(TMP_DIR)\tclGet.obj \ $(TMP_DIR)\tclHash.obj \ $(TMP_DIR)\tclHistory.obj \ $(TMP_DIR)\tclIndexObj.obj \ $(TMP_DIR)\tclInterp.obj \ $(TMP_DIR)\tclIO.obj \ $(TMP_DIR)\tclIOCmd.obj \ $(TMP_DIR)\tclIOGT.obj \ $(TMP_DIR)\tclIOSock.obj \ $(TMP_DIR)\tclIOUtil.obj \ $(TMP_DIR)\tclIORChan.obj \ $(TMP_DIR)\tclLink.obj \ $(TMP_DIR)\tclListObj.obj \ $(TMP_DIR)\tclLiteral.obj \ $(TMP_DIR)\tclLoad.obj \ $(TMP_DIR)\tclMain.obj \ $(TMP_DIR)\tclNamesp.obj \ $(TMP_DIR)\tclNotify.obj \ $(TMP_DIR)\tclObj.obj \ $(TMP_DIR)\tclPanic.obj \ $(TMP_DIR)\tclParse.obj \ $(TMP_DIR)\tclPathObj.obj \ $(TMP_DIR)\tclPipe.obj \ $(TMP_DIR)\tclPkg.obj \ $(TMP_DIR)\tclPkgConfig.obj \ $(TMP_DIR)\tclPosixStr.obj \ $(TMP_DIR)\tclPreserve.obj \ $(TMP_DIR)\tclProc.obj \ $(TMP_DIR)\tclRegexp.obj \ $(TMP_DIR)\tclResolve.obj \ $(TMP_DIR)\tclResult.obj \ $(TMP_DIR)\tclScan.obj \ $(TMP_DIR)\tclStringObj.obj \ $(TMP_DIR)\tclStrToD.obj \ $(TMP_DIR)\tclStubInit.obj \ $(TMP_DIR)\tclStubLib.obj \ $(TMP_DIR)\tclThread.obj \ $(TMP_DIR)\tclThreadAlloc.obj \ $(TMP_DIR)\tclThreadJoin.obj \ $(TMP_DIR)\tclThreadStorage.obj \ $(TMP_DIR)\tclTimer.obj \ $(TMP_DIR)\tclTomMathInterface.obj \ $(TMP_DIR)\tclTrace.obj \ $(TMP_DIR)\tclUtf.obj \ $(TMP_DIR)\tclUtil.obj \ $(TMP_DIR)\tclVar.obj \ $(TMP_DIR)\tclWin32Dll.obj \ $(TMP_DIR)\tclWinChan.obj \ $(TMP_DIR)\tclWinConsole.obj \ $(TMP_DIR)\tclWinSerial.obj \ $(TMP_DIR)\tclWinError.obj \ $(TMP_DIR)\tclWinFCmd.obj \ $(TMP_DIR)\tclWinFile.obj \ $(TMP_DIR)\tclWinInit.obj \ $(TMP_DIR)\tclWinLoad.obj \ $(TMP_DIR)\tclWinNotify.obj \ $(TMP_DIR)\tclWinPipe.obj \ $(TMP_DIR)\tclWinSock.obj \ $(TMP_DIR)\tclWinThrd.obj \ $(TMP_DIR)\tclWinTime.obj \ $(TMP_DIR)\bncore.obj \ $(TMP_DIR)\bn_reverse.obj \ $(TMP_DIR)\bn_fast_s_mp_mul_digs.obj \ $(TMP_DIR)\bn_fast_s_mp_sqr.obj \ $(TMP_DIR)\bn_mp_add.obj \ $(TMP_DIR)\bn_mp_add_d.obj \ $(TMP_DIR)\bn_mp_and.obj \ $(TMP_DIR)\bn_mp_clamp.obj \ $(TMP_DIR)\bn_mp_clear.obj \ $(TMP_DIR)\bn_mp_clear_multi.obj \ $(TMP_DIR)\bn_mp_cmp.obj \ $(TMP_DIR)\bn_mp_cmp_d.obj \ $(TMP_DIR)\bn_mp_cmp_mag.obj \ $(TMP_DIR)\bn_mp_copy.obj \ $(TMP_DIR)\bn_mp_count_bits.obj \ $(TMP_DIR)\bn_mp_div.obj \ $(TMP_DIR)\bn_mp_div_d.obj \ $(TMP_DIR)\bn_mp_div_2.obj \ $(TMP_DIR)\bn_mp_div_2d.obj \ $(TMP_DIR)\bn_mp_div_3.obj \ $(TMP_DIR)\bn_mp_exch.obj \ $(TMP_DIR)\bn_mp_expt_d.obj \ $(TMP_DIR)\bn_mp_grow.obj \ $(TMP_DIR)\bn_mp_init.obj \ $(TMP_DIR)\bn_mp_init_copy.obj \ $(TMP_DIR)\bn_mp_init_multi.obj \ $(TMP_DIR)\bn_mp_init_set.obj \ $(TMP_DIR)\bn_mp_init_size.obj \ $(TMP_DIR)\bn_mp_karatsuba_mul.obj \ $(TMP_DIR)\bn_mp_karatsuba_sqr.obj \ $(TMP_DIR)\bn_mp_lshd.obj \ $(TMP_DIR)\bn_mp_mod.obj \ $(TMP_DIR)\bn_mp_mod_2d.obj \ $(TMP_DIR)\bn_mp_mul.obj \ $(TMP_DIR)\bn_mp_mul_2.obj \ $(TMP_DIR)\bn_mp_mul_2d.obj \ $(TMP_DIR)\bn_mp_mul_d.obj \ $(TMP_DIR)\bn_mp_neg.obj \ $(TMP_DIR)\bn_mp_or.obj \ $(TMP_DIR)\bn_mp_radix_size.obj \ $(TMP_DIR)\bn_mp_radix_smap.obj \ $(TMP_DIR)\bn_mp_read_radix.obj \ $(TMP_DIR)\bn_mp_rshd.obj \ $(TMP_DIR)\bn_mp_set.obj \ $(TMP_DIR)\bn_mp_shrink.obj \ $(TMP_DIR)\bn_mp_sqr.obj \ $(TMP_DIR)\bn_mp_sqrt.obj \ $(TMP_DIR)\bn_mp_sub.obj \ $(TMP_DIR)\bn_mp_sub_d.obj \ $(TMP_DIR)\bn_mp_to_unsigned_bin.obj \ $(TMP_DIR)\bn_mp_to_unsigned_bin_n.obj \ $(TMP_DIR)\bn_mp_toom_mul.obj \ $(TMP_DIR)\bn_mp_toom_sqr.obj \ $(TMP_DIR)\bn_mp_toradix_n.obj \ $(TMP_DIR)\bn_mp_unsigned_bin_size.obj \ $(TMP_DIR)\bn_mp_xor.obj \ $(TMP_DIR)\bn_mp_zero.obj \ $(TMP_DIR)\bn_s_mp_add.obj \ $(TMP_DIR)\bn_s_mp_mul_digs.obj \ $(TMP_DIR)\bn_s_mp_sqr.obj \ $(TMP_DIR)\bn_s_mp_sub.obj \ !if !$(STATIC_BUILD) $(TMP_DIR)\tcl.res !endif TCLSTUBOBJS = $(TMP_DIR)\tclStubLib.obj ### The following paths CANNOT have spaces in them. COMPATDIR = $(ROOT)\compat DOCDIR = $(ROOT)\doc GENERICDIR = $(ROOT)\generic TOMMATHDIR = $(ROOT)\libtommath TOOLSDIR = $(ROOT)\tools WINDIR = $(ROOT)\win #--------------------------------------------------------------------- # Compile flags #--------------------------------------------------------------------- !if !$(DEBUG) !if $(OPTIMIZING) ### This cranks the optimization level to maximize speed cdebug = -O2 $(OPTIMIZATIONS) !else cdebug = !endif !else if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" ### Warnings are too many, can't support warnings into errors. cdebug = -Zi -Od $(DEBUGFLAGS) !else cdebug = -Zi -WX $(DEBUGFLAGS) !endif ### Declarations common to all compiler options cwarn = $(WARNINGS) -D _CRT_SECURE_NO_DEPRECATE -D _CRT_NONSTDC_NO_DEPRECATE cflags = -nologo -c $(COMPILERFLAGS) $(cwarn) -Fp$(TMP_DIR)^\ !if $(MSVCRT) !if $(DEBUG) && !$(UNCHECKED) crt = -MDd !else crt = -MD !endif !else !if $(DEBUG) && !$(UNCHECKED) crt = -MTd !else crt = -MT !endif !endif TCL_INCLUDES = -I"$(WINDIR)" -I"$(GENERICDIR)" -I"$(TOMMATHDIR)" TCL_DEFINES = -DTCL_PIPE_DLL=\"$(TCLPIPEDLLNAME)\" -DTCL_TOMMATH -DMP_PREC=4 -Dinline=__inline BASE_CFLAGS = $(cflags) $(cdebug) $(crt) $(TCL_INCLUDES) $(TCL_DEFINES) CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE TCL_CFLAGS = $(BASE_CFLAGS) $(OPTDEFINES) STUB_CFLAGS = $(cflags) $(cdebug) $(OPTDEFINES) #--------------------------------------------------------------------- # Link flags #--------------------------------------------------------------------- !if $(DEBUG) ldebug = -debug:full -debugtype:cv !else ldebug = -release -opt:ref -opt:icf,3 !endif ### Declarations common to all linker options lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug) !if $(PROFILE) lflags = $(lflags) -profile !endif !if $(ALIGN98_HACK) && !$(STATIC_BUILD) ### Align sections for PE size savings. lflags = $(lflags) -opt:nowin98 !else if !$(ALIGN98_HACK) && $(STATIC_BUILD) ### Align sections for speed in loading by choosing the virtual page size. lflags = $(lflags) -align:4096 !endif !if $(LOIMPACT) lflags = $(lflags) -ws:aggressive !endif dlllflags = $(lflags) -dll conlflags = $(lflags) -subsystem:console guilflags = $(lflags) -subsystem:windows baselibs = kernel32.lib user32.lib # Avoid 'unresolved external symbol __security_cookie' errors. # c.f. http://support.microsoft.com/?id=894573 !if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" baselibs = $(baselibs) bufferoverflowU.lib !endif #--------------------------------------------------------------------- # TclTest flags #--------------------------------------------------------------------- !if "$(TESTPAT)" != "" TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) !endif #--------------------------------------------------------------------- # Project specific targets #--------------------------------------------------------------------- release: setup $(TCLSH) $(TCLSTUBLIB) dlls core: setup $(TCLLIB) $(TCLSTUBLIB) shell: setup $(TCLSH) dlls: setup $(TCLPIPEDLL) $(TCLREGLIB) $(TCLDDELIB) all: setup $(TCLSH) $(TCLSTUBLIB) dlls $(CAT32) tcltest: setup $(TCLTEST) dlls $(CAT32) install: install-binaries install-libraries install-docs test: setup $(TCLTEST) dlls $(CAT32) set TCL_LIBRARY=$(ROOT)/library !if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" $(TCLTEST) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) -loadfile << set ::ddelib [file normalize $(TCLDDELIB:\=/)] set ::reglib [file normalize $(TCLREGLIB:\=/)] << !else @echo Please wait while the tests are collected... $(TCLTEST) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) -loadfile << > tests.log set ::ddelib [file normalize $(TCLDDELIB:\=/)] set ::reglib [file normalize $(TCLREGLIB:\=/)] << type tests.log | more !endif runtest: setup $(TCLTEST) dlls $(CAT32) set TCL_LIBRARY=$(ROOT)/library $(TCLTEST) setup: @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) !if !$(STATIC_BUILD) $(TCLIMPLIB): $(TCLLIB) !endif $(TCLLIB): $(TCLOBJS) !if $(STATIC_BUILD) $(lib32) -nologo -out:$@ @<< $** << !else $(link32) $(dlllflags) -base:@$(WINDIR)\coffbase.txt,tcl -out:$@ \ $(baselibs) @<< $** << $(_VC_MANIFEST_EMBED_DLL) -@del $*.exp !endif $(TCLSTUBLIB): $(TCLSTUBOBJS) $(lib32) -nologo -out:$@ $(TCLSTUBOBJS) $(TCLSH): $(TCLSHOBJS) $(TCLIMPLIB) $(link32) $(conlflags) -stack:2300000 -out:$@ $(baselibs) $** $(_VC_MANIFEST_EMBED_EXE) $(TCLTEST): $(TCLTESTOBJS) $(TCLIMPLIB) $(link32) $(conlflags) -stack:2300000 -out:$@ $(baselibs) $** $(_VC_MANIFEST_EMBED_EXE) $(TCLPIPEDLL): $(WINDIR)\stub16.c $(cc32) $(CON_CFLAGS) -Fo$(TMP_DIR)\ $(WINDIR)\stub16.c $(link32) $(conlflags) -out:$@ $(TMP_DIR)\stub16.obj $(baselibs) $(_VC_MANIFEST_EMBED_DLL) !if $(STATIC_BUILD) !if !$(TCL_USE_STATIC_PACKAGES) $(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj $(lib32) -nologo -out:$@ $(TMP_DIR)\tclWinDde.obj !endif !else $(TCLDDELIB): $(TMP_DIR)\tclWinDde.obj $(TCLSTUBLIB) $(link32) $(dlllflags) -base:@$(WINDIR)\coffbase.txt,tcldde -out:$@ \ $** $(baselibs) $(_VC_MANIFEST_EMBED_DLL) -@del $*.exp -@del $*.lib !endif !if $(STATIC_BUILD) !if !$(TCL_USE_STATIC_PACKAGES) $(TCLREGLIB): $(TMP_DIR)\tclWinReg.obj $(lib32) -nologo -out:$@ $(TMP_DIR)\tclWinReg.obj !endif !else $(TCLREGLIB): $(TMP_DIR)\tclWinReg.obj $(TCLSTUBLIB) $(link32) $(dlllflags) -base:@$(WINDIR)\coffbase.txt,tclreg -out:$@ \ $** $(baselibs) $(_VC_MANIFEST_EMBED_DLL) -@del $*.exp -@del $*.lib !endif $(CAT32): $(WINDIR)\cat.c $(cc32) $(CON_CFLAGS) -Fo$(TMP_DIR)\ $? $(link32) $(conlflags) -out:$@ -stack:16384 $(TMP_DIR)\cat.obj \ $(baselibs) $(_VC_MANIFEST_EMBED_EXE) #--------------------------------------------------------------------- # Regenerate the stubs files. [Development use only] #--------------------------------------------------------------------- genstubs: !if !exist($(TCLSH)) @echo Build tclsh first! !else $(TCLSH) $(TOOLSDIR:\=/)/genStubs.tcl $(GENERICDIR:\=/) \ $(GENERICDIR:\=/)/tcl.decls $(GENERICDIR:\=/)/tclInt.decls \ $(GENERICDIR:\=/)/tclTomMath.decls !endif #---------------------------------------------------------------------- # The following target generates the file generic/tclTomMath.h. # It needs to be run (and the results checked) after updating # to a new release of libtommath. #---------------------------------------------------------------------- gentommath_h: !if !exist($(TCLSH)) @echo Build tclsh first! !else $(TCLSH) "$(TOOLSDIR:\=/)/fix_tommath_h.tcl" \ "$(TOMMATHDIR:\=/)/tommath.h" \ > "$(GENERICDIR)\tclTomMath.h" !endif #--------------------------------------------------------------------- # Build the windows help file. #--------------------------------------------------------------------- TCLHLPBASE = $(PROJECT)$(VERSION) HELPFILE = $(OUT_DIR)\$(TCLHLPBASE).hlp HELPCNT = $(OUT_DIR)\$(TCLHLPBASE).cnt DOCTMP_DIR = $(OUT_DIR)\$(PROJECT)_docs HELPRTF = $(DOCTMP_DIR)\$(PROJECT).rtf MAN2HELP = $(DOCTMP_DIR)\man2help.tcl MAN2HELP2 = $(DOCTMP_DIR)\man2help2.tcl INDEX = $(DOCTMP_DIR)\index.tcl BMP = $(DOCTMP_DIR)\feather.bmp BMP_NOPATH = feather.bmp MAN2TCL = $(DOCTMP_DIR)\man2tcl.exe winhelp: docsetup $(HELPFILE) docsetup: @if not exist $(DOCTMP_DIR)\nul mkdir $(DOCTMP_DIR) $(MAN2HELP) $(MAN2HELP2) $(INDEX) $(BMP): $(TOOLSDIR)\$$(@F) @$(CPY) $(TOOLSDIR)\$(@F) $(@D) $(HELPFILE): $(HELPRTF) $(BMP) cd $(DOCTMP_DIR) start /wait hcrtf.exe -x <<$(PROJECT).hpj [OPTIONS] COMPRESS=12 Hall Zeck LCID=0x409 0x0 0x0 ; English (United States) TITLE=Tcl/Tk Reference Manual BMROOT=. CNT=$(@B).cnt HLP=$(@B).hlp [FILES] $(PROJECT).rtf [WINDOWS] main="Tcl/Tk Reference Manual",,27648,(r15263976),(r65535) [CONFIG] BrowseButtons() CreateButton(1, "Web", ExecFile("http://www.tcl.tk")) CreateButton(2, "SF", ExecFile("http://sf.net/projects/tcl")) CreateButton(3, "Wiki", ExecFile("http://wiki.tcl.tk")) CreateButton(4, "FAQ", ExecFile("http://www.purl.org/NET/Tcl-FAQ/")) << cd $(MAKEDIR) @$(CPY) "$(DOCTMP_DIR)\$(@B).hlp" "$(OUT_DIR)" @$(CPY) "$(DOCTMP_DIR)\$(@B).cnt" "$(OUT_DIR)" $(MAN2TCL): $(TOOLSDIR)\$$(@B).c $(cc32) $(TCL_CFLAGS) -Fo$(@D)\ $(TOOLSDIR)\$(@B).c $(link32) $(conlflags) -out:$@ -stack:16384 $(@D)\man2tcl.obj $(_VC_MANIFEST_EMBED_EXE) $(HELPRTF): $(MAN2TCL) $(MAN2HELP) $(MAN2HELP2) $(INDEX) $(DOCDIR)\* $(TCLSH) $(MAN2HELP) -bitmap $(BMP_NOPATH) $(PROJECT) $(VERSION) $(DOCDIR:\=/) install-docs: !if exist($(HELPFILE)) @$(CPY) "$(HELPFILE)" "$(DOC_INSTALL_DIR)\" @$(CPY) "$(HELPCNT)" "$(DOC_INSTALL_DIR)\" !endif #--------------------------------------------------------------------- # Build tclConfig.sh for the TEA build system. #--------------------------------------------------------------------- tclConfig: $(OUT_DIR)\tclConfig.sh $(OUT_DIR)\tclConfig.sh: $(WINDIR)\tclConfig.sh.in @echo Creating tclConfig.sh @nmakehlp -s << $** >$@ @TCL_DLL_FILE@ $(TCLLIBNAME) @TCL_VERSION@ $(DOTVERSION) @TCL_MAJOR_VERSION@ $(TCL_MAJOR_VERSION) @TCL_MINOR_VERSION@ $(TCL_MINOR_VERSION) @TCL_PATCH_LEVEL@ $(TCL_PATCH_LEVEL) @CC@ $(CC) @DEFS@ $(TCL_CFLAGS) @CFLAGS_DEBUG@ -nologo -c -W3 -YX -Fp$(TMP_DIR)\ -MDd @CFLAGS_OPTIMIZE@ -nologo -c -W3 -YX -Fp$(TMP_DIR)\ -MD @LDFLAGS_DEBUG@ -nologo -machine:$(MACHINE) -debug:full -debugtype:cv @LDFLAGS_OPTIMIZE@ -nologo -machine:$(MACHINE) -release -opt:ref -opt:icf,3 @TCL_DBGX@ $(SUFX) @TCL_LIB_FILE@ $(PROJECT)$(VERSION)$(SUFX).lib @TCL_NEEDS_EXP_FILE@ @LIBS@ $(baselibs) @prefix@ $(_INSTALLDIR) @exec_prefix@ $(BIN_INSTALL_DIR) @SHLIB_CFLAGS@ @STLIB_CFLAGS@ @CFLAGS_WARNING@ -W3 @EXTRA_CFLAGS@ -YX @SHLIB_LD@ $(link32) $(dlllflags) @STLIB_LD@ $(lib32) -nologo @SHLIB_LD_LIBS@ $(baselibs) @SHLIB_SUFFIX@ .dll @DL_LIBS@ @LDFLAGS@ @TCL_LD_SEARCH_FLAGS@ @LIBOBJS@ @RANLIB@ @TCL_LIB_FLAG@ @TCL_BUILD_LIB_SPEC@ @TCL_LIB_SPEC@ $(LIB_INSTALL_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib @TCL_INCLUDE_SPEC@ -I$(INCLUDE_INSTALL_DIR) @TCL_LIB_VERSIONS_OK@ @TCL_SRC_DIR@ $(ROOT) @TCL_PACKAGE_PATH@ @TCL_STUB_LIB_FILE@ $(TCLSTUBLIBNAME) @TCL_STUB_LIB_FLAG@ $(TCLSTUBLIBNAME) @TCL_STUB_LIB_SPEC@ -L$(LIB_INSTALL_DIR) $(TCLSTUBLIBNAME) @TCL_THREADS@ $(TCL_THREADS) @TCL_BUILD_STUB_LIB_SPEC@ -L$(OUT_DIR) $(TCLSTUBLIBNAME) @TCL_BUILD_STUB_LIB_PATH@ $(TCLSTUBLIB) @TCL_STUB_LIB_PATH@ $(LIB_INSTALL_DIR)\$(TCLSTUBLIBNAME) @CFG_TCL_EXPORT_FILE_SUFFIX@ $(VERSION)$(SUFX).lib @CFG_TCL_SHARED_LIB_SUFFIX@ $(VERSION)$(SUFX).dll @CFG_TCL_UNSHARED_LIB_SUFFIX@ $(VERSION)$(SUFX).lib !if $(STATIC_BUILD) @TCL_SHARED_BUILD@ 0 !else @TCL_SHARED_BUILD@ 1 !endif << #--------------------------------------------------------------------- # The following target generates the file generic/tclDate.c # from the yacc grammar found in generic/tclGetDate.y. This is # only run by hand as yacc is not available in all environments. # The name of the .c file is different than the name of the .y file # so that make doesn't try to automatically regenerate the .c file. #--------------------------------------------------------------------- gendate: bison --output-file=$(GENERICDIR)/tclDate.c \ --name-prefix=TclDate \ $(GENERICDIR)/tclGetDate.y #--------------------------------------------------------------------- # Special case object file targets #--------------------------------------------------------------------- $(TMP_DIR)\testMain.obj: $(WINDIR)\tclAppInit.c $(cc32) $(TCL_CFLAGS) -DTCL_TEST \ -DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \ -Fo$@ $? $(TMP_DIR)\tclTest.obj: $(GENERICDIR)\tclTest.c $(cc32) $(TCL_CFLAGS) -Fo$@ $? $(TMP_DIR)\tclTestObj.obj: $(GENERICDIR)\tclTestObj.c $(cc32) $(TCL_CFLAGS) -Fo$@ $? $(TMP_DIR)\tclWinTest.obj: $(WINDIR)\tclWinTest.c $(cc32) $(TCL_CFLAGS) -Fo$@ $? $(TMP_DIR)\tclPkgConfig.obj: $(GENERICDIR)\tclPkgConfig.c $(cc32) -DBUILD_tcl $(TCL_CFLAGS) \ -DCFG_INSTALL_LIBDIR="\"$(LIB_INSTALL_DIR:\=\\)\"" \ -DCFG_INSTALL_BINDIR="\"$(BIN_INSTALL_DIR:\=\\)\"" \ -DCFG_INSTALL_SCRDIR="\"$(SCRIPT_INSTALL_DIR:\=\\)\"" \ -DCFG_INSTALL_INCDIR="\"$(INCLUDE_INSTALL_DIR:\=\\)\"" \ -DCFG_INSTALL_DOCDIR="\"$(DOC_INSTALL_DIR:\=\\)\"" \ -DCFG_RUNTIME_LIBDIR="\"$(LIB_INSTALL_DIR:\=\\)\"" \ -DCFG_RUNTIME_BINDIR="\"$(BIN_INSTALL_DIR:\=\\)\"" \ -DCFG_RUNTIME_SCRDIR="\"$(SCRIPT_INSTALL_DIR:\=\\)\"" \ -DCFG_RUNTIME_INCDIR="\"$(INCLUDE_INSTALL_DIR:\=\\)\"" \ -DCFG_RUNTIME_DOCDIR="\"$(DOC_INSTALL_DIR:\=\\)\"" \ -Fo$@ $? $(TMP_DIR)\tclAppInit.obj: $(WINDIR)\tclAppInit.c $(cc32) $(TCL_CFLAGS) \ -DTCL_USE_STATIC_PACKAGES=$(TCL_USE_STATIC_PACKAGES) \ -Fo$@ $? ### The following objects should be built using the stub interfaces ### *ALL* extensions need to built with -DTCL_THREADS=1 $(TMP_DIR)\tclWinReg.obj: $(WINDIR)\tclWinReg.c !if $(STATIC_BUILD) $(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DSTATIC_BUILD -Fo$@ $? !else $(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DUSE_TCL_STUBS -Fo$@ $? !endif $(TMP_DIR)\tclWinDde.obj: $(WINDIR)\tclWinDde.c !if $(STATIC_BUILD) $(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DSTATIC_BUILD -Fo$@ $? !else $(cc32) $(TCL_CFLAGS) -DTCL_THREADS=1 -DUSE_TCL_STUBS -Fo$@ $? !endif ### The following objects are part of the stub library and should not ### be built as DLL objects. -Zl is used to avoid a dependency on any ### specific C run-time. $(TMP_DIR)\tclStubLib.obj: $(GENERICDIR)\tclStubLib.c $(cc32) $(STUB_CFLAGS) -Zl -DSTATIC_BUILD $(TCL_INCLUDES) -Fo$@ $? #--------------------------------------------------------------------- # Generate the source dependencies. Having dependency rules will # improve incrimental build accuracy without having to resort to a # full rebuild just because some non-global header file like tclCompile.h # was changed. These rules aren't needed when building from scratch. #--------------------------------------------------------------------- depend: !if !exist($(TCLSH)) @echo Build tclsh first! !else $(TCLSH) $(TOOLSDIR:\=/)/mkdepend.tcl -vc32 -out:"$(OUT_DIR)\depend.mk" \ -passthru:"-DBUILD_tcl $(TCL_INCLUDES)" $(GENERICDIR),$$(GENERICDIR) \ $(COMPATDIR),$$(COMPATDIR) $(TOMMATHDIR),$$(TOMMATHDIR) $(WINDIR),$$(WINDIR) @<< $(TCLOBJS) << !endif #" emacs fix #--------------------------------------------------------------------- # Dependency rules #--------------------------------------------------------------------- $(GENERICDIR)\regcomp.c: \ $(GENERICDIR)\regguts.h \ $(GENERICDIR)\regc_lex.c \ $(GENERICDIR)\regc_color.c \ $(GENERICDIR)\regc_nfa.c \ $(GENERICDIR)\regc_cvec.c \ $(GENERICDIR)\regc_locale.c $(GENERICDIR)\regcustom.h: \ $(GENERICDIR)\tclInt.h \ $(GENERICDIR)\tclPort.h \ $(GENERICDIR)\regex.h $(GENERICDIR)\regexec.c: \ $(GENERICDIR)\rege_dfa.c \ $(GENERICDIR)\regguts.h $(GENERICDIR)\regerror.c: $(GENERICDIR)\regguts.h $(GENERICDIR)\regfree.c: $(GENERICDIR)\regguts.h $(GENERICDIR)\regfronts.c: $(GENERICDIR)\regguts.h $(GENERICDIR)\regguts.h: $(GENERICDIR)\regcustom.h !if exist("$(OUT_DIR)\depend.mk") !include "$(OUT_DIR)\depend.mk" !message *** Dependency rules in effect. !else !message *** Dependency rules are not being used. !endif ### add a spacer in the output !message #--------------------------------------------------------------------- # Implicit rules #--------------------------------------------------------------------- {$(WINDIR)}.c{$(TMP_DIR)}.obj:: $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<< $< << {$(TOMMATHDIR)}.c{$(TMP_DIR)}.obj:: $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<< $< << {$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<< $< << {$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: $(cc32) $(TCL_CFLAGS) -DBUILD_tcl -Fo$(TMP_DIR)\ @<< $< << {$(WINDIR)}.rc{$(TMP_DIR)}.res: $(rc32) -fo $@ -r -i "$(GENERICDIR)" \ -d DEBUG=$(DEBUG) -d UNCHECKED=$(UNCHECKED) \ -d TCL_THREADS=$(TCL_THREADS) \ -d STATIC_BUILD=$(STATIC_BUILD) \ $< .SUFFIXES: .SUFFIXES:.c .rc #--------------------------------------------------------------------- # Installation. #--------------------------------------------------------------------- install-binaries: @echo Installing to '$(_INSTALLDIR)' @echo Installing $(TCLLIBNAME) !if "$(TCLLIB)" != "$(TCLIMPLIB)" @$(CPY) "$(TCLLIB)" "$(BIN_INSTALL_DIR)\" !endif @$(CPY) "$(TCLIMPLIB)" "$(LIB_INSTALL_DIR)\" !if exist($(TCLSH)) @echo Installing $(TCLSHNAME) @$(CPY) "$(TCLSH)" "$(BIN_INSTALL_DIR)\" !endif !if exist($(TCLPIPEDLL)) @echo Installing $(TCLPIPEDLLNAME) @$(CPY) "$(TCLPIPEDLL)" "$(BIN_INSTALL_DIR)\" !endif @echo Installing $(TCLSTUBLIBNAME) @$(CPY) "$(TCLSTUBLIB)" "$(LIB_INSTALL_DIR)\" #" emacs fix install-libraries: tclConfig install-msgs install-tzdata @if not exist "$(SCRIPT_INSTALL_DIR)$(NULL)" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)" @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8$(NULL)" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8" @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.2$(NULL)" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.2" @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.3$(NULL)" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.3" @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4$(NULL)" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4" @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform$(NULL)" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform" @if not exist "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5$(NULL)" \ $(MKDIR) "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5" @echo Installing header files @$(CPY) "$(GENERICDIR)\tcl.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclDecls.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclPlatDecls.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclTomMath.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(GENERICDIR)\tclTomMathDecls.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(TOMMATHDIR)\tommath_class.h" "$(INCLUDE_INSTALL_DIR)\" @$(CPY) "$(TOMMATHDIR)\tommath_superclass.h" "$(INCLUDE_INSTALL_DIR)\" @echo Installing library files to $(SCRIPT_INSTALL_DIR) @$(CPY) "$(ROOT)\library\history.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\init.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\clock.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\tm.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\parray.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\safe.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\tclIndex" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\package.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\word.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(ROOT)\library\auto.tcl" "$(SCRIPT_INSTALL_DIR)\" @$(CPY) "$(OUT_DIR)\tclConfig.sh" "$(LIB_INSTALL_DIR)\" @echo Installing library http1.0 directory @$(CPY) "$(ROOT)\library\http1.0\*.tcl" \ "$(SCRIPT_INSTALL_DIR)\http1.0\" @echo Installing library opt0.4 directory @$(CPY) "$(ROOT)\library\opt\*.tcl" \ "$(SCRIPT_INSTALL_DIR)\opt0.4\" @echo Installing package http $(PKG_HTTP_VER) as a Tcl Module @$(COPY) "$(ROOT)\library\http\http.tcl" \ "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\http-$(PKG_HTTP_VER).tm" @echo Installing package msgcat $(PKG_MSGCAT_VER) as a Tcl Module @$(COPY) "$(ROOT)\library\msgcat\msgcat.tcl" \ "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5\msgcat-$(PKG_MSGCAT_VER).tm" @echo Installing package tcltest $(PKG_TCLTEST_VER) as a Tcl Module @$(COPY) "$(ROOT)\library\tcltest\tcltest.tcl" \ "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.5\tcltest-$(PKG_TCLTEST_VER).tm" @echo Installing package platform $(PKG_PLATFORM_VER) as a Tcl Module @$(COPY) "$(ROOT)\library\platform\platform.tcl" \ "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform-$(PKG_PLATFORM_VER).tm" @echo Installing package platform::shell $(PKG_SHELL_VER) as a Tcl Module @$(COPY) "$(ROOT)\library\platform\shell.tcl" \ "$(SCRIPT_INSTALL_DIR)\..\tcl8\8.4\platform\shell-$(PKG_SHELL_VER).tm" @echo Installing $(TCLDDELIBNAME) !if $(STATIC_BUILD) @$(CPY) "$(TCLDDELIB)" "$(LIB_INSTALL_DIR)\" !else @$(CPY) "$(TCLDDELIB)" "$(LIB_INSTALL_DIR)\dde$(DDEDOTVERSION)\" @$(CPY) "$(ROOT)\library\dde\pkgIndex.tcl" \ "$(LIB_INSTALL_DIR)\dde$(DDEDOTVERSION)\" !endif @echo Installing $(TCLREGLIBNAME) !if $(STATIC_BUILD) @$(CPY) "$(TCLREGLIB)" "$(LIB_INSTALL_DIR)\" !else @$(CPY) "$(TCLREGLIB)" "$(LIB_INSTALL_DIR)\reg$(REGDOTVERSION)\" @$(CPY) "$(ROOT)\library\reg\pkgIndex.tcl" \ "$(LIB_INSTALL_DIR)\reg$(REGDOTVERSION)\" !endif @echo Installing encodings @$(CPY) "$(ROOT)\library\encoding\*.enc" \ "$(SCRIPT_INSTALL_DIR)\encoding\" #" emacs fix install-tzdata: @echo Installing time zone data @set TCL_LIBRARY=$(ROOT)/library @$(TCLSH) "$(ROOT)/tools/installData.tcl" \ "$(ROOT)/library/tzdata" "$(SCRIPT_INSTALL_DIR)/tzdata" install-msgs: @echo Installing message catalogs @set TCL_LIBRARY=$(ROOT)/library @$(TCLSH) "$(ROOT)/tools/installData.tcl" \ "$(ROOT)/library/msgs" "$(SCRIPT_INSTALL_DIR)/msgs" #--------------------------------------------------------------------- # Clean up #--------------------------------------------------------------------- tidy: !if "$(TCLLIB)" != "$(TCLIMPLIB)" @echo Removing $(TCLLIB) ... @if exist $(TCLLIB) del $(TCLLIB) !endif @echo Removing $(TCLIMPLIB) ... @if exist $(TCLIMPLIB) del $(TCLIMPLIB) @echo Removing $(TCLSH) ... @if exist $(TCLSH) del $(TCLSH) @echo Removing $(TCLTEST) ... @if exist $(TCLTEST) del $(TCLTEST) @echo Removing $(TCLDDELIB) ... @if exist $(TCLDDELIB) del $(TCLDDELIB) @echo Removing $(TCLREGLIB) ... @if exist $(TCLREGLIB) del $(TCLREGLIB) clean: @echo Cleaning $(TMP_DIR)\* ... @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) @echo Cleaning $(WINDIR)\nmakehlp.obj ... @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj @echo Cleaning $(WINDIR)\nmakehlp.exe ... @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe @echo Cleaning $(WINDIR)\_junk.pch ... @if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch @echo Cleaning $(WINDIR)\vercl.x ... @if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x @echo Cleaning $(WINDIR)\vercl.i ... @if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i @echo Cleaning $(WINDIR)\versions.vc ... @if exist $(WINDIR)\versions.vc del $(WINDIR)\versions.vc hose: @echo Hosing $(OUT_DIR)\* ... @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)